Merge branch 'next' of git://git.denx.de/u-boot-video into next

2 files changed, 51 insertions, 3 deletions

diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index fbc4df9..16d6689 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -146,9 +146,11 @@ CONFIG_VIDEO_HW_CURSOR:	     - Uses the hardware cursor capability of the
 #ifdef CONFIG_VIDEO_CORALP
 #define VIDEO_FB_LITTLE_ENDIAN
 #endif
+#ifdef CONFIG_VIDEO_MB862xx_ACCEL
 #define VIDEO_HW_RECTFILL
 #define VIDEO_HW_BITBLT
 #endif
+#endif
 
 /*****************************************************************************/
 /* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc	     */
@@ -319,7 +321,7 @@ void	console_cursor (int state);
 #else
 #define SWAP16(x)	 (x)
 #define SWAP32(x)	 (x)
-#if defined(VIDEO_FB_16BPP_PIXEL_SWAP)
+#if defined(VIDEO_FB_16BPP_WORD_SWAP)
 #define SHORTSWAP32(x)	 ( ((x) >> 16) | ((x) << 16) )
 #else
 #define SHORTSWAP32(x)	 (x)
diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c
index a8676cc..edf34aa 100644
--- a/drivers/video/mb862xx.c
+++ b/drivers/video/mb862xx.c
@@ -89,6 +89,7 @@ unsigned int fr_div[] = { 0x00000f00, 0x00000900, 0x00000500 };
 				       (GC_DISP_BASE | GC_L0PAL0) + \
 				       ((idx) << 2)), (val))
 
+#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
 static void gdc_sw_reset (void)
 {
 	GraphicDevice *dev = &mb862xx;
@@ -129,6 +130,7 @@ static void de_wait_slots (int slots)
 			break;
 		}
 }
+#endif
 
 #if !defined(CONFIG_VIDEO_CORALP)
 static void board_disp_init (void)
@@ -144,11 +146,13 @@ static void board_disp_init (void)
 #endif
 
 /*
- * Init drawing engine
+ * Init drawing engine if accel enabled.
+ * Also clears visible framebuffer.
  */
 static void de_init (void)
 {
 	GraphicDevice *dev = &mb862xx;
+#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
 	int cf = (dev->gdfBytesPP == 1) ? 0x0000 : 0x8000;
 
 	dev->dprBase = dev->frameAdrs + GC_DRAW_BASE;
@@ -174,6 +178,14 @@ static void de_init (void)
 	DE_WR_FIFO (dev->winSizeY << 16 | dev->winSizeX);
 	/* sync with SW access to framebuffer */
 	de_wait ();
+#else
+	unsigned int i, *p;
+
+	i = dev->winSizeX * dev->winSizeY;
+	p = (unsigned int *)dev->frameAdrs;
+	while (i--)
+		*p++ = 0;
+#endif
 }
 
 #if defined(CONFIG_VIDEO_CORALP)
@@ -340,6 +352,30 @@ unsigned int card_init (void)
 }
 #endif
 
+
+#if !defined(CONFIG_VIDEO_CORALP)
+int mb862xx_probe(unsigned int addr)
+{
+	GraphicDevice *dev = &mb862xx;
+	unsigned int reg;
+
+	dev->frameAdrs = addr;
+	dev->dprBase = dev->frameAdrs + GC_DRAW_BASE;
+
+	/* Try to access GDC ID/Revision registers */
+	reg = HOST_RD_REG (GC_CID);
+	reg = HOST_RD_REG (GC_CID);
+	if (reg == 0x303) {
+		reg = DE_RD_REG(GC_REV);
+		reg = DE_RD_REG(GC_REV);
+		if ((reg & ~0xff) == 0x20050100)
+			return MB862XX_TYPE_LIME;
+	}
+
+	return 0;
+}
+#endif
+
 void *video_hw_init (void)
 {
 	GraphicDevice *dev = &mb862xx;
@@ -359,8 +395,16 @@ void *video_hw_init (void)
 	if ((dev->frameAdrs = board_video_init ()) == 0) {
 		puts ("Controller not found!\n");
 		return NULL;
-	} else
+	} else {
 		puts ("Lime\n");
+
+		/* Set Change of Clock Frequency Register */
+		HOST_WR_REG (GC_CCF, CONFIG_SYS_MB862xx_CCF);
+		/* Delay required */
+		udelay(300);
+		/* Set Memory I/F Mode Register) */
+		HOST_WR_REG (GC_MMR, CONFIG_SYS_MB862xx_MMR);
+	}
 #endif
 
 	de_init ();
@@ -389,6 +433,7 @@ void video_set_lut (unsigned int index, unsigned char r,
 	L0PAL_WR_REG (index, (r << 16) | (g << 8) | (b));
 }
 
+#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
 /*
  * Drawing engine Fill and BitBlt screen region
  */
@@ -430,3 +475,4 @@ void video_hw_bitblt (unsigned int bpp, unsigned int src_x,
 	DE_WR_FIFO ((height << 16) | width);
 	de_wait (); /* sync */
 }
+#endif