summaryrefslogtreecommitdiff
path: root/include/commproc.h
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.m@jp.panasonic.com>2014-12-15 23:26:14 +0900
committerTom Rini <trini@ti.com>2015-01-05 12:08:52 -0500
commitacc2372db020b9415142e93a1c30f57c1d3aa5c2 (patch)
treebc2f4191b2ab6da5557fb61d15aca18ac954a54b /include/commproc.h
parentf017cd7f71fa98be4b3222a7c314ef000296c51a (diff)
downloadu-boot-imx-acc2372db020b9415142e93a1c30f57c1d3aa5c2.zip
u-boot-imx-acc2372db020b9415142e93a1c30f57c1d3aa5c2.tar.gz
u-boot-imx-acc2372db020b9415142e93a1c30f57c1d3aa5c2.tar.bz2
mpc8xx: remove lwmon board support
This board is still a non-generic board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'include/commproc.h')
-rw-r--r--include/commproc.h26
1 files changed, 0 insertions, 26 deletions
diff --git a/include/commproc.h b/include/commproc.h
index 8de0d15..509d6e4 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -543,32 +543,6 @@ typedef struct scc_enet {
#endif /* CONFIG_IVMS8, CONFIG_IVML24 */
-/*** LWMON **********************************************************/
-
-#if defined(CONFIG_LWMON)
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC2 use.
- */
-#define PROFF_ENET PROFF_SCC2
-#define CPM_CR_ENET CPM_CR_CH_SCC2
-#define SCC_ENET 1
-#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
-#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
-#define PA_ENET_RCLK ((ushort)0x0800) /* PA 4 */
-#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
-
-#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
-
-#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
-#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK4) to
- * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00003E00)
-#endif /* CONFIG_LWMON */
-
/*** KM8XX *********************************************************/
/* The KM8XX Service Module uses SCC3 for Ethernet */