twl4030: make twl4030_i2c_write_u8 prototype consistent

u-boot standard i2c register write prototype is
i2c_reg_write(u8 addr, u8 reg, u8 val)

twl4030_i2c_write_u8(u8 addr, u8 val, u8 reg)
does not provide consistency, so switch the prototype to be
consistent with rest of u-boot i2c operations:
twl4030_i2c_write_u8(u8 addr, u8 reg, u8 val)

Signed-off-by: Nishanth Menon <nm@ti.com>

3 files changed, 31 insertions, 31 deletions

diff --git a/drivers/misc/twl4030_led.c b/drivers/misc/twl4030_led.c
index 33cea11..e150d8f 100644
--- a/drivers/misc/twl4030_led.c
+++ b/drivers/misc/twl4030_led.c
@@ -42,7 +42,7 @@ void twl4030_led_init(unsigned char ledon_mask)
 	if (ledon_mask & TWL4030_LED_LEDEN_LEDBON)
 		ledon_mask |= TWL4030_LED_LEDEN_LEDBPWM;
 
-	twl4030_i2c_write_u8(TWL4030_CHIP_LED, ledon_mask,
-			     TWL4030_LED_LEDEN);
+	twl4030_i2c_write_u8(TWL4030_CHIP_LED, TWL4030_LED_LEDEN,
+			     ledon_mask);
 
 }
diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
index e7d5f13..2bf94b1 100644
--- a/drivers/power/twl4030.c
+++ b/drivers/power/twl4030.c
@@ -51,8 +51,8 @@ void twl4030_power_reset_init(void)
 		printf("Could not initialize hardware reset\n");
 	} else {
 		val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
-		if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, val,
-					 TWL4030_PM_MASTER_P1_SW_EVENTS)) {
+		if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+					 TWL4030_PM_MASTER_P1_SW_EVENTS, val)) {
 			printf("Error:TWL4030: failed to write the power register\n");
 			printf("Could not initialize hardware reset\n");
 		}
@@ -68,8 +68,8 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
 	int ret;
 
 	/* Select the Voltage */
-	ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_val,
-				vsel_reg);
+	ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg,
+				   vsel_val);
 	if (ret != 0) {
 		printf("Could not write vsel to reg %02x (%d)\n",
 			vsel_reg, ret);
@@ -77,8 +77,8 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
 	}
 
 	/* Select the Device Group (enable the supply if dev_grp_sel != 0) */
-	ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp_sel,
-				dev_grp);
+	ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp,
+				   dev_grp_sel);
 	if (ret != 0)
 		printf("Could not write grp_sel to reg %02x (%d)\n",
 			dev_grp, ret);
diff --git a/drivers/usb/phy/twl4030.c b/drivers/usb/phy/twl4030.c
index 54d2e61..f41cc07 100644
--- a/drivers/usb/phy/twl4030.c
+++ b/drivers/usb/phy/twl4030.c
@@ -54,7 +54,7 @@ static int twl4030_usb_write(u8 address, u8 data)
 {
 	int ret;
 
-	ret = twl4030_i2c_write_u8(TWL4030_CHIP_USB, data, address);
+	ret = twl4030_i2c_write_u8(TWL4030_CHIP_USB, address, data);
 	if (ret != 0)
 		printf("TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
 
@@ -78,40 +78,40 @@ static int twl4030_usb_read(u8 address)
 static void twl4030_usb_ldo_init(void)
 {
 	/* Enable writing to power configuration registers */
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0xC0,
-			     TWL4030_PM_MASTER_PROTECT_KEY);
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x0C,
-			     TWL4030_PM_MASTER_PROTECT_KEY);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+			     TWL4030_PM_MASTER_PROTECT_KEY, 0xC0);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+			     TWL4030_PM_MASTER_PROTECT_KEY, 0x0C);
 
 	/* put VUSB3V1 LDO in active state */
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
-			     TWL4030_PM_RECEIVER_VUSB_DEDICATED2);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+			     TWL4030_PM_RECEIVER_VUSB_DEDICATED2, 0x00);
 
 	/* input to VUSB3V1 LDO is from VBAT, not VBUS */
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x14,
-			     TWL4030_PM_RECEIVER_VUSB_DEDICATED1);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+			     TWL4030_PM_RECEIVER_VUSB_DEDICATED1, 0x14);
 
 	/* turn on 3.1V regulator */
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
-			     TWL4030_PM_RECEIVER_VUSB3V1_DEV_GRP);
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
-			     TWL4030_PM_RECEIVER_VUSB3V1_TYPE);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+			     TWL4030_PM_RECEIVER_VUSB3V1_DEV_GRP, 0x20);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+			     TWL4030_PM_RECEIVER_VUSB3V1_TYPE, 0x00);
 
 	/* turn on 1.5V regulator */
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
-			     TWL4030_PM_RECEIVER_VUSB1V5_DEV_GRP);
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
-			     TWL4030_PM_RECEIVER_VUSB1V5_TYPE);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+			     TWL4030_PM_RECEIVER_VUSB1V5_DEV_GRP, 0x20);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+			     TWL4030_PM_RECEIVER_VUSB1V5_TYPE, 0x00);
 
 	/* turn on 1.8V regulator */
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20,
-			     TWL4030_PM_RECEIVER_VUSB1V8_DEV_GRP);
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00,
-			     TWL4030_PM_RECEIVER_VUSB1V8_TYPE);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+			     TWL4030_PM_RECEIVER_VUSB1V8_DEV_GRP, 0x20);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
+			     TWL4030_PM_RECEIVER_VUSB1V8_TYPE, 0x00);
 
 	/* disable access to power configuration registers */
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x00,
-			     TWL4030_PM_MASTER_PROTECT_KEY);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+			     TWL4030_PM_MASTER_PROTECT_KEY, 0x00);
 }
 
 static void twl4030_phy_power(void)