ds1621: Clean up coding style

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 114 insertions, 131 deletions

diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index ec1893e..60bf502 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -32,7 +32,7 @@
 /*
  * Device code
  */
-#define DTT_I2C_DEV_CODE 0x48			/* Dallas Semi's DS1621 */
+#define DTT_I2C_DEV_CODE 	0x48	/* Dallas Semi's DS1621 */
 #define DTT_READ_TEMP		0xAA
 #define DTT_READ_COUNTER	0xA8
 #define DTT_READ_SLOPE		0xA9
@@ -47,8 +47,8 @@
  */
 #define DTT_CONFIG_1SHOT	0x01
 #define DTT_CONFIG_POLARITY	0x02
-#define DTT_CONFIG_R0		0x04 /* ds1631 only */
-#define DTT_CONFIG_R1		0x08 /* ds1631 only */
+#define DTT_CONFIG_R0		0x04	/* ds1631 only */
+#define DTT_CONFIG_R1		0x08	/* ds1631 only */
 #define DTT_CONFIG_NVB		0x10
 #define DTT_CONFIG_TLF		0x20
 #define DTT_CONFIG_THF		0x40
@@ -57,149 +57,132 @@
 
 int dtt_read(int sensor, int reg)
 {
-    int dlen;
-    uchar data[2];
-
-    /*
-     * Calculate sensor address and command.
-     *
-     */
-    sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1621*/
-
-    /*
-     * Prepare to handle 2 byte result.
-     */
-    if ((reg == DTT_READ_TEMP) ||
-	(reg == DTT_TEMP_HIGH) || (reg == DTT_TEMP_LOW))
-	dlen = 2;
-    else
-	dlen = 1;
-
-    /*
-     * Now try to read the register.
-     */
-    if (i2c_read(sensor, reg, 1, data, dlen) != 0)
-	return 1;
-
-    /*
-     * Handle 2 byte result.
-     */
-    if (dlen == 2)
-	return ((int)((short)data[1] + (((short)data[0]) << 8)));
-
-    return (int)data[0];
-} /* dtt_read() */
+	int dlen;
+	uchar data[2];
+
+	/* Calculate sensor address and command */
+	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* Calculate addr of ds1621*/
+
+	/* Prepare to handle 2 byte result */
+	switch(reg) {
+	case DTT_READ_TEMP:
+	case DTT_TEMP_HIGH:
+	case DTT_TEMP_LOW:
+		dlen = 2;
+		break;
+	default:
+		dlen = 1;
+	}
+
+	/* Now try to read the register */
+	if (i2c_read(sensor, reg, 1, data, dlen) != 0)
+		return 1;
+
+	/* Handle 2 byte result */
+	if (dlen == 2)
+		return ((int)((short)data[1] + (((short)data[0]) << 8)));
+
+	return (int)data[0];
+}
 
 
 int dtt_write(int sensor, int reg, int val)
 {
-    int dlen;
-    uchar data[2];
-
-    /*
-     * Calculate sensor address and register.
-     *
-     */
-    sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);
-
-    /*
-     * Handle various data sizes.
-     */
-    if ((reg == DTT_READ_TEMP) ||
-	(reg == DTT_TEMP_HIGH) || (reg == DTT_TEMP_LOW)) {
-	dlen = 2;
-	data[0] = (char)((val >> 8) & 0xff);	/* MSB first */
-	data[1] = (char)(val & 0xff);
-    }
-    else if ((reg == DTT_WRITE_START_CONV) || (reg == DTT_WRITE_STOP_CONV)) {
-	dlen = 0;
-	data[0] = (char)0;
-	data[1] = (char)0;
-    }
-    else {
-	dlen = 1;
-	data[0] = (char)(val & 0xff);
-    }
-
-    /*
-     * Write value to device.
-     */
-    if (i2c_write(sensor, reg, 1, data, dlen) != 0)
-	return 1;
-
-    /*
-     * Poll NV memory busy bit in case write was to register stored in EEPROM
-     */
-    while(i2c_reg_read(sensor, DTT_CONFIG) & DTT_CONFIG_NVB)
-        ;
-
-    return 0;
-} /* dtt_write() */
+	int dlen;
+	uchar data[2];
+
+	/* Calculate sensor address and register */
+	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);
+
+	/* Handle various data sizes. */
+	switch(reg) {
+	case DTT_READ_TEMP:
+	case DTT_TEMP_HIGH:
+	case DTT_TEMP_LOW:
+		dlen = 2;
+		data[0] = (char)((val >> 8) & 0xff);	/* MSB first */
+		data[1] = (char)(val & 0xff);
+		break;
+	case DTT_WRITE_START_CONV:
+	case DTT_WRITE_STOP_CONV:
+		dlen = 0;
+		data[0] = (char)0;
+		data[1] = (char)0;
+		break;
+	default:
+		dlen = 1;
+		data[0] = (char)(val & 0xff);
+	}
+
+	/* Write value to device */
+	if (i2c_write(sensor, reg, 1, data, dlen) != 0)
+		return 1;
+
+	/* Poll NV memory busy bit in case write was to register stored in EEPROM */
+	while(i2c_reg_read(sensor, DTT_CONFIG) & DTT_CONFIG_NVB)
+		;
+
+	return 0;
+}
 
 
 static int _dtt_init(int sensor)
 {
-    int val;
-
-    /*
-     * Setup High Temp.
-     */
-    val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80;
-    if (dtt_write(sensor, DTT_TEMP_HIGH, val) != 0)
-	return 1;
-
-    /*
-     * Setup Low Temp - hysteresis.
-     */
-    val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
-    if (dtt_write(sensor, DTT_TEMP_LOW, val) != 0)
-	return 1;
-
-    /*
-     * Setup configuraton register
-     *
-     * Clear THF & TLF, Reserved = 1, Polarity = Active Low, One Shot = YES
-     *
-     * We run in polled mode, since there isn't any way to know if this
-     * lousy device is ready to provide temperature readings on power up.
-     */
-    val = 0x9;
-    if (dtt_write(sensor, DTT_CONFIG, val) != 0)
-	return 1;
-
-    return 0;
-} /* _dtt_init() */
+	int val;
+
+	/* Setup High Temp */
+	val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80;
+	if (dtt_write(sensor, DTT_TEMP_HIGH, val) != 0)
+		return 1;
+
+	/* Setup Low Temp - hysteresis */
+	val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+	if (dtt_write(sensor, DTT_TEMP_LOW, val) != 0)
+		return 1;
+
+	/*
+	 * Setup configuraton register
+	 *
+	 * Clear THF & TLF, Reserved = 1, Polarity = Active Low, One Shot = YES
+	 *
+	 * We run in polled mode, since there isn't any way to know if this
+	 * lousy device is ready to provide temperature readings on power up.
+	 */
+	val = 0x9;
+	if (dtt_write(sensor, DTT_CONFIG, val) != 0)
+		return 1;
+
+	return 0;
+}
 
 
 int dtt_init (void)
 {
-    int i;
-    unsigned char sensors[] = CONFIG_DTT_SENSORS;
+	int i;
+	unsigned char sensors[] = CONFIG_DTT_SENSORS;
 
-    for (i = 0; i < sizeof(sensors); i++) {
-	if (_dtt_init(sensors[i]) != 0)
-	    printf("DTT%d:  FAILED\n", i+1);
-	else
-	    printf("DTT%d:  %i C\n", i+1, dtt_get_temp(sensors[i]));
-    }
+	for (i = 0; i < sizeof(sensors); i++) {
+		if (_dtt_init(sensors[i]) != 0)
+			printf("DTT%d:  FAILED\n", i + 1);
+		else
+			printf("DTT%d:  %i C\n", i + 1, dtt_get_temp(sensors[i]));
+	}
 
-    return (0);
-} /* dtt_init() */
+	return (0);
+}
 
 
 int dtt_get_temp(int sensor)
 {
-    int i;
-
-    /*
-     * Start a conversion, may take up to 1 second.
-     */
-    dtt_write(sensor, DTT_WRITE_START_CONV, 0);
-    for (i = 0; i <= 10; i++) {
-	udelay(100000);
-	if (dtt_read(sensor, DTT_CONFIG) & DTT_CONFIG_DONE)
-	    break;
-    }
-
-    return (dtt_read(sensor, DTT_READ_TEMP) / 256);
-} /* dtt_get_temp() */
+	int i;
+
+	/* Start a conversion, may take up to 1 second. */
+	dtt_write(sensor, DTT_WRITE_START_CONV, 0);
+	for (i = 0; i <= 10; i++) {
+		udelay(100000);
+		if (dtt_read(sensor, DTT_CONFIG) & DTT_CONFIG_DONE)
+			break;
+	}
+
+	return (dtt_read(sensor, DTT_READ_TEMP) / 256);
+}