Merge branch 'fixes' into cleanups

Conflicts:

	board/atmel/atngw100/atngw100.c
	board/atmel/atstk1000/atstk1000.c
	cpu/at32ap/at32ap700x/gpio.c
	include/asm-avr32/arch-at32ap700x/clk.h
	include/configs/atngw100.h
	include/configs/atstk1002.h
	include/configs/atstk1003.h
	include/configs/atstk1004.h
	include/configs/atstk1006.h
	include/configs/favr-32-ezkit.h
	include/configs/hammerhead.h
	include/configs/mimc200.h

1 files changed, 62 insertions, 60 deletions

diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 604779a..f1608e1 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -39,6 +39,8 @@
 #define CONFIG_SYS_CLK_FREQ 25000000
 #define CONFIG_BAUDRATE		9600
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		    1	/* MII PHY management */
 #define	CONFIG_PHY_ADDR		1	/* PHY address; handling of ENET */
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* early setup for 405gp */
@@ -53,7 +55,7 @@
 
 /* Bootcmd is overridden by the bootscript in board/cray/L1
  */
-#define	CFG_AUTOLOAD		"no"
+#define	CONFIG_SYS_AUTOLOAD		"no"
 #define CONFIG_BOOTCOMMAND	"dhcp"
 
 /*
@@ -63,15 +65,15 @@
  */
 #define CONFIG_HARD_I2C         1		/* hardware support for i2c */
 #define CONFIG_SDRAM_BANK0		1
-#define CFG_I2C_SPEED		    400000	/* I2C speed and slave address	*/
-#define CFG_I2C_SLAVE		    0x7F
-#define CFG_I2C_EEPROM_ADDR     0x57
-#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_SPEED		    400000	/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		    0x7F
+#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_IDENT_STRING     "Cray L1"
 #define CONFIG_ENV_OVERWRITE     1
-#define	CFG_HZ		             1000	/* decrementer freq: 1 ms ticks	*/
-#define CFG_HUSH_PARSER			1
-#define CFG_PROMPT_HUSH_PS2		"> "
+#define	CONFIG_SYS_HZ		             1000	/* decrementer freq: 1 ms ticks	*/
+#define CONFIG_SYS_HUSH_PARSER			1
+#define CONFIG_SYS_PROMPT_HUSH_PS2		"> "
 #define CONFIG_AUTOSCRIPT		1
 
 
@@ -123,73 +125,73 @@
  * from the DCR anyway, so its kinda-tied to the above ref. clock which in turn
  * drives the system clock.
  */
-#define CFG_BASE_BAUD       403225
-#define CFG_BAUDRATE_TABLE  \
+#define CONFIG_SYS_BASE_BAUD       403225
+#define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_PROMPT	"=> "				/* Monitor Command Prompt	*/
-#define	CFG_CBSIZE	256				/* Console I/O Buffer Size	*/
-#define CFG_BARGSIZE	CFG_CBSIZE			/* Boot Argument Buffer Size	*/
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define CFG_MAXARGS	16				/* max number of command args	*/
+#define CONFIG_SYS_PROMPT	"=> "				/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE	256				/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE			/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16				/* max number of command args	*/
 
 
-#define CFG_LOAD_ADDR		0x100000	/* where to load what we get from TFTP */
-#define CFG_TFTP_LOADADDR	CFG_LOAD_ADDR
-#define CFG_EXTBDINFO		1		/* To use extended board_into (bd_t) */
-#define CFG_DRAM_TEST		1
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* where to load what we get from TFTP */
+#define CONFIG_SYS_TFTP_LOADADDR	CONFIG_SYS_LOAD_ADDR
+#define CONFIG_SYS_EXTBDINFO		1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_DRAM_TEST		1
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE		0x00000000
-#define CFG_FLASH_BASE		0xFFC00000
-#define CFG_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xFFC00000
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
 
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
+#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	 1		/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	 64		/* max number of sectors on one chip	*/
-#define CFG_FLASH_ERASE_TOUT 120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT 500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	 1		/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	 64		/* max number of sectors on one chip	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500	/* Timeout for Flash Write (in ms)	*/
 
 /* BEG ENVIRONNEMENT FLASH: needs to be a whole FlashSector  */
-#define CFG_ENV_OFFSET		0x3c8000
-#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
-#define	CFG_ENV_SIZE		0x1000	 /* Total Size of Environment area	*/
-#define CFG_ENV_SECT_SIZE	0x10000	 /* see README - env sector total size	*/
+#define CONFIG_ENV_OFFSET		0x3c8000
+#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
+#define	CONFIG_ENV_SIZE		0x1000	 /* Total Size of Environment area	*/
+#define CONFIG_ENV_SECT_SIZE	0x10000	 /* see README - env sector total size	*/
 
 /* Memory tests: U-BOOT relocates itself to the top of Ram, so its at
  * 32meg-(128k+some_malloc_space+copy-of-ENV sector)..
  */
-#define CFG_SDRAM_SIZE		32		/* megs of ram */
-#define CFG_MEMTEST_START	0x2000  /* memtest works from the end of */
+#define CONFIG_SYS_SDRAM_SIZE		32		/* megs of ram */
+#define CONFIG_SYS_MEMTEST_START	0x2000  /* memtest works from the end of */
 									/* the exception vector table */
 									/* to the end of the DRAM  */
 									/* less monitor and malloc area */
-#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
-#define CFG_MALLOC_LEN		(128 << 10)	/* 128k for malloc space */
-#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
-				+ CFG_MALLOC_LEN \
-				+ CFG_ENV_SECT_SIZE \
-				+ CFG_STACK_USAGE )
-
-#define CFG_MEMTEST_END		(CFG_SDRAM_SIZE * 1024 * 1024 - CFG_MEM_END_USAGE)
+#define CONFIG_SYS_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* 128k for malloc space */
+#define CONFIG_SYS_MEM_END_USAGE	( CONFIG_SYS_MONITOR_LEN \
+				+ CONFIG_SYS_MALLOC_LEN \
+				+ CONFIG_ENV_SECT_SIZE \
+				+ CONFIG_SYS_STACK_USAGE )
+
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 - CONFIG_SYS_MEM_END_USAGE)
 /* END ENVIRONNEMENT FLASH */
 
 /*
@@ -198,7 +200,7 @@
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
 
 
 /*-----------------------------------------------------------------------
@@ -206,23 +208,23 @@
  */
 #if 1
 /* On Chip Memory location */
-#define CFG_TEMP_STACK_OCM	1
-#define CFG_OCM_DATA_ADDR	0xF0000000
-#define CFG_OCM_DATA_SIZE	0x1000
-
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CFG_GBL_DATA_SIZE      256  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_TEMP_STACK_OCM	1
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_GBL_DATA_SIZE      256  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 #else
-#define CFG_OCM_DATA_ADDR	0xF0000000
-#define CFG_OCM_DATA_SIZE	0x1000
-#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
-#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE	/* End of On Chip SRAM	     */
-#define CFG_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE	/* End of On Chip SRAM	     */
+#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 #endif
 
 /*-----------------------------------------------------------------------