Patch by Kyle Harris, 20 May 2003:

In preparation for an ixp port, rename cpu/xscale and arch-xscale
into cpu/pxa and arch-pxa.

1 files changed, 0 insertions, 153 deletions

diff --git a/include/asm-arm/arch-xscale/hardware.h b/include/asm-arm/arch-xscale/hardware.h
deleted file mode 100644
index b84ea48..0000000
--- a/include/asm-arm/arch-xscale/hardware.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/hardware.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *  
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Note: This file was taken from linux-2.4.19-rmk4-pxa1
- *
- * - 2003/01/20 implementation specifics activated
- *   Robert Schwebel <r.schwebel@pengutronix.de>
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <linux/config.h>
-#include <asm/mach-types.h>
-
-
-/*
- * These are statically mapped PCMCIA IO space for designs using it as a
- * generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc.
- * The actual PCMCIA code is mapping required IO region at run time.
- */
-#define PCMCIA_IO_0_BASE	0xf6000000
-#define PCMCIA_IO_1_BASE	0xf7000000
-
-
-/*
- * We requires absolute addresses.
- */
-#define PCIO_BASE		0
-
-/*
- * Workarounds for at least 2 errata so far require this.
- * The mapping is set in mach-pxa/generic.c.
- */
-#define UNCACHED_PHYS_0		0xff000000
-#define UNCACHED_ADDR		UNCACHED_PHYS_0
-
-/*
- * Intel PXA internal I/O mappings:
- *
- * 0x40000000 - 0x41ffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x44000000 - 0x45ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff
- */
-
-/* FIXME: Only this does work for u-boot... find out why... [RS] */
-#define UBOOT_REG_FIX 1
-
-#ifndef UBOOT_REG_FIX
-#ifndef __ASSEMBLY__
-
-#define io_p2v(x)	( ((x) | 0xbe000000) ^ (~((x) >> 1) & 0x06000000) )
-#define io_v2p( x )	( ((x) & 0x41ffffff) ^ ( ((x) & 0x06000000) << 1) )
-
-/*
- * This __REG() version gives the same results as the one above,  except
- * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers.  It's a shame that gcc
- * doesn't guess this by itself.
- */
-#include <asm/types.h>
-typedef struct { volatile u32 offset[4096]; } __regbase;
-# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
-# define __REG(x)	__REGP(io_p2v(x))
-#endif
-
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y)	\
-	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
-				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-#endif /* UBOOT_REG_FIX */
-	
-#ifdef UBOOT_REG_FIX
-# undef	io_p2v
-# undef __REG
-# ifndef __ASSEMBLY__
-#  define io_p2v(PhAdd)    (PhAdd)
-#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-#  define __REG2(x,y)	(*(volatile u32 *)((u32)&__REG(x) + (y)))	
-# else
-#  define __REG(x) (x)	
-#endif /* UBOOT_REG_FIX */
-
-#include "pxa-regs.h"
-
-#ifndef __ASSEMBLY__
-
-/*
- * GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * This must be called *before* the corresponding IRQ is registered.
- * Use this instead of directly setting GRER/GFER.
- */
-#define GPIO_FALLING_EDGE       1
-#define GPIO_RISING_EDGE        2
-#define GPIO_BOTH_EDGES         3
-extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask );
-
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern void set_GPIO_mode( int gpio_mode );
-
-/*
- * return current lclk frequency in units of 10kHz
- */
-extern unsigned int get_lclk_frequency_10khz(void);
-
-#endif
-
-
-/*
- * Implementation specifics
- */
-
-#ifdef CONFIG_ARCH_LUBBOCK
-#include "lubbock.h"
-#endif
-
-#ifdef CONFIG_ARCH_PXA_IDP
-#include "idp.h"
-#endif
-
-#ifdef CONFIG_ARCH_PXA_CERF
-#include "cerf.h"
-#endif
-
-#ifdef CONFIG_ARCH_CSB226
-#include "csb226.h"
-#endif
-
-#ifdef CONFIG_ARCH_INNOKOM
-#include "innokom.h"
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */