diff options
author | Thomas Chou <thomas@wytron.com.tw> | 2010-05-28 10:56:50 +0800 |
---|---|---|
committer | Scott McNutt <smcnutt@psyent.com> | 2010-05-28 10:56:04 -0400 |
commit | 1117cbf2adac59050af1751af6c6a524afa5c3ef (patch) | |
tree | a53832c1bcea3180e6830e8b3f9cb41adeed2d44 /include/configs/DK1S10.h | |
parent | 6803336c9f21ba428f5c1b1cf825bbbac0a762e5 (diff) | |
download | u-boot-imx-1117cbf2adac59050af1751af6c6a524afa5c3ef.zip u-boot-imx-1117cbf2adac59050af1751af6c6a524afa5c3ef.tar.gz u-boot-imx-1117cbf2adac59050af1751af6c6a524afa5c3ef.tar.bz2 |
nios: remove nios-32 arch
The nios-32 arch is obsolete and broken. So it is removed.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Diffstat (limited to 'include/configs/DK1S10.h')
-rw-r--r-- | include/configs/DK1S10.h | 561 |
1 files changed, 0 insertions, 561 deletions
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h deleted file mode 100644 index 6e78861..0000000 --- a/include/configs/DK1S10.h +++ /dev/null @@ -1,561 +0,0 @@ -/* - * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net> - * Stephan Linz <linz@li-pro.net> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*********************************************************************** - * Include the whole NIOS CPU configuration. - * - * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!! - * - ***********************************************************************/ - -#if defined(CONFIG_NIOS_SAFE_32) -#include <configs/DK1S10_safe_32.h> -#elif defined(CONFIG_NIOS_STANDARD_32) -#include <configs/DK1S10_standard_32.h> -#elif defined(CONFIG_NIOS_MTX_LDK_20) -#include <configs/DK1S10_mtx_ldk_20.h> -#else -#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration -#endif - -/*------------------------------------------------------------------------ - * BOARD/CPU -- TOP-LEVEL - *----------------------------------------------------------------------*/ -#define CONFIG_NIOS 1 /* NIOS-32 core */ -#define CONFIG_DK1S10 1 /* Stratix DK-1S10 board*/ -#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */ -#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ - -/*------------------------------------------------------------------------ - * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM) - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0) - -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE -#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE - -#else -#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config -#endif - -#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE) - -#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE -#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE - -#else - -#undef CONFIG_SYS_SRAM_BASE -#undef CONFIG_SYS_SRAM_SIZE - -#endif - -#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE - -/*------------------------------------------------------------------------ - * MEMORY ORGANIZATION - For the most part, you can put things pretty - * much anywhere. This is pretty flexible for Nios. So here we make some - * arbitrary choices & assume that the monitor is placed at the end of - * a memory resource (so you must make sure TEXT_BASE is chosen - * appropriately). - * - * -The heap is placed below the monitor. - * -Global data is placed below the heap. - * -The stack is placed below global data (&grows down). - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET - -/*------------------------------------------------------------------------ - * FLASH (AM29LV065D) - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) - -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */ - -#else -#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * ENVIRONMENT - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) - -#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */ - -#if defined(CONFIG_NIOS_STANDARD_32) -#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Mem addr of env */ -#elif defined(CONFIG_NIOS_MTX_LDK_20) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -#else -#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR -#endif - -#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ -#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */ - -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */ -#endif - -/*------------------------------------------------------------------------ - * CONSOLE - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0) - -#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */ -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ - -#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0) -#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ -#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR -#else -#undef CONFIG_SYS_NIOS_FIXEDBAUD -#define CONFIG_BAUDRATE 115200 -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#else -#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT, - * so an avalon bus timer is required. - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER) - -#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0) - -#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */ -#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ - -#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ - -#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ) -#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ -#endif - -#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ - -#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */ - -#if (CONFIG_SYS_HZ <= 1000) -#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 -#endif - -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - -#else -#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct -#endif - -#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1) - -#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */ -#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ - -#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ - -#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ) -#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ -#endif - -#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ - -#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */ - -#if (CONFIG_SYS_HZ <= 1000) -#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) -#else -#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 -#endif - -#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) - -#else -#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct -#endif - -#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */ - -#else -#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config -#endif - -/*------------------------------------------------------------------------ - * Ethernet -- needs work! - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */ - -#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ -#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ -#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) -#define CONFIG_SMC_USE_32_BIT 1 -#else /* no */ -#undef CONFIG_SMC_USE_32_BIT -#endif - -#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */ - - /********************************************/ - /* !!! CS8900 is __not__ tested on NIOS !!! */ - /********************************************/ -#define CONFIG_NET_MULTI -#define CONFIG_CS8900 /* Using CS8900 */ -#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \ - CONFIG_SYS_NIOS_CPU_LAN0_OFFS) - -#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) -#undef CONFIG_CS8900_BUS16 -#define CONFIG_CS8900_BUS32 -#else /* no */ -#define CONFIG_CS8900_BUS16 -#undef CONFIG_CS8900_BUS32 -#endif - -#else -#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config -#endif - -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.2.21 -#define CONFIG_SERVERIP 192.168.2.16 - -#else -#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h -#endif - -/*------------------------------------------------------------------------ - * STATUS LEDs - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO) - -#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2) - -#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2 -#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS -#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1) -#define STATUS_LED_WRONLY 1 -#else -#undef STATUS_LED_WRONLY -#endif - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9) - -#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h - -#else -#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case -#endif - -#define CONFIG_STATUS_LED 1 /* enable status led driver */ - -#define STATUS_LED_BIT (1 << 0) /* LED[0] */ -#define STATUS_LED_STATE STATUS_LED_BLINKING -#define STATUS_LED_BOOT_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ -#define STATUS_LED_BOOT 0 /* boot LED */ - -#if (STATUS_LED_BITS > 1) -#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */ -#define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 50) /* ca. 5 Hz */ -#define STATUS_LED_RED 1 /* fail LED */ -#endif - -#if (STATUS_LED_BITS > 2) -#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */ -#define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ -#define STATUS_LED_YELLOW 2 /* info LED */ -#endif - -#if (STATUS_LED_BITS > 3) -#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */ -#define STATUS_LED_STATE3 STATUS_LED_OFF -#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ -#define STATUS_LED_GREEN 3 /* info LED */ -#endif - -#define STATUS_LED_PAR 1 /* makes status_led.h happy */ - -#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */ - -/*------------------------------------------------------------------------ - * SEVEN SEGMENT LED DISPLAY - *----------------------------------------------------------------------*/ -#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO) - -#if (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3) - -#define SEVENSEG_BASE CONFIG_SYS_NIOS_CPU_PIO3 -#define SEVENSEG_BITS CONFIG_SYS_NIOS_CPU_PIO3_BITS -#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */ - -#if (CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1) -#define SEVENSEG_WRONLY 1 -#else -#undef SEVENSEG_WRONLY -#endif - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h - -#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9) - -#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h - -#else -#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case -#endif - -#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */ - -/* - * Dual 7-Segment Display pin assignment -- read more in your - * "Nios Development Board Reference Manual" - * - * - * (U8) HI:D[15..8] (U9) LO:D[7..0] - * ______ ______ - * | D14 | | D6 | - * | | | | - * D9| |D13 D1| |D5 - * |______| |______| ___ - * | D8 | | D0 | | A | - * | | | | F|___|B - * D10| |D12 D2| |D4 | G | - * |______| |______| E|___|C - * D11 * D3 * D * - * D15 D7 DP - * - */ -#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */ -#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */ -#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */ -#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */ -#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */ -#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */ -#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */ -#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */ -#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */ - -#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_DISPLAY -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_REISER -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG - -/*------------------------------------------------------------------------ - * KGDB - *----------------------------------------------------------------------*/ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 9600 -#endif - -/*------------------------------------------------------------------------ - * MISC - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "DK1S10 > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* Default load address */ -#if (CONFIG_SYS_SRAM_SIZE != 0) - -/* default in SRAM */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE - -#elif (CONFIG_SYS_SDRAM_SIZE != 0) - -/* default in SDRAM */ -#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE) -#else -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE -#endif - -#else -#undef CONFIG_SYS_LOAD_ADDR /* force error break */ -#endif - - -/* MEM test area */ -#if (CONFIG_SYS_SDRAM_SIZE != 0) - -/* SDRAM begin to stack area (1MB stack) */ -#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE) -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) -#else -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) -#endif - -#else -#undef CONFIG_SYS_MEMTEST_START /* force error break */ -#undef CONFIG_SYS_MEMTEST_END -#endif - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "" -#define MTDPARTS_DEFAULT "" -*/ - -#endif /* __CONFIG_H */ |