mpc8xx: remove RPXlite_dw, quantum board support

These boards are old enough and have no maintainers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

4 files changed, 0 insertions, 89 deletions

diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index ae3cafb..91821f4 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -7,7 +7,6 @@
 
 obj-$(CONFIG_I82365) += i82365.o
 obj-$(CONFIG_8xx) += mpc8xx_pcmcia.o
-obj-y += rpx_pcmcia.o
 obj-$(CONFIG_IDE_TI_CARDBUS) += ti_pci1410a.o
 obj-y += tqm8xx_pcmcia.o
 obj-$(CONFIG_MARUBUN_PCCARD) += marubun_pcmcia.o
diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c
index 6638277..af77426 100644
--- a/drivers/pcmcia/mpc8xx_pcmcia.c
+++ b/drivers/pcmcia/mpc8xx_pcmcia.c
@@ -211,16 +211,6 @@ static u_int m8xx_get_graycode(u_int size)
 
 #if	0
 
-#if defined(CONFIG_RPXLITE)
-
-/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
- * SYPCR is write once only, therefore must the slowest memory be faster
- * than the bus monitor or we will get a machine check due to the bus timeout.
- */
-#undef	PCMCIA_BMT_LIMIT
-#define	PCMCIA_BMT_LIMIT (6*8)
-#endif
-
 static u_int m8xx_get_speed(u_int ns, u_int is_io)
 {
 	u_int reg, clocks, psst, psl, psht;
diff --git a/drivers/pcmcia/rpx_pcmcia.c b/drivers/pcmcia/rpx_pcmcia.c
deleted file mode 100644
index 5b24f0b..0000000
--- a/drivers/pcmcia/rpx_pcmcia.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* -------------------------------------------------------------------- */
-/* RPX Boards from Embedded Planet					*/
-/* -------------------------------------------------------------------- */
-#include <common.h>
-#ifdef CONFIG_8xx
-#include <mpc8xx.h>
-#endif
-#include <pcmcia.h>
-
-#undef	CONFIG_PCMCIA
-
-#if defined(CONFIG_CMD_PCMCIA)
-#define	CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define	CONFIG_PCMCIA
-#endif
-
-#if	defined(CONFIG_PCMCIA)	\
-	&& defined(CONFIG_RPXLITE)
-
-#define	PCMCIA_BOARD_MSG	"RPX CLASSIC or RPX LITE"
-
-int pcmcia_voltage_set(int slot, int vcc, int vpp)
-{
-	u_long reg = 0;
-
-	switch(vcc) {
-		case 0: break;
-		case 33: reg |= BCSR1_PCVCTL4; break;
-		case 50: reg |= BCSR1_PCVCTL5; break;
-		default: return 1;
-	}
-
-	switch(vpp) {
-		case 0: break;
-		case 33:
-		case 50:
-			if(vcc == vpp)
-				reg |= BCSR1_PCVCTL6;
-			else
-				return 1;
-			break;
-		case 120:
-			reg |= BCSR1_PCVCTL7;
-			default: return 1;
-	}
-
-	/* first, turn off all power */
-	*((uint *)RPX_CSR_ADDR) &= ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5
-			| BCSR1_PCVCTL6 | BCSR1_PCVCTL7);
-
-	/* enable new powersettings */
-	*((uint *)RPX_CSR_ADDR) |= reg;
-
-	return 0;
-}
-
-int pcmcia_hardware_enable (int slot)
-{
-	return 0;	/* No hardware to enable */
-}
-
-#if defined(CONFIG_CMD_PCMCIA)
-static int pcmcia_hardware_disable(int slot)
-{
-	return 0;	/* No hardware to disable */
-}
-#endif
-
-
-#endif	/* CONFIG_PCMCIA && CONFIG_RPXLITE */
diff --git a/drivers/video/mpc8xx_lcd.c b/drivers/video/mpc8xx_lcd.c
index fceed87..b6062f9 100644
--- a/drivers/video/mpc8xx_lcd.c
+++ b/drivers/video/mpc8xx_lcd.c
@@ -268,11 +268,6 @@ void lcd_ctrl_init (void *lcdbase)
 	 * the controller.
 	 */
 
-#ifdef CONFIG_RPXLITE
-	/* This is special for RPXlite_DW Software Development Platform **[Sam]** */
-	panel_info.vl_dp = CONFIG_SYS_LOW;
-#endif
-
 	lccrtmp  = LCDBIT (LCCR_BNUM_BIT,
 		   (((panel_info.vl_row * panel_info.vl_col) * (1 << LCD_BPP)) / 128));