summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorMarek Vasut <marex@denx.de>2014-11-04 04:23:25 +0100
committerMarek Vasut <marex@denx.de>2014-11-07 16:32:02 +0100
commit481a11c552978132a7e291213762af82ed3e7003 (patch)
tree26cce85bea2af306b8e04d4800b36ba69942f439 /drivers
parentd1b6c77e1f7ed4821da008c80325f589fcf44df9 (diff)
downloadu-boot-imx-481a11c552978132a7e291213762af82ed3e7003.zip
u-boot-imx-481a11c552978132a7e291213762af82ed3e7003.tar.gz
u-boot-imx-481a11c552978132a7e291213762af82ed3e7003.tar.bz2
usb: s3c-otg: Allow custom gusbcfg
Allow passing in a custom configuration of the gusbcfg register via platform data. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/gadget/s3c_udc_otg.c18
-rw-r--r--drivers/usb/gadget/s3c_udc_otg_xfer_dma.c2
2 files changed, 13 insertions, 7 deletions
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index b910053..7653f03 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -104,7 +104,7 @@ static void stop_activity(struct s3c_udc *dev,
struct usb_gadget_driver *driver);
static int udc_enable(struct s3c_udc *dev);
static void udc_set_address(struct s3c_udc *dev, unsigned char address);
-static void reconfig_usbd(void);
+static void reconfig_usbd(struct s3c_udc *dev);
static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed);
static void nuke(struct s3c_ep *ep, int status);
static int s3c_udc_set_halt(struct usb_ep *_ep, int value);
@@ -215,7 +215,7 @@ static int udc_enable(struct s3c_udc *dev)
debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev);
otg_phy_init(dev);
- reconfig_usbd();
+ reconfig_usbd(dev);
debug_cond(DEBUG_SETUP != 0,
"S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n",
@@ -396,15 +396,17 @@ static void stop_activity(struct s3c_udc *dev,
udc_reinit(dev);
}
-static void reconfig_usbd(void)
+static void reconfig_usbd(struct s3c_udc *dev)
{
/* 2. Soft-reset OTG Core and then unreset again. */
int i;
unsigned int uTemp = writel(CORE_SOFT_RESET, &reg->grstctl);
+ uint32_t dflt_gusbcfg;
debug("Reseting OTG controller\n");
- writel(0<<15 /* PHY Low Power Clock sel*/
+ dflt_gusbcfg =
+ 0<<15 /* PHY Low Power Clock sel*/
|1<<14 /* Non-Periodic TxFIFO Rewind Enable*/
|0x5<<10 /* Turnaround time*/
|0<<9 | 0<<8 /* [0:HNP disable,1:HNP enable][ 0:SRP disable*/
@@ -413,8 +415,12 @@ static void reconfig_usbd(void)
|0<<6 /* 0: high speed utmi+, 1: full speed serial*/
|0<<4 /* 0: utmi+, 1:ulpi*/
|1<<3 /* phy i/f 0:8bit, 1:16bit*/
- |0x7<<0, /* HS/FS Timeout**/
- &reg->gusbcfg);
+ |0x7<<0; /* HS/FS Timeout**/
+
+ if (dev->pdata->usb_gusbcfg)
+ dflt_gusbcfg = dev->pdata->usb_gusbcfg;
+
+ writel(dflt_gusbcfg, &reg->gusbcfg);
/* 3. Put the OTG device core in the disconnected state.*/
uTemp = readl(&reg->dctl);
diff --git a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
index 4f69b22..9c54b46 100644
--- a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
+++ b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
@@ -551,7 +551,7 @@ static int s3c_udc_irq(int irq, void *_dev)
debug_cond(DEBUG_ISR,
"\t\tOTG core got reset (%d)!!\n",
reset_available);
- reconfig_usbd();
+ reconfig_usbd(dev);
dev->ep0state = WAIT_FOR_SETUP;
reset_available = 0;
s3c_udc_pre_setup();