summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorGuennadi Liakhovetski <lg@denx.de>2007-11-20 13:14:20 +0100
committerWolfgang Denk <wd@denx.de>2008-01-09 14:37:01 +0100
commit6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214 (patch)
tree129fbc965fc801b96e4ad7043bb022a1c5fed08c /drivers
parent07eb02687f008721974a2fb54cd7fdc28033ab3c (diff)
downloadu-boot-imx-6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214.zip
u-boot-imx-6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214.tar.gz
u-boot-imx-6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214.tar.bz2
Fix endianness conversions in rtl8169 driver
It is unclear on what platforms this driver has been tested, since noone up to now defines CONFIG_RTL8169 in the board configuration header. Now it has been fixed for a big-endian mpc8241 based linkstation platform. This patch presents the necessary endianness conversion fixes. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/rtl8169.c100
1 files changed, 45 insertions, 55 deletions
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 63ea2cc..1d7f31c 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -48,7 +48,10 @@
*
* Indent Options: indent -kr -i8
***************************************************************************/
-
+/*
+ * 26 August 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
+ * Modified to use le32_to_cpu and cpu_to_le32 properly
+ */
#include <common.h>
#include <malloc.h>
#include <net.h>
@@ -68,12 +71,7 @@
static u32 ioaddr;
/* Condensed operations for readability. */
-#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
-#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
-
#define currticks() get_timer(0)
-#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
-#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
/* media options */
#define MAX_UNITS 8
@@ -102,7 +100,7 @@ static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
#define RTL_MIN_IO_SIZE 0x80
#define TX_TIMEOUT (6*HZ)
-/* write/read MMIO register */
+/* write/read MMIO register. Notice: {read,write}[wl] do the necessary swapping */
#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg))
#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg))
@@ -218,7 +216,7 @@ enum RTL8169_register_content {
PHY_Enable_Auto_Nego = 0x1000,
/* PHY_STAT_REG = 1; */
- PHY_Auto_Neco_Comp = 0x0020,
+ PHY_Auto_Nego_Comp = 0x0020,
/* PHY_AUTO_NEGO_REG = 4; */
PHY_Cap_10_Half = 0x0020,
@@ -413,23 +411,23 @@ static int rtl_recv(struct eth_device *dev)
ioaddr = dev->iobase;
cur_rx = tpc->cur_rx;
- if ((tpc->RxDescArray[cur_rx].status & OWNbit) == 0) {
- if (!(tpc->RxDescArray[cur_rx].status & RxRES)) {
+ if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) {
+ if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) {
unsigned char rxdata[RX_BUF_LEN];
- length = (int) (tpc->RxDescArray[cur_rx].
- status & 0x00001FFF) - 4;
+ length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx].
+ status) & 0x00001FFF) - 4;
memcpy(rxdata, tpc->RxBufferRing[cur_rx], length);
NetReceive(rxdata, length);
if (cur_rx == NUM_RX_DESC - 1)
tpc->RxDescArray[cur_rx].status =
- (OWNbit | EORbit) + RX_BUF_SIZE;
+ cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
else
tpc->RxDescArray[cur_rx].status =
- OWNbit + RX_BUF_SIZE;
+ cpu_to_le32(OWNbit + RX_BUF_SIZE);
tpc->RxDescArray[cur_rx].buf_addr =
- virt_to_bus(tpc->RxBufferRing[cur_rx]);
+ cpu_to_le32(tpc->RxBufferRing[cur_rx]);
} else {
puts("Error Rx");
}
@@ -454,6 +452,7 @@ static int rtl_send(struct eth_device *dev, volatile void *packet, int length)
u8 *ptxb;
int entry = tpc->cur_tx % NUM_TX_DESC;
u32 len = length;
+ int ret;
#ifdef DEBUG_RTL8169_TX
int stime = currticks();
@@ -470,34 +469,38 @@ static int rtl_send(struct eth_device *dev, volatile void *packet, int length)
while (len < ETH_ZLEN)
ptxb[len++] = '\0';
- tpc->TxDescArray[entry].buf_addr = virt_to_bus(ptxb);
+ tpc->TxDescArray[entry].buf_addr = cpu_to_le32(ptxb);
if (entry != (NUM_TX_DESC - 1)) {
tpc->TxDescArray[entry].status =
- (OWNbit | FSbit | LSbit) | ((len > ETH_ZLEN) ?
- len : ETH_ZLEN);
+ cpu_to_le32((OWNbit | FSbit | LSbit) |
+ ((len > ETH_ZLEN) ? len : ETH_ZLEN));
} else {
tpc->TxDescArray[entry].status =
- (OWNbit | EORbit | FSbit | LSbit) |
- ((len > ETH_ZLEN) ? length : ETH_ZLEN);
+ cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) |
+ ((len > ETH_ZLEN) ? len : ETH_ZLEN));
}
RTL_W8(TxPoll, 0x40); /* set polling bit */
tpc->cur_tx++;
to = currticks() + TX_TIMEOUT;
- while ((tpc->TxDescArray[entry].status & OWNbit) && (currticks() < to)); /* wait */
+ while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit)
+ && (currticks() < to)); /* wait */
if (currticks() >= to) {
#ifdef DEBUG_RTL8169_TX
puts ("tx timeout/error\n");
printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
#endif
- return 0;
+ ret = 0;
} else {
#ifdef DEBUG_RTL8169_TX
puts("tx done\n");
#endif
- return length;
+ ret = length;
}
+ /* Delay to make net console (nc) work properly */
+ udelay(20);
+ return ret;
}
static void rtl8169_set_rx_mode(struct eth_device *dev)
@@ -564,8 +567,8 @@ static void rtl8169_hw_start(struct eth_device *dev)
tpc->cur_rx = 0;
- RTL_W32(TxDescStartAddr, virt_to_le32desc(tpc->TxDescArray));
- RTL_W32(RxDescStartAddr, virt_to_le32desc(tpc->RxDescArray));
+ RTL_W32(TxDescStartAddr, tpc->TxDescArray);
+ RTL_W32(RxDescStartAddr, tpc->RxDescArray);
RTL_W8(Cfg9346, Cfg9346_Lock);
udelay(10);
@@ -603,13 +606,14 @@ static void rtl8169_init_ring(struct eth_device *dev)
for (i = 0; i < NUM_RX_DESC; i++) {
if (i == (NUM_RX_DESC - 1))
tpc->RxDescArray[i].status =
- (OWNbit | EORbit) + RX_BUF_SIZE;
+ cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
else
- tpc->RxDescArray[i].status = OWNbit + RX_BUF_SIZE;
+ tpc->RxDescArray[i].status =
+ cpu_to_le32(OWNbit + RX_BUF_SIZE);
tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
tpc->RxDescArray[i].buf_addr =
- virt_to_bus(tpc->RxBufferRing[i]);
+ cpu_to_le32(tpc->RxBufferRing[i]);
}
#ifdef DEBUG_RTL8169
@@ -623,8 +627,6 @@ RESET - Finish setting up the ethernet interface
static void rtl_reset(struct eth_device *dev, bd_t *bis)
{
int i;
- u8 diff;
- u32 TxPhyAddr, RxPhyAddr;
#ifdef DEBUG_RTL8169
int stime = currticks();
@@ -632,25 +634,14 @@ static void rtl_reset(struct eth_device *dev, bd_t *bis)
#endif
tpc->TxDescArrays = tx_ring;
- if (tpc->TxDescArrays == 0)
- puts("Allot Error");
/* Tx Desscriptor needs 256 bytes alignment; */
- TxPhyAddr = virt_to_bus(tpc->TxDescArrays);
- diff = 256 - (TxPhyAddr - ((TxPhyAddr >> 8) << 8));
- TxPhyAddr += diff;
- tpc->TxDescArray = (struct TxDesc *) (tpc->TxDescArrays + diff);
+ tpc->TxDescArray = (struct TxDesc *) ((unsigned long)(tpc->TxDescArrays +
+ 255) & ~255);
tpc->RxDescArrays = rx_ring;
/* Rx Desscriptor needs 256 bytes alignment; */
- RxPhyAddr = virt_to_bus(tpc->RxDescArrays);
- diff = 256 - (RxPhyAddr - ((RxPhyAddr >> 8) << 8));
- RxPhyAddr += diff;
- tpc->RxDescArray = (struct RxDesc *) (tpc->RxDescArrays + diff);
-
- if (tpc->TxDescArrays == NULL || tpc->RxDescArrays == NULL) {
- puts("Allocate RxDescArray or TxDescArray failed\n");
- return;
- }
+ tpc->RxDescArray = (struct RxDesc *) ((unsigned long)(tpc->RxDescArrays +
+ 255) & ~255);
rtl8169_init_ring(dev);
rtl8169_hw_start(dev);
@@ -733,7 +724,7 @@ static int rtl_init(struct eth_device *dev, bd_t *bis)
/* Get MAC address. FIXME: read EEPROM */
for (i = 0; i < MAC_ADDR_LEN; i++)
- dev->enetaddr[i] = RTL_R8(MAC0 + i);
+ bis->bi_enetaddr[i] = dev->enetaddr[i] = RTL_R8(MAC0 + i);
#ifdef DEBUG_RTL8169
printf("MAC Address");
@@ -808,7 +799,7 @@ static int rtl_init(struct eth_device *dev, bd_t *bis)
/* wait for auto-negotiation process */
for (i = 10000; i > 0; i--) {
/* check if auto-negotiation complete */
- if (mdio_read(PHY_STAT_REG) & PHY_Auto_Neco_Comp) {
+ if (mdio_read(PHY_STAT_REG) & PHY_Auto_Nego_Comp) {
udelay(100);
option = RTL_R8(PHYstatus);
if (option & _1000bpsF) {
@@ -818,13 +809,12 @@ static int rtl_init(struct eth_device *dev, bd_t *bis)
#endif
} else {
#ifdef DEBUG_RTL8169
- printf
- ("%s: %sMbps %s-duplex operation.\n",
- dev->name,
- (option & _100bps) ? "100" :
- "10",
- (option & FullDup) ? "Full" :
- "Half");
+ printf("%s: %sMbps %s-duplex operation.\n",
+ dev->name,
+ (option & _100bps) ? "100" :
+ "10",
+ (option & FullDup) ? "Full" :
+ "Half");
#endif
}
break;
@@ -869,7 +859,7 @@ int rtl8169_initialize(bd_t *bis)
sprintf (dev->name, "RTL8169#%d", card_number);
dev->priv = (void *) devno;
- dev->iobase = (int)bus_to_phys(iobase);
+ dev->iobase = (int)pci_mem_to_phys(devno, iobase);
dev->init = rtl_reset;
dev->halt = rtl_halt;