summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorBecky Bruce <beckyb@kernel.crashing.org>2009-02-02 16:34:51 -0600
committerStefan Roese <sr@denx.de>2009-02-05 11:20:05 +0100
commit09ce9921a7d8b1ce764656b14b42217bbf4faa38 (patch)
treec8d83aa2012342e0a790a046bc6a8fa3bba2c5a5 /drivers
parent9d8811c5bd2b7dd6307742cf22fbdb7953b6f816 (diff)
downloadu-boot-imx-09ce9921a7d8b1ce764656b14b42217bbf4faa38.zip
u-boot-imx-09ce9921a7d8b1ce764656b14b42217bbf4faa38.tar.gz
u-boot-imx-09ce9921a7d8b1ce764656b14b42217bbf4faa38.tar.bz2
flash/cfi_flash: Use virtual sector start address, not phys
include/flash.h was commented to say that the address in flash_info->start was a physical address. However, from u-boot's point of view, and looking at most flash code, it makes more sense for this to be a virtual address. So I corrected the comment to indicate that this was a virtual address. The only flash driver that was actually treating the address as physical was the mtd/cfi_flash driver. However, this code was using it inconsistently as it actually directly dereferenced the "start" element, while it used map_physmem to get a virtual address in other places. I changed this driver so that the code which initializes the info->start field calls map_physmem to get a virtual address, eliminating the need for further map_physmem calls. The code is now consistent. The *only* place a physical address should be used is when defining the flash banks list that is used to initialize the flash_info struct, usually found in the board config file. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/cfi_flash.c53
1 files changed, 24 insertions, 29 deletions
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 84ff7e8..4cb5fb5 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -305,17 +305,12 @@ flash_map (flash_info_t * info, flash_sect_t sect, uint offset)
{
unsigned int byte_offset = offset * info->portwidth;
- return map_physmem(info->start[sect] + byte_offset,
- flash_sector_size(info, sect) - byte_offset,
- MAP_NOCACHE);
+ return (void *)(info->start[sect] + byte_offset);
}
static inline void flash_unmap(flash_info_t *info, flash_sect_t sect,
unsigned int offset, void *addr)
{
- unsigned int byte_offset = offset * info->portwidth;
-
- unmap_physmem(addr, flash_sector_size(info, sect) - byte_offset);
}
/*-----------------------------------------------------------------------
@@ -802,13 +797,11 @@ static flash_sect_t find_sector (flash_info_t * info, ulong addr)
static int flash_write_cfiword (flash_info_t * info, ulong dest,
cfiword_t cword)
{
- void *dstaddr;
+ void *dstaddr = (void *)dest;
int flag;
flash_sect_t sect = 0;
char sect_found = 0;
- dstaddr = map_physmem(dest, info->portwidth, MAP_NOCACHE);
-
/* Check if Flash is (sufficiently) erased */
switch (info->portwidth) {
case FLASH_CFI_8BIT:
@@ -827,10 +820,8 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
flag = 0;
break;
}
- if (!flag) {
- unmap_physmem(dstaddr, info->portwidth);
+ if (!flag)
return ERR_NOT_ERASED;
- }
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
@@ -873,8 +864,6 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
if (flag)
enable_interrupts ();
- unmap_physmem(dstaddr, info->portwidth);
-
if (!sect_found)
sect = find_sector (info, dest);
@@ -890,7 +879,7 @@ static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
int cnt;
int retcode;
void *src = cp;
- void *dst = map_physmem(dest, len, MAP_NOCACHE);
+ void *dst = dest;
void *dst2 = dst;
int flag = 0;
uint offset = 0;
@@ -1052,7 +1041,6 @@ static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
}
out_unmap:
- unmap_physmem(dst, len);
return retcode;
}
#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
@@ -1301,7 +1289,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
/* handle unaligned start */
if ((aln = addr - wp) != 0) {
cword.l = 0;
- p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
+ p = (uchar *)wp;
for (i = 0; i < aln; ++i)
flash_add_byte (info, &cword, flash_read8(p + i));
@@ -1313,7 +1301,6 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
flash_add_byte (info, &cword, flash_read8(p + i));
rc = flash_write_cfiword (info, wp, cword);
- unmap_physmem(p, info->portwidth);
if (rc != 0)
return rc;
@@ -1372,14 +1359,13 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
* handle unaligned tail bytes
*/
cword.l = 0;
- p = map_physmem(wp, info->portwidth, MAP_NOCACHE);
+ p = (uchar *)wp;
for (i = 0; (i < info->portwidth) && (cnt > 0); ++i) {
flash_add_byte (info, &cword, *src++);
--cnt;
}
for (; i < info->portwidth; ++i)
flash_add_byte (info, &cword, flash_read8(p + i));
- unmap_physmem(p, info->portwidth);
return flash_write_cfiword (info, wp, cword);
}
@@ -1618,7 +1604,7 @@ static void flash_read_jedec_ids (flash_info_t * info)
* board_flash_get_legacy needs to fill in at least:
* info->portwidth, info->chipwidth and info->interface for Jedec probing.
*/
-static int flash_detect_legacy(ulong base, int banknum)
+static int flash_detect_legacy(phys_addr_t base, int banknum)
{
flash_info_t *info = &flash_info[banknum];
@@ -1634,7 +1620,10 @@ static int flash_detect_legacy(ulong base, int banknum)
for (i = 0; i < sizeof(modes) / sizeof(modes[0]); i++) {
info->vendor = modes[i];
- info->start[0] = base;
+ info->start[0] =
+ (ulong)map_physmem(base,
+ info->portwith,
+ MAP_NOCACHE);
if (info->portwidth == FLASH_CFI_8BIT
&& info->interface == FLASH_CFI_X8X16) {
info->addr_unlock1 = 0x2AAA;
@@ -1648,8 +1637,11 @@ static int flash_detect_legacy(ulong base, int banknum)
info->manufacturer_id,
info->device_id,
info->device_id2);
- if (jedec_flash_match(info, base))
+ if (jedec_flash_match(info, info->start[0]))
break;
+ else
+ unmap_physmem(info->start[0],
+ MAP_NOCACHE);
}
}
@@ -1671,7 +1663,7 @@ static int flash_detect_legacy(ulong base, int banknum)
return 0; /* use CFI */
}
#else
-static inline int flash_detect_legacy(ulong base, int banknum)
+static inline int flash_detect_legacy(phys_addr_t base, int banknum)
{
return 0; /* use CFI */
}
@@ -1826,12 +1818,12 @@ static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry)
* The following code cannot be run from FLASH!
*
*/
-ulong flash_get_size (ulong base, int banknum)
+ulong flash_get_size (phys_addr_t base, int banknum)
{
flash_info_t *info = &flash_info[banknum];
int i, j;
flash_sect_t sect_cnt;
- unsigned long sector;
+ phys_addr_t sector;
unsigned long tmp;
int size_ratio;
uchar num_erase_regions;
@@ -1847,7 +1839,7 @@ ulong flash_get_size (ulong base, int banknum)
info->legacy_unlock = 0;
#endif
- info->start[0] = base;
+ info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE);
if (flash_detect_cfi (info, &qry)) {
info->vendor = le16_to_cpu(qry.p_id);
@@ -1939,7 +1931,10 @@ ulong flash_get_size (ulong base, int banknum)
printf("ERROR: too many flash sectors\n");
break;
}
- info->start[sect_cnt] = sector;
+ info->start[sect_cnt] =
+ (ulong)map_physmem(sector,
+ info->portwidth,
+ MAP_NOCACHE);
sector += (erase_region_size * size_ratio);
/*
@@ -2016,7 +2011,7 @@ unsigned long flash_init (void)
char *s = getenv("unlock");
#endif
-#define BANK_BASE(i) (((unsigned long [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
+#define BANK_BASE(i) (((phys_addr_t [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
/* Init: no FLASHes known */
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {