diff options
| author | Codrin Ciubotariu <codrin.ciubotariu@nxp.com> | 2016-03-14 13:46:52 +0200 |
|---|---|---|
| committer | York Sun <york.sun@nxp.com> | 2016-04-06 08:34:18 -0700 |
| commit | 02c00f265da0d85e81fb74f6aabfc4295d49ff56 (patch) | |
| tree | a79770f8798fe7cda05ad13f549ac9437c1a5c90 /drivers | |
| parent | 5330c7d707f1117a95985ff6e770eb146703706a (diff) | |
| download | u-boot-imx-02c00f265da0d85e81fb74f6aabfc4295d49ff56.zip u-boot-imx-02c00f265da0d85e81fb74f6aabfc4295d49ff56.tar.gz u-boot-imx-02c00f265da0d85e81fb74f6aabfc4295d49ff56.tar.bz2 | |
drivers: net: vsc9953: Do not configure disabled ports
Some SerDes protocols might not enable all l2switch ports. In this case,
these ports should not be configured to perform Rx/Tx operations.
This also fixes an issue when flooded frames were also switched to
disabled ports and frames start to accumulate, consuming memory
and eventually causing head-of-line blocking for other frames.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/vsc9953.c | 12 |
1 files changed, 8 insertions, 4 deletions
diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c index 44afe14..4b3b811 100644 --- a/drivers/net/vsc9953.c +++ b/drivers/net/vsc9953.c @@ -2525,6 +2525,9 @@ void vsc9953_init(bd_t *bis) if (vsc9953_port_init(i)) printf("Failed to initialize l2switch port %d\n", i); + if (!vsc9953_l2sw.port[i].enabled) + continue; + /* Enable VSC9953 GMII Ports Port ID 0 - 7 */ if (VSC9953_INTERNAL_PORT_CHECK(i)) { out_le32(&l2ana_reg->pfc[i].pfc_cfg, @@ -2537,6 +2540,11 @@ void vsc9953_init(bd_t *bis) out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], VSC9953_MAC_FC_CFG); } + + l2dev_gmii_reg = (struct vsc9953_dev_gmii *) + (VSC9953_OFFSET + VSC9953_DEV_GMII_OFFSET + + T1040_SWITCH_GMII_DEV_OFFSET * i); + out_le32(&l2dev_gmii_reg->port_mode.clock_cfg, VSC9953_CLOCK_CFG); out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg, @@ -2559,10 +2567,6 @@ void vsc9953_init(bd_t *bis) /* WAIT FOR 2 us*/ udelay(2); - l2dev_gmii_reg = (struct vsc9953_dev_gmii *)( - (char *)l2dev_gmii_reg - + T1040_SWITCH_GMII_DEV_OFFSET); - /* Initialize Lynx PHY Wrappers */ phy_addr = 0; if (vsc9953_l2sw.port[i].enet_if == |