ENGR00121832: Some code reconstructure for u-boot

1. Remove board specific code in mxc_i2c.c.
2. Remove board specific code in mxc_fec.c.
3. Move imx_spi_nor.h to include/asm-arm.

Signed-off-by: Terry Lv <r65388@freescale.com>

1 files changed, 0 insertions, 70 deletions

diff --git a/include/asm-arm/arch-mx53/imx_spi_nor.h b/include/asm-arm/arch-mx53/imx_spi_nor.h
deleted file mode 100644
index 9425d59..0000000
--- a/include/asm-arm/arch-mx53/imx_spi_nor.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _IMX_SPI_NOR_H_
-#define _IMX_SPI_NOR_H_
-
-#define READ        0x03    /* tx:1 byte cmd + 3 byte addr;rx:variable bytes */
-#define READ_HS     0x0B    /* tx:1 byte cmd + 3 byte addr + 1 byte dummy; */
-#define RDSR        0x05    /* read stat reg 1 byte tx cmd + 1 byte rx status */
-#define RDSR_BUSY       (1 << 0)    /* 1=write-in-progress (default 0) */
-#define RDSR_WEL        (1 << 1)    /* 1=write enable (default 0) */
-#define RDSR_BP0        (1 << 2)    /* block write prot level (default 1) */
-#define RDSR_BP1        (1 << 3)    /* block write prot level (default 1) */
-#define RDSR_BP2        (1 << 4)    /* block write prot level (default 1) */
-#define RDSR_BP3        (1 << 5)    /* block write prot level (default 1) */
-#define RDSR_AAI        (1 << 6)    /* 1=AAI prog mode; 0=byte prog (def 0) */
-#define RDSR_BPL        (1 << 7)    /* 1=BP3,BP2,BP1,BP0 RO; 0=R/W (def 0)  */
-#define WREN        0x06    /* write enable. 1 byte tx cmd */
-#define WRDI        0x04    /* write disable. 1 byte tx cmd */
-#define EWSR        0x50    /* Enable write status. 1 byte tx cmd */
-#define WRSR        0x01    /* Write stat reg. 1 byte tx cmd + 1 byte tx val */
-#define ERASE_4K    0x20    /* sector erase. 1 byte cmd + 3 byte addr */
-#define ERASE_32K   0x52    /* 32K block erase. 1 byte cmd + 3 byte addr */
-#define ERASE_64K   0xD8    /* 64K block erase. 1 byte cmd + 3 byte addr */
-#define ERASE_CHIP  0x60    /* whole chip erase */
-#define BYTE_PROG   0x02    /* all tx: 1 cmd + 3 addr + 1 data */
-#define AAI_PROG    0xAD    /* all tx: [1 cmd + 3 addr + 2 data] + RDSR */
-				/* + [1cmd + 2 data] + .. + [WRDI] + [RDSR] */
-#define JEDEC_ID    0x9F    /* read JEDEC ID. tx: 1 byte cmd; rx: 3 byte ID */
-
-/* Atmel SPI-NOR commands */
-#define WR_2_MEM_DIR	0x82
-#define BUF1_WR		0x84
-#define BUF2_WR		0x87
-#define BUF1_TO_MEM	0x83
-#define BUF2_TO_MEM	0x86
-#define STAT_READ	0xD7
-#define STAT_PG_SZ	(1 << 0)  /* 1=Page size is 512, 0=Page size is 528 */
-#define STAT_PROT	(1 << 1)  /* 1=sector protection enabled (default 0) */
-#define STAT_COMP	(1 << 6)
-#define STAT_BUSY	(1 << 7) /* 1=Device not busy */
-#define CONFIG_REG1	0x3D
-#define CONFIG_REG2	0x2A
-#define CONFIG_REG3	0x80
-#define CONFIG_REG4	0xA6
-
-#define SZ_64K      0x10000
-#define SZ_32K      0x8000
-#define SZ_4K       0x1000
-
-#endif /* _IMX_SPI_NOR_H_ */