diff options
| author | Vipin KUMAR <vipin.kumar@st.com> | 2012-05-07 13:00:19 +0530 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-07-07 14:07:38 +0200 |
| commit | f3fcf92d595b297b47a1b58b8ec39f93f40ef912 (patch) | |
| tree | f7993a0d0efaac1ea918b75503baa373418e119b /drivers | |
| parent | 0def98e7be905e4e02eb22cb312bb4e3b327d2fa (diff) | |
| download | u-boot-imx-f3fcf92d595b297b47a1b58b8ec39f93f40ef912.zip u-boot-imx-f3fcf92d595b297b47a1b58b8ec39f93f40ef912.tar.gz u-boot-imx-f3fcf92d595b297b47a1b58b8ec39f93f40ef912.tar.bz2 | |
st_smi: Add support for SPEAr SMI driver
SMI is the serial memory interface controller provided by ST.
Earlier, a driver exists in the u-boot source code for the SMI IP. However, it
was specific to spear platforms. This commit converts the same driver to a more
generic driver. As a result, the driver files are renamed to st_smi.c and
st_smi.h and moved into drivers/mtd folder for reusability by other platforms
using smi controller peripheral.
Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mtd/st_smi.c (renamed from drivers/mtd/spr_smi.c) | 7 |
2 files changed, 5 insertions, 4 deletions
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 5a5ecdf..543c845 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -35,7 +35,7 @@ COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o COBJS-$(CONFIG_FTSMC020) += ftsmc020.o COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.o -COBJS-$(CONFIG_SPEARSMI) += spr_smi.o +COBJS-$(CONFIG_ST_SMI) += st_smi.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mtd/spr_smi.c b/drivers/mtd/st_smi.c index 6d4257a..db08ab9 100644 --- a/drivers/mtd/spr_smi.c +++ b/drivers/mtd/st_smi.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2009 - * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * Vipin Kumar, ST Microelectronics, vipin.kumar@st.com. * * See file CREDITS for list of people who contributed to this * project. @@ -24,10 +24,10 @@ #include <common.h> #include <flash.h> #include <linux/err.h> +#include <linux/mtd/st_smi.h> #include <asm/io.h> #include <asm/arch/hardware.h> -#include <asm/arch/spr_smi.h> #if !defined(CONFIG_SYS_NO_FLASH) @@ -82,6 +82,7 @@ static unsigned int smi_read_id(flash_info_t *info, int banknum) writel(READ_ID, &smicntl->smi_tr); writel((banknum << BANKSEL_SHIFT) | SEND | TX_LEN_1 | RX_LEN_3, &smicntl->smi_cr2); + smi_wait_xfer_finish(XFER_FINISH_TOUT); value = (readl(&smicntl->smi_rr) & 0x00FFFFFF); @@ -232,7 +233,7 @@ static int smi_write_enable(int bank) * * SMI initialization routine. Sets SMI control register1. */ -static void smi_init(void) +void smi_init(void) { /* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */ writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4, |