Power: remove support for Freescale MPC8220

The Freescale MPC8220 Power Architecture processors have long reached
EOL; Freescale does not even list these any more on their web site.

Remove the code to avoid wasting maitaining efforts on dead stuff.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andy Fleming <afleming@gmail.com>

1 files changed, 0 insertions, 334 deletions

diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
deleted file mode 100644
index 39c29ec..0000000
--- a/include/configs/Alaska8220.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * (C) Copyright 2004
- * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC8220		1
-#define CONFIG_ALASKA8220	1	/* ... on Alaska board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_BAT_RW		1	/* Use common BAT rw code */
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
-   determine the CPU speed. */
-#define CONFIG_SYS_MPC8220_CLKIN	30000000/* ... running at 30MHz */
-#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
-
-/*
- * Serial console configuration
- */
-
-/* Define this for PSC console
-#define CONFIG_PSC_CONSOLE	1
-*/
-
-#define CONFIG_EXTUART_CONSOLE	1
-
-#ifdef CONFIG_EXTUART_CONSOLE
-#   define CONFIG_CONS_INDEX	1
-#   define CONFIG_SYS_NS16550_SERIAL
-#   define CONFIG_SYS_NS16550
-#   define CONFIG_SYS_NS16550_REG_SIZE 1
-#   define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CPLD_BASE + 0x1008)
-#   define CONFIG_SYS_NS16550_CLK	18432000
-#endif
-
-#define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_TIMESTAMP			/* Print image info with timestamp */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-
-#define CONFIG_MII
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY	5    /* autoboot after 5 seconds */
-#define CONFIG_BOOTARGS		"root=/dev/ram rw"
-#define CONFIG_ETHADDR		00:e0:0c:bc:e0:60
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		00:e0:0c:bc:e0:61
-#define CONFIG_IPADDR		192.162.1.2
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_SERVERIP		192.162.1.1
-#define CONFIG_GATEWAYIP	192.162.1.1
-#define CONFIG_HOSTNAME		Alaska
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_MODULE		1
-
-#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x52	/* 1011000xb */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
-/*
-#define CONFIG_ENV_IS_IN_EEPROM	1
-#define CONFIG_ENV_OFFSET		0
-#define CONFIG_ENV_SIZE		256
-*/
-
-/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD.
-   else undefined it will boot from Intel Strata flash */
-#define CONFIG_SYS_AMD_BOOT		1
-
-/*
- * Flexbus Chipselect configuration
- */
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_SYS_CS0_BASE		0xfff0
-#define CONFIG_SYS_CS0_MASK		0x00080000  /* 512 KB */
-#define CONFIG_SYS_CS0_CTRL		0x003f0d40
-
-#define CONFIG_SYS_CS1_BASE		0xfe00
-#define CONFIG_SYS_CS1_MASK		0x01000000  /* 16 MB */
-#define CONFIG_SYS_CS1_CTRL		0x003f1540
-#else
-#define CONFIG_SYS_CS0_BASE		0xff00
-#define CONFIG_SYS_CS0_MASK		0x01000000  /* 16 MB */
-#define CONFIG_SYS_CS0_CTRL		0x003f1540
-
-#define CONFIG_SYS_CS1_BASE		0xfe08
-#define CONFIG_SYS_CS1_MASK		0x00080000  /* 512 KB */
-#define CONFIG_SYS_CS1_CTRL		0x003f0d40
-#endif
-
-#define CONFIG_SYS_CS2_BASE		0xf100
-#define CONFIG_SYS_CS2_MASK		0x00040000
-#define CONFIG_SYS_CS2_CTRL		0x003f1140
-
-#define CONFIG_SYS_CS3_BASE		0xf200
-#define CONFIG_SYS_CS3_MASK		0x00040000
-#define CONFIG_SYS_CS3_CTRL		0x003f1100
-
-
-#define CONFIG_SYS_FLASH0_BASE		(CONFIG_SYS_CS0_BASE << 16)
-#define CONFIG_SYS_FLASH1_BASE		(CONFIG_SYS_CS1_BASE << 16)
-
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_SYS_AMD_BASE		CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_INTEL_BASE		CONFIG_SYS_FLASH1_BASE + 0xf00000
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_AMD_BASE
-#else
-#define CONFIG_SYS_INTEL_BASE		CONFIG_SYS_FLASH0_BASE + 0xf00000
-#define CONFIG_SYS_AMD_BASE		CONFIG_SYS_FLASH1_BASE
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_INTEL_BASE
-#endif
-
-#define CONFIG_SYS_CPLD_BASE		(CONFIG_SYS_CS2_BASE << 16)
-#define CONFIG_SYS_FPGA_BASE		(CONFIG_SYS_CS3_BASE << 16)
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	4	/* max num of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
-
-#define PHYS_AMD_SECT_SIZE	0x00010000 /*  64 KB sectors (x2) */
-#define PHYS_INTEL_SECT_SIZE	0x00020000 /* 128 KB sectors (x2) */
-
-#define CONFIG_SYS_FLASH_CHECKSUM
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE)
-#define CONFIG_ENV_SIZE		PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE	PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_ADDR		(CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE)
-#define CONFIG_ENV1_SIZE		PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_SECT_SIZE	PHYS_INTEL_SECT_SIZE
-#else
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE)
-#define CONFIG_ENV_SIZE		PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE	PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_ADDR		(CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE)
-#define CONFIG_ENV1_SIZE		PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_SECT_SIZE	PHYS_AMD_SECT_SIZE
-#endif
-
-#define CONFIG_ENV_OVERWRITE	1
-
-#if defined CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR		0xF0000000
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
-#define CONFIG_SYS_SRAM_BASE		(CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_SRAM_SIZE		0x8000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* Size of used area in DPRAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
-
-/* SDRAM configuration */
-#define CONFIG_SYS_SDRAM_TOTAL_BANKS		2
-#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR		0x51		/* 7bit */
-#define CONFIG_SYS_SDRAM_SPD_SIZE		0x40
-#define CONFIG_SYS_SDRAM_CAS_LATENCY		4		/* (CL=2)x2 */
-
-/* SDRAM drive strength register */
-#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_LOW  << SDRAMDS_SBE_SHIFT) | \
-					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
-					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBA_SHIFT) | \
-					 (DRIVE_STRENGTH_OFF  << SDRAMDS_SBS_SHIFT) | \
-					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBD_SHIFT))
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC8220_FEC	1
-#define CONFIG_FEC_10MBIT	1 /* Workaround for FEC 100Mbit problem */
-#define CONFIG_PHY_ADDR		0x18
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
-#define CONFIG_SYS_PROMPT		"=> "	    /* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	    /* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	    /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000  /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000    /* default load address */
-
-#define CONFIG_SYS_HZ			1000	    /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5   /* log base 2 of the above value */
-#endif
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL		HID0_ICE
-
-/*
- * JFFS2 partitions
- */
-
-/* No command line, one static partition */
-/*
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0x00400000
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-*/
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor0=alaska-0"
-#define MTDPARTS_DEFAULT	"mtdparts=alaska-0:4m(user)"
-*/
-
-#endif /* __CONFIG_H */