summaryrefslogtreecommitdiff
path: root/include/configs/CPC45.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-12-31 09:32:47 +0000
committerwdenk <wdenk>2004-12-31 09:32:47 +0000
commite2ffd59b4d93c9149de1caaa087371b0cfc512c9 (patch)
tree86cfb6e30bec1686253b0542d76f57c5d62d183a /include/configs/CPC45.h
parent400ab719c6025c176c50bcdff342384222d7424b (diff)
downloadu-boot-imx-e2ffd59b4d93c9149de1caaa087371b0cfc512c9.zip
u-boot-imx-e2ffd59b4d93c9149de1caaa087371b0cfc512c9.tar.gz
u-boot-imx-e2ffd59b4d93c9149de1caaa087371b0cfc512c9.tar.bz2
* Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for additional ethernet addresses. * Cleanup drivers/i82365.c - avoid duplication of code * Fix bogus "cannot span across banks" flash error message * Add support for CompactFlash for the CPC45 Board.
Diffstat (limited to 'include/configs/CPC45.h')
-rw-r--r--include/configs/CPC45.h49
1 files changed, 46 insertions, 3 deletions
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index 5a00133..8de9819 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -50,8 +50,6 @@
#define CONFIG_BAUDRATE 9600
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#define CONFIG_BOOTDELAY 5
@@ -63,7 +61,10 @@
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
+ CFG_CMD_FAT | \
+ CFG_CMD_FLASH | \
CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
CFG_CMD_PCI | \
CFG_CMD_SDRAM )
@@ -344,7 +345,7 @@
#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */
#define BCSR_BASE 0x80600000 /* board control / status registers */
#define DISPLAY_BASE 0x80600040 /* DISPLAY base */
-#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */
+#define PCMCIA_MEM_BASE 0x83000000 /* PCMCIA memory window base */
#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */
@@ -464,4 +465,46 @@
#define PCI_ENET0_MEMADDR 0x82000000
#define PCI_PLX9030_IOADDR 0x82100000
#define PCI_PLX9030_MEMADDR 0x82100000
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_I82365
+
+#define CFG_PCMCIA_MEM_ADDR PCMCIA_MEM_BASE
+#define CFG_PCMCIA_MEM_SIZE 0x1000
+
+#define CONFIG_PCMCIA_SLOT_A
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_RESET /* reset for IDE not supported */
+#define CONFIG_IDE_LED /* LED for IDE is supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+#define CONFIG_HMI10
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+#define CFG_ATA_DATA_OFFSET CFG_PCMCIA_MEM_SIZE
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET CFG_PCMCIA_MEM_SIZE
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x400)
+
+#define CONFIG_DOS_PARTITION
+
#endif /* __CONFIG_H */