Initial revision

1 files changed, 313 insertions, 0 deletions

diff --git a/include/cmd_bsp.h b/include/cmd_bsp.h
new file mode 100644
index 0000000..b39d50b
--- /dev/null
+++ b/include/cmd_bsp.h
@@ -0,0 +1,313 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CMD_BSP_H_
+#define _CMD_BSP_H_
+
+#include <common.h>
+#include <command.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+/* ----- LWMON -----------------------------------------------------------------
+ */
+#if defined(CONFIG_LWMON)
+
+#define	CMD_TBL_BSP	MK_CMD_TBL_ENTRY(					\
+	"pic",	3,	4,	1,	do_pic,					\
+	"pic     - read and write PIC registers\n",				\
+	"read  reg      - read PIC register `reg'\n"				\
+	"pic write reg val  - write value `val' to PIC register `reg'\n"	\
+),  MK_CMD_TBL_ENTRY(								\
+	"kbd",	3,	1,	1,	do_kbd,					\
+	"kbd     - read keyboard status\n",					\
+	NULL									\
+),  MK_CMD_TBL_ENTRY(								\
+	"lsb",	3,	2,	1,	do_lsb,					\
+	"lsb     - check and set LSB switch\n",					\
+	"on  - switch LSB on\n"							\
+	"lsb off - switch LSB off\n"						\
+	"lsb     - print current setting\n"					\
+),
+int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif	/* CONFIG_LWMON */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- PCU E -----------------------------------------------------------------
+ */
+#if defined(CONFIG_PCU_E)
+
+#define CMD_TBL_BSP	MK_CMD_TBL_ENTRY(					\
+	"puma",	4,	4,	1,	do_puma,				\
+	"puma    - access PUMA FPGA\n",						\
+	"status - print PUMA status\n"						\
+	"puma load addr len - load PUMA configuration data\n"			\
+),
+int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif	/* CONFIG_PCU_E */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- CCM/SCM ---------------------------------------------------------------
+ */
+#if defined(CONFIG_CCM) || defined(CONFIG_SCM)
+
+#define CMD_TBL_BSP	MK_CMD_TBL_ENTRY(					\
+	"fpga",	4,	4,	1,	do_fpga,				\
+	"fpga    - access FPGA(s)\n",						\
+	"fpga status [name] - print FPGA status\n"				\
+	"fpga reset  [name] - reset FPGA\n"					\
+	"fpga load [name] addr - load FPGA configuration data\n"		\
+),
+int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif	/* CONFIG_CCM, CONFIG_SCM */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- PIP405 -----------------------------------------------------------------
+ */
+#if defined(CONFIG_PIP405)
+
+#define	CMD_TBL_BSP MK_CMD_TBL_ENTRY(				\
+	"pip405",	4,	6,	1,	do_pip405,			\
+	"pip405  - PIP405 specific Cmds\n",					\
+	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"					\
+	"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"					\
+	"pip405 flash mps - updates U-Boot with image from MPS\n"					\
+),
+int do_pip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_PIP405 */
+/* ----------------------------------------------------------------------------*/
+/* ----- MIP405 -----------------------------------------------------------------
+ */
+#if defined(CONFIG_MIP405)
+
+#define	CMD_TBL_BSP MK_CMD_TBL_ENTRY(				\
+	"mip405",	4,	6,	1,	do_mip405,			\
+	"mip405  - MIP405 specific Cmds\n",					\
+	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"					\
+	"mip405 flash mps - updates U-Boot with image from MPS\n"					\
+),
+int do_mip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_MIP405 */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- DASA_SIM ---------------------------------------------------------------
+ */
+#if defined(CONFIG_DASA_SIM)
+
+#define	CMD_TBL_BSP MK_CMD_TBL_ENTRY(				                \
+	"pci9054",	7,	3,	1,	do_pci9054,			\
+	"pci9054 - PLX PCI9054 EEPROM access\n",				\
+	"pci9054 info - print EEPROM values\n"		                        \
+	"pci9054 update - updates EEPROM with default values\n"			\
+),
+int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif /* CONFIG_DASA_SIM */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- HYMOD -----------------------------------------------------------------
+ */
+#if defined(CONFIG_HYMOD)
+
+#define	CMD_TBL_BSP	MK_CMD_TBL_ENTRY(				\
+	"fpga",	4,	6,	1,	do_fpga,			\
+	"fpga    - FPGA sub-system\n",					\
+	"load [type] addr size\n"					\
+	"  - write the configuration data at memory address `addr',\n"	\
+	"    size `size' bytes, into the FPGA of type `type' (either\n"	\
+	"    `main' or `mezz', default `main'). e.g.\n"			\
+	"        `fpga load 100000 7d8f'\n"				\
+	"    loads the main FPGA with config data at address 100000\n"	\
+	"    HEX, size 7d8f HEX (32143 DEC) bytes\n"			\
+	"fpga tftp file addr\n"						\
+	"  - transfers `file' from the tftp server into memory at\n"	\
+	"    address `addr', then writes the entire file contents\n"	\
+	"    into the main FPGA\n"					\
+	"fpga store addr\n"						\
+	"  - read configuration data from the main FPGA (the mezz\n"	\
+	"    FPGA is write-only), into address `addr'. There must be\n"	\
+	"    enough memory available at `addr' to hold all the config\n"\
+	"    data - the size of which is determined by VC:???\n"	\
+	"fpga info\n"							\
+	"  - print information about the Hymod FPGA, namely the\n"	\
+	"    memory addresses at which the four FPGA local bus\n"	\
+	"    address spaces appear in the physical address space\n"	\
+), MK_CMD_TBL_ENTRY(							\
+	"eeclear", 4,	1,	0,	do_eecl,			\
+	"eeclear - Clear the eeprom on a Hymod board \n",		\
+	"[type]\n"							\
+	"  - write zeroes into the EEPROM on the board of type `type'\n"\
+	"    (`type' is either `main' or `mezz' - default `main')\n"	\
+	"    Note: the EEPROM write enable jumper must be installed\n"	\
+),
+int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif	/* CONFIG_HYMOD */
+/* ----------------------------------------------------------------------------*/
+/* CRAY405 (L1) */
+#if defined (CONFIG_CRAYL1)
+#define	CMD_TBL_BSP MK_CMD_TBL_ENTRY(						\
+	"L1cmd",	5,	4,	1,	do_crayL1,			\
+	"L1cmd  - L1 update, setup, commands \n",				\
+	"L1cmd update - update flash images from host\n"			\
+	"L1cmd boot - nfs or ramboot L1\n"					\
+),
+int do_crayL1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+#endif /* CONFIG_CRAY405 */
+/* ----------------------------------------------------------------------------*/
+
+#if defined (CONFIG_EVB64260)
+/* ----- EVB64260 -------------------------------------------------------------*/
+#ifdef CONFIG_ZUMA_V2
+#define CMD_TBL_BSP  ZUMA_TBL_ENTRY
+
+#define ZUMA_TBL_ENTRY	MK_CMD_TBL_ENTRY(				\
+	"zinit",	 5,	 1,	 0,	 do_zuma_init_pbb,	\
+	"zinit   - init zuma pbb\n",					\
+	"\n"								\
+	"    - init zuma pbb\n"						\
+), MK_CMD_TBL_ENTRY(							\
+	"zdtest",	  6,	  3,	  1,	  do_zuma_test_dma,	\
+	"zdtest  - run dma test\n",					\
+	"[cmd [count]]\n"						\
+	"    - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" \
+), MK_CMD_TBL_ENTRY(							\
+	"zminit",	  5,	  1,	  0,	  do_zuma_init_mbox,	\
+	"zminit  - init zuma mbox\n",				\
+	"\n"								\
+	"    - init zuma mbox\n"					\
+),
+
+int do_zuma_init_pbb  (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_zuma_test_dma  (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+void zuma_init_pbb(void);
+int zuma_mbox_init(void);
+int zuma_test_dma(int cmd, int size);
+#else
+#define CMD_TBL_BSP
+#endif /* ZUMA_NTL */
+
+#endif /* CONFIG_EVB64260 */
+/* ----------------------------------------------------------------------------*/
+
+/* -----W7O--------------------------------------------------------------------*/
+#if defined(CONFIG_W7O)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY(			\
+	  "vpd",	3,	2,	1,	do_vpd, \
+	  "vpd     - Read Vital Product Data\n",	\
+	  "[dev_addr]\n"				\
+	  "        - Read VPD Data from default address, or device address 'dev_addr'.\n" \
+),
+
+extern int do_vpd (cmd_tbl_t *, int, int, char *[]);
+
+#endif	/* CONFIG_W7O */
+/* ----------------------------------------------------------------------------*/
+
+/* ---- PCIPPC2 / PCIPPC6 -----------------------------------------------------*/
+#if defined(CONFIG_PCIPPC2) || defined(CONFIG_PCIPPC6)
+#if defined(CONFIG_WATCHDOG)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY(			\
+	"wd",	3,	2,	1,	do_wd,					\
+	"wd      - check and set watchdog\n",					\
+	"on   - switch watchDog on\n"							\
+	"wd off  - switch watchdog off\n"						\
+	"wd      - print current status\n"					\
+),
+
+extern int do_wd (cmd_tbl_t *, int, int, char *[]);
+
+#else
+#define CMD_TBL_BSP
+#endif  /* CONFIG_WATCHDOG */
+
+#endif	/* CONFIG_PCIPPC2 , CONFIG_PCIPPC6 */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- PN62 -----------------------------------------------------------------*/
+#if defined(CONFIG_PN62)
+
+#define CMD_TBL_BSP MK_CMD_TBL_ENTRY(				\
+	"loadpci",	5,	2,	1,	do_loadpci, 	\
+	"loadpci - load binary file over PCI\n",		\
+	"[addr]\n"						\
+	"    - load binary file over PCI to address 'addr'\n"	\
+), MK_CMD_TBL_ENTRY( 	 	 	 	 	 	\
+	"led"    ,	3,	3,	1,	do_led, 	\
+	"led     - set LED 0..11 on the PN62 board\n",		\
+	"i fun\n"						\
+	"    - set 'i'th LED to function 'fun'\n"		\
+),
+
+extern int do_loadpci (cmd_tbl_t *, int, int, char *[]);
+extern int do_led (cmd_tbl_t *, int, int, char *[]);
+#endif /* CONFIG_PN62 */
+/* ----------------------------------------------------------------------------*/
+
+/* ----- TRAB ------------------------------------------------------------------
+ */
+#if defined(CONFIG_TRAB)
+
+#define	CMD_TBL_BSP	MK_CMD_TBL_ENTRY(					\
+	"kbd",	3,	1,	1,	do_kbd,					\
+	"kbd     - read keyboard status\n",					\
+	NULL									\
+),
+
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif	/* CONFIG_TRAB */
+/* ----------------------------------------------------------------------------*/
+
+#else
+#define CMD_TBL_BSP
+#endif	/* CFG_CMD_BSP */
+
+/* ----- R360MPI ---------------------------------------------------------------
+ */
+#if defined(CONFIG_R360MPI)
+
+#define	CMD_TBL_BSP	MK_CMD_TBL_ENTRY(					\
+	"kbd",	3,	1,	1,	do_kbd,					\
+	"kbd     - read keyboard status\n",					\
+	NULL									\
+),
+
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#endif	/* CONFIG_R360MPI */
+/* ----------------------------------------------------------------------------*/
+
+#endif	/* _CMD_BSP_H_ */