net: add Faraday FTMAC110 10/100Mbps ethernet support

Faraday FTMAC110 10/100Mbps supports half-word data transfer for Linux.
However it has a weird DMA alignment issue:

(1) Tx DMA Buffer Address:
    1 bytes aligned: Invalid
    2 bytes aligned: O.K
    4 bytes aligned: O.K

(2) Rx DMA Buffer Address:
    1 bytes aligned: Invalid
    2 bytes aligned: O.K
    4 bytes aligned: Invalid!!!

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Tom Rini <trini@ti.com>

3 files changed, 651 insertions, 0 deletions

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 1197f9a..9cf2983 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -46,6 +46,7 @@ COBJS-$(CONFIG_ETHOC) += ethoc.o
 COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
 COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
 COBJS-$(CONFIG_FTGMAC100) += ftgmac100.o
+COBJS-$(CONFIG_FTMAC110) += ftmac110.o
 COBJS-$(CONFIG_FTMAC100) += ftmac100.o
 COBJS-$(CONFIG_GRETH) += greth.o
 COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
diff --git a/drivers/net/ftmac110.c b/drivers/net/ftmac110.c
new file mode 100644
index 0000000..579dcc7
--- /dev/null
+++ b/drivers/net/ftmac110.c
@@ -0,0 +1,473 @@
+/*
+ * Faraday 10/100Mbps Ethernet Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/dma-mapping.h>
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+#endif
+
+#include "ftmac110.h"
+
+#define CFG_RXDES_NUM   8
+#define CFG_TXDES_NUM   2
+#define CFG_XBUF_SIZE   1536
+
+#define CFG_MDIORD_TIMEOUT  (CONFIG_SYS_HZ >> 1) /* 500 ms */
+#define CFG_MDIOWR_TIMEOUT  (CONFIG_SYS_HZ >> 1) /* 500 ms */
+#define CFG_LINKUP_TIMEOUT  (CONFIG_SYS_HZ << 2) /* 4 sec */
+
+/*
+ * FTMAC110 DMA design issue
+ *
+ * Its DMA engine has a weird restriction that its Rx DMA engine
+ * accepts only 16-bits aligned address, 32-bits aligned is not
+ * acceptable. However this restriction does not apply to Tx DMA.
+ *
+ * Conclusion:
+ * (1) Tx DMA Buffer Address:
+ *     1 bytes aligned: Invalid
+ *     2 bytes aligned: O.K
+ *     4 bytes aligned: O.K (-> u-boot ZeroCopy is possible)
+ * (2) Rx DMA Buffer Address:
+ *     1 bytes aligned: Invalid
+ *     2 bytes aligned: O.K
+ *     4 bytes aligned: Invalid
+ */
+
+struct ftmac110_chip {
+	void __iomem *regs;
+	uint32_t imr;
+	uint32_t maccr;
+	uint32_t lnkup;
+	uint32_t phy_addr;
+
+	struct ftmac110_rxd *rxd;
+	ulong                rxd_dma;
+	uint32_t             rxd_idx;
+
+	struct ftmac110_txd *txd;
+	ulong                txd_dma;
+	uint32_t             txd_idx;
+};
+
+static int ftmac110_reset(struct eth_device *dev);
+
+static uint16_t mdio_read(struct eth_device *dev,
+	uint8_t phyaddr, uint8_t phyreg)
+{
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_regs __iomem *regs = chip->regs;
+	uint32_t tmp, ts;
+	uint16_t ret = 0xffff;
+
+	tmp = PHYCR_READ
+		| (phyaddr << PHYCR_ADDR_SHIFT)
+		| (phyreg  << PHYCR_REG_SHIFT);
+
+	writel(tmp, &regs->phycr);
+
+	for (ts = get_timer(0); get_timer(ts) < CFG_MDIORD_TIMEOUT; ) {
+		tmp = readl(&regs->phycr);
+		if (tmp & PHYCR_READ)
+			continue;
+		break;
+	}
+
+	if (tmp & PHYCR_READ)
+		printf("ftmac110: mdio read timeout\n");
+	else
+		ret = (uint16_t)(tmp & 0xffff);
+
+	return ret;
+}
+
+static void mdio_write(struct eth_device *dev,
+	uint8_t phyaddr, uint8_t phyreg, uint16_t phydata)
+{
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_regs __iomem *regs = chip->regs;
+	uint32_t tmp, ts;
+
+	tmp = PHYCR_WRITE
+		| (phyaddr << PHYCR_ADDR_SHIFT)
+		| (phyreg  << PHYCR_REG_SHIFT);
+
+	writel(phydata, &regs->phydr);
+	writel(tmp, &regs->phycr);
+
+	for (ts = get_timer(0); get_timer(ts) < CFG_MDIOWR_TIMEOUT; ) {
+		if (readl(&regs->phycr) & PHYCR_WRITE)
+			continue;
+		break;
+	}
+
+	if (readl(&regs->phycr) & PHYCR_WRITE)
+		printf("ftmac110: mdio write timeout\n");
+}
+
+static uint32_t ftmac110_phyqry(struct eth_device *dev)
+{
+	ulong ts;
+	uint32_t maccr;
+	uint16_t pa, tmp, bmsr, bmcr;
+	struct ftmac110_chip *chip = dev->priv;
+
+	/* Default = 100Mbps Full */
+	maccr = MACCR_100M | MACCR_FD;
+
+	/* 1. find the phy device  */
+	for (pa = 0; pa < 32; ++pa) {
+		tmp = mdio_read(dev, pa, MII_PHYSID1);
+		if (tmp == 0xFFFF || tmp == 0x0000)
+			continue;
+		chip->phy_addr = pa;
+		break;
+	}
+	if (pa >= 32) {
+		puts("ftmac110: phy device not found!\n");
+		goto exit;
+	}
+
+	/* 2. wait until link-up & auto-negotiation complete */
+	chip->lnkup = 0;
+	bmcr = mdio_read(dev, chip->phy_addr, MII_BMCR);
+	ts = get_timer(0);
+	do {
+		bmsr = mdio_read(dev, chip->phy_addr, MII_BMSR);
+		chip->lnkup = (bmsr & BMSR_LSTATUS) ? 1 : 0;
+		if (!chip->lnkup)
+			continue;
+		if (!(bmcr & BMCR_ANENABLE) || (bmsr & BMSR_ANEGCOMPLETE))
+			break;
+	} while (get_timer(ts) < CFG_LINKUP_TIMEOUT);
+	if (!chip->lnkup) {
+		puts("ftmac110: link down\n");
+		goto exit;
+	}
+	if (!(bmcr & BMCR_ANENABLE))
+		puts("ftmac110: auto negotiation disabled\n");
+	else if (!(bmsr & BMSR_ANEGCOMPLETE))
+		puts("ftmac110: auto negotiation timeout\n");
+
+	/* 3. derive MACCR */
+	if ((bmcr & BMCR_ANENABLE) && (bmsr & BMSR_ANEGCOMPLETE)) {
+		tmp  = mdio_read(dev, chip->phy_addr, MII_ADVERTISE);
+		tmp &= mdio_read(dev, chip->phy_addr, MII_LPA);
+		if (tmp & LPA_100FULL)      /* 100Mbps full-duplex */
+			maccr = MACCR_100M | MACCR_FD;
+		else if (tmp & LPA_100HALF) /* 100Mbps half-duplex */
+			maccr = MACCR_100M;
+		else if (tmp & LPA_10FULL)  /* 10Mbps full-duplex */
+			maccr = MACCR_FD;
+		else if (tmp & LPA_10HALF)  /* 10Mbps half-duplex */
+			maccr = 0;
+	} else {
+		if (bmcr & BMCR_SPEED100)
+			maccr = MACCR_100M;
+		else
+			maccr = 0;
+		if (bmcr & BMCR_FULLDPLX)
+			maccr |= MACCR_FD;
+	}
+
+exit:
+	printf("ftmac110: %d Mbps, %s\n",
+	       (maccr & MACCR_100M) ? 100 : 10,
+	       (maccr & MACCR_FD) ? "Full" : "half");
+	return maccr;
+}
+
+static int ftmac110_reset(struct eth_device *dev)
+{
+	uint8_t *a;
+	uint32_t i, maccr;
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_regs __iomem *regs = chip->regs;
+
+	/* 1. MAC reset */
+	writel(MACCR_RESET, &regs->maccr);
+	for (i = get_timer(0); get_timer(i) < 1000; ) {
+		if (readl(&regs->maccr) & MACCR_RESET)
+			continue;
+		break;
+	}
+	if (readl(&regs->maccr) & MACCR_RESET) {
+		printf("ftmac110: reset failed\n");
+		return -ENXIO;
+	}
+
+	/* 1-1. Init tx ring */
+	for (i = 0; i < CFG_TXDES_NUM; ++i) {
+		/* owned by SW */
+		chip->txd[i].ct[0] = 0;
+	}
+	chip->txd_idx = 0;
+
+	/* 1-2. Init rx ring */
+	for (i = 0; i < CFG_RXDES_NUM; ++i) {
+		/* owned by HW */
+		chip->rxd[i].ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER);
+	}
+	chip->rxd_idx = 0;
+
+	/* 2. PHY status query */
+	maccr = ftmac110_phyqry(dev);
+
+	/* 3. Fix up the MACCR value */
+	chip->maccr = maccr | MACCR_CRCAPD | MACCR_RXALL | MACCR_RXRUNT
+		| MACCR_RXEN | MACCR_TXEN | MACCR_RXDMAEN | MACCR_TXDMAEN;
+
+	/* 4. MAC address setup */
+	a = dev->enetaddr;
+	writel(a[1] | (a[0] << 8), &regs->mac[0]);
+	writel(a[5] | (a[4] << 8) | (a[3] << 16)
+		| (a[2] << 24), &regs->mac[1]);
+
+	/* 5. MAC registers setup */
+	writel(chip->rxd_dma, &regs->rxba);
+	writel(chip->txd_dma, &regs->txba);
+	/* interrupt at each tx/rx */
+	writel(ITC_DEFAULT, &regs->itc);
+	/* no tx pool, rx poll = 1 normal cycle */
+	writel(APTC_DEFAULT, &regs->aptc);
+	/* rx threshold = [6/8 fifo, 2/8 fifo] */
+	writel(DBLAC_DEFAULT, &regs->dblac);
+	/* disable & clear all interrupt status */
+	chip->imr = 0;
+	writel(ISR_ALL, &regs->isr);
+	writel(chip->imr, &regs->imr);
+	/* enable mac */
+	writel(chip->maccr, &regs->maccr);
+
+	return 0;
+}
+
+static int ftmac110_probe(struct eth_device *dev, bd_t *bis)
+{
+	debug("ftmac110: probe\n");
+
+	if (ftmac110_reset(dev))
+		return -1;
+
+	return 0;
+}
+
+static void ftmac110_halt(struct eth_device *dev)
+{
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_regs __iomem *regs = chip->regs;
+
+	writel(0, &regs->imr);
+	writel(0, &regs->maccr);
+
+	debug("ftmac110: halt\n");
+}
+
+static int ftmac110_send(struct eth_device *dev, void *pkt, int len)
+{
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_regs __iomem *regs = chip->regs;
+	struct ftmac110_txd *des;
+
+	if (!chip->lnkup)
+		return 0;
+
+	if (len <= 0 || len > CFG_XBUF_SIZE) {
+		printf("ftmac110: bad tx pkt len(%d)\n", len);
+		return 0;
+	}
+
+	len = max(60, len);
+
+	des = &chip->txd[chip->txd_idx];
+	if (le32_to_cpu(des->ct[0]) & FTMAC110_TXCT0_OWNER) {
+		/* kick-off Tx DMA */
+		writel(0xffffffff, &regs->txpd);
+		printf("ftmac110: out of txd\n");
+		return 0;
+	}
+
+	memcpy(des->vbuf, (void *)pkt, len);
+	dma_map_single(des->vbuf, len, DMA_TO_DEVICE);
+
+	/* update len, fts and lts */
+	des->ct[1] &= cpu_to_le32(FTMAC110_TXCT1_END);
+	des->ct[1] |= cpu_to_le32(FTMAC110_TXCT1_LEN(len)
+		| FTMAC110_TXCT1_FTS | FTMAC110_TXCT1_LTS);
+
+	/* set owner bit and clear others */
+	des->ct[0] = cpu_to_le32(FTMAC110_TXCT0_OWNER);
+
+	/* kick-off Tx DMA */
+	writel(0xffffffff, &regs->txpd);
+
+	chip->txd_idx = (chip->txd_idx + 1) % CFG_TXDES_NUM;
+
+	return len;
+}
+
+static int ftmac110_recv(struct eth_device *dev)
+{
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_rxd *des;
+	uint32_t ct0, len, rlen = 0;
+	uint8_t *buf;
+
+	if (!chip->lnkup)
+		return 0;
+
+	do {
+		des = &chip->rxd[chip->rxd_idx];
+		ct0 = le32_to_cpu(des->ct[0]);
+		if (ct0 & FTMAC110_RXCT0_OWNER)
+			break;
+
+		len = FTMAC110_RXCT0_LEN(ct0);
+		buf = des->vbuf;
+
+		if (ct0 & FTMAC110_RXCT0_ERRMASK) {
+			printf("ftmac110: rx error\n");
+		} else {
+			dma_map_single(buf, len, DMA_FROM_DEVICE);
+			NetReceive(buf, len);
+			rlen += len;
+		}
+
+		/* owned by hardware */
+		des->ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER);
+
+		chip->rxd_idx = (chip->rxd_idx + 1) % CFG_RXDES_NUM;
+	} while (0);
+
+	return rlen;
+}
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+
+static int ftmac110_mdio_read(
+	const char *devname, uint8_t addr, uint8_t reg, uint16_t *value)
+{
+	int ret = 0;
+	struct eth_device *dev;
+
+	dev = eth_get_dev_by_name(devname);
+	if (dev == NULL) {
+		printf("%s: no such device\n", devname);
+		ret = -1;
+	} else {
+		*value = mdio_read(dev, addr, reg);
+	}
+
+	return ret;
+}
+
+static int ftmac110_mdio_write(
+	const char *devname, uint8_t addr, uint8_t reg, uint16_t value)
+{
+	int ret = 0;
+	struct eth_device *dev;
+
+	dev = eth_get_dev_by_name(devname);
+	if (dev == NULL) {
+		printf("%s: no such device\n", devname);
+		ret = -1;
+	} else {
+		mdio_write(dev, addr, reg, value);
+	}
+
+	return ret;
+}
+
+#endif    /* #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) */
+
+int ftmac110_initialize(bd_t *bis)
+{
+	int i, card_nr = 0;
+	struct eth_device *dev;
+	struct ftmac110_chip *chip;
+
+	dev = malloc(sizeof(*dev) + sizeof(*chip));
+	if (dev == NULL) {
+		panic("ftmac110: out of memory 1\n");
+		return -1;
+	}
+	chip = (struct ftmac110_chip *)(dev + 1);
+	memset(dev, 0, sizeof(*dev) + sizeof(*chip));
+
+	sprintf(dev->name, "FTMAC110#%d", card_nr);
+
+	dev->iobase = CONFIG_FTMAC110_BASE;
+	chip->regs = (void __iomem *)dev->iobase;
+	dev->priv = chip;
+	dev->init = ftmac110_probe;
+	dev->halt = ftmac110_halt;
+	dev->send = ftmac110_send;
+	dev->recv = ftmac110_recv;
+
+	if (!eth_getenv_enetaddr_by_index("eth", card_nr, dev->enetaddr))
+		eth_random_enetaddr(dev->enetaddr);
+
+	/* allocate tx descriptors (it must be 16 bytes aligned) */
+	chip->txd = dma_alloc_coherent(
+		sizeof(struct ftmac110_txd) * CFG_TXDES_NUM, &chip->txd_dma);
+	if (!chip->txd)
+		panic("ftmac110: out of memory 3\n");
+	memset(chip->txd, 0,
+	       sizeof(struct ftmac110_txd) * CFG_TXDES_NUM);
+	for (i = 0; i < CFG_TXDES_NUM; ++i) {
+		void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE);
+		if (!va)
+			panic("ftmac110: out of memory 4\n");
+		chip->txd[i].vbuf  = va;
+		chip->txd[i].buf   = cpu_to_le32(virt_to_phys(va));
+		chip->txd[i].ct[1] = 0;
+		chip->txd[i].ct[0] = 0; /* owned by SW */
+	}
+	chip->txd[i - 1].ct[1] |= cpu_to_le32(FTMAC110_TXCT1_END);
+	chip->txd_idx = 0;
+
+	/* allocate rx descriptors (it must be 16 bytes aligned) */
+	chip->rxd = dma_alloc_coherent(
+		sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM, &chip->rxd_dma);
+	if (!chip->rxd)
+		panic("ftmac110: out of memory 4\n");
+	memset((void *)chip->rxd, 0,
+	       sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM);
+	for (i = 0; i < CFG_RXDES_NUM; ++i) {
+		void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE + 2);
+		if (!va)
+			panic("ftmac110: out of memory 5\n");
+		/* it needs to be exactly 2 bytes aligned */
+		va = ((uint8_t *)va + 2);
+		chip->rxd[i].vbuf  = va;
+		chip->rxd[i].buf   = cpu_to_le32(virt_to_phys(va));
+		chip->rxd[i].ct[1] = cpu_to_le32(CFG_XBUF_SIZE);
+		chip->rxd[i].ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER);
+	}
+	chip->rxd[i - 1].ct[1] |= cpu_to_le32(FTMAC110_RXCT1_END);
+	chip->rxd_idx = 0;
+
+	eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+	miiphy_register(dev->name, ftmac110_mdio_read, ftmac110_mdio_write);
+#endif
+
+	card_nr++;
+
+	return card_nr;
+}
diff --git a/drivers/net/ftmac110.h b/drivers/net/ftmac110.h
new file mode 100644
index 0000000..5b2d23b
--- /dev/null
+++ b/drivers/net/ftmac110.h
@@ -0,0 +1,177 @@
+/*
+ * Faraday 10/100Mbps Ethernet Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _FTMAC110_H
+#define _FTMAC110_H
+
+struct ftmac110_regs {
+	uint32_t isr;    /* 0x00: Interrups Status Register */
+	uint32_t imr;    /* 0x04: Interrupt Mask Register */
+	uint32_t mac[2]; /* 0x08: MAC Address */
+	uint32_t mht[2]; /* 0x10: Multicast Hash Table Register */
+	uint32_t txpd;   /* 0x18: Tx Poll Demand Register */
+	uint32_t rxpd;   /* 0x1c: Rx Poll Demand Register */
+	uint32_t txba;   /* 0x20: Tx Ring Base Address Register */
+	uint32_t rxba;   /* 0x24: Rx Ring Base Address Register */
+	uint32_t itc;    /* 0x28: Interrupt Timer Control Register */
+	uint32_t aptc;   /* 0x2C: Automatic Polling Timer Control Register */
+	uint32_t dblac;  /* 0x30: DMA Burst Length&Arbitration Control */
+	uint32_t revr;   /* 0x34: Revision Register */
+	uint32_t fear;   /* 0x38: Feature Register */
+	uint32_t rsvd[19];
+	uint32_t maccr;  /* 0x88: MAC Control Register */
+	uint32_t macsr;  /* 0x8C: MAC Status Register */
+	uint32_t phycr;  /* 0x90: PHY Control Register */
+	uint32_t phydr;  /* 0x94: PHY Data Register */
+	uint32_t fcr;    /* 0x98: Flow Control Register */
+	uint32_t bpr;    /* 0x9C: Back Pressure Register */
+};
+
+/*
+ * Interrupt status/mask register(ISR/IMR) bits
+ */
+#define ISR_ALL          0x3ff
+#define ISR_PHYSTCHG     (1 << 9) /* phy status change */
+#define ISR_AHBERR       (1 << 8) /* bus error */
+#define ISR_RXLOST       (1 << 7) /* rx lost */
+#define ISR_RXFIFO       (1 << 6) /* rx to fifo */
+#define ISR_TXLOST       (1 << 5) /* tx lost */
+#define ISR_TXOK         (1 << 4) /* tx to ethernet */
+#define ISR_NOTXBUF      (1 << 3) /* out of tx buffer */
+#define ISR_TXFIFO       (1 << 2) /* tx to fifo */
+#define ISR_NORXBUF      (1 << 1) /* out of rx buffer */
+#define ISR_RXOK         (1 << 0) /* rx to buffer */
+
+/*
+ * MACCR control bits
+ */
+#define MACCR_100M       (1 << 18) /* 100Mbps mode */
+#define MACCR_RXBCST     (1 << 17) /* rx broadcast packet */
+#define MACCR_RXMCST     (1 << 16) /* rx multicast packet */
+#define MACCR_FD         (1 << 15) /* full duplex */
+#define MACCR_CRCAPD     (1 << 14) /* tx crc append */
+#define MACCR_RXALL      (1 << 12) /* rx all packets */
+#define MACCR_RXFTL      (1 << 11) /* rx packet even it's > 1518 byte */
+#define MACCR_RXRUNT     (1 << 10) /* rx packet even it's < 64 byte */
+#define MACCR_RXMCSTHT   (1 << 9)  /* rx multicast hash table */
+#define MACCR_RXEN       (1 << 8)  /* rx enable */
+#define MACCR_RXINHDTX   (1 << 6)  /* rx in half duplex tx */
+#define MACCR_TXEN       (1 << 5)  /* tx enable */
+#define MACCR_CRCDIS     (1 << 4)  /* tx packet even it's crc error */
+#define MACCR_LOOPBACK   (1 << 3)  /* loop-back */
+#define MACCR_RESET      (1 << 2)  /* reset */
+#define MACCR_RXDMAEN    (1 << 1)  /* rx dma enable */
+#define MACCR_TXDMAEN    (1 << 0)  /* tx dma enable */
+
+/*
+ * PHYCR control bits
+ */
+#define PHYCR_READ       (1 << 26)
+#define PHYCR_WRITE      (1 << 27)
+#define PHYCR_REG_SHIFT  21
+#define PHYCR_ADDR_SHIFT 16
+
+/*
+ * ITC control bits
+ */
+
+/* Tx Cycle Length */
+#define ITC_TX_CYCLONG   (1 << 15) /* 100Mbps=81.92us; 10Mbps=819.2us */
+#define ITC_TX_CYCNORM   (0 << 15) /* 100Mbps=5.12us;  10Mbps=51.2us */
+/* Tx Threshold: Aggregate n interrupts as 1 interrupt */
+#define ITC_TX_THR(n)    (((n) & 0x7) << 12)
+/* Tx Interrupt Timeout = n * Tx Cycle */
+#define ITC_TX_ITMO(n)   (((n) & 0xf) << 8)
+/* Rx Cycle Length */
+#define ITC_RX_CYCLONG   (1 << 7)  /* 100Mbps=81.92us; 10Mbps=819.2us */
+#define ITC_RX_CYCNORM   (0 << 7)  /* 100Mbps=5.12us;  10Mbps=51.2us */
+/* Rx Threshold: Aggregate n interrupts as 1 interrupt */
+#define ITC_RX_THR(n)    (((n) & 0x7) << 4)
+/* Rx Interrupt Timeout = n * Rx Cycle */
+#define ITC_RX_ITMO(n)   (((n) & 0xf) << 0)
+
+#define ITC_DEFAULT \
+	(ITC_TX_THR(1) | ITC_TX_ITMO(0) | ITC_RX_THR(1) | ITC_RX_ITMO(0))
+
+/*
+ * APTC contrl bits
+ */
+
+/* Tx Cycle Length */
+#define APTC_TX_CYCLONG  (1 << 12) /* 100Mbps=81.92us; 10Mbps=819.2us */
+#define APTC_TX_CYCNORM  (0 << 12) /* 100Mbps=5.12us;  10Mbps=51.2us */
+/* Tx Poll Timeout = n * Tx Cycle, 0=No auto polling */
+#define APTC_TX_PTMO(n)  (((n) & 0xf) << 8)
+/* Rx Cycle Length */
+#define APTC_RX_CYCLONG  (1 << 4)  /* 100Mbps=81.92us; 10Mbps=819.2us */
+#define APTC_RX_CYCNORM  (0 << 4)  /* 100Mbps=5.12us;  10Mbps=51.2us */
+/* Rx Poll Timeout = n * Rx Cycle, 0=No auto polling */
+#define APTC_RX_PTMO(n)  (((n) & 0xf) << 0)
+
+#define APTC_DEFAULT     (APTC_TX_PTMO(0) | APTC_RX_PTMO(1))
+
+/*
+ * DBLAC contrl bits
+ */
+#define DBLAC_BURST_MAX_ANY  (0 << 14) /* un-limited */
+#define DBLAC_BURST_MAX_32X4 (2 << 14) /* max = 32 x 4 bytes */
+#define DBLAC_BURST_MAX_64X4 (3 << 14) /* max = 64 x 4 bytes */
+#define DBLAC_RXTHR_EN       (1 << 9)  /* enable rx threshold arbitration */
+#define DBLAC_RXTHR_HIGH(n)  (((n) & 0x7) << 6) /* upper bound = n/8 fifo */
+#define DBLAC_RXTHR_LOW(n)   (((n) & 0x7) << 3) /* lower bound = n/8 fifo */
+#define DBLAC_BURST_CAP16    (1 << 2)  /* support burst 16 */
+#define DBLAC_BURST_CAP8     (1 << 1)  /* support burst 8 */
+#define DBLAC_BURST_CAP4     (1 << 0)  /* support burst 4 */
+
+#define DBLAC_DEFAULT \
+	(DBLAC_RXTHR_EN | DBLAC_RXTHR_HIGH(6) | DBLAC_RXTHR_LOW(2))
+
+/*
+ * descriptor structure
+ */
+struct ftmac110_rxd {
+	uint32_t ct[2];
+	uint32_t buf;
+	void    *vbuf; /* reserved */
+};
+
+#define FTMAC110_RXCT0_OWNER       BIT_MASK(31) /* owner: 1=HW, 0=SW */
+#define FTMAC110_RXCT0_FRS         BIT_MASK(29) /* first pkt desc */
+#define FTMAC110_RXCT0_LRS         BIT_MASK(28) /* last pkt desc */
+#define FTMAC110_RXCT0_ODDNB       BIT_MASK(22) /* odd nibble */
+#define FTMAC110_RXCT0_RUNT        BIT_MASK(21) /* runt pkt */
+#define FTMAC110_RXCT0_FTL         BIT_MASK(20) /* frame too long */
+#define FTMAC110_RXCT0_CRC         BIT_MASK(19) /* pkt crc error */
+#define FTMAC110_RXCT0_ERR         BIT_MASK(18) /* bus error */
+#define FTMAC110_RXCT0_ERRMASK     (0x1f << 18) /* all errors */
+#define FTMAC110_RXCT0_BCST        BIT_MASK(17) /* Bcst pkt */
+#define FTMAC110_RXCT0_MCST        BIT_MASK(16) /* Mcst pkt */
+#define FTMAC110_RXCT0_LEN(x)      ((x) & 0x7ff)
+
+#define FTMAC110_RXCT1_END         BIT_MASK(31)
+#define FTMAC110_RXCT1_BUFSZ(x)    ((x) & 0x7ff)
+
+struct ftmac110_txd {
+	uint32_t ct[2];
+	uint32_t buf;
+	void    *vbuf; /* reserved */
+};
+
+#define FTMAC110_TXCT0_OWNER       BIT_MASK(31) /* owner: 1=HW, 0=SW */
+#define FTMAC110_TXCT0_COL         0x00000003   /* collision */
+
+#define FTMAC110_TXCT1_END         BIT_MASK(31) /* end of ring */
+#define FTMAC110_TXCT1_TXIC        BIT_MASK(30) /* tx done interrupt */
+#define FTMAC110_TXCT1_TX2FIC      BIT_MASK(29) /* tx fifo interrupt */
+#define FTMAC110_TXCT1_FTS         BIT_MASK(28) /* first pkt desc */
+#define FTMAC110_TXCT1_LTS         BIT_MASK(27) /* last pkt desc */
+#define FTMAC110_TXCT1_LEN(x)      ((x) & 0x7ff)
+
+#endif  /* FTMAC110_H */