Merge branch 'master' of /home/stefan/git/u-boot/u-boot

114 files changed, 1134 insertions, 863 deletions

diff --git a/drivers/bios_emulator/x86emu/debug.c b/drivers/bios_emulator/x86emu/debug.c
index 5cbcc95..29fe3f1 100644
--- a/drivers/bios_emulator/x86emu/debug.c
+++ b/drivers/bios_emulator/x86emu/debug.c
@@ -50,7 +50,7 @@
 
 static void print_encoded_bytes(u16 s, u16 o);
 static void print_decoded_instruction(void);
-static int parse_line(char *s, int *ps, int *n);
+static int x86emu_parse_line(char *s, int *ps, int *n);
 
 /* should look something like debug's output. */
 void X86EMU_trace_regs(void)
@@ -257,7 +257,7 @@ void x86emu_single_step(void)
 	offset = M.x86.saved_ip;
 	while (!done) {
 		printk("-");
-		cmd = parse_line(s, ps, &ntok);
+		cmd = x86emu_parse_line(s, ps, &ntok);
 		switch (cmd) {
 		case 'u':
 			disassemble_forward(M.x86.saved_cs, (u16) offset, 10);
@@ -331,7 +331,7 @@ int X86EMU_trace_off(void)
 	return M.x86.debug &= ~(DEBUG_STEP_F | DEBUG_DECODE_F | DEBUG_TRACE_F);
 }
 
-static int parse_line(char *s, int *ps, int *n)
+static int x86emu_parse_line(char *s, int *ps, int *n)
 {
 	int cmd;
 
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 52fd108..2445e8c 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -676,7 +676,7 @@ void scsi_low_level_init(int busdevfunc)
 
 	linkmap = probe_ent->link_port_map;
 
-	for (i = 0; i < CFG_SCSI_MAX_SCSI_ID; i++) {
+	for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
 		if (((linkmap >> i) & 0x01)) {
 			if (ahci_port_start((u8) i)) {
 				printf("Can not start port %d\n", i);
diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c
index 4c26b36..ec37687 100644
--- a/drivers/block/ata_piix.c
+++ b/drivers/block/ata_piix.c
@@ -35,7 +35,7 @@
 #include <ide.h>
 #include <ata.h>
 
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 extern int curr_device;
 
 #define DEBUG_SATA 0		/*For debug prints set DEBUG_SATA to 1 */
@@ -173,10 +173,10 @@ init_sata (int dev)
 	    iobase4 | ATA_PCI_CTL_OFS;
 	port[1].ioaddr.bmdma_addr = iobase5 + 0x8;
 
-	for (i = 0; i < CFG_SATA_MAXBUS; i++)
+	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++)
 		sata_port (&port[i].ioaddr);
 
-	for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
 		if (!(sata_bus_probe (i))) {
 			port[i].port_state = 0;
 			printf ("SATA#%d port is not present \n", i);
@@ -190,15 +190,15 @@ init_sata (int dev)
 		}
 	}
 
-	for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+	for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
 		u8 j, devno;
 
 		if (port[i].port_state == 0)
 			continue;
-		for (j = 0; j < CFG_SATA_DEVS_PER_BUS; j++) {
+		for (j = 0; j < CONFIG_SYS_SATA_DEVS_PER_BUS; j++) {
 			sata_identify (i, j);
 			set_Feature_cmd (i, j);
-			devno = i * CFG_SATA_DEVS_PER_BUS + j;
+			devno = i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
 			if ((sata_dev_desc[devno].lba > 0) &&
 			    (sata_dev_desc[devno].blksz > 0)) {
 				dev_print (&sata_dev_desc[devno]);
@@ -206,7 +206,7 @@ init_sata (int dev)
 				init_part (&sata_dev_desc[devno]);
 				if (curr_device < 0)
 					curr_device =
-					    i * CFG_SATA_DEVS_PER_BUS + j;
+					    i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
 			}
 		}
 	}
@@ -271,7 +271,7 @@ sata_bus_softreset (int num)
 
 	port[num].dev_mask = 0;
 
-	for (i = 0; i < CFG_SATA_DEVS_PER_BUS; i++) {
+	for (i = 0; i < CONFIG_SYS_SATA_DEVS_PER_BUS; i++) {
 		if (!(sata_devchk (&port[num].ioaddr, i))) {
 			PRINTF ("dev_chk failed for dev#%d\n", i);
 		} else {
@@ -328,7 +328,7 @@ sata_bus_softreset (int num)
 void
 sata_identify (int num, int dev)
 {
-	u8 cmd = 0, status = 0, devno = num * CFG_SATA_DEVS_PER_BUS + dev;
+	u8 cmd = 0, status = 0, devno = num * CONFIG_SYS_SATA_DEVS_PER_BUS + dev;
 	u16 iobuf[ATA_SECT_SIZE];
 	u64 n_sectors = 0;
 	u8 mask = 0;
@@ -564,10 +564,10 @@ sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buff)
 	}
 #endif
 	/*Port Number */
-	num = device / CFG_SATA_DEVS_PER_BUS;
+	num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
 	/*dev on the port */
-	if (device >= CFG_SATA_DEVS_PER_BUS)
-		dev = device - CFG_SATA_DEVS_PER_BUS;
+	if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+		dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
 	else
 		dev = device;
 
@@ -671,10 +671,10 @@ sata_write (int device, ulong blknr,lbaint_t blkcnt, void * buff)
 	}
 #endif
 	/*Port Number */
-	num = device / CFG_SATA_DEVS_PER_BUS;
+	num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
 	/*dev on the Port */
-	if (device >= CFG_SATA_DEVS_PER_BUS)
-		dev = device - CFG_SATA_DEVS_PER_BUS;
+	if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+		dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
 	else
 		dev = device;
 
diff --git a/drivers/block/ata_piix.h b/drivers/block/ata_piix.h
index f9f0194..11885af 100644
--- a/drivers/block/ata_piix.h
+++ b/drivers/block/ata_piix.h
@@ -88,7 +88,7 @@ int init_sata (int dev);
 #endif
 
 #ifdef DRV_DECL			/*Defines Driver Specific variables */
-struct sata_port port[CFG_SATA_MAXBUS];
+struct sata_port port[CONFIG_SYS_SATA_MAXBUS];
 #endif
 
 #endif /* __ATA_PIIX_H__ */
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index 55f593a..2009d1e 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -26,23 +26,23 @@
 #include <fis.h>
 #include "fsl_sata.h"
 
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 
-#ifndef CFG_SATA1_FLAGS
-	#define CFG_SATA1_FLAGS	FLAGS_DMA
+#ifndef CONFIG_SYS_SATA1_FLAGS
+	#define CONFIG_SYS_SATA1_FLAGS	FLAGS_DMA
 #endif
-#ifndef CFG_SATA2_FLAGS
-	#define CFG_SATA2_FLAGS	FLAGS_DMA
+#ifndef CONFIG_SYS_SATA2_FLAGS
+	#define CONFIG_SYS_SATA2_FLAGS	FLAGS_DMA
 #endif
 
 static struct fsl_sata_info fsl_sata_info[] = {
 #ifdef CONFIG_SATA1
-	{CFG_SATA1, CFG_SATA1_FLAGS},
+	{CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
 #else
 	{0, 0},
 #endif
 #ifdef CONFIG_SATA2
-	{CFG_SATA2, CFG_SATA2_FLAGS},
+	{CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
 #else
 	{0, 0},
 #endif
@@ -123,7 +123,7 @@ int init_sata(int dev)
 	int i;
 	fsl_sata_t *sata;
 
-	if (dev < 0 || dev > (CFG_SATA_MAX_DEVICE - 1)) {
+	if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
 		printf("the sata index %d is out of ranges\n\r", dev);
 		return -1;
 	}
diff --git a/drivers/block/sata_sil3114.c b/drivers/block/sata_sil3114.c
index 8399737..351cf99 100644
--- a/drivers/block/sata_sil3114.c
+++ b/drivers/block/sata_sil3114.c
@@ -48,9 +48,9 @@ static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus);
 static void msleep (int count);
 
 static u32 iobase[6] = { 0, 0, 0, 0, 0, 0};	/* PCI BAR registers for device */
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 
-static struct sata_port port[CFG_SATA_MAX_DEVICE];
+static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE];
 
 static void output_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words)
 {
diff --git a/drivers/block/sil680.c b/drivers/block/sil680.c
index 052c3d3..e21fb9b 100644
--- a/drivers/block/sil680.c
+++ b/drivers/block/sil680.c
@@ -32,25 +32,25 @@
  * #define CONFIG_PCI_PNP
  * NOTE it may also be necessary to define this if the default of 8 is
  * incorrect for the target board (e.g. the sequoia board requires 0).
- * #define CFG_PCI_CACHE_LINE_SIZE	0
+ * #define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0
  *
  * #define CONFIG_CMD_IDE
  * #undef  CONFIG_IDE_8xx_DIRECT
  * #undef  CONFIG_IDE_LED
  * #undef  CONFIG_IDE_RESET
  * #define CONFIG_IDE_PREINIT
- * #define CFG_IDE_MAXBUS		2 - modify to suit
- * #define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) - modify to suit
- * #define CFG_ATA_BASE_ADDR	0
- * #define CFG_ATA_IDE0_OFFSET	0
- * #define CFG_ATA_IDE1_OFFSET	0
- * #define CFG_ATA_DATA_OFFSET	0
- * #define CFG_ATA_REG_OFFSET	0
- * #define CFG_ATA_ALT_OFFSET	0x0004
+ * #define CONFIG_SYS_IDE_MAXBUS		2 - modify to suit
+ * #define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) - modify to suit
+ * #define CONFIG_SYS_ATA_BASE_ADDR	0
+ * #define CONFIG_SYS_ATA_IDE0_OFFSET	0
+ * #define CONFIG_SYS_ATA_IDE1_OFFSET	0
+ * #define CONFIG_SYS_ATA_DATA_OFFSET	0
+ * #define CONFIG_SYS_ATA_REG_OFFSET	0
+ * #define CONFIG_SYS_ATA_ALT_OFFSET	0x0004
  *
  * The mapping for PCI IO-space.
  * NOTE this is the value for the sequoia board. Modify to suit.
- * #define CFG_PCI0_IO_SPACE   0xE8000000
+ * #define CONFIG_SYS_PCI0_IO_SPACE   0xE8000000
  */
 
 #include <common.h>
@@ -58,7 +58,7 @@
 #include <ide.h>
 #include <pci.h>
 
-extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 
 int ide_preinit (void)
 {
@@ -67,7 +67,7 @@ int ide_preinit (void)
 	int l;
 
 	status = 1;
-	for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+	for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
 		ide_bus_offset[l] = -ATA_STATUS;
 	}
 	devbusfn = pci_find_device (0x1095, 0x0680, 0);
@@ -77,11 +77,11 @@ int ide_preinit (void)
 		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
 				       (u32 *) &ide_bus_offset[0]);
 		ide_bus_offset[0] &= 0xfffffff8;
-		ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
+		ide_bus_offset[0] += CONFIG_SYS_PCI0_IO_SPACE;
 		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
 				       (u32 *) &ide_bus_offset[1]);
 		ide_bus_offset[1] &= 0xfffffff8;
-		ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
+		ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
 		/* init various things - taken from the Linux driver */
 		/* set PIO mode */
 		pci_write_config_byte(devbusfn, 0x80, 0x00);
diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c
index 44e998b..0c60bf8 100644
--- a/drivers/block/sym53c8xx.c
+++ b/drivers/block/sym53c8xx.c
@@ -426,7 +426,7 @@ void scsi_bus_reset(void)
 {
 	unsigned char t;
 	int i;
-	int end = CFG_SCSI_SPIN_UP_TIME*1000;
+	int end = CONFIG_SYS_SCSI_SPIN_UP_TIME*1000;
 
 	t=scsi_read_byte(SCNTL1);
 	scsi_write_byte(SCNTL1,(t | CRST));
@@ -836,10 +836,10 @@ void scsi_chip_init(void)
 	scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */
 	scsi_write_byte(SCNTL1,0x00);
 	scsi_write_byte(SCNTL2,0x00);
-#ifndef CFG_SCSI_SYM53C8XX_CCF    /* config value for none 40 mhz clocks */
+#ifndef CONFIG_SYS_SCSI_SYM53C8XX_CCF    /* config value for none 40 mhz clocks */
 	scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */
 #else
-	scsi_write_byte(SCNTL3,CFG_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
+	scsi_write_byte(SCNTL3,CONFIG_SYS_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
 #endif
 	scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */
 	scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */
diff --git a/drivers/block/systemace.c b/drivers/block/systemace.c
index dfaab52..e8dff0a 100644
--- a/drivers/block/systemace.c
+++ b/drivers/block/systemace.c
@@ -20,7 +20,7 @@
 
 /*
  * The Xilinx SystemACE chip support is activated by defining
- * CONFIG_SYSTEMACE to turn on support, and CFG_SYSTEMACE_BASE
+ * CONFIG_SYSTEMACE to turn on support, and CONFIG_SYS_SYSTEMACE_BASE
  * to set the base address of the device. This code currently
  * assumes that the chip is connected via a byte-wide bus.
  *
@@ -47,25 +47,25 @@
 /*
  * The ace_readw and writew functions read/write 16bit words, but the
  * offset value is the BYTE offset as most used in the Xilinx
- * datasheet for the SystemACE chip. The CFG_SYSTEMACE_BASE is defined
+ * datasheet for the SystemACE chip. The CONFIG_SYS_SYSTEMACE_BASE is defined
  * to be the base address for the chip, usually in the local
  * peripheral bus.
  */
-#if (CFG_SYSTEMACE_WIDTH == 8)
+#if (CONFIG_SYS_SYSTEMACE_WIDTH == 8)
 #if !defined(__BIG_ENDIAN)
-#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \
-			(readb(CFG_SYSTEMACE_BASE+off+1)))
-#define ace_writew(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \
-			      writeb(val, CFG_SYSTEMACE_BASE+off+1);}
+#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)<<8) | \
+			(readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)))
+#define ace_writew(val, off) {writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off); \
+			      writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
 #else
-#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \
-			(readb(CFG_SYSTEMACE_BASE+off+1)<<8))
-#define ace_writew(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \
-			      writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);}
+#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)) | \
+			(readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)<<8))
+#define ace_writew(val, off) {writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off); \
+			      writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
 #endif
 #else
-#define ace_readw(off) (in16(CFG_SYSTEMACE_BASE+off))
-#define ace_writew(val, off) (out16(CFG_SYSTEMACE_BASE+off,val))
+#define ace_readw(off) (in16(CONFIG_SYS_SYSTEMACE_BASE+off))
+#define ace_writew(val, off) (out16(CONFIG_SYS_SYSTEMACE_BASE+off,val))
 #endif
 
 /* */
@@ -120,7 +120,7 @@ block_dev_desc_t *systemace_get_dev(int dev)
 		/*
 		 * Ensure the correct bus mode (8/16 bits) gets enabled
 		 */
-		ace_writew(CFG_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
+		ace_writew(CONFIG_SYS_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
 
 		init_part(&systemace_dev);
 
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 7f7d3db..59302fa 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -35,6 +35,7 @@ COBJS-$(CONFIG_DTT_ADT7460) += adt7460.o
 COBJS-$(CONFIG_DTT_DS1621) += ds1621.o
 COBJS-$(CONFIG_DTT_DS1722) += ds1722.o
 COBJS-$(CONFIG_DTT_DS1775) += ds1775.o
+COBJS-$(CONFIG_DTT_LM63) += lm63.o
 COBJS-$(CONFIG_DTT_LM73) += lm73.o
 COBJS-$(CONFIG_DTT_LM75) += lm75.o
 COBJS-$(CONFIG_DTT_LM81) += lm81.o
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index b791ec0..d753e9a 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -81,7 +81,7 @@ typedef
 	}
 dtt_cfg_t;
 
-dtt_cfg_t dttcfg[] = CFG_DTT_ADM1021;
+dtt_cfg_t dttcfg[] = CONFIG_SYS_DTT_ADM1021;
 
 int
 dtt_read (int sensor, int reg)
@@ -174,7 +174,7 @@ dtt_init (void)
 	const char *const header = "DTT:   ";
 
 	/* switch to correct I2C bus */
-	I2C_SET_BUS(CFG_DTT_BUS_NUM);
+	I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
 
 	for (i = 0; i < sizeof(sensors); i++) {
 		if (_dtt_init(sensors[i]) != 0)
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 523f8be..d15a082 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -125,7 +125,7 @@ static int _dtt_init(int sensor)
     /*
      * Setup High Temp.
      */
-    val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80;
+    val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80;
     if (dtt_write(sensor, DTT_TEMP_HIGH, val) != 0)
 	return 1;
     udelay(50000);				/* Max 50ms */
@@ -133,7 +133,7 @@ static int _dtt_init(int sensor)
     /*
      * Setup Low Temp - hysteresis.
      */
-    val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+    val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
     if (dtt_write(sensor, DTT_TEMP_LOW, val) != 0)
 	return 1;
     udelay(50000);				/* Max 50ms */
diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c
index 6a4d8e5..80fb26f 100644
--- a/drivers/hwmon/ds1775.c
+++ b/drivers/hwmon/ds1775.c
@@ -24,7 +24,7 @@
 #include <i2c.h>
 #include <dtt.h>
 
-#define DTT_I2C_DEV_CODE	CFG_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
+#define DTT_I2C_DEV_CODE	CONFIG_SYS_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
 #define DTT_READ_TEMP		0x0
 #define DTT_CONFIG		0x1
 #define DTT_TEMP_HYST		0x2
@@ -105,7 +105,7 @@ static int _dtt_init(int sensor)
 	/*
 	 * Setup High Temp
 	 */
-	val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80;
+	val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80;
 	if (dtt_write(sensor, DTT_TEMP_OS, val) != 0)
 		return 1;
 	udelay(50000);			/* Max 50ms */
@@ -113,7 +113,7 @@ static int _dtt_init(int sensor)
 	/*
 	 * Setup Low Temp - hysteresis
 	 */
-	val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+	val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
 	if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
 		return 1;
 	udelay(50000);			/* Max 50ms */
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
new file mode 100644
index 0000000..03616e1
--- /dev/null
+++ b/drivers/hwmon/lm63.c
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2007-2008
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ * based on lm75.c by Bill Hunter
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * National LM63 Temperature Sensor
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <dtt.h>
+
+#define DTT_I2C_DEV_CODE 0x4C	/* National LM63 device */
+
+#define DTT_READ_TEMP_RMT_MSB	0x01
+#define DTT_CONFIG		0x03
+#define DTT_READ_TEMP_RMT_LSB	0x10
+#define DTT_TACHLIM_LSB		0x48
+#define DTT_TACHLIM_MSB		0x49
+#define DTT_FAN_CONFIG		0x4A
+#define DTT_PWM_FREQ		0x4D
+#define DTT_PWM_LOOKUP_BASE	0x50
+
+struct pwm_lookup_entry {
+	u8 temp;
+	u8 pwm;
+};
+
+/*
+ * Device code
+ */
+
+int dtt_read(int sensor, int reg)
+{
+	int dlen;
+	uchar data[2];
+
+	/*
+	 * Calculate sensor address and register.
+	 */
+	sensor = DTT_I2C_DEV_CODE;	/* address of lm63 is not adjustable */
+
+	dlen = 1;
+
+	/*
+	 * Now try to read the register.
+	 */
+	if (i2c_read(sensor, reg, 1, data, dlen) != 0)
+		return -1;
+
+	return (int)data[0];
+}				/* dtt_read() */
+
+int dtt_write(int sensor, int reg, int val)
+{
+	int dlen;
+	uchar data[2];
+
+	/*
+	 * Calculate sensor address and register.
+	 */
+	sensor = DTT_I2C_DEV_CODE;	/* address of lm63 is not adjustable */
+
+	dlen = 1;
+	data[0] = (char)(val & 0xff);
+
+	/*
+	 * Write value to register.
+	 */
+	if (i2c_write(sensor, reg, 1, data, dlen) != 0)
+		return 1;
+
+	return 0;
+}				/* dtt_write() */
+
+static int _dtt_init(int sensor)
+{
+	int i;
+	int val;
+
+	struct pwm_lookup_entry pwm_lookup[] = CONFIG_DTT_PWM_LOOKUPTABLE;
+
+	/*
+	 * Set PWM Frequency to 2.5% resolution
+	 */
+	val = 20;
+	if (dtt_write(sensor, DTT_PWM_FREQ, val) != 0)
+		return 1;
+
+	/*
+	 * Set Tachometer Limit
+	 */
+	val = CONFIG_DTT_TACH_LIMIT;
+	if (dtt_write(sensor, DTT_TACHLIM_LSB, val & 0xff) != 0)
+		return 1;
+	if (dtt_write(sensor, DTT_TACHLIM_MSB, (val >> 8) & 0xff) != 0)
+		return 1;
+
+	/*
+	 * Setup PWM Lookup-Table
+	 */
+	for (i = 0; i < sizeof(pwm_lookup) / sizeof(struct pwm_lookup_entry);
+	     i++) {
+		int address = DTT_PWM_LOOKUP_BASE + 2 * i;
+		val = pwm_lookup[i].temp;
+		if (dtt_write(sensor, address, val) != 0)
+			return 1;
+		val = pwm_lookup[i].pwm;
+		if (dtt_write(sensor, address + 1, val) != 0)
+			return 1;
+	}
+
+	/*
+	 * Enable PWM Lookup-Table, PWM Clock 360 kHz, Tachometer Mode 2
+	 */
+	val = 0x02;
+	if (dtt_write(sensor, DTT_FAN_CONFIG, val) != 0)
+		return 1;
+
+	/*
+	 * Enable Tach input
+	 */
+	val = dtt_read(sensor, DTT_CONFIG) | 0x04;
+	if (dtt_write(sensor, DTT_CONFIG, val) != 0)
+		return 1;
+
+	return 0;
+}
+
+int dtt_get_temp(int sensor)
+{
+	s16 temp = (dtt_read(sensor, DTT_READ_TEMP_RMT_MSB) << 8)
+	    | (dtt_read(sensor, DTT_READ_TEMP_RMT_LSB));
+
+	/* Ignore LSB for now, U-Boot only prints natural numbers */
+	return temp >> 8;
+}
+
+int dtt_init(void)
+{
+	int i;
+	unsigned char sensors[] = CONFIG_DTT_SENSORS;
+	const char *const header = "DTT:   ";
+
+	for (i = 0; i < sizeof(sensors); i++) {
+		if (_dtt_init(sensors[i]) != 0)
+			printf("%s%d FAILED INIT\n", header, i + 1);
+		else
+			printf("%s%d is %i C\n", header, i + 1,
+			       dtt_get_temp(sensors[i]));
+	}
+
+	return 0;
+}
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index dd24683..7b5d893 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -124,11 +124,11 @@ static int _dtt_init(int const sensor)
 	/*
 	 * Setup THIGH (upper-limit) and TLOW (lower-limit) registers
 	 */
-	val = CFG_DTT_MAX_TEMP << 7;
+	val = CONFIG_SYS_DTT_MAX_TEMP << 7;
 	if (dtt_write(sensor, DTT_TEMP_HIGH, val))
 		return -1;
 
-	val = CFG_DTT_MIN_TEMP << 7;
+	val = CONFIG_SYS_DTT_MIN_TEMP << 7;
 	if (dtt_write(sensor, DTT_TEMP_LOW, val))
 		return -1;
 	/*
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 6770cdd..8119821 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -32,8 +32,8 @@
 /*
  * Device code
  */
-#if defined(CFG_I2C_DTT_ADDR)
-#define DTT_I2C_DEV_CODE CFG_I2C_DTT_ADDR
+#if defined(CONFIG_SYS_I2C_DTT_ADDR)
+#define DTT_I2C_DEV_CODE CONFIG_SYS_I2C_DTT_ADDR
 #else
 #define DTT_I2C_DEV_CODE 0x48			/* ON Semi's LM75 device */
 #endif
@@ -44,159 +44,141 @@
 
 int dtt_read(int sensor, int reg)
 {
-    int dlen;
-    uchar data[2];
+	int dlen;
+	uchar data[2];
 
 #ifdef CONFIG_DTT_AD7414
-    /*
-     * On AD7414 the first value upon bootup is not read correctly.
-     * This is most likely because of the 800ms update time of the
-     * temp register in normal update mode. To get current values
-     * each time we issue the "dtt" command including upon powerup
-     * we switch into one-short mode.
-     *
-     * Issue one-shot mode command
-     */
-    dtt_write(sensor, DTT_CONFIG, 0x64);
+	/*
+	 * On AD7414 the first value upon bootup is not read correctly.
+	 * This is most likely because of the 800ms update time of the
+	 * temp register in normal update mode. To get current values
+	 * each time we issue the "dtt" command including upon powerup
+	 * we switch into one-short mode.
+	 *
+	 * Issue one-shot mode command
+	 */
+	dtt_write(sensor, DTT_CONFIG, 0x64);
 #endif
 
-    /*
-     * Validate 'reg' param
-     */
-    if((reg < 0) || (reg > 3))
-	return -1;
-
-    /*
-     * Calculate sensor address and register.
-     */
-    sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* calculate address of lm75 */
-
-    /*
-     * Prepare to handle 2 byte result.
-     */
-    if ((reg == DTT_READ_TEMP) ||
-	(reg == DTT_TEMP_HYST) ||
-	(reg == DTT_TEMP_SET))
-	dlen = 2;
-    else
-	dlen = 1;
-
-    /*
-     * Now try to read the register.
-     */
-    if (i2c_read(sensor, reg, 1, data, dlen) != 0)
-	return -1;
-
-    /*
-     * Handle 2 byte result.
-     */
-    if (dlen == 2)
-	return ((int)((short)data[1] + (((short)data[0]) << 8)));
-
-
-    return (int)data[0];
+	/* Validate 'reg' param */
+	if((reg < 0) || (reg > 3))
+		return -1;
+
+	/* Calculate sensor address and register. */
+	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);
+
+	/* Prepare to handle 2 byte result. */
+	if ((reg == DTT_READ_TEMP) ||
+		(reg == DTT_TEMP_HYST) ||
+		(reg == DTT_TEMP_SET))
+			dlen = 2;
+	else
+		dlen = 1;
+
+	/* Now try to read the register. */
+	if (i2c_read(sensor, reg, 1, data, dlen) != 0)
+		return -1;
+
+	/* Handle 2 byte result. */
+	if (dlen == 2)
+		return ((int)((short)data[1] + (((short)data[0]) << 8)));
+
+	return (int)data[0];
 } /* dtt_read() */
 
 
 int dtt_write(int sensor, int reg, int val)
 {
-    int dlen;
-    uchar data[2];
-
-    /*
-     * Validate 'reg' param
-     */
-    if ((reg < 0) || (reg > 3))
-	return 1;
-
-    /*
-     * Calculate sensor address and register.
-     */
-    sensor = DTT_I2C_DEV_CODE + (sensor & 0x07); /* calculate address of lm75 */
-
-    /*
-     * Handle 2 byte values.
-     */
-    if ((reg == DTT_READ_TEMP) ||
-	(reg == DTT_TEMP_HYST) ||
-	(reg == DTT_TEMP_SET)) {
-	dlen = 2;
-	data[0] = (char)((val >> 8) & 0xff);	/* MSB first */
-	data[1] = (char)(val & 0xff);
-    } else {
-	dlen = 1;
-	data[0] = (char)(val & 0xff);
-    }
-
-    /*
-     * Write value to register.
-     */
-    if (i2c_write(sensor, reg, 1, data, dlen) != 0)
-	return 1;
-
-    return 0;
+	int dlen;
+	uchar data[2];
+
+	/* Validate 'reg' param */
+	if ((reg < 0) || (reg > 3))
+		return 1;
+
+	/* Calculate sensor address and register. */
+	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);
+
+	/* Handle 2 byte values. */
+	if ((reg == DTT_READ_TEMP) ||
+		(reg == DTT_TEMP_HYST) ||
+		(reg == DTT_TEMP_SET)) {
+			dlen = 2;
+		data[0] = (char)((val >> 8) & 0xff);	/* MSB first */
+		data[1] = (char)(val & 0xff);
+	} else {
+		dlen = 1;
+		data[0] = (char)(val & 0xff);
+	}
+
+	/* Write value to register. */
+	if (i2c_write(sensor, reg, 1, data, dlen) != 0)
+		return 1;
+
+	return 0;
 } /* dtt_write() */
 
 
 static int _dtt_init(int sensor)
 {
-    int val;
-
-    /*
-     * Setup TSET ( trip point ) register
-     */
-    val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */
-    if (dtt_write(sensor, DTT_TEMP_SET, val) != 0)
-	return 1;
-
-    /*
-     * Setup THYST ( untrip point ) register - Hysteresis
-     */
-    val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
-    if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
-	return 1;
-
-    /*
-     * Setup configuraton register
-     */
+	int val;
+
+	/* Setup TSET ( trip point ) register */
+	val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */
+	if (dtt_write(sensor, DTT_TEMP_SET, val) != 0)
+		return 1;
+
+	/* Setup THYST ( untrip point ) register - Hysteresis */
+	val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+	if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
+		return 1;
+
+	/* Setup configuraton register */
 #ifdef CONFIG_DTT_AD7414
-    /* config = alert active low and disabled */
-    val = 0x60;
+	/* config = alert active low and disabled */
+	val = 0x60;
 #else
-    /* config = 6 sample integration, int mode, active low, and enable */
-    val = 0x18;
+	/* config = 6 sample integration, int mode, active low, and enable */
+	val = 0x18;
 #endif
-    if (dtt_write(sensor, DTT_CONFIG, val) != 0)
-	return 1;
+	if (dtt_write(sensor, DTT_CONFIG, val) != 0)
+		return 1;
 
-    return 0;
+	return 0;
 } /* _dtt_init() */
 
 
 int dtt_init (void)
 {
-    int i;
-    unsigned char sensors[] = CONFIG_DTT_SENSORS;
-    const char *const header = "DTT:   ";
+	int i;
+	unsigned char sensors[] = CONFIG_DTT_SENSORS;
+	const char *const header = "DTT:   ";
+	int old_bus;
+
+	/* switch to correct I2C bus */
+	old_bus = I2C_GET_BUS();
+	I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
 
-    for (i = 0; i < sizeof(sensors); i++) {
+	for (i = 0; i < sizeof(sensors); i++) {
 	if (_dtt_init(sensors[i]) != 0)
-	    printf("%s%d FAILED INIT\n", header, i+1);
+		printf("%s%d FAILED INIT\n", header, i+1);
 	else
-	    printf("%s%d is %i C\n", header, i+1,
-		   dtt_get_temp(sensors[i]));
-    }
+		printf("%s%d is %i C\n", header, i+1,
+		dtt_get_temp(sensors[i]));
+	}
+	/* switch back to original I2C bus */
+	I2C_SET_BUS(old_bus);
 
-    return (0);
+	return (0);
 } /* dtt_init() */
 
 int dtt_get_temp(int sensor)
 {
-    int const ret = dtt_read(sensor, DTT_READ_TEMP);
+	int const ret = dtt_read(sensor, DTT_READ_TEMP);
 
-    if (ret < 0) {
-	printf("DTT temperature read failed.\n");
-	return 0;
-    }
-    return (int)((int16_t) ret / 256);
+	if (ret < 0) {
+		printf("DTT temperature read failed.\n");
+		return 0;
+	}
+	return (int)((int16_t) ret / 256);
 } /* dtt_get_temp() */
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 264553d..281a88b 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -26,7 +26,7 @@
 #include <asm/io.h>
 #include <asm/fsl_i2c.h>	/* HW definitions */
 
-#define I2C_TIMEOUT	(CFG_HZ / 4)
+#define I2C_TIMEOUT	(CONFIG_SYS_HZ / 4)
 
 #define I2C_READ_BIT  1
 #define I2C_WRITE_BIT 0
@@ -38,18 +38,18 @@ DECLARE_GLOBAL_DATA_PTR;
  * runs from ROM, and we can't switch buses because we can't modify
  * the global variables.
  */
-#ifdef CFG_SPD_BUS_NUM
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM;
+#ifdef CONFIG_SYS_SPD_BUS_NUM
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CONFIG_SYS_SPD_BUS_NUM;
 #else
 static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
 #endif
 
-static unsigned int i2c_bus_speed[2] = {CFG_I2C_SPEED, CFG_I2C_SPEED};
+static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
 
 static const struct fsl_i2c *i2c_dev[2] = {
-	(struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET),
-#ifdef CFG_I2C2_OFFSET
-	(struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET)
+	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET),
+#ifdef CONFIG_SYS_I2C2_OFFSET
+	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET)
 #endif
 };
 
@@ -176,7 +176,7 @@ i2c_init(int speed, int slaveadd)
 	struct fsl_i2c *dev;
 	unsigned int temp;
 
-	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
+	dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
 
 	writeb(0, &dev->cr);			/* stop I2C controller */
 	udelay(5);				/* let it shutdown in peace */
@@ -187,8 +187,8 @@ i2c_init(int speed, int slaveadd)
 	writeb(0x0, &dev->sr);			/* clear status register */
 	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
 
-#ifdef	CFG_I2C2_OFFSET
-	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET);
+#ifdef	CONFIG_SYS_I2C2_OFFSET
+	dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET);
 
 	writeb(0, &dev->cr);			/* stop I2C controller */
 	udelay(5);				/* let it shutdown in peace */
@@ -386,7 +386,7 @@ i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
 
 int i2c_set_bus_num(unsigned int bus)
 {
-#ifdef CFG_I2C2_OFFSET
+#ifdef CONFIG_SYS_I2C2_OFFSET
 	if (bus > 1) {
 #else
 	if (bus > 0) {
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 1f6ba1f..eedad06 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -47,14 +47,14 @@
 #define I2SR_IIF	(1 << 1)
 #define I2SR_RX_NO_AK	(1 << 0)
 
-#ifdef CFG_I2C_MX31_PORT1
+#ifdef CONFIG_SYS_I2C_MX31_PORT1
 #define I2C_BASE	0x43f80000
-#elif defined (CFG_I2C_MX31_PORT2)
+#elif defined (CONFIG_SYS_I2C_MX31_PORT2)
 #define I2C_BASE	0x43f98000
-#elif defined (CFG_I2C_MX31_PORT3)
+#elif defined (CONFIG_SYS_I2C_MX31_PORT3)
 #define I2C_BASE	0x43f84000
 #else
-#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver"
+#error "define CONFIG_SYS_I2C_MX31_PORTx to use the mx31 I2C driver"
 #endif
 
 #ifdef DEBUG
diff --git a/drivers/i2c/omap1510_i2c.c b/drivers/i2c/omap1510_i2c.c
index 388951d..a4e6227 100644
--- a/drivers/i2c/omap1510_i2c.c
+++ b/drivers/i2c/omap1510_i2c.c
@@ -205,7 +205,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	for (i = 0; i < len; i++) {
 		if (i2c_read_byte (chip, addr + i, &buffer[i])) {
 			printf ("I2C read: I/O error\n");
-			i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 			return 1;
 		}
 	}
@@ -230,7 +230,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	for (i = 0; i < len; i++) {
 		if (i2c_write_byte (chip, addr + i, buffer[i])) {
 			printf ("I2C read: I/O error\n");
-			i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 			return 1;
 		}
 	}
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index d16cfb1..134dccb 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -252,7 +252,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	for (i = 0; i < len; i++) {
 		if (i2c_read_byte (chip, addr + i, &buffer[i])) {
 			printf ("I2C read: I/O error\n");
-			i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 			return 1;
 		}
 	}
@@ -277,7 +277,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
 	for (i = 0; i < len; i++) {
 		if (i2c_write_byte (chip, addr + i, buffer[i])) {
 			printf ("I2C read: I/O error\n");
-			i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 			return 1;
 		}
 	}
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 23db2ee..ebe60e2 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #ifdef	CONFIG_MPC8260			/* only valid for MPC8260 */
 #include <ioports.h>
+#include <asm/io.h>
 #endif
 #ifdef	CONFIG_AT91RM9200		/* need this for the at91rm9200 */
 #include <asm/io.h>
@@ -39,6 +40,9 @@
 #ifdef CONFIG_LPC2292
 #include <asm/arch/hardware.h>
 #endif
+#ifdef	CONFIG_MPC866			/* only valid for MPC866 */
+#include <asm/io.h>
+#endif
 #include <i2c.h>
 
 /* #define	DEBUG_I2C	*/
@@ -68,17 +72,23 @@ DECLARE_GLOBAL_DATA_PTR;
 #define PRINTD(fmt,args...)
 #endif
 
+#if defined(CONFIG_I2C_MULTI_BUS)
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+#endif /* CONFIG_I2C_MULTI_BUS */
+
 /*-----------------------------------------------------------------------
  * Local functions
  */
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
 static void  send_reset	(void);
+#endif
 static void  send_start	(void);
 static void  send_stop	(void);
 static void  send_ack	(int);
 static int   write_byte	(uchar byte);
 static uchar read_byte	(int);
 
-
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
 /*-----------------------------------------------------------------------
  * Send a reset sequence consisting of 9 clocks with the data signal high
  * to clock any confused device back into an idle state.  Also send a
@@ -86,12 +96,7 @@ static uchar read_byte	(int);
  */
 static void send_reset(void)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 	int j;
 
 	I2C_SCL(1);
@@ -111,18 +116,14 @@ static void send_reset(void)
 	send_stop();
 	I2C_TRISTATE;
 }
+#endif
 
 /*-----------------------------------------------------------------------
  * START: High -> Low on SDA while SCL is High
  */
 static void send_start(void)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 
 	I2C_DELAY;
 	I2C_SDA(1);
@@ -139,12 +140,7 @@ static void send_start(void)
  */
 static void send_stop(void)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 
 	I2C_SCL(0);
 	I2C_DELAY;
@@ -164,12 +160,7 @@ static void send_stop(void)
  */
 static void send_ack(int ack)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 
 	I2C_SCL(0);
 	I2C_DELAY;
@@ -189,12 +180,7 @@ static void send_ack(int ack)
  */
 static int write_byte(uchar data)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 	int j;
 	int nack;
 
@@ -230,6 +216,51 @@ static int write_byte(uchar data)
 	return(nack);	/* not a nack is an ack */
 }
 
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * Functions for multiple I2C bus handling
+ */
+unsigned int i2c_get_bus_num(void)
+{
+	return i2c_bus_num;
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+#if defined(CONFIG_I2C_MUX)
+	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
+		i2c_bus_num = bus;
+	} else {
+		int	ret;
+
+		ret = i2x_mux_select_mux(bus);
+		if (ret == 0)
+			i2c_bus_num = bus;
+		else
+			return ret;
+	}
+#else
+	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
+		return -1;
+	i2c_bus_num = bus;
+#endif
+	return 0;
+}
+
+/* TODO: add 100/400k switching */
+unsigned int i2c_get_bus_speed(void)
+{
+	return CONFIG_SYS_I2C_SPEED;
+}
+
+int i2c_set_bus_speed(unsigned int speed)
+{
+	if (speed != CONFIG_SYS_I2C_SPEED)
+		return -1;
+
+	return 0;
+}
+#endif
 
 /*-----------------------------------------------------------------------
  * if ack == I2C_ACK, ACK the byte so can continue reading, else
@@ -237,12 +268,7 @@ static int write_byte(uchar data)
  */
 static uchar read_byte(int ack)
 {
-#ifdef	CONFIG_MPC8260
-	volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef	CONFIG_8xx
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
 	int  data;
 	int  j;
 
@@ -275,6 +301,12 @@ static uchar read_byte(int ack)
  */
 void i2c_init (int speed, int slaveaddr)
 {
+#if defined(CONFIG_SYS_I2C_INIT_BOARD)
+	/* call board specific i2c bus reset routine before accessing the   */
+	/* environment, which might be in a chip on that bus. For details   */
+	/* about this problem see doc/I2C_Edge_Conditions.                  */
+	i2c_init_board();
+#else
 	/*
 	 * WARNING: Do NOT save speed in a static variable: if the
 	 * I2C routines are called before RAM is initialized (to read
@@ -282,6 +314,7 @@ void i2c_init (int speed, int slaveaddr)
 	 * system will crash.
 	 */
 	send_reset ();
+#endif
 }
 
 /*-----------------------------------------------------------------------
@@ -313,7 +346,7 @@ int  i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n",
 		chip, addr, alen, buffer, len);
 
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/*
 	 * EEPROM chips that implement "address overflow" are ones
 	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -325,7 +358,7 @@ int  i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	 * still be one byte because the extra address bits are
 	 * hidden in the chip address.
 	 */
-	chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+	chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 
 	PRINTD("i2c_read: fix addr_overflow: chip %02X addr %02X\n",
 		chip, addr);
diff --git a/drivers/i2c/tsi108_i2c.c b/drivers/i2c/tsi108_i2c.c
index 695e393..fda822c 100644
--- a/drivers/i2c/tsi108_i2c.c
+++ b/drivers/i2c/tsi108_i2c.c
@@ -60,14 +60,14 @@ static int i2c_read_byte (
 		chan_offset = TSI108_I2C_SDRAM_OFFSET;
 
 	/* Check if I2C operation is in progress */
-	temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+	temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
 
 	if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
 			  I2C_CNTRL2_START))) {
 		/* Set device address and operation (read = 0) */
 		temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
 		    ((chip_addr >> 3) & 0x0F);
-		*(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
 		    temp;
 
 		/* Issue the read command
@@ -75,13 +75,13 @@ static int i2c_read_byte (
 		 * (size = 1 byte, lane = 0)
 		 */
 
-		*(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
 		    (I2C_CNTRL2_START);
 
 		/* Wait until operation completed */
 		do {
 			/* Read I2C operation status */
-			temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+			temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
 
 			if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
 				if (0 == (temp &
@@ -90,7 +90,7 @@ static int i2c_read_byte (
 				    ) {
 					op_status = TSI108_I2C_SUCCESS;
 
-					temp = *(u32 *) (CFG_TSI108_CSR_BASE +
+					temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
 							 chan_offset +
 							 I2C_RD_DATA);
 
@@ -172,25 +172,25 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
 	u32 op_status = TSI108_I2C_TIMEOUT_ERR;
 
 	/* Check if I2C operation is in progress */
-	temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+	temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
 
 	if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
 		/* Place data into the I2C Tx Register */
-		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
 			  I2C_TX_DATA) = (u32) * buffer;
 
 		/* Set device address and operation  */
 		temp =
 		    I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
 		    ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
-		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
 			  I2C_CNTRL1) = temp;
 
 		/* Issue the write command (at this moment all other parameters
 		 * are 0 (size = 1 byte, lane = 0)
 		 */
 
-		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
 			  I2C_CNTRL2) = (I2C_CNTRL2_START);
 
 		op_status = TSI108_I2C_TIMEOUT_ERR;
@@ -198,7 +198,7 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
 		/* Wait until operation completed */
 		do {
 			/* Read I2C operation status */
-			temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+			temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
 
 			if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
 				if (0 == (temp &
diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c
index d152768..58094c9 100644
--- a/drivers/input/i8042.c
+++ b/drivers/input/i8042.c
@@ -41,7 +41,7 @@ extern void gt_cpcidvi_out8(u32 offset, u8 data);
 
 #ifdef CONFIG_CONSOLE_CURSOR
 extern void console_cursor (int state);
-static int blinkCount = CFG_CONSOLE_BLINK_COUNT;
+static int blinkCount = CONFIG_SYS_CONSOLE_BLINK_COUNT;
 static int cursor_state = 0;
 #endif
 
@@ -368,7 +368,7 @@ int i8042_tstc (void)
     {
 	cursor_state ^= 1;
 	console_cursor (cursor_state);
-	blinkCount = CFG_CONSOLE_BLINK_COUNT;
+	blinkCount = CONFIG_SYS_CONSOLE_BLINK_COUNT;
 	udelay (10);
     }
 #endif
@@ -409,7 +409,7 @@ int i8042_getc (void)
 	    {
 		cursor_state ^= 1;
 		console_cursor (cursor_state);
-		blinkCount = CFG_CONSOLE_BLINK_COUNT;
+		blinkCount = CONFIG_SYS_CONSOLE_BLINK_COUNT;
 	    }
 	    udelay (10);
 #endif
diff --git a/drivers/input/keyboard.c b/drivers/input/keyboard.c
index a634d76..512b9f2 100644
--- a/drivers/input/keyboard.c
+++ b/drivers/input/keyboard.c
@@ -258,12 +258,12 @@ void handle_scancode(unsigned char scancode)
  * Init
  ******************************************************************/
 
-#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 extern int overwrite_console (void);
 #define OVERWRITE_CONSOLE overwrite_console ()
 #else
 #define OVERWRITE_CONSOLE 0
-#endif /* CFG_CONSOLE_OVERWRITE_ROUTINE */
+#endif /* CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE */
 
 int kbd_init (void)
 {
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
index 480ffa2..1af3fde 100644
--- a/drivers/input/ps2ser.c
+++ b/drivers/input/ps2ser.c
@@ -18,7 +18,7 @@
 #include <asm/io.h>
 #include <asm/atomic.h>
 #include <ps2mult.h>
-#if defined(CFG_NS16550) || defined(CONFIG_MPC85xx)
+#if defined(CONFIG_SYS_NS16550) || defined(CONFIG_MPC85xx)
 #include <ns16550.h>
 #endif
 
@@ -51,9 +51,9 @@ DECLARE_GLOBAL_DATA_PTR;
       defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
 
 #if CONFIG_PS2SERIAL == 1
-#define COM_BASE (CFG_CCSRBAR+0x4500)
+#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4500)
 #elif CONFIG_PS2SERIAL == 2
-#define COM_BASE (CFG_CCSRBAR+0x4600)
+#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4600)
 #else
 #error CONFIG_PS2SERIAL must be in 1 ... 2
 #endif
@@ -88,7 +88,7 @@ int ps2ser_init(void)
 	/* select clock sources */
 #if defined(CONFIG_MGT5100)
 	psc->psc_clock_select = 0xdd00;
-	baseclk = (CFG_MPC5XXX_CLKIN + 16) / 32;
+	baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
 #elif defined(CONFIG_MPC5200)
 	psc->psc_clock_select = 0;
 	baseclk = (gd->ipb_clk + 16) / 32;
@@ -129,8 +129,8 @@ int ps2ser_init(void)
 
 	com_port->ier = 0x00;
 	com_port->lcr = LCR_BKSE | LCR_8N1;
-	com_port->dll = (CFG_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
-	com_port->dlm = ((CFG_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
+	com_port->dll = (CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
+	com_port->dlm = ((CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
 	com_port->lcr = LCR_8N1;
 	com_port->mcr = (MCR_DTR | MCR_RTS);
 	com_port->fcr = (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR);
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 2e94614..44c9e91 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -46,12 +46,13 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
-	volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+	volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
 	volatile u32 *lawbar = base + 8 * idx;
 	volatile u32 *lawar = base + 8 * idx + 2;
 
 	gd->used_laws |= (1 << idx);
 
+	out_be32(lawar, 0);
 	out_be32(lawbar, addr >> 12);
 	out_be32(lawar, LAWAR_EN | ((u32)id << 20) | (u32)sz);
 
@@ -91,7 +92,7 @@ int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 
 void disable_law(u8 idx)
 {
-	volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+	volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
 	volatile u32 *lawbar = base + 8 * idx;
 	volatile u32 *lawar = base + 8 * idx + 2;
 
@@ -105,7 +106,7 @@ void disable_law(u8 idx)
 
 void print_laws(void)
 {
-	volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+	volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
 	volatile u32 *lawbar = base;
 	volatile u32 *lawar = base + 2;
 	int i;
diff --git a/drivers/misc/ns87308.c b/drivers/misc/ns87308.c
index 6642c2e..9130a1f 100644
--- a/drivers/misc/ns87308.c
+++ b/drivers/misc/ns87308.c
@@ -27,7 +27,7 @@
 
 void initialise_ns87308 (void)
 {
-#ifdef CFG_NS87308_PS2MOD
+#ifdef CONFIG_SYS_NS87308_PS2MOD
 	unsigned char data;
 
 	/*
@@ -38,80 +38,80 @@ void initialise_ns87308 (void)
 	write_pnp_config(SUPOERIO_CONF1, data);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_KBC1)
-	PNP_SET_DEVICE_BASE(LDEV_KBC1, CFG_NS87308_KBC1_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_KBC1)
+	PNP_SET_DEVICE_BASE(LDEV_KBC1, CONFIG_SYS_NS87308_KBC1_BASE);
 	write_pnp_config(LUN_CONFIG_REG, 0);
 	write_pnp_config(CBASE_HIGH, 0x00);
 	write_pnp_config(CBASE_LOW, 0x64);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_MOUSE)
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_MOUSE)
 	PNP_ACTIVATE_DEVICE(LDEV_MOUSE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_RTC_APC)
-	PNP_SET_DEVICE_BASE(LDEV_RTC_APC, CFG_NS87308_RTC_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RTC_APC)
+	PNP_SET_DEVICE_BASE(LDEV_RTC_APC, CONFIG_SYS_NS87308_RTC_BASE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_FDC)
-	PNP_SET_DEVICE_BASE(LDEV_FDC, CFG_NS87308_FDC_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_FDC)
+	PNP_SET_DEVICE_BASE(LDEV_FDC, CONFIG_SYS_NS87308_FDC_BASE);
 	write_pnp_config(LUN_CONFIG_REG, 0x40);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_RARP)
-	PNP_SET_DEVICE_BASE(LDEV_PARP, CFG_NS87308_LPT_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RARP)
+	PNP_SET_DEVICE_BASE(LDEV_PARP, CONFIG_SYS_NS87308_LPT_BASE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_UART1)
-	PNP_SET_DEVICE_BASE(LDEV_UART1, CFG_NS87308_UART1_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART1)
+	PNP_SET_DEVICE_BASE(LDEV_UART1, CONFIG_SYS_NS87308_UART1_BASE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_UART2)
-	PNP_SET_DEVICE_BASE(LDEV_UART2, CFG_NS87308_UART2_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART2)
+	PNP_SET_DEVICE_BASE(LDEV_UART2, CONFIG_SYS_NS87308_UART2_BASE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_GPIO)
-	PNP_SET_DEVICE_BASE(LDEV_GPIO, CFG_NS87308_GPIO_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_GPIO)
+	PNP_SET_DEVICE_BASE(LDEV_GPIO, CONFIG_SYS_NS87308_GPIO_BASE);
 #endif
 
-#if (CFG_NS87308_DEVS & CFG_NS87308_POWRMAN)
-#ifndef CFG_NS87308_PWMAN_BASE
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_POWRMAN)
+#ifndef CONFIG_SYS_NS87308_PWMAN_BASE
 	PNP_ACTIVATE_DEVICE(LDEV_POWRMAN);
 #else
-	PNP_SET_DEVICE_BASE(LDEV_POWRMAN, CFG_NS87308_PWMAN_BASE);
+	PNP_SET_DEVICE_BASE(LDEV_POWRMAN, CONFIG_SYS_NS87308_PWMAN_BASE);
 
 	/*
 	 * Enable all units
 	 */
-	write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_FER1, 0x7d);
-	write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_FER2, 0x87);
+	write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER1, 0x7d);
+	write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER2, 0x87);
 
-#ifdef CFG_NS87308_PMC1
-	write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC1, CFG_NS87308_PMC1);
+#ifdef CONFIG_SYS_NS87308_PMC1
+	write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC1, CONFIG_SYS_NS87308_PMC1);
 #endif
 
-#ifdef CFG_NS87308_PMC2
-	write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC2, CFG_NS87308_PMC2);
+#ifdef CONFIG_SYS_NS87308_PMC2
+	write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC2, CONFIG_SYS_NS87308_PMC2);
 #endif
 
-#ifdef CFG_NS87308_PMC3
-	write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC3, CFG_NS87308_PMC3);
+#ifdef CONFIG_SYS_NS87308_PMC3
+	write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC3, CONFIG_SYS_NS87308_PMC3);
 #endif
 #endif
 #endif
 
-#ifdef CFG_NS87308_CS0_BASE
-	PNP_PGCS_CSLINE_BASE(0, CFG_NS87308_CS0_BASE);
-	PNP_PGCS_CSLINE_CONF(0, CFG_NS87308_CS0_CONF);
+#ifdef CONFIG_SYS_NS87308_CS0_BASE
+	PNP_PGCS_CSLINE_BASE(0, CONFIG_SYS_NS87308_CS0_BASE);
+	PNP_PGCS_CSLINE_CONF(0, CONFIG_SYS_NS87308_CS0_CONF);
 #endif
 
-#ifdef CFG_NS87308_CS1_BASE
-	PNP_PGCS_CSLINE_BASE(1, CFG_NS87308_CS1_BASE);
-	PNP_PGCS_CSLINE_CONF(1, CFG_NS87308_CS1_CONF);
+#ifdef CONFIG_SYS_NS87308_CS1_BASE
+	PNP_PGCS_CSLINE_BASE(1, CONFIG_SYS_NS87308_CS1_BASE);
+	PNP_PGCS_CSLINE_CONF(1, CONFIG_SYS_NS87308_CS1_CONF);
 #endif
 
-#ifdef CFG_NS87308_CS2_BASE
-	PNP_PGCS_CSLINE_BASE(2, CFG_NS87308_CS2_BASE);
-	PNP_PGCS_CSLINE_CONF(2, CFG_NS87308_CS2_CONF);
+#ifdef CONFIG_SYS_NS87308_CS2_BASE
+	PNP_PGCS_CSLINE_BASE(2, CONFIG_SYS_NS87308_CS2_BASE);
+	PNP_PGCS_CSLINE_CONF(2, CONFIG_SYS_NS87308_CS2_CONF);
 #endif
 }
diff --git a/drivers/mmc/atmel_mci.c b/drivers/mmc/atmel_mci.c
index a151488..3aa92f2 100644
--- a/drivers/mmc/atmel_mci.c
+++ b/drivers/mmc/atmel_mci.c
@@ -38,16 +38,16 @@
 #define pr_debug(...) do { } while(0)
 #endif
 
-#ifndef CFG_MMC_CLK_OD
-#define CFG_MMC_CLK_OD		150000
+#ifndef CONFIG_SYS_MMC_CLK_OD
+#define CONFIG_SYS_MMC_CLK_OD		150000
 #endif
 
-#ifndef CFG_MMC_CLK_PP
-#define CFG_MMC_CLK_PP		5000000
+#ifndef CONFIG_SYS_MMC_CLK_PP
+#define CONFIG_SYS_MMC_CLK_PP		5000000
 #endif
 
-#ifndef CFG_MMC_OP_COND
-#define CFG_MMC_OP_COND		0x00100000
+#ifndef CONFIG_SYS_MMC_OP_COND
+#define CONFIG_SYS_MMC_OP_COND		0x00100000
 #endif
 
 #define MMC_DEFAULT_BLKLEN	512
@@ -349,7 +349,7 @@ static int sd_init_card(struct mmc_cid *cid, int verbose)
 
 	mmc_idle_cards();
 	for (i = 0; i < 1000; i++) {
-		ret = mmc_acmd(SD_CMD_APP_SEND_OP_COND, CFG_MMC_OP_COND,
+		ret = mmc_acmd(SD_CMD_APP_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND,
 			       resp, R3 | NID);
 		if (ret || (resp[0] & 0x80000000))
 			break;
@@ -385,7 +385,7 @@ static int mmc_init_card(struct mmc_cid *cid, int verbose)
 
 	mmc_idle_cards();
 	for (i = 0; i < 1000; i++) {
-		ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CFG_MMC_OP_COND, resp,
+		ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND, resp,
 			      R3 | NID | OPEN_DRAIN);
 		if (ret || (resp[0] & 0x80000000))
 			break;
@@ -434,7 +434,7 @@ static void mci_set_data_timeout(struct mmc_csd *csd)
 	timeout_clks = csd->nsac * 100;
 
 	timeout_clks += (((timeout_ns + 9) / 10)
-			 * ((CFG_MMC_CLK_PP + 99999) / 100000) + 9999) / 10000;
+			 * ((CONFIG_SYS_MMC_CLK_PP + 99999) / 100000) + 9999) / 10000;
 	if (!mmc_card_is_sd)
 		timeout_clks *= 10;
 	else
@@ -475,7 +475,7 @@ int mmc_init(int verbose)
 	mmci_writel(CR, MMCI_BIT(MCIEN));
 	mmci_writel(DTOR, 0x5f);
 	mmci_writel(IDR, ~0UL);
-	mci_set_mode(CFG_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
+	mci_set_mode(CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
 
 	mmc_card_is_sd = 0;
 
@@ -520,7 +520,7 @@ int mmc_init(int verbose)
 	mmc_blkdev.blksz = 512;
 	mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2));
 
-	mci_set_mode(CFG_MMC_CLK_PP, mmc_blkdev.blksz);
+	mci_set_mode(CONFIG_SYS_MMC_CLK_PP, mmc_blkdev.blksz);
 
 #if 0
 	if (fat_register_device(&mmc_blkdev, 1))
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 7bfdc43..c40bf66 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -57,12 +57,12 @@
  * AMD/Spansion Application Note: Migration from Single-byte to Three-byte
  *   Device IDs, Publication Number 25538 Revision A, November 8, 2001
  *
- * Define CFG_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
+ * Define CONFIG_SYS_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
  * reading and writing ... (yes there is such a Hardware).
  */
 
-#ifndef CFG_FLASH_BANKS_LIST
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#ifndef CONFIG_SYS_FLASH_BANKS_LIST
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 #endif
 
 #define FLASH_CMD_CFI			0x98
@@ -143,7 +143,7 @@
 #define CFI_CMDSET_SST			258
 #define CFI_CMDSET_INTEL_PROG_REGIONS	512
 
-#ifdef CFG_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
+#ifdef CONFIG_SYS_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
 # undef  FLASH_CMD_RESET
 # define FLASH_CMD_RESET	AMD_CMD_RESET /* use AMD-Reset instead */
 #endif
@@ -159,11 +159,11 @@ typedef union {
 
 static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
 
-/* use CFG_MAX_FLASH_BANKS_DETECT if defined */
-#ifdef CFG_MAX_FLASH_BANKS_DETECT
-# define CFI_MAX_FLASH_BANKS	CFG_MAX_FLASH_BANKS_DETECT
+/* use CONFIG_SYS_MAX_FLASH_BANKS_DETECT if defined */
+#ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
+# define CFI_MAX_FLASH_BANKS	CONFIG_SYS_MAX_FLASH_BANKS_DETECT
 #else
-# define CFI_MAX_FLASH_BANKS	CFG_MAX_FLASH_BANKS
+# define CFI_MAX_FLASH_BANKS	CONFIG_SYS_MAX_FLASH_BANKS
 #endif
 
 flash_info_t flash_info[CFI_MAX_FLASH_BANKS];	/* FLASH chips info */
@@ -171,8 +171,8 @@ flash_info_t flash_info[CFI_MAX_FLASH_BANKS];	/* FLASH chips info */
 /*
  * Check if chip width is defined. If not, start detecting with 8bit.
  */
-#ifndef CFG_FLASH_CFI_WIDTH
-#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
+#ifndef CONFIG_SYS_FLASH_CFI_WIDTH
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #endif
 
 typedef unsigned long flash_sect_t;
@@ -255,20 +255,20 @@ u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64")));
 
 /*-----------------------------------------------------------------------
  */
-#if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+#if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
 static flash_info_t *flash_get_info(ulong base)
 {
 	int i;
 	flash_info_t * info = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		info = & flash_info[i];
 		if (info->size && info->start[0] <= base &&
 		    base <= info->start[0] + info->size - 1)
 			break;
 	}
 
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 }
 #endif
 
@@ -309,7 +309,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
 	int i;
 	int cword_offset;
 	int cp_offset;
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 	u32 cmd_le = cpu_to_le32(cmd);
 #endif
 	uchar val;
@@ -317,7 +317,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
 
 	for (i = info->portwidth; i > 0; i--){
 		cword_offset = (info->portwidth-i)%info->chipwidth;
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 		cp_offset = info->portwidth - i;
 		val = *((uchar*)&cmd_le + cword_offset);
 #else
@@ -374,7 +374,7 @@ static inline uchar flash_read_uchar (flash_info_t * info, uint offset)
 	uchar retval;
 
 	cp = flash_map (info, 0, offset);
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 	retval = flash_read8(cp);
 #else
 	retval = flash_read8(cp + info->portwidth - 1);
@@ -419,7 +419,7 @@ static ulong flash_read_long (flash_info_t * info, flash_sect_t sect,
 		debug ("addr[%x] = 0x%x\n", x, flash_read8(addr + x));
 	}
 #endif
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 	retval = ((flash_read8(addr) << 16) |
 		  (flash_read8(addr + info->portwidth) << 24) |
 		  (flash_read8(addr + 2 * info->portwidth)) |
@@ -646,8 +646,8 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector,
 {
 	ulong start;
 
-#if CFG_HZ != 1000
-	tout *= CFG_HZ/1000;
+#if CONFIG_SYS_HZ != 1000
+	tout *= CONFIG_SYS_HZ/1000;
 #endif
 
 	/* Wait for command completion */
@@ -716,7 +716,7 @@ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
  */
 static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
 {
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 	unsigned short	w;
 	unsigned int	l;
 	unsigned long long ll;
@@ -727,7 +727,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
 		cword->c = c;
 		break;
 	case FLASH_CFI_16BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 		w = c;
 		w <<= 8;
 		cword->w = (cword->w >> 8) | w;
@@ -736,7 +736,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
 #endif
 		break;
 	case FLASH_CFI_32BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 		l = c;
 		l <<= 24;
 		cword->l = (cword->l >> 8) | l;
@@ -745,7 +745,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
 #endif
 		break;
 	case FLASH_CFI_64BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
 		ll = c;
 		ll <<= 56;
 		cword->ll = (cword->ll >> 8) | ll;
@@ -850,7 +850,7 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
 					info->write_tout, "write");
 }
 
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
 				  int len)
@@ -1024,7 +1024,7 @@ out_unmap:
 	unmap_physmem(dst, len);
 	return retcode;
 }
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
 
 /*-----------------------------------------------------------------------
@@ -1173,7 +1173,7 @@ void flash_print_info (flash_info_t * info)
 	for (i = 0; i < info->sector_count; ++i) {
 		if ((i % 5) == 0)
 			printf ("\n");
-#ifdef CFG_FLASH_EMPTY_INFO
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
 		int k;
 		int size;
 		int erased;
@@ -1198,7 +1198,7 @@ void flash_print_info (flash_info_t * info)
 			info->start[i],
 			erased ? 'E' : ' ',
 			info->protect[i] ? "RO" : "  ");
-#else	/* ! CFG_FLASH_EMPTY_INFO */
+#else	/* ! CONFIG_SYS_FLASH_EMPTY_INFO */
 		printf ("  %08lX   %s ",
 			info->start[i],
 			info->protect[i] ? "RO" : "  ");
@@ -1242,7 +1242,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	int aln;
 	cfiword_t cword;
 	int i, rc;
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	int buffered_size;
 #endif
 #ifdef CONFIG_FLASH_SHOW_PROGRESS
@@ -1286,7 +1286,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	}
 
 	/* handle the aligned part */
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 	buffered_size = (info->portwidth / info->chipwidth);
 	buffered_size *= info->buffer_size;
 	while (cnt >= info->portwidth) {
@@ -1326,7 +1326,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 		cnt -= info->portwidth;
 		FLASH_SHOW_PROGRESS(scale, dots, digit, info->portwidth);
 	}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
 	if (cnt == 0) {
 		return (0);
@@ -1350,7 +1350,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 
 /*-----------------------------------------------------------------------
  */
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 
 int flash_real_protect (flash_info_t * info, long sector, int prot)
 {
@@ -1457,7 +1457,7 @@ void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset,
 	flash_unmap(info, 0, FLASH_OFFSET_INTEL_PROTECTION, src);
 }
 
-#endif /* CFG_FLASH_PROTECTION */
+#endif /* CONFIG_SYS_FLASH_PROTECTION */
 
 /*-----------------------------------------------------------------------
  * Reverse the order of the erase regions in the CFI QRY structure.
@@ -1501,7 +1501,7 @@ static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry)
 	cmdset_intel_read_jedec_ids(info);
 	flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 	/* read legacy lock/unlock bit from intel flash */
 	if (info->ext_addr) {
 		info->legacy_unlock = flash_read_uchar (info,
@@ -1717,7 +1717,7 @@ static int flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
 {
 	debug ("flash detect cfi\n");
 
-	for (info->portwidth = CFG_FLASH_CFI_WIDTH;
+	for (info->portwidth = CONFIG_SYS_FLASH_CFI_WIDTH;
 	     info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) {
 		for (info->chipwidth = FLASH_CFI_BY8;
 		     info->chipwidth <= info->portwidth;
@@ -1793,7 +1793,7 @@ ulong flash_get_size (ulong base, int banknum)
 
 	info->ext_addr = 0;
 	info->cfi_version = 0;
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 	info->legacy_unlock = 0;
 #endif
 
@@ -1882,7 +1882,7 @@ ulong flash_get_size (ulong base, int banknum)
 			debug ("erase_region_count = %d erase_region_size = %d\n",
 				erase_region_count, erase_region_size);
 			for (j = 0; j < erase_region_count; j++) {
-				if (sect_cnt >= CFG_MAX_FLASH_SECT) {
+				if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
 					printf("ERROR: too many flash sectors\n");
 					break;
 				}
@@ -1947,41 +1947,41 @@ unsigned long flash_init (void)
 {
 	unsigned long size = 0;
 	int i;
-#if defined(CFG_FLASH_AUTOPROTECT_LIST)
+#if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST)
 	struct apl_s {
 		ulong start;
 		ulong size;
-	} apl[] = CFG_FLASH_AUTOPROTECT_LIST;
+	} apl[] = CONFIG_SYS_FLASH_AUTOPROTECT_LIST;
 #endif
 
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 	char *s = getenv("unlock");
 #endif
 
-#define BANK_BASE(i)	(((unsigned long [CFI_MAX_FLASH_BANKS])CFG_FLASH_BANKS_LIST)[i])
+#define BANK_BASE(i)	(((unsigned long [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 		if (!flash_detect_legacy (BANK_BASE(i), i))
 			flash_get_size (BANK_BASE(i), i);
 		size += flash_info[i].size;
 		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-#ifndef CFG_FLASH_QUIET_TEST
+#ifndef CONFIG_SYS_FLASH_QUIET_TEST
 			printf ("## Unknown FLASH on Bank %d "
 				"- Size = 0x%08lx = %ld MB\n",
 				i+1, flash_info[i].size,
 				flash_info[i].size << 20);
-#endif /* CFG_FLASH_QUIET_TEST */
+#endif /* CONFIG_SYS_FLASH_QUIET_TEST */
 		}
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 		else if ((s != NULL) && (strcmp(s, "yes") == 0)) {
 			/*
 			 * Only the U-Boot image and it's environment
 			 * is protected, all other sectors are
 			 * unprotected (unlocked) if flash hardware
-			 * protection is used (CFG_FLASH_PROTECTION)
+			 * protection is used (CONFIG_SYS_FLASH_PROTECTION)
 			 * and the environment variable "unlock" is
 			 * set to "yes".
 			 */
@@ -2022,15 +2022,15 @@ unsigned long flash_init (void)
 					       &flash_info[i]);
 			}
 		}
-#endif /* CFG_FLASH_PROTECTION */
+#endif /* CONFIG_SYS_FLASH_PROTECTION */
 	}
 
 	/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + monitor_flash_len  - 1,
-		       flash_get_info(CFG_MONITOR_BASE));
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len  - 1,
+		       flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
 	/* Environment protection ON by default */
@@ -2049,7 +2049,7 @@ unsigned long flash_init (void)
 		       flash_get_info(CONFIG_ENV_ADDR_REDUND));
 #endif
 
-#if defined(CFG_FLASH_AUTOPROTECT_LIST)
+#if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST)
 	for (i = 0; i < (sizeof(apl) / sizeof(struct apl_s)); i++) {
 		debug("autoprotecting from %08x to %08x\n",
 		      apl[i].start, apl[i].start + apl[i].size - 1);
diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c
index 049da69..201e518 100644
--- a/drivers/mtd/dataflash.c
+++ b/drivers/mtd/dataflash.c
@@ -40,12 +40,12 @@ int AT91F_DataflashInit (void)
 	int dfcode;
 	int part;
 	int last_part;
-	int found[CFG_MAX_DATAFLASH_BANKS];
+	int found[CONFIG_SYS_MAX_DATAFLASH_BANKS];
 	unsigned char protected;
 
 	AT91F_SpiInit ();
 
-	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
 		found[i] = 0;
 		dataflash_info[i].Desc.state = IDLE;
 		dataflash_info[i].id = 0;
@@ -179,7 +179,7 @@ void AT91F_DataflashSetEnv (void)
 	unsigned char s[32];	/* Will fit a long int in hex */
 	unsigned long start;
 
-	for (i = 0, part= 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+	for (i = 0, part= 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
 		for(j = 0; j<NB_DATAFLASH_AREA; j++) {
 			env = area_list[part].setenv;
 			/* Set the environment according to the label...*/
@@ -198,7 +198,7 @@ void dataflash_print_info (void)
 {
 	int i, j;
 
-	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
 		if (dataflash_info[i].id != 0) {
 			printf("DataFlash:");
 			switch (dataflash_info[i].id) {
@@ -258,7 +258,7 @@ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash,
 	char addr_valid = 0;
 	int i;
 
-	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++)
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++)
 		if ( dataflash_info[i].id
 			&& ((((int) *addr) & 0xFF000000) ==
 			dataflash_info[i].logical_address)) {
@@ -284,7 +284,7 @@ int addr_dataflash (unsigned long addr)
 	int addr_valid = 0;
 	int i;
 
-	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
 		if ((((int) addr) & 0xFF000000) ==
 			dataflash_info[i].logical_address) {
 			addr_valid = 1;
@@ -349,7 +349,7 @@ int dataflash_real_protect (int flag, unsigned long start_addr,
 	int i,j, area1, area2, addr_valid = 0;
 
 	/* find dataflash */
-	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
 		if ((((int) start_addr) & 0xF0000000) ==
 			dataflash_info[i].logical_address) {
 				addr_valid = 1;
diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c
index 020647a..226e1e4 100644
--- a/drivers/mtd/jedec_flash.c
+++ b/drivers/mtd/jedec_flash.c
@@ -170,7 +170,7 @@ struct amd_flash_info {
 #define SIZE_8MiB   23
 
 static const struct amd_flash_info jedec_table[] = {
-#ifdef CFG_FLASH_LEGACY_256Kx8
+#ifdef CONFIG_SYS_FLASH_LEGACY_256Kx8
 	{
 		.mfr_id		= MANUFACTURER_SST,
 		.dev_id		= SST39LF020,
@@ -186,7 +186,7 @@ static const struct amd_flash_info jedec_table[] = {
 		}
 	},
 #endif
-#ifdef CFG_FLASH_LEGACY_512Kx8
+#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx8
 	{
 		.mfr_id		= MANUFACTURER_AMD,
 		.dev_id		= AM29LV040B,
@@ -216,7 +216,7 @@ static const struct amd_flash_info jedec_table[] = {
 		}
 	},
 #endif
-#ifdef CFG_FLASH_LEGACY_512Kx16
+#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx16
 	{
 		.mfr_id		= MANUFACTURER_AMD,
 		.dev_id		= AM29LV400BB,
@@ -307,7 +307,7 @@ static inline void fill_info(flash_info_t *info, const struct amd_flash_info *je
 		debug ("erase_region_count = %d erase_region_size = %d\n",
 		       erase_region_count, erase_region_size);
 		for (j = 0; j < erase_region_count; j++) {
-			if (sect_cnt >= CFG_MAX_FLASH_SECT) {
+			if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
 				printf("ERROR: too many flash sectors\n");
 				break;
 			}
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 4351824..7dda6c4 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -693,7 +693,7 @@ static struct fsl_elbc_ctrl *elbc_ctrl;
 
 static void fsl_elbc_ctrl_init(void)
 {
-	immap_t *im = (immap_t *)CFG_IMMR;
+	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
 	elbc_ctrl = kzalloc(sizeof(*elbc_ctrl), GFP_KERNEL);
 	if (!elbc_ctrl)
diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/nand.c
index 71a0e4b..eeb19ff 100644
--- a/drivers/mtd/nand/nand.c
+++ b/drivers/mtd/nand/nand.c
@@ -24,15 +24,15 @@
 #include <common.h>
 #include <nand.h>
 
-#ifndef CFG_NAND_BASE_LIST
-#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
+#ifndef CONFIG_SYS_NAND_BASE_LIST
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
 #endif
 
 int nand_curr_device = -1;
-nand_info_t nand_info[CFG_MAX_NAND_DEVICE];
+nand_info_t nand_info[CONFIG_SYS_MAX_NAND_DEVICE];
 
-static struct nand_chip nand_chip[CFG_MAX_NAND_DEVICE];
-static ulong base_address[CFG_MAX_NAND_DEVICE] = CFG_NAND_BASE_LIST;
+static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
+static ulong base_address[CONFIG_SYS_MAX_NAND_DEVICE] = CONFIG_SYS_NAND_BASE_LIST;
 
 static const char default_nand_name[] = "nand";
 
@@ -61,7 +61,7 @@ void nand_init(void)
 {
 	int i;
 	unsigned int size = 0;
-	for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
 		nand_init_chip(&nand_info[i], &nand_chip[i], base_address[i]);
 		size += nand_info[i].size / 1024;
 		if (nand_curr_device == -1)
@@ -69,7 +69,7 @@ void nand_init(void)
 	}
 	printf("%u MiB\n", size / 1024);
 
-#ifdef CFG_NAND_SELECT_DEVICE
+#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
 	/*
 	 * Select the chip in the board/cpu specific driver
 	 */
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 0913bb8..fe34a48 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -492,7 +492,7 @@ EXPORT_SYMBOL_GPL(nand_wait_ready);
 void nand_wait_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
-	u32 timeo = (CFG_HZ * 20) / 1000;
+	u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
 
 	reset_timer();
 
@@ -831,9 +831,9 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
 	int state = this->state;
 
 	if (state == FL_ERASING)
-		timeo = (CFG_HZ * 400) / 1000;
+		timeo = (CONFIG_SYS_HZ * 400) / 1000;
 	else
-		timeo = (CFG_HZ * 20) / 1000;
+		timeo = (CONFIG_SYS_HZ * 20) / 1000;
 
 	if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
 		this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c
index 159fe76..edaf55a 100644
--- a/drivers/mtd/nand/s3c64xx.c
+++ b/drivers/mtd/nand/s3c64xx.c
@@ -141,7 +141,7 @@ static int s3c_nand_device_ready(struct mtd_info *mtdinfo)
 	return !!(readl(NFSTAT) & NFSTAT_RnB);
 }
 
-#ifdef CFG_S3C_NAND_HWECC
+#ifdef CONFIG_SYS_S3C_NAND_HWECC
 /*
  * This function is called before encoding ecc codes to ready ecc engine.
  * Written by jsgood
@@ -256,7 +256,7 @@ static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 
 	return ret;
 }
-#endif /* CFG_S3C_NAND_HWECC */
+#endif /* CONFIG_SYS_S3C_NAND_HWECC */
 
 /*
  * Board-specific NAND initialization. The following members of the
@@ -297,7 +297,7 @@ int board_nand_init(struct nand_chip *nand)
 	nand->read_buf		= nand_read_buf;
 #endif
 
-#ifdef CFG_S3C_NAND_HWECC
+#ifdef CONFIG_SYS_S3C_NAND_HWECC
 	nand->ecc.hwctl		= s3c_nand_enable_hwecc;
 	nand->ecc.calculate	= s3c_nand_calculate_ecc;
 	nand->ecc.correct	= s3c_nand_correct_data;
@@ -307,11 +307,11 @@ int board_nand_init(struct nand_chip *nand)
 	 * board one day, it will get more complicated...
 	 */
 	nand->ecc.mode		= NAND_ECC_HW;
-	nand->ecc.size		= CFG_NAND_ECCSIZE;
-	nand->ecc.bytes		= CFG_NAND_ECCBYTES;
+	nand->ecc.size		= CONFIG_SYS_NAND_ECCSIZE;
+	nand->ecc.bytes		= CONFIG_SYS_NAND_ECCBYTES;
 #else
 	nand->ecc.mode		= NAND_ECC_SOFT;
-#endif /* ! CFG_S3C_NAND_HWECC */
+#endif /* ! CONFIG_SYS_S3C_NAND_HWECC */
 
 	nand->priv		= nand_cs + chip_n++;
 
diff --git a/drivers/mtd/nand_legacy/nand_legacy.c b/drivers/mtd/nand_legacy/nand_legacy.c
index bf5565a..407e901 100644
--- a/drivers/mtd/nand_legacy/nand_legacy.c
+++ b/drivers/mtd/nand_legacy/nand_legacy.c
@@ -66,7 +66,7 @@ struct nand_oob_config {
 	int eccvalid_pos;
 } oob_config = { {0}, 0, 0};
 
-struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE] = {{0}};
+struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE] = {{0}};
 
 int curr_device = -1; /* Current NAND Device */
 
@@ -982,7 +982,7 @@ static int nand_write_ecc (struct nand_chip* nand, size_t to, size_t len,
 #ifdef CONFIG_OMAP1510
 	archflashwp(0,0);
 #endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
 	NAND_WP_OFF();
 #endif
 
@@ -1036,7 +1036,7 @@ out:
 #ifdef CONFIG_OMAP1510
 	archflashwp(0,1);
 #endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
 	NAND_WP_ON();
 #endif
 
@@ -1235,7 +1235,7 @@ int nand_legacy_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean)
 #ifdef CONFIG_OMAP1510
 	archflashwp(0,0);
 #endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
 	NAND_WP_OFF();
 #endif
     NAND_ENABLE_CE(nand);  /* set pin low */
@@ -1321,7 +1321,7 @@ out:
 #ifdef CONFIG_OMAP1510
 	archflashwp(0,1);
 #endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
 	NAND_WP_ON();
 #endif
 
@@ -1358,7 +1358,7 @@ unsigned long nand_probe(unsigned long physadr)
 #endif
 	oob_config.badblock_pos = 5;
 
-	for (i=0; i<CFG_MAX_NAND_DEVICE; i++) {
+	for (i=0; i<CONFIG_SYS_MAX_NAND_DEVICE; i++) {
 		if (nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN) {
 			nand = &nand_dev_desc[i];
 			break;
diff --git a/drivers/mtd/onenand/onenand_uboot.c b/drivers/mtd/onenand/onenand_uboot.c
index d614450..08082f3 100644
--- a/drivers/mtd/onenand/onenand_uboot.c
+++ b/drivers/mtd/onenand/onenand_uboot.c
@@ -26,7 +26,7 @@ void onenand_init(void)
 	memset(&onenand_mtd, 0, sizeof(struct mtd_info));
 	memset(&onenand_chip, 0, sizeof(struct onenand_chip));
 
-	onenand_chip.base = (void *) CFG_ONENAND_BASE;
+	onenand_chip.base = (void *) CONFIG_SYS_ONENAND_BASE;
 	onenand_mtd.priv = &onenand_chip;
 
 	onenand_scan(&onenand_mtd, 1);
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index e5f758e..75f5900 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -5,9 +5,9 @@
  */
 
 /* Common parameters */
-#define SPI_FLASH_PROG_TIMEOUT		((10 * CFG_HZ) / 1000)
-#define SPI_FLASH_PAGE_ERASE_TIMEOUT	((50 * CFG_HZ) / 1000)
-#define SPI_FLASH_SECTOR_ERASE_TIMEOUT	(10 * CFG_HZ)
+#define SPI_FLASH_PROG_TIMEOUT		((10 * CONFIG_SYS_HZ) / 1000)
+#define SPI_FLASH_PAGE_ERASE_TIMEOUT	((50 * CONFIG_SYS_HZ) / 1000)
+#define SPI_FLASH_SECTOR_ERASE_TIMEOUT	(10 * CONFIG_SYS_HZ)
 
 /* Common commands */
 #define CMD_READ_ID			0x9f
diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c
index c999b12..b8b835a 100644
--- a/drivers/mtd/spi/stmicro.c
+++ b/drivers/mtd/spi/stmicro.c
@@ -295,7 +295,7 @@ int stmicro_erase(struct spi_flash *flash, u32 offset, size_t len)
 		}
 
 		/* Up to 2 seconds */
-		ret = stmicro_wait_ready(flash, 2 * CFG_HZ);
+		ret = stmicro_wait_ready(flash, 2 * CONFIG_SYS_HZ);
 		if (ret < 0) {
 			debug("SF: STMicro page erase timed out\n");
 			break;
diff --git a/drivers/net/bcm570x.c b/drivers/net/bcm570x.c
index 6b28b95..185764e 100644
--- a/drivers/net/bcm570x.c
+++ b/drivers/net/bcm570x.c
@@ -439,9 +439,9 @@ int eth_init (bd_t * bis)
 	/* Setup timer delays */
 	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
 		pDevice->UseTaggedStatus = TRUE;
-		pUmDevice->timer_interval = CFG_HZ;
+		pUmDevice->timer_interval = CONFIG_SYS_HZ;
 	} else {
-		pUmDevice->timer_interval = CFG_HZ / 50;
+		pUmDevice->timer_interval = CONFIG_SYS_HZ / 50;
 	}
 
 	/* Grab name .... */
@@ -458,15 +458,15 @@ int eth_init (bd_t * bis)
 	pUmDevice->rx_last_cnt = pUmDevice->tx_last_cnt = 0;
 
 	/* delay for 4 seconds */
-	pUmDevice->delayed_link_ind = (4 * CFG_HZ) / pUmDevice->timer_interval;
+	pUmDevice->delayed_link_ind = (4 * CONFIG_SYS_HZ) / pUmDevice->timer_interval;
 
-	pUmDevice->adaptive_expiry = CFG_HZ / pUmDevice->timer_interval;
+	pUmDevice->adaptive_expiry = CONFIG_SYS_HZ / pUmDevice->timer_interval;
 
 	/* Sometimes we get spurious ints. after reset when link is down. */
 	/* This field tells the isr to service the int. even if there is */
 	/* no status block update. */
 	pUmDevice->adapter_just_inited =
-	    (3 * CFG_HZ) / pUmDevice->timer_interval;
+	    (3 * CONFIG_SYS_HZ) / pUmDevice->timer_interval;
 
 	/* Initialize 570x */
 	if (LM_InitializeAdapter (pDevice) != LM_STATUS_SUCCESS) {
@@ -1046,9 +1046,9 @@ LM_STATUS MM_GetConfig (PLM_DEVICE_BLOCK pDevice)
 
 	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
 		pDevice->UseTaggedStatus = TRUE;
-		pUmDevice->timer_interval = CFG_HZ;
+		pUmDevice->timer_interval = CONFIG_SYS_HZ;
 	} else {
-		pUmDevice->timer_interval = CFG_HZ / 50;
+		pUmDevice->timer_interval = CONFIG_SYS_HZ / 50;
 	}
 
 	pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index];
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c5e74b8..504fd10 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -466,7 +466,7 @@ ADI_ETHER_BUFFER *SetupTxBuffer(int no)
 	return buf;
 }
 
-#if defined(CONFIG_POST) && defined(CFG_POST_ETHER)
+#if defined(CONFIG_POST) && defined(CONFIG_SYS_POST_ETHER)
 int ether_post_test(int flags)
 {
 	uchar buf[64];
diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
index ae1983a..35a9baf 100644
--- a/drivers/net/cs8900.c
+++ b/drivers/net/cs8900.c
@@ -90,7 +90,7 @@ static void eth_reset (void)
 	udelay (200000);
 	/* Wait until the chip is reset */
 
-	tmo = get_timer (0) + 1 * CFG_HZ;
+	tmo = get_timer (0) + 1 * CONFIG_SYS_HZ;
 	while ((((us = get_reg_init_bus (PP_SelfSTAT)) & PP_SelfSTAT_InitD) == 0)
 		   && tmo < get_timer (0))
 		/*NOP*/;
@@ -244,7 +244,7 @@ retry:
 #ifdef DEBUG
 		printf ("cs: unable to send packet; retrying...\n");
 #endif
-		for (tmo = get_timer (0) + 5 * CFG_HZ; get_timer (0) < tmo;)
+		for (tmo = get_timer (0) + 5 * CONFIG_SYS_HZ; get_timer (0) < tmo;)
 			/*NOP*/;
 		eth_reset ();
 		eth_reginit ();
@@ -257,7 +257,7 @@ retry:
 		CS8900_RTDATA = *addr++;
 
 	/* wait for transfer to succeed */
-	tmo = get_timer (0) + 5 * CFG_HZ;
+	tmo = get_timer (0) + 5 * CONFIG_SYS_HZ;
 	while ((s = get_reg (PP_TER) & ~0x1F) == 0) {
 		if (get_timer (0) >= tmo)
 			break;
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 3a61b80..ffb739d 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -447,7 +447,7 @@ eth_send(volatile void *packet, int length)
 	DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
 
 	/* wait for end of transmission */
-	tmo = get_timer(0) + 5 * CFG_HZ;
+	tmo = get_timer(0) + 5 * CONFIG_SYS_HZ;
 	while ( !(DM9000_ior(DM9000_NSR) & (NSR_TX1END | NSR_TX2END)) ||
 		!(DM9000_ior(DM9000_ISR) & IMR_PTM) ) {
 		if (get_timer(0) >= tmo) {
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index d6539c0..9c06b25 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -194,14 +194,14 @@ struct descriptor {			/* A generic descriptor. */
 	unsigned char params[0];
 };
 
-#define CFG_CMD_EL		0x8000
-#define CFG_CMD_SUSPEND		0x4000
-#define CFG_CMD_INT		0x2000
-#define CFG_CMD_IAS		0x0001	/* individual address setup */
-#define CFG_CMD_CONFIGURE	0x0002	/* configure */
+#define CONFIG_SYS_CMD_EL		0x8000
+#define CONFIG_SYS_CMD_SUSPEND		0x4000
+#define CONFIG_SYS_CMD_INT		0x2000
+#define CONFIG_SYS_CMD_IAS		0x0001	/* individual address setup */
+#define CONFIG_SYS_CMD_CONFIGURE	0x0002	/* configure */
 
-#define CFG_STATUS_C		0x8000
-#define CFG_STATUS_OK		0x2000
+#define CONFIG_SYS_STATUS_C		0x8000
+#define CONFIG_SYS_STATUS_OK		0x2000
 
 	/* Misc.
 	 */
@@ -529,7 +529,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	tx_next = ((tx_next + 1) % NUM_TX_DESC);
 
 	cfg_cmd = (struct descriptor *) &tx_ring[tx_cur];
-	cfg_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_CONFIGURE));
+	cfg_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_CONFIGURE));
 	cfg_cmd->status = 0;
 	cfg_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
 
@@ -537,7 +537,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 			sizeof (i82558_config_cmd));
 
 	if (!wait_for_eepro100 (dev)) {
-		printf ("Error---CFG_CMD_CONFIGURE: Can not reset ethernet controller.\n");
+		printf ("Error---CONFIG_SYS_CMD_CONFIGURE: Can not reset ethernet controller.\n");
 		goto Done;
 	}
 
@@ -545,7 +545,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	OUTW (dev, SCB_M | CU_START, SCBCmd);
 
 	for (i = 0;
-	     !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+	     !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
 	     i++) {
 		if (i >= TOUT_LOOP) {
 			printf ("%s: Tx error buffer not ready\n", dev->name);
@@ -553,7 +553,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 		}
 	}
 
-	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
 		printf ("TX error status = 0x%08X\n",
 			le16_to_cpu (tx_ring[tx_cur].status));
 		goto Done;
@@ -565,7 +565,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	tx_next = ((tx_next + 1) % NUM_TX_DESC);
 
 	ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
-	ias_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_IAS));
+	ias_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_IAS));
 	ias_cmd->status = 0;
 	ias_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
 
@@ -581,7 +581,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 	OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
 	OUTW (dev, SCB_M | CU_START, SCBCmd);
 
-	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
 		 i++) {
 		if (i >= TOUT_LOOP) {
 			printf ("%s: Tx error buffer not ready\n",
@@ -590,7 +590,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
 		}
 	}
 
-	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
 		printf ("TX error status = 0x%08X\n",
 			le16_to_cpu (tx_ring[tx_cur].status));
 		goto Done;
@@ -640,7 +640,7 @@ static int eepro100_send (struct eth_device *dev, volatile void *packet, int len
 	OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
 	OUTW (dev, SCB_M | CU_START, SCBCmd);
 
-	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+	for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
 		 i++) {
 		if (i >= TOUT_LOOP) {
 			printf ("%s: Tx error buffer not ready\n", dev->name);
@@ -648,7 +648,7 @@ static int eepro100_send (struct eth_device *dev, volatile void *packet, int len
 		}
 	}
 
-	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+	if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
 		printf ("TX error status = 0x%08X\n",
 			le16_to_cpu (tx_ring[tx_cur].status));
 		goto Done;
diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c
index 59524a5..d056010 100644
--- a/drivers/net/fsl_mcdmafec.c
+++ b/drivers/net/fsl_mcdmafec.c
@@ -56,12 +56,12 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 struct fec_info_dma fec_info[] = {
-#ifdef CFG_FEC0_IOBASE
+#ifdef CONFIG_SYS_FEC0_IOBASE
 	{
 	 0,			/* index */
-	 CFG_FEC0_IOBASE,	/* io base */
-	 CFG_FEC0_PINMUX,	/* gpio pin muxing */
-	 CFG_FEC0_MIIBASE,	/* mii base */
+	 CONFIG_SYS_FEC0_IOBASE,	/* io base */
+	 CONFIG_SYS_FEC0_PINMUX,	/* gpio pin muxing */
+	 CONFIG_SYS_FEC0_MIIBASE,	/* mii base */
 	 -1,			/* phy_addr */
 	 0,			/* duplex and speed */
 	 0,			/* phy name */
@@ -83,17 +83,17 @@ struct fec_info_dma fec_info[] = {
 	 0,			/* cleanTbdNum */
 	 },
 #endif
-#ifdef CFG_FEC1_IOBASE
+#ifdef CONFIG_SYS_FEC1_IOBASE
 	{
 	 1,			/* index */
-	 CFG_FEC1_IOBASE,	/* io base */
-	 CFG_FEC1_PINMUX,	/* gpio pin muxing */
-	 CFG_FEC1_MIIBASE,	/* mii base */
+	 CONFIG_SYS_FEC1_IOBASE,	/* io base */
+	 CONFIG_SYS_FEC1_PINMUX,	/* gpio pin muxing */
+	 CONFIG_SYS_FEC1_MIIBASE,	/* mii base */
 	 -1,			/* phy_addr */
 	 0,			/* duplex and speed */
 	 0,			/* phy name */
 	 0,			/* phy name init */
-#ifdef CFG_DMA_USE_INTSRAM
+#ifdef CONFIG_SYS_DMA_USE_INTSRAM
 	 (cbd_t *)DBUF_LENGTH,	/* RX BD */
 #else
 	 0,			/* RX BD */
@@ -203,7 +203,7 @@ static int fec_send(struct eth_device *dev, volatile void *packet, int length)
 	miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus);
 
 	/* process all the consumed TBDs */
-	while (info->cleanTbdNum < CFG_TX_ETH_BUFFER) {
+	while (info->cleanTbdNum < CONFIG_SYS_TX_ETH_BUFFER) {
 		pUsedTbd = &info->txbd[info->usedTbdIdx];
 		if (pUsedTbd->cbd_sc & BD_ENET_TX_READY) {
 #ifdef ET_DEBUG
@@ -214,14 +214,14 @@ static int fec_send(struct eth_device *dev, volatile void *packet, int length)
 		}
 
 		/* clean this buffer descriptor */
-		if (info->usedTbdIdx == (CFG_TX_ETH_BUFFER - 1))
+		if (info->usedTbdIdx == (CONFIG_SYS_TX_ETH_BUFFER - 1))
 			pUsedTbd->cbd_sc = BD_ENET_TX_WRAP;
 		else
 			pUsedTbd->cbd_sc = 0;
 
 		/* update some indeces for a correct handling of the TBD ring */
 		info->cleanTbdNum++;
-		info->usedTbdIdx = (info->usedTbdIdx + 1) % CFG_TX_ETH_BUFFER;
+		info->usedTbdIdx = (info->usedTbdIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
 	}
 
 	/* Check for valid length of data. */
@@ -240,7 +240,7 @@ static int fec_send(struct eth_device *dev, volatile void *packet, int length)
 	pTbd->cbd_datlen = length;
 	pTbd->cbd_bufaddr = (u32) packet;
 	pTbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY;
-	info->txIdx = (info->txIdx + 1) % CFG_TX_ETH_BUFFER;
+	info->txIdx = (info->txIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
 
 	/* Enable DMA transmit task */
 	MCD_continDma(info->txTask);
@@ -379,15 +379,15 @@ static int fec_init(struct eth_device *dev, bd_t * bd)
 	fec_halt(dev);
 
 #if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
-	defined (CFG_DISCOVER_PHY)
+	defined (CONFIG_SYS_DISCOVER_PHY)
 
 	mii_init();
 
 	set_fec_duplex_speed(fecp, bd, info->dup_spd);
 #else
-#ifndef CFG_DISCOVER_PHY
+#ifndef CONFIG_SYS_DISCOVER_PHY
 	set_fec_duplex_speed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
-#endif				/* ifndef CFG_DISCOVER_PHY */
+#endif				/* ifndef CONFIG_SYS_DISCOVER_PHY */
 #endif				/* CONFIG_CMD_MII || CONFIG_MII */
 
 	/* We use strictly polling mode only */
@@ -397,7 +397,7 @@ static int fec_init(struct eth_device *dev, bd_t * bd)
 	fecp->eir = 0xffffffff;
 
 	/* Set station address   */
-	if ((u32) fecp == CFG_FEC0_IOBASE) {
+	if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) {
 		fec_set_hwaddr(fecp, bd->bi_enetaddr);
 	} else {
 		fec_set_hwaddr(fecp, bd->bi_enet1addr);
@@ -421,15 +421,15 @@ static int fec_init(struct eth_device *dev, bd_t * bd)
 
 	/* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
 	 * Settings:    Last, Tx CRC */
-	for (i = 0; i < CFG_TX_ETH_BUFFER; i++) {
+	for (i = 0; i < CONFIG_SYS_TX_ETH_BUFFER; i++) {
 		info->txbd[i].cbd_sc = 0;
 		info->txbd[i].cbd_datlen = 0;
 		info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
 	}
-	info->txbd[CFG_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
+	info->txbd[CONFIG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
 
 	info->usedTbdIdx = 0;
-	info->cleanTbdNum = CFG_TX_ETH_BUFFER;
+	info->cleanTbdNum = CONFIG_SYS_TX_ETH_BUFFER;
 
 	/* Set Rx FIFO alarm and granularity value */
 	fecp->rfcr = 0x0c000000;
@@ -516,14 +516,14 @@ int mcdmafec_initialize(bd_t * bis)
 {
 	struct eth_device *dev;
 	int i;
-#ifdef CFG_DMA_USE_INTSRAM
-	u32 tmp = CFG_INTSRAM + 0x2000;
+#ifdef CONFIG_SYS_DMA_USE_INTSRAM
+	u32 tmp = CONFIG_SYS_INTSRAM + 0x2000;
 #endif
 
 	for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) {
 
 		dev =
-		    (struct eth_device *)memalign(CFG_CACHELINE_SIZE,
+		    (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
 						  sizeof *dev);
 		if (dev == NULL)
 			hang();
@@ -539,7 +539,7 @@ int mcdmafec_initialize(bd_t * bis)
 		dev->recv = fec_recv;
 
 		/* setup Receive and Transmit buffer descriptor */
-#ifdef CFG_DMA_USE_INTSRAM
+#ifdef CONFIG_SYS_DMA_USE_INTSRAM
 		fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
 		tmp = (u32)fec_info[i].rxbd;
 		fec_info[i].txbd =
@@ -548,17 +548,17 @@ int mcdmafec_initialize(bd_t * bis)
 		tmp = (u32)fec_info[i].txbd;
 		fec_info[i].txbuf =
 		    (char *)((u32)fec_info[i].txbuf + tmp +
-		    (CFG_TX_ETH_BUFFER * sizeof(cbd_t)));
+		    (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
 		tmp = (u32)fec_info[i].txbuf;
 #else
 		fec_info[i].rxbd =
-		    (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
 				       (PKTBUFSRX * sizeof(cbd_t)));
 		fec_info[i].txbd =
-		    (cbd_t *) memalign(CFG_CACHELINE_SIZE,
-				       (CFG_TX_ETH_BUFFER * sizeof(cbd_t)));
+		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
+				       (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
 		fec_info[i].txbuf =
-		    (char *)memalign(CFG_CACHELINE_SIZE, DBUF_LENGTH);
+		    (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
 #endif
 
 #ifdef ET_DEBUG
@@ -566,7 +566,7 @@ int mcdmafec_initialize(bd_t * bis)
 		       (int)fec_info[i].rxbd, (int)fec_info[i].txbd);
 #endif
 
-		fec_info[i].phy_name = (char *)memalign(CFG_CACHELINE_SIZE, 32);
+		fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
 
 		eth_register(dev);
 
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index c23a400..318bdf4 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -267,7 +267,7 @@ static void smc_shutdown (void);
 
 static int poll4int (byte mask, int timeout)
 {
-	int tmo = get_timer (0) + timeout * CFG_HZ;
+	int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ;
 	int is_timeout = 0;
 	word old_bank = SMC_inw (LAN91C96_BANK_SELECT);
 
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 08bebf7..98e8c73 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -28,7 +28,7 @@
  * allocate our own, but we need one such buffer in case a packet
  * wraps around the DMA ring so that we have to copy it.
  *
- * Therefore, define CFG_RX_ETH_BUFFER to 1 in the board-specific
+ * Therefore, define CONFIG_SYS_RX_ETH_BUFFER to 1 in the board-specific
  * configuration header.  This way, the core allocates one RX buffer
  * and one TX buffer, each of which can hold a ethernet packet of
  * maximum size.
@@ -52,11 +52,11 @@
 
 #define barrier() asm volatile("" ::: "memory")
 
-#define CFG_MACB_RX_BUFFER_SIZE		4096
-#define CFG_MACB_RX_RING_SIZE		(CFG_MACB_RX_BUFFER_SIZE / 128)
-#define CFG_MACB_TX_RING_SIZE		16
-#define CFG_MACB_TX_TIMEOUT		1000
-#define CFG_MACB_AUTONEG_TIMEOUT	5000000
+#define CONFIG_SYS_MACB_RX_BUFFER_SIZE		4096
+#define CONFIG_SYS_MACB_RX_RING_SIZE		(CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128)
+#define CONFIG_SYS_MACB_TX_RING_SIZE		16
+#define CONFIG_SYS_MACB_TX_TIMEOUT		1000
+#define CONFIG_SYS_MACB_AUTONEG_TIMEOUT	5000000
 
 struct macb_dma_desc {
 	u32	addr;
@@ -178,7 +178,7 @@ static int macb_send(struct eth_device *netdev, volatile void *packet,
 
 	ctrl = length & TXBUF_FRMLEN_MASK;
 	ctrl |= TXBUF_FRAME_END;
-	if (tx_head == (CFG_MACB_TX_RING_SIZE - 1)) {
+	if (tx_head == (CONFIG_SYS_MACB_TX_RING_SIZE - 1)) {
 		ctrl |= TXBUF_WRAP;
 		macb->tx_head = 0;
 	} else
@@ -193,7 +193,7 @@ static int macb_send(struct eth_device *netdev, volatile void *packet,
 	 * I guess this is necessary because the networking core may
 	 * re-use the transmit buffer as soon as we return...
 	 */
-	for (i = 0; i <= CFG_MACB_TX_TIMEOUT; i++) {
+	for (i = 0; i <= CONFIG_SYS_MACB_TX_TIMEOUT; i++) {
 		barrier();
 		ctrl = macb->tx_ring[tx_head].ctrl;
 		if (ctrl & TXBUF_USED)
@@ -203,7 +203,7 @@ static int macb_send(struct eth_device *netdev, volatile void *packet,
 
 	dma_unmap_single(packet, length, paddr);
 
-	if (i <= CFG_MACB_TX_TIMEOUT) {
+	if (i <= CONFIG_SYS_MACB_TX_TIMEOUT) {
 		if (ctrl & TXBUF_UNDERRUN)
 			printf("%s: TX underrun\n", netdev->name);
 		if (ctrl & TXBUF_EXHAUSTED)
@@ -226,7 +226,7 @@ static void reclaim_rx_buffers(struct macb_device *macb,
 	while (i > new_tail) {
 		macb->rx_ring[i].addr &= ~RXADDR_USED;
 		i++;
-		if (i > CFG_MACB_RX_RING_SIZE)
+		if (i > CONFIG_SYS_MACB_RX_RING_SIZE)
 			i = 0;
 	}
 
@@ -265,7 +265,7 @@ static int macb_recv(struct eth_device *netdev)
 			if (wrapped) {
 				unsigned int headlen, taillen;
 
-				headlen = 128 * (CFG_MACB_RX_RING_SIZE
+				headlen = 128 * (CONFIG_SYS_MACB_RX_RING_SIZE
 						 - macb->rx_tail);
 				taillen = length - headlen;
 				memcpy((void *)NetRxPackets[0],
@@ -276,11 +276,11 @@ static int macb_recv(struct eth_device *netdev)
 			}
 
 			NetReceive(buffer, length);
-			if (++rx_tail >= CFG_MACB_RX_RING_SIZE)
+			if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE)
 				rx_tail = 0;
 			reclaim_rx_buffers(macb, rx_tail);
 		} else {
-			if (++rx_tail >= CFG_MACB_RX_RING_SIZE) {
+			if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE) {
 				wrapped = 1;
 				rx_tail = 0;
 			}
@@ -303,7 +303,7 @@ static void macb_phy_reset(struct macb_device *macb)
 	macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
 					 | BMCR_ANRESTART));
 
-	for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+	for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
 		status = macb_mdio_read(macb, MII_BMSR);
 		if (status & BMSR_ANEGCOMPLETE)
 			break;
@@ -337,7 +337,7 @@ static int macb_phy_init(struct macb_device *macb)
 		/* Try to re-negotiate if we don't have link already. */
 		macb_phy_reset(macb);
 
-		for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+		for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
 			status = macb_mdio_read(macb, MII_BMSR);
 			if (status & BMSR_LSTATUS)
 				break;
@@ -388,16 +388,16 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
 
 	/* initialize DMA descriptors */
 	paddr = macb->rx_buffer_dma;
-	for (i = 0; i < CFG_MACB_RX_RING_SIZE; i++) {
-		if (i == (CFG_MACB_RX_RING_SIZE - 1))
+	for (i = 0; i < CONFIG_SYS_MACB_RX_RING_SIZE; i++) {
+		if (i == (CONFIG_SYS_MACB_RX_RING_SIZE - 1))
 			paddr |= RXADDR_WRAP;
 		macb->rx_ring[i].addr = paddr;
 		macb->rx_ring[i].ctrl = 0;
 		paddr += 128;
 	}
-	for (i = 0; i < CFG_MACB_TX_RING_SIZE; i++) {
+	for (i = 0; i < CONFIG_SYS_MACB_TX_RING_SIZE; i++) {
 		macb->tx_ring[i].addr = 0;
-		if (i == (CFG_MACB_TX_RING_SIZE - 1))
+		if (i == (CONFIG_SYS_MACB_TX_RING_SIZE - 1))
 			macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
 		else
 			macb->tx_ring[i].ctrl = TXBUF_USED;
@@ -473,12 +473,12 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
 
 	netdev = &macb->netdev;
 
-	macb->rx_buffer = dma_alloc_coherent(CFG_MACB_RX_BUFFER_SIZE,
+	macb->rx_buffer = dma_alloc_coherent(CONFIG_SYS_MACB_RX_BUFFER_SIZE,
 					     &macb->rx_buffer_dma);
-	macb->rx_ring = dma_alloc_coherent(CFG_MACB_RX_RING_SIZE
+	macb->rx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_RX_RING_SIZE
 					   * sizeof(struct macb_dma_desc),
 					   &macb->rx_ring_dma);
-	macb->tx_ring = dma_alloc_coherent(CFG_MACB_TX_RING_SIZE
+	macb->tx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_TX_RING_SIZE
 					   * sizeof(struct macb_dma_desc),
 					   &macb->tx_ring_dma);
 
diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c
index f93cf59..c00474e 100644
--- a/drivers/net/mcffec.c
+++ b/drivers/net/mcffec.c
@@ -51,12 +51,12 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 struct fec_info_s fec_info[] = {
-#ifdef CFG_FEC0_IOBASE
+#ifdef CONFIG_SYS_FEC0_IOBASE
 	{
 	 0,			/* index */
-	 CFG_FEC0_IOBASE,	/* io base */
-	 CFG_FEC0_PINMUX,	/* gpio pin muxing */
-	 CFG_FEC0_MIIBASE,	/* mii base */
+	 CONFIG_SYS_FEC0_IOBASE,	/* io base */
+	 CONFIG_SYS_FEC0_PINMUX,	/* gpio pin muxing */
+	 CONFIG_SYS_FEC0_MIIBASE,	/* mii base */
 	 -1,			/* phy_addr */
 	 0,			/* duplex and speed */
 	 0,			/* phy name */
@@ -70,17 +70,17 @@ struct fec_info_s fec_info[] = {
 	 (struct fec_info_s *)-1,
 	 },
 #endif
-#ifdef CFG_FEC1_IOBASE
+#ifdef CONFIG_SYS_FEC1_IOBASE
 	{
 	 1,			/* index */
-	 CFG_FEC1_IOBASE,	/* io base */
-	 CFG_FEC1_PINMUX,	/* gpio pin muxing */
-	 CFG_FEC1_MIIBASE,	/* mii base */
+	 CONFIG_SYS_FEC1_IOBASE,	/* io base */
+	 CONFIG_SYS_FEC1_PINMUX,	/* gpio pin muxing */
+	 CONFIG_SYS_FEC1_MIIBASE,	/* mii base */
 	 -1,			/* phy_addr */
 	 0,			/* duplex and speed */
 	 0,			/* phy name */
 	 0,			/* phy name init */
-#ifdef CFG_FEC_BUF_USE_SRAM
+#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
 	 (cbd_t *)DBUF_LENGTH,	/* RX BD */
 #else
 	 0,			/* RX BD */
@@ -103,7 +103,7 @@ void fec_reset(struct eth_device *dev);
 
 extern int fecpin_setclear(struct eth_device *dev, int setclear);
 
-#ifdef CFG_DISCOVER_PHY
+#ifdef CONFIG_SYS_DISCOVER_PHY
 extern void __mii_init(void);
 extern uint mii_send(uint mii_cmd);
 extern int mii_discover_phy(struct eth_device *dev);
@@ -175,7 +175,7 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length)
 	/* Activate transmit Buffer Descriptor polling */
 	fecp->tdar = 0x01000000;	/* Descriptor polling active    */
 
-#ifndef CFG_FEC_BUF_USE_SRAM
+#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
 	/*
 	 * FEC unable to initial transmit data packet.
 	 * A nop will ensure the descriptor polling active completed.
@@ -187,7 +187,7 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length)
 
 #endif
 
-#ifdef CFG_UNIFY_CACHE
+#ifdef CONFIG_SYS_UNIFY_CACHE
 	icache_invalid();
 #endif
 
@@ -222,9 +222,9 @@ int fec_recv(struct eth_device *dev)
 	int length;
 
 	for (;;) {
-#ifndef CFG_FEC_BUF_USE_SRAM
+#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
 #endif
-#ifdef CFG_UNIFY_CACHE
+#ifdef CONFIG_SYS_UNIFY_CACHE
 		icache_invalid();
 #endif
 		/* section 16.9.23.2 */
@@ -435,15 +435,15 @@ int fec_init(struct eth_device *dev, bd_t * bd)
 	fec_reset(dev);
 
 #if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
-	defined (CFG_DISCOVER_PHY)
+	defined (CONFIG_SYS_DISCOVER_PHY)
 
 	mii_init();
 
 	setFecDuplexSpeed(fecp, bd, info->dup_spd);
 #else
-#ifndef CFG_DISCOVER_PHY
+#ifndef CONFIG_SYS_DISCOVER_PHY
 	setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
-#endif				/* ifndef CFG_DISCOVER_PHY */
+#endif				/* ifndef CONFIG_SYS_DISCOVER_PHY */
 #endif				/* CONFIG_CMD_MII || CONFIG_MII */
 
 	/* We use strictly polling mode only */
@@ -453,9 +453,9 @@ int fec_init(struct eth_device *dev, bd_t * bd)
 	fecp->eir = 0xffffffff;
 
 	/* Set station address   */
-	if ((u32) fecp == CFG_FEC0_IOBASE) {
-#ifdef CFG_FEC1_IOBASE
-		volatile fec_t *fecp1 = (fec_t *) (CFG_FEC1_IOBASE);
+	if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) {
+#ifdef CONFIG_SYS_FEC1_IOBASE
+		volatile fec_t *fecp1 = (fec_t *) (CONFIG_SYS_FEC1_IOBASE);
 		ea = &bd->bi_enet1addr[0];
 		fecp1->palr =
 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
@@ -466,14 +466,14 @@ int fec_init(struct eth_device *dev, bd_t * bd)
 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
 		fecp->paur = (ea[4] << 24) | (ea[5] << 16);
 	} else {
-#ifdef CFG_FEC0_IOBASE
-		volatile fec_t *fecp0 = (fec_t *) (CFG_FEC0_IOBASE);
+#ifdef CONFIG_SYS_FEC0_IOBASE
+		volatile fec_t *fecp0 = (fec_t *) (CONFIG_SYS_FEC0_IOBASE);
 		ea = &bd->bi_enetaddr[0];
 		fecp0->palr =
 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
 		fecp0->paur = (ea[4] << 24) | (ea[5] << 16);
 #endif
-#ifdef CFG_FEC1_IOBASE
+#ifdef CONFIG_SYS_FEC1_IOBASE
 		ea = &bd->bi_enet1addr[0];
 		fecp->palr =
 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
@@ -568,14 +568,14 @@ int mcffec_initialize(bd_t * bis)
 {
 	struct eth_device *dev;
 	int i;
-#ifdef CFG_FEC_BUF_USE_SRAM
-	u32 tmp = CFG_INIT_RAM_ADDR + 0x1000;
+#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
+	u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000;
 #endif
 
 	for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) {
 
 		dev =
-		    (struct eth_device *)memalign(CFG_CACHELINE_SIZE,
+		    (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
 						  sizeof *dev);
 		if (dev == NULL)
 			hang();
@@ -591,7 +591,7 @@ int mcffec_initialize(bd_t * bis)
 		dev->recv = fec_recv;
 
 		/* setup Receive and Transmit buffer descriptor */
-#ifdef CFG_FEC_BUF_USE_SRAM
+#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
 		fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
 		tmp = (u32)fec_info[i].rxbd;
 		fec_info[i].txbd =
@@ -600,17 +600,17 @@ int mcffec_initialize(bd_t * bis)
 		tmp = (u32)fec_info[i].txbd;
 		fec_info[i].txbuf =
 		    (char *)((u32)fec_info[i].txbuf + tmp +
-		    (CFG_TX_ETH_BUFFER * sizeof(cbd_t)));
+		    (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
 		tmp = (u32)fec_info[i].txbuf;
 #else
 		fec_info[i].rxbd =
-		    (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
 				       (PKTBUFSRX * sizeof(cbd_t)));
 		fec_info[i].txbd =
-		    (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
 				       (TX_BUF_CNT * sizeof(cbd_t)));
 		fec_info[i].txbuf =
-		    (char *)memalign(CFG_CACHELINE_SIZE, DBUF_LENGTH);
+		    (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
 #endif
 
 #ifdef ET_DEBUG
@@ -618,7 +618,7 @@ int mcffec_initialize(bd_t * bis)
 		       (int)fec_info[i].rxbd, (int)fec_info[i].txbd);
 #endif
 
-		fec_info[i].phy_name = (char *)memalign(CFG_CACHELINE_SIZE, 32);
+		fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
 
 		eth_register(dev);
 
diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
index 4a07708..f93f932 100644
--- a/drivers/net/ne2000_base.c
+++ b/drivers/net/ne2000_base.c
@@ -740,7 +740,7 @@ int eth_send(volatile void *packet, int length) {
 	pkey = -1;
 
 	dp83902a_send((u8 *) packet, length, 666);
-	tmo = get_timer (0) + TOUT * CFG_HZ;
+	tmo = get_timer (0) + TOUT * CONFIG_SYS_HZ;
 	while(1) {
 		dp83902a_poll();
 		if (pkey != -1) {
diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c
index c011809..c9e324e 100644
--- a/drivers/net/netarm_eth.c
+++ b/drivers/net/netarm_eth.c
@@ -56,7 +56,7 @@ static void na_mii_write (int reg, int value)
 	int mii_addr;
 
 	/* Select register */
-	mii_addr = CFG_ETH_PHY_ADDR + reg;
+	mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg;
 	SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
 	/* Write value */
 	SET_EADDR (NETARM_ETH_MII_WRITE, value);
@@ -68,7 +68,7 @@ static unsigned int na_mii_read (int reg)
 	int mii_addr, val;
 
 	/* Select register */
-	mii_addr = CFG_ETH_PHY_ADDR + reg;
+	mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg;
 	SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
 	/* do one management cycle */
 	SET_EADDR (NETARM_ETH_MII_CMD,
diff --git a/drivers/net/ns7520_eth.c b/drivers/net/ns7520_eth.c
index e19c223..c28726e 100644
--- a/drivers/net/ns7520_eth.c
+++ b/drivers/net/ns7520_eth.c
@@ -86,8 +86,8 @@ static int nDebugLvl = DEBUG_ERROR_CRIT;
 # define ASSERT(expr, func)
 #endif				/* DEBUG */
 
-#define NS7520_MII_NEG_DELAY		(5*CFG_HZ)	/* in s */
-#define TX_TIMEOUT			(5*CFG_HZ)	/* in s */
+#define NS7520_MII_NEG_DELAY		(5*CONFIG_SYS_HZ)	/* in s */
+#define TX_TIMEOUT			(5*CONFIG_SYS_HZ)	/* in s */
 #define RX_STALL_WORKAROUND_CNT 100
 
 static int ns7520_eth_reset(void);
diff --git a/drivers/net/ns9750_eth.c b/drivers/net/ns9750_eth.c
index cade831..d4901b4 100644
--- a/drivers/net/ns9750_eth.c
+++ b/drivers/net/ns9750_eth.c
@@ -90,8 +90,8 @@ static int nDebugLvl = DEBUG_ERROR_CRIT;
 # define ASSERT(expr, func)
 #endif /* DEBUG */
 
-#define NS9750_MII_NEG_DELAY		(5*CFG_HZ) /* in s */
-#define TX_TIMEOUT			(5*CFG_HZ) /* in s */
+#define NS9750_MII_NEG_DELAY		(5*CONFIG_SYS_HZ) /* in s */
+#define TX_TIMEOUT			(5*CONFIG_SYS_HZ) /* in s */
 
 /* @TODO move it to eeprom.h */
 #define FS_EEPROM_AUTONEG_MASK		0x7
diff --git a/drivers/net/phy/miiphybb.c b/drivers/net/phy/miiphybb.c
index 6446012..e3c163a 100644
--- a/drivers/net/phy/miiphybb.c
+++ b/drivers/net/phy/miiphybb.c
@@ -39,7 +39,7 @@ static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
 {
 	int j;			/* counter */
 #if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+	volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
 #endif
 
 	/*
@@ -124,7 +124,7 @@ int bb_miiphy_read (char *devname, unsigned char addr,
 	short rdreg;		/* register working value */
 	int j;			/* counter */
 #if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+	volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
 #endif
 
 	miiphy_pre (1, addr, reg);
@@ -191,7 +191,7 @@ int bb_miiphy_write (char *devname, unsigned char addr,
 {
 	int j;			/* counter */
 #if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
-	volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+	volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
 #endif
 
 	miiphy_pre (0, addr, reg);
diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h
index af34d7b..8d372b5 100644
--- a/drivers/net/sk98lin/h/skdrv1st.h
+++ b/drivers/net/sk98lin/h/skdrv1st.h
@@ -174,7 +174,7 @@ typedef struct s_AC	SK_AC;
 #if 0
 #define SK_TICKS_PER_SEC	HZ
 #else
-#define SK_TICKS_PER_SEC	CFG_HZ
+#define SK_TICKS_PER_SEC	CONFIG_SYS_HZ
 #endif
 
 #define	SK_MEM_MAPPED_IO
diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h
index 52dc83f..8aad442 100644
--- a/drivers/net/sk98lin/h/skgehw.h
+++ b/drivers/net/sk98lin/h/skgehw.h
@@ -1107,10 +1107,10 @@ extern "C" {
 /*	Values of connector and PMD type comply to SysKonnect internal std */
 
 /*	B2_MAC_CFG	 8 bit	MAC Configuration / Chip Revision */
-#define CFG_CHIP_R_MSK	(0xf<<4)	/* Bit 7.. 4: Chip Revision */
+#define CONFIG_SYS_CHIP_R_MSK	(0xf<<4)	/* Bit 7.. 4: Chip Revision */
 									/* Bit 3.. 2:	reserved */
-#define CFG_DIS_M2_CLK	BIT_1S		/* Disable Clock for 2nd MAC */
-#define CFG_SNG_MAC		BIT_0S		/* MAC Config: 0=2 MACs / 1=1 MAC*/
+#define CONFIG_SYS_DIS_M2_CLK	BIT_1S		/* Disable Clock for 2nd MAC */
+#define CONFIG_SYS_SNG_MAC		BIT_0S		/* MAC Config: 0=2 MACs / 1=1 MAC*/
 
 /*	B2_CHIP_ID	 8 bit	Chip Identification Number */
 #define CHIP_ID_GENESIS	0x0a		/* Chip ID for GENESIS */
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
index ab740c7..df63f27 100644
--- a/drivers/net/sk98lin/skgeinit.c
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -1882,10 +1882,10 @@ SK_IOC	IoC)		/* IO context */
 
 	/* read number of MACs */
 	SK_IN8(IoC, B2_MAC_CFG, &Byte);
-	pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2;
+	pAC->GIni.GIMacsFound = (Byte & CONFIG_SYS_SNG_MAC) ? 1 : 2;
 
 	/* get Chip Revision Number */
-	pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4);
+	pAC->GIni.GIChipRev = (SK_U8)((Byte & CONFIG_SYS_CHIP_R_MSK) >> 4);
 
 	/* get diff. PCI parameters */
 	SK_IN16(IoC, B0_CTST, &CtrlStat);
diff --git a/drivers/net/sk98lin/u-boot_compat.h b/drivers/net/sk98lin/u-boot_compat.h
index 1e385f8..cadf402 100644
--- a/drivers/net/sk98lin/u-boot_compat.h
+++ b/drivers/net/sk98lin/u-boot_compat.h
@@ -54,7 +54,7 @@
 #define EAGAIN				2
 #define EBUSY				3
 
-#define HZ				CFG_HZ
+#define HZ				CONFIG_SYS_HZ
 
 
 #define printk				printf
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index e8b235b..82abb02 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -383,7 +383,7 @@ static void smc_write_phy_register(byte phyreg, word phydata);
 
 static int poll4int (byte mask, int timeout)
 {
-	int tmo = get_timer (0) + timeout * CFG_HZ;
+	int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ;
 	int is_timeout = 0;
 	word old_bank = SMC_inw (BSR_REG);
 
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index e34076f..d7da081 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -305,8 +305,8 @@ static int init_phy(struct eth_device *dev)
 	volatile tsec_t *regs = priv->regs;
 
 	/* Assign a Physical address to the TBI */
-	regs->tbipa = CFG_TBIPA_VALUE;
-	phyregs->tbipa = CFG_TBIPA_VALUE;
+	regs->tbipa = CONFIG_SYS_TBIPA_VALUE;
+	phyregs->tbipa = CONFIG_SYS_TBIPA_VALUE;
 	asm("sync");
 
 	/* Reset MII (due to new addresses) */
@@ -1357,11 +1357,11 @@ struct phy_info phy_info_VSC8601 = {
 				/* Override PHY config settings */
 				/* Configure some basic stuff */
 				{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-#ifdef CFG_VSC8601_SKEWFIX
+#ifdef CONFIG_SYS_VSC8601_SKEWFIX
 				{MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL},
-#if defined(CFG_VSC8601_SKEW_TX) && defined(CFG_VSC8601_SKEW_RX)
+#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
 				{MIIM_EXT_PAGE_ACCESS,1,NULL},
-#define VSC8101_SKEW	(CFG_VSC8601_SKEW_TX<<14)|(CFG_VSC8601_SKEW_RX<<12)
+#define VSC8101_SKEW	(CONFIG_SYS_VSC8601_SKEW_TX<<14)|(CONFIG_SYS_VSC8601_SKEW_RX<<12)
 				{MIIM_VSC8601_SKEW_CTRL,VSC8101_SKEW,NULL},
 				{MIIM_EXT_PAGE_ACCESS,0,NULL},
 #endif
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 50fa765..079354a 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -54,7 +54,7 @@ printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args)
 #define RX_PRINT_ERRORS
 #define TX_PRINT_ERRORS
 
-#define ETH_BASE	(CFG_TSI108_CSR_BASE + 0x6000)
+#define ETH_BASE	(CONFIG_SYS_TSI108_CSR_BASE + 0x6000)
 
 #define ETH_PORT_OFFSET	0x400
 
diff --git a/drivers/net/vsc7385.c b/drivers/net/vsc7385.c
index 4e7259f..ada42c4 100644
--- a/drivers/net/vsc7385.c
+++ b/drivers/net/vsc7385.c
@@ -35,13 +35,13 @@ int vsc7385_upload_firmware(void *firmware, unsigned int size)
 	u8 *fw = firmware;
 	unsigned int i;
 
-	u32 *gloreset = (u32 *) (CFG_VSC7385_BASE + 0x1c050);
-	u32 *icpu_ctrl = (u32 *) (CFG_VSC7385_BASE + 0x1c040);
-	u32 *icpu_addr = (u32 *) (CFG_VSC7385_BASE + 0x1c044);
-	u32 *icpu_data = (u32 *) (CFG_VSC7385_BASE + 0x1c048);
-	u32 *icpu_rom_map = (u32 *) (CFG_VSC7385_BASE + 0x1c070);
+	u32 *gloreset = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c050);
+	u32 *icpu_ctrl = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c040);
+	u32 *icpu_addr = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c044);
+	u32 *icpu_data = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c048);
+	u32 *icpu_rom_map = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c070);
 #ifdef DEBUG
-	u32 *chipid = (u32 *) (CFG_VSC7385_BASE + 0x1c060);
+	u32 *chipid = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c060);
 #endif
 
 	out_be32(gloreset, 3);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b5eea89..41780db 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -157,7 +157,7 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
 
 	for (hose = hose_head; hose; hose = hose->next)
 	{
-#ifdef CFG_SCSI_SCAN_BUS_REVERSE
+#ifdef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
 		for (bus = hose->last_busno; bus >= hose->first_busno; bus--)
 #else
 		for (bus = hose->first_busno; bus <= hose->last_busno; bus++)
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index 2acf9bf..3844359 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -26,9 +26,9 @@
 
 #define	PCIAUTO_IDE_MODE_MASK		0x05
 
-/* the user can define CFG_PCI_CACHE_LINE_SIZE to avoid problems */
-#ifndef CFG_PCI_CACHE_LINE_SIZE
-#define CFG_PCI_CACHE_LINE_SIZE	8
+/* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
+#ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	8
 #endif
 
 /*
@@ -154,7 +154,7 @@ void pciauto_setup_device(struct pci_controller *hose,
 
 	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
 	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
-		CFG_PCI_CACHE_LINE_SIZE);
+		CONFIG_SYS_PCI_CACHE_LINE_SIZE);
 	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
 }
 
diff --git a/drivers/pci/tsi108_pci.c b/drivers/pci/tsi108_pci.c
index edd614f..d153fc6 100644
--- a/drivers/pci/tsi108_pci.c
+++ b/drivers/pci/tsi108_pci.c
@@ -47,32 +47,32 @@ void tsi108_clear_pci_error (void)
 	 * requests.
 	 */
 	/* Read PB Error Log Registers */
-	err_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+	err_stat = *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
 				     TSI108_PB_REG_OFFSET + PB_ERRCS);
-	err_addr = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+	err_addr = *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
 				     TSI108_PB_REG_OFFSET + PB_AERR);
 	if (err_stat & PB_ERRCS_ES) {
 		/* Clear PCI/X bus errors if applicable */
-		if ((err_addr & 0xFF000000) == CFG_PCI_CFG_BASE) {
+		if ((err_addr & 0xFF000000) == CONFIG_SYS_PCI_CFG_BASE) {
 			/* Clear error flag */
-			*(u32 *) (CFG_TSI108_CSR_BASE +
+			*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
 				  TSI108_PB_REG_OFFSET + PB_ERRCS) =
 			    PB_ERRCS_ES;
 
 			/* Clear read error reported in PB_ISR */
-			*(u32 *) (CFG_TSI108_CSR_BASE +
+			*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
 				  TSI108_PB_REG_OFFSET + PB_ISR) =
 			    PB_ISR_PBS_RD_ERR;
 
 		/* Clear errors reported by PCI CSR (Normally Master Abort) */
-			pci_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+			pci_stat = *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
 						     TSI108_PCI_REG_OFFSET +
 						     PCI_CSR);
-			*(volatile u32 *)(CFG_TSI108_CSR_BASE +
+			*(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
 					  TSI108_PCI_REG_OFFSET + PCI_CSR) =
 			    pci_stat;
 
-			*(volatile u32 *)(CFG_TSI108_CSR_BASE +
+			*(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
 					  TSI108_PCI_REG_OFFSET +
 					  PCI_IRP_STAT) = PCI_IRP_STAT_P_CSR;
 		}
@@ -102,8 +102,8 @@ unsigned int __get_pci_config_dword (u32 addr)
 static int tsi108_read_config_dword (struct pci_controller *hose,
 				    pci_dev_t dev, int offset, u32 * value)
 {
-	dev &= (CFG_PCI_CFG_SIZE - 1);
-	dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+	dev &= (CONFIG_SYS_PCI_CFG_SIZE - 1);
+	dev |= (CONFIG_SYS_PCI_CFG_BASE | (offset & 0xfc));
 	*value = __get_pci_config_dword(dev);
 	if (0xFFFFFFFF == *value)
 		tsi108_clear_pci_error ();
@@ -113,8 +113,8 @@ static int tsi108_read_config_dword (struct pci_controller *hose,
 static int tsi108_write_config_dword (struct pci_controller *hose,
 				     pci_dev_t dev, int offset, u32 value)
 {
-	dev &= (CFG_PCI_CFG_SIZE - 1);
-	dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+	dev &= (CONFIG_SYS_PCI_CFG_SIZE - 1);
+	dev |= (CONFIG_SYS_PCI_CFG_BASE | (offset & 0xfc));
 
 	out_le32 ((volatile unsigned *)dev, value);
 
@@ -129,19 +129,19 @@ void pci_init_board (void)
 	hose->last_busno = 0xff;
 
 	pci_set_region (hose->regions + 0,
-		       CFG_PCI_MEMORY_BUS,
-		       CFG_PCI_MEMORY_PHYS,
-		       CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY);
+		       CONFIG_SYS_PCI_MEMORY_BUS,
+		       CONFIG_SYS_PCI_MEMORY_PHYS,
+		       CONFIG_SYS_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY);
 
 	/* PCI memory space */
 	pci_set_region (hose->regions + 1,
-		       CFG_PCI_MEM_BUS,
-		       CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM);
+		       CONFIG_SYS_PCI_MEM_BUS,
+		       CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
 
 	/* PCI I/O space */
 	pci_set_region (hose->regions + 2,
-		       CFG_PCI_IO_BUS,
-		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+		       CONFIG_SYS_PCI_IO_BUS,
+		       CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
 
 	hose->region_count = 3;
 
diff --git a/drivers/pci/w83c553f.c b/drivers/pci/w83c553f.c
index d7355a4..8561422 100644
--- a/drivers/pci/w83c553f.c
+++ b/drivers/pci/w83c553f.c
@@ -42,7 +42,7 @@
 			out_be16((u16*) (addr),(val)); udelay(1); \
 			} while (0)
 
-extern uint ide_bus_offset[CFG_IDE_MAXBUS];
+extern uint ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 
 void initialise_pic(void);
 void initialise_dma(void);
@@ -105,7 +105,7 @@ void initialise_w83c553f(void)
 
 	pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]);
 	ide_bus_offset[0] &= ~1;
-#if CFG_IDE_MAXBUS > 1
+#if CONFIG_SYS_IDE_MAXBUS > 1
 	pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]);
 	ide_bus_offset[1] &= ~1;
 #endif
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 1e2431e..1bcb3a5 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -909,8 +909,8 @@ int i82365_init (void)
 	mem.map = 0;
 	mem.flags = MAP_ATTRIB | MAP_ACTIVE;
 	mem.speed = 300;
-	mem.sys_start = CFG_PCMCIA_MEM_ADDR;
-	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+	mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
+	mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
 	mem.card_start = 0;
 	i365_set_mem_map (&socket, &mem);
 
@@ -918,8 +918,8 @@ int i82365_init (void)
 	mem.map = 1;
 	mem.flags = MAP_ACTIVE;
 	mem.speed = 300;
-	mem.sys_start = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE;
-	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + (2 * CFG_PCMCIA_MEM_SIZE) - 1;
+	mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE;
+	mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + (2 * CONFIG_SYS_PCMCIA_MEM_SIZE) - 1;
 	mem.card_start = 0;
 	i365_set_mem_map (&socket, &mem);
 
@@ -988,8 +988,8 @@ static void i82365_dump_regions (pci_dev_t dev)
 {
 	u_int tmp[2];
 	u_int *mem = (void *) socket.cb_phys;
-	u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
-	u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+	u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
+	u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
 
 	pci_read_config_dword (dev, 0x00, tmp + 0);
 	pci_read_config_dword (dev, 0x80, tmp + 1);
diff --git a/drivers/pcmcia/marubun_pcmcia.c b/drivers/pcmcia/marubun_pcmcia.c
index d075ba3..f715dec 100644
--- a/drivers/pcmcia/marubun_pcmcia.c
+++ b/drivers/pcmcia/marubun_pcmcia.c
@@ -38,20 +38,20 @@
 #if defined(CONFIG_PCMCIA)
 
 /* MR-SHPC-01 register */
-#define MRSHPC_MODE	(CFG_MARUBUN_MRSHPC + 4)
-#define MRSHPC_OPTION   (CFG_MARUBUN_MRSHPC + 6)
-#define MRSHPC_CSR      (CFG_MARUBUN_MRSHPC + 8)
-#define MRSHPC_ISR      (CFG_MARUBUN_MRSHPC + 10)
-#define MRSHPC_ICR      (CFG_MARUBUN_MRSHPC + 12)
-#define MRSHPC_CPWCR    (CFG_MARUBUN_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (CFG_MARUBUN_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (CFG_MARUBUN_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (CFG_MARUBUN_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (CFG_MARUBUN_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (CFG_MARUBUN_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (CFG_MARUBUN_MRSHPC + 26)
-#define MRSHPC_CDCR     (CFG_MARUBUN_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (CFG_MARUBUN_MRSHPC + 30)
+#define MRSHPC_MODE	(CONFIG_SYS_MARUBUN_MRSHPC + 4)
+#define MRSHPC_OPTION   (CONFIG_SYS_MARUBUN_MRSHPC + 6)
+#define MRSHPC_CSR      (CONFIG_SYS_MARUBUN_MRSHPC + 8)
+#define MRSHPC_ISR      (CONFIG_SYS_MARUBUN_MRSHPC + 10)
+#define MRSHPC_ICR      (CONFIG_SYS_MARUBUN_MRSHPC + 12)
+#define MRSHPC_CPWCR    (CONFIG_SYS_MARUBUN_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (CONFIG_SYS_MARUBUN_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (CONFIG_SYS_MARUBUN_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (CONFIG_SYS_MARUBUN_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (CONFIG_SYS_MARUBUN_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (CONFIG_SYS_MARUBUN_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (CONFIG_SYS_MARUBUN_MRSHPC + 26)
+#define MRSHPC_CDCR     (CONFIG_SYS_MARUBUN_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (CONFIG_SYS_MARUBUN_MRSHPC + 30)
 
 int pcmcia_on (void)
 {
@@ -98,8 +98,8 @@ int pcmcia_on (void)
 
 	outw(0x0000,MRSHPC_ISR);
 	outw(0x2000,MRSHPC_ICR);
-	outb(0x00,(CFG_MARUBUN_MW2 + 0x206));
-	outb(0x42,(CFG_MARUBUN_MW2 + 0x200));
+	outb(0x00,(CONFIG_SYS_MARUBUN_MW2 + 0x206));
+	outb(0x42,(CONFIG_SYS_MARUBUN_MW2 + 0x200));
 
 	return 0;
 }
diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c
index 14477a4..95ea5e9 100644
--- a/drivers/pcmcia/mpc8xx_pcmcia.c
+++ b/drivers/pcmcia/mpc8xx_pcmcia.c
@@ -34,8 +34,8 @@ static u_int m8xx_get_speed(u_int ns, u_int is_io);
 
 /* look up table for pgcrx registers */
 u_int *pcmcia_pgcrx[2] = {
-	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcra,
-	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb,
+	&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcra,
+	&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb,
 };
 
 /*
@@ -66,11 +66,11 @@ static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
 #endif
 
 #if	defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
-#define	CFG_PCMCIA_TIMING	(	PCMCIA_SHT(9)	\
+#define	CONFIG_SYS_PCMCIA_TIMING	(	PCMCIA_SHT(9)	\
 				|	PCMCIA_SST(3)	\
 				|	PCMCIA_SL(12))
 #else
-#define	CFG_PCMCIA_TIMING	(	PCMCIA_SHT(2)	\
+#define	CONFIG_SYS_PCMCIA_TIMING	(	PCMCIA_SHT(2)	\
 				|	PCMCIA_SST(4)	\
 				|	PCMCIA_SL(9))
 #endif
@@ -88,12 +88,12 @@ int pcmcia_on (void)
 	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
 
 	/* intialize the fixed memory windows */
-	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
-	base = CFG_PCMCIA_MEM_ADDR;
+	win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0);
+	base = CONFIG_SYS_PCMCIA_MEM_ADDR;
 
-	if((reg = m8xx_get_graycode(CFG_PCMCIA_MEM_SIZE)) == -1) {
+	if((reg = m8xx_get_graycode(CONFIG_SYS_PCMCIA_MEM_SIZE)) == -1) {
 		printf ("Cannot set window size to 0x%08x\n",
-			CFG_PCMCIA_MEM_SIZE);
+			CONFIG_SYS_PCMCIA_MEM_SIZE);
 		return (1);
 	}
 
@@ -125,7 +125,7 @@ int pcmcia_on (void)
 				|	PCMCIA_PRS_ATTR
 				|	slotbit
 				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+				|	CONFIG_SYS_PCMCIA_TIMING );
 			break;
 		}
 		case 5:
@@ -135,7 +135,7 @@ int pcmcia_on (void)
 				|	PCMCIA_PRS_IO
 				|	slotbit
 				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+				|	CONFIG_SYS_PCMCIA_TIMING );
 			break;
 		}
 		case 6:
@@ -145,7 +145,7 @@ int pcmcia_on (void)
 				|	PCMCIA_PRS_IO
 				|	slotbit
 				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+				|	CONFIG_SYS_PCMCIA_TIMING );
 			break;
 		}
 #endif	/* CONFIG_IDE_8xx_PCCARD */
@@ -157,7 +157,7 @@ int pcmcia_on (void)
 				|	PCMCIA_PRS_IO
 				|	slotbit
 				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+				|	CONFIG_SYS_PCMCIA_TIMING );
 			break;
 		}
 #endif	/* CONFIG_HMI10 */
@@ -168,7 +168,7 @@ int pcmcia_on (void)
 
 		debug ("MemWin %d: PBR 0x%08lX  POR %08lX\n",
 		       i, win->br, win->or);
-		base += CFG_PCMCIA_MEM_SIZE;
+		base += CONFIG_SYS_PCMCIA_MEM_SIZE;
 		++win;
 	}
 
@@ -198,14 +198,14 @@ int pcmcia_off (void)
 	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
 
 	/* clear interrupt state, and disable interrupts */
-	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pscr =  PCMCIA_MASK(_slot_);
-	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
+	((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pscr =  PCMCIA_MASK(_slot_);
+	((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
 
 	/* turn off interrupt and disable CxOE */
 	PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE;
 
 	/* turn off memory windows */
-	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
+	win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0);
 
 	for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
 		/* disable memory window */
diff --git a/drivers/pcmcia/pxa_pcmcia.c b/drivers/pcmcia/pxa_pcmcia.c
index 11d8590..d06ab74 100644
--- a/drivers/pcmcia/pxa_pcmcia.c
+++ b/drivers/pcmcia/pxa_pcmcia.c
@@ -13,12 +13,12 @@ static inline void msWait(unsigned msVal)
 int pcmcia_on (void)
 {
 	unsigned int reg_arr[] = {
-		0x48000028, CFG_MCMEM0_VAL,
-		0x4800002c, CFG_MCMEM1_VAL,
-		0x48000030, CFG_MCATT0_VAL,
-		0x48000034, CFG_MCATT1_VAL,
-		0x48000038, CFG_MCIO0_VAL,
-		0x4800003c, CFG_MCIO1_VAL,
+		0x48000028, CONFIG_SYS_MCMEM0_VAL,
+		0x4800002c, CONFIG_SYS_MCMEM1_VAL,
+		0x48000030, CONFIG_SYS_MCATT0_VAL,
+		0x48000034, CONFIG_SYS_MCATT1_VAL,
+		0x48000038, CONFIG_SYS_MCIO0_VAL,
+		0x4800003c, CONFIG_SYS_MCIO1_VAL,
 
 		0, 0
 	};
diff --git a/drivers/pcmcia/ti_pci1410a.c b/drivers/pcmcia/ti_pci1410a.c
index c876d0c..6ab9759 100644
--- a/drivers/pcmcia/ti_pci1410a.c
+++ b/drivers/pcmcia/ti_pci1410a.c
@@ -88,8 +88,8 @@ const char *indent = "\t   ";
 
 int do_pinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-#ifndef CFG_FIRST_PCMCIA_BUS
-# define CFG_FIRST_PCMCIA_BUS 0
+#ifndef CONFIG_SYS_FIRST_PCMCIA_BUS
+# define CONFIG_SYS_FIRST_PCMCIA_BUS 0
 #endif
 
 	int rcode = 0;
@@ -99,7 +99,7 @@ int do_pinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 	if (strcmp(argv[1],"on") == 0) {
-		rcode = pcmcia_on(CFG_FIRST_PCMCIA_BUS);
+		rcode = pcmcia_on(CONFIG_SYS_FIRST_PCMCIA_BUS);
 	} else if (strcmp(argv[1],"off") == 0) {
 		rcode = pcmcia_off();
 	} else {
@@ -148,11 +148,11 @@ int pcmcia_on(int ide_base_bus)
 		debug("Enable PCMCIA Ti PCI1410A\n");
 	}
 
-	pcmcia_cis_ptr = CFG_PCMCIA_CIS_WIN;
-	cis_len = CFG_PCMCIA_CIS_WIN_SIZE;
+	pcmcia_cis_ptr = CONFIG_SYS_PCMCIA_CIS_WIN;
+	cis_len = CONFIG_SYS_PCMCIA_CIS_WIN_SIZE;
 
-	io_base = CFG_PCMCIA_IO_WIN;
-	io_len = CFG_PCMCIA_IO_WIN_SIZE;
+	io_base = CONFIG_SYS_PCMCIA_IO_WIN;
+	io_len = CONFIG_SYS_PCMCIA_IO_WIN_SIZE;
 
 	/*
 	 * Setup the PCI device.
diff --git a/drivers/pcmcia/tqm8xx_pcmcia.c b/drivers/pcmcia/tqm8xx_pcmcia.c
index cc980c2..6ba8b5c 100644
--- a/drivers/pcmcia/tqm8xx_pcmcia.c
+++ b/drivers/pcmcia/tqm8xx_pcmcia.c
@@ -40,7 +40,7 @@
 
 static inline void power_config(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	/*
 	 * Configure Port B  pins for
 	 * 5 Volts Enable and 3 Volts enable
@@ -50,21 +50,21 @@ static inline void power_config(int slot)
 
 static inline void power_off(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	/* remove all power */
 	immap->im_cpm.cp_pbdat |= 0x00000300;
 }
 
 static inline void power_on_5_0(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	immap->im_cpm.cp_pbdat &= ~(0x0000100);
 	immap->im_cpm.cp_pbdir |= 0x00000300;
 }
 
 static inline void power_on_3_3(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	immap->im_cpm.cp_pbdat &= ~(0x0000200);
 	immap->im_cpm.cp_pbdir |= 0x00000300;
 }
@@ -97,7 +97,7 @@ static inline void power_on_3_3(int slot)
 
 static inline void power_config(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	/*
 	* Configure Port C pins for
 	* 5 Volts Enable and 3 Volts enable
@@ -108,20 +108,20 @@ static inline void power_config(int slot)
 
 static inline void power_off(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
 }
 
 static inline void power_on_5_0(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	immap->im_ioport.iop_pcdat |= 0x0004;
 	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
 }
 
 static inline void power_on_3_3(int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	immap->im_ioport.iop_pcdat |= 0x0002;
 	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
 }
@@ -132,14 +132,14 @@ static inline void power_on_3_3(int slot)
 static inline int check_card_is_absent(int slot)
 {
 	volatile pcmconf8xx_t *pcmp =
-		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+		(pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	return pcmp->pcmc_pipr & (0x10000000 >> (slot << 4));
 }
 #else
 static inline int check_card_is_absent(int slot)
 {
 	volatile pcmconf8xx_t *pcmp =
-		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+		(pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	return pcmp->pcmc_pipr & (0x18000000 >> (slot << 4));
 }
 #endif
@@ -153,9 +153,9 @@ static inline int check_card_is_absent(int slot)
 int pcmcia_hardware_enable(int slot)
 {
 	volatile pcmconf8xx_t *pcmp =
-		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+		(pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 	volatile sysconf8xx_t *sysp =
-		(sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+		(sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
 	uint reg, mask;
 
 	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
@@ -271,7 +271,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 	u_long reg;
 # ifdef DEBUG
 	volatile pcmconf8xx_t *pcmp =
-		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+		(pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 # endif
 
 	debug ("voltage_set: " PCMCIA_BOARD_MSG
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 344c649..ed7ed65 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -34,12 +34,12 @@
 #ifdef CONFIG_UEC_ETH1
 static uec_info_t eth1_uec_info = {
 	.uf_info		= {
-		.ucc_num	= CFG_UEC1_UCC_NUM,
-		.rx_clock	= CFG_UEC1_RX_CLK,
-		.tx_clock	= CFG_UEC1_TX_CLK,
-		.eth_type	= CFG_UEC1_ETH_TYPE,
+		.ucc_num	= CONFIG_SYS_UEC1_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC1_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC1_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC1_ETH_TYPE,
 	},
-#if (CFG_UEC1_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC1_ETH_TYPE == FAST_ETH)
 	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
 #else
@@ -50,19 +50,19 @@ static uec_info_t eth1_uec_info = {
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
 	.rx_bd_ring_len		= 16,
-	.phy_address		= CFG_UEC1_PHY_ADDR,
-	.enet_interface		= CFG_UEC1_INTERFACE_MODE,
+	.phy_address		= CONFIG_SYS_UEC1_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC1_INTERFACE_MODE,
 };
 #endif
 #ifdef CONFIG_UEC_ETH2
 static uec_info_t eth2_uec_info = {
 	.uf_info		= {
-		.ucc_num	= CFG_UEC2_UCC_NUM,
-		.rx_clock	= CFG_UEC2_RX_CLK,
-		.tx_clock	= CFG_UEC2_TX_CLK,
-		.eth_type	= CFG_UEC2_ETH_TYPE,
+		.ucc_num	= CONFIG_SYS_UEC2_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC2_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC2_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC2_ETH_TYPE,
 	},
-#if (CFG_UEC2_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC2_ETH_TYPE == FAST_ETH)
 	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
 #else
@@ -73,19 +73,19 @@ static uec_info_t eth2_uec_info = {
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
 	.rx_bd_ring_len		= 16,
-	.phy_address		= CFG_UEC2_PHY_ADDR,
-	.enet_interface		= CFG_UEC2_INTERFACE_MODE,
+	.phy_address		= CONFIG_SYS_UEC2_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC2_INTERFACE_MODE,
 };
 #endif
 #ifdef CONFIG_UEC_ETH3
 static uec_info_t eth3_uec_info = {
 	.uf_info		= {
-		.ucc_num	= CFG_UEC3_UCC_NUM,
-		.rx_clock	= CFG_UEC3_RX_CLK,
-		.tx_clock	= CFG_UEC3_TX_CLK,
-		.eth_type	= CFG_UEC3_ETH_TYPE,
+		.ucc_num	= CONFIG_SYS_UEC3_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC3_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC3_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC3_ETH_TYPE,
 	},
-#if (CFG_UEC3_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC3_ETH_TYPE == FAST_ETH)
 	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
 #else
@@ -96,19 +96,19 @@ static uec_info_t eth3_uec_info = {
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
 	.rx_bd_ring_len		= 16,
-	.phy_address		= CFG_UEC3_PHY_ADDR,
-	.enet_interface		= CFG_UEC3_INTERFACE_MODE,
+	.phy_address		= CONFIG_SYS_UEC3_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC3_INTERFACE_MODE,
 };
 #endif
 #ifdef CONFIG_UEC_ETH4
 static uec_info_t eth4_uec_info = {
 	.uf_info		= {
-		.ucc_num	= CFG_UEC4_UCC_NUM,
-		.rx_clock	= CFG_UEC4_RX_CLK,
-		.tx_clock	= CFG_UEC4_TX_CLK,
-		.eth_type	= CFG_UEC4_ETH_TYPE,
+		.ucc_num	= CONFIG_SYS_UEC4_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC4_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC4_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC4_ETH_TYPE,
 	},
-#if (CFG_UEC4_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC4_ETH_TYPE == FAST_ETH)
 	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
 	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
 #else
@@ -119,12 +119,58 @@ static uec_info_t eth4_uec_info = {
 	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
 	.tx_bd_ring_len		= 16,
 	.rx_bd_ring_len		= 16,
-	.phy_address		= CFG_UEC4_PHY_ADDR,
-	.enet_interface		= CFG_UEC4_INTERFACE_MODE,
+	.phy_address		= CONFIG_SYS_UEC4_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC4_INTERFACE_MODE,
+};
+#endif
+#ifdef CONFIG_UEC_ETH5
+static uec_info_t eth5_uec_info = {
+	.uf_info		= {
+		.ucc_num	= CONFIG_SYS_UEC5_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC5_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC5_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC5_ETH_TYPE,
+	},
+#if (CONFIG_SYS_UEC5_ETH_TYPE == FAST_ETH)
+	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
+#else
+	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
+#endif
+	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.tx_bd_ring_len		= 16,
+	.rx_bd_ring_len		= 16,
+	.phy_address		= CONFIG_SYS_UEC5_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC5_INTERFACE_MODE,
+};
+#endif
+#ifdef CONFIG_UEC_ETH6
+static uec_info_t eth6_uec_info = {
+	.uf_info		= {
+		.ucc_num	= CONFIG_SYS_UEC6_UCC_NUM,
+		.rx_clock	= CONFIG_SYS_UEC6_RX_CLK,
+		.tx_clock	= CONFIG_SYS_UEC6_TX_CLK,
+		.eth_type	= CONFIG_SYS_UEC6_ETH_TYPE,
+	},
+#if (CONFIG_SYS_UEC6_ETH_TYPE == FAST_ETH)
+	.num_threads_tx		= UEC_NUM_OF_THREADS_1,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_1,
+#else
+	.num_threads_tx		= UEC_NUM_OF_THREADS_4,
+	.num_threads_rx		= UEC_NUM_OF_THREADS_4,
+#endif
+	.riscTx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.riscRx			= QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+	.tx_bd_ring_len		= 16,
+	.rx_bd_ring_len		= 16,
+	.phy_address		= CONFIG_SYS_UEC6_PHY_ADDR,
+	.enet_interface		= CONFIG_SYS_UEC6_INTERFACE_MODE,
 };
 #endif
 
-#define MAXCONTROLLERS	(4)
+#define MAXCONTROLLERS	(6)
 
 static struct eth_device *devlist[MAXCONTROLLERS];
 
@@ -424,6 +470,7 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
 			upsmr |= (UPSMR_RPM | UPSMR_TBIM);
 			break;
 		case ENET_1000_RGMII_RXID:
+		case ENET_1000_RGMII_ID:
 		case ENET_1000_RGMII:
 			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
 			upsmr |= UPSMR_RPM;
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index e357a92..0b64499 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -642,6 +642,7 @@ typedef enum enet_interface {
 	ENET_100_RGMII,
 	ENET_1000_GMII,
 	ENET_1000_RGMII,
+	ENET_1000_RGMII_ID,
 	ENET_1000_RGMII_RXID,
 	ENET_1000_TBI,
 	ENET_1000_RTBI
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 186922e..2243d3b 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -376,6 +376,29 @@ static int bcm_init(struct uec_mii_info *mii_info)
 	 return 0;
 }
 
+static int marvell_init(struct uec_mii_info *mii_info)
+{
+	struct eth_device *edev = mii_info->dev;
+	uec_private_t *uec = edev->priv;
+
+	if (uec->uec_info->enet_interface == ENET_1000_RGMII_ID) {
+		int temp;
+
+		temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
+		temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+		phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
+
+		temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
+		temp &= ~MII_M1111_HWCFG_MODE_MASK;
+		temp |= MII_M1111_HWCFG_MODE_RGMII;
+		phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
+
+		phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET);
+	}
+
+	return 0;
+}
+
 static int marvell_read_status (struct uec_mii_info *mii_info)
 {
 	u16 status;
@@ -538,6 +561,7 @@ static struct phy_info phy_info_marvell = {
 	.phy_id_mask = 0xffffff00,
 	.name = "Marvell 88E11x1",
 	.features = MII_GBIT_FEATURES,
+	.init = &marvell_init,
 	.config_aneg = &marvell_config_aneg,
 	.read_status = &marvell_read_status,
 	.ack_interrupt = &marvell_ack_interrupt,
diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
index 6f769fb..7ac1ff9 100644
--- a/drivers/qe/uec_phy.h
+++ b/drivers/qe/uec_phy.h
@@ -77,6 +77,14 @@
 #define MII_M1011_IMASK_INIT		0x6400
 #define MII_M1011_IMASK_CLEAR		0x0000
 
+/* 88E1111 PHY Register */
+#define MII_M1111_PHY_EXT_CR            0x14
+#define MII_M1111_RX_DELAY              0x80
+#define MII_M1111_TX_DELAY              0x2
+#define MII_M1111_PHY_EXT_SR            0x1b
+#define MII_M1111_HWCFG_MODE_MASK       0xf
+#define MII_M1111_HWCFG_MODE_RGMII      0xb
+
 #define MII_DM9161_SCR			0x10
 #define MII_DM9161_SCR_INIT		0x0610
 #define MII_DM9161_SCR_RMII_INIT	0x0710
diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c
index 03c4089..75f88a9 100644
--- a/drivers/rtc/ds1306.c
+++ b/drivers/rtc/ds1306.c
@@ -86,7 +86,7 @@ static void init_spi (void);
 /* read clock time from DS1306 and return it in *tmp */
 int rtc_get (struct rtc_time *tmp)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	unsigned char spi_byte;	/* Data Byte */
 
 	init_spi ();		/* set port B for software SPI */
@@ -143,7 +143,7 @@ int rtc_get (struct rtc_time *tmp)
 /* set clock time in DS1306 RTC and in MPC8xx RTC */
 int rtc_set (struct rtc_time *tmp)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	init_spi ();		/* set port B for software SPI */
 
@@ -218,7 +218,7 @@ int rtc_set (struct rtc_time *tmp)
 /* Initialize Port B for software SPI */
 static void init_spi (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	/* Force output pins to begin at logic 0 */
 	immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK);
@@ -235,7 +235,7 @@ static void init_spi (void)
 /* NOTE: soft_spi_send() assumes that the I/O lines are configured already */
 static void soft_spi_send (unsigned char n)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	unsigned char bitpos;	/* bit position to receive */
 	unsigned char i;	/* Loop Control */
 
@@ -264,7 +264,7 @@ static void soft_spi_send (unsigned char n)
 /* NOTE: soft_spi_read() assumes that the I/O lines are configured already */
 static unsigned char soft_spi_read (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
 	unsigned char spi_byte = 0;	/* Return value, assume success */
 	unsigned char bitpos;	/* bit position to receive */
@@ -314,7 +314,7 @@ int rtc_get (struct rtc_time *tmp)
 	 * step just once.
 	 */
 	if (!slave) {
-		slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+		slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
 				SPI_MODE_3 | SPI_CS_HIGH);
 		if (!slave)
 			return;
@@ -377,7 +377,7 @@ int rtc_set (struct rtc_time *tmp)
 {
 	/* Assuming Vcc = 2.0V (lowest speed) */
 	if (!slave) {
-		slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+		slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
 				SPI_MODE_3 | SPI_CS_HIGH);
 		if (!slave)
 			return;
@@ -408,7 +408,7 @@ void rtc_reset (void)
 {
 	/* Assuming Vcc = 2.0V (lowest speed) */
 	if (!slave) {
-		slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+		slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
 				SPI_MODE_3 | SPI_CS_HIGH);
 		if (!slave)
 			return;
diff --git a/drivers/rtc/ds1307.c b/drivers/rtc/ds1307.c
index afc4b78..0650d91 100644
--- a/drivers/rtc/ds1307.c
+++ b/drivers/rtc/ds1307.c
@@ -47,11 +47,11 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-#ifndef CFG_I2C_RTC_ADDR
-# define CFG_I2C_RTC_ADDR	0x68
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+# define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #endif
 
-#if defined(CONFIG_RTC_DS1307) && (CFG_I2C_SPEED > 100000)
+#if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
 # error The DS1307 is specified only up to 100kHz!
 #endif
 
@@ -187,13 +187,13 @@ void rtc_reset (void)
 static
 uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/ds1337.c b/drivers/rtc/ds1337.c
index 509f81f..58e3966 100644
--- a/drivers/rtc/ds1337.c
+++ b/drivers/rtc/ds1337.c
@@ -160,10 +160,10 @@ int rtc_set (struct rtc_time *tmp)
  * SQW/INTB* pin and program it for 32,768 Hz output. Note that
  * according to the datasheet, turning on the square wave output
  * increases the current drain on the backup battery from about
- * 600 nA to 2uA. Define CFG_RTC_DS1337_NOOSC if you wish to turn
+ * 600 nA to 2uA. Define CONFIG_SYS_RTC_DS1337_NOOSC if you wish to turn
  * off the OSC output.
  */
-#ifdef CFG_RTC_DS1337_NOOSC
+#ifdef CONFIG_SYS_RTC_DS1337_NOOSC
  #define RTC_DS1337_RESET_VAL \
 	(RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
 #else
@@ -182,13 +182,13 @@ void rtc_reset (void)
 static
 uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/ds1374.c b/drivers/rtc/ds1374.c
index 79a3d73..d61a228 100644
--- a/drivers/rtc/ds1374.c
+++ b/drivers/rtc/ds1374.c
@@ -48,11 +48,11 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-#ifndef CFG_I2C_RTC_ADDR
-# define CFG_I2C_RTC_ADDR	0x68
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+# define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #endif
 
-#if defined(CONFIG_RTC_DS1374) && (CFG_I2C_SPEED > 400000)
+#if defined(CONFIG_RTC_DS1374) && (CONFIG_SYS_I2C_SPEED > 400000)
 # error The DS1374 is specified up to 400kHz in fast mode!
 #endif
 
@@ -239,22 +239,22 @@ void rtc_reset (void){
  */
 static uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 static void rtc_write (uchar reg, uchar val, boolean_t set)
 {
 	if (set == TRUE) {
-		val |= i2c_reg_read (CFG_I2C_RTC_ADDR, reg);
-		i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+		val |= i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg);
+		i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 	} else {
-		val = i2c_reg_read (CFG_I2C_RTC_ADDR, reg) & ~val;
-		i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+		val = i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg) & ~val;
+		i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 	}
 }
 
 static void rtc_write_raw (uchar reg, uchar val)
 {
-		i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+		i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 #endif
diff --git a/drivers/rtc/ds1556.c b/drivers/rtc/ds1556.c
index 7574626..763d22a 100644
--- a/drivers/rtc/ds1556.c
+++ b/drivers/rtc/ds1556.c
@@ -43,7 +43,7 @@ static void  rtc_write( unsigned int addr, uchar val);
 static uchar bin2bcd   (unsigned int n);
 static unsigned bcd2bin(uchar c);
 
-#define RTC_BASE		( CFG_NVRAM_SIZE + CFG_NVRAM_BASE_ADDR )
+#define RTC_BASE		( CONFIG_SYS_NVRAM_SIZE + CONFIG_SYS_NVRAM_BASE_ADDR )
 
 #define RTC_YEAR		( RTC_BASE + 0xf )
 #define RTC_MONTH		( RTC_BASE + 0xe )
diff --git a/drivers/rtc/ds164x.c b/drivers/rtc/ds164x.c
index 00494b3..1e96679 100644
--- a/drivers/rtc/ds164x.c
+++ b/drivers/rtc/ds164x.c
@@ -49,7 +49,7 @@ static unsigned bcd2bin(uchar c);
 /*
  * DS164x registers layout
  */
-#define RTC_BASE		( CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE )
+#define RTC_BASE		( CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE )
 
 #define RTC_YEAR		( RTC_BASE + 0x07 )
 #define RTC_MONTH		( RTC_BASE + 0x06 )
diff --git a/drivers/rtc/ds174x.c b/drivers/rtc/ds174x.c
index 43e6ab7..738d118 100644
--- a/drivers/rtc/ds174x.c
+++ b/drivers/rtc/ds174x.c
@@ -40,7 +40,7 @@ static void  rtc_write( unsigned int addr, uchar val);
 static uchar bin2bcd   (unsigned int n);
 static unsigned bcd2bin(uchar c);
 
-#define RTC_BASE		( CFG_NVRAM_SIZE + CFG_NVRAM_BASE_ADDR )
+#define RTC_BASE		( CONFIG_SYS_NVRAM_SIZE + CONFIG_SYS_NVRAM_BASE_ADDR )
 
 #define RTC_YEAR		( RTC_BASE + 7 )
 #define RTC_MONTH		( RTC_BASE + 6 )
diff --git a/drivers/rtc/ds3231.c b/drivers/rtc/ds3231.c
index da8a3e6..ef03358 100644
--- a/drivers/rtc/ds3231.c
+++ b/drivers/rtc/ds3231.c
@@ -177,13 +177,13 @@ void rtc_reset (void)
 static
 uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/isl1208.c b/drivers/rtc/isl1208.c
index 87f06cc..71f63d5 100644
--- a/drivers/rtc/isl1208.c
+++ b/drivers/rtc/isl1208.c
@@ -153,12 +153,12 @@ void rtc_reset (void)
 
 static uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/m41t11.c b/drivers/rtc/m41t11.c
index 0a9b12e..3a77c1b 100644
--- a/drivers/rtc/m41t11.c
+++ b/drivers/rtc/m41t11.c
@@ -35,15 +35,15 @@
 	is what should be done.
 
 #define CONFIG_RTC_M41T11 1
-#define CFG_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
 #if 0
-#define CFG_M41T11_EXT_CENTURY_DATA
+#define CONFIG_SYS_M41T11_EXT_CENTURY_DATA
 #else
-#define CFG_M41T11_BASE_YEAR 2000
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
 #endif
 */
 
-#if defined(CFG_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
+#if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
 
 static unsigned bcd2bin (uchar n)
 {
@@ -75,7 +75,7 @@ static unsigned char bin2bcd (unsigned int n)
 #define RTC_CONTROL_ADDR   0x7
 
 
-#ifndef CFG_M41T11_EXT_CENTURY_DATA
+#ifndef CONFIG_SYS_M41T11_EXT_CENTURY_DATA
 
 #define REG_CNT            (RTC_REG_CNT+1)
 
@@ -83,8 +83,8 @@ static unsigned char bin2bcd (unsigned int n)
   you only get 00-99 for the year we will asume you
   want from the year 2000 if you don't set the config
 */
-#ifndef CFG_M41T11_BASE_YEAR
-#define CFG_M41T11_BASE_YEAR 2000
+#ifndef CONFIG_SYS_M41T11_BASE_YEAR
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
 #endif
 
 #else
@@ -101,7 +101,7 @@ int rtc_get (struct rtc_time *tmp)
 	int rel = 0;
 	uchar data[RTC_REG_CNT];
 
-	i2c_read(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
 
 	if( data[RTC_SEC_ADDR] & 0x80 ){
 		printf( "m41t11 RTC Clock stopped!!!\n" );
@@ -112,14 +112,14 @@ int rtc_get (struct rtc_time *tmp)
 	tmp->tm_hour = bcd2bin (data[RTC_HOUR_ADDR] & 0x3F);
 	tmp->tm_mday = bcd2bin (data[RTC_DATE_ADDR] & 0x3F);
 	tmp->tm_mon  = bcd2bin (data[RTC_MONTH_ADDR]& 0x1F);
-#ifndef CFG_M41T11_EXT_CENTURY_DATA
-	tmp->tm_year = CFG_M41T11_BASE_YEAR
+#ifndef CONFIG_SYS_M41T11_EXT_CENTURY_DATA
+	tmp->tm_year = CONFIG_SYS_M41T11_BASE_YEAR
 		+ bcd2bin(data[RTC_YEARS_ADDR])
 		+ ((data[RTC_HOUR_ADDR]&0x40) ? 100 : 0);
 #else
 	{
 		unsigned char cent;
-		i2c_read(CFG_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
+		i2c_read(CONFIG_SYS_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
 		if( !(data[RTC_HOUR_ADDR] & 0x80) ){
 			printf( "m41t11 RTC: cann't keep track of years without CEB set\n" );
 			rel = -1;
@@ -127,7 +127,7 @@ int rtc_get (struct rtc_time *tmp)
 		if( (cent & 0x1) != ((data[RTC_HOUR_ADDR]&0x40)>>7) ){
 			/*century flip store off new year*/
 			cent += 1;
-			i2c_write(CFG_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
+			i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
 		}
 		tmp->tm_year =((int)cent*100)+bcd2bin(data[RTC_YEARS_ADDR]);
 	}
@@ -161,21 +161,21 @@ int rtc_set (struct rtc_time *tmp)
 	data[RTC_HOUR_ADDR]   |= 0x80;/*we will always use CEB*/
 
 	data[RTC_YEARS_ADDR]  = bin2bcd(tmp->tm_year%100);/*same thing either way*/
-#ifndef CFG_M41T11_EXT_CENTURY_DATA
-	if( ((tmp->tm_year - CFG_M41T11_BASE_YEAR) > 200) ||
-	    (tmp->tm_year < CFG_M41T11_BASE_YEAR) ){
+#ifndef CONFIG_SYS_M41T11_EXT_CENTURY_DATA
+	if( ((tmp->tm_year - CONFIG_SYS_M41T11_BASE_YEAR) > 200) ||
+	    (tmp->tm_year < CONFIG_SYS_M41T11_BASE_YEAR) ){
 		printf( "m41t11 RTC setting year out of range!!need recompile\n" );
 	}
-	data[RTC_HOUR_ADDR] |= (tmp->tm_year - CFG_M41T11_BASE_YEAR) > 100 ? 0x40 : 0;
+	data[RTC_HOUR_ADDR] |= (tmp->tm_year - CONFIG_SYS_M41T11_BASE_YEAR) > 100 ? 0x40 : 0;
 #else
 	{
 		unsigned char cent;
 		cent = tmp->tm_year ? tmp->tm_year / 100 : 0;
 		data[RTC_HOUR_ADDR] |= (cent & 0x1) ? 0x40 : 0;
-		i2c_write(CFG_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
+		i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
 	}
 #endif
-	i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
+	i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
 
 	return 0;
 }
@@ -184,13 +184,13 @@ void rtc_reset (void)
 {
 	unsigned char val;
 	/* clear all control & status registers */
-	i2c_read(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, 1);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, 1);
 	val = val & 0x7F;/*make sure we are running*/
-	i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, RTC_REG_CNT);
+	i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, RTC_REG_CNT);
 
-	i2c_read(CFG_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
 	val = val & 0x3F;/*turn off freq test keep calibration*/
-	i2c_write(CFG_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
+	i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
 }
 
 int rtc_store(int addr, unsigned char* data, int size)
@@ -198,12 +198,12 @@ int rtc_store(int addr, unsigned char* data, int size)
 	/*don't let things wrap onto the time on a write*/
 	if( (addr+size) >= M41T11_STORAGE_SZ )
 		return 1;
-	return i2c_write( CFG_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
+	return i2c_write( CONFIG_SYS_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
 }
 
 int rtc_recall(int addr, unsigned char* data, int size)
 {
-	return i2c_read( CFG_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
+	return i2c_read( CONFIG_SYS_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
 }
 
 #endif
diff --git a/drivers/rtc/m41t60.c b/drivers/rtc/m41t60.c
index 71bfc32..e34a5f4 100644
--- a/drivers/rtc/m41t60.c
+++ b/drivers/rtc/m41t60.c
@@ -34,7 +34,7 @@
 #include <rtc.h>
 #include <i2c.h>
 
-#if defined(CFG_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
+#if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
 
 static unsigned bcd2bin(uchar n)
 {
@@ -85,7 +85,7 @@ static void rtc_dump(char const *const label)
 {
 	uchar data[8];
 
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+	if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
 		printf("I2C read failed in rtc_dump()\n");
 		return;
 	}
@@ -114,7 +114,7 @@ static uchar *rtc_validate(void)
 	uchar min, date, month, years;
 
 	rtc_dump("begin validate");
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+	if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
 		printf("I2C read failed in rtc_validate()\n");
 		return 0;
 	}
@@ -125,7 +125,7 @@ static uchar *rtc_validate(void)
 	if (0x00 != (data[RTC_CTRL] & 0x80)) {
 		printf("M41T60 RTC clock lost power.\n");
 		data[RTC_SEC] = 0x80;
-		if (i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC, 1, data, 1)) {
+		if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC, 1, data, 1)) {
 			printf("I2C write failed in rtc_validate()\n");
 			return 0;
 		}
@@ -161,7 +161,7 @@ static uchar *rtc_validate(void)
 		data[RTC_YEAR] = 0x00;
 		data[RTC_CTRL] &= 0x7F;	/* reset OUT bit */
 
-		if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+		if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
 			printf("I2C write failed in rtc_validate()\n");
 			return 0;
 		}
@@ -212,7 +212,7 @@ int rtc_set(struct rtc_time *tmp)
 	data[RTC_YEAR] = bin2bcd(tmp->tm_year % 100);
 	data[RTC_MONTH] |= year2cb(tmp->tm_year) << 6;
 	data[RTC_DAY] = bin2bcd(tmp->tm_wday + 1) & 0x07;
-	if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, data, RTC_REG_CNT)) {
+	if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, RTC_REG_CNT)) {
 		printf("I2C write failed in rtc_set()\n");
 		return -1;
 	}
@@ -255,10 +255,10 @@ void rtc_reset(void)
 	 * Turn off frequency test.
 	 */
 	data[RTC_CTRL] &= 0xBF;
-	if (i2c_write(CFG_I2C_RTC_ADDR, RTC_CTRL, 1, data + RTC_CTRL, 1)) {
+	if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_CTRL, 1, data + RTC_CTRL, 1)) {
 		printf("I2C write failed in rtc_reset()\n");
 		return;
 	}
 	rtc_dump("end reset");
 }
-#endif /* CONFIG_RTC_M41T60 && CFG_I2C_RTC_ADDR && CONFIG_CMD_DATE */
+#endif /* CONFIG_RTC_M41T60 && CONFIG_SYS_I2C_RTC_ADDR && CONFIG_CMD_DATE */
diff --git a/drivers/rtc/m41t62.c b/drivers/rtc/m41t62.c
index 9b7c84a..cfe84f9 100644
--- a/drivers/rtc/m41t62.c
+++ b/drivers/rtc/m41t62.c
@@ -68,7 +68,7 @@ int rtc_get(struct rtc_time *tm)
 {
 	u8 buf[M41T62_DATETIME_REG_SIZE];
 
-	i2c_read(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
 
 	debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
 	      "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
@@ -104,7 +104,7 @@ int rtc_set(struct rtc_time *tm)
 	      tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
 	      tm->tm_hour, tm->tm_min, tm->tm_sec);
 
-	i2c_read(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
 
 	/* Merge time-data and register flags into buf[0..7] */
 	buf[M41T62_REG_SSEC] = 0;
@@ -123,7 +123,7 @@ int rtc_set(struct rtc_time *tm)
 	/* assume 20YY not 19YY */
 	buf[M41T62_REG_YEAR] = BIN2BCD(tm->tm_year % 100);
 
-	if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE)) {
+	if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE)) {
 		printf("I2C write failed in %s()\n", __func__);
 		return -1;
 	}
diff --git a/drivers/rtc/m48t35ax.c b/drivers/rtc/m48t35ax.c
index e19b81b..1482edd 100644
--- a/drivers/rtc/m48t35ax.c
+++ b/drivers/rtc/m48t35ax.c
@@ -147,14 +147,14 @@ static uchar rtc_read (uchar reg)
 {
 	uchar val;
 	val = *(unsigned char *)
-		((CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - 8) + reg);
+		((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg);
 	return val;
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
 	*(unsigned char *)
-		((CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - 8) + reg) = val;
+		((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg) = val;
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/max6900.c b/drivers/rtc/max6900.c
index 758d7b7..7c99c5e 100644
--- a/drivers/rtc/max6900.c
+++ b/drivers/rtc/max6900.c
@@ -34,20 +34,20 @@
 
 #if defined(CONFIG_CMD_DATE)
 
-#ifndef	CFG_I2C_RTC_ADDR
-#define	CFG_I2C_RTC_ADDR	0x50
+#ifndef	CONFIG_SYS_I2C_RTC_ADDR
+#define	CONFIG_SYS_I2C_RTC_ADDR	0x50
 #endif
 
 /* ------------------------------------------------------------------------- */
 
 static uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 	udelay(2500);
 }
 
diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index 1225454..38484ce 100644
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -38,7 +38,7 @@ static void  rtc_write (uchar reg, uchar val);
 static uchar bin2bcd   (unsigned int n);
 static unsigned bcd2bin(uchar c);
 
-#define RTC_PORT_MC146818	CFG_ISA_IO_BASE_ADDRESS +  0x70
+#define RTC_PORT_MC146818	CONFIG_SYS_ISA_IO_BASE_ADDRESS +  0x70
 #define RTC_SECONDS		0x00
 #define RTC_SECONDS_ALARM	0x01
 #define RTC_MINUTES		0x02
@@ -141,18 +141,18 @@ void rtc_reset (void)
 
 /* ------------------------------------------------------------------------- */
 
-#ifdef CFG_RTC_REG_BASE_ADDR
+#ifdef CONFIG_SYS_RTC_REG_BASE_ADDR
 /*
  * use direct memory access
  */
 static uchar rtc_read (uchar reg)
 {
-	return(in8(CFG_RTC_REG_BASE_ADDR+reg));
+	return(in8(CONFIG_SYS_RTC_REG_BASE_ADDR+reg));
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
-	out8(CFG_RTC_REG_BASE_ADDR+reg, val);
+	out8(CONFIG_SYS_RTC_REG_BASE_ADDR+reg, val);
 }
 #else
 static uchar rtc_read (uchar reg)
diff --git a/drivers/rtc/mcfrtc.c b/drivers/rtc/mcfrtc.c
index c2af197..979c466 100644
--- a/drivers/rtc/mcfrtc.c
+++ b/drivers/rtc/mcfrtc.c
@@ -32,7 +32,7 @@
 
 #undef RTC_DEBUG
 
-#ifndef CFG_MCFRTC_BASE
+#ifndef CONFIG_SYS_MCFRTC_BASE
 #error RTC_BASE is not defined!
 #endif
 
@@ -41,7 +41,7 @@
 
 int rtc_get(struct rtc_time *tmp)
 {
-	volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
+	volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
 
 	int rtc_days, rtc_hrs, rtc_mins;
 	int tim;
@@ -70,7 +70,7 @@ int rtc_get(struct rtc_time *tmp)
 
 int rtc_set(struct rtc_time *tmp)
 {
-	volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
+	volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
 
 	static int month_days[12] = {
 		31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
@@ -112,7 +112,7 @@ int rtc_set(struct rtc_time *tmp)
 
 void rtc_reset(void)
 {
-	volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
+	volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
 
 	if ((rtc->cr & RTC_CR_EN) == 0) {
 		printf("real-time-clock was stopped. Now starting...\n");
diff --git a/drivers/rtc/mpc5xxx.c b/drivers/rtc/mpc5xxx.c
index 6231b9b..ec0b0ef 100644
--- a/drivers/rtc/mpc5xxx.c
+++ b/drivers/rtc/mpc5xxx.c
@@ -57,7 +57,7 @@ typedef struct rtc5200 {
  *****************************************************************************/
 int rtc_get (struct rtc_time *tmp)
 {
-	RTC5200	*rtc = (RTC5200 *) (CFG_MBAR+0x800);
+	RTC5200	*rtc = (RTC5200 *) (CONFIG_SYS_MBAR+0x800);
 	ulong time, date, time2;
 
 	/* read twice to avoid getting a funny time when the second is just changing */
@@ -90,7 +90,7 @@ int rtc_get (struct rtc_time *tmp)
  *****************************************************************************/
 int rtc_set (struct rtc_time *tmp)
 {
-	RTC5200	*rtc = (RTC5200 *) (CFG_MBAR+0x800);
+	RTC5200	*rtc = (RTC5200 *) (CONFIG_SYS_MBAR+0x800);
 	ulong time, date, year;
 
 	debug ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
diff --git a/drivers/rtc/mpc8xx.c b/drivers/rtc/mpc8xx.c
index 2bbc5d3..1c24e59 100644
--- a/drivers/rtc/mpc8xx.c
+++ b/drivers/rtc/mpc8xx.c
@@ -37,7 +37,7 @@
 
 int rtc_get (struct rtc_time *tmp)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	ulong tim;
 
 	tim = immr->im_sit.sit_rtc;
@@ -53,7 +53,7 @@ int rtc_get (struct rtc_time *tmp)
 
 int rtc_set (struct rtc_time *tmp)
 {
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 	ulong tim;
 
 	debug ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
diff --git a/drivers/rtc/pcf8563.c b/drivers/rtc/pcf8563.c
index 2fe1e37..cd9fb65 100644
--- a/drivers/rtc/pcf8563.c
+++ b/drivers/rtc/pcf8563.c
@@ -129,12 +129,12 @@ void rtc_reset (void)
 
 static uchar rtc_read (uchar reg)
 {
-	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
 }
 
 static void rtc_write (uchar reg, uchar val)
 {
-	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
 }
 
 static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/pl031.c b/drivers/rtc/pl031.c
index 6c1e9bd..8b2b174 100644
--- a/drivers/rtc/pl031.c
+++ b/drivers/rtc/pl031.c
@@ -29,8 +29,8 @@
 
 #if defined(CONFIG_CMD_DATE)
 
-#ifndef CFG_RTC_PL031_BASE
-#error CFG_RTC_PL031_BASE is not defined!
+#ifndef CONFIG_SYS_RTC_PL031_BASE
+#error CONFIG_SYS_RTC_PL031_BASE is not defined!
 #endif
 
 /*
@@ -48,9 +48,9 @@
 #define RTC_CR_START	(1 << 0)
 
 #define	RTC_WRITE_REG(addr, val) \
-			(*(volatile unsigned int *)(CFG_RTC_PL031_BASE + (addr)) = (val))
+			(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)) = (val))
 #define	RTC_READ_REG(addr)	\
-			(*(volatile unsigned int *)(CFG_RTC_PL031_BASE + (addr)))
+			(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)))
 
 static int pl031_initted = 0;
 
diff --git a/drivers/rtc/rs5c372.c b/drivers/rtc/rs5c372.c
index 82dd969..d6cd7c8 100644
--- a/drivers/rtc/rs5c372.c
+++ b/drivers/rtc/rs5c372.c
@@ -50,8 +50,8 @@ static unsigned int rtc_debug = DEBUG;
 #define rtc_debug 0	/* gcc will remove all the debug code for us */
 #endif
 
-#ifndef CFG_I2C_RTC_ADDR
-#define CFG_I2C_RTC_ADDR 0x32
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+#define CONFIG_SYS_I2C_RTC_ADDR 0x32
 #endif
 
 #define RS5C372_RAM_SIZE 0x10
@@ -77,7 +77,7 @@ rs5c372_readram(unsigned char *buf, int len)
 {
 	int ret;
 
-	ret = i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, len);
+	ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, len);
 	if (ret != 0) {
 		printf("%s: failed to read\n", __FUNCTION__);
 		return ret;
@@ -117,7 +117,7 @@ rs5c372_enable(void)
 	buf[14] = 0; /* reg. 13 */
 	buf[15] = 0; /* reg. 14 */
 	buf[16] = USE_24HOUR_MODE; /* reg. 15 */
-	ret = i2c_write(CFG_I2C_RTC_ADDR, 0, 0, buf, RS5C372_RAM_SIZE+1);
+	ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, RS5C372_RAM_SIZE+1);
 	if (ret != 0) {
 		printf("%s: failed\n", __FUNCTION__);
 		return;
@@ -218,7 +218,7 @@ int rtc_set (struct rtc_time *tmp)
 	memset(buf, 0, sizeof(buf));
 
 	/* only read register 15 */
-	ret = i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, 1);
+	ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 1);
 
 	if (ret == 0) {
 		/* need to save register 15 */
@@ -247,7 +247,7 @@ int rtc_set (struct rtc_time *tmp)
 			printf("WARNING: year should be between 1970 and 2069!\n");
 		buf[7] = bin2bcd(tmp->tm_year % 100);
 
-		ret = i2c_write(CFG_I2C_RTC_ADDR, 0, 0, buf, 8);
+		ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 8);
 		if (ret != 0) {
 			printf("rs5c372_set_datetime(), i2c_master_send() returned %d\n",ret);
 			return -1;
diff --git a/drivers/rtc/rx8025.c b/drivers/rtc/rx8025.c
index 9f4ce2f..da87394 100644
--- a/drivers/rtc/rx8025.c
+++ b/drivers/rtc/rx8025.c
@@ -42,8 +42,8 @@
 #endif
 /*---------------------------------------------------------------------*/
 
-#ifndef CFG_I2C_RTC_ADDR
-# define CFG_I2C_RTC_ADDR	0x32
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+# define CONFIG_SYS_I2C_RTC_ADDR	0x32
 #endif
 
 /*
@@ -102,7 +102,7 @@ int rtc_get (struct rtc_time *tmp)
 	uchar sec, min, hour, mday, wday, mon, year, ctl2;
 	uchar buf[16];
 
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, 16))
+	if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 16))
 		printf("Error reading from RTC\n");
 
 	sec = rtc_read(RTC_SEC_REG_ADDR);
@@ -189,7 +189,7 @@ void rtc_reset (void)
 	uchar buf[16];
 	uchar ctl2;
 
-	if (i2c_read(CFG_I2C_RTC_ADDR, 0,    0,   buf, 16))
+	if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0,    0,   buf, 16))
 		printf("Error reading from RTC\n");
 
 	ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
@@ -221,7 +221,7 @@ static void rtc_write (uchar reg, uchar val)
 	uchar buf[2];
 	buf[0] = reg << 4;
 	buf[1] = val;
-	if (i2c_write(CFG_I2C_RTC_ADDR, 0, 0, buf, 2) != 0)
+	if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 2) != 0)
 		printf("Error writing to RTC\n");
 
 }
diff --git a/drivers/rtc/x1205.c b/drivers/rtc/x1205.c
index 7a3b514..56115b0 100644
--- a/drivers/rtc/x1205.c
+++ b/drivers/rtc/x1205.c
@@ -96,7 +96,7 @@
 
 static void rtc_write(int reg, u8 val)
 {
-	i2c_write(CFG_I2C_RTC_ADDR, reg, 2, &val, 1);
+	i2c_write(CONFIG_SYS_I2C_RTC_ADDR, reg, 2, &val, 1);
 }
 
 /*
@@ -108,7 +108,7 @@ int rtc_get(struct rtc_time *tm)
 {
 	u8 buf[8];
 
-	i2c_read(CFG_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8);
+	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8);
 
 	debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
 	      "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index a1fcd05..e04fc29 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -41,7 +41,7 @@ int serial_init(void)
 	volatile uart_t *uart;
 	u32 counter;
 
-	uart = (volatile uart_t *)(CFG_UART_BASE);
+	uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 
 	uart_port_conf();
 
@@ -76,7 +76,7 @@ int serial_init(void)
 
 void serial_putc(const char c)
 {
-	volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 
 	if (c == '\n')
 		serial_putc('\r');
@@ -96,7 +96,7 @@ void serial_puts(const char *s)
 
 int serial_getc(void)
 {
-	volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 
 	/* Wait for a character to arrive. */
 	while (!(uart->usr & UART_USR_RXRDY)) ;
@@ -105,14 +105,14 @@ int serial_getc(void)
 
 int serial_tstc(void)
 {
-	volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 
 	return (uart->usr & UART_USR_RXRDY);
 }
 
 void serial_setbrg(void)
 {
-	volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 	u32 counter;
 
 	counter = ((gd->bus_clk / gd->baudrate)) >> 5;
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 6b3f60e..93c2243 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -1,12 +1,12 @@
 /*
  * COM1 NS16550 support
  * originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
  */
 
 #include <config.h>
 
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
 
 #include <ns16550.h>
 
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index b361eef..bce7548 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#ifdef CFG_NS16550_SERIAL
+#ifdef CONFIG_SYS_NS16550_SERIAL
 
 #include <ns16550.h>
 #ifdef CONFIG_NS87308
@@ -48,13 +48,13 @@ DECLARE_GLOBAL_DATA_PTR;
 #error	"Invalid console index value."
 #endif
 
-#if CONFIG_CONS_INDEX == 1 && !defined(CFG_NS16550_COM1)
+#if CONFIG_CONS_INDEX == 1 && !defined(CONFIG_SYS_NS16550_COM1)
 #error	"Console port 1 defined but not configured."
-#elif CONFIG_CONS_INDEX == 2 && !defined(CFG_NS16550_COM2)
+#elif CONFIG_CONS_INDEX == 2 && !defined(CONFIG_SYS_NS16550_COM2)
 #error	"Console port 2 defined but not configured."
-#elif CONFIG_CONS_INDEX == 3 && !defined(CFG_NS16550_COM3)
+#elif CONFIG_CONS_INDEX == 3 && !defined(CONFIG_SYS_NS16550_COM3)
 #error	"Console port 3 defined but not configured."
-#elif CONFIG_CONS_INDEX == 4 && !defined(CFG_NS16550_COM4)
+#elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4)
 #error	"Console port 4 defined but not configured."
 #endif
 
@@ -62,23 +62,23 @@ DECLARE_GLOBAL_DATA_PTR;
  *	 the array is 0 based.
  */
 static NS16550_t serial_ports[4] = {
-#ifdef CFG_NS16550_COM1
-	(NS16550_t)CFG_NS16550_COM1,
+#ifdef CONFIG_SYS_NS16550_COM1
+	(NS16550_t)CONFIG_SYS_NS16550_COM1,
 #else
 	NULL,
 #endif
-#ifdef CFG_NS16550_COM2
-	(NS16550_t)CFG_NS16550_COM2,
+#ifdef CONFIG_SYS_NS16550_COM2
+	(NS16550_t)CONFIG_SYS_NS16550_COM2,
 #else
 	NULL,
 #endif
-#ifdef CFG_NS16550_COM3
-	(NS16550_t)CFG_NS16550_COM3,
+#ifdef CONFIG_SYS_NS16550_COM3
+	(NS16550_t)CONFIG_SYS_NS16550_COM3,
 #else
 	NULL,
 #endif
-#ifdef CFG_NS16550_COM4
-	(NS16550_t)CFG_NS16550_COM4
+#ifdef CONFIG_SYS_NS16550_COM4
+	(NS16550_t)CONFIG_SYS_NS16550_COM4
 #else
 	NULL
 #endif
@@ -126,7 +126,7 @@ static int calc_divisor (NS16550_t port)
 {
 #ifdef CONFIG_OMAP1510
 	/* If can't cleanly clock 115200 set div to 1 */
-	if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
+	if ((CONFIG_SYS_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
 		port->osc_12m_sel = OSC_12M_SEL;	/* enable 6.5 * divisor */
 		return (1);				/* return 1 for base divisor */
 	}
@@ -134,7 +134,7 @@ static int calc_divisor (NS16550_t port)
 #endif
 #ifdef CONFIG_OMAP1610
 	/* If can't cleanly clock 115200 set div to 1 */
-	if ((CFG_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
+	if ((CONFIG_SYS_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
 		return (26);		/* return 26 for base divisor */
 	}
 #endif
@@ -146,11 +146,11 @@ static int calc_divisor (NS16550_t port)
 #endif
 
 	/* Compute divisor value. Normally, we should simply return:
-	 *   CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate
+	 *   CONFIG_SYS_NS16550_CLK) / MODE_X_DIV / gd->baudrate
 	 * but we need to round that value by adding 0.5.
 	 * Rounding is especially important at high baud rates.
 	 */
-	return (CFG_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
+	return (CONFIG_SYS_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
 		(MODE_X_DIV * gd->baudrate);
 }
 
@@ -163,19 +163,19 @@ int serial_init (void)
 	initialise_ns87308();
 #endif
 
-#ifdef CFG_NS16550_COM1
+#ifdef CONFIG_SYS_NS16550_COM1
 	clock_divisor = calc_divisor(serial_ports[0]);
 	NS16550_init(serial_ports[0], clock_divisor);
 #endif
-#ifdef CFG_NS16550_COM2
+#ifdef CONFIG_SYS_NS16550_COM2
 	clock_divisor = calc_divisor(serial_ports[1]);
 	NS16550_init(serial_ports[1], clock_divisor);
 #endif
-#ifdef CFG_NS16550_COM3
+#ifdef CONFIG_SYS_NS16550_COM3
 	clock_divisor = calc_divisor(serial_ports[2]);
 	NS16550_init(serial_ports[2], clock_divisor);
 #endif
-#ifdef CFG_NS16550_COM4
+#ifdef CONFIG_SYS_NS16550_COM4
 	clock_divisor = calc_divisor(serial_ports[3]);
 	NS16550_init(serial_ports[3], clock_divisor);
 #endif
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 9eaf986..c4b36f0 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -67,7 +67,7 @@ void spi_free_slave(struct spi_slave *slave)
 
 void spi_init(void)
 {
-	volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+	volatile spi8xxx_t *spi = &((immap_t *) (CONFIG_SYS_IMMR))->spi;
 
 	/*
 	 * SPI pins on the MPC83xx are not muxed, so all we do is initialize
@@ -94,7 +94,7 @@ void spi_release_bus(struct spi_slave *slave)
 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 		void *din, unsigned long flags)
 {
-	volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+	volatile spi8xxx_t *spi = &((immap_t *) (CONFIG_SYS_IMMR))->spi;
 	unsigned int tmpdout, tmpdin, event;
 	int numBlks = bitlen / 32 + (bitlen % 32 ? 1 : 0);
 	int tm, isRead = 0;
diff --git a/drivers/spi/soft_spi.c b/drivers/spi/soft_spi.c
index 25b589a..13df8cb 100644
--- a/drivers/spi/soft_spi.c
+++ b/drivers/spi/soft_spi.c
@@ -59,7 +59,7 @@ static inline struct soft_spi_slave *to_soft_spi(struct spi_slave *slave)
 void spi_init (void)
 {
 #ifdef	SPI_INIT
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 
 	SPI_INIT;
 #endif
@@ -95,8 +95,8 @@ void spi_free_slave(struct spi_slave *slave)
 
 int spi_claim_bus(struct spi_slave *slave)
 {
-#ifdef CFG_IMMR
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#ifdef CONFIG_SYS_IMMR
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 #endif
 	struct soft_spi_slave *ss = to_soft_spi(slave);
 
@@ -132,8 +132,8 @@ void spi_release_bus(struct spi_slave *slave)
 int  spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 		const void *dout, void *din, unsigned long flags)
 {
-#ifdef CFG_IMMR
-	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#ifdef CONFIG_SYS_IMMR
+	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
 #endif
 	struct soft_spi_slave *ss = to_soft_spi(slave);
 	uchar		tmpdin  = 0;
diff --git a/drivers/usb/sl811_usb.c b/drivers/usb/sl811_usb.c
index 159cc25..48f1ee9 100644
--- a/drivers/usb/sl811_usb.c
+++ b/drivers/usb/sl811_usb.c
@@ -111,7 +111,7 @@ static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
 
 int usb_init_kup4x (void)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	int i;
 	unsigned char tmp;
@@ -265,7 +265,7 @@ static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *b
 
 		sl811_write(SL811_CTRL_A, ctrl);
 		while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
-			if (5*CFG_HZ < get_timer(time_start)) {
+			if (5*CONFIG_SYS_HZ < get_timer(time_start)) {
 				printf("USB transmit timed out\n");
 				return -USB_ST_CRC_ERR;
 			}
diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c
index da11ecb..c1aac33 100644
--- a/drivers/usb/usb_ohci.c
+++ b/drivers/usb/usb_ohci.c
@@ -73,7 +73,7 @@
     defined(CONFIG_440EP) || \
     defined(CONFIG_PCI_OHCI) || \
     defined(CONFIG_MPC5200) || \
-    defined(CFG_OHCI_USE_NPS)
+    defined(CONFIG_SYS_OHCI_USE_NPS)
 # define OHCI_USE_NPS		/* force NoPowerSwitching mode */
 #endif
 
@@ -89,13 +89,13 @@
 /*
  * e.g. PCI controllers need this
  */
-#ifdef CFG_OHCI_SWAP_REG_ACCESS
+#ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS
 # define readl(a) __swap_32(*((volatile u32 *)(a)))
 # define writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a))
 #else
 # define readl(a) (*((volatile u32 *)(a)))
 # define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-#endif /* CFG_OHCI_SWAP_REG_ACCESS */
+#endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */
 
 #define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
 
@@ -129,13 +129,13 @@ static struct pci_device_id ehci_pci_ids[] = {
 #define info(format, arg...) do {} while(0)
 #endif
 
-#ifdef CFG_OHCI_BE_CONTROLLER
+#ifdef CONFIG_SYS_OHCI_BE_CONTROLLER
 # define m16_swap(x) cpu_to_be16(x)
 # define m32_swap(x) cpu_to_be32(x)
 #else
 # define m16_swap(x) cpu_to_le16(x)
 # define m32_swap(x) cpu_to_le32(x)
-#endif /* CFG_OHCI_BE_CONTROLLER */
+#endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */
 
 /* global ohci_t */
 static ohci_t gohci;
@@ -1819,13 +1819,13 @@ int usb_lowlevel_init(void)
 	pci_dev_t pdev;
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 	/* cpu dependant init */
 	if(usb_cpu_init())
 		return -1;
 #endif
 
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 	/*  board dependant init */
 	if(usb_board_init())
 		return -1;
@@ -1873,21 +1873,21 @@ int usb_lowlevel_init(void)
 	} else
 		return -1;
 #else
-	gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE;
+	gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
 #endif
 
 	gohci.flags = 0;
-	gohci.slot_name = CFG_USB_OHCI_SLOT_NAME;
+	gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
 
 	if (hc_reset (&gohci) < 0) {
 		hc_release_ohci (&gohci);
 		err ("can't reset usb-%s", gohci.slot_name);
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 		/* board dependant cleanup */
 		usb_board_init_fail();
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 		/* cpu dependant cleanup */
 		usb_cpu_init_fail();
 #endif
@@ -1901,12 +1901,12 @@ int usb_lowlevel_init(void)
 		err ("can't start usb-%s", gohci.slot_name);
 		hc_release_ohci (&gohci);
 		/* Initialization failed */
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 		/* board dependant cleanup */
 		usb_board_stop();
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 		/* cpu dependant cleanup */
 		usb_cpu_stop();
 #endif
@@ -1932,13 +1932,13 @@ int usb_lowlevel_stop(void)
 	/* call hc_release_ohci() here ? */
 	hc_reset (&gohci);
 
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
 	/* board dependant cleanup */
 	if(usb_board_stop())
 		return -1;
 #endif
 
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
 	/* cpu dependant cleanup */
 	if(usb_cpu_stop())
 		return -1;
diff --git a/drivers/usb/usb_ohci.h b/drivers/usb/usb_ohci.h
index 7a04bf5..c1af547 100644
--- a/drivers/usb/usb_ohci.h
+++ b/drivers/usb/usb_ohci.h
@@ -155,8 +155,8 @@ struct ohci_hcca {
 /*
  * Maximum number of root hub ports.
  */
-#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS
-# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!"
+#ifndef CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS
+# error "CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS undefined!"
 #endif
 
 /*
@@ -191,7 +191,7 @@ struct ohci_regs {
 		__u32	a;
 		__u32	b;
 		__u32	status;
-		__u32	portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS];
+		__u32	portstatus[CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS];
 	} roothub;
 } __attribute((aligned(32)));
 
diff --git a/drivers/usb/usbdcore_mpc8xx.c b/drivers/usb/usbdcore_mpc8xx.c
index 122793c..fa02003 100644
--- a/drivers/usb/usbdcore_mpc8xx.c
+++ b/drivers/usb/usbdcore_mpc8xx.c
@@ -133,7 +133,7 @@ static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid);
 int udc_init (void)
 {
 	/* Init various pointers */
-	immr = (immap_t *) CFG_IMMR;
+	immr = (immap_t *) CONFIG_SYS_IMMR;
 	cp = (cpm8xx_t *) & (immr->im_cpm);
 	usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]);
 	usbp = (usb_t *) & (cp->cp_scc[0]);
@@ -752,7 +752,7 @@ static short mpc8xx_udc_handle_txerr ()
 static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid)
 {
 	if ((*rx_cbdp)->cbd_sc & RX_BD_W) {
-		*rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR);
+		*rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CONFIG_SYS_IMMR);
 
 	} else {
 		(*rx_cbdp)++;
@@ -780,7 +780,7 @@ static void mpc8xx_udc_flush_tx_fifo (int epid)
 	usbp->uscom = 0x40 | 0;
 
 	/* reset ring */
-	tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR);
+	tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CONFIG_SYS_IMMR);
 	tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W);
 
 
@@ -886,7 +886,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
 	}
 
 	ep = epi->endpoint_address & 0x03;
-	tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+	tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CONFIG_SYS_IMMR);
 
 	if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) {
 		mpc8xx_udc_flush_tx_fifo (ep);
@@ -903,7 +903,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
 			return -1;
 		}
 
-		tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+		tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CONFIG_SYS_IMMR);
 		while (tx_cbdp->cbd_sc & TX_BD_R) {
 		};
 		tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W);
@@ -1187,10 +1187,10 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
 				   volatile cpm8xx_t * cp)
 {
 
-#if defined(CFG_USB_EXTC_CLK)
+#if defined(CONFIG_SYS_USB_EXTC_CLK)
 
 	/* This has been tested with a 48MHz crystal on CLK6 */
-	switch (CFG_USB_EXTC_CLK) {
+	switch (CONFIG_SYS_USB_EXTC_CLK) {
 	case 1:
 		immr->im_ioport.iop_papar |= 0x0100;
 		immr->im_ioport.iop_padir &= ~0x0100;
@@ -1216,7 +1216,7 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
 		break;
 	}
 
-#elif defined(CFG_USB_BRGCLK)
+#elif defined(CONFIG_SYS_USB_BRGCLK)
 
 	/* This has been tested with brgclk == 50MHz */
 	int divisor = 0;
@@ -1233,7 +1233,7 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
 	divisor = (gd->cpu_clk / 48000000L) - 1;
 	cp->cp_sicr &= ~0x0000003F;
 
-	switch (CFG_USB_BRGCLK) {
+	switch (CONFIG_SYS_USB_BRGCLK) {
 	case 1:
 		cp->cp_brgc1 |= (divisor | CPM_BRG_EN);
 		cp->cp_sicr &= ~0x2F;
@@ -1256,7 +1256,7 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
 	}
 
 #else
-#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined"
+#error "CONFIG_SYS_USB_EXTC_CLK or CONFIG_SYS_USB_BRGCLK must be defined"
 #endif
 
 }
diff --git a/drivers/video/ati_radeon_fb.c b/drivers/video/ati_radeon_fb.c
index 650380b..9ebb0b0 100644
--- a/drivers/video/ati_radeon_fb.c
+++ b/drivers/video/ati_radeon_fb.c
@@ -653,7 +653,7 @@ void *video_hw_init(void)
 
 	tmp = 0;
 
-	videomode = CFG_DEFAULT_VIDEO_MODE;
+	videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
 	/* get video mode via environment */
 	if ((penv = getenv ("videomode")) != NULL) {
 		/* deceide if it is a string */
@@ -672,7 +672,7 @@ void *video_hw_init(void)
 				break;
 		}
 		if (i == VESA_MODES_COUNT) {
-			printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE);
+			printf ("no VESA Mode found, switching to mode 0x%x ", CONFIG_SYS_DEFAULT_VIDEO_MODE);
 			i = 0;
 		}
 		res_mode = (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i].resindex];
@@ -732,7 +732,7 @@ void *video_hw_init(void)
 		break;
 	}
 
-	pGD->isaBase = CFG_ISA_IO_BASE_ADDRESS;
+	pGD->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
 	pGD->pciBase = rinfo->fb_base_phys;
 	pGD->frameAdrs = rinfo->fb_base_phys;
 	pGD->memSize = 64 * 1024 * 1024;
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index fe418f1..779aa4b 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -61,7 +61,7 @@
 
  CONFIG_CONSOLE_CURSOR	     - on/off drawing cursor is done with delay
 			       loop in VIDEO_TSTC_FCT (i8042)
- CFG_CONSOLE_BLINK_COUNT     - value for delay loop - blink rate
+ CONFIG_SYS_CONSOLE_BLINK_COUNT     - value for delay loop - blink rate
  CONFIG_CONSOLE_TIME	     - display time/date in upper right corner,
 			       needs CONFIG_CMD_DATE and CONFIG_CONSOLE_CURSOR
  CONFIG_VIDEO_LOGO	     - display Linux Logo in upper left corner
@@ -824,19 +824,19 @@ int video_display_bitmap (ulong bmp_image, int x, int y)
 		/*
 		 * Could be a gzipped bmp image, try to decrompress...
 		 */
-		len = CFG_VIDEO_LOGO_MAX_SIZE;
-		dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
+		len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
+		dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE);
 		if (dst == NULL) {
 			printf("Error: malloc in gunzip failed!\n");
 			return(1);
 		}
-		if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)bmp_image, &len) != 0) {
+		if (gunzip(dst, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE, (uchar *)bmp_image, &len) != 0) {
 			printf ("Error: no valid bmp or bmp.gz image at %lx\n", bmp_image);
 			free(dst);
 			return 1;
 		}
-		if (len == CFG_VIDEO_LOGO_MAX_SIZE) {
-			printf("Image could be truncated (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
+		if (len == CONFIG_SYS_VIDEO_LOGO_MAX_SIZE) {
+			printf("Image could be truncated (increase CONFIG_SYS_VIDEO_LOGO_MAX_SIZE)!\n");
 		}
 
 		/*
diff --git a/drivers/video/ct69000.c b/drivers/video/ct69000.c
index cae662e..ae219cc 100644
--- a/drivers/video/ct69000.c
+++ b/drivers/video/ct69000.c
@@ -1107,7 +1107,7 @@ video_hw_init (void)
 		pGD->gdfIndex = GDF_24BIT_888RGB;
 		break;
 	}
-	pGD->isaBase = CFG_ISA_IO_BASE_ADDRESS;
+	pGD->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
 	pGD->pciBase = pci_mem_base;
 	pGD->frameAdrs = pci_mem_base;
 	pGD->memSize = chips_param->max_mem;
diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c
index d47cb03..22a85d1 100644
--- a/drivers/video/mb862xx.c
+++ b/drivers/video/mb862xx.c
@@ -358,7 +358,7 @@ void *video_hw_init (void)
 #endif
 
 #if (defined(CONFIG_LWMON5) || \
-     defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CFG_POST_SYSMON)
+     defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON)
 	/* Lamp on */
 	board_backlight_switch (1);
 #endif
diff --git a/drivers/video/smiLynxEM.c b/drivers/video/smiLynxEM.c
index 390dd56..59b43ef 100644
--- a/drivers/video/smiLynxEM.c
+++ b/drivers/video/smiLynxEM.c
@@ -596,7 +596,7 @@ void *video_hw_init (void)
 
 	tmp = 0;
 
-	videomode = CFG_DEFAULT_VIDEO_MODE;
+	videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
 	/* get video mode via environment */
 	if ((penv = getenv ("videomode")) != NULL) {
 		/* deceide if it is a string */
@@ -615,7 +615,7 @@ void *video_hw_init (void)
 				break;
 		}
 		if (i == VESA_MODES_COUNT) {
-			printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE);
+			printf ("no VESA Mode found, switching to mode 0x%x ", CONFIG_SYS_DEFAULT_VIDEO_MODE);
 			i = 0;
 		}
 		res_mode =
@@ -669,7 +669,7 @@ void *video_hw_init (void)
 		break;
 	}
 
-	pGD->isaBase = CFG_ISA_IO;
+	pGD->isaBase = CONFIG_SYS_ISA_IO;
 	pGD->pciBase = pci_mem_base;
 	pGD->dprBase = (pci_mem_base + 0x400000 + 0x8000);
 	pGD->vprBase = (pci_mem_base + 0x400000 + 0xc000);
diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c
index c81e5bc..d27ce1d 100644
--- a/drivers/video/videomodes.c
+++ b/drivers/video/videomodes.c
@@ -23,7 +23,7 @@
 
 /************************************************************************
   Get Parameters for the video mode:
-  The default video mode can be defined in CFG_DEFAULT_VIDEO_MODE.
+  The default video mode can be defined in CONFIG_SYS_DEFAULT_VIDEO_MODE.
   If undefined, default video mode is set to 0x301
   Parameters can be set via the variable "videomode" in the environment.
   2 diferent ways are possible:
diff --git a/drivers/video/videomodes.h b/drivers/video/videomodes.h
index e2dffe7..0d7c335 100644
--- a/drivers/video/videomodes.h
+++ b/drivers/video/videomodes.h
@@ -22,8 +22,8 @@
  */
 
 
-#ifndef CFG_DEFAULT_VIDEO_MODE
-#define CFG_DEFAULT_VIDEO_MODE	0x301
+#ifndef CONFIG_SYS_DEFAULT_VIDEO_MODE
+#define CONFIG_SYS_DEFAULT_VIDEO_MODE	0x301
 #endif
 
 /* Some mode definitions */