Merge branch 'master' of git://git.denx.de/u-boot-arm

1 files changed, 146 insertions, 0 deletions

diff --git a/include/asm-arm/arch-spear/spr_i2c.h b/include/asm-arm/arch-spear/spr_i2c.h
new file mode 100755
index 0000000..7521ebc
--- /dev/null
+++ b/include/asm-arm/arch-spear/spr_i2c.h
@@ -0,0 +1,146 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SPR_I2C_H_
+#define __SPR_I2C_H_
+
+struct i2c_regs {
+	u32 ic_con;
+	u32 ic_tar;
+	u32 ic_sar;
+	u32 ic_hs_maddr;
+	u32 ic_cmd_data;
+	u32 ic_ss_scl_hcnt;
+	u32 ic_ss_scl_lcnt;
+	u32 ic_fs_scl_hcnt;
+	u32 ic_fs_scl_lcnt;
+	u32 ic_hs_scl_hcnt;
+	u32 ic_hs_scl_lcnt;
+	u32 ic_intr_stat;
+	u32 ic_intr_mask;
+	u32 ic_raw_intr_stat;
+	u32 ic_rx_tl;
+	u32 ic_tx_tl;
+	u32 ic_clr_intr;
+	u32 ic_clr_rx_under;
+	u32 ic_clr_rx_over;
+	u32 ic_clr_tx_over;
+	u32 ic_clr_rd_req;
+	u32 ic_clr_tx_abrt;
+	u32 ic_clr_rx_done;
+	u32 ic_clr_activity;
+	u32 ic_clr_stop_det;
+	u32 ic_clr_start_det;
+	u32 ic_clr_gen_call;
+	u32 ic_enable;
+	u32 ic_status;
+	u32 ic_txflr;
+	u32 ix_rxflr;
+	u32 reserved_1;
+	u32 ic_tx_abrt_source;
+};
+
+#define IC_CLK			166
+#define NANO_TO_MICRO		1000
+
+/* High and low times in different speed modes (in ns) */
+#define MIN_SS_SCL_HIGHTIME	4000
+#define MIN_SS_SCL_LOWTIME	5000
+#define MIN_FS_SCL_HIGHTIME	800
+#define MIN_FS_SCL_LOWTIME	1700
+#define MIN_HS_SCL_HIGHTIME	60
+#define MIN_HS_SCL_LOWTIME	160
+
+/* Worst case timeout for 1 byte is kept as 2ms */
+#define I2C_BYTE_TO		(CONFIG_SYS_HZ/500)
+#define I2C_STOPDET_TO		(CONFIG_SYS_HZ/500)
+#define I2C_BYTE_TO_BB		(I2C_BYTE_TO * 16)
+
+/* i2c control register definitions */
+#define IC_CON_SD		0x0040
+#define IC_CON_RE		0x0020
+#define IC_CON_10BITADDRMASTER	0x0010
+#define IC_CON_10BITADDR_SLAVE	0x0008
+#define IC_CON_SPD_MSK		0x0006
+#define IC_CON_SPD_SS		0x0002
+#define IC_CON_SPD_FS		0x0004
+#define IC_CON_SPD_HS		0x0006
+#define IC_CON_MM		0x0001
+
+/* i2c target address register definitions */
+#define TAR_ADDR		0x0050
+
+/* i2c slave address register definitions */
+#define IC_SLAVE_ADDR		0x0002
+
+/* i2c data buffer and command register definitions */
+#define IC_CMD			0x0100
+
+/* i2c interrupt status register definitions */
+#define IC_GEN_CALL		0x0800
+#define IC_START_DET		0x0400
+#define IC_STOP_DET		0x0200
+#define IC_ACTIVITY		0x0100
+#define IC_RX_DONE		0x0080
+#define IC_TX_ABRT		0x0040
+#define IC_RD_REQ		0x0020
+#define IC_TX_EMPTY		0x0010
+#define IC_TX_OVER		0x0008
+#define IC_RX_FULL		0x0004
+#define IC_RX_OVER 		0x0002
+#define IC_RX_UNDER		0x0001
+
+/* fifo threshold register definitions */
+#define IC_TL0			0x00
+#define IC_TL1			0x01
+#define IC_TL2			0x02
+#define IC_TL3			0x03
+#define IC_TL4			0x04
+#define IC_TL5			0x05
+#define IC_TL6			0x06
+#define IC_TL7			0x07
+#define IC_RX_TL		IC_TL0
+#define IC_TX_TL		IC_TL0
+
+/* i2c enable register definitions */
+#define IC_ENABLE_0B		0x0001
+
+/* i2c status register  definitions */
+#define IC_STATUS_SA		0x0040
+#define IC_STATUS_MA		0x0020
+#define IC_STATUS_RFF		0x0010
+#define IC_STATUS_RFNE		0x0008
+#define IC_STATUS_TFE		0x0004
+#define IC_STATUS_TFNF		0x0002
+#define IC_STATUS_ACT		0x0001
+
+/* Speed Selection */
+#define IC_SPEED_MODE_STANDARD	1
+#define IC_SPEED_MODE_FAST	2
+#define IC_SPEED_MODE_MAX	3
+
+#define I2C_MAX_SPEED		3400000
+#define I2C_FAST_SPEED		400000
+#define I2C_STANDARD_SPEED	100000
+
+#endif /* __SPR_I2C_H_ */