Add support for a Freescale non-CPM SPI controller

This patch adds support for the SPI controller found on Freescale PowerPC
processors such as the MCP834x family.  Additionally, a new config option,
CONFIG_HARD_SPI, is added for general purpose SPI controller use.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

2 files changed, 184 insertions, 0 deletions

diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
new file mode 100644
index 0000000..6b3898b
--- /dev/null
+++ b/drivers/spi/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libspi.a
+
+COBJS-y += mpc8xxx_spi.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
new file mode 100644
index 0000000..18e68d3
--- /dev/null
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (c) 2006 Ben Warren, Qstreams Networks Inc.
+ * With help from the common/soft_spi and cpu/mpc8260 drivers
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <asm/mpc8xxx_spi.h>
+
+#ifdef CONFIG_HARD_SPI
+
+#define SPI_EV_NE	0x80000000 >> 22	/* Receiver Not Empty */
+#define SPI_EV_NF	0x80000000 >> 23	/* Transmitter Not Full */
+
+#define SPI_MODE_LOOP	0x80000000 >> 1	/* Loopback mode */
+#define SPI_MODE_REV	0x80000000 >> 5	/* Reverse mode - MSB first */
+#define SPI_MODE_MS	0x80000000 >> 6	/* Always master */
+#define SPI_MODE_EN	0x80000000 >> 7	/* Enable interface */
+
+#define SPI_PRESCALER(reg, div) (reg)=((reg) & 0xfff0ffff) | ((div)<<16)
+#define SPI_CHARLENGTH(reg, div) (reg)=((reg) & 0xff0fffff) | ((div)<<20)
+
+#define SPI_TIMEOUT	1000
+
+void spi_init(void)
+{
+	volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+
+	/* ------------------------------------------------
+	 * SPI pins on the MPC83xx are not muxed, so all we do is initialize
+	 * some registers
+	 * ------------------------------------------------ */
+	spi->mode = SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN;
+	SPI_PRESCALER(spi->mode, 1);	/* Use SYSCLK / 8  (16.67MHz typ.) */
+	spi->event = 0xffffffff;	/* Clear all SPI events */
+	spi->mask = 0x00000000;	/* Mask  all SPI interrupts */
+	spi->com = 0;		/* LST bit doesn't do anything, so disregard */
+}
+
+int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar * dout, uchar * din)
+{
+	volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+	unsigned int tmpdout, tmpdin, event;
+	int numBlks = bitlen / 32 + (bitlen % 32 ? 1 : 0);
+	int tm, isRead = 0;
+	unsigned char charSize = 32;
+
+	debug("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
+	      (int)chipsel, *(uint *) dout, *(uint *) din, bitlen);
+
+	if (chipsel != NULL)
+		(*chipsel) (1);	/* select the target chip */
+
+	spi->event = 0xffffffff;	/* Clear all SPI events */
+
+	/* handle data in 32-bit chunks */
+	while (numBlks--) {
+		tmpdout = 0;
+		charSize = (bitlen >= 32 ? 32 : bitlen);
+
+		/* Shift data so it's msb-justified */
+		tmpdout = *(u32 *) dout >> (32 - charSize);
+
+		/* The LEN field of the SPMODE register is set as follows:
+		 *
+		 * Bit length           setting
+		 * l <= 4               3
+		 * 4 < l <= 16          l - 1
+		 * l > 16               0
+		 */
+
+		if (bitlen <= 16)
+			SPI_CHARLENGTH(spi->mode, bitlen <= 4 ? 3 : bitlen - 1);
+		else {
+			SPI_CHARLENGTH(spi->mode, 0);
+			/* Set up the next iteration if sending > 32 bits */
+			bitlen -= 32;
+			dout += 4;
+		}
+
+		spi->tx = tmpdout;	/* Write the data out */
+		debug("*** spi_xfer: ... %08x written\n", tmpdout);
+
+		/* --------------------------------
+		 * Wait for SPI transmit to get out
+		 * or time out (1 second = 1000 ms)
+		 * The NE event must be read and cleared first
+		 * -------------------------------- */
+		for (tm = 0, isRead = 0; tm < SPI_TIMEOUT; ++tm) {
+			event = spi->event;
+			if (event & SPI_EV_NE) {
+				tmpdin = spi->rx;
+				spi->event |= SPI_EV_NE;
+				isRead = 1;
+
+				*(u32 *) din = (tmpdin << (32 - charSize));
+				if (charSize == 32) {
+					/* Advance output buffer by 32 bits */
+					din += 4;
+				}
+			}
+			/* Only bail when we've had both NE and NF events.
+			 * This will cause timeouts on RO devices, so maybe
+			 * in the future put an arbitrary delay after writing
+			 * the device.  Arbitrary delays suck, though... */
+			if (isRead && (event & SPI_EV_NF))
+				break;
+		}
+		if (tm >= SPI_TIMEOUT)
+			puts("*** spi_xfer: Time out during SPI transfer");
+
+		debug("*** spi_xfer: transfer ended. Value=%08x\n", tmpdin);
+	}
+
+	if (chipsel != NULL)
+		(*chipsel) (0);	/* deselect the target chip */
+	return 0;
+}
+
+#endif				/* CONFIG_HARD_SPI */