Merge branch 'master' of http://git.denx.de/u-boot-sunxi

3 files changed, 162 insertions, 11 deletions

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 1936e5f..e86dd72 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -9,6 +9,7 @@ choice
 	depends on ARCH_SUNXI
 	default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 	default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
+	default AXP818_POWER if MACH_SUN8I_A83T
 	default SUNXI_NO_PMIC if MACH_SUN8I_H3
 
 config SUNXI_NO_PMIC
@@ -37,22 +38,32 @@ config AXP221_POWER
 	Select this to enable support for the axp221/axp223 pmic found on most
 	A23 and A31 boards.
 
+config AXP818_POWER
+	boolean "axp818 pmic support"
+	depends on MACH_SUN8I_A83T
+	---help---
+	Say y here to enable support for the axp818 pmic found on
+	A83T dev board.
+
 endchoice
 
 config AXP_DCDC1_VOLT
 	int "axp pmic dcdc1 voltage"
-	depends on AXP221_POWER
+	depends on AXP221_POWER || AXP818_POWER
+	default 3300 if AXP818_POWER
 	default 3000 if MACH_SUN6I || MACH_SUN8I
 	---help---
 	Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
 	disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for
 	generic 3.3V IO voltage for external devices like the lcd-panal and
 	sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to
-	safe battery. On A31 devices dcdc1 is also used for VCC-IO.
+	safe battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
+	dcdc1 is used for VCC-IO, nand, usb0, sd , etc.
 
 config AXP_DCDC2_VOLT
 	int "axp pmic dcdc2 voltage"
-	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER
+	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER
+	default 900 if AXP818_POWER
 	default 1400 if AXP152_POWER || AXP209_POWER
 	default 1200 if MACH_SUN6I
 	default 1100 if MACH_SUN8I
@@ -62,10 +73,12 @@ config AXP_DCDC2_VOLT
 	On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
 	On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
 	On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
+	On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
 
 config AXP_DCDC3_VOLT
 	int "axp pmic dcdc3 voltage"
-	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER
+	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER
+	default 900 if AXP818_POWER
 	default 1500 if AXP152_POWER
 	default 1250 if AXP209_POWER
 	default 1200 if MACH_SUN6I || MACH_SUN8I
@@ -76,10 +89,11 @@ config AXP_DCDC3_VOLT
 	should be 1.25V.
 	On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
 	On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
+	On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
 
 config AXP_DCDC4_VOLT
 	int "axp pmic dcdc4 voltage"
-	depends on AXP152_POWER || AXP221_POWER
+	depends on AXP152_POWER || AXP221_POWER || AXP818_POWER
 	default 1250 if AXP152_POWER
 	default 1200 if MACH_SUN6I
 	default 0 if MACH_SUN8I
@@ -89,15 +103,18 @@ config AXP_DCDC4_VOLT
 	On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
 	On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
 	On A23 / A33 boards dcdc4 is unused and should be disabled.
+	On A83T boards dcdc4 is used for VDD-GPU.
 
 config AXP_DCDC5_VOLT
 	int "axp pmic dcdc5 voltage"
-	depends on AXP221_POWER
+	depends on AXP221_POWER || AXP818_POWER
+	default 1800 if AXP818_POWER
 	default 1500 if MACH_SUN6I || MACH_SUN8I
 	---help---
 	Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
 	disable dcdc5.
-	On A23 / A31 / A33 boards dcdc5 is VCC-DRAM and should be 1.5V.
+	On A23 / A31 / A33 / A83T boards dcdc5 is VCC-DRAM and should be 1.5V,
+	1.8V for A83T.
 
 config AXP_ALDO1_VOLT
 	int "axp pmic (a)ldo1 voltage"
@@ -112,7 +129,7 @@ config AXP_ALDO1_VOLT
 
 config AXP_ALDO2_VOLT
 	int "axp pmic (a)ldo2 voltage"
-	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER
+	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP818_POWER
 	default 3000 if AXP152_POWER || AXP209_POWER
 	default 0 if MACH_SUN6I
 	default 2500 if MACH_SUN8I
@@ -126,14 +143,15 @@ config AXP_ALDO2_VOLT
 
 config AXP_ALDO3_VOLT
 	int "axp pmic (a)ldo3 voltage"
-	depends on AXP209_POWER || AXP221_POWER
-	default 0 if AXP209_POWER
+	depends on AXP209_POWER || AXP221_POWER || AXP818_POWER
+	default 0 if AXP209_POWER || AXP818_POWER
 	default 3000 if MACH_SUN6I || MACH_SUN8I
 	---help---
 	Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
 	disable aldo3.
 	On A10(s) / A13 / A20 boards aldo3 should be 2.8V.
 	On A23 / A31 / A33 boards aldo3 is VCC-PLL and AVCC and should be 3.0V.
+	On A83T aldo3 is used for LVDS, DSI, MIPI, HDMI, etc.
 
 config AXP_ALDO4_VOLT
 	int "axp pmic (a)ldo4 voltage"
@@ -172,7 +190,7 @@ config AXP_DLDO3_VOLT
 
 config AXP_DLDO4_VOLT
 	int "axp pmic dldo4 voltage"
-	depends on AXP221_POWER
+	depends on AXP221_POWER || AXP818_POWER
 	default 0
 	---help---
 	Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index a2d3c04..0fdbca3 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_AS3722_POWER)	+= as3722.o
 obj-$(CONFIG_AXP152_POWER)	+= axp152.o
 obj-$(CONFIG_AXP209_POWER)	+= axp209.o
 obj-$(CONFIG_AXP221_POWER)	+= axp221.o
+obj-$(CONFIG_AXP818_POWER)	+= axp818.o
 obj-$(CONFIG_EXYNOS_TMU)	+= exynos-tmu.o
 obj-$(CONFIG_FTPMU010_POWER)	+= ftpmu010.o
 obj-$(CONFIG_TPS6586X_POWER)	+= tps6586x.o
diff --git a/drivers/power/axp818.c b/drivers/power/axp818.c
new file mode 100644
index 0000000..4b21a83
--- /dev/null
+++ b/drivers/power/axp818.c
@@ -0,0 +1,132 @@
+/*
+ * AXP818 driver based on AXP221 driver
+ *
+ *
+ * (C) Copyright 2015 Vishnu Patekar <vishnuptekar0510@gmail.com>
+ *
+ * Based on axp221.c
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pmic_bus.h>
+#include <axp_pmic.h>
+
+static u8 axp818_mvolt_to_cfg(int mvolt, int min, int max, int div)
+{
+	if (mvolt < min)
+		mvolt = min;
+	else if (mvolt > max)
+		mvolt = max;
+
+	return  (mvolt - min) / div;
+}
+
+int axp_set_dcdc1(unsigned int mvolt)
+{
+	int ret;
+	u8 cfg = axp818_mvolt_to_cfg(mvolt, 1600, 3400, 100);
+
+	if (mvolt == 0)
+		return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
+					AXP818_OUTPUT_CTRL1_DCDC1_EN);
+
+	ret = pmic_bus_write(AXP818_DCDC1_CTRL, cfg);
+	if (ret)
+		return ret;
+
+	return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
+				AXP818_OUTPUT_CTRL1_DCDC1_EN);
+}
+
+int axp_set_dcdc2(unsigned int mvolt)
+{
+	int ret;
+	u8 cfg;
+
+	if (mvolt >= 1220)
+		cfg = 70 + axp818_mvolt_to_cfg(mvolt, 1220, 1300, 20);
+	else
+		cfg = axp818_mvolt_to_cfg(mvolt, 500, 1200, 10);
+
+	if (mvolt == 0)
+		return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
+					AXP818_OUTPUT_CTRL1_DCDC2_EN);
+
+	ret = pmic_bus_write(AXP818_DCDC2_CTRL, cfg);
+	if (ret)
+		return ret;
+
+	return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
+				AXP818_OUTPUT_CTRL1_DCDC2_EN);
+}
+
+int axp_set_dcdc3(unsigned int mvolt)
+{
+	int ret;
+	u8 cfg;
+
+	if (mvolt >= 1220)
+		cfg = 70 + axp818_mvolt_to_cfg(mvolt, 1220, 1300, 20);
+	else
+		cfg = axp818_mvolt_to_cfg(mvolt, 500, 1200, 10);
+
+	if (mvolt == 0)
+		return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
+					AXP818_OUTPUT_CTRL1_DCDC3_EN);
+
+	ret = pmic_bus_write(AXP818_DCDC3_CTRL, cfg);
+	if (ret)
+		return ret;
+
+	return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
+				AXP818_OUTPUT_CTRL1_DCDC3_EN);
+}
+
+int axp_set_dcdc5(unsigned int mvolt)
+{
+	int ret;
+	u8 cfg;
+
+	if (mvolt >= 1140)
+		cfg = 32 + axp818_mvolt_to_cfg(mvolt, 1140, 1840, 20);
+	else
+		cfg = axp818_mvolt_to_cfg(mvolt, 800, 1120, 10);
+
+	if (mvolt == 0)
+		return pmic_bus_clrbits(AXP818_OUTPUT_CTRL1,
+					AXP818_OUTPUT_CTRL1_DCDC5_EN);
+
+	ret = pmic_bus_write(AXP818_DCDC5_CTRL, cfg);
+	if (ret)
+		return ret;
+
+	return pmic_bus_setbits(AXP818_OUTPUT_CTRL1,
+				AXP818_OUTPUT_CTRL1_DCDC5_EN);
+}
+
+int axp_init(void)
+{
+	u8 axp_chip_id;
+	int ret;
+
+	ret = pmic_bus_init();
+	if (ret)
+		return ret;
+
+	ret = pmic_bus_read(AXP818_CHIP_ID, &axp_chip_id);
+	if (ret)
+		return ret;
+
+	if (!(axp_chip_id == 0x51))
+		return -ENODEV;
+	else
+		return ret;
+
+	return 0;
+}