Blackfin: update anomaly lists

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 56 insertions, 7 deletions

diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 058d95c..7c5127e 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf527/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision A, May 30, 2007; ADSP-BF527 Blackfin Processor Anomaly List
+ *  - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -23,20 +23,66 @@
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
-/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
-#define ANOMALY_05000301 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
 #define ANOMALY_05000312 (1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
 #define ANOMALY_05000328 (1)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
 #define ANOMALY_05000337 (1)
-/* TWI Does Not Operate Correctly Under Certain Signal Termination Conditions */
+/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
+#define ANOMALY_05000341 (1)
+/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
 #define ANOMALY_05000342 (1)
-/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+/* USB Calibration Value Is Not Initialized */
+#define ANOMALY_05000346 (1)
+/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
 #define ANOMALY_05000347 (1)
+/* Security Features Are Not Functional */
+#define ANOMALY_05000348 (__SILICON_REVISION__ < 1)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (1)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000364 (__SILICON_REVISION__ > 0)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* New Feature: Higher Default CCLK Rate */
+#define ANOMALY_05000368 (1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
+/* Authentication Fails To Initiate */
+#define ANOMALY_05000376 (__SILICON_REVISION__ > 0)
+/* Data Read From L3 Memory by USB DMA May be Corrupted */
+#define ANOMALY_05000380 (1)
+/* USB Full-speed Mode not Fully Tested */
+#define ANOMALY_05000381 (1)
+/* New Feature: Boot from OTP Memory */
+#define ANOMALY_05000385 (1)
+/* New Feature: bfrom_SysControl() Routine */
+#define ANOMALY_05000386 (1)
+/* New Feature: Programmable Preboot Settings */
+#define ANOMALY_05000387 (1)
+/* Reset Vector Must Not Be in SDRAM Memory Space */
+#define ANOMALY_05000389 (1)
+/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (1)
+/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (1)
+/* New Feature: Log Buffer Functionality */
+#define ANOMALY_05000394 (1)
+/* New Feature: Hook Routine Functionality */
+#define ANOMALY_05000395 (1)
+/* New Feature: Header Indirect Bit */
+#define ANOMALY_05000396 (1)
+/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */
+#define ANOMALY_05000397 (1)
+/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */
+#define ANOMALY_05000398 (1)
+/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */
+#define ANOMALY_05000399 (1)
+/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
+#define ANOMALY_05000401 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -49,7 +95,10 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000363 (0)
 
 #endif