Merge with git://www.denx.de/git/u-boot.git

8 files changed, 2377 insertions, 23 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 52cd388..b8dc97b 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -32,7 +32,7 @@ COBJS	= 3c589.o 5701rls.o ali512x.o atmel_usart.o \
 	  cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
 	  e1000.o eepro100.o \
 	  i8042.o inca-ip_sw.o isp116x-hcd.o keyboard.o \
-	  lan91c96.o \
+	  lan91c96.o macb.o\
 	  natsemi.o ne2000.o netarm_eth.o netconsole.o \
 	  ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
 	  omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \
@@ -46,6 +46,7 @@ COBJS	= 3c589.o 5701rls.o ali512x.o atmel_usart.o \
 	  sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
 	  status_led.o sym53c8xx.o systemace.o ahci.o \
 	  ti_pci1410a.o tigon3.o tsec.o \
+	  tsi108_eth.o tsi108_i2c.o tsi108_pci.o \
 	  usb_ohci.o \
 	  usbdcore.o usbdcore_ep0.o usbdcore_mpc8xx.o usbdcore_omap1510.o \
 	  usbtty.o \
diff --git a/drivers/atmel_usart.c b/drivers/atmel_usart.c
index 41c3768..f35b997 100644
--- a/drivers/atmel_usart.c
+++ b/drivers/atmel_usart.c
@@ -19,7 +19,22 @@
 
 #ifdef CONFIG_ATMEL_USART
 #include <asm/io.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#if defined(CONFIG_USART0)
+# define USART_ID	0
+# define USART_BASE	USART0_BASE
+#elif defined(CONFIG_USART1)
+# define USART_ID	1
+# define USART_BASE	USART1_BASE
+#elif defined(CONFIG_USART2)
+# define USART_ID	2
+# define USART_BASE	USART2_BASE
+#elif defined(CONFIG_USART3)
+# define USART_ID	3
+# define USART_BASE	USART3_BASE
+#endif
 
 #include "atmel_usart.h"
 
@@ -35,26 +50,23 @@ void serial_setbrg(void)
 	 * Baud Rate = --------------
 	 *                16 * CD
 	 */
-	usart_hz = pm_get_clock_freq(gd->console_uart->resource[0].u.clock.id);
+	usart_hz = get_usart_clk_rate(USART_ID);
 	divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
-	usart3_writel(gd->console_uart, BRGR, USART3_BF(CD, divisor));
+	usart3_writel(BRGR, USART3_BF(CD, divisor));
 }
 
 int serial_init(void)
 {
-	usart3_writel(gd->console_uart, CR,
-		      USART3_BIT(RSTRX) | USART3_BIT(RSTTX));
+	usart3_writel(CR, USART3_BIT(RSTRX) | USART3_BIT(RSTTX));
 
 	serial_setbrg();
 
-	usart3_writel(gd->console_uart, CR,
-		      USART3_BIT(RXEN) | USART3_BIT(TXEN));
-	usart3_writel(gd->console_uart, MR,
-		      USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
-		      | USART3_BF(USCLKS, USART3_USCLKS_MCK)
-		      | USART3_BF(CHRL, USART3_CHRL_8)
-		      | USART3_BF(PAR, USART3_PAR_NONE)
-		      | USART3_BF(NBSTOP, USART3_NBSTOP_1));
+	usart3_writel(CR, USART3_BIT(RXEN) | USART3_BIT(TXEN));
+	usart3_writel(MR, (USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
+			   | USART3_BF(USCLKS, USART3_USCLKS_MCK)
+			   | USART3_BF(CHRL, USART3_CHRL_8)
+			   | USART3_BF(PAR, USART3_PAR_NONE)
+			   | USART3_BF(NBSTOP, USART3_NBSTOP_1)));
 
 	return 0;
 }
@@ -64,8 +76,8 @@ void serial_putc(char c)
 	if (c == '\n')
 		serial_putc('\r');
 
-	while (!(usart3_readl(gd->console_uart, CSR) & USART3_BIT(TXRDY))) ;
-	usart3_writel(gd->console_uart, THR, c);
+	while (!(usart3_readl(CSR) & USART3_BIT(TXRDY))) ;
+	usart3_writel(THR, c);
 }
 
 void serial_puts(const char *s)
@@ -76,13 +88,13 @@ void serial_puts(const char *s)
 
 int serial_getc(void)
 {
-	while (!(usart3_readl(gd->console_uart, CSR) & USART3_BIT(RXRDY))) ;
-	return usart3_readl(gd->console_uart, RHR);
+	while (!(usart3_readl(CSR) & USART3_BIT(RXRDY))) ;
+	return usart3_readl(RHR);
 }
 
 int serial_tstc(void)
 {
-	return (usart3_readl(gd->console_uart, CSR) & USART3_BIT(RXRDY)) != 0;
+	return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0;
 }
 
 #endif /* CONFIG_ATMEL_USART */
diff --git a/drivers/atmel_usart.h b/drivers/atmel_usart.h
index fad90a8..af3773a 100644
--- a/drivers/atmel_usart.h
+++ b/drivers/atmel_usart.h
@@ -306,9 +306,9 @@
 	 | USART3_BF(name,value))
 
 /* Register access macros */
-#define usart3_readl(port,reg)				\
-	readl((port)->regs + USART3_##reg)
-#define usart3_writel(port,reg,value)			\
-	writel((value), (port)->regs + USART3_##reg)
+#define usart3_readl(reg)				\
+	readl((void *)USART_BASE + USART3_##reg)
+#define usart3_writel(reg,value)			\
+	writel((value), (void *)USART_BASE + USART3_##reg)
 
 #endif /* __DRIVERS_ATMEL_USART_H__ */
diff --git a/drivers/macb.c b/drivers/macb.c
new file mode 100644
index 0000000..186ab19
--- /dev/null
+++ b/drivers/macb.c
@@ -0,0 +1,575 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <common.h>
+
+#if defined(CONFIG_MACB) && (CONFIG_COMMANDS & (CFG_CMD_NET | CFG_CMD_MII))
+
+/*
+ * The u-boot networking stack is a little weird.  It seems like the
+ * networking core allocates receive buffers up front without any
+ * regard to the hardware that's supposed to actually receive those
+ * packets.
+ *
+ * The MACB receives packets into 128-byte receive buffers, so the
+ * buffers allocated by the core isn't very practical to use.  We'll
+ * allocate our own, but we need one such buffer in case a packet
+ * wraps around the DMA ring so that we have to copy it.
+ *
+ * Therefore, define CFG_RX_ETH_BUFFER to 1 in the board-specific
+ * configuration header.  This way, the core allocates one RX buffer
+ * and one TX buffer, each of which can hold a ethernet packet of
+ * maximum size.
+ *
+ * For some reason, the networking core unconditionally specifies a
+ * 32-byte packet "alignment" (which really should be called
+ * "padding").  MACB shouldn't need that, but we'll refrain from any
+ * core modifications here...
+ */
+
+#include <net.h>
+#include <malloc.h>
+
+#include <linux/mii.h>
+#include <asm/io.h>
+#include <asm/dma-mapping.h>
+#include <asm/arch/clk.h>
+
+#include "macb.h"
+
+#define CFG_MACB_RX_BUFFER_SIZE		4096
+#define CFG_MACB_RX_RING_SIZE		(CFG_MACB_RX_BUFFER_SIZE / 128)
+#define CFG_MACB_TX_RING_SIZE		16
+#define CFG_MACB_TX_TIMEOUT		1000
+#define CFG_MACB_AUTONEG_TIMEOUT	5000000
+
+struct macb_dma_desc {
+	u32	addr;
+	u32	ctrl;
+};
+
+#define RXADDR_USED		0x00000001
+#define RXADDR_WRAP		0x00000002
+
+#define RXBUF_FRMLEN_MASK	0x00000fff
+#define RXBUF_FRAME_START	0x00004000
+#define RXBUF_FRAME_END		0x00008000
+#define RXBUF_TYPEID_MATCH	0x00400000
+#define RXBUF_ADDR4_MATCH	0x00800000
+#define RXBUF_ADDR3_MATCH	0x01000000
+#define RXBUF_ADDR2_MATCH	0x02000000
+#define RXBUF_ADDR1_MATCH	0x04000000
+#define RXBUF_BROADCAST		0x80000000
+
+#define TXBUF_FRMLEN_MASK	0x000007ff
+#define TXBUF_FRAME_END		0x00008000
+#define TXBUF_NOCRC		0x00010000
+#define TXBUF_EXHAUSTED		0x08000000
+#define TXBUF_UNDERRUN		0x10000000
+#define TXBUF_MAXRETRY		0x20000000
+#define TXBUF_WRAP		0x40000000
+#define TXBUF_USED		0x80000000
+
+struct macb_device {
+	void			*regs;
+
+	unsigned int		rx_tail;
+	unsigned int		tx_head;
+	unsigned int		tx_tail;
+
+	void			*rx_buffer;
+	void			*tx_buffer;
+	struct macb_dma_desc	*rx_ring;
+	struct macb_dma_desc	*tx_ring;
+
+	unsigned long		rx_buffer_dma;
+	unsigned long		rx_ring_dma;
+	unsigned long		tx_ring_dma;
+
+	const struct device	*dev;
+	struct eth_device	netdev;
+	unsigned short		phy_addr;
+};
+#define to_macb(_nd) container_of(_nd, struct macb_device, netdev)
+
+static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value)
+{
+	unsigned long netctl;
+	unsigned long netstat;
+	unsigned long frame;
+
+	netctl = macb_readl(macb, NCR);
+	netctl |= MACB_BIT(MPE);
+	macb_writel(macb, NCR, netctl);
+
+	frame = (MACB_BF(SOF, 1)
+		 | MACB_BF(RW, 1)
+		 | MACB_BF(PHYA, macb->phy_addr)
+		 | MACB_BF(REGA, reg)
+		 | MACB_BF(CODE, 2)
+		 | MACB_BF(DATA, value));
+	macb_writel(macb, MAN, frame);
+
+	do {
+		netstat = macb_readl(macb, NSR);
+	} while (!(netstat & MACB_BIT(IDLE)));
+
+	netctl = macb_readl(macb, NCR);
+	netctl &= ~MACB_BIT(MPE);
+	macb_writel(macb, NCR, netctl);
+}
+
+static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
+{
+	unsigned long netctl;
+	unsigned long netstat;
+	unsigned long frame;
+
+	netctl = macb_readl(macb, NCR);
+	netctl |= MACB_BIT(MPE);
+	macb_writel(macb, NCR, netctl);
+
+	frame = (MACB_BF(SOF, 1)
+		 | MACB_BF(RW, 2)
+		 | MACB_BF(PHYA, macb->phy_addr)
+		 | MACB_BF(REGA, reg)
+		 | MACB_BF(CODE, 2));
+	macb_writel(macb, MAN, frame);
+
+	do {
+		netstat = macb_readl(macb, NSR);
+	} while (!(netstat & MACB_BIT(IDLE)));
+
+	frame = macb_readl(macb, MAN);
+
+	netctl = macb_readl(macb, NCR);
+	netctl &= ~MACB_BIT(MPE);
+	macb_writel(macb, NCR, netctl);
+
+	return MACB_BFEXT(DATA, frame);
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+static int macb_send(struct eth_device *netdev, volatile void *packet,
+		     int length)
+{
+	struct macb_device *macb = to_macb(netdev);
+	unsigned long paddr, ctrl;
+	unsigned int tx_head = macb->tx_head;
+	int i;
+
+	paddr = dma_map_single(packet, length, DMA_TO_DEVICE);
+
+	ctrl = length & TXBUF_FRMLEN_MASK;
+	ctrl |= TXBUF_FRAME_END;
+	if (tx_head == (CFG_MACB_TX_RING_SIZE - 1)) {
+		ctrl |= TXBUF_WRAP;
+		macb->tx_head = 0;
+	} else
+		macb->tx_head++;
+
+	macb->tx_ring[tx_head].ctrl = ctrl;
+	macb->tx_ring[tx_head].addr = paddr;
+	macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
+
+	/*
+	 * I guess this is necessary because the networking core may
+	 * re-use the transmit buffer as soon as we return...
+	 */
+	i = 0;
+	while (!(macb->tx_ring[tx_head].ctrl & TXBUF_USED)) {
+		if (i > CFG_MACB_TX_TIMEOUT) {
+			printf("%s: TX timeout\n", netdev->name);
+			break;
+		}
+		udelay(1);
+		i++;
+	}
+
+	dma_unmap_single(packet, length, paddr);
+
+	if (i <= CFG_MACB_TX_TIMEOUT) {
+		ctrl = macb->tx_ring[tx_head].ctrl;
+		if (ctrl & TXBUF_UNDERRUN)
+			printf("%s: TX underrun\n", netdev->name);
+		if (ctrl & TXBUF_EXHAUSTED)
+			printf("%s: TX buffers exhausted in mid frame\n",
+			       netdev->name);
+	}
+
+	/* No one cares anyway */
+	return 0;
+}
+
+static void reclaim_rx_buffers(struct macb_device *macb,
+			       unsigned int new_tail)
+{
+	unsigned int i;
+
+	i = macb->rx_tail;
+	while (i > new_tail) {
+		macb->rx_ring[i].addr &= ~RXADDR_USED;
+		i++;
+		if (i > CFG_MACB_RX_RING_SIZE)
+			i = 0;
+	}
+
+	while (i < new_tail) {
+		macb->rx_ring[i].addr &= ~RXADDR_USED;
+		i++;
+	}
+
+	macb->rx_tail = new_tail;
+}
+
+static int macb_recv(struct eth_device *netdev)
+{
+	struct macb_device *macb = to_macb(netdev);
+	unsigned int rx_tail = macb->rx_tail;
+	void *buffer;
+	int length;
+	int wrapped = 0;
+	u32 status;
+
+	for (;;) {
+		if (!(macb->rx_ring[rx_tail].addr & RXADDR_USED))
+			return -1;
+
+		status = macb->rx_ring[rx_tail].ctrl;
+		if (status & RXBUF_FRAME_START) {
+			if (rx_tail != macb->rx_tail)
+				reclaim_rx_buffers(macb, rx_tail);
+			wrapped = 0;
+		}
+
+		if (status & RXBUF_FRAME_END) {
+			buffer = macb->rx_buffer + 128 * macb->rx_tail;
+			length = status & RXBUF_FRMLEN_MASK;
+			if (wrapped) {
+				unsigned int headlen, taillen;
+
+				headlen = 128 * (CFG_MACB_RX_RING_SIZE
+						 - macb->rx_tail);
+				taillen = length - headlen;
+				memcpy((void *)NetRxPackets[0],
+				       buffer, headlen);
+				memcpy((void *)NetRxPackets[0] + headlen,
+				       macb->rx_buffer, taillen);
+				buffer = (void *)NetRxPackets[0];
+			}
+
+			NetReceive(buffer, length);
+			if (++rx_tail >= CFG_MACB_RX_RING_SIZE)
+				rx_tail = 0;
+			reclaim_rx_buffers(macb, rx_tail);
+		} else {
+			if (++rx_tail >= CFG_MACB_RX_RING_SIZE) {
+				wrapped = 1;
+				rx_tail = 0;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int macb_phy_init(struct macb_device *macb)
+{
+	struct eth_device *netdev = &macb->netdev;
+	u32 ncfgr;
+	u16 phy_id, status, adv, lpa;
+	int media, speed, duplex;
+	int i;
+
+	/* Check if the PHY is up to snuff... */
+	phy_id = macb_mdio_read(macb, MII_PHYSID1);
+	if (phy_id == 0xffff) {
+		printf("%s: No PHY present\n", netdev->name);
+		return 0;
+	}
+
+	adv = ADVERTISE_CSMA | ADVERTISE_ALL;
+	macb_mdio_write(macb, MII_ADVERTISE, adv);
+	printf("%s: Starting autonegotiation...\n", netdev->name);
+	macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
+					 | BMCR_ANRESTART));
+
+#if 0
+	for (i = 0; i < 9; i++)
+		printf("mii%d: 0x%04x\n", i, macb_mdio_read(macb, i));
+#endif
+
+	for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+		status = macb_mdio_read(macb, MII_BMSR);
+		if (status & BMSR_ANEGCOMPLETE)
+			break;
+		udelay(100);
+	}
+
+	if (status & BMSR_ANEGCOMPLETE)
+		printf("%s: Autonegotiation complete\n", netdev->name);
+	else
+		printf("%s: Autonegotiation timed out (status=0x%04x)\n",
+		       netdev->name, status);
+
+	if (!(status & BMSR_LSTATUS)) {
+		for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+			udelay(100);
+			status = macb_mdio_read(macb, MII_BMSR);
+			if (status & BMSR_LSTATUS)
+				break;
+		}
+	}
+
+	if (!(status & BMSR_LSTATUS)) {
+		printf("%s: link down (status: 0x%04x)\n",
+		       netdev->name, status);
+		return 0;
+	} else {
+		lpa = macb_mdio_read(macb, MII_LPA);
+		media = mii_nway_result(lpa & adv);
+		speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
+			 ? 1 : 0);
+		duplex = (media & ADVERTISE_FULL) ? 1 : 0;
+		printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
+		       netdev->name,
+		       speed ? "100" : "10",
+		       duplex ? "full" : "half",
+		       lpa);
+
+		ncfgr = macb_readl(macb, NCFGR);
+		ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
+		if (speed)
+			ncfgr |= MACB_BIT(SPD);
+		if (duplex)
+			ncfgr |= MACB_BIT(FD);
+		macb_writel(macb, NCFGR, ncfgr);
+		return 1;
+	}
+}
+
+static int macb_init(struct eth_device *netdev, bd_t *bd)
+{
+	struct macb_device *macb = to_macb(netdev);
+	unsigned long paddr;
+	u32 hwaddr_bottom;
+	u16 hwaddr_top;
+	int i;
+
+	/*
+	 * macb_halt should have been called at some point before now,
+	 * so we'll assume the controller is idle.
+	 */
+
+	/* initialize DMA descriptors */
+	paddr = macb->rx_buffer_dma;
+	for (i = 0; i < CFG_MACB_RX_RING_SIZE; i++) {
+		if (i == (CFG_MACB_RX_RING_SIZE - 1))
+			paddr |= RXADDR_WRAP;
+		macb->rx_ring[i].addr = paddr;
+		macb->rx_ring[i].ctrl = 0;
+		paddr += 128;
+	}
+	for (i = 0; i < CFG_MACB_TX_RING_SIZE; i++) {
+		macb->tx_ring[i].addr = 0;
+		if (i == (CFG_MACB_TX_RING_SIZE - 1))
+			macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
+		else
+			macb->tx_ring[i].ctrl = TXBUF_USED;
+	}
+	macb->rx_tail = macb->tx_head = macb->tx_tail = 0;
+
+	macb_writel(macb, RBQP, macb->rx_ring_dma);
+	macb_writel(macb, TBQP, macb->tx_ring_dma);
+
+	/* set hardware address */
+	hwaddr_bottom = cpu_to_le32(*((u32 *)netdev->enetaddr));
+	macb_writel(macb, SA1B, hwaddr_bottom);
+	hwaddr_top = cpu_to_le16(*((u16 *)(netdev->enetaddr + 4)));
+	macb_writel(macb, SA1T, hwaddr_top);
+
+	/* choose RMII or MII mode. This depends on the board */
+#ifdef CONFIG_RMII
+	macb_writel(macb, USRIO, 0);
+#else
+	macb_writel(macb, USRIO, MACB_BIT(MII));
+#endif
+
+	if (!macb_phy_init(macb))
+		return 0;
+
+	/* Enable TX and RX */
+	macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE));
+
+	return 1;
+}
+
+static void macb_halt(struct eth_device *netdev)
+{
+	struct macb_device *macb = to_macb(netdev);
+	u32 ncr, tsr;
+
+	/* Halt the controller and wait for any ongoing transmission to end. */
+	ncr = macb_readl(macb, NCR);
+	ncr |= MACB_BIT(THALT);
+	macb_writel(macb, NCR, ncr);
+
+	do {
+		tsr = macb_readl(macb, TSR);
+	} while (tsr & MACB_BIT(TGO));
+
+	/* Disable TX and RX, and clear statistics */
+	macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
+}
+
+int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
+{
+	struct macb_device *macb;
+	struct eth_device *netdev;
+	unsigned long macb_hz;
+	u32 ncfgr;
+
+	macb = malloc(sizeof(struct macb_device));
+	if (!macb) {
+		printf("Error: Failed to allocate memory for MACB%d\n", id);
+		return -1;
+	}
+	memset(macb, 0, sizeof(struct macb_device));
+
+	netdev = &macb->netdev;
+
+	macb->rx_buffer = dma_alloc_coherent(CFG_MACB_RX_BUFFER_SIZE,
+					     &macb->rx_buffer_dma);
+	macb->rx_ring = dma_alloc_coherent(CFG_MACB_RX_RING_SIZE
+					   * sizeof(struct macb_dma_desc),
+					   &macb->rx_ring_dma);
+	macb->tx_ring = dma_alloc_coherent(CFG_MACB_TX_RING_SIZE
+					   * sizeof(struct macb_dma_desc),
+					   &macb->tx_ring_dma);
+
+	macb->regs = regs;
+	macb->phy_addr = phy_addr;
+
+	sprintf(netdev->name, "macb%d", id);
+	netdev->init = macb_init;
+	netdev->halt = macb_halt;
+	netdev->send = macb_send;
+	netdev->recv = macb_recv;
+
+	/*
+	 * Do some basic initialization so that we at least can talk
+	 * to the PHY
+	 */
+	macb_hz = get_macb_pclk_rate(id);
+	if (macb_hz < 20000000)
+		ncfgr = MACB_BF(CLK, MACB_CLK_DIV8);
+	else if (macb_hz < 40000000)
+		ncfgr = MACB_BF(CLK, MACB_CLK_DIV16);
+	else if (macb_hz < 80000000)
+		ncfgr = MACB_BF(CLK, MACB_CLK_DIV32);
+	else
+		ncfgr = MACB_BF(CLK, MACB_CLK_DIV64);
+
+	macb_writel(macb, NCFGR, ncfgr);
+
+	eth_register(netdev);
+
+	return 0;
+}
+
+#endif /* (CONFIG_COMMANDS & CFG_CMD_NET) */
+
+#if (CONFIG_COMMANDS & CFG_CMD_MII)
+
+int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
+{
+	unsigned long netctl;
+	unsigned long netstat;
+	unsigned long frame;
+	int iflag;
+
+	iflag = disable_interrupts();
+	netctl = macb_readl(&macb, EMACB_NCR);
+	netctl |= MACB_BIT(MPE);
+	macb_writel(&macb, EMACB_NCR, netctl);
+	if (iflag)
+		enable_interrupts();
+
+	frame = (MACB_BF(SOF, 1)
+		 | MACB_BF(RW, 2)
+		 | MACB_BF(PHYA, addr)
+		 | MACB_BF(REGA, reg)
+		 | MACB_BF(CODE, 2));
+	macb_writel(&macb, EMACB_MAN, frame);
+
+	do {
+		netstat = macb_readl(&macb, EMACB_NSR);
+	} while (!(netstat & MACB_BIT(IDLE)));
+
+	frame = macb_readl(&macb, EMACB_MAN);
+	*value = MACB_BFEXT(DATA, frame);
+
+	iflag = disable_interrupts();
+	netctl = macb_readl(&macb, EMACB_NCR);
+	netctl &= ~MACB_BIT(MPE);
+	macb_writel(&macb, EMACB_NCR, netctl);
+	if (iflag)
+		enable_interrupts();
+
+	return 0;
+}
+
+int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
+{
+	unsigned long netctl;
+	unsigned long netstat;
+	unsigned long frame;
+	int iflag;
+
+	iflag = disable_interrupts();
+	netctl = macb_readl(&macb, EMACB_NCR);
+	netctl |= MACB_BIT(MPE);
+	macb_writel(&macb, EMACB_NCR, netctl);
+	if (iflag)
+		enable_interrupts();
+
+	frame = (MACB_BF(SOF, 1)
+		 | MACB_BF(RW, 1)
+		 | MACB_BF(PHYA, addr)
+		 | MACB_BF(REGA, reg)
+		 | MACB_BF(CODE, 2)
+		 | MACB_BF(DATA, value));
+	macb_writel(&macb, EMACB_MAN, frame);
+
+	do {
+		netstat = macb_readl(&macb, EMACB_NSR);
+	} while (!(netstat & MACB_BIT(IDLE)));
+
+	iflag = disable_interrupts();
+	netctl = macb_readl(&macb, EMACB_NCR);
+	netctl &= ~MACB_BIT(MPE);
+	macb_writel(&macb, EMACB_NCR, netctl);
+	if (iflag)
+		enable_interrupts();
+
+	return 0;
+}
+
+#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */
+
+#endif /* CONFIG_MACB */
diff --git a/drivers/macb.h b/drivers/macb.h
new file mode 100644
index 0000000..c778e4e
--- /dev/null
+++ b/drivers/macb.h
@@ -0,0 +1,269 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __DRIVERS_MACB_H__
+#define __DRIVERS_MACB_H__
+
+/* MACB register offsets */
+#define MACB_NCR				0x0000
+#define MACB_NCFGR				0x0004
+#define MACB_NSR				0x0008
+#define MACB_TSR				0x0014
+#define MACB_RBQP				0x0018
+#define MACB_TBQP				0x001c
+#define MACB_RSR				0x0020
+#define MACB_ISR				0x0024
+#define MACB_IER				0x0028
+#define MACB_IDR				0x002c
+#define MACB_IMR				0x0030
+#define MACB_MAN				0x0034
+#define MACB_PTR				0x0038
+#define MACB_PFR				0x003c
+#define MACB_FTO				0x0040
+#define MACB_SCF				0x0044
+#define MACB_MCF				0x0048
+#define MACB_FRO				0x004c
+#define MACB_FCSE				0x0050
+#define MACB_ALE				0x0054
+#define MACB_DTF				0x0058
+#define MACB_LCOL				0x005c
+#define MACB_EXCOL				0x0060
+#define MACB_TUND				0x0064
+#define MACB_CSE				0x0068
+#define MACB_RRE				0x006c
+#define MACB_ROVR				0x0070
+#define MACB_RSE				0x0074
+#define MACB_ELE				0x0078
+#define MACB_RJA				0x007c
+#define MACB_USF				0x0080
+#define MACB_STE				0x0084
+#define MACB_RLE				0x0088
+#define MACB_TPF				0x008c
+#define MACB_HRB				0x0090
+#define MACB_HRT				0x0094
+#define MACB_SA1B				0x0098
+#define MACB_SA1T				0x009c
+#define MACB_SA2B				0x00a0
+#define MACB_SA2T				0x00a4
+#define MACB_SA3B				0x00a8
+#define MACB_SA3T				0x00ac
+#define MACB_SA4B				0x00b0
+#define MACB_SA4T				0x00b4
+#define MACB_TID				0x00b8
+#define MACB_TPQ				0x00bc
+#define MACB_USRIO				0x00c0
+#define MACB_WOL				0x00c4
+
+/* Bitfields in NCR */
+#define MACB_LB_OFFSET				0
+#define MACB_LB_SIZE				1
+#define MACB_LLB_OFFSET				1
+#define MACB_LLB_SIZE				1
+#define MACB_RE_OFFSET				2
+#define MACB_RE_SIZE				1
+#define MACB_TE_OFFSET				3
+#define MACB_TE_SIZE				1
+#define MACB_MPE_OFFSET				4
+#define MACB_MPE_SIZE				1
+#define MACB_CLRSTAT_OFFSET			5
+#define MACB_CLRSTAT_SIZE			1
+#define MACB_INCSTAT_OFFSET			6
+#define MACB_INCSTAT_SIZE			1
+#define MACB_WESTAT_OFFSET			7
+#define MACB_WESTAT_SIZE			1
+#define MACB_BP_OFFSET				8
+#define MACB_BP_SIZE				1
+#define MACB_TSTART_OFFSET			9
+#define MACB_TSTART_SIZE			1
+#define MACB_THALT_OFFSET			10
+#define MACB_THALT_SIZE				1
+#define MACB_NCR_TPF_OFFSET			11
+#define MACB_NCR_TPF_SIZE			1
+#define MACB_TZQ_OFFSET				12
+#define MACB_TZQ_SIZE				1
+
+/* Bitfields in NCFGR */
+#define MACB_SPD_OFFSET				0
+#define MACB_SPD_SIZE				1
+#define MACB_FD_OFFSET				1
+#define MACB_FD_SIZE				1
+#define MACB_BIT_RATE_OFFSET			2
+#define MACB_BIT_RATE_SIZE			1
+#define MACB_JFRAME_OFFSET			3
+#define MACB_JFRAME_SIZE			1
+#define MACB_CAF_OFFSET				4
+#define MACB_CAF_SIZE				1
+#define MACB_NBC_OFFSET				5
+#define MACB_NBC_SIZE				1
+#define MACB_NCFGR_MTI_OFFSET			6
+#define MACB_NCFGR_MTI_SIZE			1
+#define MACB_UNI_OFFSET				7
+#define MACB_UNI_SIZE				1
+#define MACB_BIG_OFFSET				8
+#define MACB_BIG_SIZE				1
+#define MACB_EAE_OFFSET				9
+#define MACB_EAE_SIZE				1
+#define MACB_CLK_OFFSET				10
+#define MACB_CLK_SIZE				2
+#define MACB_RTY_OFFSET				12
+#define MACB_RTY_SIZE				1
+#define MACB_PAE_OFFSET				13
+#define MACB_PAE_SIZE				1
+#define MACB_RBOF_OFFSET			14
+#define MACB_RBOF_SIZE				2
+#define MACB_RLCE_OFFSET			16
+#define MACB_RLCE_SIZE				1
+#define MACB_DRFCS_OFFSET			17
+#define MACB_DRFCS_SIZE				1
+#define MACB_EFRHD_OFFSET			18
+#define MACB_EFRHD_SIZE				1
+#define MACB_IRXFCS_OFFSET			19
+#define MACB_IRXFCS_SIZE			1
+
+/* Bitfields in NSR */
+#define MACB_NSR_LINK_OFFSET			0
+#define MACB_NSR_LINK_SIZE			1
+#define MACB_MDIO_OFFSET			1
+#define MACB_MDIO_SIZE				1
+#define MACB_IDLE_OFFSET			2
+#define MACB_IDLE_SIZE				1
+
+/* Bitfields in TSR */
+#define MACB_UBR_OFFSET				0
+#define MACB_UBR_SIZE				1
+#define MACB_COL_OFFSET				1
+#define MACB_COL_SIZE				1
+#define MACB_TSR_RLE_OFFSET			2
+#define MACB_TSR_RLE_SIZE			1
+#define MACB_TGO_OFFSET				3
+#define MACB_TGO_SIZE				1
+#define MACB_BEX_OFFSET				4
+#define MACB_BEX_SIZE				1
+#define MACB_COMP_OFFSET			5
+#define MACB_COMP_SIZE				1
+#define MACB_UND_OFFSET				6
+#define MACB_UND_SIZE				1
+
+/* Bitfields in RSR */
+#define MACB_BNA_OFFSET				0
+#define MACB_BNA_SIZE				1
+#define MACB_REC_OFFSET				1
+#define MACB_REC_SIZE				1
+#define MACB_OVR_OFFSET				2
+#define MACB_OVR_SIZE				1
+
+/* Bitfields in ISR/IER/IDR/IMR */
+#define MACB_MFD_OFFSET				0
+#define MACB_MFD_SIZE				1
+#define MACB_RCOMP_OFFSET			1
+#define MACB_RCOMP_SIZE				1
+#define MACB_RXUBR_OFFSET			2
+#define MACB_RXUBR_SIZE				1
+#define MACB_TXUBR_OFFSET			3
+#define MACB_TXUBR_SIZE				1
+#define MACB_ISR_TUND_OFFSET			4
+#define MACB_ISR_TUND_SIZE			1
+#define MACB_ISR_RLE_OFFSET			5
+#define MACB_ISR_RLE_SIZE			1
+#define MACB_TXERR_OFFSET			6
+#define MACB_TXERR_SIZE				1
+#define MACB_TCOMP_OFFSET			7
+#define MACB_TCOMP_SIZE				1
+#define MACB_ISR_LINK_OFFSET			9
+#define MACB_ISR_LINK_SIZE			1
+#define MACB_ISR_ROVR_OFFSET			10
+#define MACB_ISR_ROVR_SIZE			1
+#define MACB_HRESP_OFFSET			11
+#define MACB_HRESP_SIZE				1
+#define MACB_PFR_OFFSET				12
+#define MACB_PFR_SIZE				1
+#define MACB_PTZ_OFFSET				13
+#define MACB_PTZ_SIZE				1
+
+/* Bitfields in MAN */
+#define MACB_DATA_OFFSET			0
+#define MACB_DATA_SIZE				16
+#define MACB_CODE_OFFSET			16
+#define MACB_CODE_SIZE				2
+#define MACB_REGA_OFFSET			18
+#define MACB_REGA_SIZE				5
+#define MACB_PHYA_OFFSET			23
+#define MACB_PHYA_SIZE				5
+#define MACB_RW_OFFSET				28
+#define MACB_RW_SIZE				2
+#define MACB_SOF_OFFSET				30
+#define MACB_SOF_SIZE				2
+
+/* Bitfields in USRIO */
+#define MACB_MII_OFFSET				0
+#define MACB_MII_SIZE				1
+#define MACB_EAM_OFFSET				1
+#define MACB_EAM_SIZE				1
+#define MACB_TX_PAUSE_OFFSET			2
+#define MACB_TX_PAUSE_SIZE			1
+#define MACB_TX_PAUSE_ZERO_OFFSET		3
+#define MACB_TX_PAUSE_ZERO_SIZE			1
+
+/* Bitfields in WOL */
+#define MACB_IP_OFFSET				0
+#define MACB_IP_SIZE				16
+#define MACB_MAG_OFFSET				16
+#define MACB_MAG_SIZE				1
+#define MACB_ARP_OFFSET				17
+#define MACB_ARP_SIZE				1
+#define MACB_SA1_OFFSET				18
+#define MACB_SA1_SIZE				1
+#define MACB_WOL_MTI_OFFSET			19
+#define MACB_WOL_MTI_SIZE			1
+
+/* Constants for CLK */
+#define MACB_CLK_DIV8				0
+#define MACB_CLK_DIV16				1
+#define MACB_CLK_DIV32				2
+#define MACB_CLK_DIV64				3
+
+/* Constants for MAN register */
+#define MACB_MAN_SOF				1
+#define MACB_MAN_WRITE				1
+#define MACB_MAN_READ				2
+#define MACB_MAN_CODE				2
+
+/* Bit manipulation macros */
+#define MACB_BIT(name)					\
+	(1 << MACB_##name##_OFFSET)
+#define MACB_BF(name,value)				\
+	(((value) & ((1 << MACB_##name##_SIZE) - 1))	\
+	 << MACB_##name##_OFFSET)
+#define MACB_BFEXT(name,value)\
+	(((value) >> MACB_##name##_OFFSET)		\
+	 & ((1 << MACB_##name##_SIZE) - 1))
+#define MACB_BFINS(name,value,old)			\
+	(((old) & ~(((1 << MACB_##name##_SIZE) - 1)	\
+		    << MACB_##name##_OFFSET))		\
+	 | MACB_BF(name,value))
+
+/* Register access macros */
+#define macb_readl(port,reg)				\
+	readl((port)->regs + MACB_##reg)
+#define macb_writel(port,reg,value)			\
+	writel((value), (port)->regs + MACB_##reg)
+
+#endif /* __DRIVERS_MACB_H__ */
diff --git a/drivers/tsi108_eth.c b/drivers/tsi108_eth.c
new file mode 100644
index 0000000..47341be
--- /dev/null
+++ b/drivers/tsi108_eth.c
@@ -0,0 +1,1036 @@
+/***********************************************************************
+ *
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description:
+ *   Ethernet interface for Tundra TSI108 bridge chip
+ *
+ ***********************************************************************/
+
+#include <config.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
+	&& defined(CONFIG_TSI108_ETH)
+
+#if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2)
+#error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2"
+#endif
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/cache.h>
+
+#ifdef DEBUG
+#define TSI108_ETH_DEBUG 7
+#else
+#define TSI108_ETH_DEBUG 0
+#endif
+
+#if TSI108_ETH_DEBUG > 0
+#define debug_lev(lev, fmt, args...) \
+if (lev <= TSI108_ETH_DEBUG) \
+printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args)
+#else
+#define debug_lev(lev, fmt, args...) do{}while(0)
+#endif
+
+#define RX_PRINT_ERRORS
+#define TX_PRINT_ERRORS
+
+#define ETH_BASE	(CFG_TSI108_CSR_BASE + 0x6000)
+
+#define ETH_PORT_OFFSET	0x400
+
+#define __REG32(base, offset) (*((volatile u32 *)((char *)(base) + (offset))))
+
+#define reg_MAC_CONFIG_1(base)		__REG32(base, 0x00000000)
+#define MAC_CONFIG_1_TX_ENABLE		(0x00000001)
+#define MAC_CONFIG_1_SYNC_TX_ENABLE	(0x00000002)
+#define MAC_CONFIG_1_RX_ENABLE		(0x00000004)
+#define MAC_CONFIG_1_SYNC_RX_ENABLE	(0x00000008)
+#define MAC_CONFIG_1_TX_FLOW_CONTROL	(0x00000010)
+#define MAC_CONFIG_1_RX_FLOW_CONTROL	(0x00000020)
+#define MAC_CONFIG_1_LOOP_BACK		(0x00000100)
+#define MAC_CONFIG_1_RESET_TX_FUNCTION	(0x00010000)
+#define MAC_CONFIG_1_RESET_RX_FUNCTION	(0x00020000)
+#define MAC_CONFIG_1_RESET_TX_MAC	(0x00040000)
+#define MAC_CONFIG_1_RESET_RX_MAC	(0x00080000)
+#define MAC_CONFIG_1_SIM_RESET		(0x40000000)
+#define MAC_CONFIG_1_SOFT_RESET		(0x80000000)
+
+#define reg_MAC_CONFIG_2(base)		__REG32(base, 0x00000004)
+#define MAC_CONFIG_2_FULL_DUPLEX	(0x00000001)
+#define MAC_CONFIG_2_CRC_ENABLE		(0x00000002)
+#define MAC_CONFIG_2_PAD_CRC		(0x00000004)
+#define MAC_CONFIG_2_LENGTH_CHECK	(0x00000010)
+#define MAC_CONFIG_2_HUGE_FRAME		(0x00000020)
+#define MAC_CONFIG_2_INTERFACE_MODE(val)	(((val) & 0x3) << 8)
+#define MAC_CONFIG_2_PREAMBLE_LENGTH(val)	(((val) & 0xf) << 12)
+#define INTERFACE_MODE_NIBBLE		1	/* 10/100 Mb/s MII) */
+#define INTERFACE_MODE_BYTE		2	/* 1000 Mb/s GMII/TBI */
+
+#define reg_MAXIMUM_FRAME_LENGTH(base)		__REG32(base, 0x00000010)
+
+#define reg_MII_MGMT_CONFIG(base)		__REG32(base, 0x00000020)
+#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val)	((val) & 0x7)
+#define MII_MGMT_CONFIG_NO_PREAMBLE		(0x00000010)
+#define MII_MGMT_CONFIG_SCAN_INCREMENT		(0x00000020)
+#define MII_MGMT_CONFIG_RESET_MGMT		(0x80000000)
+
+#define reg_MII_MGMT_COMMAND(base)		__REG32(base, 0x00000024)
+#define MII_MGMT_COMMAND_READ_CYCLE		(0x00000001)
+#define MII_MGMT_COMMAND_SCAN_CYCLE		(0x00000002)
+
+#define reg_MII_MGMT_ADDRESS(base)		__REG32(base, 0x00000028)
+#define reg_MII_MGMT_CONTROL(base)		__REG32(base, 0x0000002c)
+#define reg_MII_MGMT_STATUS(base)		__REG32(base, 0x00000030)
+
+#define reg_MII_MGMT_INDICATORS(base)		__REG32(base, 0x00000034)
+#define MII_MGMT_INDICATORS_BUSY		(0x00000001)
+#define MII_MGMT_INDICATORS_SCAN		(0x00000002)
+#define MII_MGMT_INDICATORS_NOT_VALID		(0x00000004)
+
+#define reg_INTERFACE_STATUS(base)		__REG32(base, 0x0000003c)
+#define INTERFACE_STATUS_LINK_FAIL		(0x00000008)
+#define INTERFACE_STATUS_EXCESS_DEFER		(0x00000200)
+
+#define reg_STATION_ADDRESS_1(base)		__REG32(base, 0x00000040)
+#define reg_STATION_ADDRESS_2(base)		__REG32(base, 0x00000044)
+
+#define reg_PORT_CONTROL(base)			__REG32(base, 0x00000200)
+#define PORT_CONTROL_PRI		(0x00000001)
+#define PORT_CONTROL_BPT		(0x00010000)
+#define PORT_CONTROL_SPD		(0x00040000)
+#define PORT_CONTROL_RBC		(0x00080000)
+#define PORT_CONTROL_PRB		(0x00200000)
+#define PORT_CONTROL_DIS		(0x00400000)
+#define PORT_CONTROL_TBI		(0x00800000)
+#define PORT_CONTROL_STE		(0x10000000)
+#define PORT_CONTROL_ZOR		(0x20000000)
+#define PORT_CONTROL_CLR		(0x40000000)
+#define PORT_CONTROL_SRT		(0x80000000)
+
+#define reg_TX_CONFIG(base)		__REG32(base, 0x00000220)
+#define TX_CONFIG_START_Q		(0x00000003)
+#define TX_CONFIG_EHP			(0x00400000)
+#define TX_CONFIG_CHP			(0x00800000)
+#define TX_CONFIG_RST			(0x80000000)
+
+#define reg_TX_CONTROL(base)		__REG32(base, 0x00000224)
+#define TX_CONTROL_GO			(0x00008000)
+#define TX_CONTROL_MP			(0x01000000)
+#define TX_CONTROL_EAI			(0x20000000)
+#define TX_CONTROL_ABT			(0x40000000)
+#define TX_CONTROL_EII			(0x80000000)
+
+#define reg_TX_STATUS(base)		__REG32(base, 0x00000228)
+#define TX_STATUS_QUEUE_USABLE		(0x0000000f)
+#define TX_STATUS_CURR_Q		(0x00000300)
+#define TX_STATUS_ACT			(0x00008000)
+#define TX_STATUS_QUEUE_IDLE		(0x000f0000)
+#define TX_STATUS_EOQ_PENDING		(0x0f000000)
+
+#define reg_TX_EXTENDED_STATUS(base)		__REG32(base, 0x0000022c)
+#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION		(0x0000000f)
+#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION		(0x00000f00)
+#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION	(0x000f0000)
+#define TX_EXTENDED_STATUS_ERROR_FLAG				(0x0f000000)
+
+#define reg_TX_THRESHOLDS(base)			__REG32(base, 0x00000230)
+
+#define reg_TX_DIAGNOSTIC_ADDR(base)           __REG32(base, 0x00000270)
+#define TX_DIAGNOSTIC_ADDR_INDEX		(0x0000007f)
+#define TX_DIAGNOSTIC_ADDR_DFR			(0x40000000)
+#define TX_DIAGNOSTIC_ADDR_AI			(0x80000000)
+
+#define reg_TX_DIAGNOSTIC_DATA(base)		__REG32(base, 0x00000274)
+
+#define reg_TX_ERROR_STATUS(base)		__REG32(base, 0x00000278)
+#define TX_ERROR_STATUS				(0x00000278)
+#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE	(0x0000000f)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_0		(0x00000010)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_0		(0x00000020)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_0		(0x00000040)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_0		(0x00000080)
+#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE	(0x00000f00)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_1		(0x00001000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_1		(0x00002000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_1		(0x00004000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_1		(0x00008000)
+#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE	(0x000f0000)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_2		(0x00100000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_2		(0x00200000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_2		(0x00400000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_2		(0x00800000)
+#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE	(0x0f000000)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_3		(0x10000000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_3		(0x20000000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_3		(0x40000000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_3		(0x80000000)
+
+#define reg_TX_QUEUE_0_CONFIG(base)		__REG32(base, 0x00000280)
+#define TX_QUEUE_0_CONFIG_OCN_PORT		(0x0000003f)
+#define TX_QUEUE_0_CONFIG_BSWP			(0x00000400)
+#define TX_QUEUE_0_CONFIG_WSWP			(0x00000800)
+#define TX_QUEUE_0_CONFIG_AM			(0x00004000)
+#define TX_QUEUE_0_CONFIG_GVI			(0x00008000)
+#define TX_QUEUE_0_CONFIG_EEI			(0x00010000)
+#define TX_QUEUE_0_CONFIG_ELI			(0x00020000)
+#define TX_QUEUE_0_CONFIG_ENI			(0x00040000)
+#define TX_QUEUE_0_CONFIG_ESI			(0x00080000)
+#define TX_QUEUE_0_CONFIG_EDI			(0x00100000)
+
+#define reg_TX_QUEUE_0_BUF_CONFIG(base)		__REG32(base, 0x00000284)
+#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT		(0x0000003f)
+#define TX_QUEUE_0_BUF_CONFIG_BURST		(0x00000300)
+#define TX_QUEUE_0_BUF_CONFIG_BSWP		(0x00000400)
+#define TX_QUEUE_0_BUF_CONFIG_WSWP		(0x00000800)
+
+#define OCN_PORT_HLP			0	/* HLP Interface */
+#define OCN_PORT_PCI_X			1	/* PCI-X Interface */
+#define OCN_PORT_PROCESSOR_MASTER	2	/* Processor Interface (master) */
+#define OCN_PORT_PROCESSOR_SLAVE	3	/* Processor Interface (slave) */
+#define OCN_PORT_MEMORY			4	/* Memory Controller */
+#define OCN_PORT_DMA			5	/* DMA Controller */
+#define OCN_PORT_ETHERNET		6	/* Ethernet Controller */
+#define OCN_PORT_PRINT			7	/* Print Engine Interface */
+
+#define reg_TX_QUEUE_0_PTR_LOW(base)		__REG32(base, 0x00000288)
+
+#define reg_TX_QUEUE_0_PTR_HIGH(base)		__REG32(base, 0x0000028c)
+#define TX_QUEUE_0_PTR_HIGH_VALID		(0x80000000)
+
+#define reg_RX_CONFIG(base)			__REG32(base, 0x00000320)
+#define RX_CONFIG_DEF_Q				(0x00000003)
+#define RX_CONFIG_EMF				(0x00000100)
+#define RX_CONFIG_EUF				(0x00000200)
+#define RX_CONFIG_BFE				(0x00000400)
+#define RX_CONFIG_MFE				(0x00000800)
+#define RX_CONFIG_UFE				(0x00001000)
+#define RX_CONFIG_SE				(0x00002000)
+#define RX_CONFIG_ABF				(0x00200000)
+#define RX_CONFIG_APE				(0x00400000)
+#define RX_CONFIG_CHP				(0x00800000)
+#define RX_CONFIG_RST				(0x80000000)
+
+#define reg_RX_CONTROL(base)			__REG32(base, 0x00000324)
+#define GE_E0_RX_CONTROL_QUEUE_ENABLES		(0x0000000f)
+#define GE_E0_RX_CONTROL_GO			(0x00008000)
+#define GE_E0_RX_CONTROL_EAI			(0x20000000)
+#define GE_E0_RX_CONTROL_ABT			(0x40000000)
+#define GE_E0_RX_CONTROL_EII			(0x80000000)
+
+#define reg_RX_EXTENDED_STATUS(base)		__REG32(base, 0x0000032c)
+#define RX_EXTENDED_STATUS			(0x0000032c)
+#define RX_EXTENDED_STATUS_EOQ			(0x0000000f)
+#define RX_EXTENDED_STATUS_EOQ_0		(0x00000001)
+#define RX_EXTENDED_STATUS_EOF			(0x00000f00)
+#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION	(0x000f0000)
+#define RX_EXTENDED_STATUS_ERROR_FLAG				(0x0f000000)
+
+#define reg_RX_THRESHOLDS(base)			__REG32(base, 0x00000330)
+
+#define reg_RX_DIAGNOSTIC_ADDR(base)		__REG32(base, 0x00000370)
+#define RX_DIAGNOSTIC_ADDR_INDEX		(0x0000007f)
+#define RX_DIAGNOSTIC_ADDR_DFR			(0x40000000)
+#define RX_DIAGNOSTIC_ADDR_AI			(0x80000000)
+
+#define reg_RX_DIAGNOSTIC_DATA(base)		__REG32(base, 0x00000374)
+
+#define reg_RX_QUEUE_0_CONFIG(base)		__REG32(base, 0x00000380)
+#define RX_QUEUE_0_CONFIG_OCN_PORT		(0x0000003f)
+#define RX_QUEUE_0_CONFIG_BSWP			(0x00000400)
+#define RX_QUEUE_0_CONFIG_WSWP			(0x00000800)
+#define RX_QUEUE_0_CONFIG_AM			(0x00004000)
+#define RX_QUEUE_0_CONFIG_EEI			(0x00010000)
+#define RX_QUEUE_0_CONFIG_ELI			(0x00020000)
+#define RX_QUEUE_0_CONFIG_ENI			(0x00040000)
+#define RX_QUEUE_0_CONFIG_ESI			(0x00080000)
+#define RX_QUEUE_0_CONFIG_EDI			(0x00100000)
+
+#define reg_RX_QUEUE_0_BUF_CONFIG(base)		__REG32(base, 0x00000384)
+#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT		(0x0000003f)
+#define RX_QUEUE_0_BUF_CONFIG_BURST		(0x00000300)
+#define RX_QUEUE_0_BUF_CONFIG_BSWP		(0x00000400)
+#define RX_QUEUE_0_BUF_CONFIG_WSWP		(0x00000800)
+
+#define reg_RX_QUEUE_0_PTR_LOW(base)		__REG32(base, 0x00000388)
+
+#define reg_RX_QUEUE_0_PTR_HIGH(base)		__REG32(base, 0x0000038c)
+#define RX_QUEUE_0_PTR_HIGH_VALID		(0x80000000)
+
+/*
+ *  PHY register definitions
+ */
+/* the first 15 PHY registers are standard. */
+#define PHY_CTRL_REG		0	/* Control Register */
+#define PHY_STATUS_REG		1	/* Status Regiser */
+#define PHY_ID1_REG		2	/* Phy Id Reg (word 1) */
+#define PHY_ID2_REG		3	/* Phy Id Reg (word 2) */
+#define PHY_AN_ADV_REG		4	/* Autoneg Advertisement */
+#define PHY_LP_ABILITY_REG	5	/* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP_REG	6	/* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX_REG	7	/* Next Page TX */
+#define PHY_LP_NEXT_PAGE_REG	8	/* Link Partner Next Page */
+#define PHY_1000T_CTRL_REG	9	/* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS_REG	10	/* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS_REG	11	/* Extended Status Reg */
+
+/*
+ * PHY Register bit masks.
+ */
+#define PHY_CTRL_RESET		(1 << 15)
+#define PHY_CTRL_LOOPBACK	(1 << 14)
+#define PHY_CTRL_SPEED0		(1 << 13)
+#define PHY_CTRL_AN_EN		(1 << 12)
+#define PHY_CTRL_PWR_DN		(1 << 11)
+#define PHY_CTRL_ISOLATE	(1 << 10)
+#define PHY_CTRL_RESTART_AN	(1 << 9)
+#define PHY_CTRL_FULL_DUPLEX	(1 << 8)
+#define PHY_CTRL_CT_EN		(1 << 7)
+#define PHY_CTRL_SPEED1		(1 << 6)
+
+#define PHY_STAT_100BASE_T4	(1 << 15)
+#define PHY_STAT_100BASE_X_FD	(1 << 14)
+#define PHY_STAT_100BASE_X_HD	(1 << 13)
+#define PHY_STAT_10BASE_T_FD	(1 << 12)
+#define PHY_STAT_10BASE_T_HD	(1 << 11)
+#define PHY_STAT_100BASE_T2_FD	(1 << 10)
+#define PHY_STAT_100BASE_T2_HD	(1 << 9)
+#define PHY_STAT_EXT_STAT	(1 << 8)
+#define PHY_STAT_RESERVED	(1 << 7)
+#define PHY_STAT_MFPS		(1 << 6)	/* Management Frames Preamble Suppression */
+#define PHY_STAT_AN_COMPLETE	(1 << 5)
+#define PHY_STAT_REM_FAULT	(1 << 4)
+#define PHY_STAT_AN_CAP		(1 << 3)
+#define PHY_STAT_LINK_UP	(1 << 2)
+#define PHY_STAT_JABBER		(1 << 1)
+#define PHY_STAT_EXT_CAP	(1 << 0)
+
+#define TBI_CONTROL_2					0x11
+#define TBI_CONTROL_2_ENABLE_COMMA_DETECT		0x0001
+#define TBI_CONTROL_2_ENABLE_WRAP			0x0002
+#define TBI_CONTROL_2_G_MII_MODE			0x0010
+#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT		0x0020
+#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE		0x0100
+#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY	0x1000
+#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY		0x2000
+#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER			0x4000
+#define TBI_CONTROL_2_SOFT_RESET				0x8000
+
+/* marvel specific */
+#define MV1111_EXT_CTRL1_REG	16	/* PHY Specific Control Reg */
+#define MV1111_SPEC_STAT_REG	17	/* PHY Specific Status Reg */
+#define MV1111_EXT_CTRL2_REG	20	/* Extended PHY Specific Control Reg */
+
+/*
+ * MARVELL 88E1111 PHY register bit masks
+ */
+/* PHY Specific Status Register (MV1111_EXT_CTRL1_REG) */
+
+#define SPEC_STAT_SPEED_MASK	(3 << 14)
+#define SPEC_STAT_FULL_DUP	(1 << 13)
+#define SPEC_STAT_PAGE_RCVD	(1 << 12)
+#define SPEC_STAT_RESOLVED	(1 << 11)	/* Speed and Duplex Resolved */
+#define SPEC_STAT_LINK_UP	(1 << 10)
+#define SPEC_STAT_CABLE_LEN_MASK	(7 << 7)/* Cable Length (100/1000 modes only) */
+#define SPEC_STAT_MDIX		(1 << 6)
+#define SPEC_STAT_POLARITY	(1 << 1)
+#define SPEC_STAT_JABBER	(1 << 0)
+
+#define SPEED_1000		(2 << 14)
+#define SPEED_100		(1 << 14)
+#define SPEED_10		(0 << 14)
+
+#define TBI_ADDR	0x1E	/* Ten Bit Interface address */
+
+/* negotiated link parameters */
+#define LINK_SPEED_UNKNOWN	0
+#define LINK_SPEED_10		1
+#define LINK_SPEED_100		2
+#define LINK_SPEED_1000		3
+
+#define LINK_DUPLEX_UNKNOWN	0
+#define LINK_DUPLEX_HALF	1
+#define LINK_DUPLEX_FULL	2
+
+static unsigned int phy_address[] = { 8, 9 };
+
+#define vuint32 volatile u32
+
+/* TX/RX buffer descriptors. MUST be cache line aligned in memory. (32 byte)
+ * This structure is accessed by the ethernet DMA engine which means it
+ * MUST be in LITTLE ENDIAN format */
+struct dma_descriptor {
+	vuint32 start_addr0;	/* buffer address, least significant bytes. */
+	vuint32 start_addr1;	/* buffer address, most significant bytes. */
+	vuint32 next_descr_addr0;/* next descriptor address, least significant bytes.  Must be 64-bit aligned. */
+	vuint32 next_descr_addr1;/* next descriptor address, most significant bytes. */
+	vuint32 vlan_byte_count;/* VLAN tag(top 2 bytes) and byte countt (bottom 2 bytes). */
+	vuint32 config_status;	/* Configuration/Status. */
+	vuint32 reserved1;	/* reserved to make the descriptor cache line aligned. */
+	vuint32 reserved2;	/* reserved to make the descriptor cache line aligned. */
+};
+
+/* last next descriptor address flag */
+#define DMA_DESCR_LAST		(1 << 31)
+
+/* TX DMA descriptor config status bits */
+#define DMA_DESCR_TX_EOF	(1 <<  0)	/* end of frame */
+#define DMA_DESCR_TX_SOF	(1 <<  1)	/* start of frame */
+#define DMA_DESCR_TX_PFVLAN	(1 <<  2)
+#define DMA_DESCR_TX_HUGE	(1 <<  3)
+#define DMA_DESCR_TX_PAD	(1 <<  4)
+#define DMA_DESCR_TX_CRC	(1 <<  5)
+#define DMA_DESCR_TX_DESCR_INT	(1 << 14)
+#define DMA_DESCR_TX_RETRY_COUNT	0x000F0000
+#define DMA_DESCR_TX_ONE_COLLISION	(1 << 20)
+#define DMA_DESCR_TX_LATE_COLLISION	(1 << 24)
+#define DMA_DESCR_TX_UNDERRUN		(1 << 25)
+#define DMA_DESCR_TX_RETRY_LIMIT	(1 << 26)
+#define DMA_DESCR_TX_OK			(1 << 30)
+#define DMA_DESCR_TX_OWNER		(1 << 31)
+
+/* RX DMA descriptor status bits */
+#define DMA_DESCR_RX_EOF		(1 <<  0)
+#define DMA_DESCR_RX_SOF		(1 <<  1)
+#define DMA_DESCR_RX_VTF		(1 <<  2)
+#define DMA_DESCR_RX_FRAME_IS_TYPE	(1 <<  3)
+#define DMA_DESCR_RX_SHORT_FRAME	(1 <<  4)
+#define DMA_DESCR_RX_HASH_MATCH		(1 <<  7)
+#define DMA_DESCR_RX_BAD_FRAME		(1 <<  8)
+#define DMA_DESCR_RX_OVERRUN		(1 <<  9)
+#define DMA_DESCR_RX_MAX_FRAME_LEN	(1 << 11)
+#define DMA_DESCR_RX_CRC_ERROR		(1 << 12)
+#define DMA_DESCR_RX_DESCR_INT		(1 << 13)
+#define DMA_DESCR_RX_OWNER		(1 << 15)
+
+#define RX_BUFFER_SIZE	PKTSIZE
+#define NUM_RX_DESC	PKTBUFSRX
+
+static struct dma_descriptor tx_descriptor __attribute__ ((aligned(32)));
+
+static struct dma_descriptor rx_descr_array[NUM_RX_DESC]
+	__attribute__ ((aligned(32)));
+
+static struct dma_descriptor *rx_descr_current;
+
+static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis);
+static int tsi108_eth_send (struct eth_device *dev,
+			   volatile void *packet, int length);
+static int tsi108_eth_recv (struct eth_device *dev);
+static void tsi108_eth_halt (struct eth_device *dev);
+static unsigned int read_phy (unsigned int base,
+			     unsigned int phy_addr, unsigned int phy_reg);
+static void write_phy (unsigned int base,
+		      unsigned int phy_addr,
+		      unsigned int phy_reg, unsigned int phy_data);
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print phy debug infomation
+ */
+static void dump_phy_regs (unsigned int phy_addr)
+{
+	int i;
+
+	printf ("PHY %d registers\n", phy_addr);
+	for (i = 0; i <= 30; i++) {
+		printf ("%2d  0x%04x\n", i, read_phy (ETH_BASE, phy_addr, i));
+	}
+	printf ("\n");
+
+}
+#else
+#define dump_phy_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void tx_diag_regs (unsigned int base)
+{
+	int i;
+	unsigned long dummy;
+
+	printf ("TX diagnostics registers\n");
+	reg_TX_DIAGNOSTIC_ADDR(base) = 0x00 | TX_DIAGNOSTIC_ADDR_AI;
+	udelay (1000);
+	dummy = reg_TX_DIAGNOSTIC_DATA(base);
+	for (i = 0x00; i <= 0x05; i++) {
+		udelay (1000);
+		printf ("0x%02x  0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base));
+	}
+	reg_TX_DIAGNOSTIC_ADDR(base) = 0x40 | TX_DIAGNOSTIC_ADDR_AI;
+	udelay (1000);
+	dummy = reg_TX_DIAGNOSTIC_DATA(base);
+	for (i = 0x40; i <= 0x47; i++) {
+		udelay (1000);
+		printf ("0x%02x  0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base));
+	}
+	printf ("\n");
+
+}
+#else
+#define tx_diag_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void rx_diag_regs (unsigned int base)
+{
+	int i;
+	unsigned long dummy;
+
+	printf ("RX diagnostics registers\n");
+	reg_RX_DIAGNOSTIC_ADDR(base) = 0x00 | RX_DIAGNOSTIC_ADDR_AI;
+	udelay (1000);
+	dummy = reg_RX_DIAGNOSTIC_DATA(base);
+	for (i = 0x00; i <= 0x05; i++) {
+		udelay (1000);
+		printf ("0x%02x  0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base));
+	}
+	reg_RX_DIAGNOSTIC_ADDR(base) = 0x40 | RX_DIAGNOSTIC_ADDR_AI;
+	udelay (1000);
+	dummy = reg_RX_DIAGNOSTIC_DATA(base);
+	for (i = 0x08; i <= 0x0a; i++) {
+		udelay (1000);
+		printf ("0x%02x  0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base));
+	}
+	printf ("\n");
+
+}
+#else
+#define rx_diag_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void debug_mii_regs (unsigned int base)
+{
+	printf ("MII_MGMT_CONFIG     0x%08x\n", reg_MII_MGMT_CONFIG(base));
+	printf ("MII_MGMT_COMMAND    0x%08x\n", reg_MII_MGMT_COMMAND(base));
+	printf ("MII_MGMT_ADDRESS    0x%08x\n", reg_MII_MGMT_ADDRESS(base));
+	printf ("MII_MGMT_CONTROL    0x%08x\n", reg_MII_MGMT_CONTROL(base));
+	printf ("MII_MGMT_STATUS     0x%08x\n", reg_MII_MGMT_STATUS(base));
+	printf ("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base));
+	printf ("\n");
+
+}
+#else
+#define debug_mii_regs(base) do{}while(0)
+#endif
+
+/*
+ * Wait until the phy bus is non-busy
+ */
+static void phy_wait (unsigned int base, unsigned int condition)
+{
+	int timeout;
+
+	timeout = 0;
+	while (reg_MII_MGMT_INDICATORS(base) & condition) {
+		udelay (10);
+		if (++timeout > 10000) {
+			printf ("ERROR: timeout waiting for phy bus (%d)\n",
+			       condition);
+			break;
+		}
+	}
+}
+
+/*
+ * read phy register
+ */
+static unsigned int read_phy (unsigned int base,
+			     unsigned int phy_addr, unsigned int phy_reg)
+{
+	unsigned int value;
+
+	phy_wait (base, MII_MGMT_INDICATORS_BUSY);
+
+	reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg;
+
+	/* Ensure that the Read Cycle bit is cleared prior to next read cycle */
+	reg_MII_MGMT_COMMAND(base) = 0;
+
+	/* start the read */
+	reg_MII_MGMT_COMMAND(base) = MII_MGMT_COMMAND_READ_CYCLE;
+
+	/* wait for the read to complete */
+	phy_wait (base,
+		 MII_MGMT_INDICATORS_NOT_VALID | MII_MGMT_INDICATORS_BUSY);
+
+	value = reg_MII_MGMT_STATUS(base);
+
+	reg_MII_MGMT_COMMAND(base) = 0;
+
+	return value;
+}
+
+/*
+ * write phy register
+ */
+static void write_phy (unsigned int base,
+		      unsigned int phy_addr,
+		      unsigned int phy_reg, unsigned int phy_data)
+{
+	phy_wait (base, MII_MGMT_INDICATORS_BUSY);
+
+	reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg;
+
+	/* Ensure that the Read Cycle bit is cleared prior to next cycle */
+	reg_MII_MGMT_COMMAND(base) = 0;
+
+	/* start the write */
+	reg_MII_MGMT_CONTROL(base) = phy_data;
+}
+
+/*
+ * configure the marvell 88e1111 phy
+ */
+static int marvell_88e_phy_config (struct eth_device *dev, int *speed,
+				  int *duplex)
+{
+	unsigned long base;
+	unsigned long phy_addr;
+	unsigned int phy_status;
+	unsigned int phy_spec_status;
+	int timeout;
+	int phy_speed;
+	int phy_duplex;
+	unsigned int value;
+
+	phy_speed = LINK_SPEED_UNKNOWN;
+	phy_duplex = LINK_DUPLEX_UNKNOWN;
+
+	base = dev->iobase;
+	phy_addr = (unsigned long)dev->priv;
+
+	/* Take the PHY out of reset. */
+	write_phy (ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET);
+
+	/* Wait for the reset process to complete. */
+	udelay (10);
+	timeout = 0;
+	while ((phy_status =
+		read_phy (ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) {
+		udelay (10);
+		if (++timeout > 10000) {
+			printf ("ERROR: timeout waiting for phy reset\n");
+			break;
+		}
+	}
+
+	/* TBI Configuration. */
+	write_phy (base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE |
+		  TBI_CONTROL_2_RECEIVE_CLOCK_SELECT);
+	/* Wait for the link to be established. */
+	timeout = 0;
+	do {
+		udelay (20000);
+		phy_status = read_phy (ETH_BASE, phy_addr, PHY_STATUS_REG);
+		if (++timeout > 100) {
+			debug_lev(1, "ERROR: unable to establish link!!!\n");
+			break;
+		}
+	} while ((phy_status & PHY_STAT_LINK_UP) == 0);
+
+	if ((phy_status & PHY_STAT_LINK_UP) == 0)
+		return 0;
+
+	value = 0;
+	phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG);
+	if (phy_spec_status & SPEC_STAT_RESOLVED) {
+		switch (phy_spec_status & SPEC_STAT_SPEED_MASK) {
+		case SPEED_1000:
+			phy_speed = LINK_SPEED_1000;
+			value |= PHY_CTRL_SPEED1;
+			break;
+		case SPEED_100:
+			phy_speed = LINK_SPEED_100;
+			value |= PHY_CTRL_SPEED0;
+			break;
+		case SPEED_10:
+			phy_speed = LINK_SPEED_10;
+			break;
+		}
+		if (phy_spec_status & SPEC_STAT_FULL_DUP) {
+			phy_duplex = LINK_DUPLEX_FULL;
+			value |= PHY_CTRL_FULL_DUPLEX;
+		} else
+			phy_duplex = LINK_DUPLEX_HALF;
+	}
+	/* set TBI speed */
+	write_phy (base, TBI_ADDR, PHY_CTRL_REG, value);
+	write_phy (base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060);
+
+#if TSI108_ETH_DEBUG > 0
+	printf ("%s link is up", dev->name);
+	phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG);
+	if (phy_spec_status & SPEC_STAT_RESOLVED) {
+		switch (phy_speed) {
+		case LINK_SPEED_1000:
+			printf (", 1000 Mbps");
+			break;
+		case LINK_SPEED_100:
+			printf (", 100 Mbps");
+			break;
+		case LINK_SPEED_10:
+			printf (", 10 Mbps");
+			break;
+		}
+		if (phy_duplex == LINK_DUPLEX_FULL)
+			printf (", Full duplex");
+		else
+			printf (", Half duplex");
+	}
+	printf ("\n");
+#endif
+
+	dump_phy_regs (TBI_ADDR);
+	if (speed)
+		*speed = phy_speed;
+	if (duplex)
+		*duplex = phy_duplex;
+
+	return 1;
+}
+
+/*
+ * External interface
+ *
+ * register the tsi108 ethernet controllers with the multi-ethernet system
+ */
+int tsi108_eth_initialize (bd_t * bis)
+{
+	struct eth_device *dev;
+	int index;
+
+	for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) {
+		dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+
+		sprintf (dev->name, "TSI108_eth%d", index);
+
+		dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET);
+		dev->priv = (void *)(phy_address[index]);
+		dev->init = tsi108_eth_probe;
+		dev->halt = tsi108_eth_halt;
+		dev->send = tsi108_eth_send;
+		dev->recv = tsi108_eth_recv;
+
+		eth_register(dev);
+	}
+	return index;
+}
+
+/*
+ * probe for and initialize a single ethernet interface
+ */
+static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis)
+{
+	unsigned long base;
+	unsigned long value;
+	int index;
+	struct dma_descriptor *tx_descr;
+	struct dma_descriptor *rx_descr;
+	int speed;
+	int duplex;
+
+	base = dev->iobase;
+
+	reg_PORT_CONTROL(base) = PORT_CONTROL_STE | PORT_CONTROL_BPT;
+
+	/* Bring DMA/FIFO out of reset. */
+	reg_TX_CONFIG(base) = 0x00000000;
+	reg_RX_CONFIG(base) = 0x00000000;
+
+	reg_TX_THRESHOLDS(base) = (192 << 16) | 192;
+	reg_RX_THRESHOLDS(base) = (192 << 16) | 112;
+
+	/* Bring MAC out of reset. */
+	reg_MAC_CONFIG_1(base) = 0x00000000;
+
+	/* DMA MAC configuration. */
+	reg_MAC_CONFIG_1(base) =
+	    MAC_CONFIG_1_RX_ENABLE | MAC_CONFIG_1_TX_ENABLE;
+
+	reg_MII_MGMT_CONFIG(base) = MII_MGMT_CONFIG_NO_PREAMBLE;
+	reg_MAXIMUM_FRAME_LENGTH(base) = RX_BUFFER_SIZE;
+
+	/* Note: Early tsi108 manual did not have correct byte order
+	 * for the station address.*/
+	reg_STATION_ADDRESS_1(base) = (dev->enetaddr[5] << 24) |
+	    (dev->enetaddr[4] << 16) |
+	    (dev->enetaddr[3] << 8) | (dev->enetaddr[2] << 0);
+
+	reg_STATION_ADDRESS_2(base) = (dev->enetaddr[1] << 24) |
+	    (dev->enetaddr[0] << 16);
+
+	if (marvell_88e_phy_config(dev, &speed, &duplex) == 0)
+		return 0;
+
+	value =
+	    MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC |
+	    MAC_CONFIG_2_CRC_ENABLE;
+	if (speed == LINK_SPEED_1000)
+		value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_BYTE);
+	else {
+		value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_NIBBLE);
+		reg_PORT_CONTROL(base) |= PORT_CONTROL_SPD;
+	}
+	if (duplex == LINK_DUPLEX_FULL) {
+		value |= MAC_CONFIG_2_FULL_DUPLEX;
+		reg_PORT_CONTROL(base) &= ~PORT_CONTROL_BPT;
+	} else
+		reg_PORT_CONTROL(base) |= PORT_CONTROL_BPT;
+	reg_MAC_CONFIG_2(base) = value;
+
+	reg_RX_CONFIG(base) = RX_CONFIG_SE;
+	reg_RX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY;
+	reg_RX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY;
+
+	/* initialize the RX DMA descriptors */
+	rx_descr = &rx_descr_array[0];
+	rx_descr_current = rx_descr;
+	for (index = 0; index < NUM_RX_DESC; index++) {
+		/* make sure the receive buffers are not in cache */
+		invalidate_dcache_range((unsigned long)NetRxPackets[index],
+					(unsigned long)NetRxPackets[index] +
+					RX_BUFFER_SIZE);
+		rx_descr->start_addr0 =
+		    cpu_to_le32((vuint32) NetRxPackets[index]);
+		rx_descr->start_addr1 = 0;
+		rx_descr->next_descr_addr0 =
+		    cpu_to_le32((vuint32) (rx_descr + 1));
+		rx_descr->next_descr_addr1 = 0;
+		rx_descr->vlan_byte_count = 0;
+		rx_descr->config_status = cpu_to_le32((RX_BUFFER_SIZE << 16) |
+						      DMA_DESCR_RX_OWNER);
+		rx_descr++;
+	}
+	rx_descr--;
+	rx_descr->next_descr_addr0 = 0;
+	rx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+	/* Push the descriptors to RAM so the ethernet DMA can see them */
+	invalidate_dcache_range((unsigned long)rx_descr_array,
+				(unsigned long)rx_descr_array +
+				sizeof(rx_descr_array));
+
+	/* enable RX queue */
+	reg_RX_CONTROL(base) = TX_CONTROL_GO | 0x01;
+	reg_RX_QUEUE_0_PTR_LOW(base) = (u32) rx_descr_current;
+	/* enable receive DMA */
+	reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID;
+
+	reg_TX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY;
+	reg_TX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY;
+
+	/* initialize the TX DMA descriptor */
+	tx_descr = &tx_descriptor;
+
+	tx_descr->start_addr0 = 0;
+	tx_descr->start_addr1 = 0;
+	tx_descr->next_descr_addr0 = 0;
+	tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+	tx_descr->vlan_byte_count = 0;
+	tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OK |
+					      DMA_DESCR_TX_SOF |
+					      DMA_DESCR_TX_EOF);
+	/* enable TX queue */
+	reg_TX_CONTROL(base) = TX_CONTROL_GO | 0x01;
+
+	return 1;
+}
+
+/*
+ * send a packet
+ */
+static int tsi108_eth_send (struct eth_device *dev,
+			   volatile void *packet, int length)
+{
+	unsigned long base;
+	int timeout;
+	struct dma_descriptor *tx_descr;
+	unsigned long status;
+
+	base = dev->iobase;
+	tx_descr = &tx_descriptor;
+
+	/* Wait until the last packet has been transmitted. */
+	timeout = 0;
+	do {
+		/* make sure we see the changes made by the DMA engine */
+		invalidate_dcache_range((unsigned long)tx_descr,
+					(unsigned long)tx_descr +
+					sizeof(struct dma_descriptor));
+
+		if (timeout != 0)
+			udelay (15);
+		if (++timeout > 10000) {
+			tx_diag_regs(base);
+			debug_lev(1,
+				  "ERROR: timeout waiting for last transmit packet to be sent\n");
+			return 0;
+		}
+	} while (tx_descr->config_status & cpu_to_le32(DMA_DESCR_TX_OWNER));
+
+	status = le32_to_cpu(tx_descr->config_status);
+	if ((status & DMA_DESCR_TX_OK) == 0) {
+#ifdef TX_PRINT_ERRORS
+		printf ("TX packet error: 0x%08x\n    %s%s%s%s\n", status,
+		       status & DMA_DESCR_TX_OK ? "tx error, " : "",
+		       status & DMA_DESCR_TX_RETRY_LIMIT ?
+		       "retry limit reached, " : "",
+		       status & DMA_DESCR_TX_UNDERRUN ? "underrun, " : "",
+		       status & DMA_DESCR_TX_LATE_COLLISION ? "late collision, "
+		       : "");
+#endif
+	}
+
+	debug_lev (9, "sending packet %d\n", length);
+	tx_descr->start_addr0 = cpu_to_le32((vuint32) packet);
+	tx_descr->start_addr1 = 0;
+	tx_descr->next_descr_addr0 = 0;
+	tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+	tx_descr->vlan_byte_count = cpu_to_le32(length);
+	tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OWNER |
+					      DMA_DESCR_TX_CRC |
+					      DMA_DESCR_TX_PAD |
+					      DMA_DESCR_TX_SOF |
+					      DMA_DESCR_TX_EOF);
+
+	invalidate_dcache_range((unsigned long)tx_descr,
+				(unsigned long)tx_descr +
+				sizeof(struct dma_descriptor));
+
+	invalidate_dcache_range((unsigned long)packet,
+				(unsigned long)packet + length);
+
+	reg_TX_QUEUE_0_PTR_LOW(base) = (u32) tx_descr;
+	reg_TX_QUEUE_0_PTR_HIGH(base) = TX_QUEUE_0_PTR_HIGH_VALID;
+
+	return length;
+}
+
+/*
+ * Check for received packets and send them up the protocal stack
+ */
+static int tsi108_eth_recv (struct eth_device *dev)
+{
+	struct dma_descriptor *rx_descr;
+	unsigned long base;
+	int length = 0;
+	unsigned long status;
+	volatile uchar *buffer;
+
+	base = dev->iobase;
+
+	/* make sure we see the changes made by the DMA engine */
+	invalidate_dcache_range ((unsigned long)rx_descr_array,
+				(unsigned long)rx_descr_array +
+				sizeof(rx_descr_array));
+
+	/* process all of the received packets */
+	rx_descr = rx_descr_current;
+	while ((rx_descr->config_status & cpu_to_le32(DMA_DESCR_RX_OWNER)) == 0) {
+		/* check for error */
+		status = le32_to_cpu(rx_descr->config_status);
+		if (status & DMA_DESCR_RX_BAD_FRAME) {
+#ifdef RX_PRINT_ERRORS
+			printf ("RX packet error: 0x%08x\n    %s%s%s%s%s%s\n",
+			       status,
+			       status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, "
+			       : "",
+			       status & DMA_DESCR_RX_SHORT_FRAME ? "too short, "
+			       : "",
+			       status & DMA_DESCR_RX_BAD_FRAME ? "bad frame, " :
+			       "",
+			       status & DMA_DESCR_RX_OVERRUN ? "overrun, " : "",
+			       status & DMA_DESCR_RX_MAX_FRAME_LEN ?
+			       "max length, " : "",
+			       status & DMA_DESCR_RX_CRC_ERROR ? "CRC error, " :
+			       "");
+#endif
+		} else {
+			length =
+			    le32_to_cpu(rx_descr->vlan_byte_count) & 0xFFFF;
+
+			/*** process packet ***/
+			buffer =
+			    (volatile uchar
+			     *)(le32_to_cpu (rx_descr->start_addr0));
+			NetReceive (buffer, length);
+
+			invalidate_dcache_range ((unsigned long)buffer,
+						(unsigned long)buffer +
+						RX_BUFFER_SIZE);
+		}
+		/* Give this buffer back to the DMA engine */
+		rx_descr->vlan_byte_count = 0;
+		rx_descr->config_status = cpu_to_le32 ((RX_BUFFER_SIZE << 16) |
+						      DMA_DESCR_RX_OWNER);
+		/* move descriptor pointer forward */
+		rx_descr =
+		    (struct dma_descriptor
+		     *)(le32_to_cpu (rx_descr->next_descr_addr0));
+		if (rx_descr == 0)
+			rx_descr = &rx_descr_array[0];
+	}
+	/* remember where we are for next time */
+	rx_descr_current = rx_descr;
+
+	/* If the DMA engine has reached the end of the queue
+	 * start over at the begining */
+	if (reg_RX_EXTENDED_STATUS(base) & RX_EXTENDED_STATUS_EOQ_0) {
+
+		reg_RX_EXTENDED_STATUS(base) = RX_EXTENDED_STATUS_EOQ_0;
+		reg_RX_QUEUE_0_PTR_LOW(base) = (u32) & rx_descr_array[0];
+		reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID;
+	}
+
+	return length;
+}
+
+/*
+ * disable an ethernet interface
+ */
+static void tsi108_eth_halt (struct eth_device *dev)
+{
+	unsigned long base;
+
+	base = dev->iobase;
+
+	/* Put DMA/FIFO into reset state. */
+	reg_TX_CONFIG(base) = TX_CONFIG_RST;
+	reg_RX_CONFIG(base) = RX_CONFIG_RST;
+
+	/* Put MAC into reset state. */
+	reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET;
+}
+
+#endif
diff --git a/drivers/tsi108_i2c.c b/drivers/tsi108_i2c.c
new file mode 100644
index 0000000..eb52cb6
--- /dev/null
+++ b/drivers/tsi108_i2c.c
@@ -0,0 +1,283 @@
+/*
+ * (C) Copyright 2004 Tundra Semiconductor Corp.
+ * Author: Alex Bounine
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+
+#ifdef CONFIG_TSI108_I2C
+#include <tsi108.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+
+#define I2C_DELAY	100000
+#undef  DEBUG_I2C
+
+#ifdef DEBUG_I2C
+#define DPRINT(x) printf (x)
+#else
+#define DPRINT(x)
+#endif
+
+/* All functions assume that Tsi108 I2C block is the only master on the bus */
+/* I2C read helper function */
+
+static int i2c_read_byte (
+		uint i2c_chan,	/* I2C channel number: 0 - main, 1 - SDC SPD */
+		uchar chip_addr,/* I2C device address on the bus */
+		uint byte_addr,	/* Byte address within I2C device */
+		uchar * buffer	/* pointer to data buffer */
+		)
+{
+	u32 temp;
+	u32 to_count = I2C_DELAY;
+	u32 op_status = TSI108_I2C_TIMEOUT_ERR;
+	u32 chan_offset = TSI108_I2C_OFFSET;
+
+	DPRINT (("I2C read_byte() %d 0x%02x 0x%02x\n",
+		i2c_chan, chip_addr, byte_addr));
+
+	if (0 != i2c_chan)
+		chan_offset = TSI108_I2C_SDRAM_OFFSET;
+
+	/* Check if I2C operation is in progress */
+	temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+
+	if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
+			  I2C_CNTRL2_START))) {
+		/* Set device address and operation (read = 0) */
+		temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
+		    ((chip_addr >> 3) & 0x0F);
+		*(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+		    temp;
+
+		/* Issue the read command
+		 * (at this moment all other parameters are 0
+		 * (size = 1 byte, lane = 0)
+		 */
+
+		*(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+		    (I2C_CNTRL2_START);
+
+		/* Wait until operation completed */
+		do {
+			/* Read I2C operation status */
+			temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+
+			if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
+				if (0 == (temp &
+				     (I2C_CNTRL2_I2C_CFGERR |
+				      I2C_CNTRL2_I2C_TO_ERR))
+				    ) {
+					op_status = TSI108_I2C_SUCCESS;
+
+					temp = *(u32 *) (CFG_TSI108_CSR_BASE +
+							 chan_offset +
+							 I2C_RD_DATA);
+
+					*buffer = (u8) (temp & 0xFF);
+				} else {
+					/* report HW error */
+					op_status = TSI108_I2C_IF_ERROR;
+
+					DPRINT (("I2C HW error reported: 0x%02x\n", temp));
+				}
+
+				break;
+			}
+		} while (to_count--);
+	} else {
+		op_status = TSI108_I2C_IF_BUSY;
+
+		DPRINT (("I2C Transaction start failed: 0x%02x\n", temp));
+	}
+
+	DPRINT (("I2C read_byte() status: 0x%02x\n", op_status));
+	return op_status;
+}
+
+/*
+ * I2C Read interface as defined in "include/i2c.h" :
+ *   chip_addr: I2C chip address, range 0..127
+ *                  (to read from SPD channel EEPROM use (0xD0 ... 0xD7)
+ *              NOTE: The bit 7 in the chip_addr serves as a channel select.
+ *              This hack is for enabling "isdram" command on Tsi108 boards
+ *              without changes to common code. Used for I2C reads only.
+ *   byte_addr: Memory or register address within the chip
+ *   alen:      Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:    Pointer to destination buffer for data to be read
+ *   len:       How many bytes to read
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_read (uchar chip_addr, uint byte_addr, int alen,
+		uchar * buffer, int len)
+{
+	u32 op_status = TSI108_I2C_PARAM_ERR;
+	u32 i2c_if = 0;
+
+	/* Hack to support second (SPD) I2C controller (SPD EEPROM read only).*/
+	if (0xD0 == (chip_addr & ~0x07)) {
+		i2c_if = 1;
+		chip_addr &= 0x7F;
+	}
+	/* Check for valid I2C address */
+	if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
+		while (len--) {
+			op_status = i2c_read_byte(i2c_if, chip_addr, byte_addr++, buffer++);
+
+			if (TSI108_I2C_SUCCESS != op_status) {
+				DPRINT (("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len));
+
+				break;
+			}
+		}
+	}
+
+	DPRINT (("I2C read() status: 0x%02x\n", op_status));
+	return op_status;
+}
+
+/* I2C write helper function */
+
+static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
+			  uint byte_addr, /* Byte address within I2C device */
+			  uchar * buffer  /*  pointer to data buffer */
+			  )
+{
+	u32 temp;
+	u32 to_count = I2C_DELAY;
+	u32 op_status = TSI108_I2C_TIMEOUT_ERR;
+
+	/* Check if I2C operation is in progress */
+	temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+
+	if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
+		/* Place data into the I2C Tx Register */
+		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+			  I2C_TX_DATA) = (u32) * buffer;
+
+		/* Set device address and operation  */
+		temp =
+		    I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
+		    ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
+		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+			  I2C_CNTRL1) = temp;
+
+		/* Issue the write command (at this moment all other parameters
+		 * are 0 (size = 1 byte, lane = 0)
+		 */
+
+		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+			  I2C_CNTRL2) = (I2C_CNTRL2_START);
+
+		op_status = TSI108_I2C_TIMEOUT_ERR;
+
+		/* Wait until operation completed */
+		do {
+			/* Read I2C operation status */
+			temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+
+			if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
+				if (0 == (temp &
+				     (I2C_CNTRL2_I2C_CFGERR |
+				      I2C_CNTRL2_I2C_TO_ERR))) {
+					op_status = TSI108_I2C_SUCCESS;
+				} else {
+					/* report detected HW error */
+					op_status = TSI108_I2C_IF_ERROR;
+
+					DPRINT (("I2C HW error reported: 0x%02x\n", temp));
+				}
+
+				break;
+			}
+
+		} while (to_count--);
+	} else {
+		op_status = TSI108_I2C_IF_BUSY;
+
+		DPRINT (("I2C Transaction start failed: 0x%02x\n", temp));
+	}
+
+	return op_status;
+}
+
+/*
+ * I2C Write interface as defined in "include/i2c.h" :
+ *   chip_addr: I2C chip address, range 0..127
+ *   byte_addr: Memory or register address within the chip
+ *   alen:      Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:    Pointer to data to be written
+ *   len:       How many bytes to write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_write (uchar chip_addr, uint byte_addr, int alen, uchar * buffer,
+	      int len)
+{
+	u32 op_status = TSI108_I2C_PARAM_ERR;
+
+	/* Check for valid I2C address */
+	if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
+		while (len--) {
+			op_status =
+			    i2c_write_byte (chip_addr, byte_addr++, buffer++);
+
+			if (TSI108_I2C_SUCCESS != op_status) {
+				DPRINT (("I2C write_byte() failed: 0x%02x (%d left)\n", op_status, len));
+
+				break;
+			}
+		}
+	}
+
+	return op_status;
+}
+
+/*
+ * I2C interface function as defined in "include/i2c.h".
+ * Probe the given I2C chip address by reading single byte from offset 0.
+ * Returns 0 if a chip responded, not 0 on failure.
+ */
+
+int i2c_probe (uchar chip)
+{
+	u32 tmp;
+
+	/*
+	 * Try to read the first location of the chip.
+	 * The Tsi108 HW doesn't support sending just the chip address
+	 * and checkong for an <ACK> back.
+	 */
+	return i2c_read (chip, 0, 1, (char *)&tmp, 1);
+}
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_I2C) */
+#endif /* CONFIG_TSI108_I2C */
diff --git a/drivers/tsi108_pci.c b/drivers/tsi108_pci.c
new file mode 100644
index 0000000..9f606df
--- /dev/null
+++ b/drivers/tsi108_pci.c
@@ -0,0 +1,178 @@
+/*
+ * (C) Copyright 2004 Tundra Semiconductor Corp.
+ * Alex Bounine <alexandreb@tundra.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI initialisation for the Tsi108 EMU board.
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_TSI108_PCI
+
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <tsi108.h>
+
+struct pci_controller local_hose;
+
+void tsi108_clear_pci_error (void)
+{
+	u32 err_stat, err_addr, pci_stat;
+
+	/*
+	 * Quietly clear errors signalled as result of PCI/X configuration read
+	 * requests.
+	 */
+	/* Read PB Error Log Registers */
+	err_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+				     TSI108_PB_REG_OFFSET + PB_ERRCS);
+	err_addr = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+				     TSI108_PB_REG_OFFSET + PB_AERR);
+	if (err_stat & PB_ERRCS_ES) {
+		/* Clear PCI/X bus errors if applicable */
+		if ((err_addr & 0xFF000000) == CFG_PCI_CFG_BASE) {
+			/* Clear error flag */
+			*(u32 *) (CFG_TSI108_CSR_BASE +
+				  TSI108_PB_REG_OFFSET + PB_ERRCS) =
+			    PB_ERRCS_ES;
+
+			/* Clear read error reported in PB_ISR */
+			*(u32 *) (CFG_TSI108_CSR_BASE +
+				  TSI108_PB_REG_OFFSET + PB_ISR) =
+			    PB_ISR_PBS_RD_ERR;
+
+		/* Clear errors reported by PCI CSR (Normally Master Abort) */
+			pci_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+						     TSI108_PCI_REG_OFFSET +
+						     PCI_CSR);
+			*(volatile u32 *)(CFG_TSI108_CSR_BASE +
+					  TSI108_PCI_REG_OFFSET + PCI_CSR) =
+			    pci_stat;
+
+			*(volatile u32 *)(CFG_TSI108_CSR_BASE +
+					  TSI108_PCI_REG_OFFSET +
+					  PCI_IRP_STAT) = PCI_IRP_STAT_P_CSR;
+		}
+	}
+
+	return;
+}
+
+unsigned int __get_pci_config_dword (u32 addr)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__ ("       lwbrx %0,0,%1\n"
+			     "1:     eieio\n"
+			     "2:\n"
+			     ".section .fixup,\"ax\"\n"
+			     "3:     li %0,-1\n"
+			     "       b 2b\n"
+			     ".section __ex_table,\"a\"\n"
+			     "       .align 2\n"
+			     "       .long 1b,3b\n"
+			     ".text":"=r"(retval):"r"(addr));
+
+	return (retval);
+}
+
+static int tsi108_read_config_dword (struct pci_controller *hose,
+				    pci_dev_t dev, int offset, u32 * value)
+{
+	dev &= (CFG_PCI_CFG_SIZE - 1);
+	dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+	*value = __get_pci_config_dword(dev);
+	if (0xFFFFFFFF == *value)
+		tsi108_clear_pci_error ();
+	return 0;
+}
+
+static int tsi108_write_config_dword (struct pci_controller *hose,
+				     pci_dev_t dev, int offset, u32 value)
+{
+	dev &= (CFG_PCI_CFG_SIZE - 1);
+	dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+
+	out_le32 ((volatile unsigned *)dev, value);
+
+	return 0;
+}
+
+void pci_init_board (void)
+{
+	struct pci_controller *hose = (struct pci_controller *)&local_hose;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	pci_set_region (hose->regions + 0,
+		       CFG_PCI_MEMORY_BUS,
+		       CFG_PCI_MEMORY_PHYS,
+		       CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+	/* PCI memory space */
+	pci_set_region (hose->regions + 1,
+		       CFG_PCI_MEM_BUS,
+		       CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM);
+
+	/* PCI I/O space */
+	pci_set_region (hose->regions + 2,
+		       CFG_PCI_IO_BUS,
+		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+
+	hose->region_count = 3;
+
+	pci_set_ops (hose,
+		    pci_hose_read_config_byte_via_dword,
+		    pci_hose_read_config_word_via_dword,
+		    tsi108_read_config_dword,
+		    pci_hose_write_config_byte_via_dword,
+		    pci_hose_write_config_word_via_dword,
+		    tsi108_write_config_dword);
+
+	pci_register_hose (hose);
+
+	hose->last_busno = pci_hose_scan (hose);
+
+	debug ("Done PCI initialization\n");
+	return;
+}
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup (void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+	p = (u32 *)ft_get_prop (blob, "/" OF_TSI "/pci@1000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = local_hose.first_busno;
+		p[1] = local_hose.last_busno;
+	}
+
+}
+#endif
+
+#endif	/* CONFIG_TSI108_PCI */