Add support for CATcenter board (based on PPChameleon ME module)

1 files changed, 703 insertions, 0 deletions

diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
new file mode 100644
index 0000000..4f81cde
--- /dev/null
+++ b/include/configs/CATcenter.h
@@ -0,0 +1,703 @@
+/*
+ * (C) Copyright 2004 DENX Software Engineering,
+ *     Wolfgang Grandegger <wg@denx.de>
+ * (C) Copyright 2003
+ *     DAVE Srl
+ *
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * Credits: Stefan Roese, Wolfgang Denk
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_PPCHAMELEON_MODULE_BA	0	/* Basic    Model */
+#define CONFIG_PPCHAMELEON_MODULE_ME	1	/* Medium   Model */
+#define CONFIG_PPCHAMELEON_MODULE_HI	2	/* High-End Model */
+#ifndef CONFIG_PPCHAMELEON_MODULE_MODEL
+#define CONFIG_PPCHAMELEON_MODULE_MODEL CONFIG_PPCHAMELEON_MODULE_BA
+#endif
+
+/*
+ * Debug stuff
+ */
+#undef	__DEBUG_START_FROM_SRAM__
+#define __DISABLE_MACHINE_EXCEPTION__
+
+#ifdef __DEBUG_START_FROM_SRAM__
+#define CFG_DUMMY_FLASH_SIZE		1024*1024*4
+#endif
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405EP		1	/* This is a PPC405 CPU		*/
+#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
+#define CONFIG_PPCHAMELEONEVB	1	/* ...on a PPChameleonEVB board */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
+#define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
+
+#define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll	*/
+
+#define CONFIG_UART1_CONSOLE	1	/* Use second UART	*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#undef	CONFIG_BOOTARGS
+
+/* Ethernet stuff */
+#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */
+#define CONFIG_ETHADDR	00:50:C2:1E:AF:FC
+#define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FB
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+
+#undef CONFIG_EXT_PHY
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+#ifndef	 CONFIG_EXT_PHY
+#define CONFIG_PHY_ADDR		1	/* PHY address			*/
+#else
+#define CONFIG_PHY_ADDR		2	/* PHY address			*/
+#endif
+#define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ
+
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NAND	| \
+				CFG_CMD_JFFS2)
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
+#define CFG_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address		*/
+
+#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+
+#undef	CFG_HUSH_PARSER			/* use "hush" command parser	*/
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_DEVICE_NULLDEV	1	/* include nulldev device	*/
+
+#define CFG_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#undef	CFG_EXT_SERIAL_CLOCK		/* no external serial clock used */
+#define CFG_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
+#define CFG_BASE_BAUD		691200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE	\
+	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
+	 57600, 115200, 230400, 460800, 921600 }
+
+#define CFG_LOAD_ADDR	0x100000	/* default load address */
+#define CFG_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+
+/*-----------------------------------------------------------------------
+ * NAND-FLASH stuff
+ *-----------------------------------------------------------------------
+ */
+#define CFG_NAND0_BASE 0xFF400000
+#define CFG_NAND1_BASE 0xFF000000
+
+/* For CATcenter there is only NAND on the module */
+#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
+#define SECTORSIZE 512
+#define NAND_NO_RB
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
+#define NAND_ChipID_UNKNOWN	0x00
+#define NAND_MAX_FLOORS 1
+#define NAND_MAX_CHIPS 1
+
+#define CFG_NAND0_CE  (0x80000000 >> 1)	 /* our CE is GPIO1 */
+#define CFG_NAND0_CLE (0x80000000 >> 2)	 /* our CLE is GPIO2 */
+#define CFG_NAND0_ALE (0x80000000 >> 3)	 /* our ALE is GPIO3 */
+#define CFG_NAND0_RDY (0x80000000 >> 4)	 /* our RDY is GPIO4 */
+
+#define CFG_NAND1_CE  (0x80000000 >> 14)  /* our CE is GPIO14 */
+#define CFG_NAND1_CLE (0x80000000 >> 15)  /* our CLE is GPIO15 */
+#define CFG_NAND1_ALE (0x80000000 >> 16)  /* our ALE is GPIO16 */
+#define CFG_NAND1_RDY (0x80000000 >> 31)  /* our RDY is GPIO31 */
+
+
+#define NAND_DISABLE_CE(nand) do \
+{ \
+	switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \
+	{ \
+	    case CFG_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \
+		break; \
+	    case CFG_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_CE); \
+		break; \
+	} \
+} while(0)
+
+#define NAND_ENABLE_CE(nand) do \
+{ \
+	switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \
+	{ \
+	    case CFG_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \
+		break; \
+	    case CFG_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_CE); \
+		break; \
+	} \
+} while(0)
+
+
+#define NAND_CTL_CLRALE(nandptr) do \
+{ \
+	switch((unsigned long)nandptr) \
+	{ \
+	    case CFG_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_ALE); \
+		break; \
+	    case CFG_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_ALE); \
+		break; \
+	} \
+} while(0)
+
+#define NAND_CTL_SETALE(nandptr) do \
+{ \
+	switch((unsigned long)nandptr) \
+	{ \
+	    case CFG_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_ALE); \
+		break; \
+	    case CFG_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_ALE); \
+		break; \
+	} \
+} while(0)
+
+#define NAND_CTL_CLRCLE(nandptr) do \
+{ \
+	switch((unsigned long)nandptr) \
+	{ \
+	    case CFG_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CLE); \
+		break; \
+	    case CFG_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND1_CLE); \
+		break; \
+	} \
+} while(0)
+
+#define NAND_CTL_SETCLE(nandptr) do { \
+	switch((unsigned long)nandptr) { \
+	case CFG_NAND0_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \
+		break; \
+	case CFG_NAND1_BASE: \
+		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND1_CLE); \
+		break; \
+	} \
+} while(0)
+
+#ifdef NAND_NO_RB
+/* constant delay (see also tR in the datasheet) */
+#define NAND_WAIT_READY(nand) do { \
+	udelay(12); \
+} while (0)
+#else
+/* use the R/B pin */
+/* TBD */
+#endif
+
+#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
+#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
+#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
+#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#if 0	/* No PCI on CATcenter */
+#define PCI_HOST_ADAPTER 0		/* configure as pci adapter	*/
+#define PCI_HOST_FORCE	1		/* configure as pci host	*/
+#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
+
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_HOST PCI_HOST_FORCE	 /* select pci host function	 */
+#undef	CONFIG_PCI_PNP			/* do pci plug-and-play		*/
+					/* resource configuration	*/
+
+#define CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
+
+#define CFG_PCI_SUBSYS_VENDORID 0x12FE	/* PCI Vendor ID: esd gmbh	*/
+#define CFG_PCI_SUBSYS_DEVICEID 0x0405	/* PCI Device ID: CPCI-405	*/
+#define CFG_PCI_CLASSCODE	0x0b20	/* PCI Class Code: Processor/PPC*/
+#define CFG_PCI_PTM1LA	0x00000000	/* point to sdram		*/
+#define CFG_PCI_PTM1MS	0xfc000001	/* 64MB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000	/* Host: use this pci address	*/
+#define CFG_PCI_PTM2LA	0xffc00000	/* point to flash		*/
+#define CFG_PCI_PTM2MS	0xffc00001	/* 4MB, enable			*/
+#define CFG_PCI_PTM2PCI 0x04000000	/* Host: use this pci address	*/
+#endif	/* No PCI */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xFFFC0000
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
+#define CFG_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
+#define CFG_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0		0x0000	/* 0 is standard			*/
+#define CFG_FLASH_READ1		0x0001	/* 1 is standard			*/
+#define CFG_FLASH_READ2		0x0002	/* 2 is standard			*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#if 0 /* test-only */
+#define CFG_JFFS2_FIRST_BANK	0	/* use for JFFS2			*/
+#define CFG_JFFS2_NUM_BANKS	1	/* ! second bank contains U-Boot	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * Environment Variable setup
+ */
+#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
+#define CFG_ENV_ADDR		0xFFFF8000	/* environment starts at the first small sector */
+#define CFG_ENV_SECT_SIZE	0x2000	/* 8196 bytes may be used for env vars*/
+#define CFG_ENV_ADDR_REDUND	0xFFFFA000
+#define CFG_ENV_SIZE_REDUND	0x2000
+
+#define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
+#define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (CAT24WC16) for environment
+ */
+#define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
+#define CFG_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
+/* mask of address bits that overflow into the "EEPROM chip address"	*/
+/*#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07*/
+#define CFG_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+					/* 16 byte page write mode using*/
+					/* last 4 bits of the address	*/
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		16384	/* For IBM 405 CPUs, older 405 ppc's	*/
+					/* have only 8kB, 16kB is save here	*/
+#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization			*/
+#define CFG_EBC_PB0AP		0x92015480
+#define CFG_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (External SRAM) initialization					*/
+/* Since this must replace NOR Flash, we use the same settings for CS0		*/
+#define CFG_EBC_PB1AP		0x92015480
+#define CFG_EBC_PB1CR		0xFF85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit	*/
+
+/* Memory Bank 2 (Flash Bank 1, NAND-FLASH) initialization			*/
+#define CFG_EBC_PB2AP		0x92015480
+#define CFG_EBC_PB2CR		0xFF458000  /* BAS=0xFF4,BS=4MB,BU=R/W,BW=8bit	*/
+
+/* Memory Bank 3 (Flash Bank 2, NAND-FLASH) initialization			*/
+#define CFG_EBC_PB3AP		0x92015480
+#define CFG_EBC_PB3CR		0xFF058000  /* BAS=0xFF0,BS=4MB,BU=R/W,BW=8bit	*/
+
+
+#if 0 /* Roese */
+/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization			*/
+#define CFG_EBC_PB1AP		0x92015480
+#define CFG_EBC_PB1CR		0xFF858000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit	*/
+
+/* Memory Bank 2 (CAN0, 1) initialization					*/
+#define CFG_EBC_PB2AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB2CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+
+/* Memory Bank 3 (CompactFlash IDE) initialization				*/
+#define CFG_EBC_PB3AP		0x010053C0  /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
+#define CFG_EBC_PB3CR		0xF011A000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 4 (NVRAM/RTC) initialization					*/
+#define CFG_EBC_PB4AP		0x01005280  /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1	*/
+#define CFG_EBC_PB4CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * FPGA stuff
+ */
+/* FPGA internal regs */
+#define CFG_FPGA_MODE		0x00
+#define CFG_FPGA_STATUS		0x02
+#define CFG_FPGA_TS		0x04
+#define CFG_FPGA_TS_LOW		0x06
+#define CFG_FPGA_TS_CAP0	0x10
+#define CFG_FPGA_TS_CAP0_LOW	0x12
+#define CFG_FPGA_TS_CAP1	0x14
+#define CFG_FPGA_TS_CAP1_LOW	0x16
+#define CFG_FPGA_TS_CAP2	0x18
+#define CFG_FPGA_TS_CAP2_LOW	0x1a
+#define CFG_FPGA_TS_CAP3	0x1c
+#define CFG_FPGA_TS_CAP3_LOW	0x1e
+
+/* FPGA Mode Reg */
+#define CFG_FPGA_MODE_CF_RESET	0x0001
+#define CFG_FPGA_MODE_TS_IRQ_ENABLE 0x0100
+#define CFG_FPGA_MODE_TS_IRQ_CLEAR  0x1000
+#define CFG_FPGA_MODE_TS_CLEAR	0x2000
+
+/* FPGA Status Reg */
+#define CFG_FPGA_STATUS_DIP0	0x0001
+#define CFG_FPGA_STATUS_DIP1	0x0002
+#define CFG_FPGA_STATUS_DIP2	0x0004
+#define CFG_FPGA_STATUS_FLASH	0x0008
+#define CFG_FPGA_STATUS_TS_IRQ	0x1000
+
+#define CFG_FPGA_SPARTAN2	1		/* using Xilinx Spartan 2 now	*/
+#define CFG_FPGA_MAX_SIZE	128*1024	/* 128kByte is enough for XC2S50E*/
+
+/* FPGA program pin configuration */
+#define CFG_FPGA_PRG		0x04000000	/* FPGA program pin (ppc output) */
+#define CFG_FPGA_CLK		0x02000000	/* FPGA clk pin (ppc output)	*/
+#define CFG_FPGA_DATA		0x01000000	/* FPGA data pin (ppc output)	*/
+#define CFG_FPGA_INIT		0x00010000	/* FPGA init pin (ppc input)	*/
+#define CFG_FPGA_DONE		0x00008000	/* FPGA done pin (ppc input)	*/
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM	  1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR	0xF8000000
+#define CFG_OCM_DATA_SIZE	0x1000
+#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of SDRAM		*/
+#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+
+#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * GPIO0[0]	- External Bus Controller BLAST output
+ * GPIO0[1-9]	- Instruction trace outputs -> GPIO
+ * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
+ * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs -> GPIO
+ * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[24-27] - UART0 control signal inputs/outputs
+ * GPIO0[28-29] - UART1 data signal input/output
+ * GPIO0[30]	- EMAC0 input
+ * GPIO0[31]	- EMAC1 reject packet as output
+ */
+#define CFG_GPIO0_OSRH		0x40000550
+#define CFG_GPIO0_OSRL		0x00000110
+#define CFG_GPIO0_ISR1H		0x00000000
+/*#define CFG_GPIO0_ISR1L	0x15555445*/
+#define CFG_GPIO0_ISR1L		0x15555444
+#define CFG_GPIO0_TSRH		0x00000000
+#define CFG_GPIO0_TSRL		0x00000000
+#define CFG_GPIO0_TCR		0xF7FF8014
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+
+#define CONFIG_NO_SERIAL_EEPROM
+
+/*--------------------------------------------------------------------*/
+
+#ifdef CONFIG_NO_SERIAL_EEPROM
+
+/*
+!-----------------------------------------------------------------------
+! Defines for entry options.
+! Note: Because the 405EP SDRAM controller does not support ECC, ECC DIMMs that
+!	are plugged in the board will be utilized as non-ECC DIMMs.
+!-----------------------------------------------------------------------
+*/
+#undef		AUTO_MEMORY_CONFIG
+#define		DIMM_READ_ADDR 0xAB
+#define		DIMM_WRITE_ADDR 0xAA
+
+
+#define CPC0_PLLMR0  (CNTRL_DCR_BASE+0x0)  /* PLL mode 0 register		*/
+#define CPC0_BOOT    (CNTRL_DCR_BASE+0x1)  /* Chip Clock Status register	*/
+#define CPC0_CR1     (CNTRL_DCR_BASE+0x2)  /* Chip Control 1 register		*/
+#define CPC0_EPRCSR  (CNTRL_DCR_BASE+0x3)  /* EMAC PHY Rcv Clk Src register	*/
+#define CPC0_PLLMR1  (CNTRL_DCR_BASE+0x4)  /* PLL mode 1 register		*/
+#define CPC0_UCR     (CNTRL_DCR_BASE+0x5)  /* UART Control register		*/
+#define CPC0_SRR     (CNTRL_DCR_BASE+0x6)  /* Soft Reset register		*/
+#define CPC0_JTAGID  (CNTRL_DCR_BASE+0x7)  /* JTAG ID register			*/
+#define CPC0_SPARE   (CNTRL_DCR_BASE+0x8)  /* Spare DCR				*/
+#define CPC0_PCI     (CNTRL_DCR_BASE+0x9)  /* PCI Control register		*/
+
+/* Defines for CPC0_PLLMR1 Register fields */
+#define PLL_ACTIVE		0x80000000
+#define CPC0_PLLMR1_SSCS	0x80000000
+#define PLL_RESET		0x40000000
+#define CPC0_PLLMR1_PLLR	0x40000000
+    /* Feedback multiplier */
+#define PLL_FBKDIV		0x00F00000
+#define CPC0_PLLMR1_FBDV	0x00F00000
+#define PLL_FBKDIV_16		0x00000000
+#define PLL_FBKDIV_1		0x00100000
+#define PLL_FBKDIV_2		0x00200000
+#define PLL_FBKDIV_3		0x00300000
+#define PLL_FBKDIV_4		0x00400000
+#define PLL_FBKDIV_5		0x00500000
+#define PLL_FBKDIV_6		0x00600000
+#define PLL_FBKDIV_7		0x00700000
+#define PLL_FBKDIV_8		0x00800000
+#define PLL_FBKDIV_9		0x00900000
+#define PLL_FBKDIV_10		0x00A00000
+#define PLL_FBKDIV_11		0x00B00000
+#define PLL_FBKDIV_12		0x00C00000
+#define PLL_FBKDIV_13		0x00D00000
+#define PLL_FBKDIV_14		0x00E00000
+#define PLL_FBKDIV_15		0x00F00000
+    /* Forward A divisor */
+#define PLL_FWDDIVA		0x00070000
+#define CPC0_PLLMR1_FWDVA	0x00070000
+#define PLL_FWDDIVA_8		0x00000000
+#define PLL_FWDDIVA_7		0x00010000
+#define PLL_FWDDIVA_6		0x00020000
+#define PLL_FWDDIVA_5		0x00030000
+#define PLL_FWDDIVA_4		0x00040000
+#define PLL_FWDDIVA_3		0x00050000
+#define PLL_FWDDIVA_2		0x00060000
+#define PLL_FWDDIVA_1		0x00070000
+    /* Forward B divisor */
+#define PLL_FWDDIVB		0x00007000
+#define CPC0_PLLMR1_FWDVB	0x00007000
+#define PLL_FWDDIVB_8		0x00000000
+#define PLL_FWDDIVB_7		0x00001000
+#define PLL_FWDDIVB_6		0x00002000
+#define PLL_FWDDIVB_5		0x00003000
+#define PLL_FWDDIVB_4		0x00004000
+#define PLL_FWDDIVB_3		0x00005000
+#define PLL_FWDDIVB_2		0x00006000
+#define PLL_FWDDIVB_1		0x00007000
+    /* PLL tune bits */
+#define PLL_TUNE_MASK		0x000003FF
+#define PLL_TUNE_2_M_3		0x00000133	/*  2 <= M <= 3			*/
+#define PLL_TUNE_4_M_6		0x00000134	/*  3 <	 M <= 6			*/
+#define PLL_TUNE_7_M_10		0x00000138	/*  6 <	 M <= 10		*/
+#define PLL_TUNE_11_M_14	0x0000013C	/* 10 <	 M <= 14		*/
+#define PLL_TUNE_15_M_40	0x0000023E	/* 14 <	 M <= 40		*/
+#define PLL_TUNE_VCO_LOW	0x00000000	/* 500MHz <= VCO <=  800MHz	*/
+#define PLL_TUNE_VCO_HI		0x00000080	/* 800MHz <  VCO <= 1000MHz	*/
+
+/* Defines for CPC0_PLLMR0 Register fields */
+    /* CPU divisor */
+#define PLL_CPUDIV		0x00300000
+#define CPC0_PLLMR0_CCDV	0x00300000
+#define PLL_CPUDIV_1		0x00000000
+#define PLL_CPUDIV_2		0x00100000
+#define PLL_CPUDIV_3		0x00200000
+#define PLL_CPUDIV_4		0x00300000
+    /* PLB divisor */
+#define PLL_PLBDIV		0x00030000
+#define CPC0_PLLMR0_CBDV	0x00030000
+#define PLL_PLBDIV_1		0x00000000
+#define PLL_PLBDIV_2		0x00010000
+#define PLL_PLBDIV_3		0x00020000
+#define PLL_PLBDIV_4		0x00030000
+    /* OPB divisor */
+#define PLL_OPBDIV		0x00003000
+#define CPC0_PLLMR0_OPDV	0x00003000
+#define PLL_OPBDIV_1		0x00000000
+#define PLL_OPBDIV_2		0x00001000
+#define PLL_OPBDIV_3		0x00002000
+#define PLL_OPBDIV_4		0x00003000
+    /* EBC divisor */
+#define PLL_EXTBUSDIV		0x00000300
+#define CPC0_PLLMR0_EPDV	0x00000300
+#define PLL_EXTBUSDIV_2		0x00000000
+#define PLL_EXTBUSDIV_3		0x00000100
+#define PLL_EXTBUSDIV_4		0x00000200
+#define PLL_EXTBUSDIV_5		0x00000300
+    /* MAL divisor */
+#define PLL_MALDIV		0x00000030
+#define CPC0_PLLMR0_MPDV	0x00000030
+#define PLL_MALDIV_1		0x00000000
+#define PLL_MALDIV_2		0x00000010
+#define PLL_MALDIV_3		0x00000020
+#define PLL_MALDIV_4		0x00000030
+    /* PCI divisor */
+#define PLL_PCIDIV		0x00000003
+#define CPC0_PLLMR0_PPFD	0x00000003
+#define PLL_PCIDIV_1		0x00000000
+#define PLL_PCIDIV_2		0x00000001
+#define PLL_PCIDIV_3		0x00000002
+#define PLL_PCIDIV_4		0x00000003
+
+/* CPU - PLB/SDRAM - EBC - OPB - PCI (assuming a 33.3MHz input clock to the 405EP) */
+#define PLLMR0_133_133_33_66_33	 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
+				  PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
+				  PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_133_133_33_66_33	 (PLL_FBKDIV_4	|  \
+				  PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \
+				  PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_200_100_50_33	 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
+				  PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
+				  PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_200_100_50_33	 (PLL_FBKDIV_6	| \
+				  PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \
+				  PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_266_133_33_66_33	 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
+				  PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
+				  PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_266_133_33_66_33	 (PLL_FBKDIV_8	| \
+				  PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+				  PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_333_111_37_55_55	 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+				  PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
+				  PLL_MALDIV_1 | PLL_PCIDIV_2)
+#define PLLMR1_333_111_37_55_55	 (PLL_FBKDIV_10 | \
+				  PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+				  PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+
+#if   (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI)
+/* Model HI */
+#define PLLMR0_DEFAULT		PLLMR0_333_111_37_55_55
+#define PLLMR1_DEFAULT		PLLMR1_333_111_37_55_55
+/* Model ME */
+#elif (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME)
+#define PLLMR0_DEFAULT		PLLMR0_266_133_33_66_33
+#define PLLMR1_DEFAULT		PLLMR1_266_133_33_66_33
+#else
+/* Model BA (default) */
+#define PLLMR0_DEFAULT		PLLMR0_133_133_33_66_33
+#define PLLMR1_DEFAULT		PLLMR1_133_133_33_66_33
+#endif
+
+#endif /* CONFIG_NO_SERIAL_EEPROM */
+
+#define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
+#define CONFIG_JFFS2_NAND_DEV 0			/* nand device jffs2 lives on */
+#define CONFIG_JFFS2_NAND_OFF 0			/* start of jffs2 partition */
+#define CONFIG_JFFS2_NAND_SIZE 2*1024*1024	/* size of jffs2 partition */
+#define NAND_CACHE_PAGES 16			/* size of nand cache in 512 bytes pages */
+
+#endif	/* __CONFIG_H */