summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorAmit Virdi <amit.virdi@st.com>2012-05-07 13:00:22 +0530
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-07-07 14:07:38 +0200
commit69fcb55f71c9e2c40a0f1de6f70b26a9ec02cfb8 (patch)
tree3f891bca3208ac68d8f598199ce0a381dd024ec0 /drivers
parent0e88ff08febcb88fc4081f0393c4fca02b847146 (diff)
downloadu-boot-imx-69fcb55f71c9e2c40a0f1de6f70b26a9ec02cfb8.zip
u-boot-imx-69fcb55f71c9e2c40a0f1de6f70b26a9ec02cfb8.tar.gz
u-boot-imx-69fcb55f71c9e2c40a0f1de6f70b26a9ec02cfb8.tar.bz2
st_smi: Enhance the error handling
This commit does the following: - Reports error if SNOR flash is not found on the board - Changes smi_read_sr to return error using which a retry mechanism is implemented for reading flash status Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com> Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/st_smi.c34
1 files changed, 21 insertions, 13 deletions
diff --git a/drivers/mtd/st_smi.c b/drivers/mtd/st_smi.c
index 9769b28..2c6d59d 100644
--- a/drivers/mtd/st_smi.c
+++ b/drivers/mtd/st_smi.c
@@ -108,11 +108,17 @@ static ulong flash_get_size(ulong base, int banknum)
{
flash_info_t *info = &flash_info[banknum];
struct flash_dev *dev;
- unsigned int value;
+ int value;
unsigned int density;
int i;
value = smi_read_id(info, banknum);
+
+ if (value < 0) {
+ printf("Flash id could not be read\n");
+ return 0;
+ }
+
density = (value >> 16) & 0xff;
for (i = 0, dev = &flash_ids[0]; dev->density != 0x0;
@@ -140,7 +146,7 @@ static ulong flash_get_size(ulong base, int banknum)
* This routine will get the status register of the flash chip present at the
* given bank
*/
-static unsigned int smi_read_sr(int bank)
+static int smi_read_sr(int bank)
{
u32 ctrlreg1;
@@ -174,13 +180,11 @@ static unsigned int smi_read_sr(int bank)
*/
static int smi_wait_till_ready(int bank, int timeout)
{
- int count;
- unsigned int sr;
+ int sr;
/* One chip guarantees max 5 msec wait here after page writes,
but potentially three seconds (!) after page erase. */
- for (count = 0; count < timeout; count++) {
-
+ do {
sr = smi_read_sr(bank);
if (sr < 0)
break;
@@ -189,7 +193,8 @@ static int smi_wait_till_ready(int bank, int timeout)
/* Try again after 1m-sec */
udelay(1000);
- }
+ } while (timeout--);
+
printf("SMI controller is still in wait, timeout=%d\n", timeout);
return -EIO;
}
@@ -205,6 +210,7 @@ static int smi_write_enable(int bank)
{
u32 ctrlreg1;
int timeout = WMODE_TOUT;
+ int sr;
/* Store the CTRL REG1 state */
ctrlreg1 = readl(&smicntl->smi_cr1);
@@ -221,14 +227,16 @@ static int smi_write_enable(int bank)
/* Restore the CTRL REG1 state */
writel(ctrlreg1, &smicntl->smi_cr1);
- while (timeout--) {
- if (smi_read_sr(bank) & (1 << (bank + WM_SHIFT)))
+ do {
+ sr = smi_read_sr(bank);
+ if (sr < 0)
break;
- udelay(1000);
- }
+ else if (sr & (1 << (bank + WM_SHIFT)))
+ return 0;
- if (timeout)
- return 0;
+ /* Try again after 1m-sec */
+ udelay(1000);
+ } while (timeout--);
return -1;
}