* Add support for 16 MB flash configuration of TRAB board

* Patch by Erwin Rol, 27 Feb 2003:
  Add support for RTEMS

* Add image information to README

* Fix dual PCMCIA slot support (when running with just one
  slot populated)

* Add VFD type detection to trab board

* extend drivers/cs8900.c driver to synchronize  ethaddr  environment
  variable with value in the EEPROM

* Start adding MIPS support files

1 files changed, 540 insertions, 0 deletions

diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
new file mode 100644
index 0000000..56fc3da
--- /dev/null
+++ b/include/asm-mips/mipsregs.h
@@ -0,0 +1,540 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Modified for further R[236]000 support by Paul M. Antoine, 1996.
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ */
+#ifndef _ASM_MIPSREGS_H
+#define _ASM_MIPSREGS_H
+
+#if 0
+#include <linux/linkage.h>
+#endif
+
+/*
+ * The following macros are especially useful for __asm__
+ * inline assembler.
+ */
+#ifndef __STR
+#define __STR(x) #x
+#endif
+#ifndef STR
+#define STR(x) __STR(x)
+#endif
+
+/*
+ * Coprocessor 0 register names
+ */
+#define CP0_INDEX $0
+#define CP0_RANDOM $1
+#define CP0_ENTRYLO0 $2
+#define CP0_ENTRYLO1 $3
+#define CP0_CONF $3
+#define CP0_CONTEXT $4
+#define CP0_PAGEMASK $5
+#define CP0_WIRED $6
+#define CP0_INFO $7
+#define CP0_BADVADDR $8
+#define CP0_COUNT $9
+#define CP0_ENTRYHI $10
+#define CP0_COMPARE $11
+#define CP0_STATUS $12
+#define CP0_CAUSE $13
+#define CP0_EPC $14
+#define CP0_PRID $15
+#define CP0_CONFIG $16
+#define CP0_LLADDR $17
+#define CP0_WATCHLO $18
+#define CP0_WATCHHI $19
+#define CP0_XCONTEXT $20
+#define CP0_FRAMEMASK $21
+#define CP0_DIAGNOSTIC $22
+#define CP0_PERFORMANCE $25
+#define CP0_ECC $26
+#define CP0_CACHEERR $27
+#define CP0_TAGLO $28
+#define CP0_TAGHI $29
+#define CP0_ERROREPC $30
+
+/*
+ * R4640/R4650 cp0 register names.  These registers are listed
+ * here only for completeness; without MMU these CPUs are not useable
+ * by Linux.  A future ELKS port might take make Linux run on them
+ * though ...
+ */
+#define CP0_IBASE $0
+#define CP0_IBOUND $1
+#define CP0_DBASE $2
+#define CP0_DBOUND $3
+#define CP0_CALG $17
+#define CP0_IWATCH $18
+#define CP0_DWATCH $19
+
+/* 
+ * Coprocessor 0 Set 1 register names
+ */
+#define CP0_S1_DERRADDR0  $26
+#define CP0_S1_DERRADDR1  $27
+#define CP0_S1_INTCONTROL $20
+/*
+ * Coprocessor 1 (FPU) register names
+ */
+#define CP1_REVISION   $0
+#define CP1_STATUS     $31
+
+/*
+ * FPU Status Register Values
+ */
+/*
+ * Status Register Values
+ */
+
+#define FPU_CSR_FLUSH   0x01000000      /* flush denormalised results to 0 */
+#define FPU_CSR_COND    0x00800000      /* $fcc0 */
+#define FPU_CSR_COND0   0x00800000      /* $fcc0 */
+#define FPU_CSR_COND1   0x02000000      /* $fcc1 */
+#define FPU_CSR_COND2   0x04000000      /* $fcc2 */
+#define FPU_CSR_COND3   0x08000000      /* $fcc3 */
+#define FPU_CSR_COND4   0x10000000      /* $fcc4 */
+#define FPU_CSR_COND5   0x20000000      /* $fcc5 */
+#define FPU_CSR_COND6   0x40000000      /* $fcc6 */
+#define FPU_CSR_COND7   0x80000000      /* $fcc7 */
+
+/*
+ * X the exception cause indicator
+ * E the exception enable
+ * S the sticky/flag bit
+*/
+#define FPU_CSR_ALL_X 0x0003f000
+#define FPU_CSR_UNI_X   0x00020000
+#define FPU_CSR_INV_X   0x00010000
+#define FPU_CSR_DIV_X   0x00008000
+#define FPU_CSR_OVF_X   0x00004000
+#define FPU_CSR_UDF_X   0x00002000
+#define FPU_CSR_INE_X   0x00001000
+
+#define FPU_CSR_ALL_E   0x00000f80
+#define FPU_CSR_INV_E   0x00000800
+#define FPU_CSR_DIV_E   0x00000400
+#define FPU_CSR_OVF_E   0x00000200
+#define FPU_CSR_UDF_E   0x00000100
+#define FPU_CSR_INE_E   0x00000080
+
+#define FPU_CSR_ALL_S   0x0000007c
+#define FPU_CSR_INV_S   0x00000040
+#define FPU_CSR_DIV_S   0x00000020
+#define FPU_CSR_OVF_S   0x00000010
+#define FPU_CSR_UDF_S   0x00000008
+#define FPU_CSR_INE_S   0x00000004
+
+/* rounding mode */
+#define FPU_CSR_RN      0x0     /* nearest */
+#define FPU_CSR_RZ      0x1     /* towards zero */
+#define FPU_CSR_RU      0x2     /* towards +Infinity */
+#define FPU_CSR_RD      0x3     /* towards -Infinity */
+
+
+/*
+ * Values for PageMask register
+ */
+#include <linux/config.h>
+#ifdef CONFIG_CPU_VR41XX
+#define PM_1K   0x00000000
+#define PM_4K   0x00001800
+#define PM_16K  0x00007800
+#define PM_64K  0x0001f800
+#define PM_256K 0x0007f800
+#else
+#define PM_4K   0x00000000
+#define PM_16K  0x00006000
+#define PM_64K  0x0001e000
+#define PM_256K 0x0007e000
+#define PM_1M   0x001fe000
+#define PM_4M   0x007fe000
+#define PM_16M  0x01ffe000
+#endif
+
+/*
+ * Values used for computation of new tlb entries
+ */
+#define PL_4K   12
+#define PL_16K  14
+#define PL_64K  16
+#define PL_256K 18
+#define PL_1M   20
+#define PL_4M   22
+#define PL_16M  24
+
+/*
+ * Macros to access the system control coprocessor
+ */
+#define read_32bit_cp0_register(source)                         \
+({ int __res;                                                   \
+        __asm__ __volatile__(                                   \
+	".set\tpush\n\t"					\
+	".set\treorder\n\t"					\
+        "mfc0\t%0,"STR(source)"\n\t"                            \
+	".set\tpop"						\
+        : "=r" (__res));                                        \
+        __res;})
+
+#define read_32bit_cp0_set1_register(source)                    \
+({ int __res;                                                   \
+        __asm__ __volatile__(                                   \
+	".set\tpush\n\t"					\
+	".set\treorder\n\t"					\
+        "cfc0\t%0,"STR(source)"\n\t"                            \
+	".set\tpop"						\
+        : "=r" (__res));                                        \
+        __res;})
+
+/*
+ * For now use this only with interrupts disabled!
+ */
+#define read_64bit_cp0_register(source)                         \
+({ int __res;                                                   \
+        __asm__ __volatile__(                                   \
+        ".set\tmips3\n\t"                                       \
+        "dmfc0\t%0,"STR(source)"\n\t"                           \
+        ".set\tmips0"                                           \
+        : "=r" (__res));                                        \
+        __res;})
+
+#define write_32bit_cp0_register(register,value)                \
+        __asm__ __volatile__(                                   \
+        "mtc0\t%0,"STR(register)"\n\t"				\
+	"nop"							\
+        : : "r" (value));
+
+#define write_32bit_cp0_set1_register(register,value)           \
+        __asm__ __volatile__(                                   \
+        "ctc0\t%0,"STR(register)"\n\t"				\
+	"nop"							\
+        : : "r" (value));
+
+#define write_64bit_cp0_register(register,value)                \
+        __asm__ __volatile__(                                   \
+        ".set\tmips3\n\t"                                       \
+        "dmtc0\t%0,"STR(register)"\n\t"                         \
+        ".set\tmips0"                                           \
+        : : "r" (value))
+
+/* 
+ * This should be changed when we get a compiler that support the MIPS32 ISA. 
+ */
+#define read_mips32_cp0_config1()                               \
+({ int __res;                                                   \
+        __asm__ __volatile__(                                   \
+	".set\tnoreorder\n\t"                                   \
+	".set\tnoat\n\t"                                        \
+     	".word\t0x40018001\n\t"                                 \
+	"move\t%0,$1\n\t"                                       \
+	".set\tat\n\t"                                          \
+	".set\treorder"                                         \
+	:"=r" (__res));                                         \
+        __res;})
+
+/*
+ * R4x00 interrupt enable / cause bits
+ */
+#define IE_SW0          (1<< 8)
+#define IE_SW1          (1<< 9)
+#define IE_IRQ0         (1<<10)
+#define IE_IRQ1         (1<<11)
+#define IE_IRQ2         (1<<12)
+#define IE_IRQ3         (1<<13)
+#define IE_IRQ4         (1<<14)
+#define IE_IRQ5         (1<<15)
+
+/*
+ * R4x00 interrupt cause bits
+ */
+#define C_SW0           (1<< 8)
+#define C_SW1           (1<< 9)
+#define C_IRQ0          (1<<10)
+#define C_IRQ1          (1<<11)
+#define C_IRQ2          (1<<12)
+#define C_IRQ3          (1<<13)
+#define C_IRQ4          (1<<14)
+#define C_IRQ5          (1<<15)
+
+#ifndef _LANGUAGE_ASSEMBLY
+/*
+ * Manipulate the status register.
+ * Mostly used to access the interrupt bits.
+ */
+#define __BUILD_SET_CP0(name,register)                          \
+extern __inline__ unsigned int                                  \
+set_cp0_##name(unsigned int set)				\
+{                                                               \
+	unsigned int res;                                       \
+                                                                \
+	res = read_32bit_cp0_register(register);                \
+	res |= set;						\
+	write_32bit_cp0_register(register, res);        	\
+                                                                \
+	return res;                                             \
+}								\
+								\
+extern __inline__ unsigned int                                  \
+clear_cp0_##name(unsigned int clear)				\
+{                                                               \
+	unsigned int res;                                       \
+                                                                \
+	res = read_32bit_cp0_register(register);                \
+	res &= ~clear;						\
+	write_32bit_cp0_register(register, res);		\
+                                                                \
+	return res;                                             \
+}								\
+								\
+extern __inline__ unsigned int                                  \
+change_cp0_##name(unsigned int change, unsigned int new)	\
+{                                                               \
+	unsigned int res;                                       \
+                                                                \
+	res = read_32bit_cp0_register(register);                \
+	res &= ~change;                                         \
+	res |= (new & change);                                  \
+	if(change)                                              \
+		write_32bit_cp0_register(register, res);        \
+                                                                \
+	return res;                                             \
+}
+
+__BUILD_SET_CP0(status,CP0_STATUS)
+__BUILD_SET_CP0(cause,CP0_CAUSE)
+__BUILD_SET_CP0(config,CP0_CONFIG)
+
+#endif /* defined (_LANGUAGE_ASSEMBLY) */
+
+/*
+ * Bitfields in the R4xx0 cp0 status register
+ */
+#define ST0_IE			0x00000001
+#define ST0_EXL			0x00000002
+#define ST0_ERL			0x00000004
+#define ST0_KSU			0x00000018
+#  define KSU_USER		0x00000010
+#  define KSU_SUPERVISOR	0x00000008
+#  define KSU_KERNEL		0x00000000
+#define ST0_UX			0x00000020
+#define ST0_SX			0x00000040
+#define ST0_KX 			0x00000080
+#define ST0_DE			0x00010000
+#define ST0_CE			0x00020000
+
+/*
+ * Bitfields in the R[23]000 cp0 status register.
+ */
+#define ST0_IEC                 0x00000001
+#define ST0_KUC			0x00000002
+#define ST0_IEP			0x00000004
+#define ST0_KUP			0x00000008
+#define ST0_IEO			0x00000010
+#define ST0_KUO			0x00000020
+/* bits 6 & 7 are reserved on R[23]000 */
+#define ST0_ISC			0x00010000
+#define ST0_SWC			0x00020000
+#define ST0_CM			0x00080000
+
+/*
+ * Bits specific to the R4640/R4650
+ */
+#define ST0_UM                 (1   <<  4)
+#define ST0_IL                 (1   << 23)
+#define ST0_DL                 (1   << 24)
+
+/*
+ * Bitfields in the TX39 family CP0 Configuration Register 3
+ */
+#define TX39_CONF_ICS_SHIFT	19
+#define TX39_CONF_ICS_MASK	0x00380000
+#define TX39_CONF_ICS_1KB 	0x00000000
+#define TX39_CONF_ICS_2KB 	0x00080000
+#define TX39_CONF_ICS_4KB 	0x00100000
+#define TX39_CONF_ICS_8KB 	0x00180000
+#define TX39_CONF_ICS_16KB 	0x00200000
+
+#define TX39_CONF_DCS_SHIFT	16
+#define TX39_CONF_DCS_MASK	0x00070000
+#define TX39_CONF_DCS_1KB 	0x00000000
+#define TX39_CONF_DCS_2KB 	0x00010000
+#define TX39_CONF_DCS_4KB 	0x00020000
+#define TX39_CONF_DCS_8KB 	0x00030000
+#define TX39_CONF_DCS_16KB 	0x00040000
+
+#define TX39_CONF_CWFON 	0x00004000
+#define TX39_CONF_WBON  	0x00002000
+#define TX39_CONF_RF_SHIFT	10
+#define TX39_CONF_RF_MASK	0x00000c00
+#define TX39_CONF_DOZE		0x00000200
+#define TX39_CONF_HALT		0x00000100
+#define TX39_CONF_LOCK		0x00000080
+#define TX39_CONF_ICE		0x00000020
+#define TX39_CONF_DCE		0x00000010
+#define TX39_CONF_IRSIZE_SHIFT	2
+#define TX39_CONF_IRSIZE_MASK	0x0000000c
+#define TX39_CONF_DRSIZE_SHIFT	0
+#define TX39_CONF_DRSIZE_MASK	0x00000003
+
+/*
+ * Status register bits available in all MIPS CPUs.
+ */
+#define ST0_IM			0x0000ff00
+#define  STATUSB_IP0		8
+#define  STATUSF_IP0		(1   <<  8)
+#define  STATUSB_IP1		9
+#define  STATUSF_IP1		(1   <<  9)
+#define  STATUSB_IP2		10
+#define  STATUSF_IP2		(1   << 10)
+#define  STATUSB_IP3		11
+#define  STATUSF_IP3		(1   << 11)
+#define  STATUSB_IP4		12
+#define  STATUSF_IP4		(1   << 12)
+#define  STATUSB_IP5		13
+#define  STATUSF_IP5		(1   << 13)
+#define  STATUSB_IP6		14
+#define  STATUSF_IP6		(1   << 14)
+#define  STATUSB_IP7		15
+#define  STATUSF_IP7		(1   << 15)
+#define  STATUSB_IP8		0
+#define  STATUSF_IP8		(1   << 0)
+#define  STATUSB_IP9		1
+#define  STATUSF_IP9		(1   << 1)
+#define  STATUSB_IP10		2
+#define  STATUSF_IP10		(1   << 2)
+#define  STATUSB_IP11		3
+#define  STATUSF_IP11		(1   << 3)
+#define  STATUSB_IP12		4
+#define  STATUSF_IP12		(1   << 4)
+#define  STATUSB_IP13		5
+#define  STATUSF_IP13		(1   << 5)
+#define  STATUSB_IP14		6
+#define  STATUSF_IP14		(1   << 6)
+#define  STATUSB_IP15		7
+#define  STATUSF_IP15		(1   << 7)
+#define ST0_CH			0x00040000
+#define ST0_SR			0x00100000
+#define ST0_BEV			0x00400000
+#define ST0_RE			0x02000000
+#define ST0_FR			0x04000000
+#define ST0_CU			0xf0000000
+#define ST0_CU0			0x10000000
+#define ST0_CU1			0x20000000
+#define ST0_CU2			0x40000000
+#define ST0_CU3			0x80000000
+#define ST0_XX			0x80000000	/* MIPS IV naming */
+
+/*
+ * Bitfields and bit numbers in the coprocessor 0 cause register.
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define  CAUSEB_EXCCODE		2
+#define  CAUSEF_EXCCODE		(31  <<  2)
+#define  CAUSEB_IP		8
+#define  CAUSEF_IP		(255 <<  8)
+#define  CAUSEB_IP0		8
+#define  CAUSEF_IP0		(1   <<  8)
+#define  CAUSEB_IP1		9
+#define  CAUSEF_IP1		(1   <<  9)
+#define  CAUSEB_IP2		10
+#define  CAUSEF_IP2		(1   << 10)
+#define  CAUSEB_IP3		11
+#define  CAUSEF_IP3		(1   << 11)
+#define  CAUSEB_IP4		12
+#define  CAUSEF_IP4		(1   << 12)
+#define  CAUSEB_IP5		13
+#define  CAUSEF_IP5		(1   << 13)
+#define  CAUSEB_IP6		14
+#define  CAUSEF_IP6		(1   << 14)
+#define  CAUSEB_IP7		15
+#define  CAUSEF_IP7		(1   << 15)
+#define  CAUSEB_IV		23
+#define  CAUSEF_IV		(1   << 23)
+#define  CAUSEB_CE		28
+#define  CAUSEF_CE		(3   << 28)
+#define  CAUSEB_BD		31
+#define  CAUSEF_BD		(1   << 31)
+
+/*
+ * Bits in the coprozessor 0 config register.
+ */
+#define CONF_CM_CACHABLE_NO_WA		0
+#define CONF_CM_CACHABLE_WA		1
+#define CONF_CM_UNCACHED		2
+#define CONF_CM_CACHABLE_NONCOHERENT	3
+#define CONF_CM_CACHABLE_CE		4
+#define CONF_CM_CACHABLE_COW		5
+#define CONF_CM_CACHABLE_CUW		6
+#define CONF_CM_CACHABLE_ACCELERATED	7
+#define CONF_CM_CMASK			7
+#define CONF_DB				(1 <<  4)
+#define CONF_IB				(1 <<  5)
+#define CONF_SC				(1 << 17)
+#define CONF_AC                         (1 << 23)
+#define CONF_HALT                       (1 << 25)
+
+/*
+ * R10000 performance counter definitions.
+ *
+ * FIXME: The R10000 performance counter opens a nice way to implement CPU
+ *        time accounting with a precission of one cycle.  I don't have
+ *        R10000 silicon but just a manual, so ...
+ */
+
+/*
+ * Events counted by counter #0
+ */
+#define CE0_CYCLES			0
+#define CE0_INSN_ISSUED			1
+#define CE0_LPSC_ISSUED			2
+#define CE0_S_ISSUED			3
+#define CE0_SC_ISSUED			4
+#define CE0_SC_FAILED			5
+#define CE0_BRANCH_DECODED		6
+#define CE0_QW_WB_SECONDARY		7
+#define CE0_CORRECTED_ECC_ERRORS	8
+#define CE0_ICACHE_MISSES		9
+#define CE0_SCACHE_I_MISSES		10
+#define CE0_SCACHE_I_WAY_MISSPREDICTED	11
+#define CE0_EXT_INTERVENTIONS_REQ	12
+#define CE0_EXT_INVALIDATE_REQ		13
+#define CE0_VIRTUAL_COHERENCY_COND	14
+#define CE0_INSN_GRADUATED		15
+
+/*
+ * Events counted by counter #1
+ */
+#define CE1_CYCLES			0
+#define CE1_INSN_GRADUATED		1
+#define CE1_LPSC_GRADUATED		2
+#define CE1_S_GRADUATED			3
+#define CE1_SC_GRADUATED		4
+#define CE1_FP_INSN_GRADUATED		5
+#define CE1_QW_WB_PRIMARY		6
+#define CE1_TLB_REFILL			7
+#define CE1_BRANCH_MISSPREDICTED	8
+#define CE1_DCACHE_MISS			9
+#define CE1_SCACHE_D_MISSES		10
+#define CE1_SCACHE_D_WAY_MISSPREDICTED	11
+#define CE1_EXT_INTERVENTION_HITS	12
+#define CE1_EXT_INVALIDATE_REQ		13
+#define CE1_SP_HINT_TO_CEXCL_SC_BLOCKS	14
+#define CE1_SP_HINT_TO_SHARED_SC_BLOCKS	15
+
+/*
+ * These flags define in which priviledge mode the counters count events
+ */
+#define CEB_USER	8	/* Count events in user mode, EXL = ERL = 0 */
+#define CEB_SUPERVISOR	4	/* Count events in supvervisor mode EXL = ERL = 0 */
+#define CEB_KERNEL	2	/* Count events in kernel mode EXL = ERL = 0 */
+#define CEB_EXL		1	/* Count events with EXL = 1, ERL = 0 */
+
+#endif /* _ASM_MIPSREGS_H */