Merge git://www.denx.de/git/u-boot

Conflicts:

	CREDITS

1 files changed, 81 insertions, 0 deletions

diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
new file mode 100644
index 0000000..3d91e99
--- /dev/null
+++ b/include/config_cmd_all.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License Version 2. This file is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _CONFIG_CMD_ALL_H
+#define _CONFIG_CMD_ALL_H
+
+/*
+ * Alphabetical list of all possible commands.
+ */
+
+#define CONFIG_CMD_ASKENV	/* ask for env variable		*/
+#define CONFIG_CMD_AUTOSCRIPT	/* Autoscript Support		*/
+#define CONFIG_CMD_BDI	       	/* bdinfo			*/
+#define CONFIG_CMD_BEDBUG	/* Include BedBug Debugger	*/
+#define CONFIG_CMD_BMP		/* BMP support			*/
+#define CONFIG_CMD_BOOTD	/* bootd			*/
+#define CONFIG_CMD_BSP		/* Board Specific functions	*/
+#define CONFIG_CMD_CACHE	/* icache, dcache		*/
+#define CONFIG_CMD_CDP		/* Cisco Discovery Protocol 	*/
+#define CONFIG_CMD_CONSOLE	/* coninfo			*/
+#define CONFIG_CMD_DATE		/* support for RTC, date/time...*/
+#define CONFIG_CMD_DHCP		/* DHCP Support			*/
+#define CONFIG_CMD_DIAG		/* Diagnostics			*/
+#define CONFIG_CMD_DISPLAY	/* Display support		*/
+#define CONFIG_CMD_DOC		/* Disk-On-Chip Support		*/
+#define CONFIG_CMD_DTT		/* Digital Therm and Thermostat */
+#define CONFIG_CMD_ECHO		/* echo arguments		*/
+#define CONFIG_CMD_EEPROM	/* EEPROM read/write support	*/
+#define CONFIG_CMD_ELF		/* ELF (VxWorks) load/boot cmd	*/
+#define CONFIG_CMD_ENV		/* saveenv			*/
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_FDC		/* Floppy Disk Support		*/
+#define CONFIG_CMD_FDOS		/* Floppy DOS support		*/
+#define CONFIG_CMD_FLASH	/* flinfo, erase, protect	*/
+#define CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
+#define CONFIG_CMD_HWFLOW	/* RTS/CTS hw flow control	*/
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_IDE		/* IDE harddisk support		*/
+#define CONFIG_CMD_IMI		/* iminfo			*/
+#define CONFIG_CMD_IMLS		/* List all found images	*/
+#define CONFIG_CMD_IMMAP	/* IMMR dump support		*/
+#define CONFIG_CMD_IRQ		/* irqinfo			*/
+#define CONFIG_CMD_ITEST	/* Integer (and string) test	*/
+#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
+#define CONFIG_CMD_KGDB		/* kgdb				*/
+#define CONFIG_CMD_LOADB	/* loadb			*/
+#define CONFIG_CMD_LOADS	/* loads			*/
+#define CONFIG_CMD_MEMORY	/* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MFSL		/* FSL support for Microblaze	*/
+#define CONFIG_CMD_MII		/* MII support			*/
+#define CONFIG_CMD_MISC		/* Misc functions like sleep etc*/
+#define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_NAND		/* NAND support			*/
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#define CONFIG_CMD_NFS		/* NFS support			*/
+#define CONFIG_CMD_PCI		/* pciinfo			*/
+#define CONFIG_CMD_PCMCIA	/* PCMCIA support		*/
+#define CONFIG_CMD_PING		/* ping support			*/
+#define CONFIG_CMD_PORTIO	/* Port I/O			*/
+#define CONFIG_CMD_REGINFO	/* Register dump		*/
+#define CONFIG_CMD_REISER	/* Reiserfs support		*/
+#define CONFIG_CMD_RUN		/* run command in env variable	*/
+#define CONFIG_CMD_SAVES	/* save S record dump		*/
+#define CONFIG_CMD_SCSI		/* SCSI Support			*/
+#define CONFIG_CMD_SDRAM	/* SDRAM DIMM SPD info printout */
+#define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
+#define CONFIG_CMD_SNTP		/* SNTP support			*/
+#define CONFIG_CMD_SPI		/* SPI utility			*/
+#define CONFIG_CMD_UNIVERSE	/* Tundra Universe Support	*/
+#define CONFIG_CMD_USB		/* USB Support			*/
+#define CONFIG_CMD_VFD		/* VFD support (TRAB)		*/
+#define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
+#define CONFIG_CMD_MUX		/* AT91 MMC/SPI Mux Support     */
+
+#endif	/* _CONFIG_CMD_ALL_H */