summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLiu Gang <Gang.Liu@freescale.com>2012-08-09 05:10:03 +0000
committerAndy Fleming <afleming@freescale.com>2012-08-23 10:24:15 -0500
commit461632bd71152fefd7f6b155d6b870e586212416 (patch)
tree3ef7efdffdd08f753a3b3a1b2ca88559088749dc /drivers
parentb5f7c8732ad99b0c1a7fa456f706de1ab7d74eef (diff)
downloadu-boot-imx-461632bd71152fefd7f6b155d6b870e586212416.zip
u-boot-imx-461632bd71152fefd7f6b155d6b870e586212416.tar.gz
u-boot-imx-461632bd71152fefd7f6b155d6b870e586212416.tar.bz2
powerpc/corenet_ds: Slave module for boot from PCIE
When boot from PCIE, slave's core should be in holdoff after powered on for some specific requirements. Master will release the slave's core at the right time by PCIE interface. Slave's ucode and ENV can be stored in master's memory space, then slave can fetch them through PCIE interface. For the corenet platform, ucode is for Fman. NOTE: Because the slave can not erase, write master's NOR flash by PCIE interface, so it can not modify the ENV parameters stored in master's NOR flash using "saveenv" or other commands. environment and requirement: master: 1. NOR flash for its own u-boot image, ucode and ENV space. 2. Slave's u-boot image is in master NOR flash. 3. Put the slave's ucode and ENV into it's own memory space. 4. Normally boot from local NOR flash. 5. Configure PCIE system if needed. slave: 1. Just has EEPROM for RCW. No flash for u-boot image, ucode and ENV. 2. Boot location should be set to one PCIE interface by RCW. 3. RCW should configure the SerDes, PCIE interfaces correctly. 4. Must set all the cores in holdoff by RCW. 5. Must be powered on before master's boot. For the slave module, need to finish these processes: 1. Set the boot location to one PCIE interface by RCW. 2. Set a specific TLB entry for the boot process. 3. Set a LAW entry with the TargetID of one PCIE for the boot. 4. Set a specific TLB entry in order to fetch ucode and ENV from master. 5. Set a LAW entry with the TargetID one of the PCIE ports for ucode and ENV. 6. Slave's u-boot image should be generated specifically by make xxxx_SRIO_PCIE_BOOT_config. This will set SYS_TEXT_BASE=0xFFF80000 and other configurations. In addition, the processes are very similar between boot from SRIO and boot from PCIE. Some configurations like the address spaces can be set to the same. So the module of boot from PCIE was added based on the existing module of boot from SRIO, and the following changes were needed: 1. Updated the README.srio-boot-corenet to add descriptions about boot from PCIE, and change the name to README.srio-pcie-boot-corenet. 2. Changed the compile config "xxxx_SRIOBOOT_SLAVE" to "xxxx_SRIO_PCIE_BOOT", and the image builded with "xxxx_SRIO_PCIE_BOOT" can support both the boot from SRIO and from PCIE. 3. Updated other macros and documents if needed to add information about boot from PCIE. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/misc/fsl_law.c39
1 files changed, 33 insertions, 6 deletions
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index a71a0ce..223cd5d 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -275,25 +275,52 @@ void init_laws(void)
law_table[i].size, law_table[i].trgt_id);
}
-#ifdef CONFIG_SRIOBOOT_SLAVE
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
/* check RCW to get which port is used for boot */
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
u32 bootloc = in_be32(&gur->rcwsr[6]);
- /* in SRIO boot we need to set specail LAWs for SRIO interfaces */
+ /*
+ * in SRIO or PCIE boot we need to set specail LAWs for
+ * SRIO or PCIE interfaces.
+ */
switch ((bootloc & FSL_CORENET_RCWSR6_BOOT_LOC) >> 23) {
+ case 0x0: /* boot from PCIE1 */
+ set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+ LAW_SIZE_1M,
+ LAW_TRGT_IF_PCIE_1);
+ set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+ LAW_SIZE_1M,
+ LAW_TRGT_IF_PCIE_1);
+ break;
+ case 0x1: /* boot from PCIE2 */
+ set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+ LAW_SIZE_1M,
+ LAW_TRGT_IF_PCIE_2);
+ set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+ LAW_SIZE_1M,
+ LAW_TRGT_IF_PCIE_2);
+ break;
+ case 0x2: /* boot from PCIE3 */
+ set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+ LAW_SIZE_1M,
+ LAW_TRGT_IF_PCIE_3);
+ set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+ LAW_SIZE_1M,
+ LAW_TRGT_IF_PCIE_3);
+ break;
case 0x8: /* boot from SRIO1 */
- set_next_law(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+ set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
LAW_SIZE_1M,
LAW_TRGT_IF_RIO_1);
- set_next_law(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+ set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
LAW_SIZE_1M,
LAW_TRGT_IF_RIO_1);
break;
case 0x9: /* boot from SRIO2 */
- set_next_law(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+ set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
LAW_SIZE_1M,
LAW_TRGT_IF_RIO_2);
- set_next_law(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+ set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
LAW_SIZE_1M,
LAW_TRGT_IF_RIO_2);
break;