summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-03-23 20:18:25 +0000
committerwdenk <wdenk>2004-03-23 20:18:25 +0000
commitefa329cb892c8b9a5e453638b3ca57c94b71e9a2 (patch)
treeb8c5361b7054e21662e619100c1a7f53e6d8de0a /drivers
parent7d7ce4125f769a21a321c3df972272c5854d54f7 (diff)
downloadu-boot-imx-efa329cb892c8b9a5e453638b3ca57c94b71e9a2.zip
u-boot-imx-efa329cb892c8b9a5e453638b3ca57c94b71e9a2.tar.gz
u-boot-imx-efa329cb892c8b9a5e453638b3ca57c94b71e9a2.tar.bz2
* Add start-up delay to make sure power has stabilized before
attempting to switch on USB on SX1 board. * Patch by Josef Wagner, 18 Mar 2004: - Add support for MicroSys XM250 board (PXA255) - Add support for MicroSys PM828 board (MPC8280) - Add support for 32 MB Flash on PM825/826 - new SDRAM refresh rate for PM825/PM826 - added support for MicroSys PM520 (MPC5200) - replaced Query by Identify command in CPU86/flash.c to support 28F160F3B * Fix wrap around problem with udelay() on ARM920T * Add support for Macronix flash on TRAB board
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usbdcore_omap1510.c24
1 files changed, 24 insertions, 0 deletions
diff --git a/drivers/usbdcore_omap1510.c b/drivers/usbdcore_omap1510.c
index 7a90848..1d54a63 100644
--- a/drivers/usbdcore_omap1510.c
+++ b/drivers/usbdcore_omap1510.c
@@ -40,6 +40,7 @@
#include "usbdcore_ep0.h"
+#define UDC_INIT_MDELAY 80 /* Device settle delay */
#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */
/* Some kind of debugging output... */
@@ -1087,6 +1088,11 @@ int udc_init (void)
{
u16 udc_rev;
uchar value;
+ ulong gpio;
+ int i;
+
+ /* Let the device settle down before we start */
+ for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000);
udc_device = NULL;
@@ -1127,6 +1133,24 @@ int udc_init (void)
i2c_read (0x32, 0x03, 1, &value, 1);
value |= 0x01;
i2c_write (0x32, 0x03, 1, &value, 1);
+
+ gpio = inl(GPIO_PIN_CONTROL_REG);
+ gpio |= 0x0002; /* A_IRDA_OFF */
+ gpio |= 0x0800; /* A_SWITCH */
+ gpio |= 0x8000; /* A_USB_ON */
+ outl (gpio, GPIO_PIN_CONTROL_REG);
+
+ gpio = inl(GPIO_DIR_CONTROL_REG);
+ gpio &= ~0x0002; /* A_IRDA_OFF */
+ gpio &= ~0x0800; /* A_SWITCH */
+ gpio &= ~0x8000; /* A_USB_ON */
+ outl (gpio, GPIO_DIR_CONTROL_REG);
+
+ gpio = inl(GPIO_DATA_OUTPUT_REG);
+ gpio |= 0x0002; /* A_IRDA_OFF */
+ gpio &= ~0x0800; /* A_SWITCH */
+ gpio &= ~0x8000; /* A_USB_ON */
+ outl (gpio, GPIO_DATA_OUTPUT_REG);
#endif
/* The VBUS_MODE bit selects whether VBUS detection is done via