Merge branch 'u-boot/master' into 'u-boot-arm/master'

Conflicts:
	drivers/spi/tegra20_sflash.c
	include/fdtdec.h
	lib/fdtdec.c

22 files changed, 2332 insertions, 163 deletions

diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 65791aa..1d6faa2 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -43,6 +43,7 @@ COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o
 COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
 COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
 COBJS-$(CONFIG_SDHCI) += sdhci.o
+COBJS-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o
 COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
 COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o
 COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c
new file mode 100644
index 0000000..b0afc3c
--- /dev/null
+++ b/drivers/mmc/bcm2835_sdhci.c
@@ -0,0 +1,189 @@
+/*
+ * This code was extracted from:
+ * git://github.com/gonzoua/u-boot-pi.git master
+ * and hence presumably (C) 2012 Oleksandr Tymoshenko
+ *
+ * Tweaks for U-Boot upstreaming
+ * (C) 2012 Stephen Warren
+ *
+ * Portions (e.g. read/write macros, concepts for back-to-back register write
+ * timing workarounds) obviously extracted from the Linux kernel at:
+ * https://github.com/raspberrypi/linux.git rpi-3.6.y
+ *
+ * The Linux kernel code has the following (c) and license, which is hence
+ * propagated to Oleksandr's tree and here:
+ *
+ * Support for SDHCI device on 2835
+ * Based on sdhci-bcm2708.c (c) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * SDHCI platform device - Arasan SD controller in BCM2708
+ *
+ * Inspired by sdhci-pci.c, by Pierre Ossman
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+/* 400KHz is max freq for card ID etc. Use that as min */
+#define MIN_FREQ 400000
+
+struct bcm2835_sdhci_host {
+	struct sdhci_host host;
+	uint twoticks_delay;
+	ulong last_write;
+};
+
+static inline struct bcm2835_sdhci_host *to_bcm(struct sdhci_host *host)
+{
+	return (struct bcm2835_sdhci_host *)host;
+}
+
+static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val,
+						int reg)
+{
+	struct bcm2835_sdhci_host *bcm_host = to_bcm(host);
+
+	/*
+	 * The Arasan has a bugette whereby it may lose the content of
+	 * successive writes to registers that are within two SD-card clock
+	 * cycles of each other (a clock domain crossing problem).
+	 * It seems, however, that the data register does not have this problem.
+	 * (Which is just as well - otherwise we'd have to nobble the DMA engine
+	 * too)
+	 */
+	while (get_timer(bcm_host->last_write) < bcm_host->twoticks_delay)
+		;
+
+	writel(val, host->ioaddr + reg);
+	bcm_host->last_write = get_timer(0);
+}
+
+static inline u32 bcm2835_sdhci_raw_readl(struct sdhci_host *host, int reg)
+{
+	return readl(host->ioaddr + reg);
+}
+
+static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	bcm2835_sdhci_raw_writel(host, val, reg);
+}
+
+static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	static u32 shadow;
+	u32 oldval = (reg == SDHCI_COMMAND) ? shadow :
+		bcm2835_sdhci_raw_readl(host, reg & ~3);
+	u32 word_num = (reg >> 1) & 1;
+	u32 word_shift = word_num * 16;
+	u32 mask = 0xffff << word_shift;
+	u32 newval = (oldval & ~mask) | (val << word_shift);
+
+	if (reg == SDHCI_TRANSFER_MODE)
+		shadow = newval;
+	else
+		bcm2835_sdhci_raw_writel(host, newval, reg & ~3);
+}
+
+static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	u32 oldval = bcm2835_sdhci_raw_readl(host, reg & ~3);
+	u32 byte_num = reg & 3;
+	u32 byte_shift = byte_num * 8;
+	u32 mask = 0xff << byte_shift;
+	u32 newval = (oldval & ~mask) | (val << byte_shift);
+
+	bcm2835_sdhci_raw_writel(host, newval, reg & ~3);
+}
+
+static u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
+{
+	u32 val = bcm2835_sdhci_raw_readl(host, reg);
+
+	return val;
+}
+
+static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg)
+{
+	u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3));
+	u32 word_num = (reg >> 1) & 1;
+	u32 word_shift = word_num * 16;
+	u32 word = (val >> word_shift) & 0xffff;
+
+	return word;
+}
+
+static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg)
+{
+	u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3));
+	u32 byte_num = reg & 3;
+	u32 byte_shift = byte_num * 8;
+	u32 byte = (val >> byte_shift) & 0xff;
+
+	return byte;
+}
+
+static const struct sdhci_ops bcm2835_ops = {
+	.write_l = bcm2835_sdhci_writel,
+	.write_w = bcm2835_sdhci_writew,
+	.write_b = bcm2835_sdhci_writeb,
+	.read_l = bcm2835_sdhci_readl,
+	.read_w = bcm2835_sdhci_readw,
+	.read_b = bcm2835_sdhci_readb,
+};
+
+int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq)
+{
+	struct bcm2835_sdhci_host *bcm_host;
+	struct sdhci_host *host;
+
+	bcm_host = malloc(sizeof(*bcm_host));
+	if (!bcm_host) {
+		printf("sdhci_host malloc fail!\n");
+		return 1;
+	}
+
+	/*
+	 * See the comments in bcm2835_sdhci_raw_writel().
+	 *
+	 * This should probably be dynamically calculated based on the actual
+	 * frequency. However, this is the longest we'll have to wait, and
+	 * doesn't seem to slow access down too much, so the added complexity
+	 * doesn't seem worth it for now.
+	 *
+	 * 1/MIN_FREQ is (max) time per tick of eMMC clock.
+	 * 2/MIN_FREQ is time for two ticks.
+	 * Multiply by 1000000 to get uS per two ticks.
+	 * +1 for hack rounding.
+	 */
+	bcm_host->twoticks_delay = ((2 * 1000000) / MIN_FREQ) + 1;
+	bcm_host->last_write = 0;
+
+	host = &bcm_host->host;
+	host->name = "bcm2835_sdhci";
+	host->ioaddr = (void *)regbase;
+	host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B |
+		SDHCI_QUIRK_WAIT_SEND_CMD;
+	host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+	host->ops = &bcm2835_ops;
+
+	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+	add_sdhci(host, emmc_freq, MIN_FREQ);
+
+	return 0;
+}
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 7b5fdd9..d732581 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -51,8 +51,12 @@ int mmc_getwp(struct mmc *mmc)
 
 	wp = board_mmc_getwp(mmc);
 
-	if ((wp < 0) && mmc->getwp)
-		wp = mmc->getwp(mmc);
+	if (wp < 0) {
+		if (mmc->getwp)
+			wp = mmc->getwp(mmc);
+		else
+			wp = 0;
+	}
 
 	return wp;
 }
@@ -692,8 +696,12 @@ int mmc_getcd(struct mmc *mmc)
 
 	cd = board_mmc_getcd(mmc);
 
-	if ((cd < 0) && mmc->getcd)
-		cd = mmc->getcd(mmc);
+	if (cd < 0) {
+		if (mmc->getcd)
+			cd = mmc->getcd(mmc);
+		else
+			cd = 1;
+	}
 
 	return cd;
 }
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 67cfcc2..166744c 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -593,8 +593,6 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
 	mmc->send_cmd = mmc_send_cmd;
 	mmc->set_ios = mmc_set_ios;
 	mmc->init = mmc_init_setup;
-	mmc->getcd = omap_mmc_getcd;
-	mmc->getwp = omap_mmc_getwp;
 	mmc->priv = priv_data;
 
 	switch (dev_index) {
@@ -616,7 +614,13 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
 		return 1;
 	}
 	priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd");
+	if (priv_data->cd_gpio != -1)
+		mmc->getcd = omap_mmc_getcd;
+
 	priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp");
+	if (priv_data->wp_gpio != -1)
+		mmc->getwp = omap_mmc_getwp;
+
 	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
 	mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
 				MMC_MODE_HC) & ~host_caps_mask;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index daca0ea..1eaea04 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -412,9 +412,11 @@ int sdhci_init(struct mmc *mmc)
 			status = sdhci_readl(host, SDHCI_PRESENT_STATE);
 	}
 
-	/* Eable all state */
-	sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_ENABLE);
-	sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_SIGNAL_ENABLE);
+	/* Enable only interrupts served by the SD controller */
+	sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK
+		     , SDHCI_INT_ENABLE);
+	/* Mask all sdhci interrupt sources */
+	sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index cee394e..bbf5443 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -25,6 +25,7 @@
 #include <asm/io.h>
 #include <asm/errno.h>
 #include <asm/arch/mem.h>
+#include <asm/arch/cpu.h>
 #include <asm/arch/omap_gpmc.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/compiler.h>
diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
index 05dc644..2716209 100644
--- a/drivers/mtd/spi/winbond.c
+++ b/drivers/mtd/spi/winbond.c
@@ -68,6 +68,11 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
 		.name			= "W25Q80",
 	},
 	{
+		.id			= 0x6016,
+		.nr_blocks		= 512,
+		.name			= "W25Q32DW",
+	},
+	{
 		.id			= 0x6017,
 		.nr_blocks		= 128,
 		.name			= "W25Q64DW",
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index 93f8417..7a36850 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -24,6 +24,7 @@
 #include <asm/errno.h>
 #include <asm/io.h>
 #include <phy.h>
+#include <asm/arch/cpu.h>
 
 #define BITMASK(bits)		(BIT(bits) - 1)
 #define PHY_REG_MASK		0x1f
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 8c71901..1dac16a 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -25,6 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libpower.o
 
+COBJS-$(CONFIG_EXYNOS_TMU)	+= exynos-tmu.o
 COBJS-$(CONFIG_FTPMU010_POWER)	+= ftpmu010.o
 COBJS-$(CONFIG_TPS6586X_POWER)	+= tps6586x.o
 COBJS-$(CONFIG_TWL4030_POWER)	+= twl4030.o
diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c
new file mode 100644
index 0000000..d4b3e65
--- /dev/null
+++ b/drivers/power/exynos-tmu.c
@@ -0,0 +1,319 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *      http://www.samsung.com
+ * Akshay Saraswat <akshay.s@samsung.com>
+ *
+ * EXYNOS - Thermal Management Unit
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <tmu.h>
+#include <asm/arch/tmu.h>
+#include <asm/arch/power.h>
+
+#define TRIMINFO_RELOAD		1
+#define CORE_EN			1
+#define THERM_TRIP_EN		(1 << 12)
+
+#define INTEN_RISE0		1
+#define INTEN_RISE1		(1 << 4)
+#define INTEN_RISE2		(1 << 8)
+#define INTEN_FALL0		(1 << 16)
+#define INTEN_FALL1		(1 << 20)
+#define INTEN_FALL2		(1 << 24)
+
+#define TRIM_INFO_MASK		0xff
+
+#define INTCLEAR_RISE0		1
+#define INTCLEAR_RISE1		(1 << 4)
+#define INTCLEAR_RISE2		(1 << 8)
+#define INTCLEAR_FALL0		(1 << 16)
+#define INTCLEAR_FALL1		(1 << 20)
+#define INTCLEAR_FALL2		(1 << 24)
+#define INTCLEARALL		(INTCLEAR_RISE0 | INTCLEAR_RISE1 | \
+				 INTCLEAR_RISE2 | INTCLEAR_FALL0 | \
+				 INTCLEAR_FALL1 | INTCLEAR_FALL2)
+
+/* Tmeperature threshold values for various thermal events */
+struct temperature_params {
+	/* minimum value in temperature code range */
+	unsigned int min_val;
+	/* maximum value in temperature code range */
+	unsigned int max_val;
+	/* temperature threshold to start warning */
+	unsigned int start_warning;
+	/* temperature threshold CPU tripping */
+	unsigned int start_tripping;
+	/* temperature threshold for HW tripping */
+	unsigned int hardware_tripping;
+};
+
+/* Pre-defined values and thresholds for calibration of current temperature */
+struct tmu_data {
+	/* pre-defined temperature thresholds */
+	struct temperature_params ts;
+	/* pre-defined efuse range minimum value */
+	unsigned int efuse_min_value;
+	/* pre-defined efuse value for temperature calibration */
+	unsigned int efuse_value;
+	/* pre-defined efuse range maximum value */
+	unsigned int efuse_max_value;
+	/* current temperature sensing slope */
+	unsigned int slope;
+};
+
+/* TMU device specific details and status */
+struct tmu_info {
+	/* base Address for the TMU */
+	unsigned tmu_base;
+	/* pre-defined values for calibration and thresholds */
+	struct tmu_data data;
+	/* value required for triminfo_25 calibration */
+	unsigned int te1;
+	/* value required for triminfo_85 calibration */
+	unsigned int te2;
+	/* Value for measured data calibration */
+	int dc_value;
+	/* enum value indicating status of the TMU */
+	int tmu_state;
+};
+
+/* Global struct tmu_info variable to store init values */
+static struct tmu_info gbl_info;
+
+/*
+ * Get current temperature code from register,
+ * then calculate and calibrate it's value
+ * in degree celsius.
+ *
+ * @return	current temperature of the chip as sensed by TMU
+ */
+static int get_cur_temp(struct tmu_info *info)
+{
+	int cur_temp;
+	struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+
+	/*
+	 * Temperature code range between min 25 and max 125.
+	 * May run more than once for first call as initial sensing
+	 * has not yet happened.
+	 */
+	do {
+		cur_temp = readl(&reg->current_temp) & 0xff;
+	} while (cur_temp == 0 && info->tmu_state == TMU_STATUS_NORMAL);
+
+	/* Calibrate current temperature */
+	cur_temp = cur_temp - info->te1 + info->dc_value;
+
+	return cur_temp;
+}
+
+/*
+ * Monitors status of the TMU device and exynos temperature
+ *
+ * @param temp	pointer to the current temperature value
+ * @return	enum tmu_status_t value, code indicating event to execute
+ */
+enum tmu_status_t tmu_monitor(int *temp)
+{
+	int cur_temp;
+	struct tmu_data *data = &gbl_info.data;
+
+	if (gbl_info.tmu_state == TMU_STATUS_INIT)
+		return TMU_STATUS_INIT;
+
+	/* Read current temperature of the SOC */
+	cur_temp = get_cur_temp(&gbl_info);
+	*temp = cur_temp;
+
+	/* Temperature code lies between min 25 and max 125 */
+	if (cur_temp >= data->ts.start_tripping &&
+			cur_temp <= data->ts.max_val) {
+		return TMU_STATUS_TRIPPED;
+	} else if (cur_temp >= data->ts.start_warning) {
+		return TMU_STATUS_WARNING;
+	} else if (cur_temp < data->ts.start_warning &&
+			cur_temp >= data->ts.min_val) {
+		return TMU_STATUS_NORMAL;
+	} else {
+		/* Temperature code does not lie between min 25 and max 125 */
+		gbl_info.tmu_state = TMU_STATUS_INIT;
+		debug("EXYNOS_TMU: Thermal reading failed\n");
+		return TMU_STATUS_INIT;
+	}
+}
+
+/*
+ * Get TMU specific pre-defined values from FDT
+ *
+ * @param info	pointer to the tmu_info struct
+ * @param blob  FDT blob
+ * @return	int value, 0 for success
+ */
+static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
+{
+#ifdef CONFIG_OF_CONTROL
+	int node;
+	int error = 0;
+
+	/* Get the node from FDT for TMU */
+	node = fdtdec_next_compatible(blob, 0,
+				      COMPAT_SAMSUNG_EXYNOS_TMU);
+	if (node < 0) {
+		debug("EXYNOS_TMU: No node for tmu in device tree\n");
+		return -1;
+	}
+
+	/*
+	 * Get the pre-defined TMU specific values from FDT.
+	 * All of these are expected to be correct otherwise
+	 * miscalculation of register values in tmu_setup_parameters
+	 * may result in misleading current temperature.
+	 */
+	info->tmu_base = fdtdec_get_addr(blob, node, "reg");
+	if (info->tmu_base == FDT_ADDR_T_NONE) {
+		debug("%s: Missing tmu-base\n", __func__);
+		return -1;
+	}
+	info->data.ts.min_val = fdtdec_get_int(blob,
+				node, "samsung,min-temp", -1);
+	error |= info->data.ts.min_val;
+	info->data.ts.max_val = fdtdec_get_int(blob,
+				node, "samsung,max-temp", -1);
+	error |= info->data.ts.max_val;
+	info->data.ts.start_warning = fdtdec_get_int(blob,
+				node, "samsung,start-warning", -1);
+	error |= info->data.ts.start_warning;
+	info->data.ts.start_tripping = fdtdec_get_int(blob,
+				node, "samsung,start-tripping", -1);
+	error |= info->data.ts.start_tripping;
+	info->data.ts.hardware_tripping = fdtdec_get_int(blob,
+				node, "samsung,hw-tripping", -1);
+	error |= info->data.ts.hardware_tripping;
+	info->data.efuse_min_value = fdtdec_get_int(blob,
+				node, "samsung,efuse-min-value", -1);
+	error |= info->data.efuse_min_value;
+	info->data.efuse_value = fdtdec_get_int(blob,
+				node, "samsung,efuse-value", -1);
+	error |= info->data.efuse_value;
+	info->data.efuse_max_value = fdtdec_get_int(blob,
+				node, "samsung,efuse-max-value", -1);
+	error |= info->data.efuse_max_value;
+	info->data.slope = fdtdec_get_int(blob,
+				node, "samsung,slope", -1);
+	error |= info->data.slope;
+	info->dc_value = fdtdec_get_int(blob,
+				node, "samsung,dc-value", -1);
+	error |= info->dc_value;
+
+	if (error == -1) {
+		debug("fail to get tmu node properties\n");
+		return -1;
+	}
+#endif
+
+	return 0;
+}
+
+/*
+ * Calibrate and calculate threshold values and
+ * enable interrupt levels
+ *
+ * @param	info pointer to the tmu_info struct
+ */
+static void tmu_setup_parameters(struct tmu_info *info)
+{
+	unsigned int te_code, con;
+	unsigned int warning_code, trip_code, hwtrip_code;
+	unsigned int cooling_temp;
+	unsigned int rising_value;
+	struct tmu_data *data = &info->data;
+	struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+
+	/* Must reload for reading efuse value from triminfo register */
+	writel(TRIMINFO_RELOAD, &reg->triminfo_control);
+
+	/* Get the compensation parameter */
+	te_code = readl(&reg->triminfo);
+	info->te1 = te_code & TRIM_INFO_MASK;
+	info->te2 = ((te_code >> 8) & TRIM_INFO_MASK);
+
+	if ((data->efuse_min_value > info->te1) ||
+			(info->te1 > data->efuse_max_value)
+			||  (info->te2 != 0))
+		info->te1 = data->efuse_value;
+
+	/* Get RISING & FALLING Threshold value */
+	warning_code = data->ts.start_warning
+			+ info->te1 - info->dc_value;
+	trip_code = data->ts.start_tripping
+			+ info->te1 - info->dc_value;
+	hwtrip_code = data->ts.hardware_tripping
+			+ info->te1 - info->dc_value;
+
+	cooling_temp = 0;
+
+	rising_value = ((warning_code << 8) |
+			(trip_code << 16) |
+			(hwtrip_code << 24));
+
+	/* Set interrupt level */
+	writel(rising_value, &reg->threshold_temp_rise);
+	writel(cooling_temp, &reg->threshold_temp_fall);
+
+	/*
+	 * Init TMU control tuning parameters
+	 * [28:24] VREF - Voltage reference
+	 * [15:13] THERM_TRIP_MODE - Tripping mode
+	 * [12] THERM_TRIP_EN - Thermal tripping enable
+	 * [11:8] BUF_SLOPE_SEL - Gain of amplifier
+	 * [6] THERM_TRIP_BY_TQ_EN - Tripping by TQ pin
+	 */
+	writel(data->slope, &reg->tmu_control);
+
+	writel(INTCLEARALL, &reg->intclear);
+
+	/* TMU core enable */
+	con = readl(&reg->tmu_control);
+	con |= THERM_TRIP_EN | CORE_EN;
+
+	writel(con, &reg->tmu_control);
+
+	/* Enable HW thermal trip */
+	set_hw_thermal_trip();
+
+	/* LEV1 LEV2 interrupt enable */
+	writel(INTEN_RISE1 | INTEN_RISE2, &reg->inten);
+}
+
+/*
+ * Initialize TMU device
+ *
+ * @param blob  FDT blob
+ * @return	int value, 0 for success
+ */
+int tmu_init(const void *blob)
+{
+	gbl_info.tmu_state = TMU_STATUS_INIT;
+	if (get_tmu_fdt_values(&gbl_info, blob) < 0)
+		goto ret;
+
+	tmu_setup_parameters(&gbl_info);
+	gbl_info.tmu_state = TMU_STATUS_NORMAL;
+ret:
+
+	return gbl_info.tmu_state;
+}
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index b2da8b3..ed4e6b3 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -43,7 +43,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 
 	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
 #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
-					defined(CONFIG_AM33XX)
+			defined(CONFIG_AM33XX) || defined(CONFIG_TI814X)
 	serial_out(0x7, &com_port->mdr1);	/* mode select reset TL16C750*/
 #endif
 	serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
@@ -57,7 +57,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 	serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
 	serial_out(UART_LCRVAL, &com_port->lcr);
 #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
-	defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX)
+	defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
+	defined(CONFIG_TI814X)
 
 #if defined(CONFIG_APTIX)
 	/* /13 mode so Aptix 6MHz can hit 115200 */
diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
index 8fdffb1..1987ca1 100644
--- a/drivers/sound/Makefile
+++ b/drivers/sound/Makefile
@@ -28,6 +28,7 @@ LIB	:= $(obj)libsound.o
 COBJS-$(CONFIG_SOUND)	+= sound.o
 COBJS-$(CONFIG_I2S)	+= samsung-i2s.o
 COBJS-$(CONFIG_SOUND_WM8994)	+= wm8994.o
+COBJS-$(CONFIG_SOUND_MAX98095)	+= max98095.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c
new file mode 100644
index 0000000..d69db58
--- /dev/null
+++ b/drivers/sound/max98095.c
@@ -0,0 +1,550 @@
+/*
+ * max98095.c -- MAX98095 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ * Modified for uboot by R. Chandrasekar (rcsekar@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <sound.h>
+#include "i2s.h"
+#include "max98095.h"
+
+enum max98095_type {
+	MAX98095,
+};
+
+struct max98095_priv {
+	enum max98095_type devtype;
+	unsigned int sysclk;
+	unsigned int rate;
+	unsigned int fmt;
+};
+
+static struct sound_codec_info g_codec_info;
+struct max98095_priv g_max98095_info;
+unsigned int g_max98095_i2c_dev_addr;
+
+/* Index 0 is reserved. */
+int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000,
+		88200, 96000};
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param reg	reg number to be write
+ * @param data	data to be writen to the above registor
+ *
+ * @return	int value 1 for change, 0 for no change or negative error code.
+ */
+static int max98095_i2c_write(unsigned int reg, unsigned char data)
+{
+	debug("%s: Write Addr : 0x%02X, Data :  0x%02X\n",
+		__func__, reg, data);
+	return i2c_write(g_max98095_i2c_dev_addr, reg, 1, &data, 1);
+}
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param reg	reg number to be read
+ * @param data	address of read data to be stored
+ *
+ * @return	int value 0 for success, -1 in case of error.
+ */
+static unsigned int max98095_i2c_read(unsigned int reg, unsigned char *data)
+{
+	int ret;
+
+	ret = i2c_read(g_max98095_i2c_dev_addr, reg, 1, data, 1);
+	if (ret != 0) {
+		debug("%s: Error while reading register %#04x\n",
+			__func__, reg);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * update device register bits through i2c
+ *
+ * @param reg	codec register
+ * @param mask	register mask
+ * @param value	new value
+ *
+ * @return int value 0 for success, non-zero error code.
+ */
+static int max98095_update_bits(unsigned int reg, unsigned char mask,
+				unsigned char value)
+{
+	int change, ret = 0;
+	unsigned char old, new;
+
+	if (max98095_i2c_read(reg, &old) != 0)
+		return -1;
+	new = (old & ~mask) | (value & mask);
+	change  = (old != new) ? 1 : 0;
+	if (change)
+		ret = max98095_i2c_write(reg, new);
+	if (ret < 0)
+		return ret;
+
+	return change;
+}
+
+/*
+ * codec mclk clock divider coefficients based on sampling rate
+ *
+ * @param rate sampling rate
+ * @param value address of indexvalue to be stored
+ *
+ * @return	0 for success or negative error code.
+ */
+static int rate_value(int rate, u8 *value)
+{
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
+		if (rate_table[i] >= rate) {
+			*value = i;
+			return 0;
+		}
+	}
+	*value = 1;
+
+	return -1;
+}
+
+/*
+ * Sets hw params for max98095
+ *
+ * @param max98095	max98095 information pointer
+ * @param rate		Sampling rate
+ * @param bits_per_sample	Bits per sample
+ *
+ * @return -1 for error  and 0  Success.
+ */
+static int max98095_hw_params(struct max98095_priv *max98095,
+		unsigned int rate, unsigned int bits_per_sample)
+{
+	u8 regval;
+	int error;
+
+	switch (bits_per_sample) {
+	case 16:
+		error = max98095_update_bits(M98095_034_DAI2_FORMAT,
+			M98095_DAI_WS, 0);
+		break;
+	case 24:
+		error = max98095_update_bits(M98095_034_DAI2_FORMAT,
+			M98095_DAI_WS, M98095_DAI_WS);
+		break;
+	default:
+		debug("%s: Illegal bits per sample %d.\n",
+			__func__, bits_per_sample);
+		return -1;
+	}
+
+	if (rate_value(rate, &regval)) {
+		debug("%s: Failed to set sample rate to %d.\n",
+			__func__, rate);
+		return -1;
+	}
+	max98095->rate = rate;
+
+	error |= max98095_update_bits(M98095_031_DAI2_CLKMODE,
+		M98095_CLKMODE_MASK, regval);
+
+	/* Update sample rate mode */
+	if (rate < 50000)
+		error |= max98095_update_bits(M98095_038_DAI2_FILTERS,
+			M98095_DAI_DHF, 0);
+	else
+		error |= max98095_update_bits(M98095_038_DAI2_FILTERS,
+			M98095_DAI_DHF, M98095_DAI_DHF);
+
+	if (error < 0) {
+		debug("%s: Error setting hardware params.\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Configures Audio interface system clock for the given frequency
+ *
+ * @param max98095	max98095 information
+ * @param freq		Sampling frequency in Hz
+ *
+ * @return -1 for error and 0 success.
+ */
+static int max98095_set_sysclk(struct max98095_priv *max98095,
+				unsigned int freq)
+{
+	int error = 0;
+
+	/* Requested clock frequency is already setup */
+	if (freq == max98095->sysclk)
+		return 0;
+
+	/* Setup clocks for slave mode, and using the PLL
+	 * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
+	 *	0x02 (when master clk is 20MHz to 40MHz)..
+	 *	0x03 (when master clk is 40MHz to 60MHz)..
+	 */
+	if ((freq >= 10000000) && (freq < 20000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x10);
+	} else if ((freq >= 20000000) && (freq < 40000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x20);
+	} else if ((freq >= 40000000) && (freq < 60000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x30);
+	} else {
+		debug("%s: Invalid master clock frequency\n", __func__);
+		return -1;
+	}
+
+	debug("%s: Clock at %uHz\n", __func__, freq);
+
+	if (error < 0)
+		return -1;
+
+	max98095->sysclk = freq;
+	return 0;
+}
+
+/*
+ * Sets Max98095 I2S format
+ *
+ * @param max98095	max98095 information
+ * @param fmt		i2S format - supports a subset of the options defined
+ *			in i2s.h.
+ *
+ * @return -1 for error and 0  Success.
+ */
+static int max98095_set_fmt(struct max98095_priv *max98095, int fmt)
+{
+	u8 regval = 0;
+	int error = 0;
+
+	if (fmt == max98095->fmt)
+		return 0;
+
+	max98095->fmt = fmt;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Slave mode PLL */
+		error |= max98095_i2c_write(M98095_032_DAI2_CLKCFG_HI,
+					0x80);
+		error |= max98095_i2c_write(M98095_033_DAI2_CLKCFG_LO,
+					0x00);
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* Set to master mode */
+		regval |= M98095_DAI_MAS;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+	case SND_SOC_DAIFMT_CBM_CFS:
+	default:
+		debug("%s: Clock mode unsupported\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		regval |= M98095_DAI_DLY;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		break;
+	default:
+		debug("%s: Unrecognized format.\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		regval |= M98095_DAI_WCI;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		regval |= M98095_DAI_BCI;
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		regval |= M98095_DAI_BCI | M98095_DAI_WCI;
+		break;
+	default:
+		debug("%s: Unrecognized inversion settings.\n", __func__);
+		return -1;
+	}
+
+	error |= max98095_update_bits(M98095_034_DAI2_FORMAT,
+		M98095_DAI_MAS | M98095_DAI_DLY | M98095_DAI_BCI |
+		M98095_DAI_WCI, regval);
+
+	error |= max98095_i2c_write(M98095_035_DAI2_CLOCK,
+		M98095_DAI_BSEL64);
+
+	if (error < 0) {
+		debug("%s: Error setting i2s format.\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * resets the audio codec
+ *
+ * @return -1 for error and 0 success.
+ */
+static int max98095_reset(void)
+{
+	int i, ret;
+
+	/*
+	 * Gracefully reset the DSP core and the codec hardware in a proper
+	 * sequence.
+	 */
+	ret = max98095_i2c_write(M98095_00F_HOST_CFG, 0);
+	if (ret != 0) {
+		debug("%s: Failed to reset DSP: %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = max98095_i2c_write(M98095_097_PWR_SYS, 0);
+	if (ret != 0) {
+		debug("%s: Failed to reset codec: %d\n", __func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Reset to hardware default for registers, as there is not a soft
+	 * reset hardware control register.
+	 */
+	for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) {
+		ret = max98095_i2c_write(i, 0);
+		if (ret < 0) {
+			debug("%s: Failed to reset: %d\n", __func__, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Intialise max98095 codec device
+ *
+ * @param max98095	max98095 information
+ *
+ * @returns -1 for error  and 0 Success.
+ */
+static int max98095_device_init(struct max98095_priv *max98095)
+{
+	unsigned char id;
+	int error = 0;
+
+	/* reset the codec, the DSP core, and disable all interrupts */
+	error = max98095_reset();
+	if (error != 0) {
+		debug("Reset\n");
+		return error;
+	}
+
+	/* initialize private data */
+	max98095->sysclk = -1U;
+	max98095->rate = -1U;
+	max98095->fmt = -1U;
+
+	error = max98095_i2c_read(M98095_0FF_REV_ID, &id);
+	if (error < 0) {
+		debug("%s: Failure reading hardware revision: %d\n",
+			__func__, id);
+		goto err_access;
+	}
+	debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A');
+
+	error |= max98095_i2c_write(M98095_097_PWR_SYS, M98095_PWRSV);
+
+	/*
+	 * initialize registers to hardware default configuring audio
+	 * interface2 to DAC
+	 */
+	error |= max98095_i2c_write(M98095_048_MIX_DAC_LR,
+		M98095_DAI2M_TO_DACL|M98095_DAI2M_TO_DACR);
+
+	error |= max98095_i2c_write(M98095_092_PWR_EN_OUT,
+			M98095_SPK_SPREADSPECTRUM);
+	error |= max98095_i2c_write(M98095_045_CFG_DSP, M98095_DSPNORMAL);
+	error |= max98095_i2c_write(M98095_04E_CFG_HP, M98095_HPNORMAL);
+
+	error |= max98095_i2c_write(M98095_02C_DAI1_IOCFG,
+			M98095_S1NORMAL|M98095_SDATA);
+
+	error |= max98095_i2c_write(M98095_036_DAI2_IOCFG,
+			M98095_S2NORMAL|M98095_SDATA);
+
+	error |= max98095_i2c_write(M98095_040_DAI3_IOCFG,
+			M98095_S3NORMAL|M98095_SDATA);
+
+	/* take the codec out of the shut down */
+	error |= max98095_update_bits(M98095_097_PWR_SYS, M98095_SHDNRUN,
+			M98095_SHDNRUN);
+	/* route DACL and DACR output to HO and Spekers */
+	error |= max98095_i2c_write(M98095_050_MIX_SPK_LEFT, 0x01); /* DACL */
+	error |= max98095_i2c_write(M98095_051_MIX_SPK_RIGHT, 0x01);/* DACR */
+	error |= max98095_i2c_write(M98095_04C_MIX_HP_LEFT, 0x01);  /* DACL */
+	error |= max98095_i2c_write(M98095_04D_MIX_HP_RIGHT, 0x01); /* DACR */
+
+	/* power Enable */
+	error |= max98095_i2c_write(M98095_091_PWR_EN_OUT, 0xF3);
+
+	/* set Volume */
+	error |= max98095_i2c_write(M98095_064_LVL_HP_L, 15);
+	error |= max98095_i2c_write(M98095_065_LVL_HP_R, 15);
+	error |= max98095_i2c_write(M98095_067_LVL_SPK_L, 16);
+	error |= max98095_i2c_write(M98095_068_LVL_SPK_R, 16);
+
+	/* Enable DAIs */
+	error |= max98095_i2c_write(M98095_093_BIAS_CTRL, 0x30);
+	error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x07);
+
+err_access:
+	if (error < 0)
+		return -1;
+
+	return 0;
+}
+
+static int max98095_do_init(struct sound_codec_info *pcodec_info,
+			int sampling_rate, int mclk_freq,
+			int bits_per_sample)
+{
+	int ret = 0;
+
+	/* Enable codec clock */
+	set_xclkout();
+
+	/* shift the device address by 1 for 7 bit addressing */
+	g_max98095_i2c_dev_addr = pcodec_info->i2c_dev_addr >> 1;
+
+	if (pcodec_info->codec_type == CODEC_MAX_98095)
+		g_max98095_info.devtype = MAX98095;
+	else {
+		debug("%s: Codec id [%d] not defined\n", __func__,
+				pcodec_info->codec_type);
+		return -1;
+	}
+
+	ret = max98095_device_init(&g_max98095_info);
+	if (ret < 0) {
+		debug("%s: max98095 codec chip init failed\n", __func__);
+		return ret;
+	}
+
+	ret = max98095_set_sysclk(&g_max98095_info, mclk_freq);
+	if (ret < 0) {
+		debug("%s: max98095 codec set sys clock failed\n", __func__);
+		return ret;
+	}
+
+	ret = max98095_hw_params(&g_max98095_info, sampling_rate,
+				bits_per_sample);
+
+	if (ret == 0) {
+		ret = max98095_set_fmt(&g_max98095_info,
+					SND_SOC_DAIFMT_I2S |
+					SND_SOC_DAIFMT_NB_NF |
+					SND_SOC_DAIFMT_CBS_CFS);
+	}
+
+	return ret;
+}
+
+static int get_max98095_codec_values(struct sound_codec_info *pcodec_info,
+				const void *blob)
+{
+	int error = 0;
+#ifdef CONFIG_OF_CONTROL
+	enum fdt_compat_id compat;
+	int node;
+	int parent;
+
+	/* Get the node from FDT for codec */
+	node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_98095_CODEC);
+	if (node <= 0) {
+		debug("EXYNOS_SOUND: No node for codec in device tree\n");
+		debug("node = %d\n", node);
+		return -1;
+	}
+
+	parent = fdt_parent_offset(blob, node);
+	if (parent < 0) {
+		debug("%s: Cannot find node parent\n", __func__);
+		return -1;
+	}
+
+	compat = fdtdec_lookup(blob, parent);
+	switch (compat) {
+	case COMPAT_SAMSUNG_S3C2440_I2C:
+		pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
+		error |= pcodec_info->i2c_bus;
+		debug("i2c bus = %d\n", pcodec_info->i2c_bus);
+		pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
+							"reg", 0);
+		error |= pcodec_info->i2c_dev_addr;
+		debug("i2c dev addr = %x\n", pcodec_info->i2c_dev_addr);
+		break;
+	default:
+		debug("%s: Unknown compat id %d\n", __func__, compat);
+		return -1;
+	}
+#else
+	pcodec_info->i2c_bus = AUDIO_I2C_BUS;
+	pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
+	debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+#endif
+	pcodec_info->codec_type = CODEC_MAX_98095;
+	if (error == -1) {
+		debug("fail to get max98095 codec node properties\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/* max98095 Device Initialisation */
+int max98095_init(const void *blob, int sampling_rate, int mclk_freq,
+			int bits_per_sample)
+{
+	int ret;
+	int old_bus = i2c_get_bus_num();
+	struct sound_codec_info *pcodec_info = &g_codec_info;
+
+	if (get_max98095_codec_values(pcodec_info, blob) < 0) {
+		debug("FDT Codec values failed\n");
+		 return -1;
+	}
+
+	i2c_set_bus_num(pcodec_info->i2c_bus);
+	ret = max98095_do_init(pcodec_info, sampling_rate, mclk_freq,
+				bits_per_sample);
+	i2c_set_bus_num(old_bus);
+
+	return ret;
+}
diff --git a/drivers/sound/max98095.h b/drivers/sound/max98095.h
new file mode 100644
index 0000000..ae5eb14
--- /dev/null
+++ b/drivers/sound/max98095.h
@@ -0,0 +1,311 @@
+/*
+ * max98095.h -- MAX98095 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MAX98095_H
+#define _MAX98095_H
+
+/*
+ * MAX98095 Registers Definition
+ */
+
+#define M98095_000_HOST_DATA		0x00
+#define M98095_001_HOST_INT_STS		0x01
+#define M98095_002_HOST_RSP_STS		0x02
+#define M98095_003_HOST_CMD_STS		0x03
+#define M98095_004_CODEC_STS		0x04
+#define M98095_005_DAI1_ALC_STS		0x05
+#define M98095_006_DAI2_ALC_STS		0x06
+#define M98095_007_JACK_AUTO_STS	0x07
+#define M98095_008_JACK_MANUAL_STS	0x08
+#define M98095_009_JACK_VBAT_STS	0x09
+#define M98095_00A_ACC_ADC_STS		0x0A
+#define M98095_00B_MIC_NG_AGC_STS	0x0B
+#define M98095_00C_SPK_L_VOLT_STS	0x0C
+#define M98095_00D_SPK_R_VOLT_STS	0x0D
+#define M98095_00E_TEMP_SENSOR_STS	0x0E
+#define M98095_00F_HOST_CFG		0x0F
+#define M98095_010_HOST_INT_CFG		0x10
+#define M98095_011_HOST_INT_EN		0x11
+#define M98095_012_CODEC_INT_EN		0x12
+#define M98095_013_JACK_INT_EN		0x13
+#define M98095_014_JACK_INT_EN		0x14
+#define M98095_015_DEC			0x15
+#define M98095_016_RESERVED		0x16
+#define M98095_017_RESERVED		0x17
+#define M98095_018_KEYCODE3		0x18
+#define M98095_019_KEYCODE2		0x19
+#define M98095_01A_KEYCODE1		0x1A
+#define M98095_01B_KEYCODE0		0x1B
+#define M98095_01C_OEMCODE1		0x1C
+#define M98095_01D_OEMCODE0		0x1D
+#define M98095_01E_XCFG1		0x1E
+#define M98095_01F_XCFG2		0x1F
+#define M98095_020_XCFG3		0x20
+#define M98095_021_XCFG4		0x21
+#define M98095_022_XCFG5		0x22
+#define M98095_023_XCFG6		0x23
+#define M98095_024_XGPIO		0x24
+#define M98095_025_XCLKCFG		0x25
+#define M98095_026_SYS_CLK		0x26
+#define M98095_027_DAI1_CLKMODE		0x27
+#define M98095_028_DAI1_CLKCFG_HI	0x28
+#define M98095_029_DAI1_CLKCFG_LO	0x29
+#define M98095_02A_DAI1_FORMAT		0x2A
+#define M98095_02B_DAI1_CLOCK		0x2B
+#define M98095_02C_DAI1_IOCFG		0x2C
+#define M98095_02D_DAI1_TDM		0x2D
+#define M98095_02E_DAI1_FILTERS		0x2E
+#define M98095_02F_DAI1_LVL1		0x2F
+#define M98095_030_DAI1_LVL2		0x30
+#define M98095_031_DAI2_CLKMODE		0x31
+#define M98095_032_DAI2_CLKCFG_HI	0x32
+#define M98095_033_DAI2_CLKCFG_LO	0x33
+#define M98095_034_DAI2_FORMAT		0x34
+#define M98095_035_DAI2_CLOCK		0x35
+#define M98095_036_DAI2_IOCFG		0x36
+#define M98095_037_DAI2_TDM		0x37
+#define M98095_038_DAI2_FILTERS		0x38
+#define M98095_039_DAI2_LVL1		0x39
+#define M98095_03A_DAI2_LVL2		0x3A
+#define M98095_03B_DAI3_CLKMODE		0x3B
+#define M98095_03C_DAI3_CLKCFG_HI	0x3C
+#define M98095_03D_DAI3_CLKCFG_LO	0x3D
+#define M98095_03E_DAI3_FORMAT		0x3E
+#define M98095_03F_DAI3_CLOCK		0x3F
+#define M98095_040_DAI3_IOCFG		0x40
+#define M98095_041_DAI3_TDM		0x41
+#define M98095_042_DAI3_FILTERS		0x42
+#define M98095_043_DAI3_LVL1		0x43
+#define M98095_044_DAI3_LVL2		0x44
+#define M98095_045_CFG_DSP		0x45
+#define M98095_046_DAC_CTRL1		0x46
+#define M98095_047_DAC_CTRL2		0x47
+#define M98095_048_MIX_DAC_LR		0x48
+#define M98095_049_MIX_DAC_M		0x49
+#define M98095_04A_MIX_ADC_LEFT		0x4A
+#define M98095_04B_MIX_ADC_RIGHT	0x4B
+#define M98095_04C_MIX_HP_LEFT		0x4C
+#define M98095_04D_MIX_HP_RIGHT		0x4D
+#define M98095_04E_CFG_HP		0x4E
+#define M98095_04F_MIX_RCV		0x4F
+#define M98095_050_MIX_SPK_LEFT		0x50
+#define M98095_051_MIX_SPK_RIGHT	0x51
+#define M98095_052_MIX_SPK_CFG		0x52
+#define M98095_053_MIX_LINEOUT1		0x53
+#define M98095_054_MIX_LINEOUT2		0x54
+#define M98095_055_MIX_LINEOUT_CFG	0x55
+#define M98095_056_LVL_SIDETONE_DAI12	0x56
+#define M98095_057_LVL_SIDETONE_DAI3	0x57
+#define M98095_058_LVL_DAI1_PLAY	0x58
+#define M98095_059_LVL_DAI1_EQ		0x59
+#define M98095_05A_LVL_DAI2_PLAY	0x5A
+#define M98095_05B_LVL_DAI2_EQ		0x5B
+#define M98095_05C_LVL_DAI3_PLAY	0x5C
+#define M98095_05D_LVL_ADC_L		0x5D
+#define M98095_05E_LVL_ADC_R		0x5E
+#define M98095_05F_LVL_MIC1		0x5F
+#define M98095_060_LVL_MIC2		0x60
+#define M98095_061_LVL_LINEIN		0x61
+#define M98095_062_LVL_LINEOUT1		0x62
+#define M98095_063_LVL_LINEOUT2		0x63
+#define M98095_064_LVL_HP_L		0x64
+#define M98095_065_LVL_HP_R		0x65
+#define M98095_066_LVL_RCV		0x66
+#define M98095_067_LVL_SPK_L		0x67
+#define M98095_068_LVL_SPK_R		0x68
+#define M98095_069_MICAGC_CFG		0x69
+#define M98095_06A_MICAGC_THRESH	0x6A
+#define M98095_06B_SPK_NOISEGATE	0x6B
+#define M98095_06C_DAI1_ALC1_TIME	0x6C
+#define M98095_06D_DAI1_ALC1_COMP	0x6D
+#define M98095_06E_DAI1_ALC1_EXPN	0x6E
+#define M98095_06F_DAI1_ALC1_GAIN	0x6F
+#define M98095_070_DAI1_ALC2_TIME	0x70
+#define M98095_071_DAI1_ALC2_COMP	0x71
+#define M98095_072_DAI1_ALC2_EXPN	0x72
+#define M98095_073_DAI1_ALC2_GAIN	0x73
+#define M98095_074_DAI1_ALC3_TIME	0x74
+#define M98095_075_DAI1_ALC3_COMP	0x75
+#define M98095_076_DAI1_ALC3_EXPN	0x76
+#define M98095_077_DAI1_ALC3_GAIN	0x77
+#define M98095_078_DAI2_ALC1_TIME	0x78
+#define M98095_079_DAI2_ALC1_COMP	0x79
+#define M98095_07A_DAI2_ALC1_EXPN	0x7A
+#define M98095_07B_DAI2_ALC1_GAIN	0x7B
+#define M98095_07C_DAI2_ALC2_TIME	0x7C
+#define M98095_07D_DAI2_ALC2_COMP	0x7D
+#define M98095_07E_DAI2_ALC2_EXPN	0x7E
+#define M98095_07F_DAI2_ALC2_GAIN	0x7F
+#define M98095_080_DAI2_ALC3_TIME	0x80
+#define M98095_081_DAI2_ALC3_COMP	0x81
+#define M98095_082_DAI2_ALC3_EXPN	0x82
+#define M98095_083_DAI2_ALC3_GAIN	0x83
+#define M98095_084_HP_NOISE_GATE	0x84
+#define M98095_085_AUX_ADC		0x85
+#define M98095_086_CFG_LINE		0x86
+#define M98095_087_CFG_MIC		0x87
+#define M98095_088_CFG_LEVEL		0x88
+#define M98095_089_JACK_DET_AUTO	0x89
+#define M98095_08A_JACK_DET_MANUAL	0x8A
+#define M98095_08B_JACK_KEYSCAN_DBC	0x8B
+#define M98095_08C_JACK_KEYSCAN_DLY	0x8C
+#define M98095_08D_JACK_KEY_THRESH	0x8D
+#define M98095_08E_JACK_DC_SLEW		0x8E
+#define M98095_08F_JACK_TEST_CFG	0x8F
+#define M98095_090_PWR_EN_IN		0x90
+#define M98095_091_PWR_EN_OUT		0x91
+#define M98095_092_PWR_EN_OUT		0x92
+#define M98095_093_BIAS_CTRL		0x93
+#define M98095_094_PWR_DAC_21		0x94
+#define M98095_095_PWR_DAC_03		0x95
+#define M98095_096_PWR_DAC_CK		0x96
+#define M98095_097_PWR_SYS		0x97
+
+#define M98095_0FF_REV_ID		0xFF
+
+#define M98095_REG_CNT			(0xFF+1)
+#define M98095_REG_MAX_CACHED		0X97
+
+/* MAX98095 Registers Bit Fields */
+
+/* M98095_00F_HOST_CFG */
+#define M98095_SEG			(1<<0)
+#define M98095_XTEN			(1<<1)
+#define M98095_MDLLEN			(1<<2)
+
+/* M98095_027_DAI1_CLKMODE, M98095_031_DAI2_CLKMODE, M98095_03B_DAI3_CLKMODE */
+#define M98095_CLKMODE_MASK		0xFF
+
+/* M98095_02A_DAI1_FORMAT, M98095_034_DAI2_FORMAT, M98095_03E_DAI3_FORMAT */
+#define M98095_DAI_MAS			(1<<7)
+#define M98095_DAI_WCI			(1<<6)
+#define M98095_DAI_BCI			(1<<5)
+#define M98095_DAI_DLY			(1<<4)
+#define M98095_DAI_TDM			(1<<2)
+#define M98095_DAI_FSW			(1<<1)
+#define M98095_DAI_WS			(1<<0)
+
+/* M98095_02B_DAI1_CLOCK, M98095_035_DAI2_CLOCK, M98095_03F_DAI3_CLOCK */
+#define M98095_DAI_BSEL64		(1<<0)
+#define M98095_DAI_DOSR_DIV2		(0<<5)
+#define M98095_DAI_DOSR_DIV4		(1<<5)
+
+/* M98095_02C_DAI1_IOCFG, M98095_036_DAI2_IOCFG, M98095_040_DAI3_IOCFG */
+#define M98095_S1NORMAL			(1<<6)
+#define M98095_S2NORMAL			(2<<6)
+#define M98095_S3NORMAL			(3<<6)
+#define M98095_SDATA			(3<<0)
+
+/* M98095_02E_DAI1_FILTERS, M98095_038_DAI2_FILTERS, M98095_042_DAI3_FILTERS */
+#define M98095_DAI_DHF			(1<<3)
+
+/* M98095_045_DSP_CFG */
+#define M98095_DSPNORMAL		(5<<4)
+
+/* M98095_048_MIX_DAC_LR */
+#define M98095_DAI1L_TO_DACR		(1<<7)
+#define M98095_DAI1R_TO_DACR		(1<<6)
+#define M98095_DAI2M_TO_DACR		(1<<5)
+#define M98095_DAI1L_TO_DACL		(1<<3)
+#define M98095_DAI1R_TO_DACL		(1<<2)
+#define M98095_DAI2M_TO_DACL		(1<<1)
+#define M98095_DAI3M_TO_DACL		(1<<0)
+
+/* M98095_049_MIX_DAC_M */
+#define M98095_DAI1L_TO_DACM		(1<<3)
+#define M98095_DAI1R_TO_DACM		(1<<2)
+#define M98095_DAI2M_TO_DACM		(1<<1)
+#define M98095_DAI3M_TO_DACM		(1<<0)
+
+/* M98095_04E_MIX_HP_CFG */
+#define M98095_HPNORMAL			(3<<4)
+
+/* M98095_05F_LVL_MIC1, M98095_060_LVL_MIC2 */
+#define M98095_MICPRE_MASK		(3<<5)
+#define M98095_MICPRE_SHIFT		5
+
+/* M98095_064_LVL_HP_L, M98095_065_LVL_HP_R */
+#define M98095_HP_MUTE			(1<<7)
+
+/* M98095_066_LVL_RCV */
+#define M98095_REC_MUTE			(1<<7)
+
+/* M98095_067_LVL_SPK_L, M98095_068_LVL_SPK_R */
+#define M98095_SP_MUTE			(1<<7)
+
+/* M98095_087_CFG_MIC */
+#define M98095_MICSEL_MASK		(3<<0)
+#define M98095_DIGMIC_L			(1<<2)
+#define M98095_DIGMIC_R			(1<<3)
+#define M98095_DIGMIC2L			(1<<4)
+#define M98095_DIGMIC2R			(1<<5)
+
+/* M98095_088_CFG_LEVEL */
+#define M98095_VSEN			(1<<6)
+#define M98095_ZDEN			(1<<5)
+#define M98095_BQ2EN			(1<<3)
+#define M98095_BQ1EN			(1<<2)
+#define M98095_EQ2EN			(1<<1)
+#define M98095_EQ1EN			(1<<0)
+
+/* M98095_090_PWR_EN_IN */
+#define M98095_INEN			(1<<7)
+#define M98095_MB2EN			(1<<3)
+#define M98095_MB1EN			(1<<2)
+#define M98095_MBEN			(3<<2)
+#define M98095_ADREN			(1<<1)
+#define M98095_ADLEN			(1<<0)
+
+/* M98095_091_PWR_EN_OUT */
+#define M98095_HPLEN			(1<<7)
+#define M98095_HPREN			(1<<6)
+#define M98095_SPLEN			(1<<5)
+#define M98095_SPREN			(1<<4)
+#define M98095_RECEN			(1<<3)
+#define M98095_DALEN			(1<<1)
+#define M98095_DAREN			(1<<0)
+
+/* M98095_092_PWR_EN_OUT */
+#define M98095_SPK_FIXEDSPECTRUM	(0<<4)
+#define M98095_SPK_SPREADSPECTRUM	(1<<4)
+
+/* M98095_097_PWR_SYS */
+#define M98095_SHDNRUN			(1<<7)
+#define M98095_PERFMODE			(1<<3)
+#define M98095_HPPLYBACK		(1<<2)
+#define M98095_PWRSV8K			(1<<1)
+#define M98095_PWRSV			(1<<0)
+
+#define M98095_COEFS_PER_BAND		5
+
+/* Equalizer filter coefficients */
+#define M98095_110_DAI1_EQ_BASE		0x10
+#define M98095_142_DAI2_EQ_BASE		0x42
+
+/* Biquad filter coefficients */
+#define M98095_174_DAI1_BQ_BASE		0x74
+#define M98095_17E_DAI2_BQ_BASE		0x7E
+
+/* function prototype */
+
+/*
+ * intialise max98095 sound codec device for the given configuration
+ *
+ * @param blob			FDT node for codec values
+ * @param sampling_rate		Sampling rate (Hz)
+ * @param mclk_freq		MCLK Frequency (Hz)
+ * @param bits_per_sample	bits per Sample (must be 16 or 24)
+ *
+ * @returns -1 for error and 0 Success.
+ */
+int max98095_init(const void *blob, int sampling_rate, int mclk_freq,
+			int bits_per_sample);
+
+#endif
diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c
index fa8432d..a4bf4ad 100644
--- a/drivers/sound/sound.c
+++ b/drivers/sound/sound.c
@@ -31,6 +31,7 @@
 #include <sound.h>
 #include <asm/arch/sound.h>
 #include "wm8994.h"
+#include "max98095.h"
 
 /* defines */
 #define SOUND_400_HZ 400
@@ -149,11 +150,15 @@ static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
 			pi2s_tx->samplingrate,
 			(pi2s_tx->samplingrate * (pi2s_tx->rfs)),
 			pi2s_tx->bitspersample, pi2s_tx->channels);
+	} else if (!strcmp(codectype, "max98095")) {
+		ret = max98095_init(blob, pi2s_tx->samplingrate,
+				(pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+				pi2s_tx->bitspersample);
 	} else {
-		debug("%s: Unknown code type %s\n", __func__,
-		      codectype);
+		debug("%s: Unknown codec type %s\n", __func__, codectype);
 		return -1;
 	}
+
 	if (ret) {
 		debug("%s: Codec init failed\n", __func__);
 		return -1;
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 4268595..d08609e 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -50,8 +50,10 @@ COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
 COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
 COBJS-$(CONFIG_SH_SPI) += sh_spi.o
 COBJS-$(CONFIG_FSL_ESPI) += fsl_espi.o
-COBJS-$(CONFIG_TEGRA_SPI) += tegra_spi.o
-COBJS-$(CONFIG_TEGRA_SLINK) += tegra_slink.o
+COBJS-$(CONFIG_FDT_SPI) += fdt_spi.o
+COBJS-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
+COBJS-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
+COBJS-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
 COBJS-$(CONFIG_XILINX_SPI) += xilinx_spi.o
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/spi/fdt_spi.c b/drivers/spi/fdt_spi.c
new file mode 100644
index 0000000..58f139a
--- /dev/null
+++ b/drivers/spi/fdt_spi.c
@@ -0,0 +1,186 @@
+/*
+ * Common fdt based SPI driver front end
+ *
+ * Copyright (c) 2013 NVIDIA Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra20/tegra20_sflash.h>
+#include <asm/arch-tegra20/tegra20_slink.h>
+#include <asm/arch-tegra114/tegra114_spi.h>
+#include <spi.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct fdt_spi_driver {
+	int compat;
+	int max_ctrls;
+	int (*init)(int *node_list, int count);
+	int (*claim_bus)(struct spi_slave *slave);
+	int (*release_bus)(struct spi_slave *slave);
+	int (*cs_is_valid)(unsigned int bus, unsigned int cs);
+	struct spi_slave *(*setup_slave)(unsigned int bus, unsigned int cs,
+					unsigned int max_hz, unsigned int mode);
+	void (*free_slave)(struct spi_slave *slave);
+	void (*cs_activate)(struct spi_slave *slave);
+	void (*cs_deactivate)(struct spi_slave *slave);
+	int (*xfer)(struct spi_slave *slave, unsigned int bitlen,
+		    const void *data_out, void *data_in, unsigned long flags);
+};
+
+static struct fdt_spi_driver fdt_spi_drivers[] = {
+#ifdef CONFIG_TEGRA20_SFLASH
+	{
+		.compat		= COMPAT_NVIDIA_TEGRA20_SFLASH,
+		.max_ctrls	= 1,
+		.init		= tegra20_spi_init,
+		.claim_bus	= tegra20_spi_claim_bus,
+		.cs_is_valid	= tegra20_spi_cs_is_valid,
+		.setup_slave	= tegra20_spi_setup_slave,
+		.free_slave	= tegra20_spi_free_slave,
+		.cs_activate	= tegra20_spi_cs_activate,
+		.cs_deactivate	= tegra20_spi_cs_deactivate,
+		.xfer		= tegra20_spi_xfer,
+	},
+#endif
+#ifdef CONFIG_TEGRA20_SLINK
+	{
+		.compat		= COMPAT_NVIDIA_TEGRA20_SLINK,
+		.max_ctrls	= CONFIG_TEGRA_SLINK_CTRLS,
+		.init		= tegra30_spi_init,
+		.claim_bus	= tegra30_spi_claim_bus,
+		.cs_is_valid	= tegra30_spi_cs_is_valid,
+		.setup_slave	= tegra30_spi_setup_slave,
+		.free_slave	= tegra30_spi_free_slave,
+		.cs_activate	= tegra30_spi_cs_activate,
+		.cs_deactivate	= tegra30_spi_cs_deactivate,
+		.xfer		= tegra30_spi_xfer,
+	},
+#endif
+#ifdef CONFIG_TEGRA114_SPI
+	{
+		.compat		= COMPAT_NVIDIA_TEGRA114_SPI,
+		.max_ctrls	= CONFIG_TEGRA114_SPI_CTRLS,
+		.init		= tegra114_spi_init,
+		.claim_bus	= tegra114_spi_claim_bus,
+		.cs_is_valid	= tegra114_spi_cs_is_valid,
+		.setup_slave	= tegra114_spi_setup_slave,
+		.free_slave	= tegra114_spi_free_slave,
+		.cs_activate	= tegra114_spi_cs_activate,
+		.cs_deactivate	= tegra114_spi_cs_deactivate,
+		.xfer		= tegra114_spi_xfer,
+	},
+#endif
+};
+
+static struct fdt_spi_driver *driver;
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	if (!driver)
+		return 0;
+	else if (!driver->cs_is_valid)
+		return 1;
+	else
+		return driver->cs_is_valid(bus, cs);
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+		unsigned int max_hz, unsigned int mode)
+{
+	if (!driver || !driver->setup_slave)
+		return NULL;
+
+	return driver->setup_slave(bus, cs, max_hz, mode);
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+	if (driver && driver->free_slave)
+		return driver->free_slave(slave);
+}
+
+static int spi_init_driver(struct fdt_spi_driver *driver)
+{
+	int count;
+	int node_list[driver->max_ctrls];
+
+	count = fdtdec_find_aliases_for_id(gd->fdt_blob, "spi",
+					   driver->compat,
+					   node_list,
+					   driver->max_ctrls);
+	return driver->init(node_list, count);
+}
+
+void spi_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(fdt_spi_drivers); i++) {
+		driver = &fdt_spi_drivers[i];
+		if (!spi_init_driver(driver))
+			break;
+	}
+	if (i == ARRAY_SIZE(fdt_spi_drivers))
+		driver = NULL;
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	if (!driver)
+		return 1;
+	if (!driver->claim_bus)
+		return 0;
+
+	return driver->claim_bus(slave);
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+	if (driver && driver->release_bus)
+		driver->release_bus(slave);
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	if (driver && driver->cs_activate)
+		driver->cs_activate(slave);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	if (driver && driver->cs_deactivate)
+		driver->cs_deactivate(slave);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+	     const void *data_out, void *data_in, unsigned long flags)
+{
+	if (!driver || !driver->xfer)
+		return -1;
+
+	return driver->xfer(slave, bitlen, data_out, data_in, flags);
+}
diff --git a/drivers/spi/tegra114_spi.c b/drivers/spi/tegra114_spi.c
new file mode 100644
index 0000000..b11a0a1
--- /dev/null
+++ b/drivers/spi/tegra114_spi.c
@@ -0,0 +1,405 @@
+/*
+ * NVIDIA Tegra SPI controller (T114 and later)
+ *
+ * Copyright (c) 2010-2013 NVIDIA Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra114/tegra114_spi.h>
+#include <spi.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* COMMAND1 */
+#define SPI_CMD1_GO			(1 << 31)
+#define SPI_CMD1_M_S			(1 << 30)
+#define SPI_CMD1_MODE_MASK		0x3
+#define SPI_CMD1_MODE_SHIFT		28
+#define SPI_CMD1_CS_SEL_MASK		0x3
+#define SPI_CMD1_CS_SEL_SHIFT		26
+#define SPI_CMD1_CS_POL_INACTIVE3	(1 << 25)
+#define SPI_CMD1_CS_POL_INACTIVE2	(1 << 24)
+#define SPI_CMD1_CS_POL_INACTIVE1	(1 << 23)
+#define SPI_CMD1_CS_POL_INACTIVE0	(1 << 22)
+#define SPI_CMD1_CS_SW_HW		(1 << 21)
+#define SPI_CMD1_CS_SW_VAL		(1 << 20)
+#define SPI_CMD1_IDLE_SDA_MASK		0x3
+#define SPI_CMD1_IDLE_SDA_SHIFT		18
+#define SPI_CMD1_BIDIR			(1 << 17)
+#define SPI_CMD1_LSBI_FE		(1 << 16)
+#define SPI_CMD1_LSBY_FE		(1 << 15)
+#define SPI_CMD1_BOTH_EN_BIT		(1 << 14)
+#define SPI_CMD1_BOTH_EN_BYTE		(1 << 13)
+#define SPI_CMD1_RX_EN			(1 << 12)
+#define SPI_CMD1_TX_EN			(1 << 11)
+#define SPI_CMD1_PACKED			(1 << 5)
+#define SPI_CMD1_BIT_LEN_MASK		0x1F
+#define SPI_CMD1_BIT_LEN_SHIFT		0
+
+/* COMMAND2 */
+#define SPI_CMD2_TX_CLK_TAP_DELAY	(1 << 6)
+#define SPI_CMD2_TX_CLK_TAP_DELAY_MASK	(0x3F << 6)
+#define SPI_CMD2_RX_CLK_TAP_DELAY	(1 << 0)
+#define SPI_CMD2_RX_CLK_TAP_DELAY_MASK	(0x3F << 0)
+
+/* TRANSFER STATUS */
+#define SPI_XFER_STS_RDY		(1 << 30)
+
+/* FIFO STATUS */
+#define SPI_FIFO_STS_CS_INACTIVE	(1 << 31)
+#define SPI_FIFO_STS_FRAME_END		(1 << 30)
+#define SPI_FIFO_STS_RX_FIFO_FLUSH	(1 << 15)
+#define SPI_FIFO_STS_TX_FIFO_FLUSH	(1 << 14)
+#define SPI_FIFO_STS_ERR		(1 << 8)
+#define SPI_FIFO_STS_TX_FIFO_OVF	(1 << 7)
+#define SPI_FIFO_STS_TX_FIFO_UNR	(1 << 6)
+#define SPI_FIFO_STS_RX_FIFO_OVF	(1 << 5)
+#define SPI_FIFO_STS_RX_FIFO_UNR	(1 << 4)
+#define SPI_FIFO_STS_TX_FIFO_FULL	(1 << 3)
+#define SPI_FIFO_STS_TX_FIFO_EMPTY	(1 << 2)
+#define SPI_FIFO_STS_RX_FIFO_FULL	(1 << 1)
+#define SPI_FIFO_STS_RX_FIFO_EMPTY	(1 << 0)
+
+#define SPI_TIMEOUT		1000
+#define TEGRA_SPI_MAX_FREQ	52000000
+
+struct spi_regs {
+	u32 command1;	/* 000:SPI_COMMAND1 register */
+	u32 command2;	/* 004:SPI_COMMAND2 register */
+	u32 timing1;	/* 008:SPI_CS_TIM1 register */
+	u32 timing2;	/* 00c:SPI_CS_TIM2 register */
+	u32 xfer_status;/* 010:SPI_TRANS_STATUS register */
+	u32 fifo_status;/* 014:SPI_FIFO_STATUS register */
+	u32 tx_data;	/* 018:SPI_TX_DATA register */
+	u32 rx_data;	/* 01c:SPI_RX_DATA register */
+	u32 dma_ctl;	/* 020:SPI_DMA_CTL register */
+	u32 dma_blk;	/* 024:SPI_DMA_BLK register */
+	u32 rsvd[56];	/* 028-107 reserved */
+	u32 tx_fifo;	/* 108:SPI_FIFO1 register */
+	u32 rsvd2[31];	/* 10c-187 reserved */
+	u32 rx_fifo;	/* 188:SPI_FIFO2 register */
+	u32 spare_ctl;	/* 18c:SPI_SPARE_CTRL register */
+};
+
+struct tegra_spi_ctrl {
+	struct spi_regs *regs;
+	unsigned int freq;
+	unsigned int mode;
+	int periph_id;
+	int valid;
+};
+
+struct tegra_spi_slave {
+	struct spi_slave slave;
+	struct tegra_spi_ctrl *ctrl;
+};
+
+static struct tegra_spi_ctrl spi_ctrls[CONFIG_TEGRA114_SPI_CTRLS];
+
+static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave)
+{
+	return container_of(slave, struct tegra_spi_slave, slave);
+}
+
+int tegra114_spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	if (bus >= CONFIG_TEGRA114_SPI_CTRLS || cs > 3 || !spi_ctrls[bus].valid)
+		return 0;
+	else
+		return 1;
+}
+
+struct spi_slave *tegra114_spi_setup_slave(unsigned int bus, unsigned int cs,
+		unsigned int max_hz, unsigned int mode)
+{
+	struct tegra_spi_slave *spi;
+
+	debug("%s: bus: %u, cs: %u, max_hz: %u, mode: %u\n", __func__,
+		bus, cs, max_hz, mode);
+
+	if (!spi_cs_is_valid(bus, cs)) {
+		printf("SPI error: unsupported bus %d / chip select %d\n",
+		       bus, cs);
+		return NULL;
+	}
+
+	if (max_hz > TEGRA_SPI_MAX_FREQ) {
+		printf("SPI error: unsupported frequency %d Hz. Max frequency"
+			" is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ);
+		return NULL;
+	}
+
+	spi = malloc(sizeof(struct tegra_spi_slave));
+	if (!spi) {
+		printf("SPI error: malloc of SPI structure failed\n");
+		return NULL;
+	}
+	spi->slave.bus = bus;
+	spi->slave.cs = cs;
+	spi->ctrl = &spi_ctrls[bus];
+	if (!spi->ctrl) {
+		printf("SPI error: could not find controller for bus %d\n",
+		       bus);
+		return NULL;
+	}
+
+	if (max_hz < spi->ctrl->freq) {
+		debug("%s: limiting frequency from %u to %u\n", __func__,
+		      spi->ctrl->freq, max_hz);
+		spi->ctrl->freq = max_hz;
+	}
+	spi->ctrl->mode = mode;
+
+	return &spi->slave;
+}
+
+void tegra114_spi_free_slave(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+
+	free(spi);
+}
+
+int tegra114_spi_init(int *node_list, int count)
+{
+	struct tegra_spi_ctrl *ctrl;
+	int i;
+	int node = 0;
+	int found = 0;
+
+	for (i = 0; i < count; i++) {
+		ctrl = &spi_ctrls[i];
+		node = node_list[i];
+
+		ctrl->regs = (struct spi_regs *)fdtdec_get_addr(gd->fdt_blob,
+								 node, "reg");
+		if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) {
+			debug("%s: no spi register found\n", __func__);
+			continue;
+		}
+		ctrl->freq = fdtdec_get_int(gd->fdt_blob, node,
+					    "spi-max-frequency", 0);
+		if (!ctrl->freq) {
+			debug("%s: no spi max frequency found\n", __func__);
+			continue;
+		}
+
+		ctrl->periph_id = clock_decode_periph_id(gd->fdt_blob, node);
+		if (ctrl->periph_id == PERIPH_ID_NONE) {
+			debug("%s: could not decode periph id\n", __func__);
+			continue;
+		}
+		ctrl->valid = 1;
+		found = 1;
+
+		debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
+		      __func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
+	}
+
+	return !found;
+}
+
+int tegra114_spi_claim_bus(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+	struct spi_regs *regs = spi->ctrl->regs;
+
+	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
+	clock_start_periph_pll(spi->ctrl->periph_id, CLOCK_ID_PERIPH,
+			       spi->ctrl->freq);
+
+	/* Clear stale status here */
+	setbits_le32(&regs->fifo_status,
+		     SPI_FIFO_STS_ERR		|
+		     SPI_FIFO_STS_TX_FIFO_OVF	|
+		     SPI_FIFO_STS_TX_FIFO_UNR	|
+		     SPI_FIFO_STS_RX_FIFO_OVF	|
+		     SPI_FIFO_STS_RX_FIFO_UNR	|
+		     SPI_FIFO_STS_TX_FIFO_FULL	|
+		     SPI_FIFO_STS_TX_FIFO_EMPTY	|
+		     SPI_FIFO_STS_RX_FIFO_FULL	|
+		     SPI_FIFO_STS_RX_FIFO_EMPTY);
+	debug("%s: FIFO STATUS = %08x\n", __func__, readl(&regs->fifo_status));
+
+	/* Set master mode and sw controlled CS */
+	setbits_le32(&regs->command1, SPI_CMD1_M_S | SPI_CMD1_CS_SW_HW |
+		     (spi->ctrl->mode << SPI_CMD1_MODE_SHIFT));
+	debug("%s: COMMAND1 = %08x\n", __func__, readl(&regs->command1));
+
+	return 0;
+}
+
+void tegra114_spi_cs_activate(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+	struct spi_regs *regs = spi->ctrl->regs;
+
+	clrbits_le32(&regs->command1, SPI_CMD1_CS_SW_VAL);
+}
+
+void tegra114_spi_cs_deactivate(struct spi_slave *slave)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+	struct spi_regs *regs = spi->ctrl->regs;
+
+	setbits_le32(&regs->command1, SPI_CMD1_CS_SW_VAL);
+}
+
+int tegra114_spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+		const void *data_out, void *data_in, unsigned long flags)
+{
+	struct tegra_spi_slave *spi = to_tegra_spi(slave);
+	struct spi_regs *regs = spi->ctrl->regs;
+	u32 reg, tmpdout, tmpdin = 0;
+	const u8 *dout = data_out;
+	u8 *din = data_in;
+	int num_bytes;
+	int ret;
+
+	debug("%s: slave %u:%u dout %p din %p bitlen %u\n",
+	      __func__, slave->bus, slave->cs, dout, din, bitlen);
+	if (bitlen % 8)
+		return -1;
+	num_bytes = bitlen / 8;
+
+	ret = 0;
+
+	/* clear all error status bits */
+	reg = readl(&regs->fifo_status);
+	writel(reg, &regs->fifo_status);
+
+	/* clear ready bit */
+	setbits_le32(&regs->xfer_status, SPI_XFER_STS_RDY);
+
+	clrsetbits_le32(&regs->command1, SPI_CMD1_CS_SW_VAL,
+			SPI_CMD1_RX_EN | SPI_CMD1_TX_EN | SPI_CMD1_LSBY_FE |
+			(slave->cs << SPI_CMD1_CS_SEL_SHIFT));
+
+	/* set xfer size to 1 block (32 bits) */
+	writel(0, &regs->dma_blk);
+
+	if (flags & SPI_XFER_BEGIN)
+		spi_cs_activate(slave);
+
+	/* handle data in 32-bit chunks */
+	while (num_bytes > 0) {
+		int bytes;
+		int is_read = 0;
+		int tm, i;
+
+		tmpdout = 0;
+		bytes = (num_bytes > 4) ?  4 : num_bytes;
+
+		if (dout != NULL) {
+			for (i = 0; i < bytes; ++i)
+				tmpdout = (tmpdout << 8) | dout[i];
+			dout += bytes;
+		}
+
+		num_bytes -= bytes;
+
+		clrsetbits_le32(&regs->command1,
+				SPI_CMD1_BIT_LEN_MASK << SPI_CMD1_BIT_LEN_SHIFT,
+				(bytes * 8 - 1) << SPI_CMD1_BIT_LEN_SHIFT);
+		writel(tmpdout, &regs->tx_fifo);
+		setbits_le32(&regs->command1, SPI_CMD1_GO);
+
+		/*
+		 * Wait for SPI transmit FIFO to empty, or to time out.
+		 * The RX FIFO status will be read and cleared last
+		 */
+		for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
+			u32 fifo_status, xfer_status;
+
+			fifo_status = readl(&regs->fifo_status);
+
+			/* We can exit when we've had both RX and TX activity */
+			if (is_read &&
+			    (fifo_status & SPI_FIFO_STS_TX_FIFO_EMPTY))
+				break;
+
+			xfer_status = readl(&regs->xfer_status);
+			if (!(xfer_status & SPI_XFER_STS_RDY))
+				continue;
+
+			if (fifo_status & SPI_FIFO_STS_ERR) {
+				debug("%s: got a fifo error: ", __func__);
+				if (fifo_status & SPI_FIFO_STS_TX_FIFO_OVF)
+					debug("tx FIFO overflow ");
+				if (fifo_status & SPI_FIFO_STS_TX_FIFO_UNR)
+					debug("tx FIFO underrun ");
+				if (fifo_status & SPI_FIFO_STS_RX_FIFO_OVF)
+					debug("rx FIFO overflow ");
+				if (fifo_status & SPI_FIFO_STS_RX_FIFO_UNR)
+					debug("rx FIFO underrun ");
+				if (fifo_status & SPI_FIFO_STS_TX_FIFO_FULL)
+					debug("tx FIFO full ");
+				if (fifo_status & SPI_FIFO_STS_TX_FIFO_EMPTY)
+					debug("tx FIFO empty ");
+				if (fifo_status & SPI_FIFO_STS_RX_FIFO_FULL)
+					debug("rx FIFO full ");
+				if (fifo_status & SPI_FIFO_STS_RX_FIFO_EMPTY)
+					debug("rx FIFO empty ");
+				debug("\n");
+				break;
+			}
+
+			if (!(fifo_status & SPI_FIFO_STS_RX_FIFO_EMPTY)) {
+				tmpdin = readl(&regs->rx_fifo);
+				is_read = 1;
+
+				/* swap bytes read in */
+				if (din != NULL) {
+					for (i = bytes - 1; i >= 0; --i) {
+						din[i] = tmpdin & 0xff;
+						tmpdin >>= 8;
+					}
+					din += bytes;
+				}
+			}
+		}
+
+		if (tm >= SPI_TIMEOUT)
+			ret = tm;
+
+		/* clear ACK RDY, etc. bits */
+		writel(readl(&regs->fifo_status), &regs->fifo_status);
+	}
+
+	if (flags & SPI_XFER_END)
+		spi_cs_deactivate(slave);
+
+	debug("%s: transfer ended. Value=%08x, fifo_status = %08x\n",
+	      __func__, tmpdin, readl(&regs->fifo_status));
+
+	if (ret) {
+		printf("%s: timeout during SPI transfer, tm %d\n",
+		       __func__, ret);
+		return -1;
+	}
+
+	return 0;
+}
diff --git a/drivers/spi/tegra_spi.c b/drivers/spi/tegra20_sflash.c
index 05027af..9322ce7 100644
--- a/drivers/spi/tegra_spi.c
+++ b/drivers/spi/tegra20_sflash.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2012 NVIDIA Corporation
+ * Copyright (c) 2010-2013 NVIDIA Corporation
  * With help from the mpc8xxx SPI driver
  * With more help from omap3_spi SPI driver
  *
@@ -28,34 +28,80 @@
 #include <asm/gpio.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch/uart-spi-switch.h>
 #include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/tegra_spi.h>
+#include <asm/arch-tegra20/tegra20_sflash.h>
 #include <spi.h>
 #include <fdtdec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_SPI_CORRUPTS_UART)
- #define corrupt_delay()	udelay(CONFIG_SPI_CORRUPTS_UART_DLY);
-#else
- #define corrupt_delay()
-#endif
+#define SPI_CMD_GO			(1 << 30)
+#define SPI_CMD_ACTIVE_SCLK_SHIFT	26
+#define SPI_CMD_ACTIVE_SCLK_MASK	(3 << SPI_CMD_ACTIVE_SCLK_SHIFT)
+#define SPI_CMD_CK_SDA			(1 << 21)
+#define SPI_CMD_ACTIVE_SDA_SHIFT	18
+#define SPI_CMD_ACTIVE_SDA_MASK		(3 << SPI_CMD_ACTIVE_SDA_SHIFT)
+#define SPI_CMD_CS_POL			(1 << 16)
+#define SPI_CMD_TXEN			(1 << 15)
+#define SPI_CMD_RXEN			(1 << 14)
+#define SPI_CMD_CS_VAL			(1 << 13)
+#define SPI_CMD_CS_SOFT			(1 << 12)
+#define SPI_CMD_CS_DELAY		(1 << 9)
+#define SPI_CMD_CS3_EN			(1 << 8)
+#define SPI_CMD_CS2_EN			(1 << 7)
+#define SPI_CMD_CS1_EN			(1 << 6)
+#define SPI_CMD_CS0_EN			(1 << 5)
+#define SPI_CMD_BIT_LENGTH		(1 << 4)
+#define SPI_CMD_BIT_LENGTH_MASK		0x0000001F
+
+#define SPI_STAT_BSY			(1 << 31)
+#define SPI_STAT_RDY			(1 << 30)
+#define SPI_STAT_RXF_FLUSH		(1 << 29)
+#define SPI_STAT_TXF_FLUSH		(1 << 28)
+#define SPI_STAT_RXF_UNR		(1 << 27)
+#define SPI_STAT_TXF_OVF		(1 << 26)
+#define SPI_STAT_RXF_EMPTY		(1 << 25)
+#define SPI_STAT_RXF_FULL		(1 << 24)
+#define SPI_STAT_TXF_EMPTY		(1 << 23)
+#define SPI_STAT_TXF_FULL		(1 << 22)
+#define SPI_STAT_SEL_TXRX_N		(1 << 16)
+#define SPI_STAT_CUR_BLKCNT		(1 << 15)
+
+#define SPI_TIMEOUT		1000
+#define TEGRA_SPI_MAX_FREQ	52000000
+
+struct spi_regs {
+	u32 command;	/* SPI_COMMAND_0 register  */
+	u32 status;	/* SPI_STATUS_0 register */
+	u32 rx_cmp;	/* SPI_RX_CMP_0 register  */
+	u32 dma_ctl;	/* SPI_DMA_CTL_0 register */
+	u32 tx_fifo;	/* SPI_TX_FIFO_0 register */
+	u32 rsvd[3];	/* offsets 0x14 to 0x1F reserved */
+	u32 rx_fifo;	/* SPI_RX_FIFO_0 register */
+};
 
-struct tegra_spi_slave {
-	struct spi_slave slave;
-	struct spi_tegra *regs;
+struct tegra_spi_ctrl {
+	struct spi_regs *regs;
 	unsigned int freq;
 	unsigned int mode;
 	int periph_id;
+	int valid;
 };
 
+struct tegra_spi_slave {
+	struct spi_slave slave;
+	struct tegra_spi_ctrl *ctrl;
+};
+
+/* tegra20 only supports one SFLASH controller */
+static struct tegra_spi_ctrl spi_ctrls[1];
+
 static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave)
 {
 	return container_of(slave, struct tegra_spi_slave, slave);
 }
 
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+int tegra20_spi_cs_is_valid(unsigned int bus, unsigned int cs)
 {
 	/* Tegra20 SPI-Flash - only 1 device ('bus/cs') */
 	if (bus != 0 || cs != 0)
@@ -64,8 +110,8 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 		return 1;
 }
 
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-		unsigned int max_hz, unsigned int mode)
+struct spi_slave *tegra20_spi_setup_slave(unsigned int bus, unsigned int cs,
+				  unsigned int max_hz, unsigned int mode)
 {
 	struct tegra_spi_slave *spi;
 
@@ -86,86 +132,95 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 		printf("SPI error: malloc of SPI structure failed\n");
 		return NULL;
 	}
-#ifdef CONFIG_OF_CONTROL
-	int node = fdtdec_next_compatible(gd->fdt_blob, 0,
-					  COMPAT_NVIDIA_TEGRA20_SFLASH);
-	if (node < 0) {
-		debug("%s: cannot locate sflash node\n", __func__);
+	spi->slave.bus = bus;
+	spi->slave.cs = cs;
+	spi->ctrl = &spi_ctrls[bus];
+	if (!spi->ctrl) {
+		printf("SPI error: could not find controller for bus %d\n",
+		       bus);
 		return NULL;
 	}
-	if (!fdtdec_get_is_enabled(gd->fdt_blob, node)) {
-		debug("%s: sflash is disabled\n", __func__);
-		return NULL;
-	}
-	spi->regs = (struct spi_tegra *)fdtdec_get_addr(gd->fdt_blob,
-							node, "reg");
-	if ((fdt_addr_t)spi->regs == FDT_ADDR_T_NONE) {
-		debug("%s: no sflash register found\n", __func__);
-		return NULL;
-	}
-	spi->freq = fdtdec_get_int(gd->fdt_blob, node, "spi-max-frequency", 0);
-	if (!spi->freq) {
-		debug("%s: no sflash max frequency found\n", __func__);
-		return NULL;
-	}
-	spi->periph_id = clock_decode_periph_id(gd->fdt_blob, node);
-	if (spi->periph_id == PERIPH_ID_NONE) {
-		debug("%s: could not decode periph id\n", __func__);
-		return NULL;
-	}
-#else
-	spi->regs = (struct spi_tegra *)NV_PA_SPI_BASE;
-	spi->freq = TEGRA_SPI_MAX_FREQ;
-	spi->periph_id = PERIPH_ID_SPI1;
-#endif
-	if (max_hz < spi->freq) {
+
+	if (max_hz < spi->ctrl->freq) {
 		debug("%s: limiting frequency from %u to %u\n", __func__,
-		      spi->freq, max_hz);
-		spi->freq = max_hz;
+		      spi->ctrl->freq, max_hz);
+		spi->ctrl->freq = max_hz;
 	}
-	debug("%s: controller initialized at %p, freq = %u, periph_id = %d\n",
-	      __func__, spi->regs, spi->freq, spi->periph_id);
-	spi->mode = mode;
+	spi->ctrl->mode = mode;
 
 	return &spi->slave;
 }
 
-void spi_free_slave(struct spi_slave *slave)
+void tegra20_spi_free_slave(struct spi_slave *slave)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
 
 	free(spi);
 }
 
-void spi_init(void)
+int tegra20_spi_init(int *node_list, int count)
 {
-	/* do nothing */
+	struct tegra_spi_ctrl *ctrl;
+	int i;
+	int node = 0;
+	int found = 0;
+
+	for (i = 0; i < count; i++) {
+		ctrl = &spi_ctrls[i];
+		node = node_list[i];
+
+		ctrl->regs = (struct spi_regs *)fdtdec_get_addr(gd->fdt_blob,
+								node, "reg");
+		if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) {
+			debug("%s: no slink register found\n", __func__);
+			continue;
+		}
+		ctrl->freq = fdtdec_get_int(gd->fdt_blob, node,
+					    "spi-max-frequency", 0);
+		if (!ctrl->freq) {
+			debug("%s: no slink max frequency found\n", __func__);
+			continue;
+		}
+
+		ctrl->periph_id = clock_decode_periph_id(gd->fdt_blob, node);
+		if (ctrl->periph_id == PERIPH_ID_NONE) {
+			debug("%s: could not decode periph id\n", __func__);
+			continue;
+		}
+		ctrl->valid = 1;
+		found = 1;
+
+		debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
+		      __func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
+	}
+	return !found;
 }
 
-int spi_claim_bus(struct spi_slave *slave)
+int tegra20_spi_claim_bus(struct spi_slave *slave)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
-	struct spi_tegra *regs = spi->regs;
+	struct spi_regs *regs = spi->ctrl->regs;
 	u32 reg;
 
 	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
-	clock_start_periph_pll(spi->periph_id, CLOCK_ID_PERIPH, spi->freq);
+	clock_start_periph_pll(spi->ctrl->periph_id, CLOCK_ID_PERIPH,
+			       spi->ctrl->freq);
 
 	/* Clear stale status here */
 	reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \
 		SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF;
 	writel(reg, &regs->status);
-	debug("spi_init: STATUS = %08x\n", readl(&regs->status));
+	debug("%s: STATUS = %08x\n", __func__, readl(&regs->status));
 
 	/*
 	 * Use sw-controlled CS, so we can clock in data after ReadID, etc.
 	 */
-	reg = (spi->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT;
-	if (spi->mode & 2)
+	reg = (spi->ctrl->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT;
+	if (spi->ctrl->mode & 2)
 		reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT;
 	clrsetbits_le32(&regs->command, SPI_CMD_ACTIVE_SCLK_MASK |
 		SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg);
-	debug("spi_init: COMMAND = %08x\n", readl(&regs->command));
+	debug("%s: COMMAND = %08x\n", __func__, readl(&regs->command));
 
 	/*
 	 * SPI pins on Tegra20 are muxed - change pinmux later due to UART
@@ -173,58 +228,34 @@ int spi_claim_bus(struct spi_slave *slave)
 	 */
 	pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
 	pinmux_tristate_disable(PINGRP_LSPI);
+	pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
 
-#ifndef CONFIG_SPI_UART_SWITCH
-	/*
-	 * NOTE:
-	 * Only set PinMux bits 3:2 to SPI here on boards that don't have the
-	 * SPI UART switch or subsequent UART data won't go out!  See
-	 * spi_uart_switch().
-	 */
-	/* TODO: pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); */
-#endif
 	return 0;
 }
 
-void spi_release_bus(struct spi_slave *slave)
-{
-	/*
-	 * We can't release UART_DISABLE and set pinmux to UART4 here since
-	 * some code (e,g, spi_flash_probe) uses printf() while the SPI
-	 * bus is held. That is arguably bad, but it has the advantage of
-	 * already being in the source tree.
-	 */
-}
-
-void spi_cs_activate(struct spi_slave *slave)
+void tegra20_spi_cs_activate(struct spi_slave *slave)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
-
-	pinmux_select_spi();
+	struct spi_regs *regs = spi->ctrl->regs;
 
 	/* CS is negated on Tegra, so drive a 1 to get a 0 */
-	setbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
-
-	corrupt_delay();		/* Let UART settle */
+	setbits_le32(&regs->command, SPI_CMD_CS_VAL);
 }
 
-void spi_cs_deactivate(struct spi_slave *slave)
+void tegra20_spi_cs_deactivate(struct spi_slave *slave)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
-
-	pinmux_select_uart();
+	struct spi_regs *regs = spi->ctrl->regs;
 
 	/* CS is negated on Tegra, so drive a 0 to get a 1 */
-	clrbits_le32(&spi->regs->command, SPI_CMD_CS_VAL);
-
-	corrupt_delay();		/* Let SPI settle */
+	clrbits_le32(&regs->command, SPI_CMD_CS_VAL);
 }
 
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+int tegra20_spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 		const void *data_out, void *data_in, unsigned long flags)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
-	struct spi_tegra *regs = spi->regs;
+	struct spi_regs *regs = spi->ctrl->regs;
 	u32 reg, tmpdout, tmpdin = 0;
 	const u8 *dout = data_out;
 	u8 *din = data_in;
diff --git a/drivers/spi/tegra_slink.c b/drivers/spi/tegra20_slink.c
index 9da5877..664de6e 100644
--- a/drivers/spi/tegra_slink.c
+++ b/drivers/spi/tegra20_slink.c
@@ -27,14 +27,68 @@
 #include <asm/gpio.h>
 #include <asm/arch/clock.h>
 #include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/tegra_slink.h>
+#include <asm/arch-tegra20/tegra20_slink.h>
 #include <spi.h>
 #include <fdtdec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/* COMMAND */
+#define SLINK_CMD_ENB			(1 << 31)
+#define SLINK_CMD_GO			(1 << 30)
+#define SLINK_CMD_M_S			(1 << 28)
+#define SLINK_CMD_CK_SDA		(1 << 21)
+#define SLINK_CMD_CS_POL		(1 << 13)
+#define SLINK_CMD_CS_VAL		(1 << 12)
+#define SLINK_CMD_CS_SOFT		(1 << 11)
+#define SLINK_CMD_BIT_LENGTH		(1 << 4)
+#define SLINK_CMD_BIT_LENGTH_MASK	0x0000001F
+/* COMMAND2 */
+#define SLINK_CMD2_TXEN			(1 << 30)
+#define SLINK_CMD2_RXEN			(1 << 31)
+#define SLINK_CMD2_SS_EN		(1 << 18)
+#define SLINK_CMD2_SS_EN_SHIFT		18
+#define SLINK_CMD2_SS_EN_MASK		0x000C0000
+#define SLINK_CMD2_CS_ACTIVE_BETWEEN	(1 << 17)
+/* STATUS */
+#define SLINK_STAT_BSY			(1 << 31)
+#define SLINK_STAT_RDY			(1 << 30)
+#define SLINK_STAT_ERR			(1 << 29)
+#define SLINK_STAT_RXF_FLUSH		(1 << 27)
+#define SLINK_STAT_TXF_FLUSH		(1 << 26)
+#define SLINK_STAT_RXF_OVF		(1 << 25)
+#define SLINK_STAT_TXF_UNR		(1 << 24)
+#define SLINK_STAT_RXF_EMPTY		(1 << 23)
+#define SLINK_STAT_RXF_FULL		(1 << 22)
+#define SLINK_STAT_TXF_EMPTY		(1 << 21)
+#define SLINK_STAT_TXF_FULL		(1 << 20)
+#define SLINK_STAT_TXF_OVF		(1 << 19)
+#define SLINK_STAT_RXF_UNR		(1 << 18)
+#define SLINK_STAT_CUR_BLKCNT		(1 << 15)
+/* STATUS2 */
+#define SLINK_STAT2_RXF_FULL_CNT	(1 << 16)
+#define SLINK_STAT2_TXF_FULL_CNT	(1 << 0)
+
+#define SPI_TIMEOUT		1000
+#define TEGRA_SPI_MAX_FREQ	52000000
+
+struct spi_regs {
+	u32 command;	/* SLINK_COMMAND_0 register  */
+	u32 command2;	/* SLINK_COMMAND2_0 reg */
+	u32 status;	/* SLINK_STATUS_0 register */
+	u32 reserved;	/* Reserved offset 0C */
+	u32 mas_data;	/* SLINK_MAS_DATA_0 reg */
+	u32 slav_data;	/* SLINK_SLAVE_DATA_0 reg */
+	u32 dma_ctl;	/* SLINK_DMA_CTL_0 register */
+	u32 status2;	/* SLINK_STATUS2_0 reg */
+	u32 rsvd[56];	/* 0x20 to 0xFF reserved */
+	u32 tx_fifo;	/* SLINK_TX_FIFO_0 reg off 100h */
+	u32 rsvd2[31];	/* 0x104 to 0x17F reserved */
+	u32 rx_fifo;	/* SLINK_RX_FIFO_0 reg off 180h */
+};
+
 struct tegra_spi_ctrl {
-	struct slink_tegra *regs;
+	struct spi_regs *regs;
 	unsigned int freq;
 	unsigned int mode;
 	int periph_id;
@@ -53,7 +107,7 @@ static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave)
 	return container_of(slave, struct tegra_spi_slave, slave);
 }
 
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+int tegra30_spi_cs_is_valid(unsigned int bus, unsigned int cs)
 {
 	if (bus >= CONFIG_TEGRA_SLINK_CTRLS || cs > 3 || !spi_ctrls[bus].valid)
 		return 0;
@@ -61,7 +115,7 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 		return 1;
 }
 
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+struct spi_slave *tegra30_spi_setup_slave(unsigned int bus, unsigned int cs,
 		unsigned int max_hz, unsigned int mode)
 {
 	struct tegra_spi_slave *spi;
@@ -103,32 +157,26 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 	return &spi->slave;
 }
 
-void spi_free_slave(struct spi_slave *slave)
+void tegra30_spi_free_slave(struct spi_slave *slave)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
 
 	free(spi);
 }
 
-void spi_init(void)
+int tegra30_spi_init(int *node_list, int count)
 {
 	struct tegra_spi_ctrl *ctrl;
 	int i;
-#ifdef CONFIG_OF_CONTROL
 	int node = 0;
-	int count;
-	int node_list[CONFIG_TEGRA_SLINK_CTRLS];
+	int found = 0;
 
-	count = fdtdec_find_aliases_for_id(gd->fdt_blob, "spi",
-					   COMPAT_NVIDIA_TEGRA20_SLINK,
-					   node_list,
-					   CONFIG_TEGRA_SLINK_CTRLS);
 	for (i = 0; i < count; i++) {
 		ctrl = &spi_ctrls[i];
 		node = node_list[i];
 
-		ctrl->regs = (struct slink_tegra *)fdtdec_get_addr(gd->fdt_blob,
-								   node, "reg");
+		ctrl->regs = (struct spi_regs *)fdtdec_get_addr(gd->fdt_blob,
+								node, "reg");
 		if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) {
 			debug("%s: no slink register found\n", __func__);
 			continue;
@@ -146,44 +194,18 @@ void spi_init(void)
 			continue;
 		}
 		ctrl->valid = 1;
+		found = 1;
 
 		debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
 		      __func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
 	}
-#else
-	for (i = 0; i < CONFIG_TEGRA_SLINK_CTRLS; i++) {
-		ctrl = &spi_ctrls[i];
-		u32 base_regs[] = {
-			NV_PA_SLINK1_BASE,
-			NV_PA_SLINK2_BASE,
-			NV_PA_SLINK3_BASE,
-			NV_PA_SLINK4_BASE,
-			NV_PA_SLINK5_BASE,
-			NV_PA_SLINK6_BASE,
-		};
-		int periph_ids[] = {
-			PERIPH_ID_SBC1,
-			PERIPH_ID_SBC2,
-			PERIPH_ID_SBC3,
-			PERIPH_ID_SBC4,
-			PERIPH_ID_SBC5,
-			PERIPH_ID_SBC6,
-		};
-		ctrl->regs = (struct slink_tegra *)base_regs[i];
-		ctrl->freq = TEGRA_SPI_MAX_FREQ;
-		ctrl->periph_id = periph_ids[i];
-		ctrl->valid = 1;
-
-		debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
-		      __func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
-	}
-#endif
+	return !found;
 }
 
-int spi_claim_bus(struct spi_slave *slave)
+int tegra30_spi_claim_bus(struct spi_slave *slave)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
-	struct slink_tegra *regs = spi->ctrl->regs;
+	struct spi_regs *regs = spi->ctrl->regs;
 	u32 reg;
 
 	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
@@ -205,33 +227,29 @@ int spi_claim_bus(struct spi_slave *slave)
 	return 0;
 }
 
-void spi_release_bus(struct spi_slave *slave)
-{
-}
-
-void spi_cs_activate(struct spi_slave *slave)
+void tegra30_spi_cs_activate(struct spi_slave *slave)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
-	struct slink_tegra *regs = spi->ctrl->regs;
+	struct spi_regs *regs = spi->ctrl->regs;
 
 	/* CS is negated on Tegra, so drive a 1 to get a 0 */
 	setbits_le32(&regs->command, SLINK_CMD_CS_VAL);
 }
 
-void spi_cs_deactivate(struct spi_slave *slave)
+void tegra30_spi_cs_deactivate(struct spi_slave *slave)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
-	struct slink_tegra *regs = spi->ctrl->regs;
+	struct spi_regs *regs = spi->ctrl->regs;
 
 	/* CS is negated on Tegra, so drive a 0 to get a 1 */
 	clrbits_le32(&regs->command, SLINK_CMD_CS_VAL);
 }
 
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+int tegra30_spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 		const void *data_out, void *data_in, unsigned long flags)
 {
 	struct tegra_spi_slave *spi = to_tegra_spi(slave);
-	struct slink_tegra *regs = spi->ctrl->regs;
+	struct spi_regs *regs = spi->ctrl->regs;
 	u32 reg, tmpdout, tmpdin = 0;
 	const u8 *dout = data_out;
 	u8 *din = data_in;
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 170a358..e8cecca 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -40,6 +40,7 @@ COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
 COBJS-$(CONFIG_LD9040) += ld9040.o
 COBJS-$(CONFIG_SED156X) += sed156x.o
 COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
+COBJS-$(CONFIG_VIDEO_BCM2835) += bcm2835.o
 COBJS-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o
 COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
 COBJS-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c
new file mode 100644
index 0000000..1e9a84a
--- /dev/null
+++ b/drivers/video/bcm2835.c
@@ -0,0 +1,127 @@
+/*
+ * (C) Copyright 2012 Stephen Warren
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <lcd.h>
+#include <asm/arch/mbox.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Global variables that lcd.c expects to exist */
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+void *lcd_base;
+void *lcd_console_address;
+short console_col;
+short console_row;
+vidinfo_t panel_info;
+char lcd_cursor_enabled;
+ushort lcd_cursor_width;
+ushort lcd_cursor_height;
+
+struct msg_query {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
+	u32 end_tag;
+};
+
+struct msg_setup {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
+	struct bcm2835_mbox_tag_virtual_w_h virtual_w_h;
+	struct bcm2835_mbox_tag_depth depth;
+	struct bcm2835_mbox_tag_pixel_order pixel_order;
+	struct bcm2835_mbox_tag_alpha_mode alpha_mode;
+	struct bcm2835_mbox_tag_virtual_offset virtual_offset;
+	struct bcm2835_mbox_tag_overscan overscan;
+	struct bcm2835_mbox_tag_allocate_buffer allocate_buffer;
+	u32 end_tag;
+};
+
+void lcd_ctrl_init(void *lcdbase)
+{
+	ALLOC_ALIGN_BUFFER(struct msg_query, msg_query, 1, 16);
+	ALLOC_ALIGN_BUFFER(struct msg_setup, msg_setup, 1, 16);
+	int ret;
+	u32 w, h;
+
+	debug("bcm2835: Query resolution...\n");
+
+	BCM2835_MBOX_INIT_HDR(msg_query);
+	BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_query->physical_w_h,
+					GET_PHYSICAL_W_H);
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_query->hdr);
+	if (ret) {
+		printf("bcm2835: Could not query display resolution\n");
+		/* FIXME: How to disable the LCD to prevent errors? hang()? */
+		return;
+	}
+
+	w = msg_query->physical_w_h.body.resp.width;
+	h = msg_query->physical_w_h.body.resp.height;
+
+	debug("bcm2835: Setting up display for %d x %d\n", w, h);
+
+	BCM2835_MBOX_INIT_HDR(msg_setup);
+	BCM2835_MBOX_INIT_TAG(&msg_setup->physical_w_h, SET_PHYSICAL_W_H);
+	msg_setup->physical_w_h.body.req.width = w;
+	msg_setup->physical_w_h.body.req.height = h;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_w_h, SET_VIRTUAL_W_H);
+	msg_setup->virtual_w_h.body.req.width = w;
+	msg_setup->virtual_w_h.body.req.height = h;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->depth, SET_DEPTH);
+	msg_setup->depth.body.req.bpp = 16;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->pixel_order, SET_PIXEL_ORDER);
+	msg_setup->pixel_order.body.req.order = BCM2835_MBOX_PIXEL_ORDER_BGR;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->alpha_mode, SET_ALPHA_MODE);
+	msg_setup->alpha_mode.body.req.alpha = BCM2835_MBOX_ALPHA_MODE_IGNORED;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_offset, SET_VIRTUAL_OFFSET);
+	msg_setup->virtual_offset.body.req.x = 0;
+	msg_setup->virtual_offset.body.req.y = 0;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->overscan, SET_OVERSCAN);
+	msg_setup->overscan.body.req.top = 0;
+	msg_setup->overscan.body.req.bottom = 0;
+	msg_setup->overscan.body.req.left = 0;
+	msg_setup->overscan.body.req.right = 0;
+	BCM2835_MBOX_INIT_TAG(&msg_setup->allocate_buffer, ALLOCATE_BUFFER);
+	msg_setup->allocate_buffer.body.req.alignment = 0x100;
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_setup->hdr);
+	if (ret) {
+		printf("bcm2835: Could not configure display\n");
+		/* FIXME: How to disable the LCD to prevent errors? hang()? */
+		return;
+	}
+
+	w = msg_setup->physical_w_h.body.resp.width;
+	h = msg_setup->physical_w_h.body.resp.height;
+
+	debug("bcm2835: Final resolution is %d x %d\n", w, h);
+
+	panel_info.vl_col = w;
+	panel_info.vl_row = h;
+	panel_info.vl_bpix = LCD_COLOR16;
+
+	gd->fb_base = msg_setup->allocate_buffer.body.resp.fb_address;
+	lcd_base = (void *)gd->fb_base;
+}
+
+void lcd_enable(void)
+{
+}