summaryrefslogtreecommitdiff
path: root/include/configs/CATcenter.h
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2010-09-10 16:29:37 +0200
committerStefan Roese <sr@denx.de>2010-09-23 08:32:02 +0200
commit6aa9195daecf18f682a825213a08d28224644b93 (patch)
tree04a95127bdfbe89d026ff57ff166eb784c617b0f /include/configs/CATcenter.h
parente6e1fb3050351ae96153b1ba6a5bd0a2d745794b (diff)
downloadu-boot-imx-6aa9195daecf18f682a825213a08d28224644b93.zip
u-boot-imx-6aa9195daecf18f682a825213a08d28224644b93.tar.gz
u-boot-imx-6aa9195daecf18f682a825213a08d28224644b93.tar.bz2
ppc4xx: Fix CATcenter build
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include/configs/CATcenter.h')
-rw-r--r--include/configs/CATcenter.h23
1 files changed, 2 insertions, 21 deletions
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 229a513..002435e 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -105,6 +105,7 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+#define CONFIG_PPC4xx_EMAC
#undef CONFIG_EXT_PHY
#define CONFIG_NET_MULTI 1
@@ -398,6 +399,7 @@
* I2C EEPROM (CAT24WC16) for environment
*/
#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
@@ -410,16 +412,6 @@
/* last 4 bits of the address */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
- /* have only 8kB, 16kB is save here */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* ... */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Init Memory Controller:
*
@@ -570,17 +562,6 @@
#define DIMM_READ_ADDR 0xAB
#define DIMM_WRITE_ADDR 0xAA
-#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */
-#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */
-#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */
-#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register */
-#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */
-#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */
-#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */
-#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */
-#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */
-#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */
-
/* Defines for CPC0_PLLMR1 Register fields */
#define PLL_ACTIVE 0x80000000
#define CPC0_PLLMR1_SSCS 0x80000000