ENGR00144424 MX6: enable uboot for ARM2(SABREAUTO) CPU board

Use 528M DDR script
Disable L2 cache because rom enable L2 cache when use plug-in
Fix usdhc pad settings
Remove mac address hardcode

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Terry Lv <r65388@freescale.com>
Signed-off-by: Anish Trivedi <anish@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>

1 files changed, 149 insertions, 0 deletions

diff --git a/include/asm-arm/arch-mx6/iomux-v3.h b/include/asm-arm/arch-mx6/iomux-v3.h
new file mode 100644
index 0000000..c6ef949
--- /dev/null
+++ b/include/asm-arm/arch-mx6/iomux-v3.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ *	build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ *   things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ *   (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ *   (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num>
+ *
+ * IOMUX/PAD Bit field definitions
+ *
+ * MUX_CTRL_OFS:	    0..11 (12)
+ * PAD_CTRL_OFS:	   12..23 (12)
+ * SEL_INPUT_OFS:	   24..35 (12)
+ * MUX_MODE + SION:	   36..40  (5)
+ * PAD_CTRL + NO_PAD_CTRL: 41..57 (17)
+ * SEL_INP:		   58..61  (4)
+ * reserved:		     63    (1)
+*/
+
+typedef u64 iomux_v3_cfg_t;
+
+#define MUX_CTRL_OFS_SHIFT	0
+#define MUX_CTRL_OFS_MASK	((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
+#define MUX_PAD_CTRL_OFS_SHIFT	12
+#define MUX_PAD_CTRL_OFS_MASK	((iomux_v3_cfg_t)0xfff << \
+	MUX_PAD_CTRL_OFS_SHIFT)
+#define MUX_SEL_INPUT_OFS_SHIFT	24
+#define MUX_SEL_INPUT_OFS_MASK	((iomux_v3_cfg_t)0xfff << \
+	MUX_SEL_INPUT_OFS_SHIFT)
+
+#define MUX_MODE_SHIFT		36
+#define MUX_MODE_MASK		((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
+#define MUX_PAD_CTRL_SHIFT	41
+#define MUX_PAD_CTRL_MASK	((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
+#define NO_PAD_CTRL		((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16))
+#define MUX_SEL_INPUT_SHIFT	58
+#define MUX_SEL_INPUT_MASK	((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
+
+#define MUX_PAD_CTRL(x)		((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \
+		_sel_input, _pad_ctrl)					\
+	(((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) |	\
+		((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) |	\
+		((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \
+		((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) |	\
+		((iomux_v3_cfg_t)(_sel_input_ofs) << \
+			MUX_SEL_INPUT_OFS_SHIFT) | \
+		((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
+
+/*
+ * Use to set PAD control
+ */
+
+#define PAD_CTL_HYS		(1 << 16)
+
+#define PAD_CTL_PUS_100K_DOWN	(0 << 14)
+#define PAD_CTL_PUS_47K_UP	(1 << 14)
+#define PAD_CTL_PUS_100K_UP	(2 << 14)
+#define PAD_CTL_PUS_22K_UP	(3 << 14)
+
+#define PAD_CTL_PUE		(1 << 13)
+#define PAD_CTL_PKE		(1 << 12)
+#define PAD_CTL_ODE		(1 << 11)
+
+#define PAD_CTL_SPEED_LOW	(1 << 6)
+#define PAD_CTL_SPEED_MED	(2 << 6)
+#define PAD_CTL_SPEED_HIGH	(3 << 6)
+
+#define PAD_CTL_DSE_DISABLE	(0 << 3)
+#define PAD_CTL_DSE_240ohm	(1 << 3)
+#define PAD_CTL_DSE_120ohm	(2 << 3)
+#define PAD_CTL_DSE_80ohm	(3 << 3)
+#define PAD_CTL_DSE_60ohm	(4 << 3)
+#define PAD_CTL_DSE_48ohm	(5 << 3)
+#define PAD_CTL_DSE_40ohm	(6 << 3)
+#define PAD_CTL_DSE_34ohm	(7 << 3)
+
+#define PAD_CTL_SRE_FAST	(1 << 0)
+#define PAD_CTL_SRE_SLOW	(0 << 0)
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA	(0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB	(1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC	(2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD	(3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE	(4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF	(5 << GPIO_PORT_SHIFT)
+
+/*
+ * setups a single pad in the iomuxer
+ */
+int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
+
+/*
+ * setups mutliple pads
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
+
+/*
+ * Initialise the iomux controller
+ */
+void mxc_iomux_v3_init(void *iomux_v3_base);
+
+#endif /* __MACH_IOMUX_V3_H__*/
+