diff options
| author | Michal Simek <monstr@monstr.eu> | 2012-10-15 14:01:23 +0200 |
|---|---|---|
| committer | Michal Simek <michal.simek@xilinx.com> | 2013-04-30 11:39:19 +0200 |
| commit | 80243528efa5e17db60328005344bb8a5e8e8076 (patch) | |
| tree | 8dbcc857b681a640ebd90eb7ec8f11daa003668c /drivers | |
| parent | 058687597d3ff26c415db33614b881de258a365b (diff) | |
| download | u-boot-imx-80243528efa5e17db60328005344bb8a5e8e8076.zip u-boot-imx-80243528efa5e17db60328005344bb8a5e8e8076.tar.gz u-boot-imx-80243528efa5e17db60328005344bb8a5e8e8076.tar.bz2 | |
net: gem: Fix gem driver on 1Gbps LAN
The whole driver used 100Mbps because of zc702 rev B.
Fix problem with not setup proper clock for gem1.
This is generic approach for clk setup.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/zynq_gem.c | 53 |
1 files changed, 38 insertions, 15 deletions
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 7758cf8..2d717e9 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -33,6 +33,7 @@ #include <phy.h> #include <miiphy.h> #include <watchdog.h> +#include <asm/arch/sys_proto.h> #if !defined(CONFIG_PHYLIB) # error XILINX_GEM_ETHERNET requires PHYLIB @@ -67,13 +68,14 @@ #define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */ #define ZYNQ_GEM_NWCTRL_STARTTX_MASK 0x00000200 /* Start tx (tx_go) */ -#define ZYNQ_GEM_NWCFG_SPEED 0x00000001 /* 100 Mbps operation */ -#define ZYNQ_GEM_NWCFG_FDEN 0x00000002 /* Full Duplex mode */ -#define ZYNQ_GEM_NWCFG_FSREM 0x00020000 /* FCS removal */ +#define ZYNQ_GEM_NWCFG_SPEED100 0x000000001 /* 100 Mbps operation */ +#define ZYNQ_GEM_NWCFG_SPEED1000 0x000000400 /* 1Gbps operation */ +#define ZYNQ_GEM_NWCFG_FDEN 0x000000002 /* Full Duplex mode */ +#define ZYNQ_GEM_NWCFG_FSREM 0x000020000 /* FCS removal */ #define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000080000 /* Div pclk by 32, 80MHz */ +#define ZYNQ_GEM_NWCFG_MDCCLKDIV2 0x0000c0000 /* Div pclk by 48, 120MHz */ -#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_NWCFG_SPEED | \ - ZYNQ_GEM_NWCFG_FDEN | \ +#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_NWCFG_FDEN | \ ZYNQ_GEM_NWCFG_FSREM | \ ZYNQ_GEM_NWCFG_MDCCLKDIV) @@ -227,7 +229,7 @@ static int zynq_gem_setup_mac(struct eth_device *dev) static int zynq_gem_init(struct eth_device *dev, bd_t * bis) { - u32 i; + u32 i, rclk, clk = 0; struct phy_device *phydev; const u32 stat_size = (sizeof(struct zynq_gem_regs) - offsetof(struct zynq_gem_regs, stat)) / 4; @@ -277,16 +279,11 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) /* Write RxBDs to IP */ writel((u32)&(priv->rx_bd), ®s->rxqbase); - /* MAC Setup */ - /* Setup Network Configuration register */ - writel(ZYNQ_GEM_NWCFG_INIT, ®s->nwcfg); - /* Setup for DMA Configuration register */ writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr); /* Setup for Network Control register, MDIO, Rx and Tx enable */ - setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK | - ZYNQ_GEM_NWCTRL_RXEN_MASK | ZYNQ_GEM_NWCTRL_TXEN_MASK); + setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK); priv->init++; } @@ -294,12 +291,38 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) /* interface - look at tsec */ phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0); - phydev->supported &= supported; + phydev->supported = supported | ADVERTISED_Pause | + ADVERTISED_Asym_Pause; phydev->advertising = phydev->supported; priv->phydev = phydev; phy_config(phydev); phy_startup(phydev); + switch (phydev->speed) { + case SPEED_1000: + writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000, + ®s->nwcfg); + rclk = (0 << 4) | (1 << 0); + clk = (1 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + break; + case SPEED_100: + clrsetbits_le32(®s->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000, + ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100); + rclk = 1 << 0; + clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + break; + case SPEED_10: + rclk = 1 << 0; + /* FIXME untested */ + clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + break; + } + /* FIXME maybe better to define gem address in hardware.h */ + zynq_slcr_gem_clk_setup(dev->iobase != 0xE000B000, rclk, clk); + + setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK | + ZYNQ_GEM_NWCTRL_TXEN_MASK); + return 0; } @@ -380,8 +403,8 @@ static void zynq_gem_halt(struct eth_device *dev) { struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase; - /* Disable the receiver & transmitter */ - writel(0, ®s->nwctrl); + clrsetbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK | + ZYNQ_GEM_NWCTRL_TXEN_MASK, 0); } static int zynq_gem_miiphyread(const char *devname, uchar addr, |