Merge 'next' branch

Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 103 insertions, 103 deletions

diff --git a/include/configs/BMW.h b/include/configs/BMW.h
index d5a398d..24ffb00 100644
--- a/include/configs/BMW.h
+++ b/include/configs/BMW.h
@@ -52,18 +52,18 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz	*/
 
 #define CONFIG_BOOTCOMMAND	"bootm FF820000"	/* autoboot command	*/
 #define CONFIG_BOOTDELAY	5
 
-#define CFG_MAX_DOC_DEVICE      1 /* Only use Onboard TSOP-16MB device */
+#define CONFIG_SYS_MAX_DOC_DEVICE      1 /* Only use Onboard TSOP-16MB device */
 #define DOC_PASSIVE_PROBE       1
-#define CFG_DOC_SUPPORT_2000    1
-#define CFG_DOC_SUPPORT_MILLENNIUM 1
-#define CFG_DOC_SHORT_TIMEOUT    1
+#define CONFIG_SYS_DOC_SUPPORT_2000    1
+#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM 1
+#define CONFIG_SYS_DOC_SHORT_TIMEOUT    1
 
 
 /*
@@ -96,66 +96,66 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=>"	        /* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=>"	        /* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CFG_MAXARGS	8		/* Max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define CONFIG_SYS_MAXARGS	8		/* Max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
 
-#define CFG_FLASH_BASE0_PRELIM      0xFFF00000      /* FLASH bank on RCS#0 */
-#define CFG_FLASH_BASE1_PRELIM      0xFF800000      /* FLASH bank on RCS#1 */
-#define CFG_FLASH_BASE  CFG_MONITOR_BASE
-#define CFG_FLASH_BANKS		{ CFG_FLASH_BASE0_PRELIM , CFG_FLASH_BASE1_PRELIM }
+#define CONFIG_SYS_FLASH_BASE0_PRELIM      0xFFF00000      /* FLASH bank on RCS#0 */
+#define CONFIG_SYS_FLASH_BASE1_PRELIM      0xFF800000      /* FLASH bank on RCS#1 */
+#define CONFIG_SYS_FLASH_BASE  CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_FLASH_BANKS		{ CONFIG_SYS_FLASH_BASE0_PRELIM , CONFIG_SYS_FLASH_BASE1_PRELIM }
 
 /* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
  * reset vector is actually located at FFB00100, but the 8245
  * takes care of us.
  */
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_EUMB_ADDR	    0xFC000000
+#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (2048 << 10) /* Reserve 2MB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (2048 << 10) /* Reserve 2MB for malloc()	*/
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x04000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x04000000	/* 0 ... 32 MB in DRAM		*/
 
 	/* Maximum amount of RAM.
 	 */
-#define CFG_MAX_RAM_SIZE    0x04000000	/* 0 .. 64 MB of (S)DRAM */
+#define CONFIG_SYS_MAX_RAM_SIZE    0x04000000	/* 0 .. 64 MB of (S)DRAM */
 
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  */
-#define CFG_INIT_RAM_ADDR CFG_SDRAM_BASE + CFG_MONITOR_LEN
-#define CFG_INIT_RAM_END   0x2F00  /* End of used area in DPRAM  */
-#define CFG_GBL_DATA_SIZE  128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET  CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN
+#define CONFIG_SYS_INIT_RAM_END   0x2F00  /* End of used area in DPRAM  */
+#define CONFIG_SYS_GBL_DATA_SIZE  128  /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET  CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
  * Low Level Configuration Settings
@@ -165,43 +165,43 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ  33000000	/* external frequency to pll */
-#define CFG_HZ		     1000
+#define CONFIG_SYS_HZ		     1000
 
-#define CFG_ETH_DEV_FN	     0x7800
-#define CFG_ETH_IOBASE	     0x00104000
+#define CONFIG_SYS_ETH_DEV_FN	     0x7800
+#define CONFIG_SYS_ETH_IOBASE	     0x00104000
 
 	/* Bit-field values for MCCR1.
 	 */
-#define CFG_ROMNAL	    0xf
-#define CFG_ROMFAL	    0x1f
-#define CFG_DBUS_SIZE       0x3
+#define CONFIG_SYS_ROMNAL	    0xf
+#define CONFIG_SYS_ROMFAL	    0x1f
+#define CONFIG_SYS_DBUS_SIZE       0x3
 
 	/* Bit-field values for MCCR2.
 	 */
-#define CFG_TSWAIT	    0x5		    /* Transaction Start Wait States timer */
-#define CFG_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
+#define CONFIG_SYS_TSWAIT	    0x5		    /* Transaction Start Wait States timer */
+#define CONFIG_SYS_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
 
 	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 	 */
-#define CFG_BSTOPRE	    0		/* FIXME: was 192 */
+#define CONFIG_SYS_BSTOPRE	    0		/* FIXME: was 192 */
 
 	/* Bit-field values for MCCR3.
 	 */
-#define CFG_REFREC	    2	    /* Refresh to activate interval */
+#define CONFIG_SYS_REFREC	    2	    /* Refresh to activate interval */
 
 	/* Bit-field values for MCCR4.
 	 */
-#define CFG_PRETOACT	    2	    /* Precharge to activate interval FIXME: was 2	*/
-#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval FIXME: was 5	*/
-#define CFG_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
-#define CFG_SDMODE_BURSTLEN 3	    /* SDMODE Burst length */
-#define CFG_ACTORW	    0xa		/* FIXME was 2 */
-#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_PRETOACT	    2	    /* Precharge to activate interval FIXME: was 2	*/
+#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval FIXME: was 5	*/
+#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
+#define CONFIG_SYS_SDMODE_BURSTLEN 3	    /* SDMODE Burst length */
+#define CONFIG_SYS_ACTORW	    0xa		/* FIXME was 2 */
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
 
-#define CFG_PGMAX           0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
+#define CONFIG_SYS_PGMAX           0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
 
-#define CFG_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
+#define CONFIG_SYS_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -210,32 +210,32 @@
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START	    0x3ff00000
-#define CFG_BANK1_END	    0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START	    0x3ff00000
-#define CFG_BANK2_END	    0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START	    0x3ff00000
-#define CFG_BANK3_END	    0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START	    0x3ff00000
-#define CFG_BANK4_END	    0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START	    0x3ff00000
-#define CFG_BANK5_END	    0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START	    0x3ff00000
-#define CFG_BANK6_END	    0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START	    0x3ff00000
-#define CFG_BANK7_END	    0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_ODCR	    0xff
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    0x3ff00000
+#define CONFIG_SYS_BANK1_END	    0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START	    0x3ff00000
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_ODCR	    0xff
 
 #define CONFIG_PCI              1 /* Include PCI support */
 #undef CONFIG_PCI_PNP
@@ -248,42 +248,42 @@
 #include "../board/bmw/bmw.h"
 
 /* BAT configuration */
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT1L  (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT1U  (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L  (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT1U  (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	0	/* Max number of flash banks	    */
-#define CFG_MAX_FLASH_SECT	64	/* Max number of sectors per  flash */
+#define CONFIG_SYS_MAX_FLASH_BANKS	0	/* Max number of flash banks	    */
+#define CONFIG_SYS_MAX_FLASH_SECT	64	/* Max number of sectors per  flash */
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
 
 /*
  * Warining: environment is not EMBEDDED in the U-Boot code.
@@ -291,7 +291,7 @@
  */
 #define CONFIG_ENV_IS_IN_NVRAM      1
 #define CONFIG_ENV_OVERWRITE     1
-#define CFG_NVRAM_ACCESS_ROUTINE 1
+#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1
 #define CONFIG_ENV_ADDR		0x7c004000 /* right at the start of NVRAM  */
 #define CONFIG_ENV_SIZE		0x1ff0	/* Size of the Environment - 8K	   */
 #define CONFIG_ENV_OFFSET		0	/* starting right at the beginning */
@@ -299,9 +299,9 @@
 /*
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value   */
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value   */
 #endif
 
 /*