summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-11-25 13:01:58 +0100
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-11-25 13:01:58 +0100
commitb8a7c467960ffb4d5a5e1eef5f7783fb6f594542 (patch)
treeda95eeaa6578048658ff60f20a9b498730c67917 /drivers
parent3786a942b5892441982f5d8908303f360bac9f8c (diff)
parent1d4fd0dc3b45de7b7a706285845ef5b527422014 (diff)
downloadu-boot-imx-b8a7c467960ffb4d5a5e1eef5f7783fb6f594542.zip
u-boot-imx-b8a7c467960ffb4d5a5e1eef5f7783fb6f594542.tar.gz
u-boot-imx-b8a7c467960ffb4d5a5e1eef5f7783fb6f594542.tar.bz2
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Diffstat (limited to 'drivers')
-rw-r--r--drivers/spi/mxc_spi.c9
-rw-r--r--drivers/usb/host/ehci-mx5.c146
-rw-r--r--drivers/usb/host/ehci-mx6.c5
-rw-r--r--drivers/usb/host/ehci-mxc.c225
4 files changed, 302 insertions, 83 deletions
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 13bebe8..859c43f 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -140,8 +140,8 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
reg_ctrl = reg_read(&regs->ctrl);
/* Reset spi */
- reg_write(&regs->ctrl, 0);
- reg_write(&regs->ctrl, (reg_ctrl | 0x1));
+ reg_write(&regs->ctrl, (reg_ctrl & ~MXC_CSPICTRL_EN));
+ reg_write(&regs->ctrl, (reg_ctrl | MXC_CSPICTRL_EN));
/*
* The following computation is taken directly from Freescale's code.
@@ -387,7 +387,7 @@ static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs)
if (cs > 3) {
mxcs->gpio = cs >> 8;
cs &= 3;
- ret = gpio_direction_output(mxcs->gpio, 0);
+ ret = gpio_direction_output(mxcs->gpio, !(mxcs->ss_pol));
if (ret) {
printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio);
return -EINVAL;
@@ -414,6 +414,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
return NULL;
}
+ mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
+
ret = decode_cs(mxcs, cs);
if (ret < 0) {
free(mxcs);
@@ -425,7 +427,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
mxcs->slave.bus = bus;
mxcs->slave.cs = cs;
mxcs->base = spi_bases[bus];
- mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
ret = spi_cfg_mxc(mxcs, cs, max_hz, mode);
if (ret) {
diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c
index 9a2c295..adbed5c 100644
--- a/drivers/usb/host/ehci-mx5.c
+++ b/drivers/usb/host/ehci-mx5.c
@@ -29,34 +29,63 @@
#define MX5_USBOTHER_REGS_OFFSET 0x800
-#define MXC_OTG_OFFSET 0
-#define MXC_H1_OFFSET 0x200
-#define MXC_H2_OFFSET 0x400
+#define MXC_OTG_OFFSET 0
+#define MXC_H1_OFFSET 0x200
+#define MXC_H2_OFFSET 0x400
+#define MXC_H3_OFFSET 0x600
#define MXC_USBCTRL_OFFSET 0
#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
#define MXC_USB_CTRL_1_OFFSET 0x10
#define MXC_USBH2CTRL_OFFSET 0x14
+#define MXC_USBH3CTRL_OFFSET 0x18
/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
+/* OTG wakeup intr enable */
+#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27)
+/* OTG power mask */
+#define MXC_OTG_UCTRL_OPM_BIT (1 << 24)
+/* OTG power pin polarity */
+#define MXC_OTG_UCTRL_O_PWR_POL_BIT (1 << 24)
+/* Host1 ULPI interrupt enable */
+#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12)
+/* HOST1 wakeup intr enable */
+#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11)
+/* HOST1 power mask */
+#define MXC_H1_UCTRL_H1PM_BIT (1 << 8)
+/* HOST1 power pin polarity */
+#define MXC_H1_UCTRL_H1_PWR_POL_BIT (1 << 8)
/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */
+/* OTG Polarity of Overcurrent */
+#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9)
+/* OTG Disable Overcurrent Event */
+#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8)
+/* UH1 Polarity of Overcurrent */
+#define MXC_H1_OC_POL_BIT (1 << 6)
+/* UH1 Disable Overcurrent Event */
+#define MXC_H1_OC_DIS_BIT (1 << 5)
+/* OTG Power Pin Polarity */
+#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3)
/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
+#define MXC_H2_UCTRL_H2_OC_POL_BIT (1 << 31)
+#define MXC_H2_UCTRL_H2_OC_DIS_BIT (1 << 30)
+#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
+#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
+#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
+#define MXC_H2_UCTRL_H2_PWR_POL_BIT (1 << 4)
+
+/* USBH3CTRL */
+#define MXC_H3_UCTRL_H3_OC_POL_BIT (1 << 31)
+#define MXC_H3_UCTRL_H3_OC_DIS_BIT (1 << 30)
+#define MXC_H3_UCTRL_H3UIE_BIT (1 << 8)
+#define MXC_H3_UCTRL_H3WIE_BIT (1 << 7)
+#define MXC_H3_UCTRL_H3_PWR_POL_BIT (1 << 4)
/* USB_CTRL_1 */
-#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
+#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
/* USB pin configuration */
#define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \
@@ -143,24 +172,42 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
if (flags & MXC_EHCI_INTERNAL_PHY) {
v = __raw_readl(usbother_base +
MXC_USB_PHY_CTR_FUNC_OFFSET);
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
+ else
+ v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ /* OC/USBPWR is used */
+ v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+ else
/* OC/USBPWR is not used */
v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
+#ifdef CONFIG_MX51
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
else
- /* OC/USBPWR is used */
- v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+ v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
+#endif
__raw_writel(v, usbother_base +
MXC_USB_PHY_CTR_FUNC_OFFSET);
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+#ifdef CONFIG_MX51
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ v &= ~MXC_OTG_UCTRL_OPM_BIT;
+ else
v |= MXC_OTG_UCTRL_OPM_BIT;
+#endif
+#ifdef CONFIG_MX53
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_OTG_UCTRL_O_PWR_POL_BIT;
else
- v &= ~MXC_OTG_UCTRL_OPM_BIT;
+ v &= ~MXC_OTG_UCTRL_O_PWR_POL_BIT;
+#endif
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
}
break;
- case 1: /* Host 1 Host ULPI */
+ case 1: /* Host 1 ULPI */
#ifdef CONFIG_MX51
/* The clock for the USBH1 ULPI port will come externally
from the PHY. */
@@ -170,13 +217,25 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
#endif
v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+#ifdef CONFIG_MX51
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used */
+ v &= ~MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask unused */
else
- v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used */
+ v |= MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask used */
+#endif
+#ifdef CONFIG_MX53
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_H1_UCTRL_H1_PWR_POL_BIT;
+ else
+ v &= ~MXC_H1_UCTRL_H1_PWR_POL_BIT;
+#endif
__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_H1_OC_POL_BIT;
+ else
+ v &= ~MXC_H1_OC_POL_BIT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
else
@@ -186,24 +245,59 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
break;
case 2: /* Host 2 ULPI */
v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
+#ifdef CONFIG_MX51
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used */
+ v &= ~MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask unused */
else
- v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used */
-
+ v |= MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask used */
+#endif
+#ifdef CONFIG_MX53
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_H2_UCTRL_H2_OC_POL_BIT;
+ else
+ v &= ~MXC_H2_UCTRL_H2_OC_POL_BIT;
+ if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ v &= ~MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is used */
+ else
+ v |= MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is not used */
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_H2_UCTRL_H2_PWR_POL_BIT;
+ else
+ v &= ~MXC_H2_UCTRL_H2_PWR_POL_BIT;
+#endif
__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
break;
+#ifdef CONFIG_MX53
+ case 3: /* Host 3 ULPI */
+ v = __raw_readl(usbother_base + MXC_USBH3CTRL_OFFSET);
+ if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
+ v |= MXC_H3_UCTRL_H3_OC_POL_BIT;
+ else
+ v &= ~MXC_H3_UCTRL_H3_OC_POL_BIT;
+ if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+ v &= ~MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is used */
+ else
+ v |= MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is not used */
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MXC_H3_UCTRL_H3_PWR_POL_BIT;
+ else
+ v &= ~MXC_H3_UCTRL_H3_PWR_POL_BIT;
+ __raw_writel(v, usbother_base + MXC_USBH3CTRL_OFFSET);
+ break;
+#endif
}
return ret;
}
-void __board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
+int __weak board_ehci_hcd_init(int port)
{
+ return 0;
}
-void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
- __attribute((weak, alias("__board_ehci_hcd_postinit")));
+void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
+{
+}
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 9ce25da..1b20e41 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -159,6 +159,11 @@ static void usbh1_oc_config(void)
__raw_writel(val, usbother_base + USB_H1_CTRL_OFFSET);
}
+int __weak board_ehci_hcd_init(int port)
+{
+ return 0;
+}
+
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
struct usb_ehci *ehci;
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index a38bc9c..8633cab 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -28,14 +28,22 @@
#define USBCTRL_OTGBASE_OFFSET 0x600
-#ifdef CONFIG_MX25
-#define MX25_USB_CTRL_IP_PUE_DOWN_BIT (1<<6)
-#define MX25_USB_CTRL_HSTD_BIT (1<<5)
-#define MX25_USB_CTRL_USBTE_BIT (1<<4)
-#define MX25_USB_CTRL_OCPOL_OTG_BIT (1<<3)
-#endif
+#define MX25_OTG_SIC_SHIFT 29
+#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
+#define MX25_OTG_PM_BIT (1 << 24)
+#define MX25_OTG_PP_BIT (1 << 11)
+#define MX25_OTG_OCPOL_BIT (1 << 3)
+
+#define MX25_H1_SIC_SHIFT 21
+#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PP_BIT (1 << 18)
+#define MX25_H1_PM_BIT (1 << 16)
+#define MX25_H1_IPPUE_UP_BIT (1 << 7)
+#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
+#define MX25_H1_TLL_BIT (1 << 5)
+#define MX25_H1_USBTE_BIT (1 << 4)
+#define MX25_H1_OCPOL_BIT (1 << 2)
-#ifdef CONFIG_MX31
#define MX31_OTG_SIC_SHIFT 29
#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
#define MX31_OTG_PM_BIT (1 << 24)
@@ -49,59 +57,166 @@
#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
#define MX31_H1_PM_BIT (1 << 8)
#define MX31_H1_DT_BIT (1 << 4)
-#endif
+
+#define MX35_OTG_SIC_SHIFT 29
+#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT (1 << 24)
+#define MX35_OTG_PP_BIT (1 << 11)
+#define MX35_OTG_OCPOL_BIT (1 << 3)
+
+#define MX35_H1_SIC_SHIFT 21
+#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PP_BIT (1 << 18)
+#define MX35_H1_PM_BIT (1 << 16)
+#define MX35_H1_IPPUE_UP_BIT (1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
+#define MX35_H1_TLL_BIT (1 << 5)
+#define MX35_H1_USBTE_BIT (1 << 4)
+#define MX35_H1_OCPOL_BIT (1 << 2)
static int mxc_set_usbcontrol(int port, unsigned int flags)
{
unsigned int v;
-#ifdef CONFIG_MX25
- v = MX25_USB_CTRL_IP_PUE_DOWN_BIT | MX25_USB_CTRL_HSTD_BIT |
- MX25_USB_CTRL_USBTE_BIT | MX25_USB_CTRL_OCPOL_OTG_BIT;
-#endif
+ v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
+#if defined(CONFIG_MX25)
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
+ MX25_OTG_OCPOL_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
-#ifdef CONFIG_MX31
- v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
-
- switch (port) {
- case 0: /* OTG port */
- v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK)
- << MX31_OTG_SIC_SHIFT;
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_OTG_PM_BIT;
-
- break;
- case 1: /* H1 port */
- v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT |
- MX31_H1_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK)
- << MX31_H1_SIC_SHIFT;
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_H1_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX31_H1_DT_BIT;
-
- break;
- case 2: /* H2 port */
- v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT |
- MX31_H2_DT_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK)
- << MX31_H2_SIC_SHIFT;
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX31_H2_PM_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX31_H2_DT_BIT;
-
- break;
- default:
- return -EINVAL;
- }
-#endif
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX25_OTG_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX25_OTG_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX25_OTG_OCPOL_BIT;
+
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
+ MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
+ MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT |
+ MX25_H1_IPPUE_UP_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX25_H1_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX25_H1_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX25_H1_OCPOL_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX25_H1_TLL_BIT;
+
+ if (flags & MXC_EHCI_INTERNAL_PHY)
+ v |= MX25_H1_USBTE_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_DOWN)
+ v |= MX25_H1_IPPUE_DOWN_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_UP)
+ v |= MX25_H1_IPPUE_UP_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+#elif defined(CONFIG_MX31)
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_OTG_PM_BIT;
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_H1_PM_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX31_H1_DT_BIT;
+
+ break;
+ case 2: /* H2 port */
+ v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_H2_PM_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX31_H2_DT_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+#elif defined(CONFIG_MX35)
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
+ MX35_OTG_OCPOL_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX35_OTG_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX35_OTG_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX35_OTG_OCPOL_BIT;
+
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
+ MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT |
+ MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT |
+ MX35_H1_IPPUE_UP_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX35_H1_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX35_H1_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX35_H1_OCPOL_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX35_H1_TLL_BIT;
+
+ if (flags & MXC_EHCI_INTERNAL_PHY)
+ v |= MX35_H1_USBTE_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_DOWN)
+ v |= MX35_H1_IPPUE_DOWN_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_UP)
+ v |= MX35_H1_IPPUE_UP_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+#else
+#error MXC EHCI USB driver not supported on this platform
+#endif
writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
+
return 0;
}
@@ -119,13 +234,17 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
udelay(80);
ehci = (struct usb_ehci *)(IMX_USB_BASE +
- (0x200 * CONFIG_MXC_USB_PORT));
+ IMX_USB_PORT_OFFSET * CONFIG_MXC_USB_PORT);
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
setbits_le32(&ehci->usbmode, CM_HOST);
__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
+#ifdef CONFIG_MX35
+ /* Workaround for ENGcm11601 */
+ __raw_writel(0, &ehci->sbuscfg);
+#endif
udelay(10000);