Merge git://git.denx.de/u-boot-marvell

3 files changed, 56 insertions, 8 deletions

diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index a57f674..0d19dd2 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -299,9 +299,6 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
 
 		writel(1 << i, mmio + HOST_IRQ_STAT);
 
-		/* set irq mask (enables interrupts) */
-		writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
-
 		/* register linkup ports */
 		tmp = readl(port_mmio + PORT_SCR_STAT);
 		debug("SATA port %d status: 0x%x\n", i, tmp);
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 75556a3..d89e302 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -13,7 +13,11 @@
 #include <mmc.h>
 #include <sdhci.h>
 
+#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
+void *aligned_buffer = (void *)CONFIG_FIXED_SDHCI_ALIGNED_BUFFER;
+#else
 void *aligned_buffer;
+#endif
 
 static void sdhci_reset(struct sdhci_host *host, u8 mask)
 {
@@ -133,8 +137,8 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 	int trans_bytes = 0, is_aligned = 1;
 	u32 mask, flags, mode;
 	unsigned int time = 0, start_addr = 0;
-	unsigned int retry = 10000;
 	int mmc_dev = mmc->block_dev.dev;
+	unsigned start = get_timer(0);
 
 	/* Timeout unit - ms */
 	static unsigned int cmd_timeout = CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT;
@@ -205,6 +209,17 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 				memcpy(aligned_buffer, data->src, trans_bytes);
 		}
 
+#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
+		/*
+		 * Always use this bounce-buffer when
+		 * CONFIG_FIXED_SDHCI_ALIGNED_BUFFER is defined
+		 */
+		is_aligned = 0;
+		start_addr = (unsigned long)aligned_buffer;
+		if (data->flags != MMC_DATA_READ)
+			memcpy(aligned_buffer, data->src, trans_bytes);
+#endif
+
 		sdhci_writel(host, start_addr, SDHCI_DMA_ADDRESS);
 		mode |= SDHCI_TRNS_DMA;
 #endif
@@ -222,15 +237,15 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 	flush_cache(start_addr, trans_bytes);
 #endif
 	sdhci_writew(host, SDHCI_MAKE_CMD(cmd->cmdidx, flags), SDHCI_COMMAND);
+	start = get_timer(0);
 	do {
 		stat = sdhci_readl(host, SDHCI_INT_STATUS);
 		if (stat & SDHCI_INT_ERROR)
 			break;
-		if (--retry == 0)
-			break;
-	} while ((stat & mask) != mask);
+	} while (((stat & mask) != mask) &&
+		 (get_timer(start) < CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT));
 
-	if (retry == 0) {
+	if (get_timer(start) >= CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT) {
 		if (host->quirks & SDHCI_QUIRK_BROKEN_R1B)
 			return 0;
 		else {
diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c
index 1a5fd6e..03c489c 100644
--- a/drivers/usb/host/ehci-marvell.c
+++ b/drivers/usb/host/ehci-marvell.c
@@ -10,6 +10,7 @@
 #include <asm/io.h>
 #include <usb.h>
 #include "ehci.h"
+#include <linux/mbus.h>
 #include <asm/arch/cpu.h>
 
 #if defined(CONFIG_KIRKWOOD)
@@ -30,6 +31,40 @@ DECLARE_GLOBAL_DATA_PTR;
 /*
  * USB 2.0 Bridge Address Decoding registers setup
  */
+#ifdef CONFIG_ARMADA_XP
+
+#define MVUSB0_BASE		MVEBU_USB20_BASE
+
+/*
+ * Once all the older Marvell SoC's (Orion, Kirkwood) are converted
+ * to the common mvebu archticture including the mbus setup, this
+ * will be the only function needed to configure the access windows
+ */
+static void usb_brg_adrdec_setup(void)
+{
+	const struct mbus_dram_target_info *dram;
+	int i;
+
+	dram = mvebu_mbus_dram_info();
+
+	for (i = 0; i < 4; i++) {
+		wrl(USB_WINDOW_CTRL(i), 0);
+		wrl(USB_WINDOW_BASE(i), 0);
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+
+		/* Write size, attributes and target id to control register */
+		wrl(USB_WINDOW_CTRL(i),
+		    ((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
+		    (dram->mbus_dram_target_id << 4) | 1);
+
+		/* Write base address to base register */
+		wrl(USB_WINDOW_BASE(i), cs->base);
+	}
+}
+#else
 static void usb_brg_adrdec_setup(void)
 {
 	int i;
@@ -69,6 +104,7 @@ static void usb_brg_adrdec_setup(void)
 		wrl(USB_WINDOW_BASE(i), base);
 	}
 }
+#endif
 
 /*
  * Create the appropriate control structures to manage