ehci-omap: driver for EHCI host on OMAP3

Taken from Beagle code. Tested on mcx board (AM3517-based).

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Tested-by: Stefano Babic <sbabic@denx.de>

2 files changed, 157 insertions, 0 deletions

diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 7ba36ca..7c4df53 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -43,6 +43,7 @@ endif
 COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
 COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
 COBJS-$(CONFIG_USB_EHCI_MX5) += ehci-mx5.o
+COBJS-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
 COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
 COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
new file mode 100644
index 0000000..93d3bb7
--- /dev/null
+++ b/drivers/usb/host/ehci-omap.c
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2011 Ilya Yanok, Emcraft Systems
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Derived from Beagle Board code by
+ *	Sunil Kumar <sunilsaini05@gmail.com>
+ *	Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+#include <common.h>
+#include <usb.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/clocks_omap3.h>
+#include <asm/arch/ehci_omap3.h>
+#include <asm/arch/sys_proto.h>
+#include "ehci-core.h"
+
+inline int __board_usb_init(void)
+{
+	return 0;
+}
+int board_usb_init(void) __attribute__((weak, alias("__board_usb_init")));
+
+#if defined(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO) || \
+	defined(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO)
+/* controls PHY(s) reset signal(s) */
+static inline void omap_ehci_phy_reset(int on, int delay)
+{
+	/*
+	 * Refer ISSUE1:
+	 * Hold the PHY in RESET for enough time till
+	 * PHY is settled and ready
+	 */
+	if (delay && !on)
+		udelay(delay);
+#ifdef CONFIG_OMAP_EHCI_PHY1_RESET_GPIO
+	gpio_request(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, "USB PHY1 reset");
+	gpio_direction_output(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, !on);
+#endif
+#ifdef CONFIG_OMAP_EHCI_PHY2_RESET_GPIO
+	gpio_request(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO, "USB PHY2 reset");
+	gpio_direction_output(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO, !on);
+#endif
+
+	/* Hold the PHY in RESET for enough time till DIR is high */
+	/* Refer: ISSUE1 */
+	if (delay && on)
+		udelay(delay);
+}
+#else
+#define omap_ehci_phy_reset(on, delay)	do {} while (0)
+#endif
+
+/* Reset is needed otherwise the kernel-driver will throw an error. */
+int ehci_hcd_stop(void)
+{
+	debug("Resetting OMAP3 EHCI\n");
+	omap_ehci_phy_reset(1, 0);
+	writel(OMAP_UHH_SYSCONFIG_SOFTRESET,
+			OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
+	/* disable USB clocks */
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	sr32(&prcm_base->iclken_usbhost, 0, 1, 0);
+	sr32(&prcm_base->fclken_usbhost, 0, 2, 0);
+	sr32(&prcm_base->iclken3_core, 2, 1, 0);
+	sr32(&prcm_base->fclken3_core, 2, 1, 0);
+	return 0;
+}
+
+/*
+ * Initialize the OMAP3 EHCI controller and PHY.
+ * Based on "drivers/usb/host/ehci-omap.c" from Linux 2.6.37.
+ * See there for additional Copyrights.
+ */
+int ehci_hcd_init(void)
+{
+	int ret;
+
+	debug("Initializing OMAP3 EHCI\n");
+
+	ret = board_usb_init();
+	if (ret < 0)
+		return ret;
+
+	/* Put the PHY in RESET */
+	omap_ehci_phy_reset(1, 10);
+
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	/* Enable USBHOST_L3_ICLK (USBHOST_MICLK) */
+	sr32(&prcm_base->iclken_usbhost, 0, 1, 1);
+	/*
+	 * Enable USBHOST_48M_FCLK (USBHOST_FCLK1)
+	 * and USBHOST_120M_FCLK (USBHOST_FCLK2)
+	 */
+	sr32(&prcm_base->fclken_usbhost, 0, 2, 3);
+	/* Enable USBTTL_ICLK */
+	sr32(&prcm_base->iclken3_core, 2, 1, 1);
+	/* Enable USBTTL_FCLK */
+	sr32(&prcm_base->fclken3_core, 2, 1, 1);
+	debug("USB clocks enabled\n");
+
+	/* perform TLL soft reset, and wait until reset is complete */
+	writel(OMAP_USBTLL_SYSCONFIG_SOFTRESET,
+		OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
+	/* Wait for TLL reset to complete */
+	while (!(readl(OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSSTATUS)
+			& OMAP_USBTLL_SYSSTATUS_RESETDONE))
+		;
+	debug("TLL reset done\n");
+
+	writel(OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
+		OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
+		OMAP_USBTLL_SYSCONFIG_CACTIVITY,
+		OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
+
+	/* Put UHH in NoIdle/NoStandby mode */
+	writel(OMAP_UHH_SYSCONFIG_ENAWAKEUP
+		| OMAP_UHH_SYSCONFIG_SIDLEMODE
+		| OMAP_UHH_SYSCONFIG_CACTIVITY
+		| OMAP_UHH_SYSCONFIG_MIDLEMODE,
+		OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
+
+	/* setup burst configurations */
+	writel(OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
+		| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
+		| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN,
+		OMAP3_UHH_BASE + OMAP_UHH_HOSTCONFIG);
+
+	omap_ehci_phy_reset(0, 10);
+
+	hccr = (struct ehci_hccr *)(OMAP3_EHCI_BASE);
+	hcor = (struct ehci_hcor *)(OMAP3_EHCI_BASE + 0x10);
+
+	debug("OMAP3 EHCI init done\n");
+	return 0;
+}