microblaze: Remove useless ancient headers

Signed-off-by: Michal Simek <monstr@monstr.eu>

1 files changed, 0 insertions, 256 deletions

diff --git a/include/asm-microblaze/arch-microblaze/xuartlite_l.h b/include/asm-microblaze/arch-microblaze/xuartlite_l.h
deleted file mode 100644
index b381a0d..0000000
--- a/include/asm-microblaze/arch-microblaze/xuartlite_l.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/*****************************************************************************
-*
-*	XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-*	AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-*	SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
-*	OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-*	APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-*	THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-*	AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-*	FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
-*	WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-*	IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-*	REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-*	INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-*	FOR A PARTICULAR PURPOSE.
-*
-*	(c) Copyright 2002 Xilinx Inc.
-*	All rights reserved.
-*
-*****************************************************************************/
-/****************************************************************************/
-/**
-*
-* @file xuartlite_l.h
-*
-* This header file contains identifiers and low-level driver functions (or
-* macros) that can be used to access the device.  High-level driver functions
-* are defined in xuartlite.h.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm  04/25/02 First release
-* </pre>
-*
-*****************************************************************************/
-
-#ifndef XUARTLITE_L_H /* prevent circular inclusions */
-#define XUARTLITE_L_H /* by using protection macros */
-
-/***************************** Include Files ********************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-
-/************************** Constant Definitions ****************************/
-
-/* UART Lite register offsets */
-
-#define XUL_RX_FIFO_OFFSET		0   /* receive FIFO, read only */
-#define XUL_TX_FIFO_OFFSET		4   /* transmit FIFO, write only */
-#define XUL_STATUS_REG_OFFSET		8   /* status register, read only */
-#define XUL_CONTROL_REG_OFFSET		12  /* control register, write only */
-
-/* control register bit positions */
-
-#define XUL_CR_ENABLE_INTR		0x10	/* enable interrupt */
-#define XUL_CR_FIFO_RX_RESET		0x02	/* reset receive FIFO */
-#define XUL_CR_FIFO_TX_RESET		0x01	/* reset transmit FIFO */
-
-/* status register bit positions */
-
-#define XUL_SR_PARITY_ERROR		0x80
-#define XUL_SR_FRAMING_ERROR		0x40
-#define XUL_SR_OVERRUN_ERROR		0x20
-#define XUL_SR_INTR_ENABLED		0x10	/* interrupt enabled */
-#define XUL_SR_TX_FIFO_FULL		0x08	/* transmit FIFO full */
-#define XUL_SR_TX_FIFO_EMPTY		0x04	/* transmit FIFO empty */
-#define XUL_SR_RX_FIFO_FULL		0x02	/* receive FIFO full */
-#define XUL_SR_RX_FIFO_VALID_DATA	0x01	/* data in receive FIFO */
-
-/* the following constant specifies the size of the FIFOs, the size of the
- * FIFOs includes the transmitter and receiver such that it is the total number
- * of bytes that the UART can buffer
- */
-#define XUL_FIFO_SIZE		    16
-
-/* Stop bits are fixed at 1. Baud, parity, and data bits are fixed on a
- * per instance basis
- */
-#define XUL_STOP_BITS		    1
-
-/* Parity definitions
- */
-#define XUL_PARITY_NONE		    0
-#define XUL_PARITY_ODD		    1
-#define XUL_PARITY_EVEN		    2
-
-/**************************** Type Definitions ******************************/
-
-/***************** Macros (Inline Functions) Definitions ********************/
-
-/*****************************************************************************
-*
-* Low-level driver macros and functions. The list below provides signatures
-* to help the user use the macros.
-*
-* void XUartLite_mSetControlReg(u32 BaseAddress, u32 Mask)
-* u32 XUartLite_mGetControlReg(u32 BaseAddress)
-* u32 XUartLite_mGetStatusReg(u32 BaseAddress)
-*
-* Xboolean XUartLite_mIsReceiveEmpty(u32 BaseAddress)
-* Xboolean XUartLite_mIsTransmitFull(u32 BaseAddress)
-* Xboolean XUartLite_mIsIntrEnabled(u32 BaseAddress)
-*
-* void XUartLite_mEnableIntr(u32 BaseAddress)
-* void XUartLite_mDisableIntr(u32 BaseAddress)
-*
-* void XUartLite_SendByte(u32 BaseAddress, u8 Data);
-* u8 XUartLite_RecvByte(u32 BaseAddress);
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*
-* Set the contents of the control register. Use the XUL_CR_* constants defined
-* above to create the bit-mask to be written to the register.
-*
-* @param    BaseAddress is the base address of the device
-* @param    Mask is the 32-bit value to write to the control register
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mSetControlReg(BaseAddress, Mask) \
-		    XIo_Out32((BaseAddress) + XUL_CONTROL_REG_OFFSET, (Mask))
-
-
-/****************************************************************************/
-/**
-*
-* Get the contents of the control register. Use the XUL_CR_* constants defined
-* above to interpret the bit-mask returned.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   A 32-bit value representing the contents of the control register.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mGetControlReg(BaseAddress) \
-		    XIo_In32((BaseAddress) + XUL_CONTROL_REG_OFFSET)
-
-
-/****************************************************************************/
-/**
-*
-* Get the contents of the status register. Use the XUL_SR_* constants defined
-* above to interpret the bit-mask returned.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   A 32-bit value representing the contents of the status register.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mGetStatusReg(BaseAddress) \
-		    XIo_In32((BaseAddress) + XUL_STATUS_REG_OFFSET)
-
-
-/****************************************************************************/
-/**
-*
-* Check to see if the receiver has data.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   XTRUE if the receiver is empty, XFALSE if there is data present.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mIsReceiveEmpty(BaseAddress) \
-	  (!(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_RX_FIFO_VALID_DATA))
-
-
-/****************************************************************************/
-/**
-*
-* Check to see if the transmitter is full.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   XTRUE if the transmitter is full, XFALSE otherwise.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mIsTransmitFull(BaseAddress) \
-		(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_TX_FIFO_FULL)
-
-
-/****************************************************************************/
-/**
-*
-* Check to see if the interrupt is enabled.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   XTRUE if the interrupt is enabled, XFALSE otherwise.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mIsIntrEnabled(BaseAddress) \
-		(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_INTR_ENABLED)
-
-
-/****************************************************************************/
-/**
-*
-* Enable the device interrupt. Preserve the contents of the control register.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mEnableIntr(BaseAddress) \
-	       XUartLite_mSetControlReg((BaseAddress), \
-		   XUartLite_mGetControlReg((BaseAddress)) | XUL_CR_ENABLE_INTR)
-
-
-/****************************************************************************/
-/**
-*
-* Disable the device interrupt. Preserve the contents of the control register.
-*
-* @param    BaseAddress is the	base address of the device
-*
-* @return   None.
-*
-* @note	    None.
-*
-*****************************************************************************/
-#define XUartLite_mDisableIntr(BaseAddress) \
-	      XUartLite_mSetControlReg((BaseAddress), \
-		  XUartLite_mGetControlReg((BaseAddress)) & ~XUL_CR_ENABLE_INTR)
-
-
-/************************** Function Prototypes *****************************/
-
-void XUartLite_SendByte(u32 BaseAddress, u8 Data);
-u8 XUartLite_RecvByte(u32 BaseAddress);
-
-
-#endif		  /* end of protection macro */