summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorHeiko Schocher <hs@denx.de>2013-10-22 11:03:18 +0200
committerHeiko Schocher <hs@denx.de>2013-11-13 06:18:17 +0100
commit6789e84ecaa8f45d053084e08c381284a04abff7 (patch)
treec4ad9d9cab924058bd66a7af160f8e526bfb7231 /drivers
parent124913556c4b99909f40b4bf4ceaefe2b555d6f8 (diff)
downloadu-boot-imx-6789e84ecaa8f45d053084e08c381284a04abff7.zip
u-boot-imx-6789e84ecaa8f45d053084e08c381284a04abff7.tar.gz
u-boot-imx-6789e84ecaa8f45d053084e08c381284a04abff7.tar.bz2
i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
- add omap24xx driver to new multibus/multiadpater support - adapted all config files, which uses this driver Tested on the am335x based siemens boards rut, dxr2 and pxm2 posted here: http://patchwork.ozlabs.org/patch/263211/ Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Tom Rini <trini@ti.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Thomas Weber <weber@corscience.de> Cc: Tom Rix <Tom.Rix@windriver.com> Cc: Grazvydas Ignotas <notasas@gmail.com> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Cc: Luca Ceresoli <luca.ceresoli@comelit.it> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Ilya Yanok <yanok@emcraft.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Nishanth Menon <nm@ti.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Peter Barada <peter.barada@logicpd.com> Cc: Nagendra T S <nagendra@mistralsolutions.com> Cc: Michael Jones <michael.jones@matrix-vision.de> Cc: Raphael Assenat <raph@8d.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/Makefile4
-rw-r--r--drivers/i2c/omap24xx_i2c.c172
2 files changed, 110 insertions, 66 deletions
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 0899b6e..298b17b 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -12,8 +12,6 @@ obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
obj-$(CONFIG_I2C_MV) += mv_i2c.o
obj-$(CONFIG_I2C_MXS) += mxs_i2c.o
obj-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
-obj-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
-obj-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
obj-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
@@ -23,6 +21,8 @@ obj-$(CONFIG_SYS_I2C) += i2c_core.o
obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
obj-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
+obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
+obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index ef38d71..3d38c03 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -35,6 +35,7 @@
*/
#include <common.h>
+#include <i2c.h>
#include <asm/arch/i2c.h>
#include <asm/io.h>
@@ -48,22 +49,14 @@ DECLARE_GLOBAL_DATA_PTR;
/* Absolutely safe for status update at 100 kHz I2C: */
#define I2C_WAIT 200
-static int wait_for_bb(void);
-static u16 wait_for_event(void);
-static void flush_fifo(void);
+static int wait_for_bb(struct i2c_adapter *adap);
+static struct i2c *omap24_get_base(struct i2c_adapter *adap);
+static u16 wait_for_event(struct i2c_adapter *adap);
+static void flush_fifo(struct i2c_adapter *adap);
-/*
- * For SPL boot some boards need i2c before SDRAM is initialised so force
- * variables to live in SRAM
- */
-static struct i2c __attribute__((section (".data"))) *i2c_base =
- (struct i2c *)I2C_DEFAULT_BASE;
-static unsigned int __attribute__((section (".data"))) bus_initialized[I2C_BUS_MAX] =
- { [0 ... (I2C_BUS_MAX-1)] = 0 };
-static unsigned int __attribute__((section (".data"))) current_bus = 0;
-
-void i2c_init(int speed, int slaveadd)
+static void omap24_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int psc, fsscll, fssclh;
int hsscll = 0, hssclh = 0;
u32 scll, sclh;
@@ -163,16 +156,15 @@ void i2c_init(int speed, int slaveadd)
I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
#endif
udelay(1000);
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
-
- if (gd->flags & GD_FLG_RELOC)
- bus_initialized[current_bus] = 1;
}
-static void flush_fifo(void)
-{ u16 stat;
+static void flush_fifo(struct i2c_adapter *adap)
+{
+ struct i2c *i2c_base = omap24_get_base(adap);
+ u16 stat;
/* note: if you try and read data when its not there or ready
* you get a bus error
@@ -192,8 +184,9 @@ static void flush_fifo(void)
* i2c_probe: Use write access. Allows to identify addresses that are
* write-only (like the config register of dual-port EEPROMs)
*/
-int i2c_probe(uchar chip)
+static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
u16 status;
int res = 1; /* default = fail */
@@ -201,7 +194,7 @@ int i2c_probe(uchar chip)
return res;
/* Wait until bus is free */
- if (wait_for_bb())
+ if (wait_for_bb(adap))
return res;
/* No data transfer, slave addr only */
@@ -212,7 +205,7 @@ int i2c_probe(uchar chip)
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
I2C_CON_STP, &i2c_base->con);
- status = wait_for_event();
+ status = wait_for_event(adap);
if ((status & ~I2C_STAT_XRDY) == 0 || (status & I2C_STAT_AL)) {
/*
@@ -223,7 +216,7 @@ int i2c_probe(uchar chip)
*/
if (status == I2C_STAT_XRDY)
printf("i2c_probe: pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto pr_exit;
}
@@ -239,7 +232,7 @@ int i2c_probe(uchar chip)
I2C_CON_STP, &i2c_base->con); /* STP */
}
pr_exit:
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
return res;
@@ -258,8 +251,10 @@ pr_exit:
* or that do not need a register address at all (such as some clock
* distributors).
*/
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int i2c_error = 0;
u16 status;
@@ -287,7 +282,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
/* Wait until bus not busy */
- if (wait_for_bb())
+ if (wait_for_bb(adap))
return 1;
/* Zero, one or two bytes reg address (offset) */
@@ -308,12 +303,12 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
#endif
/* Send register offset */
while (1) {
- status = wait_for_event();
+ status = wait_for_event(adap);
/* Try to identify bus that is not padconf'd for I2C */
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
printf("i2c_read (addr phase): pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto rd_exit;
}
if (status == 0 || status & I2C_STAT_NACK) {
@@ -348,7 +343,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
/* Receive data */
while (1) {
- status = wait_for_event();
+ status = wait_for_event(adap);
/*
* Try to identify bus that is not padconf'd for I2C. This
* state could be left over from previous transactions if
@@ -357,7 +352,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
printf("i2c_read (data phase): pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto rd_exit;
}
if (status == 0 || status & I2C_STAT_NACK) {
@@ -375,15 +370,17 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
rd_exit:
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
return i2c_error;
}
/* i2c_write: Address (reg offset) may be 0, 1 or 2 bytes long. */
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+ int alen, uchar *buffer, int len)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int i;
u16 status;
int i2c_error = 0;
@@ -415,7 +412,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
/* Wait until bus not busy */
- if (wait_for_bb())
+ if (wait_for_bb(adap))
return 1;
/* Start address phase - will write regoffset + len bytes data */
@@ -428,12 +425,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
while (alen) {
/* Must write reg offset (one or two bytes) */
- status = wait_for_event();
+ status = wait_for_event(adap);
/* Try to identify bus that is not padconf'd for I2C */
if (status == I2C_STAT_XRDY) {
i2c_error = 2;
printf("i2c_write: pads on bus %d probably not configured (status=0x%x)\n",
- current_bus, status);
+ adap->hwadapnr, status);
goto wr_exit;
}
if (status == 0 || status & I2C_STAT_NACK) {
@@ -455,7 +452,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
/* Address phase is over, now write data */
for (i = 0; i < len; i++) {
- status = wait_for_event();
+ status = wait_for_event(adap);
if (status == 0 || status & I2C_STAT_NACK) {
i2c_error = 1;
printf("i2c_write: error waiting for data ACK (status=0x%x)\n",
@@ -474,7 +471,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
wr_exit:
- flush_fifo();
+ flush_fifo(adap);
writew(0xFFFF, &i2c_base->stat);
writew(0, &i2c_base->cnt);
return i2c_error;
@@ -484,8 +481,9 @@ wr_exit:
* Wait for the bus to be free by checking the Bus Busy (BB)
* bit to become clear
*/
-static int wait_for_bb(void)
+static int wait_for_bb(struct i2c_adapter *adap)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
int timeout = I2C_TIMEOUT;
u16 stat;
@@ -514,8 +512,9 @@ static int wait_for_bb(void)
* Wait for the I2C controller to complete current action
* and update status
*/
-static u16 wait_for_event(void)
+static u16 wait_for_event(struct i2c_adapter *adap)
{
+ struct i2c *i2c_base = omap24_get_base(adap);
u16 status;
int timeout = I2C_TIMEOUT;
@@ -540,7 +539,7 @@ static u16 wait_for_event(void)
* not been configured for I2C, and/or pull-ups are missing.
*/
printf("Check if pads/pull-ups of bus %d are properly configured\n",
- current_bus);
+ adap->hwadapnr);
writew(0xFFFF, &i2c_base->stat);
status = 0;
}
@@ -548,48 +547,93 @@ static u16 wait_for_event(void)
return status;
}
-int i2c_set_bus_num(unsigned int bus)
+static struct i2c *omap24_get_base(struct i2c_adapter *adap)
{
- if (bus >= I2C_BUS_MAX) {
- printf("Bad bus: %x\n", bus);
- return -1;
- }
-
- switch (bus) {
- default:
- bus = 0; /* Fall through */
+ switch (adap->hwadapnr) {
case 0:
- i2c_base = (struct i2c *)I2C_BASE1;
+ return (struct i2c *)I2C_BASE1;
break;
case 1:
- i2c_base = (struct i2c *)I2C_BASE2;
+ return (struct i2c *)I2C_BASE2;
break;
#if (I2C_BUS_MAX > 2)
case 2:
- i2c_base = (struct i2c *)I2C_BASE3;
+ return (struct i2c *)I2C_BASE3;
break;
#if (I2C_BUS_MAX > 3)
case 3:
- i2c_base = (struct i2c *)I2C_BASE4;
+ return (struct i2c *)I2C_BASE4;
break;
#if (I2C_BUS_MAX > 4)
case 4:
- i2c_base = (struct i2c *)I2C_BASE5;
+ return (struct i2c *)I2C_BASE5;
break;
#endif
#endif
#endif
+ default:
+ printf("wrong hwadapnr: %d\n", adap->hwadapnr);
+ break;
}
+ return NULL;
+}
- current_bus = bus;
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED1)
+#define CONFIG_SYS_OMAP24_I2C_SPEED1 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE1)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE1 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
- if (!bus_initialized[current_bus])
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+U_BOOT_I2C_ADAP_COMPLETE(omap24_0, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED,
+ CONFIG_SYS_OMAP24_I2C_SLAVE,
+ 0)
+U_BOOT_I2C_ADAP_COMPLETE(omap24_1, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED1,
+ CONFIG_SYS_OMAP24_I2C_SLAVE1,
+ 1)
+#if (I2C_BUS_MAX > 2)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED2)
+#define CONFIG_SYS_OMAP24_I2C_SPEED2 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE2)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE2 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
- return 0;
-}
+U_BOOT_I2C_ADAP_COMPLETE(omap24_2, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED2,
+ CONFIG_SYS_OMAP24_I2C_SLAVE2,
+ 2)
+#if (I2C_BUS_MAX > 3)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED3)
+#define CONFIG_SYS_OMAP24_I2C_SPEED3 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE3)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE3 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
-int i2c_get_bus_num(void)
-{
- return (int) current_bus;
-}
+U_BOOT_I2C_ADAP_COMPLETE(omap24_3, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED3,
+ CONFIG_SYS_OMAP24_I2C_SLAVE3,
+ 3)
+#if (I2C_BUS_MAX > 4)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED4)
+#define CONFIG_SYS_OMAP24_I2C_SPEED4 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE4)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE4 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
+
+U_BOOT_I2C_ADAP_COMPLETE(omap24_4, omap24_i2c_init, omap24_i2c_probe,
+ omap24_i2c_read, omap24_i2c_write, NULL,
+ CONFIG_SYS_OMAP24_I2C_SPEED4,
+ CONFIG_SYS_OMAP24_I2C_SLAVE4,
+ 4)
+#endif
+#endif
+#endif