Add port for the lpc2292sodimm evaluation board from EmbeddedArtists

3 files changed, 249 insertions, 0 deletions

diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h
index 3056ca7..1e9cd41 100644
--- a/include/asm-arm/arch-arm720t/hardware.h
+++ b/include/asm-arm/arch-arm720t/hardware.h
@@ -36,6 +36,8 @@
 /* include armadillo specific hardware file if there was one */
 #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
 /* include IntegratorCP/CM720T specific hardware file if there was one */
+#elif defined(CONFIG_LPC2292)
+#include <asm-arm/arch-arm720t/lpc2292_registers.h>
 #else
 #error No hardware file defined for this configuration
 #endif
diff --git a/include/asm-arm/arch-arm720t/lpc2292_registers.h b/include/asm-arm/arch-arm720t/lpc2292_registers.h
new file mode 100644
index 0000000..5715f3e
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/lpc2292_registers.h
@@ -0,0 +1,225 @@
+#ifndef __LPC2292_REGISTERS_H
+#define __LPC2292_REGISTERS_H
+
+#include <config.h>
+
+/* Macros for reading/writing registers */
+#define PUT8(reg, value) (*(volatile unsigned char*)(reg) = (value))
+#define PUT16(reg, value) (*(volatile unsigned short*)(reg) = (value))
+#define PUT32(reg, value) (*(volatile unsigned int*)(reg) = (value))
+#define GET8(reg) (*(volatile unsigned char*)(reg))
+#define GET16(reg) (*(volatile unsigned short*)(reg))
+#define GET32(reg) (*(volatile unsigned int*)(reg))
+
+/* External Memory Controller */
+
+#define BCFG0 0xFFE00000	/* 32-bits */
+#define BCFG1 0xFFE00004	/* 32-bits */
+#define BCFG2 0xFFE00008	/* 32-bits */
+#define BCFG3 0xFFE0000c	/* 32-bits */
+
+/* System Control Block */
+
+#define EXTINT   0xE01FC140
+#define EXTWAKE  0xE01FC144
+#define EXTMODE  0xE01FC148
+#define EXTPOLAR 0xE01FC14C
+#define MEMMAP   0xE01FC040
+#define PLLCON   0xE01FC080
+#define PLLCFG   0xE01FC084
+#define PLLSTAT  0xE01FC088
+#define PLLFEED  0xE01FC08C
+#define PCON     0xE01FC0C0
+#define PCONP    0xE01FC0C4
+#define VPBDIV   0xE01FC100
+
+/* Memory Acceleration Module */
+
+#define MAMCR  0xE01FC000
+#define MAMTIM 0xE01FC004
+
+/* Vectored Interrupt Controller */
+
+#define VICIRQStatus    0xFFFFF000
+#define VICFIQStatus    0xFFFFF004
+#define VICRawIntr      0xFFFFF008
+#define VICIntSelect    0xFFFFF00C
+#define VICIntEnable    0xFFFFF010
+#define VICIntEnClr     0xFFFFF014
+#define VICSoftInt      0xFFFFF018
+#define VICSoftIntClear 0xFFFFF01C
+#define VICProtection   0xFFFFF020
+#define VICVectAddr     0xFFFFF030
+#define VICDefVectAddr  0xFFFFF034
+#define VICVectAddr0    0xFFFFF100
+#define VICVectAddr1    0xFFFFF104
+#define VICVectAddr2    0xFFFFF108
+#define VICVectAddr3    0xFFFFF10C
+#define VICVectAddr4    0xFFFFF110
+#define VICVectAddr5    0xFFFFF114
+#define VICVectAddr6    0xFFFFF118
+#define VICVectAddr7    0xFFFFF11C
+#define VICVectAddr8    0xFFFFF120
+#define VICVectAddr9    0xFFFFF124
+#define VICVectAddr10   0xFFFFF128
+#define VICVectAddr11   0xFFFFF12C
+#define VICVectAddr12   0xFFFFF130
+#define VICVectAddr13   0xFFFFF134
+#define VICVectAddr14   0xFFFFF138
+#define VICVectAddr15   0xFFFFF13C
+#define VICVectCntl0    0xFFFFF200
+#define VICVectCntl1	0xFFFFF204
+#define VICVectCntl2	0xFFFFF208
+#define VICVectCntl3	0xFFFFF20C
+#define VICVectCntl4	0xFFFFF210
+#define VICVectCntl5	0xFFFFF214
+#define VICVectCntl6	0xFFFFF218
+#define VICVectCntl7	0xFFFFF21C
+#define VICVectCntl8	0xFFFFF220
+#define VICVectCntl9	0xFFFFF224
+#define VICVectCntl10	0xFFFFF228
+#define VICVectCntl11	0xFFFFF22C
+#define VICVectCntl12	0xFFFFF230
+#define VICVectCntl13	0xFFFFF234
+#define VICVectCntl14	0xFFFFF238
+#define VICVectCntl15	0xFFFFF23C
+
+/* Pin connect block */
+
+#define PINSEL0 0xE002C000	/* 32 bits */
+#define PINSEL1 0xE002C004	/* 32 bits */
+#define PINSEL2 0xE002C014	/* 32 bits */
+
+/* GPIO */
+
+#define IO0PIN 0xE0028000
+#define IO0SET 0xE0028004
+#define IO0DIR 0xE0028008
+#define IO0CLR 0xE002800C
+#define IO1PIN 0xE0028010
+#define IO1SET 0xE0028014
+#define IO1DIR 0xE0028018
+#define IO1CLR 0xE002801C
+#define IO2PIN 0xE0028020
+#define IO2SET 0xE0028024
+#define IO2DIR 0xE0028028
+#define IO2CLR 0xE002802C
+#define IO3PIN 0xE0028030
+#define IO3SET 0xE0028034
+#define IO3DIR 0xE0028038
+#define IO3CLR 0xE002803C
+
+/* Uarts */
+
+#define U0RBR 0xE000C000
+#define U0THR 0xE000C000
+#define U0IER 0xE000C004
+#define U0IIR 0xE000C008
+#define U0FCR 0xE000C008
+#define U0LCR 0xE000C00C
+#define U0LSR 0xE000C014
+#define U0SCR 0xE000C01C
+#define U0DLL 0xE000C000
+#define U0DLM 0xE000C004
+
+#define U1RBR 0xE0010000
+#define U1THR 0xE0010000
+#define U1IER 0xE0010004
+#define U1IIR 0xE0010008
+#define U1FCR 0xE0010008
+#define U1LCR 0xE001000C
+#define U1MCR 0xE0010010
+#define U1LSR 0xE0010014
+#define U1MSR 0xE0010018
+#define U1SCR 0xE001001C
+#define U1DLL 0xE0010000
+#define U1DLM 0xE0010004
+
+/* I2C */
+
+#define I2CONSET 0xE001C000
+#define I2STAT   0xE001C004
+#define I2DAT    0xE001C008
+#define I2ADR    0xE001C00C
+#define I2SCLH   0xE001C010
+#define I2SCLL   0xE001C014
+#define I2CONCLR 0xE001C018
+
+/* SPI */
+
+#define S0SPCR  0xE0020000
+#define S0SPSR  0xE0020004
+#define S0SPDR  0xE0020008
+#define S0SPCCR 0xE002000C
+#define S0SPINT 0xE002001C
+
+#define S1SPCR  0xE0030000
+#define S1SPSR  0xE0030004
+#define S1SPDR  0xE0030008
+#define S1SPCCR 0xE003000C
+#define S1SPINT 0xE003001C
+
+/* CAN controller */
+
+/* skip for now */
+
+/* Timers */
+
+#define T0IR  0xE0004000
+#define T0TCR 0xE0004004
+#define T0TC  0xE0004008
+#define T0PR  0xE000400C
+#define T0PC  0xE0004010
+#define T0MCR 0xE0004014
+#define T0MR0 0xE0004018
+#define T0MR1 0xE000401C
+#define T0MR2 0xE0004020
+#define T0MR3 0xE0004024
+#define T0CCR 0xE0004028
+#define T0CR0 0xE000402C
+#define T0CR1 0xE0004030
+#define T0CR2 0xE0004034
+#define T0CR3 0xE0004038
+#define T0EMR 0xE000403C
+
+#define T1IR  0xE0008000
+#define T1TCR 0xE0008004
+#define T1TC  0xE0008008
+#define T1PR  0xE000800C
+#define T1PC  0xE0008010
+#define T1MCR 0xE0008014
+#define T1MR0 0xE0008018
+#define T1MR1 0xE000801C
+#define T1MR2 0xE0008020
+#define T1MR3 0xE0008024
+#define T1CCR 0xE0008028
+#define T1CR0 0xE000802C
+#define T1CR1 0xE0008030
+#define T1CR2 0xE0008034
+#define T1CR3 0xE0008038
+#define T1EMR 0xE000803C
+
+/* PWM */
+
+/* skip for now */
+
+/* A/D converter */
+
+/* skip for now */
+
+/* Real Time Clock */
+
+/* skip for now */
+
+/* Watchdog */
+
+#define WDMOD  0xE0000000
+#define WDTC   0xE0000004
+#define WDFEED 0xE0000008
+#define WDTV   0xE000000C
+
+/* EmbeddedICE LOGIC */
+
+/* skip for now */
+
+#endif
diff --git a/include/asm-arm/arch-arm720t/mmc.h b/include/asm-arm/arch-arm720t/mmc.h
new file mode 100644
index 0000000..e664a5f
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/mmc.h
@@ -0,0 +1,22 @@
+/*
+ * A dummy header file for use with the LPC2292 port to keep the
+ * compiler happy.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _MMC_ARM_TDM_H_
+#define _MMC_ARM_TDM_H_
+#endif /* _MMC_ARM_TDM_H_ */