ARM: NET: Remove the IXP NPE ethernet driver

This driver is no longer used, remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michael Schwingen <michael@schwingen.org>
Cc: Tom Rini <trini@ti.com>

150 files changed, 0 insertions, 65938 deletions

diff --git a/drivers/net/npe/IxEthAcc.c b/drivers/net/npe/IxEthAcc.c
deleted file mode 100644
index 05a9e05..0000000
--- a/drivers/net/npe/IxEthAcc.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/**
- * @file IxEthAcc.c
- *
- * @author Intel Corporation
- * @date 20-Feb-2001
- *
- * @brief This file contains the implementation of the IXP425 Ethernet Access Component
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-
-#include "IxEthAcc.h"
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-#include "IxEthDB.h"
-#endif
-#include "IxFeatureCtrl.h"
-
-#include "IxEthAcc_p.h"
-#include "IxEthAccMac_p.h"
-#include "IxEthAccMii_p.h"
-
-/**
- * @addtogroup IxEthAcc
- *@{
- */
-
-
-/**
- * @brief System-wide information data strucure.
- *
- * @ingroup IxEthAccPri
- *
- */
-
-IxEthAccInfo ixEthAccDataInfo;
-extern PUBLIC IxEthAccMacState ixEthAccMacState[];
-extern PUBLIC IxOsalMutex ixEthAccControlInterfaceMutex;
-
-/**
- * @brief System-wide information
- *
- * @ingroup IxEthAccPri
- *
- */
-BOOL ixEthAccServiceInit = false;
-
-/* global filtering bit mask */
-PUBLIC UINT32 ixEthAccNewSrcMask;
-
-/**
- * @brief Per port information data strucure.
- *
- * @ingroup IxEthAccPri
- *
- */
-
-IxEthAccPortDataInfo ixEthAccPortData[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-PUBLIC IxEthAccStatus ixEthAccInit()
-{
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-  /*
-   * Initialize Control plane
-   */
-  if (ixEthDBInit() != IX_ETH_DB_SUCCESS)
-  {
-      IX_ETH_ACC_WARNING_LOG("ixEthAccInit: EthDB init failed\n", 0, 0, 0, 0, 0, 0);
-
-      return IX_ETH_ACC_FAIL;
-  }
-#endif
-
-  if (IX_FEATURE_CTRL_SWCONFIG_ENABLED == ixFeatureCtrlSwConfigurationCheck (IX_FEATURECTRL_ETH_LEARNING))
-  {
-      ixEthAccNewSrcMask = (~0); /* want all the bits */
-  }
-  else
-  {
-      ixEthAccNewSrcMask = (~IX_ETHACC_NE_NEWSRCMASK); /* want all but the NewSrc bit */
-  }
-
-  /*
-   * Initialize Data plane
-   */
-   if ( ixEthAccInitDataPlane()  != IX_ETH_ACC_SUCCESS )
-   {
-      IX_ETH_ACC_WARNING_LOG("ixEthAccInit: data plane init failed\n", 0, 0, 0, 0, 0, 0);
-
-       return IX_ETH_ACC_FAIL;
-   }
-
-
-   if ( ixEthAccQMgrQueuesConfig() != IX_ETH_ACC_SUCCESS )
-   {
-      IX_ETH_ACC_WARNING_LOG("ixEthAccInit: queue config failed\n", 0, 0, 0, 0, 0, 0);
-
-       return IX_ETH_ACC_FAIL;
-   }
-
-   /*
-    * Initialize MII
-    */
-   if ( ixEthAccMiiInit() != IX_ETH_ACC_SUCCESS )
-   {
-      IX_ETH_ACC_WARNING_LOG("ixEthAccInit: Mii init failed\n", 0, 0, 0, 0, 0, 0);
-
-       return IX_ETH_ACC_FAIL;
-   }
-
-   /*
-    * Initialize MAC I/O memory
-    */
-   if (ixEthAccMacMemInit() != IX_ETH_ACC_SUCCESS)
-   {
-      IX_ETH_ACC_WARNING_LOG("ixEthAccInit: Mac init failed\n", 0, 0, 0, 0, 0, 0);
-
-     return IX_ETH_ACC_FAIL;
-   }
-
-   /*
-    * Initialize control plane interface lock
-    */
-   if (ixOsalMutexInit(&ixEthAccControlInterfaceMutex) != IX_SUCCESS)
-   {
-       IX_ETH_ACC_WARNING_LOG("ixEthAccInit: Control plane interface lock initialization failed\n", 0, 0, 0, 0, 0, 0);
-
-       return IX_ETH_ACC_FAIL;
-   }
-
-   /* initialiasation is complete */
-   ixEthAccServiceInit = true;
-
-   return IX_ETH_ACC_SUCCESS;
-
-}
-
-PUBLIC void ixEthAccUnload(void)
-{
-    IxEthAccPortId portId;
-
-    if ( IX_ETH_ACC_IS_SERVICE_INITIALIZED() )
-    {
-       /* check none of the port is still active */
-       for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++)
-       {
-	   if ( IX_ETH_IS_PORT_INITIALIZED(portId) )
-	   {
-	       if (ixEthAccMacState[portId].portDisableState == ACTIVE)
-	       {
-		   IX_ETH_ACC_WARNING_LOG("ixEthAccUnload: port %u still active, bail out\n", portId, 0, 0, 0, 0, 0);
-		   return;
-	       }
-	   }
-       }
-
-       /* unmap the memory areas */
-       ixEthAccMiiUnload();
-       ixEthAccMacUnload();
-
-       /* set all ports as uninitialized */
-       for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++)
-       {
-	       ixEthAccPortData[portId].portInitialized = false;
-       }
-
-       /* uninitialize the service */
-       ixEthAccServiceInit = false;
-   }
-}
-
-PUBLIC IxEthAccStatus ixEthAccPortInit( IxEthAccPortId portId)
-{
-
-  IxEthAccStatus ret=IX_ETH_ACC_SUCCESS;
-
-   if ( ! IX_ETH_ACC_IS_SERVICE_INITIALIZED() )
-   {
-	return(IX_ETH_ACC_FAIL);
-   }
-
-   /*
-    * Check for valid port
-    */
-
-   if ( ! IX_ETH_ACC_IS_PORT_VALID(portId) )
-   {
-       return (IX_ETH_ACC_INVALID_PORT);
-   }
-
-   if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-   {
-       IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot initialize Eth port.\n",(INT32) portId,0,0,0,0,0);
-       return IX_ETH_ACC_SUCCESS ;
-   }
-
-   if ( IX_ETH_IS_PORT_INITIALIZED(portId) )
-   {
-	/* Already initialized */
-	return(IX_ETH_ACC_FAIL);
-   }
-
-   if(ixEthAccMacInit(portId)!=IX_ETH_ACC_SUCCESS)
-   {
-       return IX_ETH_ACC_FAIL;
-   }
-
-   /*
-     * Set the port init flag.
-     */
-
-    ixEthAccPortData[portId].portInitialized = true;
-
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-    /* init learning/filtering database structures for this port */
-    ixEthDBPortInit(portId);
-#endif
-
-    return(ret);
-}
-
-
diff --git a/drivers/net/npe/IxEthAccCommon.c b/drivers/net/npe/IxEthAccCommon.c
deleted file mode 100644
index 8249737..0000000
--- a/drivers/net/npe/IxEthAccCommon.c
+++ /dev/null
@@ -1,1025 +0,0 @@
-/**
- * @file IxEthAccCommon.c
- *
- * @author Intel Corporation
- * @date 12-Feb-2002
- *
- * @brief This file contains the implementation common support routines for the component
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/*
- * Component header files
- */
-
-#include "IxOsal.h"
-#include "IxEthAcc.h"
-#include "IxEthDB.h"
-#include "IxNpeMh.h"
-#include "IxEthDBPortDefs.h"
-#include "IxFeatureCtrl.h"
-#include "IxEthAcc_p.h"
-#include "IxEthAccQueueAssign_p.h"
-
-#include "IxEthAccDataPlane_p.h"
-#include "IxEthAccMii_p.h"
-
-/**
- * @addtogroup IxEthAccPri
- *@{
- */
-
-extern IxEthAccInfo   ixEthAccDataInfo;
-
-/**
- *
- * @brief Maximum number of RX queues set to be the maximum number
- * of traffic calsses.
- *
- */
-#define IX_ETHACC_MAX_RX_QUEUES \
-      (IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY \
-      - IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY \
-      + 1)
-
-/**
- *
- * @brief Maximum number of 128 entry RX queues
- *
- */
-#define IX_ETHACC_MAX_LARGE_RX_QUEUES 4
-
-/**
- *
- * @brief Data structure template for Default RX Queues
- *
- */
-IX_ETH_ACC_PRIVATE
-IxEthAccQregInfo ixEthAccQmgrRxDefaultTemplate =
-  {
-    IX_ETH_ACC_RX_FRAME_ETH_Q,	     /**< Queue ID */
-    "Eth Rx Q",
-    ixEthRxFrameQMCallback,          /**< Functional callback */
-    (IxQMgrCallbackId) 0,	     /**< Callback tag	      */
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    true,			     /**< Enable Q notification at startup */
-    IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback   */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL1,	     /**< Q High water mark - needed by NPE */
-  };
-
-/**
- *
- * @brief Data structure template for Small RX Queues
- *
- */
-IX_ETH_ACC_PRIVATE
-IxEthAccQregInfo ixEthAccQmgrRxSmallTemplate =
-  {
-    IX_ETH_ACC_RX_FRAME_ETH_Q,	     /**< Queue ID */
-    "Eth Rx Q",
-    ixEthRxFrameQMCallback,          /**< Functional callback */
-    (IxQMgrCallbackId) 0,	     /**< Callback tag	      */
-    IX_QMGR_Q_SIZE64,		     /**< Allocate Smaller Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    true,			     /**< Enable Q notification at startup */
-    IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback   */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL1,	     /**< Q High water mark - needed by NPE */
-  };
-
-
-/**
- *
- * @brief Data structure used to register & initialize the Queues
- *
- */
-IX_ETH_ACC_PRIVATE
-IxEthAccQregInfo ixEthAccQmgrStaticInfo[]=
-{
-  {
-    IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q,
-    "Eth Rx Fr Q 1",
-    ixEthRxFreeQMCallback,
-    (IxQMgrCallbackId) IX_ETH_PORT_1,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    false,			     /**< Disable Q notification at startup */
-    IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE, /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /***< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL64,	     /**< Q High water mark */
-  },
-
-  {
-    IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q,
-    "Eth Rx Fr Q 2",
-    ixEthRxFreeQMCallback,
-    (IxQMgrCallbackId) IX_ETH_PORT_2,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    false,			     /**< Disable Q notification at startup */
-    IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE,  /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL64,	     /**< Q High water mark */
-  },
-#ifdef __ixp46X
-  {
-    IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q,
-    "Eth Rx Fr Q 3",
-    ixEthRxFreeQMCallback,
-    (IxQMgrCallbackId) IX_ETH_PORT_3,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    false,			     /**< Disable Q notification at startup */
-    IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE,  /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL64,	     /**< Q High water mark */
-  },
-#endif
-  {
-     IX_ETH_ACC_TX_FRAME_ENET0_Q,
-    "Eth Tx Q 1",
-     ixEthTxFrameQMCallback,
-     (IxQMgrCallbackId) IX_ETH_PORT_1,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    false,			     /**< Disable Q notification at startup */
-    IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE,	 /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL64,	     /**< Q High water mark */
-  },
-
-  {
-     IX_ETH_ACC_TX_FRAME_ENET1_Q,
-    "Eth Tx Q 2",
-     ixEthTxFrameQMCallback,
-     (IxQMgrCallbackId) IX_ETH_PORT_2,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    false,			     /**< Disable Q notification at startup */
-    IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE,	     /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL64,	     /**< Q High water mark */
-  },
-#ifdef __ixp46X
-  {
-     IX_ETH_ACC_TX_FRAME_ENET2_Q,
-    "Eth Tx Q 3",
-     ixEthTxFrameQMCallback,
-     (IxQMgrCallbackId) IX_ETH_PORT_3,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /** Queue Entry Sizes - all Q entries are single ord entries   */
-    false,			     /** Disable Q notification at startup */
-    IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE,	     /** Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /* No queues use almost empty */
-    IX_QMGR_Q_WM_LEVEL64,	      /** Q High water mark - needed used  */
-  },
-#endif
-  {
-     IX_ETH_ACC_TX_FRAME_DONE_ETH_Q,
-    "Eth Tx Done Q",
-     ixEthTxFrameDoneQMCallback,
-     (IxQMgrCallbackId) 0,
-    IX_QMGR_Q_SIZE128,		     /**< Allocate Max Size Q */
-    IX_QMGR_Q_ENTRY_SIZE1,	     /**< Queue Entry Sizes - all Q entries are single word entries   */
-    true,			     /**< Enable Q notification at startup */
-    IX_ETH_ACC_TX_FRAME_DONE_ETH_Q_SOURCE, /**< Q Condition to drive callback  */
-    IX_QMGR_Q_WM_LEVEL0,	     /**< Q Low water mark */
-    IX_QMGR_Q_WM_LEVEL2,	     /**< Q High water mark - needed by NPE */
-  },
-
-  {  /* Null Termination entry
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  }
-
-};
-
-/**
- *
- * @brief Data structure used to register & initialize the Queues
- *
- * The structure will be filled at run time depending on the NPE
- * image already loaded and the QoS configured in ethDB.
- *
- */
-IX_ETH_ACC_PRIVATE
-IxEthAccQregInfo ixEthAccQmgrRxQueuesInfo[IX_ETHACC_MAX_RX_QUEUES+1]=
-{
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-      (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* PlaceHolder for rx queues
-      * depending on the QoS configured
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  },
-
-  {  /* Null Termination entry
-      */
-     (IxQMgrQId)0,
-     (char *) NULL,
-     (IxQMgrCallback) NULL,
-     (IxQMgrCallbackId) 0,
-     0,
-     0,
-     0,
-     0,
-     0,
-     0
-  }
-
-};
-
-/* forward declarations */
-IX_ETH_ACC_PRIVATE IxEthAccStatus
-ixEthAccQMgrQueueSetup(IxEthAccQregInfo *qInfoDes);
-
-/**
- * @fn ixEthAccQMgrQueueSetup(void)
- *
- * @brief Setup one queue and its event, and register the callback required
- * by this component to the QMgr
- *
- * @internal
- */
-IX_ETH_ACC_PRIVATE IxEthAccStatus
-ixEthAccQMgrQueueSetup(IxEthAccQregInfo *qInfoDes)
-{
-    /*
-     * Configure each Q.
-     */
-    if ( ixQMgrQConfig( qInfoDes->qName,
-			qInfoDes->qId,
-			qInfoDes->qSize,
-			qInfoDes->qWords) != IX_SUCCESS)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    if ( ixQMgrWatermarkSet( qInfoDes->qId,
-			     qInfoDes->AlmostEmptyThreshold,
-			     qInfoDes->AlmostFullThreshold
-			     ) != IX_SUCCESS)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /*
-     * Set dispatcher priority.
-     */
-    if ( ixQMgrDispatcherPrioritySet( qInfoDes->qId,
-				      IX_ETH_ACC_QM_QUEUE_DISPATCH_PRIORITY)
-	 != IX_SUCCESS)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /*
-     * Register callbacks for each Q.
-     */
-    if ( ixQMgrNotificationCallbackSet(qInfoDes->qId,
-				       qInfoDes->qCallback,
-				       qInfoDes->callbackTag)
-	 != IX_SUCCESS )
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /*
-     * Set notification condition for Q
-     */
-    if (qInfoDes->qNotificationEnableAtStartup == true)
-    {
-	if (   ixQMgrNotificationEnable(qInfoDes->qId,
-					qInfoDes->qConditionSource)
-	       != IX_SUCCESS )
-	{
-	    return IX_ETH_ACC_FAIL;
-	}
-    }
-
-    return(IX_ETH_ACC_SUCCESS);
-}
-
-/**
- * @fn ixEthAccQMgrQueuesConfig(void)
- *
- * @brief Setup all the queues and register all callbacks required
- * by this component to the QMgr
- *
- * The RxFree queues, tx queues, rx queues are configured statically
- *
- * Rx queues configuration is driven by QoS setup.
- * Many Rx queues may be required when QoS is enabled (this depends
- * on IxEthDB setup and the images being downloaded). The configuration
- * of the rxQueues is done in many steps as follows:
- *
- * @li select all Rx queues as configured by ethDB for all ports
- * @li sort the queues by traffic class
- * @li build the priority dependency for all queues
- * @li fill the configuration for all rx queues
- * @li configure all statically configured queues
- * @li configure all dynamically configured queues
- *
- * @param none
- *
- * @return IxEthAccStatus
- *
- * @internal
- */
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccQMgrQueuesConfig(void)
-{
-    struct
-    {
-	int npeCount;
-	UINT32 npeId;
-	IxQMgrQId qId;
-	IxEthDBProperty trafficClass;
-    } rxQueues[IX_ETHACC_MAX_RX_QUEUES];
-
-    UINT32 rxQueue = 0;
-    UINT32 rxQueueCount = 0;
-    IxQMgrQId ixQId =IX_QMGR_MAX_NUM_QUEUES;
-    IxEthDBStatus ixEthDBStatus = IX_ETH_DB_SUCCESS;
-    IxEthDBPortId ixEthDbPortId = 0;
-    IxEthAccPortId ixEthAccPortId = 0;
-    UINT32 ixNpeId = 0;
-    UINT32 ixHighestNpeId = 0;
-    UINT32 sortIterations = 0;
-    IxEthAccStatus ret = IX_ETH_ACC_SUCCESS;
-    IxEthAccQregInfo *qInfoDes = NULL;
-    IxEthDBProperty ixEthDBTrafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY;
-    IxEthDBPropertyType ixEthDBPropertyType = IX_ETH_DB_INTEGER_PROPERTY;
-    UINT32 ixEthDBParameter = 0;
-    BOOL completelySorted = false;
-
-    /* Fill the corspondance between ports and queues
-     * This defines the mapping from port to queue Ids.
-     */
-
-    ixEthAccPortData[IX_ETH_PORT_1].ixEthAccRxData.rxFreeQueue
-	= IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q;
-    ixEthAccPortData[IX_ETH_PORT_2].ixEthAccRxData.rxFreeQueue
-	= IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q;
-#ifdef __ixp46X
-    ixEthAccPortData[IX_ETH_PORT_3].ixEthAccRxData.rxFreeQueue
-	= IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q;
-#endif
-    ixEthAccPortData[IX_ETH_PORT_1].ixEthAccTxData.txQueue
-	= IX_ETH_ACC_TX_FRAME_ENET0_Q;
-    ixEthAccPortData[IX_ETH_PORT_2].ixEthAccTxData.txQueue
-	= IX_ETH_ACC_TX_FRAME_ENET1_Q;
-#ifdef __ixp46X
-    ixEthAccPortData[IX_ETH_PORT_3].ixEthAccTxData.txQueue
-	= IX_ETH_ACC_TX_FRAME_ENET2_Q;
-#endif
-    /* Fill the corspondance between ports and NPEs
-     * This defines the mapping from port to npeIds.
-     */
-
-    ixEthAccPortData[IX_ETH_PORT_1].npeId = IX_NPEMH_NPEID_NPEB;
-    ixEthAccPortData[IX_ETH_PORT_2].npeId = IX_NPEMH_NPEID_NPEC;
-#ifdef __ixp46X
-    ixEthAccPortData[IX_ETH_PORT_3].npeId = IX_NPEMH_NPEID_NPEA;
-#endif
-    /* set the default rx scheduling discipline */
-    ixEthAccDataInfo.schDiscipline = FIFO_NO_PRIORITY;
-
-    /*
-     * Queue Selection step:
-     *
-     * The following code selects all the queues and build
-     * a temporary array which contains for each queue
-     * - the queue Id,
-     * - the highest traffic class (in case of many
-     * priorities configured for the same queue on different
-     * ports)
-     * - the number of different Npes which are
-     * configured to write to this queue.
-     *
-     * The output of this loop is a temporary array of RX queues
-     * in any order.
-     *
-     */
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-    for (ixEthAccPortId = 0;
-	 (ixEthAccPortId < IX_ETH_ACC_NUMBER_OF_PORTS)
-	     && (ret == IX_ETH_ACC_SUCCESS);
-	 ixEthAccPortId++)
-    {
-	/* map between ethDb and ethAcc port Ids */
-	ixEthDbPortId = (IxEthDBPortId)ixEthAccPortId;
-
-	/* map between npeId and ethAcc port Ids */
-	ixNpeId = IX_ETH_ACC_PORT_TO_NPE_ID(ixEthAccPortId);
-
-	/* Iterate thru the different priorities */
-	for (ixEthDBTrafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY;
-	     ixEthDBTrafficClass <= IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY;
-	     ixEthDBTrafficClass++)
-	{
-	    ixEthDBStatus = ixEthDBFeaturePropertyGet(
-	      ixEthDbPortId,
-	      IX_ETH_DB_VLAN_QOS,
-	      ixEthDBTrafficClass,
-	      &ixEthDBPropertyType,
-	      (void *)&ixEthDBParameter);
-
-	    if (ixEthDBStatus == IX_ETH_DB_SUCCESS)
-	    {
-		/* This port and QoS class are mapped to
-		 * a RX queue.
-		 */
-		if (ixEthDBPropertyType == IX_ETH_DB_INTEGER_PROPERTY)
-		{
-		    /* remember the highest npe Id supporting ethernet */
-		    if (ixNpeId > ixHighestNpeId)
-		    {
-			ixHighestNpeId = ixNpeId;
-		    }
-
-		    /* search the queue in the list of queues
-		     * already used by an other port or QoS
-		     */
-		    for (rxQueue = 0;
-			 rxQueue < rxQueueCount;
-			 rxQueue++)
-		    {
-			if (rxQueues[rxQueue].qId == (IxQMgrQId)ixEthDBParameter)
-			{
-			    /* found an existing setup, update the number of ports
-			     * for this queue if the port maps to
-			     * a different NPE.
-			     */
-			    if (rxQueues[rxQueue].npeId != ixNpeId)
-			    {
-				rxQueues[rxQueue].npeCount++;
-				rxQueues[rxQueue].npeId = ixNpeId;
-			    }
-			    /* get the highest traffic class for this queue */
-			    if (rxQueues[rxQueue].trafficClass > ixEthDBTrafficClass)
-			    {
-				rxQueues[rxQueue].trafficClass = ixEthDBTrafficClass;
-			    }
-			    break;
-			}
-		    }
-		    if (rxQueue == rxQueueCount)
-		    {
-			/* new queue not found in the current list,
-			 * add a new entry.
-			 */
-			IX_OSAL_ASSERT(rxQueueCount < IX_ETHACC_MAX_RX_QUEUES);
-			rxQueues[rxQueueCount].qId = ixEthDBParameter;
-			rxQueues[rxQueueCount].npeCount = 1;
-			rxQueues[rxQueueCount].npeId = ixNpeId;
-			rxQueues[rxQueueCount].trafficClass = ixEthDBTrafficClass;
-			rxQueueCount++;
-		    }
-		}
-		else
-		{
-		    /* unexpected property type (not Integer) */
-		    ret = IX_ETH_ACC_FAIL;
-
-                    IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: unexpected property type returned by EthDB\n", 0, 0, 0, 0, 0, 0);
-
-		    /* no point to continue to iterate */
-		    break;
-		}
-	    }
-	    else
-	    {
-		/* No Rx queue configured for this port
-		 * and this traffic class. Do nothing.
-		 */
-	    }
-	}
-
-        /* notify EthDB that queue initialization is complete and traffic class allocation is frozen */
-        ixEthDBFeaturePropertySet(ixEthDbPortId,
-            IX_ETH_DB_VLAN_QOS,
-            IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE,
-            NULL /* ignored */);
-    }
-
-#else
-
-    ixNpeId = IX_ETH_ACC_PORT_TO_NPE_ID(ixEthAccPortId);
-    rxQueues[0].qId = 4;
-    rxQueues[0].npeCount = 1;
-    rxQueues[0].npeId = ixNpeId;
-    rxQueues[0].trafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY;
-    rxQueueCount++;
-
-#endif
-
-    /* check there is at least 1 rx queue : there is no point
-     * to continue if there is no rx queue configured
-     */
-    if ((rxQueueCount == 0) || (ret == IX_ETH_ACC_FAIL))
-    {
-        IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: no queues configured, bailing out\n", 0, 0, 0, 0, 0, 0);
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    /* Queue sort step:
-     *
-     * Re-order the array of queues by decreasing traffic class
-     * using a bubble sort. (trafficClass 0 is the lowest
-     * priority traffic, trafficClass 7 is the highest priority traffic)
-     *
-     * Primary sort order is traffic class
-     * Secondary sort order is npeId
-     *
-     * Note that a bubble sort algorithm is not very efficient when
-     * the number of queues grows . However, this is not a very bad choice
-     * considering the very small number of entries to sort. Also, bubble
-     * sort is extremely fast when the list is already sorted.
-     *
-     * The output of this loop is a sorted array of queues.
-     *
-     */
-    sortIterations = 0;
-    do
-    {
-	sortIterations++;
-	completelySorted = true;
-	for (rxQueue = 0;
-	     rxQueue < rxQueueCount - sortIterations;
-	     rxQueue++)
-	{
-	    /* compare adjacent elements */
-	    if ((rxQueues[rxQueue].trafficClass <
-		rxQueues[rxQueue+1].trafficClass)
-		|| ((rxQueues[rxQueue].trafficClass ==
-		     rxQueues[rxQueue+1].trafficClass)
-		    &&(rxQueues[rxQueue].npeId <
-		       rxQueues[rxQueue+1].npeId)))
-	    {
-		/* swap adjacent elements */
-		int npeCount = rxQueues[rxQueue].npeCount;
-		UINT32 npeId = rxQueues[rxQueue].npeId;
-		IxQMgrQId qId = rxQueues[rxQueue].qId;
-		IxEthDBProperty trafficClass = rxQueues[rxQueue].trafficClass;
-		rxQueues[rxQueue].npeCount = rxQueues[rxQueue+1].npeCount;
-		rxQueues[rxQueue].npeId = rxQueues[rxQueue+1].npeId;
-		rxQueues[rxQueue].qId = rxQueues[rxQueue+1].qId;
-		rxQueues[rxQueue].trafficClass = rxQueues[rxQueue+1].trafficClass;
-		rxQueues[rxQueue+1].npeCount = npeCount;
-		rxQueues[rxQueue+1].npeId = npeId;
-		rxQueues[rxQueue+1].qId = qId;
-		rxQueues[rxQueue+1].trafficClass = trafficClass;
-		completelySorted = false;
-	    }
-	}
-    }
-    while (!completelySorted);
-
-    /* Queue traffic class list:
-     *
-     * Fill an array of rx queues linked by ascending traffic classes.
-     *
-     * If the queues are configured as follows
-     *   qId 6 -> traffic class 0 (lowest)
-     *   qId 7 -> traffic class 0
-     *   qId 8 -> traffic class 6
-     *   qId 12 -> traffic class 7 (highest)
-     *
-     * Then the output of this loop will be
-     *
-     * higherPriorityQueue[6] = 8
-     * higherPriorityQueue[7] = 8
-     * higherPriorityQueue[8] = 12
-     * higherPriorityQueue[12] = Invalid queueId
-     * higherPriorityQueue[...] = Invalid queueId
-     *
-     * Note that this queue ordering does not handle all possibilities
-     * that could result from different rules associated with different
-     * ports, and inconsistencies in the rules. In all cases, the
-     * output of this  algorithm is a simple linked list of queues,
-     * without closed circuit.
-
-     * This list is implemented as an array with invalid values initialized
-     * with an "invalid" queue id which is the maximum number of queues.
-     *
-     */
-
-    /*
-     * Initialise the rx queue list.
-     */
-    for (rxQueue = 0; rxQueue < IX_QMGR_MAX_NUM_QUEUES; rxQueue++)
-    {
-	ixEthAccDataInfo.higherPriorityQueue[rxQueue] = IX_QMGR_MAX_NUM_QUEUES;
-    }
-
-    /* build the linked list for this NPE.
-     */
-    for (ixNpeId = 0;
-	 ixNpeId <= ixHighestNpeId;
-	 ixNpeId++)
-    {
-	/* iterate thru the sorted list of queues
-	 */
-	ixQId = IX_QMGR_MAX_NUM_QUEUES;
-	for (rxQueue = 0;
-	     rxQueue < rxQueueCount;
-	     rxQueue++)
-	{
-	    if (rxQueues[rxQueue].npeId == ixNpeId)
-	    {
-		ixEthAccDataInfo.higherPriorityQueue[rxQueues[rxQueue].qId] = ixQId;
-		/* iterate thru queues with the same traffic class
-		 * than the current queue. (queues are ordered by descending
-		 * traffic classes and npeIds).
-		 */
-		while ((rxQueue < rxQueueCount - 1)
-		       && (rxQueues[rxQueue].trafficClass
-			   == rxQueues[rxQueue+1].trafficClass)
-		       && (ixNpeId == rxQueues[rxQueue].npeId))
-		{
-		    rxQueue++;
-		    ixEthAccDataInfo.higherPriorityQueue[rxQueues[rxQueue].qId] = ixQId;
-		}
-		ixQId = rxQueues[rxQueue].qId;
-	    }
-	}
-    }
-
-    /* point on the first dynamic queue description */
-    qInfoDes = ixEthAccQmgrRxQueuesInfo;
-
-    /* update the list of queues with the rx queues */
-    for (rxQueue = 0;
-	 (rxQueue < rxQueueCount) && (ret == IX_ETH_ACC_SUCCESS);
-	 rxQueue++)
-    {
-	/* Don't utilize more than IX_ETHACC_MAX_LARGE_RX_QUEUES queues
-	 * with the full 128 entries.  For the lower priority queues, use
-	 * a smaller number of entries.  This ensures queue resources
-	 * remain available for other components.
-	 */
-	if( (rxQueueCount > IX_ETHACC_MAX_LARGE_RX_QUEUES) &&
-	    (rxQueue < rxQueueCount - IX_ETHACC_MAX_LARGE_RX_QUEUES) )
-	{
-	    /* add the small RX Queue setup template to the list of queues */
-	    memcpy(qInfoDes, &ixEthAccQmgrRxSmallTemplate, sizeof(*qInfoDes));
-	} else {
-	    /* add the default RX Queue setup template to the list of queues */
-	    memcpy(qInfoDes, &ixEthAccQmgrRxDefaultTemplate, sizeof(*qInfoDes));
-	}
-
-	/* setup the RxQueue ID */
-	qInfoDes->qId = rxQueues[rxQueue].qId;
-
-	/* setup the RxQueue watermark level
-	 *
-	 * Each queue can be filled by many NPEs. To avoid the
-	 * NPEs to write to a full queue, need to set the
-	 * high watermark level for nearly full condition.
-	 * (the high watermark level are a power of 2
-	 * starting from the top of the queue)
-	 *
-	 * Number of     watermark
-         *   ports        level
-         *    1             0
-	 *    2             1
-	 *    3             2
-	 *    4             4
-	 *    5             4
-	 *    6             8
-	 *    n          approx. 2**ceil(log2(n))
-	 */
-	if (rxQueues[rxQueue].npeCount == 1)
-	{
-	    qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL0;
-	}
-	else if (rxQueues[rxQueue].npeCount == 2)
-	{
-	    qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL1;
-	}
-	else if (rxQueues[rxQueue].npeCount == 3)
-	{
-	    qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL2;
-	}
-	else
-	{
-	    /* reach the maximum number for CSR 2.0 */
-            IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: maximum number of NPEs per queue reached, bailing out\n", 0, 0, 0, 0, 0, 0);
-	    ret = IX_ETH_ACC_FAIL;
-	    break;
-	}
-
-	/* move to next queue entry */
-	++qInfoDes;
-    }
-
-    /* configure the static list (RxFree, Tx and TxDone queues) */
-    for (qInfoDes = ixEthAccQmgrStaticInfo;
-	 (qInfoDes->qCallback != (IxQMgrCallback) NULL )
-	     && (ret == IX_ETH_ACC_SUCCESS);
-	 ++qInfoDes)
-    {
-	ret = ixEthAccQMgrQueueSetup(qInfoDes);
-    }
-
-    /* configure the dynamic list (Rx queues) */
-    for (qInfoDes = ixEthAccQmgrRxQueuesInfo;
-	 (qInfoDes->qCallback != (IxQMgrCallback) NULL )
-	     && (ret == IX_ETH_ACC_SUCCESS);
-	 ++qInfoDes)
-    {
-	ret = ixEthAccQMgrQueueSetup(qInfoDes);
-    }
-
-    return(ret);
-}
-
-/**
- * @fn ixEthAccQMgrRxQEntryGet(UINT32 *rxQueueEntries)
- *
- * @brief Add and return the total number of entries in all Rx queues
- *
- * @param UINT32 rxQueueEntries[in] number of entries in all queues
- *
- * @return void
- *
- * @note Rx queues configuration is driven by Qos Setup. There is a
- * variable number of rx queues which are set at initialisation.
- *
- * @internal
- */
-IX_ETH_ACC_PUBLIC
-void ixEthAccQMgrRxQEntryGet(UINT32 *numRxQueueEntries)
-{
-    UINT32 rxQueueLevel;
-    IxEthAccQregInfo *qInfoDes;;
-
-    *numRxQueueEntries = 0;
-
-    /* iterate thru rx queues */
-    for (qInfoDes = ixEthAccQmgrRxQueuesInfo;
-	 qInfoDes->qCallback != (IxQMgrCallback)NULL;
-	 ++qInfoDes)
-    {
-	/* retrieve the rx queue level */
-	rxQueueLevel = 0;
-	ixQMgrQNumEntriesGet(qInfoDes->qId, &rxQueueLevel);
-	(*numRxQueueEntries) += rxQueueLevel;
-    }
-}
-
-/**
- * @fn ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback)
- *
- * @brief Change the callback registered to all rx queues.
- *
- * @param IxQMgrCallback ixQMgrCallback[in] QMgr callback to register
- *
- * @return IxEthAccStatus
- *
- * @note The user may decide to use different Rx mechanisms
- * (e.g. receive many frames at the same time , or receive
- *  one frame at a time, depending on the overall application
- *  performances). A different QMgr callback is registered. This
- *  way, there is no excessive pointer checks in the datapath.
- *
- * @internal
- */
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback)
-{
-    IxEthAccQregInfo *qInfoDes;
-    IxEthAccStatus ret = IX_ETH_ACC_SUCCESS;
-
-    /* parameter check */
-    if (NULL == ixQMgrCallback)
-    {
-	ret = IX_ETH_ACC_FAIL;
-    }
-
-    /* iterate thru rx queues */
-    for (qInfoDes = ixEthAccQmgrRxQueuesInfo;
-	 (qInfoDes->qCallback != (IxQMgrCallback) NULL )
-	     && (ret == IX_ETH_ACC_SUCCESS);
-	 ++qInfoDes)
-    {
-	/* register the rx callback for all queues */
-	if (ixQMgrNotificationCallbackSet(qInfoDes->qId,
-					     ixQMgrCallback,
-					     qInfoDes->callbackTag
-					     ) != IX_SUCCESS)
-	{
-	    ret = IX_ETH_ACC_FAIL;
-	}
-    }
-    return(ret);
-}
-
-/**
- * @fn ixEthAccSingleEthNpeCheck(IxEthAccPortId portId)
- *
- * @brief Check the npe exists for this port
- *
- * @param IxEthAccPortId portId[in] port
- *
- * @return IxEthAccStatus
- *
- * @internal
- */
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccSingleEthNpeCheck(IxEthAccPortId portId)
-{
-
-    /* If not IXP42X A0 stepping, proceed to check for existence of coprocessors */
-    if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 !=
-        (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-        || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-      {
-            if ((IX_ETH_PORT_1 == portId) &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) ==
-                 IX_FEATURE_CTRL_COMPONENT_ENABLED))
-            {
-                return IX_ETH_ACC_SUCCESS;
-            }
-
-            if ((IX_ETH_PORT_2 == portId) &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) ==
-                 IX_FEATURE_CTRL_COMPONENT_ENABLED))
-            {
-                return IX_ETH_ACC_SUCCESS;
-            }
-
-            if ((IX_ETH_PORT_3 == portId) &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA_ETH) ==
-                 IX_FEATURE_CTRL_COMPONENT_ENABLED))
-            {
-                return IX_ETH_ACC_SUCCESS;
-            }
-
-            return IX_ETH_ACC_FAIL;
-      }
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-/**
- * @fn ixEthAccStatsShow(void)
- *
- * @brief Displays all EthAcc stats
- *
- * @return void
- *
- */
-void ixEthAccStatsShow(IxEthAccPortId portId)
-{
-    ixEthAccMdioShow();
-
-    printf("\nPort %u\nUnicast MAC : ", portId);
-    ixEthAccPortUnicastAddressShow(portId);
-    ixEthAccPortMulticastAddressShow(portId);
-    printf("\n");
-
-    ixEthAccDataPlaneShow();
-}
-
-
-
diff --git a/drivers/net/npe/IxEthAccControlInterface.c b/drivers/net/npe/IxEthAccControlInterface.c
deleted file mode 100644
index dbe32e1..0000000
--- a/drivers/net/npe/IxEthAccControlInterface.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/**
- * @file IxEthAccControlInterface.c
- *
- * @author Intel Corporation
- * @date 
- *
- * @brief IX_ETH_ACC_PUBLIC wrappers for control plane functions
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxOsal.h"
-#include "IxEthAcc.h"
-#include "IxEthAcc_p.h"
-
-PUBLIC IxOsalMutex ixEthAccControlInterfaceMutex;
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortEnable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-        printf("EthAcc: (Mac) cannot enable port %d, service not initialized\n", portId);
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortEnablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortDisable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    /* check the context is iinitialized */
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortDisablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortEnabledQueryPriv(portId, enabled);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortPromiscuousModeClearPriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortPromiscuousModeSetPriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortUnicastMacAddressSet(IxEthAccPortId portId, IxEthAccMacAddr *macAddr)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortUnicastMacAddressSetPriv(portId, macAddr);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortUnicastMacAddressGet(IxEthAccPortId portId, IxEthAccMacAddr *macAddr)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortUnicastMacAddressGetPriv(portId, macAddr);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressJoin(IxEthAccPortId portId, IxEthAccMacAddr *macAddr)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortMulticastAddressJoinPriv(portId, macAddr);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressJoinAll(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortMulticastAddressJoinAllPriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressLeave(IxEthAccPortId portId, IxEthAccMacAddr *macAddr)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortMulticastAddressLeavePriv(portId, macAddr);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressLeaveAll(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortMulticastAddressLeaveAllPriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortUnicastAddressShow(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
- 
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortUnicastAddressShowPriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC void 
-ixEthAccPortMulticastAddressShow(IxEthAccPortId portId)
-{
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return;
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    ixEthAccPortMulticastAddressShowPriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortDuplexModeSet(IxEthAccPortId portId, IxEthAccDuplexMode mode)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortDuplexModeSetPriv(portId, mode);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortDuplexModeGet(IxEthAccPortId portId, IxEthAccDuplexMode *mode)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortDuplexModeGetPriv(portId, mode);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendPaddingEnable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-     
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortTxFrameAppendPaddingEnablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendPaddingDisable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortTxFrameAppendPaddingDisablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendFCSEnable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortTxFrameAppendFCSEnablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendFCSDisable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortTxFrameAppendFCSDisablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortRxFrameAppendFCSEnable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortRxFrameAppendFCSEnablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccPortRxFrameAppendFCSDisable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortRxFrameAppendFCSDisablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccTxSchedulingDisciplineSet(IxEthAccPortId portId, IxEthAccSchedulerDiscipline sched)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccTxSchedulingDisciplineSetPriv(portId, sched);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus
-ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccRxSchedulingDisciplineSetPriv(sched);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortNpeLoopbackEnable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccNpeLoopbackEnablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortTxEnable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortTxEnablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortRxEnable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortRxEnablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccNpeLoopbackDisablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortTxDisable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortTxDisablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortRxDisable(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortRxDisablePriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus 
-ixEthAccPortMacReset(IxEthAccPortId portId)
-{
-    IxEthAccStatus result;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER);
-    result = ixEthAccPortMacResetPriv(portId);
-    ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex);
-    return result;
-}
diff --git a/drivers/net/npe/IxEthAccDataPlane.c b/drivers/net/npe/IxEthAccDataPlane.c
deleted file mode 100644
index c0b82d9..0000000
--- a/drivers/net/npe/IxEthAccDataPlane.c
+++ /dev/null
@@ -1,2459 +0,0 @@
-/**
- * @file IxEthDataPlane.c
- *
- * @author Intel Corporation
- * @date 12-Feb-2002
- *
- * @brief This file contains the implementation of the IXPxxx
- * Ethernet Access Data plane component
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxNpeMh.h"
-#include "IxEthAcc.h"
-#include "IxEthDB.h"
-#include "IxOsal.h"
-#include "IxEthDBPortDefs.h"
-#include "IxFeatureCtrl.h"
-#include "IxEthAcc_p.h"
-#include "IxEthAccQueueAssign_p.h"
-
-extern PUBLIC IxEthAccMacState ixEthAccMacState[];
-extern PUBLIC UINT32 ixEthAccNewSrcMask;
-
-/**
- * private functions prototype
- */
-PRIVATE IX_OSAL_MBUF *
-ixEthAccEntryFromQConvert(UINT32 qEntry, UINT32 mask);
-
-PRIVATE UINT32
-ixEthAccMbufRxQPrepare(IX_OSAL_MBUF *mbuf);
-
-PRIVATE UINT32
-ixEthAccMbufTxQPrepare(IX_OSAL_MBUF *mbuf);
-
-PRIVATE IxEthAccStatus
-ixEthAccTxSwQHighestPriorityGet(IxEthAccPortId portId,
-				IxEthAccTxPriority *priorityPtr);
-
-PRIVATE IxEthAccStatus
-ixEthAccTxFromSwQ(IxEthAccPortId portId,
-		  IxEthAccTxPriority priority);
-
-PRIVATE IxEthAccStatus
-ixEthAccRxFreeFromSwQ(IxEthAccPortId portId);
-
-PRIVATE void
-ixEthAccMbufFromTxQ(IX_OSAL_MBUF *mbuf);
-
-PRIVATE void
-ixEthAccMbufFromRxQ(IX_OSAL_MBUF *mbuf);
-
-PRIVATE IX_STATUS
-ixEthAccQmgrLockTxWrite(IxEthAccPortId portId,
-			UINT32 qBuffer);
-
-PRIVATE IX_STATUS
-ixEthAccQmgrLockRxWrite(IxEthAccPortId portId,
-			UINT32 qBuffer);
-
-PRIVATE IX_STATUS
-ixEthAccQmgrTxWrite(IxEthAccPortId portId,
-		    UINT32 qBuffer,
-		    UINT32 priority);
-
-/**
- * @addtogroup IxEthAccPri
- *@{
- */
-
-/* increment a counter only when stats are enabled */
-#define TX_STATS_INC(port,field) \
-        IX_ETH_ACC_STATS_INC(ixEthAccPortData[port].ixEthAccTxData.stats.field)
-#define RX_STATS_INC(port,field) \
-        IX_ETH_ACC_STATS_INC(ixEthAccPortData[port].ixEthAccRxData.stats.field)
-
-/* always increment the counter (mainly used for unexpected errors) */
-#define TX_INC(port,field) \
-        ixEthAccPortData[port].ixEthAccTxData.stats.field++
-#define RX_INC(port,field) \
-        ixEthAccPortData[port].ixEthAccRxData.stats.field++
-
-PRIVATE IxEthAccDataPlaneStats     ixEthAccDataStats;
-
-extern IxEthAccPortDataInfo   ixEthAccPortData[];
-extern IxEthAccInfo   ixEthAccDataInfo;
-
-PRIVATE IxOsalFastMutex txWriteMutex[IX_ETH_ACC_NUMBER_OF_PORTS];
-PRIVATE IxOsalFastMutex rxWriteMutex[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-/**
- *
- * @brief Mbuf header conversion macros : they implement the
- *  different conversions using a temporary value. They also double-check
- *  that the parameters can be converted to/from NPE format.
- *
- */
-#if defined(__wince) && !defined(IN_KERNEL)
-#define PTR_VIRT2NPE(ptrSrc,dst) \
-  do { UINT32 temp; \
-      IX_OSAL_ENSURE(sizeof(ptrSrc) == sizeof(UINT32), "Wrong parameter type"); \
-      IX_OSAL_ENSURE(sizeof(dst) == sizeof(UINT32), "Wrong parameter type"); \
-      temp = (UINT32)IX_OSAL_MBUF_MBUF_VIRTUAL_TO_PHYSICAL_TRANSLATION((IX_OSAL_MBUF*)ptrSrc); \
-      (dst) = IX_OSAL_SWAP_BE_SHARED_LONG(temp); } \
-  while(0)
-
-#define PTR_NPE2VIRT(type,src,ptrDst) \
-  do { void *temp; \
-      IX_OSAL_ENSURE(sizeof(type) == sizeof(UINT32), "Wrong parameter type"); \
-      IX_OSAL_ENSURE(sizeof(src) == sizeof(UINT32), "Wrong parameter type"); \
-      IX_OSAL_ENSURE(sizeof(ptrDst) == sizeof(UINT32), "Wrong parameter type"); \
-      temp = (void *)IX_OSAL_SWAP_BE_SHARED_LONG(src); \
-      (ptrDst) = (type)IX_OSAL_MBUF_MBUF_PHYSICAL_TO_VIRTUAL_TRANSLATION(temp); } \
-  while(0)
-#else
-#define PTR_VIRT2NPE(ptrSrc,dst) \
-  do { UINT32 temp; \
-      IX_OSAL_ENSURE(sizeof(ptrSrc) == sizeof(UINT32), "Wrong parameter type"); \
-      IX_OSAL_ENSURE(sizeof(dst) == sizeof(UINT32), "Wrong parameter type"); \
-      temp = (UINT32)IX_OSAL_MMU_VIRT_TO_PHYS(ptrSrc); \
-      (dst) = IX_OSAL_SWAP_BE_SHARED_LONG(temp); } \
-  while(0)
-
-#define PTR_NPE2VIRT(type,src,ptrDst) \
-  do { void *temp; \
-      IX_OSAL_ENSURE(sizeof(type) == sizeof(UINT32), "Wrong parameter type"); \
-      IX_OSAL_ENSURE(sizeof(src) == sizeof(UINT32), "Wrong parameter type"); \
-      IX_OSAL_ENSURE(sizeof(ptrDst) == sizeof(UINT32), "Wrong parameter type"); \
-      temp = (void *)IX_OSAL_SWAP_BE_SHARED_LONG(src); \
-      (ptrDst) = (type)IX_OSAL_MMU_PHYS_TO_VIRT(temp); } \
-  while(0)
-#endif
-
-/**
- *
- * @brief Mbuf payload pointer conversion macros : Wince has its own
- *  method to convert the buffer pointers
- */
-#if defined(__wince) && !defined(IN_KERNEL)
-#define DATAPTR_VIRT2NPE(ptrSrc,dst) \
-  do { UINT32 temp; \
-      temp = (UINT32)IX_OSAL_MBUF_DATA_VIRTUAL_TO_PHYSICAL_TRANSLATION(ptrSrc); \
-      (dst) = IX_OSAL_SWAP_BE_SHARED_LONG(temp); } \
-  while(0)
-
-#else
-#define DATAPTR_VIRT2NPE(ptrSrc,dst) PTR_VIRT2NPE(IX_OSAL_MBUF_MDATA(ptrSrc),dst)
-#endif
-
-
-/* Flush the shared part of the mbuf header */
-#define IX_ETHACC_NE_CACHE_FLUSH(mbufPtr) \
-  do { \
-      IX_OSAL_CACHE_FLUSH(IX_ETHACC_NE_SHARED(mbufPtr), \
-			      sizeof(IxEthAccNe)); \
-    } \
-  while(0)
-
-/* Invalidate the shared part of the mbuf header */
-#define IX_ETHACC_NE_CACHE_INVALIDATE(mbufPtr) \
-  do { \
-      IX_OSAL_CACHE_INVALIDATE(IX_ETHACC_NE_SHARED(mbufPtr), \
-				   sizeof(IxEthAccNe)); \
-    } \
-  while(0)
-
-/* Preload one cache line (shared mbuf headers are aligned
- * and their size is 1 cache line)
- *
- * IX_OSAL_CACHED  is defined when the mbuf headers are
- * allocated from cached memory.
- *
- * Other processor on emulation environment may not implement
- * preload function
- */
-#ifdef IX_OSAL_CACHED
-	#if (CPU!=SIMSPARCSOLARIS) && !defined (__wince)
-		#define IX_ACC_DATA_CACHE_PRELOAD(ptr) \
-		do { /* preload a cache line (Xscale Processor) */ \
-			__asm__ (" pld [%0]\n": : "r" (ptr)); \
-		} \
-		while(0)
-	#else
-		/* preload not implemented on different processor */
-		#define IX_ACC_DATA_CACHE_PRELOAD(mbufPtr) \
-		do { /* nothing */ } while (0)
-	#endif
-#else
-	/* preload not needed if cache is not enabled */
-	#define IX_ACC_DATA_CACHE_PRELOAD(mbufPtr) \
-	do { /* nothing */ } while (0)
-#endif
-
-/**
- *
- * @brief function to retrieve the correct pointer from
- * a queue entry posted by the NPE
- *
- * @param qEntry : entry from qmgr queue
- *        mask : applicable mask for this queue
- *        (4 most significant bits are used for additional informations)
- *
- * @return IX_OSAL_MBUF * pointer to mbuf header
- *
- * @internal
- */
-PRIVATE IX_OSAL_MBUF *
-ixEthAccEntryFromQConvert(UINT32 qEntry, UINT32 mask)
-{
-    IX_OSAL_MBUF *mbufPtr;
-
-    if (qEntry != 0)
-    {
-        /* mask NPE bits (e.g. priority, port ...) */
-        qEntry &= mask;
-
-#if IX_ACC_DRAM_PHYS_OFFSET != 0
-        /* restore the original address pointer (if PHYS_OFFSET is not 0) */
-        qEntry |= (IX_ACC_DRAM_PHYS_OFFSET & ~IX_ETHNPE_QM_Q_RXENET_ADDR_MASK);
-#endif
-        /* get the mbuf pointer address from the npe-shared address */
-        qEntry -= offsetof(IX_OSAL_MBUF,ix_ne);
-
-        /* phys2virt mbuf */
-        mbufPtr = (IX_OSAL_MBUF *)IX_OSAL_MMU_PHYS_TO_VIRT(qEntry);
-
-        /* preload the cacheline shared with NPE */
-        IX_ACC_DATA_CACHE_PRELOAD(IX_ETHACC_NE_SHARED(mbufPtr));
-
-        /* preload the cacheline used by xscale */
-        IX_ACC_DATA_CACHE_PRELOAD(mbufPtr);
-    }
-    else
-    {
-	mbufPtr = NULL;
-    }
-
-    return mbufPtr;
-}
-
-/* Convert the mbuf header for NPE transmission */
-PRIVATE UINT32
-ixEthAccMbufTxQPrepare(IX_OSAL_MBUF *mbuf)
-{
-    UINT32 qbuf;
-    UINT32 len;
-
-    /* endianess swap for tci and flags
-       note: this is done only once, even for chained buffers */
-    IX_ETHACC_NE_FLAGS(mbuf)   = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_FLAGS(mbuf));
-    IX_ETHACC_NE_VLANTCI(mbuf) = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_VLANTCI(mbuf));
-
-    /* test for unchained mbufs */
-    if (IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mbuf) == NULL)
-    {
-	/* "best case" scenario : unchained mbufs */
-	IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedTxMBufs);
-
-	/* payload pointer conversion */
-	DATAPTR_VIRT2NPE(mbuf, IX_ETHACC_NE_DATA(mbuf));
-
-	/* unchained mbufs : the frame length is the mbuf length
-	 * and the 2 identical lengths are stored in the same
-	 * word.
-	 */
-	len = IX_OSAL_MBUF_MLEN(mbuf);
-
-	/* set the length in both length and pktLen 16-bits fields */
-	len |= (len << IX_ETHNPE_ACC_LENGTH_OFFSET);
-	IX_ETHACC_NE_LEN(mbuf) = IX_OSAL_SWAP_BE_SHARED_LONG(len);
-
-	/* unchained mbufs : next contains 0 */
-	IX_ETHACC_NE_NEXT(mbuf) = 0;
-
-	/* flush shared header after all address conversions */
-	IX_ETHACC_NE_CACHE_FLUSH(mbuf);
-    }
-    else
-    {
-	/* chained mbufs */
-	IX_OSAL_MBUF *ptr = mbuf;
-	IX_OSAL_MBUF *nextPtr;
-	UINT32 frmLen;
-
-	/* get the frame length from the header of the first buffer */
-	frmLen = IX_OSAL_MBUF_PKT_LEN(mbuf);
-
-	do
-	{
-	    IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedTxMBufs);
-
-	    /* payload pointer */
-	    DATAPTR_VIRT2NPE(ptr,IX_ETHACC_NE_DATA(ptr));
-	    /* Buffer length and frame length are stored in the same word */
-	    len = IX_OSAL_MBUF_MLEN(ptr);
-	    len = frmLen | (len << IX_ETHNPE_ACC_LENGTH_OFFSET);
-	    IX_ETHACC_NE_LEN(ptr) = IX_OSAL_SWAP_BE_SHARED_LONG(len);
-
-	    /* get the virtual next chain pointer */
-	    nextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr);
-	    if (nextPtr != NULL)
-	    {
-		/* shared pointer of the next buffer is chained */
-		PTR_VIRT2NPE(IX_ETHACC_NE_SHARED(nextPtr),
-			     IX_ETHACC_NE_NEXT(ptr));
-	    }
-	    else
-	    {
-		IX_ETHACC_NE_NEXT(ptr) = 0;
-	    }
-
-	    /* flush shared header after all address conversions */
-	    IX_ETHACC_NE_CACHE_FLUSH(ptr);
-
-	    /* move to next buffer */
-	    ptr = nextPtr;
-
-	    /* the frame length field is set only in the first buffer
-	     * and is zeroed in the next buffers
-	     */
-	    frmLen = 0;
-	}
-	while(ptr != NULL);
-
-    }
-
-    /* virt2phys mbuf itself */
-    qbuf = (UINT32)IX_OSAL_MMU_VIRT_TO_PHYS(
-		  IX_ETHACC_NE_SHARED(mbuf));
-
-    /* Ensure the bits which are reserved to exchange information with
-     * the NPE are cleared
-     *
-     * If the mbuf address is not correctly aligned, or from an
-     * incompatible memory range, there is no point to continue
-     */
-    IX_OSAL_ENSURE(((qbuf & ~IX_ETHNPE_QM_Q_TXENET_ADDR_MASK) == 0),
-	      "Invalid address range");
-
-    return qbuf;
-}
-
-/* Convert the mbuf header for NPE reception */
-PRIVATE UINT32
-ixEthAccMbufRxQPrepare(IX_OSAL_MBUF *mbuf)
-{
-    UINT32 len;
-    UINT32 qbuf;
-
-    if (IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mbuf) == NULL)
-    {
-	/* "best case" scenario : unchained mbufs */
-	IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedRxFreeMBufs);
-
-	/* unchained mbufs : payload pointer */
-	DATAPTR_VIRT2NPE(mbuf, IX_ETHACC_NE_DATA(mbuf));
-
-	/* unchained mbufs : set the buffer length
-	* and the frame length field is zeroed
-	*/
-	len = (IX_OSAL_MBUF_MLEN(mbuf) << IX_ETHNPE_ACC_LENGTH_OFFSET);
-	IX_ETHACC_NE_LEN(mbuf) = IX_OSAL_SWAP_BE_SHARED_LONG(len);
-
-	/* unchained mbufs : next pointer is null */
-	IX_ETHACC_NE_NEXT(mbuf) = 0;
-
-	/* flush shared header after all address conversions */
-	IX_ETHACC_NE_CACHE_FLUSH(mbuf);
-
-	/* remove shared header cache line */
-	IX_ETHACC_NE_CACHE_INVALIDATE(mbuf);
-    }
-    else
-    {
-	/* chained mbufs */
-	IX_OSAL_MBUF *ptr = mbuf;
-	IX_OSAL_MBUF *nextPtr;
-
-	do
-	{
-	    /* chained mbufs */
-	    IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedRxFreeMBufs);
-
-	    /* we must save virtual next chain pointer */
-	    nextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr);
-
-	    if (nextPtr != NULL)
-	    {
-		/* chaining pointer for NPE */
-		PTR_VIRT2NPE(IX_ETHACC_NE_SHARED(nextPtr),
-			     IX_ETHACC_NE_NEXT(ptr));
-	    }
-	    else
-	    {
-		IX_ETHACC_NE_NEXT(ptr) = 0;
-	    }
-
-	    /* payload pointer */
-	    DATAPTR_VIRT2NPE(ptr,IX_ETHACC_NE_DATA(ptr));
-
-	    /* buffer length */
-	    len = (IX_OSAL_MBUF_MLEN(ptr) << IX_ETHNPE_ACC_LENGTH_OFFSET);
-	    IX_ETHACC_NE_LEN(ptr) = IX_OSAL_SWAP_BE_SHARED_LONG(len);
-
-	    /* flush shared header after all address conversions */
-	    IX_ETHACC_NE_CACHE_FLUSH(ptr);
-
-	    /* remove shared header cache line */
-	    IX_ETHACC_NE_CACHE_INVALIDATE(ptr);
-
-	    /* next mbuf in the chain */
-	    ptr = nextPtr;
-	}
-	while(ptr != NULL);
-    }
-
-    /* virt2phys mbuf itself */
-    qbuf = (UINT32)IX_OSAL_MMU_VIRT_TO_PHYS(
-		  IX_ETHACC_NE_SHARED(mbuf));
-
-    /* Ensure the bits which are reserved to exchange information with
-     * the NPE are cleared
-     *
-     * If the mbuf address is not correctly aligned, or from an
-     * incompatible memory range, there is no point to continue
-     */
-    IX_OSAL_ENSURE(((qbuf & ~IX_ETHNPE_QM_Q_RXENET_ADDR_MASK) == 0),
-	      "Invalid address range");
-
-    return qbuf;
-}
-
-/* Convert the mbuf header after NPE transmission
- * Since there is nothing changed by the NPE, there is no need
- * to process anything but the update of internal stats
- * when they are enabled
-*/
-PRIVATE void
-ixEthAccMbufFromTxQ(IX_OSAL_MBUF *mbuf)
-{
-#ifndef NDEBUG
-    /* test for unchained mbufs */
-    if (IX_ETHACC_NE_NEXT(mbuf) == 0)
-    {
-	/* unchained mbufs : update the stats */
-	IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedTxDoneMBufs);
-    }
-    else
-    {
-	/* chained mbufs : walk the chain and update the stats */
-	IX_OSAL_MBUF *ptr = mbuf;
-
-	do
-	{
-	    IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedTxDoneMBufs);
-	    ptr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr);
-	}
-	while (ptr != NULL);
-    }
-#endif
-}
-
-/* Convert the mbuf header after NPE reception */
-PRIVATE void
-ixEthAccMbufFromRxQ(IX_OSAL_MBUF *mbuf)
-{
-    UINT32 len;
-
-    /* endianess swap for tci and flags
-       note: this is done only once, even for chained buffers */
-    IX_ETHACC_NE_FLAGS(mbuf)   = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_FLAGS(mbuf));
-    IX_ETHACC_NE_VLANTCI(mbuf) = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_VLANTCI(mbuf));
-
-    /* test for unchained mbufs */
-    if (IX_ETHACC_NE_NEXT(mbuf) == 0)
-    {
-	/* unchained mbufs */
-	IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedRxMBufs);
-
-	/* get the frame length. it is the same than the buffer length */
-	len = IX_OSAL_SWAP_BE_SHARED_LONG(IX_ETHACC_NE_LEN(mbuf));
-	len &= IX_ETHNPE_ACC_PKTLENGTH_MASK;
-	IX_OSAL_MBUF_PKT_LEN(mbuf) = IX_OSAL_MBUF_MLEN(mbuf) = len;
-
-        /* clears the next packet field */
-	IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mbuf) = NULL;
-    }
-    else
-    {
-	IX_OSAL_MBUF *ptr = mbuf;
-	IX_OSAL_MBUF *nextPtr;
-	UINT32 frmLen;
-
-	/* convert the frame length */
-	frmLen = IX_OSAL_SWAP_BE_SHARED_LONG(IX_ETHACC_NE_LEN(mbuf));
-	IX_OSAL_MBUF_PKT_LEN(mbuf) = (frmLen & IX_ETHNPE_ACC_PKTLENGTH_MASK);
-
-        /* chained mbufs */
-	do
-	{
-	    IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedRxMBufs);
-
-	    /* convert the length */
-	    len = IX_OSAL_SWAP_BE_SHARED_LONG(IX_ETHACC_NE_LEN(ptr));
-	    IX_OSAL_MBUF_MLEN(ptr) = (len >> IX_ETHNPE_ACC_LENGTH_OFFSET);
-
-            /* get the next pointer */
-	    PTR_NPE2VIRT(IX_OSAL_MBUF *,IX_ETHACC_NE_NEXT(ptr), nextPtr);
-	    if (nextPtr != NULL)
-	    {
-		nextPtr = (IX_OSAL_MBUF *)((UINT8 *)nextPtr - offsetof(IX_OSAL_MBUF,ix_ne));
-	    }
-	    /* set the next pointer */
-	    IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr) = nextPtr;
-
-	    /* move to the next buffer */
-	    ptr = nextPtr;
-	}
-	while (ptr != NULL);
-    }
-}
-
-/* write to qmgr if possible and report an overflow if not possible
- * Use a fast lock to protect the queue write.
- * This way, the tx feature is reentrant.
- */
-PRIVATE IX_STATUS
-ixEthAccQmgrLockTxWrite(IxEthAccPortId portId, UINT32 qBuffer)
-{
-    IX_STATUS qStatus;
-    if (ixOsalFastMutexTryLock(&txWriteMutex[portId]) == IX_SUCCESS)
-    {
-	qStatus = ixQMgrQWrite(
-	       IX_ETH_ACC_PORT_TO_TX_Q_ID(portId),
-	       &qBuffer);
-#ifndef NDEBUG
-	if (qStatus != IX_SUCCESS)
-	{
-	    TX_STATS_INC(portId, txOverflow);
-	}
-#endif
-	ixOsalFastMutexUnlock(&txWriteMutex[portId]);
-    }
-    else
-    {
-	TX_STATS_INC(portId, txLock);
-	qStatus = IX_QMGR_Q_OVERFLOW;
-    }
-    return qStatus;
-}
-
-/* write to qmgr if possible and report an overflow if not possible
- * Use a fast lock to protect the queue write.
- * This way, the Rx feature is reentrant.
- */
-PRIVATE IX_STATUS
-ixEthAccQmgrLockRxWrite(IxEthAccPortId portId, UINT32 qBuffer)
-{
-    IX_STATUS qStatus;
-    if (ixOsalFastMutexTryLock(&rxWriteMutex[portId]) == IX_SUCCESS)
-    {
-	qStatus = ixQMgrQWrite(
-	       IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId),
-	       &qBuffer);
-#ifndef NDEBUG
-	if (qStatus != IX_SUCCESS)
-	{
-	    RX_STATS_INC(portId, rxFreeOverflow);
-	}
-#endif
-	ixOsalFastMutexUnlock(&rxWriteMutex[portId]);
-    }
-    else
-    {
-	RX_STATS_INC(portId, rxFreeLock);
-	qStatus = IX_QMGR_Q_OVERFLOW;
-    }
-    return qStatus;
-}
-
-/*
- * Set the priority and write to a qmgr queue.
- */
-PRIVATE IX_STATUS
-ixEthAccQmgrTxWrite(IxEthAccPortId portId, UINT32 qBuffer, UINT32 priority)
-{
-    /* fill the priority field */
-    qBuffer |= (priority << IX_ETHNPE_QM_Q_FIELD_PRIOR_R);
-
-    return ixEthAccQmgrLockTxWrite(portId, qBuffer);
-}
-
-/**
- *
- * @brief This function will discover the highest priority S/W Tx Q that
- *        has entries in it
- *
- * @param portId - (in) the id of the port whose S/W Tx queues are to be searched
- *        priorityPtr - (out) the priority of the highest priority occupied q will be written
- *                      here
- *
- * @return IX_ETH_ACC_SUCCESS if an occupied Q is found
- *         IX_ETH_ACC_FAIL if no Q has entries
- *
- * @internal
- */
-PRIVATE IxEthAccStatus
-ixEthAccTxSwQHighestPriorityGet(IxEthAccPortId portId,
-				IxEthAccTxPriority *priorityPtr)
-{
-    if (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline
-	== FIFO_NO_PRIORITY)
-    {
-	if(IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId].
-	       ixEthAccTxData.txQ[IX_ETH_ACC_TX_DEFAULT_PRIORITY]))
-	{
-	    return IX_ETH_ACC_FAIL;
-	}
-	else
-	{
-	    *priorityPtr = IX_ETH_ACC_TX_DEFAULT_PRIORITY;
-	    TX_STATS_INC(portId,txPriority[*priorityPtr]);
-	    return IX_ETH_ACC_SUCCESS;
-	}
-    }
-    else
-    {
-	IxEthAccTxPriority highestPriority = IX_ETH_ACC_TX_PRIORITY_7;
-	while(1)
-	{
-	    if(!IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId].
-	       ixEthAccTxData.txQ[highestPriority]))
-	    {
-
-		*priorityPtr = highestPriority;
-		TX_STATS_INC(portId,txPriority[highestPriority]);
-		return IX_ETH_ACC_SUCCESS;
-
-	    }
-	    if (highestPriority == IX_ETH_ACC_TX_PRIORITY_0)
-	    {
-		return IX_ETH_ACC_FAIL;
-	    }
-	    highestPriority--;
-	}
-    }
-}
-
-/**
- *
- * @brief This function will take a buffer from a TX S/W Q and attempt
- *        to add it to the relevant TX H/W Q
- *
- * @param portId - the port whose TX queue is to be written to
- *        priority - identifies the queue from which the entry is to be read
- *
- * @internal
- */
-PRIVATE IxEthAccStatus
-ixEthAccTxFromSwQ(IxEthAccPortId portId,
-		  IxEthAccTxPriority priority)
-{
-    IX_OSAL_MBUF        *mbuf;
-    IX_STATUS	   qStatus;
-
-    IX_OSAL_ENSURE((UINT32)priority <= (UINT32)7, "Invalid priority");
-
-    IX_ETH_ACC_DATAPLANE_REMOVE_MBUF_FROM_Q_HEAD(
-	ixEthAccPortData[portId].ixEthAccTxData.txQ[priority],
-	mbuf);
-
-    if (mbuf != NULL)
-    {
-	/*
-	 * Add the Tx buffer to the H/W Tx Q
-	 * We do not need to flush here as it is already done
-	 * in TxFrameSubmit().
-	 */
-	qStatus = ixEthAccQmgrTxWrite(
-	      portId,
-	      IX_OSAL_MMU_VIRT_TO_PHYS((UINT32)IX_ETHACC_NE_SHARED(mbuf)),
-	      priority);
-
-	if (qStatus == IX_SUCCESS)
-	{
-	    TX_STATS_INC(portId,txFromSwQOK);
-	    return IX_SUCCESS;
-	}
-	else if (qStatus == IX_QMGR_Q_OVERFLOW)
-	{
-	    /*
-	     * H/W Q overflow, need to save the buffer
-	     * back on the s/w Q.
-	     * we must put it back on the head of the q to avoid
-	     * reordering packet tx
-	     */
-	    TX_STATS_INC(portId,txFromSwQDelayed);
-	    IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD(
-		ixEthAccPortData[portId].ixEthAccTxData.txQ[priority],
-		mbuf);
-
-	    /*enable Q notification*/
-	    qStatus = ixQMgrNotificationEnable(
-		IX_ETH_ACC_PORT_TO_TX_Q_ID(portId),
-		IX_ETH_ACC_PORT_TO_TX_Q_SOURCE(portId));
-
-            if (qStatus != IX_SUCCESS && qStatus != IX_QMGR_WARNING)
-            {
-		TX_INC(portId,txUnexpectedError);
-		IX_ETH_ACC_FATAL_LOG(
-	            "ixEthAccTxFromSwQ:Unexpected Error: %u\n",
-	            qStatus, 0, 0, 0, 0, 0);
-            }
-	}
-	else
-	{
-	    TX_INC(portId,txUnexpectedError);
-
-	    /* recovery attempt */
-	    IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD(
-		ixEthAccPortData[portId].ixEthAccTxData.txQ[priority],
-		mbuf);
-
-	    IX_ETH_ACC_FATAL_LOG(
-		"ixEthAccTxFromSwQ:Error: unexpected QM status 0x%08X\n",
-		qStatus, 0, 0, 0, 0, 0);
-	}
-    }
-    else
-    {
-	/* sw queue is empty */
-    }
-    return IX_ETH_ACC_FAIL;
-}
-
-/**
- *
- * @brief This function will take a buffer from a RXfree S/W Q and attempt
- *        to add it to the relevant RxFree H/W Q
- *
- * @param portId - the port whose RXFree queue is to be written to
- *
- * @internal
- */
-PRIVATE IxEthAccStatus
-ixEthAccRxFreeFromSwQ(IxEthAccPortId portId)
-{
-    IX_OSAL_MBUF        *mbuf;
-    IX_STATUS	   qStatus = IX_SUCCESS;
-
-    IX_ETH_ACC_DATAPLANE_REMOVE_MBUF_FROM_Q_HEAD(
-	  ixEthAccPortData[portId].ixEthAccRxData.freeBufferList,
-	  mbuf);
-    if (mbuf != NULL)
-    {
-	/*
-	 * Add The Rx Buffer to the H/W Free buffer Q if possible
-	 */
-	qStatus = ixEthAccQmgrLockRxWrite(portId,
-		  IX_OSAL_MMU_VIRT_TO_PHYS(
-			 (UINT32)IX_ETHACC_NE_SHARED(mbuf)));
-
-	if (qStatus == IX_SUCCESS)
-	{
-	    RX_STATS_INC(portId,rxFreeRepFromSwQOK);
-	    /*
-	     * Buffer added to h/w Q.
-	     */
-	    return IX_SUCCESS;
-	}
-	else if (qStatus == IX_QMGR_Q_OVERFLOW)
-	{
-	    /*
-	     * H/W Q overflow, need to save the buffer back on the s/w Q.
-	     */
-	    RX_STATS_INC(portId,rxFreeRepFromSwQDelayed);
-
-	    IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD(
-		   ixEthAccPortData[portId].ixEthAccRxData.freeBufferList,
-		   mbuf);
-	}
-	else
-	{
-	    /* unexpected qmgr error */
-	    RX_INC(portId,rxUnexpectedError);
-
-	    IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD(
-		    ixEthAccPortData[portId].ixEthAccRxData.freeBufferList,
-		    mbuf);
-
-	    IX_ETH_ACC_FATAL_LOG("IxEthAccRxFreeFromSwQ:Error: unexpected QM status 0x%08X\n",
-				 qStatus, 0, 0, 0, 0, 0);
-	}
-    }
-    else
-    {
-	/* sw queue is empty */
-    }
-    return IX_ETH_ACC_FAIL;
-}
-
-
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccInitDataPlane()
-{
-    UINT32 portId;
-
-    /*
-     * Initialize the service and register callback to other services.
-     */
-
-    IX_ETH_ACC_MEMSET(&ixEthAccDataStats,
-		      0,
-		      sizeof(ixEthAccDataStats));
-
-    for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++)
-    {
-	ixOsalFastMutexInit(&txWriteMutex[portId]);
-	ixOsalFastMutexInit(&rxWriteMutex[portId]);
-
-	IX_ETH_ACC_MEMSET(&ixEthAccPortData[portId],
-			  0,
-			  sizeof(ixEthAccPortData[portId]));
-
-	ixEthAccPortData[portId].ixEthAccTxData.schDiscipline = FIFO_NO_PRIORITY;
-    }
-
-    return (IX_ETH_ACC_SUCCESS);
-}
-
-
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccPortTxDoneCallbackRegister(IxEthAccPortId portId,
-						  IxEthAccPortTxDoneCallback
-						  txCallbackFn,
-						  UINT32 callbackTag)
-{
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-    if (!IX_ETH_ACC_IS_PORT_VALID(portId))
-    {
-	return (IX_ETH_ACC_INVALID_PORT);
-    }
-
-/* HACK: removing this code to enable NPE-A preliminary testing
- *    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
- *    {
- *        IX_ETH_ACC_WARNING_LOG("ixEthAccPortTxDoneCallbackRegister: Unavailable Eth %d: Cannot register TxDone Callback.\n",(INT32)portId,0,0,0,0,0);
- *        return IX_ETH_ACC_SUCCESS ;
- *    }
- */
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-    if (txCallbackFn == 0)
-	/* Check for null function pointer here. */
-    {
-	return (IX_ETH_ACC_INVALID_ARG);
-    }
-    ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn = txCallbackFn;
-    ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag = callbackTag;
-    return (IX_ETH_ACC_SUCCESS);
-}
-
-
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccPortRxCallbackRegister(IxEthAccPortId portId,
-					      IxEthAccPortRxCallback
-					      rxCallbackFn,
-					      UINT32 callbackTag)
-{
-    IxEthAccPortId port;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-    if (!IX_ETH_ACC_IS_PORT_VALID(portId))
-    {
-	return (IX_ETH_ACC_INVALID_PORT);
-    }
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("ixEthAccPortRxCallbackRegister: Unavailable Eth %d: Cannot register Rx Callback.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* Check for null function pointer here. */
-    if (rxCallbackFn == NULL)
-    {
-	return (IX_ETH_ACC_INVALID_ARG);
-    }
-
-    /* Check the user is not changing the callback type
-     * when the port is enabled.
-    */
-    if (ixEthAccMacState[portId].portDisableState == ACTIVE)
-    {
-	for (port = 0; port < IX_ETH_ACC_NUMBER_OF_PORTS; port++)
-	{
-	    if ((ixEthAccMacState[port].portDisableState == ACTIVE)
-		&& (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == true))
-	    {
-		/* one of the active ports has a different rx callback type.
-		 * Changing the callback type when the port is enabled
-		 * is not safe
-		 */
-		return (IX_ETH_ACC_INVALID_ARG);
-	    }
-	}
-    }
-
-    /* update the callback pointer : this is done before
-     * registering the new qmgr callback
-     */
-    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn = rxCallbackFn;
-    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag = callbackTag;
-
-    /* update the qmgr callback for rx queues */
-    if (ixEthAccQMgrRxCallbacksRegister(ixEthRxFrameQMCallback)
-	!= IX_ETH_ACC_SUCCESS)
-    {
-	/* unexpected qmgr error */
-        IX_ETH_ACC_FATAL_LOG("ixEthAccPortRxCallbackRegister: unexpected QMgr error, " \
-            "could not register Rx single-buffer callback\n", 0, 0, 0, 0, 0, 0);
-
-	RX_INC(portId,rxUnexpectedError);
-	return (IX_ETH_ACC_INVALID_ARG);
-    }
-
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = false;
-
-    return (IX_ETH_ACC_SUCCESS);
-}
-
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccPortMultiBufferRxCallbackRegister(
-			 IxEthAccPortId portId,
-			 IxEthAccPortMultiBufferRxCallback
-			 rxCallbackFn,
-			 UINT32 callbackTag)
-{
-    IxEthAccPortId port;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-    if (!IX_ETH_ACC_IS_PORT_VALID(portId))
-    {
-	return (IX_ETH_ACC_INVALID_PORT);
-    }
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("ixEthAccPortMultiBufferRxCallbackRegister: Unavailable Eth %d: Cannot register Rx Callback.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* Check for null function pointer here. */
-    if (rxCallbackFn == NULL)
-    {
-	return (IX_ETH_ACC_INVALID_ARG);
-    }
-
-    /* Check the user is not changing the callback type
-     * when the port is enabled.
-    */
-    if (ixEthAccMacState[portId].portDisableState == ACTIVE)
-    {
-	for (port = 0; port < IX_ETH_ACC_NUMBER_OF_PORTS; port++)
-	{
-	    if ((ixEthAccMacState[port].portDisableState == ACTIVE)
-		&& (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == false))
-	    {
-		/* one of the active ports has a different rx callback type.
-		 * Changing the callback type when the port is enabled
-		 * is not safe
-		 */
-		return (IX_ETH_ACC_INVALID_ARG);
-	    }
-	}
-    }
-
-    /* update the callback pointer : this is done before
-     * registering the new qmgr callback
-     */
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = rxCallbackFn;
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = callbackTag;
-
-    /* update the qmgr callback for rx queues */
-    if (ixEthAccQMgrRxCallbacksRegister(ixEthRxMultiBufferQMCallback)
-	!= IX_ETH_ACC_SUCCESS)
-    {
-	/* unexpected qmgr error */
-	RX_INC(portId,rxUnexpectedError);
-
-        IX_ETH_ACC_FATAL_LOG("ixEthAccPortMultiBufferRxCallbackRegister: unexpected QMgr error, " \
-            "could not register Rx multi-buffer callback\n", 0, 0, 0, 0, 0, 0);
-
-	return (IX_ETH_ACC_INVALID_ARG);
-    }
-
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = true;
-
-    return (IX_ETH_ACC_SUCCESS);
-}
-
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccPortTxFrameSubmit(IxEthAccPortId portId,
-					 IX_OSAL_MBUF *buffer,
-					 IxEthAccTxPriority priority)
-{
-    IX_STATUS	qStatus = IX_SUCCESS;
-    UINT32      qBuffer;
-    IxEthAccTxPriority highestPriority;
-    IxQMgrQStatus txQStatus;
-
-#ifndef NDEBUG
-    if (buffer == NULL)
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-    if (!IX_ETH_ACC_IS_PORT_VALID(portId))
-    {
-	return (IX_ETH_ACC_INVALID_PORT);
-    }
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_FATAL_LOG("ixEthAccPortTxFrameSubmit: Unavailable Eth %d: Cannot submit Tx Frame.\n",
-			     (INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_PORT_UNINITIALIZED ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-    if ((UINT32)priority > (UINT32)IX_ETH_ACC_TX_PRIORITY_7)
-    {
-	return (IX_ETH_ACC_INVALID_ARG);
-    }
-#endif
-
-    /*
-     * Need to Flush the MBUF and its contents (data) as it may be
-     * read from the NPE. Convert virtual addresses to physical addresses also.
-     */
-    qBuffer = ixEthAccMbufTxQPrepare(buffer);
-
-    /*
-     * If no fifo priority set on Xscale ...
-     */
-    if (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline ==
-	FIFO_NO_PRIORITY)
-    {
-	/*
-	 * Add The Tx Buffer to the H/W Tx Q if possible
-	 * (the priority is passed to the NPE, because
-	 * the NPE is able to reorder the frames
-	 * before transmission to the underlying hardware)
-	 */
-	qStatus = ixEthAccQmgrTxWrite(portId,
-				      qBuffer,
-				      IX_ETH_ACC_TX_DEFAULT_PRIORITY);
-
-	if (qStatus == IX_SUCCESS)
-	{
-	    TX_STATS_INC(portId,txQOK);
-
-	    /*
-	     * "best case" scenario : Buffer added to h/w Q.
-	     */
-	    return (IX_SUCCESS);
-	}
-	else if (qStatus == IX_QMGR_Q_OVERFLOW)
-	{
-	    /*
-	     * We were unable to write the buffer to the
-	     * appropriate H/W Q,  Save it in the sw Q.
-	     * (use the default priority queue regardless of
-	     * input parameter)
-	     */
-	    priority = IX_ETH_ACC_TX_DEFAULT_PRIORITY;
-	}
-	else
-	{
-	    /* unexpected qmgr error */
-	    TX_INC(portId,txUnexpectedError);
-	    IX_ETH_ACC_FATAL_LOG(
-		"ixEthAccPortTxFrameSubmit:Error: qStatus = %u\n",
-		(UINT32)qStatus, 0, 0, 0, 0, 0);
-	    return (IX_ETH_ACC_FAIL);
-	}
-    }
-    else if (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline ==
-	     FIFO_PRIORITY)
-    {
-
-	/*
-	 * For priority transmission, put the frame directly on the H/W queue
-	 * if the H/W queue is empty, otherwise, put it in a S/W Q
-	 */
-	ixQMgrQStatusGet(IX_ETH_ACC_PORT_TO_TX_Q_ID(portId), &txQStatus);
-	if((txQStatus & IX_QMGR_Q_STATUS_E_BIT_MASK) != 0)
-	{
-	    /*The tx queue is empty, check whether there are buffers on the s/w queues*/
-	    if(ixEthAccTxSwQHighestPriorityGet(portId,  &highestPriority)
-	       !=IX_ETH_ACC_FAIL)
-	    {
-		/*there are buffers on the s/w queues, submit them*/
-		ixEthAccTxFromSwQ(portId, highestPriority);
-
-		/* the queue was empty, 1 buffer is already supplied
-		 * but is likely to be immediately transmitted and the
-		 * hw queue is likely to be empty again, so submit
-		 * more from the sw queues
-		 */
-		if(ixEthAccTxSwQHighestPriorityGet(portId,  &highestPriority)
-		   !=IX_ETH_ACC_FAIL)
-		{
-		    ixEthAccTxFromSwQ(portId, highestPriority);
-		    /*
-		     * and force the buffer supplied to be placed
-		     * on a priority queue
-		     */
-		    qStatus = IX_QMGR_Q_OVERFLOW;
-		}
-		else
-		{
-		    /*there are no buffers in the s/w queues, submit directly*/
-		    qStatus = ixEthAccQmgrTxWrite(portId, qBuffer, priority);
-		}
-	    }
-	    else
-	    {
-		/*there are no buffers in the s/w queues, submit directly*/
-		qStatus = ixEthAccQmgrTxWrite(portId, qBuffer, priority);
-	    }
-	}
-	else
-	{
-	    qStatus = IX_QMGR_Q_OVERFLOW;
-	}
-    }
-    else
-    {
-	TX_INC(portId,txUnexpectedError);
-	IX_ETH_ACC_FATAL_LOG(
-	    "ixEthAccPortTxFrameSubmit:Error: wrong schedule discipline setup\n",
-	    0, 0, 0, 0, 0, 0);
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    if(qStatus == IX_SUCCESS )
-    {
-	TX_STATS_INC(portId,txQOK);
-	return IX_ETH_ACC_SUCCESS;
-    }
-    else if(qStatus == IX_QMGR_Q_OVERFLOW)
-    {
-	TX_STATS_INC(portId,txQDelayed);
-	/*
-	 * We were unable to write the buffer to the
-	 * appropriate H/W Q,  Save it in a s/w Q.
-	 */
-	IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_TAIL(
-		ixEthAccPortData[portId].
-		ixEthAccTxData.txQ[priority],
-		buffer);
-
-	qStatus = ixQMgrNotificationEnable(
-		IX_ETH_ACC_PORT_TO_TX_Q_ID(portId),
-		IX_ETH_ACC_PORT_TO_TX_Q_SOURCE(portId));
-
-        if (qStatus != IX_SUCCESS)
-	{
-	    if (qStatus == IX_QMGR_WARNING)
-	    {
-		/* notification is enabled for a queue
-		 * which is already empty (the condition is already met)
-		 * and there will be no more queue event to drain the sw queue
-		 */
-		TX_STATS_INC(portId,txLateNotificationEnabled);
-
-		/* pull a buffer from the sw queue */
-		if(ixEthAccTxSwQHighestPriorityGet(portId,  &highestPriority)
-		   !=IX_ETH_ACC_FAIL)
-		{
-		    /*there are buffers on the s/w queues, submit from them*/
-		    ixEthAccTxFromSwQ(portId, highestPriority);
-		}
-	    }
-	    else
-	    {
-		TX_INC(portId,txUnexpectedError);
-		IX_ETH_ACC_FATAL_LOG(
-		     "ixEthAccPortTxFrameSubmit: unexpected Error: %u\n",
-		     qStatus, 0, 0, 0, 0, 0);
-	    }
-        }
-    }
-    else
-    {
-	TX_INC(portId,txUnexpectedError);
-	IX_ETH_ACC_FATAL_LOG(
-	     "ixEthAccPortTxFrameSubmit: unexpected Error: %u\n",
-	     qStatus, 0, 0, 0, 0, 0);
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    return (IX_ETH_ACC_SUCCESS);
-}
-
-
-/**
- *
- * @brief replenish: convert a chain of mbufs to the format
- *        expected by the NPE
- *
-  */
-
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccPortRxFreeReplenish(IxEthAccPortId portId,
-					   IX_OSAL_MBUF *buffer)
-{
-    IX_STATUS	qStatus = IX_SUCCESS;
-    UINT32      qBuffer;
-
-    /*
-     * Check buffer is valid.
-     */
-
-#ifndef NDEBUG
-    /* check parameter value */
-    if (buffer == 0)
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-    if (!IX_ETH_ACC_IS_PORT_VALID(portId))
-    {
-	return (IX_ETH_ACC_INVALID_PORT);
-    }
-
-    /* check initialisation is done */
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_FATAL_LOG(" ixEthAccPortRxFreeReplenish: Unavailable Eth %d: Cannot replenish Rx Free Q.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_PORT_UNINITIALIZED ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-    /* check boundaries and constraints */
-    if (IX_OSAL_MBUF_MLEN(buffer) < IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN)
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-#endif
-
-    qBuffer = ixEthAccMbufRxQPrepare(buffer);
-
-    /*
-     * Add The Rx Buffer to the H/W Free buffer Q if possible
-     */
-    qStatus = ixEthAccQmgrLockRxWrite(portId, qBuffer);
-
-    if (qStatus == IX_SUCCESS)
-    {
-	RX_STATS_INC(portId,rxFreeRepOK);
-	/*
-	 * Buffer added to h/w Q.
-	 */
-	return (IX_SUCCESS);
-    }
-    else if (qStatus == IX_QMGR_Q_OVERFLOW)
-    {
-	RX_STATS_INC(portId,rxFreeRepDelayed);
-	/*
-	 * We were unable to write the buffer to the approprate H/W Q,
-	 * Save it in a s/w Q.
-	 */
-	IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_TAIL(
-	    ixEthAccPortData[portId].ixEthAccRxData.freeBufferList,
-	    buffer);
-
-	qStatus = ixQMgrNotificationEnable(
-	    IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId),
-	    IX_ETH_ACC_PORT_TO_RX_FREE_Q_SOURCE(portId));
-
-        if (qStatus != IX_SUCCESS)
-	{
-	    if (qStatus == IX_QMGR_WARNING)
-	    {
-		/* notification is enabled for a queue
-		 * which is already empty (the condition is already met)
-		 * and there will be no more queue event to drain the sw queue
-		 * move an entry from the sw queue to the hw queue */
-		RX_STATS_INC(portId,rxFreeLateNotificationEnabled);
-		ixEthAccRxFreeFromSwQ(portId);
-	    }
-	    else
-	    {
-		RX_INC(portId,rxUnexpectedError);
-		IX_ETH_ACC_FATAL_LOG(
-		     "ixEthAccRxPortFreeReplenish:Error: %u\n",
-		     qStatus, 0, 0, 0, 0, 0);
-	    }
-        }
-    }
-    else
-    {
-	RX_INC(portId,rxUnexpectedError);
-	IX_ETH_ACC_FATAL_LOG(
-	    "ixEthAccRxPortFreeReplenish:Error: qStatus = %u\n",
-	    (UINT32)qStatus, 0, 0, 0, 0, 0);
-        return(IX_ETH_ACC_FAIL);
-    }
-    return (IX_ETH_ACC_SUCCESS);
-}
-
-
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccTxSchedulingDisciplineSetPriv(IxEthAccPortId portId,
-						 IxEthAccSchedulerDiscipline
-						 sched)
-{
-    if (!IX_ETH_ACC_IS_PORT_VALID(portId))
-    {
-	return (IX_ETH_ACC_INVALID_PORT);
-    }
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("ixEthAccTxSchedulingDisciplineSet: Unavailable Eth %d: Cannot set Tx Scheduling Discipline.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    if (sched != FIFO_PRIORITY && sched != FIFO_NO_PRIORITY)
-    {
-	return (IX_ETH_ACC_INVALID_ARG);
-    }
-
-    ixEthAccPortData[portId].ixEthAccTxData.schDiscipline = sched;
-    return (IX_ETH_ACC_SUCCESS);
-}
-
-IX_ETH_ACC_PUBLIC
-IxEthAccStatus ixEthAccRxSchedulingDisciplineSetPriv(IxEthAccSchedulerDiscipline
-						 sched)
-{
-    if (sched != FIFO_PRIORITY && sched != FIFO_NO_PRIORITY)
-    {
-	return (IX_ETH_ACC_INVALID_ARG);
-    }
-
-    ixEthAccDataInfo.schDiscipline = sched;
-
-    return (IX_ETH_ACC_SUCCESS);
-}
-
-
-/**
- * @fn ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr)
- *
- * @brief process incoming frame :
- *
- * @param @ref IxQMgrCallback IxQMgrMultiBufferCallback
- *
- * @return none
- *
- * @internal
- *
- */
-IX_ETH_ACC_PRIVATE BOOL
-ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr)
-{
-    UINT32 flags;
-    IxEthDBStatus result;
-
-#ifndef NDEBUG
-    /* Prudent to at least check the port is within range */
-    if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
-    {
-	ixEthAccDataStats.unexpectedError++;
-	IX_ETH_ACC_FATAL_LOG(
-	     "ixEthRxFrameProcess: Illegal port: %u\n",
-	     (UINT32)portId, 0, 0, 0, 0, 0);
-	return false;
-    }
-#endif
-
-    /* convert fields from mbuf header */
-    ixEthAccMbufFromRxQ(mbufPtr);
-
-    /* check about any special processing for this frame */
-    flags = IX_ETHACC_NE_FLAGS(mbufPtr);
-    if ((flags & (IX_ETHACC_NE_FILTERMASK | IX_ETHACC_NE_NEWSRCMASK)) == 0)
-    {
-	/* "best case" scenario : nothing special to do for this frame */
-	return true;
-    }
-
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-    /* if a new source MAC address is detected by the NPE,
-     * update IxEthDB with the portId and the MAC address.
-     */
-    if ((flags & IX_ETHACC_NE_NEWSRCMASK & ixEthAccNewSrcMask) != 0)
-    {
-        result = ixEthDBFilteringDynamicEntryProvision(portId,
-			  (IxEthDBMacAddr *) IX_ETHACC_NE_SOURCEMAC(mbufPtr));
-
-	if (result != IX_ETH_DB_SUCCESS && result != IX_ETH_DB_FEATURE_UNAVAILABLE)
-	{
-            if ((ixEthAccMacState[portId].portDisableState == ACTIVE) && (result != IX_ETH_DB_BUSY))
-            {
-	        RX_STATS_INC(portId, rxUnexpectedError);
-                IX_ETH_ACC_FATAL_LOG("ixEthRxFrameProcess: Failed to add source MAC \
-                                    to the Learning/Filtering database\n", 0, 0, 0, 0, 0, 0);
-            }
-            else
-            {
-                /* we expect this to fail during PortDisable, as EthDB is disabled for
-                 * that port and will refuse to learn new addresses
-		 */
-            }
-	}
-	else
-	{
-	    RX_STATS_INC(portId, rxUnlearnedMacAddress);
-	}
-    }
-#endif
-
-    /* check if this frame should have been filtered
-     * by the NPE and take the appropriate action
-     */
-    if (((flags & IX_ETHACC_NE_FILTERMASK) != 0)
-        && (ixEthAccMacState[portId].portDisableState == ACTIVE))
-    {
-        /* If the mbuf was allocated with a small data size, or the current data pointer is not
-         * within the allocated data area, then the buffer is non-standard and has to be
-         * replenished with the minimum size only
-         */
-        if( (IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(mbufPtr) < IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN)
-           || ((UINT8 *)IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(mbufPtr) > IX_OSAL_MBUF_MDATA(mbufPtr))
-           || ((UINT8 *)(IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(mbufPtr) +
-              IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(mbufPtr))
-               < IX_OSAL_MBUF_MDATA(mbufPtr)) )
-        {
-            /* set to minimum length */
-            IX_OSAL_MBUF_MLEN(mbufPtr) = IX_OSAL_MBUF_PKT_LEN(mbufPtr) =
-                IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN;
-        }
-        else
-        {
-            /* restore original length */
-            IX_OSAL_MBUF_MLEN(mbufPtr) = IX_OSAL_MBUF_PKT_LEN(mbufPtr) =
-                ( IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(mbufPtr) -
-                 (IX_OSAL_MBUF_MDATA(mbufPtr) - (UINT8 *)IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(mbufPtr)) );
-        }
-
-        /* replenish from here */
-        if (ixEthAccPortRxFreeReplenish(portId, mbufPtr) != IX_ETH_ACC_SUCCESS)
-        {
-                IX_ETH_ACC_FATAL_LOG("ixEthRxFrameProcess: Failed to replenish with filtered frame\
-                                      on port %d\n", portId, 0, 0, 0, 0, 0);
-        }
-
-        RX_STATS_INC(portId, rxFiltered);
-
-        /* indicate that frame should not be subjected to further processing */
-        return false;
-    }
-
-    return true;
-}
-
-
-/**
- * @fn ixEthRxFrameQMCallback
- *
- * @brief receive callback for Frame receive Q from NPE
- *
- * Frames are passed one-at-a-time to the user
- *
- * @param @ref IxQMgrCallback
- *
- * @return none
- *
- * @internal
- *
- * Design note : while processing the entry X, entry X+1 is preloaded
- * into memory to reduce the number of stall cycles
- *
- */
-void ixEthRxFrameQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId)
-{
-    IX_OSAL_MBUF    *mbufPtr;
-    IX_OSAL_MBUF    *nextMbufPtr;
-    UINT32     qEntry;
-    UINT32     nextQEntry;
-    UINT32     *qEntryPtr;
-    UINT32     portId;
-    UINT32     destPortId;
-    UINT32     npeId;
-    UINT32     rxQReadStatus;
-
-    /*
-     * Design note : entries are read in a buffer, This buffer contains
-     * an extra zeroed entry so the loop will
-     * always terminate on a null entry, whatever the result of Burst read is.
-     */
-    UINT32 rxQEntry[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK + 1];
-
-    /*
-     * Indication of the number of times the callback is used.
-     */
-    IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackCounter);
-
-    do
-    {
-	/*
-	 * Indication of the number of times the queue is drained
-	 */
-	IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackBurstRead);
-
-	/* ensure the last entry of the array contains a zeroed value */
-	qEntryPtr = rxQEntry;
-	qEntryPtr[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK] = 0;
-
-	rxQReadStatus = ixQMgrQBurstRead(qId,
-		 IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK,
-		 qEntryPtr);
-
-#ifndef NDEBUG
-	if ((rxQReadStatus != IX_QMGR_Q_UNDERFLOW)
-	    && (rxQReadStatus != IX_SUCCESS))
-	{
-	    ixEthAccDataStats.unexpectedError++;
-	    /*major error*/
-	    IX_ETH_ACC_FATAL_LOG(
-		"ixEthRxFrameQMCallback:Error: %u\n",
-		(UINT32)rxQReadStatus, 0, 0, 0, 0, 0);
-	    return;
-	}
-#endif
-
-	/* convert and preload the next entry
-	 * (the conversion function takes care about null pointers which
-	 * are used to mark the end of the loop)
-	 */
-	nextQEntry = *qEntryPtr;
-	nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry,
-			  IX_ETHNPE_QM_Q_RXENET_ADDR_MASK);
-
-	while(nextQEntry != 0)
-	{
-	    /* get the next entry */
-	    qEntry = nextQEntry;
-	    mbufPtr = nextMbufPtr;
-
-#ifndef NDEBUG
-	    if (mbufPtr == NULL)
-	    {
-		ixEthAccDataStats.unexpectedError++;
-		IX_ETH_ACC_FATAL_LOG(
-		    "ixEthRxFrameQMCallback: Null Mbuf Ptr\n",
-		    0, 0, 0, 0, 0, 0);
-		return;
-	    }
-#endif
-
-	    /* convert the next entry
-	     * (the conversion function takes care about null pointers which
-	     * are used to mark the end of the loop)
-	     */
-	    nextQEntry = *(++qEntryPtr);
-	    nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry,
-			      IX_ETHNPE_QM_Q_RXENET_ADDR_MASK);
-
-	    /*
-	     * Get Port and Npe ID from message.
-	     */
-	    npeId = ((IX_ETHNPE_QM_Q_RXENET_NPEID_MASK &
-		      qEntry) >> IX_ETHNPE_QM_Q_FIELD_NPEID_R);
-	    portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
-
-	    /* process frame, check the return code and skip the remaining of
-	     * the loop if the frame is to be filtered out
-	     */
-            if (ixEthRxFrameProcess(portId, mbufPtr))
-            {
-	        /* destination portId for this packet */
-	        destPortId = IX_ETHACC_NE_DESTPORTID(mbufPtr);
-
-                if (destPortId != IX_ETH_DB_UNKNOWN_PORT)
-                {
-                    destPortId = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(destPortId);
-                }
-
-	        /* test if QoS is enabled in ethAcc
-	        */
-	        if (ixEthAccDataInfo.schDiscipline == FIFO_PRIORITY)
-	        {
-		    /* check if there is a higher priority queue
-		    * which may require processing and then process it.
-		    */
-		    if (ixEthAccDataInfo.higherPriorityQueue[qId] < IX_QMGR_MAX_NUM_QUEUES)
-		    {
-		        ixEthRxFrameQMCallback(ixEthAccDataInfo.higherPriorityQueue[qId],
-					    callbackId);
-		    }
-	        }
-
-	        /*
-	        * increment priority stats
-	        */
-	        RX_STATS_INC(portId,rxPriority[IX_ETHACC_NE_QOS(mbufPtr)]);
-
-	        /*
-	        * increment callback count stats
-	        */
-	        RX_STATS_INC(portId,rxFrameClientCallback);
-
-	        /*
-	        * Call user level callback.
-	        */
-	        ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn(
-		    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag,
-		    mbufPtr,
-		    destPortId);
-            }
-	}
-    } while (rxQReadStatus == IX_SUCCESS);
-}
-
-/**
- * @fn ixEthRxMultiBufferQMCallback
- *
- * @brief receive callback for Frame receive Q from NPE
- *
- * Frames are passed as an array to the user
- *
- * @param @ref IxQMgrCallback
- *
- * @return none
- *
- * @internal
- *
- * Design note : while processing the entry X, entry X+1 is preloaded
- * into memory to reduce the number of stall cycles
- *
- */
-void ixEthRxMultiBufferQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId)
-{
-    IX_OSAL_MBUF    *mbufPtr;
-    IX_OSAL_MBUF    *nextMbufPtr;
-    UINT32     qEntry;
-    UINT32     nextQEntry;
-    UINT32     *qEntryPtr;
-    UINT32     portId;
-    UINT32     npeId;
-    UINT32     rxQReadStatus;
-    /*
-     * Design note : entries are read in a static buffer, This buffer contains
-     * an extra zeroed entry so the loop will
-     * always terminate on a null entry, whatever the result of Burst read is.
-     */
-    static UINT32 rxQEntry[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK + 1];
-    static IX_OSAL_MBUF *rxMbufPortArray[IX_ETH_ACC_NUMBER_OF_PORTS][IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK + 1];
-    IX_OSAL_MBUF **rxMbufPtr[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-    for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++)
-    {
-	rxMbufPtr[portId] = rxMbufPortArray[portId];
-    }
-
-    /*
-     * Indication of the number of times the callback is used.
-     */
-    IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackCounter);
-
-    do
-    {
-	/*
-	 * Indication of the number of times the queue is drained
-	 */
-	IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackBurstRead);
-
-	/* ensure the last entry of the array contains a zeroed value */
-	qEntryPtr = rxQEntry;
-	qEntryPtr[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK] = 0;
-
-	rxQReadStatus = ixQMgrQBurstRead(qId,
-		 IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK,
-		 qEntryPtr);
-
-#ifndef NDEBUG
-	if ((rxQReadStatus != IX_QMGR_Q_UNDERFLOW)
-	    && (rxQReadStatus != IX_SUCCESS))
-	{
-	    ixEthAccDataStats.unexpectedError++;
-	    /*major error*/
-	    IX_ETH_ACC_FATAL_LOG(
-		"ixEthRxFrameMultiBufferQMCallback:Error: %u\n",
-		(UINT32)rxQReadStatus, 0, 0, 0, 0, 0);
-	    return;
-	}
-#endif
-
-	/* convert and preload the next entry
-	 * (the conversion function takes care about null pointers which
-	 * are used to mark the end of the loop)
-	 */
-	nextQEntry = *qEntryPtr;
-	nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry,
-			  IX_ETHNPE_QM_Q_RXENET_ADDR_MASK);
-
-	while(nextQEntry != 0)
-	{
-	    /* get the next entry */
-	    qEntry = nextQEntry;
-	    mbufPtr = nextMbufPtr;
-
-#ifndef NDEBUG
-	    if (mbufPtr == NULL)
-	    {
-		ixEthAccDataStats.unexpectedError++;
-		IX_ETH_ACC_FATAL_LOG(
-		    "ixEthRxFrameMultiBufferQMCallback:Error: Null Mbuf Ptr\n",
-		    0, 0, 0, 0, 0, 0);
-		return;
-	    }
-#endif
-
-	    /* convert the next entry
-	     * (the conversion function takes care about null pointers which
-	     * are used to mark the end of the loop)
-	     */
-	    nextQEntry = *(++qEntryPtr);
-	    nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry,
-			      IX_ETHNPE_QM_Q_RXENET_ADDR_MASK);
-
-	    /*
-	     * Get Port and Npe ID from message.
-	     */
-	    npeId = ((IX_ETHNPE_QM_Q_RXENET_NPEID_MASK &
-		      qEntry) >>
-		     IX_ETHNPE_QM_Q_FIELD_NPEID_R);
-	    portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
-
-	    /* skip the remaining of the loop if the frame is
-	     * to be filtered out
-	     */
-	    if (ixEthRxFrameProcess(portId, mbufPtr))
-	    {
-		/* store a mbuf pointer in an array */
-		*rxMbufPtr[portId]++ = mbufPtr;
-
-		/*
-		 * increment priority stats
-		 */
-		RX_STATS_INC(portId,rxPriority[IX_ETHACC_NE_QOS(mbufPtr)]);
-	    }
-
-	    /* test for QoS enabled in ethAcc */
-	    if (ixEthAccDataInfo.schDiscipline == FIFO_PRIORITY)
-	    {
-		/* check if there is a higher priority queue
-		 * which may require processing and then process it.
-		 */
-		if (ixEthAccDataInfo.higherPriorityQueue[qId] < IX_QMGR_MAX_NUM_QUEUES)
-		{
-		    ixEthRxMultiBufferQMCallback(ixEthAccDataInfo.higherPriorityQueue[qId],
-						 callbackId);
-		}
-	    }
-	}
-
-	/* check if any of the the arrays contains any entry */
-	for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++)
-	{
-	    if (rxMbufPtr[portId] != rxMbufPortArray[portId])
-	    {
-		/* add a last NULL pointer at the end of the
-		 * array of mbuf pointers
-		 */
-		*rxMbufPtr[portId] = NULL;
-
-		/*
-		 * increment callback count stats
-		 */
-		RX_STATS_INC(portId,rxFrameClientCallback);
-
-		/*
-		 * Call user level callback with an array of
-		 * buffers (NULL terminated)
-		 */
-		ixEthAccPortData[portId].ixEthAccRxData.
-		    rxMultiBufferCallbackFn(
-			    ixEthAccPortData[portId].ixEthAccRxData.
-			           rxMultiBufferCallbackTag,
-			    rxMbufPortArray[portId]);
-
-		/* reset the buffer pointer to the beginning of
-		 * the array
-		 */
-		rxMbufPtr[portId] = rxMbufPortArray[portId];
-	    }
-	}
-
-    } while (rxQReadStatus == IX_SUCCESS);
-}
-
-
-/**
- * @brief  rxFree low event handler
- *
- */
-void ixEthRxFreeQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId)
-{
-    IxEthAccPortId	portId = (IxEthAccPortId) callbackId;
-    int		        lockVal;
-    UINT32		maxQWritesToPerform = IX_ETH_ACC_MAX_RX_FREE_BUFFERS_LOAD;
-    IX_STATUS	        qStatus = IX_SUCCESS;
-
-    /*
-     * We have reached a low threshold on one of the Rx Free Qs
-     */
-
-    /*note that due to the fact that we are working off an Empty threshold, this callback
-      need only write a single entry to the Rx Free queue in order to re-arm the notification
-    */
-
-    RX_STATS_INC(portId,rxFreeLowCallback);
-
-    /*
-     * Get buffers from approprite S/W Rx freeBufferList Q.
-     */
-
-#ifndef NDEBUG
-    if (!IX_ETH_ACC_IS_PORT_VALID(portId))
-    {
-	ixEthAccDataStats.unexpectedError++;
-	IX_ETH_ACC_FATAL_LOG(
-	    "ixEthRxFreeQMCallback:Error: Invalid Port 0x%08X\n",
-	    portId, 0, 0, 0, 0, 0);
-	return;
-    }
-#endif
-    IX_ETH_ACC_DATA_PLANE_LOCK(lockVal);
-    if (IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId].
-					ixEthAccRxData.freeBufferList))
-    {
-	/*
-	 * Turn off Q callback notification for Q in Question.
-	 */
-	qStatus = ixQMgrNotificationDisable(
-	    IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId));
-
-
-	IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal);
-
-	if (qStatus != IX_SUCCESS)
-	{
-	    RX_INC(portId,rxUnexpectedError);
-	    IX_ETH_ACC_FATAL_LOG(
-		"ixEthRxFreeQMCallback:Error: unexpected QM status 0x%08X\n",
-		qStatus, 0, 0, 0, 0, 0);
-	    return;
-	}
-    }
-    else
-    {
-	IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal);
-	/*
-	 * Load the H/W Q with buffers from the s/w Q.
-	 */
-
-	do
-	{
-	    /*
-	     * Consume Q entries. - Note Q contains Physical addresss,
-	     * and have already been flushed to memory,
-	     * And endianess converted if required.
-	     */
-	    if (ixEthAccRxFreeFromSwQ(portId) != IX_SUCCESS)
-	    {
-		/*
-		 * No more entries in s/w Q.
-		 * Turn off Q callback indication
-		 */
-
-		IX_ETH_ACC_DATA_PLANE_LOCK(lockVal);
-		if (IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId].
-		    ixEthAccRxData.freeBufferList))
-		{
-		    qStatus = ixQMgrNotificationDisable(
-			IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId));
-		}
-		IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal);
-		break;
-	    }
-	}
-	while (--maxQWritesToPerform);
-    }
-}
-/**
- * @fn Tx queue low event handler
- *
- */
-void
-ixEthTxFrameQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId)
-{
-    IxEthAccPortId portId = (IxEthAccPortId) callbackId;
-    int		   lockVal;
-    UINT32	   maxQWritesToPerform = IX_ETH_ACC_MAX_TX_FRAME_TX_CONSUME_PER_CALLBACK;
-    IX_STATUS	   qStatus = IX_SUCCESS;
-    IxEthAccTxPriority highestPriority;
-
-
-    /*
-     * We have reached a low threshold on the Tx Q, and are being asked to
-     * supply a buffer for transmission from our S/W TX queues
-     */
-    TX_STATS_INC(portId,txLowThreshCallback);
-
-    /*
-     * Get buffers from approprite Q.
-     */
-
-#ifndef NDEBUG
-    if (!IX_ETH_ACC_IS_PORT_VALID(portId))
-    {
-	ixEthAccDataStats.unexpectedError++;
-	IX_ETH_ACC_FATAL_LOG(
-	    "ixEthTxFrameQMCallback:Error: Invalid Port 0x%08X\n",
-	    portId, 0, 0, 0, 0, 0);
-	return;
-    }
-#endif
-
-    do
-    {
-	/*
-	 * Consume Q entries. - Note Q contains Physical addresss,
-	 * and have already been flushed to memory,
-	 * and endianess already sone if required.
-	 */
-
-	IX_ETH_ACC_DATA_PLANE_LOCK(lockVal);
-
-	if(ixEthAccTxSwQHighestPriorityGet(portId, &highestPriority) ==
-	   IX_ETH_ACC_FAIL)
-	{
-	    /*
-	     * No more entries in s/w Q.
-	     * Turn off Q callback indication
-	     */
-	    qStatus = ixQMgrNotificationDisable(
-		IX_ETH_ACC_PORT_TO_TX_Q_ID(portId));
-
-	    IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal);
-
-	    if (qStatus != IX_SUCCESS)
-	    {
-		ixEthAccDataStats.unexpectedError++;
-		IX_ETH_ACC_FATAL_LOG(
-		    "ixEthTxFrameQMCallback:Error: unexpected QM status 0x%08X\n",
-		    qStatus, 0, 0, 0, 0, 0);
-	    }
-
-	    return;
-	}
-	else
-	{
-	    IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal);
-	    if (ixEthAccTxFromSwQ(portId,highestPriority)!=IX_SUCCESS)
-	    {
-                /* nothing left in the sw queue or the hw queues are
-                * full. There is no point to continue to drain the
-                * sw queues
-                */
-		return;
-	    }
-	}
-    }
-    while (--maxQWritesToPerform);
-}
-
-/**
- * @brief TxDone event handler
- *
- * Design note : while processing the entry X, entry X+1 is preloaded
- * into memory to reduce the number of stall cycles
- *
- */
-
-void
-ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId)
-{
-    IX_OSAL_MBUF    *mbufPtr;
-    UINT32     qEntry;
-    UINT32     *qEntryPtr;
-    UINT32     txDoneQReadStatus;
-    UINT32     portId;
-    UINT32     npeId;
-
-    /*
-     * Design note : entries are read in a static buffer, This buffer contains
-     * an extra entyry (which is zeroed by the compiler), so the loop will
-     * always terminate on a null entry, whatever the result of Burst read is.
-     */
-    static UINT32 txDoneQEntry[IX_ETH_ACC_MAX_TX_FRAME_DONE_CONSUME_PER_CALLBACK + 1];
-
-    /*
-     * Indication that Tx frames have been transmitted from the NPE.
-     */
-
-    IX_ETH_ACC_STATS_INC(ixEthAccDataStats.txDoneCallbackCounter);
-
-    do{
-	qEntryPtr = txDoneQEntry;
-	txDoneQReadStatus = ixQMgrQBurstRead(IX_ETH_ACC_TX_FRAME_DONE_ETH_Q,
-		     IX_ETH_ACC_MAX_TX_FRAME_DONE_CONSUME_PER_CALLBACK,
-		     qEntryPtr);
-
-#ifndef NDEBUG
-	if (txDoneQReadStatus != IX_QMGR_Q_UNDERFLOW
-	    && (txDoneQReadStatus != IX_SUCCESS))
-	{
-	    /*major error*/
-	    ixEthAccDataStats.unexpectedError++;
-	    IX_ETH_ACC_FATAL_LOG(
-		"ixEthTxFrameDoneQMCallback:Error: %u\n",
-		(UINT32)txDoneQReadStatus, 0, 0, 0, 0, 0);
-	    return;
-	}
-#endif
-
-	qEntry = *qEntryPtr;
-
-	while(qEntry != 0)
-	{
-	    mbufPtr = ixEthAccEntryFromQConvert(qEntry,
-		      IX_ETHNPE_QM_Q_TXENET_ADDR_MASK);
-
-#ifndef NDEBUG
-	    if (mbufPtr == NULL)
-	    {
-		ixEthAccDataStats.unexpectedError++;
-		IX_ETH_ACC_FATAL_LOG(
-		    "ixEthTxFrameDoneQMCallback:Error: Null Mbuf Ptr\n",
-		    0, 0, 0, 0, 0, 0);
-		return;
-	    }
-#endif
-
-	    /* endianness conversions and stats updates */
-	    ixEthAccMbufFromTxQ(mbufPtr);
-
-	    /*
-	     * Get NPE id from message, then convert to portId.
-	     */
-	    npeId = ((IX_ETHNPE_QM_Q_TXENETDONE_NPEID_MASK &
-		       qEntry) >>
-		      IX_ETHNPE_QM_Q_FIELD_NPEID_R);
-	    portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
-
-#ifndef NDEBUG
-	    /* Prudent to at least check the port is within range */
-	    if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
-	    {
-		ixEthAccDataStats.unexpectedError++;
-		IX_ETH_ACC_FATAL_LOG(
-		    "ixEthTxFrameDoneQMCallback: Illegal port: %u\n",
-		    (UINT32)portId, 0, 0, 0, 0, 0);
-		return;
-	    }
-#endif
-
-	    TX_STATS_INC(portId,txDoneClientCallback);
-
-	    /*
-	     * Call user level callback.
-	     */
-	    ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn(
-		ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag,
-		mbufPtr);
-
-	    /* move to next queue entry */
-	    qEntry = *(++qEntryPtr);
-
-	}
-    } while( txDoneQReadStatus == IX_SUCCESS );
-}
-
-IX_ETH_ACC_PUBLIC
-void ixEthAccDataPlaneShow(void)
-{
-    UINT32 numTx0Entries;
-    UINT32 numTx1Entries;
-    UINT32 numTxDoneEntries;
-    UINT32 numRxEntries;
-    UINT32 numRxFree0Entries;
-    UINT32 numRxFree1Entries;
-    UINT32 portId;
-#ifdef __ixp46X
-    UINT32 numTx2Entries;
-    UINT32 numRxFree2Entries;
-#endif
-#ifndef NDEBUG
-    UINT32 priority;
-    UINT32 numBuffersInRx=0;
-    UINT32 numBuffersInTx=0;
-    UINT32 numBuffersInSwQ=0;
-    UINT32 totalBuffers=0;
-    UINT32 rxFreeCallbackCounter = 0;
-    UINT32 txCallbackCounter = 0;
-#endif
-    UINT32 key;
-
-    /* snapshot of stats */
-    IxEthAccTxDataStats tx[IX_ETH_ACC_NUMBER_OF_PORTS];
-    IxEthAccRxDataStats rx[IX_ETH_ACC_NUMBER_OF_PORTS];
-    IxEthAccDataPlaneStats stats;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return;
-    }
-
-    /* get a reliable snapshot */
-    key = ixOsalIrqLock();
-
-    numTx0Entries = 0;
-    ixQMgrQNumEntriesGet(IX_ETH_ACC_TX_FRAME_ENET0_Q, &numTx0Entries);
-    numTx1Entries = 0;
-    ixQMgrQNumEntriesGet(IX_ETH_ACC_TX_FRAME_ENET1_Q, &numTx1Entries);
-    numTxDoneEntries = 0;
-    ixQMgrQNumEntriesGet( IX_ETH_ACC_TX_FRAME_DONE_ETH_Q, &numTxDoneEntries);
-    numRxEntries = 0;
-    ixEthAccQMgrRxQEntryGet(&numRxEntries);
-    numRxFree0Entries = 0;
-    ixQMgrQNumEntriesGet(IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q, &numRxFree0Entries);
-    numRxFree1Entries = 0;
-    ixQMgrQNumEntriesGet(IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q, &numRxFree1Entries);
-
-#ifdef __ixp46X
-    numTx2Entries = 0;
-    ixQMgrQNumEntriesGet(IX_ETH_ACC_TX_FRAME_ENET2_Q, &numTx2Entries);
-    numRxFree2Entries = 0;
-    ixQMgrQNumEntriesGet(IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q, &numRxFree2Entries);
-#endif
-
-    for(portId=IX_ETH_PORT_1; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++)
-    {
-	memcpy(&tx[portId],
-	       &ixEthAccPortData[portId].ixEthAccTxData.stats,
-	       sizeof(tx[portId]));
-	memcpy(&rx[portId],
-	       &ixEthAccPortData[portId].ixEthAccRxData.stats,
-	       sizeof(rx[portId]));
-    }
-    memcpy(&stats, &ixEthAccDataStats, sizeof(stats));
-
-    ixOsalIrqUnlock(key);
-
-#ifdef NDEBUG
-    printf("Detailed statistics collection not supported in this load\n");
-#endif
-
-    /* print snapshot */
-    for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++)
-    {
-        /* If not IXP42X A0 stepping, proceed to check for existence of coprocessors */
-        if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 !=
-	     (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-	    || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-        {
-                if ((IX_ETH_PORT_1 == portId) &&
-                    (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) ==
-                     IX_FEATURE_CTRL_COMPONENT_DISABLED))
-                {
-                   continue ;
-                }
-                if ((IX_ETH_PORT_2 == portId) &&
-                    (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) ==
-                     IX_FEATURE_CTRL_COMPONENT_DISABLED))
-                {
-                    continue ;
-                }
-                if ((IX_ETH_PORT_3 == portId) &&
-                    (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA_ETH) ==
-                     IX_FEATURE_CTRL_COMPONENT_DISABLED))
-                {
-                    continue ;
-                }
-        }
-
-	printf("PORT %u --------------------------------\n",
-	       portId);
-#ifndef NDEBUG
-	printf("Tx Done Frames                : %u\n",
-	       tx[portId].txDoneClientCallback +
-	       tx[portId].txDoneSwQDuringDisable +
-	       tx[portId].txDoneDuringDisable);
-	printf("Tx Frames                     : %u\n",
-	       tx[portId].txQOK + tx[portId].txQDelayed);
-	printf("Tx H/W Q Added OK             : %u\n",
-	       tx[portId].txQOK);
-	printf("Tx H/W Q Delayed              : %u\n",
-	       tx[portId].txQDelayed);
-	printf("Tx From S/W Q Added OK        : %u\n",
-	       tx[portId].txFromSwQOK);
-	printf("Tx From S/W Q Delayed         : %u\n",
-	       tx[portId].txFromSwQDelayed);
-	printf("Tx Overflow                   : %u\n",
-	       tx[portId].txOverflow);
-	printf("Tx Mutual Lock                : %u\n",
-	       tx[portId].txLock);
-	printf("Tx Late Ntf Enabled           : %u\n",
-	       tx[portId].txLateNotificationEnabled);
-	printf("Tx Low Thresh CB              : %u\n",
-	       tx[portId].txLowThreshCallback);
-	printf("Tx Done from H/W Q (Disable)  : %u\n",
-	       tx[portId].txDoneDuringDisable);
-	printf("Tx Done from S/W Q (Disable)  : %u\n",
-	       tx[portId].txDoneSwQDuringDisable);
-	for (priority = IX_ETH_ACC_TX_PRIORITY_0;
-	     priority <= IX_ETH_ACC_TX_PRIORITY_7;
-	     priority++)
-	{
-	    if (tx[portId].txPriority[priority])
-	    {
-		printf("Tx Priority %u                 : %u\n",
-		       priority,
-		       tx[portId].txPriority[priority]);
-	    }
-	}
-#endif
-	printf("Tx unexpected errors          : %u (should be 0)\n",
-	       tx[portId].txUnexpectedError);
-
-#ifndef NDEBUG
-	printf("Rx Frames                     : %u\n",
-	       rx[portId].rxFrameClientCallback +
-	       rx[portId].rxSwQDuringDisable+
-	       rx[portId].rxDuringDisable);
-	printf("Rx Free Replenish             : %u\n",
-	       rx[portId].rxFreeRepOK + rx[portId].rxFreeRepDelayed);
-	printf("Rx Free H/W Q Added OK        : %u\n",
-	       rx[portId].rxFreeRepOK);
-	printf("Rx Free H/W Q Delayed         : %u\n",
-	       rx[portId].rxFreeRepDelayed);
-	printf("Rx Free From S/W Q Added OK   : %u\n",
-	       rx[portId].rxFreeRepFromSwQOK);
-	printf("Rx Free From S/W Q Delayed    : %u\n",
-	       rx[portId].rxFreeRepFromSwQDelayed);
-	printf("Rx Free Overflow              : %u\n",
-	       rx[portId].rxFreeOverflow);
-	printf("Rx Free Mutual Lock           : %u\n",
-	       rx[portId].rxFreeLock);
-	printf("Rx Free Late Ntf Enabled      : %u\n",
-	       rx[portId].rxFreeLateNotificationEnabled);
-	printf("Rx Free Low CB                : %u\n",
-	       rx[portId].rxFreeLowCallback);
-	printf("Rx From H/W Q (Disable)       : %u\n",
-	       rx[portId].rxDuringDisable);
-	printf("Rx From S/W Q (Disable)       : %u\n",
-	       rx[portId].rxSwQDuringDisable);
-	printf("Rx unlearned Mac Address      : %u\n",
-	       rx[portId].rxUnlearnedMacAddress);
-        printf("Rx Filtered (Rx => RxFree)    : %u\n",
-            rx[portId].rxFiltered);
-
-	for (priority = IX_ETH_ACC_TX_PRIORITY_0;
-	     priority <= IX_ETH_ACC_TX_PRIORITY_7;
-	     priority++)
-	{
-	    if (rx[portId].rxPriority[priority])
-	    {
-		printf("Rx Priority %u                 : %u\n",
-		       priority,
-		       rx[portId].rxPriority[priority]);
-	    }
-	}
-#endif
-	printf("Rx unexpected errors          : %u (should be 0)\n",
-	       rx[portId].rxUnexpectedError);
-
-#ifndef NDEBUG
-	numBuffersInTx = tx[portId].txQOK +
-	    tx[portId].txQDelayed -
-	    tx[portId].txDoneClientCallback -
-	    tx[portId].txDoneSwQDuringDisable -
-	    tx[portId].txDoneDuringDisable;
-
-	printf("# Tx Buffers currently for transmission : %u\n",
-	       numBuffersInTx);
-
-	numBuffersInRx = rx[portId].rxFreeRepOK +
-	    rx[portId].rxFreeRepDelayed -
-	    rx[portId].rxFrameClientCallback -
-	    rx[portId].rxSwQDuringDisable -
-	    rx[portId].rxDuringDisable;
-
-	printf("# Rx Buffers currently for reception    : %u\n",
-	       numBuffersInRx);
-
-	totalBuffers += numBuffersInRx + numBuffersInTx;
-#endif
-    }
-
-    printf("---------------------------------------\n");
-
-#ifndef NDEBUG
-    printf("\n");
-    printf("Mbufs :\n");
-    printf("Tx Unchained mbufs            : %u\n",
-	   stats.unchainedTxMBufs);
-    printf("Tx Chained bufs               : %u\n",
-	   stats.chainedTxMBufs);
-    printf("TxDone Unchained mbufs        : %u\n",
-	   stats.unchainedTxDoneMBufs);
-    printf("TxDone Chained bufs           : %u\n",
-	   stats.chainedTxDoneMBufs);
-    printf("RxFree Unchained mbufs        : %u\n",
-	   stats.unchainedRxFreeMBufs);
-    printf("RxFree Chained bufs           : %u\n",
-	   stats.chainedRxFreeMBufs);
-    printf("Rx Unchained mbufs            : %u\n",
-	   stats.unchainedRxMBufs);
-    printf("Rx Chained bufs               : %u\n",
-	   stats.chainedRxMBufs);
-
-    printf("\n");
-    printf("Software queue usage :\n");
-    printf("Buffers added to S/W Q        : %u\n",
-	   stats.addToSwQ);
-    printf("Buffers removed from S/W Q    : %u\n",
-	   stats.removeFromSwQ);
-
-    printf("\n");
-    printf("Hardware queues callbacks :\n");
-
-    for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++)
-    {
-	rxFreeCallbackCounter += rx[portId].rxFreeLowCallback;
-	txCallbackCounter += tx[portId].txLowThreshCallback;
-    }
-    printf("Tx Done QM Callback invoked   : %u\n",
-	   stats.txDoneCallbackCounter);
-    printf("Tx QM Callback invoked        : %u\n",
-	   txCallbackCounter);
-    printf("Rx QM Callback invoked        : %u\n",
-	   stats.rxCallbackCounter);
-    printf("Rx QM Callback burst read     : %u\n",
-	   stats.rxCallbackBurstRead);
-    printf("Rx Free QM Callback invoked   : %u\n",
-	   rxFreeCallbackCounter);
-#endif
-    printf("Unexpected errors in CB       : %u (should be 0)\n",
-	   stats.unexpectedError);
-    printf("\n");
-
-    printf("Hardware queues levels :\n");
-    printf("Transmit Port 1 Q             : %u \n",numTx0Entries);
-    printf("Transmit Port 2 Q             : %u \n",numTx1Entries);
-#ifdef __ixp46X
-    printf("Transmit Port 3 Q             : %u \n",numTx2Entries);
-#endif
-    printf("Transmit Done Q               : %u \n",numTxDoneEntries);
-    printf("Receive Q                     : %u \n",numRxEntries);
-    printf("Receive Free Port 1 Q         : %u \n",numRxFree0Entries);
-    printf("Receive Free Port 2 Q         : %u \n",numRxFree1Entries);
-#ifdef __ixp46X
-    printf("Receive Free Port 3 Q         : %u \n",numRxFree2Entries);
-#endif
-
-#ifndef NDEBUG
-    printf("\n");
-    printf("# Total Buffers accounted for : %u\n",
-	   totalBuffers);
-
-    numBuffersInSwQ = ixEthAccDataStats.addToSwQ -
-	ixEthAccDataStats.removeFromSwQ;
-
-    printf("    Buffers in S/W Qs         : %u\n",
-	   numBuffersInSwQ);
-    printf("    Buffers in H/W Qs or NPEs : %u\n",
-	   totalBuffers - numBuffersInSwQ);
-#endif
-
-    printf("Rx QoS Discipline             : %s\n",
-	   (ixEthAccDataInfo.schDiscipline ==
-	    FIFO_PRIORITY ) ? "Enabled" : "Disabled");
-
-    for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++)
-    {
-	printf("Tx QoS Discipline port %u      : %s\n",
-	       portId,
-	       (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline ==
-		FIFO_PRIORITY ) ? "Enabled" : "Disabled");
-    }
-    printf("\n");
-}
-
-
-
-
-
diff --git a/drivers/net/npe/IxEthAccMac.c b/drivers/net/npe/IxEthAccMac.c
deleted file mode 100644
index 6511344..0000000
--- a/drivers/net/npe/IxEthAccMac.c
+++ /dev/null
@@ -1,2617 +0,0 @@
-/**
- * @file IxEthAccMac.c
- *
- * @author Intel Corporation
- * @date
- *
- * @brief  MAC control functions
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxOsal.h"
-#include "IxNpeMh.h"
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-#include "IxEthDB.h"
-#endif
-#include "IxEthDBPortDefs.h"
-#include "IxEthNpe.h"
-#include "IxEthAcc.h"
-#include "IxEthAccDataPlane_p.h"
-#include "IxEthAcc_p.h"
-#include "IxEthAccMac_p.h"
-
-/* Maximum number of retries during ixEthAccPortDisable, which
- * is approximately 10 seconds
-*/
-#define IX_ETH_ACC_MAX_RETRY 500
-
-/* Maximum number of retries during ixEthAccPortDisable when expecting
- * timeout
- */
-#define IX_ETH_ACC_MAX_RETRY_TIMEOUT 5
-
-#define IX_ETH_ACC_VALIDATE_PORT_ID(portId) \
-    do                                                           \
-    {                                                            \
-        if(!IX_ETH_ACC_IS_PORT_VALID(portId))   \
-        {                                                        \
-	    return IX_ETH_ACC_INVALID_PORT;                      \
-        }                                                        \
-    } while(0)
-
-PUBLIC IxEthAccMacState ixEthAccMacState[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-PRIVATE UINT32 ixEthAccMacBase[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-/*Forward function declarations*/
-PRIVATE void
-ixEthAccPortDisableRx (IxEthAccPortId portId,
-		       IX_OSAL_MBUF * mBufPtr,
-		       BOOL useMultiBufferCallback);
-
-PRIVATE void
-ixEthAccPortDisableRxAndReplenish (IxEthAccPortId portId,
-				   IX_OSAL_MBUF * mBufPtr,
-				   BOOL useMultiBufferCallback);
-
-PRIVATE void
-ixEthAccPortDisableTxDone (UINT32 cbTag,
-			   IX_OSAL_MBUF *mbuf);
-
-PRIVATE void
-ixEthAccPortDisableTxDoneAndSubmit (UINT32 cbTag,
-				    IX_OSAL_MBUF *mbuf);
-
-PRIVATE void
-ixEthAccPortDisableRxCallback (UINT32 cbTag,
-			       IX_OSAL_MBUF * mBufPtr,
-			       UINT32 learnedPortId);
-
-PRIVATE void
-ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag,
-					  IX_OSAL_MBUF **mBufPtr);
-
-PRIVATE IxEthAccStatus
-ixEthAccPortDisableTryTransmit(UINT32 portId);
-
-PRIVATE IxEthAccStatus
-ixEthAccPortDisableTryReplenish(UINT32 portId);
-
-PRIVATE IxEthAccStatus
-ixEthAccPortMulticastMacAddressGet (IxEthAccPortId portId,
-				    IxEthAccMacAddr *macAddr);
-
-PRIVATE IxEthAccStatus
-ixEthAccPortMulticastMacFilterGet (IxEthAccPortId portId,
-				   IxEthAccMacAddr *macAddr);
-
-PRIVATE void
-ixEthAccMacNpeStatsMessageCallback (IxNpeMhNpeId npeId,
-				    IxNpeMhMessage msg);
-
-PRIVATE void
-ixEthAccMacNpeStatsResetMessageCallback (IxNpeMhNpeId npeId,
-					 IxNpeMhMessage msg);
-
-PRIVATE void
-ixEthAccNpeLoopbackMessageCallback (IxNpeMhNpeId npeId,
-				    IxNpeMhMessage msg);
-
-PRIVATE void
-ixEthAccMulticastAddressSet(IxEthAccPortId portId);
-
-PRIVATE BOOL
-ixEthAccMacEqual(IxEthAccMacAddr *macAddr1,
-		 IxEthAccMacAddr *macAddr2);
-
-PRIVATE void
-ixEthAccMacPrint(IxEthAccMacAddr *m);
-
-PRIVATE void
-ixEthAccMacStateUpdate(IxEthAccPortId portId);
-
-IxEthAccStatus
-ixEthAccMacMemInit(void)
-{
-    ixEthAccMacBase[IX_ETH_PORT_1] =
-	(UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_0_BASE,
-				 IX_OSAL_IXP400_ETHA_MAP_SIZE);
-    ixEthAccMacBase[IX_ETH_PORT_2] =
-	(UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_1_BASE,
-				 IX_OSAL_IXP400_ETHB_MAP_SIZE);
-#ifdef __ixp46X
-    ixEthAccMacBase[IX_ETH_PORT_3] =
-	(UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_2_BASE,
-				 IX_OSAL_IXP400_ETH_NPEA_MAP_SIZE);
-    if (ixEthAccMacBase[IX_ETH_PORT_3] == 0)
-    {
-	ixOsalLog(IX_OSAL_LOG_LVL_FATAL,
-		  IX_OSAL_LOG_DEV_STDOUT,
-		  "EthAcc: Could not map MAC I/O memory\n",
-		  0, 0, 0, 0, 0 ,0);
-
-	return IX_ETH_ACC_FAIL;
-    }
-#endif
-
-    if (ixEthAccMacBase[IX_ETH_PORT_1] == 0
-	|| ixEthAccMacBase[IX_ETH_PORT_2] == 0)
-    {
-	ixOsalLog(IX_OSAL_LOG_LVL_FATAL,
-		  IX_OSAL_LOG_DEV_STDOUT,
-		  "EthAcc: Could not map MAC I/O memory\n",
-		  0, 0, 0, 0, 0 ,0);
-
-	return IX_ETH_ACC_FAIL;
-    }
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-void
-ixEthAccMacUnload(void)
-{
-    IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_1]);
-    IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_2]);
-#ifdef __ixp46X
-    IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_3]);
-    ixEthAccMacBase[IX_ETH_PORT_3] = 0;
-#endif
-    ixEthAccMacBase[IX_ETH_PORT_2] = 0;
-    ixEthAccMacBase[IX_ETH_PORT_1] = 0;
-}
-
-IxEthAccStatus
-ixEthAccPortEnablePriv(IxEthAccPortId portId)
-{
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-        printf("EthAcc: (Mac) cannot enable port %d, port not initialized\n", portId);
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    if (ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn == NULL)
-    {
-        /* TxDone callback not registered */
-        printf("EthAcc: (Mac) cannot enable port %d, TxDone callback not registered\n", portId);
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    if ((ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn == NULL)
-	&& (ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn == NULL))
-    {
-        /* Receive callback not registered */
-        printf("EthAcc: (Mac) cannot enable port %d, Rx callback not registered\n", portId);
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    if(!ixEthAccMacState[portId].initDone)
-    {
-        printf("EthAcc: (Mac) cannot enable port %d, MAC address not set\n", portId);
-	return (IX_ETH_ACC_MAC_UNINITIALIZED);
-    }
-
-    /* if the state is being set to what it is already at, do nothing*/
-    if (ixEthAccMacState[portId].enabled)
-    {
-        return IX_ETH_ACC_SUCCESS;
-    }
-
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-    /* enable ethernet database for this port */
-    if (ixEthDBPortEnable(portId) != IX_ETH_DB_SUCCESS)
-    {
-        printf("EthAcc: (Mac) cannot enable port %d, EthDB failure\n", portId);
-        return IX_ETH_ACC_FAIL;
-    }
-#endif
-
-    /* set the MAC core registers */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL2,
-	      IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RANDOM_SEED,
-	      IX_ETH_ACC_RANDOM_SEED_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_THRESH_P_EMPTY,
-	      IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_THRESH_P_FULL,
-	      IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_DEFER,
-	      IX_ETH_ACC_MAC_TX_DEFER_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_TWO_DEFER_1,
-	      IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_TWO_DEFER_2,
-	      IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_SLOT_TIME,
-	      IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH,
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_BUF_SIZE_TX,
-	      IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      IX_ETH_ACC_TX_CNTRL1_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      IX_ETH_ACC_RX_CNTRL1_DEFAULT);
-
-    /* set the global state */
-    ixEthAccMacState[portId].portDisableState = ACTIVE;
-    ixEthAccMacState[portId].enabled = true;
-
-    /* rewrite the setup (including mac filtering) depending
-     * on current options
-     */
-    ixEthAccMacStateUpdate(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-/*
- * PortDisable local variables. They contain the intermediate steps
- * while the port is being disabled and the buffers being drained out
- * of the NPE.
- */
-typedef void (*IxEthAccPortDisableRx)(IxEthAccPortId portId,
-				      IX_OSAL_MBUF * mBufPtr,
-				      BOOL useMultiBufferCallback);
-static IxEthAccPortRxCallback
-ixEthAccPortDisableFn[IX_ETH_ACC_NUMBER_OF_PORTS];
-static IxEthAccPortMultiBufferRxCallback
-ixEthAccPortDisableMultiBufferFn[IX_ETH_ACC_NUMBER_OF_PORTS];
-static IxEthAccPortDisableRx
-ixEthAccPortDisableRxTable[IX_ETH_ACC_NUMBER_OF_PORTS];
-static UINT32
-ixEthAccPortDisableCbTag[IX_ETH_ACC_NUMBER_OF_PORTS];
-static UINT32
-ixEthAccPortDisableMultiBufferCbTag[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-static IxEthAccPortTxDoneCallback
-ixEthAccPortDisableTxDoneFn[IX_ETH_ACC_NUMBER_OF_PORTS];
-static UINT32
-ixEthAccPortDisableTxDoneCbTag[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-static UINT32
-ixEthAccPortDisableUserBufferCount[IX_ETH_ACC_NUMBER_OF_PORTS];
-
-/*
- * PortDisable private callbacks functions. They handle the user
- * traffic, and the special buffers (one for tx, one for rx) used
- * in portDisable.
- */
-PRIVATE void
-ixEthAccPortDisableTxDone(UINT32 cbTag,
-			  IX_OSAL_MBUF *mbuf)
-{
-    IxEthAccPortId portId = (IxEthAccPortId)cbTag;
-    volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState;
-
-    /* check for the special mbuf used in portDisable */
-    if (mbuf == ixEthAccMacState[portId].portDisableTxMbufPtr)
-    {
-        *txState = TRANSMIT_DONE;
-    }
-    else
-    {
-	/* increment the count of user traffic during portDisable */
-	ixEthAccPortDisableUserBufferCount[portId]++;
-
-       /* call client TxDone function */
-        ixEthAccPortDisableTxDoneFn[portId](ixEthAccPortDisableTxDoneCbTag[portId], mbuf);
-    }
-}
-
-PRIVATE IxEthAccStatus
-ixEthAccPortDisableTryTransmit(UINT32 portId)
-{
-    int key;
-    IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
-    volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState;
-    /* transmit the special buffer again if it is transmitted
-     * and update the txState
-     * This section is protected because the portDisable context
-     * run an identical code, so the system keeps transmitting at the
-     * maximum rate.
-     */
-    key = ixOsalIrqLock();
-    if (*txState == TRANSMIT_DONE)
-    {
-	IX_OSAL_MBUF *mbufTxPtr = ixEthAccMacState[portId].portDisableTxMbufPtr;
-	*txState = TRANSMIT;
-	status = ixEthAccPortTxFrameSubmit(portId,
-					   mbufTxPtr,
-					   IX_ETH_ACC_TX_DEFAULT_PRIORITY);
-    }
-    ixOsalIrqUnlock(key);
-
-    return status;
-}
-
-PRIVATE void
-ixEthAccPortDisableTxDoneAndSubmit(UINT32 cbTag,
-				   IX_OSAL_MBUF *mbuf)
-{
-    IxEthAccPortId portId = (IxEthAccPortId)cbTag;
-
-    /* call the callback which forwards the traffic to the client */
-    ixEthAccPortDisableTxDone(cbTag, mbuf);
-
-    /* try to transmit the buffer used in portDisable
-     * if seen in TxDone
-     */
-    ixEthAccPortDisableTryTransmit(portId);
-}
-
-PRIVATE void
-ixEthAccPortDisableRx (IxEthAccPortId portId,
-		       IX_OSAL_MBUF * mBufPtr,
-		       BOOL useMultiBufferCallback)
-{
-    volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState;
-    IX_OSAL_MBUF *mNextPtr;
-
-    while (mBufPtr)
-    {
-	mNextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mBufPtr);
-	IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mBufPtr) = NULL;
-
-	/* check for the special mbuf used in portDisable */
-	if (mBufPtr == ixEthAccMacState[portId].portDisableRxMbufPtr)
-	{
-            *rxState = RECEIVE;
-	}
-	else
-	{
-	    /* increment the count of user traffic during portDisable */
-	    ixEthAccPortDisableUserBufferCount[portId]++;
-
-	    /* reset the received payload length during portDisable */
-	    IX_OSAL_MBUF_MLEN(mBufPtr)    = 0;
-	    IX_OSAL_MBUF_PKT_LEN(mBufPtr) = 0;
-
-	    if (useMultiBufferCallback)
-	    {
-		/* call the user callback with one unchained
-		 * buffer, without payload. A small array is built
-		 * to be used as a parameter (the user callback expects
-		 * to receive an array ended by a NULL pointer.
-		 */
-		IX_OSAL_MBUF *mBufPtrArray[2];
-
-		mBufPtrArray[0] = mBufPtr;
-		mBufPtrArray[1] = NULL;
-		ixEthAccPortDisableMultiBufferFn[portId](
-			 ixEthAccPortDisableMultiBufferCbTag[portId],
-			 mBufPtrArray);
-	    }
-	    else
-	    {
-		/* call the user callback with a unchained
-		 * buffer, without payload and the destination port is
-		 * unknown.
-		 */
-		ixEthAccPortDisableFn[portId](
-		      ixEthAccPortDisableCbTag[portId],
-		      mBufPtr,
-		      IX_ETH_DB_UNKNOWN_PORT /* port not found */);
-	    }
-        }
-
-        mBufPtr = mNextPtr;
-    }
-}
-
-PRIVATE IxEthAccStatus
-ixEthAccPortDisableTryReplenish(UINT32 portId)
-{
-    int key;
-    IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
-    volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState;
-    /* replenish with the special buffer again if it is received
-     * and update the rxState
-     * This section is protected because the portDisable context
-     * run an identical code, so the system keeps replenishing at the
-     * maximum rate.
-     */
-    key = ixOsalIrqLock();
-    if (*rxState == RECEIVE)
-    {
-	IX_OSAL_MBUF *mbufRxPtr = ixEthAccMacState[portId].portDisableRxMbufPtr;
-	*rxState = REPLENISH;
-	IX_OSAL_MBUF_MLEN(mbufRxPtr) = IX_ETHACC_RX_MBUF_MIN_SIZE;
-	status = ixEthAccPortRxFreeReplenish(portId, mbufRxPtr);
-    }
-    ixOsalIrqUnlock(key);
-
-    return status;
-}
-
-PRIVATE void
-ixEthAccPortDisableRxAndReplenish (IxEthAccPortId portId,
-				   IX_OSAL_MBUF * mBufPtr,
-				   BOOL useMultiBufferCallback)
-{
-    /* call the callback which forwards the traffic to the client */
-    ixEthAccPortDisableRx(portId, mBufPtr, useMultiBufferCallback);
-
-    /* try to replenish with the buffer used in portDisable
-     * if seen in Rx
-     */
-    ixEthAccPortDisableTryReplenish(portId);
-}
-
-PRIVATE void
-ixEthAccPortDisableRxCallback (UINT32 cbTag,
-			       IX_OSAL_MBUF * mBufPtr,
-			       UINT32 learnedPortId)
-{
-    IxEthAccPortId portId = (IxEthAccPortId)cbTag;
-
-    /* call the portDisable receive callback */
-   (ixEthAccPortDisableRxTable[portId])(portId, mBufPtr, false);
-}
-
-PRIVATE void
-ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag,
-					  IX_OSAL_MBUF **mBufPtr)
-{
-    IxEthAccPortId portId = (IxEthAccPortId)cbTag;
-
-    while (*mBufPtr)
-    {
-	/* call the portDisable receive callback with one buffer at a time */
-	(ixEthAccPortDisableRxTable[portId])(portId, *mBufPtr++, true);
-    }
-}
-
-IxEthAccStatus
-ixEthAccPortDisablePriv(IxEthAccPortId portId)
-{
-    IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
-    int key;
-    int retry, retryTimeout;
-    volatile IxEthAccPortDisableState *state = &ixEthAccMacState[portId].portDisableState;
-    volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState;
-    volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable port.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* if the state is being set to what it is already at, do nothing */
-    if (!ixEthAccMacState[portId].enabled)
-    {
-        return IX_ETH_ACC_SUCCESS;
-    }
-
-    *state = DISABLED;
-
-    /* disable MAC receive first */
-    ixEthAccPortRxDisablePriv(portId);
-
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-    /* disable ethernet database for this port - It is done now to avoid
-     * issuing ELT maintenance after requesting 'port disable' in an NPE
-     */
-    if (ixEthDBPortDisable(portId) != IX_ETH_DB_SUCCESS)
-    {
-	status = IX_ETH_ACC_FAIL;
-        IX_ETH_ACC_FATAL_LOG("ixEthAccPortDisable: failed to disable EthDB for this port\n", 0, 0, 0, 0, 0, 0);
-    }
-#endif
-
-    /* enter the critical section */
-    key = ixOsalIrqLock();
-
-    /* swap the Rx and TxDone callbacks */
-    ixEthAccPortDisableFn[portId]            = ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn;
-    ixEthAccPortDisableMultiBufferFn[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn;
-    ixEthAccPortDisableCbTag[portId]         = ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag;
-    ixEthAccPortDisableMultiBufferCbTag[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag;
-    ixEthAccPortDisableTxDoneFn[portId]      = ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn;
-    ixEthAccPortDisableTxDoneCbTag[portId]   = ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag;
-    ixEthAccPortDisableRxTable[portId]       =  ixEthAccPortDisableRx;
-
-    /* register temporary callbacks */
-    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn            = ixEthAccPortDisableRxCallback;
-    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag           = portId;
-
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = ixEthAccPortDisableMultiBufferRxCallback;
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = portId;
-
-    ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn  = ixEthAccPortDisableTxDone;
-    ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag           = portId;
-
-    /* initialise the Rx state and Tx states */
-    *txState = TRANSMIT_DONE;
-    *rxState = RECEIVE;
-
-    /* exit the critical section */
-    ixOsalIrqUnlock(key);
-
-    /* enable a NPE loopback */
-    if (ixEthAccNpeLoopbackEnablePriv(portId) != IX_ETH_ACC_SUCCESS)
-    {
-	status = IX_ETH_ACC_FAIL;
-    }
-
-    if (status == IX_ETH_ACC_SUCCESS)
-    {
-	retry = 0;
-
-	/* Step 1 : Drain Tx traffic and TxDone queues :
-	 *
-	 * Transmit and replenish at least once with the
-	 * special buffers until both of them are seen
-	 * in the callback hook
-	 *
-	 * (the receive callback keeps replenishing, so once we see
-	 * the special Tx buffer, we can be sure that Tx drain is complete)
-	 */
-	ixEthAccPortDisableRxTable[portId]
-	    =  ixEthAccPortDisableRxAndReplenish;
-	ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn
-	    = ixEthAccPortDisableTxDone;
-
-	do
-	{
-	    /* keep replenishing */
-	    status = ixEthAccPortDisableTryReplenish(portId);
-	    if (status == IX_ETH_ACC_SUCCESS)
-	    {
-		/* keep transmitting */
-		status = ixEthAccPortDisableTryTransmit(portId);
-	    }
-	    if (status == IX_ETH_ACC_SUCCESS)
-	    {
-		/* wait for some traffic being processed */
-		ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
-	    }
-	}
-	while ((status == IX_ETH_ACC_SUCCESS)
-	       && (retry++ < IX_ETH_ACC_MAX_RETRY)
-	       && (*txState == TRANSMIT));
-
-	/* Step 2 : Drain Rx traffic, RxFree and Rx queues :
-	 *
-	 * Transmit and replenish at least once with the
-	 * special buffers until both of them are seen
-	 * in the callback hook
-	 * (the transmit callback keeps transmitting, and when we see
-	 * the special Rx buffer, we can be sure that rxFree drain
-	 * is complete)
-	 *
-	 * The nested loop helps to retry if the user was keeping
-	 * replenishing or transmitting during portDisable.
-	 *
-	 * The 2 nested loops ensure more retries if user traffic is
-	 * seen during portDisable : the user should not replenish
-	 * or transmit while portDisable is running. However, because of
-	 * the queueing possibilities in ethAcc dataplane, it is possible
-	 * that a lot of traffic is left in the queues (e.g. when
-	 * transmitting over a low speed link) and therefore, more
-	 * retries are allowed to help flushing the buffers out.
-	 */
-	ixEthAccPortDisableRxTable[portId]
-	    =  ixEthAccPortDisableRx;
-	ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn
-	    = ixEthAccPortDisableTxDoneAndSubmit;
-
-	do
-	{
-	    do
-	    {
-		ixEthAccPortDisableUserBufferCount[portId] = 0;
-
-		/* keep replenishing */
-		status = ixEthAccPortDisableTryReplenish(portId);
-		if (status == IX_ETH_ACC_SUCCESS)
-		{
-		    /* keep transmitting */
-		    status = ixEthAccPortDisableTryTransmit(portId);
-		}
-		if (status == IX_ETH_ACC_SUCCESS)
-		{
-		    /* wait for some traffic being processed */
-		    ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
-		}
-	    }
-	    while ((status == IX_ETH_ACC_SUCCESS)
-		   && (retry++ < IX_ETH_ACC_MAX_RETRY)
-		   && ((ixEthAccPortDisableUserBufferCount[portId] != 0)
-		       || (*rxState == REPLENISH)));
-
-	    /* After the first iteration, change the receive callbacks,
-	     * to process only 1 buffer at a time
-	     */
-	    ixEthAccPortDisableRxTable[portId]
-		= ixEthAccPortDisableRx;
-	    ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn
-		= ixEthAccPortDisableTxDone;
-
-	    /* repeat the whole process while user traffic is seen in TxDone
-	     *
-	     * The conditions to stop the loop are
-	     * - Xscale has both Rx and Tx special buffers
-	     *   (txState = transmit, rxState = receive)
-	     * - any error in txSubmit or rxReplenish
-	     * - no user traffic seen
-	     * - an excessive amount of retries
-	     */
-	}
-	while ((status == IX_ETH_ACC_SUCCESS)
-	       && (retry < IX_ETH_ACC_MAX_RETRY)
-	       && (*txState == TRANSMIT));
-
-	/* check the loop exit conditions. The NPE should not hold
-	 * the special buffers.
-	 */
-	if ((*rxState == REPLENISH) || (*txState == TRANSMIT))
-	{
-	    status = IX_ETH_ACC_FAIL;
-	}
-
-	if (status == IX_ETH_ACC_SUCCESS)
-	{
-	    /* Step 3 : Replenish without transmitting until a timeout
-	     * occurs, in order to drain the internal NPE fifos
-	     *
-	     * we can expect a few frames srill held
-	     * in the NPE.
-	     *
-	     * The 2 nested loops take care about the NPE dropping traffic
-	     * (including loopback traffic) when the Rx queue is full.
-	     *
-	     * The timeout value is very conservative
-	     * since the loopback used keeps replenishhing.
-	     *
-	     */
-	    do
-	    {
-		ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRxAndReplenish;
-		ixEthAccPortDisableUserBufferCount[portId] = 0;
-		retryTimeout = 0;
-		do
-		{
-		    /* keep replenishing */
-		    status = ixEthAccPortDisableTryReplenish(portId);
-		    if (status == IX_ETH_ACC_SUCCESS)
-		    {
-			/* wait for some traffic being processed */
-			ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
-		    }
-		}
-		while ((status == IX_ETH_ACC_SUCCESS)
-		       && (retryTimeout++ < IX_ETH_ACC_MAX_RETRY_TIMEOUT));
-
-		/* Step 4 : Transmit once. Stop replenish
-		 *
-		 * After the Rx timeout, we are sure that the NPE does not
-		 * hold any frame in its internal NPE fifos.
-		 *
-		 * At this point, the NPE still holds the last rxFree buffer.
-		 * By transmitting a single frame, this should unblock the
-		 * last rxFree buffer. This code just transmit once and
-		 * wait for both frames seen in TxDone and in rxFree.
-		 *
-		 */
-		ixEthAccPortDisableRxTable[portId] =  ixEthAccPortDisableRx;
-		status = ixEthAccPortDisableTryTransmit(portId);
-
-		/* the NPE should immediatelyt release
-		 * the last Rx buffer and the last transmitted buffer
-		 * unless the last Tx frame was dropped (rx queue full)
-		 */
-		if (status == IX_ETH_ACC_SUCCESS)
-		{
-		    retryTimeout = 0;
-		    do
-		    {
-			ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS);
-		    }
-		    while ((*rxState == REPLENISH)
-			   && (retryTimeout++ < IX_ETH_ACC_MAX_RETRY_TIMEOUT));
-		}
-
-		/* the NPE may have dropped the traffic because of Rx
-		 * queue being full. This code ensures that the last
-		 * Tx and Rx frames are both received.
-		 */
-	    }
-	    while ((status == IX_ETH_ACC_SUCCESS)
-		   && (retry++ < IX_ETH_ACC_MAX_RETRY)
-		   && ((*txState == TRANSMIT)
-		       || (*rxState == REPLENISH)
-		       || (ixEthAccPortDisableUserBufferCount[portId] != 0)));
-
-	    /* Step 5 : check the final states : the NPE has
-	     * no buffer left, nor in Tx , nor in Rx directions.
-	     */
-	    if ((*rxState == REPLENISH) || (*txState == TRANSMIT))
-	    {
-		status = IX_ETH_ACC_FAIL;
-	    }
-	}
-
-        /* now all the buffers are drained, disable NPE loopback
-	 * This is done regardless of the logic to drain the queues and
-	 * the internal buffers held by the NPE.
-	 */
-	if (ixEthAccNpeLoopbackDisablePriv(portId) != IX_ETH_ACC_SUCCESS)
-	{
-	    status = IX_ETH_ACC_FAIL;
-	}
-    }
-
-    /* disable MAC Tx and Rx services */
-    ixEthAccMacState[portId].enabled = false;
-    ixEthAccMacStateUpdate(portId);
-
-    /* restore the Rx and TxDone callbacks (within a critical section) */
-    key = ixOsalIrqLock();
-
-    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn            = ixEthAccPortDisableFn[portId];
-    ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag           = ixEthAccPortDisableCbTag[portId];
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = ixEthAccPortDisableMultiBufferFn[portId];
-    ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = ixEthAccPortDisableMultiBufferCbTag[portId];
-    ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn  = ixEthAccPortDisableTxDoneFn[portId];
-    ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag           = ixEthAccPortDisableTxDoneCbTag[portId];
-
-    ixOsalIrqUnlock(key);
-
-    /* the MAC core rx/tx disable may left the MAC hardware in an
-     * unpredictable state. A hw reset is executed before resetting
-     * all the MAC parameters to a known value.
-     */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_RESET);
-
-    ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY);
-
-    /* rewrite all parameters to their current value */
-    ixEthAccMacStateUpdate(portId);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH,
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_MDC_EN);
-
-    return status;
-}
-
-IxEthAccStatus
-ixEthAccPortEnabledQueryPriv(IxEthAccPortId portId, BOOL *enabled)
-{
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0);
-
-        /* Since Eth NPE is not available, port must be disabled */
-        *enabled = false ;
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-        /* Since Eth NPE is not available, port must be disabled */
-        *enabled = false ;
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    *enabled = ixEthAccMacState[portId].enabled;
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortMacResetPriv(IxEthAccPortId portId)
-{
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot reset Ethernet coprocessor.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_RESET);
-
-    ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY);
-
-    /* rewrite all parameters to their current value */
-    ixEthAccMacStateUpdate(portId);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH,
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_MDC_EN);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortLoopbackEnable(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable loopback.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* read register */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    /* update register */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval | IX_ETH_ACC_RX_CNTRL1_LOOP_EN);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-PRIVATE void
-ixEthAccNpeLoopbackMessageCallback (IxNpeMhNpeId npeId,
-				    IxNpeMhMessage msg)
-{
-    IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
-
-#ifndef NDEBUG
-    /* Prudent to at least check the port is within range */
-    if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
-    {
-	IX_ETH_ACC_FATAL_LOG("IXETHACC:ixEthAccPortDisableMessageCallback: Illegal port: %u\n",
-            (UINT32) portId, 0, 0, 0, 0, 0);
-
-	return;
-    }
-#endif
-
-    /* unlock message reception mutex */
-    ixOsalMutexUnlock(&ixEthAccMacState[portId].npeLoopbackMessageLock);
-}
-
-IxEthAccStatus
-ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId)
-{
-    IX_STATUS npeMhStatus;
-    IxNpeMhMessage message;
-    IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable NPE loopback.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* enable NPE loopback (lsb of the message contains the value 1) */
-    message.data[0] = (IX_ETHNPE_SETLOOPBACK_MODE << IX_ETH_ACC_MAC_MSGID_SHL)
-	| 0x01;
-    message.data[1] = 0;
-
-    npeMhStatus = ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
-		message,
-		IX_ETHNPE_SETLOOPBACK_MODE_ACK,
-		ixEthAccNpeLoopbackMessageCallback,
-		IX_NPEMH_SEND_RETRIES_DEFAULT);
-
-    if (npeMhStatus != IX_SUCCESS)
-    {
-        status = IX_ETH_ACC_FAIL;
-    }
-    else
-    {
-	/* wait for NPE loopbackEnable response */
-        if (ixOsalMutexLock(&ixEthAccMacState[portId]. npeLoopbackMessageLock,
-			    IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS)
-	    != IX_SUCCESS)
-        {
-            status = IX_ETH_ACC_FAIL;
-        }
-    }
-
-    return status;
-}
-
-IxEthAccStatus
-ixEthAccPortTxEnablePriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable TX.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* read register */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    /* update register */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      regval | IX_ETH_ACC_TX_CNTRL1_TX_EN);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortRxEnablePriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable RX.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* read register */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    /* update register */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval | IX_ETH_ACC_RX_CNTRL1_RX_EN);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortLoopbackDisable(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable loopback.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*disable MAC loopabck */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      (regval & ~IX_ETH_ACC_RX_CNTRL1_LOOP_EN));
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId)
-{
-    IX_STATUS npeMhStatus;
-    IxNpeMhMessage message;
-    IxEthAccStatus status = IX_ETH_ACC_SUCCESS;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable NPE loopback.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* disable NPE loopback (lsb of the message contains the value 0) */
-    message.data[0] = (IX_ETHNPE_SETLOOPBACK_MODE << IX_ETH_ACC_MAC_MSGID_SHL);
-    message.data[1] = 0;
-
-    npeMhStatus = ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
-		message,
-		IX_ETHNPE_SETLOOPBACK_MODE_ACK,
-		ixEthAccNpeLoopbackMessageCallback,
-		IX_NPEMH_SEND_RETRIES_DEFAULT);
-
-    if (npeMhStatus != IX_SUCCESS)
-    {
-        status = IX_ETH_ACC_FAIL;
-    }
-    else
-    {
-	/* wait for NPE loopbackEnable response */
-        if (ixOsalMutexLock(&ixEthAccMacState[portId].npeLoopbackMessageLock,
-			    IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS)
-	    != IX_SUCCESS)
-        {
-            status = IX_ETH_ACC_FAIL;
-        }
-    }
-
-    return status;
-}
-
-IxEthAccStatus
-ixEthAccPortTxDisablePriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable TX.\n", (INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* read register */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    /* update register */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      (regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN));
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortRxDisablePriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable RX.\n", (INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* read register */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    /* update register */
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      (regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN));
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortPromiscuousModeClearPriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /* Turn off promiscuous mode */
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot clear promiscuous mode.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*set bit 5 of Rx control 1 - enable address filtering*/
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN);
-
-    ixEthAccMacState[portId].promiscuous = false;
-
-    ixEthAccMulticastAddressSet(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortPromiscuousModeSetPriv(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set promiscuous mode.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*
-     * Set bit 5 of Rx control 1 - We enable address filtering even in
-     * promiscuous mode because we want the MAC to set the appropriate
-     * bits in m_flags which doesn't happen if we turn off filtering.
-     */
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN);
-
-    ixEthAccMacState[portId].promiscuous = true;
-
-    ixEthAccMulticastAddressSet(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortUnicastMacAddressSetPriv (IxEthAccPortId portId,
-				  IxEthAccMacAddr *macAddr)
-{
-    UINT32 i;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set Unicast Mac Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-
-    if (macAddr == NULL)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    if ( macAddr->macAddress[0] & IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT )
-    {
-	/* This is a multicast/broadcast address cant set it ! */
-	return IX_ETH_ACC_FAIL;
-    }
-
-    if ( macAddr->macAddress[0] == 0 &&
-	 macAddr->macAddress[1] == 0 &&
-	 macAddr->macAddress[2] == 0 &&
-	 macAddr->macAddress[3] == 0 &&
-	 macAddr->macAddress[4] == 0 &&
-	 macAddr->macAddress[5] == 0  )
-    {
-	/* This is an invalid mac address cant set it ! */
-	return IX_ETH_ACC_FAIL;
-    }
-
-#ifdef CONFIG_IXP425_COMPONENT_ETHDB
-    /* update the MAC address in the ethernet database */
-    if (ixEthDBPortAddressSet(portId, (IxEthDBMacAddr *) macAddr) != IX_ETH_DB_SUCCESS)
-    {
-        return IX_ETH_ACC_FAIL;
-    }
-#endif
-
-    /*Set the Unicast MAC to the specified value*/
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-    {
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_UNI_ADDR_1 + i*sizeof(UINT32),
-		  macAddr->macAddress[i]);
-    }
-    ixEthAccMacState[portId].initDone = true;
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortUnicastMacAddressGetPriv (IxEthAccPortId portId,
-				  IxEthAccMacAddr *macAddr)
-{
-    /*Return the current value of the Unicast MAC from h/w
-      for the specified port*/
-    UINT32 i;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get Unicast Mac Address.\n",(INT32)portId,0,0,0,0,0);
-        /* Since Eth Npe is unavailable, return invalid MAC Address = 00:00:00:00:00:00 */
-        for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-        {
-	    macAddr->macAddress[i] = 0;
-        }
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if(!ixEthAccMacState[portId].initDone)
-    {
-	return (IX_ETH_ACC_MAC_UNINITIALIZED);
-    }
-
-    if (macAddr == NULL)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-    {
-	REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_UNI_ADDR_1 + i*sizeof(UINT32),
-		 macAddr->macAddress[i]);
-    }
-    return IX_ETH_ACC_SUCCESS;
-}
-
-PRIVATE IxEthAccStatus
-ixEthAccPortMulticastMacAddressGet (IxEthAccPortId portId,
-				    IxEthAccMacAddr *macAddr)
-{
-    /*Return the current value of the Multicast MAC from h/w
-      for the specified port*/
-    UINT32 i;
-
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-    {
-
-	REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_ADDR_1 + i*sizeof(UINT32),
-		 macAddr->macAddress[i]);
-    }
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-PRIVATE IxEthAccStatus
-ixEthAccPortMulticastMacFilterGet (IxEthAccPortId portId,
-				   IxEthAccMacAddr *macAddr)
-{
-    /*Return the current value of the Multicast MAC from h/w
-      for the specified port*/
-    UINT32 i;
-
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-    {
-
-	REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_ADDR_MASK_1 + i*sizeof(UINT32),
-		 macAddr->macAddress[i]);
-    }
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortMulticastAddressJoinPriv (IxEthAccPortId portId,
-				  IxEthAccMacAddr *macAddr)
-{
-    UINT32 i;
-    IxEthAccMacAddr broadcastAddr = {{0xff,0xff,0xff,0xff,0xff,0xff}};
-
-    /*Check that the port parameter is valid*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot join Multicast Mac Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*Check that the mac address is valid*/
-    if(macAddr == NULL)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /* Check that this is a multicast address */
-    if (!(macAddr->macAddress[0] & IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT))
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /* We don't add the Broadcast address */
-    if(ixEthAccMacEqual(&broadcastAddr, macAddr))
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    for (i = 0;
-	 i<ixEthAccMacState[portId].mcastAddrIndex;
-	 i++)
-    {
-	/*Check if the current entry already match an existing matches*/
-	if(ixEthAccMacEqual(&ixEthAccMacState[portId].mcastAddrsTable[i], macAddr))
-	{
-	    /* Address found in the list and already configured,
-	     * return a success status
-	     */
-	    return IX_ETH_ACC_SUCCESS;
-	}
-    }
-
-    /* check for availability at the end of the current table */
-    if(ixEthAccMacState[portId].mcastAddrIndex >= IX_ETH_ACC_MAX_MULTICAST_ADDRESSES)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /*First add the address to the multicast table for the
-      specified port*/
-    i=ixEthAccMacState[portId].mcastAddrIndex;
-
-    memcpy(&ixEthAccMacState[portId].mcastAddrsTable[i],
-	   &macAddr->macAddress,
-	   IX_IEEE803_MAC_ADDRESS_SIZE);
-
-    /*Increment the index into the table, this must be done here
-     as MulticastAddressSet below needs to know about the latest
-     entry.
-    */
-    ixEthAccMacState[portId].mcastAddrIndex++;
-
-    /*Then calculate the new value to be written to the address and
-      address mask registers*/
-    ixEthAccMulticastAddressSet(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-IxEthAccStatus
-ixEthAccPortMulticastAddressJoinAllPriv (IxEthAccPortId portId)
-{
-    IxEthAccMacAddr mcastMacAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}};
-
-    /*Check that the port parameter is valid*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot join all Multicast Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /* remove all entries from the database and
-    *  insert a multicast entry
-    */
-    memcpy(&ixEthAccMacState[portId].mcastAddrsTable[0],
-	   &mcastMacAddr.macAddress,
-	   IX_IEEE803_MAC_ADDRESS_SIZE);
-
-    ixEthAccMacState[portId].mcastAddrIndex = 1;
-    ixEthAccMacState[portId].joinAll = true;
-
-    ixEthAccMulticastAddressSet(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortMulticastAddressLeavePriv (IxEthAccPortId portId,
-				   IxEthAccMacAddr *macAddr)
-{
-    UINT32 i;
-    IxEthAccMacAddr mcastMacAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}};
-
-    /*Check that the port parameter is valid*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot leave Multicast Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*Check that the mac address is valid*/
-    if(macAddr == NULL)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-    /* Remove this mac address from the mask for the specified port
-     * we copy down all entries above the blanked entry, and
-     * decrement the index
-     */
-    i=0;
-
-    while(i<ixEthAccMacState[portId].mcastAddrIndex)
-    {
-	/*Check if the current entry matches*/
-	if(ixEthAccMacEqual(&ixEthAccMacState[portId].mcastAddrsTable[i],
-			    macAddr))
-	{
-	    if(ixEthAccMacEqual(macAddr, &mcastMacAddr))
-	    {
-		ixEthAccMacState[portId].joinAll = false;
-	    }
-	    /*Decrement the index into the multicast address table
-	      for the current port*/
-	    ixEthAccMacState[portId].mcastAddrIndex--;
-
-	    /*Copy down all entries above the current entry*/
-	    while(i<ixEthAccMacState[portId].mcastAddrIndex)
-	    {
-		memcpy(&ixEthAccMacState[portId].mcastAddrsTable[i],
-		       &ixEthAccMacState[portId].mcastAddrsTable[i+1],
-		       IX_IEEE803_MAC_ADDRESS_SIZE);
-                i++;
-	    }
-	    /*recalculate the mask and write it to the MAC*/
-	    ixEthAccMulticastAddressSet(portId);
-
-	    return IX_ETH_ACC_SUCCESS;
-	}
-	/* search the next entry */
-	i++;
-    }
-    /* no matching entry found */
-    return IX_ETH_ACC_NO_SUCH_ADDR;
-}
-
-IxEthAccStatus
-ixEthAccPortMulticastAddressLeaveAllPriv (IxEthAccPortId portId)
-{
-    /*Check that the port parameter is valid*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot leave all Multicast Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    ixEthAccMacState[portId].mcastAddrIndex = 0;
-    ixEthAccMacState[portId].joinAll = false;
-
-    ixEthAccMulticastAddressSet(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-IxEthAccStatus
-ixEthAccPortUnicastAddressShowPriv (IxEthAccPortId portId)
-{
-    IxEthAccMacAddr macAddr;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot show Unicast Address.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    /*Get the MAC (UINICAST) address from hardware*/
-    if(ixEthAccPortUnicastMacAddressGetPriv(portId, &macAddr) != IX_ETH_ACC_SUCCESS)
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: MAC address uninitialised port %u\n",
-			       (INT32)portId,0,0,0,0,0);
-	return IX_ETH_ACC_MAC_UNINITIALIZED;
-    }
-
-    /*print it out*/
-    ixEthAccMacPrint(&macAddr);
-    printf("\n");
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-
-void
-ixEthAccPortMulticastAddressShowPriv(IxEthAccPortId portId)
-{
-    IxEthAccMacAddr macAddr;
-    UINT32 i;
-
-    if(!IX_ETH_ACC_IS_PORT_VALID(portId))
-    {
-        return;
-    }
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot show Multicast Address.\n",(INT32)portId,0,0,0,0,0);
-        return ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return;
-    }
-
-    printf("Multicast MAC: ");
-    /*Get the MAC (MULTICAST) address from hardware*/
-    ixEthAccPortMulticastMacAddressGet(portId, &macAddr);
-    /*print it out*/
-    ixEthAccMacPrint(&macAddr);
-    /*Get the MAC (MULTICAST) filter from hardware*/
-    ixEthAccPortMulticastMacFilterGet(portId, &macAddr);
-    /*print it out*/
-    printf(" ( ");
-    ixEthAccMacPrint(&macAddr);
-    printf(" )\n");
-    printf("Constituent Addresses:\n");
-    for(i=0;i<ixEthAccMacState[portId].mcastAddrIndex;i++)
-    {
-	ixEthAccMacPrint(&ixEthAccMacState[portId].mcastAddrsTable[i]);
-	printf("\n");
-    }
-    return;
-}
-
-/*Set the duplex mode*/
-IxEthAccStatus
-ixEthAccPortDuplexModeSetPriv (IxEthAccPortId portId,
-			   IxEthAccDuplexMode mode)
-{
-    UINT32 txregval;
-    UINT32 rxregval;
-
-    /*This is bit 1 of the transmit control reg, set to 1 for half
-      duplex, 0 for full duplex*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set Duplex Mode.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     txregval);
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     rxregval);
-
-    if (mode ==  IX_ETH_ACC_FULL_DUPLEX)
-    {
-	/*Clear half duplex bit in TX*/
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_TX_CNTRL1,
-		  txregval & ~IX_ETH_ACC_TX_CNTRL1_DUPLEX);
-
-	/*We must set the pause enable in the receive logic when in
-	  full duplex mode*/
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_RX_CNTRL1,
-		  rxregval | IX_ETH_ACC_RX_CNTRL1_PAUSE_EN);
-	ixEthAccMacState[portId].fullDuplex = true;
-
-    }
-    else if (mode ==  IX_ETH_ACC_HALF_DUPLEX)
-    {
-	/*Set half duplex bit in TX*/
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_TX_CNTRL1,
-		  txregval | IX_ETH_ACC_TX_CNTRL1_DUPLEX);
-
-	/*We must clear pause enable in the receive logic when in
-	  half duplex mode*/
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_RX_CNTRL1,
-		  rxregval & ~IX_ETH_ACC_RX_CNTRL1_PAUSE_EN);
-
-	ixEthAccMacState[portId].fullDuplex = false;
-    }
-    else
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-
-    return IX_ETH_ACC_SUCCESS;
-
-}
-
-
-
-IxEthAccStatus
-ixEthAccPortDuplexModeGetPriv (IxEthAccPortId portId,
-			   IxEthAccDuplexMode *mode)
-{
-    /*Return the duplex mode for the specified port*/
-    UINT32 regval;
-
-    /*This is bit 1 of the transmit control reg, set to 1 for half
-      duplex, 0 for full duplex*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get Duplex Mode.\n",(INT32)portId,0,0,0,0,0);
-        /* return hald duplex */
-        *mode = IX_ETH_ACC_HALF_DUPLEX ;
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    if (mode == NULL)
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    if( regval & IX_ETH_ACC_TX_CNTRL1_DUPLEX)
-    {
-	*mode = IX_ETH_ACC_HALF_DUPLEX;
-    }
-    else
-    {
-	*mode = IX_ETH_ACC_FULL_DUPLEX;
-    }
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-
-IxEthAccStatus
-ixEthAccPortTxFrameAppendPaddingEnablePriv (IxEthAccPortId portId)
-{
-    UINT32 regval;
-    /*Enable FCS computation by the MAC and appending to the
-      frame*/
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Tx Frame Append Padding.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      regval |
-	      IX_ETH_ACC_TX_CNTRL1_PAD_EN);
-
-    ixEthAccMacState[portId].txPADAppend = true;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortTxFrameAppendPaddingDisablePriv (IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /*disable FCS computation and appending*/
-    /*Set bit 4 of Tx control register one to zero*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disble Tx Frame Append Padding.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      regval & ~IX_ETH_ACC_TX_CNTRL1_PAD_EN);
-
-    ixEthAccMacState[portId].txPADAppend = false;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortTxFrameAppendFCSEnablePriv (IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /*Enable FCS computation by the MAC and appending to the
-      frame*/
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Tx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      regval | IX_ETH_ACC_TX_CNTRL1_FCS_EN);
-
-    ixEthAccMacState[portId].txFCSAppend = true;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortTxFrameAppendFCSDisablePriv (IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /*disable FCS computation and appending*/
-    /*Set bit 4 of Tx control register one to zero*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable Tx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_TX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_TX_CNTRL1,
-	      regval & ~IX_ETH_ACC_TX_CNTRL1_FCS_EN);
-
-    ixEthAccMacState[portId].txFCSAppend = false;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortRxFrameAppendFCSEnablePriv (IxEthAccPortId portId)
-{
-    /*Set bit 2 of Rx control 1*/
-    UINT32 regval;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Rx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval | IX_ETH_ACC_RX_CNTRL1_CRC_EN);
-
-    ixEthAccMacState[portId].rxFCSAppend = true;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccPortRxFrameAppendFCSDisablePriv (IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    /*Clear bit 2 of Rx control 1*/
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable Rx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    REG_READ(ixEthAccMacBase[portId],
-	     IX_ETH_ACC_MAC_RX_CNTRL1,
-	     regval);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_RX_CNTRL1,
-	      regval & ~IX_ETH_ACC_RX_CNTRL1_CRC_EN);
-
-    ixEthAccMacState[portId].rxFCSAppend = false;
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-
-PRIVATE void
-ixEthAccMacNpeStatsMessageCallback (IxNpeMhNpeId npeId,
-				    IxNpeMhMessage msg)
-{
-    IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
-
-#ifndef NDEBUG
-    /* Prudent to at least check the port is within range */
-    if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
-    {
-	IX_ETH_ACC_FATAL_LOG(
-     "IXETHACC:ixEthAccMacNpeStatsMessageCallback: Illegal port: %u\n",
-     (UINT32)portId, 0, 0, 0, 0, 0);
-	return;
-    }
-#endif
-
-    /*Unblock Stats Get call*/
-    ixOsalMutexUnlock(&ixEthAccMacState[portId].ackMIBStatsLock);
-
-}
-
-PRIVATE void
-ixEthAccMibIIStatsEndianConvert (IxEthEthObjStats *retStats)
-{
-    /* endianness conversion */
-
-    /* Rx stats */
-    retStats->dot3StatsAlignmentErrors =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsAlignmentErrors);
-    retStats->dot3StatsFCSErrors =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsFCSErrors);
-    retStats->dot3StatsInternalMacReceiveErrors =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsInternalMacReceiveErrors);
-    retStats->RxOverrunDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxOverrunDiscards);
-    retStats->RxLearnedEntryDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxLearnedEntryDiscards);
-    retStats->RxLargeFramesDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxLargeFramesDiscards);
-    retStats->RxSTPBlockedDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxSTPBlockedDiscards);
-    retStats->RxVLANTypeFilterDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxVLANTypeFilterDiscards);
-    retStats->RxVLANIdFilterDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxVLANIdFilterDiscards);
-    retStats->RxInvalidSourceDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxInvalidSourceDiscards);
-    retStats->RxBlackListDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxBlackListDiscards);
-    retStats->RxWhiteListDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxWhiteListDiscards);
-    retStats->RxUnderflowEntryDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxUnderflowEntryDiscards);
-
-    /* Tx stats */
-    retStats->dot3StatsSingleCollisionFrames =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsSingleCollisionFrames);
-    retStats->dot3StatsMultipleCollisionFrames =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsMultipleCollisionFrames);
-    retStats->dot3StatsDeferredTransmissions =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsDeferredTransmissions);
-    retStats->dot3StatsLateCollisions =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsLateCollisions);
-    retStats->dot3StatsExcessiveCollsions =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsExcessiveCollsions);
-    retStats->dot3StatsInternalMacTransmitErrors =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsInternalMacTransmitErrors);
-    retStats->dot3StatsCarrierSenseErrors =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsCarrierSenseErrors);
-    retStats->TxLargeFrameDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->TxLargeFrameDiscards);
-    retStats->TxVLANIdFilterDiscards =
-	IX_OSAL_SWAP_BE_SHARED_LONG(retStats->TxVLANIdFilterDiscards);
-}
-
-IxEthAccStatus
-ixEthAccMibIIStatsGet (IxEthAccPortId portId,
-		       IxEthEthObjStats *retStats )
-{
-    IxNpeMhMessage message;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGet (Mac) EthAcc service is not initialized\n");
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (retStats == NULL)
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGet (Mac) NULL argument\n");
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGet (Mac) NPE for port %d is not available\n", portId);
-
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get MIB II Stats.\n",(INT32)portId,0,0,0,0,0);
-
-        /* Return all zero stats */
-        IX_ETH_ACC_MEMSET(retStats, 0, sizeof(IxEthEthObjStats));
-
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGet (Mac) port %d is not initialized\n", portId);
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    IX_OSAL_CACHE_INVALIDATE(retStats, sizeof(IxEthEthObjStats));
-
-    message.data[0] = IX_ETHNPE_GETSTATS << IX_ETH_ACC_MAC_MSGID_SHL;
-    message.data[1] = (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS(retStats);
-
-    /* Permit only one task to request MIB statistics Get operation
-       at a time */
-    ixOsalMutexLock(&ixEthAccMacState[portId].MIBStatsGetAccessLock, IX_OSAL_WAIT_FOREVER);
-
-    if(ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
-				      message,
-				      IX_ETHNPE_GETSTATS,
-				      ixEthAccMacNpeStatsMessageCallback,
-				      IX_NPEMH_SEND_RETRIES_DEFAULT)
-       != IX_SUCCESS)
-    {
-	ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetAccessLock);
-
-        printf("EthAcc: (Mac) StatsGet failed to send NPE message\n");
-
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /* Wait for callback invocation indicating response to
-       this request - we need this mutex in order to ensure
-       that the return from this function is synchronous */
-    ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsLock, IX_ETH_ACC_MIB_STATS_DELAY_MSECS);
-
-    /* Permit other tasks to perform MIB statistics Get operation */
-    ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetAccessLock);
-
-    ixEthAccMibIIStatsEndianConvert (retStats);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-PRIVATE void
-ixEthAccMacNpeStatsResetMessageCallback (IxNpeMhNpeId npeId,
-					 IxNpeMhMessage msg)
-{
-    IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId);
-
-#ifndef NDEBUG
-    /* Prudent to at least check the port is within range */
-    if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS)
-    {
-	IX_ETH_ACC_FATAL_LOG(
-     "IXETHACC:ixEthAccMacNpeStatsResetMessageCallback: Illegal port: %u\n",
-     (UINT32)portId, 0, 0, 0, 0, 0);
-	return;
-    }
-#endif
-
-    /*Unblock Stats Get & reset call*/
-    ixOsalMutexUnlock(&ixEthAccMacState[portId].ackMIBStatsResetLock);
-
-}
-
-
-
-IxEthAccStatus
-ixEthAccMibIIStatsGetClear (IxEthAccPortId portId,
-			    IxEthEthObjStats *retStats)
-{
-    IxNpeMhMessage message;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) EthAcc service is not initialized\n");
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (retStats == NULL)
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) NULL argument\n");
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) NPE for port %d is not available\n", portId);
-
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get and clear MIB II Stats.\n", (INT32)portId, 0, 0, 0, 0, 0);
-
-        /* Return all zero stats */
-        IX_ETH_ACC_MEMSET(retStats, 0, sizeof(IxEthEthObjStats));
-
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if (!IX_ETH_IS_PORT_INITIALIZED(portId))
-    {
-        printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) port %d is not initialized\n", portId);
-	return (IX_ETH_ACC_PORT_UNINITIALIZED);
-    }
-
-    IX_OSAL_CACHE_INVALIDATE(retStats, sizeof(IxEthEthObjStats));
-
-    message.data[0] = IX_ETHNPE_RESETSTATS << IX_ETH_ACC_MAC_MSGID_SHL;
-    message.data[1] = (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS(retStats);
-
-    /* Permit only one task to request MIB statistics Get-Reset operation at a time */
-    ixOsalMutexLock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock, IX_OSAL_WAIT_FOREVER);
-
-    if(ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId),
-				      message,
-				      IX_ETHNPE_RESETSTATS,
-				      ixEthAccMacNpeStatsResetMessageCallback,
-				      IX_NPEMH_SEND_RETRIES_DEFAULT)
-       != IX_SUCCESS)
-    {
-	ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock);
-
-        printf("EthAcc: (Mac) ixEthAccMibIIStatsGetClear failed to send NPE message\n");
-
-	return IX_ETH_ACC_FAIL;
-    }
-
-    /* Wait for callback invocation indicating response to this request */
-    ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsResetLock, IX_ETH_ACC_MIB_STATS_DELAY_MSECS);
-
-    /* permit other tasks to get and reset MIB stats*/
-    ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock);
-
-    ixEthAccMibIIStatsEndianConvert(retStats);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-IxEthAccStatus
-ixEthAccMibIIStatsClear (IxEthAccPortId portId)
-{
-    static IxEthEthObjStats retStats;
-    IxEthAccStatus status;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot clear MIB II Stats.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    /* there is no reset operation without a corresponding Get */
-    status = ixEthAccMibIIStatsGetClear(portId, &retStats);
-
-    return status;
-}
-
-/* Initialize the ethernet MAC settings */
-IxEthAccStatus
-ixEthAccMacInit(IxEthAccPortId portId)
-{
-    IX_OSAL_MBUF_POOL* portDisablePool;
-    UINT8 *data;
-
-    IX_ETH_ACC_VALIDATE_PORT_ID(portId);
-
-    if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId))
-    {
-        IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot initialize Mac.\n",(INT32)portId,0,0,0,0,0);
-        return IX_ETH_ACC_SUCCESS ;
-    }
-
-    if(ixEthAccMacState[portId].macInitialised == false)
-    {
-	ixEthAccMacState[portId].fullDuplex  = true;
-	ixEthAccMacState[portId].rxFCSAppend = true;
-	ixEthAccMacState[portId].txFCSAppend = true;
-	ixEthAccMacState[portId].txPADAppend = true;
-	ixEthAccMacState[portId].enabled     = false;
-	ixEthAccMacState[portId].promiscuous = true;
-	ixEthAccMacState[portId].joinAll     = false;
-	ixEthAccMacState[portId].initDone    = false;
-	ixEthAccMacState[portId].macInitialised = true;
-
-        /* initialize MIB stats mutexes */
-        ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsLock);
-        ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsLock, IX_OSAL_WAIT_FOREVER);
-
-        ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsResetLock);
-        ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsResetLock, IX_OSAL_WAIT_FOREVER);
-
-        ixOsalMutexInit(&ixEthAccMacState[portId].MIBStatsGetAccessLock);
-
-        ixOsalMutexInit(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock);
-
-        ixOsalMutexInit(&ixEthAccMacState[portId].npeLoopbackMessageLock);
-
-	ixEthAccMacState[portId].portDisableRxMbufPtr = NULL;
-        ixEthAccMacState[portId].portDisableTxMbufPtr = NULL;
-
-	portDisablePool = IX_OSAL_MBUF_POOL_INIT(2,
-			  IX_ETHACC_RX_MBUF_MIN_SIZE,
-			  "portDisable Pool");
-
-        IX_OSAL_ENSURE(portDisablePool != NULL, "Failed to initialize PortDisable pool");
-
-	ixEthAccMacState[portId].portDisableRxMbufPtr = IX_OSAL_MBUF_POOL_GET(portDisablePool);
-        ixEthAccMacState[portId].portDisableTxMbufPtr = IX_OSAL_MBUF_POOL_GET(portDisablePool);
-
-	IX_OSAL_ENSURE(ixEthAccMacState[portId].portDisableRxMbufPtr != NULL,
-		  "Pool allocation failed");
-        IX_OSAL_ENSURE(ixEthAccMacState[portId].portDisableTxMbufPtr != NULL,
-		  "Pool allocation failed");
-	/* fill the payload of the Rx mbuf used in portDisable */
-        IX_OSAL_MBUF_MLEN(ixEthAccMacState[portId].portDisableRxMbufPtr) = IX_ETHACC_RX_MBUF_MIN_SIZE;
-
-        memset(IX_OSAL_MBUF_MDATA(ixEthAccMacState[portId].portDisableRxMbufPtr),
-	       0xAA,
-	       IX_ETHACC_RX_MBUF_MIN_SIZE);
-
-	/* fill the payload of the Tx mbuf used in portDisable (64 bytes) */
-        IX_OSAL_MBUF_MLEN(ixEthAccMacState[portId].portDisableTxMbufPtr) = 64;
-        IX_OSAL_MBUF_PKT_LEN(ixEthAccMacState[portId].portDisableTxMbufPtr) = 64;
-
-        data = (UINT8 *) IX_OSAL_MBUF_MDATA(ixEthAccMacState[portId].portDisableTxMbufPtr);
-        memset(data, 0xBB, 64);
-        data[0] = 0x00; /* unicast destination MAC address */
-        data[6] = 0x00; /* unicast source MAC address */
-        data[12] = 0x08; /* typelength : IP frame */
-        data[13] = 0x00; /* typelength : IP frame */
-
-	IX_OSAL_CACHE_FLUSH(data, 64);
-    }
-
-    IX_OSAL_ASSERT (ixEthAccMacBase[portId] != 0);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_RESET);
-
-    ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_CORE_CNTRL,
-	      IX_ETH_ACC_CORE_MDC_EN);
-
-    REG_WRITE(ixEthAccMacBase[portId],
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH,
-	      IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT);
-
-    ixEthAccMacStateUpdate(portId);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-/* PRIVATE Functions*/
-
-PRIVATE void
-ixEthAccMacStateUpdate(IxEthAccPortId portId)
-{
-    UINT32 regval;
-
-    if ( ixEthAccMacState[portId].enabled == false )
-    {
-	/*  Just disable both the transmitter and reciver in the MAC.  */
-        REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_RX_CNTRL1,
-		 regval);
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_RX_CNTRL1,
-		  regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN);
-
-        REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_TX_CNTRL1,
-		 regval);
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_TX_CNTRL1,
-		  regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN);
-    }
-
-    if(ixEthAccMacState[portId].fullDuplex)
-    {
-	ixEthAccPortDuplexModeSetPriv (portId, IX_ETH_ACC_FULL_DUPLEX);
-    }
-    else
-    {
-	ixEthAccPortDuplexModeSetPriv (portId, IX_ETH_ACC_HALF_DUPLEX);
-    }
-
-    if(ixEthAccMacState[portId].rxFCSAppend)
-    {
-	ixEthAccPortRxFrameAppendFCSEnablePriv (portId);
-    }
-    else
-    {
-	ixEthAccPortRxFrameAppendFCSDisablePriv (portId);
-    }
-
-    if(ixEthAccMacState[portId].txFCSAppend)
-    {
-	ixEthAccPortTxFrameAppendFCSEnablePriv (portId);
-    }
-    else
-    {
-	ixEthAccPortTxFrameAppendFCSDisablePriv (portId);
-    }
-
-    if(ixEthAccMacState[portId].txPADAppend)
-    {
-	ixEthAccPortTxFrameAppendPaddingEnablePriv (portId);
-    }
-    else
-    {
-	ixEthAccPortTxFrameAppendPaddingDisablePriv (portId);
-    }
-
-    if(ixEthAccMacState[portId].promiscuous)
-    {
-	ixEthAccPortPromiscuousModeSetPriv(portId);
-    }
-    else
-    {
-	ixEthAccPortPromiscuousModeClearPriv(portId);
-    }
-
-    if ( ixEthAccMacState[portId].enabled == true )
-    {
-        /*   Enable both the transmitter and reciver in the MAC.  */
-        REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_RX_CNTRL1,
-		 regval);
-        REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_RX_CNTRL1,
-		  regval | IX_ETH_ACC_RX_CNTRL1_RX_EN);
-
-        REG_READ(ixEthAccMacBase[portId],
-		 IX_ETH_ACC_MAC_TX_CNTRL1,
-		 regval);
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_TX_CNTRL1,
-		  regval | IX_ETH_ACC_TX_CNTRL1_TX_EN);
-    }
-}
-
-
-PRIVATE BOOL
-ixEthAccMacEqual(IxEthAccMacAddr *macAddr1,
-		 IxEthAccMacAddr *macAddr2)
-{
-    UINT32 i;
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE; i++)
-    {
-	if(macAddr1->macAddress[i] != macAddr2->macAddress[i])
-	{
-	    return false;
-	}
-    }
-    return true;
-}
-
-PRIVATE void
-ixEthAccMacPrint(IxEthAccMacAddr *m)
-{
-    printf("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x",
-	   m->macAddress[0], m->macAddress[1],
-	   m->macAddress[2], m->macAddress[3],
-	   m->macAddress[4], m->macAddress[5]);
-}
-
-/* Set the multicast address and address mask registers
- *
- * A bit in the address mask register must be set if
- * all multicast addresses always have that bit set, or if
- * all multicast addresses always have that bit cleared.
- *
- * A bit in the address register must be set if all multicast
- * addresses have that bit set, otherwise, it should be cleared
- */
-
-PRIVATE void
-ixEthAccMulticastAddressSet(IxEthAccPortId portId)
-{
-    UINT32 i;
-    UINT32 j;
-    IxEthAccMacAddr addressMask;
-    IxEthAccMacAddr address;
-    IxEthAccMacAddr alwaysClearBits;
-    IxEthAccMacAddr alwaysSetBits;
-
-    /* calculate alwaysClearBits and alwaysSetBits:
-     * alwaysClearBits is calculated by ORing all
-     * multicast addresses, those bits that are always
-     * clear are clear in the result
-     *
-     * alwaysSetBits is calculated by ANDing all
-     * multicast addresses, those bits that are always set
-     * are set in the result
-     */
-
-    if (ixEthAccMacState[portId].promiscuous == true)
-    {
-	/* Promiscuous Mode is set, and filtering
-	 * allow all packets, and enable the mcast and
-	 * bcast detection.
-	 */
-	memset(&addressMask.macAddress,
-	       0,
-	       IX_IEEE803_MAC_ADDRESS_SIZE);
-	memset(&address.macAddress,
-	       0,
-	       IX_IEEE803_MAC_ADDRESS_SIZE);
-    }
-    else
-    {
-	if(ixEthAccMacState[portId].joinAll == true)
-	{
-	    /* Join all is set. The mask and address are
-	     * the multicast settings.
-	     */
-	    IxEthAccMacAddr macAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}};
-
-	    memcpy(addressMask.macAddress,
-		   macAddr.macAddress,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-	    memcpy(address.macAddress,
-		   macAddr.macAddress,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-	}
-	else if(ixEthAccMacState[portId].mcastAddrIndex == 0)
-	{
-	    /* No entry in the filtering database,
-	     * Promiscuous Mode is cleared, Broadcast filtering
-	     * is configured.
-	     */
-	    memset(addressMask.macAddress,
-		   IX_ETH_ACC_MAC_ALL_BITS_SET,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-	    memset(address.macAddress,
-		   IX_ETH_ACC_MAC_ALL_BITS_SET,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-	}
-	else
-	{
-	    /* build a mask and an address which mix all entreis
-	     * from the list of multicast addresses
-	     */
-	    memset(alwaysClearBits.macAddress,
-		   0,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-	    memset(alwaysSetBits.macAddress,
-		   IX_ETH_ACC_MAC_ALL_BITS_SET,
-		   IX_IEEE803_MAC_ADDRESS_SIZE);
-
-	    for(i=0;i<ixEthAccMacState[portId].mcastAddrIndex;i++)
-	    {
-		for(j=0;j<IX_IEEE803_MAC_ADDRESS_SIZE;j++)
-		{
-		    alwaysClearBits.macAddress[j] |=
-			ixEthAccMacState[portId].mcastAddrsTable[i].macAddress[j];
-		    alwaysSetBits.macAddress[j] &=
-			ixEthAccMacState[portId].mcastAddrsTable[i].macAddress[j];
-		}
-	    }
-
-	    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-	    {
-		addressMask.macAddress[i] = alwaysSetBits.macAddress[i]
-		    | ~alwaysClearBits.macAddress[i];
-		address.macAddress[i] = alwaysSetBits.macAddress[i];
-	    }
-	}
-    }
-
-    /*write the new addr filtering to h/w*/
-    for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++)
-    {
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_ADDR_MASK_1+i*sizeof(UINT32),
-		  addressMask.macAddress[i]);
-	REG_WRITE(ixEthAccMacBase[portId],
-		  IX_ETH_ACC_MAC_ADDR_1+i*sizeof(UINT32),
-		  address.macAddress[i]);
-    }
-}
diff --git a/drivers/net/npe/IxEthAccMii.c b/drivers/net/npe/IxEthAccMii.c
deleted file mode 100644
index bfe606f..0000000
--- a/drivers/net/npe/IxEthAccMii.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/**
- * @file IxEthAccMii.c
- *
- * @author Intel Corporation
- * @date 
- *
- * @brief  MII control functions
- *
- * Design Notes:
- *
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxOsal.h"
-#include "IxEthAcc.h"
-#include "IxEthAcc_p.h"
-#include "IxEthAccMac_p.h"
-#include "IxEthAccMii_p.h"
-
-
-PRIVATE UINT32 miiBaseAddressVirt;
-PRIVATE IxOsalMutex miiAccessLock;
-
-PUBLIC UINT32 ixEthAccMiiRetryCount    = IX_ETH_ACC_MII_TIMEOUT_10TH_SECS;
-PUBLIC UINT32 ixEthAccMiiAccessTimeout = IX_ETH_ACC_MII_10TH_SEC_IN_MILLIS;
-
-/* -----------------------------------
- * private function prototypes
- */
-PRIVATE void
-ixEthAccMdioCmdWrite(UINT32 mdioCommand);
-
-PRIVATE void
-ixEthAccMdioCmdRead(UINT32 *data);
-
-PRIVATE void
-ixEthAccMdioStatusRead(UINT32 *data);
-
-
-PRIVATE void
-ixEthAccMdioCmdWrite(UINT32 mdioCommand)
-{
-    REG_WRITE(miiBaseAddressVirt,
-	      IX_ETH_ACC_MAC_MDIO_CMD_1,
-	      mdioCommand & 0xff);
-
-    REG_WRITE(miiBaseAddressVirt,
-	      IX_ETH_ACC_MAC_MDIO_CMD_2,
-	      (mdioCommand >> 8) & 0xff);
-
-    REG_WRITE(miiBaseAddressVirt,
-	      IX_ETH_ACC_MAC_MDIO_CMD_3,
-	      (mdioCommand >> 16) & 0xff);
-
-    REG_WRITE(miiBaseAddressVirt,
-	      IX_ETH_ACC_MAC_MDIO_CMD_4,
-	      (mdioCommand >> 24) & 0xff);
-}
-
-PRIVATE void
-ixEthAccMdioCmdRead(UINT32 *data)
-{
-    UINT32 regval;
-
-    REG_READ(miiBaseAddressVirt,
-	     IX_ETH_ACC_MAC_MDIO_CMD_1,
-	     regval);
-
-    *data = regval & 0xff;
-
-    REG_READ(miiBaseAddressVirt,
-	     IX_ETH_ACC_MAC_MDIO_CMD_2,
-	     regval);
-
-    *data |= (regval & 0xff) << 8;
-
-    REG_READ(miiBaseAddressVirt,
-	     IX_ETH_ACC_MAC_MDIO_CMD_3,
-	     regval);
-
-    *data |= (regval & 0xff) << 16;
-
-    REG_READ(miiBaseAddressVirt,
-	     IX_ETH_ACC_MAC_MDIO_CMD_4,
-	     regval);
-
-    *data |= (regval & 0xff) << 24;
-
-}
-
-PRIVATE void
-ixEthAccMdioStatusRead(UINT32 *data)
-{
-    UINT32 regval;
-
-    REG_READ(miiBaseAddressVirt,
-	     IX_ETH_ACC_MAC_MDIO_STS_1,
-	     regval);
-
-    *data = regval & 0xff;
-
-    REG_READ(miiBaseAddressVirt,
-	     IX_ETH_ACC_MAC_MDIO_STS_2,
-	     regval);
-
-    *data |= (regval & 0xff) << 8;
-
-    REG_READ(miiBaseAddressVirt,
-	     IX_ETH_ACC_MAC_MDIO_STS_3,
-	     regval);
-
-    *data |= (regval & 0xff) << 16;
-
-    REG_READ(miiBaseAddressVirt,
-	     IX_ETH_ACC_MAC_MDIO_STS_4,
-	     regval);
-    
-    *data |= (regval & 0xff) << 24;
-    
-}
-
-
-/********************************************************************
- * ixEthAccMiiInit
- */
-IxEthAccStatus
-ixEthAccMiiInit()
-{
-    if(ixOsalMutexInit(&miiAccessLock)!= IX_SUCCESS)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-
-    miiBaseAddressVirt = (UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_0_BASE, IX_OSAL_IXP400_ETHA_MAP_SIZE);
-    
-    if (miiBaseAddressVirt == 0)
-    {
-      ixOsalLog(IX_OSAL_LOG_LVL_FATAL, 
-		IX_OSAL_LOG_DEV_STDOUT, 
-		"EthAcc: Could not map MII I/O mapped memory\n", 
-		0, 0, 0, 0, 0, 0);
-      
-      return IX_ETH_ACC_FAIL;
-    }
-    
-    return IX_ETH_ACC_SUCCESS;
-}
-
-void
-ixEthAccMiiUnload(void)
-{
-    IX_OSAL_MEM_UNMAP(miiBaseAddressVirt);
-  
-    miiBaseAddressVirt = 0;
-}
-
-PUBLIC IxEthAccStatus
-ixEthAccMiiAccessTimeoutSet(UINT32 timeout, UINT32 retryCount)
-{
-    if (retryCount < 1) return IX_ETH_ACC_FAIL;
-
-    ixEthAccMiiRetryCount    = retryCount;
-    ixEthAccMiiAccessTimeout = timeout;
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-/*********************************************************************
- * ixEthAccMiiReadRtn - read a 16 bit value from a PHY
- */
-IxEthAccStatus      
-ixEthAccMiiReadRtn (UINT8 phyAddr, 
-		    UINT8 phyReg, 
-		    UINT16 *value)
-{
-    UINT32 mdioCommand;
-    UINT32 regval;
-    UINT32 miiTimeout;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    if ((phyAddr >= IXP425_ETH_ACC_MII_MAX_ADDR) 
-	|| (phyReg >= IXP425_ETH_ACC_MII_MAX_REG))
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    if (value == NULL)
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER);
-    mdioCommand = phyReg <<  IX_ETH_ACC_MII_REG_SHL 
-	| phyAddr << IX_ETH_ACC_MII_ADDR_SHL;
-    mdioCommand |= IX_ETH_ACC_MII_GO;
-
-    ixEthAccMdioCmdWrite(mdioCommand);
-    
-    miiTimeout = ixEthAccMiiRetryCount;
-
-    while(miiTimeout)
-    {
-	
-	ixEthAccMdioCmdRead(&regval);
-     
-	if((regval & IX_ETH_ACC_MII_GO) == 0x0)
-	{	    
-	    break;
-	}
-	/* Sleep for a while */
-	ixOsalSleep(ixEthAccMiiAccessTimeout);
-	miiTimeout--;
-    }
-    
-
-    
-    if(miiTimeout == 0)
-    {	
-	ixOsalMutexUnlock(&miiAccessLock);
-	*value = 0xffff;
-	return IX_ETH_ACC_FAIL;
-    }
-    
-    
-    ixEthAccMdioStatusRead(&regval);
-    if(regval & IX_ETH_ACC_MII_READ_FAIL)
-    {
-	ixOsalMutexUnlock(&miiAccessLock);
-	*value = 0xffff;
-	return IX_ETH_ACC_FAIL;
-    }
-
-    *value = regval & 0xffff;
-    ixOsalMutexUnlock(&miiAccessLock);
-    return IX_ETH_ACC_SUCCESS;
-    
-}
-
-
-/*********************************************************************
- * ixEthAccMiiWriteRtn - write a 16 bit value to a PHY
- */
-IxEthAccStatus
-ixEthAccMiiWriteRtn (UINT8 phyAddr, 
-		     UINT8 phyReg, 
-		     UINT16 value)
-{
-    UINT32 mdioCommand;
-    UINT32 regval;
-    UINT16 readVal;
-    UINT32 miiTimeout;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    if ((phyAddr >= IXP425_ETH_ACC_MII_MAX_ADDR) 
-	|| (phyReg >= IXP425_ETH_ACC_MII_MAX_REG))
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-   
-    /* ensure that a PHY is present at this address */
-    if(ixEthAccMiiReadRtn(phyAddr,
-                          IX_ETH_ACC_MII_CTRL_REG,
-                          &readVal) != IX_ETH_ACC_SUCCESS)
-    {
-        return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER);
-    mdioCommand = phyReg << IX_ETH_ACC_MII_REG_SHL
-	| phyAddr << IX_ETH_ACC_MII_ADDR_SHL ;
-    mdioCommand |= IX_ETH_ACC_MII_GO | IX_ETH_ACC_MII_WRITE | value;
-
-    ixEthAccMdioCmdWrite(mdioCommand);
-    
-    miiTimeout = ixEthAccMiiRetryCount;
-
-    while(miiTimeout)
-    {
-	
-	ixEthAccMdioCmdRead(&regval);
-
-	/*The "GO" bit is reset to 0 when the write completes*/
-	if((regval & IX_ETH_ACC_MII_GO) == 0x0)
-	{		    
-	    break;
-	}
-	/* Sleep for a while */
-	ixOsalSleep(ixEthAccMiiAccessTimeout);
-        miiTimeout--;
-    }
-    
-    ixOsalMutexUnlock(&miiAccessLock);
-    if(miiTimeout == 0)
-    {
-	return IX_ETH_ACC_FAIL;
-    }
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-/*****************************************************************
- *
- *  Phy query functions
- *
- */
-IxEthAccStatus
-ixEthAccMiiStatsShow (UINT32 phyAddr)
-{
-    UINT16 regval;
-    printf("Regisers on PHY at address 0x%x\n", phyAddr);
-    ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_CTRL_REG, &regval);
-    printf("    Control Register                  :      0x%4.4x\n", regval);
-    ixEthAccMiiReadRtn(phyAddr,  IX_ETH_ACC_MII_STAT_REG, &regval);
-    printf("    Status Register                   :      0x%4.4x\n", regval);
-    ixEthAccMiiReadRtn(phyAddr,  IX_ETH_ACC_MII_PHY_ID1_REG, &regval);
-    printf("    PHY ID1 Register                  :      0x%4.4x\n", regval);
-    ixEthAccMiiReadRtn(phyAddr,  IX_ETH_ACC_MII_PHY_ID2_REG, &regval);
-    printf("    PHY ID2 Register                  :      0x%4.4x\n", regval);
-    ixEthAccMiiReadRtn(phyAddr,  IX_ETH_ACC_MII_AN_ADS_REG, &regval);
-    printf("    Auto Neg ADS Register             :      0x%4.4x\n", regval);
-    ixEthAccMiiReadRtn(phyAddr,  IX_ETH_ACC_MII_AN_PRTN_REG, &regval);
-    printf("    Auto Neg Partner Ability Register :      0x%4.4x\n", regval);
-    ixEthAccMiiReadRtn(phyAddr,  IX_ETH_ACC_MII_AN_EXP_REG, &regval);
-    printf("    Auto Neg Expansion Register       :      0x%4.4x\n", regval);
-    ixEthAccMiiReadRtn(phyAddr,  IX_ETH_ACC_MII_AN_NEXT_REG, &regval);
-    printf("    Auto Neg Next Register            :      0x%4.4x\n", regval);
-
-    return IX_ETH_ACC_SUCCESS;
-}
-
-
-/*****************************************************************
- *
- *  Interface query functions
- *
- */
-IxEthAccStatus
-ixEthAccMdioShow (void)
-{
-    UINT32 regval;
-
-    if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED())
-    {
-	return (IX_ETH_ACC_FAIL);
-    }
-
-    ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER);
-    ixEthAccMdioCmdRead(&regval);
-    ixOsalMutexUnlock(&miiAccessLock);
-    
-    printf("MDIO command register\n");
-    printf("    Go bit      : 0x%x\n", (regval & BIT(31)) >> 31);
-    printf("    MDIO Write  : 0x%x\n", (regval & BIT(26)) >> 26);
-    printf("    PHY address : 0x%x\n", (regval >> 21) & 0x1f);
-    printf("    Reg address : 0x%x\n", (regval >> 16) & 0x1f);
-	
-    ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER);
-    ixEthAccMdioStatusRead(&regval);
-    ixOsalMutexUnlock(&miiAccessLock);
-
-    printf("MDIO status register\n");
-    printf("    Read OK     : 0x%x\n", (regval & BIT(31)) >> 31);
-    printf("    Read Data   : 0x%x\n", (regval >> 16) & 0xff);
-
-    return IX_ETH_ACC_SUCCESS;   
-}
-
diff --git a/drivers/net/npe/IxEthDBAPI.c b/drivers/net/npe/IxEthDBAPI.c
deleted file mode 100644
index 023cf50..0000000
--- a/drivers/net/npe/IxEthDBAPI.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/**
- * @file IxEthDBAPI.c
- *
- * @brief Implementation of the public API
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxEthDB_p.h"
-#include "IxFeatureCtrl.h"
-
-extern HashTable dbHashtable;
-extern IxEthDBPortMap overflowUpdatePortList;
-extern BOOL ixEthDBPortUpdateRequired[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1];
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING);
-
-    return ixEthDBTriggerAddPortUpdate(macAddr, portID, true);
-}
-    
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-        
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING);
-
-    return ixEthDBTriggerAddPortUpdate(macAddr, portID, false);
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr)
-{
-    HashNode *searchResult;
-
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-
-    searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS);
-
-    if (searchResult == NULL)
-    {
-        return IX_ETH_DB_NO_SUCH_ADDR; /* not found */
-    }
-    
-    ixEthDBReleaseHashNode(searchResult);
-    
-    /* build a remove event and place it on the event queue */
-    return ixEthDBTriggerRemovePortUpdate(macAddr, ((MacDescriptor *) searchResult->data)->portID);
-}
-       
-IX_ETH_DB_PUBLIC
-void ixEthDBDatabaseMaintenance()
-{
-    HashIterator iterator;
-    UINT32 portIndex;
-    BOOL agingRequired = false;
-
-    /* ports who will have deleted records and therefore will need updating */
-    IxEthDBPortMap triggerPorts;
-
-    if (IX_FEATURE_CTRL_SWCONFIG_ENABLED !=
-        ixFeatureCtrlSwConfigurationCheck (IX_FEATURECTRL_ETH_LEARNING))
-    {
-        return;
-    }
-
-    SET_EMPTY_DEPENDENCY_MAP(triggerPorts);
-
-    /* check if there's at least a port that needs aging */
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        if (ixEthDBPortInfo[portIndex].agingEnabled && ixEthDBPortInfo[portIndex].enabled)
-        {
-            agingRequired = true;
-        }
-    }
-
-    if (agingRequired)
-    {
-        /* ask each NPE port to write back the database for aging inspection */
-        for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-        {
-            if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE
-                && ixEthDBPortInfo[portIndex].agingEnabled
-                && ixEthDBPortInfo[portIndex].enabled)
-            {
-                IxNpeMhMessage message;
-                IX_STATUS result;
-                
-                /* send EDB_GetMACAddressDatabase message */
-                FILL_GETMACADDRESSDATABASE(message, 
-                    0 /* unused */, 
-                    IX_OSAL_MMU_VIRT_TO_PHYS(ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone));
-
-                IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portIndex), message, result);
-
-                if (result == IX_SUCCESS)
-                {
-                    /* analyze NPE copy */
-                    ixEthDBNPESyncScan(portIndex, ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone, FULL_ELT_BYTE_SIZE);
-
-                    IX_ETH_DB_SUPPORT_TRACE("DB: (API) Finished scanning NPE tree on port %d\n", portIndex);
-                }
-                else
-                {
-                    ixEthDBPortInfo[portIndex].agingEnabled                = false;
-                    ixEthDBPortInfo[portIndex].updateMethod.updateEnabled  = false;
-                    ixEthDBPortInfo[portIndex].updateMethod.userControlled = true;
-
-                    ixOsalLog(IX_OSAL_LOG_LVL_FATAL,
-                        IX_OSAL_LOG_DEV_STDOUT, 
-                        "EthDB: (Maintenance) warning, disabling aging and updates for port %d (assumed dead)\n",
-                        portIndex, 0, 0, 0, 0, 0);
-
-                    ixEthDBDatabaseClear(portIndex, IX_ETH_DB_ALL_RECORD_TYPES);
-                }
-            }
-        }
-
-        /* browse database and age entries */
-        BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator));
-
-        while (IS_ITERATOR_VALID(&iterator))
-        {
-            MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data;
-            UINT32 *age               = NULL;
-            BOOL staticEntry          = true;
-
-            if (descriptor->type == IX_ETH_DB_FILTERING_RECORD)
-            {
-                age         = &descriptor->recordData.filteringData.age;
-                staticEntry = descriptor->recordData.filteringData.staticEntry;
-            }
-            else if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD)
-            {
-                age         = &descriptor->recordData.filteringVlanData.age;
-                staticEntry = descriptor->recordData.filteringVlanData.staticEntry;
-            }
-            else
-            {
-                staticEntry = true;
-            }
-
-            if (ixEthDBPortInfo[descriptor->portID].agingEnabled && (staticEntry == false))
-            {
-                /* manually increment the age if the port has no such capability */
-                if ((ixEthDBPortDefinitions[descriptor->portID].capabilities & IX_ETH_ENTRY_AGING) == 0)
-                {
-                    *age += (IX_ETH_DB_MAINTENANCE_TIME / 60);
-                }
-
-                /* age entry if it exceeded the maximum time to live */
-                if (*age >= (IX_ETH_DB_LEARNING_ENTRY_AGE_TIME / 60))
-                {
-                    /* add port to the set of update trigger ports */
-                    JOIN_PORT_TO_MAP(triggerPorts, descriptor->portID);
-
-                    /* delete entry */
-                    BUSY_RETRY(ixEthDBRemoveEntryAtHashIterator(&dbHashtable, &iterator));
-                }
-                else
-                {
-                    /* move to the next record */
-                    BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator));
-                }
-            }
-            else
-            {
-                /* move to the next record */
-                BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator));
-            }
-        }
-
-        /* update ports which lost records */
-        ixEthDBUpdatePortLearningTrees(triggerPorts);
-    }
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType)
-{
-    IxEthDBPortMap triggerPorts;
-    HashIterator iterator;
-
-    if (portID >= IX_ETH_DB_NUMBER_OF_PORTS && portID != IX_ETH_DB_ALL_PORTS)
-    {
-        return IX_ETH_DB_INVALID_PORT;
-    }
-
-    /* check if the user passes some extra bits */
-    if ((recordType | IX_ETH_DB_ALL_RECORD_TYPES) != IX_ETH_DB_ALL_RECORD_TYPES)
-    {
-        return IX_ETH_DB_INVALID_ARG;
-    }
-
-    SET_EMPTY_DEPENDENCY_MAP(triggerPorts);
-    
-    /* browse database and age entries */
-    BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator));
-
-    while (IS_ITERATOR_VALID(&iterator))
-    {
-        MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data;
-
-        if (((descriptor->portID == portID) || (portID == IX_ETH_DB_ALL_PORTS))
-            && ((descriptor->type & recordType) != 0))
-        {
-            /* add to trigger if automatic updates are required */
-            if (ixEthDBPortUpdateRequired[descriptor->type])
-            {
-                /* add port to the set of update trigger ports */
-                JOIN_PORT_TO_MAP(triggerPorts, descriptor->portID);
-            }
-
-            /* delete entry */
-            BUSY_RETRY(ixEthDBRemoveEntryAtHashIterator(&dbHashtable, &iterator));
-        }
-        else
-        {
-            /* move to the next record */
-            BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator));
-        }
-    }
-
-    /* update ports which lost records */
-    ixEthDBUpdatePortLearningTrees(triggerPorts);
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
-{
-    HashNode *searchResult;
-    IxEthDBStatus result = IX_ETH_DB_NO_SUCH_ADDR;
-
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING);
-
-    searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS);
-
-    if (searchResult == NULL)
-    {
-        return IX_ETH_DB_NO_SUCH_ADDR; /* not found */
-    }
-
-    if (((MacDescriptor *) (searchResult->data))->portID == portID)
-    {
-        result = IX_ETH_DB_SUCCESS; /* address and port match */
-    }
-
-    ixEthDBReleaseHashNode(searchResult);
-
-    return result;
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr)
-{
-    HashNode *searchResult;
-
-    IX_ETH_DB_CHECK_REFERENCE(portID);
-    
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-
-    searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS);
-
-    if (searchResult == NULL)
-    {
-        return IX_ETH_DB_NO_SUCH_ADDR; /* not found */
-    }
-
-    /* return the port ID */
-    *portID = ((MacDescriptor *) searchResult->data)->portID;
-
-    ixEthDBReleaseHashNode(searchResult);
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING);
-
-    ixEthDBPortInfo[portID].agingEnabled = false;
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING);
-
-    ixEthDBPortInfo[portID].agingEnabled = true;
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr)
-{
-    HashNode *searchResult;
-    MacDescriptor *descriptor;
-
-    IX_ETH_DB_CHECK_REFERENCE(portID);
-    
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-
-    searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS);
-
-    if (searchResult == NULL)
-    {
-        return IX_ETH_DB_NO_SUCH_ADDR; /* not found */
-    }
-    
-    descriptor = (MacDescriptor *) searchResult->data;
-
-    /* return the port ID */
-    *portID = descriptor->portID;
-
-    /* reset entry age */
-    if (descriptor->type == IX_ETH_DB_FILTERING_RECORD)
-    {
-        descriptor->recordData.filteringData.age = 0;
-    }
-    else
-    {
-        descriptor->recordData.filteringVlanData.age = 0;
-    }
-
-    ixEthDBReleaseHashNode(searchResult);
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_REFERENCE(dependencyPortMap);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING);
-
-    /* force bit at offset 255 to 0 (reserved) */
-    dependencyPortMap[31] &= 0xFE;
-
-    COPY_DEPENDENCY_MAP(ixEthDBPortInfo[portID].dependencyPortMap, dependencyPortMap);
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_REFERENCE(dependencyPortMap);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING);
-
-    COPY_DEPENDENCY_MAP(dependencyPortMap, ixEthDBPortInfo[portID].dependencyPortMap);
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortUpdateEnableSet(IxEthDBPortId portID, BOOL enableUpdate)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);    
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING);
-
-    ixEthDBPortInfo[portID].updateMethod.updateEnabled  = enableUpdate;
-    ixEthDBPortInfo[portID].updateMethod.userControlled = true;
-
-    return IX_ETH_DB_SUCCESS;
-}
diff --git a/drivers/net/npe/IxEthDBAPISupport.c b/drivers/net/npe/IxEthDBAPISupport.c
deleted file mode 100644
index c265d94..0000000
--- a/drivers/net/npe/IxEthDBAPISupport.c
+++ /dev/null
@@ -1,651 +0,0 @@
-/**
- * @file IxEthDBAPISupport.c
- *
- * @brief Public API support functions
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include <IxEthDB.h>
-#include <IxNpeMh.h>
-#include <IxFeatureCtrl.h>
-
-#include "IxEthDB_p.h"
-#include "IxEthDBMessages_p.h"
-#include "IxEthDB_p.h"
-#include "IxEthDBLog_p.h"
-
-#ifdef IX_UNIT_TEST
-
-int dbAccessCounter = 0;
-int overflowEvent   = 0;
-
-#endif
-
-/*
- * External declaration
- */
-extern HashTable dbHashtable;
-
-/*
- * Internal declaration
- */
-IX_ETH_DB_PUBLIC
-PortInfo ixEthDBPortInfo[IX_ETH_DB_NUMBER_OF_PORTS];
-
-IX_ETH_DB_PRIVATE
-struct
-{
-    BOOL saved;
-    IxEthDBPriorityTable priorityTable;
-    IxEthDBVlanSet vlanMembership;
-    IxEthDBVlanSet transmitTaggingInfo;
-    IxEthDBFrameFilter frameFilter;
-    IxEthDBTaggingAction taggingAction;
-    IxEthDBFirewallMode firewallMode;
-    BOOL stpBlocked;
-    BOOL srcAddressFilterEnabled;
-    UINT32 maxRxFrameSize;
-    UINT32 maxTxFrameSize;
-} ixEthDBPortState[IX_ETH_DB_NUMBER_OF_PORTS];
-
-#define IX_ETH_DB_DEFAULT_FRAME_SIZE (1518)
-
-/**
- * @brief initializes a port
- *
- * @param portID ID of the port to be initialized
- *
- * Note that redundant initializations are silently
- * dealt with and do not constitute an error
- *
- * This function is fully documented in the main
- * header file, IxEthDB.h
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBPortInit(IxEthDBPortId portID)
-{
-    PortInfo *portInfo;
-
-    if (portID >= IX_ETH_DB_NUMBER_OF_PORTS)
-    {
-        return;
-    }
-
-    portInfo = &ixEthDBPortInfo[portID];
-
-    if (ixEthDBSingleEthNpeCheck(portID) != IX_ETH_DB_SUCCESS)
-    {
-        WARNING_LOG("EthDB: Unavailable Eth %d: Cannot initialize EthDB Port.\n", (UINT32) portID);
-
-        return;
-    }
-
-    if (portInfo->initialized)
-    {
-        /* redundant */
-        return;
-    }
-
-    /* initialize core fields */
-    portInfo->portID = portID;
-    SET_DEPENDENCY_MAP(portInfo->dependencyPortMap, portID);
-
-    /* default values */
-    portInfo->agingEnabled       = false;
-    portInfo->enabled            = false;
-    portInfo->macAddressUploaded = false;
-    portInfo->maxRxFrameSize     = IX_ETHDB_DEFAULT_FRAME_SIZE;
-    portInfo->maxTxFrameSize     = IX_ETHDB_DEFAULT_FRAME_SIZE;
-
-    /* default update control values */
-    portInfo->updateMethod.searchTree              = NULL;
-    portInfo->updateMethod.searchTreePendingWrite  = false;
-    portInfo->updateMethod.treeInitialized         = false;
-    portInfo->updateMethod.updateEnabled           = false;
-    portInfo->updateMethod.userControlled          = false;
-
-    /* default WiFi parameters */
-    memset(portInfo->bbsid, 0, sizeof (portInfo->bbsid));
-    portInfo->frameControlDurationID = 0;
-
-    /* Ethernet NPE-specific initializations */
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE)
-    {
-        /* update handler */
-        portInfo->updateMethod.updateHandler = ixEthDBNPEUpdateHandler;
-    }
-
-    /* initialize state save */
-    ixEthDBPortState[portID].saved = false;
-
-    portInfo->initialized = true;
-}
-
-/**
- * @brief enables a port
- *
- * @param portID ID of the port to enable
- *
- * This function is fully documented in the main
- * header file, IxEthDB.h
- *
- * @return IX_ETH_DB_SUCCESS if enabling was
- * accomplished, or a meaningful error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID)
-{
-    IxEthDBPortMap triggerPorts;
-    PortInfo *portInfo;
-
-    IX_ETH_DB_CHECK_PORT_EXISTS(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    portInfo = &ixEthDBPortInfo[portID];
-
-    if (portInfo->enabled)
-    {
-        /* redundant */
-        return IX_ETH_DB_SUCCESS;
-    }
-
-    SET_DEPENDENCY_MAP(triggerPorts, portID);
-
-    /* mark as enabled */
-    portInfo->enabled = true;
-
-    /* Operation stops here when Ethernet Learning is not enabled */
-    if(IX_FEATURE_CTRL_SWCONFIG_DISABLED ==
-       ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING))
-    {
-        return IX_ETH_DB_SUCCESS;
-    }
-
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE && !portInfo->macAddressUploaded)
-    {
-        IX_ETH_DB_SUPPORT_TRACE("DB: (Support) MAC address not set on port %d, enable failed\n", portID);
-
-        /* must use UnicastAddressSet() before enabling an NPE port */
-        return IX_ETH_DB_MAC_UNINITIALIZED;
-    }
-
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE)
-    {
-        IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Attempting to enable the NPE callback for port %d...\n", portID);
-
-        if (!portInfo->updateMethod.userControlled
-                && ((portInfo->featureCapability & IX_ETH_DB_FILTERING) != 0))
-        {
-            portInfo->updateMethod.updateEnabled = true;
-        }
-
-        /* if this is first time initialization then we already have
-           write access to the tree and can AccessRelease directly */
-        if (!portInfo->updateMethod.treeInitialized)
-        {
-            IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Initializing tree for port %d\n", portID);
-
-            /* create an initial tree and release access into it */
-            ixEthDBUpdatePortLearningTrees(triggerPorts);
-
-            /* mark tree as being initialized */
-            portInfo->updateMethod.treeInitialized = true;
-        }
-    }
-
-    if (ixEthDBPortState[portID].saved)
-    {
-        /* previous configuration data stored, restore state */
-        if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0)
-        {
-            ixEthDBFirewallModeSet(portID, ixEthDBPortState[portID].firewallMode);
-            ixEthDBFirewallInvalidAddressFilterEnable(portID, ixEthDBPortState[portID].srcAddressFilterEnabled);
-        }
-
-#if 0 /* test-only */
-        if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0)
-        {
-            ixEthDBAcceptableFrameTypeSet(portID, ixEthDBPortState[portID].frameFilter);
-            ixEthDBIngressVlanTaggingEnabledSet(portID, ixEthDBPortState[portID].taggingAction);
-
-            ixEthDBEgressVlanTaggingEnabledSet(portID, ixEthDBPortState[portID].transmitTaggingInfo);
-            ixEthDBPortVlanMembershipSet(portID, ixEthDBPortState[portID].vlanMembership);
-
-            ixEthDBPriorityMappingTableSet(portID, ixEthDBPortState[portID].priorityTable);
-        }
-#endif
-
-        if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0)
-        {
-            ixEthDBSpanningTreeBlockingStateSet(portID, ixEthDBPortState[portID].stpBlocked);
-        }
-
-        ixEthDBFilteringPortMaximumRxFrameSizeSet(portID, ixEthDBPortState[portID].maxRxFrameSize);
-        ixEthDBFilteringPortMaximumTxFrameSizeSet(portID, ixEthDBPortState[portID].maxTxFrameSize);
-
-        /* discard previous save */
-        ixEthDBPortState[portID].saved = false;
-    }
-
-    IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Enabling succeeded for port %d\n", portID);
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief disables a port
- *
- * @param portID ID of the port to disable
- *
- * This function is fully documented in the
- * main header file, IxEthDB.h
- *
- * @return IX_ETH_DB_SUCCESS if disabling was
- * successful or an appropriate error message
- * otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID)
-{
-    HashIterator iterator;
-    IxEthDBPortMap triggerPorts; /* ports who will have deleted records and therefore will need updating */
-    BOOL result;
-    PortInfo *portInfo;
-    IxEthDBFeature learningEnabled;
-#if 0 /* test-only */
-    IxEthDBPriorityTable classZeroTable;
-#endif
-
-    IX_ETH_DB_CHECK_PORT_EXISTS(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    portInfo = &ixEthDBPortInfo[portID];
-
-    if (!portInfo->enabled)
-    {
-        /* redundant */
-        return IX_ETH_DB_SUCCESS;
-    }
-
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE)
-    {
-        /* save filtering state */
-        ixEthDBPortState[portID].firewallMode            = portInfo->firewallMode;
-        ixEthDBPortState[portID].frameFilter             = portInfo->frameFilter;
-        ixEthDBPortState[portID].taggingAction           = portInfo->taggingAction;
-        ixEthDBPortState[portID].stpBlocked              = portInfo->stpBlocked;
-        ixEthDBPortState[portID].srcAddressFilterEnabled = portInfo->srcAddressFilterEnabled;
-        ixEthDBPortState[portID].maxRxFrameSize          = portInfo->maxRxFrameSize;
-        ixEthDBPortState[portID].maxTxFrameSize          = portInfo->maxTxFrameSize;
-
-        memcpy(ixEthDBPortState[portID].vlanMembership, portInfo->vlanMembership, sizeof (IxEthDBVlanSet));
-        memcpy(ixEthDBPortState[portID].transmitTaggingInfo, portInfo->transmitTaggingInfo, sizeof (IxEthDBVlanSet));
-        memcpy(ixEthDBPortState[portID].priorityTable, portInfo->priorityTable, sizeof (IxEthDBPriorityTable));
-
-        ixEthDBPortState[portID].saved = true;
-
-        /* now turn off all EthDB filtering features on the port */
-
-#if 0 /* test-only */
-        /* VLAN & QoS */
-        if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0)
-        {
-            ixEthDBPortVlanMembershipRangeAdd((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID);
-            ixEthDBEgressVlanRangeTaggingEnabledSet((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID, false);
-            ixEthDBAcceptableFrameTypeSet((IxEthDBPortId) portID, IX_ETH_DB_ACCEPT_ALL_FRAMES);
-            ixEthDBIngressVlanTaggingEnabledSet((IxEthDBPortId) portID, IX_ETH_DB_PASS_THROUGH);
-
-            memset(classZeroTable, 0, sizeof (classZeroTable));
-            ixEthDBPriorityMappingTableSet((IxEthDBPortId) portID, classZeroTable);
-        }
-#endif
-
-        /* STP */
-        if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0)
-        {
-            ixEthDBSpanningTreeBlockingStateSet((IxEthDBPortId) portID, false);
-        }
-
-        /* Firewall */
-        if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0)
-        {
-            ixEthDBFirewallModeSet((IxEthDBPortId) portID, IX_ETH_DB_FIREWALL_BLACK_LIST);
-            ixEthDBFirewallTableDownload((IxEthDBPortId) portID);
-            ixEthDBFirewallInvalidAddressFilterEnable((IxEthDBPortId) portID, false);
-        }
-
-        /* Frame size filter */
-        ixEthDBFilteringPortMaximumFrameSizeSet((IxEthDBPortId) portID, IX_ETH_DB_DEFAULT_FRAME_SIZE);
-
-        /* WiFi */
-        if ((portInfo->featureCapability & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0)
-        {
-            ixEthDBWiFiConversionTableDownload((IxEthDBPortId) portID);
-        }
-
-        /* save and disable the learning feature bit */
-        learningEnabled          = portInfo->featureStatus & IX_ETH_DB_LEARNING;
-        portInfo->featureStatus &= ~IX_ETH_DB_LEARNING;
-    }
-    else
-    {
-        /* save the learning feature bit */
-        learningEnabled          = portInfo->featureStatus & IX_ETH_DB_LEARNING;
-    }
-
-    SET_EMPTY_DEPENDENCY_MAP(triggerPorts);
-
-    ixEthDBUpdateLock();
-
-    /* wipe out current entries for this port */
-    BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator));
-
-    while (IS_ITERATOR_VALID(&iterator))
-    {
-        MacDescriptor *descriptor =  (MacDescriptor *) iterator.node->data;
-
-        /* check if the port match. If so, remove the entry  */
-        if (descriptor->portID == portID
-                && (descriptor->type == IX_ETH_DB_FILTERING_RECORD || descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD)
-                && !descriptor->recordData.filteringData.staticEntry)
-        {
-            /* delete entry */
-            BUSY_RETRY(ixEthDBRemoveEntryAtHashIterator(&dbHashtable, &iterator));
-
-            /* add port to the set of update trigger ports */
-            JOIN_PORT_TO_MAP(triggerPorts, portID);
-        }
-        else
-        {
-            /* move to the next record */
-            BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator));
-        }
-    }
-
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE)
-    {
-        if (portInfo->updateMethod.searchTree != NULL)
-        {
-            ixEthDBFreeMacTreeNode(portInfo->updateMethod.searchTree);
-            portInfo->updateMethod.searchTree = NULL;
-        }
-
-        ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_FILTERING_RECORD);
-    }
-
-    /* mark as disabled */
-    portInfo->enabled = false;
-
-    /* disable updates unless the user has specifically altered the default behavior */
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE)
-    {
-        if (!portInfo->updateMethod.userControlled)
-        {
-            portInfo->updateMethod.updateEnabled = false;
-        }
-
-        /* make sure we re-initialize the NPE learning tree when the port is re-enabled */
-        portInfo->updateMethod.treeInitialized = false;
-    }
-
-    ixEthDBUpdateUnlock();
-
-    /* restore learning feature bit */
-    portInfo->featureStatus |= learningEnabled;
-
-    /* if we've removed any records or lost any events make sure to force an update */
-    IS_EMPTY_DEPENDENCY_MAP(result, triggerPorts);
-
-    if (!result)
-    {
-        ixEthDBUpdatePortLearningTrees(triggerPorts);
-    }
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief sends the updated maximum Tx/Rx frame lengths to the NPE
- *
- * @param portID ID of the port to update
- *
- * @return IX_ETH_DB_SUCCESS if the update completed
- * successfully or an appropriate error message otherwise
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-IxEthDBStatus ixEthDBPortFrameLengthsUpdate(IxEthDBPortId portID)
-{
-    IxNpeMhMessage message;
-    PortInfo *portInfo = &ixEthDBPortInfo[portID];
-    IX_STATUS result;
-
-    FILL_SETMAXFRAMELENGTHS_MSG(message, portID, portInfo->maxRxFrameSize, portInfo->maxTxFrameSize);
-
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-
-    return result;
-}
-
-/**
- * @brief sets the port maximum Rx frame size
- *
- * @param portID ID of the port to set the frame size on
- * @param maximumRxFrameSize maximum Rx frame size
- *
- * This function updates the internal data structures and
- * calls ixEthDBPortFrameLengthsUpdate() for NPE update.
- *
- * This function is fully documented in the main header
- * file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation was
- * successfull or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringPortMaximumRxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumRxFrameSize)
-{
-    IX_ETH_DB_CHECK_PORT_EXISTS(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-	if (!ixEthDBPortInfo[portID].initialized)
-	{
-		return IX_ETH_DB_PORT_UNINITIALIZED;
-	}
-
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE)
-    {
-	if ((maximumRxFrameSize < IX_ETHDB_MIN_NPE_FRAME_SIZE) ||
-	    (maximumRxFrameSize > IX_ETHDB_MAX_NPE_FRAME_SIZE))
-	{
-	    return IX_ETH_DB_INVALID_ARG;
-	}
-    }
-    else
-    {
-        return IX_ETH_DB_NO_PERMISSION;
-    }
-
-    /* update internal structure */
-    ixEthDBPortInfo[portID].maxRxFrameSize = maximumRxFrameSize;
-
-    /* update the maximum frame size in the NPE */
-    return ixEthDBPortFrameLengthsUpdate(portID);
-}
-
-/**
- * @brief sets the port maximum Tx frame size
- *
- * @param portID ID of the port to set the frame size on
- * @param maximumTxFrameSize maximum Tx frame size
- *
- * This function updates the internal data structures and
- * calls ixEthDBPortFrameLengthsUpdate() for NPE update.
- *
- * This function is fully documented in the main header
- * file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation was
- * successfull or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringPortMaximumTxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumTxFrameSize)
-{
-    IX_ETH_DB_CHECK_PORT_EXISTS(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-	if (!ixEthDBPortInfo[portID].initialized)
-	{
-		return IX_ETH_DB_PORT_UNINITIALIZED;
-	}
-
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE)
-    {
-	if ((maximumTxFrameSize < IX_ETHDB_MIN_NPE_FRAME_SIZE) ||
-	    (maximumTxFrameSize > IX_ETHDB_MAX_NPE_FRAME_SIZE))
-	{
-	    return IX_ETH_DB_INVALID_ARG;
-	}
-    }
-    else
-    {
-        return IX_ETH_DB_NO_PERMISSION;
-    }
-
-    /* update internal structure */
-    ixEthDBPortInfo[portID].maxTxFrameSize = maximumTxFrameSize;
-
-    /* update the maximum frame size in the NPE */
-    return ixEthDBPortFrameLengthsUpdate(portID);
-}
-
-/**
- * @brief sets the port maximum Tx and Rx frame sizes
- *
- * @param portID ID of the port to set the frame size on
- * @param maximumFrameSize maximum Tx and Rx frame sizes
- *
- * This function updates the internal data structures and
- * calls ixEthDBPortFrameLengthsUpdate() for NPE update.
- *
- * Note that both the maximum Tx and Rx frame size are set
- * to the same value. This function is kept for compatibility
- * reasons.
- *
- * This function is fully documented in the main header
- * file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation was
- * successfull or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize)
-{
-    IX_ETH_DB_CHECK_PORT_EXISTS(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    if (!ixEthDBPortInfo[portID].initialized)
-    {
-        return IX_ETH_DB_PORT_UNINITIALIZED;
-    }
-
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE)
-    {
-	if ((maximumFrameSize < IX_ETHDB_MIN_NPE_FRAME_SIZE) ||
-	    (maximumFrameSize > IX_ETHDB_MAX_NPE_FRAME_SIZE))
-	{
-	    return IX_ETH_DB_INVALID_ARG;
-	}
-    }
-    else
-    {
-        return IX_ETH_DB_NO_PERMISSION;
-    }
-
-    /* update internal structure */
-    ixEthDBPortInfo[portID].maxRxFrameSize = maximumFrameSize;
-    ixEthDBPortInfo[portID].maxTxFrameSize = maximumFrameSize;
-
-    /* update the maximum frame size in the NPE */
-    return ixEthDBPortFrameLengthsUpdate(portID);
-}
-
-/**
- * @brief sets the MAC address of an NPE port
- *
- * @param portID port ID to set the MAC address on
- * @param macAddr pointer to the 6-byte MAC address
- *
- * This function is called by the EthAcc
- * ixEthAccUnicastMacAddressSet() and should not be
- * manually invoked unless required by special circumstances.
- *
- * @return IX_ETH_DB_SUCCESS if the operation succeeded
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
-{
-    IxNpeMhMessage message;
-    IX_STATUS result;
-
-    /* use this macro instead CHECK_PORT
-       as the port doesn't need to be enabled */
-    IX_ETH_DB_CHECK_PORT_EXISTS(portID);
-
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-
-    if (!ixEthDBPortInfo[portID].initialized)
-    {
-        return IX_ETH_DB_PORT_UNINITIALIZED;
-    }
-
-    /* Operation stops here when Ethernet Learning is not enabled */
-    if(IX_FEATURE_CTRL_SWCONFIG_DISABLED ==
-       ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING))
-    {
-        return IX_ETH_DB_SUCCESS;
-    }
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    /* exit if the port is not an Ethernet NPE */
-    if (ixEthDBPortDefinitions[portID].type != IX_ETH_NPE)
-    {
-        return IX_ETH_DB_INVALID_PORT;
-    }
-
-    /* populate message */
-    FILL_SETPORTADDRESS_MSG(message, portID, macAddr->macAddress);
-
-    IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Sending SetPortAddress on port %d...\n", portID);
-
-    /* send a SetPortAddress message */
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-
-    if (result == IX_SUCCESS)
-    {
-        ixEthDBPortInfo[portID].macAddressUploaded = true;
-    }
-
-    return result;
-}
diff --git a/drivers/net/npe/IxEthDBCore.c b/drivers/net/npe/IxEthDBCore.c
deleted file mode 100644
index 3d3050d..0000000
--- a/drivers/net/npe/IxEthDBCore.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/**
- * @file IxEthDBDBCore.c
- *
- * @brief Database support functions
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxEthDB_p.h"
-
-/* list of database hashtables */
-IX_ETH_DB_PUBLIC HashTable dbHashtable;
-IX_ETH_DB_PUBLIC MatchFunction matchFunctions[IX_ETH_DB_MAX_KEY_INDEX + 1];
-IX_ETH_DB_PUBLIC BOOL ixEthDBPortUpdateRequired[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1];
-IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyType[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1];
-
-/* private initialization flag */
-IX_ETH_DB_PRIVATE BOOL ethDBInitializationComplete = false;
-
-/**
- * @brief initializes EthDB
- *
- * This function must be called to initialize the component.
- *
- * It does the following things:
- * - checks the port definition structure
- * - scans the capabilities of the NPE images and sets the
- *   capabilities of the ports accordingly
- * - initializes the memory pools internally used in EthDB
- *   for storing database records and handling data
- * - registers automatic update handlers for add and remove
- *   operations
- * - registers hashing match functions, depending on key sets
- * - initializes the main database hashtable
- * - allocates contiguous memory zones to be used for NPE
- *   updates
- * - registers the serialize methods used to convert data
- *   into NPE-readable format
- * - starts the event processor
- *
- * Note that this function is documented in the public
- * component header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS or an appropriate error if the
- * component failed to initialize correctly
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBInit(void)
-{
-    IxEthDBStatus result;
-
-    if (ethDBInitializationComplete)
-    {
-        /* redundant */
-        return IX_ETH_DB_SUCCESS;
-    }
-
-    /* trap an invalid port definition structure */
-    IX_ETH_DB_PORTS_ASSERTION;
-
-    /* memory management */
-    ixEthDBInitMemoryPools();
-
-    /* register hashing search methods */
-    ixEthDBMatchMethodsRegister(matchFunctions);
-
-    /* register type-based automatic port updates */
-    ixEthDBUpdateTypeRegister(ixEthDBPortUpdateRequired);
-
-    /* register record to key type mappings */
-    ixEthDBKeyTypeRegister(ixEthDBKeyType);
-
-    /* hash table */
-    ixEthDBInitHash(&dbHashtable, NUM_BUCKETS, ixEthDBEntryXORHash, matchFunctions, (FreeFunction) ixEthDBFreeMacDescriptor);
-
-    /* NPE update zones */
-    ixEthDBNPEUpdateAreasInit();
-
-    /* register record serialization methods */
-    ixEthDBRecordSerializeMethodsRegister();
-
-    /* start the event processor */
-    result = ixEthDBEventProcessorInit();
-
-    /* scan NPE features */
-    if (result == IX_ETH_DB_SUCCESS)
-    {
-        ixEthDBFeatureCapabilityScan();
-    }
-
-    ethDBInitializationComplete = true;
-
-    return result;
-}
-
-/**
- * @brief prepares EthDB for unloading
- *
- * This function must be called before removing the
- * EthDB component from memory (e.g. doing rmmod in
- * Linux) if the component is to be re-initialized again
- * without rebooting the platform.
- *
- * All the EthDB ports must be disabled before this
- * function is to be called. Failure to disable all
- * the ports will return the IX_ETH_DB_BUSY error.
- *
- * This function will destroy mutexes, deallocate
- * memory and stop the event processor.
- *
- * Note that this function is fully documented in the
- * main component header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if de-initialization
- * completed successfully or an appropriate error
- * message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBUnload(void)
-{
-    IxEthDBPortId portIndex;
-
-    if (!ethDBInitializationComplete)
-    {
-        /* redundant */
-        return IX_ETH_DB_SUCCESS;
-    }
-
-    /* check if any ports are enabled */
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        if (ixEthDBPortInfo[portIndex].enabled)
-        {
-            return IX_ETH_DB_BUSY;
-        }
-    }
-
-    /* free port resources */
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE)
-        {
-            ixOsalMutexDestroy(&ixEthDBPortInfo[portIndex].npeAckLock);
-        }
-
-        ixEthDBPortInfo[portIndex].initialized = false;
-    }
-
-    /* shutdown event processor */
-    ixEthDBStopLearningFunction();
-
-    /* deallocate NPE update zones */
-    ixEthDBNPEUpdateAreasUnload();
-
-    ethDBInitializationComplete = false;
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief adds a new entry to the Ethernet database
- *
- * @param newRecordTemplate address of the record template to use
- * @param updateTrigger port map containing the update triggers
- * resulting from this update operation
- *
- * Creates a new database entry, populates it with the data
- * copied from the given template and adds the record to the
- * database hash table.
- * It also checks whether the new record type is registered to trigger
- * automatic updates; if it is, the update trigger will contain the
- * port on which the record insertion was performed, as well as the
- * old port in case the addition was a record migration (from one port
- * to the other). The caller can use the updateTrigger to trigger
- * automatic updates on the ports changed as a result of this addition.
- *
- * @retval IX_ETH_DB_SUCCESS addition successful
- * @retval IX_ETH_DB_NOMEM insertion failed, no memory left in the mac descriptor memory pool
- * @retval IX_ETH_DB_BUSY database busy, cannot insert due to locking
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBAdd(MacDescriptor *newRecordTemplate, IxEthDBPortMap updateTrigger)
-{
-    IxEthDBStatus result;
-    MacDescriptor *newDescriptor;
-    IxEthDBPortId originalPortID;
-    HashNode *node = NULL;
-
-    BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, ixEthDBKeyType[newRecordTemplate->type], newRecordTemplate, &node));
-
-    TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER;
-
-    if (node == NULL)
-    {
-        /* not found, create a new one */
-        newDescriptor = ixEthDBAllocMacDescriptor();
-
-        if (newDescriptor == NULL)
-        {
-            return IX_ETH_DB_NOMEM; /* no memory */
-        }
-
-        /* old port does not exist, avoid unnecessary updates */
-        originalPortID = newRecordTemplate->portID;
-    }
-    else
-    {
-        /* a node with the same key exists, will update node */
-        newDescriptor = (MacDescriptor *) node->data;
-
-        /* save original port id */
-        originalPortID = newDescriptor->portID;
-    }
-
-    /* copy/update fields into new record */
-    memcpy(newDescriptor->macAddress, newRecordTemplate->macAddress, sizeof (IxEthDBMacAddr));
-    memcpy(&newDescriptor->recordData, &newRecordTemplate->recordData, sizeof (IxEthDBRecordData));
-
-    newDescriptor->type   = newRecordTemplate->type;
-    newDescriptor->portID = newRecordTemplate->portID;
-    newDescriptor->user   = newRecordTemplate->user;
-
-    if (node == NULL)
-    {
-        /* new record, insert into hashtable */
-        BUSY_RETRY_WITH_RESULT(ixEthDBAddHashEntry(&dbHashtable, newDescriptor), result);
-
-        if (result != IX_ETH_DB_SUCCESS)
-        {
-            ixEthDBFreeMacDescriptor(newDescriptor);
-
-            return result; /* insertion failed */
-        }
-    }
-
-    if (node != NULL)
-    {
-        /* release access */
-        ixEthDBReleaseHashNode(node);
-    }
-
-    /* trigger add/remove update if required by type */
-    if (updateTrigger != NULL &&
-        ixEthDBPortUpdateRequired[newRecordTemplate->type])
-    {
-        /* add new port to update list */
-        JOIN_PORT_TO_MAP(updateTrigger, newRecordTemplate->portID);
-
-        /* check if record has moved, we'll need to update the old port as well */
-        if (originalPortID != newDescriptor->portID)
-        {
-            JOIN_PORT_TO_MAP(updateTrigger, originalPortID);
-        }
-    }
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief remove a record from the Ethernet database
- *
- * @param templateRecord template record used to determine
- * what record is to be removed
- * @param updateTrigger port map containing the update triggers
- * resulting from this update operation
- *
- * This function will examine the template record it receives
- * and attempts to delete a record of the same type and containing
- * the same keys as the template record. If deletion is successful
- * and the record type is registered for automatic port updates the
- * port will also be set in the updateTrigger port map, so that the
- * client can perform an update of the port.
- *
- * @retval IX_ETH_DB_SUCCESS removal was successful
- * @retval IX_ETH_DB_NO_SUCH_ADDR the record with the given MAC address was not found
- * @retval IX_ETH_DB_BUSY database busy, cannot remove due to locking
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBRemove(MacDescriptor *templateRecord, IxEthDBPortMap updateTrigger)
-{
-    IxEthDBStatus result;
-
-    TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER;
-
-    BUSY_RETRY_WITH_RESULT(ixEthDBRemoveHashEntry(&dbHashtable, ixEthDBKeyType[templateRecord->type], templateRecord), result);
-
-    if (result != IX_ETH_DB_SUCCESS)
-    {
-        return IX_ETH_DB_NO_SUCH_ADDR; /* not found */
-    }
-
-    /* trigger add/remove update if required by type */
-    if (updateTrigger != NULL
-        &&ixEthDBPortUpdateRequired[templateRecord->type])
-    {
-        /* add new port to update list */
-        JOIN_PORT_TO_MAP(updateTrigger, templateRecord->portID);
-    }
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief register record key types
- *
- * This function registers the appropriate key types,
- * depending on record types.
- *
- * All filtering records use the MAC address as the key.
- * WiFi and Firewall records use a compound key consisting
- * in both the MAC address and the port ID.
- *
- * @return the number of registered record types
- */
-IX_ETH_DB_PUBLIC
-UINT32 ixEthDBKeyTypeRegister(UINT32 *keyType)
-{
-    /* safety */
-    memset(keyType, 0, sizeof (keyType));
-
-    /* register all known record types */
-    keyType[IX_ETH_DB_FILTERING_RECORD]      = IX_ETH_DB_MAC_KEY;
-    keyType[IX_ETH_DB_FILTERING_VLAN_RECORD] = IX_ETH_DB_MAC_KEY;
-    keyType[IX_ETH_DB_ALL_FILTERING_RECORDS] = IX_ETH_DB_MAC_KEY;
-    keyType[IX_ETH_DB_WIFI_RECORD]           = IX_ETH_DB_MAC_PORT_KEY;
-    keyType[IX_ETH_DB_FIREWALL_RECORD]       = IX_ETH_DB_MAC_PORT_KEY;
-
-    return 5;
-}
-
-/**
- * @brief Sets a user-defined field into a database record
- *
- * Note that this function is fully documented in the main component
- * header file.
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field)
-{
-    HashNode *result = NULL;
-
-    if (macAddr == NULL)
-    {
-        return IX_ETH_DB_INVALID_ARG;
-    }
-
-    if (recordType == IX_ETH_DB_FILTERING_RECORD)
-    {
-        result = ixEthDBSearch(macAddr, recordType);
-    }
-    else if (recordType == IX_ETH_DB_FILTERING_VLAN_RECORD)
-    {
-        result = ixEthDBVlanSearch(macAddr, vlanID, recordType);
-    }
-    else if (recordType == IX_ETH_DB_WIFI_RECORD || recordType == IX_ETH_DB_FIREWALL_RECORD)
-    {
-        IX_ETH_DB_CHECK_PORT_EXISTS(portID);
-
-        result = ixEthDBPortSearch(macAddr, portID, recordType);
-    }
-    else
-    {
-        return IX_ETH_DB_INVALID_ARG;
-    }
-
-    if (result == NULL)
-    {
-        return IX_ETH_DB_NO_SUCH_ADDR;
-    }
-
-    ((MacDescriptor *) result->data)->user = field;
-
-    ixEthDBReleaseHashNode(result);
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief Retrieves a user-defined field from a database record
- *
- * Note that this function is fully documented in the main component
- * header file.
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void **field)
-{
-    HashNode *result = NULL;
-
-    if (macAddr == NULL || field == NULL)
-    {
-        return IX_ETH_DB_INVALID_ARG;
-    }
-
-    if (recordType == IX_ETH_DB_FILTERING_RECORD)
-    {
-        result = ixEthDBSearch(macAddr, recordType);
-    }
-    else if (recordType == IX_ETH_DB_FILTERING_VLAN_RECORD)
-    {
-        result = ixEthDBVlanSearch(macAddr, vlanID, recordType);
-    }
-    else if (recordType == IX_ETH_DB_WIFI_RECORD || recordType == IX_ETH_DB_FIREWALL_RECORD)
-    {
-        IX_ETH_DB_CHECK_PORT_EXISTS(portID);
-
-        result = ixEthDBPortSearch(macAddr, portID, recordType);
-    }
-    else
-    {
-        return IX_ETH_DB_INVALID_ARG;
-    }
-
-    if (result == NULL)
-    {
-        return IX_ETH_DB_NO_SUCH_ADDR;
-    }
-
-    *field = ((MacDescriptor *) result->data)->user;
-
-    ixEthDBReleaseHashNode(result);
-
-    return IX_ETH_DB_SUCCESS;
-}
diff --git a/drivers/net/npe/IxEthDBEvents.c b/drivers/net/npe/IxEthDBEvents.c
deleted file mode 100644
index 5b3be0b..0000000
--- a/drivers/net/npe/IxEthDBEvents.c
+++ /dev/null
@@ -1,496 +0,0 @@
-/**
- * @file IxEthDBEvents.c
- *
- * @brief Implementation of the event processor component
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include <IxNpeMh.h>
-#include <IxFeatureCtrl.h>
-
-#include "IxEthDB_p.h"
-
-/* forward prototype declarations */
-IX_ETH_DB_PUBLIC void ixEthDBEventProcessorLoop(void *); 
-IX_ETH_DB_PUBLIC void ixEthDBNPEEventCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg);
-IX_ETH_DB_PRIVATE void ixEthDBProcessEvent(PortEvent *local_event, IxEthDBPortMap triggerPorts);
-IX_ETH_DB_PRIVATE IxEthDBStatus ixEthDBTriggerPortUpdate(UINT32 eventType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStartLearningFunction(void);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStopLearningFunction(void);
-
-/* data */
-IX_ETH_DB_PRIVATE IxOsalSemaphore eventQueueSemaphore;
-IX_ETH_DB_PRIVATE PortEventQueue eventQueue;
-IX_ETH_DB_PRIVATE IxOsalMutex eventQueueLock;
-IX_ETH_DB_PRIVATE IxOsalMutex portUpdateLock;
-
-IX_ETH_DB_PRIVATE BOOL ixEthDBLearningShutdown      = false;
-IX_ETH_DB_PRIVATE BOOL ixEthDBEventProcessorRunning = false;
-
-/* imported data */
-extern HashTable dbHashtable;
-
-/**
- * @brief initializes the event processor
- *
- * Initializes the event processor queue and processing thread.
- * Called from ixEthDBInit() DB-subcomponent master init function.
- *
- * @warning do not call directly
- *
- * @retval IX_ETH_DB_SUCCESS initialization was successful
- * @retval IX_ETH_DB_FAIL initialization failed (OSAL or mutex init failure)
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBEventProcessorInit(void)
-{
-    if (ixOsalMutexInit(&portUpdateLock) != IX_SUCCESS)
-    {
-        return IX_ETH_DB_FAIL;
-    }
-
-    if (ixOsalMutexInit(&eventQueueLock) != IX_SUCCESS)
-    {
-        return IX_ETH_DB_FAIL;
-    }
-
-    if (IX_FEATURE_CTRL_SWCONFIG_ENABLED ==
-        ixFeatureCtrlSwConfigurationCheck (IX_FEATURECTRL_ETH_LEARNING))
-    {
-
-        /* start processor loop thread */
-        if (ixEthDBStartLearningFunction() != IX_ETH_DB_SUCCESS)
-        {
-            return IX_ETH_DB_FAIL;
-        }
-    }
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief initializes the event queue and the event processor
- *
- * This function is called by the component initialization
- * function, ixEthDBInit().
- *
- * @warning do not call directly
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or IX_ETH_DB_FAIL otherwise
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBStartLearningFunction(void)
-{
-    IxOsalThread eventProcessorThread;
-    IxOsalThreadAttr threadAttr;
-
-    threadAttr.name      = "EthDB event thread";
-    threadAttr.stackSize = 32 * 1024; /* 32kbytes */
-    threadAttr.priority  = 128;
-
-    /* reset event queue */
-    ixOsalMutexLock(&eventQueueLock, IX_OSAL_WAIT_FOREVER);
-
-    RESET_QUEUE(&eventQueue);
-
-    ixOsalMutexUnlock(&eventQueueLock);
-
-    /* init event queue semaphore */
-    if (ixOsalSemaphoreInit(&eventQueueSemaphore, 0) != IX_SUCCESS)
-    {
-        return IX_ETH_DB_FAIL;
-    }
-
-    ixEthDBLearningShutdown = false;
-
-    /* create processor loop thread */
-    if (ixOsalThreadCreate(&eventProcessorThread, &threadAttr, ixEthDBEventProcessorLoop, NULL) != IX_SUCCESS)
-    {
-        return IX_ETH_DB_FAIL;
-    }
-
-    /* start event processor */
-    ixOsalThreadStart(&eventProcessorThread);
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief stops the event processor
- *
- * Stops the event processor and frees the event queue semaphore
- * Called by the component de-initialization function, ixEthDBUnload()
- *
- * @warning do not call directly
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed 
- * successfully or IX_ETH_DB_FAIL otherwise;
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBStopLearningFunction(void)
-{
-    ixEthDBLearningShutdown = true;
-
-    /* wake up event processing loop to actually process the shutdown event */
-    ixOsalSemaphorePost(&eventQueueSemaphore);
-
-    if (ixOsalSemaphoreDestroy(&eventQueueSemaphore) != IX_SUCCESS)
-    {
-        return IX_ETH_DB_FAIL;
-    }
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief default NPE event processing callback
- *
- * @param npeID ID of the NPE that generated the event
- * @param msg NPE message (encapsulated event)
- *
- * Creates an event object on the Ethernet event processor queue
- * and signals the new event by incrementing the event queue semaphore.
- * Events are processed by @ref ixEthDBEventProcessorLoop() which runs
- * at user level.
- *
- * @see ixEthDBEventProcessorLoop()
- *
- * @warning do not call directly
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBNPEEventCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg)
-{
-    PortEvent *local_event;
-
-    IX_ETH_DB_IRQ_EVENTS_TRACE("DB: (Events) new event received by processor callback from port %d, id 0x%X\n", IX_ETH_DB_NPE_TO_PORT_ID(npeID), NPE_MSG_ID(msg), 0, 0, 0, 0);
-
-    if (CAN_ENQUEUE(&eventQueue))
-    {
-        TEST_FIXTURE_LOCK_EVENT_QUEUE;
-
-        local_event = QUEUE_HEAD(&eventQueue);
-
-        /* create event structure on queue */
-        local_event->eventType = NPE_MSG_ID(msg);
-        local_event->portID    = IX_ETH_DB_NPE_TO_PORT_ID(npeID);
-        
-        /* update queue */
-        PUSH_UPDATE_QUEUE(&eventQueue);
-
-        TEST_FIXTURE_UNLOCK_EVENT_QUEUE;
-
-        IX_ETH_DB_IRQ_EVENTS_TRACE("DB: (Events) Waking up main processor loop...\n", 0, 0, 0, 0, 0, 0);
-
-        /* increment event queue semaphore */
-        ixOsalSemaphorePost(&eventQueueSemaphore);
-    }
-    else
-    {
-        IX_ETH_DB_IRQ_EVENTS_TRACE("DB: (Events) Warning: could not enqueue event (overflow)\n", 0, 0, 0, 0, 0, 0);
-    }
-}
-
-/**
- * @brief Ethernet event processor loop
- *
- * Extracts at most EVENT_PROCESSING_LIMIT batches of events and
- * sends them for processing to @ref ixEthDBProcessEvent().
- * Triggers port updates which normally follow learning events.
- *
- * @warning do not call directly, executes in separate thread
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBEventProcessorLoop(void *unused1)
-{
-    IxEthDBPortMap triggerPorts;
-    IxEthDBPortId portIndex;
-
-    ixEthDBEventProcessorRunning = true;
-
-    IX_ETH_DB_EVENTS_TRACE("DB: (Events) Event processor loop was started\n");
-
-    while (!ixEthDBLearningShutdown)
-    {
-        BOOL keepProcessing    = true;
-        UINT32 processedEvents = 0;
-
-        IX_ETH_DB_EVENTS_VERBOSE_TRACE("DB: (Events) Waiting for new learning event...\n");
-
-        ixOsalSemaphoreWait(&eventQueueSemaphore, IX_OSAL_WAIT_FOREVER);
-
-        IX_ETH_DB_EVENTS_VERBOSE_TRACE("DB: (Events) Received new event\n");
-
-        if (!ixEthDBLearningShutdown)
-        {
-            /* port update handling */
-            SET_EMPTY_DEPENDENCY_MAP(triggerPorts);
-
-            while (keepProcessing)
-            {
-                PortEvent local_event;
-                UINT32 intLockKey;
-
-                /* lock queue */
-                ixOsalMutexLock(&eventQueueLock, IX_OSAL_WAIT_FOREVER);
-
-                /* lock NPE interrupts */
-                intLockKey = ixOsalIrqLock();
-
-                /* extract event */
-                local_event = *(QUEUE_TAIL(&eventQueue));
-
-                SHIFT_UPDATE_QUEUE(&eventQueue);
-
-                ixOsalIrqUnlock(intLockKey);
-
-                ixOsalMutexUnlock(&eventQueueLock);
-
-                IX_ETH_DB_EVENTS_TRACE("DB: (Events) Processing event with ID 0x%X\n", local_event.eventType);
-
-                ixEthDBProcessEvent(&local_event, triggerPorts);
-
-                processedEvents++;
-
-                if (processedEvents > EVENT_PROCESSING_LIMIT /* maximum burst reached? */
-                    || ixOsalSemaphoreTryWait(&eventQueueSemaphore) != IX_SUCCESS) /* or empty queue? */
-                {
-                    keepProcessing = false;
-                }
-            }
-
-            ixEthDBUpdatePortLearningTrees(triggerPorts);
-        }
-    }
-
-    /* turn off automatic updates */
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = false;
-    }
-
-    ixEthDBEventProcessorRunning = false;
-}
-
-/**
- * @brief event processor routine
- *
- * @param event event to be processed
- * @param triggerPorts port map accumulating ports to be updated
- *
- * Processes learning events by synchronizing the database with
- * newly learnt data. Called only by @ref ixEthDBEventProcessorLoop().
- *
- * @warning do not call directly
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBProcessEvent(PortEvent *local_event, IxEthDBPortMap triggerPorts)
-{
-    MacDescriptor recordTemplate;
-
-    switch (local_event->eventType)
-    {
-        case IX_ETH_DB_ADD_FILTERING_RECORD:
-            /* add record */
-            memset(&recordTemplate, 0, sizeof (recordTemplate));
-            memcpy(recordTemplate.macAddress, local_event->macAddr.macAddress, sizeof (IxEthDBMacAddr));
-            
-            recordTemplate.type   = IX_ETH_DB_FILTERING_RECORD;
-            recordTemplate.portID = local_event->portID;
-            recordTemplate.recordData.filteringData.staticEntry = local_event->staticEntry;
-            
-            ixEthDBAdd(&recordTemplate, triggerPorts);
-
-            IX_ETH_DB_EVENTS_TRACE("DB: (Events) Added record on port %d\n", local_event->portID);
-
-            break;
-
-        case IX_ETH_DB_REMOVE_FILTERING_RECORD:
-            /* remove record */
-            memset(&recordTemplate, 0, sizeof (recordTemplate));
-            memcpy(recordTemplate.macAddress, local_event->macAddr.macAddress, sizeof (IxEthDBMacAddr));
-            
-            recordTemplate.type = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD;
-            
-            ixEthDBRemove(&recordTemplate, triggerPorts);
-            
-            IX_ETH_DB_EVENTS_TRACE("DB: (Events) Removed record on port %d\n", local_event->portID);
-
-            break;
-
-        default:
-            /* can't handle/not interested in this event type */
-            ERROR_LOG("DB: (Events) Event processor received an unknown event type (0x%X)\n", local_event->eventType);
-
-            return;
-    }
-}
-
-/**
- * @brief asynchronously adds a filtering record
- * by posting an ADD_FILTERING_RECORD event to the event queue
- *
- * @param macAddr MAC address of the new record
- * @param portID port ID of the new record
- * @param staticEntry true if record is static, false if dynamic
- *
- * @return IX_ETH_DB_SUCCESS if the event creation was
- * successfull or IX_ETH_DB_BUSY if the event queue is full
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBTriggerAddPortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry)
-{
-    MacDescriptor reference;
-    
-    TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER;
-
-    /* fill search fields */
-    memcpy(reference.macAddress, macAddr, sizeof (IxEthDBMacAddr));
-    reference.portID = portID;
-    
-    /* set acceptable record types */
-    reference.type = IX_ETH_DB_ALL_FILTERING_RECORDS;
-
-    if (ixEthDBPeekHashEntry(&dbHashtable, IX_ETH_DB_MAC_PORT_KEY, &reference) == IX_ETH_DB_SUCCESS)
-    {
-        /* already have an identical record */
-        return IX_ETH_DB_SUCCESS;
-    }
-    else
-    {
-        return ixEthDBTriggerPortUpdate(IX_ETH_DB_ADD_FILTERING_RECORD, macAddr, portID, staticEntry);
-    }
-}
-
-/**
- * @brief asynchronously removes a filtering record
- * by posting a REMOVE_FILTERING_RECORD event to the event queue
- *
- * @param macAddr MAC address of the record to remove
- * @param portID port ID of the record to remove
- *
- * @return IX_ETH_DB_SUCCESS if the event creation was
- * successfull or IX_ETH_DB_BUSY if the event queue is full
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBTriggerRemovePortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID)
-{
-    if (ixEthDBPeek(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS) != IX_ETH_DB_NO_SUCH_ADDR)
-    {
-        return ixEthDBTriggerPortUpdate(IX_ETH_DB_REMOVE_FILTERING_RECORD, macAddr, portID, false);
-    }
-    else
-    {
-        return IX_ETH_DB_NO_SUCH_ADDR;
-    }
-}
-
-/**
- * @brief adds an ADD or REMOVE event to the main event queue
- *
- * @param eventType event type - IX_ETH_DB_ADD_FILTERING_RECORD 
- * to add and IX_ETH_DB_REMOVE_FILTERING_RECORD to remove a
- * record.
- *
- * @return IX_ETH_DB_SUCCESS if the event was successfully
- * sent or IX_ETH_DB_BUSY if the event queue is full
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-IxEthDBStatus ixEthDBTriggerPortUpdate(UINT32 eventType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry)
-{
-    UINT32 intLockKey;
-
-    /* lock interrupts to protect queue */
-    intLockKey = ixOsalIrqLock();
-
-    if (CAN_ENQUEUE(&eventQueue))
-    {
-        PortEvent *queueEvent = QUEUE_HEAD(&eventQueue);
-
-        /* update fields on the queue */
-        memcpy(queueEvent->macAddr.macAddress, macAddr->macAddress, sizeof (IxEthDBMacAddr));
-        
-        queueEvent->eventType     = eventType;
-        queueEvent->portID        = portID;
-        queueEvent->staticEntry   = staticEntry;
-
-        PUSH_UPDATE_QUEUE(&eventQueue);
-
-        /* imcrement event queue semaphore */
-        ixOsalSemaphorePost(&eventQueueSemaphore);
-        
-        /* unlock interrupts */
-        ixOsalIrqUnlock(intLockKey);
-
-        return IX_ETH_DB_SUCCESS;
-    }
-    else /* event queue full */
-    {
-        /* unlock interrupts */
-        ixOsalIrqUnlock(intLockKey);
-
-        return IX_ETH_DB_BUSY;
-    }
-}
-
-/**
- * @brief Locks learning tree updates and port disable
- *
- *
- * This function locks portUpdateLock single mutex. It is primarily used
- * to avoid executing 'port disable' during ELT maintenance.
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBUpdateLock(void)
-{
-    ixOsalMutexLock(&portUpdateLock, IX_OSAL_WAIT_FOREVER);
-}
-
-/**
- * @brief Unlocks learning tree updates and port disable
- *
- *
- * This function unlocks a portUpdateLock mutex. It is primarily used
- * to avoid executing 'port disable' during ELT maintenance.
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBUpdateUnlock(void)
-{
-    ixOsalMutexUnlock(&portUpdateLock);
-}
-
diff --git a/drivers/net/npe/IxEthDBFeatures.c b/drivers/net/npe/IxEthDBFeatures.c
deleted file mode 100644
index 1f76240..0000000
--- a/drivers/net/npe/IxEthDBFeatures.c
+++ /dev/null
@@ -1,638 +0,0 @@
-/**
- * @file IxEthDBFeatures.c
- *
- * @brief Implementation of the EthDB feature control API
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxNpeDl.h"
-#include "IxEthDBQoS.h"
-#include "IxEthDB_p.h"
-
-/**
- * @brief scans the capabilities of the loaded NPE images
- *
- * This function MUST be called by the ixEthDBInit() function.
- * No EthDB features (including learning and filtering) are enabled
- * before this function is called.
- *
- * @return none
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBFeatureCapabilityScan(void)
-{
-    IxNpeDlImageId imageId, npeAImageId;
-    IxEthDBPortId portIndex;
-    PortInfo *portInfo;
-    IxEthDBPriorityTable defaultPriorityTable;
-    IX_STATUS result;
-    UINT32 queueIndex;
-    UINT32 queueStructureIndex;
-    UINT32 trafficClassDefinitionIndex;
-
-    /* read version of NPE A - required to set the AQM queues for B and C */
-    npeAImageId.functionalityId = 0;
-    ixNpeDlLoadedImageGet(IX_NPEDL_NPEID_NPEA, &npeAImageId);
-
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        IxNpeMhMessage msg;
-
-        portInfo = &ixEthDBPortInfo[portIndex];
-
-        /* check and bypass if NPE B or C is fused out */
-        if (ixEthDBSingleEthNpeCheck(portIndex) != IX_ETH_DB_SUCCESS) continue;
-
-        /* all ports are capable of LEARNING by default */
-        portInfo->featureCapability |= IX_ETH_DB_LEARNING;
-        portInfo->featureStatus     |= IX_ETH_DB_LEARNING;
-
-        if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE)
-        {
-
-            if (ixNpeDlLoadedImageGet(IX_ETH_DB_PORT_ID_TO_NPE(portIndex), &imageId) != IX_SUCCESS)
-            {
-                WARNING_LOG("DB: (FeatureScan) NpeDl did not provide the image ID for NPE port %d\n", portIndex);
-            }
-            else
-            {
-                /* initialize and empty NPE response mutex */
-                ixOsalMutexInit(&portInfo->npeAckLock);
-                ixOsalMutexLock(&portInfo->npeAckLock, IX_OSAL_WAIT_FOREVER);
-
-                /* check NPE response to GetStatus */
-                msg.data[0] = IX_ETHNPE_NPE_GETSTATUS << 24;
-                msg.data[1] = 0;
-                IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portIndex), msg, result);
-                if (result != IX_SUCCESS)
-                {
-                    WARNING_LOG("DB: (FeatureScan) warning, could not send message to the NPE\n");
-                    continue;
-                }
-
-
-                if (imageId.functionalityId == 0x00
-                    || imageId.functionalityId == 0x03
-                    || imageId.functionalityId == 0x04
-                    || imageId.functionalityId == 0x80)
-                {
-                    portInfo->featureCapability |= IX_ETH_DB_FILTERING;
-                    portInfo->featureCapability |= IX_ETH_DB_FIREWALL;
-                    portInfo->featureCapability |= IX_ETH_DB_SPANNING_TREE_PROTOCOL;
-                }
-                else if (imageId.functionalityId == 0x01
-                         || imageId.functionalityId == 0x81)
-                {
-                    portInfo->featureCapability |= IX_ETH_DB_FILTERING;
-                    portInfo->featureCapability |= IX_ETH_DB_FIREWALL;
-                    portInfo->featureCapability |= IX_ETH_DB_SPANNING_TREE_PROTOCOL;
-                    portInfo->featureCapability |= IX_ETH_DB_VLAN_QOS;
-                }
-                else if (imageId.functionalityId == 0x02
-                         || imageId.functionalityId == 0x82)
-                {
-                    portInfo->featureCapability |= IX_ETH_DB_WIFI_HEADER_CONVERSION;
-                    portInfo->featureCapability |= IX_ETH_DB_FIREWALL;
-                    portInfo->featureCapability |= IX_ETH_DB_SPANNING_TREE_PROTOCOL;
-                    portInfo->featureCapability |= IX_ETH_DB_VLAN_QOS;
-                }
-
-                /* reset AQM queues */
-                memset(portInfo->ixEthDBTrafficClassAQMAssignments, 0, sizeof (portInfo->ixEthDBTrafficClassAQMAssignments));
-
-                /* ensure there's at least one traffic class record in the definition table, otherwise we have no default case, hence no queues */
-                IX_ENSURE(sizeof (ixEthDBTrafficClassDefinitions) != 0, "DB: no traffic class definitions found, check IxEthDBQoS.h");
-
-                /* find the traffic class definition index compatible with the current NPE A functionality ID */
-                for (trafficClassDefinitionIndex = 0 ;
-                    trafficClassDefinitionIndex < ARRAY_SIZE(ixEthDBTrafficClassDefinitions);
-                    trafficClassDefinitionIndex++)
-                {
-                    if (ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_NPE_A_FUNCTIONALITY_ID_INDEX] == npeAImageId.functionalityId)
-                    {
-                        /* found it */
-                        break;
-                    }
-                }
-
-                /* select the default case if we went over the array boundary */
-                if (trafficClassDefinitionIndex == ARRAY_SIZE(ixEthDBTrafficClassDefinitions))
-                {
-                    trafficClassDefinitionIndex = 0; /* the first record is the default case */
-                }
-
-                /* select queue assignment structure based on the traffic class configuration index */
-                queueStructureIndex = ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_QUEUE_ASSIGNMENT_INDEX];
-
-                /* only traffic class 0 is active at initialization time */
-                portInfo->ixEthDBTrafficClassCount = 1;
-
-                /* enable port, VLAN and Firewall feature bits to initialize QoS/VLAN/Firewall configuration */
-                portInfo->featureStatus |= IX_ETH_DB_VLAN_QOS;
-                portInfo->featureStatus |= IX_ETH_DB_FIREWALL;
-                portInfo->enabled        = true;
-
-#define CONFIG_WITH_VLAN  /* test-only: VLAN support not included to save space!!! */
-#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */
-                /* set VLAN initial configuration (permissive) */
-                if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0) /* QoS-enabled image */
-                {
-                    /* QoS capable */
-                    portInfo->ixEthDBTrafficClassAvailable = ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_TRAFFIC_CLASS_COUNT_INDEX];
-
-                    /* set AQM queues */
-                    for (queueIndex = 0 ; queueIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; queueIndex++)
-                    {
-                        portInfo->ixEthDBTrafficClassAQMAssignments[queueIndex] = ixEthDBQueueAssignments[queueStructureIndex][queueIndex];
-                    }
-
-                    /* set default PVID (0) and default traffic class 0 */
-                    ixEthDBPortVlanTagSet(portIndex, 0);
-
-                    /* enable reception of all frames */
-                    ixEthDBAcceptableFrameTypeSet(portIndex, IX_ETH_DB_ACCEPT_ALL_FRAMES);
-
-                    /* clear full VLAN membership */
-                    ixEthDBPortVlanMembershipRangeRemove(portIndex, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID);
-
-                    /* clear TTI table - no VLAN tagged frames will be transmitted */
-                    ixEthDBEgressVlanRangeTaggingEnabledSet(portIndex, 0, 4094, false);
-
-                    /* set membership on 0, otherwise no Tx or Rx is working */
-                    ixEthDBPortVlanMembershipAdd(portIndex, 0);
-                }
-                else /* QoS not available in this image */
-#endif /* test-only */
-                {
-                    /* initialize traffic class availability (only class 0 is available) */
-                    portInfo->ixEthDBTrafficClassAvailable = 1;
-
-                    /* point all AQM queues to traffic class 0 */
-                    for (queueIndex = 0 ; queueIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; queueIndex++)
-                    {
-                        portInfo->ixEthDBTrafficClassAQMAssignments[queueIndex] =
-                            ixEthDBQueueAssignments[queueStructureIndex][0];
-                    }
-                }
-
-#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */
-                /* download priority mapping table and Rx queue configuration */
-                memset (defaultPriorityTable, 0, sizeof (defaultPriorityTable));
-                ixEthDBPriorityMappingTableSet(portIndex, defaultPriorityTable);
-#endif
-
-                /* by default we turn off invalid source MAC address filtering */
-                ixEthDBFirewallInvalidAddressFilterEnable(portIndex, false);
-
-                /* disable port, VLAN, Firewall feature bits */
-                portInfo->featureStatus &= ~IX_ETH_DB_VLAN_QOS;
-                portInfo->featureStatus &= ~IX_ETH_DB_FIREWALL;
-                portInfo->enabled        = false;
-
-                /* enable filtering by default if present */
-                if ((portInfo->featureCapability & IX_ETH_DB_FILTERING) != 0)
-                {
-                    portInfo->featureStatus |= IX_ETH_DB_FILTERING;
-                }
-            }
-        }
-    }
-}
-
-/**
- * @brief returns the capability of a port
- *
- * @param portID ID of the port
- * @param featureSet location to store the port capability in
- *
- * This function will save the capability set of the given port
- * into the given location. Capabilities are bit-ORed, each representing
- * a bit of the feature set.
- *
- * Note that this function is documented in the main component
- * public header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or IX_ETH_DB_INVALID_PORT if the given port is invalid
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet)
-{
-    IX_ETH_DB_CHECK_PORT_INITIALIZED(portID);
-
-    IX_ETH_DB_CHECK_REFERENCE(featureSet);
-
-    *featureSet = ixEthDBPortInfo[portID].featureCapability;
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief enables or disables a port capability
- *
- * @param portID ID of the port
- * @param feature feature to enable or disable
- * @param enabled true to enable the selected feature or false to disable it
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enable)
-{
-    PortInfo *portInfo;
-    IxEthDBPriorityTable defaultPriorityTable;
-    IxEthDBVlanSet vlanSet;
-    IxEthDBStatus status = IX_ETH_DB_SUCCESS;
-    BOOL portEnabled;
-
-    IX_ETH_DB_CHECK_PORT_INITIALIZED(portID);
-
-    portInfo    = &ixEthDBPortInfo[portID];
-    portEnabled = portInfo->enabled;
-
-    /* check that only one feature is selected */
-    if (!ixEthDBCheckSingleBitValue(feature))
-    {
-        return IX_ETH_DB_FEATURE_UNAVAILABLE;
-    }
-
-    /* port capable of this feature? */
-    if ((portInfo->featureCapability & feature) == 0)
-    {
-        return IX_ETH_DB_FEATURE_UNAVAILABLE;
-    }
-
-    /* mutual exclusion between learning and WiFi header conversion */
-    if (enable && ((feature | portInfo->featureStatus) & (IX_ETH_DB_FILTERING | IX_ETH_DB_WIFI_HEADER_CONVERSION))
-            == (IX_ETH_DB_FILTERING | IX_ETH_DB_WIFI_HEADER_CONVERSION))
-    {
-        return IX_ETH_DB_NO_PERMISSION;
-    }
-
-    /* learning must be enabled before filtering */
-    if (enable && (feature == IX_ETH_DB_FILTERING) && ((portInfo->featureStatus & IX_ETH_DB_LEARNING) == 0))
-    {
-        return IX_ETH_DB_NO_PERMISSION;
-    }
-
-    /* filtering must be disabled before learning */
-    if (!enable && (feature == IX_ETH_DB_LEARNING) && ((portInfo->featureStatus & IX_ETH_DB_FILTERING) != 0))
-    {
-        return IX_ETH_DB_NO_PERMISSION;
-    }
-
-    /* redundant enabling or disabling */
-    if ((!enable && ((portInfo->featureStatus & feature) == 0))
-        || (enable && ((portInfo->featureStatus & feature) != 0)))
-    {
-        /* do nothing */
-        return IX_ETH_DB_SUCCESS;
-    }
-
-    /* force port enabled */
-    portInfo->enabled = true;
-
-    if (enable)
-    {
-        /* turn on enable bit */
-        portInfo->featureStatus |= feature;
-
-#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */
-        /* if this is VLAN/QoS set the default priority table */
-        if (feature == IX_ETH_DB_VLAN_QOS)
-        {
-            /* turn on VLAN/QoS (most permissive mode):
-                - set default 802.1Q priority mapping table, in accordance to the
-                  availability of traffic classes
-                - set the acceptable frame filter to accept all
-                - set the Ingress tagging mode to pass-through
-                - set full VLAN membership list
-                - set full TTI table
-                - set the default 802.1Q tag to 0 (VLAN ID 0, Pri 0, CFI 0)
-                - enable TPID port extraction
-            */
-
-            portInfo->ixEthDBTrafficClassCount = portInfo->ixEthDBTrafficClassAvailable;
-
-            /* set default 802.1Q priority mapping table - note that C indexing starts from 0, so we substract 1 here */
-            memcpy (defaultPriorityTable,
-                (const void *) ixEthIEEE802_1QUserPriorityToTrafficClassMapping[portInfo->ixEthDBTrafficClassCount - 1],
-                sizeof (defaultPriorityTable));
-
-            /* update priority mapping and AQM queue assignments */
-            status = ixEthDBPriorityMappingTableSet(portID, defaultPriorityTable);
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBAcceptableFrameTypeSet(portID, IX_ETH_DB_ACCEPT_ALL_FRAMES);
-            }
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBIngressVlanTaggingEnabledSet(portID, IX_ETH_DB_PASS_THROUGH);
-            }
-
-            /* set membership and TTI tables */
-            memset (vlanSet, 0xFF, sizeof (vlanSet));
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                /* use the internal function to bypass PVID check */
-                status = ixEthDBPortVlanTableSet(portID, portInfo->vlanMembership, vlanSet);
-            }
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                /* use the internal function to bypass PVID check */
-                status = ixEthDBPortVlanTableSet(portID, portInfo->transmitTaggingInfo, vlanSet);
-            }
-
-            /* reset the PVID */
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBPortVlanTagSet(portID, 0);
-            }
-
-            /* enable TPID port extraction */
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBVlanPortExtractionEnable(portID, true);
-            }
-        }
-        else if (feature == IX_ETH_DB_FIREWALL)
-#endif
-        {
-            /* firewall starts in black-list mode unless otherwise configured before *
-             * note that invalid source MAC address filtering is disabled by default */
-            if (portInfo->firewallMode != IX_ETH_DB_FIREWALL_BLACK_LIST
-                && portInfo->firewallMode != IX_ETH_DB_FIREWALL_WHITE_LIST)
-            {
-                status = ixEthDBFirewallModeSet(portID, IX_ETH_DB_FIREWALL_BLACK_LIST);
-
-                if (status == IX_ETH_DB_SUCCESS)
-                {
-                    status = ixEthDBFirewallInvalidAddressFilterEnable(portID, false);
-                }
-            }
-        }
-
-        if (status != IX_ETH_DB_SUCCESS)
-        {
-            /* checks failed, disable */
-            portInfo->featureStatus &= ~feature;
-        }
-    }
-    else
-    {
-        /* turn off features */
-        if (feature == IX_ETH_DB_FIREWALL)
-        {
-            /* turning off the firewall is equivalent to:
-                - set to black-list mode
-                - clear all the entries and download the new table
-                - turn off the invalid source address checking
-            */
-
-            status = ixEthDBDatabaseClear(portID, IX_ETH_DB_FIREWALL_RECORD);
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBFirewallModeSet(portID, IX_ETH_DB_FIREWALL_BLACK_LIST);
-            }
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBFirewallInvalidAddressFilterEnable(portID, false);
-            }
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBFirewallTableDownload(portID);
-            }
-        }
-        else if (feature == IX_ETH_DB_WIFI_HEADER_CONVERSION)
-        {
-            /* turn off header conversion */
-            status = ixEthDBDatabaseClear(portID, IX_ETH_DB_WIFI_RECORD);
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBWiFiConversionTableDownload(portID);
-            }
-        }
-#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */
-        else if (feature == IX_ETH_DB_VLAN_QOS)
-        {
-            /* turn off VLAN/QoS:
-                - set a priority mapping table with one traffic class
-                - set the acceptable frame filter to accept all
-                - set the Ingress tagging mode to pass-through
-                - clear the VLAN membership list
-                - clear the TTI table
-                - set the default 802.1Q tag to 0 (VLAN ID 0, Pri 0, CFI 0)
-                - disable TPID port extraction
-            */
-
-            /* initialize all => traffic class 0 priority mapping table */
-            memset (defaultPriorityTable, 0, sizeof (defaultPriorityTable));
-            portInfo->ixEthDBTrafficClassCount = 1;
-            status = ixEthDBPriorityMappingTableSet(portID, defaultPriorityTable);
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBAcceptableFrameTypeSet(portID, IX_ETH_DB_ACCEPT_ALL_FRAMES);
-            }
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBIngressVlanTaggingEnabledSet(portID, IX_ETH_DB_PASS_THROUGH);
-            }
-
-            /* clear membership and TTI tables */
-            memset (vlanSet, 0, sizeof (vlanSet));
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                /* use the internal function to bypass PVID check */
-                status = ixEthDBPortVlanTableSet(portID, portInfo->vlanMembership, vlanSet);
-            }
-
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                /* use the internal function to bypass PVID check */
-                status = ixEthDBPortVlanTableSet(portID, portInfo->transmitTaggingInfo, vlanSet);
-            }
-
-            /* reset the PVID */
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBPortVlanTagSet(portID, 0);
-            }
-
-            /* disable TPID port extraction */
-            if (status == IX_ETH_DB_SUCCESS)
-            {
-                status = ixEthDBVlanPortExtractionEnable(portID, false);
-            }
-        }
-#endif
-
-        if (status == IX_ETH_DB_SUCCESS)
-        {
-            /* checks passed, disable */
-            portInfo->featureStatus &= ~feature;
-        }
-    }
-
-    /* restore port enabled state */
-    portInfo->enabled = portEnabled;
-
-    return status;
-}
-
-/**
- * @brief returns the status of a feature
- *
- * @param portID port ID
- * @param present location to store a boolean value indicating
- * if the feature is present (true) or not (false)
- * @param enabled location to store a booleam value indicating
- * if the feature is present (true) or not (false)
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled)
-{
-    PortInfo *portInfo;
-
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_REFERENCE(present);
-
-    IX_ETH_DB_CHECK_REFERENCE(enabled);
-
-    portInfo = &ixEthDBPortInfo[portID];
-
-    *present = (portInfo->featureCapability & feature) != 0;
-    *enabled = (portInfo->featureStatus & feature) != 0;
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief returns the value of an EthDB property
- *
- * @param portID ID of the port
- * @param feature feature owning the property
- * @param property ID of the property
- * @param type location to store the property type into
- * @param value location to store the property value into
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value)
-{
-    IX_ETH_DB_CHECK_PORT_EXISTS(portID);
-
-    IX_ETH_DB_CHECK_REFERENCE(type);
-
-    IX_ETH_DB_CHECK_REFERENCE(value);
-
-    if (feature == IX_ETH_DB_VLAN_QOS)
-    {
-        if (property == IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY)
-        {
-            * (UINT32 *) value = ixEthDBPortInfo[portID].ixEthDBTrafficClassCount;
-            *type              = IX_ETH_DB_INTEGER_PROPERTY;
-
-            return IX_ETH_DB_SUCCESS;
-        }
-        else if (property >= IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY
-            && property <= IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY)
-        {
-            UINT32 classDelta = property - IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY;
-
-            if (classDelta >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount)
-            {
-                return IX_ETH_DB_FAIL;
-            }
-
-            * (UINT32 *) value = ixEthDBPortInfo[portID].ixEthDBTrafficClassAQMAssignments[classDelta];
-            *type              = IX_ETH_DB_INTEGER_PROPERTY;
-
-            return IX_ETH_DB_SUCCESS;
-        }
-    }
-
-    return IX_ETH_DB_INVALID_ARG;
-}
-
-/**
- * @brief sets the value of an EthDB property
- *
- * @param portID ID of the port
- * @param feature feature owning the property
- * @param property ID of the property
- * @param value location containing the property value
- *
- * This function implements a private property intended
- * only for EthAcc usage. Upon setting the IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE
- * property (the value is ignored), the availability of traffic classes is
- * frozen to whatever traffic class structure is currently in use.
- * This means that if VLAN_QOS has been enabled before EthAcc
- * initialization then all the defined traffic classes will be available;
- * otherwise only one traffic class (0) will be available.
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h as not accepting any parameters. The
- * current implementation is only intended for the private use of EthAcc.
- *
- * Also note that once this function is called the effect is irreversible,
- * unless EthDB is complete unloaded and re-initialized.
- *
- * @return IX_ETH_DB_INVALID_ARG (no read-write properties are
- * supported in this release)
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value)
-{
-    IX_ETH_DB_CHECK_PORT_EXISTS(portID);
-
-    if ((feature == IX_ETH_DB_VLAN_QOS) && (property == IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE))
-    {
-        ixEthDBPortInfo[portID].ixEthDBTrafficClassAvailable = ixEthDBPortInfo[portID].ixEthDBTrafficClassCount;
-
-        return IX_ETH_DB_SUCCESS;
-    }
-
-    return IX_ETH_DB_INVALID_ARG;
-}
diff --git a/drivers/net/npe/IxEthDBFirewall.c b/drivers/net/npe/IxEthDBFirewall.c
deleted file mode 100644
index c0ae562..0000000
--- a/drivers/net/npe/IxEthDBFirewall.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/**
- * @file IxEthDBFirewall.c
- *
- * @brief Implementation of the firewall API
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-#include "IxEthDB_p.h"
-
-/**
- * @brief updates the NPE firewall operating mode and 
- * firewall address table
- *
- * @param portID ID of the port
- * @param epDelta initial entry point for binary searches (NPE optimization)
- * @param address address of the firewall MAC address table
- *
- * This function will send a message to the NPE configuring the
- * firewall mode (white list or black list), invalid source 
- * address filtering and downloading a new MAC address database 
- * to be used for firewall matching.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed 
- * successfully or IX_ETH_DB_FAIL otherwise
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32 epDelta)
-{
-    IxNpeMhMessage message;
-    IX_STATUS result;
-    
-    UINT32 mode        = 0;    
-    PortInfo *portInfo = &ixEthDBPortInfo[portID];
-
-    mode = (portInfo->srcAddressFilterEnabled != false) << 1 | (portInfo->firewallMode == IX_ETH_DB_FIREWALL_WHITE_LIST);
-
-    FILL_SETFIREWALLMODE_MSG(message, 
-        IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), 
-        epDelta, 
-        mode, 
-        IX_OSAL_MMU_VIRT_TO_PHYS(address));
-
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-    
-    return result;
-}
-
-/**
- * @brief configures the firewall white list/black list
- * access mode
- *
- * @param portID ID of the port
- * @param mode firewall filtering mode (IX_ETH_DB_FIREWALL_WHITE_LIST
- * or IX_ETH_DB_FIREWALL_BLACK_LIST)
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-     
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
-    
-    if (mode != IX_ETH_DB_FIREWALL_WHITE_LIST
-        && mode != IX_ETH_DB_FIREWALL_BLACK_LIST)
-    {
-        return IX_ETH_DB_INVALID_ARG;
-    }    
-    
-    ixEthDBPortInfo[portID].firewallMode = mode;
-    
-    return ixEthDBFirewallTableDownload(portID);
-}
-
-/**
- * @brief enables or disables the invalid source MAC address filter
- *
- * @param portID ID of the port
- * @param enable true to enable invalid source MAC address filtering
- * or false to disable it
- *
- * The invalid source MAC address filter will discard, when enabled,
- * frames whose source MAC address is a multicast or the broadcast MAC
- * address.
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed 
- * successfully or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
-
-    ixEthDBPortInfo[portID].srcAddressFilterEnabled = enable;
-    
-    return ixEthDBFirewallTableDownload(portID);
-}
-
-/**
- * @brief adds a firewall record
- *
- * @param portID ID of the port
- * @param macAddr MAC address of the new record
- *
- * This function will add a new firewall record
- * on the specified port, using the specified 
- * MAC address. If the record already exists this
- * function will silently return IX_ETH_DB_SUCCESS,
- * although no duplicate records are added.
- *
- * Note that this function is documented in the main
- * component header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
-{
-    MacDescriptor recordTemplate;
-
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
-    
-    memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr));
-    
-    recordTemplate.type   = IX_ETH_DB_FIREWALL_RECORD;
-    recordTemplate.portID = portID;
-    
-    return ixEthDBAdd(&recordTemplate, NULL);
-}
-
-/**
- * @brief removes a firewall record
- *
- * @param portID ID of the port
- * @param macAddr MAC address of the record to remove
- *
- * This function will attempt to remove a firewall
- * record from the given port, using the specified
- * MAC address.
- *
- * Note that this function is documented in the main
- * component header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully of an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
-{
-    MacDescriptor recordTemplate;
-    
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
-    
-    memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr));
-    
-    recordTemplate.type   = IX_ETH_DB_FIREWALL_RECORD;
-    recordTemplate.portID = portID;
-    
-    return ixEthDBRemove(&recordTemplate, NULL);
-}
-
-/**
- * @brief downloads the firewall address table to an NPE
- *
- * @param portID ID of the port
- *
- * This function will download the firewall address table to
- * an NPE port.
- *
- * Note that this function is documented in the main 
- * component header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or IX_ETH_DB_FAIL otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID)
-{
-    IxEthDBPortMap query;
-    IxEthDBStatus result;
-    
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL);
-    
-    SET_DEPENDENCY_MAP(query, portID);
-
-    ixEthDBUpdateLock();
-    
-    ixEthDBPortInfo[portID].updateMethod.searchTree = ixEthDBQuery(NULL, query, IX_ETH_DB_FIREWALL_RECORD, MAX_FW_SIZE);
-    
-    result = ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_FIREWALL_RECORD);
-
-    ixEthDBUpdateUnlock();
-
-    return result;
-}
diff --git a/drivers/net/npe/IxEthDBHashtable.c b/drivers/net/npe/IxEthDBHashtable.c
deleted file mode 100644
index 9493a5b..0000000
--- a/drivers/net/npe/IxEthDBHashtable.c
+++ /dev/null
@@ -1,618 +0,0 @@
-/**
- * @file ethHash.c
- *
- * @brief Hashtable implementation
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-#include "IxEthDB_p.h"
-#include "IxEthDBLocks_p.h"
-
-/**
- * @addtogroup EthDB
- *
- * @{
- */
-
-/**
- * @brief initializes a hash table object
- *
- * @param hashTable uninitialized hash table structure
- * @param numBuckets number of buckets to use
- * @param entryHashFunction hash function used 
- * to hash entire hash node data block (for adding)
- * @param matchFunctions array of match functions, indexed on type,
- * used to differentiate records with the same hash value
- * @param freeFunction function used to free node data blocks
- *
- * Initializes the given hash table object.
- *
- * @internal
- */
-void ixEthDBInitHash(HashTable *hashTable, 
-                     UINT32 numBuckets, 
-                     HashFunction entryHashFunction, 
-                     MatchFunction *matchFunctions, 
-                     FreeFunction freeFunction)
-{
-    UINT32 bucketIndex;
-    UINT32 hashSize = numBuckets * sizeof(HashNode *);
-
-    /* entry hashing, matching and freeing methods */
-    hashTable->entryHashFunction  = entryHashFunction;
-    hashTable->matchFunctions     = matchFunctions;
-    hashTable->freeFunction       = freeFunction;
-
-    /* buckets */
-    hashTable->numBuckets = numBuckets;
-
-    /* set to 0 all buckets */
-    memset(hashTable->hashBuckets, 0, hashSize);
-
-    /* init bucket locks - note that initially all mutexes are unlocked after MutexInit()*/
-    for (bucketIndex = 0 ; bucketIndex < numBuckets ; bucketIndex++)
-    {
-        ixOsalFastMutexInit(&hashTable->bucketLocks[bucketIndex]);
-    }
-}
-
-/**
- * @brief adds an entry to the hash table
- *
- * @param hashTable hash table to add the entry to
- * @param entry entry to add
- *
- * The entry will be hashed using the entry hashing function and added to the
- * hash table, unless a locking blockage occurs, in which case the caller
- * should retry.
- *
- * @retval IX_ETH_DB_SUCCESS if adding <i>entry</i> has succeeded
- * @retval IX_ETH_DB_NOMEM if there's no memory left in the hash node pool
- * @retval IX_ETH_DB_BUSY if there's a locking failure on the insertion path
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBAddHashEntry(HashTable *hashTable, void *entry)
-{
-    UINT32 hashValue   = hashTable->entryHashFunction(entry);
-    UINT32 bucketIndex = hashValue % hashTable->numBuckets;
-    HashNode *bucket   = hashTable->hashBuckets[bucketIndex];
-    HashNode *newNode;
-
-    LockStack locks;
-
-    INIT_STACK(&locks);
-
-    /* lock bucket */
-    PUSH_LOCK(&locks, &hashTable->bucketLocks[bucketIndex]);
-
-    /* lock insertion element (first in chain), if any */
-    if (bucket != NULL)
-    {
-        PUSH_LOCK(&locks, &bucket->lock);
-    }
-
-    /* get new node */
-    newNode = ixEthDBAllocHashNode();
-
-    if (newNode == NULL)
-    {
-        /* unlock everything */
-        UNROLL_STACK(&locks);
-
-        return IX_ETH_DB_NOMEM;
-    }
-
-    /* init lock - note that mutexes are unlocked after MutexInit */
-    ixOsalFastMutexInit(&newNode->lock);
-
-    /* populate new link */
-    newNode->data = entry;
-
-    /* add to bucket */
-    newNode->next                       = bucket;
-    hashTable->hashBuckets[bucketIndex] = newNode;
-
-    /* unlock bucket and insertion point */
-    UNROLL_STACK(&locks);
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief removes an entry from the hashtable
- *
- * @param hashTable hash table to remove entry from
- * @param keyType type of record key used for matching
- * @param reference reference key used to identify the entry
- *
- * The reference key will be hashed using the key hashing function,
- * the entry is searched using the hashed value and then examined
- * against the reference entry using the match function. A positive
- * match will trigger the deletion of the entry.
- * Locking failures are reported and the caller should retry.
- *
- * @retval IX_ETH_DB_SUCCESS if the removal was successful
- * @retval IX_ETH_DB_NO_SUCH_ADDR if the entry was not found
- * @retval IX_ETH_DB_BUSY if a locking failure occured during the process
- *
- * @internal
- */
-IxEthDBStatus ixEthDBRemoveHashEntry(HashTable *hashTable, int keyType, void *reference)
-{
-    UINT32 hashValue       = hashTable->entryHashFunction(reference);
-    UINT32 bucketIndex     = hashValue % hashTable->numBuckets;
-    HashNode *node         = hashTable->hashBuckets[bucketIndex];
-    HashNode *previousNode = NULL;
-    
-    LockStack locks;
-
-    INIT_STACK(&locks);
-
-    while (node != NULL)
-    {
-        /* try to lock node */
-        PUSH_LOCK(&locks, &node->lock);
-
-        if (hashTable->matchFunctions[keyType](reference, node->data))
-        {
-            /* found entry */
-            if (node->next != NULL)
-            {
-                PUSH_LOCK(&locks, &node->next->lock);
-            }
-
-            if (previousNode == NULL)
-            {
-                /* node is head of chain */
-                PUSH_LOCK(&locks, &hashTable->bucketLocks[bucketIndex]);
-
-                hashTable->hashBuckets[bucketIndex] = node->next;
-
-                POP_LOCK(&locks);
-            }
-            else
-            {
-                /* relink */
-                previousNode->next = node->next;
-            }
-
-            UNROLL_STACK(&locks);
-
-            /* free node */
-            hashTable->freeFunction(node->data);
-            ixEthDBFreeHashNode(node);
-
-            return IX_ETH_DB_SUCCESS;
-        }
-        else
-        {
-            if (previousNode != NULL)
-            {
-                /* unlock previous node */
-                SHIFT_STACK(&locks);
-            }
-
-            /* advance to next element in chain */
-            previousNode = node;
-            node         = node->next;
-        }
-    }
-
-    UNROLL_STACK(&locks);
-
-    /* not found */
-    return IX_ETH_DB_NO_SUCH_ADDR;
-}
-
-/**
- * @brief retrieves an entry from the hash table
- *
- * @param hashTable hash table to perform the search into
- * @param reference search key (a MAC address)
- * @param keyType type of record key used for matching
- * @param searchResult pointer where a reference to the located hash node 
- * is placed
- *
- * Searches the entry with the same key as <i>reference</i> and places the
- * pointer to the resulting node in <i>searchResult</i>.
- * An implicit write access lock is granted after a search, which gives the 
- * caller the opportunity to modify the entry.
- * Access should be released as soon as possible using @ref ixEthDBReleaseHashNode().
- *
- * @see ixEthDBReleaseHashNode()
- *
- * @retval IX_ETH_DB_SUCCESS if the search was completed successfully
- * @retval IX_ETH_DB_NO_SUCH_ADDRESS if no entry with the given key was found
- * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case
- * the caller should retry
- *
- * @warning unless the return value is <b>IX_ETH_DB_SUCCESS</b> the searchResult
- * location is NOT modified and therefore using a NULL comparison test when the
- * value was not properly initialized would be an error
- *
- * @internal
- */
-IxEthDBStatus ixEthDBSearchHashEntry(HashTable *hashTable, int keyType, void *reference, HashNode **searchResult)
-{
-    UINT32 hashValue;
-    HashNode *node;
-
-    hashValue = hashTable->entryHashFunction(reference);
-    node      = hashTable->hashBuckets[hashValue % hashTable->numBuckets];
-
-    while (node != NULL)
-    {
-        TRY_LOCK(&node->lock);
-
-        if (hashTable->matchFunctions[keyType](reference, node->data))
-        {
-            *searchResult = node;
-
-            return IX_ETH_DB_SUCCESS;
-        }
-        else
-        {
-            UNLOCK(&node->lock);
-
-            node = node->next;
-        }
-    }
-
-    /* not found */
-    return IX_ETH_DB_NO_SUCH_ADDR;
-}
-
-/**
- * @brief reports the existence of an entry in the hash table
- *
- * @param hashTable hash table to perform the search into
- * @param reference search key (a MAC address)
- * @param keyType type of record key used for matching
- *
- * Searches the entry with the same key as <i>reference</i>.
- * No implicit write access lock is granted after a search, hence the 
- * caller cannot access or modify the entry. The result is only temporary.
- *
- * @see ixEthDBReleaseHashNode()
- *
- * @retval IX_ETH_DB_SUCCESS if the search was completed successfully
- * @retval IX_ETH_DB_NO_SUCH_ADDRESS if no entry with the given key was found
- * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case
- * the caller should retry
- *
- * @internal
- */
-IxEthDBStatus ixEthDBPeekHashEntry(HashTable *hashTable, int keyType, void *reference)
-{
-    UINT32 hashValue;
-    HashNode *node;
-
-    hashValue = hashTable->entryHashFunction(reference);
-    node      = hashTable->hashBuckets[hashValue % hashTable->numBuckets];
-
-    while (node != NULL)
-    {
-        TRY_LOCK(&node->lock);
-
-        if (hashTable->matchFunctions[keyType](reference, node->data))
-        {
-            UNLOCK(&node->lock);
-
-            return IX_ETH_DB_SUCCESS;
-        }
-        else
-        {
-            UNLOCK(&node->lock);
-
-            node = node->next;
-        }
-    }
-
-    /* not found */
-    return IX_ETH_DB_NO_SUCH_ADDR;
-}
-
-/**
- * @brief releases the write access lock
- *
- * @pre the node should have been obtained via @ref ixEthDBSearchHashEntry()
- *
- * @see ixEthDBSearchHashEntry()
- *
- * @internal
- */
-void ixEthDBReleaseHashNode(HashNode *node)
-{
-    UNLOCK(&node->lock);
-}
-
-/**
- * @brief initializes a hash iterator
- *
- * @param hashTable hash table to be iterated
- * @param iterator iterator object
- *
- * If the initialization is successful the iterator will point to the
- * first hash table record (if any).
- * Testing if the iterator has not passed the end of the table should be
- * done using the IS_ITERATOR_VALID(iteratorPtr) macro.
- * An implicit write access lock is granted on the entry pointed by the iterator.
- * The access is automatically revoked when the iterator is incremented.
- * If the caller decides to terminate the iteration before the end of the table is
- * passed then the manual access release method, @ref ixEthDBReleaseHashIterator,
- * must be called.
- *
- * @see ixEthDBReleaseHashIterator()
- *
- * @retval IX_ETH_DB_SUCCESS if initialization was successful and the iterator points
- * to the first valid table node
- * @retval IX_ETH_DB_FAIL if the table is empty
- * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case the caller
- * should retry
- *
- * @warning do not use ixEthDBReleaseHashNode() on entries pointed by the iterator, as this
- * might place the database in a permanent invalid lock state
- *
- * @internal
- */
-IxEthDBStatus ixEthDBInitHashIterator(HashTable *hashTable, HashIterator *iterator)
-{
-    iterator->bucketIndex  = 0;
-    iterator->node         = NULL;
-    iterator->previousNode = NULL;
-
-    return ixEthDBIncrementHashIterator(hashTable, iterator);
-}
-
-/**
- * @brief releases the write access locks of the iterator nodes
- *
- * @warning use of this function is required only when the caller terminates an iteration
- * before reaching the end of the table
- *
- * @see ixEthDBInitHashIterator()
- * @see ixEthDBIncrementHashIterator()
- *
- * @param iterator iterator whose node(s) should be unlocked
- *
- * @internal
- */
-void ixEthDBReleaseHashIterator(HashIterator *iterator)
-{
-    if (iterator->previousNode != NULL)
-    {
-        UNLOCK(&iterator->previousNode->lock);
-    }
-
-    if (iterator->node != NULL)
-    {
-        UNLOCK(&iterator->node->lock);
-    }
-}
-
-/**
- * @brief incremenents an iterator so that it points to the next valid entry of the table
- * (if any)
- *
- * @param hashTable hash table to iterate
- * @param iterator iterator object
- *
- * @pre the iterator object must be initialized using @ref ixEthDBInitHashIterator()
- *
- * If the increment operation is successful the iterator will point to the
- * next hash table record (if any).
- * Testing if the iterator has not passed the end of the table should be
- * done using the IS_ITERATOR_VALID(iteratorPtr) macro.
- * An implicit write access lock is granted on the entry pointed by the iterator.
- * The access is automatically revoked when the iterator is re-incremented.
- * If the caller decides to terminate the iteration before the end of the table is
- * passed then the manual access release method, @ref ixEthDBReleaseHashIterator,
- * must be called.
- * Is is guaranteed that no other thread can remove or change the iterated entry until
- * the iterator is incremented successfully.
- *
- * @see ixEthDBReleaseHashIterator()
- *
- * @retval IX_ETH_DB_SUCCESS if the operation was successful and the iterator points
- * to the next valid table node
- * @retval IX_ETH_DB_FAIL if the iterator has passed the end of the table
- * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case the caller
- * should retry
- *
- * @warning do not use ixEthDBReleaseHashNode() on entries pointed by the iterator, as this
- * might place the database in a permanent invalid lock state
- *
- * @internal
- */
-IxEthDBStatus ixEthDBIncrementHashIterator(HashTable *hashTable, HashIterator *iterator)
-{
-    /* unless iterator is just initialized... */
-    if (iterator->node != NULL)
-    {
-        /* try next in chain */
-        if (iterator->node->next != NULL)
-        {
-            TRY_LOCK(&iterator->node->next->lock);
-
-            if (iterator->previousNode != NULL)
-            {
-                UNLOCK(&iterator->previousNode->lock);
-            }
-
-            iterator->previousNode = iterator->node;
-            iterator->node         = iterator->node->next;
-
-            return IX_ETH_DB_SUCCESS;
-        }
-        else
-        {
-            /* last in chain, prepare for next bucket */
-            iterator->bucketIndex++;
-        }
-    }
-
-   /* try next used bucket */
-    for (; iterator->bucketIndex < hashTable->numBuckets ; iterator->bucketIndex++)
-    {
-        HashNode **nodePtr = &(hashTable->hashBuckets[iterator->bucketIndex]);
-        HashNode *node = *nodePtr;
-#if (CPU!=SIMSPARCSOLARIS) && !defined (__wince)
-        if (((iterator->bucketIndex & IX_ETHDB_BUCKET_INDEX_MASK) == 0) &&
-            (iterator->bucketIndex < (hashTable->numBuckets - IX_ETHDB_BUCKETPTR_AHEAD)))
-        {
-            /* preload next cache line (2 cache line ahead) */
-            nodePtr += IX_ETHDB_BUCKETPTR_AHEAD;
-            __asm__ ("pld [%0];\n": : "r" (nodePtr));
-        }
-#endif
-        if (node != NULL)
-        {
-            TRY_LOCK(&node->lock);
-
-            /* unlock last one or two nodes in the previous chain */
-            if (iterator->node != NULL)
-            {
-                UNLOCK(&iterator->node->lock);
-
-                if (iterator->previousNode != NULL)
-                {
-                    UNLOCK(&iterator->previousNode->lock);
-                }
-            }
-            
-            /* redirect iterator */
-            iterator->previousNode = NULL;
-            iterator->node         = node;
-
-            return IX_ETH_DB_SUCCESS;
-        }
-    }
-
-    /* could not advance iterator */
-    if (iterator->node != NULL)
-    {
-        UNLOCK(&iterator->node->lock);
-
-        if (iterator->previousNode != NULL)
-        {
-            UNLOCK(&iterator->previousNode->lock);
-        }
-
-        iterator->node = NULL;
-    }
-
-    return IX_ETH_DB_END;
-}
-
-/**
- * @brief removes an entry pointed by an iterator
- *
- * @param hashTable iterated hash table
- * @param iterator iterator object
- *
- * Removes the entry currently pointed by the iterator and repositions the iterator
- * on the next valid entry (if any). Handles locking issues automatically and
- * implicitely grants write access lock to the new pointed entry.
- * Failures due to concurrent threads having write access locks in the same region
- * preserve the state of the database and the iterator object, leaving the caller
- * free to retry without loss of access. It is guaranteed that only the thread owning
- * the iterator can remove the object pointed by the iterator.
- *
- * @retval IX_ETH_DB_SUCCESS if removal has succeeded
- * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case the caller
- * should retry
- *
- * @internal
- */
-IxEthDBStatus ixEthDBRemoveEntryAtHashIterator(HashTable *hashTable, HashIterator *iterator)
-{
-    HashIterator nextIteratorPos;
-    LockStack locks;
-
-    INIT_STACK(&locks);
-
-    /* set initial bucket index for next position */
-    nextIteratorPos.bucketIndex = iterator->bucketIndex;
-
-    /* compute iterator position before removing anything and lock ahead */
-    if (iterator->node->next != NULL)
-    {
-        PUSH_LOCK(&locks, &iterator->node->next->lock);
-
-        /* reposition on the next node in the chain */
-        nextIteratorPos.node         = iterator->node->next;
-        nextIteratorPos.previousNode = iterator->previousNode;
-    }
-    else
-    {
-        /* try next chain - don't know yet if we'll find anything */
-        nextIteratorPos.node = NULL;
-
-        /* if we find something it's a chain head */
-        nextIteratorPos.previousNode = NULL;
-
-        /* browse up in the buckets to find a non-null chain */
-        while (++nextIteratorPos.bucketIndex < hashTable->numBuckets)
-        {
-            nextIteratorPos.node = hashTable->hashBuckets[nextIteratorPos.bucketIndex];
-
-            if (nextIteratorPos.node != NULL)
-            {
-                /* found a non-empty chain, try to lock head */
-                PUSH_LOCK(&locks, &nextIteratorPos.node->lock);
-
-                break;
-            }
-        }
-    }
-
-    /* restore links over the to-be-deleted item */
-    if (iterator->previousNode == NULL)
-    {
-        /* first in chain, lock bucket */
-        PUSH_LOCK(&locks, &hashTable->bucketLocks[iterator->bucketIndex]);
-
-        hashTable->hashBuckets[iterator->bucketIndex] = iterator->node->next;
-
-        POP_LOCK(&locks);
-    }
-    else
-    {
-        /* relink */
-        iterator->previousNode->next = iterator->node->next;
-
-        /* unlock last remaining node in current chain when moving between chains */
-        if (iterator->node->next == NULL)
-        {
-            UNLOCK(&iterator->previousNode->lock);
-        }
-    }
-
-    /* delete entry */
-    hashTable->freeFunction(iterator->node->data);
-    ixEthDBFreeHashNode(iterator->node);
-
-    /* reposition iterator */
-    *iterator = nextIteratorPos;
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @}
- */
diff --git a/drivers/net/npe/IxEthDBLearning.c b/drivers/net/npe/IxEthDBLearning.c
deleted file mode 100644
index 1080d11..0000000
--- a/drivers/net/npe/IxEthDBLearning.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/**
- * @file IxEthDBLearning.c
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxEthDB_p.h"
-
-/**
- * @brief hashes the mac address in a mac descriptor with a XOR function
- *
- * @param entry pointer to a mac descriptor to be hashed
- * 
- * This function only extracts the mac address and employs ixEthDBKeyXORHash()
- * to do the actual hashing.
- * Used only to add a whole entry to a hash table, as opposed to searching which
- * takes only a key and uses the key hashing directly.
- *
- * @see ixEthDBKeyXORHash()
- *
- * @return the hash value
- *
- * @internal
- */
-UINT32 ixEthDBEntryXORHash(void *entry)
-{
-    MacDescriptor *descriptor = (MacDescriptor *) entry;
-
-    return ixEthDBKeyXORHash(descriptor->macAddress);
-}
-
-/**
- * @brief hashes a mac address
- *
- * @param key pointer to a 6 byte structure (typically an IxEthDBMacAddr pointer)
- * to be hashed
- *
- * Given a 6 bytes MAC address, the hash used is:
- *
- * hash(MAC[0:5]) = MAC[0:1] ^ MAC[2:3] ^ MAC[4:5]
- *
- * Used by the hash table to search and remove entries based
- * solely on their keys (mac addresses).
- *
- * @return the hash value
- *
- * @internal
- */
-UINT32 ixEthDBKeyXORHash(void *key)
-{
-    UINT32 hashValue;
-    UINT8 *value = (UINT8 *) key;
-    
-    hashValue  = (value[5] << 8) | value[4];
-    hashValue ^= (value[3] << 8) | value[2];
-    hashValue ^= (value[1] << 8) | value[0];
-
-    return hashValue;
-}
-
-/**
- * @brief mac descriptor match function
- *
- * @param reference mac address (typically an IxEthDBMacAddr pointer) structure
- * @param entry pointer to a mac descriptor whose key (mac address) is to be 
- * matched against the reference key
- *
- * Used by the hash table to retrieve entries. Hashing entries can produce
- * collisions, i.e. descriptors with different mac addresses and the same
- * hash value, where this function is used to differentiate entries.
- *
- * @retval true if the entry matches the reference key (equal addresses)
- * @retval false if the entry does not match the reference key
- *
- * @internal
- */
-BOOL ixEthDBAddressMatch(void *reference, void *entry)
-{
-    return (ixEthDBAddressCompare(reference, ((MacDescriptor *) entry)->macAddress) == 0);
-}
-
-/**
- * @brief compares two mac addresses
- *
- * @param mac1 first mac address to compare
- * @param mac2 second mac address to compare
- * 
- * This comparison works in a similar way to strcmp, producing similar results.
- * Used to insert values keyed on mac addresses into binary search trees.
- *
- * @retval -1 if mac1 < mac2
- * @retval 0 if ma1 == mac2
- * @retval 1 if mac1 > mac2
- */
-UINT32 ixEthDBAddressCompare(UINT8 *mac1, UINT8 *mac2)
-{
-    UINT32 local_index;
-
-    for (local_index = 0 ; local_index < IX_IEEE803_MAC_ADDRESS_SIZE ; local_index++)
-    {
-        if (mac1[local_index] > mac2[local_index])
-        {
-            return 1;
-        }
-        else if (mac1[local_index] < mac2[local_index])
-        {
-            return -1;
-        }
-    }
-
-    return 0;
-}
-
diff --git a/drivers/net/npe/IxEthDBMem.c b/drivers/net/npe/IxEthDBMem.c
deleted file mode 100644
index 78fce4b..0000000
--- a/drivers/net/npe/IxEthDBMem.c
+++ /dev/null
@@ -1,625 +0,0 @@
-/**
- * @file IxEthDBDBMem.c
- *
- * @brief Memory handling routines for the MAC address database
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-#include "IxEthDB_p.h"
-
-IX_ETH_DB_PRIVATE HashNode *nodePool     = NULL;
-IX_ETH_DB_PRIVATE MacDescriptor *macPool = NULL;
-IX_ETH_DB_PRIVATE MacTreeNode *treePool  = NULL;
-
-IX_ETH_DB_PRIVATE HashNode nodePoolArea[NODE_POOL_SIZE];
-IX_ETH_DB_PRIVATE MacDescriptor macPoolArea[MAC_POOL_SIZE];
-IX_ETH_DB_PRIVATE MacTreeNode treePoolArea[TREE_POOL_SIZE];
-
-IX_ETH_DB_PRIVATE IxOsalMutex nodePoolLock;
-IX_ETH_DB_PRIVATE IxOsalMutex macPoolLock;
-IX_ETH_DB_PRIVATE IxOsalMutex treePoolLock;
-
-#define LOCK_NODE_POOL   { ixOsalMutexLock(&nodePoolLock, IX_OSAL_WAIT_FOREVER); }
-#define UNLOCK_NODE_POOL { ixOsalMutexUnlock(&nodePoolLock); }
-
-#define LOCK_MAC_POOL    { ixOsalMutexLock(&macPoolLock, IX_OSAL_WAIT_FOREVER); }
-#define UNLOCK_MAC_POOL  { ixOsalMutexUnlock(&macPoolLock); }
-
-#define LOCK_TREE_POOL   { ixOsalMutexLock(&treePoolLock, IX_OSAL_WAIT_FOREVER); }
-#define UNLOCK_TREE_POOL { ixOsalMutexUnlock(&treePoolLock); }
-
-/* private function prototypes */
-IX_ETH_DB_PRIVATE MacDescriptor* ixEthDBPoolAllocMacDescriptor(void);
-IX_ETH_DB_PRIVATE void ixEthDBPoolFreeMacDescriptor(MacDescriptor *macDescriptor);
-
-/**
- * @addtogroup EthMemoryManagement
- *
- * @{
- */
-
-/**
- * @brief initializes the memory pools used by the ethernet database component
- *
- * Initializes the hash table node, mac descriptor and mac tree node pools.
- * Called at initialization time by @ref ixEthDBInit().
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBInitMemoryPools(void)
-{
-    int local_index;
-
-    /* HashNode pool */
-    ixOsalMutexInit(&nodePoolLock);
-
-    for (local_index = 0 ; local_index < NODE_POOL_SIZE ; local_index++)
-    {
-        HashNode *freeNode = &nodePoolArea[local_index];
-
-        freeNode->nextFree = nodePool;
-        nodePool           = freeNode;
-    }
-
-    /* MacDescriptor pool */
-    ixOsalMutexInit(&macPoolLock);
-
-    for (local_index = 0 ; local_index < MAC_POOL_SIZE ; local_index++)
-    {
-        MacDescriptor *freeDescriptor = &macPoolArea[local_index];
-
-        freeDescriptor->nextFree = macPool;
-        macPool                  = freeDescriptor;
-    }
-
-    /* MacTreeNode pool */
-    ixOsalMutexInit(&treePoolLock);
-
-    for (local_index = 0 ; local_index < TREE_POOL_SIZE ; local_index++)
-    {
-        MacTreeNode *freeNode = &treePoolArea[local_index];
-
-        freeNode->nextFree = treePool;
-        treePool           = freeNode;
-    }
-}
-
-/**
- * @brief allocates a hash node from the pool
- *
- * Allocates a hash node and resets its value.
- *
- * @return the allocated hash node or NULL if the pool is empty
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-HashNode* ixEthDBAllocHashNode(void)
-{
-    HashNode *allocatedNode = NULL;
-
-    if (nodePool != NULL)
-    {
-        LOCK_NODE_POOL;
-
-        allocatedNode = nodePool;
-        nodePool      = nodePool->nextFree;
-
-        UNLOCK_NODE_POOL;
-
-        memset(allocatedNode, 0, sizeof(HashNode));
-    }
-
-    return allocatedNode;
-}
-
-/**
- * @brief frees a hash node into the pool
- *
- * @param hashNode node to be freed
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBFreeHashNode(HashNode *hashNode)
-{
-    if (hashNode != NULL)
-    {
-        LOCK_NODE_POOL;
-
-        hashNode->nextFree = nodePool;
-        nodePool           = hashNode;
-
-        UNLOCK_NODE_POOL;
-    }
-}
-
-/**
- * @brief allocates a mac descriptor from the pool
- *
- * Allocates a mac descriptor and resets its value.
- * This function is not used directly, instead @ref ixEthDBAllocMacDescriptor()
- * is used, which keeps track of the pointer reference count.
- *
- * @see ixEthDBAllocMacDescriptor()
- * 
- * @warning this function is not used directly by any other function
- * apart from ixEthDBAllocMacDescriptor()
- *
- * @return the allocated mac descriptor or NULL if the pool is empty
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-MacDescriptor* ixEthDBPoolAllocMacDescriptor(void)
-{
-    MacDescriptor *allocatedDescriptor = NULL;
-
-    if (macPool != NULL)
-    {
-        LOCK_MAC_POOL;
-
-        allocatedDescriptor = macPool;
-        macPool             = macPool->nextFree;
-
-        UNLOCK_MAC_POOL;
-
-        memset(allocatedDescriptor, 0, sizeof(MacDescriptor));
-    }
-
-    return allocatedDescriptor;
-}
-
-/**
- * @brief allocates and initializes a mac descriptor smart pointer
- *
- * Uses @ref ixEthDBPoolAllocMacDescriptor() to allocate a mac descriptor
- * from the pool and initializes its reference count.
- *
- * @see ixEthDBPoolAllocMacDescriptor()
- *
- * @return the allocated mac descriptor or NULL if the pool is empty
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-MacDescriptor* ixEthDBAllocMacDescriptor(void)
-{
-    MacDescriptor *allocatedDescriptor = ixEthDBPoolAllocMacDescriptor();
-
-    if (allocatedDescriptor != NULL)
-    {
-        LOCK_MAC_POOL;
-
-        allocatedDescriptor->refCount++;
-
-        UNLOCK_MAC_POOL;
-    }
-
-    return allocatedDescriptor;
-}
-
-/**
- * @brief frees a mac descriptor back into the pool
- *
- * @param macDescriptor mac descriptor to be freed
- *
- * @warning this function is not to be called by anyone but
- * ixEthDBFreeMacDescriptor()
- *
- * @see ixEthDBFreeMacDescriptor()
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBPoolFreeMacDescriptor(MacDescriptor *macDescriptor)
-{
-    LOCK_MAC_POOL;
-
-    macDescriptor->nextFree = macPool;
-    macPool                 = macDescriptor;
-
-    UNLOCK_MAC_POOL;
-}
-
-/**
- * @brief frees or reduces the usage count of a mac descriptor smart pointer
- *
- * If the reference count reaches 0 (structure is no longer used anywhere)
- * then the descriptor is freed back into the pool using ixEthDBPoolFreeMacDescriptor().
- *
- * @see ixEthDBPoolFreeMacDescriptor()
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBFreeMacDescriptor(MacDescriptor *macDescriptor)
-{
-    if (macDescriptor != NULL)
-    {
-        LOCK_MAC_POOL;
-
-        if (macDescriptor->refCount > 0)
-        {
-            macDescriptor->refCount--;
-
-            if (macDescriptor->refCount == 0)
-            {
-                UNLOCK_MAC_POOL;
-
-                ixEthDBPoolFreeMacDescriptor(macDescriptor);
-            }
-            else
-            {
-                UNLOCK_MAC_POOL;
-            }
-        }
-        else
-        {
-            UNLOCK_MAC_POOL;
-        }
-    }
-}
-
-/**
- * @brief clones a mac descriptor smart pointer
- *
- * @param macDescriptor mac descriptor to clone
- *
- * Increments the usage count of the smart pointer
- *
- * @returns the cloned smart pointer
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-MacDescriptor* ixEthDBCloneMacDescriptor(MacDescriptor *macDescriptor)
-{
-    LOCK_MAC_POOL;
-
-    if (macDescriptor->refCount == 0)
-    {
-        UNLOCK_MAC_POOL;
-
-        return NULL;
-    }
-
-    macDescriptor->refCount++;
-
-    UNLOCK_MAC_POOL;
-
-    return macDescriptor;
-}
-
-/**
- * @brief allocates a mac tree node from the pool
- *
- * Allocates and initializes a mac tree node from the pool.
- *
- * @return the allocated mac tree node or NULL if the pool is empty
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-MacTreeNode* ixEthDBAllocMacTreeNode(void)
-{
-    MacTreeNode *allocatedNode = NULL;
-
-    if (treePool != NULL)
-    {
-        LOCK_TREE_POOL;
-
-        allocatedNode = treePool;
-        treePool      = treePool->nextFree;
-
-        UNLOCK_TREE_POOL;
-
-        memset(allocatedNode, 0, sizeof(MacTreeNode));
-    }
-
-    return allocatedNode;
-}
-
-/**
- * @brief frees a mac tree node back into the pool
- *
- * @param macNode mac tree node to be freed
- *
- * @warning not to be used except from ixEthDBFreeMacTreeNode().
- *
- * @see ixEthDBFreeMacTreeNode()
- *
- * @internal
- */
-void ixEthDBPoolFreeMacTreeNode(MacTreeNode *macNode)
-{
-    if (macNode != NULL)
-    {
-        LOCK_TREE_POOL;
-
-        macNode->nextFree = treePool;
-        treePool          = macNode;
-
-        UNLOCK_TREE_POOL;
-    }
-}
-
-/**
- * @brief frees or reduces the usage count of a mac tree node smart pointer
- *
- * @param macNode mac tree node to free
- *
- * Reduces the usage count of the given mac node. If the usage count
- * reaches 0 the node is freed back into the pool using ixEthDBPoolFreeMacTreeNode()
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBFreeMacTreeNode(MacTreeNode *macNode)
-{
-    if (macNode->descriptor != NULL)
-    {
-        ixEthDBFreeMacDescriptor(macNode->descriptor);
-    }
-
-    if (macNode->left != NULL)
-    {
-        ixEthDBFreeMacTreeNode(macNode->left);
-    }
-
-    if (macNode->right != NULL)
-    {
-        ixEthDBFreeMacTreeNode(macNode->right);
-    }
-
-    ixEthDBPoolFreeMacTreeNode(macNode);
-}
-
-/**
- * @brief clones a mac tree node
- *
- * @param macNode mac tree node to be cloned
- *
- * Increments the usage count of the node, <i>its associated descriptor 
- * and <b>recursively</b> of all its child nodes</i>.
- *
- * @warning this function is recursive and clones whole trees/subtrees, use only for
- * root nodes
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-MacTreeNode* ixEthDBCloneMacTreeNode(MacTreeNode *macNode)
-{
-    if (macNode != NULL)
-    {
-        MacTreeNode *clonedMacNode = ixEthDBAllocMacTreeNode();
-
-        if (clonedMacNode != NULL)
-        {
-            if (macNode->right != NULL)
-            {
-                clonedMacNode->right = ixEthDBCloneMacTreeNode(macNode->right);
-            }
-
-            if (macNode->left != NULL)
-            {
-                clonedMacNode->left = ixEthDBCloneMacTreeNode(macNode->left);
-            }
-
-            if (macNode->descriptor != NULL)
-            {
-                clonedMacNode->descriptor = ixEthDBCloneMacDescriptor(macNode->descriptor);
-            }
-        }
-
-        return clonedMacNode;
-    }
-    else
-    {
-        return NULL;
-    }
-}
-
-#ifndef NDEBUG
-/* Debug statistical functions for memory usage */
-
-extern HashTable dbHashtable;
-int ixEthDBNumHashElements(void);
-
-int ixEthDBNumHashElements(void)
-{   
-    UINT32 bucketIndex;
-    int numElements = 0;
-    HashTable *hashTable = &dbHashtable;
-
-    for (bucketIndex = 0 ; bucketIndex < hashTable->numBuckets ; bucketIndex++)
-    {
-        if (hashTable->hashBuckets[bucketIndex] != NULL)
-        {
-            HashNode *node = hashTable->hashBuckets[bucketIndex];
-
-            while (node != NULL)
-            {
-                numElements++;
-
-                node = node->next;
-            }
-        }
-    }
-
-    return numElements;
-}
-
-UINT32 ixEthDBSearchTreeUsageGet(MacTreeNode *tree)
-{
-    if (tree == NULL)
-    {
-        return 0;
-    }
-    else
-    {
-        return 1 /* this node */ + ixEthDBSearchTreeUsageGet(tree->left) + ixEthDBSearchTreeUsageGet(tree->right);
-    }
-}
-
-int ixEthDBShowMemoryStatus(void)
-{
-    MacDescriptor *mac;
-    MacTreeNode *tree;
-    HashNode *node;
-
-    int macCounter  = 0;
-    int treeCounter = 0;
-    int nodeCounter = 0;
-
-    int totalTreeUsage            = 0;
-    int totalDescriptorUsage      = 0;
-    int totalCloneDescriptorUsage = 0;
-    int totalNodeUsage            = 0;
-
-    UINT32 portIndex;
-
-    LOCK_NODE_POOL;
-    LOCK_MAC_POOL;
-    LOCK_TREE_POOL;
-
-    mac  = macPool;
-    tree = treePool;
-    node = nodePool;
-
-    while (mac != NULL)
-    {
-        macCounter++;
-
-        mac = mac->nextFree;
-
-        if (macCounter > MAC_POOL_SIZE)
-        {
-            break;
-        }
-    }
-
-    while (tree != NULL)
-    {
-        treeCounter++;
-
-        tree = tree->nextFree;
-
-        if (treeCounter > TREE_POOL_SIZE)
-        {
-            break;
-        }
-    }
-
-    while (node != NULL)
-    {
-        nodeCounter++;
-
-        node = node->nextFree;
-
-        if (nodeCounter > NODE_POOL_SIZE)
-        {
-            break;
-        }
-    }
-
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        int treeUsage = ixEthDBSearchTreeUsageGet(ixEthDBPortInfo[portIndex].updateMethod.searchTree);
-
-        totalTreeUsage            += treeUsage;
-        totalCloneDescriptorUsage += treeUsage; /* each tree node contains a descriptor */
-    }
-
-    totalNodeUsage        = ixEthDBNumHashElements();
-    totalDescriptorUsage += totalNodeUsage; /* each hash table entry contains a descriptor */
-
-    UNLOCK_NODE_POOL;
-    UNLOCK_MAC_POOL;
-    UNLOCK_TREE_POOL;
-
-    printf("Ethernet database memory usage stats:\n\n");
-
-    if (macCounter <= MAC_POOL_SIZE)
-    {
-        printf("\tMAC descriptor pool  : %d free out of %d entries (%d%%)\n", macCounter, MAC_POOL_SIZE, macCounter * 100 / MAC_POOL_SIZE);
-    }
-    else
-    {
-        printf("\tMAC descriptor pool  : invalid state (ring within the pool), normally %d entries\n", MAC_POOL_SIZE);
-    }
-
-    if (treeCounter <= TREE_POOL_SIZE)
-    {
-	printf("\tTree node pool       : %d free out of %d entries (%d%%)\n", treeCounter, TREE_POOL_SIZE, treeCounter * 100 / TREE_POOL_SIZE);
-    }
-    else
-    {
-        printf("\tTREE descriptor pool  : invalid state (ring within the pool), normally %d entries\n", TREE_POOL_SIZE);
-    }
-
-    if (nodeCounter <= NODE_POOL_SIZE)
-    {
-	printf("\tHash node pool       : %d free out of %d entries (%d%%)\n", nodeCounter, NODE_POOL_SIZE, nodeCounter * 100 / NODE_POOL_SIZE);
-    }
-    else
-    {
-        printf("\tNODE descriptor pool  : invalid state (ring within the pool), normally %d entries\n", NODE_POOL_SIZE);
-    }
-
-    printf("\n");
-    printf("\tMAC descriptor usage : %d entries, %d cloned\n", totalDescriptorUsage, totalCloneDescriptorUsage);
-    printf("\tTree node usage      : %d entries\n", totalTreeUsage);
-    printf("\tHash node usage      : %d entries\n", totalNodeUsage);
-    printf("\n");
-
-    /* search for duplicate nodes in the mac pool */
-    {
-        MacDescriptor *reference = macPool;
-
-        while (reference != NULL)
-        {
-            MacDescriptor *comparison = reference->nextFree;
-
-            while (comparison != NULL)
-            {
-                if (reference == comparison)
-                {
-                    printf("Warning: reached a duplicate (%p), invalid MAC pool state\n", reference);
-
-                    return 1;
-                }
-
-                comparison = comparison->nextFree;
-            }
-
-            reference = reference->nextFree;
-        }
-    }
-
-    printf("No duplicates found in the MAC pool (sanity check ok)\n");
-
-    return 0;
-}
-
-#endif /* NDEBUG */
-
-/**
- * @} EthMemoryManagement
- */
diff --git a/drivers/net/npe/IxEthDBNPEAdaptor.c b/drivers/net/npe/IxEthDBNPEAdaptor.c
deleted file mode 100644
index 30e1f61..0000000
--- a/drivers/net/npe/IxEthDBNPEAdaptor.c
+++ /dev/null
@@ -1,695 +0,0 @@
-/**
- * @file IxEthDBDBNPEAdaptor.c
- *
- * @brief Routines that read and write learning/search trees in NPE-specific format
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxEthDB_p.h"
-#include "IxEthDBLog_p.h"
-
-/* forward prototype declarations */
-IX_ETH_DB_PUBLIC void ixEthDBELTShow(IxEthDBPortId portID);
-IX_ETH_DB_PUBLIC void ixEthDBShowNpeMsgHistory(void);
-
-/* data */
-UINT8* ixEthDBNPEUpdateArea[IX_ETH_DB_NUMBER_OF_PORTS];
-UINT32 dumpEltSize;
-
-/* private data */
-IX_ETH_DB_PRIVATE IxEthDBNoteWriteFn ixEthDBNPENodeWrite[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1];
-
-#define IX_ETH_DB_MAX_DELTA_ZONES (6) /* at most 6 EP Delta zones, according to NPE FS */
-IX_ETH_DB_PRIVATE UINT32 ixEthDBEPDeltaOffset[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1][IX_ETH_DB_MAX_DELTA_ZONES]; 
-IX_ETH_DB_PRIVATE UINT32 ixEthDBEPDelta[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1][IX_ETH_DB_MAX_DELTA_ZONES];
-
-/**
- * @brief allocates non-cached or contiguous NPE tree update areas for all the ports
- *
- * This function is called only once at initialization time from
- * @ref ixEthDBInit().
- *
- * @warning do not call manually
- *
- * @see ixEthDBInit()
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBNPEUpdateAreasInit(void)
-{
-    UINT32 portIndex;
-    PortUpdateMethod *update;
-
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        update = &ixEthDBPortInfo[portIndex].updateMethod;
-
-        if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE)
-        {
-            update->npeUpdateZone   = IX_OSAL_CACHE_DMA_MALLOC(FULL_ELT_BYTE_SIZE);
-            update->npeGwUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_GW_BYTE_SIZE);
-            update->vlanUpdateZone  = IX_OSAL_CACHE_DMA_MALLOC(FULL_VLAN_BYTE_SIZE);
-
-            if (update->npeUpdateZone == NULL
-                || update->npeGwUpdateZone == NULL
-                || update->vlanUpdateZone == NULL)
-            {
-                ERROR_LOG("Fatal error: IX_ACC_DRV_DMA_MALLOC() returned NULL, no NPE update zones available\n");
-            }
-            else
-            {
-                memset(update->npeUpdateZone, 0, FULL_ELT_BYTE_SIZE);
-                memset(update->npeGwUpdateZone, 0, FULL_GW_BYTE_SIZE);
-                memset(update->vlanUpdateZone, 0, FULL_VLAN_BYTE_SIZE);
-            }
-        }
-        else
-        {
-            /* unused */
-            update->npeUpdateZone   = NULL;
-            update->npeGwUpdateZone = NULL;
-            update->vlanUpdateZone  = NULL;
-        }
-    }
-}
-
-/**
- * @brief deallocates the NPE update areas for all the ports
- *
- * This function is called at component de-initialization time
- * by @ref ixEthDBUnload().
- *
- * @warning do not call manually
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBNPEUpdateAreasUnload(void)
-{
-    UINT32 portIndex;
-
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE)
-        {
-            IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone);
-            IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.npeGwUpdateZone);
-            IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.vlanUpdateZone);
-        }
-    }
-}
-
-/**
- * @brief general-purpose NPE callback function
- *
- * @param npeID NPE ID
- * @param msg NPE message
- *
- * This function will unblock the caller by unlocking
- * the npeAckLock mutex defined for each NPE port
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBNpeMsgAck(IxNpeMhNpeId npeID, IxNpeMhMessage msg)
-{
-    IxEthDBPortId portID = IX_ETH_DB_NPE_TO_PORT_ID(npeID);
-    PortInfo *portInfo;
-
-    if (portID >= IX_ETH_DB_NUMBER_OF_PORTS)
-    {
-        /* invalid port */
-        return;
-    }
-
-    if (ixEthDBPortDefinitions[portID].type != IX_ETH_NPE)
-    {
-        /* not an NPE */
-        return;
-    }
-
-    portInfo = &ixEthDBPortInfo[portID];
-    
-    ixOsalMutexUnlock(&portInfo->npeAckLock);
-}
-
-/**
- * @brief synchronizes the database with tree
- *
- * @param portID port ID of the NPE whose tree is to be scanned
- * @param eltBaseAddress memory base address of the NPE serialized tree
- * @param eltSize size in bytes of the NPE serialized tree
- *
- * Scans the NPE learning tree and resets the age of active database records.
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBNPESyncScan(IxEthDBPortId portID, void *eltBaseAddress, UINT32 eltSize)
-{
-    UINT32 eltEntryOffset;
-    UINT32 entryPortID;
-
-    /* invalidate cache */
-    IX_OSAL_CACHE_INVALIDATE(eltBaseAddress, eltSize);
-
-    for (eltEntryOffset = ELT_ROOT_OFFSET ; eltEntryOffset < eltSize ; eltEntryOffset += ELT_ENTRY_SIZE)
-    {
-        /* (eltBaseAddress + eltEntryOffset) points to a valid NPE tree node
-         *
-         * the format of the node is MAC[6 bytes]:PortID[1 byte]:Reserved[6 bits]:Active[1 bit]:Valid[1 bit]
-         * therefore we can just use the pointer for database searches as only the first 6 bytes are checked
-         */
-        void *eltNodeAddress       = (void *) ((UINT32) eltBaseAddress + eltEntryOffset);
-
-        /* debug */
-        IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) checking node at offset %d...\n", eltEntryOffset / ELT_ENTRY_SIZE);
-
-        if (IX_EDB_NPE_NODE_VALID(eltNodeAddress) != true)
-        {
-            IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is empty\n");
-        }
-        else if (eltEntryOffset == ELT_ROOT_OFFSET)
-        {
-            IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is root\n");
-        }
-
-        if (IX_EDB_NPE_NODE_VALID(eltNodeAddress))
-        {
-            entryPortID = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(IX_EDB_NPE_NODE_PORT_ID(eltNodeAddress));
-
-            /* check only active entries belonging to this port */
-            if (ixEthDBPortInfo[portID].agingEnabled && IX_EDB_NPE_NODE_ACTIVE(eltNodeAddress) && (portID == entryPortID)
-                && ((ixEthDBPortDefinitions[portID].capabilities & IX_ETH_ENTRY_AGING) == 0))
-            {
-                /* search record */
-                HashNode *node = ixEthDBSearch((IxEthDBMacAddr *) eltNodeAddress, IX_ETH_DB_ALL_FILTERING_RECORDS);
-
-                /* safety check, maybe user deleted record right before sync? */
-                if (node != NULL)
-                {
-                    /* found record */
-                    MacDescriptor *descriptor = (MacDescriptor *) node->data;
-
-                    IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) synced entry [%s] already in the database, updating fields\n", mac2string(eltNodeAddress));
-
-                    /* reset age - set to -1 so that maintenance will restore it to 0 (or more) when incrementing */
-                    if (!descriptor->recordData.filteringData.staticEntry)
-                    {
-                        if (descriptor->type == IX_ETH_DB_FILTERING_RECORD)
-                        {
-                            descriptor->recordData.filteringData.age = AGE_RESET;
-                        }
-                        else if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD)
-                        {
-                            descriptor->recordData.filteringVlanData.age = AGE_RESET;
-                        }
-                    }
-
-                    /* end transaction */
-                    ixEthDBReleaseHashNode(node);
-                }
-            }
-            else
-            {
-                IX_ETH_DB_NPE_VERBOSE_TRACE("\t... found portID %d, we check only port %d\n", entryPortID, portID);
-            }
-        }
-    }
-}
-
-/**
- * @brief writes a search tree in NPE format
- *
- * @param type type of records to be written into the NPE update zone
- * @param totalSize maximum size of the linearized tree
- * @param baseAddress memory base address where to write the NPE tree into
- * @param tree search tree to write in NPE format
- * @param blocks number of written 64-byte blocks
- * @param startIndex optimal binary search start index
- *
- * Serializes the given tree in NPE linear format
- *
- * @return none
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBNPETreeWrite(IxEthDBRecordType type, UINT32 totalSize, void *baseAddress, MacTreeNode *tree, UINT32 *epDelta, UINT32 *blocks)
-{
-    MacTreeNodeStack *stack;
-    UINT32 maxOffset = 0;
-    UINT32 emptyOffset;
-
-    stack = ixOsalCacheDmaMalloc(sizeof (MacTreeNodeStack));
-    
-    if (stack == NULL)
-    {
-        ERROR_LOG("DB: (NPEAdaptor) failed to allocate the node stack for learning tree linearization, out of memory?\n");
-        return;
-    }
-
-    /* zero out empty root */
-    memset(baseAddress, 0, ELT_ENTRY_SIZE);
-
-    NODE_STACK_INIT(stack);
-
-    if (tree != NULL)
-    {
-        /* push tree root at offset 1 */
-        NODE_STACK_PUSH(stack, tree, 1);
-
-        maxOffset = 1;
-    }
-
-    while (NODE_STACK_NONEMPTY(stack))
-    {
-        MacTreeNode *node;
-        UINT32 offset;
-
-        NODE_STACK_POP(stack, node, offset);
-
-        /* update maximum offset */
-        if (offset > maxOffset)
-        {
-            maxOffset = offset;
-        }
-
-        IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) writing MAC [%s] at offset %d\n", mac2string(node->descriptor->macAddress), offset);
-
-        /* add node to NPE ELT at position indicated by offset */
-        if (offset < MAX_ELT_SIZE)
-        {
-            ixEthDBNPENodeWrite[type]((void *) (((UINT32) baseAddress) + offset * ELT_ENTRY_SIZE), node);
-        }
-
-        if (node->left != NULL)
-        {
-            NODE_STACK_PUSH(stack, node->left, LEFT_CHILD_OFFSET(offset));
-        }
-        else
-        {
-            /* ensure this entry is zeroed */
-            memset((void *) ((UINT32) baseAddress + LEFT_CHILD_OFFSET(offset) * ELT_ENTRY_SIZE), 0, ELT_ENTRY_SIZE);
-        }
-
-        if (node->right != NULL)
-        {
-            NODE_STACK_PUSH(stack, node->right, RIGHT_CHILD_OFFSET(offset));
-        }
-        else
-        {
-            /* ensure this entry is zeroed */
-            memset((void *) ((UINT32) baseAddress + RIGHT_CHILD_OFFSET(offset) * ELT_ENTRY_SIZE), 0, ELT_ENTRY_SIZE);
-        }
-    }
-    
-    emptyOffset = maxOffset + 1;
-
-    /* zero out rest of the tree */
-    IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Emptying tree from offset %d, address 0x%08X, %d bytes\n", 
-        emptyOffset, ((UINT32) baseAddress) + emptyOffset * ELT_ENTRY_SIZE, totalSize - (emptyOffset * ELT_ENTRY_SIZE));
-
-    if (emptyOffset < MAX_ELT_SIZE - 1)
-    {
-        memset((void *) (((UINT32) baseAddress) + (emptyOffset * ELT_ENTRY_SIZE)), 0, totalSize - (emptyOffset * ELT_ENTRY_SIZE));
-    }
-
-    /* flush cache */
-    IX_OSAL_CACHE_FLUSH(baseAddress, totalSize);
-
-    /* debug */
-    IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Ethernet learning/filtering tree XScale wrote at address 0x%08X (max %d bytes):\n\n",
-        (UINT32) baseAddress, FULL_ELT_BYTE_SIZE);
-
-    IX_ETH_DB_NPE_DUMP_ELT(baseAddress, FULL_ELT_BYTE_SIZE);
-    
-    /* compute number of 64-byte blocks */
-    if (blocks != NULL)
-    {
-        *blocks = maxOffset != 0 ? 1 + maxOffset / 8 : 0;
-
-        IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Wrote %d 64-byte blocks\n", *blocks);
-    }
-    
-    /* compute epDelta - start index for binary search */
-    if (epDelta != NULL)
-    {
-        UINT32 deltaIndex = 0;
-
-        *epDelta = 0;
-        
-        for (; deltaIndex < IX_ETH_DB_MAX_DELTA_ZONES ; deltaIndex ++)
-        {
-            if (ixEthDBEPDeltaOffset[type][deltaIndex] >= maxOffset)
-            {
-                *epDelta = ixEthDBEPDelta[type][deltaIndex];
-                break;
-            }
-        }
-
-        IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Computed epDelta %d (based on maxOffset %d)\n", *epDelta, maxOffset);
-    }
-
-    ixOsalCacheDmaFree(stack);
-}
-
-/**
- * @brief implements a dummy node serialization function
- *
- * @param address address of where the node is to be serialized (unused)
- * @param node tree node to be serialized (unused)
- *
- * This function is registered for safety reasons and should
- * never be called. It will display an error message if this
- * function is called.
- *
- * @return none
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBNullSerialize(void *address, MacTreeNode *node)
-{
-    IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Warning, the NullSerialize function was called, wrong record type?\n");
-}
-
-/**
- * @brief writes a filtering entry in NPE linear format
- *
- * @param address memory address to write node to
- * @param node node to be written
- *
- * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree
- * in NPE-readable format.
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBNPELearningNodeWrite(void *address, MacTreeNode *node)
-{
-    /* copy mac address */
-    memcpy(address, node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE);
-
-    /* copy port ID */
-    NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET) = IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(node->descriptor->portID);
-
-    /* copy flags (valid and not active, as the NPE sets it to active) and clear reserved section (bits 2-7) */
-    NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) = (UINT8) IX_EDB_FLAGS_INACTIVE_VALID;
-
-    IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) writing ELT node 0x%08x:0x%08x\n", * (UINT32 *) address, * (((UINT32 *) (address)) + 1));
-}
-
-/**
- * @brief writes a WiFi header conversion record in
- * NPE linear format
- *
- * @param address memory address to write node to
- * @param node node to be written
- *
- * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree
- * in NPE-readable format.
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBNPEWiFiNodeWrite(void *address, MacTreeNode *node)
-{
-    /* copy mac address */
-    memcpy(address, node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE);
-
-    /* copy index */
-    NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_WIFI_INDEX_OFFSET) = node->descriptor->recordData.wifiData.gwAddressIndex;
-
-    /* copy flags (type and valid) */
-    NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_WIFI_FLAGS_OFFSET) = node->descriptor->recordData.wifiData.type << 1 | IX_EDB_FLAGS_VALID;
-}
-
-/**
- * @brief writes a WiFi gateway header conversion record in
- * NPE linear format
- *
- * @param address memory address to write node to
- * @param node node to be written
- *
- * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree
- * in NPE-readable format.
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBNPEGatewayNodeWrite(void *address, MacTreeNode *node)
-{
-    /* copy mac address */
-    memcpy(address, node->descriptor->recordData.wifiData.gwMacAddress, IX_IEEE803_MAC_ADDRESS_SIZE);
-
-    /* set reserved field, two bytes */
-    NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET)     = 0;
-    NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET + 1) = 0;
-}
-
-/**
- * @brief writes a firewall record in
- * NPE linear format
- *
- * @param address memory address to write node to
- * @param node node to be written
- *
- * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree
- * in NPE-readable format.
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBNPEFirewallNodeWrite(void *address, MacTreeNode *node)
-{
-    /* set reserved field */
-    NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET) = 0;
-
-    /* set flags */
-    NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_FLAGS_OFFSET) = IX_EDB_FLAGS_VALID;
-
-    /* copy mac address */
-    memcpy((void *) ((UINT32) address + IX_EDB_NPE_NODE_FW_ADDR_OFFSET), node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE);
-}
-
-/**
- * @brief registers the NPE serialization methods
- *
- * This functions registers NPE serialization methods
- * for writing the following types of records in NPE
- * readable linear format:
- * - filtering records
- * - WiFi header conversion records
- * - WiFi gateway header conversion records
- * - firewall records
- *
- * Note that this function should be called by the
- * component initialization function.
- *
- * @return number of registered record types
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-UINT32 ixEthDBRecordSerializeMethodsRegister()
-{
-    int i;
-    
-    /* safety - register a blank method for everybody first */
-    for ( i = 0 ; i < IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1 ; i++)
-    {
-        ixEthDBNPENodeWrite[i] = ixEthDBNullSerialize;
-    }
-    
-    /* register real methods */
-    ixEthDBNPENodeWrite[IX_ETH_DB_FILTERING_RECORD]      = ixEthDBNPELearningNodeWrite;
-    ixEthDBNPENodeWrite[IX_ETH_DB_FILTERING_VLAN_RECORD] = ixEthDBNPELearningNodeWrite;
-    ixEthDBNPENodeWrite[IX_ETH_DB_WIFI_RECORD]           = ixEthDBNPEWiFiNodeWrite;
-    ixEthDBNPENodeWrite[IX_ETH_DB_FIREWALL_RECORD]       = ixEthDBNPEFirewallNodeWrite;
-    ixEthDBNPENodeWrite[IX_ETH_DB_GATEWAY_RECORD]        = ixEthDBNPEGatewayNodeWrite;
-    
-    /* EP Delta arrays */
-    memset(ixEthDBEPDeltaOffset, 0, sizeof (ixEthDBEPDeltaOffset));
-    memset(ixEthDBEPDelta, 0, sizeof (ixEthDBEPDelta));
-    
-    /* filtering records */
-    ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][0] = 1;
-    ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][0]       = 0;
-    
-    ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][1] = 3;
-    ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][1]       = 7;
-    
-    ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][2] = 511;
-    ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][2]       = 14;
-    
-    /* wifi records */
-    ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][0] = 1;
-    ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][0]       = 0;
-    
-    ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][1] = 3;
-    ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][1]       = 7;
-    
-    ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][2] = 511;
-    ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][2]       = 14;
-
-    /* firewall records */
-    ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][0] = 0;
-    ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][0]       = 0;
-    
-    ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][1] = 1;
-    ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][1]       = 5;
-    
-    ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][2] = 3;
-    ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][2]       = 13;
-    
-    ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][3] = 7;
-    ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][3]       = 21;
-    
-    ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][4] = 15;
-    ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][4]       = 29;
-    
-    ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][5] = 31;
-    ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][5]       = 37;
-    
-    return 5; /* 5 methods registered */
-}
-
-#ifndef IX_NDEBUG
-
-IX_ETH_DB_PUBLIC UINT32 npeMsgHistory[IX_ETH_DB_NPE_MSG_HISTORY_DEPTH][2];
-IX_ETH_DB_PUBLIC UINT32 npeMsgHistoryLen = 0;
-
-/**
- * When compiled in DEBUG mode, this function can be used to display
- * the history of messages sent to the NPEs (up to 100).
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBShowNpeMsgHistory()
-{
-    UINT32 i = 0;
-    UINT32 base, len;
-
-    if (npeMsgHistoryLen <= IX_ETH_DB_NPE_MSG_HISTORY_DEPTH)
-    {
-        base = 0;
-        len  = npeMsgHistoryLen;
-    }
-    else
-    {
-        base = npeMsgHistoryLen % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH;
-        len  = IX_ETH_DB_NPE_MSG_HISTORY_DEPTH;
-    }
-
-    printf("NPE message history [last %d messages, from least to most recent]:\n", len);
-
-    for (; i < len ; i++)
-    {
-        UINT32 pos = (base + i) % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH;
-        printf("msg[%d]: 0x%08x:0x%08x\n", i, npeMsgHistory[pos][0], npeMsgHistory[pos][1]);
-    }
-}
-
-IX_ETH_DB_PUBLIC
-void ixEthDBELTShow(IxEthDBPortId portID)
-{
-    IxNpeMhMessage message;
-    IX_STATUS result;
-    
-    /* send EDB_GetMACAddressDatabase message */
-    FILL_GETMACADDRESSDATABASE(message, 
-        0 /* reserved */, 
-        IX_OSAL_MMU_VIRT_TO_PHYS(ixEthDBPortInfo[portID].updateMethod.npeUpdateZone));
-
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-
-    if (result == IX_SUCCESS)
-    {
-        /* analyze NPE copy */
-        UINT32 eltEntryOffset;
-        UINT32 entryPortID;
-
-        UINT32 eltBaseAddress = (UINT32) ixEthDBPortInfo[portID].updateMethod.npeUpdateZone;
-        UINT32 eltSize        = FULL_ELT_BYTE_SIZE;
-
-        /* invalidate cache */
-        IX_OSAL_CACHE_INVALIDATE((void *) eltBaseAddress, eltSize);
-
-        printf("Listing records in main learning tree for port %d\n", portID);
-
-        for (eltEntryOffset = ELT_ROOT_OFFSET ; eltEntryOffset < eltSize ; eltEntryOffset += ELT_ENTRY_SIZE)
-        {
-            /* (eltBaseAddress + eltEntryOffset) points to a valid NPE tree node
-            *
-            * the format of the node is MAC[6 bytes]:PortID[1 byte]:Reserved[6 bits]:Active[1 bit]:Valid[1 bit]
-            * therefore we can just use the pointer for database searches as only the first 6 bytes are checked
-            */
-            void *eltNodeAddress = (void *) ((UINT32) eltBaseAddress + eltEntryOffset);
-
-            if (IX_EDB_NPE_NODE_VALID(eltNodeAddress))
-            {
-                HashNode *node;
-
-                entryPortID = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(IX_EDB_NPE_NODE_PORT_ID(eltNodeAddress));
-
-                /* search record */
-                node = ixEthDBSearch((IxEthDBMacAddr *) eltNodeAddress, IX_ETH_DB_ALL_RECORD_TYPES);
-
-                printf("%s - port %d - %s ", mac2string((unsigned char *) eltNodeAddress), entryPortID, 
-                    IX_EDB_NPE_NODE_ACTIVE(eltNodeAddress) ? "active" : "inactive");
-
-                /* safety check, maybe user deleted record right before sync? */
-                if (node != NULL)
-                {
-                    /* found record */
-                    MacDescriptor *descriptor = (MacDescriptor *) node->data;
-
-                    printf("- %s ",
-                        descriptor->type == IX_ETH_DB_FILTERING_RECORD ? "filtering" :
-                        descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD ? "vlan" :
-                        descriptor->type == IX_ETH_DB_WIFI_RECORD ? "wifi" : "other (check main DB)");
-
-                    if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) printf("- age %d - %s ", 
-                        descriptor->recordData.filteringData.age,
-                        descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic");
-
-                    if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) printf("- age %d - %s - tci %d ",
-                        descriptor->recordData.filteringVlanData.age,
-                        descriptor->recordData.filteringVlanData.staticEntry ? "static" : "dynamic",
-                        descriptor->recordData.filteringVlanData.ieee802_1qTag);
-
-                    /* end transaction */
-                    ixEthDBReleaseHashNode(node);
-                }
-                else
-                {
-                    printf("- not synced");
-                }
-
-                printf("\n");
-            }
-        }
-    }
-    else
-    {
-        ixOsalLog(IX_OSAL_LOG_LVL_FATAL, IX_OSAL_LOG_DEV_STDOUT, 
-            "EthDB: (ShowELT) Could not complete action (communication failure)\n",
-            portID, 0, 0, 0, 0, 0);
-    }
-}
-
-#endif
diff --git a/drivers/net/npe/IxEthDBPortUpdate.c b/drivers/net/npe/IxEthDBPortUpdate.c
deleted file mode 100644
index 92af331..0000000
--- a/drivers/net/npe/IxEthDBPortUpdate.c
+++ /dev/null
@@ -1,716 +0,0 @@
-/**
- * @file IxEthDBDBPortUpdate.c
- *
- * @brief Implementation of dependency and port update handling
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxEthDB_p.h"
-
-/* forward prototype declarations */
-IX_ETH_DB_PRIVATE MacTreeNode* ixEthDBTreeInsert(MacTreeNode *searchTree, MacDescriptor *descriptor);
-IX_ETH_DB_PRIVATE void ixEthDBCreateTrees(IxEthDBPortMap updatePorts);
-IX_ETH_DB_PRIVATE MacTreeNode* ixEthDBTreeRebalance(MacTreeNode *searchTree);
-IX_ETH_DB_PRIVATE void ixEthDBRebalanceTreeToVine(MacTreeNode *root, UINT32 *size);
-IX_ETH_DB_PRIVATE void ixEthDBRebalanceVineToTree(MacTreeNode *root, UINT32 size);
-IX_ETH_DB_PRIVATE void ixEthDBRebalanceCompression(MacTreeNode *root, UINT32 count);
-IX_ETH_DB_PRIVATE UINT32 ixEthDBRebalanceLog2Floor(UINT32 x);
-
-extern HashTable dbHashtable;
-
-/**
- * @brief register types requiring automatic updates
- *
- * @param typeArray array indexed on record types, each
- * element indicating whether the record type requires an
- * automatic update (true) or not (false)
- * 
- * Automatic updates are done for registered record types
- * upon adding, updating (that is, updating the record portID) 
- * and removing records. Whenever an automatic update is triggered
- * the appropriate ports will be provided with new database
- * information.
- *
- * It is assumed that the typeArray parameter is allocated large
- * enough to hold all the user defined types. Also, the type
- * array should be initialized to false as this function only
- * caters for types which do require automatic updates.
- *
- * Note that this function should be called by the component
- * initialization function.
- *
- * @return number of record types registered for automatic
- * updates
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-UINT32 ixEthDBUpdateTypeRegister(BOOL *typeArray)
-{
-    typeArray[IX_ETH_DB_FILTERING_RECORD]      = true;
-    typeArray[IX_ETH_DB_FILTERING_VLAN_RECORD] = true;
-
-    return 2;
-}
-
-/**
- * @brief computes dependencies and triggers port learning tree updates
- *
- * @param triggerPorts port map consisting in the ports which triggered the update
- *
- * This function browses through all the ports and determines how to waterfall the update
- * event from the trigger ports to all other ports depending on them.
- *
- * Once the list of ports to be updated is determined this function 
- * calls @ref ixEthDBCreateTrees.
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBUpdatePortLearningTrees(IxEthDBPortMap triggerPorts)
-{
-    IxEthDBPortMap updatePorts;
-    UINT32 portIndex;
-    
-    ixEthDBUpdateLock();
-    
-    SET_EMPTY_DEPENDENCY_MAP(updatePorts);
-    
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        PortInfo *port   = &ixEthDBPortInfo[portIndex];
-        BOOL mapsCollide;
-        
-        MAPS_COLLIDE(mapsCollide, triggerPorts, port->dependencyPortMap);
-
-        if (mapsCollide                                   /* do triggers influence this port? */
-            && !IS_PORT_INCLUDED(portIndex, updatePorts)  /* and it's not already in the update list */
-            && port->updateMethod.updateEnabled)          /* and we're allowed to update it */
-        {
-            IX_ETH_DB_UPDATE_TRACE("DB: (Update) Adding port %d to update set\n", portIndex);
-
-            JOIN_PORT_TO_MAP(updatePorts, portIndex);
-        }
-        else
-        {
-            IX_ETH_DB_UPDATE_TRACE("DB: (Update) Didn't add port %d to update set, reasons follow:\n", portIndex);
-
-            if (!mapsCollide)
-            {
-                IX_ETH_DB_UPDATE_TRACE("\tMaps don't collide on port %d\n", portIndex);
-            }
-
-            if (IS_PORT_INCLUDED(portIndex, updatePorts))
-            {
-                IX_ETH_DB_UPDATE_TRACE("\tPort %d is already in the update set\n", portIndex);
-            }
-
-            if (!port->updateMethod.updateEnabled)
-            {
-                IX_ETH_DB_UPDATE_TRACE("\tPort %d doesn't have updateEnabled set\n", portIndex);
-            }
-        }
-    }
-    
-    IX_ETH_DB_UPDATE_TRACE("DB: (Update) Updating port set\n");
-
-    ixEthDBCreateTrees(updatePorts);
-        
-    ixEthDBUpdateUnlock();
-}
-
-/**
- * @brief creates learning trees and calls the port update handlers
- *
- * @param updatePorts set of ports in need of learning trees
- *
- * This function determines the optimal method of creating learning
- * trees using a minimal number of database queries, keeping in mind
- * that different ports can either use the same learning trees or they
- * can partially share them. The actual tree building routine is
- * @ref ixEthDBQuery.
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBCreateTrees(IxEthDBPortMap updatePorts)
-{
-    UINT32 portIndex;
-    BOOL result;
-    BOOL portsLeft = true;
-
-    while (portsLeft)
-    {
-        /* get port with minimal dependency map and NULL search tree */
-        UINT32 minPortIndex = MAX_PORT_SIZE;
-        UINT32 minimalSize  = MAX_PORT_SIZE;
-
-        for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-        {
-            UINT32 size;
-            PortInfo *port = &ixEthDBPortInfo[portIndex];
-
-            /* generate trees only for ports that need them */
-            if (!port->updateMethod.searchTreePendingWrite && IS_PORT_INCLUDED(portIndex, updatePorts))
-            {
-                GET_MAP_SIZE(port->dependencyPortMap, size);
-                
-                IX_ETH_DB_UPDATE_TRACE("DB: (Update) Dependency map for port %d: size %d\n",
-                    portIndex, size);
-
-                if (size < minimalSize)
-                {
-                    minPortIndex = portIndex;
-                    minimalSize  = size;
-                }
-            }
-            else
-            {
-                IX_ETH_DB_UPDATE_TRACE("DB: (Update) Skipped port %d from tree diff (%s)\n", portIndex,
-                    port->updateMethod.searchTreePendingWrite ? "pending write access" : "ignored by query");
-            }            
-        }
-
-        /* if a port was found than minimalSize is not MAX_PORT_SIZE */
-        if (minimalSize != MAX_PORT_SIZE)
-        {
-            /* minPortIndex is the port we seek */
-            PortInfo *port = &ixEthDBPortInfo[minPortIndex];
-
-            IxEthDBPortMap query;
-            MacTreeNode *baseTree;
-
-            /* now try to find a port with minimal map difference */
-            PortInfo *minimalDiffPort = NULL;
-            UINT32 minimalDiff        = MAX_PORT_SIZE;
-            
-            IX_ETH_DB_UPDATE_TRACE("DB: (Update) Minimal size port is %d\n", minPortIndex);
-
-            for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-            {   
-                PortInfo *diffPort = &ixEthDBPortInfo[portIndex];
-                BOOL mapIsSubset;
-                
-                IS_MAP_SUBSET(mapIsSubset, diffPort->dependencyPortMap, port->dependencyPortMap);
-                
-
-                if (portIndex != minPortIndex
-                    && diffPort->updateMethod.searchTree != NULL
-                    && mapIsSubset)
-                {
-                    /* compute size and pick only minimal size difference */
-                    UINT32 diffPortSize;
-                    UINT32 sizeDifference;
-
-                    GET_MAP_SIZE(diffPort->dependencyPortMap, diffPortSize);
-                     
-                    IX_ETH_DB_UPDATE_TRACE("DB: (Update) Checking port %d for differences...\n", portIndex);
-
-                    sizeDifference = minimalSize - diffPortSize;
-
-                    if (sizeDifference < minimalDiff)
-                    {
-                        minimalDiffPort = diffPort;
-                        minimalDiff     = sizeDifference;
-                        
-                        IX_ETH_DB_UPDATE_TRACE("DB: (Update) Minimal difference 0x%x was found on port %d\n",
-                            minimalDiff, portIndex);
-                    }
-                }
-            }
-
-            /* check if filtering is enabled on this port */
-            if ((port->featureStatus & IX_ETH_DB_FILTERING) != 0)
-            {
-                /* if minimalDiff is not MAX_PORT_SIZE minimalDiffPort points to the most similar port */
-                if (minimalDiff != MAX_PORT_SIZE)
-                {
-                    baseTree = ixEthDBCloneMacTreeNode(minimalDiffPort->updateMethod.searchTree);
-                    DIFF_MAPS(query, port->dependencyPortMap , minimalDiffPort->dependencyPortMap);
-                    
-                    IX_ETH_DB_UPDATE_TRACE("DB: (Update) Found minimal diff, extending tree %d on query\n",
-                        minimalDiffPort->portID);
-                }
-                else /* .. otherwise no similar port was found, build tree from scratch */
-                {
-                    baseTree = NULL;
-                    
-                    COPY_DEPENDENCY_MAP(query, port->dependencyPortMap);
-                    
-                    IX_ETH_DB_UPDATE_TRACE("DB: (Update) No similar diff, creating tree from query\n");
-                }
-
-                IS_EMPTY_DEPENDENCY_MAP(result, query);
-                
-                if (!result) /* otherwise we don't need anything more on top of the cloned tree */
-                {
-                    IX_ETH_DB_UPDATE_TRACE("DB: (Update) Adding query tree to port %d\n", minPortIndex);
-                        
-                    /* build learning tree */
-                    port->updateMethod.searchTree = ixEthDBQuery(baseTree, query, IX_ETH_DB_ALL_FILTERING_RECORDS, MAX_ELT_SIZE);
-                }
-                else
-                {
-                    IX_ETH_DB_UPDATE_TRACE("DB: (Update) Query is empty, assuming identical nearest tree\n");
-                      
-                    port->updateMethod.searchTree = baseTree;
-                }
-            }
-            else
-            {
-                /* filtering is not enabled, will download an empty tree */
-                if (port->updateMethod.searchTree != NULL)
-                {
-                    ixEthDBFreeMacTreeNode(port->updateMethod.searchTree);
-                }
-
-                port->updateMethod.searchTree = NULL;
-            }
-
-            /* mark tree as valid */
-            port->updateMethod.searchTreePendingWrite = true;
-        }
-        else
-        {
-            portsLeft = false;
-
-            IX_ETH_DB_UPDATE_TRACE("DB: (Update) No trees to create this round\n");            
-        }
-    }
-    
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        PortInfo *updatePort = &ixEthDBPortInfo[portIndex];
-
-        if (updatePort->updateMethod.searchTreePendingWrite)
-        {
-            IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) Starting procedure to upload new search tree (%snull) into NPE %d\n", 
-                updatePort->updateMethod.searchTree != NULL ? "not " : "",
-                portIndex);
-
-            updatePort->updateMethod.updateHandler(portIndex, IX_ETH_DB_FILTERING_RECORD);
-        }
-    }
-}
-
-/**
- * @brief standard NPE update handler
- *
- * @param portID id of the port to be updated
- * @param type record type to be pushed during this update
- *
- * The NPE update handler manages updating the NPE databases
- * given a certain record type.
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType type)
-{
-    UINT32 epDelta, blockCount;
-    IxNpeMhMessage message;
-    UINT32 treeSize = 0;
-    PortInfo *port = &ixEthDBPortInfo[portID];
-
-    /* size selection and type check */
-    if (type == IX_ETH_DB_FILTERING_RECORD || type == IX_ETH_DB_WIFI_RECORD)
-    {
-        treeSize = FULL_ELT_BYTE_SIZE;
-    }
-    else if (type == IX_ETH_DB_FIREWALL_RECORD)
-    {
-        treeSize = FULL_FW_BYTE_SIZE;
-    }
-    else
-    {
-        return IX_ETH_DB_INVALID_ARG;
-    }
-    
-    /* serialize tree into memory */
-    ixEthDBNPETreeWrite(type, treeSize, port->updateMethod.npeUpdateZone, port->updateMethod.searchTree, &epDelta, &blockCount);
-
-    /* free internal copy */
-    if (port->updateMethod.searchTree != NULL)
-    {
-        ixEthDBFreeMacTreeNode(port->updateMethod.searchTree);
-    }
-
-    /* forget last used search tree */
-    port->updateMethod.searchTree             = NULL;
-    port->updateMethod.searchTreePendingWrite = false;
-
-    /* dependending on the update type we do different things */
-    if (type == IX_ETH_DB_FILTERING_RECORD || type == IX_ETH_DB_WIFI_RECORD)
-    {
-        IX_STATUS result;
-
-        FILL_SETMACADDRESSDATABASE_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), 
-            epDelta, blockCount, 
-            IX_OSAL_MMU_VIRT_TO_PHYS(port->updateMethod.npeUpdateZone));
-
-        IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-
-        if (result == IX_SUCCESS)
-	{
-            IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) Finished downloading NPE tree on port %d\n", portID);
-        }
-        else
-        {
-            ixEthDBPortInfo[portID].agingEnabled                = false;
-            ixEthDBPortInfo[portID].updateMethod.updateEnabled  = false;
-            ixEthDBPortInfo[portID].updateMethod.userControlled = true;
-
-            ERROR_LOG("EthDB: (PortUpdate) disabling aging and updates on port %d (assumed dead)\n", portID);
-
-            ixEthDBDatabaseClear(portID, IX_ETH_DB_ALL_RECORD_TYPES);
-
-            return IX_ETH_DB_FAIL;
-        }
-
-	return IX_ETH_DB_SUCCESS;
-    }
-    else if (type == IX_ETH_DB_FIREWALL_RECORD)
-    {
-        return ixEthDBFirewallUpdate(portID, port->updateMethod.npeUpdateZone, epDelta);
-    }
-    
-    return IX_ETH_DB_INVALID_ARG;
-}
-
-/**
- * @brief queries the database for a set of records to be inserted into a given tree
- *
- * @param searchTree pointer to a tree where insertions will be performed; can be NULL
- * @param query set of ports that a database record must match to be inserted into the tree
- *
- * The query method browses through the database, extracts all the descriptors matching
- * the given query parameter and inserts them into the given learning tree.
- * Note that this is an append procedure, the given tree needs not to be empty.
- * A "descriptor matching the query" is a descriptor whose port id is in the query map.
- * If the given tree is empty (NULL) a new tree is created and returned.
- * 
- * @return the tree root
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-MacTreeNode* ixEthDBQuery(MacTreeNode *searchTree, IxEthDBPortMap query, IxEthDBRecordType recordFilter, UINT32 maxEntries)
-{
-    HashIterator iterator;
-    UINT32 entryCount = 0;
-
-    /* browse database */
-    BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator));
-
-    while (IS_ITERATOR_VALID(&iterator))
-    {
-        MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data;
-
-        IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) querying [%s]:%d on port map ... ", 
-            mac2string(descriptor->macAddress), 
-            descriptor->portID);
-
-	if ((descriptor->type & recordFilter) != 0 
-            && IS_PORT_INCLUDED(descriptor->portID, query))
-	{
-            MacDescriptor *descriptorClone = ixEthDBCloneMacDescriptor(descriptor);
-
-            IX_ETH_DB_UPDATE_TRACE("match\n");
-
-            if (descriptorClone != NULL)
-            {
-                /* add descriptor to tree */
-                searchTree = ixEthDBTreeInsert(searchTree, descriptorClone);
-
-                entryCount++;
-            }
-        }
-        else
-        {
-            IX_ETH_DB_UPDATE_TRACE("no match\n");
-        }
-
-        if (entryCount < maxEntries)
-        {
-            /* advance to the next record */
-	        BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator));
-        }
-        else
-        {
-            /* the NPE won't accept more entries so we can stop now */
-            ixEthDBReleaseHashIterator(&iterator);
-
-            IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) number of elements reached maximum supported by port\n");
-
-            break;
-        }
-    }
-
-    IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) query inserted %d records in the search tree\n", entryCount);
-
-    return ixEthDBTreeRebalance(searchTree);
-}
-
-/**
- * @brief inserts a mac descriptor into an tree
- *
- * @param searchTree tree where the insertion is to be performed (may be NULL)
- * @param descriptor descriptor to insert into tree
- *
- * @return the tree root
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-MacTreeNode* ixEthDBTreeInsert(MacTreeNode *searchTree, MacDescriptor *descriptor)
-{
-    MacTreeNode *currentNode    = searchTree;
-    MacTreeNode *insertLocation = NULL;
-    MacTreeNode *newNode;
-    INT32 insertPosition = RIGHT;
-
-    if (descriptor == NULL)
-    {
-        return searchTree;
-    }
-
-    /* create a new node */
-    newNode = ixEthDBAllocMacTreeNode();
-
-    if (newNode == NULL)
-    {
-        /* out of memory */
-        ERROR_LOG("Warning: ixEthDBAllocMacTreeNode returned NULL in file %s:%d (out of memory?)\n", __FILE__, __LINE__);
-
-        ixEthDBFreeMacDescriptor(descriptor);
-
-        return NULL;
-    }
-
-    /* populate node */
-    newNode->descriptor = descriptor;
-
-    /* an empty initial tree is a special case */
-    if (searchTree == NULL)
-    {
-        return newNode;
-    }
-
-    /* get insertion location */
-    while (insertLocation == NULL)
-    {
-        MacTreeNode *nextNode;
-
-        /* compare given key with current node key */
-        insertPosition = ixEthDBAddressCompare(descriptor->macAddress, currentNode->descriptor->macAddress);
-
-        /* navigate down */
-        if (insertPosition == RIGHT)
-        {
-            nextNode = currentNode->right;
-        }
-        else if (insertPosition == LEFT)
-        {
-            nextNode = currentNode->left;
-        }
-        else
-        {
-            /* error, duplicate key */
-            ERROR_LOG("Warning: trapped insertion of a duplicate MAC address in an NPE search tree\n");
-
-            /* this will free the MAC descriptor as well */
-            ixEthDBFreeMacTreeNode(newNode);
-
-            return searchTree;
-        }
-
-        /* when we can no longer dive through the tree we found the insertion place */
-        if (nextNode != NULL)
-        {
-            currentNode = nextNode;
-        }
-        else
-        {
-            insertLocation = currentNode;
-        }
-    }
-
-    /* insert node */
-    if (insertPosition == RIGHT)
-    {
-        insertLocation->right = newNode;
-    }
-    else
-    {
-        insertLocation->left = newNode;
-    }
-
-    return searchTree;
-}
-
-/**
- * @brief balance a tree
- *
- * @param searchTree tree to balance
- *
- * Converts a tree into a balanced tree and returns the root of
- * the balanced tree. The resulting tree is <i>route balanced</i>
- * not <i>perfectly balanced</i>. This makes no difference to the
- * average tree search time which is the same in both cases, O(log2(n)).
- *
- * @return root of the balanced tree or NULL if there's no memory left
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-MacTreeNode* ixEthDBTreeRebalance(MacTreeNode *searchTree)
-{
-    MacTreeNode *pseudoRoot = ixEthDBAllocMacTreeNode();
-    UINT32 size;
-
-    if (pseudoRoot == NULL)
-    {
-        /* out of memory */
-        return NULL;
-    }
-
-    pseudoRoot->right = searchTree;
-
-    ixEthDBRebalanceTreeToVine(pseudoRoot, &size);
-    ixEthDBRebalanceVineToTree(pseudoRoot, size);
-
-    searchTree = pseudoRoot->right;
-
-    /* remove pseudoRoot right branch, otherwise it will free the entire tree */
-    pseudoRoot->right = NULL;
-
-    ixEthDBFreeMacTreeNode(pseudoRoot);
-
-    return searchTree;
-}
-
-/**
- * @brief converts a tree into a vine
- *
- * @param root root of tree to convert
- * @param size depth of vine (equal to the number of nodes in the tree)
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBRebalanceTreeToVine(MacTreeNode *root, UINT32 *size)
-{
-    MacTreeNode *vineTail  = root;
-    MacTreeNode *remainder = vineTail->right;
-    MacTreeNode *tempPtr;
-
-    *size = 0;
-
-    while (remainder != NULL)
-    {
-        if (remainder->left == NULL)
-        {
-            /* move tail down one */
-            vineTail  = remainder;
-            remainder = remainder->right;
-            (*size)++;
-        }
-        else
-        {
-            /* rotate around remainder */
-            tempPtr         = remainder->left;
-            remainder->left = tempPtr->right;
-            tempPtr->right  = remainder;
-            remainder       = tempPtr;
-            vineTail->right = tempPtr;
-        }
-    }
-}
-
-/**
- * @brief converts a vine into a balanced tree
- *
- * @param root vine to convert
- * @param size depth of vine
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBRebalanceVineToTree(MacTreeNode *root, UINT32 size)
-{
-    UINT32 leafCount = size + 1 - (1 << ixEthDBRebalanceLog2Floor(size + 1));
-
-    ixEthDBRebalanceCompression(root, leafCount);
-
-    size = size - leafCount;
-
-    while (size > 1)
-    {
-        ixEthDBRebalanceCompression(root, size / 2);
-
-        size /= 2;
-    }
-}
-
-/**
- * @brief compresses a vine/tree stage into a more balanced vine/tree
- *
- * @param root root of the tree to compress
- * @param count number of "spine" nodes
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBRebalanceCompression(MacTreeNode *root, UINT32 count)
-{
-    MacTreeNode *scanner = root;
-    MacTreeNode *child;
-    UINT32 local_index;
-
-    for (local_index = 0 ; local_index < count ; local_index++)
-    {
-        child          = scanner->right;
-        scanner->right = child->right;
-        scanner        = scanner->right;
-        child->right   = scanner->left;
-        scanner->left  = child;
-    }
-}
-
-/**
- * @brief computes |_log2(x)_| (a.k.a. floor(log2(x)))
- *
- * @param x number to compute |_log2(x)_| for
- *
- * @return |_log2(x)_|
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-UINT32 ixEthDBRebalanceLog2Floor(UINT32 x)
-{
-    UINT32 log = 0;
-    UINT32 val = 1;
-
-    while (val < x)
-    {
-        log++;
-        val <<= 1;
-    }
-
-    return val == x ? log : log - 1;
-}
-
diff --git a/drivers/net/npe/IxEthDBReports.c b/drivers/net/npe/IxEthDBReports.c
deleted file mode 100644
index d74f121..0000000
--- a/drivers/net/npe/IxEthDBReports.c
+++ /dev/null
@@ -1,628 +0,0 @@
-/**
- * @file IxEthDBAPI.c
- *
- * @brief Implementation of the public API
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxEthDB_p.h"
-
-extern HashTable dbHashtable;
-IX_ETH_DB_PRIVATE void ixEthDBPortInfoShow(IxEthDBPortId portID, IxEthDBRecordType recordFilter);
-IX_ETH_DB_PRIVATE IxEthDBStatus ixEthDBHeaderShow(IxEthDBRecordType recordFilter);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBDependencyPortMapShow(IxEthDBPortId portID, IxEthDBPortMap map);
-
-/**
- * @brief displays a port dependency map
- *
- * @param portID ID of the port
- * @param map port map to display
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully
- */ 
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBDependencyPortMapShow(IxEthDBPortId portID, IxEthDBPortMap map)
-{
-    UINT32 portIndex;
-    BOOL mapSelf = true, mapNone = true, firstPort = true;
-    
-    /* dependency port maps */
-    printf("Dependency port map: ");
-    
-    /* browse the port map */
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        if (IS_PORT_INCLUDED(portIndex, map))
-        {
-            mapNone   = false;
-            
-            if (portIndex != portID)
-            {
-                mapSelf = false;
-            }
-            
-            printf("%s%d", firstPort ? "{" : ", ", portIndex);
-            
-            firstPort = false;
-        }
-    }
-    
-    if (mapNone)
-    {
-        mapSelf = false;
-    }
-    
-    printf("%s (%s)\n", firstPort ? "" : "}", mapSelf ? "self" : mapNone ? "none" : "group");
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief displays all the filtering records belonging to a port
- *
- * @param portID ID of the port to display
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @warning deprecated, use @ref ixEthDBFilteringDatabaseShowRecords() 
- * instead. Calling this function is equivalent to calling
- * ixEthDBFilteringDatabaseShowRecords(portID, IX_ETH_DB_FILTERING_RECORD)
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID)
-{
-    IxEthDBStatus local_result;
-    HashIterator iterator;
-    PortInfo *portInfo;
-    UINT32 recordCount = 0;
-
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    portInfo = &ixEthDBPortInfo[portID];
-
-    /* display table header */
-    printf("Ethernet database records for port ID [%d]\n", portID);
-    
-    ixEthDBDependencyPortMapShow(portID, portInfo->dependencyPortMap);
-    
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE)
-    {
-        printf("NPE updates are %s\n\n", portInfo->updateMethod.updateEnabled ? "enabled" : "disabled");
-    }
-    else
-    {
-        printf("updates disabled (not an NPE)\n\n");
-    }
-
-    printf("    MAC address    |   Age  | Type \n");
-    printf("___________________________________\n");
-
-    /* browse database */
-    BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator));
-
-    while (IS_ITERATOR_VALID(&iterator))
-    {
-      MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data;
-
-      if (descriptor->portID == portID && descriptor->type == IX_ETH_DB_FILTERING_RECORD)
-      {
-          recordCount++;
-
-          /* display entry */
-          printf(" %02X:%02X:%02X:%02X:%02X:%02X | %5d  | %s\n",
-              descriptor->macAddress[0],
-              descriptor->macAddress[1],
-              descriptor->macAddress[2],
-              descriptor->macAddress[3],
-              descriptor->macAddress[4],
-              descriptor->macAddress[5],
-              descriptor->recordData.filteringData.age,
-              descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic");
-      }
-
-      /* move to the next record */
-      BUSY_RETRY_WITH_RESULT(ixEthDBIncrementHashIterator(&dbHashtable, &iterator), local_result);
-
-      /* debug */
-      if (local_result == IX_ETH_DB_BUSY)
-      {
-          return IX_ETH_DB_FAIL;
-      }
-    }
-
-    /* display number of records */
-    printf("\nFound %d records\n", recordCount);
-
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief displays all the filtering records belonging to all the ports
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @warning deprecated, use @ref ixEthDBFilteringDatabaseShowRecords() 
- * instead. Calling this function is equivalent to calling
- * ixEthDBFilteringDatabaseShowRecords(IX_ETH_DB_ALL_PORTS, IX_ETH_DB_FILTERING_RECORD)
- */
-IX_ETH_DB_PUBLIC
-void ixEthDBFilteringDatabaseShowAll()
-{
-    IxEthDBPortId portIndex;
-
-    printf("\nEthernet learning/filtering database: listing %d ports\n\n", (UINT32) IX_ETH_DB_NUMBER_OF_PORTS);
-
-    for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++)
-    {
-        ixEthDBFilteringDatabaseShow(portIndex);
-
-        if (portIndex < IX_ETH_DB_NUMBER_OF_PORTS - 1)
-        {
-            printf("\n");
-        }
-    }
-}
-
-/**
- * @brief displays one record in a format depending on the record filter
- *
- * @param descriptor pointer to the record
- * @param recordFilter format filter
- *
- * This function will display the fields in a record depending on the
- * selected record filter.
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBRecordShow(MacDescriptor *descriptor, IxEthDBRecordType recordFilter)
-{
-    if (recordFilter == IX_ETH_DB_FILTERING_VLAN_RECORD
-        || recordFilter == (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD))
-    {
-        /* display VLAN record header - leave this commented code in place, its purpose is to align the print format with the header
-        printf("    MAC address    |   Age  |   Type   | VLAN ID | CFI | QoS class \n");
-        printf("___________________________________________________________________\n"); */
-
-        if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD)
-        {
-            printf("%02X:%02X:%02X:%02X:%02X:%02X | %3d | %s | %d | %d | %d\n",
-                descriptor->macAddress[0],
-                descriptor->macAddress[1],
-                descriptor->macAddress[2],
-                descriptor->macAddress[3],
-                descriptor->macAddress[4],
-                descriptor->macAddress[5],
-                descriptor->recordData.filteringVlanData.age,
-                descriptor->recordData.filteringVlanData.staticEntry ? "static" : "dynamic",
-                IX_ETH_DB_GET_VLAN_ID(descriptor->recordData.filteringVlanData.ieee802_1qTag),
-                (descriptor->recordData.filteringVlanData.ieee802_1qTag & 0x1000) >> 12,
-                IX_ETH_DB_GET_QOS_PRIORITY(descriptor->recordData.filteringVlanData.ieee802_1qTag));
-         }
-         else if (descriptor->type == IX_ETH_DB_FILTERING_RECORD)
-         {
-            printf("%02X:%02X:%02X:%02X:%02X:%02X | %3d | %s | - | - | -\n",
-                descriptor->macAddress[0],
-                descriptor->macAddress[1],
-                descriptor->macAddress[2],
-                descriptor->macAddress[3],
-                descriptor->macAddress[4],
-                descriptor->macAddress[5],
-                descriptor->recordData.filteringData.age,
-                descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic");
-         }
-    }
-    else if (recordFilter == IX_ETH_DB_FILTERING_RECORD)
-    {
-        /* display filtering record header - leave this commented code in place, its purpose is to align the print format with the header
-        printf("    MAC address    |   Age  |   Type   \n");
-        printf("_______________________________________\n");  */
-
-        if (descriptor->type == IX_ETH_DB_FILTERING_RECORD)
-        {
-         printf("%02X:%02X:%02X:%02X:%02X:%02X | %3d | %s \n",
-             descriptor->macAddress[0],
-             descriptor->macAddress[1],
-             descriptor->macAddress[2],
-             descriptor->macAddress[3],
-             descriptor->macAddress[4],
-             descriptor->macAddress[5],
-             descriptor->recordData.filteringData.age,
-             descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic");
-        }
-    }
-    else if (recordFilter == IX_ETH_DB_WIFI_RECORD)
-    {
-        /* display WiFi record header - leave this commented code in place, its purpose is to align the print format with the header 
-        printf("    MAC address    |   GW MAC address  \n");
-        printf("_______________________________________\n"); */
-
-        if (descriptor->type == IX_ETH_DB_WIFI_RECORD)
-        {
-            if (descriptor->recordData.wifiData.type == IX_ETH_DB_WIFI_AP_TO_AP)
-            {
-                /* gateway address present */
-                printf("%02X:%02X:%02X:%02X:%02X:%02X | %02X:%02X:%02X:%02X:%02X:%02X \n",
-                    descriptor->macAddress[0],
-                    descriptor->macAddress[1],
-                    descriptor->macAddress[2],
-                    descriptor->macAddress[3],
-                    descriptor->macAddress[4],
-                    descriptor->macAddress[5],
-                    descriptor->recordData.wifiData.gwMacAddress[0],
-                    descriptor->recordData.wifiData.gwMacAddress[1],
-                    descriptor->recordData.wifiData.gwMacAddress[2],
-                    descriptor->recordData.wifiData.gwMacAddress[3],
-                    descriptor->recordData.wifiData.gwMacAddress[4],
-                    descriptor->recordData.wifiData.gwMacAddress[5]);
-            }
-            else
-            {
-                /* no gateway */
-                printf("%02X:%02X:%02X:%02X:%02X:%02X | ----no gateway----- \n",
-                    descriptor->macAddress[0],
-                    descriptor->macAddress[1],
-                    descriptor->macAddress[2],
-                    descriptor->macAddress[3],
-                    descriptor->macAddress[4],
-                    descriptor->macAddress[5]);
-            }
-        }
-    }
-    else if (recordFilter == IX_ETH_DB_FIREWALL_RECORD)
-    {
-        /* display Firewall record header - leave this commented code in place, its purpose is to align the print format with the header 
-        printf("    MAC address   \n");
-        printf("__________________\n"); */
-
-        if (descriptor->type == IX_ETH_DB_FIREWALL_RECORD)
-        {
-            printf("%02X:%02X:%02X:%02X:%02X:%02X \n",
-                descriptor->macAddress[0],
-                descriptor->macAddress[1],
-                descriptor->macAddress[2],
-                descriptor->macAddress[3],
-                descriptor->macAddress[4],
-                descriptor->macAddress[5]);
-        }
-    }
-    else if (recordFilter == IX_ETH_DB_ALL_RECORD_TYPES)
-    {
-        /* display composite record header - leave this commented code in place, its purpose is to align the print format with the header 
-        printf("    MAC address   | Record | Age|  Type   | VLAN |CFI| QoS |  GW MAC address   \n");
-        printf("_______________________________________________________________________________\n"); */
-
-        if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD)
-        {
-            printf("%02X:%02X:%02X:%02X:%02X:%02X |  VLAN  | %2d | %s | %4d | %1d |  %1d  | -----------------\n",
-                descriptor->macAddress[0],
-                descriptor->macAddress[1],
-                descriptor->macAddress[2],
-                descriptor->macAddress[3],
-                descriptor->macAddress[4],
-                descriptor->macAddress[5],
-                descriptor->recordData.filteringVlanData.age,
-                descriptor->recordData.filteringVlanData.staticEntry ? "static " : "dynamic",
-                IX_ETH_DB_GET_VLAN_ID(descriptor->recordData.filteringVlanData.ieee802_1qTag),
-                (descriptor->recordData.filteringVlanData.ieee802_1qTag & 0x1000) >> 12,
-                IX_ETH_DB_GET_QOS_PRIORITY(descriptor->recordData.filteringVlanData.ieee802_1qTag));
-         }
-         else if (descriptor->type == IX_ETH_DB_FILTERING_RECORD)
-         {
-            printf("%02X:%02X:%02X:%02X:%02X:%02X | Filter | %2d | %s | ---- | - | --- | -----------------\n",
-                descriptor->macAddress[0],
-                descriptor->macAddress[1],
-                descriptor->macAddress[2],
-                descriptor->macAddress[3],
-                descriptor->macAddress[4],
-                descriptor->macAddress[5],
-                descriptor->recordData.filteringData.age,
-                descriptor->recordData.filteringData.staticEntry ? "static " : "dynamic");
-         }
-        else if (descriptor->type == IX_ETH_DB_WIFI_RECORD)
-        {
-            if (descriptor->recordData.wifiData.type == IX_ETH_DB_WIFI_AP_TO_AP)
-            {
-                /* gateway address present */
-                printf("%02X:%02X:%02X:%02X:%02X:%02X |  WiFi  | -- | AP=>AP  | ---- | - | --- | %02X:%02X:%02X:%02X:%02X:%02X\n",
-                    descriptor->macAddress[0],
-                    descriptor->macAddress[1],
-                    descriptor->macAddress[2],
-                    descriptor->macAddress[3],
-                    descriptor->macAddress[4],
-                    descriptor->macAddress[5],
-                    descriptor->recordData.wifiData.gwMacAddress[0],
-                    descriptor->recordData.wifiData.gwMacAddress[1],
-                    descriptor->recordData.wifiData.gwMacAddress[2],
-                    descriptor->recordData.wifiData.gwMacAddress[3],
-                    descriptor->recordData.wifiData.gwMacAddress[4],
-                    descriptor->recordData.wifiData.gwMacAddress[5]);
-            }
-            else
-            {
-                /* no gateway */
-                printf("%02X:%02X:%02X:%02X:%02X:%02X |  WiFi  | -- | AP=>ST  | ---- | - | --- | -- no gateway -- \n",
-                    descriptor->macAddress[0],
-                    descriptor->macAddress[1],
-                    descriptor->macAddress[2],
-                    descriptor->macAddress[3],
-                    descriptor->macAddress[4],
-                    descriptor->macAddress[5]);
-            }
-        }
-        else if (descriptor->type == IX_ETH_DB_FIREWALL_RECORD)
-        {
-            printf("%02X:%02X:%02X:%02X:%02X:%02X |   FW   | -- | ------- | ---- | - | --- | -----------------\n",
-                descriptor->macAddress[0],
-                descriptor->macAddress[1],
-                descriptor->macAddress[2],
-                descriptor->macAddress[3],
-                descriptor->macAddress[4],
-                descriptor->macAddress[5]);
-        }
-    }
-    else
-    {
-        printf("invalid record filter\n");
-    }
-}
-
-/**
- * @brief displays the status, records and configuration information of a port
- *
- * @param portID ID of the port
- * @param recordFilter record filter to display
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBPortInfoShow(IxEthDBPortId portID, IxEthDBRecordType recordFilter)
-{
-    PortInfo *portInfo = &ixEthDBPortInfo[portID];
-    UINT32 recordCount = 0;
-    HashIterator iterator;
-    IxEthDBStatus local_result;
-
-    /* display port status */
-    printf("== Port ID %d ==\n", portID);
-
-    /* display capabilities */
-    printf("- Capabilities: ");
-
-    if ((portInfo->featureCapability & IX_ETH_DB_LEARNING) != 0)
-    {
-        printf("Learning (%s) ", ((portInfo->featureStatus & IX_ETH_DB_LEARNING) != 0) ? "on" : "off");
-    }
-
-    if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0)
-    {
-        printf("VLAN/QoS (%s) ", ((portInfo->featureStatus & IX_ETH_DB_VLAN_QOS) != 0) ? "on" : "off");
-    }
-
-    if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0)
-    {
-        printf("Firewall (%s) ", ((portInfo->featureStatus & IX_ETH_DB_FIREWALL) != 0) ? "on" : "off");
-    }
-
-    if ((portInfo->featureCapability & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0)
-    {
-        printf("WiFi (%s) ", ((portInfo->featureStatus & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) ? "on" : "off");
-    }
-
-    if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0)
-    {
-        printf("STP (%s) ", ((portInfo->featureStatus & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0) ? "on" : "off");
-    }
-
-    printf("\n");
-
-    /* dependency map */
-    ixEthDBDependencyPortMapShow(portID, portInfo->dependencyPortMap);
-
-    /* NPE dynamic updates */
-    if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) 
-    {
-        printf(" - NPE dynamic update is %s\n", portInfo->updateMethod.updateEnabled ? "enabled" : "disabled");
-    }
-    else
-    {
-        printf(" - dynamic update disabled (not an NPE)\n");
-    }
-
-    if ((portInfo->featureCapability & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0)
-    {
-        if ((portInfo->featureStatus & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0)
-        {
-            /* WiFi header conversion */
-            if ((portInfo->frameControlDurationID 
-                + portInfo->bbsid[0] 
-                + portInfo->bbsid[1] 
-                + portInfo->bbsid[2] 
-                + portInfo->bbsid[3] 
-                + portInfo->bbsid[4] 
-                + portInfo->bbsid[5]) == 0)
-            {
-                printf(" - WiFi header conversion not configured\n");
-            }
-            else
-            {  
-                printf(" - WiFi header conversion: BBSID [%02X:%02X:%02X:%02X:%02X:%02X], Frame Control 0x%X, Duration/ID 0x%X\n", 
-                    portInfo->bbsid[0],
-                    portInfo->bbsid[1],
-                    portInfo->bbsid[2],
-                    portInfo->bbsid[3],
-                    portInfo->bbsid[4],
-                    portInfo->bbsid[5],
-                    portInfo->frameControlDurationID >> 16,
-                    portInfo->frameControlDurationID & 0xFFFF);
-            }
-        }
-        else
-        {
-            printf(" - WiFi header conversion not enabled\n");
-        }
-    }
-
-    /* Firewall */
-    if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0)
-    {
-        if ((portInfo->featureStatus & IX_ETH_DB_FIREWALL) != 0)
-        {
-            printf(" - Firewall is in %s-list mode\n", portInfo->firewallMode == IX_ETH_DB_FIREWALL_BLACK_LIST ? "black" : "white");
-            printf(" - Invalid source MAC address filtering is %s\n", portInfo->srcAddressFilterEnabled ? "enabled" : "disabled");
-        }
-        else
-        {
-            printf(" - Firewall not enabled\n");
-        }
-    }
-  
-    /* browse database if asked to display records */
-    if (recordFilter != IX_ETH_DB_NO_RECORD_TYPE)
-    {
-        printf("\n");
-        ixEthDBHeaderShow(recordFilter);
-
-        BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator));
-
-        while (IS_ITERATOR_VALID(&iterator))
-        {
-            MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data;
-
-            if (descriptor->portID == portID && (descriptor->type & recordFilter) != 0)
-            {
-                recordCount++;
-
-                /* display entry */
-                ixEthDBRecordShow(descriptor, recordFilter);
-            }
-
-            /* move to the next record */
-            BUSY_RETRY_WITH_RESULT(ixEthDBIncrementHashIterator(&dbHashtable, &iterator), local_result);
-
-            /* debug */
-            if (local_result == IX_ETH_DB_BUSY)
-            {
-                printf("EthDB (API): Error, database browser failed (no access), giving up\n");
-            }
-        }
-        
-        printf("\nFound %d records\n\n", recordCount);
-    }
-}
-
-/**
- * @brief displays a record header
- *
- * @param recordFilter record type filter
- *
- * This function displays a record header, depending on
- * the given record type filter. It is useful when used
- * in conjunction with ixEthDBRecordShow which will display
- * record fields formatted for the header, provided the same
- * record filter is used.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or IX_ETH_DB_INVALID_ARG if the recordFilter
- * parameter is invalid or not supported
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-IxEthDBStatus ixEthDBHeaderShow(IxEthDBRecordType recordFilter)
-{
-  if (recordFilter == IX_ETH_DB_FILTERING_VLAN_RECORD
-      || recordFilter == (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD))
-  {
-    /* display VLAN record header */
-    printf("    MAC address    |   Age  |   Type   | VLAN ID | CFI | QoS class \n");
-    printf("___________________________________________________________________\n");
-  }
-  else if (recordFilter == IX_ETH_DB_FILTERING_RECORD)
-  {
-    /* display filtering record header */
-    printf("    MAC address    |   Age  |   Type   \n");
-    printf("_______________________________________\n");
-  }
-  else if (recordFilter == IX_ETH_DB_WIFI_RECORD)
-  {
-    /* display WiFi record header */
-    printf("    MAC address    |   GW MAC address  \n");
-    printf("_______________________________________\n");
-  }
-  else if (recordFilter == IX_ETH_DB_FIREWALL_RECORD)
-  {
-    /* display Firewall record header */
-    printf("    MAC address   \n");
-    printf("__________________\n");
-  }
-  else if (recordFilter == IX_ETH_DB_ALL_RECORD_TYPES)
-  {
-    /* display composite record header */
-    printf("    MAC address   | Record | Age|  Type   | VLAN |CFI| QoS |  GW MAC address   \n");
-    printf("_______________________________________________________________________________\n");
-  }
-  else
-  {
-    return IX_ETH_DB_INVALID_ARG;
-  }
-  
-  return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief displays database information (records and port information)
- *
- * @param portID ID of the port to display (or IX_ETH_DB_ALL_PORTS for all the ports)
- * @param recordFilter record filter (use IX_ETH_DB_NO_RECORD_TYPE to display only
- * port information)
- * 
- * Note that this function is documented in the main component header
- * file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully or
- * an appropriate error code otherwise
- * 
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter)
-{
-  IxEthDBPortId currentPort;
-  BOOL showAllPorts = (portID == IX_ETH_DB_ALL_PORTS);
-  
-  IX_ETH_DB_CHECK_PORT_ALL(portID);
-
-  printf("\nEthernet learning/filtering database: listing %d port(s)\n\n", showAllPorts ? (UINT32) IX_ETH_DB_NUMBER_OF_PORTS : 1);
-  
-  currentPort = showAllPorts ? 0 : portID;
-  
-  while (currentPort != IX_ETH_DB_NUMBER_OF_PORTS)
-  {
-    /* display port info */
-    ixEthDBPortInfoShow(currentPort, recordFilter);
-    
-    /* next port */
-    currentPort = showAllPorts ? currentPort + 1 : IX_ETH_DB_NUMBER_OF_PORTS;
-  }
-  
-  return IX_ETH_DB_SUCCESS;
-}
-
diff --git a/drivers/net/npe/IxEthDBSearch.c b/drivers/net/npe/IxEthDBSearch.c
deleted file mode 100644
index 4fd28da..0000000
--- a/drivers/net/npe/IxEthDBSearch.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/**
- * @file IxEthDBSearch.c
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxEthDB_p.h"
-
-extern HashTable dbHashtable;
-
-/**
- * @brief matches two database records based on their MAC addresses
- *
- * @param untypedReference record to match against
- * @param untypedEntry record to match
- *
- * @return true if the match is successful or false otherwise
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-BOOL ixEthDBAddressRecordMatch(void *untypedReference, void *untypedEntry)
-{
-    MacDescriptor *entry     = (MacDescriptor *) untypedEntry;
-    MacDescriptor *reference = (MacDescriptor *) untypedReference;
-    
-    /* check accepted record types */
-    if ((entry->type & reference->type) == 0) return false;
-       
-    return (ixEthDBAddressCompare((UINT8 *) entry->macAddress, (UINT8 *) reference->macAddress) == 0);
-}
-
-/**
- * @brief matches two database records based on their MAC addresses
- * and VLAN IDs
- *
- * @param untypedReference record to match against
- * @param untypedEntry record to match
- *
- * @return true if the match is successful or false otherwise
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-BOOL ixEthDBVlanRecordMatch(void *untypedReference, void *untypedEntry)
-{
-    MacDescriptor *entry     = (MacDescriptor *) untypedEntry;
-    MacDescriptor *reference = (MacDescriptor *) untypedReference;
-    
-    /* check accepted record types */
-    if ((entry->type & reference->type) == 0) return false;
-    
-    return (IX_ETH_DB_GET_VLAN_ID(entry->recordData.filteringVlanData.ieee802_1qTag) ==
-        IX_ETH_DB_GET_VLAN_ID(reference->recordData.filteringVlanData.ieee802_1qTag)) &&
-        (ixEthDBAddressCompare(entry->macAddress, reference->macAddress) == 0);
-}
-
-/**
- * @brief matches two database records based on their MAC addresses
- * and port IDs
- *
- * @param untypedReference record to match against
- * @param untypedEntry record to match
- *
- * @return true if the match is successful or false otherwise
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-BOOL ixEthDBPortRecordMatch(void *untypedReference, void *untypedEntry)
-{
-    MacDescriptor *entry     = (MacDescriptor *) untypedEntry;
-    MacDescriptor *reference = (MacDescriptor *) untypedReference;
-    
-    /* check accepted record types */
-    if ((entry->type & reference->type) == 0) return false;
-    
-    return (entry->portID == reference->portID) &&
-        (ixEthDBAddressCompare(entry->macAddress, reference->macAddress) == 0);
-}
-
-/**
- * @brief dummy matching function, registered for safety
- *
- * @param reference record to match against (unused)
- * @param entry record to match (unused)
- *
- * This function is registered in the matching functions
- * array on invalid types. Calling it will display an 
- * error message, indicating an error in the component logic.
- *
- * @return false
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-BOOL ixEthDBNullMatch(void *reference, void *entry)
-{
-    /* display an error message */
-
-    ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, "DB: (Search) The NullMatch function was called, wrong key type?\n", 0, 0, 0, 0, 0, 0);
-
-
-    return false;
-}
-
-/**
- * @brief registers hash matching methods
- *
- * @param matchFunctions table of match functions to be populated
- *
- * This function registers the available record matching functions
- * by indexing them on record types into the given function array.
- * 
- * Note that it is compulsory to call this in ixEthDBInit(), 
- * otherwise hashtable searching and removal will not work
- *
- * @return number of registered functions
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-UINT32 ixEthDBMatchMethodsRegister(MatchFunction *matchFunctions)
-{
-    UINT32 i;
-    
-    /* safety first */
-    for ( i = 0 ; i < IX_ETH_DB_MAX_KEY_INDEX + 1 ; i++)
-    {
-        matchFunctions[i] = ixEthDBNullMatch;
-    }
-    
-    /* register MAC search method */
-    matchFunctions[IX_ETH_DB_MAC_KEY] = ixEthDBAddressRecordMatch;
-    
-    /* register MAC/PortID search method */
-    matchFunctions[IX_ETH_DB_MAC_PORT_KEY] = ixEthDBPortRecordMatch;
-    
-    /* register MAC/VLAN ID search method */
-    matchFunctions[IX_ETH_DB_MAC_VLAN_KEY] = ixEthDBVlanRecordMatch;
-    
-    return 3; /* three methods */
-}
-
-/**
- * @brief search a record in the Ethernet datbase
- *
- * @param macAddress MAC address to perform the search on
- * @param typeFilter type of records to consider for matching
- *
- * @warning if searching is successful an implicit write lock
- * to the search result is granted, therefore unlock the 
- * entry using @ref ixEthDBReleaseHashNode() as soon as possible.
- *
- * @see ixEthDBReleaseHashNode()
- *
- * @return the search result, or NULL if a record with the given
- * MAC address was not found
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-HashNode* ixEthDBSearch(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter)
-{
-    HashNode *searchResult = NULL;
-    MacDescriptor reference;
-    
-    TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER;
-
-    if (macAddress == NULL)
-    {
-        return NULL;
-    }
-
-    /* fill search fields */
-    memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr));
-    
-    /* set acceptable record types */
-    reference.type = typeFilter;
-    
-    BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, IX_ETH_DB_MAC_KEY, &reference, &searchResult));
-
-    return searchResult;
-}
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPeek(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter)
-{
-    MacDescriptor reference;
-    IxEthDBStatus result;
-    
-    TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER;
-
-    if (macAddress == NULL)
-    {
-        return IX_ETH_DB_INVALID_ARG;
-    }
-
-    /* fill search fields */
-    memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr));
-    
-    /* set acceptable record types */
-    reference.type = typeFilter;
-    
-    result = ixEthDBPeekHashEntry(&dbHashtable, IX_ETH_DB_MAC_KEY, &reference);
-
-    return result;
-}
-
-/**
- * @brief search a record in the Ethernet datbase
- *
- * @param macAddress MAC address to perform the search on
- * @param portID port ID to perform the search on
- * @param typeFilter type of records to consider for matching
- *
- * @warning if searching is successful an implicit write lock
- * to the search result is granted, therefore unlock the 
- * entry using @ref ixEthDBReleaseHashNode() as soon as possible.
- *
- * @see ixEthDBReleaseHashNode()
- *
- * @return the search result, or NULL if a record with the given
- * MAC address/port ID combination was not found
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-HashNode* ixEthDBPortSearch(IxEthDBMacAddr *macAddress, IxEthDBPortId portID, IxEthDBRecordType typeFilter)
-{
-    HashNode *searchResult = NULL;
-    MacDescriptor reference;
-    
-    if (macAddress == NULL)
-    {
-        return NULL;
-    }
-    
-    /* fill search fields */
-    memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr));
-    reference.portID = portID;
-    
-    /* set acceptable record types */
-    reference.type = typeFilter;
-
-    BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, IX_ETH_DB_MAC_PORT_KEY, &reference, &searchResult));
-
-    return searchResult;
-}
-
-/**
- * @brief search a record in the Ethernet datbase
- *
- * @param macAddress MAC address to perform the search on
- * @param vlanID VLAN ID to perform the search on
- * @param typeFilter type of records to consider for matching
- *
- * @warning if searching is successful an implicit write lock
- * to the search result is granted, therefore unlock the 
- * entry using @ref ixEthDBReleaseHashNode() as soon as possible.
- *
- * @see ixEthDBReleaseHashNode()
- *
- * @return the search result, or NULL if a record with the given
- * MAC address/VLAN ID combination was not found
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-HashNode* ixEthDBVlanSearch(IxEthDBMacAddr *macAddress, IxEthDBVlanId vlanID, IxEthDBRecordType typeFilter)
-{
-    HashNode *searchResult = NULL;
-    MacDescriptor reference;
-    
-    if (macAddress == NULL)
-    {
-        return NULL;
-    }
-    
-    /* fill search fields */
-    memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr));
-    reference.recordData.filteringVlanData.ieee802_1qTag = 
-            IX_ETH_DB_SET_VLAN_ID(reference.recordData.filteringVlanData.ieee802_1qTag, vlanID);
-    
-    /* set acceptable record types */
-    reference.type = typeFilter;
-
-    BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, IX_ETH_DB_MAC_VLAN_KEY, &reference, &searchResult));
-
-    return searchResult;
-}
diff --git a/drivers/net/npe/IxEthDBSpanningTree.c b/drivers/net/npe/IxEthDBSpanningTree.c
deleted file mode 100644
index e12be0d..0000000
--- a/drivers/net/npe/IxEthDBSpanningTree.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/**
- * @file IxEthDBSpanningTree.c
- *
- * @brief Implementation of the STP API
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-#include "IxEthDB_p.h"
-
-/**
- * @brief sets the STP blocking state of a port
- *
- * @param portID ID of the port
- * @param blocked true to block the port or false to unblock it
- * 
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked)
-{
-    IxNpeMhMessage message;
-    IX_STATUS result;
-    
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
- 
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_SPANNING_TREE_PROTOCOL);
-    
-    ixEthDBPortInfo[portID].stpBlocked = blocked;
-
-    FILL_SETBLOCKINGSTATE_MSG(message, portID, blocked);
-    
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-    
-    return result;
-}
-
-/**
- * @brief retrieves the STP blocking state of a port
- *
- * @param portID ID of the port
- * @param blocked address to write the blocked status into
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
- 
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_SPANNING_TREE_PROTOCOL);
-    
-    IX_ETH_DB_CHECK_REFERENCE(blocked);
-    
-    *blocked = ixEthDBPortInfo[portID].stpBlocked;
-    
-    return IX_ETH_DB_SUCCESS;
-}
diff --git a/drivers/net/npe/IxEthDBUtil.c b/drivers/net/npe/IxEthDBUtil.c
deleted file mode 100644
index 40d4470..0000000
--- a/drivers/net/npe/IxEthDBUtil.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/**
- * @file ethUtil.c
- *
- * @brief Utility functions
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-#include "IxFeatureCtrl.h"
-#include "IxEthDB_p.h"
-
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBSingleEthNpeCheck(IxEthDBPortId portID)
-{
-    /* If not IXP42X A0 stepping, proceed to check for existence of coprocessors */ 
-    if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != 
-        (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-        || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-    {  
-        if ((portID == 0) && 
-            (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) ==
-             IX_FEATURE_CTRL_COMPONENT_DISABLED))
-        {
-	    return IX_ETH_DB_FAIL;
-        }
-
-        if ((portID == 1) &&
-            (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) ==
-             IX_FEATURE_CTRL_COMPONENT_DISABLED))
-        {
-	    return IX_ETH_DB_FAIL;	    
-        }
-
-        if ((portID == 2) &&
-            (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA_ETH) ==
-             IX_FEATURE_CTRL_COMPONENT_DISABLED))
-        {
-	    return IX_ETH_DB_FAIL;	    
-        }
-    }
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-IX_ETH_DB_PUBLIC
-BOOL ixEthDBCheckSingleBitValue(UINT32 value)
-{
-#if (CPU != SIMSPARCSOLARIS) && !defined (__wince)
-    UINT32 shift;
-    
-    /* use the count-leading-zeros XScale instruction */
-    __asm__ ("clz %0, %1\n" : "=r" (shift) : "r" (value));
-    
-    return ((value << shift) == 0x80000000UL);
-    
-#else
-	
-    while (value != 0)
-    {
-        if (value == 1) return true;
-        else if ((value & 1) == 1) return false;
-
-        value >>= 1;
-    }
-    
-    return false;
-
-#endif
-}
-
-const char *mac2string(const unsigned char *mac)
-{
-  static char str[19];
-  
-  if (mac == NULL)
-  {
-    return NULL;
-  }  
-
-  sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-
-  return str;
-}
diff --git a/drivers/net/npe/IxEthDBVlan.c b/drivers/net/npe/IxEthDBVlan.c
deleted file mode 100644
index 483e348..0000000
--- a/drivers/net/npe/IxEthDBVlan.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/**
- * @file IxEthDBVlan.c
- *
- * @brief Implementation of the VLAN API
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxEthDB.h"
-#include "IxEthDB_p.h"
-
-/* forward prototypes */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBUpdateTrafficClass(IxEthDBPortId portID, UINT32 classIndex);
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBVlanTableGet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet);
-
-/* contants used by various functions as "action" parameter */
-#define ADD_VLAN    (0x1)
-#define REMOVE_VLAN (0x2)
-
-/**
- * @brief adds or removes a VLAN from a VLAN set
- *
- * @param vlanID VLAN ID to add or remove
- * @param table VLAN set to add into or remove from
- * @param action ADD_VLAN or REMOVE_VLAN
- * 
- * @internal
- */
-IX_ETH_DB_PRIVATE
-void ixEthDBLocalVlanMembershipChange(UINT32 vlanID, IxEthDBVlanSet table, UINT32 action)
-{
-    UINT32 setOffset;
-    
-    /* add/remove VID to membership table */
-    setOffset = VLAN_SET_OFFSET(vlanID); /* we need 9 bits to index the 512 byte membership array */
-
-    if (action == ADD_VLAN)
-    {
-        table[setOffset] |= 1 << VLAN_SET_MASK(vlanID);
-    }
-    else if (action == REMOVE_VLAN)
-    {
-        table[setOffset] &= ~(1 << VLAN_SET_MASK(vlanID));
-    }
-}
-
-/**
- * @brief updates a set of 8 VLANs in an NPE
- *
- * @param portID ID of the port
- * @param setOffset offset of the 8 VLANs
- *
- * This function updates the VLAN membership table
- * and Transmit Tagging Info table for 8 consecutive
- * VLAN IDs indexed by setOffset.
- *
- * For example, a setOffset of 0 indexes VLAN IDs 0
- * through 7, 1 indexes VLAN IDs 8 through 9 etc.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-IxEthDBStatus ixEthDBVlanTableEntryUpdate(IxEthDBPortId portID, UINT32 setOffset)
-{
-    PortInfo *portInfo = &ixEthDBPortInfo[portID];
-    IxNpeMhMessage message;
-    IX_STATUS result;
-        
-    FILL_SETPORTVLANTABLEENTRY_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), 
-        2 * setOffset, 
-        portInfo->vlanMembership[setOffset], 
-        portInfo->transmitTaggingInfo[setOffset]);
-    
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-    
-    return result;
-}
-
-/**
- * @brief updates a VLAN range in an NPE
- *
- * @param portID ID of the port
- *
- * This function is similar to @ref ixEthDBVlanTableEntryUpdate
- * except that it can update more than one VLAN set (up to
- * the entire VLAN membership and TTI tables if the offset is 0
- * and length is sizeof (IxEthDBVlanSet) (512 bytes).
- *
- * Updating the NPE via this method is slower as it requires
- * a memory copy from SDRAM, hence it is recommended that the
- * ixEthDBVlanTableEntryUpdate function is used where possible.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-IxEthDBStatus ixEthDBVlanTableRangeUpdate(IxEthDBPortId portID)
-{
-    PortInfo *portInfo    = &ixEthDBPortInfo[portID];
-    UINT8 *vlanUpdateZone = (UINT8 *) portInfo->updateMethod.vlanUpdateZone;
-    IxNpeMhMessage message;
-    UINT32 setIndex;
-    IX_STATUS result;
-
-    /* copy membership info and transmit tagging into into exchange area */
-    for (setIndex = 0 ; setIndex < sizeof (portInfo->vlanMembership) ; setIndex++)
-    {
-        /* membership and TTI data are interleaved */
-        vlanUpdateZone[setIndex * 2]     = portInfo->vlanMembership[setIndex];
-        vlanUpdateZone[setIndex * 2 + 1] = portInfo->transmitTaggingInfo[setIndex];
-    }
-
-    IX_OSAL_CACHE_FLUSH(vlanUpdateZone, FULL_VLAN_BYTE_SIZE);
-    
-    /* build NPE message */
-    FILL_SETPORTVLANTABLERANGE_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), 0, 0, 
-        IX_OSAL_MMU_VIRT_TO_PHYS(vlanUpdateZone));
-
-    /* send message */    
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-
-    return result;
-}
-
-/**
- * @brief adds or removes a VLAN from a port's VLAN membership table
- * or Transmit Tagging Information table
- *
- * @param portID ID of the port
- * @param vlanID VLAN ID to add or remove
- * @param table to add or remove from
- * @param action ADD_VLAN or REMOVE_VLAN
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-IxEthDBStatus ixEthDBPortVlanMembershipChange(IxEthDBPortId portID, IxEthDBVlanId vlanID, IxEthDBVlanSet table, UINT32 action)
-{
-    /* change VLAN in local membership table */
-    ixEthDBLocalVlanMembershipChange(vlanID, table, action);
-    
-    /* send updated entry to NPE */
-    return ixEthDBVlanTableEntryUpdate(portID, VLAN_SET_OFFSET(vlanID));
-}
-
-/**
- * @brief sets the default port VLAN tag (the lower 3 bytes are the PVID)
- *
- * @param portID ID of the port
- * @param vlanTag port VLAN tag (802.1Q tag)
- * 
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag)
-{
-    IxNpeMhMessage message;
-    IX_STATUS result;
-    
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
- 
-    IX_ETH_DB_CHECK_VLAN_TAG(vlanTag);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-        
-    /* add VLAN ID to local membership table */
-    ixEthDBPortVlanMembershipChange(portID, 
-        vlanTag & IX_ETH_DB_802_1Q_VLAN_MASK, 
-        ixEthDBPortInfo[portID].vlanMembership, 
-        ADD_VLAN);
-        
-    /* set tag in portInfo */
-    ixEthDBPortInfo[portID].vlanTag = vlanTag;
-    
-    /* build VLAN_SetDefaultRxVID message */
-    FILL_SETDEFAULTRXVID_MSG(message, 
-        IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), 
-        IX_IEEE802_1Q_VLAN_TPID, 
-        vlanTag);
-    
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-    
-    return result;
-}
-
-/**
- * @brief retrieves the default port VLAN tag (the lower 3 bytes are the PVID)
- *
- * @param portID ID of the port
- * @param vlanTag address to write the port VLAN tag (802.1Q tag) into
- * 
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    IX_ETH_DB_CHECK_REFERENCE(vlanTag);
-    
-    *vlanTag = ixEthDBPortInfo[portID].vlanTag;
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief sets the VLAN tag (the lower 3 bytes are the PVID) of a 
- * database filtering record
- *
- * @param portID ID of the port
- * @param vlanTag VLAN tag (802.1Q tag)
- * 
- * Important: filtering records are automatically converted to 
- * IX_ETH_DB_FILTERING_VLAN record when added a VLAN tag.
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag)
-{
-    HashNode *searchResult;
-    MacDescriptor *descriptor;
-    
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-    
-    IX_ETH_DB_CHECK_VLAN_TAG(vlanTag);
-    
-    searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS);
-    
-    if (searchResult == NULL)
-    {
-        return IX_ETH_DB_NO_SUCH_ADDR;
-    }
-    
-    descriptor = (MacDescriptor *) searchResult->data;
-    
-    /* set record type to VLAN if not already set */
-    descriptor->type = IX_ETH_DB_FILTERING_VLAN_RECORD;
-    
-    /* add vlan tag */
-    descriptor->recordData.filteringVlanData.ieee802_1qTag = vlanTag;
-    
-    /* transaction completed */
-    ixEthDBReleaseHashNode(searchResult);
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief retrieves the VLAN tag (the lower 3 bytes are the PVID) from a 
- * database VLAN filtering record
- *
- * @param portID ID of the port
- * @param vlanTag address to write the VLAN tag (802.1Q tag) into
- * 
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag)
-{
-    HashNode *searchResult;
-    MacDescriptor *descriptor;
-    
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-    
-    IX_ETH_DB_CHECK_REFERENCE(vlanTag);
-    
-    searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_FILTERING_VLAN_RECORD);
-    
-    if (searchResult == NULL)
-    {
-        return IX_ETH_DB_NO_SUCH_ADDR;
-    }
-    
-    descriptor = (MacDescriptor *) searchResult->data;
-        
-    /* get vlan tag */
-    *vlanTag = descriptor->recordData.filteringVlanData.ieee802_1qTag;
-    
-    /* transaction completed */
-    ixEthDBReleaseHashNode(searchResult);
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief adds a VLAN to a port's VLAN membership table
- *
- * @param portID ID of the port
- * @param vlanID VLAN ID to add
- * 
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_VLAN_ID(vlanID);
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-
-    return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].vlanMembership, ADD_VLAN);
-}
-
-/**
- * @brief removes a VLAN from a port's VLAN membership table
- *
- * @param portID ID of the port
- * @param vlanID VLAN ID to remove
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-
-    IX_ETH_DB_CHECK_VLAN_ID(vlanID);
-
-    /* for safety isolate only the VLAN ID in the tag (the lower 12 bits) */
-    vlanID = vlanID & IX_ETH_DB_802_1Q_VLAN_MASK;
-    
-    /* check we're not asked to remove the default port VID */
-    if (vlanID == IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag))
-    {
-        return IX_ETH_DB_NO_PERMISSION;
-    }
-    
-    return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].vlanMembership, REMOVE_VLAN);
-}
-
-/**
- * @brief adds or removes a VLAN range from a port's 
- * VLAN membership table or TTI table
- *
- * @param portID ID of the port
- * @param vlanIDMin start of the VLAN range
- * @param vlanIDMax end of the VLAN range
- * @param table VLAN set to add or remove from
- * @param action ADD_VLAN or REMOVE_VLAN
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-IxEthDBStatus ixEthDBPortVlanMembershipRangeChange(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, IxEthDBVlanSet table, UINT32 action)
-{
-    UINT32 setOffsetMin, setOffsetMax;
-    
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    IX_ETH_DB_CHECK_VLAN_ID(vlanIDMin);
-    
-    IX_ETH_DB_CHECK_VLAN_ID(vlanIDMax);
-    
-    /* for safety isolate only the VLAN ID in the tags (the lower 12 bits) */
-    vlanIDMin = vlanIDMin & IX_ETH_DB_802_1Q_VLAN_MASK;
-    vlanIDMax = vlanIDMax & IX_ETH_DB_802_1Q_VLAN_MASK;
-    
-    /* is this a range? */
-    if (vlanIDMax < vlanIDMin)
-    {
-        return IX_ETH_DB_INVALID_VLAN;
-    }
-    
-    /* check that we're not specifically asked to remove the default port VID */
-    if (action == REMOVE_VLAN && vlanIDMax == vlanIDMin && IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag) == vlanIDMin)
-    {
-        return IX_ETH_DB_NO_PERMISSION;
-    }
-    
-    /* compute set offsets */
-    setOffsetMin = VLAN_SET_OFFSET(vlanIDMin);
-    setOffsetMax = VLAN_SET_OFFSET(vlanIDMax);
-
-    /* change VLAN range */
-    for (; vlanIDMin <= vlanIDMax ; vlanIDMin++)
-    {
-        /* change vlan in local membership table */
-        ixEthDBLocalVlanMembershipChange(vlanIDMin, table, action);
-    }
-
-    /* if the range is within one set (max 8 VLANs in one table byte) we can just update that entry in the NPE */
-    if (setOffsetMin == setOffsetMax)
-    {
-        /* send updated entry to NPE */
-        return ixEthDBVlanTableEntryUpdate(portID, setOffsetMin);
-    }
-    else
-    {
-        /* update a zone of the membership/transmit tag info table */
-        return ixEthDBVlanTableRangeUpdate(portID);
-    }
-}
-
-/**
- * @brief adds a VLAN range to a port's VLAN membership table
- *
- * @param portID ID of the port
- * @param vlanIDMin start of the VLAN range
- * @param vlanIDMax end of the VLAN range
- * 
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].vlanMembership, ADD_VLAN);
-}
-
-/**
- * @brief removes a VLAN range from a port's VLAN membership table
- *
- * @param portID ID of the port
- * @param vlanIDMin start of the VLAN range
- * @param vlanIDMax end of the VLAN range
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].vlanMembership, REMOVE_VLAN);
-}
-
-/**
- * @brief sets a port's VLAN membership table or TTI table and
- * updates the NPE VLAN configuration
- *
- * @param portID ID of the port
- * @param portVlanTable port VLAN table to set
- * @param vlanSet new set contents
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortVlanTableSet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    IX_ETH_DB_CHECK_REFERENCE(vlanSet);
-
-    memcpy(portVlanTable, vlanSet, sizeof (IxEthDBVlanSet));
-    
-    return ixEthDBVlanTableRangeUpdate(portID);
-}
-
-/**
- * @brief retireves a port's VLAN membership table or TTI table
- *
- * @param portID ID of the port
- * @param portVlanTable port VLAN table to retrieve
- * @param vlanSet address to 
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBVlanTableGet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    IX_ETH_DB_CHECK_REFERENCE(vlanSet);
-    
-    memcpy(vlanSet, portVlanTable, sizeof (IxEthDBVlanSet));
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief sets a port's VLAN membership table
- *
- * @param portID ID of the port
- * @param vlanSet new VLAN membership table
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
-{
-    IxEthDBVlanId vlanID;
-
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_REFERENCE(vlanSet);
-
-    /* set the bit corresponding to the PVID just in case */
-    vlanID = IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag);
-    vlanSet[VLAN_SET_OFFSET(vlanID)] |= 1 << VLAN_SET_MASK(vlanID);
-    
-    return ixEthDBPortVlanTableSet(portID, ixEthDBPortInfo[portID].vlanMembership, vlanSet);
-}
-
-/**
- * @brief retrieves a port's VLAN membership table
- *
- * @param portID ID of the port
- * @param vlanSet location to store the port's VLAN membership table
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    return ixEthDBVlanTableGet(portID, ixEthDBPortInfo[portID].vlanMembership, vlanSet);
-}
-
-/**
- * @brief enables or disables Egress tagging for one VLAN ID
- *
- * @param portID ID of the port
- * @param vlanID VLAN ID to enable or disable Egress tagging on
- * @param enabled true to enable and false to disable tagging
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_VLAN_ID(vlanID);
-
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-
-    return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].transmitTaggingInfo, enabled? ADD_VLAN : REMOVE_VLAN);
-}
-
-/**
- * @brief retrieves the Egress tagging status for one VLAN ID
- *
- * @param portID ID of the port
- * @param vlanID VLAN ID to retrieve the tagging status for
- * @param enabled location to store the tagging status
- * (true - tagging enabled, false - tagging disabled)
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    IX_ETH_DB_CHECK_REFERENCE(enabled);
-
-    IX_ETH_DB_CHECK_VLAN_ID(vlanID);
-    
-    *enabled = ((ixEthDBPortInfo[portID].transmitTaggingInfo[VLAN_SET_OFFSET(vlanID)] & (1 << VLAN_SET_MASK(vlanID))) != 0);
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief enables or disables Egress VLAN tagging for a VLAN range
- *
- * @param portID ID of the port
- * @param vlanIDMin start of VLAN range
- * @param vlanIDMax end of VLAN range
- * @param enabled true to enable or false to disable VLAN tagging
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].transmitTaggingInfo, enabled? ADD_VLAN : REMOVE_VLAN);
-}
-
-/**
- * @brief sets the Egress VLAN tagging table (the Transmit Tagging
- * Information table)
- *
- * @param portID ID of the port
- * @param vlanSet new TTI table
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
-{
-    IxEthDBVlanId vlanID;
-
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_REFERENCE(vlanSet);
-
-    /* set the PVID bit just in case */
-    vlanID = IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag);
-    vlanSet[VLAN_SET_OFFSET(vlanID)] |= 1 << VLAN_SET_MASK(vlanID);
-    
-    return ixEthDBPortVlanTableSet(portID, ixEthDBPortInfo[portID].transmitTaggingInfo, vlanSet);
-}
-
-/**
- * @brief retrieves the Egress VLAN tagging table (the Transmit 
- * Tagging Information table)
- *
- * @param portID ID of the port
- * @param vlanSet location to store the port's TTI table
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    return ixEthDBVlanTableGet(portID, ixEthDBPortInfo[portID].transmitTaggingInfo, vlanSet);
-}
-
-/**
- * @brief sends the NPE the updated frame filter and default
- * Ingress tagging
- *
- * @param portID ID of the port
- * 
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-IxEthDBStatus ixEthDBIngressVlanModeUpdate(IxEthDBPortId portID)
-{
-    PortInfo *portInfo = &ixEthDBPortInfo[portID];
-    IxNpeMhMessage message;
-    IX_STATUS result;
-
-    FILL_SETRXTAGMODE_MSG(message, portID, portInfo->npeFrameFilter, portInfo->npeTaggingAction);
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-
-    return result;
-}
-
-/**
- * @brief sets the default Ingress tagging behavior
- *
- * @param portID ID of the port
- * @param taggingAction default tagging behavior
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction)
-{
-    PortInfo *portInfo;
-    
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    portInfo = &ixEthDBPortInfo[portID];
-    
-    if (taggingAction == IX_ETH_DB_PASS_THROUGH)
-    {
-        portInfo->npeTaggingAction = 0x00;
-    }
-    else if (taggingAction == IX_ETH_DB_ADD_TAG)
-    {
-        portInfo->npeTaggingAction = 0x02;
-    }
-    else if (taggingAction == IX_ETH_DB_REMOVE_TAG)
-    {
-        portInfo->npeTaggingAction = 0x01;
-    }
-    else
-    {
-        return IX_ETH_DB_INVALID_ARG;
-    }
-    
-    portInfo->taggingAction = taggingAction;
-    
-    return ixEthDBIngressVlanModeUpdate(portID);
-}
-
-/**
- * @brief retrieves the default Ingress tagging behavior of a port
- *
- * @param portID ID of the port
- * @param taggingAction location to save the default tagging behavior
- * 
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-
-    IX_ETH_DB_CHECK_REFERENCE(taggingAction);
-    
-    *taggingAction = ixEthDBPortInfo[portID].taggingAction;
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief sets the Ingress acceptable frame type filter
- *
- * @param portID ID of the port
- * @param frameFilter acceptable frame type filter
- * 
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter)
-{
-    PortInfo *portInfo;
-    IxEthDBStatus result = IX_ETH_DB_SUCCESS;
-        
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    /* check parameter range 
-       the ORed value of the valid values is 0x7
-       a value having extra bits is invalid */
-    if ((frameFilter | 0x7) != 0x7 || frameFilter == 0)
-    {
-        return IX_ETH_DB_INVALID_ARG;
-    }
-    
-    portInfo = &ixEthDBPortInfo[portID];
-    
-    portInfo->frameFilter    = frameFilter;
-    portInfo->npeFrameFilter = 0; /* allow all by default */
-    
-    /* if accepting priority tagged but not all VLAN tagged
-       set the membership table to contain only VLAN ID 0 
-       hence remove vlans 1-4094 and add VLAN ID 0 */
-    if (((frameFilter & IX_ETH_DB_PRIORITY_TAGGED_FRAMES) != 0)
-        && ((frameFilter & IX_ETH_DB_VLAN_TAGGED_FRAMES) == 0))
-    {
-        result = ixEthDBPortVlanMembershipRangeChange(portID, 
-            1, IX_ETH_DB_802_1Q_MAX_VLAN_ID, portInfo->vlanMembership, REMOVE_VLAN);
-
-        if (result == IX_ETH_DB_SUCCESS)
-        {
-            ixEthDBLocalVlanMembershipChange(0, portInfo->vlanMembership, ADD_VLAN);
-            result = ixEthDBVlanTableRangeUpdate(portID);
-        }
-    }
-    
-    /* untagged only? */
-    if (frameFilter == IX_ETH_DB_UNTAGGED_FRAMES)
-    {
-        portInfo->npeFrameFilter = 0x01;
-    }
-    
-    /* tagged only? */
-    if ((frameFilter & IX_ETH_DB_UNTAGGED_FRAMES) == 0)
-    {
-        portInfo->npeFrameFilter = 0x02;
-    }
-
-    if (result == IX_ETH_DB_SUCCESS)
-    {
-        result = ixEthDBIngressVlanModeUpdate(portID);
-    }
-
-    return result;
-}
-
-/**
- * @brief retrieves the acceptable frame type filter for a port
- *
- * @param portID ID of the port
- * @param frameFilter location to store the frame filter
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    IX_ETH_DB_CHECK_REFERENCE(frameFilter);
-    
-    *frameFilter = ixEthDBPortInfo[portID].frameFilter;
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief sends an NPE the updated configuration related
- * to one QoS priority (associated traffic class and AQM mapping)
- *
- * @param portID ID of the port
- * @param classIndex QoS priority (traffic class index)
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBUpdateTrafficClass(IxEthDBPortId portID, UINT32 classIndex)
-{
-    IxNpeMhMessage message;
-    IX_STATUS result;
-
-    UINT32 trafficClass = ixEthDBPortInfo[portID].priorityTable[classIndex];
-    UINT32 aqmQueue     = ixEthDBPortInfo[portID].ixEthDBTrafficClassAQMAssignments[trafficClass];
-    
-    FILL_SETRXQOSENTRY(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), classIndex, trafficClass, aqmQueue);
-    
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-    
-    return result;
-}
-
-/**
- * @brief sets the priority mapping table
- *
- * @param portID ID of the port
- * @param priorityTable new priority mapping table
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable)
-{
-    UINT32 classIndex;
-    
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    IX_ETH_DB_CHECK_REFERENCE(priorityTable);
-           
-    for (classIndex = 0 ; classIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; classIndex++)
-    {
-        /* check range */
-        if (priorityTable[classIndex] >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount)
-        {
-            return IX_ETH_DB_INVALID_PRIORITY;
-        }
-    }
-    
-    /* set new traffic classes */
-    for (classIndex = 0 ; classIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; classIndex++)
-    {
-        ixEthDBPortInfo[portID].priorityTable[classIndex] = priorityTable[classIndex];
-        
-        if (ixEthDBUpdateTrafficClass(portID, classIndex) != IX_ETH_DB_SUCCESS)
-        {
-            return IX_ETH_DB_FAIL;
-        }
-    }
-    
-    return IX_ETH_DB_SUCCESS;
- }
-
-/**
- * @brief retrieves a port's priority mapping table
- *
- * @param portID ID of the port
- * @param priorityTable location to store the priority table
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    IX_ETH_DB_CHECK_REFERENCE(priorityTable);
-    
-    memcpy(priorityTable, ixEthDBPortInfo[portID].priorityTable, sizeof (IxEthDBPriorityTable));
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief sets one QoS priority => traffic class mapping
- *
- * @param portID ID of the port
- * @param userPriority QoS (user) priority
- * @param trafficClass associated traffic class
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-
-    /* check ranges for userPriority and trafficClass */
-    if (userPriority >= IX_IEEE802_1Q_QOS_PRIORITY_COUNT || trafficClass >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount)
-    {
-        return IX_ETH_DB_INVALID_PRIORITY;
-    }
-    
-    ixEthDBPortInfo[portID].priorityTable[userPriority] = trafficClass;
-    
-    return ixEthDBUpdateTrafficClass(portID, userPriority);
-}
-
-/**
- * @brief retrieves one QoS priority => traffic class mapping
- *
- * @param portID ID of the port
- * @param userPriority QoS (user) priority
- * @param trafficClass location to store the associated traffic class
- * 
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-    
-    IX_ETH_DB_CHECK_REFERENCE(trafficClass);
-    
-    /* check userPriority range */
-    if (userPriority >= IX_IEEE802_1Q_QOS_PRIORITY_COUNT)
-    {
-        return IX_ETH_DB_INVALID_PRIORITY;
-    }
-    
-    *trafficClass = ixEthDBPortInfo[portID].priorityTable[userPriority];
-    
-    return IX_ETH_DB_SUCCESS;
-}
-
-/**
- * @brief enables or disables the source port extraction
- * from the VLAN TPID field
- *
- * @param portID ID of the port
- * @param enable true to enable or false to disable
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable)
-{
-    IxNpeMhMessage message;
-    IX_STATUS result;
-
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS);
-
-    FILL_SETPORTIDEXTRACTIONMODE(message, portID, enable);
-
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-    
-    return result;
-}
diff --git a/drivers/net/npe/IxEthDBWiFi.c b/drivers/net/npe/IxEthDBWiFi.c
deleted file mode 100644
index 44edd47..0000000
--- a/drivers/net/npe/IxEthDBWiFi.c
+++ /dev/null
@@ -1,456 +0,0 @@
-/**
- * @file IxEthDBAPI.c
- *
- * @brief Implementation of the public API
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxEthDB_p.h"
-
-/* forward prototypes */
-IX_ETH_DB_PUBLIC
-MacTreeNode *ixEthDBGatewaySelect(MacTreeNode *stations);
-
-/**
- * @brief sets the BBSID value for the WiFi header conversion feature
- *
- * @param portID ID of the port
- * @param bbsid pointer to the 6-byte BBSID value
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid)
-{
-    IxNpeMhMessage message;
-    IX_STATUS result;
-    
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION);
- 
-    IX_ETH_DB_CHECK_REFERENCE(bbsid);
-    
-    memcpy(ixEthDBPortInfo[portID].bbsid, bbsid, sizeof (IxEthDBMacAddr));
-
-    FILL_SETBBSID_MSG(message, portID, bbsid);
-
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-    
-    return result;
-}
-
-/**
- * @brief updates the Frame Control and Duration/ID WiFi header
- * conversion parameters in an NPE
- *
- * @param portID ID of the port
- *
- * This function will send a message to the NPE updating the 
- * frame conversion parameters for 802.3 => 802.11 header conversion.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or IX_ETH_DB_FAIL otherwise
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-IxEthDBStatus ixEthDBWiFiFrameControlDurationIDUpdate(IxEthDBPortId portID)
-{
-    IxNpeMhMessage message;
-    IX_STATUS result;
-
-    FILL_SETFRAMECONTROLDURATIONID(message, portID, ixEthDBPortInfo[portID].frameControlDurationID);
-    
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-    
-    return result;
-}
-
-/**
- * @brief sets the Duration/ID WiFi frame header conversion parameter
- *
- * @param portID ID of the port
- * @param durationID 16-bit value containing the new Duration/ID parameter
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION);
-
-    ixEthDBPortInfo[portID].frameControlDurationID = (ixEthDBPortInfo[portID].frameControlDurationID & 0xFFFF0000) | durationID;
-    
-    return ixEthDBWiFiFrameControlDurationIDUpdate(portID);
-}
-
-/**
- * @brief sets the Frame Control WiFi frame header conversion parameter
- *
- * @param portID ID of the port
- * @param durationID 16-bit value containing the new Frame Control parameter
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl)
-{
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION);
-
-    ixEthDBPortInfo[portID].frameControlDurationID = (ixEthDBPortInfo[portID].frameControlDurationID & 0xFFFF) | (frameControl << 16); 
-    
-    return ixEthDBWiFiFrameControlDurationIDUpdate(portID);
-}
-
-/**
- * @brief removes a WiFi header conversion record
- *
- * @param portID ID of the port
- * @param macAddr MAC address of the record to remove
- *
- * Note that this function is documented in the main
- * component header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
-{
-    MacDescriptor recordTemplate;
-    
-    IX_ETH_DB_CHECK_PORT(portID);
-    
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION);
-    
-    memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr));
-    
-    recordTemplate.type   = IX_ETH_DB_WIFI_RECORD;
-    recordTemplate.portID = portID;
-    
-    return ixEthDBRemove(&recordTemplate, NULL);
-}
-
-/**
- * @brief adds a WiFi header conversion record
- *
- * @param portID ID of the port
- * @param macAddr MAC address of the record to add
- * @param gatewayMacAddr address of the gateway (or
- * NULL if this is a station record)
- *
- * This function adds a record of type AP_TO_AP (gateway is not NULL)
- * or AP_TO_STA (gateway is NULL) in the main database as a 
- * WiFi header conversion record.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- *
- * @internal
- */
-IX_ETH_DB_PRIVATE
-IxEthDBStatus ixEthDBWiFiEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr)
-{
-    MacDescriptor recordTemplate;
-
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-
-    IX_ETH_DB_CHECK_REFERENCE(macAddr);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION);
-
-    memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr));
-    
-    recordTemplate.type   = IX_ETH_DB_WIFI_RECORD;
-    recordTemplate.portID = portID;
-    
-    if (gatewayMacAddr != NULL)
-    {
-        memcpy(recordTemplate.recordData.wifiData.gwMacAddress, gatewayMacAddr, sizeof (IxEthDBMacAddr));
-        
-        recordTemplate.recordData.wifiData.type = IX_ETH_DB_WIFI_AP_TO_AP;
-    }
-    else
-    {
-        memset(recordTemplate.recordData.wifiData.gwMacAddress, 0, sizeof (IxEthDBMacAddr));
-
-        recordTemplate.recordData.wifiData.type = IX_ETH_DB_WIFI_AP_TO_STA;
-    }
-    
-    return ixEthDBAdd(&recordTemplate, NULL);
-}
-
-/**
- * @brief adds a WiFi header conversion record
- *
- * @param portID ID of the port
- * @param macAddr MAC address of the record to add
- * @param gatewayMacAddr address of the gateway 
- *
- * This function adds a record of type AP_TO_AP
- * in the main database as a WiFi header conversion record.
- *
- * This is simply a wrapper over @ref ixEthDBWiFiEntryAdd().
- *
- * Note that this function is documented in the main
- * component header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr)
-{
-    IX_ETH_DB_CHECK_REFERENCE(gatewayMacAddr);
-
-    return ixEthDBWiFiEntryAdd(portID, macAddr, gatewayMacAddr);
-}
-
-/**
- * @brief adds a WiFi header conversion record
- *
- * @param portID ID of the port
- * @param macAddr MAC address of the record to add
- *
- * This function adds a record of type AP_TO_STA
- * in the main database as a WiFi header conversion record.
- *
- * This is simply a wrapper over @ref ixEthDBWiFiEntryAdd().
- *
- * Note that this function is documented in the main
- * component header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed
- * successfully or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
-{
-    return ixEthDBWiFiEntryAdd(portID, macAddr, NULL);
-}
-
-/**
- * @brief selects a set of gateways from a tree of 
- * WiFi header conversion records
- *
- * @param stations binary tree containing pointers to WiFi header
- * conversion records
- *
- * This function browses through the input binary tree, identifies
- * records of type AP_TO_AP, clones these records and appends them
- * to a vine (a single right-branch binary tree) which is returned
- * as result. A maximum of MAX_GW_SIZE entries containing gateways
- * will be cloned from the original tree.
- *
- * @return vine (linear binary tree) containing record
- * clones of AP_TO_AP type, which have a gateway field
- *
- * @internal
- */
-IX_ETH_DB_PUBLIC
-MacTreeNode *ixEthDBGatewaySelect(MacTreeNode *stations)
-{
-    MacTreeNodeStack *stack;
-    MacTreeNode *gateways, *insertionPlace;
-    UINT32 gwIndex = 1; /* skip the empty root */
-    
-    if (stations == NULL)
-    {
-        return NULL;
-    }
-
-    stack = ixOsalCacheDmaMalloc(sizeof (MacTreeNodeStack));
-
-    if (stack == NULL)
-    {
-        ERROR_LOG("DB: (WiFi) failed to allocate the node stack for gateway tree linearization, out of memory?\n");
-        return NULL;
-    }
-    
-    /* initialize root node */
-    gateways = insertionPlace = NULL;
-        
-    /* start browsing the station tree */
-    NODE_STACK_INIT(stack);
-    
-    /* initialize stack by pushing the tree root at offset 0 */
-    NODE_STACK_PUSH(stack, stations, 0);
-    
-    while (NODE_STACK_NONEMPTY(stack))
-    {
-        MacTreeNode *node;
-        UINT32 offset;
-       
-        NODE_STACK_POP(stack, node, offset);
-
-        /* we can store maximum 31 (32 total, 1 empty root) entries in the gateway tree */
-        if (offset > (MAX_GW_SIZE - 1)) break;
-        
-        /* check if this record has a gateway address */
-        if (node->descriptor != NULL && node->descriptor->recordData.wifiData.type == IX_ETH_DB_WIFI_AP_TO_AP)
-        {
-            /* found a record, create an insertion place */
-            if (insertionPlace != NULL)
-            {
-                insertionPlace->right = ixEthDBAllocMacTreeNode();
-                insertionPlace        = insertionPlace->right;
-            }
-            else
-            {
-                gateways       = ixEthDBAllocMacTreeNode();
-                insertionPlace = gateways;
-            }
-
-            if (insertionPlace == NULL)
-            {
-                /* no nodes left, bail out with what we have */
-                ixOsalCacheDmaFree(stack);
-                return gateways;
-            }
-            
-            /* clone the original record for the gateway tree */
-            insertionPlace->descriptor = ixEthDBCloneMacDescriptor(node->descriptor);
-            
-            /* insert and update the offset in the original record */
-            node->descriptor->recordData.wifiData.gwAddressIndex = gwIndex++;
-        }
-        
-        /* browse the tree */
-        if (node->left != NULL)
-        {
-            NODE_STACK_PUSH(stack, node->left, LEFT_CHILD_OFFSET(offset));
-        }
-
-        if (node->right != NULL)
-        {
-            NODE_STACK_PUSH(stack, node->right, RIGHT_CHILD_OFFSET(offset));
-        }
-    }
-    
-    ixOsalCacheDmaFree(stack);
-    return gateways;    
-}
-
-/**
- * @brief downloads the WiFi header conversion table to an NPE
- *
- * @param portID ID of the port
- *
- * This function prepares the WiFi header conversion tables and
- * downloads them to the specified NPE port.
- *
- * The header conversion tables consist in the main table of
- * addresses and the secondary table of gateways. AP_TO_AP records
- * from the first table contain index fields into the second table
- * for gateway selection.
- *
- * Note that this function is documented in the main component
- * header file, IxEthDB.h.
- *
- * @return IX_ETH_DB_SUCCESS if the operation completed successfully
- * or an appropriate error message otherwise
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID)
-{
-    IxEthDBPortMap query;
-    MacTreeNode *stations = NULL, *gateways = NULL, *gateway = NULL;
-    IxNpeMhMessage message;
-    PortInfo *portInfo;
-    IX_STATUS result;
-
-    IX_ETH_DB_CHECK_PORT(portID);
-
-    IX_ETH_DB_CHECK_SINGLE_NPE(portID);
-    
-    IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION);
-
-    portInfo = &ixEthDBPortInfo[portID];
-   
-    SET_DEPENDENCY_MAP(query, portID);
-    
-    ixEthDBUpdateLock();
-
-    stations = ixEthDBQuery(NULL, query, IX_ETH_DB_WIFI_RECORD, MAX_ELT_SIZE);
-    gateways = ixEthDBGatewaySelect(stations);
-    
-    /* clean up gw area */
-    memset((void *) portInfo->updateMethod.npeGwUpdateZone, FULL_GW_BYTE_SIZE, 0);
-
-    /* write all gateways */
-    gateway = gateways;
-
-    while (gateway != NULL)
-    {
-        ixEthDBNPEGatewayNodeWrite((void *) (((UINT32) portInfo->updateMethod.npeGwUpdateZone) 
-            + gateway->descriptor->recordData.wifiData.gwAddressIndex * ELT_ENTRY_SIZE), 
-            gateway);
-
-        gateway = gateway->right;
-    }
-
-    /* free the gateway tree */
-    if (gateways != NULL)
-    {
-        ixEthDBFreeMacTreeNode(gateways);
-    }
-
-    FILL_SETAPMACTABLE_MSG(message, 
-        IX_OSAL_MMU_VIRT_TO_PHYS(portInfo->updateMethod.npeGwUpdateZone));
-
-    IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result);
-
-    if (result == IX_SUCCESS)
-    {
-        /* update the main tree (the stations tree) */
-        portInfo->updateMethod.searchTree = stations;
-        
-        result = ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_WIFI_RECORD);
-    }
-
-    ixEthDBUpdateUnlock();
-
-    return result;
-}
diff --git a/drivers/net/npe/IxEthMii.c b/drivers/net/npe/IxEthMii.c
deleted file mode 100644
index 27f3548..0000000
--- a/drivers/net/npe/IxEthMii.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/**
- * @file IxEthMii.c
- *
- * @author Intel Corporation
- * @date
- *
- * @brief  MII control functions
- *
- * Design Notes:
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxOsal.h"
-
-#include "IxEthAcc.h"
-#include "IxEthMii_p.h"
-
-#ifdef __wince
-#include "IxOsPrintf.h"
-#endif
-
-/* Array to store the phy IDs of the discovered phys */
-PRIVATE UINT32 ixEthMiiPhyId[IXP425_ETH_ACC_MII_MAX_ADDR];
-
-/*********************************************************
- *
- * Scan for PHYs on the MII bus. This function returns
- * an array of booleans, one for each PHY address.
- * If a PHY is found at a particular address, the
- * corresponding entry in the array is set to true.
- *
- */
-
-PUBLIC IX_STATUS
-ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount)
-{
-    UINT32 i;
-    UINT16 regval, regvalId1, regvalId2;
-
-    /*Search for PHYs on the MII*/
-    /*Search for existant phys on the MDIO bus*/
-
-    if ((phyPresent == NULL) || 
-	(maxPhyCount > IXP425_ETH_ACC_MII_MAX_ADDR))
-    {
-	return IX_FAIL;
-    }
-
-    /* fill the array */
-    for(i=0;
-        i<IXP425_ETH_ACC_MII_MAX_ADDR;
-	i++)
-    {
-	phyPresent[i] = false;
-    }
-
-    /* iterate through the PHY addresses */
-    for(i=0;
-	maxPhyCount > 0 && i<IXP425_ETH_ACC_MII_MAX_ADDR;
-	i++)
-    {
-	ixEthMiiPhyId[i] = IX_ETH_MII_INVALID_PHY_ID;
-	if(ixEthAccMiiReadRtn(i,
-			      IX_ETH_MII_CTRL_REG,
-			      &regval) == IX_ETH_ACC_SUCCESS)
-	{
-	    if((regval & 0xffff) != 0xffff)
-	    {
-		maxPhyCount--;
-		/*Need to read the register twice here to flush PHY*/
-		ixEthAccMiiReadRtn(i,  IX_ETH_MII_PHY_ID1_REG, &regvalId1);
-		ixEthAccMiiReadRtn(i,  IX_ETH_MII_PHY_ID1_REG, &regvalId1);
-		ixEthAccMiiReadRtn(i,  IX_ETH_MII_PHY_ID2_REG, &regvalId2);
-		ixEthMiiPhyId[i] = (regvalId1 << IX_ETH_MII_REG_SHL) | regvalId2;
-		if ((ixEthMiiPhyId[i] == IX_ETH_MII_KS8995_PHY_ID)
-		    || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT971_PHY_ID)
-		    || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT972_PHY_ID)
-		    || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT973_PHY_ID)
-		    || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT973A3_PHY_ID)
-		    || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT9785_PHY_ID)
-		    )
-		{
-		    /* supported phy */
-		    phyPresent[i] = true;
-		} /* end of if(ixEthMiiPhyId) */
-		else
-		{
-		    if (ixEthMiiPhyId[i] != IX_ETH_MII_INVALID_PHY_ID)
-		    {
-			/* unsupported phy */
-                        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-                                   IX_OSAL_LOG_DEV_STDOUT,
-				    "ixEthMiiPhyScan : unexpected Mii PHY ID %8.8x\n", 
-				    ixEthMiiPhyId[i], 2, 3, 4, 5, 6);
-			ixEthMiiPhyId[i] = IX_ETH_MII_UNKNOWN_PHY_ID;
-			phyPresent[i] = true;
-		    }
-		} 
-	    }
-	}
-    }
-    return IX_SUCCESS;
-}
-
-/************************************************************
- *
- * Configure the PHY at the specified address
- *
- */
-PUBLIC IX_STATUS
-ixEthMiiPhyConfig(UINT32 phyAddr,
-		  BOOL speed100,
-		  BOOL fullDuplex,
-		  BOOL autonegotiate)
-{
-    UINT16 regval=0;
-
-    /* parameter check */
-    if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
-	(ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID))
-    {
-    /*
-     * set the control register
-     */
-	if(autonegotiate)
-	{
-	    regval |= IX_ETH_MII_CR_AUTO_EN | IX_ETH_MII_CR_RESTART;
-	}
-	else
-	{
-	    if(speed100)
-	    {
-		regval |= IX_ETH_MII_CR_100;
-	    }
-	    if(fullDuplex)
-	    {
-		regval |= IX_ETH_MII_CR_FDX;
-	    }
-	} /* end of if-else() */
-	if (ixEthAccMiiWriteRtn(phyAddr, 
-				IX_ETH_MII_CTRL_REG, 
-				regval) == IX_ETH_ACC_SUCCESS)
-	{
-	    return IX_SUCCESS;
-	}
-    } /* end of if(phyAddr) */
-    return IX_FAIL;
-}
-
-/******************************************************************
- *
- *  Enable the PHY Loopback at the specified address
- */
-PUBLIC IX_STATUS
-ixEthMiiPhyLoopbackEnable (UINT32 phyAddr)
-{
-  UINT16 regval ;  
-
-  if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) && 
-      (IX_ETH_MII_INVALID_PHY_ID != ixEthMiiPhyId[phyAddr]))
-  {
-      /* read/write the control register */
-      if(ixEthAccMiiReadRtn (phyAddr,
-			     IX_ETH_MII_CTRL_REG, 
-			     &regval) 
-	 == IX_ETH_ACC_SUCCESS)
-      {
-	  if(ixEthAccMiiWriteRtn (phyAddr, 
-				  IX_ETH_MII_CTRL_REG, 
-				  regval | IX_ETH_MII_CR_LOOPBACK)
-	     == IX_ETH_ACC_SUCCESS)
-	  {
-	      return IX_SUCCESS;
-	  }
-      }
-  }
-  return IX_FAIL;
-}
-
-/******************************************************************
- *
- *  Disable the PHY Loopback at the specified address
- */
-PUBLIC IX_STATUS
-ixEthMiiPhyLoopbackDisable (UINT32 phyAddr)
-{
-  UINT16 regval ;  
-
-  if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) && 
-      (IX_ETH_MII_INVALID_PHY_ID != ixEthMiiPhyId[phyAddr]))
-  {
-      /* read/write the control register */
-      if(ixEthAccMiiReadRtn (phyAddr,
-			     IX_ETH_MII_CTRL_REG, 
-			     &regval) 
-	 == IX_ETH_ACC_SUCCESS)
-      {
-	  if(ixEthAccMiiWriteRtn (phyAddr, 
-				  IX_ETH_MII_CTRL_REG, 
-				  regval & (~IX_ETH_MII_CR_LOOPBACK))
-	     == IX_ETH_ACC_SUCCESS)
-	  {
-	      return IX_SUCCESS;
-	  }
-      }
-  }
-  return IX_FAIL;
-}
-
-/******************************************************************
- *
- *  Reset the PHY at the specified address
- */
-PUBLIC IX_STATUS
-ixEthMiiPhyReset(UINT32 phyAddr)
-{
-    UINT32 timeout;
-    UINT16 regval;
-
-    if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
-	(ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID))
-    {
-	if ((ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT971_PHY_ID)	||
-	    (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT972_PHY_ID)	||
-	    (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT973_PHY_ID)	||
-	    (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT973A3_PHY_ID)	||
-		(ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT9785_PHY_ID)
-	    )
-	{
-	    /* use the control register to reset the phy */
-	    ixEthAccMiiWriteRtn(phyAddr, 
-				IX_ETH_MII_CTRL_REG,
-				IX_ETH_MII_CR_RESET);
-	 
-	    /* poll until the reset bit is cleared */
-	    timeout = 0;
-	    do
-	    {
-		ixOsalSleep (IX_ETH_MII_RESET_POLL_MS);
-
-		/* read the control register and check for timeout */
-		ixEthAccMiiReadRtn(phyAddr, 
-				   IX_ETH_MII_CTRL_REG,
-				   &regval);
-		if ((regval & IX_ETH_MII_CR_RESET) == 0)
-		{
-		    /* timeout bit is self-cleared */
-		    break;
-		}
-		timeout += IX_ETH_MII_RESET_POLL_MS;
-	    }
-	    while (timeout < IX_ETH_MII_RESET_DELAY_MS);
-
-	    /* check for timeout */
-	    if (timeout >= IX_ETH_MII_RESET_DELAY_MS)
-	    {
-		ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
-				    IX_ETH_MII_CR_NORM_EN);
-		return IX_FAIL;
-	    }
-
-	    return IX_SUCCESS;
-	} /* end of if(ixEthMiiPhyId) */
-	else if (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_KS8995_PHY_ID)
-	{
-	    /* reset bit is reserved, just reset the control register */
-	    ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
-				IX_ETH_MII_CR_NORM_EN);
-	    return IX_SUCCESS;
-	}
-	else
-	{
-	    /* unknown PHY, set the control register reset bit,
-	     * wait 2 s. and clear the control register.
-	     */
-	    ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
-				IX_ETH_MII_CR_RESET);
-	    
-	    ixOsalSleep (IX_ETH_MII_RESET_DELAY_MS);
-	    
-	    ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG,
-				IX_ETH_MII_CR_NORM_EN);
-	    return IX_SUCCESS;
-	} /* end of if-else(ixEthMiiPhyId) */
-    } /* end of if(phyAddr) */
-    return IX_FAIL;
-}
-
-/*****************************************************************
- *
- *  Link state query functions
- */
-
-PUBLIC IX_STATUS
-ixEthMiiLinkStatus(UINT32 phyAddr,
-           BOOL *linkUp,
-           BOOL *speed100,
-           BOOL *fullDuplex,
-           BOOL *autoneg)
-{
-    UINT16 ctrlRegval, statRegval, regval, regval4, regval5;
-
-    /* check the parameters */
-    if ((linkUp == NULL) || 
-	(speed100 == NULL) || 
-	(fullDuplex == NULL) ||
-	(autoneg == NULL))
-    {
-	return IX_FAIL;
-    }
-
-    *linkUp = false;
-    *speed100 = false;
-    *fullDuplex = false;
-    *autoneg = false;
-
-    if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) &&
-	(ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID))
-    {
-	if ((ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT971_PHY_ID)	||
-	    (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT972_PHY_ID)	||
-	    (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT9785_PHY_ID)
-		)
-	{
-	    /* --------------------------------------------------*/
-	    /* Retrieve information from PHY specific register   */
-	    /* --------------------------------------------------*/
-	    if (ixEthAccMiiReadRtn(phyAddr, 
-				   IX_ETH_MII_STAT2_REG, 
-				   &regval) != IX_ETH_ACC_SUCCESS)
-	    {
-		return IX_FAIL;
-	    }
-	    *linkUp = ((regval & IX_ETH_MII_SR2_LINK) != 0);
-	    *speed100 = ((regval & IX_ETH_MII_SR2_100) != 0);
-	    *fullDuplex = ((regval & IX_ETH_MII_SR2_FD) != 0);
-	    *autoneg = ((regval & IX_ETH_MII_SR2_AUTO) != 0);
-	    return IX_SUCCESS;
-	} /* end of if(ixEthMiiPhyId) */
-	else
-	{    
-	    /* ----------------------------------------------------*/
-	    /* Retrieve information from status and ctrl registers */
-	    /* ----------------------------------------------------*/
-	    if (ixEthAccMiiReadRtn(phyAddr,  
-				   IX_ETH_MII_CTRL_REG, 
-				   &ctrlRegval) != IX_ETH_ACC_SUCCESS)
-	    {
-		return IX_FAIL;
-	    }
-	    ixEthAccMiiReadRtn(phyAddr,  IX_ETH_MII_STAT_REG, &statRegval);
-	    
-	    *linkUp = ((statRegval & IX_ETH_MII_SR_LINK_STATUS) != 0);
-	    if (*linkUp)
-	    {
-		*autoneg = ((ctrlRegval & IX_ETH_MII_CR_AUTO_EN) != 0) &&
-		    ((statRegval &  IX_ETH_MII_SR_AUTO_SEL) != 0) &&
-		    ((statRegval & IX_ETH_MII_SR_AUTO_NEG) != 0);
-		
-		if (*autoneg)
-		{
-		    /* mask the current stat values with the capabilities */
-		    ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_AN_ADS_REG, &regval4);
-		    ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_AN_PRTN_REG, &regval5);
-		    /* merge the flags from the 3 registers */
-		    regval = (statRegval & ((regval4 & regval5) << 6));
-		    /* initialise from status register values */
-		    if ((regval & IX_ETH_MII_SR_TX_FULL_DPX) != 0)
-		    {
-			/* 100 Base X full dplx */
-			*speed100 = true;
-			*fullDuplex = true;
-			return IX_SUCCESS;
-		    }
-		    if ((regval & IX_ETH_MII_SR_TX_HALF_DPX) != 0)
-		    {
-			/* 100 Base X half dplx */
-			*speed100 = true;
-			return IX_SUCCESS;
-		    }
-		    if ((regval & IX_ETH_MII_SR_10T_FULL_DPX) != 0)
-		    {
-			/* 10 mb full dplx */
-			*fullDuplex = true;
-			return IX_SUCCESS;
-		    }
-		    if ((regval & IX_ETH_MII_SR_10T_HALF_DPX) != 0)
-		    {
-			/* 10 mb half dplx */
-			return IX_SUCCESS;
-		    }
-		} /* end of if(autoneg) */
-		else
-		{
-		    /* autonegotiate not complete, return setup parameters */
-		    *speed100 = ((ctrlRegval & IX_ETH_MII_CR_100) != 0);
-		    *fullDuplex = ((ctrlRegval & IX_ETH_MII_CR_FDX) != 0);
-		}
-	    } /* end of if(linkUp) */
-	} /* end of if-else(ixEthMiiPhyId) */
-    } /* end of if(phyAddr) */
-    else
-    {
-	return IX_FAIL;
-    } /* end of if-else(phyAddr) */
-    return IX_SUCCESS;
-}
-
-/*****************************************************************
- *
- *  Link state display functions
- */
-
-PUBLIC IX_STATUS
-ixEthMiiPhyShow (UINT32 phyAddr)
-{
-    BOOL linkUp, speed100, fullDuplex, autoneg;
-    UINT16 cregval;
-    UINT16 sregval;
-    
-
-    ixEthAccMiiReadRtn(phyAddr,  IX_ETH_MII_STAT_REG, &sregval);
-    ixEthAccMiiReadRtn(phyAddr,  IX_ETH_MII_CTRL_REG, &cregval);
-
-    /* get link information */
-    if (ixEthMiiLinkStatus(phyAddr,
-			   &linkUp,
-			   &speed100,
-			   &fullDuplex,
-			   &autoneg) != IX_ETH_ACC_SUCCESS)
-    {
-	printf("PHY Status unknown\n");
-	return IX_FAIL;
-    }
-
-    printf("PHY ID [phyAddr]: %8.8x\n",ixEthMiiPhyId[phyAddr]);
-    printf( " Status reg:  %4.4x\n",sregval);
-    printf( " control reg: %4.4x\n",cregval);
-    /* display link information */
-    printf("PHY Status:\n");
-    printf("    Link is %s\n",
-	   (linkUp ? "Up" : "Down"));
-    if((sregval & IX_ETH_MII_SR_REMOTE_FAULT) != 0)
-    {
-	printf("    Remote fault detected\n");
-    }
-    printf("    Auto Negotiation %s\n",
-	   (autoneg ? "Completed" : "Not Completed"));
-
-    printf("PHY Configuration:\n");
-    printf("    Speed %sMb/s\n",
-	   (speed100 ? "100" : "10"));
-    printf("    %s Duplex\n",
-	   (fullDuplex ? "Full" : "Half"));
-    printf("    Auto Negotiation %s\n",
-	   (autoneg ? "Enabled" : "Disabled"));
-    return IX_SUCCESS;
-}
-
diff --git a/drivers/net/npe/IxFeatureCtrl.c b/drivers/net/npe/IxFeatureCtrl.c
deleted file mode 100644
index 0b6807d..0000000
--- a/drivers/net/npe/IxFeatureCtrl.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/**
- * @file IxFeatureCtrl.c
- *
- * @author Intel Corporation
- * @date 29-Jan-2003
- *
- * @brief Feature Control Public API Implementation
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-#include "IxOsal.h"
-#include "IxVersionId.h"
-#include "IxFeatureCtrl.h"
-
-/* Macro to read from the Feature Control Register */
-#define IX_FEATURE_CTRL_READ(result) \
-do { \
-ixFeatureCtrlExpMap(); \
-(result) = IX_OSAL_READ_LONG(ixFeatureCtrlRegister); \
-} while (0)
-
-/* Macro to write to the Feature Control Register */
-#define IX_FEATURE_CTRL_WRITE(value) \
-do { \
-ixFeatureCtrlExpMap(); \
-IX_OSAL_WRITE_LONG(ixFeatureCtrlRegister, (value)); \
-} while (0)
-
-/*
- * This is the offset of the feature register relative to the base of the
- * Expansion Bus Controller MMR.
- */
-#define IX_FEATURE_CTRL_REG_OFFSET (0x00000028)
-
-
-/* Boolean to mark the fact that the EXP_CONFIG address space was mapped */
-PRIVATE BOOL ixFeatureCtrlExpCfgRegionMapped = false;
-
-/* Pointer holding the virtual address of the Feature Control Register */
-PRIVATE VUINT32 *ixFeatureCtrlRegister = NULL;
-
-/* Place holder to store the software configuration */
-PRIVATE BOOL swConfiguration[IX_FEATURECTRL_SWCONFIG_MAX];
-
-/* Flag to control swConfiguration[] is initialized once */
-PRIVATE BOOL swConfigurationFlag = false ;
-
-/* Array containing component mask values */
-#ifdef __ixp42X
-UINT32 componentMask[IX_FEATURECTRL_MAX_COMPONENTS] = {
-    (0x1<<IX_FEATURECTRL_RCOMP),
-    (0x1<<IX_FEATURECTRL_USB),
-    (0x1<<IX_FEATURECTRL_HASH),
-    (0x1<<IX_FEATURECTRL_AES),
-    (0x1<<IX_FEATURECTRL_DES),
-    (0x1<<IX_FEATURECTRL_HDLC),
-    (0x1<<IX_FEATURECTRL_AAL),
-    (0x1<<IX_FEATURECTRL_HSS),
-    (0x1<<IX_FEATURECTRL_UTOPIA),
-    (0x1<<IX_FEATURECTRL_ETH0),
-    (0x1<<IX_FEATURECTRL_ETH1),
-    (0x1<<IX_FEATURECTRL_NPEA),
-    (0x1<<IX_FEATURECTRL_NPEB),
-    (0x1<<IX_FEATURECTRL_NPEC),
-    (0x1<<IX_FEATURECTRL_PCI),
-    IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE,
-    (0x3<<IX_FEATURECTRL_UTOPIA_PHY_LIMIT),
-    (0x1<<IX_FEATURECTRL_UTOPIA_PHY_LIMIT_BIT2),
-    IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE,
-    IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE,
-    IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE,
-    IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE,
-    IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE
-};
-#elif defined (__ixp46X)
-UINT32 componentMask[IX_FEATURECTRL_MAX_COMPONENTS] = {
-    (0x1<<IX_FEATURECTRL_RCOMP),
-    (0x1<<IX_FEATURECTRL_USB),
-    (0x1<<IX_FEATURECTRL_HASH),
-    (0x1<<IX_FEATURECTRL_AES),
-    (0x1<<IX_FEATURECTRL_DES),
-    (0x1<<IX_FEATURECTRL_HDLC),
-    IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE,  /* AAL component is always on */
-    (0x1<<IX_FEATURECTRL_HSS),
-    (0x1<<IX_FEATURECTRL_UTOPIA),
-    (0x1<<IX_FEATURECTRL_ETH0),
-    (0x1<<IX_FEATURECTRL_ETH1),
-    (0x1<<IX_FEATURECTRL_NPEA),
-    (0x1<<IX_FEATURECTRL_NPEB),
-    (0x1<<IX_FEATURECTRL_NPEC),
-    (0x1<<IX_FEATURECTRL_PCI),
-    (0x1<<IX_FEATURECTRL_ECC_TIMESYNC),
-    (0x3<<IX_FEATURECTRL_UTOPIA_PHY_LIMIT),
-    (0x1<<IX_FEATURECTRL_UTOPIA_PHY_LIMIT_BIT2), /* NOT TO BE USED */
-    (0x1<<IX_FEATURECTRL_USB_HOST_CONTROLLER),
-    (0x1<<IX_FEATURECTRL_NPEA_ETH),
-    (0x1<<IX_FEATURECTRL_NPEB_ETH),
-    (0x1<<IX_FEATURECTRL_RSA),
-    (0x3<<IX_FEATURECTRL_XSCALE_MAX_FREQ),
-    (0x1<<IX_FEATURECTRL_XSCALE_MAX_FREQ_BIT2)
-};
-#endif /* __ixp42X */
-
-/**
- * Forward declaration
- */
-PRIVATE
-void ixFeatureCtrlExpMap(void);
-
-PRIVATE 
-void ixFeatureCtrlSwConfigurationInit(void);
-
-/**
- * Function to map EXP_CONFIG space
- */
-PRIVATE
-void ixFeatureCtrlExpMap(void)
-{
-    UINT32 expCfgBaseAddress = 0;
-
-    /* If the EXP Configuration space has already been mapped then
-     * return */
-    if (ixFeatureCtrlExpCfgRegionMapped == true)
-    {
-	return;
-    }
-
-    /* Map (get virtual address) for the EXP_CONFIG space */
-    expCfgBaseAddress = (UINT32)
-	(IX_OSAL_MEM_MAP(IX_OSAL_IXP400_EXP_BUS_REGS_PHYS_BASE,
-			   IX_OSAL_IXP400_EXP_REG_MAP_SIZE));
-
-    /* Assert that the mapping operation succeeded */
-    IX_OSAL_ASSERT(expCfgBaseAddress);
-
-    /* Set the address of the Feature register */
-    ixFeatureCtrlRegister =
-	(VUINT32 *) (expCfgBaseAddress + IX_FEATURE_CTRL_REG_OFFSET);
-
-    /* Mark the fact that the EXP_CONFIG space has already been mapped */
-    ixFeatureCtrlExpCfgRegionMapped = true;
-}
-
-/**
- * Function definition: ixFeatureCtrlSwConfigurationInit
- * This function will only initialize software configuration once.
- */
-PRIVATE void ixFeatureCtrlSwConfigurationInit(void)
-{
-  UINT32 i;
-  if (false == swConfigurationFlag)
-  {
-    for (i=0; i<IX_FEATURECTRL_SWCONFIG_MAX ; i++)
-    {
-        /* By default, all software configuration are enabled */
-        swConfiguration[i]= true ;
-    }
-    /*Make sure this function only initializes swConfiguration[] once*/
-    swConfigurationFlag = true ;
-  }  
-}
-
-/**
- * Function definition: ixFeatureCtrlRead
- */
-IxFeatureCtrlReg 
-ixFeatureCtrlRead (void)
-{
-    IxFeatureCtrlReg result;
-
-#if CPU!=SIMSPARCSOLARIS
-    /* Read the feature control register */
-    IX_FEATURE_CTRL_READ(result);
-    return result;
-#else
-    /* Return an invalid value for VxWorks simulation */
-    result = 0xFFFFFFFF;
-    return result;
-#endif
-}
-
-/**
- * Function definition: ixFeatureCtrlWrite
- */
-void
-ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg)
-{
-#if CPU!=SIMSPARCSOLARIS
-    /* Write value to feature control register */
-    IX_FEATURE_CTRL_WRITE(expUnitReg);
-#endif
-}
-
-
-/**
- * Function definition: ixFeatureCtrlHwCapabilityRead
- */
-IxFeatureCtrlReg
-ixFeatureCtrlHwCapabilityRead (void)
-{ 
-  IxFeatureCtrlReg currentReg, hwCapability;
-  
-  /* Capture a copy of feature control register */
-  currentReg = ixFeatureCtrlRead(); 
-
-  /* Try to enable all hardware components. 
-   * Only software disable hardware can be enabled again */
-  ixFeatureCtrlWrite(0);
-  
-  /* Read feature control register to know the hardware capability. */ 
-  hwCapability = ixFeatureCtrlRead();
-     
-  /* Restore initial feature control value */
-  ixFeatureCtrlWrite(currentReg);
-
-  /* return Hardware Capability */
-  return hwCapability;  
-}
-
-
-/**
- * Function definition: ixFeatureCtrlComponentCheck
- */
-IX_STATUS 
-ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType)
-{
-  IxFeatureCtrlReg expUnitReg; 
-  UINT32 mask = 0;
-
-  /* Lookup mask of component */
-  mask=componentMask[componentType];
-
-  /* Check if mask is available or not */
-  if(IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE == mask)
-  {
-      return IX_FEATURE_CTRL_COMPONENT_DISABLED;
-  }
-
-  if(IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE == mask)
-  {
-      return IX_FEATURE_CTRL_COMPONENT_ENABLED;
-  }
-
-  /* Read feature control register to know current hardware capability. */ 
-  expUnitReg = ixFeatureCtrlRead();
-
-  /* For example: To check for Hashing Coprocessor (bit-2) 
-   *                   expUniteg    = 0x0010
-   *                  ~expUnitReg   = 0x1101 
-   *                  componentType = 0x0100
-   *    ~expUnitReg & componentType = 0x0100 (Not zero)                      
-   */
- 
-  /* 
-   * Inverse the bit value because available component is 0 in value 
-   */
-  expUnitReg = ~expUnitReg ;
-
-  if (expUnitReg & mask)
-  {
-     return (IX_FEATURE_CTRL_COMPONENT_ENABLED);
-  }   
-  else
-  {  
-     return (IX_FEATURE_CTRL_COMPONENT_DISABLED);
-  } 
-}
-
-
-/**
- * Function definition: ixFeatureCtrlProductIdRead
- */
-IxFeatureCtrlProductId
-ixFeatureCtrlProductIdRead ()
-{
-#if CPU!=SIMSPARCSOLARIS
-  IxFeatureCtrlProductId  pdId = 0 ;
-   
-  /* Use ARM instruction to move register0 from coprocessor to ARM register */ 
-    
-#ifndef __wince
-    __asm__("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(pdId) :);
-#else
-      
-#ifndef IN_KERNEL
-        BOOL  mode;
-#endif
-    extern  IxFeatureCtrlProductId AsmixFeatureCtrlProductIdRead();
-    
-#ifndef IN_KERNEL
-    mode = SetKMode(true);
-#endif
-    pdId = AsmixFeatureCtrlProductIdRead();
-#ifndef IN_KERNEL
-    SetKMode(mode);
-#endif
-
-#endif
-  return (pdId);
-#else
-  /* Return an invalid value for VxWorks simulation */
-  return 0xffffffff;
-#endif
-}
-
-/**
- * Function definition: ixFeatureCtrlDeviceRead
- */
-IxFeatureCtrlDeviceId
-ixFeatureCtrlDeviceRead ()
-{
-  return ((ixFeatureCtrlProductIdRead() >> IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET) 
-             & IX_FEATURE_CTRL_DEVICE_TYPE_MASK);
-} /* End function ixFeatureCtrlDeviceRead */
-
-
-/**
- * Function definition: ixFeatureCtrlSwConfigurationCheck
- */
-IX_STATUS
-ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType)
-{
-  if (swConfigType >= IX_FEATURECTRL_SWCONFIG_MAX)  
-  {
-     ixOsalLog(IX_OSAL_LOG_LVL_WARNING, 
-               IX_OSAL_LOG_DEV_STDOUT,
-               "FeatureCtrl: Invalid software configuraiton input.\n",
-               0, 0, 0, 0, 0, 0);  
-
-     return IX_FEATURE_CTRL_SWCONFIG_DISABLED;
-  }
-
-  /* The function will only initialize once. */
-  ixFeatureCtrlSwConfigurationInit();
-  
-  /* Check and return software configuration */
-  return  ((swConfiguration[(UINT32)swConfigType] == true) ? IX_FEATURE_CTRL_SWCONFIG_ENABLED: IX_FEATURE_CTRL_SWCONFIG_DISABLED);
-}
-
-/**
- * Function definition: ixFeatureCtrlSwConfigurationWrite
- */
-void
-ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled)
-{
-  if (swConfigType >= IX_FEATURECTRL_SWCONFIG_MAX)  
-  {
-     ixOsalLog(IX_OSAL_LOG_LVL_WARNING, 
-               IX_OSAL_LOG_DEV_STDOUT,
-               "FeatureCtrl: Invalid software configuraiton input.\n",
-               0, 0, 0, 0, 0, 0);  
-
-     return;
-  }
-
-  /* The function will only initialize once. */
-  ixFeatureCtrlSwConfigurationInit();
-  
-  /* Write software configuration */
-  swConfiguration[(UINT32)swConfigType]=enabled ;
-}
-
-/**
- * Function definition: ixFeatureCtrlIxp400SwVersionShow
- */
-void
-ixFeatureCtrlIxp400SwVersionShow (void)
-{
-    printf ("\nIXP400 Software Release %s %s\n\n", IX_VERSION_ID, IX_VERSION_INTERNAL_ID);
-
-}
-
-/**
- * Function definition: ixFeatureCtrlSoftwareBuildGet
- */
-IxFeatureCtrlBuildDevice
-ixFeatureCtrlSoftwareBuildGet (void)
-{
-    #ifdef __ixp42X
-    return IX_FEATURE_CTRL_SW_BUILD_IXP42X;
-    #else
-    return IX_FEATURE_CTRL_SW_BUILD_IXP46X;
-    #endif
-}
diff --git a/drivers/net/npe/IxNpeDl.c b/drivers/net/npe/IxNpeDl.c
deleted file mode 100644
index 0e5c428..0000000
--- a/drivers/net/npe/IxNpeDl.c
+++ /dev/null
@@ -1,916 +0,0 @@
-/**
- * @file IxNpeDl.c
- *
- * @author Intel Corporation
- * @date 08 January 2002
- *
- * @brief This file contains the implementation of the public API for the
- *        IXP425 NPE Downloader component
- *
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * Put the system defined include files required
- */
-
-/*
- * Put the user defined include files required
- */
-#include "IxNpeDl.h"
-#include "IxNpeDlImageMgr_p.h"
-#include "IxNpeDlNpeMgr_p.h"
-#include "IxNpeDlMacros_p.h"
-#include "IxFeatureCtrl.h"
-#include "IxOsal.h"
-/*
- * #defines used in this file
- */
- #define IMAGEID_MAJOR_NUMBER_DEFAULT 0
- #define IMAGEID_MINOR_NUMBER_DEFAULT 0
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-typedef struct
-{
-    BOOL validImage;
-    IxNpeDlImageId imageId;
-} IxNpeDlNpeState;
-
-/* module statistics counters */
-typedef struct
-{
-    UINT32 attemptedDownloads;
-    UINT32 successfulDownloads;
-    UINT32 criticalFailDownloads;
-} IxNpeDlStats;
-
-/*
- * Variable declarations global to this file only.  Externs are followed
- * by static variables.
- */
-static IxNpeDlNpeState ixNpeDlNpeState[IX_NPEDL_NPEID_MAX] =
-{
-    {false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}},
-    {false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}},
-    {false, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}
-};
-
-static IxNpeDlStats ixNpeDlStats;
-
-/*
- * Software guard to prevent NPE from being started multiple times.
- */
-static BOOL ixNpeDlNpeStarted[IX_NPEDL_NPEID_MAX] ={false, false, false} ;
-
-
-/*
- * static function prototypes.
- */
-PRIVATE IX_STATUS
-ixNpeDlNpeInitAndStartInternal (UINT32 *imageLibrary, UINT32 imageId);
-
-/*
- * Function definition: ixNpeDlImageDownload
- */
-PUBLIC IX_STATUS
-ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr,
-                      BOOL verify)
-{
-    UINT32        imageSize;
-    UINT32       *imageCodePtr  = NULL;
-    IX_STATUS     status;
-    IxNpeDlNpeId  npeId           = imageIdPtr->npeId;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Entering ixNpeDlImageDownload\n");
-
-    ixNpeDlStats.attemptedDownloads++;
-
-    /* Check input parameters */
-    if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0))
-    {
-        status = IX_NPEDL_PARAM_ERR;
-        IX_NPEDL_ERROR_REPORT ("ixNpeDlImageDownload - invalid parameter\n");
-    }
-    else
-    {
-        /* Ensure initialisation has been completed */
-        ixNpeDlNpeMgrInit();
-
-	/* If not IXP42X A0 stepping, proceed to check for existence of npe's */
-	if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 !=
-	     (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-	    || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-	{
-            if (npeId == IX_NPEDL_NPEID_NPEA)
-            {
-                if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) ==
-                    IX_FEATURE_CTRL_COMPONENT_DISABLED)
-                {
-                    IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does"
-                                            " not exist\n");
-                    return IX_SUCCESS;
-                }
-            } /* end of if(npeId) */
-            else if (npeId == IX_NPEDL_NPEID_NPEB)
-            {
-                if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)==
-                    IX_FEATURE_CTRL_COMPONENT_DISABLED)
-                {
-                    IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified"
-                                            " does not exist\n");
-                    return IX_SUCCESS;
-                }
-            } /* end of elseif(npeId) */
-            else if (npeId == IX_NPEDL_NPEID_NPEC)
-            {
-                if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)==
-                    IX_FEATURE_CTRL_COMPONENT_DISABLED)
-                {
-                    IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified"
-                                            " does not exist\n");
-                    return IX_SUCCESS;
-                }
-            } /* end of elseif(npeId) */
-        } /* end of if(IX_FEATURE_CTRL_SILICON_TYPE_B0) */ /*End of Silicon Type Check*/
-
-        /* stop and reset the NPE */
-        if (IX_SUCCESS != ixNpeDlNpeStopAndReset (npeId))
-        {
-            IX_NPEDL_ERROR_REPORT ("Failed to stop and reset NPE\n");
-            return IX_FAIL;
-        }
-
-        /* Locate image */
-        status = ixNpeDlImageMgrImageLocate (imageIdPtr, &imageCodePtr,
-                                             &imageSize);
-        if (IX_SUCCESS == status)
-        {
-            /*
-             * If download was successful, store image Id in list of
-             * currently loaded images. If a critical error occured
-             * during download, record that the NPE has an invalid image
-             */
-            status = ixNpeDlNpeMgrImageLoad (npeId, imageCodePtr,
-                                             verify);
-            if (IX_SUCCESS == status)
-            {
-                ixNpeDlNpeState[npeId].imageId = *imageIdPtr;
-                ixNpeDlNpeState[npeId].validImage = true;
-                ixNpeDlStats.successfulDownloads++;
-
-                status =  ixNpeDlNpeExecutionStart (npeId);
-            }
-            else if ((status == IX_NPEDL_CRITICAL_NPE_ERR) ||
-                     (status == IX_NPEDL_CRITICAL_MICROCODE_ERR))
-            {
-                ixNpeDlNpeState[npeId].imageId = *imageIdPtr;
-                ixNpeDlNpeState[npeId].validImage = false;
-                ixNpeDlStats.criticalFailDownloads++;
-            }
-        } /* end of if(IX_SUCCESS) */ /* condition: image located successfully in microcode image */
-    } /* end of if-else(npeId) */ /* condition: parameter checks ok */
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Exiting ixNpeDlImageDownload : status = %d\n", status);
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlAvailableImagesCountGet
- */
-PUBLIC IX_STATUS
-ixNpeDlAvailableImagesCountGet (UINT32 *numImagesPtr)
-{
-    IX_STATUS status;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Entering ixNpeDlAvailableImagesCountGet\n");
-
-    /* Check input parameters */
-    if (numImagesPtr == NULL)
-    {
-        status = IX_NPEDL_PARAM_ERR;
-        IX_NPEDL_ERROR_REPORT ("ixNpeDlAvailableImagesCountGet - "
-                               "invalid parameter\n");
-    }
-    else
-    {
-        /*
-         * Use ImageMgr module to get no. of images listed in Image Library Header.
-         * If NULL is passed as imageListPtr parameter to following function,
-         * it will only fill number of images into numImagesPtr
-         */
-        status = ixNpeDlImageMgrImageListExtract (NULL, numImagesPtr);
-    } /* end of if-else(numImagesPtr) */
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Exiting ixNpeDlAvailableImagesCountGet : "
-                     "status = %d\n", status);
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlAvailableImagesListGet
- */
-PUBLIC IX_STATUS
-ixNpeDlAvailableImagesListGet (IxNpeDlImageId *imageIdListPtr,
-                               UINT32 *listSizePtr)
-{
-    IX_STATUS status;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Entering ixNpeDlAvailableImagesListGet\n");
-
-    /* Check input parameters */
-    if ((imageIdListPtr == NULL) || (listSizePtr == NULL))
-    {
-        status = IX_NPEDL_PARAM_ERR;
-        IX_NPEDL_ERROR_REPORT ("ixNpeDlAvailableImagesListGet - "
-                               "invalid parameter\n");
-    }
-    else
-    {
-        /* Call ImageMgr to get list of images listed in Image Library Header */
-        status = ixNpeDlImageMgrImageListExtract (imageIdListPtr,
-                                                  listSizePtr);
-    } /* end of if-else(imageIdListPtr) */
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Exiting ixNpeDlAvailableImagesListGet : status = %d\n",
-                     status);
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlLoadedImageGet
- */
-PUBLIC IX_STATUS
-ixNpeDlLoadedImageGet (IxNpeDlNpeId npeId,
-                       IxNpeDlImageId *imageIdPtr)
-{
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Entering ixNpeDlLoadedImageGet\n");
-
-    /* Check input parameters */
-    if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0) || (imageIdPtr == NULL))
-    {
-        status = IX_NPEDL_PARAM_ERR;
-        IX_NPEDL_ERROR_REPORT ("ixNpeDlLoadedImageGet - invalid parameter\n");
-    }
-    else
-    {
-
-         /* If not IXP42X A0 stepping, proceed to check for existence of npe's */
-         if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 !=
-	      (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-	     || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-        {
-            if (npeId == IX_NPEDL_NPEID_NPEA &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) ==
-                 IX_FEATURE_CTRL_COMPONENT_DISABLED))
-            {
-                IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does"
-                                        " not exist\n");
-                return IX_SUCCESS;
-            } /* end of if(npeId) */
-
-            if (npeId == IX_NPEDL_NPEID_NPEB &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB) ==
-                 IX_FEATURE_CTRL_COMPONENT_DISABLED))
-            {
-                IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified does"
-                                        " not exist\n");
-                return IX_SUCCESS;
-            } /* end of if(npeId) */
-
-            if (npeId == IX_NPEDL_NPEID_NPEC &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC) ==
-                 IX_FEATURE_CTRL_COMPONENT_DISABLED))
-            {
-                IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified does"
-                                        " not exist\n");
-                return IX_SUCCESS;
-            } /* end of if(npeId) */
-        } /* end of if not IXP42x-A0 silicon */
-
-        if (ixNpeDlNpeState[npeId].validImage)
-        {
-            /* use npeId to get imageId from list of currently loaded
-               images */
-            *imageIdPtr = ixNpeDlNpeState[npeId].imageId;
-        }
-        else
-        {
-            status = IX_FAIL;
-        } /* end of if-else(ixNpeDlNpeState) */
-    } /* end of if-else(npeId) */
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Exiting ixNpeDlLoadedImageGet : status = %d\n",
-                     status);
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlLatestImageGet
- */
-PUBLIC IX_STATUS
-ixNpeDlLatestImageGet (
-    IxNpeDlNpeId npeId,
-    IxNpeDlFunctionalityId functionalityId,
-    IxNpeDlImageId *imageIdPtr)
-{
-    IX_STATUS status;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Entering ixNpeDlLatestImageGet\n");
-
-    /* Check input parameters */
-    if ((npeId >= IX_NPEDL_NPEID_MAX) ||
-        (npeId < 0) ||
-        (imageIdPtr == NULL))
-    {
-        status = IX_NPEDL_PARAM_ERR;
-        IX_NPEDL_ERROR_REPORT ("ixNpeDlLatestImageGet - "
-                               "invalid parameter\n");
-    } /* end of if(npeId) */
-    else
-    {
-
-	/* If not IXP42X A0 stepping, proceed to check for existence of npe's */
-	if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 !=
-	     (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-	    || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-        {
-            if (npeId == IX_NPEDL_NPEID_NPEA &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) ==
-                 IX_FEATURE_CTRL_COMPONENT_DISABLED))
-            {
-                IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does"
-                                        " not exist\n");
-                return IX_SUCCESS;
-            } /* end of if(npeId) */
-
-            if (npeId == IX_NPEDL_NPEID_NPEB &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB) ==
-                 IX_FEATURE_CTRL_COMPONENT_DISABLED))
-            {
-                IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified does"
-                                        " not exist\n");
-                return IX_SUCCESS;
-            } /* end of if(npeId) */
-
-            if (npeId == IX_NPEDL_NPEID_NPEC &&
-                (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC) ==
-                 IX_FEATURE_CTRL_COMPONENT_DISABLED))
-            {
-                IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified does"
-                                        " not exist\n");
-                return IX_SUCCESS;
-            } /* end of if(npeId) */
-        } /* end of if not IXP42x-A0 silicon */
-
-        imageIdPtr->npeId = npeId;
-        imageIdPtr->functionalityId = functionalityId;
-        imageIdPtr->major = IMAGEID_MAJOR_NUMBER_DEFAULT;
-        imageIdPtr->minor = IMAGEID_MINOR_NUMBER_DEFAULT;
-        /* Call ImageMgr to get list of images listed in Image Library Header */
-        status = ixNpeDlImageMgrLatestImageExtract(imageIdPtr);
-    } /* end of if-else(npeId) */
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Exiting ixNpeDlLatestImageGet : status = %d\n",
-                     status);
-
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlNpeStopAndReset
- */
-PUBLIC IX_STATUS
-ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId)
-{
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Entering ixNpeDlNpeStopAndReset\n");
-
-    /* Ensure initialisation has been completed */
-    ixNpeDlNpeMgrInit();
-
-    /* If not IXP42X A0 stepping, proceed to check for existence of npe's */
-    if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 !=
-	 (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-	|| (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-    {
-        /*
-         * Check whether NPE is present
-         */
-        if (IX_NPEDL_NPEID_NPEA == npeId)
-        {
-            /* Check whether NPE A is present */
-            if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA)==
-                IX_FEATURE_CTRL_COMPONENT_DISABLED)
-            {
-                /* NPE A does not present */
-                IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeStopAndReset - Warning:NPEA does not present.\n");
-                return IX_SUCCESS;
-            }
-        } /* end of if(IX_NPEDL_NPEID_NPEA) */
-        else if (IX_NPEDL_NPEID_NPEB == npeId)
-        {
-            /* Check whether NPE B is present */
-            if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)==
-                IX_FEATURE_CTRL_COMPONENT_DISABLED)
-            {
-                /* NPE B does not present */
-                IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeStopAndReset - Warning:NPEB does not present.\n");
-                return IX_SUCCESS;
-            }
-        } /* end of elseif(IX_NPEDL_NPEID_NPEB) */
-        else if (IX_NPEDL_NPEID_NPEC == npeId)
-        {
-            /* Check whether NPE C is present */
-            if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)==
-                IX_FEATURE_CTRL_COMPONENT_DISABLED)
-            {
-                /* NPE C does not present */
-                IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeStopAndReset - Warning:NPEC does not present.\n");
-                return IX_SUCCESS;
-            }
-        } /* end of elseif(IX_NPEDL_NPEID_NPEC) */
-        else
-        {
-            /* Invalid NPE ID */
-            IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeStopAndReset - invalid Npe ID\n");
-            status = IX_NPEDL_PARAM_ERR;
-        } /* end of if-else(IX_NPEDL_NPEID_NPEC) */
-    } /* end of if not IXP42x-A0 Silicon */
-
-    if (status == IX_SUCCESS)
-    {
-        /* call NpeMgr function to stop the NPE */
-        status = ixNpeDlNpeMgrNpeStop (npeId);
-        if (status == IX_SUCCESS)
-        {
-            /* call NpeMgr function to reset the NPE */
-            status = ixNpeDlNpeMgrNpeReset (npeId);
-        }
-    } /* end of if(status) */
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Exiting ixNpeDlNpeStopAndReset : status = %d\n", status);
-
-    if (IX_SUCCESS == status)
-    {
-        /* Indicate NPE has been stopped */
-        ixNpeDlNpeStarted[npeId] = false ;
-    }
-
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlNpeExecutionStart
- */
-PUBLIC IX_STATUS
-ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId)
-{
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Entering ixNpeDlNpeExecutionStart\n");
-
-    /* If not IXP42X A0 stepping, proceed to check for existence of npe's */
-    if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 !=
-	 (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-	|| (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-    {
-        /*
-         * Check whether NPE is present
-         */
-        if (IX_NPEDL_NPEID_NPEA == npeId)
-        {
-            /* Check whether NPE A is present */
-            if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA)==
-                IX_FEATURE_CTRL_COMPONENT_DISABLED)
-            {
-                /* NPE A does not present */
-                IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStart - Warning:NPEA does not present.\n");
-                return IX_SUCCESS;
-            }
-        } /* end of if(IX_NPEDL_NPEID_NPEA) */
-        else if (IX_NPEDL_NPEID_NPEB == npeId)
-        {
-            /* Check whether NPE B is present */
-            if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)==
-                IX_FEATURE_CTRL_COMPONENT_DISABLED)
-            {
-                /* NPE B does not present */
-                IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStart - Warning:NPEB does not present.\n");
-                return IX_SUCCESS;
-            }
-        } /* end of elseif(IX_NPEDL_NPEID_NPEB) */
-        else if (IX_NPEDL_NPEID_NPEC ==  npeId)
-        {
-            /* Check whether NPE C is present */
-            if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)==
-                IX_FEATURE_CTRL_COMPONENT_DISABLED)
-            {
-                /* NPE C does not present */
-                IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStart - Warning:NPEC does not present.\n");
-                return IX_SUCCESS;
-            }
-        } /* end of elseif(IX_NPEDL_NPEID_NPEC) */
-        else
-        {
-            /* Invalid NPE ID */
-            IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeExecutionStart - invalid Npe ID\n");
-            return IX_NPEDL_PARAM_ERR;
-        } /* end of if-else(IX_NPEDL_NPEID_NPEC) */
-    } /* end of if not IXP42x-A0 Silicon */
-
-    if (true == ixNpeDlNpeStarted[npeId])
-    {
-        /* NPE has been started. */
-        return IX_SUCCESS ;
-    }
-
-    /* Ensure initialisation has been completed */
-    ixNpeDlNpeMgrInit();
-
-    /* call NpeMgr function to start the NPE */
-    status = ixNpeDlNpeMgrNpeStart (npeId);
-
-    if (IX_SUCCESS == status)
-    {
-        /* Indicate NPE has started */
-        ixNpeDlNpeStarted[npeId] = true ;
-    }
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Exiting ixNpeDlNpeExecutionStart : status = %d\n",
-                     status);
-
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlNpeExecutionStop
- */
-PUBLIC IX_STATUS
-ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId)
-{
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Entering ixNpeDlNpeExecutionStop\n");
-
-    /* Ensure initialisation has been completed */
-    ixNpeDlNpeMgrInit();
-
-    /* If not IXP42X A0 stepping, proceed to check for existence of npe's */
-    if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 !=
-	 (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-	|| (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-    {
-        /*
-         * Check whether NPE is present
-         */
-        if (IX_NPEDL_NPEID_NPEA == npeId)
-        {
-            /* Check whether NPE A is present */
-            if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA)==
-                IX_FEATURE_CTRL_COMPONENT_DISABLED)
-            {
-                /* NPE A does not present */
-                IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStop - Warning:NPEA does not present.\n");
-                return IX_SUCCESS;
-            }
-        } /* end of if(IX_NPEDL_NPEID_NPEA) */
-        else if (IX_NPEDL_NPEID_NPEB == npeId)
-        {
-            /* Check whether NPE B is present */
-            if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)==
-                IX_FEATURE_CTRL_COMPONENT_DISABLED)
-            {
-                /* NPE B does not present */
-                IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStop - Warning:NPEB does not present.\n");
-                return IX_SUCCESS;
-            }
-        } /* end of elseif(IX_NPEDL_NPEID_NPEB) */
-        else if (IX_NPEDL_NPEID_NPEC == npeId)
-        {
-            /* Check whether NPE C is present */
-            if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)==
-                IX_FEATURE_CTRL_COMPONENT_DISABLED)
-            {
-                /* NPE C does not present */
-                IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStop - Warning:NPEC does not present.\n");
-                return IX_SUCCESS;
-            }
-        } /* end of elseif(IX_NPEDL_NPEID_NPEC) */
-        else
-        {
-            /* Invalid NPE ID */
-            IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeExecutionStop - invalid Npe ID\n");
-            status = IX_NPEDL_PARAM_ERR;
-        } /* end of if-else(IX_NPEDL_NPEID_NPEC) */
-    } /* end of if not IXP42X-AO Silicon */
-
-    if (status == IX_SUCCESS)
-    {
-        /* call NpeMgr function to stop the NPE */
-        status = ixNpeDlNpeMgrNpeStop (npeId);
-    }
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Exiting ixNpeDlNpeExecutionStop : status = %d\n",
-                     status);
-
-    if (IX_SUCCESS == status)
-    {
-        /* Indicate NPE has been stopped */
-        ixNpeDlNpeStarted[npeId] = false ;
-    }
-
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlUnload
- */
-PUBLIC IX_STATUS
-ixNpeDlUnload (void)
-{
-    IX_STATUS status;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Entering ixNpeDlUnload\n");
-
-    status = ixNpeDlNpeMgrUninit();
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Exiting ixNpeDlUnload : status = %d\n",
-                     status);
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlStatsShow
- */
-PUBLIC void
-ixNpeDlStatsShow (void)
-{
-    ixOsalLog (IX_OSAL_LOG_LVL_USER,
-               IX_OSAL_LOG_DEV_STDOUT,
-               "\nixNpeDlStatsShow:\n"
-               "\tDownloads Attempted by user: %u\n"
-               "\tSuccessful Downloads: %u\n"
-               "\tFailed Downloads (due to Critical Error): %u\n\n",
-               ixNpeDlStats.attemptedDownloads,
-               ixNpeDlStats.successfulDownloads,
-               ixNpeDlStats.criticalFailDownloads,
-               0,0,0);
-
-    ixNpeDlImageMgrStatsShow ();
-    ixNpeDlNpeMgrStatsShow ();
-}
-
-/*
- * Function definition: ixNpeDlStatsReset
- */
-PUBLIC void
-ixNpeDlStatsReset (void)
-{
-    ixNpeDlStats.attemptedDownloads = 0;
-    ixNpeDlStats.successfulDownloads = 0;
-    ixNpeDlStats.criticalFailDownloads = 0;
-
-    ixNpeDlImageMgrStatsReset ();
-    ixNpeDlNpeMgrStatsReset ();
-}
-
-/*
- * Function definition: ixNpeDlNpeInitAndStartInternal
- */
-PRIVATE IX_STATUS
-ixNpeDlNpeInitAndStartInternal (UINT32 *imageLibrary,
-                                UINT32 imageId)
-{
-    UINT32        imageSize;
-    UINT32       *imageCodePtr  = NULL;
-    IX_STATUS     status;
-    IxNpeDlNpeId  npeId = IX_NPEDL_NPEID_FROM_IMAGEID_GET(imageId);
-    IxFeatureCtrlDeviceId deviceId = IX_NPEDL_DEVICEID_FROM_IMAGEID_GET(imageId);
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Entering ixNpeDlNpeInitAndStartInternal\n");
-
-    ixNpeDlStats.attemptedDownloads++;
-
-    /* Check input parameter device correctness */
-    if ((deviceId >= IX_FEATURE_CTRL_DEVICE_TYPE_MAX) ||
-        (deviceId < IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X))
-    {
-        status = IX_NPEDL_PARAM_ERR;
-        IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeInitAndStartInternal - "
-                               "invalid parameter\n");
-    } /* End valid device id checking */
-
-    /* Check input parameters */
-    else if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0))
-    {
-        status = IX_NPEDL_PARAM_ERR;
-        IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeInitAndStartInternal - "
-                               "invalid parameter\n");
-    }
-
-    else
-    {
-        /* Ensure initialisation has been completed */
-        ixNpeDlNpeMgrInit();
-
-        /* Checking if image being loaded is meant for device that is running.
-         * Image is forward compatible. i.e Image built for IXP42X should run
-         * on IXP46X but not vice versa.*/
-        if (deviceId > (ixFeatureCtrlDeviceRead() & IX_FEATURE_CTRL_DEVICE_TYPE_MASK))
-        {
-            IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeInitAndStartInternal - "
-                                   "Device type mismatch. NPE Image not "
-                                   "meant for device in use \n");
-            return IX_NPEDL_DEVICE_ERR;
-        }/* if statement - matching image device and current device */
-
-	/* If not IXP42X A0 stepping, proceed to check for existence of npe's */
-	if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 !=
-	     (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK))
-	    || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ()))
-        {
-            if (npeId == IX_NPEDL_NPEID_NPEA)
-            {
-                if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) ==
-                    IX_FEATURE_CTRL_COMPONENT_DISABLED)
-                {
-                    IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does"
-                                            " not exist\n");
-                    return IX_SUCCESS;
-                }
-            } /* end of if(npeId) */
-            else if (npeId == IX_NPEDL_NPEID_NPEB)
-            {
-                if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)==
-                    IX_FEATURE_CTRL_COMPONENT_DISABLED)
-                {
-                    IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified"
-                                            " does not exist\n");
-                    return IX_SUCCESS;
-                }
-            } /* end of elseif(npeId) */
-            else if (npeId == IX_NPEDL_NPEID_NPEC)
-            {
-                if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)==
-                    IX_FEATURE_CTRL_COMPONENT_DISABLED)
-                {
-                    IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified"
-                                            " does not exist\n");
-                    return IX_SUCCESS;
-                }
-            } /* end of elseif(npeId) */
-        } /* end of if not IXP42X-A0 Silicon */
-
-        /* stop and reset the NPE */
-        status = ixNpeDlNpeStopAndReset (npeId);
-        if (IX_SUCCESS != status)
-        {
-            IX_NPEDL_ERROR_REPORT ("Failed to stop and reset NPE\n");
-            return status;
-        }
-
-        /* Locate image */
-        status = ixNpeDlImageMgrImageFind (imageLibrary, imageId,
-                                           &imageCodePtr, &imageSize);
-        if (IX_SUCCESS == status)
-        {
-            /*
-             * If download was successful, store image Id in list of
-             * currently loaded images. If a critical error occured
-             * during download, record that the NPE has an invalid image
-             */
-            status = ixNpeDlNpeMgrImageLoad (npeId, imageCodePtr, true);
-            if (IX_SUCCESS == status)
-            {
-                ixNpeDlNpeState[npeId].validImage = true;
-                ixNpeDlStats.successfulDownloads++;
-
-                status = ixNpeDlNpeExecutionStart (npeId);
-            }
-            else if ((status == IX_NPEDL_CRITICAL_NPE_ERR) ||
-                     (status == IX_NPEDL_CRITICAL_MICROCODE_ERR))
-            {
-                ixNpeDlNpeState[npeId].validImage = false;
-                ixNpeDlStats.criticalFailDownloads++;
-            }
-
-            /* NOTE - The following section of code is here to support
-             * a deprecated function ixNpeDlLoadedImageGet().  When that
-             * function is removed from the API, this code should be revised.
-             */
-            ixNpeDlNpeState[npeId].imageId.npeId = npeId;
-            ixNpeDlNpeState[npeId].imageId.functionalityId =
-                IX_NPEDL_FUNCTIONID_FROM_IMAGEID_GET(imageId);
-            ixNpeDlNpeState[npeId].imageId.major =
-                IX_NPEDL_MAJOR_FROM_IMAGEID_GET(imageId);
-            ixNpeDlNpeState[npeId].imageId.minor =
-                IX_NPEDL_MINOR_FROM_IMAGEID_GET(imageId);
-        } /* end of if(IX_SUCCESS) */ /* condition: image located successfully in microcode image */
-    } /* end of if-else(npeId-deviceId) */ /* condition: parameter checks ok */
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-                     "Exiting ixNpeDlNpeInitAndStartInternal : "
-                     "status = %d\n", status);
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlCustomImageNpeInitAndStart
- */
-PUBLIC IX_STATUS
-ixNpeDlCustomImageNpeInitAndStart (UINT32 *imageLibrary,
-                                   UINT32 imageId)
-{
-    IX_STATUS status;
-
-    if (imageLibrary == NULL)
-    {
-        status = IX_NPEDL_PARAM_ERR;
-        IX_NPEDL_ERROR_REPORT ("ixNpeDlCustomImageNpeInitAndStart "
-                               "- invalid parameter\n");
-    }
-    else
-    {
-        status = ixNpeDlNpeInitAndStartInternal (imageLibrary, imageId);
-    } /* end of if-else(imageLibrary) */
-
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlNpeInitAndStart
- */
-PUBLIC IX_STATUS
-ixNpeDlNpeInitAndStart (UINT32 imageId)
-{
-    return ixNpeDlNpeInitAndStartInternal (NULL, imageId);
-}
-
-/*
- * Function definition: ixNpeDlLoadedImageFunctionalityGet
- */
-PUBLIC IX_STATUS
-ixNpeDlLoadedImageFunctionalityGet (IxNpeDlNpeId npeId,
-                                    UINT8 *functionalityId)
-{
-    /* Check input parameters */
-    if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0))
-    {
-        IX_NPEDL_ERROR_REPORT ("ixNpeDlLoadedImageFunctionalityGet "
-                               "- invalid parameter\n");
-        return IX_NPEDL_PARAM_ERR;
-    }
-    if (functionalityId == NULL)
-    {
-        IX_NPEDL_ERROR_REPORT ("ixNpeDlLoadedImageFunctionalityGet "
-                               "- invalid parameter\n");
-        return IX_NPEDL_PARAM_ERR;
-    }
-
-    if (ixNpeDlNpeState[npeId].validImage)
-    {
-        *functionalityId = ixNpeDlNpeState[npeId].imageId.functionalityId;
-        return IX_SUCCESS;
-    }
-    else
-    {
-        return IX_FAIL;
-    }
-}
diff --git a/drivers/net/npe/IxNpeDlImageMgr.c b/drivers/net/npe/IxNpeDlImageMgr.c
deleted file mode 100644
index 52f73d7..0000000
--- a/drivers/net/npe/IxNpeDlImageMgr.c
+++ /dev/null
@@ -1,663 +0,0 @@
-/**
- * @file IxNpeDlImageMgr.c
- *
- * @author Intel Corporation
- * @date 09 January 2002
- *
- * @brief This file contains the implementation of the private API for the 
- *        IXP425 NPE Downloader ImageMgr module
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-
-/*
- * Put the system defined include files required.
- */
-#include "IxOsal.h"
-
-/*
- * Put the user defined include files required.
- */
-#include "IxNpeDlImageMgr_p.h"
-#include "IxNpeDlMacros_p.h"
-
-/*
- * define the flag which toggles the firmare inclusion
- */
-#define IX_NPE_MICROCODE_FIRMWARE_INCLUDED 1
-#include "IxNpeMicrocode.h"
-
-/*
- * Indicates the start of an NPE Image, in new NPE Image Library format.
- * 2 consecutive occurances indicates the end of the NPE Image Library
- */
-#define NPE_IMAGE_MARKER 0xfeedf00d
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/*
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * TO BE DEPRECATED IN A FUTURE RELEASE
- */
-typedef struct
-{
-    UINT32 size;
-    UINT32 offset;
-    UINT32 id;
-} IxNpeDlImageMgrImageEntry;
-
-/*
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * TO BE DEPRECATED IN A FUTURE RELEASE
- */
-typedef union
-{
-    IxNpeDlImageMgrImageEntry image;
-    UINT32 eohMarker;
-} IxNpeDlImageMgrHeaderEntry;
-
-/*
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * TO BE DEPRECATED IN A FUTURE RELEASE
- */
-typedef struct
-{
-    UINT32 signature;
-    /* 1st entry in the header (there may be more than one) */
-    IxNpeDlImageMgrHeaderEntry entry[1];
-} IxNpeDlImageMgrImageLibraryHeader;
-
-
-/*
- * NPE Image Header definition, used in new NPE Image Library format
- */
-typedef struct
-{
-    UINT32 marker;
-    UINT32 id;
-    UINT32 size;
-} IxNpeDlImageMgrImageHeader;
-
-/* module statistics counters */
-typedef struct
-{
-    UINT32 invalidSignature;
-    UINT32 imageIdListOverflow;
-    UINT32 imageIdNotFound;
-} IxNpeDlImageMgrStats;
-
-
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-static IxNpeDlImageMgrStats ixNpeDlImageMgrStats;
-
-static UINT32* getIxNpeMicroCodeImageLibrary(void)
-{
-	char *s;
-
-	if ((s = getenv("npe_ucode")) != NULL)
-		return (UINT32*) simple_strtoul(s, NULL, 16);
-	else
-		return NULL;
-}
-
-/*
- * static function prototypes.
- */
-PRIVATE BOOL
-ixNpeDlImageMgrSignatureCheck (UINT32 *microCodeImageLibrary);
-
-PRIVATE void  
-ixNpeDlImageMgrImageIdFormat (UINT32 rawImageId, IxNpeDlImageId *imageId);
-
-PRIVATE BOOL
-ixNpeDlImageMgrImageIdCompare (IxNpeDlImageId *imageIdA, 
-				 IxNpeDlImageId *imageIdB);
-				 
-PRIVATE BOOL
-ixNpeDlImageMgrNpeFunctionIdCompare (IxNpeDlImageId *imageIdA,
-				       IxNpeDlImageId *imageIdB);
-
-#if 0
-PRIVATE IX_STATUS
-ixNpeDlImageMgrImageFind_legacy (UINT32 *imageLibrary,
-                                 UINT32 imageId,
-                                 UINT32 **imagePtr,
-                                 UINT32 *imageSize);
-
-/*
- * Function definition: ixNpeDlImageMgrMicrocodeImageLibraryOverride
- *
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE
- */
-IX_STATUS
-ixNpeDlImageMgrMicrocodeImageLibraryOverride (
-    UINT32 *clientImageLibrary)
-{
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, 
-		     "Entering ixNpeDlImageMgrMicrocodeImageLibraryOverride\n");
-
-    if (ixNpeDlImageMgrSignatureCheck (clientImageLibrary))
-    {
-	IxNpeMicroCodeImageLibrary = clientImageLibrary;
-    }
-    else
-    {
-	IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrMicrocodeImageLibraryOverride: "
-			       "Client-supplied image has invalid signature\n");
-	status = IX_FAIL;
-    }
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, 
-		     "Exiting ixNpeDlImageMgrMicrocodeImageLibraryOverride: status = %d\n",
-		     status);
-    return status;
-}
-#endif
-
-/*
- * Function definition: ixNpeDlImageMgrImageListExtract
- *
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE
- */
-IX_STATUS
-ixNpeDlImageMgrImageListExtract (
-    IxNpeDlImageId *imageListPtr,
-    UINT32 *numImages)
-{
-    UINT32 rawImageId;
-    IxNpeDlImageId formattedImageId;
-    IX_STATUS status = IX_SUCCESS;
-    UINT32 imageCount = 0;
-    IxNpeDlImageMgrImageLibraryHeader *header;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, 
-		     "Entering ixNpeDlImageMgrImageListExtract\n");
-
-    header = (IxNpeDlImageMgrImageLibraryHeader *) getIxNpeMicroCodeImageLibrary();
-
-    if (ixNpeDlImageMgrSignatureCheck (getIxNpeMicroCodeImageLibrary()))
-    {
-	/* for each image entry in the image header ... */
-	while (header->entry[imageCount].eohMarker !=
-	       IX_NPEDL_IMAGEMGR_END_OF_HEADER)
-	{
-	    /*
-	     * if the image list container from calling function has capacity,
-	     * add the image id to the list 
-	     */
-	    if ((imageListPtr != NULL) && (imageCount < *numImages))
-	    {
-		rawImageId = header->entry[imageCount].image.id;
-	        ixNpeDlImageMgrImageIdFormat (rawImageId, &formattedImageId);
-		imageListPtr[imageCount] = formattedImageId;
-	    }
-	    /* imageCount reflects no. of image entries in image library header */
-	    imageCount++;  
-	}
-	
-	/*
-	 * if image list container from calling function was too small to
-	 * contain all image ids in the header, set return status to FAIL
-	 */
-	if ((imageListPtr != NULL) && (imageCount > *numImages))
-	{
-	    status = IX_FAIL;
-	    IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageListExtract: "
-				   "number of Ids found exceeds list capacity\n");
-	    ixNpeDlImageMgrStats.imageIdListOverflow++;
-	}
-	/* return number of image ids found in image library header */
-	*numImages = imageCount;  
-    }
-    else
-    {
-	status = IX_FAIL;
-	IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageListExtract: "
-			       "invalid signature in image\n");
-    }
-    
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, 
-		     "Exiting ixNpeDlImageMgrImageListExtract: status = %d\n",
-		     status);
-    return status;
-}
-
-
-/*
- * Function definition: ixNpeDlImageMgrImageLocate
- *
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE
- */
-IX_STATUS
-ixNpeDlImageMgrImageLocate (
-    IxNpeDlImageId *imageId,
-    UINT32 **imagePtr,
-    UINT32 *imageSize)
-{
-    UINT32 imageOffset;
-    UINT32 rawImageId;
-    IxNpeDlImageId formattedImageId;
-    /* used to index image entries in image library header */
-    UINT32 imageCount = 0;   
-    IX_STATUS status = IX_FAIL;
-    IxNpeDlImageMgrImageLibraryHeader *header;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlImageMgrImageLocate\n");
-
-    header = (IxNpeDlImageMgrImageLibraryHeader *) getIxNpeMicroCodeImageLibrary();
-
-    if (ixNpeDlImageMgrSignatureCheck (getIxNpeMicroCodeImageLibrary()))
-    {
-	/* for each image entry in the image library header ... */
-	while (header->entry[imageCount].eohMarker !=
-	       IX_NPEDL_IMAGEMGR_END_OF_HEADER)
-	{
-	    rawImageId = header->entry[imageCount].image.id;
-	    ixNpeDlImageMgrImageIdFormat (rawImageId, &formattedImageId);
-	    /* if a match for imageId is found in the image library header... */
-	    if (ixNpeDlImageMgrImageIdCompare (imageId, &formattedImageId))
-	    {
-		/*
-		 * get pointer to the image in the image library using offset from
-		 * 1st word in image library
-		 */
-		UINT32 *tmp=getIxNpeMicroCodeImageLibrary();
-		imageOffset = header->entry[imageCount].image.offset;
-		*imagePtr = &tmp[imageOffset];
-		/* get the image size */
-		*imageSize = header->entry[imageCount].image.size;
-		status = IX_SUCCESS;
-		break;
-	    }
-	    imageCount++;
-	}
-	if (status != IX_SUCCESS)
-	{
-	    IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageLocate: "
-				   "imageId not found in image library header\n");
-	    ixNpeDlImageMgrStats.imageIdNotFound++;
-	}
-    }
-    else
-    {
-	IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageLocate: "
-			       "invalid signature in image library\n");
-    }
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlImageMgrImageLocate: status = %d\n", status);
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlImageMgrLatestImageExtract
- *
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE
- */
-IX_STATUS
-ixNpeDlImageMgrLatestImageExtract (IxNpeDlImageId *imageId)
-{
-    UINT32 imageCount = 0; 
-    UINT32 rawImageId;
-    IxNpeDlImageId formattedImageId;
-    IX_STATUS status = IX_FAIL;
-    IxNpeDlImageMgrImageLibraryHeader *header;
-    
-    
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlImageMgrLatestImageExtract\n");
-		     
-    header = (IxNpeDlImageMgrImageLibraryHeader *) getIxNpeMicroCodeImageLibrary();
-    
-    if (ixNpeDlImageMgrSignatureCheck (getIxNpeMicroCodeImageLibrary()))
-    {
-	/* for each image entry in the image library header ... */
-	while (header->entry[imageCount].eohMarker !=
-	       IX_NPEDL_IMAGEMGR_END_OF_HEADER)
-	{
-	    rawImageId = header->entry[imageCount].image.id;
-	    ixNpeDlImageMgrImageIdFormat (rawImageId, &formattedImageId);
-	    /* 
-	     * if a match for the npe Id and functionality Id of the imageId is
-	     *  found in the image library header... 
-	     */
-            if(ixNpeDlImageMgrNpeFunctionIdCompare(imageId, &formattedImageId))
-            {
-                if(imageId->major <= formattedImageId.major)
-                {
-                    if(imageId->minor < formattedImageId.minor)
-                    {
-                        imageId->minor = formattedImageId.minor;
-                    }
-                    imageId->major = formattedImageId.major;
-                }
-                status = IX_SUCCESS;
-            }
-            imageCount++;
-	}
-	if (status != IX_SUCCESS)
-	{
-	    IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrLatestImageExtract: "
-				   "imageId not found in image library header\n");
-	    ixNpeDlImageMgrStats.imageIdNotFound++;
-	}
-    }
-    else
-    {
-	IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrLatestImageGet: "
-			       "invalid signature in image library\n");
-    }
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlImageMgrLatestImageGet: status = %d\n", status);
-    return status;
-}
-
-/*
- * Function definition: ixNpeDlImageMgrSignatureCheck
- *
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE
- */
-PRIVATE BOOL
-ixNpeDlImageMgrSignatureCheck (UINT32 *microCodeImageLibrary)
-{
-    IxNpeDlImageMgrImageLibraryHeader *header =
-	(IxNpeDlImageMgrImageLibraryHeader *) microCodeImageLibrary;
-    BOOL result = true;
-
-    if (!header || header->signature != IX_NPEDL_IMAGEMGR_SIGNATURE)
-    {
-	result = false;
-	ixNpeDlImageMgrStats.invalidSignature++;
-    }
-
-    return result;
-}
-
-
-/*
- * Function definition: ixNpeDlImageMgrImageIdFormat
- *
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE
- */
-PRIVATE void
-ixNpeDlImageMgrImageIdFormat (
-    UINT32 rawImageId, 
-    IxNpeDlImageId *imageId)
-{  
-    imageId->npeId = (rawImageId >>
-				IX_NPEDL_IMAGEID_NPEID_OFFSET) &
-	IX_NPEDL_NPEIMAGE_FIELD_MASK;
-    imageId->functionalityId = (rawImageId >> 
-				  IX_NPEDL_IMAGEID_FUNCTIONID_OFFSET) &
-	IX_NPEDL_NPEIMAGE_FIELD_MASK;
-    imageId->major = (rawImageId >>
-				IX_NPEDL_IMAGEID_MAJOR_OFFSET) &
-	IX_NPEDL_NPEIMAGE_FIELD_MASK;
-    imageId->minor = (rawImageId >>
-				IX_NPEDL_IMAGEID_MINOR_OFFSET) &
-	IX_NPEDL_NPEIMAGE_FIELD_MASK;
-
-}
-
-
-/*
- * Function definition: ixNpeDlImageMgrImageIdCompare
- *
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE
- */
-PRIVATE BOOL
-ixNpeDlImageMgrImageIdCompare (
-    IxNpeDlImageId *imageIdA,
-    IxNpeDlImageId *imageIdB)
-{
-    if ((imageIdA->npeId   == imageIdB->npeId)   &&
-	(imageIdA->functionalityId == imageIdB->functionalityId) &&
-	(imageIdA->major   == imageIdB->major)   &&
-	(imageIdA->minor   == imageIdB->minor))
-    {
-	return true;
-    }
-    else
-    {
-	return false;
-    }
-}
-
-/*
- * Function definition: ixNpeDlImageMgrNpeFunctionIdCompare
- *
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE
- */
-PRIVATE BOOL
-ixNpeDlImageMgrNpeFunctionIdCompare (
-    IxNpeDlImageId *imageIdA,
-    IxNpeDlImageId *imageIdB)
-{
-    if ((imageIdA->npeId   == imageIdB->npeId)   &&
-	(imageIdA->functionalityId == imageIdB->functionalityId))
-    {
-	return true;
-    }
-    else
-    {
-	return false;
-    }
-}
-
-
-/*
- * Function definition: ixNpeDlImageMgrStatsShow
- */
-void
-ixNpeDlImageMgrStatsShow (void)
-{
-    ixOsalLog (IX_OSAL_LOG_LVL_USER,
-               IX_OSAL_LOG_DEV_STDOUT,
-               "\nixNpeDlImageMgrStatsShow:\n"
-               "\tInvalid Image Signatures: %u\n"
-               "\tImage Id List capacity too small: %u\n"
-               "\tImage Id not found: %u\n\n",
-               ixNpeDlImageMgrStats.invalidSignature,
-               ixNpeDlImageMgrStats.imageIdListOverflow,
-               ixNpeDlImageMgrStats.imageIdNotFound,
-               0,0,0);
-}
-
-
-/*
- * Function definition: ixNpeDlImageMgrStatsReset
- */
-void
-ixNpeDlImageMgrStatsReset (void)
-{
-    ixNpeDlImageMgrStats.invalidSignature = 0;
-    ixNpeDlImageMgrStats.imageIdListOverflow = 0;
-    ixNpeDlImageMgrStats.imageIdNotFound = 0;
-}
-
-
-#if 0
-/*
- * Function definition: ixNpeDlImageMgrImageFind_legacy
- *
- * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT
- * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE
- */
-PRIVATE IX_STATUS
-ixNpeDlImageMgrImageFind_legacy (
-    UINT32 *imageLibrary,
-    UINT32 imageId,
-    UINT32 **imagePtr,
-    UINT32 *imageSize)
-{
-    UINT32 imageOffset;
-    /* used to index image entries in image library header */
-    UINT32 imageCount = 0;   
-    IX_STATUS status = IX_FAIL;
-    IxNpeDlImageMgrImageLibraryHeader *header;
-    BOOL imageFound = false;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlImageMgrImageFind\n");
-
-
-    /* If user didn't specify a library to use, use the default
-     * one from IxNpeMicrocode.h
-     */
-    if (imageLibrary == NULL)
-    {
-	imageLibrary = IxNpeMicroCodeImageLibrary;
-    }
-    
-    if (ixNpeDlImageMgrSignatureCheck (imageLibrary))
-    {
-	header = (IxNpeDlImageMgrImageLibraryHeader *) imageLibrary;
-    
-	/* for each image entry in the image library header ... */
-	while ((header->entry[imageCount].eohMarker !=
-               IX_NPEDL_IMAGEMGR_END_OF_HEADER) && !(imageFound))
-	{
-	    /* if a match for imageId is found in the image library header... */
-	    if (imageId == header->entry[imageCount].image.id)
-	    {
-		/*
-		 * get pointer to the image in the image library using offset from
-		 * 1st word in image library
-		 */
-		imageOffset = header->entry[imageCount].image.offset;
-		*imagePtr = &imageLibrary[imageOffset];
-		/* get the image size */
-		*imageSize = header->entry[imageCount].image.size;
-		status = IX_SUCCESS;
-		imageFound = true;
-	    }
-	    imageCount++;
-	}
-	if (status != IX_SUCCESS)
-	{
-	    IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: "
-				   "imageId not found in image library header\n");
-	    ixNpeDlImageMgrStats.imageIdNotFound++;
-	}
-    }
-    else
-    {
-	IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: "
-			       "invalid signature in image library\n");
-    }
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlImageMgrImageFind: status = %d\n", status);
-    return status;
-}
-#endif
-
-/*
- * Function definition: ixNpeDlImageMgrImageFind
- */
-IX_STATUS
-ixNpeDlImageMgrImageFind (
-    UINT32 *imageLibrary,
-    UINT32 imageId,
-    UINT32 **imagePtr,
-    UINT32 *imageSize)
-{
-    IxNpeDlImageMgrImageHeader *image;
-    UINT32 offset = 0;
-
-    /* If user didn't specify a library to use, use the default
-     * one from IxNpeMicrocode.h
-     */
-    if (imageLibrary == NULL)
-    {
-#ifdef IX_NPEDL_READ_MICROCODE_FROM_FILE
-	if (ixNpeMicrocode_binaryArray == NULL)
-        {
-	    printk (KERN_ERR "ixp400.o:  ERROR, no Microcode found in memory\n");
-	    return IX_FAIL;
-	}
-	else
-	{
-	    imageLibrary = ixNpeMicrocode_binaryArray;
-	}
-#else
-	imageLibrary = getIxNpeMicroCodeImageLibrary();
-	if (imageLibrary == NULL)
-        {
-	    printf ("npe:  ERROR, no Microcode found in memory\n");
-	    return IX_FAIL;
-	}
-#endif /* IX_NPEDL_READ_MICROCODE_FROM_FILE */
-    }
-
-#if 0
-    /* For backward's compatibility with previous image format */
-    if (ixNpeDlImageMgrSignatureCheck(imageLibrary))
-    {
-        return ixNpeDlImageMgrImageFind_legacy(imageLibrary,
-                                               imageId,
-                                               imagePtr,
-                                               imageSize);
-    }
-#endif
-
-    while (*(imageLibrary+offset) == NPE_IMAGE_MARKER)
-    {
-        image = (IxNpeDlImageMgrImageHeader *)(imageLibrary+offset);
-        offset += sizeof(IxNpeDlImageMgrImageHeader)/sizeof(UINT32);
-        
-        if (image->id == imageId)
-        {
-            *imagePtr = imageLibrary + offset;
-            *imageSize = image->size;
-            return IX_SUCCESS;
-        }
-        /* 2 consecutive NPE_IMAGE_MARKER's indicates end of library */
-        else if (image->id == NPE_IMAGE_MARKER)
-        {
-	    IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: "
-				   "imageId not found in image library header\n");
-	    ixNpeDlImageMgrStats.imageIdNotFound++;
-            /* reached end of library, image not found */
-            return IX_FAIL;
-        }
-        offset += image->size;
-    }
-
-    /* If we get here, our image library may be corrupted */
-    IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: "
-                           "image library format may be invalid or corrupted\n");
-    return IX_FAIL;
-}
-
diff --git a/drivers/net/npe/IxNpeDlNpeMgr.c b/drivers/net/npe/IxNpeDlNpeMgr.c
deleted file mode 100644
index 8d94dfa..0000000
--- a/drivers/net/npe/IxNpeDlNpeMgr.c
+++ /dev/null
@@ -1,907 +0,0 @@
-/**
- * @file IxNpeDlNpeMgr.c
- *
- * @author Intel Corporation
- * @date 09 January 2002
- *
- * @brief This file contains the implementation of the private API for the
- *        IXP425 NPE Downloader NpeMgr module
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-
-/*
- * Put the user defined include files required.
- */
-#include "IxOsal.h"
-#include "IxNpeDl.h"
-#include "IxNpeDlNpeMgr_p.h"
-#include "IxNpeDlNpeMgrUtils_p.h"
-#include "IxNpeDlNpeMgrEcRegisters_p.h"
-#include "IxNpeDlMacros_p.h"
-#include "IxFeatureCtrl.h"
-
-/*
- * #defines and macros used in this file.
- */
-#define IX_NPEDL_BYTES_PER_WORD                   4
-
-/* used to read download map from version in microcode image */
-#define IX_NPEDL_BLOCK_TYPE_INSTRUCTION           0x00000000
-#define IX_NPEDL_BLOCK_TYPE_DATA                  0x00000001
-#define IX_NPEDL_BLOCK_TYPE_STATE                 0x00000002
-#define IX_NPEDL_END_OF_DOWNLOAD_MAP              0x0000000F
-
-/*
- * masks used to extract address info from State information context
- * register addresses as read from microcode image 
- */
-#define IX_NPEDL_MASK_STATE_ADDR_CTXT_REG         0x0000000F
-#define IX_NPEDL_MASK_STATE_ADDR_CTXT_NUM         0x000000F0
-
-/* LSB offset of Context Number field in State-Info Context Address */
-#define IX_NPEDL_OFFSET_STATE_ADDR_CTXT_NUM       4
-
-/* size (in words) of single State Information entry (ctxt reg address|data) */
-#define IX_NPEDL_STATE_INFO_ENTRY_SIZE            2
-
-
- #define IX_NPEDL_RESET_NPE_PARITY  0x0800
- #define IX_NPEDL_PARITY_BIT_MASK   0x3F00FFFF
- #define IX_NPEDL_CONFIG_CTRL_REG_MASK  0x3F3FFFFF
-
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-typedef struct
-{
-    UINT32 type;
-    UINT32 offset;
-} IxNpeDlNpeMgrDownloadMapBlockEntry;
-
-typedef union
-{
-    IxNpeDlNpeMgrDownloadMapBlockEntry block;
-    UINT32 eodmMarker;
-} IxNpeDlNpeMgrDownloadMapEntry;
-
-typedef struct
-{
-    /* 1st entry in the download map (there may be more than one) */
-    IxNpeDlNpeMgrDownloadMapEntry entry[1];
-} IxNpeDlNpeMgrDownloadMap;
-
-
-/* used to access an instruction or data block in a microcode image */
-typedef struct
-{
-    UINT32 npeMemAddress;
-    UINT32 size;
-    UINT32 data[1];
-} IxNpeDlNpeMgrCodeBlock;
-
-/* used to access each Context Reg entry state-information block */
-typedef struct
-{
-    UINT32 addressInfo;
-    UINT32 value;
-} IxNpeDlNpeMgrStateInfoCtxtRegEntry;
-
-/* used to access a state-information block in a microcode image */
-typedef struct
-{
-    UINT32 size;
-    IxNpeDlNpeMgrStateInfoCtxtRegEntry ctxtRegEntry[1];
-} IxNpeDlNpeMgrStateInfoBlock;
- 
-/* used to store some useful NPE information for easy access */
-typedef struct
-{
-    UINT32 baseAddress;
-    UINT32 insMemSize;
-    UINT32 dataMemSize;
-} IxNpeDlNpeInfo;
-
-/* used to distinguish instruction and data memory operations */
-typedef enum 
-{
-  IX_NPEDL_MEM_TYPE_INSTRUCTION = 0,
-  IX_NPEDL_MEM_TYPE_DATA
-} IxNpeDlNpeMemType;
-
-/* used to hold a reset value for a particular ECS register */
-typedef struct
-{
-    UINT32 regAddr;
-    UINT32 regResetVal;
-} IxNpeDlEcsRegResetValue;
-
-/* prototype of function to write either Instruction or Data memory */
-typedef IX_STATUS (*IxNpeDlNpeMgrMemWrite) (UINT32 npeBaseAddress,
-					    UINT32 npeMemAddress,
-					    UINT32 npeMemData,
-					    BOOL verify);
-
-/* module statistics counters */
-typedef struct
-{
-    UINT32 instructionBlocksLoaded;
-    UINT32 dataBlocksLoaded;
-    UINT32 stateInfoBlocksLoaded;
-    UINT32 criticalNpeErrors;
-    UINT32 criticalMicrocodeErrors;
-    UINT32 npeStarts;
-    UINT32 npeStops;
-    UINT32 npeResets;
-} IxNpeDlNpeMgrStats;
-
-
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-static IxNpeDlNpeInfo ixNpeDlNpeInfo[] =
-{
-    {
-	0,
-	IX_NPEDL_INS_MEMSIZE_WORDS_NPEA,
-	IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA
-    },
-    {
-	0,
-	IX_NPEDL_INS_MEMSIZE_WORDS_NPEB,
-	IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB
-    },
-    {
-	0,
-	IX_NPEDL_INS_MEMSIZE_WORDS_NPEC,
-	IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC
-    }
-};
-
-/* contains Reset values for Context Store Registers  */
-static UINT32 ixNpeDlCtxtRegResetValues[] =
-{
-    IX_NPEDL_CTXT_REG_RESET_STEVT,
-    IX_NPEDL_CTXT_REG_RESET_STARTPC,
-    IX_NPEDL_CTXT_REG_RESET_REGMAP,
-    IX_NPEDL_CTXT_REG_RESET_CINDEX,
-};
-
-/* contains Reset values for Context Store Registers  */
-static IxNpeDlEcsRegResetValue ixNpeDlEcsRegResetValues[] =
-{
-    {IX_NPEDL_ECS_BG_CTXT_REG_0,    IX_NPEDL_ECS_BG_CTXT_REG_0_RESET},
-    {IX_NPEDL_ECS_BG_CTXT_REG_1,    IX_NPEDL_ECS_BG_CTXT_REG_1_RESET},
-    {IX_NPEDL_ECS_BG_CTXT_REG_2,    IX_NPEDL_ECS_BG_CTXT_REG_2_RESET},
-    {IX_NPEDL_ECS_PRI_1_CTXT_REG_0, IX_NPEDL_ECS_PRI_1_CTXT_REG_0_RESET},
-    {IX_NPEDL_ECS_PRI_1_CTXT_REG_1, IX_NPEDL_ECS_PRI_1_CTXT_REG_1_RESET},
-    {IX_NPEDL_ECS_PRI_1_CTXT_REG_2, IX_NPEDL_ECS_PRI_1_CTXT_REG_2_RESET},
-    {IX_NPEDL_ECS_PRI_2_CTXT_REG_0, IX_NPEDL_ECS_PRI_2_CTXT_REG_0_RESET},
-    {IX_NPEDL_ECS_PRI_2_CTXT_REG_1, IX_NPEDL_ECS_PRI_2_CTXT_REG_1_RESET},
-    {IX_NPEDL_ECS_PRI_2_CTXT_REG_2, IX_NPEDL_ECS_PRI_2_CTXT_REG_2_RESET},
-    {IX_NPEDL_ECS_DBG_CTXT_REG_0,   IX_NPEDL_ECS_DBG_CTXT_REG_0_RESET},
-    {IX_NPEDL_ECS_DBG_CTXT_REG_1,   IX_NPEDL_ECS_DBG_CTXT_REG_1_RESET},
-    {IX_NPEDL_ECS_DBG_CTXT_REG_2,   IX_NPEDL_ECS_DBG_CTXT_REG_2_RESET},
-    {IX_NPEDL_ECS_INSTRUCT_REG,     IX_NPEDL_ECS_INSTRUCT_REG_RESET}
-};
-
-static IxNpeDlNpeMgrStats ixNpeDlNpeMgrStats;
-
-/* Set when NPE register memory has been mapped */
-static BOOL ixNpeDlMemInitialised = false;
-
-
-/*
- * static function prototypes.
- */
-PRIVATE IX_STATUS
-ixNpeDlNpeMgrMemLoad (IxNpeDlNpeId npeId, UINT32 npeBaseAddress,
-		      IxNpeDlNpeMgrCodeBlock *codeBlockPtr,
-		      BOOL verify, IxNpeDlNpeMemType npeMemType);
-PRIVATE IX_STATUS
-ixNpeDlNpeMgrStateInfoLoad (UINT32 npeBaseAddress,
-			    IxNpeDlNpeMgrStateInfoBlock *codeBlockPtr,
-			    BOOL verify);
-PRIVATE BOOL
-ixNpeDlNpeMgrBitsSetCheck (UINT32 npeBaseAddress, UINT32 regOffset,
-			   UINT32 expectedBitsSet);
-
-PRIVATE UINT32
-ixNpeDlNpeMgrBaseAddressGet (IxNpeDlNpeId npeId);
-
-/*
- * Function definition: ixNpeDlNpeMgrBaseAddressGet
- */
-PRIVATE UINT32
-ixNpeDlNpeMgrBaseAddressGet (IxNpeDlNpeId npeId)
-{
-    IX_OSAL_ASSERT (ixNpeDlMemInitialised);
-    return ixNpeDlNpeInfo[npeId].baseAddress;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrInit
- */
-void
-ixNpeDlNpeMgrInit (void)
-{
-    /* Only map the memory once */
-    if (!ixNpeDlMemInitialised)
-    {
-	UINT32 virtAddr;
-
-	/* map the register memory for NPE-A */
-	virtAddr = (UINT32) IX_OSAL_MEM_MAP (IX_NPEDL_NPEBASEADDRESS_NPEA,
-					    IX_OSAL_IXP400_NPEA_MAP_SIZE); 
-	IX_OSAL_ASSERT(virtAddr);
-	ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEA].baseAddress = virtAddr;
-
-	/* map the register memory for NPE-B */
-	virtAddr = (UINT32) IX_OSAL_MEM_MAP (IX_NPEDL_NPEBASEADDRESS_NPEB,
-					    IX_OSAL_IXP400_NPEB_MAP_SIZE); 
-	IX_OSAL_ASSERT(virtAddr);
-	ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress = virtAddr;
-
-	/* map the register memory for NPE-C */
-	virtAddr = (UINT32) IX_OSAL_MEM_MAP (IX_NPEDL_NPEBASEADDRESS_NPEC,
-					    IX_OSAL_IXP400_NPEC_MAP_SIZE); 
-	IX_OSAL_ASSERT(virtAddr);
-	ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress = virtAddr;
-
-	ixNpeDlMemInitialised = true;
-    }
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrUninit
- */
-IX_STATUS
-ixNpeDlNpeMgrUninit (void)
-{
-    if (!ixNpeDlMemInitialised)
-    {
-	return IX_FAIL;
-    }
-
-    IX_OSAL_MEM_UNMAP (ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEA].baseAddress);
-    IX_OSAL_MEM_UNMAP (ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress);
-    IX_OSAL_MEM_UNMAP (ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress);
-
-    ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEA].baseAddress = 0;
-    ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress = 0;
-    ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress = 0;
-
-    ixNpeDlMemInitialised = false;
-
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeDlNpeMgrImageLoad
- */
-IX_STATUS
-ixNpeDlNpeMgrImageLoad (
-    IxNpeDlNpeId npeId,
-    UINT32 *imageCodePtr,
-    BOOL verify)
-{
-    UINT32 npeBaseAddress;
-    IxNpeDlNpeMgrDownloadMap *downloadMap;
-    UINT32 *blockPtr;
-    UINT32 mapIndex = 0;
-    IX_STATUS status = IX_SUCCESS;
-    
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlNpeMgrImageLoad\n");
-
-    /* get base memory address of NPE from npeId */
-    npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId);
-
-    /* check execution status of NPE to verify NPE Stop was successful */
-    if (!ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL,
-				    IX_NPEDL_EXCTL_STATUS_STOP))
-    {
-	IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrImageDownload - "
-			       "NPE was not stopped before download\n");
-	status = IX_FAIL;
-    }
-    else
-    {
-	/*
-	 * Read Download Map, checking each block type and calling
-	 * appropriate function to perform download 
-	 */
-	downloadMap = (IxNpeDlNpeMgrDownloadMap *) imageCodePtr;
-	while ((downloadMap->entry[mapIndex].eodmMarker != 
-		IX_NPEDL_END_OF_DOWNLOAD_MAP)
-	       && (status == IX_SUCCESS))
-	{
-	    /* calculate pointer to block to be downloaded */
-	    blockPtr = imageCodePtr +
-		downloadMap->entry[mapIndex].block.offset;
-
-	    switch (downloadMap->entry[mapIndex].block.type)
-	    {
-	    case IX_NPEDL_BLOCK_TYPE_INSTRUCTION:
-		status = ixNpeDlNpeMgrMemLoad (npeId, npeBaseAddress, 
-					     (IxNpeDlNpeMgrCodeBlock *)blockPtr,
-					       verify,
-					       IX_NPEDL_MEM_TYPE_INSTRUCTION);
-		break;
-	    case IX_NPEDL_BLOCK_TYPE_DATA:
-		status = ixNpeDlNpeMgrMemLoad (npeId, npeBaseAddress,
-                                             (IxNpeDlNpeMgrCodeBlock *)blockPtr,
-					       verify, IX_NPEDL_MEM_TYPE_DATA);
-		break;
-	    case IX_NPEDL_BLOCK_TYPE_STATE:
-		status = ixNpeDlNpeMgrStateInfoLoad (npeBaseAddress,
-				       (IxNpeDlNpeMgrStateInfoBlock *) blockPtr,
-						     verify);
-		break;
-	    default:
-		IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrImageLoad: "
-				       "unknown block type in download map\n");
-		status = IX_NPEDL_CRITICAL_MICROCODE_ERR;
-		ixNpeDlNpeMgrStats.criticalMicrocodeErrors++;
-		break;
-	    }
-	    mapIndex++;
-	}/* loop: for each entry in download map, while status == SUCCESS */
-    }/* condition: NPE stopped before attempting download */
-    
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, 
-		     "Exiting ixNpeDlNpeMgrImageLoad : status = %d\n",
-		     status);
-    return status;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrMemLoad
- */
-PRIVATE IX_STATUS
-ixNpeDlNpeMgrMemLoad (
-    IxNpeDlNpeId npeId,
-    UINT32 npeBaseAddress,
-    IxNpeDlNpeMgrCodeBlock *blockPtr,
-    BOOL verify,
-    IxNpeDlNpeMemType npeMemType)
-{
-    UINT32 npeMemAddress;
-    UINT32 blockSize;
-    UINT32 memSize = 0;
-    IxNpeDlNpeMgrMemWrite memWriteFunc = NULL;
-    UINT32 localIndex = 0;
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlNpeMgrMemLoad\n");
-    
-    /*
-     * select NPE EXCTL reg read/write commands depending on memory
-     * type (instruction/data) to be accessed
-     */
-    if (npeMemType == IX_NPEDL_MEM_TYPE_INSTRUCTION)
-    {
-	memSize = ixNpeDlNpeInfo[npeId].insMemSize;
-	memWriteFunc = (IxNpeDlNpeMgrMemWrite) ixNpeDlNpeMgrInsMemWrite;
-    }
-    else if (npeMemType == IX_NPEDL_MEM_TYPE_DATA)
-    {
-	memSize = ixNpeDlNpeInfo[npeId].dataMemSize;
-	memWriteFunc = (IxNpeDlNpeMgrMemWrite) ixNpeDlNpeMgrDataMemWrite;
-    }
-
-    /*
-     * NPE memory is loaded contiguously from each block, so only address
-     * of 1st word in block is needed
-     */
-    npeMemAddress = blockPtr->npeMemAddress;
-    /* number of words of instruction/data microcode in block to download */
-    blockSize = blockPtr->size;
-    if ((npeMemAddress + blockSize) > memSize)
-    {
-	IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrMemLoad: "
-			       "Block size too big for NPE memory\n");
-	status = IX_NPEDL_CRITICAL_MICROCODE_ERR;
-	ixNpeDlNpeMgrStats.criticalMicrocodeErrors++;
-    }
-    else
-    {
-	for (localIndex = 0; localIndex < blockSize; localIndex++)
-	{
-	    status = memWriteFunc (npeBaseAddress, npeMemAddress,
-				   blockPtr->data[localIndex], verify);
-
-	    if (status != IX_SUCCESS)
-	    {
-		IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrMemLoad: "
-				       "write to NPE memory failed\n");
-		status = IX_NPEDL_CRITICAL_NPE_ERR;
-		ixNpeDlNpeMgrStats.criticalNpeErrors++;
-		break;   /* abort download */
-	    }
-	    /* increment target (word)address in NPE memory */
-	    npeMemAddress++;   
-	}
-    }/* condition: block size will fit in NPE memory */
-
-    if (status == IX_SUCCESS)
-    {
-	if (npeMemType == IX_NPEDL_MEM_TYPE_INSTRUCTION)
-	{
-	    ixNpeDlNpeMgrStats.instructionBlocksLoaded++;
-	}
-	else if (npeMemType == IX_NPEDL_MEM_TYPE_DATA)
-	{
-	    ixNpeDlNpeMgrStats.dataBlocksLoaded++;
-	}
-    }
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlNpeMgrMemLoad : status = %d\n", status);
-    return status;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrStateInfoLoad
- */
-PRIVATE IX_STATUS
-ixNpeDlNpeMgrStateInfoLoad (
-    UINT32 npeBaseAddress,
-    IxNpeDlNpeMgrStateInfoBlock *blockPtr,
-    BOOL verify)
-{
-    UINT32 blockSize;
-    UINT32 ctxtRegAddrInfo; 
-    UINT32 ctxtRegVal;
-    IxNpeDlCtxtRegNum ctxtReg; /* identifies Context Store reg (0-3) */
-    UINT32 ctxtNum;            /* identifies Context number (0-16)   */
-    UINT32 i;
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlNpeMgrStateInfoLoad\n");
-
-    /* block size contains number of words of state-info in block */
-    blockSize = blockPtr->size;
-    
-    ixNpeDlNpeMgrDebugInstructionPreExec (npeBaseAddress);
-
-    /* for each state-info context register entry in block */
-    for (i = 0; i < (blockSize/IX_NPEDL_STATE_INFO_ENTRY_SIZE); i++)
-    {
-	/* each state-info entry is 2 words (address, value) in length */
-	ctxtRegAddrInfo = (blockPtr->ctxtRegEntry[i]).addressInfo;
-	ctxtRegVal      = (blockPtr->ctxtRegEntry[i]).value;
-	
-	ctxtReg = (ctxtRegAddrInfo & IX_NPEDL_MASK_STATE_ADDR_CTXT_REG);
-	ctxtNum = (ctxtRegAddrInfo & IX_NPEDL_MASK_STATE_ADDR_CTXT_NUM) >> 
-	    IX_NPEDL_OFFSET_STATE_ADDR_CTXT_NUM;
-	
-	/* error-check Context Register No. and Context Number values  */
-	/* NOTE that there is no STEVT register for Context 0 */
-	if ((ctxtReg < 0) ||
-	    (ctxtReg >= IX_NPEDL_CTXT_REG_MAX) ||
-	    (ctxtNum > IX_NPEDL_CTXT_NUM_MAX) ||
-	    ((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STEVT)))
-	{
-	    IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrStateInfoLoad: "
-				   "invalid Context Register Address\n");
-	    status = IX_NPEDL_CRITICAL_MICROCODE_ERR;
-	    ixNpeDlNpeMgrStats.criticalMicrocodeErrors++;
-	    break;   /* abort download */
-	}    
-	
-	status = ixNpeDlNpeMgrCtxtRegWrite (npeBaseAddress, ctxtNum, ctxtReg,
-					    ctxtRegVal, verify);
-	if (status != IX_SUCCESS)
-	{
-	    IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrStateInfoLoad: "
-				   "write of state-info to NPE failed\n");
-	    status = IX_NPEDL_CRITICAL_NPE_ERR;
-	    ixNpeDlNpeMgrStats.criticalNpeErrors++;
-	    break;   /* abort download */
-	}
-    }/* loop: for each context reg entry in State Info block */
-    
-    ixNpeDlNpeMgrDebugInstructionPostExec (npeBaseAddress);
-
-    if (status == IX_SUCCESS)
-    {
-	ixNpeDlNpeMgrStats.stateInfoBlocksLoaded++;
-    }
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlNpeMgrStateInfoLoad : status = %d\n",
-		     status);
-    return status;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrNpeReset
- */
-IX_STATUS
-ixNpeDlNpeMgrNpeReset (
-    IxNpeDlNpeId npeId)
-{
-    UINT32 npeBaseAddress;
-    IxNpeDlCtxtRegNum ctxtReg; /* identifies Context Store reg (0-3) */
-    UINT32 ctxtNum;            /* identifies Context number (0-16)   */
-    UINT32 regAddr;
-    UINT32 regVal;
-    UINT32 localIndex;
-    UINT32 indexMax;
-    IX_STATUS status = IX_SUCCESS;
-    IxFeatureCtrlReg unitFuseReg;
-    UINT32 ixNpeConfigCtrlRegVal;
-    
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, 
-		     "Entering ixNpeDlNpeMgrNpeReset\n");
-    
-    /* get base memory address of NPE from npeId */
-    npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId);
-
-    /* pre-store the NPE Config Control Register Value */
-    IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_CTL, &ixNpeConfigCtrlRegVal);
-    
-    ixNpeConfigCtrlRegVal |= 0x3F000000;
-    
-    /* disable the parity interrupt */
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_CTL, (ixNpeConfigCtrlRegVal & IX_NPEDL_PARITY_BIT_MASK));
-    
-    ixNpeDlNpeMgrDebugInstructionPreExec (npeBaseAddress);
-
-    /*
-     * clear the FIFOs
-     */
-    while (ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress,
-				      IX_NPEDL_REG_OFFSET_WFIFO,
-				      IX_NPEDL_MASK_WFIFO_VALID))
-    {
-	/* read from the Watch-point FIFO until empty */
-	IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WFIFO,
-			   &regVal);
-    }
-    
-    while (ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress,
-					  IX_NPEDL_REG_OFFSET_STAT,
-				      IX_NPEDL_MASK_STAT_OFNE))
-    {
-	/* read from the outFIFO until empty */
-	IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_FIFO,
-			   &regVal);
-    }
-    
-    while (ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress,
-				      IX_NPEDL_REG_OFFSET_STAT,
-				      IX_NPEDL_MASK_STAT_IFNE))
-    {
-	/*
-	 * step execution of the NPE intruction to read inFIFO using
-	 * the Debug Executing Context stack
-	 */
-	status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress,
-					   IX_NPEDL_INSTR_RD_FIFO, 0, 0);
-
-    if (IX_SUCCESS != status)
-    {
-        return status;   
-    }
-    
-    }
-    
-    /*
-     * Reset the mailbox reg
-     */
-    /* ...from XScale side */
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_MBST,
-			IX_NPEDL_REG_RESET_MBST);
-    /* ...from NPE side */
-    status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress,
-				       IX_NPEDL_INSTR_RESET_MBOX, 0, 0);
-
-    if (IX_SUCCESS != status)
-    {
-        return status;   
-    }
-
-    /* 
-     *   Reset the physical registers in the NPE register file:
-     *   Note: no need to save/restore REGMAP for Context 0 here
-     *   since all Context Store regs are reset in subsequent code
-     */
-    for (regAddr = 0;
-	 (regAddr < IX_NPEDL_TOTAL_NUM_PHYS_REG) && (status != IX_FAIL);
-	 regAddr++)
-    {
-	/* for each physical register in the NPE reg file, write 0 : */
-	status = ixNpeDlNpeMgrPhysicalRegWrite (npeBaseAddress, regAddr,
-						0, true);
-	if (status != IX_SUCCESS)
-	{
-	    return status;  /* abort reset */
-	}
-    }
-    
-
-    /*
-     * Reset the context store:
-     */
-    for (ctxtNum = IX_NPEDL_CTXT_NUM_MIN;
-	 ctxtNum <= IX_NPEDL_CTXT_NUM_MAX; ctxtNum++)
-    {	
-	/* set each context's Context Store registers to reset values: */
-	for (ctxtReg = 0; ctxtReg < IX_NPEDL_CTXT_REG_MAX; ctxtReg++)
-	{
-	    /* NOTE that there is no STEVT register for Context 0 */
-	    if (!((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STEVT)))
-	    { 
-		regVal = ixNpeDlCtxtRegResetValues[ctxtReg];
-		status = ixNpeDlNpeMgrCtxtRegWrite (npeBaseAddress, ctxtNum,
-						    ctxtReg, regVal, true);
-		if (status != IX_SUCCESS)
-		{
-		    return status;  /* abort reset */
-		}
-	    }
-	}
-    }
-
-    ixNpeDlNpeMgrDebugInstructionPostExec (npeBaseAddress);
-
-    /* write Reset values to Execution Context Stack registers */
-    indexMax = sizeof (ixNpeDlEcsRegResetValues) /
-	sizeof (IxNpeDlEcsRegResetValue);
-    for (localIndex = 0; localIndex < indexMax; localIndex++)
-    {
-	regAddr = ixNpeDlEcsRegResetValues[localIndex].regAddr;
-	regVal = ixNpeDlEcsRegResetValues[localIndex].regResetVal;
-	ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, regAddr, regVal);
-    }
-    
-    /* clear the profile counter */
-    ixNpeDlNpeMgrCommandIssue (npeBaseAddress, 
-			       IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT);
-    
-    /* clear registers EXCT, AP0, AP1, AP2 and AP3 */
-    for (regAddr = IX_NPEDL_REG_OFFSET_EXCT;
-	     regAddr <= IX_NPEDL_REG_OFFSET_AP3;
-	 regAddr += IX_NPEDL_BYTES_PER_WORD)
-    {
-	IX_NPEDL_REG_WRITE (npeBaseAddress, regAddr, 0);
-    }
-    
-    /* Reset the Watch-count register */
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, 0);
-    
-    /*
-     * WR IXA00055043 - Remove IMEM Parity Introduced by NPE Reset Operation
-     */
-
-    /*
-     * Call the feature control API to fused out and reset the NPE and its
-     * coprocessor - to reset internal states and remove parity error
-     */
-    unitFuseReg = ixFeatureCtrlRead ();
-    unitFuseReg |= (IX_NPEDL_RESET_NPE_PARITY << npeId);
-    ixFeatureCtrlWrite (unitFuseReg);
-
-    /* call the feature control API to un-fused and un-reset the NPE & COP */
-    unitFuseReg &= (~(IX_NPEDL_RESET_NPE_PARITY << npeId));
-    ixFeatureCtrlWrite (unitFuseReg);
-
-    /*
-     * Call NpeMgr function to stop the NPE again after the Feature Control
-     * has unfused and Un-Reset the NPE and its associated Coprocessors
-     */
-    status = ixNpeDlNpeMgrNpeStop (npeId);
-
-    /* restore NPE configuration bus Control Register - Parity Settings  */
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_CTL, 
-        (ixNpeConfigCtrlRegVal & IX_NPEDL_CONFIG_CTRL_REG_MASK));
-
-    ixNpeDlNpeMgrStats.npeResets++;
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlNpeMgrNpeReset : status = %d\n", status);
-    return status;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrNpeStart
- */
-IX_STATUS
-ixNpeDlNpeMgrNpeStart (
-    IxNpeDlNpeId npeId)
-{
-    UINT32    npeBaseAddress;
-    UINT32    ecsRegVal;
-    BOOL      npeRunning;
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, 
-		     "Entering ixNpeDlNpeMgrNpeStart\n");
-
-    /* get base memory address of NPE from npeId */
-    npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId);
-
-    /*
-     * ensure only Background Context Stack Level is Active by turning off
-     * the Active bit in each of the other Executing Context Stack levels
-     */
-    ecsRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress,
-					     IX_NPEDL_ECS_PRI_1_CTXT_REG_0);
-    ecsRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE;
-    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_PRI_1_CTXT_REG_0,
-				  ecsRegVal);
-
-    ecsRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress,
-					     IX_NPEDL_ECS_PRI_2_CTXT_REG_0);
-    ecsRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE;
-    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_PRI_2_CTXT_REG_0,
-				  ecsRegVal);
-
-    ecsRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress,
-					     IX_NPEDL_ECS_DBG_CTXT_REG_0);
-    ecsRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE;
-    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0,
-				  ecsRegVal);
-    
-    /* clear the pipeline */
-    ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
-    
-    /* start NPE execution by issuing command through EXCTL register on NPE */
-    ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_START);
-
-    /*
-     * check execution status of NPE to verify NPE Start operation was
-     * successful
-     */
-    npeRunning = ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress,
-					    IX_NPEDL_REG_OFFSET_EXCTL,
-					    IX_NPEDL_EXCTL_STATUS_RUN);
-    if (npeRunning)
-    {
-	ixNpeDlNpeMgrStats.npeStarts++;
-    }
-    else
-    {
-	IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrNpeStart: "
-			       "failed to start NPE execution\n");
-	status = IX_FAIL;
-    }
-
-    
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlNpeMgrNpeStart : status = %d\n", status);
-    return status;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrNpeStop
- */
-IX_STATUS
-ixNpeDlNpeMgrNpeStop (
-    IxNpeDlNpeId npeId)
-{
-    UINT32    npeBaseAddress;
-    IX_STATUS status = IX_SUCCESS;
-    
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlNpeMgrNpeStop\n");
-    
-    /* get base memory address of NPE from npeId */
-    npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId);
-
-    /* stop NPE execution by issuing command through EXCTL register on NPE */
-    ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_STOP);
-
-    /* verify that NPE Stop was successful */
-    if (! ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL,
-				     IX_NPEDL_EXCTL_STATUS_STOP))
-    {
-	IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrNpeStop: "
-			       "failed to stop NPE execution\n");
-	status = IX_FAIL;
-    }
-
-    ixNpeDlNpeMgrStats.npeStops++;
-    
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlNpeMgrNpeStop : status = %d\n", status);
-    return status;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrBitsSetCheck
- */
-PRIVATE BOOL
-ixNpeDlNpeMgrBitsSetCheck (
-    UINT32 npeBaseAddress,
-    UINT32 regOffset,
-    UINT32 expectedBitsSet)
-{
-    UINT32 regVal;
-    IX_NPEDL_REG_READ (npeBaseAddress, regOffset, &regVal);
-
-    return expectedBitsSet == (expectedBitsSet & regVal);
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrStatsShow
- */
-void
-ixNpeDlNpeMgrStatsShow (void)
-{
-    ixOsalLog (IX_OSAL_LOG_LVL_USER,
-               IX_OSAL_LOG_DEV_STDOUT,
-               "\nixNpeDlNpeMgrStatsShow:\n"
-               "\tInstruction Blocks loaded: %u\n"
-               "\tData Blocks loaded: %u\n"
-               "\tState Information Blocks loaded: %u\n"
-               "\tCritical NPE errors: %u\n"
-               "\tCritical Microcode errors: %u\n",
-               ixNpeDlNpeMgrStats.instructionBlocksLoaded,
-               ixNpeDlNpeMgrStats.dataBlocksLoaded,
-               ixNpeDlNpeMgrStats.stateInfoBlocksLoaded,
-               ixNpeDlNpeMgrStats.criticalNpeErrors,
-               ixNpeDlNpeMgrStats.criticalMicrocodeErrors,
-               0);
-
-    ixOsalLog (IX_OSAL_LOG_LVL_USER,
-               IX_OSAL_LOG_DEV_STDOUT,
-               "\tSuccessful NPE Starts: %u\n"
-               "\tSuccessful NPE Stops: %u\n"
-               "\tSuccessful NPE Resets: %u\n\n",
-               ixNpeDlNpeMgrStats.npeStarts,
-               ixNpeDlNpeMgrStats.npeStops,
-               ixNpeDlNpeMgrStats.npeResets,
-               0,0,0);
-
-    ixNpeDlNpeMgrUtilsStatsShow ();
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrStatsReset
- */
-void
-ixNpeDlNpeMgrStatsReset (void)
-{
-    ixNpeDlNpeMgrStats.instructionBlocksLoaded = 0;
-    ixNpeDlNpeMgrStats.dataBlocksLoaded = 0;
-    ixNpeDlNpeMgrStats.stateInfoBlocksLoaded = 0;
-    ixNpeDlNpeMgrStats.criticalNpeErrors = 0;
-    ixNpeDlNpeMgrStats.criticalMicrocodeErrors = 0;
-    ixNpeDlNpeMgrStats.npeStarts = 0;
-    ixNpeDlNpeMgrStats.npeStops = 0;
-    ixNpeDlNpeMgrStats.npeResets = 0;
-
-    ixNpeDlNpeMgrUtilsStatsReset ();
-}
diff --git a/drivers/net/npe/IxNpeDlNpeMgrUtils.c b/drivers/net/npe/IxNpeDlNpeMgrUtils.c
deleted file mode 100644
index db50d22..0000000
--- a/drivers/net/npe/IxNpeDlNpeMgrUtils.c
+++ /dev/null
@@ -1,782 +0,0 @@
-/**
- * @file IxNpeDlNpeMgrUtils.c
- *
- * @author Intel Corporation
- * @date 18 February 2002
- *
- * @brief This file contains the implementation of the private API for the 
- *        IXP425 NPE Downloader NpeMgr Utils module
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-
-/*
- * Put the system defined include files required.
- */
-#define IX_NPE_DL_MAX_NUM_OF_RETRIES 1000000 /**< Maximum number of
-                                              * retries before
-                                              * timeout
-					                          */  
-
-/*
- * Put the user defined include files required.
- */
-#include "IxOsal.h"
-#include "IxNpeDl.h"
-#include "IxNpeDlNpeMgrUtils_p.h"
-#include "IxNpeDlNpeMgrEcRegisters_p.h"
-#include "IxNpeDlMacros_p.h"
-
-/*
- * #defines and macros used in this file.
- */
-
-/* used to bit-mask a number of bytes */
-#define IX_NPEDL_MASK_LOWER_BYTE_OF_WORD  0x000000FF
-#define IX_NPEDL_MASK_LOWER_SHORT_OF_WORD 0x0000FFFF
-#define IX_NPEDL_MASK_FULL_WORD           0xFFFFFFFF
-
-#define IX_NPEDL_BYTES_PER_WORD           4
-#define IX_NPEDL_BYTES_PER_SHORT          2
-
-#define IX_NPEDL_REG_SIZE_BYTE            8
-#define IX_NPEDL_REG_SIZE_SHORT           16
-#define IX_NPEDL_REG_SIZE_WORD            32
-
-/*
- * Introduce extra read cycles after issuing read command to NPE
- * so that we read the register after the NPE has updated it
- * This is to overcome race condition between XScale and NPE
- */
-#define IX_NPEDL_DELAY_READ_CYCLES        2
-/*
- * To mask top three MSBs of 32bit word to download into NPE IMEM
- */
-#define IX_NPEDL_MASK_UNUSED_IMEM_BITS    0x1FFFFFFF;
-
-
-/*
- * typedefs
- */
-typedef struct
-{
-    UINT32 regAddress;
-    UINT32 regSize;
-} IxNpeDlCtxtRegAccessInfo;
-
-/* module statistics counters */
-typedef struct
-{
-    UINT32 insMemWrites;
-    UINT32 insMemWriteFails;
-    UINT32 dataMemWrites;
-    UINT32 dataMemWriteFails;
-    UINT32 ecsRegWrites;
-    UINT32 ecsRegReads;
-    UINT32 dbgInstructionExecs;
-    UINT32 contextRegWrites;
-    UINT32 physicalRegWrites;
-    UINT32 nextPcWrites;
-} IxNpeDlNpeMgrUtilsStats;
-
-
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-
-/* 
- * contains useful address and function pointers to read/write Context Regs, 
- * eliminating some switch or if-else statements in places
- */
-static IxNpeDlCtxtRegAccessInfo ixNpeDlCtxtRegAccInfo[IX_NPEDL_CTXT_REG_MAX] =
-{
-    {
-	IX_NPEDL_CTXT_REG_ADDR_STEVT,
-	IX_NPEDL_REG_SIZE_BYTE
-    },
-    {
-	IX_NPEDL_CTXT_REG_ADDR_STARTPC,
-	IX_NPEDL_REG_SIZE_SHORT
-    },
-    {
-	IX_NPEDL_CTXT_REG_ADDR_REGMAP,
-	IX_NPEDL_REG_SIZE_SHORT
-    },
-    {
-	IX_NPEDL_CTXT_REG_ADDR_CINDEX,
-	IX_NPEDL_REG_SIZE_BYTE
-    }
-};
-
-static UINT32 ixNpeDlSavedExecCount = 0;
-static UINT32 ixNpeDlSavedEcsDbgCtxtReg2 = 0;
-
-static IxNpeDlNpeMgrUtilsStats ixNpeDlNpeMgrUtilsStats;
-
-
-/*
- * static function prototypes.
- */
-PRIVATE __inline__ void
-ixNpeDlNpeMgrWriteCommandIssue (UINT32 npeBaseAddress, UINT32 cmd,
-				UINT32 addr, UINT32 data);
-
-PRIVATE __inline__ UINT32
-ixNpeDlNpeMgrReadCommandIssue (UINT32 npeBaseAddress, UINT32 cmd, UINT32 addr);
-
-PRIVATE IX_STATUS
-ixNpeDlNpeMgrLogicalRegRead (UINT32 npeBaseAddress, UINT32 regAddr,
-			     UINT32 regSize, UINT32 ctxtNum, UINT32 *regVal);
-
-PRIVATE IX_STATUS
-ixNpeDlNpeMgrLogicalRegWrite (UINT32 npeBaseAddress, UINT32 regAddr,
-			      UINT32 regVal, UINT32 regSize,
-			      UINT32 ctxtNum, BOOL verify);
-
-/*
- * Function definition: ixNpeDlNpeMgrWriteCommandIssue
- */
-PRIVATE __inline__ void
-ixNpeDlNpeMgrWriteCommandIssue (
-    UINT32 npeBaseAddress,
-    UINT32 cmd,
-    UINT32 addr,
-    UINT32 data)
-{
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, data);
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXAD, addr);
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrReadCommandIssue
- */
-PRIVATE __inline__ UINT32
-ixNpeDlNpeMgrReadCommandIssue (
-    UINT32 npeBaseAddress,
-    UINT32 cmd,
-    UINT32 addr)
-{
-    UINT32 data = 0;
-    int i;
-
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXAD, addr);
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
-    for (i = 0; i <= IX_NPEDL_DELAY_READ_CYCLES; i++)
-    {
-	IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, &data);
-    }
-
-    return data;
-}
-
-/*
- * Function definition: ixNpeDlNpeMgrInsMemWrite
- */
-IX_STATUS
-ixNpeDlNpeMgrInsMemWrite (
-    UINT32 npeBaseAddress,
-    UINT32 insMemAddress,
-    UINT32 insMemData,
-    BOOL verify)
-{
-    UINT32 insMemDataRtn;
-
-    ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress,
-				    IX_NPEDL_EXCTL_CMD_WR_INS_MEM,
-				    insMemAddress, insMemData);
-    if (verify)
-    {
-        /* write invalid data to this reg, so we can see if we're reading 
-	   the EXDATA register too early */
-	IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA,
-			    ~insMemData);
-
-        /*Disabled since top 3 MSB are not used for Azusa hardware Refer WR:IXA00053900*/
-        insMemData&=IX_NPEDL_MASK_UNUSED_IMEM_BITS;
-
-        insMemDataRtn=ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress,
-                                           IX_NPEDL_EXCTL_CMD_RD_INS_MEM,
-                                           insMemAddress);
-
-        insMemDataRtn&=IX_NPEDL_MASK_UNUSED_IMEM_BITS;
-
-	if (insMemData != insMemDataRtn)
-	{
-	    ixNpeDlNpeMgrUtilsStats.insMemWriteFails++;
-	    return IX_FAIL;
-	}
-    }
-
-    ixNpeDlNpeMgrUtilsStats.insMemWrites++;
-    return IX_SUCCESS;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrDataMemWrite
- */
-IX_STATUS
-ixNpeDlNpeMgrDataMemWrite (
-    UINT32 npeBaseAddress,
-    UINT32 dataMemAddress,
-    UINT32 dataMemData,
-    BOOL verify)
-{
-    ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress,
-				    IX_NPEDL_EXCTL_CMD_WR_DATA_MEM,
-				    dataMemAddress, dataMemData);
-    if (verify)
-    {
-        /* write invalid data to this reg, so we can see if we're reading 
-	   the EXDATA register too early */
-	IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, ~dataMemData);
-
-	if (dataMemData !=
-	    ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress,
-					   IX_NPEDL_EXCTL_CMD_RD_DATA_MEM,
-					   dataMemAddress))
-	{
-	    ixNpeDlNpeMgrUtilsStats.dataMemWriteFails++;
-	    return IX_FAIL;
-	}
-    }
-
-    ixNpeDlNpeMgrUtilsStats.dataMemWrites++;
-    return IX_SUCCESS;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrExecAccRegWrite
- */
-void
-ixNpeDlNpeMgrExecAccRegWrite (
-    UINT32 npeBaseAddress,
-    UINT32 regAddress,
-    UINT32 regData)
-{
-    ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress,
-				    IX_NPEDL_EXCTL_CMD_WR_ECS_REG,
-				    regAddress, regData);
-    ixNpeDlNpeMgrUtilsStats.ecsRegWrites++;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrExecAccRegRead
- */
-UINT32
-ixNpeDlNpeMgrExecAccRegRead (
-    UINT32 npeBaseAddress,
-    UINT32 regAddress)
-{
-    ixNpeDlNpeMgrUtilsStats.ecsRegReads++;
-    return ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress,
-					  IX_NPEDL_EXCTL_CMD_RD_ECS_REG,
-					  regAddress);
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrCommandIssue
- */
-void
-ixNpeDlNpeMgrCommandIssue (
-    UINT32 npeBaseAddress,
-    UINT32 command)     
-{
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlNpeMgrCommandIssue\n");
-
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, command);
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlNpeMgrCommandIssue\n");
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrDebugInstructionPreExec
- */
-void
-ixNpeDlNpeMgrDebugInstructionPreExec(
-    UINT32 npeBaseAddress)
-{
-    /* turn off the halt bit by clearing Execution Count register. */
-    /* save reg contents 1st and restore later */
-    IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT,
-		       &ixNpeDlSavedExecCount);
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, 0);
-
-    /* ensure that IF and IE are on (temporarily), so that we don't end up
-     * stepping forever */
-    ixNpeDlSavedEcsDbgCtxtReg2 = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress,
-				                   IX_NPEDL_ECS_DBG_CTXT_REG_2);
-
-    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_2,
-				  (ixNpeDlSavedEcsDbgCtxtReg2 |
-				   IX_NPEDL_MASK_ECS_DBG_REG_2_IF |
-				   IX_NPEDL_MASK_ECS_DBG_REG_2_IE));
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrDebugInstructionExec
- */
-IX_STATUS
-ixNpeDlNpeMgrDebugInstructionExec(
-    UINT32 npeBaseAddress,
-    UINT32 npeInstruction,
-    UINT32 ctxtNum,
-    UINT32 ldur)
-{
-    UINT32 ecsDbgRegVal;
-    UINT32 oldWatchcount, newWatchcount;
-    UINT32 retriesCount = 0;
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlNpeMgrDebugInstructionExec\n");
-
-    /* set the Active bit, and the LDUR, in the debug level */
-    ecsDbgRegVal = IX_NPEDL_MASK_ECS_REG_0_ACTIVE |
-	(ldur << IX_NPEDL_OFFSET_ECS_REG_0_LDUR);
-
-    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0,
-				  ecsDbgRegVal);
-
-    /*
-     * set CCTXT at ECS DEBUG L3 to specify in which context to execute the
-     * instruction, and set SELCTXT at ECS DEBUG Level to specify which context
-     * store to access.
-     * Debug ECS Level Reg 1 has form  0x000n000n, where n = context number
-     */
-    ecsDbgRegVal = (ctxtNum << IX_NPEDL_OFFSET_ECS_REG_1_CCTXT) |
-	(ctxtNum << IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT);
-
-    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_1,
-				  ecsDbgRegVal);
-
-    /* clear the pipeline */
-    ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
-
-    /* load NPE instruction into the instruction register */
-    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_INSTRUCT_REG,
-				  npeInstruction);
-
-    /* we need this value later to wait for completion of NPE execution step */
-    IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, &oldWatchcount);
-
-    /* issue a Step One command via the Execution Control register */
-    ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_STEP);
-
-	/* Watch Count register increments when NPE completes an instruction */
-	IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC,
-        &newWatchcount);
-        
-    /*
-     * force the XScale to wait until the NPE has finished execution step
-     * NOTE that this delay will be very small, just long enough to allow a
-     * single NPE instruction to complete execution; if instruction execution
-     * is not completed before timeout retries, exit the while loop
-     */
-    while ((IX_NPE_DL_MAX_NUM_OF_RETRIES > retriesCount) 
-        && (newWatchcount == oldWatchcount))
-    {
-	    /* Watch Count register increments when NPE completes an instruction */
-	    IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC,
-		    &newWatchcount);
-			   
-        retriesCount++;
-    }    
-
-    if (IX_NPE_DL_MAX_NUM_OF_RETRIES > retriesCount)
-    {
-        ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs++;
-    }
-    else
-    {
-        /* Return timeout status as the instruction has not been executed
-         * after maximum retries */
-        status = IX_NPEDL_CRITICAL_NPE_ERR;
-    }
-    
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlNpeMgrDebugInstructionExec\n");
-		     
-    return status;
-}    
-
-
-/*
- * Function definition: ixNpeDlNpeMgrDebugInstructionPostExec
- */
-void
-ixNpeDlNpeMgrDebugInstructionPostExec(
-    UINT32 npeBaseAddress)
-{
-    /* clear active bit in debug level */
-    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0,
-				  0);
-
-    /* clear the pipeline */
-    ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
-    
-    /* restore Execution Count register contents. */
-    IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT,
-			ixNpeDlSavedExecCount);
-
-    /* restore IF and IE bits to original values */
-    ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_2,
-				  ixNpeDlSavedEcsDbgCtxtReg2);
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrLogicalRegRead
- */
-PRIVATE IX_STATUS
-ixNpeDlNpeMgrLogicalRegRead (
-    UINT32 npeBaseAddress, 
-    UINT32 regAddr,
-    UINT32 regSize,
-    UINT32 ctxtNum,
-    UINT32 *regVal)
-{
-    IX_STATUS status = IX_SUCCESS;
-    UINT32 npeInstruction = 0;
-    UINT32 mask = 0;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlNpeMgrLogicalRegRead\n");
-
-    switch (regSize)
-    {
-    case IX_NPEDL_REG_SIZE_BYTE:
-      npeInstruction = IX_NPEDL_INSTR_RD_REG_BYTE;
-      mask = IX_NPEDL_MASK_LOWER_BYTE_OF_WORD;  break;
-    case IX_NPEDL_REG_SIZE_SHORT:
-      npeInstruction = IX_NPEDL_INSTR_RD_REG_SHORT;
-      mask = IX_NPEDL_MASK_LOWER_SHORT_OF_WORD;  break;
-    case IX_NPEDL_REG_SIZE_WORD:
-      npeInstruction = IX_NPEDL_INSTR_RD_REG_WORD;
-      mask = IX_NPEDL_MASK_FULL_WORD;  break;
-    }
-
-    /* make regAddr be the SRC and DEST operands (e.g. movX d0, d0) */
-    npeInstruction |= (regAddr << IX_NPEDL_OFFSET_INSTR_SRC) |
-	(regAddr << IX_NPEDL_OFFSET_INSTR_DEST);
-
-    /* step execution of NPE intruction using Debug Executing Context stack */
-    status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress, npeInstruction,
-				       ctxtNum, IX_NPEDL_RD_INSTR_LDUR);
-
-    if (IX_SUCCESS != status)
-    {
-        return status;
-    }
-    
-    /* read value of register from Execution Data register */
-    IX_NPEDL_REG_READ (npeBaseAddress,	IX_NPEDL_REG_OFFSET_EXDATA, regVal);
-
-   /* align value from left to right */
-    *regVal = (*regVal >> (IX_NPEDL_REG_SIZE_WORD - regSize)) & mask;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlNpeMgrLogicalRegRead\n");
-    
-    return IX_SUCCESS;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrLogicalRegWrite
- */
-PRIVATE IX_STATUS
-ixNpeDlNpeMgrLogicalRegWrite (
-    UINT32 npeBaseAddress, 
-    UINT32 regAddr,
-    UINT32 regVal,
-    UINT32 regSize,
-    UINT32 ctxtNum,
-    BOOL verify)
-{
-    UINT32 npeInstruction = 0;
-    UINT32 mask = 0;
-    IX_STATUS status = IX_SUCCESS;
-    UINT32 retRegVal;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlNpeMgrLogicalRegWrite\n");
-
-    if (regSize == IX_NPEDL_REG_SIZE_WORD)
-    {
-	/* NPE register addressing is left-to-right: e.g. |d0|d1|d2|d3| */
-	/* Write upper half-word (short) to |d0|d1| */
-	status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, regAddr,
-				      regVal >> IX_NPEDL_REG_SIZE_SHORT,
-				      IX_NPEDL_REG_SIZE_SHORT,
-				      ctxtNum, verify);
-				      
-	if (IX_SUCCESS != status)
-	{
-	    return status;
-	}
-	
-	/* Write lower half-word (short) to |d2|d3| */
-	status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress,
-				      regAddr + IX_NPEDL_BYTES_PER_SHORT,
-                                    regVal & IX_NPEDL_MASK_LOWER_SHORT_OF_WORD,
-				      IX_NPEDL_REG_SIZE_SHORT,
-				      ctxtNum, verify);
-    
-    if (IX_SUCCESS != status)
-	{
-	    return status;
-	}
-	}
-    else
-    {
-        switch (regSize)
-	{ 
-	case IX_NPEDL_REG_SIZE_BYTE:
-	    npeInstruction = IX_NPEDL_INSTR_WR_REG_BYTE;
-	    mask = IX_NPEDL_MASK_LOWER_BYTE_OF_WORD;  break;
-	case IX_NPEDL_REG_SIZE_SHORT:
-            npeInstruction = IX_NPEDL_INSTR_WR_REG_SHORT;
-	    mask = IX_NPEDL_MASK_LOWER_SHORT_OF_WORD;  break;
-	}
-	/* mask out any redundant bits, so verify will work later */
-	regVal &= mask;
-
-	/* fill dest operand field of  instruction with destination reg addr */
-	npeInstruction |= (regAddr << IX_NPEDL_OFFSET_INSTR_DEST);
-
-	/* fill src operand field of instruction with least-sig 5 bits of val*/
-	npeInstruction |= ((regVal & IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA) <<
-			   IX_NPEDL_OFFSET_INSTR_SRC);
-
-	/* fill coprocessor field of instruction with most-sig 11 bits of val*/
-	npeInstruction |= ((regVal & IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA) <<
-			   IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA);
-
-	/* step execution of NPE intruction using Debug ECS */
-	status = ixNpeDlNpeMgrDebugInstructionExec(npeBaseAddress, npeInstruction,
-					  ctxtNum, IX_NPEDL_WR_INSTR_LDUR);
-					  
-	if (IX_SUCCESS != status)
-	{
-	    return status;  
-	} 
-    }/* condition: if reg to be written is 8-bit or 16-bit (not 32-bit) */
-
-    if (verify)
-    {
-	status = ixNpeDlNpeMgrLogicalRegRead (npeBaseAddress, regAddr,
-						   regSize, ctxtNum, &retRegVal);
-						   
-        if (IX_SUCCESS == status)
-        {
-            if (regVal != retRegVal)
-            {
-                status = IX_FAIL;
-            }
-        }        
-    }
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlNpeMgrLogicalRegWrite : status = %d\n",
-		     status);
-    
-    return status;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrPhysicalRegWrite
- */
-IX_STATUS
-ixNpeDlNpeMgrPhysicalRegWrite (
-    UINT32 npeBaseAddress,
-    UINT32 regAddr,
-    UINT32 regValue,
-    BOOL verify)
-{
-    IX_STATUS status;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Entering ixNpeDlNpeMgrPhysicalRegWrite\n");
-
-/*
- * There are 32 physical registers used in an NPE.  These are
- * treated as 16 pairs of 32-bit registers.  To write one of the pair,
- * write the pair number (0-16) to the REGMAP for Context 0.  Then write
- * the value to register  0 or 4 in the regfile, depending on which
- * register of the pair is to be written
- */
-
-    /*
-     * set REGMAP for context 0 to (regAddr >> 1) to choose which pair (0-16)
-     * of physical registers to write 
-     */
-    status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress,
-					   IX_NPEDL_CTXT_REG_ADDR_REGMAP,
-					   (regAddr >>
-					  IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP),
-					   IX_NPEDL_REG_SIZE_SHORT, 0, verify);
-    if (status == IX_SUCCESS)
-    {
-	/* regAddr = 0 or 4  */
-	regAddr = (regAddr & IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR) *
-	    IX_NPEDL_BYTES_PER_WORD;
-    
-    status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, regAddr, regValue, 
-					   IX_NPEDL_REG_SIZE_WORD, 0, verify);
-    }
-    
-    if (status != IX_SUCCESS)
-    {
-	IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrPhysicalRegWrite: "
-			       "error writing to physical register\n");
-    }
-
-    ixNpeDlNpeMgrUtilsStats.physicalRegWrites++;
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT,
-		     "Exiting ixNpeDlNpeMgrPhysicalRegWrite : status = %d\n",
-		     status);
-    return status;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrCtxtRegWrite
- */
-IX_STATUS
-ixNpeDlNpeMgrCtxtRegWrite (
-    UINT32 npeBaseAddress,
-    UINT32 ctxtNum,
-    IxNpeDlCtxtRegNum ctxtReg,
-    UINT32 ctxtRegVal,
-    BOOL verify)
-{
-    UINT32 tempRegVal;
-    UINT32 ctxtRegAddr;
-    UINT32 ctxtRegSize;
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, 
-		     "Entering ixNpeDlNpeMgrCtxtRegWrite\n");
-
-    /*
-     * Context 0 has no STARTPC. Instead, this value is used to set
-     * NextPC for Background ECS, to set where NPE starts executing code
-     */
-    if ((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STARTPC))
-    {
-	/* read BG_CTXT_REG_0, update NEXTPC bits, and write back to reg */
-	tempRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress,
-						  IX_NPEDL_ECS_BG_CTXT_REG_0);
-	tempRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_NEXTPC;
-	tempRegVal |= (ctxtRegVal << IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC) &
-	    IX_NPEDL_MASK_ECS_REG_0_NEXTPC;
-	
-	ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress,
-				      IX_NPEDL_ECS_BG_CTXT_REG_0, tempRegVal);
-
-	ixNpeDlNpeMgrUtilsStats.nextPcWrites++;
-    }
-    else
-    {
-	ctxtRegAddr = ixNpeDlCtxtRegAccInfo[ctxtReg].regAddress;
-	ctxtRegSize = ixNpeDlCtxtRegAccInfo[ctxtReg].regSize;
-	status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, ctxtRegAddr,
-					       ctxtRegVal, ctxtRegSize,
-					       ctxtNum, verify);
-	if (status != IX_SUCCESS)
-	{
-	    IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrCtxtRegWrite: "
-				   "error writing to context store register\n");
-	}
-	
-	ixNpeDlNpeMgrUtilsStats.contextRegWrites++;
-    }
-
-    IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, 
-		     "Exiting ixNpeDlNpeMgrCtxtRegWrite : status = %d\n",
-		     status);
-
-    return status;
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrUtilsStatsShow
- */
-void
-ixNpeDlNpeMgrUtilsStatsShow (void)
-{
-    ixOsalLog (IX_OSAL_LOG_LVL_USER,
-               IX_OSAL_LOG_DEV_STDOUT,
-               "\nixNpeDlNpeMgrUtilsStatsShow:\n"
-               "\tInstruction Memory writes: %u\n"
-               "\tInstruction Memory writes failed: %u\n"
-               "\tData Memory writes: %u\n"
-               "\tData Memory writes failed: %u\n",
-               ixNpeDlNpeMgrUtilsStats.insMemWrites,
-               ixNpeDlNpeMgrUtilsStats.insMemWriteFails,
-               ixNpeDlNpeMgrUtilsStats.dataMemWrites,
-               ixNpeDlNpeMgrUtilsStats.dataMemWriteFails,
-               0,0);
-
-    ixOsalLog (IX_OSAL_LOG_LVL_USER,
-               IX_OSAL_LOG_DEV_STDOUT,
-               "\tExecuting Context Stack Register writes: %u\n"
-               "\tExecuting Context Stack Register reads: %u\n"
-               "\tPhysical Register writes: %u\n"
-               "\tContext Store Register writes: %u\n"
-               "\tExecution Backgound Context NextPC writes: %u\n"
-               "\tDebug Instructions Executed: %u\n\n",
-               ixNpeDlNpeMgrUtilsStats.ecsRegWrites,
-               ixNpeDlNpeMgrUtilsStats.ecsRegReads,
-               ixNpeDlNpeMgrUtilsStats.physicalRegWrites,
-               ixNpeDlNpeMgrUtilsStats.contextRegWrites,
-               ixNpeDlNpeMgrUtilsStats.nextPcWrites,
-               ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs);
-}
-
-
-/*
- * Function definition: ixNpeDlNpeMgrUtilsStatsReset
- */
-void
-ixNpeDlNpeMgrUtilsStatsReset (void)
-{
-    ixNpeDlNpeMgrUtilsStats.insMemWrites = 0;
-    ixNpeDlNpeMgrUtilsStats.insMemWriteFails = 0;
-    ixNpeDlNpeMgrUtilsStats.dataMemWrites = 0;
-    ixNpeDlNpeMgrUtilsStats.dataMemWriteFails = 0;
-    ixNpeDlNpeMgrUtilsStats.ecsRegWrites = 0;
-    ixNpeDlNpeMgrUtilsStats.ecsRegReads = 0;
-    ixNpeDlNpeMgrUtilsStats.physicalRegWrites = 0;
-    ixNpeDlNpeMgrUtilsStats.contextRegWrites = 0;
-    ixNpeDlNpeMgrUtilsStats.nextPcWrites = 0;
-    ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs = 0;
-}
diff --git a/drivers/net/npe/IxNpeMh.c b/drivers/net/npe/IxNpeMh.c
deleted file mode 100644
index 5adabd8..0000000
--- a/drivers/net/npe/IxNpeMh.c
+++ /dev/null
@@ -1,558 +0,0 @@
-/**
- * @file IxNpeMh.c
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the implementation of the public API for the
- * IXP425 NPE Message Handler component.
- *
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * Put the system defined include files required.
- */
-
-/*
- * Put the user defined include files required.
- */
-
-#include "IxOsal.h"
-#include "IxNpeMhMacros_p.h"
-
-#include "IxNpeMh.h"
-
-#include "IxNpeMhConfig_p.h"
-#include "IxNpeMhReceive_p.h"
-#include "IxNpeMhSend_p.h"
-#include "IxNpeMhSolicitedCbMgr_p.h"
-#include "IxNpeMhUnsolicitedCbMgr_p.h"
-
-/*
- * #defines and macros used in this file.
- */
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-
-PRIVATE BOOL ixNpeMhInitialized = false;
-
-/*
- * Extern function prototypes.
- */
-
-/*
- * Static function prototypes.
- */
-
-/*
- * Function definition: ixNpeMhInitialize
- */
-
-PUBLIC IX_STATUS ixNpeMhInitialize (
-    IxNpeMhNpeInterrupts npeInterrupts)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhInitialize\n");
-
-    /* check the npeInterrupts parameter */
-    if ((npeInterrupts != IX_NPEMH_NPEINTERRUPTS_NO) &&
-        (npeInterrupts != IX_NPEMH_NPEINTERRUPTS_YES))
-    {
-        IX_NPEMH_ERROR_REPORT ("Illegal npeInterrupts parameter value\n");
-        return IX_FAIL;
-    }
-
-    /* parameters are ok ... */
-
-    /* initialize the Receive module */
-    ixNpeMhReceiveInitialize ();
-
-    /* initialize the Solicited Callback Manager module */
-    ixNpeMhSolicitedCbMgrInitialize ();
-
-    /* initialize the Unsolicited Callback Manager module */
-    ixNpeMhUnsolicitedCbMgrInitialize ();
-
-    /* initialize the Configuration module
-     *
-     * NOTE: This module was originally configured before the
-     * others, but the sequence was changed so that interrupts
-     * would only be enabled after the handler functions were
-     * set up.  The above modules need to be initialised to
-     * handle the NPE interrupts.  See SCR #2231.
-     */
-    ixNpeMhConfigInitialize (npeInterrupts);
-
-    ixNpeMhInitialized = true;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhInitialize\n");
-
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeMhUnload
- */
-
-PUBLIC IX_STATUS ixNpeMhUnload (void)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhUnload\n");
-
-    if (!ixNpeMhInitialized)
-    {
-	return IX_FAIL;
-    }
-
-    /* Uninitialize the Configuration module */
-    ixNpeMhConfigUninit ();
-
-    ixNpeMhInitialized = false;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhUnload\n");
-
-    return IX_SUCCESS;
-}
-
-
-/*
- * Function definition: ixNpeMhUnsolicitedCallbackRegister
- */
-
-PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackRegister (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId messageId,
-    IxNpeMhCallback unsolicitedCallback)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhUnsolicitedCallbackRegister\n");
-
-    /* check that we are initialized */
-    if (!ixNpeMhInitialized)
-    {
-        IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n");
-        return IX_FAIL;
-    }
-
-    /* check the npeId parameter */
-    if (!ixNpeMhConfigNpeIdIsValid (npeId))
-    {
-        IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n");
-        return IX_FAIL;
-    }
-
-    /* check the messageId parameter */
-    if ((messageId < IX_NPEMH_MIN_MESSAGE_ID)
-        || (messageId > IX_NPEMH_MAX_MESSAGE_ID))
-    {
-        IX_NPEMH_ERROR_REPORT ("Message ID is out of range\n");
-        return IX_FAIL;
-    }
-
-    /* the unsolicitedCallback parameter is allowed to be NULL */
-
-    /* parameters are ok ... */
-
-    /* get the lock to prevent other clients from entering */
-    ixNpeMhConfigLockGet (npeId);
-
-    /* save the unsolicited callback for the message ID */
-    ixNpeMhUnsolicitedCbMgrCallbackSave (
-        npeId, messageId, unsolicitedCallback);
-
-    /* release the lock to allow other clients back in */
-    ixNpeMhConfigLockRelease (npeId);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhUnsolicitedCallbackRegister\n");
-
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeMhUnsolicitedCallbackForRangeRegister
- */
-
-PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackForRangeRegister (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId minMessageId,
-    IxNpeMhMessageId maxMessageId,
-    IxNpeMhCallback unsolicitedCallback)
-{
-    IxNpeMhMessageId messageId;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhUnsolicitedCallbackForRangeRegister\n");
-
-    /* check that we are initialized */
-    if (!ixNpeMhInitialized)
-    {
-        IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n");
-        return IX_FAIL;
-    }
-
-    /* check the npeId parameter */
-    if (!ixNpeMhConfigNpeIdIsValid (npeId))
-    {
-        IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n");
-        return IX_FAIL;
-    }
-
-    /* check the minMessageId parameter */
-    if ((minMessageId < IX_NPEMH_MIN_MESSAGE_ID)
-        || (minMessageId > IX_NPEMH_MAX_MESSAGE_ID))
-    {
-        IX_NPEMH_ERROR_REPORT ("Min message ID is out of range\n");
-        return IX_FAIL;
-    }
-
-    /* check the maxMessageId parameter */
-    if ((maxMessageId < IX_NPEMH_MIN_MESSAGE_ID)
-        || (maxMessageId > IX_NPEMH_MAX_MESSAGE_ID))
-    {
-        IX_NPEMH_ERROR_REPORT ("Max message ID is out of range\n");
-        return IX_FAIL;
-    }
-
-    /* check the semantics of the message range parameters */
-    if (minMessageId > maxMessageId)
-    {
-        IX_NPEMH_ERROR_REPORT ("Min message ID greater than max message "
-                               "ID\n");
-        return IX_FAIL;
-    }
-
-    /* the unsolicitedCallback parameter is allowed to be NULL */
-
-    /* parameters are ok ... */
-
-    /* get the lock to prevent other clients from entering */
-    ixNpeMhConfigLockGet (npeId);
-
-    /* for each message ID in the range ... */
-    for (messageId = minMessageId; messageId <= maxMessageId; messageId++)
-    {
-        /* save the unsolicited callback for the message ID */
-        ixNpeMhUnsolicitedCbMgrCallbackSave (
-            npeId, messageId, unsolicitedCallback);
-    }
-
-    /* release the lock to allow other clients back in */
-    ixNpeMhConfigLockRelease (npeId);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhUnsolicitedCallbackForRangeRegister\n");
-
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeMhMessageSend
- */
-
-PUBLIC IX_STATUS ixNpeMhMessageSend (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message,
-    UINT32 maxSendRetries)
-{
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhMessageSend\n");
-
-    /* check that we are initialized */
-    if (!ixNpeMhInitialized)
-    {
-        IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n");
-        return IX_FAIL;
-    }
-
-    /* check the npeId parameter */
-    if (!ixNpeMhConfigNpeIdIsValid (npeId))
-    {
-        IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n");
-        return IX_FAIL;
-    }
-
-    /* parameters are ok ... */
-
-    /* get the lock to prevent other clients from entering */
-    ixNpeMhConfigLockGet (npeId);
-
-    /* send the message */
-    status = ixNpeMhSendMessageSend (npeId, message, maxSendRetries);
-    if (status != IX_SUCCESS)
-    {
-        IX_NPEMH_ERROR_REPORT ("Failed to send message\n");
-    }
-
-    /* release the lock to allow other clients back in */
-    ixNpeMhConfigLockRelease (npeId);
-
-    IX_NPEMH_TRACE1 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhMessageSend"
-                     " : status = %d\n", status);
-
-    return status;
-}
-
-/*
- * Function definition: ixNpeMhMessageWithResponseSend
- */
-
-PUBLIC IX_STATUS ixNpeMhMessageWithResponseSend (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message,
-    IxNpeMhMessageId solicitedMessageId,
-    IxNpeMhCallback solicitedCallback,
-    UINT32 maxSendRetries)
-{
-    IX_STATUS status = IX_SUCCESS;
-    IxNpeMhCallback unsolicitedCallback = NULL;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhMessageWithResponseSend\n");
-
-    /* check that we are initialized */
-    if (!ixNpeMhInitialized)
-    {
-        IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n");
-        return IX_FAIL;
-    }
-
-    /* the solicitecCallback parameter is allowed to be NULL.  this */
-    /* signifies the client is not interested in the response message */
-
-    /* check the npeId parameter */
-    if (!ixNpeMhConfigNpeIdIsValid (npeId))
-    {
-        IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n");
-        return IX_FAIL;
-    }
-
-    /* check the solicitedMessageId parameter */
-    if ((solicitedMessageId < IX_NPEMH_MIN_MESSAGE_ID)
-        || (solicitedMessageId > IX_NPEMH_MAX_MESSAGE_ID))
-    {
-        IX_NPEMH_ERROR_REPORT ("Solicited message ID is out of range\n");
-        return IX_FAIL;
-    }
-
-    /* check the solicitedMessageId parameter.  if an unsolicited */
-    /* callback has been registered for the specified message ID then */
-    /* report an error and return failure */
-    ixNpeMhUnsolicitedCbMgrCallbackRetrieve (
-        npeId, solicitedMessageId, &unsolicitedCallback);
-    if (unsolicitedCallback != NULL)
-    {
-        IX_NPEMH_ERROR_REPORT ("Solicited message ID conflicts with "
-                               "unsolicited message ID\n");
-        return IX_FAIL;
-    }
-
-    /* parameters are ok ... */
-
-    /* get the lock to prevent other clients from entering */
-    ixNpeMhConfigLockGet (npeId);
-
-    /* send the message */
-    status = ixNpeMhSendMessageWithResponseSend (
-        npeId, message, solicitedMessageId, solicitedCallback,
-        maxSendRetries);
-    if (status != IX_SUCCESS)
-    {
-        IX_NPEMH_ERROR_REPORT ("Failed to send message\n");
-    }
-
-    /* release the lock to allow other clients back in */
-    ixNpeMhConfigLockRelease (npeId);
-
-    IX_NPEMH_TRACE1 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhMessageWithResponseSend"
-                     " : status = %d\n", status);
-
-    return status;
-}
-
-/*
- * Function definition: ixNpeMhMessagesReceive
- */
-
-PUBLIC IX_STATUS ixNpeMhMessagesReceive (
-    IxNpeMhNpeId npeId)
-{
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhMessagesReceive\n");
-
-    /* check that we are initialized */
-    if (!ixNpeMhInitialized)
-    {
-        IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n");
-        return IX_FAIL;
-    }
-
-    /* check the npeId parameter */
-    if (!ixNpeMhConfigNpeIdIsValid (npeId))
-    {
-        IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n");
-        return IX_FAIL;
-    }
-
-    /* parameters are ok ... */
-
-    /* get the lock to prevent other clients from entering */
-    ixNpeMhConfigLockGet (npeId);
-
-    /* receive messages from the NPE */
-    status = ixNpeMhReceiveMessagesReceive (npeId);
-
-    if (status != IX_SUCCESS)
-    {
-        IX_NPEMH_ERROR_REPORT ("Failed to receive message\n");
-    }
-
-    /* release the lock to allow other clients back in */
-    ixNpeMhConfigLockRelease (npeId);
-
-    IX_NPEMH_TRACE1 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhMessagesReceive"
-                     " : status = %d\n", status);
-
-    return status;
-}
-
-/*
- * Function definition: ixNpeMhShow
- */
-
-PUBLIC IX_STATUS ixNpeMhShow (
-    IxNpeMhNpeId npeId)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhShow\n");
-
-    /* check that we are initialized */
-    if (!ixNpeMhInitialized)
-    {
-        IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n");
-        return IX_FAIL;
-    }
-
-    /* check the npeId parameter */
-    if (!ixNpeMhConfigNpeIdIsValid (npeId))
-    {
-        IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n");
-        return IX_FAIL;
-    }
-
-    /* parameters are ok ... */
-
-    /* note we don't get the lock here as printing the statistics */
-    /* to a console may take some time and we don't want to impact */
-    /* system performance.  this means that the statistics displayed */
-    /* may be in a state of flux and make not represent a consistent */
-    /* snapshot. */
-
-    /* display a header */
-    ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT,
-	       "Current state of NPE ID %d:\n\n", npeId, 0, 0, 0, 0, 0);
-
-    /* show the current state of each module */
-
-    /* show the current state of the Configuration module */
-    ixNpeMhConfigShow (npeId);
-
-    /* show the current state of the Receive module */
-    ixNpeMhReceiveShow (npeId);
-
-    /* show the current state of the Send module */
-    ixNpeMhSendShow (npeId);
-
-    /* show the current state of the Solicited Callback Manager module */
-    ixNpeMhSolicitedCbMgrShow (npeId);
-
-    /* show the current state of the Unsolicited Callback Manager module */
-    ixNpeMhUnsolicitedCbMgrShow (npeId);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhShow\n");
-
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeMhShowReset
- */
-
-PUBLIC IX_STATUS ixNpeMhShowReset (
-    IxNpeMhNpeId npeId)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhShowReset\n");
-
-    /* check that we are initialized */
-    if (!ixNpeMhInitialized)
-    {
-        IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n");
-        return IX_FAIL;
-    }
-
-    /* check the npeId parameter */
-    if (!ixNpeMhConfigNpeIdIsValid (npeId))
-    {
-        IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n");
-        return IX_FAIL;
-    }
-
-    /* parameters are ok ... */
-
-    /* note we don't get the lock here as resetting the statistics */
-    /* shouldn't impact system performance. */
-
-    /* reset the current state of each module */
-
-    /* reset the current state of the Configuration module */
-    ixNpeMhConfigShowReset (npeId);
-
-    /* reset the current state of the Receive module */
-    ixNpeMhReceiveShowReset (npeId);
-
-    /* reset the current state of the Send module */
-    ixNpeMhSendShowReset (npeId);
-
-    /* reset the current state of the Solicited Callback Manager module */
-    ixNpeMhSolicitedCbMgrShowReset (npeId);
-
-    /* reset the current state of the Unsolicited Callback Manager module */
-    ixNpeMhUnsolicitedCbMgrShowReset (npeId);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhShowReset\n");
-
-    return IX_SUCCESS;
-}
diff --git a/drivers/net/npe/IxNpeMhConfig.c b/drivers/net/npe/IxNpeMhConfig.c
deleted file mode 100644
index eaa9a21..0000000
--- a/drivers/net/npe/IxNpeMhConfig.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/**
- * @file IxNpeMhConfig.c
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the implementation of the private API for the
- * Configuration module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * Put the system defined include files required.
- */
-
-
-/*
- * Put the user defined include files required.
- */
-
-#include "IxOsal.h"
-
-#include "IxNpeMhMacros_p.h"
-
-#include "IxNpeMhConfig_p.h"
-
-/*
- * #defines and macros used in this file.
- */
-#define IX_NPE_MH_MAX_NUM_OF_RETRIES 1000000 /**< Maximum number of
-                                              * retries before
-                                              * timeout
-					                          */  
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/**
- * @struct IxNpeMhConfigStats
- *
- * @brief This structure is used to maintain statistics for the
- * Configuration module.
- */
-
-typedef struct
-{
-    UINT32 outFifoReads;        /**< outFifo reads */
-    UINT32 inFifoWrites;        /**< inFifo writes */
-    UINT32 maxInFifoFullRetries;   /**< max retries if inFIFO full   */
-    UINT32 maxOutFifoEmptyRetries; /**< max retries if outFIFO empty */
-} IxNpeMhConfigStats;
-
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-
-IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] =
-{
-    {
-        0,
-        IX_NPEMH_NPEA_INT,
-	0,
-        0,
-        0,
-        0,
-        0,
-        NULL,
-        false
-    },
-    {
-        0,
-        IX_NPEMH_NPEB_INT,
-	0,
-	0,
-        0,
-        0,
-        0,
-        NULL,
-        false
-    },
-    {
-        0,
-        IX_NPEMH_NPEC_INT,
-        0,
-        0,
-        0,
-        0,
-        0,
-        NULL,
-        false
-    }
-};
-
-PRIVATE IxNpeMhConfigStats ixNpeMhConfigStats[IX_NPEMH_NUM_NPES];
-
-/*
- * Extern function prototypes.
- */
-
-/*
- * Static function prototypes.
- */
-PRIVATE
-void ixNpeMhConfigIsr (void *parameter);
-
-/*
- * Function definition: ixNpeMhConfigIsr
- */
-
-PRIVATE
-void ixNpeMhConfigIsr (void *parameter)
-{
-    IxNpeMhNpeId npeId = (IxNpeMhNpeId)parameter;
-    UINT32 ofint;
-    volatile UINT32 *statusReg =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigIsr\n");
-
-    /* get the OFINT (OutFifo interrupt) bit of the status register */
-    IX_NPEMH_REGISTER_READ_BITS (statusReg, &ofint, IX_NPEMH_NPE_STAT_OFINT);
-
-    /* if the OFINT status bit is set */
-    if (ofint)
-    {
-        /* if there is an ISR registered for this NPE */
-        if (ixNpeMhConfigNpeInfo[npeId].isr != NULL)
-        {
-            /* invoke the ISR routine */
-            ixNpeMhConfigNpeInfo[npeId].isr (npeId);
-        }
-        else
-        {
-            /* if we don't service the interrupt the NPE will continue */
-            /* to trigger the interrupt indefinitely */
-            IX_NPEMH_ERROR_REPORT ("No ISR registered to service "
-                                   "interrupt\n");
-        }
-    }
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigIsr\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigInitialize
- */
-
-void ixNpeMhConfigInitialize (
-    IxNpeMhNpeInterrupts npeInterrupts)
-{
-    IxNpeMhNpeId npeId;
-    UINT32 virtualAddr[IX_NPEMH_NUM_NPES];
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigInitialize\n");
-
-    /* Request a mapping for the NPE-A config register address space */
-    virtualAddr[IX_NPEMH_NPEID_NPEA] =
-	(UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEA_BASE,
-				     IX_OSAL_IXP400_NPEA_MAP_SIZE);
-    IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEA]);
-
-    /* Request a mapping for the NPE-B config register address space */
-    virtualAddr[IX_NPEMH_NPEID_NPEB] =
-	(UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEB_BASE,
-				     IX_OSAL_IXP400_NPEB_MAP_SIZE);
-    IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEB]);
-    
-    /* Request a mapping for the NPE-C config register address space */
-    virtualAddr[IX_NPEMH_NPEID_NPEC] =
-	(UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEC_BASE,
-				     IX_OSAL_IXP400_NPEC_MAP_SIZE);
-    IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEC]);
-
-    /* for each NPE ... */
-    for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++)
-    {
-        /* declare a convenience pointer */
-        IxNpeMhConfigNpeInfo *npeInfo = &ixNpeMhConfigNpeInfo[npeId];
-	
-	/* store the virtual addresses of the NPE registers for later use */
-	npeInfo->virtualRegisterBase  = virtualAddr[npeId];
-	npeInfo->statusRegister  = virtualAddr[npeId] + IX_NPEMH_NPESTAT_OFFSET;
-	npeInfo->controlRegister = virtualAddr[npeId] + IX_NPEMH_NPECTL_OFFSET;
-	npeInfo->inFifoRegister  = virtualAddr[npeId] + IX_NPEMH_NPEFIFO_OFFSET;
-	npeInfo->outFifoRegister = virtualAddr[npeId] + IX_NPEMH_NPEFIFO_OFFSET;
-
-        /* for test purposes - to verify the register addresses */
-        IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d status register  = "
-                         "0x%08X\n", npeId, npeInfo->statusRegister);
-        IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d control register = "
-                         "0x%08X\n", npeId, npeInfo->controlRegister);
-        IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d inFifo register  = "
-                         "0x%08X\n", npeId, npeInfo->inFifoRegister);
-        IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d outFifo register = "
-                         "0x%08X\n", npeId, npeInfo->outFifoRegister);
-
-        /* connect our ISR to the NPE interrupt */
-        (void) ixOsalIrqBind (
-            npeInfo->interruptId, ixNpeMhConfigIsr, (void *)npeId);
-
-        /* initialise a mutex for this NPE */
-        (void) ixOsalMutexInit (&npeInfo->mutex);
-
-        /* if we should service the NPE's "outFIFO not empty" interrupt */
-        if (npeInterrupts == IX_NPEMH_NPEINTERRUPTS_YES)
-        {
-            /* enable the NPE's "outFIFO not empty" interrupt */
-            ixNpeMhConfigNpeInterruptEnable (npeId);
-        }
-        else
-        {
-            /* disable the NPE's "outFIFO not empty" interrupt */
-            ixNpeMhConfigNpeInterruptDisable (npeId);
-        }
-    }
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigInitialize\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigUninit
- */
-
-void ixNpeMhConfigUninit (void)
-{
-    IxNpeMhNpeId npeId;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigUninit\n");
-
-    /* for each NPE ... */
-    for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++)
-    {
-        /* declare a convenience pointer */
-        IxNpeMhConfigNpeInfo *npeInfo = &ixNpeMhConfigNpeInfo[npeId];
-        
-        /* disconnect ISR */
-        ixOsalIrqUnbind(npeInfo->interruptId);
-
-        /* destroy mutex associated with this NPE */
-        ixOsalMutexDestroy(&npeInfo->mutex);
-	
-	IX_OSAL_MEM_UNMAP (npeInfo->virtualRegisterBase);
-
-	npeInfo->virtualRegisterBase  = 0;
-	npeInfo->statusRegister  = 0;
-	npeInfo->controlRegister = 0;
-	npeInfo->inFifoRegister  = 0;
-	npeInfo->outFifoRegister = 0;
-    }
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigUninit\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigIsrRegister
- */
-
-void ixNpeMhConfigIsrRegister (
-    IxNpeMhNpeId npeId,
-    IxNpeMhConfigIsr isr)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigIsrRegister\n");
-
-    /* check if there is already an ISR registered for this NPE */
-    if (ixNpeMhConfigNpeInfo[npeId].isr != NULL)
-    {
-        IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG, "Over-writing registered NPE ISR\n");
-    }
-
-    /* save the ISR routine with the NPE info */
-    ixNpeMhConfigNpeInfo[npeId].isr = isr;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigIsrRegister\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigNpeInterruptEnable
- */
-
-BOOL ixNpeMhConfigNpeInterruptEnable (
-    IxNpeMhNpeId npeId)
-{
-    UINT32 ofe;
-    volatile UINT32 *controlReg =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].controlRegister;
-
-    /* get the OFE (OutFifoEnable) bit of the control register */
-    IX_NPEMH_REGISTER_READ_BITS (controlReg, &ofe, IX_NPEMH_NPE_CTL_OFE);
-
-    /* if the interrupt is disabled then we must enable it */
-    if (!ofe)
-    {
-        /* set the OFE (OutFifoEnable) bit of the control register */
-        /* we must set the OFEWE (OutFifoEnableWriteEnable) at the same */
-        /* time for the write to have effect */
-        IX_NPEMH_REGISTER_WRITE_BITS (controlReg,
-                                      (IX_NPEMH_NPE_CTL_OFE |
-                                       IX_NPEMH_NPE_CTL_OFEWE),
-                                      (IX_NPEMH_NPE_CTL_OFE |
-                                       IX_NPEMH_NPE_CTL_OFEWE));
-    }
-
-    /* return the previous state of the interrupt */
-    return (ofe != 0);
-}
-
-/*
- * Function definition: ixNpeMhConfigNpeInterruptDisable
- */
-
-BOOL ixNpeMhConfigNpeInterruptDisable (
-    IxNpeMhNpeId npeId)
-{
-    UINT32 ofe;
-    volatile UINT32 *controlReg =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].controlRegister;
-
-    /* get the OFE (OutFifoEnable) bit of the control register */
-    IX_NPEMH_REGISTER_READ_BITS (controlReg, &ofe, IX_NPEMH_NPE_CTL_OFE);
-
-    /* if the interrupt is enabled then we must disable it */
-    if (ofe)
-    {
-        /* unset the OFE (OutFifoEnable) bit of the control register */
-        /* we must set the OFEWE (OutFifoEnableWriteEnable) at the same */
-        /* time for the write to have effect */
-        IX_NPEMH_REGISTER_WRITE_BITS (controlReg,
-                                      (0                    |
-                                       IX_NPEMH_NPE_CTL_OFEWE),
-                                      (IX_NPEMH_NPE_CTL_OFE |
-                                       IX_NPEMH_NPE_CTL_OFEWE));
-    }
-
-    /* return the previous state of the interrupt */
-    return (ofe != 0);
-}
-
-/*
- * Function definition: ixNpeMhConfigMessageIdGet
- */
-
-IxNpeMhMessageId ixNpeMhConfigMessageIdGet (
-    IxNpeMhMessage message)
-{
-    /* return the most-significant byte of the first word of the */
-    /* message */
-    return ((IxNpeMhMessageId) ((message.data[0] >> 24) & 0xFF));
-}
-
-/*
- * Function definition: ixNpeMhConfigNpeIdIsValid
- */
-
-BOOL ixNpeMhConfigNpeIdIsValid (
-    IxNpeMhNpeId npeId)
-{
-    /* check that the npeId parameter is within the range of valid IDs */
-    return (npeId >= 0 && npeId < IX_NPEMH_NUM_NPES);
-}
-
-/*
- * Function definition: ixNpeMhConfigLockGet
- */
-
-void ixNpeMhConfigLockGet (
-    IxNpeMhNpeId npeId)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigLockGet\n");
-
-    /* lock the mutex for this NPE */
-    (void) ixOsalMutexLock (&ixNpeMhConfigNpeInfo[npeId].mutex, 
-			    IX_OSAL_WAIT_FOREVER);
-
-    /* disable the NPE's "outFIFO not empty" interrupt */
-    ixNpeMhConfigNpeInfo[npeId].oldInterruptState =
-        ixNpeMhConfigNpeInterruptDisable (npeId);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigLockGet\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigLockRelease
- */
-
-void ixNpeMhConfigLockRelease (
-    IxNpeMhNpeId npeId)
-{
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhConfigLockRelease\n");
-
-    /* if the interrupt was previously enabled */
-    if (ixNpeMhConfigNpeInfo[npeId].oldInterruptState)
-    {
-        /* enable the NPE's "outFIFO not empty" interrupt */
-        ixNpeMhConfigNpeInfo[npeId].oldInterruptState =
-            ixNpeMhConfigNpeInterruptEnable (npeId);
-    }
-
-    /* unlock the mutex for this NPE */
-    (void) ixOsalMutexUnlock (&ixNpeMhConfigNpeInfo[npeId].mutex);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhConfigLockRelease\n");
-}
-
-/*
- * Function definition: ixNpeMhConfigInFifoWrite
- */
-
-IX_STATUS ixNpeMhConfigInFifoWrite (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message)
-{
-    volatile UINT32 *npeInFifo =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].inFifoRegister;
-    UINT32 retriesCount = 0;
-
-    /* write the first word of the message to the NPE's inFIFO */
-    IX_NPEMH_REGISTER_WRITE (npeInFifo, message.data[0]);
-
-    /* need to wait for room to write second word - see SCR #493,
-       poll for maximum number of retries, if exceed maximum
-       retries, exit from while loop */
-    while ((IX_NPE_MH_MAX_NUM_OF_RETRIES > retriesCount)
-        && ixNpeMhConfigInFifoIsFull (npeId))
-    {
-        retriesCount++;
-    }
-
-    /* Return TIMEOUT status to caller, indicate that NPE Hang / Halt */
-    if (IX_NPE_MH_MAX_NUM_OF_RETRIES == retriesCount)
-    {
-        return IX_NPEMH_CRITICAL_NPE_ERR;   
-    }    
-    
-    /* write the second word of the message to the NPE's inFIFO */
-    IX_NPEMH_REGISTER_WRITE (npeInFifo, message.data[1]);
-
-    /* record in the stats the maximum number of retries needed */
-    if (ixNpeMhConfigStats[npeId].maxInFifoFullRetries < retriesCount)
-    {
-	ixNpeMhConfigStats[npeId].maxInFifoFullRetries = retriesCount;
-    }
-
-    /* update statistical info */
-    ixNpeMhConfigStats[npeId].inFifoWrites++;
-    
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeMhConfigOutFifoRead
- */
-
-IX_STATUS ixNpeMhConfigOutFifoRead (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage *message)
-{
-    volatile UINT32 *npeOutFifo =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].outFifoRegister;
-    UINT32 retriesCount = 0;
-
-    /* read the first word of the message from the NPE's outFIFO */
-    IX_NPEMH_REGISTER_READ (npeOutFifo, &message->data[0]);
-
-    /* need to wait for NPE to write second word - see SCR #493 
-       poll for maximum number of retries, if exceed maximum
-       retries, exit from while loop */
-    while ((IX_NPE_MH_MAX_NUM_OF_RETRIES > retriesCount)
-        && ixNpeMhConfigOutFifoIsEmpty (npeId))
-    {
-        retriesCount++;
-    }
-
-    /* Return TIMEOUT status to caller, indicate that NPE Hang / Halt */
-    if (IX_NPE_MH_MAX_NUM_OF_RETRIES == retriesCount)
-    {
-        return IX_NPEMH_CRITICAL_NPE_ERR;   
-    } 
-    
-    /* read the second word of the message from the NPE's outFIFO */
-    IX_NPEMH_REGISTER_READ (npeOutFifo, &message->data[1]);
-
-    /* record in the stats the maximum number of retries needed */
-    if (ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries < retriesCount)
-    {
-	ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries = retriesCount;
-    }
-
-    /* update statistical info */
-    ixNpeMhConfigStats[npeId].outFifoReads++;
-    
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeMhConfigShow
- */
-
-void ixNpeMhConfigShow (
-    IxNpeMhNpeId npeId)
-{
-    /* show the message fifo read counter */
-    IX_NPEMH_SHOW ("Message FIFO reads",
-                   ixNpeMhConfigStats[npeId].outFifoReads);
-
-    /* show the message fifo write counter */
-    IX_NPEMH_SHOW ("Message FIFO writes",
-                   ixNpeMhConfigStats[npeId].inFifoWrites);
-
-    /* show the max retries performed when inFIFO full */
-    IX_NPEMH_SHOW ("Max inFIFO Full retries",
-		   ixNpeMhConfigStats[npeId].maxInFifoFullRetries);
-
-    /* show the max retries performed when outFIFO empty */
-    IX_NPEMH_SHOW ("Max outFIFO Empty retries",
-		   ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries);
-
-    /* show the current status of the inFifo */
-    ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT,
-	       "InFifo is %s and %s\n",
-	       (ixNpeMhConfigInFifoIsEmpty (npeId) ? 
-		(int) "EMPTY" : (int) "NOT EMPTY"),
-	       (ixNpeMhConfigInFifoIsFull (npeId) ? 
-		(int) "FULL" : (int) "NOT FULL"),
-	       0, 0, 0, 0);
-
-    /* show the current status of the outFifo */
-    ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT,
-	       "OutFifo is %s and %s\n",
-	       (ixNpeMhConfigOutFifoIsEmpty (npeId) ? 
-		(int) "EMPTY" : (int) "NOT EMPTY"),
-	       (ixNpeMhConfigOutFifoIsFull (npeId) ? 
-		(int) "FULL" : (int) "NOT FULL"),
-	       0, 0, 0, 0);
-}
-
-/*
- * Function definition: ixNpeMhConfigShowReset
- */
-
-void ixNpeMhConfigShowReset (
-    IxNpeMhNpeId npeId)
-{
-    /* reset the message fifo read counter */
-    ixNpeMhConfigStats[npeId].outFifoReads = 0;
-
-    /* reset the message fifo write counter */
-    ixNpeMhConfigStats[npeId].inFifoWrites = 0;
-
-    /* reset the max inFIFO Full retries counter */
-    ixNpeMhConfigStats[npeId].maxInFifoFullRetries = 0;
-
-    /* reset the max outFIFO empty retries counter */
-    ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries = 0;
-}
-
-
diff --git a/drivers/net/npe/IxNpeMhReceive.c b/drivers/net/npe/IxNpeMhReceive.c
deleted file mode 100644
index 273c373..0000000
--- a/drivers/net/npe/IxNpeMhReceive.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/**
- * @file IxNpeMhReceive.c
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the implementation of the private API for the
- * Receive module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * Put the system defined include files required.
- */
-
-
-/*
- * Put the user defined include files required.
- */
-#include "IxOsal.h"
-#include "IxNpeMhMacros_p.h"
-#include "IxNpeMhConfig_p.h"
-#include "IxNpeMhReceive_p.h"
-#include "IxNpeMhSolicitedCbMgr_p.h"
-#include "IxNpeMhUnsolicitedCbMgr_p.h"
-
-/*
- * #defines and macros used in this file.
- */
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/**
- * @struct IxNpeMhReceiveStats
- *
- * @brief This structure is used to maintain statistics for the Receive
- * module.
- */
-
-typedef struct
-{
-    UINT32 isrs;        /**< receive ISR invocations */
-    UINT32 receives;    /**< receive messages invocations */
-    UINT32 messages;    /**< messages received */
-    UINT32 solicited;   /**< solicited messages received */
-    UINT32 unsolicited; /**< unsolicited messages received */
-    UINT32 callbacks;   /**< callbacks invoked */
-} IxNpeMhReceiveStats;
-
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-
-PRIVATE IxNpeMhReceiveStats ixNpeMhReceiveStats[IX_NPEMH_NUM_NPES];
-
-/*
- * Extern function prototypes.
- */
-
-/*
- * Static function prototypes.
- */
-PRIVATE
-void ixNpeMhReceiveIsr (int npeId);
-
-PRIVATE
-void ixNpeMhReceiveIsr (int npeId)
-{
-    int lockKey;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhReceiveIsr\n");
-
-    lockKey = ixOsalIrqLock ();
-
-    /* invoke the message receive routine to get messages from the NPE */
-    ixNpeMhReceiveMessagesReceive (npeId);
-
-    /* update statistical info */
-    ixNpeMhReceiveStats[npeId].isrs++;
-
-    ixOsalIrqUnlock (lockKey);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhReceiveIsr\n");
-}
-
-/*
- * Function definition: ixNpeMhReceiveInitialize
- */
-
-void ixNpeMhReceiveInitialize (void)
-{
-    IxNpeMhNpeId npeId = 0;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhReceiveInitialize\n");
-
-    /* for each NPE ... */
-    for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++)
-    {
-        /* register our internal ISR for the NPE to handle "outFIFO not */
-        /* empty" interrupts */
-        ixNpeMhConfigIsrRegister (npeId, ixNpeMhReceiveIsr);
-    }
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhReceiveInitialize\n");
-}
-
-/*
- * Function definition: ixNpeMhReceiveMessagesReceive
- */
-
-IX_STATUS ixNpeMhReceiveMessagesReceive (
-    IxNpeMhNpeId npeId)
-{
-    IxNpeMhMessage message = { { 0, 0 } };
-    IxNpeMhMessageId messageId = 0;
-    IxNpeMhCallback callback = NULL;
-    IX_STATUS status;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhReceiveMessagesReceive\n");
-
-    /* update statistical info */
-    ixNpeMhReceiveStats[npeId].receives++;
-
-    /* while the NPE has messages in its outFIFO */
-    while (!ixNpeMhConfigOutFifoIsEmpty (npeId))
-    {
-        /* read a message from the NPE's outFIFO */
-        status = ixNpeMhConfigOutFifoRead (npeId, &message);
-
-        if (IX_SUCCESS != status)
-        {
-            return status;
-        }
-        
-        /* get the ID of the message */
-        messageId = ixNpeMhConfigMessageIdGet (message);
-
-	    IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG,
-			 "Received message from NPE %d with ID 0x%02X\n",
-			 npeId, messageId);
-
-        /* update statistical info */
-        ixNpeMhReceiveStats[npeId].messages++;
-
-        /* try to find a matching unsolicited callback for this message. */
-
-        /* we assume the message is unsolicited.  only if there is no */
-        /* unsolicited callback for this message type do we assume the */
-        /* message is solicited.  it is much faster to check for an */
-        /* unsolicited callback, so doing this check first should result */
-        /* in better performance. */
-
-        ixNpeMhUnsolicitedCbMgrCallbackRetrieve (
-            npeId, messageId, &callback);
-
-        if (callback != NULL)
-        {
-	    IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG,
-			     "Found matching unsolicited callback\n");
-
-            /* update statistical info */
-            ixNpeMhReceiveStats[npeId].unsolicited++;
-        }
-
-        /* if no unsolicited callback was found try to find a matching */
-        /* solicited callback for this message */
-        if (callback == NULL)
-        {
-            ixNpeMhSolicitedCbMgrCallbackRetrieve (
-                npeId, messageId, &callback);
-
-            if (callback != NULL)
-            {
-		IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG,
-				 "Found matching solicited callback\n");
-
-                /* update statistical info */
-                ixNpeMhReceiveStats[npeId].solicited++;
-            }
-        }
-
-        /* if a callback (either unsolicited or solicited) was found */
-        if (callback != NULL)
-        {
-            /* invoke the callback to pass the message back to the client */
-            callback (npeId, message);
-
-            /* update statistical info */
-            ixNpeMhReceiveStats[npeId].callbacks++;
-        }
-        else /* no callback (neither unsolicited nor solicited) was found */
-        {
-	    IX_NPEMH_TRACE2 (IX_NPEMH_WARNING,
-			     "No matching callback for NPE %d"
-			     " and ID 0x%02X, discarding message\n",
-			     npeId, messageId);
-
-            /* the message will be discarded.  this is normal behaviour */
-            /* if the client passes a NULL solicited callback when */
-            /* sending a message.  this indicates that the client is not */
-            /* interested in receiving the response.  alternatively a */
-            /* NULL callback here may signify an unsolicited message */
-            /* with no appropriate registered callback. */
-        }
-    }
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhReceiveMessagesReceive\n");
-    
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeMhReceiveShow
- */
-
-void ixNpeMhReceiveShow (
-    IxNpeMhNpeId npeId)
-{
-    /* show the ISR invocation counter */
-    IX_NPEMH_SHOW ("Receive ISR invocations",
-                   ixNpeMhReceiveStats[npeId].isrs);
-
-    /* show the receive message invocation counter */
-    IX_NPEMH_SHOW ("Receive messages invocations",
-                   ixNpeMhReceiveStats[npeId].receives);
-
-    /* show the message received counter */
-    IX_NPEMH_SHOW ("Messages received",
-                   ixNpeMhReceiveStats[npeId].messages);
-
-    /* show the solicited message counter */
-    IX_NPEMH_SHOW ("Solicited messages received",
-                   ixNpeMhReceiveStats[npeId].solicited);
-
-    /* show the unsolicited message counter */
-    IX_NPEMH_SHOW ("Unsolicited messages received",
-                   ixNpeMhReceiveStats[npeId].unsolicited);
-
-    /* show the callback invoked counter */
-    IX_NPEMH_SHOW ("Callbacks invoked",
-                   ixNpeMhReceiveStats[npeId].callbacks);
-
-    /* show the message discarded counter */
-    IX_NPEMH_SHOW ("Received messages discarded",
-                   (ixNpeMhReceiveStats[npeId].messages -
-                    ixNpeMhReceiveStats[npeId].callbacks));
-}
-
-/*
- * Function definition: ixNpeMhReceiveShowReset
- */
-
-void ixNpeMhReceiveShowReset (
-    IxNpeMhNpeId npeId)
-{
-    /* reset the ISR invocation counter */
-    ixNpeMhReceiveStats[npeId].isrs = 0;
-
-    /* reset the receive message invocation counter */
-    ixNpeMhReceiveStats[npeId].receives = 0;
-
-    /* reset the message received counter */
-    ixNpeMhReceiveStats[npeId].messages = 0;
-
-    /* reset the solicited message counter */
-    ixNpeMhReceiveStats[npeId].solicited = 0;
-
-    /* reset the unsolicited message counter */
-    ixNpeMhReceiveStats[npeId].unsolicited = 0;
-
-    /* reset the callback invoked counter */
-    ixNpeMhReceiveStats[npeId].callbacks = 0;
-}
diff --git a/drivers/net/npe/IxNpeMhSend.c b/drivers/net/npe/IxNpeMhSend.c
deleted file mode 100644
index 8b70388..0000000
--- a/drivers/net/npe/IxNpeMhSend.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/**
- * @file IxNpeMhSend.c
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the implementation of the private API for the
- * Send module.
- *
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * Put the system defined include files required.
- */
-
-
-/*
- * Put the user defined include files required.
- */
-
-#include "IxNpeMhMacros_p.h"
-
-#include "IxNpeMhConfig_p.h"
-#include "IxNpeMhSend_p.h"
-#include "IxNpeMhSolicitedCbMgr_p.h"
-
-/*
- * #defines and macros used in this file.
- */
-
-/**
- * @def IX_NPEMH_INFIFO_RETRY_DELAY_US
- *
- * @brief Amount of time (uSecs) to delay between retries
- * while inFIFO is Full when attempting to send a message
- */
-#define IX_NPEMH_INFIFO_RETRY_DELAY_US (1)
-
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/**
- * @struct IxNpeMhSendStats
- *
- * @brief This structure is used to maintain statistics for the Send
- * module.
- */
-
-typedef struct
-{
-    UINT32 sends;             /**< send invocations */
-    UINT32 sendWithResponses; /**< send with response invocations */
-    UINT32 queueFulls;        /**< fifo queue full occurrences */
-    UINT32 queueFullRetries;  /**< fifo queue full retry occurrences */
-    UINT32 maxQueueFullRetries; /**< max fifo queue full retries */
-    UINT32 callbackFulls;     /**< callback list full occurrences */
-} IxNpeMhSendStats;
-
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-
-PRIVATE IxNpeMhSendStats ixNpeMhSendStats[IX_NPEMH_NUM_NPES];
-
-/*
- * Extern function prototypes.
- */
-
-/*
- * Static function prototypes.
- */
-PRIVATE
-BOOL ixNpeMhSendInFifoIsFull(
-    IxNpeMhNpeId npeId,
-    UINT32 maxSendRetries);
-
-/*
- * Function definition: ixNpeMhSendInFifoIsFull
- */
-
-PRIVATE
-BOOL ixNpeMhSendInFifoIsFull(
-    IxNpeMhNpeId npeId,
-    UINT32 maxSendRetries)
-{
-    BOOL isFull = false;
-    UINT32 numRetries = 0;
-
-    /* check the NPE's inFIFO */
-    isFull = ixNpeMhConfigInFifoIsFull (npeId);
-
-    /* we retry a few times, just to give the NPE a chance to read from */
-    /* the FIFO if the FIFO is currently full */
-    while (isFull && (numRetries++ < maxSendRetries))
-    {
-	if (numRetries >= IX_NPEMH_SEND_RETRIES_DEFAULT)
-	{
-	    /* Delay here for as short a time as possible (1 us). */
-	    /* Adding a delay here should ensure we are not hogging */
-	    /* the AHB bus while we are retrying                    */
-	    ixOsalBusySleep (IX_NPEMH_INFIFO_RETRY_DELAY_US);
-	}
-
-        /* re-check the NPE's inFIFO */
-        isFull = ixNpeMhConfigInFifoIsFull (npeId);
-
-        /* update statistical info */
-        ixNpeMhSendStats[npeId].queueFullRetries++;
-    }
-
-    /* record the highest number of retries that occurred */
-    if (ixNpeMhSendStats[npeId].maxQueueFullRetries < numRetries)
-    {
-	ixNpeMhSendStats[npeId].maxQueueFullRetries = numRetries;
-    }
-
-    if (isFull)
-    {
-        /* update statistical info */
-        ixNpeMhSendStats[npeId].queueFulls++;
-    }
-
-    return isFull;
-}
-
-/*
- * Function definition: ixNpeMhSendMessageSend
- */
-
-IX_STATUS ixNpeMhSendMessageSend (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message,
-    UINT32 maxSendRetries)
-{
-    IX_STATUS status;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhSendMessageSend\n");
-
-    /* update statistical info */
-    ixNpeMhSendStats[npeId].sends++;
-
-    /* check if the NPE's inFIFO is full - if so return an error */
-    if (ixNpeMhSendInFifoIsFull (npeId, maxSendRetries))
-    {
-        IX_NPEMH_TRACE0 (IX_NPEMH_WARNING, "NPE's inFIFO is full\n");
-        return IX_FAIL;
-    }
-
-    /* write the message to the NPE's inFIFO */
-    status = ixNpeMhConfigInFifoWrite (npeId, message);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhSendMessageSend\n");
-
-    return status;
-}
-
-/*
- * Function definition: ixNpeMhSendMessageWithResponseSend
- */
-
-IX_STATUS ixNpeMhSendMessageWithResponseSend (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message,
-    IxNpeMhMessageId solicitedMessageId,
-    IxNpeMhCallback solicitedCallback,
-    UINT32 maxSendRetries)
-{
-    IX_STATUS status = IX_SUCCESS;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhSendMessageWithResponseSend\n");
-
-    /* update statistical info */
-    ixNpeMhSendStats[npeId].sendWithResponses++;
-
-    /* sr: this sleep will call the receive routine (no interrupts used!!!) */
-    ixOsalSleep (IX_NPEMH_INFIFO_RETRY_DELAY_US);
-
-    /* check if the NPE's inFIFO is full - if so return an error */
-    if (ixNpeMhSendInFifoIsFull (npeId, maxSendRetries))
-    {
-        IX_NPEMH_TRACE0 (IX_NPEMH_WARNING, "NPE's inFIFO is full\n");
-        return IX_FAIL;
-    }
-
-    /* save the solicited callback */
-    status = ixNpeMhSolicitedCbMgrCallbackSave (
-        npeId, solicitedMessageId, solicitedCallback);
-    if (status != IX_SUCCESS)
-    {
-        IX_NPEMH_ERROR_REPORT ("Failed to save solicited callback\n");
-
-        /* update statistical info */
-        ixNpeMhSendStats[npeId].callbackFulls++;
-
-        return status;
-    }
-
-    /* write the message to the NPE's inFIFO */
-    status = ixNpeMhConfigInFifoWrite (npeId, message);
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhSendMessageWithResponseSend\n");
-
-    return status;
-}
-
-/*
- * Function definition: ixNpeMhSendShow
- */
-
-void ixNpeMhSendShow (
-    IxNpeMhNpeId npeId)
-{
-    /* show the message send invocation counter */
-    IX_NPEMH_SHOW ("Send invocations",
-                   ixNpeMhSendStats[npeId].sends);
-
-    /* show the message send with response invocation counter */
-    IX_NPEMH_SHOW ("Send with response invocations",
-                   ixNpeMhSendStats[npeId].sendWithResponses);
-
-    /* show the fifo queue full occurrence counter */
-    IX_NPEMH_SHOW ("Fifo queue full occurrences",
-                   ixNpeMhSendStats[npeId].queueFulls);
-
-    /* show the fifo queue full retry occurrence counter */
-    IX_NPEMH_SHOW ("Fifo queue full retry occurrences",
-                   ixNpeMhSendStats[npeId].queueFullRetries);
-
-    /* show the fifo queue full maximum retries counter */
-    IX_NPEMH_SHOW ("Maximum fifo queue full retries",
-                   ixNpeMhSendStats[npeId].maxQueueFullRetries);
-
-    /* show the callback list full occurrence counter */
-    IX_NPEMH_SHOW ("Solicited callback list full occurrences",
-                   ixNpeMhSendStats[npeId].callbackFulls);
-}
-
-/*
- * Function definition: ixNpeMhSendShowReset
- */
-
-void ixNpeMhSendShowReset (
-    IxNpeMhNpeId npeId)
-{
-    /* reset the message send invocation counter */
-    ixNpeMhSendStats[npeId].sends = 0;
-
-    /* reset the message send with response invocation counter */
-    ixNpeMhSendStats[npeId].sendWithResponses = 0;
-
-    /* reset the fifo queue full occurrence counter */
-    ixNpeMhSendStats[npeId].queueFulls = 0;
-
-    /* reset the fifo queue full retry occurrence counter */
-    ixNpeMhSendStats[npeId].queueFullRetries = 0;
-
-    /* reset the max fifo queue full retries counter */
-    ixNpeMhSendStats[npeId].maxQueueFullRetries = 0;
-
-    /* reset the callback list full occurrence counter */
-    ixNpeMhSendStats[npeId].callbackFulls = 0;
-}
diff --git a/drivers/net/npe/IxNpeMhSolicitedCbMgr.c b/drivers/net/npe/IxNpeMhSolicitedCbMgr.c
deleted file mode 100644
index c539d09..0000000
--- a/drivers/net/npe/IxNpeMhSolicitedCbMgr.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/**
- * @file IxNpeMhSolicitedCbMgr.c
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the implementation of the private API for the
- * Solicited Callback Manager module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-#ifndef IXNPEMHCONFIG_P_H
-#	define IXNPEMHSOLICITEDCBMGR_C
-#else
-#	error "Error, IxNpeMhConfig_p.h should not be included before this definition."
-#endif
-
-/*
- * Put the system defined include files required.
- */
-
-
-/*
- * Put the user defined include files required.
- */
-
-#include "IxOsal.h"
-
-#include "IxNpeMhMacros_p.h"
-#include "IxNpeMhSolicitedCbMgr_p.h"
-#include "IxNpeMhConfig_p.h"
-/*
- * #defines and macros used in this file.
- */
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/**
- * @struct IxNpeMhSolicitedCallbackListEntry
- *
- * @brief This structure is used to store the information associated with
- * an entry in the callback list.  This consists of the ID of the send
- * message (which indicates the ID of the corresponding response message)
- * and the callback function pointer itself.
- *
- */
-
-typedef struct IxNpeMhSolicitedCallbackListEntry
-{
-    /** message ID */
-    IxNpeMhMessageId messageId;
-
-    /** callback function pointer */
-    IxNpeMhCallback callback;
-
-    /** pointer to next entry in the list */
-    struct IxNpeMhSolicitedCallbackListEntry *next;
-} IxNpeMhSolicitedCallbackListEntry;
-
-/**
- * @struct IxNpeMhSolicitedCallbackList
- *
- * @brief This structure is used to maintain the list of response
- * callbacks.  The number of entries in this list will be variable, and
- * they will be stored in a linked list fashion for ease of addition and
- * removal.  The entries themselves are statically allocated, and are
- * organised into a "free" list and a "callback" list.  Adding an entry
- * means taking an entry from the "free" list and adding it to the
- * "callback" list.  Removing an entry means removing it from the
- * "callback" list and returning it to the "free" list.
- */
-
-typedef struct
-{
-    /** pointer to the head of the free list */
-    IxNpeMhSolicitedCallbackListEntry *freeHead;
-
-    /** pointer to the head of the callback list */
-    IxNpeMhSolicitedCallbackListEntry *callbackHead;
-
-    /** pointer to the tail of the callback list */
-    IxNpeMhSolicitedCallbackListEntry *callbackTail;
-
-    /** array of entries - the first entry is used as a dummy entry to */
-    /* avoid the scenario of having an empty list, hence '+ 1' */
-    IxNpeMhSolicitedCallbackListEntry entries[IX_NPEMH_MAX_CALLBACKS + 1];
-} IxNpeMhSolicitedCallbackList;
-
-/**
- * @struct IxNpeMhSolicitedCbMgrStats
- *
- * @brief This structure is used to maintain statistics for the Solicited
- * Callback Manager module.
- */
-
-typedef struct
-{
-    UINT32 saves;     /**< callback list saves */
-    UINT32 retrieves; /**< callback list retrieves */
-} IxNpeMhSolicitedCbMgrStats;
-
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-
-PRIVATE IxNpeMhSolicitedCallbackList
-ixNpeMhSolicitedCbMgrCallbackLists[IX_NPEMH_NUM_NPES];
-
-PRIVATE IxNpeMhSolicitedCbMgrStats
-ixNpeMhSolicitedCbMgrStats[IX_NPEMH_NUM_NPES];
-
-/*
- * Extern function prototypes.
- */
-
-/*
- * Static function prototypes.
- */
-
-/*
- * Function definition: ixNpeMhSolicitedCbMgrInitialize
- */
-
-void ixNpeMhSolicitedCbMgrInitialize (void)
-{
-    IxNpeMhNpeId npeId;
-    UINT32 localIndex;
-    IxNpeMhSolicitedCallbackList *list = NULL;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhSolicitedCbMgrInitialize\n");
-
-    /* for each NPE ... */
-    for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++)
-    {
-        /* initialise a pointer to the list for convenience */
-        list = &ixNpeMhSolicitedCbMgrCallbackLists[npeId];
-
-        /* for each entry in the list, after the dummy entry ... */
-        for (localIndex = 1; localIndex <= IX_NPEMH_MAX_CALLBACKS; localIndex++)
-        {
-            /* initialise the entry */
-            list->entries[localIndex].messageId = 0x00;
-            list->entries[localIndex].callback = NULL;
-
-            /* if this entry is before the last entry */
-            if (localIndex < IX_NPEMH_MAX_CALLBACKS)
-            {
-                /* chain this entry to the following entry */
-                list->entries[localIndex].next = &(list->entries[localIndex + 1]);
-            }
-            else /* this entry is the last entry */
-            {
-                /* the last entry isn't chained to anything */
-                list->entries[localIndex].next = NULL;
-            }
-        }
-
-        /* set the free list pointer to point to the first real entry */
-        /* (all real entries begin chained together on the free list) */
-        list->freeHead = &(list->entries[1]);
-
-        /* set the callback list pointers to point to the dummy entry */
-        /* (the callback list is initially empty) */
-        list->callbackHead = &(list->entries[0]);
-        list->callbackTail = &(list->entries[0]);
-    }
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhSolicitedCbMgrInitialize\n");
-}
-
-/*
- * Function definition: ixNpeMhSolicitedCbMgrCallbackSave
- */
-
-IX_STATUS ixNpeMhSolicitedCbMgrCallbackSave (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId solicitedMessageId,
-    IxNpeMhCallback solicitedCallback)
-{
-    IxNpeMhSolicitedCallbackList *list = NULL;
-    IxNpeMhSolicitedCallbackListEntry *callbackEntry = NULL;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhSolicitedCbMgrCallbackSave\n");
-
-    /* initialise a pointer to the list for convenience */
-    list = &ixNpeMhSolicitedCbMgrCallbackLists[npeId];
-
-    /* check to see if there are any entries in the free list */
-    if (list->freeHead == NULL)
-    {
-        IX_NPEMH_ERROR_REPORT ("Solicited callback list is full\n");
-        return IX_FAIL;
-    }
-
-    /* there is an entry in the free list we can use */
-
-    /* update statistical info */
-    ixNpeMhSolicitedCbMgrStats[npeId].saves++;
-
-    /* remove a callback entry from the start of the free list */
-    callbackEntry = list->freeHead;
-    list->freeHead = callbackEntry->next;
-
-    /* fill in the callback entry with the new data */
-    callbackEntry->messageId = solicitedMessageId;
-    callbackEntry->callback = solicitedCallback;
-
-    /* the new callback entry will be added to the tail of the callback */
-    /* list, so it isn't chained to anything */
-    callbackEntry->next = NULL;
-
-    /* chain new callback entry to the last entry of the callback list */
-    list->callbackTail->next = callbackEntry;
-    list->callbackTail = callbackEntry;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhSolicitedCbMgrCallbackSave\n");
-
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixNpeMhSolicitedCbMgrCallbackRetrieve
- */
-
-void ixNpeMhSolicitedCbMgrCallbackRetrieve (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId solicitedMessageId,
-    IxNpeMhCallback *solicitedCallback)
-{
-    IxNpeMhSolicitedCallbackList *list = NULL;
-    IxNpeMhSolicitedCallbackListEntry *callbackEntry = NULL;
-    IxNpeMhSolicitedCallbackListEntry *previousEntry = NULL;
-
-    /* initialise a pointer to the list for convenience */
-    list = &ixNpeMhSolicitedCbMgrCallbackLists[npeId];
-
-    /* initialise the callback entry to the first entry of the callback */
-    /* list - we must skip over the dummy entry, which is the previous */
-    callbackEntry = list->callbackHead->next;
-    previousEntry = list->callbackHead;
-
-    /* traverse the callback list looking for an entry with a matching */
-    /* message ID.  note we also save the previous entry's pointer to */
-    /* allow us to unchain the matching entry from the callback list */
-    while ((callbackEntry != NULL) &&
-           (callbackEntry->messageId != solicitedMessageId))
-    {
-        previousEntry = callbackEntry;
-        callbackEntry = callbackEntry->next;
-    }
-
-    /* if we didn't find a matching callback entry */
-    if (callbackEntry == NULL)
-    {
-        /* return a NULL callback in the outgoing parameter */
-        *solicitedCallback = NULL;
-    }
-    else /* we found a matching callback entry */
-    {
-        /* update statistical info */
-        ixNpeMhSolicitedCbMgrStats[npeId].retrieves++;
-
-        /* return the callback in the outgoing parameter */
-        *solicitedCallback = callbackEntry->callback;
-
-        /* unchain callback entry by chaining previous entry to next */
-        previousEntry->next = callbackEntry->next;
-
-        /* if the callback entry is at the tail of the list */
-        if (list->callbackTail == callbackEntry)
-        {
-            /* update the tail of the callback list */
-            list->callbackTail = previousEntry;
-        }
-
-        /* re-initialise the callback entry */
-        callbackEntry->messageId = 0x00;
-        callbackEntry->callback = NULL;
-
-        /* add the callback entry to the start of the free list */
-        callbackEntry->next = list->freeHead;
-        list->freeHead = callbackEntry;
-    }
-}
-
-/*
- * Function definition: ixNpeMhSolicitedCbMgrShow
- */
-
-void ixNpeMhSolicitedCbMgrShow (
-    IxNpeMhNpeId npeId)
-{
-    /* show the solicited callback list save counter */
-    IX_NPEMH_SHOW ("Solicited callback list saves",
-                   ixNpeMhSolicitedCbMgrStats[npeId].saves);
-
-    /* show the solicited callback list retrieve counter */
-    IX_NPEMH_SHOW ("Solicited callback list retrieves",
-                   ixNpeMhSolicitedCbMgrStats[npeId].retrieves);
-}
-
-/*
- * Function definition: ixNpeMhSolicitedCbMgrShowReset
- */
-
-void ixNpeMhSolicitedCbMgrShowReset (
-    IxNpeMhNpeId npeId)
-{
-    /* reset the solicited callback list save counter */
-    ixNpeMhSolicitedCbMgrStats[npeId].saves = 0;
-
-    /* reset the solicited callback list retrieve counter */
-    ixNpeMhSolicitedCbMgrStats[npeId].retrieves = 0;
-}
diff --git a/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c b/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c
deleted file mode 100644
index 082f677..0000000
--- a/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/**
- * @file IxNpeMhUnsolicitedCbMgr.c
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the implementation of the private API for
- * the Unsolicited Callback Manager module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * Put the system defined include files required.
- */
-
-
-/*
- * Put the user defined include files required.
- */
-#include "IxOsal.h"
-
-#include "IxNpeMhMacros_p.h"
-
-#include "IxNpeMhUnsolicitedCbMgr_p.h"
-
-
-/*
- * #defines and macros used in this file.
- */
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/**
- * @struct IxNpeMhUnsolicitedCallbackTable
- *
- * @brief This structure is used to maintain the list of registered
- * callbacks.  One entry exists for each message ID, and a NULL entry will
- * signify that no callback has been registered for that ID.
- */
-
-typedef struct
-{
-    /** array of entries */
-    IxNpeMhCallback entries[IX_NPEMH_MAX_MESSAGE_ID + 1];
-} IxNpeMhUnsolicitedCallbackTable;
-
-/**
- * @struct IxNpeMhUnsolicitedCbMgrStats
- *
- * @brief This structure is used to maintain statistics for the Unsolicited
- * Callback Manager module.
- */
-
-typedef struct
-{
-    UINT32 saves;      /**< callback table saves */
-    UINT32 overwrites; /**< callback table overwrites */
-} IxNpeMhUnsolicitedCbMgrStats;
-
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-
-PRIVATE IxNpeMhUnsolicitedCallbackTable
-ixNpeMhUnsolicitedCallbackTables[IX_NPEMH_NUM_NPES];
-
-PRIVATE IxNpeMhUnsolicitedCbMgrStats
-ixNpeMhUnsolicitedCbMgrStats[IX_NPEMH_NUM_NPES];
-
-/*
- * Extern function prototypes.
- */
-
-/*
- * Static function prototypes.
- */
-
-/*
- * Function definition: ixNpeMhUnsolicitedCbMgrInitialize
- */
-
-void ixNpeMhUnsolicitedCbMgrInitialize (void)
-{
-    IxNpeMhNpeId npeId = 0;
-    IxNpeMhUnsolicitedCallbackTable *table = NULL;
-    IxNpeMhMessageId messageId = 0;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhUnsolicitedCbMgrInitialize\n");
-
-    /* for each NPE ... */
-    for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++)
-    {
-        /* initialise a pointer to the table for convenience */
-        table = &ixNpeMhUnsolicitedCallbackTables[npeId];
-
-        /* for each message ID ... */
-        for (messageId = IX_NPEMH_MIN_MESSAGE_ID;
-             messageId <= IX_NPEMH_MAX_MESSAGE_ID; messageId++)
-        {
-            /* initialise the callback for this message ID to NULL */
-            table->entries[messageId] = NULL;
-        }
-    }
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhUnsolicitedCbMgrInitialize\n");
-}
-
-/*
- * Function definition: ixNpeMhUnsolicitedCbMgrCallbackSave
- */
-
-void ixNpeMhUnsolicitedCbMgrCallbackSave (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId unsolicitedMessageId,
-    IxNpeMhCallback unsolicitedCallback)
-{
-    IxNpeMhUnsolicitedCallbackTable *table = NULL;
-
-    /* initialise a pointer to the table for convenience */
-    table = &ixNpeMhUnsolicitedCallbackTables[npeId];
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering "
-                     "ixNpeMhUnsolicitedCbMgrCallbackSave\n");
-
-    /* update statistical info */
-    ixNpeMhUnsolicitedCbMgrStats[npeId].saves++;
-
-    /* check if there is a callback already registered for this NPE and */
-    /* message ID */
-    if (table->entries[unsolicitedMessageId] != NULL)
-    {
-	/* if we are overwriting an existing callback */
-	if (unsolicitedCallback != NULL)
-	{
-	    IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "Unsolicited callback "
-			     "overwriting existing callback for NPE ID %d "
-			     "message ID 0x%02X\n", npeId, unsolicitedMessageId);
-	}
-	else /* if we are clearing an existing callback */
-	{
-	    IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NULL unsolicited callback "
-			     "clearing existing callback for NPE ID %d "
-			     "message ID 0x%02X\n", npeId, unsolicitedMessageId);
-	}
-
-        /* update statistical info */
-        ixNpeMhUnsolicitedCbMgrStats[npeId].overwrites++;
-    }
-
-    /* save the callback into the table */
-    table->entries[unsolicitedMessageId] = unsolicitedCallback;
-
-    IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting "
-                     "ixNpeMhUnsolicitedCbMgrCallbackSave\n");
-}
-
-/*
- * Function definition: ixNpeMhUnsolicitedCbMgrCallbackRetrieve
- */
-
-void ixNpeMhUnsolicitedCbMgrCallbackRetrieve (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId unsolicitedMessageId,
-    IxNpeMhCallback *unsolicitedCallback)
-{
-    IxNpeMhUnsolicitedCallbackTable *table = NULL;
-
-    /* initialise a pointer to the table for convenience */
-    table = &ixNpeMhUnsolicitedCallbackTables[npeId];
-
-    /* retrieve the callback from the table */
-    *unsolicitedCallback = table->entries[unsolicitedMessageId];
-}
-
-/*
- * Function definition: ixNpeMhUnsolicitedCbMgrShow
- */
-
-void ixNpeMhUnsolicitedCbMgrShow (
-    IxNpeMhNpeId npeId)
-{
-    /* show the unsolicited callback table save counter */
-    IX_NPEMH_SHOW ("Unsolicited callback table saves",
-                   ixNpeMhUnsolicitedCbMgrStats[npeId].saves);
-
-    /* show the unsolicited callback table overwrite counter */
-    IX_NPEMH_SHOW ("Unsolicited callback table overwrites",
-                   ixNpeMhUnsolicitedCbMgrStats[npeId].overwrites);
-}
-
-/*
- * Function definition: ixNpeMhUnsolicitedCbMgrShowReset
- */
-
-void ixNpeMhUnsolicitedCbMgrShowReset (
-    IxNpeMhNpeId npeId)
-{
-    /* reset the unsolicited callback table save counter */
-    ixNpeMhUnsolicitedCbMgrStats[npeId].saves = 0;
-
-    /* reset the unsolicited callback table overwrite counter */
-    ixNpeMhUnsolicitedCbMgrStats[npeId].overwrites = 0;
-}
diff --git a/drivers/net/npe/IxOsalBufferMgt.c b/drivers/net/npe/IxOsalBufferMgt.c
deleted file mode 100644
index f70ba05..0000000
--- a/drivers/net/npe/IxOsalBufferMgt.c
+++ /dev/null
@@ -1,776 +0,0 @@
-/**
- * @file IxOsalBufferMgt.c
- *
- * @brief Default buffer pool management and buffer management
- *        Implementation.
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/*
- * OS may choose to use default bufferMgt by defining
- * IX_OSAL_USE_DEFAULT_BUFFER_MGT in IxOsalOsBufferMgt.h  
- */
-
-#include "IxOsal.h"
-
-#define IX_OSAL_BUFFER_FREE_PROTECTION  /* Define this to enable Illegal MBuf Freed Protection*/
-
-/*
- * The implementation is only used when the following
- * is defined.
- */
-#ifdef IX_OSAL_USE_DEFAULT_BUFFER_MGT
-
-
-#define IX_OSAL_MBUF_SYS_SIGNATURE				(0x8BADF00D)
-#define IX_OSAL_MBUF_SYS_SIGNATURE_MASK				(0xEFFFFFFF)
-#define IX_OSAL_MBUF_USED_FLAG					(0x10000000)
-#define IX_OSAL_MBUF_SYS_SIGNATURE_INIT(bufPtr)        		IX_OSAL_MBUF_SIGNATURE (bufPtr) = (UINT32)IX_OSAL_MBUF_SYS_SIGNATURE
-
-/* 
-*  This implementation is protect, the buffer pool management's  ixOsalMBufFree 
-*  against an invalid MBUF pointer argument that already has been freed earlier 
-*  or in other words resides in the free pool of MBUFs. This added feature, 
-*  checks the MBUF "USED" FLAG. The Flag tells if the MBUF is still not freed 
-*  back to the Buffer Pool.
-*  Disable this feature for performance reasons by undef 
-*  IX_OSAL_BUFFER_FREE_PROTECTION macro.
-*/
-#ifdef IX_OSAL_BUFFER_FREE_PROTECTION  /*IX_OSAL_BUFFER_FREE_PROTECTION With Buffer Free protection*/
-
-#define IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr)		(IX_OSAL_MBUF_SIGNATURE (bufPtr)&(IX_OSAL_MBUF_SYS_SIGNATURE_MASK) )
-#define IX_OSAL_MBUF_SET_SYS_SIGNATURE(bufPtr)    do {																											\
-																									IX_OSAL_MBUF_SIGNATURE (bufPtr)&(~IX_OSAL_MBUF_SYS_SIGNATURE_MASK);\
-														    									IX_OSAL_MBUF_SIGNATURE (bufPtr)|=IX_OSAL_MBUF_SYS_SIGNATURE;			\
-																									}while(0)
-
-#define IX_OSAL_MBUF_SET_USED_FLAG(bufPtr)   IX_OSAL_MBUF_SIGNATURE (bufPtr)|=IX_OSAL_MBUF_USED_FLAG
-#define IX_OSAL_MBUF_CLEAR_USED_FLAG(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr)&=~IX_OSAL_MBUF_USED_FLAG
-#define IX_OSAL_MBUF_ISSET_USED_FLAG(bufPtr) (IX_OSAL_MBUF_SIGNATURE (bufPtr)&IX_OSAL_MBUF_USED_FLAG)
-
-#else
-
-#define IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr)	 IX_OSAL_MBUF_SIGNATURE (bufPtr)
-#define IX_OSAL_MBUF_SET_SYS_SIGNATURE(bufPtr)   IX_OSAL_MBUF_SIGNATURE (bufPtr) = IX_OSAL_MBUF_SYS_SIGNATURE
-
-#endif /*IX_OSAL_BUFFER_FREE_PROTECTION With Buffer Free protection*/
-/*
- * Variable declarations global to this file only.  Externs are followed by
- * static variables.
- */
-
-/* 
- * A unit of 32, used to provide bit-shift for pool
- * management. Needs some work if users want more than 32 pools.
- */
-#define IX_OSAL_BUFF_FREE_BITS 32
-
-PRIVATE UINT32 ixOsalBuffFreePools[IX_OSAL_MBUF_MAX_POOLS /
-    IX_OSAL_BUFF_FREE_BITS];
-
-PUBLIC IX_OSAL_MBUF_POOL ixOsalBuffPools[IX_OSAL_MBUF_MAX_POOLS];
-
-static int ixOsalBuffPoolsInUse = 0;
-
-#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY
-PRIVATE IX_OSAL_MBUF *
-ixOsalBuffPoolMbufInit (UINT32 mbufSizeAligned,
-                      UINT32 dataSizeAligned,
-                      IX_OSAL_MBUF_POOL *poolPtr);
-#endif
-
-PRIVATE IX_OSAL_MBUF_POOL * ixOsalPoolAlloc (void);                      
-
-/*
- * Function definition: ixOsalPoolAlloc
- */
-
-/****************************/
-
-PRIVATE IX_OSAL_MBUF_POOL *
-ixOsalPoolAlloc (void)
-{
-    register unsigned int i = 0;
-
-    /*
-     * Scan for the first free buffer. Free buffers are indicated by 0
-     * on the corrsponding bit in ixOsalBuffFreePools. 
-     */
-    if (ixOsalBuffPoolsInUse >= IX_OSAL_MBUF_MAX_POOLS)
-    {
-        /*
-         * Fail to grab a ptr this time 
-         */
-        return NULL;
-    }
-
-    while (ixOsalBuffFreePools[i / IX_OSAL_BUFF_FREE_BITS] &
-        (1 << (i % IX_OSAL_BUFF_FREE_BITS)))
-        i++;
-    /*
-     * Free buffer found. Mark it as busy and initialize. 
-     */
-    ixOsalBuffFreePools[i / IX_OSAL_BUFF_FREE_BITS] |=
-        (1 << (i % IX_OSAL_BUFF_FREE_BITS));
-
-    memset (&ixOsalBuffPools[i], 0, sizeof (IX_OSAL_MBUF_POOL));
-
-    ixOsalBuffPools[i].poolIdx = i;
-    ixOsalBuffPoolsInUse++;
-
-    return &ixOsalBuffPools[i];
-}
-
-
-#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY
-PRIVATE IX_OSAL_MBUF *
-ixOsalBuffPoolMbufInit (UINT32 mbufSizeAligned,
-                      UINT32 dataSizeAligned,
-                      IX_OSAL_MBUF_POOL *poolPtr)
-{
-    UINT8 *dataPtr;
-    IX_OSAL_MBUF *realMbufPtr;
-    /* Allocate cache-aligned memory for mbuf header */
-    realMbufPtr = (IX_OSAL_MBUF *) IX_OSAL_CACHE_DMA_MALLOC (mbufSizeAligned);
-    IX_OSAL_ASSERT (realMbufPtr != NULL);
-    memset (realMbufPtr, 0, mbufSizeAligned);
-
-    /* Allocate cache-aligned memory for mbuf data */
-    dataPtr = (UINT8 *) IX_OSAL_CACHE_DMA_MALLOC (dataSizeAligned);
-    IX_OSAL_ASSERT (dataPtr != NULL);
-    memset (dataPtr, 0, dataSizeAligned);
-
-    /* Fill in mbuf header fields */
-    IX_OSAL_MBUF_MDATA (realMbufPtr) = dataPtr;
-    IX_OSAL_MBUF_ALLOCATED_BUFF_DATA (realMbufPtr) = (UINT32)dataPtr;
-
-    IX_OSAL_MBUF_MLEN (realMbufPtr) = dataSizeAligned;
-    IX_OSAL_MBUF_ALLOCATED_BUFF_LEN (realMbufPtr) = dataSizeAligned;
-
-    IX_OSAL_MBUF_NET_POOL (realMbufPtr) = (IX_OSAL_MBUF_POOL *) poolPtr;
-
-    IX_OSAL_MBUF_SYS_SIGNATURE_INIT(realMbufPtr);
-
-    /* update some statistical information */
-    poolPtr->mbufMemSize += mbufSizeAligned;
-    poolPtr->dataMemSize += dataSizeAligned;
-
-    return realMbufPtr;
-}
-#endif /* #ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY */
-
-/*
- * Function definition: ixOsalBuffPoolInit
- */
-
-PUBLIC IX_OSAL_MBUF_POOL *
-ixOsalPoolInit (UINT32 count, UINT32 size, const char *name)
-{
-
-    /* These variables are only used if UX_OSAL_BUFFER_ALLOC_SEPERATELY
-     * is defined .
-     */
-#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY
-    UINT32 i, mbufSizeAligned, dataSizeAligned;
-    IX_OSAL_MBUF *currentMbufPtr = NULL;
-#else
-    void *poolBufPtr;
-    void *poolDataPtr;
-    int mbufMemSize;
-    int dataMemSize;
-#endif
-
-    IX_OSAL_MBUF_POOL *poolPtr = NULL;
-    
-    if (count <= 0)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalPoolInit(): " "count = 0 \n", 0, 0, 0, 0, 0, 0);
-        return NULL;        
-    }
-
-    if (name == NULL)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalPoolInit(): " "NULL name \n", 0, 0, 0, 0, 0, 0);
-        return NULL;        
-    }
-    
-    if (strlen (name) > IX_OSAL_MBUF_POOL_NAME_LEN)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalPoolInit(): "
-            "ERROR - name length should be no greater than %d  \n",
-            IX_OSAL_MBUF_POOL_NAME_LEN, 0, 0, 0, 0, 0);
-        return NULL;
-    }
-
-/* OS can choose whether to allocate all buffers all together (if it 
- * can handle a huge single alloc request), or to allocate buffers 
- * separately by the defining IX_OSAL_BUFFER_ALLOC_SEPARATELY.
- */
-#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY
-    /* Get a pool Ptr */
-    poolPtr = ixOsalPoolAlloc ();
-
-    if (poolPtr == NULL)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalPoolInit(): " "Fail to Get PoolPtr \n", 0, 0, 0, 0, 0, 0);    
-        return NULL;
-    }
-
-    mbufSizeAligned = IX_OSAL_MBUF_POOL_SIZE_ALIGN (sizeof (IX_OSAL_MBUF));
-    dataSizeAligned = IX_OSAL_MBUF_POOL_SIZE_ALIGN(size);
-
-    poolPtr->nextFreeBuf = NULL;    
-    poolPtr->mbufMemPtr = NULL;    
-    poolPtr->dataMemPtr = NULL;
-    poolPtr->bufDataSize = dataSizeAligned;
-    poolPtr->totalBufsInPool = count;
-    poolPtr->poolAllocType = IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC;
-    strcpy (poolPtr->name, name);
-
-
-    for (i = 0; i < count; i++)
-    {
-	    /* create an mbuf */
-	    currentMbufPtr = ixOsalBuffPoolMbufInit (mbufSizeAligned,
-					         dataSizeAligned,
-					         poolPtr);
-
-#ifdef IX_OSAL_BUFFER_FREE_PROTECTION 		
-/* Set the Buffer USED Flag. If not, ixOsalMBufFree will fail.
-   ixOsalMbufFree used here is in a special case whereby, it's 
-   used to add MBUF to the Pool. By specification, ixOsalMbufFree 
-   deallocates an allocated MBUF from Pool.
-*/ 			         
-      IX_OSAL_MBUF_SET_USED_FLAG(currentMbufPtr);
-#endif                             
-	    /* Add it to the pool */
-	    ixOsalMbufFree (currentMbufPtr);
-
-	    /* flush the pool information to RAM */
-	    IX_OSAL_CACHE_FLUSH (currentMbufPtr, mbufSizeAligned);
-    }
-    
-    /*
-     * update the number of free buffers in the pool 
-     */
-    poolPtr->freeBufsInPool = count;
-
-#else 
-/* Otherwise allocate buffers in a continuous block fashion */    
-    poolBufPtr = IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC (count, mbufMemSize);
-    IX_OSAL_ASSERT (poolBufPtr != NULL);
-    poolDataPtr =
-        IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC (count, size, dataMemSize);
-    IX_OSAL_ASSERT (poolDataPtr != NULL);
-
-    poolPtr = ixOsalNoAllocPoolInit (poolBufPtr, poolDataPtr,
-        count, size, name);
-    if (poolPtr == NULL)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalPoolInit(): " "Fail to get pool ptr \n", 0, 0, 0, 0, 0, 0);
-        return NULL;
-    }
-
-    poolPtr->poolAllocType = IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC;
-
-#endif /* IX_OSAL_BUFFER_ALLOC_SEPARATELY */
-    return poolPtr;
-}
-
-PUBLIC IX_OSAL_MBUF_POOL *
-ixOsalNoAllocPoolInit (void *poolBufPtr,
-    void *poolDataPtr, UINT32 count, UINT32 size, const char *name)
-{
-    UINT32 i,  mbufSizeAligned, sizeAligned;
-    IX_OSAL_MBUF *currentMbufPtr = NULL;
-    IX_OSAL_MBUF *nextMbufPtr = NULL;
-    IX_OSAL_MBUF_POOL *poolPtr = NULL;
-
-    /*
-     * check parameters 
-     */
-    if (poolBufPtr == NULL)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalNoAllocPoolInit(): "
-            "ERROR - NULL poolBufPtr \n", 0, 0, 0, 0, 0, 0);
-        return NULL;
-    }
-
-    if (count <= 0)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalNoAllocPoolInit(): "
-            "ERROR - count must > 0   \n", 0, 0, 0, 0, 0, 0);
-        return NULL;
-    }
-
-    if (name == NULL)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalNoAllocPoolInit(): "
-            "ERROR - NULL name ptr  \n", 0, 0, 0, 0, 0, 0);
-        return NULL;
-    }
-
-    if (strlen (name) > IX_OSAL_MBUF_POOL_NAME_LEN)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalNoAllocPoolInit(): "
-            "ERROR - name length should be no greater than %d  \n",
-            IX_OSAL_MBUF_POOL_NAME_LEN, 0, 0, 0, 0, 0);
-        return NULL;
-    }
-
-    poolPtr = ixOsalPoolAlloc ();
-
-    if (poolPtr == NULL)
-    {
-        return NULL;
-    }
-
-    /*
-     * Adjust sizes to ensure alignment on cache line boundaries 
-     */
-    mbufSizeAligned =
-        IX_OSAL_MBUF_POOL_SIZE_ALIGN (sizeof (IX_OSAL_MBUF));
-    /*
-     * clear the mbuf memory area 
-     */
-    memset (poolBufPtr, 0, mbufSizeAligned * count);
-
-    if (poolDataPtr != NULL)
-    {
-        /*
-         * Adjust sizes to ensure alignment on cache line boundaries 
-         */
-        sizeAligned = IX_OSAL_MBUF_POOL_SIZE_ALIGN (size);
-        /*
-         * clear the data memory area 
-         */
-        memset (poolDataPtr, 0, sizeAligned * count);
-    }
-    else
-    {
-        sizeAligned = 0;
-    }
-
-    /*
-     * initialise pool fields 
-     */
-    strcpy ((poolPtr)->name, name);
-
-    poolPtr->dataMemPtr = poolDataPtr;
-    poolPtr->mbufMemPtr = poolBufPtr;
-    poolPtr->bufDataSize = sizeAligned;
-    poolPtr->totalBufsInPool = count;
-    poolPtr->mbufMemSize = mbufSizeAligned * count;
-    poolPtr->dataMemSize = sizeAligned * count;
-
-    currentMbufPtr = (IX_OSAL_MBUF *) poolBufPtr;
-
-    poolPtr->nextFreeBuf = currentMbufPtr;
-
-    for (i = 0; i < count; i++)
-    {
-        if (i < (count - 1))
-        {
-            nextMbufPtr =
-                (IX_OSAL_MBUF *) ((unsigned) currentMbufPtr +
-                mbufSizeAligned);
-        }
-        else
-        {                       /* last mbuf in chain */
-            nextMbufPtr = NULL;
-        }
-        IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (currentMbufPtr) = nextMbufPtr;
-        IX_OSAL_MBUF_NET_POOL (currentMbufPtr) = poolPtr;
-
-        IX_OSAL_MBUF_SYS_SIGNATURE_INIT(currentMbufPtr);
-
-        if (poolDataPtr != NULL)
-        {
-            IX_OSAL_MBUF_MDATA (currentMbufPtr) = poolDataPtr;
-            IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(currentMbufPtr) = (UINT32) poolDataPtr;
-
-            IX_OSAL_MBUF_MLEN (currentMbufPtr) = sizeAligned;
-            IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(currentMbufPtr) = sizeAligned;
-
-            poolDataPtr = (void *) ((unsigned) poolDataPtr + sizeAligned);
-        }
-
-        currentMbufPtr = nextMbufPtr;
-    }
-
-    /*
-     * update the number of free buffers in the pool 
-     */
-    poolPtr->freeBufsInPool = count;
-
-    poolPtr->poolAllocType = IX_OSAL_MBUF_POOL_TYPE_USER_ALLOC;
-
-    return poolPtr;
-}
-
-/* 
- * Get a mbuf ptr from the pool
- */
-PUBLIC IX_OSAL_MBUF *
-ixOsalMbufAlloc (IX_OSAL_MBUF_POOL * poolPtr)
-{
-    int lock;
-    IX_OSAL_MBUF *newBufPtr = NULL;
-
-    /*
-     * check parameters 
-     */
-    if (poolPtr == NULL)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalMbufAlloc(): "
-            "ERROR - Invalid Parameter\n", 0, 0, 0, 0, 0, 0);
-        return NULL;
-    }
-
-    lock = ixOsalIrqLock ();
-
-    newBufPtr = poolPtr->nextFreeBuf;
-    if (newBufPtr)
-    {
-        poolPtr->nextFreeBuf =
-            IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (newBufPtr);
-        IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (newBufPtr) = NULL;
-
-        /*
-         * update the number of free buffers in the pool 
-         */
-        poolPtr->freeBufsInPool--;
-    }
-    else
-    {
-        /* Return NULL to indicate to caller that request is denied. */
-        ixOsalIrqUnlock (lock);
-
-        return NULL;
-    }
-
-#ifdef IX_OSAL_BUFFER_FREE_PROTECTION
-	/* Set Buffer Used Flag to indicate state.*/
-    IX_OSAL_MBUF_SET_USED_FLAG(newBufPtr);
-#endif
-
-    ixOsalIrqUnlock (lock);
-
-    return newBufPtr;
-}
-
-PUBLIC IX_OSAL_MBUF *
-ixOsalMbufFree (IX_OSAL_MBUF * bufPtr)
-{
-    int lock;
-    IX_OSAL_MBUF_POOL *poolPtr;
-
-    IX_OSAL_MBUF *nextBufPtr = NULL;
-
-    /*
-     * check parameters 
-     */
-    if (bufPtr == NULL)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalMbufFree(): "
-            "ERROR - Invalid Parameter\n", 0, 0, 0, 0, 0, 0);
-        return NULL;
-    }
-
-
-
-    lock = ixOsalIrqLock ();
-
-#ifdef IX_OSAL_BUFFER_FREE_PROTECTION
-	
-	/* Prevention for Buffer freed more than once*/
-    if(!IX_OSAL_MBUF_ISSET_USED_FLAG(bufPtr))
-    {
-   	return NULL;
-    }
-    IX_OSAL_MBUF_CLEAR_USED_FLAG(bufPtr);
-#endif
-	
-    poolPtr = IX_OSAL_MBUF_NET_POOL (bufPtr);
-
-    /*
-     * check the mbuf wrapper signature (if mbuf wrapper was used) 
-     */
-    if (poolPtr->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC)
-    {
-        IX_OSAL_ENSURE ( (IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr) == IX_OSAL_MBUF_SYS_SIGNATURE),
-            "ixOsalBuffPoolBufFree: ERROR - Invalid mbuf signature.");
-    }
-
-    nextBufPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (bufPtr);
-
-    IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (bufPtr) = poolPtr->nextFreeBuf;
-    poolPtr->nextFreeBuf = bufPtr;
-
-    /*
-     * update the number of free buffers in the pool 
-     */
-    poolPtr->freeBufsInPool++;
-
-    ixOsalIrqUnlock (lock);
-
-    return nextBufPtr;
-}
-
-PUBLIC void
-ixOsalMbufChainFree (IX_OSAL_MBUF * bufPtr)
-{
-    while ((bufPtr = ixOsalMbufFree (bufPtr)));
-}
-
-/*
- * Function definition: ixOsalBuffPoolShow
- */
-PUBLIC void
-ixOsalMbufPoolShow (IX_OSAL_MBUF_POOL * poolPtr)
-{
-    IX_OSAL_MBUF *nextBufPtr;
-    int count = 0;
-    int lock;
-
-    /*
-     * check parameters 
-     */
-    if (poolPtr == NULL)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalBuffPoolShow(): "
-            "ERROR - Invalid Parameter", 0, 0, 0, 0, 0, 0);
-        /*
-         * return IX_FAIL; 
-         */
-        return;
-    }
-
-    lock = ixOsalIrqLock ();
-    count = poolPtr->freeBufsInPool;
-    nextBufPtr = poolPtr->nextFreeBuf;
-    ixOsalIrqUnlock (lock);
-
-    ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE,
-        IX_OSAL_LOG_DEV_STDOUT, "=== POOL INFORMATION ===\n", 0, 0, 0,
-        0, 0, 0);
-    ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT,
-        "Pool Name:                   %s\n",
-        (unsigned int) poolPtr->name, 0, 0, 0, 0, 0);
-    ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT,
-        "Pool Allocation Type:        %d\n",
-        (unsigned int) poolPtr->poolAllocType, 0, 0, 0, 0, 0);
-    ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT,
-        "Pool Mbuf Mem Usage (bytes): %d\n",
-        (unsigned int) poolPtr->mbufMemSize, 0, 0, 0, 0, 0);
-    ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT,
-        "Pool Data Mem Usage (bytes): %d\n",
-        (unsigned int) poolPtr->dataMemSize, 0, 0, 0, 0, 0);
-    ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT,
-        "Mbuf Data Capacity  (bytes): %d\n",
-        (unsigned int) poolPtr->bufDataSize, 0, 0, 0, 0, 0);
-    ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT,
-        "Total Mbufs in Pool:         %d\n",
-        (unsigned int) poolPtr->totalBufsInPool, 0, 0, 0, 0, 0);
-    ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT,
-        "Available Mbufs:             %d\n", (unsigned int) count, 0,
-        0, 0, 0, 0);
-    ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT,
-        "Next Available Mbuf:         %p\n", (unsigned int) nextBufPtr,
-        0, 0, 0, 0, 0);
-
-    if (poolPtr->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_USER_ALLOC)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "Mbuf Mem Area Start address: %p\n",
-            (unsigned int) poolPtr->mbufMemPtr, 0, 0, 0, 0, 0);
-        ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT,
-            "Data Mem Area Start address: %p\n",
-            (unsigned int) poolPtr->dataMemPtr, 0, 0, 0, 0, 0);
-    }
-}
-
-PUBLIC void
-ixOsalMbufDataPtrReset (IX_OSAL_MBUF * bufPtr)
-{
-    IX_OSAL_MBUF_POOL *poolPtr;
-    UINT8 *poolDataPtr;
-
-    if (bufPtr == NULL)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalBuffPoolBufDataPtrReset"
-            ": ERROR - Invalid Parameter\n", 0, 0, 0, 0, 0, 0);
-        return;
-    }
-
-    poolPtr = (IX_OSAL_MBUF_POOL *) IX_OSAL_MBUF_NET_POOL (bufPtr);
-    poolDataPtr = poolPtr->dataMemPtr;
-
-    if (poolPtr->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC)
-    {
-        if (IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr) != IX_OSAL_MBUF_SYS_SIGNATURE)
-        {
-            ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT,
-                "ixOsalBuffPoolBufDataPtrReset"
-                ": invalid mbuf, cannot reset mData pointer\n", 0, 0,
-                0, 0, 0, 0);
-            return;
-        }
-        IX_OSAL_MBUF_MDATA (bufPtr) = (UINT8*)IX_OSAL_MBUF_ALLOCATED_BUFF_DATA (bufPtr);
-    }
-    else
-    {
-        if (poolDataPtr)
-        {
-            unsigned int bufSize = poolPtr->bufDataSize;
-            unsigned int bufDataAddr =
-                (unsigned int) IX_OSAL_MBUF_MDATA (bufPtr);
-            unsigned int poolDataAddr = (unsigned int) poolDataPtr;
-
-            /*
-             * the pointer is still pointing somewhere in the mbuf payload.
-             * This operation moves the pointer to the beginning of the 
-             * mbuf payload
-             */
-            bufDataAddr = ((bufDataAddr - poolDataAddr) / bufSize) * bufSize;
-            IX_OSAL_MBUF_MDATA (bufPtr) = &poolDataPtr[bufDataAddr];
-        }
-        else
-        {
-            ixOsalLog (IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT,
-                "ixOsalBuffPoolBufDataPtrReset"
-                ": cannot be used if user supplied NULL pointer for pool data area "
-                "when pool was created\n", 0, 0, 0, 0, 0, 0);
-            return;
-        }
-    }
-
-}
-
-/*
- * Function definition: ixOsalBuffPoolUninit
- */
-PUBLIC IX_STATUS
-ixOsalBuffPoolUninit (IX_OSAL_MBUF_POOL * pool)
-{
-    if (!pool)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalBuffPoolUninit: NULL ptr \n", 0, 0, 0, 0, 0, 0);
-        return IX_FAIL;
-    }
-
-    if (pool->freeBufsInPool != pool->totalBufsInPool)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalBuffPoolUninit: need to return all ptrs to the pool first! \n",
-            0, 0, 0, 0, 0, 0);
-        return IX_FAIL;
-    }
-
-    if (pool->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC)
-    {
-#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY
-				UINT32 i;
-				IX_OSAL_MBUF* pBuf;
-				
-				pBuf = pool->nextFreeBuf;
-				/* Freed the Buffer one by one till all the Memory is freed*/
-				for (i= pool->freeBufsInPool; i >0 && pBuf!=NULL ;i--){
-						IX_OSAL_MBUF* pBufTemp;
-						pBufTemp = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(pBuf);
-						/* Freed MBUF Data Memory area*/
-						IX_OSAL_CACHE_DMA_FREE( (void *) (IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(pBuf)) );
-						/* Freed MBUF Struct Memory area*/
-						IX_OSAL_CACHE_DMA_FREE(pBuf);
-						pBuf = pBufTemp;
-				}
-				
-#else    	
-        IX_OSAL_CACHE_DMA_FREE (pool->mbufMemPtr);
-        IX_OSAL_CACHE_DMA_FREE (pool->dataMemPtr);
-#endif        
-    }
-
-    ixOsalBuffFreePools[pool->poolIdx / IX_OSAL_BUFF_FREE_BITS] &=
-        ~(1 << (pool->poolIdx % IX_OSAL_BUFF_FREE_BITS));
-    ixOsalBuffPoolsInUse--;
-    return IX_SUCCESS;
-}
-
-/*
- * Function definition: ixOsalBuffPoolDataAreaSizeGet
- */
-PUBLIC UINT32
-ixOsalBuffPoolDataAreaSizeGet (int count, int size)
-{
-    UINT32 memorySize;
-    memorySize = count * IX_OSAL_MBUF_POOL_SIZE_ALIGN (size);
-    return memorySize;
-}
-
-/*
- * Function definition: ixOsalBuffPoolMbufAreaSizeGet
- */
-PUBLIC UINT32
-ixOsalBuffPoolMbufAreaSizeGet (int count)
-{
-    UINT32 memorySize;
-    memorySize =
-        count * IX_OSAL_MBUF_POOL_SIZE_ALIGN (sizeof (IX_OSAL_MBUF));
-    return memorySize;
-}
-
-/*
- * Function definition: ixOsalBuffPoolFreeCountGet
- */
-PUBLIC UINT32 ixOsalBuffPoolFreeCountGet(IX_OSAL_MBUF_POOL * poolPtr)
-
-{
-
-   return poolPtr->freeBufsInPool;
-
-}
-
-#endif /* IX_OSAL_USE_DEFAULT_BUFFER_MGT */
diff --git a/drivers/net/npe/IxOsalIoMem.c b/drivers/net/npe/IxOsalIoMem.c
deleted file mode 100644
index bf3acdc..0000000
--- a/drivers/net/npe/IxOsalIoMem.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/**
- * @file IxOsalIoMem.c 
- *
- * @brief OS-independent IO/Mem implementation 
- * 
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/* Access to the global mem map is only allowed in this file */
-#define IxOsalIoMem_C
-
-#include "IxOsal.h"
-
-#define SEARCH_PHYSICAL_ADDRESS (1)
-#define SEARCH_VIRTUAL_ADDRESS  (2)
-
-/*
- * Searches for map using one of the following criteria:
- * 
- * - enough room to include a zone starting with the physical "requestedAddress" of size "size" (for mapping)
- * - includes the virtual "requestedAddress" in its virtual address space (already mapped, for unmapping)
- * - correct coherency
- *
- * Returns a pointer to the map or NULL if a suitable map is not found.
- */
-PRIVATE IxOsalMemoryMap *
-ixOsalMemMapFind (UINT32 requestedAddress,
-    UINT32 size, UINT32 searchCriteria, UINT32 requestedEndianType)
-{
-    UINT32 mapIndex;
-
-    UINT32 numMapElements = ARRAY_SIZE(ixOsalGlobalMemoryMap);
-
-    for (mapIndex = 0; mapIndex < numMapElements; mapIndex++)
-    {
-        IxOsalMemoryMap *map = &ixOsalGlobalMemoryMap[mapIndex];
-
-        if (searchCriteria == SEARCH_PHYSICAL_ADDRESS
-            && requestedAddress >= map->physicalAddress
-            && (requestedAddress + size) <= (map->physicalAddress + map->size)
-            && (map->mapEndianType & requestedEndianType) != 0)
-        {
-            return map;
-        }
-        else if (searchCriteria == SEARCH_VIRTUAL_ADDRESS
-            && requestedAddress >= map->virtualAddress
-            && requestedAddress <= (map->virtualAddress + map->size)
-            && (map->mapEndianType & requestedEndianType) != 0)
-        {
-            return map;
-        }
-        else if (searchCriteria == SEARCH_PHYSICAL_ADDRESS)
-        {
-            ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3,
-                IX_OSAL_LOG_DEV_STDOUT,
-                "Osal: Checking [phys addr 0x%x:size 0x%x:endianType %d]\n",
-                map->physicalAddress, map->size, map->mapEndianType, 0, 0, 0);
-        }
-    }
-
-    /*
-     * not found 
-     */
-    return NULL;
-}
-
-/*
- * This function maps an I/O mapped physical memory zone of the given size
- * into a virtual memory zone accessible by the caller and returns a cookie - 
- * the start address of the virtual memory zone. 
- * IX_OSAL_MMAP_PHYS_TO_VIRT should NOT therefore be used on the returned 
- * virtual address.
- * The memory zone is to be unmapped using ixOsalMemUnmap once the caller has
- * finished using this zone (e.g. on driver unload) using the cookie as 
- * parameter.
- * The IX_OSAL_READ/WRITE_LONG/SHORT macros should be used to read and write 
- * the mapped memory, adding the necessary offsets to the address cookie.
- *
- * Note: this function is not to be used directly. Use IX_OSAL_MEM_MAP 
- * instead.
- */
-PUBLIC void *
-ixOsalIoMemMap (UINT32 requestedAddress,
-    UINT32 size, IxOsalMapEndianessType requestedEndianType)
-{
-    IxOsalMemoryMap *map;
-
-    ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3,
-        IX_OSAL_LOG_DEV_STDOUT,
-        "OSAL: Mapping [addr 0x%x:size 0x%x:endianType %d]\n",
-        requestedAddress, size, requestedEndianType, 0, 0, 0);
-
-    if (requestedEndianType == IX_OSAL_LE)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalIoMemMap: Please specify component coherency mode to use MEM functions \n",
-            0, 0, 0, 0, 0, 0);
-        return (NULL);
-    }
-    map = ixOsalMemMapFind (requestedAddress,
-        size, SEARCH_PHYSICAL_ADDRESS, requestedEndianType);
-    if (map != NULL)
-    {
-        UINT32 offset = requestedAddress - map->physicalAddress;
-
-        ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3,
-            IX_OSAL_LOG_DEV_STDOUT, "OSAL: Found map [", 0, 0, 0, 0, 0, 0);
-        ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3,
-            IX_OSAL_LOG_DEV_STDOUT, map->name, 0, 0, 0, 0, 0, 0);
-        ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3,
-            IX_OSAL_LOG_DEV_STDOUT,
-            ":addr 0x%x: virt 0x%x:size 0x%x:ref %d:endianType %d]\n",
-            map->physicalAddress, map->virtualAddress,
-            map->size, map->refCount, map->mapEndianType, 0);
-
-        if (map->type == IX_OSAL_DYNAMIC_MAP && map->virtualAddress == 0)
-        {
-            if (map->mapFunction != NULL)
-            {
-                map->mapFunction (map);
-
-                if (map->virtualAddress == 0)
-                {
-                    /*
-                     * failed 
-                     */
-                    ixOsalLog (IX_OSAL_LOG_LVL_FATAL,
-                        IX_OSAL_LOG_DEV_STDERR,
-                        "OSAL: Remap failed - [addr 0x%x:size 0x%x:endianType %d]\n",
-                        requestedAddress, size, requestedEndianType, 0, 0, 0);
-                    return NULL;
-                }
-            }
-            else
-            {
-                /*
-                 * error, no map function for a dynamic map 
-                 */
-                ixOsalLog (IX_OSAL_LOG_LVL_FATAL,
-                    IX_OSAL_LOG_DEV_STDERR,
-                    "OSAL: No map function for a dynamic map - "
-                    "[addr 0x%x:size 0x%x:endianType %d]\n",
-                    requestedAddress, size, requestedEndianType, 0, 0, 0);
-
-                return NULL;
-            }
-        }
-
-        /*
-         * increment reference count 
-         */
-        map->refCount++;
-
-        return (void *) (map->virtualAddress + offset);
-    }
-
-    /*
-     * requested address is not described in the global memory map 
-     */
-    ixOsalLog (IX_OSAL_LOG_LVL_FATAL,
-        IX_OSAL_LOG_DEV_STDERR,
-        "OSAL: No mapping found - [addr 0x%x:size 0x%x:endianType %d]\n",
-        requestedAddress, size, requestedEndianType, 0, 0, 0);
-    return NULL;
-}
-
-/*
- * This function unmaps a previously mapped I/O memory zone using
- * the cookie obtained in the mapping operation. The memory zone in question
- * becomes unavailable to the caller once unmapped and the cookie should be
- * discarded.
- *
- * This function cannot fail if the given parameter is correct and does not
- * return a value.
- *
- * Note: this function is not to be used directly. Use IX_OSAL_MEM_UNMAP
- * instead.
- */
-PUBLIC void
-ixOsalIoMemUnmap (UINT32 requestedAddress, UINT32 endianType)
-{
-    IxOsalMemoryMap *map;
-
-    if (endianType == IX_OSAL_LE)
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_ERROR,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalIoMemUnmap: Please specify component coherency mode to use MEM functions \n",
-            0, 0, 0, 0, 0, 0);
-        return;
-    }
-
-    if (requestedAddress == 0)
-    {
-        /*
-         * invalid virtual address 
-         */
-        return;
-    }
-
-    map =
-        ixOsalMemMapFind (requestedAddress, 0, SEARCH_VIRTUAL_ADDRESS,
-        endianType);
-
-    if (map != NULL)
-    {
-        if (map->refCount > 0)
-        {
-            /*
-             * decrement reference count 
-             */
-            map->refCount--;
-
-            if (map->refCount == 0)
-            {
-                /*
-                 * no longer used, deallocate 
-                 */
-                if (map->type == IX_OSAL_DYNAMIC_MAP
-                    && map->unmapFunction != NULL)
-                {
-                    map->unmapFunction (map);
-                }
-            }
-        }
-    }
-    else
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_WARNING,
-            IX_OSAL_LOG_DEV_STDERR,
-            "OSAL: ixOsServMemUnmap didn't find the requested map "
-            "[virt addr 0x%x: endianType %d], ignoring call\n",
-            requestedAddress, endianType, 0, 0, 0, 0);
-    }
-}
-
-/* 
- * This function Converts a virtual address into a physical 
- * address, including the dynamically mapped memory.
- * 
- * Parameters	virtAddr - virtual address to convert
- * Return value: corresponding physical address, or NULL 
- *               if there is no physical address addressable 
- *               by the given virtual address
- * OS:	VxWorks, Linux, WinCE, QNX, eCos
- * Reentrant: Yes
- * IRQ safe: Yes
- */
-PUBLIC UINT32
-ixOsalIoMemVirtToPhys (UINT32 virtualAddress, UINT32 requestedCoherency)
-{
-    IxOsalMemoryMap *map =
-        ixOsalMemMapFind (virtualAddress, 0, SEARCH_VIRTUAL_ADDRESS,
-        requestedCoherency);
-
-    if (map != NULL)
-    {
-        return map->physicalAddress + virtualAddress - map->virtualAddress;
-    }
-    else
-    {
-        return (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS (virtualAddress);
-    }
-}
-
-/* 
- * This function Converts a virtual address into a physical 
- * address, including the dynamically mapped memory.
- * 
- * Parameters	virtAddr - virtual address to convert
- * Return value: corresponding physical address, or NULL 
- *               if there is no physical address addressable 
- *               by the given virtual address
- * OS:	VxWorks, Linux, WinCE, QNX, eCos
- * Reentrant: Yes
- * IRQ safe: Yes
- */
-PUBLIC UINT32
-ixOsalIoMemPhysToVirt (UINT32 physicalAddress, UINT32 requestedCoherency)
-{
-    IxOsalMemoryMap *map =
-        ixOsalMemMapFind (physicalAddress, 0, SEARCH_PHYSICAL_ADDRESS,
-        requestedCoherency);
-
-    if (map != NULL)
-    {
-        return map->virtualAddress + physicalAddress - map->physicalAddress;
-    }
-    else
-    {
-        return (UINT32) IX_OSAL_MMU_PHYS_TO_VIRT (physicalAddress);
-    }
-}
diff --git a/drivers/net/npe/IxOsalOsCacheMMU.c b/drivers/net/npe/IxOsalOsCacheMMU.c
deleted file mode 100644
index 72d22e5..0000000
--- a/drivers/net/npe/IxOsalOsCacheMMU.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/**
- * @file IxOsalOsCacheMMU.c (linux)
- *
- * @brief Cache MemAlloc and MemFree.
- *
- *
- * @par
- * IXP400 SW Release version 1.5
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxOsal.h"
-
-#include <malloc.h>
-
-/*
- * Allocate on a cache line boundary (null pointers are
- * not affected by this operation). This operation is NOT cache safe.
- */
-void *
-ixOsalCacheDmaMalloc (UINT32 n)
-{
-	return malloc(n);
-}
-
-/*
- *
- */
-void
-ixOsalCacheDmaFree (void *ptr)
-{
-	free(ptr);
-}
diff --git a/drivers/net/npe/IxOsalOsMsgQ.c b/drivers/net/npe/IxOsalOsMsgQ.c
deleted file mode 100644
index 5fe368b..0000000
--- a/drivers/net/npe/IxOsalOsMsgQ.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/**
- * @file IxOsalOsMsgQ.c (eCos)
- *
- * @brief OS-specific Message Queue implementation.
- *
- *
- * @par
- * IXP400 SW Release version 1.5
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxOsal.h"
-
-/*******************************
- * Public functions
- *******************************/
-PUBLIC IX_STATUS
-ixOsalMessageQueueCreate (IxOsalMessageQueue * queue,
-    UINT32 msgCount, UINT32 msgLen)
-{
-    diag_printf("%s called\n", __FUNCTION__);
-    return IX_FAIL;
-}
-
-PUBLIC IX_STATUS
-ixOsalMessageQueueDelete (IxOsalMessageQueue * queue)
-{
-    diag_printf("%s called\n", __FUNCTION__);
-    return IX_FAIL;
-}
-
-PUBLIC IX_STATUS
-ixOsalMessageQueueSend (IxOsalMessageQueue * queue, UINT8 * message)
-{
-    diag_printf("%s called\n", __FUNCTION__);
-    return IX_FAIL;
-}
-
-PUBLIC IX_STATUS
-ixOsalMessageQueueReceive (IxOsalMessageQueue * queue, UINT8 * message)
-{
-    diag_printf("%s called\n", __FUNCTION__);
-    return IX_FAIL;
-}
-
diff --git a/drivers/net/npe/IxOsalOsSemaphore.c b/drivers/net/npe/IxOsalOsSemaphore.c
deleted file mode 100644
index 33de7f6..0000000
--- a/drivers/net/npe/IxOsalOsSemaphore.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/**
- * @file IxOsalOsSemaphore.c (eCos)
- *
- * @brief Implementation for semaphore and mutex.
- *
- *
- * @par
- * IXP400 SW Release version 1.5
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxOsal.h"
-#include "IxNpeMhReceive_p.h"
-
-/* Define a large number */
-#define IX_OSAL_MAX_LONG (0x7FFFFFFF)
-
-/* Max timeout in MS, used to guard against possible overflow */
-#define IX_OSAL_MAX_TIMEOUT_MS (IX_OSAL_MAX_LONG/HZ)
-
-
-PUBLIC IX_STATUS
-ixOsalSemaphoreInit (IxOsalSemaphore * sid, UINT32 start_value)
-{
-    diag_printf("%s called\n", __FUNCTION__);
-    return IX_SUCCESS;
-}
-
-/**
- * DESCRIPTION: If the semaphore is 'empty', the calling thread is blocked.
- *              If the semaphore is 'full', it is taken and control is returned
- *              to the caller. If the time indicated in 'timeout' is reached,
- *              the thread will unblock and return an error indication. If the
- *              timeout is set to 'IX_OSAL_WAIT_NONE', the thread will never block;
- *              if it is set to 'IX_OSAL_WAIT_FOREVER', the thread will block until
- *              the semaphore is available.
- *
- *
- */
-
-
-PUBLIC IX_STATUS
-ixOsalSemaphoreWait (IxOsalOsSemaphore * sid, INT32 timeout)
-{
-    diag_printf("%s called\n", __FUNCTION__);
-    return IX_SUCCESS;
-}
-
-/*
- * Attempt to get semaphore, return immediately,
- * no error info because users expect some failures
- * when using this API.
- */
-PUBLIC IX_STATUS
-ixOsalSemaphoreTryWait (IxOsalSemaphore * sid)
-{
-    diag_printf("%s called\n", __FUNCTION__);
-    return IX_FAIL;
-}
-
-/**
- *
- * DESCRIPTION: This function causes the next available thread in the pend queue
- *              to be unblocked. If no thread is pending on this semaphore, the
- *              semaphore becomes 'full'.
- */
-PUBLIC IX_STATUS
-ixOsalSemaphorePost (IxOsalSemaphore * sid)
-{
-    diag_printf("%s called\n", __FUNCTION__);
-    return IX_SUCCESS;
-}
-
-PUBLIC IX_STATUS
-ixOsalSemaphoreGetValue (IxOsalSemaphore * sid, UINT32 * value)
-{
-    diag_printf("%s called\n", __FUNCTION__);
-    return IX_FAIL;
-}
-
-PUBLIC IX_STATUS
-ixOsalSemaphoreDestroy (IxOsalSemaphore * sid)
-{
-    diag_printf("%s called\n", __FUNCTION__);
-    return IX_FAIL;
-}
-
-/****************************
- *    Mutex
- ****************************/
-
-static void drv_mutex_init(IxOsalMutex *mutex)
-{
-	*mutex = 0;
-}
-
-static void drv_mutex_destroy(IxOsalMutex *mutex)
-{
-	*mutex = -1;
-}
-
-static int drv_mutex_trylock(IxOsalMutex *mutex)
-{
-	int result = true;
-
-	if (*mutex == 1)
-		result = false;
-
-	return result;
-}
-
-static void drv_mutex_unlock(IxOsalMutex *mutex)
-{
-	if (*mutex == 1)
-		printf("Trying to unlock unlocked mutex!");
-
-	*mutex = 0;
-}
-
-PUBLIC IX_STATUS
-ixOsalMutexInit (IxOsalMutex * mutex)
-{
-    drv_mutex_init(mutex);
-    return IX_SUCCESS;
-}
-
-PUBLIC IX_STATUS
-ixOsalMutexLock (IxOsalMutex * mutex, INT32 timeout)
-{
-    int tries;
-
-    if (timeout == IX_OSAL_WAIT_NONE) {
-	if (drv_mutex_trylock(mutex))
-	    return IX_SUCCESS;
-	else
-	    return IX_FAIL;
-    }
-
-    tries = (timeout * 1000) / 50;
-    while (1) {
-	if (drv_mutex_trylock(mutex))
-	    return IX_SUCCESS;
-	if (timeout != IX_OSAL_WAIT_FOREVER && tries-- <= 0)
-	    break;
-	udelay(50);
-    }
-    return IX_FAIL;
-}
-
-PUBLIC IX_STATUS
-ixOsalMutexUnlock (IxOsalMutex * mutex)
-{
-    drv_mutex_unlock(mutex);
-    return IX_SUCCESS;
-}
-
-/*
- * Attempt to get mutex, return immediately,
- * no error info because users expect some failures
- * when using this API.
- */
-PUBLIC IX_STATUS
-ixOsalMutexTryLock (IxOsalMutex * mutex)
-{
-    if (drv_mutex_trylock(mutex))
-	return IX_SUCCESS;
-    return IX_FAIL;
-}
-
-PUBLIC IX_STATUS
-ixOsalMutexDestroy (IxOsalMutex * mutex)
-{
-    drv_mutex_destroy(mutex);
-    return IX_SUCCESS;
-}
-
-PUBLIC IX_STATUS
-ixOsalFastMutexInit (IxOsalFastMutex * mutex)
-{
-    return ixOsalMutexInit(mutex);
-}
-
-PUBLIC IX_STATUS ixOsalFastMutexTryLock(IxOsalFastMutex *mutex)
-{
-    return ixOsalMutexTryLock(mutex);
-}
-
-
-PUBLIC IX_STATUS
-ixOsalFastMutexUnlock (IxOsalFastMutex * mutex)
-{
-    return ixOsalMutexUnlock(mutex);
-}
-
-PUBLIC IX_STATUS
-ixOsalFastMutexDestroy (IxOsalFastMutex * mutex)
-{
-    return ixOsalMutexDestroy(mutex);
-}
diff --git a/drivers/net/npe/IxOsalOsServices.c b/drivers/net/npe/IxOsalOsServices.c
deleted file mode 100644
index a9aa368..0000000
--- a/drivers/net/npe/IxOsalOsServices.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/**
- * @file IxOsalOsServices.c (linux)
- *
- * @brief Implementation for Irq, Mem, sleep.
- *
- *
- * @par
- * IXP400 SW Release version 1.5
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include <config.h>
-#include <common.h>
-#include "IxOsal.h"
-#include <IxEthAcc.h>
-#include <IxEthDB.h>
-#include <IxNpeDl.h>
-#include <IxQMgr.h>
-#include <IxNpeMh.h>
-
-static char *traceHeaders[] = {
-    "",
-    "[fatal] ",
-    "[error] ",
-    "[warning] ",
-    "[message] ",
-    "[debug1] ",
-    "[debug2] ",
-    "[debug3] ",
-    "[all]"
-};
-
-/* by default trace all but debug message */
-PRIVATE int ixOsalCurrLogLevel = IX_OSAL_LOG_LVL_MESSAGE;
-
-/**************************************
- * Irq services
- *************************************/
-
-PUBLIC IX_STATUS
-ixOsalIrqBind (UINT32 vector, IxOsalVoidFnVoidPtr routine, void *parameter)
-{
-    return IX_FAIL;
-}
-
-PUBLIC IX_STATUS
-ixOsalIrqUnbind (UINT32 vector)
-{
-    return IX_FAIL;
-}
-
-PUBLIC UINT32
-ixOsalIrqLock ()
-{
-    return 0;
-}
-
-/* Enable interrupts and task scheduling,
- * input parameter: irqEnable status returned
- * by ixOsalIrqLock().
- */
-PUBLIC void
-ixOsalIrqUnlock (UINT32 lockKey)
-{
-}
-
-PUBLIC UINT32
-ixOsalIrqLevelSet (UINT32 level)
-{
-    return IX_FAIL;
-}
-
-PUBLIC void
-ixOsalIrqEnable (UINT32 irqLevel)
-{
-}
-
-PUBLIC void
-ixOsalIrqDisable (UINT32 irqLevel)
-{
-}
-
-/*********************
- * Log function
- *********************/
-
-INT32
-ixOsalLog (IxOsalLogLevel level,
-    IxOsalLogDevice device,
-    char *format, int arg1, int arg2, int arg3, int arg4, int arg5, int arg6)
-{
-    /*
-     * Return -1 for custom display devices
-     */
-    if ((device != IX_OSAL_LOG_DEV_STDOUT)
-        && (device != IX_OSAL_LOG_DEV_STDERR))
-    {
-        debug("ixOsalLog: only IX_OSAL_LOG_DEV_STDOUT and IX_OSAL_LOG_DEV_STDERR are supported \n");
-        return (IX_OSAL_LOG_ERROR);
-    }
-
-    if (level <= ixOsalCurrLogLevel && level != IX_OSAL_LOG_LVL_NONE)
-    {
-#if 0 /* sr: U-Boots printf or debug doesn't return a length */
-        int headerByteCount = (level == IX_OSAL_LOG_LVL_USER) ? 0 : diag_printf(traceHeaders[level - 1]);
-
-        return headerByteCount + diag_printf (format, arg1, arg2, arg3, arg4, arg5, arg6);
-#else
-        int headerByteCount = (level == IX_OSAL_LOG_LVL_USER) ? 0 : strlen(traceHeaders[level - 1]);
-
-        return headerByteCount + strlen(format);
-#endif
-    }
-    else
-    {
-        /*
-         * Return error
-         */
-        return (IX_OSAL_LOG_ERROR);
-    }
-}
-
-PUBLIC UINT32
-ixOsalLogLevelSet (UINT32 level)
-{
-    UINT32 oldLevel;
-
-    /*
-     * Check value first
-     */
-    if ((level < IX_OSAL_LOG_LVL_NONE) || (level > IX_OSAL_LOG_LVL_ALL))
-    {
-        ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE,
-            IX_OSAL_LOG_DEV_STDOUT,
-            "ixOsalLogLevelSet: Log Level is between %d and%d \n",
-            IX_OSAL_LOG_LVL_NONE, IX_OSAL_LOG_LVL_ALL, 0, 0, 0, 0);
-        return IX_OSAL_LOG_LVL_NONE;
-    }
-    oldLevel = ixOsalCurrLogLevel;
-
-    ixOsalCurrLogLevel = level;
-
-    return oldLevel;
-}
-
-/**************************************
- * Task services
- *************************************/
-
-PUBLIC void
-ixOsalBusySleep (UINT32 microseconds)
-{
-	udelay(microseconds);
-}
-
-PUBLIC void
-ixOsalSleep (UINT32 milliseconds)
-{
-    if (milliseconds != 0) {
-#if 1
-	/*
-	 * sr: We poll while we wait because interrupts are off in U-Boot
-	 * and CSR expects messages, etc to be dispatched while sleeping.
-	 */
-	int i;
-	IxQMgrDispatcherFuncPtr qDispatcherFunc;
-
-	ixQMgrDispatcherLoopGet(&qDispatcherFunc);
-
-	while (milliseconds--) {
-		for (i = 1; i <= 2; i++)
-			ixNpeMhMessagesReceive(i);
-		(*qDispatcherFunc)(IX_QMGR_QUELOW_GROUP);
-
-		udelay(1000);
-	}
-#endif
-    }
-}
-
-/**************************************
- * Memory functions
- *************************************/
-
-void *
-ixOsalMemAlloc (UINT32 size)
-{
-    return (void *)0;
-}
-
-void
-ixOsalMemFree (void *ptr)
-{
-}
-
-/*
- * Copy count bytes from src to dest ,
- * returns pointer to the dest mem zone.
- */
-void *
-ixOsalMemCopy (void *dest, void *src, UINT32 count)
-{
-    IX_OSAL_ASSERT (dest != NULL);
-    IX_OSAL_ASSERT (src != NULL);
-    return (memcpy (dest, src, count));
-}
-
-/*
- * Fills a memory zone with a given constant byte,
- * returns pointer to the memory zone.
- */
-void *
-ixOsalMemSet (void *ptr, UINT8 filler, UINT32 count)
-{
-    IX_OSAL_ASSERT (ptr != NULL);
-    return (memset (ptr, filler, count));
-}
diff --git a/drivers/net/npe/IxOsalOsThread.c b/drivers/net/npe/IxOsalOsThread.c
deleted file mode 100644
index b3caae1..0000000
--- a/drivers/net/npe/IxOsalOsThread.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/**
- * @file IxOsalOsThread.c (eCos)
- *
- * @brief OS-specific thread implementation.
- *
- *
- * @par
- * IXP400 SW Release version 1.5
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxOsal.h"
-
-/* Thread attribute is ignored */
-PUBLIC IX_STATUS
-ixOsalThreadCreate (IxOsalThread * ptrTid,
-    IxOsalThreadAttr * threadAttr, IxOsalVoidFnVoidPtr entryPoint, void *arg)
-{
-    return IX_SUCCESS;
-}
-
-/*
- * Start thread after given its thread handle
- */
-PUBLIC IX_STATUS
-ixOsalThreadStart (IxOsalThread * tId)
-{
-    /* Thread already started upon creation */
-    return IX_SUCCESS;
-}
-
-/*
- * In Linux threadKill does not actually destroy the thread,
- * it will stop the signal handling.
- */
-PUBLIC IX_STATUS
-ixOsalThreadKill (IxOsalThread * tid)
-{
-    return IX_SUCCESS;
-}
-
-PUBLIC void
-ixOsalThreadExit (void)
-{
-}
-
-PUBLIC IX_STATUS
-ixOsalThreadPrioritySet (IxOsalOsThread * tid, UINT32 priority)
-{
-    return IX_SUCCESS;
-}
-
-PUBLIC IX_STATUS
-ixOsalThreadSuspend (IxOsalThread * tId)
-{
-    return IX_SUCCESS;
-
-}
-
-PUBLIC IX_STATUS
-ixOsalThreadResume (IxOsalThread * tId)
-{
-    return IX_SUCCESS;
-}
diff --git a/drivers/net/npe/IxQMgrAqmIf.c b/drivers/net/npe/IxQMgrAqmIf.c
deleted file mode 100644
index 69138cc..0000000
--- a/drivers/net/npe/IxQMgrAqmIf.c
+++ /dev/null
@@ -1,939 +0,0 @@
-/* 
- * @file:    IxQMgrAqmIf.c
- *
- * @author Intel Corporation
- * @date     30-Oct-2001
- *
- * @brief    This component provides a set of functions for
- * perfoming I/O on the AQM hardware.
- * 
- * Design Notes: 
- *              These functions are intended to be as fast as possible
- * and as a result perform NO PARAMETER CHECKING.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * Inlines are compiled as function when this is defined.
- * N.B. Must be placed before #include of "IxQMgrAqmIf_p.h
- */
-#ifndef IXQMGRAQMIF_P_H
-#    define IXQMGRAQMIF_C
-#else
-#    error
-#endif
-
-/*
- * User defined include files.
- */
-#include "IxOsal.h"
-#include "IxQMgr.h"
-#include "IxQMgrAqmIf_p.h"
-#include "IxQMgrLog_p.h"
-
-
-/*
- * #defines and macros used in this file.
- */
-
-/* These defines are the bit offsets of the various fields of
- * the queue configuration register
- */
-#define IX_QMGR_Q_CONFIG_WRPTR_OFFSET       0x00
-#define IX_QMGR_Q_CONFIG_RDPTR_OFFSET       0x07
-#define IX_QMGR_Q_CONFIG_BADDR_OFFSET       0x0E
-#define IX_QMGR_Q_CONFIG_ESIZE_OFFSET       0x16
-#define IX_QMGR_Q_CONFIG_BSIZE_OFFSET       0x18
-#define IX_QMGR_Q_CONFIG_NE_OFFSET          0x1A
-#define IX_QMGR_Q_CONFIG_NF_OFFSET          0x1D
-
-#define IX_QMGR_BASE_ADDR_16_WORD_ALIGN     0x40
-#define IX_QMGR_BASE_ADDR_16_WORD_SHIFT     0x6
-
-#define IX_QMGR_NE_NF_CLEAR_MASK            0x03FFFFFF
-#define IX_QMGR_NE_MASK                     0x7
-#define IX_QMGR_NF_MASK                     0x7
-#define IX_QMGR_SIZE_MASK                   0x3
-#define IX_QMGR_ENTRY_SIZE_MASK             0x3
-#define IX_QMGR_BADDR_MASK                  0x003FC000
-#define IX_QMGR_RDPTR_MASK                  0x7F
-#define IX_QMGR_WRPTR_MASK                  0x7F
-#define IX_QMGR_RDWRPTR_MASK                0x00003FFF
-
-#define IX_QMGR_AQM_ADDRESS_SPACE_SIZE_IN_WORDS 0x1000
-
-/* Base address of AQM SRAM */
-#define IX_QMGR_AQM_SRAM_BASE_ADDRESS_OFFSET \
-((IX_QMGR_QUECONFIG_BASE_OFFSET) + (IX_QMGR_QUECONFIG_SIZE))
-
-/* Min buffer size used for generating buffer size in QUECONFIG */
-#define IX_QMGR_MIN_BUFFER_SIZE 16
-
-/* Reset values of QMgr hardware registers */
-#define IX_QMGR_QUELOWSTAT_RESET_VALUE    0x33333333
-#define IX_QMGR_QUEUOSTAT_RESET_VALUE     0x00000000
-#define IX_QMGR_QUEUPPSTAT0_RESET_VALUE   0xFFFFFFFF
-#define IX_QMGR_QUEUPPSTAT1_RESET_VALUE   0x00000000
-#define IX_QMGR_INT0SRCSELREG_RESET_VALUE 0x00000000
-#define IX_QMGR_QUEIEREG_RESET_VALUE      0x00000000
-#define IX_QMGR_QINTREG_RESET_VALUE       0xFFFFFFFF
-#define IX_QMGR_QUECONFIG_RESET_VALUE     0x00000000
-
-#define IX_QMGR_PHYSICAL_AQM_BASE_ADDRESS IX_OSAL_IXP400_QMGR_PHYS_BASE
-
-#define IX_QMGR_QUELOWSTAT_BITS_PER_Q (BITS_PER_WORD/IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD)
-
-#define IX_QMGR_QUELOWSTAT_QID_MASK 0x7
-#define IX_QMGR_Q_CONFIG_ADDR_GET(qId)\
-        (((qId) * IX_QMGR_NUM_BYTES_PER_WORD) +\
-                  IX_QMGR_QUECONFIG_BASE_OFFSET)
-
-#define IX_QMGR_ENTRY1_OFFSET 0
-#define IX_QMGR_ENTRY2_OFFSET 1
-#define IX_QMGR_ENTRY4_OFFSET 3
-
-/*
- * Variable declarations global to this file. Externs are followed by
- * statics.
- */
-UINT32 aqmBaseAddress = 0;
-/* Store addresses and bit-masks for certain queue access and status registers.
- * This is to facilitate inlining of QRead, QWrite and QStatusGet functions
- * in IxQMgr,h
- */
-extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[];
-UINT32 * ixQMgrAqmIfQueAccRegAddr[IX_QMGR_MAX_NUM_QUEUES];
-UINT32 ixQMgrAqmIfQueLowStatRegAddr[IX_QMGR_MIN_QUEUPP_QID];
-UINT32 ixQMgrAqmIfQueLowStatBitsOffset[IX_QMGR_MIN_QUEUPP_QID];
-UINT32 ixQMgrAqmIfQueLowStatBitsMask;
-UINT32 ixQMgrAqmIfQueUppStat0RegAddr;
-UINT32 ixQMgrAqmIfQueUppStat1RegAddr;
-UINT32 ixQMgrAqmIfQueUppStat0BitMask[IX_QMGR_MIN_QUEUPP_QID];
-UINT32 ixQMgrAqmIfQueUppStat1BitMask[IX_QMGR_MIN_QUEUPP_QID];
-
-/* 
- * Fast mutexes, one for each queue, used to protect peek & poke functions
- */
-IxOsalFastMutex ixQMgrAqmIfPeekPokeFastMutex[IX_QMGR_MAX_NUM_QUEUES];
-
-/*
- * Function prototypes
- */
-PRIVATE unsigned
-watermarkToAqmWatermark (IxQMgrWMLevel watermark );
-
-PRIVATE unsigned
-entrySizeToAqmEntrySize (IxQMgrQEntrySizeInWords entrySize);
-
-PRIVATE unsigned
-bufferSizeToAqmBufferSize (unsigned bufferSizeInWords);
-
-PRIVATE void
-ixQMgrAqmIfRegistersReset (void);
-
-PRIVATE void
-ixQMgrAqmIfEntryAddressGet (unsigned int entryIndex,
-			    UINT32 configRegWord,
-			    unsigned int qEntrySizeInwords,
-			    unsigned int qSizeInWords,
-			    UINT32 **address);
-/*
- * Function definitions
- */
-void
-ixQMgrAqmIfInit (void)
-{
-    UINT32 aqmVirtualAddr;
-    int i;
-
-    /* The value of aqmBaseAddress depends on the logical address
-     * assigned by the MMU.
-     */
-    aqmVirtualAddr =
-	(UINT32) IX_OSAL_MEM_MAP(IX_QMGR_PHYSICAL_AQM_BASE_ADDRESS,
-				    IX_OSAL_IXP400_QMGR_MAP_SIZE);
-    IX_OSAL_ASSERT (aqmVirtualAddr);
-    
-    ixQMgrAqmIfBaseAddressSet (aqmVirtualAddr);
-
-    ixQMgrAqmIfRegistersReset ();
-
-    for (i = 0; i< IX_QMGR_MAX_NUM_QUEUES; i++)
-    {
-	ixOsalFastMutexInit(&ixQMgrAqmIfPeekPokeFastMutex[i]);
-
-	/********************************************************************
-	 * Register addresses and bit masks are calculated and stored here to
-	 * facilitate inlining of QRead, QWrite and QStatusGet functions in
-	 * IxQMgr.h.
-	 * These calculations are normally performed dynamically in inlined
-	 * functions in IxQMgrAqmIf_p.h, and their semantics are reused here.
-	 */
-
-	/* AQM Queue access reg addresses, per queue */
-	ixQMgrAqmIfQueAccRegAddr[i] = 
-	    (UINT32 *)(aqmBaseAddress + IX_QMGR_Q_ACCESS_ADDR_GET(i));
-	ixQMgrQInlinedReadWriteInfo[i].qAccRegAddr = 
-	    (volatile UINT32 *)(aqmBaseAddress + IX_QMGR_Q_ACCESS_ADDR_GET(i));
-
-
-	ixQMgrQInlinedReadWriteInfo[i].qConfigRegAddr = 
-	    (volatile UINT32 *)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(i));
-
-	/* AQM Queue lower-group (0-31), only */
-	if (i < IX_QMGR_MIN_QUEUPP_QID)
-	{
-	    /* AQM Q underflow/overflow status register addresses, per queue */
-	    ixQMgrQInlinedReadWriteInfo[i].qUOStatRegAddr = 
-		(volatile UINT32 *)(aqmBaseAddress +
-		IX_QMGR_QUEUOSTAT0_OFFSET +
-		((i / IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD) *
-		 IX_QMGR_NUM_BYTES_PER_WORD));
-
-	    /* AQM Q underflow status bit masks for status register per queue */
-	    ixQMgrQInlinedReadWriteInfo[i].qUflowStatBitMask = 
-		(IX_QMGR_UNDERFLOW_BIT_OFFSET + 1) <<
-		((i & (IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD - 1)) *
-		 (BITS_PER_WORD / IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD));
-
-	    /* AQM Q overflow status bit masks for status register, per queue */
-	    ixQMgrQInlinedReadWriteInfo[i].qOflowStatBitMask = 
-		(IX_QMGR_OVERFLOW_BIT_OFFSET + 1) <<
-		((i & (IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD - 1)) *
-		 (BITS_PER_WORD / IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD));
-
-	    /* AQM Q lower-group (0-31) status register addresses, per queue */
-	    ixQMgrAqmIfQueLowStatRegAddr[i] = aqmBaseAddress +
-		IX_QMGR_QUELOWSTAT0_OFFSET +
-		((i / IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD) *
-		 IX_QMGR_NUM_BYTES_PER_WORD);
-
-	    /* AQM Q lower-group (0-31) status register bit offset */
-	    ixQMgrAqmIfQueLowStatBitsOffset[i] =
-		(i & (IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD - 1)) * 
-		(BITS_PER_WORD / IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD);
-	}
-	else /* AQM Q upper-group (32-63), only */
-	{
-	    /* AQM Q upper-group (32-63) Nearly Empty status reg bit masks */
-	    ixQMgrAqmIfQueUppStat0BitMask[i - IX_QMGR_MIN_QUEUPP_QID] =
-		(1 << (i - IX_QMGR_MIN_QUEUPP_QID));
-
-	    /* AQM Q upper-group (32-63) Full status register bit masks */
-	    ixQMgrAqmIfQueUppStat1BitMask[i - IX_QMGR_MIN_QUEUPP_QID] =
-		(1 << (i - IX_QMGR_MIN_QUEUPP_QID));
-	}
-    }
-
-    /* AQM Q lower-group (0-31) status register bit mask */
-    ixQMgrAqmIfQueLowStatBitsMask = (1 <<
-				    (BITS_PER_WORD /
-				     IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD)) - 1;
-
-    /* AQM Q upper-group (32-63) Nearly Empty status register address */
-    ixQMgrAqmIfQueUppStat0RegAddr = aqmBaseAddress + IX_QMGR_QUEUPPSTAT0_OFFSET;
-    
-    /* AQM Q upper-group (32-63) Full status register address */
-    ixQMgrAqmIfQueUppStat1RegAddr = aqmBaseAddress + IX_QMGR_QUEUPPSTAT1_OFFSET;
-}
-
-/*
- * Uninitialise the AqmIf module by unmapping memory, etc
- */
-void
-ixQMgrAqmIfUninit (void)
-{
-    UINT32 virtAddr;
-
-    ixQMgrAqmIfBaseAddressGet (&virtAddr);
-    IX_OSAL_MEM_UNMAP (virtAddr);
-    ixQMgrAqmIfBaseAddressSet (0);
-}
-
-/*
- * Set the the logical base address of AQM
- */
-void
-ixQMgrAqmIfBaseAddressSet (UINT32 address)
-{
-    aqmBaseAddress = address;
-}
-
-/*
- * Get the logical base address of AQM
- */
-void
-ixQMgrAqmIfBaseAddressGet (UINT32 *address)
-{
-    *address = aqmBaseAddress;
-}
-
-/*
- * Get the logical base address of AQM SRAM
- */
-void
-ixQMgrAqmIfSramBaseAddressGet (UINT32 *address)
-{
-    *address = aqmBaseAddress                +
-	IX_QMGR_AQM_SRAM_BASE_ADDRESS_OFFSET;
-}
-
-/*
- * This function will write the status bits of a queue
- * specified by qId.
- */
-void
-ixQMgrAqmIfQRegisterBitsWrite (IxQMgrQId qId, 
-			       UINT32 registerBaseAddrOffset,
-			       unsigned queuesPerRegWord,
-			       UINT32 value)
-{
-    volatile UINT32 *registerAddress;
-    UINT32 registerWord;
-    UINT32 statusBitsMask;
-    UINT32 bitsPerQueue;
-
-    bitsPerQueue = BITS_PER_WORD / queuesPerRegWord;
-
-    /*
-     * Calculate the registerAddress
-     * multiple queues split accross registers
-     */
-    registerAddress = (UINT32*)(aqmBaseAddress +
-				registerBaseAddrOffset +
-				((qId / queuesPerRegWord) *
-				 IX_QMGR_NUM_BYTES_PER_WORD));    
-
-    /* Read the current data */
-    ixQMgrAqmIfWordRead (registerAddress, &registerWord);
-
-
-    if( (registerBaseAddrOffset == IX_QMGR_INT0SRCSELREG0_OFFSET) &&
-        (qId == IX_QMGR_QUEUE_0) )
-    {
-      statusBitsMask = 0x7 ;   
-
-      /* Queue 0 at INT0SRCSELREG should not corrupt the value bit-3  */
-      value &=  0x7 ;        
-    }
-    else
-    {     
-      /* Calculate the mask for the status bits for this queue. */
-      statusBitsMask = ((1 << bitsPerQueue) - 1);
-      statusBitsMask <<= ((qId & (queuesPerRegWord - 1)) * bitsPerQueue);
-
-      /* Mask out bits in value that would overwrite other q data */
-      value <<= ((qId & (queuesPerRegWord - 1)) * bitsPerQueue);
-      value &= statusBitsMask;
-    }
-
-    /* Mask out bits to write to */
-    registerWord &= ~statusBitsMask;
-    
-
-    /* Set the write bits */
-    registerWord |= value;
-
-    /*
-     * Write the data
-     */
-    ixQMgrAqmIfWordWrite (registerAddress, registerWord);
-}
-
-/*
- * This function generates the parameters that can be used to
- * check if a Qs status matches the specified source select.
- * It calculates which status word to check (statusWordOffset),
- * the value to check the status against (checkValue) and the
- * mask (mask) to mask out all but the bits to check in the status word.
- */
-void
-ixQMgrAqmIfQStatusCheckValsCalc (IxQMgrQId qId,
-				 IxQMgrSourceId srcSel,
-				 unsigned int *statusWordOffset,
-				 UINT32 *checkValue,
-				 UINT32 *mask)
-{
-    UINT32 shiftVal;
-   
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-	switch (srcSel)
-	{
-	    case IX_QMGR_Q_SOURCE_ID_E:
-		*checkValue = IX_QMGR_Q_STATUS_E_BIT_MASK;
-		*mask = IX_QMGR_Q_STATUS_E_BIT_MASK;
-		break;
-	    case IX_QMGR_Q_SOURCE_ID_NE:
-		*checkValue = IX_QMGR_Q_STATUS_NE_BIT_MASK;
-		*mask = IX_QMGR_Q_STATUS_NE_BIT_MASK;
-		break;
-	    case IX_QMGR_Q_SOURCE_ID_NF:
-		*checkValue = IX_QMGR_Q_STATUS_NF_BIT_MASK;
-		*mask = IX_QMGR_Q_STATUS_NF_BIT_MASK;
-		break;
-	    case IX_QMGR_Q_SOURCE_ID_F:
-		*checkValue = IX_QMGR_Q_STATUS_F_BIT_MASK;
-		*mask = IX_QMGR_Q_STATUS_F_BIT_MASK;
-		break;
-	    case IX_QMGR_Q_SOURCE_ID_NOT_E:
-		*checkValue = 0;
-		*mask = IX_QMGR_Q_STATUS_E_BIT_MASK;
-		break;
-	    case IX_QMGR_Q_SOURCE_ID_NOT_NE:
-		*checkValue = 0;
-		*mask = IX_QMGR_Q_STATUS_NE_BIT_MASK;
-		break;
-	    case IX_QMGR_Q_SOURCE_ID_NOT_NF:
-		*checkValue = 0;
-		*mask = IX_QMGR_Q_STATUS_NF_BIT_MASK;
-		break;
-	    case IX_QMGR_Q_SOURCE_ID_NOT_F:
-		*checkValue = 0;
-		*mask = IX_QMGR_Q_STATUS_F_BIT_MASK;
-		break;
-	    default:
-		/* Should never hit */
-		IX_OSAL_ASSERT(0);
-		break;
-	}
-
-	/* One nibble of status per queue so need to shift the
-	 * check value and mask out to the correct position.
-	 */
-	shiftVal = (qId % IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD) * 
-	    IX_QMGR_QUELOWSTAT_BITS_PER_Q;
-
-	/* Calculate the which status word to check from the qId,
-	 * 8 Qs status per word
-	 */
-	*statusWordOffset = qId / IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD;
-
-	*checkValue <<= shiftVal;
-	*mask <<= shiftVal;
-    }
-    else
-    {
-	/* One status word */
-	*statusWordOffset = 0;
-	/* Single bits per queue and int source bit hardwired  NE,
-	 * Qs start at 32.
-	 */
-	*mask = 1 << (qId - IX_QMGR_MIN_QUEUPP_QID);
-	*checkValue = *mask;
-    }
-}
-
-void
-ixQMgrAqmIfQInterruptEnable (IxQMgrQId qId)
-{
-    volatile UINT32 *registerAddress;
-    UINT32 registerWord;
-    UINT32 actualBitOffset;
-    
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {    
-	registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG0_OFFSET);
-    }
-    else
-    {
-	registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG1_OFFSET);
-    }
-
-    actualBitOffset = 1 << (qId % IX_QMGR_MIN_QUEUPP_QID);
-
-    ixQMgrAqmIfWordRead (registerAddress, &registerWord);
-    ixQMgrAqmIfWordWrite (registerAddress, (registerWord | actualBitOffset));
-}
-
-void
-ixQMgrAqmIfQInterruptDisable (IxQMgrQId qId)
-{
-    volatile UINT32 *registerAddress;
-    UINT32 registerWord;
-    UINT32 actualBitOffset;
-
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {    
-	registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG0_OFFSET);
-    }
-    else
-    {
-	registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG1_OFFSET);
-    }
-
-    actualBitOffset = 1 << (qId % IX_QMGR_MIN_QUEUPP_QID);
-
-    ixQMgrAqmIfWordRead (registerAddress, &registerWord);
-    ixQMgrAqmIfWordWrite (registerAddress, registerWord & (~actualBitOffset));
-}
-
-void
-ixQMgrAqmIfQueCfgWrite (IxQMgrQId qId,
-		       IxQMgrQSizeInWords qSizeInWords,
-		       IxQMgrQEntrySizeInWords entrySizeInWords,
-		       UINT32 freeSRAMAddress)
-{
-    volatile UINT32 *cfgAddress = NULL;
-    UINT32 qCfg = 0;
-    UINT32 baseAddress = 0;
-    unsigned aqmEntrySize = 0;
-    unsigned aqmBufferSize = 0;
-
-    /* Build config register */
-    aqmEntrySize = entrySizeToAqmEntrySize (entrySizeInWords);
-    qCfg |= (aqmEntrySize&IX_QMGR_ENTRY_SIZE_MASK) <<
-	IX_QMGR_Q_CONFIG_ESIZE_OFFSET;
-
-    aqmBufferSize = bufferSizeToAqmBufferSize (qSizeInWords);
-    qCfg |= (aqmBufferSize&IX_QMGR_SIZE_MASK) << IX_QMGR_Q_CONFIG_BSIZE_OFFSET;
-
-    /* baseAddress, calculated relative to aqmBaseAddress and start address  */
-    baseAddress = freeSRAMAddress -
-	(aqmBaseAddress + IX_QMGR_QUECONFIG_BASE_OFFSET);
-		   
-    /* Verify base address aligned to a 16 word boundary */
-    if ((baseAddress % IX_QMGR_BASE_ADDR_16_WORD_ALIGN) != 0)
-    {
-	IX_QMGR_LOG_ERROR0("ixQMgrAqmIfQueCfgWrite () address is not on 16 word boundary\n");
-    }
-    /* Now convert it to a 16 word pointer as required by QUECONFIG register */
-    baseAddress >>= IX_QMGR_BASE_ADDR_16_WORD_SHIFT;
-    
-    
-    qCfg |= (baseAddress << IX_QMGR_Q_CONFIG_BADDR_OFFSET);
-
-
-    cfgAddress = (UINT32*)(aqmBaseAddress +
-			IX_QMGR_Q_CONFIG_ADDR_GET(qId));
-
-
-    /* NOTE: High and Low watermarks are set to zero */
-    ixQMgrAqmIfWordWrite (cfgAddress, qCfg);
-}
-
-void
-ixQMgrAqmIfQueCfgRead (IxQMgrQId qId,
-		       unsigned int numEntries,
-		       UINT32 *baseAddress,
-		       unsigned int *ne,
-		       unsigned int *nf,
-		       UINT32 *readPtr,
-		       UINT32 *writePtr)
-{
-    UINT32 qcfg;
-    UINT32 *cfgAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(qId));
-    unsigned int qEntrySizeInwords;
-    unsigned int qSizeInWords;
-    UINT32 *readPtr_ = NULL;
-	
-    /* Read the queue configuration register */
-    ixQMgrAqmIfWordRead (cfgAddress, &qcfg);
-    
-    /* Extract the base address */
-    *baseAddress = (UINT32)((qcfg & IX_QMGR_BADDR_MASK) >>
-			    (IX_QMGR_Q_CONFIG_BADDR_OFFSET));
-
-    /* Base address is a 16 word pointer from the start of AQM SRAM.
-     * Convert to absolute word address.
-     */
-    *baseAddress <<= IX_QMGR_BASE_ADDR_16_WORD_SHIFT;
-    *baseAddress += (UINT32)IX_QMGR_QUECONFIG_BASE_OFFSET;
-
-    /*
-     * Extract the watermarks. 0->0 entries, 1->1 entries, 2->2 entries, 3->4 entries......
-     * If ne > 0 ==> neInEntries = 2^(ne - 1)
-     * If ne == 0 ==> neInEntries = 0
-     * The same applies.
-     */
-    *ne = ((qcfg) >> (IX_QMGR_Q_CONFIG_NE_OFFSET)) & IX_QMGR_NE_MASK;
-    *nf = ((qcfg) >> (IX_QMGR_Q_CONFIG_NF_OFFSET)) & IX_QMGR_NF_MASK;
-
-    if (0 != *ne)
-    {
-	*ne = 1 << (*ne - 1);	
-    }
-    if (0 != *nf)
-    {
-	*nf = 1 << (*nf - 1);
-    }
-
-    /* Get the queue entry size in words */
-    qEntrySizeInwords = ixQMgrQEntrySizeInWordsGet (qId);
-
-    /* Get the queue size in words */
-    qSizeInWords = ixQMgrQSizeInWordsGet (qId);
-
-    ixQMgrAqmIfEntryAddressGet (0/* Entry 0. i.e the readPtr*/,
-				qcfg,
-				qEntrySizeInwords,
-				qSizeInWords,
-				&readPtr_);
-    *readPtr = (UINT32)readPtr_;
-    *readPtr -= (UINT32)aqmBaseAddress;/* Offset, not absolute address */
-
-    *writePtr = (qcfg >> IX_QMGR_Q_CONFIG_WRPTR_OFFSET) & IX_QMGR_WRPTR_MASK;
-    *writePtr = *baseAddress + (*writePtr * (IX_QMGR_NUM_BYTES_PER_WORD));
-    return;
-}
-
-unsigned
-ixQMgrAqmIfLog2 (unsigned number)
-{
-    unsigned count = 0;
-
-    /*
-     * N.B. this function will return 0
-     * for ixQMgrAqmIfLog2 (0)
-     */
-    while (number/2)
-    {
-	number /=2;
-	count++;	
-    }
-
-    return count;
-}
-
-void ixQMgrAqmIfIntSrcSelReg0Bit3Set (void)
-{
-
-    volatile UINT32 *registerAddress;
-    UINT32 registerWord; 
-
-    /*
-     * Calculate the registerAddress
-     * multiple queues split accross registers
-     */
-    registerAddress = (UINT32*)(aqmBaseAddress +
-				IX_QMGR_INT0SRCSELREG0_OFFSET);    
-
-    /* Read the current data */
-    ixQMgrAqmIfWordRead (registerAddress, &registerWord);
-
-    /* Set the write bits */
-    registerWord |= (1<<IX_QMGR_INT0SRCSELREG0_BIT3) ;
-
-    /*
-     * Write the data
-     */
-    ixQMgrAqmIfWordWrite (registerAddress, registerWord);
-}  
-
-
-void
-ixQMgrAqmIfIntSrcSelWrite (IxQMgrQId qId,
-			  IxQMgrSourceId sourceId)
-{
-    ixQMgrAqmIfQRegisterBitsWrite (qId,
-				   IX_QMGR_INT0SRCSELREG0_OFFSET,
-				   IX_QMGR_INTSRC_NUM_QUE_PER_WORD,
-				   sourceId);
-}
-
-
-
-void
-ixQMgrAqmIfWatermarkSet (IxQMgrQId qId,
-			unsigned ne,
-			unsigned nf)
-{
-    volatile UINT32 *address = 0;
-    UINT32 value = 0;
-    unsigned aqmNeWatermark = 0;
-    unsigned aqmNfWatermark = 0;
-
-    address = (UINT32*)(aqmBaseAddress +
-		     IX_QMGR_Q_CONFIG_ADDR_GET(qId));
-
-    aqmNeWatermark = watermarkToAqmWatermark (ne);
-    aqmNfWatermark = watermarkToAqmWatermark (nf);
-
-    /* Read the current watermarks */
-    ixQMgrAqmIfWordRead (address, &value);
-
-    /* Clear out the old watermarks */
-    value &=  IX_QMGR_NE_NF_CLEAR_MASK;
-    
-    /* Generate the value to write */
-    value |= (aqmNeWatermark << IX_QMGR_Q_CONFIG_NE_OFFSET) |
-	(aqmNfWatermark << IX_QMGR_Q_CONFIG_NF_OFFSET); 
-
-    ixQMgrAqmIfWordWrite (address, value);
-
-}
-
-PRIVATE void
-ixQMgrAqmIfEntryAddressGet (unsigned int entryIndex,
-			    UINT32 configRegWord,
-			    unsigned int qEntrySizeInwords,
-			    unsigned int qSizeInWords,
-			    UINT32 **address)
-{
-    UINT32 readPtr;
-    UINT32 baseAddress;
-    UINT32 *topOfAqmSram;
-
-    topOfAqmSram = ((UINT32 *)aqmBaseAddress + IX_QMGR_AQM_ADDRESS_SPACE_SIZE_IN_WORDS);
-
-    /* Extract the base address */
-    baseAddress = (UINT32)((configRegWord & IX_QMGR_BADDR_MASK) >>
-			   (IX_QMGR_Q_CONFIG_BADDR_OFFSET));
-
-    /* Base address is a 16 word pointer from the start of AQM SRAM.
-     * Convert to absolute word address.
-     */
-    baseAddress <<= IX_QMGR_BASE_ADDR_16_WORD_SHIFT;
-    baseAddress += ((UINT32)aqmBaseAddress + (UINT32)IX_QMGR_QUECONFIG_BASE_OFFSET);
-
-    /* Extract the read pointer. Read pointer is a word pointer */
-    readPtr = (UINT32)((configRegWord >>
-			IX_QMGR_Q_CONFIG_RDPTR_OFFSET)&IX_QMGR_RDPTR_MASK);
-
-    /* Read/Write pointers(word pointers)  are offsets from the queue buffer space base address.
-     * Calculate the absolute read pointer address. NOTE: Queues are circular buffers.
-     */
-    readPtr  = (readPtr + (entryIndex * qEntrySizeInwords)) & (qSizeInWords - 1); /* Mask by queue size */
-    *address = (UINT32 *)(baseAddress + (readPtr * (IX_QMGR_NUM_BYTES_PER_WORD)));
-
-    switch (qEntrySizeInwords)
-    {
-	case IX_QMGR_Q_ENTRY_SIZE1:
-	    IX_OSAL_ASSERT((*address + IX_QMGR_ENTRY1_OFFSET) < topOfAqmSram);	    
-	    break;
-	case IX_QMGR_Q_ENTRY_SIZE2:
-	    IX_OSAL_ASSERT((*address + IX_QMGR_ENTRY2_OFFSET) < topOfAqmSram);
-	    break;
-	case IX_QMGR_Q_ENTRY_SIZE4:
-	    IX_OSAL_ASSERT((*address + IX_QMGR_ENTRY4_OFFSET) < topOfAqmSram);
-	    break;
-	default:
-	    IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfEntryAddressGet");
-	    break;
-    }
-    
-}
-
-IX_STATUS
-ixQMgrAqmIfQPeek (IxQMgrQId qId,
-		  unsigned int entryIndex,
-		  unsigned int *entry)
-{
-    UINT32 *cfgRegAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(qId));
-    UINT32 *entryAddress = NULL;
-    UINT32 configRegWordOnEntry;
-    UINT32 configRegWordOnExit;
-    unsigned int qEntrySizeInwords;
-    unsigned int qSizeInWords;
-
-    /* Get the queue entry size in words */
-    qEntrySizeInwords = ixQMgrQEntrySizeInWordsGet (qId);
-
-    /* Get the queue size in words */
-    qSizeInWords = ixQMgrQSizeInWordsGet (qId);
-
-    /* Read the config register */
-    ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnEntry);
-
-    /* Get the entry address */
-    ixQMgrAqmIfEntryAddressGet (entryIndex,
-				configRegWordOnEntry,
-				qEntrySizeInwords,
-				qSizeInWords,
-				&entryAddress);
-
-    /* Get the lock or return busy */
-    if (IX_SUCCESS != ixOsalFastMutexTryLock(&ixQMgrAqmIfPeekPokeFastMutex[qId]))
-    {
-	return IX_FAIL;
-    }
-
-    while(qEntrySizeInwords--)
-    {
-	ixQMgrAqmIfWordRead (entryAddress++, entry++);
-    }
-
-    /* Release the lock */
-    ixOsalFastMutexUnlock(&ixQMgrAqmIfPeekPokeFastMutex[qId]);
-
-    /* Read the config register */
-    ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnExit);
-
-    /* Check that the read and write pointers have not changed */
-    if (configRegWordOnEntry != configRegWordOnExit)
-    {
-	return IX_FAIL;
-    }
-
-    return IX_SUCCESS;
-}
-
-IX_STATUS
-ixQMgrAqmIfQPoke (IxQMgrQId qId,
-		  unsigned entryIndex,
-		  unsigned int *entry)
-{
-    UINT32 *cfgRegAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(qId));
-    UINT32 *entryAddress = NULL;
-    UINT32 configRegWordOnEntry;
-    UINT32 configRegWordOnExit;
-    unsigned int qEntrySizeInwords;
-    unsigned int qSizeInWords;
-    
-    /* Get the queue entry size in words */
-    qEntrySizeInwords = ixQMgrQEntrySizeInWordsGet (qId);
-
-    /* Get the queue size in words */
-    qSizeInWords = ixQMgrQSizeInWordsGet (qId);
-
-    /* Read the config register */
-    ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnEntry);
-
-    /* Get the entry address */
-    ixQMgrAqmIfEntryAddressGet (entryIndex,
-				configRegWordOnEntry,
-				qEntrySizeInwords,
-				qSizeInWords,
-				&entryAddress);
-
-    /* Get the lock or return busy */
-    if (IX_SUCCESS != ixOsalFastMutexTryLock(&ixQMgrAqmIfPeekPokeFastMutex[qId]))
-    {
-	return IX_FAIL;
-    }
-
-    /* Else read the entry directly from SRAM. This will not move the read pointer */
-    while(qEntrySizeInwords--)
-    {
-	ixQMgrAqmIfWordWrite (entryAddress++, *entry++);
-    }
-
-    /* Release the lock */
-    ixOsalFastMutexUnlock(&ixQMgrAqmIfPeekPokeFastMutex[qId]);
-
-    /* Read the config register */
-    ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnExit);
-
-    /* Check that the read and write pointers have not changed */
-    if (configRegWordOnEntry != configRegWordOnExit)
-    {
-	return IX_FAIL;
-    }
-
-    return IX_SUCCESS;
-}
-
-PRIVATE unsigned
-watermarkToAqmWatermark (IxQMgrWMLevel watermark )
-{
-    unsigned aqmWatermark = 0;
-
-    /*
-     * Watermarks 0("000"),1("001"),2("010"),4("011"),
-     * 8("100"),16("101"),32("110"),64("111")
-     */
-    aqmWatermark = ixQMgrAqmIfLog2 (watermark * 2);
-    
-    return aqmWatermark;
-}
-
-PRIVATE unsigned
-entrySizeToAqmEntrySize (IxQMgrQEntrySizeInWords entrySize)
-{
-    /* entrySize  1("00"),2("01"),4("10") */
-    return (ixQMgrAqmIfLog2 (entrySize));
-}
-
-PRIVATE unsigned
-bufferSizeToAqmBufferSize (unsigned bufferSizeInWords)
-{
-    /* bufferSize 16("00"),32("01),64("10"),128("11") */
-    return (ixQMgrAqmIfLog2 (bufferSizeInWords / IX_QMGR_MIN_BUFFER_SIZE));
-}
-
-/*
- * Reset AQM registers to default values.
- */
-PRIVATE void
-ixQMgrAqmIfRegistersReset (void)
-{
-    volatile UINT32 *qConfigWordAddress = NULL;
-    unsigned int i;
-
-    /*
-     * Need to initialize AQM hardware registers to an initial
-     * value as init may have been called as a result of a soft
-     * reset. i.e. soft reset does not reset hardware registers.
-     */
-
-    /* Reset queues 0..31 status registers 0..3 */
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT0_OFFSET), 
-			 IX_QMGR_QUELOWSTAT_RESET_VALUE);
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT1_OFFSET), 
-			 IX_QMGR_QUELOWSTAT_RESET_VALUE);
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT2_OFFSET), 
-			 IX_QMGR_QUELOWSTAT_RESET_VALUE);
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT3_OFFSET), 
-			 IX_QMGR_QUELOWSTAT_RESET_VALUE);
-
-    /* Reset underflow/overflow status registers 0..1 */
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUOSTAT0_OFFSET), 
-			 IX_QMGR_QUEUOSTAT_RESET_VALUE);
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUOSTAT1_OFFSET), 
-			 IX_QMGR_QUEUOSTAT_RESET_VALUE);
-    
-    /* Reset queues 32..63 nearly empty status registers */
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUPPSTAT0_OFFSET),
-			 IX_QMGR_QUEUPPSTAT0_RESET_VALUE);
-
-    /* Reset queues 32..63 full status registers */
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUPPSTAT1_OFFSET),
-			 IX_QMGR_QUEUPPSTAT1_RESET_VALUE);
-
-    /* Reset int0 status flag source select registers 0..3 */
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG0_OFFSET),
-			 IX_QMGR_INT0SRCSELREG_RESET_VALUE);
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG1_OFFSET),
-			 IX_QMGR_INT0SRCSELREG_RESET_VALUE);
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG2_OFFSET),
-			 IX_QMGR_INT0SRCSELREG_RESET_VALUE);
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG3_OFFSET),
-			 IX_QMGR_INT0SRCSELREG_RESET_VALUE);
-	 
-    /* Reset queue interrupt enable register 0..1 */
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEIEREG0_OFFSET),
-			 IX_QMGR_QUEIEREG_RESET_VALUE);
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEIEREG1_OFFSET),
-			 IX_QMGR_QUEIEREG_RESET_VALUE);
-
-    /* Reset queue interrupt register 0..1 */
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QINTREG0_OFFSET),
-			 IX_QMGR_QINTREG_RESET_VALUE);
-    ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QINTREG1_OFFSET),
-			 IX_QMGR_QINTREG_RESET_VALUE);
-
-    /* Reset queue configuration words 0..63 */
-    qConfigWordAddress = (UINT32 *)(aqmBaseAddress + IX_QMGR_QUECONFIG_BASE_OFFSET);
-    for (i = 0; i < (IX_QMGR_QUECONFIG_SIZE / sizeof(UINT32)); i++)
-    {
-	ixQMgrAqmIfWordWrite(qConfigWordAddress,
-			     IX_QMGR_QUECONFIG_RESET_VALUE);
-	/* Next word */
-	qConfigWordAddress++;
-    }
-}
-
diff --git a/drivers/net/npe/IxQMgrDispatcher.c b/drivers/net/npe/IxQMgrDispatcher.c
deleted file mode 100644
index 2baeaaf..0000000
--- a/drivers/net/npe/IxQMgrDispatcher.c
+++ /dev/null
@@ -1,1320 +0,0 @@
-/**
- * @file    IxQMgrDispatcher.c
- *
- * @author Intel Corporation
- * @date    20-Dec-2001
- *    
- * @brief   This file contains the implementation of the Dispatcher sub component
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * User defined include files.
- */
-#include "IxQMgr.h"
-#include "IxQMgrAqmIf_p.h"
-#include "IxQMgrQCfg_p.h"
-#include "IxQMgrDispatcher_p.h"
-#include "IxQMgrLog_p.h"
-#include "IxQMgrDefines_p.h"
-#include "IxFeatureCtrl.h"
-#include "IxOsal.h"
-
-
-
-/*
- * #defines and macros used in this file.
- */
-
-
-/*
- * This constant is used to indicate the number of priority levels supported
- */
-#define IX_QMGR_NUM_PRIORITY_LEVELS 3
-
-/* 
- * This constant is used to set the size of the array of status words
- */
-#define MAX_Q_STATUS_WORDS      4
-
-/*
- * This macro is used to check if a given priority is valid
- */
-#define IX_QMGR_DISPATCHER_PRIORITY_CHECK(priority) \
-(((priority) >= IX_QMGR_Q_PRIORITY_0) && ((priority) <= IX_QMGR_Q_PRIORITY_2))
-
-/*
- * This macto is used to check that a given interrupt source is valid
- */
-#define IX_QMGR_DISPATCHER_SOURCE_ID_CHECK(srcSel) \
-(((srcSel) >= IX_QMGR_Q_SOURCE_ID_E) && ((srcSel) <= IX_QMGR_Q_SOURCE_ID_NOT_F))
-
-/*
- * Number of times a dummy callback is called before logging a trace
- * message
- */
-#define LOG_THROTTLE_COUNT 1000000
-
-/* Priority tables limits */
-#define IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX (0)
-#define IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX (16)
-#define IX_QMGR_MAX_LOW_QUE_PRIORITY_TABLE_INDEX (31)
-#define IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX (32)
-#define IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX (48)
-#define IX_QMGR_MAX_UPP_QUE_PRIORITY_TABLE_INDEX (63)
- 
-/*
- * This macro is used to check if a given callback type is valid
- */
-#define IX_QMGR_DISPATCHER_CALLBACK_TYPE_CHECK(type) \
-            (((type) >= IX_QMGR_TYPE_REALTIME_OTHER) && \
-            ((type) <= IX_QMGR_TYPE_REALTIME_SPORADIC))
-
-/* 
- * define max index in lower queue to use in loops 
- */
-#define IX_QMGR_MAX_LOW_QUE_TABLE_INDEX (31)
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/*
- * Information on a queue needed by the Dispatcher
- */
-typedef struct 
-{
-    IxQMgrCallback callback;       /* Notification callback                  */
-    IxQMgrCallbackId callbackId;   /* Notification callback identifier       */
-    unsigned dummyCallbackCount;   /* Number of times runs of dummy callback */
-    IxQMgrPriority priority;       /* Dispatch priority                      */
-    unsigned int statusWordOffset; /* Offset to the status word to check     */
-    UINT32 statusMask;             /* Status mask                            */    
-    UINT32 statusCheckValue;       /* Status check value                     */
-    UINT32 intRegCheckMask;	   /* Interrupt register check mask          */
-} IxQMgrQInfo;
-
-/*
- * Variable declarations global to this file. Externs are followed by
- * statics.
- */
-
-/* 
- * Flag to keep record of what dispatcher set in featureCtrl when ixQMgrInit()
- * is called. This is needed because it is possible that a client might
- * change whether the live lock prevention dispatcher is used between
- * calls to ixQMgrInit() and ixQMgrDispatcherLoopGet(). 
- */
-PRIVATE IX_STATUS ixQMgrOrigB0Dispatcher = IX_FEATURE_CTRL_COMPONENT_ENABLED;
-
-/* 
- * keep record of Q types - not in IxQMgrQInfo for performance as
- * it is only used with ixQMgrDispatcherLoopRunB0LLP()
- */
-PRIVATE IxQMgrType ixQMgrQTypes[IX_QMGR_MAX_NUM_QUEUES];
-
-/*
- * This array contains a list of queue identifiers ordered by priority. The table
- * is split logically between queue identifiers 0-31 and 32-63.
- */
-static IxQMgrQId priorityTable[IX_QMGR_MAX_NUM_QUEUES];
-
-/*
- * This flag indicates to the dispatcher that the priority table needs to be rebuilt.
- */
-static BOOL rebuildTable = false;
-
-/* Dispatcher statistics */
-static IxQMgrDispatcherStats dispatcherStats;
-
-/* Table of queue information */
-static IxQMgrQInfo dispatchQInfo[IX_QMGR_MAX_NUM_QUEUES];
-
-/* Masks use to identify the first queues in the priority tables 
-*  when comparing with the interrupt register
-*/
-static unsigned int lowPriorityTableFirstHalfMask;
-static unsigned int uppPriorityTableFirstHalfMask;
-
-/*
- * Static function prototypes
- */
-
-/*
- * This function is the default callback for all queues
- */
-PRIVATE void
-dummyCallback (IxQMgrQId qId,	      
-	       IxQMgrCallbackId cbId);
-
-PRIVATE void
-ixQMgrDispatcherReBuildPriorityTable (void);
-
-/*
- * Function definitions.
- */
-void
-ixQMgrDispatcherInit (void)
-{
-    int i;
-    IxFeatureCtrlProductId productId = 0;
-    IxFeatureCtrlDeviceId deviceId = 0;
-    BOOL stickyIntSilicon = true;
-
-    /* Set default priorities */
-    for (i=0; i< IX_QMGR_MAX_NUM_QUEUES; i++)
-    {
-	dispatchQInfo[i].callback = dummyCallback;
-	dispatchQInfo[i].callbackId = 0;
-	dispatchQInfo[i].dummyCallbackCount = 0;
-	dispatchQInfo[i].priority = IX_QMGR_Q_PRIORITY_2;
-	dispatchQInfo[i].statusWordOffset = 0;
-	dispatchQInfo[i].statusCheckValue = 0;
-	dispatchQInfo[i].statusMask = 0;  
-        /* 
-	 * There are two interrupt registers, 32 bits each. One for the lower
-	 * queues(0-31) and one for the upper queues(32-63). Therefore need to
-	 * mod by 32 i.e the min upper queue identifier.
-	 */
-	dispatchQInfo[i].intRegCheckMask = (1<<(i%(IX_QMGR_MIN_QUEUPP_QID)));
-
-        /* 
-         * Set the Q types - will only be used with livelock 
-         */
-        ixQMgrQTypes[i] = IX_QMGR_TYPE_REALTIME_OTHER;
-
-	/* Reset queue statistics */
-	dispatcherStats.queueStats[i].callbackCnt = 0;
-	dispatcherStats.queueStats[i].priorityChangeCnt = 0;
-	dispatcherStats.queueStats[i].intNoCallbackCnt = 0;
-	dispatcherStats.queueStats[i].intLostCallbackCnt = 0;
-        dispatcherStats.queueStats[i].notificationEnabled = false;
-        dispatcherStats.queueStats[i].srcSel = 0;
-
-    }
-
-    /* Priority table. Order the table from queue 0 to 63 */
-    ixQMgrDispatcherReBuildPriorityTable();
-
-    /* Reset statistics */
-    dispatcherStats.loopRunCnt = 0;
-
-    /* Get the device ID for the underlying silicon */
-    deviceId = ixFeatureCtrlDeviceRead();
-    
-    /* Get the product ID for the underlying silicon */
-    productId = ixFeatureCtrlProductIdRead();
-
-    /* 
-     * Check featureCtrl to see if Livelock prevention is required 
-     */
-    ixQMgrOrigB0Dispatcher = ixFeatureCtrlSwConfigurationCheck( 
-                                 IX_FEATURECTRL_ORIGB0_DISPATCHER);
-
-    /*
-     * Check if the silicon supports the sticky interrupt feature.
-     * IF (IXP42X AND A0) -> No sticky interrupt feature supported 
-     */
-    if ((IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X == 
-        (IX_FEATURE_CTRL_DEVICE_TYPE_MASK & deviceId)) &&
-        (IX_FEATURE_CTRL_SILICON_TYPE_A0 == 
-        (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId))) 
-    {
-       stickyIntSilicon = false;
-    }
-
-    /*
-     * IF user wants livelock prev option AND silicon supports sticky interrupt 
-     * feature -> enable the sticky interrupt bit
-     */
-    if ((IX_FEATURE_CTRL_SWCONFIG_DISABLED == ixQMgrOrigB0Dispatcher) &&
-         stickyIntSilicon)  
-    {
-        ixQMgrStickyInterruptRegEnable();
-    }
-}
-
-IX_STATUS
-ixQMgrDispatcherPrioritySet (IxQMgrQId qId,
-			     IxQMgrPriority priority)
-{   
-    int ixQMgrLockKey;
-
-    if (!ixQMgrQIsConfigured(qId))
-    {
-	return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-    
-    if (!IX_QMGR_DISPATCHER_PRIORITY_CHECK(priority))
-    {
-	return IX_QMGR_Q_INVALID_PRIORITY;
-    }
-
-    ixQMgrLockKey = ixOsalIrqLock();
-    
-    /* Change priority */
-    dispatchQInfo[qId].priority = priority;
-    /* Set flag */
-    rebuildTable = true;
-
-    ixOsalIrqUnlock(ixQMgrLockKey);
-
-#ifndef NDEBUG
-    /* Update statistics */
-    dispatcherStats.queueStats[qId].priorityChangeCnt++;
-#endif
-
-    return IX_SUCCESS;
-}
-
-IX_STATUS
-ixQMgrNotificationCallbackSet (IxQMgrQId qId,
-			       IxQMgrCallback callback,
-			       IxQMgrCallbackId callbackId)
-{
-    if (!ixQMgrQIsConfigured(qId))
-    {
-	return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-
-    if (NULL == callback)
-    {
-	/* Reset to dummy callback */
-	dispatchQInfo[qId].callback = dummyCallback;
-	dispatchQInfo[qId].dummyCallbackCount = 0;
-	dispatchQInfo[qId].callbackId = 0;
-    }
-    else 
-    {
-	dispatchQInfo[qId].callback = callback;
-	dispatchQInfo[qId].callbackId = callbackId;
-    }
-
-    return IX_SUCCESS;
-}
-
-IX_STATUS
-ixQMgrNotificationEnable (IxQMgrQId qId, 
-			  IxQMgrSourceId srcSel)
-{
-    IxQMgrQStatus qStatusOnEntry;/* The queue status on entry/exit */
-    IxQMgrQStatus qStatusOnExit; /* to this function               */
-    int ixQMgrLockKey;
-
-#ifndef NDEBUG
-    if (!ixQMgrQIsConfigured (qId))
-    {
-	return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-
-    if ((qId < IX_QMGR_MIN_QUEUPP_QID) &&
-       !IX_QMGR_DISPATCHER_SOURCE_ID_CHECK(srcSel))
-    {
-	/* QId 0-31 source id invalid */
-	return IX_QMGR_INVALID_INT_SOURCE_ID;
-    }
-
-    if ((IX_QMGR_Q_SOURCE_ID_NE != srcSel) &&
-	(qId >= IX_QMGR_MIN_QUEUPP_QID))
-    {
-	/*
-	 * For queues 32-63 the interrupt source is fixed to the Nearly
-	 * Empty status flag and therefore should have a srcSel of NE.
-	 */
-	return IX_QMGR_INVALID_INT_SOURCE_ID;
-    }
-#endif
-
-#ifndef NDEBUG
-    dispatcherStats.queueStats[qId].notificationEnabled = true;
-    dispatcherStats.queueStats[qId].srcSel = srcSel;
-#endif
-
-    /* Get the current queue status */
-    ixQMgrAqmIfQueStatRead (qId, &qStatusOnEntry);
-  
-    /* 
-     * Enabling interrupts results in Read-Modify-Write
-     * so need critical section
-     */
-
-    ixQMgrLockKey = ixOsalIrqLock();
-
-    /* Calculate the checkMask and checkValue for this q */
-    ixQMgrAqmIfQStatusCheckValsCalc (qId,
-				     srcSel,
-				     &dispatchQInfo[qId].statusWordOffset,
-				     &dispatchQInfo[qId].statusCheckValue,
-				     &dispatchQInfo[qId].statusMask);
-
-
-    /* Set the interrupt source is this queue is in the range 0-31 */
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-	ixQMgrAqmIfIntSrcSelWrite (qId, srcSel);
-    }
-
-    /* Enable the interrupt */
-    ixQMgrAqmIfQInterruptEnable (qId);
-
-    ixOsalIrqUnlock(ixQMgrLockKey);
-    
-    /* Get the current queue status */
-    ixQMgrAqmIfQueStatRead (qId, &qStatusOnExit);
-  
-    /* If the status has changed return a warning */
-    if (qStatusOnEntry != qStatusOnExit)
-    {
-	return IX_QMGR_WARNING;
-    }
-    
-    return IX_SUCCESS;
-}
-
-
-IX_STATUS
-ixQMgrNotificationDisable (IxQMgrQId qId)
-{
-    int ixQMgrLockKey;
-
-#ifndef NDEBUG
-    /* Validate parameters */
-    if (!ixQMgrQIsConfigured (qId))
-    {
-	return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-#endif
-  
-    /* 
-     * Enabling interrupts results in Read-Modify-Write
-     * so need critical section
-     */
-#ifndef NDEBUG
-    dispatcherStats.queueStats[qId].notificationEnabled = false;
-#endif
-
-    ixQMgrLockKey = ixOsalIrqLock();
-
-    ixQMgrAqmIfQInterruptDisable (qId);
-    
-    ixOsalIrqUnlock(ixQMgrLockKey);
-
-    return IX_SUCCESS;    
-}
-
-void 
-ixQMgrStickyInterruptRegEnable(void)
-{
- /* Use Aqm If function to set Interrupt Register0 Bit-3 */ 
- ixQMgrAqmIfIntSrcSelReg0Bit3Set ();   
-}
-
-#if !defined __XSCALE__ || defined __linux
-
-/* Count the number of leading zero bits in a word,
- * and return the same value than the CLZ instruction.
- *
- * word (in)    return value (out)
- * 0x80000000   0
- * 0x40000000   1
- * ,,,          ,,,
- * 0x00000002   30
- * 0x00000001   31
- * 0x00000000   32
- *
- * The C version of this function is used as a replacement 
- * for system not providing the equivalent of the CLZ 
- * assembly language instruction.
- *
- * Note that this version is big-endian
- */
-unsigned int
-ixQMgrCountLeadingZeros(UINT32 word)
-{
-  unsigned int leadingZerosCount = 0;
-
-  if (word == 0)
-  {
-      return 32;
-  }
-  /* search the first bit set by testing the MSB and shifting the input word */
-  while ((word & 0x80000000) == 0)
-  {
-      word <<= 1;
-      leadingZerosCount++;
-  }
-  return leadingZerosCount;
-}
-#endif /* not  __XSCALE__ or __linux */
-
-void
-ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr)
-{
-  IxFeatureCtrlProductId productId = 0;
-  IxFeatureCtrlDeviceId deviceId = 0;
-  
-  /* Get the device ID for the underlying silicon */
-  deviceId = ixFeatureCtrlDeviceRead();
-
-  /* Get the product ID for the underlying silicon */
-  productId = ixFeatureCtrlProductIdRead ();
-
-  /* IF (IXP42X AND A0 silicon) -> use ixQMgrDispatcherLoopRunA0 */
-  if ((IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X ==
-      (IX_FEATURE_CTRL_DEVICE_TYPE_MASK & deviceId)) &&
-      (IX_FEATURE_CTRL_SILICON_TYPE_A0 ==  
-      (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId)))  
-  {
-    /*For IXP42X A0 silicon */
-    *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunA0 ;
-  } 
-  else /*For IXP42X B0 or IXP46X silicon*/ 
-  { 
-    if (IX_FEATURE_CTRL_SWCONFIG_ENABLED == ixQMgrOrigB0Dispatcher)
-    {
-        /* Default for IXP42X B0 and IXP46X silicon */
-        *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunB0;
-    }
-    else 
-    {
-        /* FeatureCtrl indicated that livelock dispatcher be used */
-        *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunB0LLP;
-    }
-  }
-}
-
-void
-ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group)
-{
-    UINT32 intRegVal;                /* Interrupt reg val */
-    UINT32 intRegValAfterWrite;      /* Interrupt reg val after writing back */
-    UINT32 intRegCheckMask;          /* Mask for checking interrupt bits */
-    UINT32 qStatusWordsB4Write[MAX_Q_STATUS_WORDS];  /* Status b4 interrupt write */
-    UINT32 qStatusWordsAfterWrite[MAX_Q_STATUS_WORDS]; /* Status after interrupt write */
-    IxQMgrQInfo *currDispatchQInfo;
-    BOOL statusChangeFlag;
-
-    int priorityTableIndex;/* Priority table index */
-    int qIndex;            /* Current queue being processed */
-    int endIndex;          /* Index of last queue to process */
-
-#ifndef NDEBUG
-    IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || 
-	      (group == IX_QMGR_QUELOW_GROUP));
-#endif
-
-    /* Read Q status registers before interrupt status read/write */
-    ixQMgrAqmIfQStatusRegsRead (group, qStatusWordsB4Write);
-
-    /* Read the interrupt register */
-    ixQMgrAqmIfQInterruptRegRead (group, &intRegVal);
-
-    /* No bit set : nothing to process (the reaminder of the algorithm is
-    * based on the fact that the interrupt register value contains at
-    * least one bit set
-    */
-    if (intRegVal == 0) 
-    {
-#ifndef NDEBUG
-	/* Update statistics */
-	dispatcherStats.loopRunCnt++;
-#endif
-
-	/* Rebuild the priority table if needed */
-	if (rebuildTable)
-	{
-	    ixQMgrDispatcherReBuildPriorityTable ();
-	}
-
-	return;
-    }
-   
-    /* Write it back to clear the interrupt */
-    ixQMgrAqmIfQInterruptRegWrite (group, intRegVal);
-
-    /* Read Q status registers after interrupt status read/write */
-    ixQMgrAqmIfQStatusRegsRead (group, qStatusWordsAfterWrite);
- 
-    /* get the first queue Id from the interrupt register value */
-    qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal);
-
-    /* check if any change occured during hw register modifications */ 
-    if (IX_QMGR_QUELOW_GROUP == group)
-    {
-	statusChangeFlag = 
-	    (qStatusWordsB4Write[0] != qStatusWordsAfterWrite[0]) ||
-	    (qStatusWordsB4Write[1] != qStatusWordsAfterWrite[1]) ||
-	    (qStatusWordsB4Write[2] != qStatusWordsAfterWrite[2]) ||
-	    (qStatusWordsB4Write[3] != qStatusWordsAfterWrite[3]);
-    }
-    else
-    {
-	statusChangeFlag = 
-	    (qStatusWordsB4Write[0] != qStatusWordsAfterWrite[0]);
-	/* Set the queue range based on the queue group to proccess */
-	qIndex += IX_QMGR_MIN_QUEUPP_QID;
-    }
-
-    if (statusChangeFlag == false)
-    {
-	/* check if the interrupt register contains 
-	 * only 1 bit set (happy day scenario)
-	 */
-	currDispatchQInfo = &dispatchQInfo[qIndex];
-	if (intRegVal == currDispatchQInfo->intRegCheckMask)
-	{
-	    /* only 1 queue event triggered a notification *
-	     * Call the callback function for this queue 
-	     */
-	    currDispatchQInfo->callback (qIndex,
-					 currDispatchQInfo->callbackId);  
-#ifndef NDEBUG
-	    /* Update statistics */
-	    dispatcherStats.queueStats[qIndex].callbackCnt++;
-#endif
-	}
-	else 
-	{
-	    /* the event is triggered by more than 1 queue, 
-	     * the queue search will be starting from the beginning
-	     * or the middle of the priority table
-	     *
-	     * the serach will end when all the bits of the interrupt
-	     * register are cleared. There is no need to maintain
-	     * a seperate value and test it at each iteration.
-	     */
-	    if (IX_QMGR_QUELOW_GROUP == group)
-	    {
-		/* check if any bit related to queues in the first
-		 * half of the priority table is set
-		 */
-		if (intRegVal & lowPriorityTableFirstHalfMask)
-		{
-		    priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX;
-		}
-		else
-		{
-		    priorityTableIndex = IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX;
-		}
-	    }
-	    else 
-	    {
-		/* check if any bit related to queues in the first
-		 * half of the priority table is set
-		 */
-		if (intRegVal & uppPriorityTableFirstHalfMask)
-		{
-		    priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
-		}
-		else
-		{
-		    priorityTableIndex = IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX;
-		}
-	    }
-	    
-	    /* iterate following the priority table until all the bits 
-	     * of the interrupt register are cleared.
-	     */
-	    do
-	    {
-		qIndex = priorityTable[priorityTableIndex++];
-		currDispatchQInfo = &dispatchQInfo[qIndex];
-		intRegCheckMask = currDispatchQInfo->intRegCheckMask;
-		
-		/* If this queue caused this interrupt to be raised */
-		if (intRegVal & intRegCheckMask)
-		{
-		    /* Call the callback function for this queue */
-		    currDispatchQInfo->callback (qIndex,
-						 currDispatchQInfo->callbackId);
-#ifndef NDEBUG
-		    /* Update statistics */
-		    dispatcherStats.queueStats[qIndex].callbackCnt++;
-#endif
-		    
-		    /* Clear the interrupt register bit */
-		    intRegVal &= ~intRegCheckMask;
-		}
-	    }
-	    while(intRegVal);
-	}
-    }
-    else
-    {
-    /* A change in queue status occured during the hw interrupt
-     * register update. To maintain the interrupt consistency, it
-     * is necessary to iterate through all queues of the queue group.
-     */
-
-    /* Read interrupt status again */
-    ixQMgrAqmIfQInterruptRegRead (group, &intRegValAfterWrite);
-
-    if (IX_QMGR_QUELOW_GROUP == group)
-    {
-	priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX;
-	endIndex = IX_QMGR_MAX_LOW_QUE_PRIORITY_TABLE_INDEX;
-    }
-    else
-    {
-	priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
-	endIndex = IX_QMGR_MAX_UPP_QUE_PRIORITY_TABLE_INDEX;
-    }
-
-    for ( ; priorityTableIndex<=endIndex; priorityTableIndex++)
-    {
-	qIndex = priorityTable[priorityTableIndex];
-	currDispatchQInfo = &dispatchQInfo[qIndex];
-	intRegCheckMask = currDispatchQInfo->intRegCheckMask;
-
-	/* If this queue caused this interrupt to be raised */
-	if (intRegVal & intRegCheckMask)
-	{  
-	    /* Call the callback function for this queue */
-	    currDispatchQInfo->callback (qIndex,
-					 currDispatchQInfo->callbackId);
-#ifndef NDEBUG
-	    /* Update statistics */
-	    dispatcherStats.queueStats[qIndex].callbackCnt++;
-#endif
-	    
-	} /* if (intRegVal .. */
-
-	/* 
-	 * If interrupt bit is set in intRegValAfterWrite don't
-	 * proceed as this will be caught in next interrupt
-	 */
-	else if ((intRegValAfterWrite & intRegCheckMask) == 0)
-	{
-	    /* Check if an interrupt was lost for this Q */
-	    if (ixQMgrAqmIfQStatusCheck(qStatusWordsB4Write,
-					qStatusWordsAfterWrite,
-					currDispatchQInfo->statusWordOffset,
-					currDispatchQInfo->statusCheckValue,
-					currDispatchQInfo->statusMask))
-	    {
-		/* Call the callback function for this queue */
-		currDispatchQInfo->callback (qIndex, 
-					     dispatchQInfo[qIndex].callbackId);                 
-#ifndef NDEBUG
-		/* Update statistics */
-		dispatcherStats.queueStats[qIndex].callbackCnt++;
-		dispatcherStats.queueStats[qIndex].intLostCallbackCnt++;
-#endif
-	    } /* if ixQMgrAqmIfQStatusCheck(.. */
-	} /* else if ((intRegValAfterWrite ... */
-    } /* for (priorityTableIndex=0 ... */
-    }
-
-    /* Rebuild the priority table if needed */
-    if (rebuildTable)
-    {
-	ixQMgrDispatcherReBuildPriorityTable ();
-    }
-
-#ifndef NDEBUG
-    /* Update statistics */
-    dispatcherStats.loopRunCnt++;
-#endif
-}
-
-
-
-void
-ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group)
-{
-    UINT32 intRegVal;                /* Interrupt reg val */
-    UINT32 intRegCheckMask;          /* Mask for checking interrupt bits */
-    IxQMgrQInfo *currDispatchQInfo;
-
-
-    int priorityTableIndex; /* Priority table index */
-    int qIndex;             /* Current queue being processed */
-
-#ifndef NDEBUG
-    IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) ||
-              (group == IX_QMGR_QUELOW_GROUP));
-    IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || 
-	      (group == IX_QMGR_QUELOW_GROUP));
-#endif
-
-    /* Read the interrupt register */
-    ixQMgrAqmIfQInterruptRegRead (group, &intRegVal);
-
-
-    /* No queue has interrupt register set */
-    if (intRegVal != 0)
-    {
-
-            /* Write it back to clear the interrupt */
-            ixQMgrAqmIfQInterruptRegWrite (group, intRegVal);
-
-            /* get the first queue Id from the interrupt register value */
-            qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal);
-
-            if (IX_QMGR_QUEUPP_GROUP == group)
-            {
-                /* Set the queue range based on the queue group to proccess */
-                qIndex += IX_QMGR_MIN_QUEUPP_QID;
-            }
-
-            /* check if the interrupt register contains
-             * only 1 bit set
-             * For example:
-             *                                        intRegVal = 0x0010
-             *               currDispatchQInfo->intRegCheckMask = 0x0010
-             *    intRegVal == currDispatchQInfo->intRegCheckMask is true.
-             */
-             currDispatchQInfo = &dispatchQInfo[qIndex];
-             if (intRegVal == currDispatchQInfo->intRegCheckMask)
-             {
-                /* only 1 queue event triggered a notification *
-                 * Call the callback function for this queue
-                 */
-                currDispatchQInfo->callback (qIndex,
-                                     currDispatchQInfo->callbackId);
-#ifndef NDEBUG
-                /* Update statistics */
-                dispatcherStats.queueStats[qIndex].callbackCnt++;
-#endif
-             }
-             else
-             {
-                 /* the event is triggered by more than 1 queue,
-                  * the queue search will be starting from the beginning
-                  * or the middle of the priority table
-                  *
-                  * the serach will end when all the bits of the interrupt
-                  * register are cleared. There is no need to maintain
-                  * a seperate value and test it at each iteration.
-                  */
-                 if (IX_QMGR_QUELOW_GROUP == group)
-                 {
-                     /* check if any bit related to queues in the first
-                      * half of the priority table is set
-                      */
-                     if (intRegVal & lowPriorityTableFirstHalfMask)
-                     {
-                         priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX;
-                     }
-                     else
-                     {
-                         priorityTableIndex = IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX;
-                     }
-                 }
-                else
-                 {
-                     /* check if any bit related to queues in the first
-                      * half of the priority table is set
-                      */
-                     if (intRegVal & uppPriorityTableFirstHalfMask)
-                     {
-                         priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
-                     }
-                     else
-                     {
-                         priorityTableIndex = IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX;
-                     }
-                 }
-
-                 /* iterate following the priority table until all the bits
-                  * of the interrupt register are cleared.
-                  */
-                 do
-                 {
-                     qIndex = priorityTable[priorityTableIndex++];
-                     currDispatchQInfo = &dispatchQInfo[qIndex];
-                     intRegCheckMask = currDispatchQInfo->intRegCheckMask;
-
-                     /* If this queue caused this interrupt to be raised */
-                     if (intRegVal & intRegCheckMask)
-                     {
-                         /* Call the callback function for this queue */
-                         currDispatchQInfo->callback (qIndex,
-                                              currDispatchQInfo->callbackId);
-#ifndef NDEBUG
-                         /* Update statistics */
-                         dispatcherStats.queueStats[qIndex].callbackCnt++;
-#endif
-
-                         /* Clear the interrupt register bit */
-                         intRegVal &= ~intRegCheckMask;
-                     }
-                  }
-                  while(intRegVal);
-             } /*End of intRegVal == currDispatchQInfo->intRegCheckMask */
-     } /* End of intRegVal != 0 */
-
-#ifndef NDEBUG
-    /* Update statistics */
-    dispatcherStats.loopRunCnt++;
-#endif
-
-    /* Rebuild the priority table if needed */
-    if (rebuildTable)
-    {
-        ixQMgrDispatcherReBuildPriorityTable ();
-    }
-}
-
-void
-ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group)
-{
-    UINT32 intRegVal =0;                /* Interrupt reg val */
-    UINT32 intRegCheckMask;          /* Mask for checking interrupt bits */
-    IxQMgrQInfo *currDispatchQInfo;
-
-    int priorityTableIndex; /* Priority table index */
-    int qIndex;             /* Current queue being processed */
-
-    UINT32 intRegValCopy = 0;
-    UINT32 intEnableRegVal = 0;
-    UINT8 i = 0;
-
-#ifndef NDEBUG
-    IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) ||
-              (group == IX_QMGR_QUELOW_GROUP));
-#endif
-
-    /* Read the interrupt register */
-    ixQMgrAqmIfQInterruptRegRead (group, &intRegVal);
-
-    /* 
-     * mask any interrupts that are not enabled 
-     */
-    ixQMgrAqmIfQInterruptEnableRegRead (group, &intEnableRegVal);
-    intRegVal &= intEnableRegVal;
-
-    /* No queue has interrupt register set */
-    if (intRegVal != 0)
-    {
-        if (IX_QMGR_QUELOW_GROUP == group)
-        {
-            /*
-             * As the sticky bit is set, the interrupt register will 
-             * not clear if write back at this point because the condition
-             * has not been cleared. Take a copy and write back later after
-             * the condition has been cleared
-             */
-            intRegValCopy = intRegVal;
-        }
-        else
-        {
-            /* no sticky for upper Q's, so write back now */
-            ixQMgrAqmIfQInterruptRegWrite (group, intRegVal);
-        }
-
-        /* get the first queue Id from the interrupt register value */
-        qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal);
-
-        if (IX_QMGR_QUEUPP_GROUP == group)
-        {
-            /* Set the queue range based on the queue group to proccess */
-            qIndex += IX_QMGR_MIN_QUEUPP_QID;
-        }
-
-        /* check if the interrupt register contains
-        * only 1 bit set
-        * For example:
-        *                                        intRegVal = 0x0010
-        *               currDispatchQInfo->intRegCheckMask = 0x0010
-        *    intRegVal == currDispatchQInfo->intRegCheckMask is true.
-        */
-        currDispatchQInfo = &dispatchQInfo[qIndex];
-        if (intRegVal == currDispatchQInfo->intRegCheckMask)
-        {
-
-            /* 
-             * check if Q type periodic -  only lower queues can
-             * have there type set to periodic 
-             */
-            if (IX_QMGR_TYPE_REALTIME_PERIODIC == ixQMgrQTypes[qIndex])
-            {
-                /* 
-                 * Disable the notifications on any sporadics 
-                 */
-                for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++)
-                {
-                    if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrQTypes[i])
-                    {
-                        ixQMgrNotificationDisable(i);
-#ifndef NDEBUG
-                        /* Update statistics */
-                        dispatcherStats.queueStats[i].disableCount++;
-#endif
-                    }
-                }
-            }
-
-            currDispatchQInfo->callback (qIndex,
-                                         currDispatchQInfo->callbackId);
-#ifndef NDEBUG
-            /* Update statistics */
-            dispatcherStats.queueStats[qIndex].callbackCnt++;
-#endif
-        }
-        else
-        {
-            /* the event is triggered by more than 1 queue,
-            * the queue search will be starting from the beginning
-            * or the middle of the priority table
-            *
-            * the serach will end when all the bits of the interrupt
-            * register are cleared. There is no need to maintain
-            * a seperate value and test it at each iteration.
-            */
-            if (IX_QMGR_QUELOW_GROUP == group)
-            {
-                /* check if any bit related to queues in the first
-                 * half of the priority table is set
-                 */
-                if (intRegVal & lowPriorityTableFirstHalfMask)
-                {
-                    priorityTableIndex =
-                                       IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX;
-                }
-                else
-                {
-                    priorityTableIndex =
-                                       IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX;
-                }
-            }
-            else
-            {
-                /* check if any bit related to queues in the first
-                 * half of the priority table is set
-                 */
-                if (intRegVal & uppPriorityTableFirstHalfMask)
-                {
-                    priorityTableIndex =
-                                       IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
-                }
-                else
-                {
-                    priorityTableIndex =
-                                       IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX;
-                }
-            }
-
-            /* iterate following the priority table until all the bits
-             * of the interrupt register are cleared.
-             */
-            do
-            {
-                qIndex = priorityTable[priorityTableIndex++];
-                currDispatchQInfo = &dispatchQInfo[qIndex];
-                intRegCheckMask = currDispatchQInfo->intRegCheckMask;
-
-                /* If this queue caused this interrupt to be raised */
-                if (intRegVal & intRegCheckMask)
-                {
-                    /* 
-                     * check if Q type periodic - only lower queues can
-                     * have there type set to periodic. There can only be one
-                     * periodic queue, so the sporadics are only disabled once.
-                     */
-                    if (IX_QMGR_TYPE_REALTIME_PERIODIC == ixQMgrQTypes[qIndex])
-                    {
-                        /* 
-                         * Disable the notifications on any sporadics 
-                         */
-                        for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++)
-                        {
-                            if (IX_QMGR_TYPE_REALTIME_SPORADIC == 
-                                    ixQMgrQTypes[i])
-                            {
-                                ixQMgrNotificationDisable(i);
-                                /* 
-                                 * remove from intRegVal as we don't want 
-                                 * to service any sporadics now
-                                 */
-                                intRegVal &= ~dispatchQInfo[i].intRegCheckMask;
-#ifndef NDEBUG
-                                /* Update statistics */
-                                dispatcherStats.queueStats[i].disableCount++;
-#endif
-                            }
-                        }
-                    }
-
-                    currDispatchQInfo->callback (qIndex,
-                                                 currDispatchQInfo->callbackId);
-#ifndef NDEBUG
-                    /* Update statistics */
-                    dispatcherStats.queueStats[qIndex].callbackCnt++;
-#endif
-                    /* Clear the interrupt register bit */
-                    intRegVal &= ~intRegCheckMask;
-                }
-            }
-            while(intRegVal);
-        } /*End of intRegVal == currDispatchQInfo->intRegCheckMask */
-    } /* End of intRegVal != 0 */
-
-#ifndef NDEBUG
-    /* Update statistics */
-    dispatcherStats.loopRunCnt++;
-#endif
-
-    if ((intRegValCopy != 0) && (IX_QMGR_QUELOW_GROUP == group))
-    {
-        /* 
-         * lower groups (therefore sticky) AND at least one enabled interrupt
-         * Write back to clear the interrupt 
-         */
-        ixQMgrAqmIfQInterruptRegWrite (IX_QMGR_QUELOW_GROUP, intRegValCopy);
-    }
-
-    /* Rebuild the priority table if needed */
-    if (rebuildTable)
-    {
-        ixQMgrDispatcherReBuildPriorityTable ();
-    }
-}
-
-PRIVATE void
-ixQMgrDispatcherReBuildPriorityTable (void)
-{
-    UINT32 qIndex;
-    UINT32 priority;
-    int lowQuePriorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX;
-    int uppQuePriorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX;
-
-    /* Reset the rebuild flag */
-    rebuildTable = false;
-
-    /* initialize the mak used to identify the queues in the first half
-     * of the priority table
-     */
-    lowPriorityTableFirstHalfMask = 0;
-    uppPriorityTableFirstHalfMask = 0;
-    
-    /* For each priority level */
-    for(priority=0; priority<IX_QMGR_NUM_PRIORITY_LEVELS; priority++)
-    {
-	/* Foreach low queue in this priority */
-	for(qIndex=0; qIndex<IX_QMGR_MIN_QUEUPP_QID; qIndex++)
-	{
-	    if (dispatchQInfo[qIndex].priority == priority)
-	    { 
-		/* build the priority table bitmask which match the
-		 * queues of the first half of the priority table 
-		 */
-		if (lowQuePriorityTableIndex < IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX) 
-		{
-		    lowPriorityTableFirstHalfMask |= dispatchQInfo[qIndex].intRegCheckMask;
-		}
-		/* build the priority table */
-		priorityTable[lowQuePriorityTableIndex++] = qIndex;
-	    }
-	}
-	/* Foreach upp queue */
-	for(qIndex=IX_QMGR_MIN_QUEUPP_QID; qIndex<=IX_QMGR_MAX_QID; qIndex++)
-	{
-	    if (dispatchQInfo[qIndex].priority == priority)
-	    {
-		/* build the priority table bitmask which match the
-		 * queues of the first half of the priority table 
-		 */
-		if (uppQuePriorityTableIndex < IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX) 
-		{
-		    uppPriorityTableFirstHalfMask |= dispatchQInfo[qIndex].intRegCheckMask;
-		}
-		/* build the priority table */
-		priorityTable[uppQuePriorityTableIndex++] = qIndex;
-	    }
-	}
-    }
-}
-
-IxQMgrDispatcherStats*
-ixQMgrDispatcherStatsGet (void)
-{
-    return &dispatcherStats;
-}
-
-PRIVATE void
-dummyCallback (IxQMgrQId qId,
-	       IxQMgrCallbackId cbId)
-{
-    /* Throttle the trace message */
-    if ((dispatchQInfo[qId].dummyCallbackCount % LOG_THROTTLE_COUNT) == 0)
-    {
-	IX_QMGR_LOG_WARNING2("--> dummyCallback: qId (%d), callbackId (%d)\n",qId,cbId);
-    }
-    dispatchQInfo[qId].dummyCallbackCount++;
-
-#ifndef NDEBUG
-    /* Update statistcs */
-    dispatcherStats.queueStats[qId].intNoCallbackCnt++;
-#endif
-}
-void
-ixQMgrLLPShow (int resetStats)
-{
-#ifndef NDEBUG
-    UINT8 i = 0;
-    UINT32 intEnableRegVal = 0;
-
-    printf ("Livelock statistics are printed on the fly.\n");
-    printf ("qId Type     EnableCnt DisableCnt IntEnableState Callbacks\n");
-    printf ("=== ======== ========= ========== ============== =========\n");
-
-    for (i=0; i<= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++)
-    {
-        if (ixQMgrQTypes[i] != IX_QMGR_TYPE_REALTIME_OTHER)
-        {
-            printf (" %2d ", i);
-
-            if (ixQMgrQTypes[i] == IX_QMGR_TYPE_REALTIME_SPORADIC)
-            {
-                printf ("Sporadic");
-            }
-            else
-            {
-                printf ("Periodic");
-            }
-
-           
-            ixQMgrAqmIfQInterruptEnableRegRead (IX_QMGR_QUELOW_GROUP, 
-                                                    &intEnableRegVal);
-            	
-
-	    intEnableRegVal &= dispatchQInfo[i].intRegCheckMask;
-            intEnableRegVal = intEnableRegVal >> i;
-
-            printf (" %10d %10d %10d %10d\n",
-                    dispatcherStats.queueStats[i].enableCount,
-                    dispatcherStats.queueStats[i].disableCount,
-                    intEnableRegVal,
-                    dispatcherStats.queueStats[i].callbackCnt);
-
-            if (resetStats)
-            {
-                dispatcherStats.queueStats[i].enableCount =
-                dispatcherStats.queueStats[i].disableCount = 
-                dispatcherStats.queueStats[i].callbackCnt = 0;
-            }
-        }
-    }
-#else
-    IX_QMGR_LOG0("Livelock Prevention statistics are only collected in debug mode\n");
-#endif
-}
-
-void
-ixQMgrPeriodicDone (void)
-{
-    UINT32 i = 0;
-    UINT32 ixQMgrLockKey = 0;
-
-    /* 
-     * for the lower queues
-     */
-    for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++)
-    {
-        /*
-         * check for sporadics 
-         */
-        if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrQTypes[i])
-        {
-             /* 
-              * enable any sporadics 
-              */
-             ixQMgrLockKey = ixOsalIrqLock();
-             ixQMgrAqmIfQInterruptEnable(i);
-             ixOsalIrqUnlock(ixQMgrLockKey);
-#ifndef NDEBUG
-             /* 
-              * Update statistics 
-              */
-             dispatcherStats.queueStats[i].enableCount++;
-             dispatcherStats.queueStats[i].notificationEnabled = true;
-#endif
-        }
-    }
-}
-IX_STATUS
-ixQMgrCallbackTypeSet (IxQMgrQId qId, 
-                       IxQMgrType type)
-{
-    UINT32 ixQMgrLockKey = 0;
-    IxQMgrType ixQMgrOldType =0;
-
-#ifndef NDEBUG
-    if (!ixQMgrQIsConfigured(qId))
-    {
-        return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-    if (qId >= IX_QMGR_MIN_QUEUPP_QID)
-    {
-        return IX_QMGR_PARAMETER_ERROR;
-    }
-    if(!IX_QMGR_DISPATCHER_CALLBACK_TYPE_CHECK(type))
-    {
-        return IX_QMGR_PARAMETER_ERROR;
-    }
-#endif
-
-    ixQMgrOldType = ixQMgrQTypes[qId];
-    ixQMgrQTypes[qId] = type;
-
-    /*
-     * check if Q has been changed from type SPORADIC
-     */
-    if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrOldType)
-    {
-       /* 
-        * previously Q was a SPORADIC, this means that LLP
-        * might have had it disabled. enable it now.
-        */
-       ixQMgrLockKey = ixOsalIrqLock();
-       ixQMgrAqmIfQInterruptEnable(qId);
-       ixOsalIrqUnlock(ixQMgrLockKey);
-
-#ifndef NDEBUG
-       /* 
-        * Update statistics 
-        */
-       dispatcherStats.queueStats[qId].enableCount++;
-#endif
-    }
-
-    return IX_SUCCESS;
-}
-
-IX_STATUS
-ixQMgrCallbackTypeGet (IxQMgrQId qId, 
-                       IxQMgrType *type)
-{
-#ifndef NDEBUG
-    if (!ixQMgrQIsConfigured(qId))
-    {
-        return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-    if (qId >= IX_QMGR_MIN_QUEUPP_QID)
-    {
-        return IX_QMGR_PARAMETER_ERROR;
-    }
-    if(type == NULL)
-    {
-         return IX_QMGR_PARAMETER_ERROR;
-    }
-#endif
-
-    *type = ixQMgrQTypes[qId];
-    return IX_SUCCESS;
-}
diff --git a/drivers/net/npe/IxQMgrInit.c b/drivers/net/npe/IxQMgrInit.c
deleted file mode 100644
index 14687e6..0000000
--- a/drivers/net/npe/IxQMgrInit.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/**
- * @file    IxQMgrInit.c
- *
- * @author Intel Corporation
- * @date    30-Oct-2001
- *
- * @brief:  Provided initialization of the QMgr component and its subcomponents.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * System defined include files.
- */
-
-/*
- * User defined include files.
- */
-#include "IxOsal.h"
-#include "IxQMgr.h"
-#include "IxQMgrQCfg_p.h"
-#include "IxQMgrDispatcher_p.h"
-#include "IxQMgrLog_p.h"
-#include "IxQMgrQAccess_p.h"
-#include "IxQMgrDefines_p.h"
-#include "IxQMgrAqmIf_p.h"
-
-/*
- * Set to true if initialized
- * N.B. global so integration/unit tests can reinitialize
- */
-BOOL qMgrIsInitialized = false;
-
-/*
- * Function definitions.
- */
-IX_STATUS
-ixQMgrInit (void)
-{
-    if (qMgrIsInitialized)
-    {
-	IX_QMGR_LOG0("ixQMgrInit: IxQMgr already initialised\n");
-	return IX_FAIL;
-    }
-
-    /* Initialise the QCfg component */
-    ixQMgrQCfgInit ();
-
-    /* Initialise the Dispatcher component */
-    ixQMgrDispatcherInit ();
-
-    /* Initialise the Access component */
-    ixQMgrQAccessInit ();
-
-    /* Initialization complete */
-    qMgrIsInitialized = true;
-
-    return IX_SUCCESS;
-}
-
-IX_STATUS
-ixQMgrUnload (void)
-{
-    if (!qMgrIsInitialized)
-    {
-	return IX_FAIL;
-    }
-
-    /* Uninitialise the QCfg component */
-    ixQMgrQCfgUninit ();
-
-    /* Uninitialization complete */
-    qMgrIsInitialized = false;
-
-    return IX_SUCCESS;
-}
-
-void
-ixQMgrShow (void)
-{
-    IxQMgrQCfgStats *qCfgStats = NULL;
-    IxQMgrDispatcherStats *dispatcherStats = NULL;
-    int i;
-    UINT32 lowIntRegRead, upIntRegRead;
-
-    qCfgStats = ixQMgrQCfgStatsGet ();
-    dispatcherStats = ixQMgrDispatcherStatsGet ();
-    ixQMgrAqmIfQInterruptRegRead (IX_QMGR_QUELOW_GROUP, &lowIntRegRead);
-    ixQMgrAqmIfQInterruptRegRead (IX_QMGR_QUEUPP_GROUP, &upIntRegRead);
-    printf("Generic Stats........\n");
-    printf("=====================\n");
-    printf("Loop Run Count..........%u\n",dispatcherStats->loopRunCnt);
-    printf("Watermark set count.....%d\n", qCfgStats->wmSetCnt);
-    printf("===========================================\n");
-    printf("On the fly Interrupt Register Stats........\n");
-    printf("===========================================\n");
-    printf("Lower Interrupt Register............0x%08x\n",lowIntRegRead);
-    printf("Upper Interrupt Register............0x%08x\n",upIntRegRead);
-    printf("==============================================\n");
-    printf("Queue Specific Stats........\n");
-    printf("============================\n");
-
-    for (i=0; i<IX_QMGR_MAX_NUM_QUEUES; i++)
-    {
-	if (ixQMgrQIsConfigured(i))
-	{
-	    ixQMgrQShow(i);
-	}
-    }
-
-    printf("============================\n");
-}
-
-IX_STATUS
-ixQMgrQShow (IxQMgrQId qId)
-{
-    IxQMgrQCfgStats *qCfgStats = NULL;
-    IxQMgrDispatcherStats *dispatcherStats = NULL; 
-
-    if (!ixQMgrQIsConfigured(qId))
-    {
-	return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-    
-    dispatcherStats = ixQMgrDispatcherStatsGet ();
-    qCfgStats = ixQMgrQCfgQStatsGet (qId);
-
-    printf("QId %d\n", qId);
-    printf("======\n");
-    printf("  IxQMgrQCfg Stats\n");
-    printf("    Name..................... \"%s\"\n", qCfgStats->qStats[qId].qName);
-    printf("    Size in words............ %u\n", qCfgStats->qStats[qId].qSizeInWords);
-    printf("    Entry size in words...... %u\n", qCfgStats->qStats[qId].qEntrySizeInWords);
-    printf("    Nearly empty watermark... %u\n", qCfgStats->qStats[qId].ne);
-    printf("    Nearly full watermark.... %u\n", qCfgStats->qStats[qId].nf);
-    printf("    Number of full entries... %u\n", qCfgStats->qStats[qId].numEntries);
-    printf("    Sram base address........ 0x%X\n", qCfgStats->qStats[qId].baseAddress);
-    printf("    Read pointer............. 0x%X\n", qCfgStats->qStats[qId].readPtr);
-    printf("    Write pointer............ 0x%X\n", qCfgStats->qStats[qId].writePtr);
-
-#ifndef NDEBUG
-    if (dispatcherStats->queueStats[qId].notificationEnabled)
-    {
-        char *localEvent = "none ????";
-        switch (dispatcherStats->queueStats[qId].srcSel)
-        {
-            case IX_QMGR_Q_SOURCE_ID_E:
-                localEvent = "Empty";
-                break;
-            case IX_QMGR_Q_SOURCE_ID_NE:
-                localEvent = "Nearly Empty";
-                break;
-            case IX_QMGR_Q_SOURCE_ID_NF:
-                localEvent = "Nearly Full";
-                break;
-            case IX_QMGR_Q_SOURCE_ID_F:
-                localEvent = "Full";
-                break;
-            case IX_QMGR_Q_SOURCE_ID_NOT_E:
-                localEvent = "Not Empty";
-                break;
-            case IX_QMGR_Q_SOURCE_ID_NOT_NE:
-                localEvent = "Not Nearly Empty";
-                break;
-            case IX_QMGR_Q_SOURCE_ID_NOT_NF:
-                localEvent = "Not Nearly Full";
-                break;
-            case IX_QMGR_Q_SOURCE_ID_NOT_F:
-                localEvent = "Not Full";
-                break;
-            default :
-                break;
-        }
-        printf("    Notifications localEvent...... %s\n", localEvent);
-    }
-    else
-    {
-        printf("    Notifications............ not enabled\n");
-    }
-    printf("  IxQMgrDispatcher Stats\n");
-    printf("    Callback count................%d\n",
-	  dispatcherStats->queueStats[qId].callbackCnt);
-    printf("    Priority change count.........%d\n",
-	  dispatcherStats->queueStats[qId].priorityChangeCnt);
-    printf("    Interrupt no callback count...%d\n",
-	  dispatcherStats->queueStats[qId].intNoCallbackCnt);
-    printf("    Interrupt lost callback count...%d\n",
-	  dispatcherStats->queueStats[qId].intLostCallbackCnt);
-#endif
-
-    return IX_SUCCESS;
-}
-
-
-
-
diff --git a/drivers/net/npe/IxQMgrQAccess.c b/drivers/net/npe/IxQMgrQAccess.c
deleted file mode 100644
index 13ee0f4..0000000
--- a/drivers/net/npe/IxQMgrQAccess.c
+++ /dev/null
@@ -1,772 +0,0 @@
-/**
- * @file    IxQMgrQAccess.c
- *
- * @author Intel Corporation
- * @date    30-Oct-2001
- *
- * @brief   This file contains functions for putting entries on a queue and
- * removing entries from a queue.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * Inlines are compiled as function when this is defined.
- * N.B. Must be placed before #include of "IxQMgr.h"
- */
-#ifndef IXQMGR_H
-#    define IXQMGRQACCESS_C
-#else
-#    error
-#endif
-
-/*
- * System defined include files.
- */
-
-/*
- * User defined include files.
- */
-#include "IxQMgr.h"
-#include "IxQMgrAqmIf_p.h"
-#include "IxQMgrQAccess_p.h"
-#include "IxQMgrQCfg_p.h"
-#include "IxQMgrDefines_p.h"
-
-/*
- * Global variables and extern definitions
- */
-extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[];
-
-/*
- * Function definitions.
- */
-void
-ixQMgrQAccessInit (void)
-{   
-}
-
-IX_STATUS
-ixQMgrQReadWithChecks (IxQMgrQId qId,
-                       UINT32 *entry)
-{
-    IxQMgrQEntrySizeInWords entrySizeInWords;
-    IxQMgrQInlinedReadWriteInfo *infoPtr;
-
-    if (NULL == entry)
-    {
-	return IX_QMGR_PARAMETER_ERROR;
-    }
-
-    /* Check QId */
-    if (!ixQMgrQIsConfigured(qId))
-    {
-	return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-
-    /* Get the q entry size in words */
-    entrySizeInWords = ixQMgrQEntrySizeInWordsGet (qId);
-
-    ixQMgrAqmIfQPop (qId, entrySizeInWords, entry);	    
-
-    /* reset the current read count if the counter wrapped around 
-    * (unsigned arithmetic)
-    */
-    infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    if (infoPtr->qReadCount-- > infoPtr->qSizeInEntries)
-    {
-	infoPtr->qReadCount = 0;
-    }
-
-    /* Check if underflow occurred on the read */
-    if (ixQMgrAqmIfUnderflowCheck (qId))
-    {
-	return IX_QMGR_Q_UNDERFLOW;
-    }
-    
-    return IX_SUCCESS;
-}
-
-/* this function reads the remaining of the q entry
- * for queues configured with many words.
- * (the first word of the entry is already read 
- * in the inlined function and the entry pointer already
- * incremented
- */
-IX_STATUS
-ixQMgrQReadMWordsMinus1 (IxQMgrQId qId,
-			 UINT32 *entry)
-{
-    IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    UINT32 entrySize = infoPtr->qEntrySizeInWords;
-    volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr;
-    
-    while (--entrySize)
-    {
-	/* read the entry and accumulate the result */
-	*(++entry) = IX_OSAL_READ_LONG(++qAccRegAddr);
-    }
-    /* underflow is available for lower queues only */
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-	/* get the queue status */
-	UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr);
-	
-	/* check the underflow status */
-	if (status & infoPtr->qUflowStatBitMask)
-	{
-	    /* the queue is empty 
-	     *  clear the underflow status bit if it was set 
-	     */
-	    IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr,
-				 status & ~infoPtr->qUflowStatBitMask);
-	    return IX_QMGR_Q_UNDERFLOW;
-	}
-    }
-    return IX_SUCCESS;
-}
-
-IX_STATUS
-ixQMgrQWriteWithChecks (IxQMgrQId qId,
-                        UINT32 *entry)
-{
-    IxQMgrQEntrySizeInWords entrySizeInWords;
-    IxQMgrQInlinedReadWriteInfo *infoPtr;
-
-    if (NULL == entry)
-    {
-	return IX_QMGR_PARAMETER_ERROR;
-    }
-
-    /* Check QId */
-    if (!ixQMgrQIsConfigured(qId))
-    {
-	return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-
-    /* Get the q entry size in words */
-    entrySizeInWords = ixQMgrQEntrySizeInWordsGet (qId);
-    
-    ixQMgrAqmIfQPush (qId, entrySizeInWords, entry);
-
-    /* reset the current read count if the counter wrapped around 
-    * (unsigned arithmetic)
-    */
-    infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    if (infoPtr->qWriteCount++ >= infoPtr->qSizeInEntries)
-    {
-	infoPtr->qWriteCount = infoPtr->qSizeInEntries;
-    }
-
-    /* Check if overflow occurred on the write*/
-    if (ixQMgrAqmIfOverflowCheck (qId))
-    {
-	return IX_QMGR_Q_OVERFLOW;
-    }
-         
-    return IX_SUCCESS;
-}
-
-IX_STATUS
-ixQMgrQPeek (IxQMgrQId qId,
-	     unsigned int entryIndex,
-	     UINT32 *entry)
-{
-    unsigned int numEntries;
-
-#ifndef NDEBUG
-    if ((NULL == entry) || (entryIndex >= IX_QMGR_Q_SIZE_INVALID))
-    {
-	return IX_QMGR_PARAMETER_ERROR;
-    }
-
-    if (!ixQMgrQIsConfigured(qId))
-    {
-	return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-#endif
-    
-    if (IX_SUCCESS != ixQMgrQNumEntriesGet (qId, &numEntries))
-    {
-	return IX_FAIL;
-    }
-
-    if (entryIndex >= numEntries) /* entryIndex starts at 0 */
-    {
-	return IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS;
-    }
-
-    return ixQMgrAqmIfQPeek (qId, entryIndex, entry);
-}
-
-IX_STATUS
-ixQMgrQPoke (IxQMgrQId qId,
-	     unsigned entryIndex,
-	     UINT32 *entry)
-{
-    unsigned int numEntries;
-
-#ifndef NDEBUG
-    if ((NULL == entry) || (entryIndex > 128))
-    {
-	return IX_QMGR_PARAMETER_ERROR;
-    }
-
-    if (!ixQMgrQIsConfigured(qId))
-    {
-	return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-#endif
-        
-    if (IX_SUCCESS != ixQMgrQNumEntriesGet (qId, &numEntries))
-    {
-	return IX_FAIL;
-    }
-
-    if (numEntries < (entryIndex + 1)) /* entryIndex starts at 0 */
-    {
-	return IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS;
-    }
-
-    return ixQMgrAqmIfQPoke (qId, entryIndex, entry);
-}
-
-IX_STATUS
-ixQMgrQStatusGetWithChecks (IxQMgrQId qId,
-                            IxQMgrQStatus *qStatus)
-{
-    if (NULL == qStatus)
-    {
-	return IX_QMGR_PARAMETER_ERROR;
-    }
-   
-    if (!ixQMgrQIsConfigured (qId)) 
-    {
-        return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-
-    ixQMgrAqmIfQueStatRead (qId, qStatus);
-
-    return IX_SUCCESS;
-}
-
-IX_STATUS
-ixQMgrQNumEntriesGet (IxQMgrQId qId,
-		      unsigned *numEntriesPtr)
-{
-    UINT32 qPtrs;
-    UINT32 qStatus;
-    unsigned numEntries;
-    IxQMgrQInlinedReadWriteInfo *infoPtr;
-
-
-#ifndef NDEBUG
-    if (NULL == numEntriesPtr)
-    {
-	return IX_QMGR_PARAMETER_ERROR;
-    }
-
-    /* Check QId */
-    if (!ixQMgrQIsConfigured(qId))
-    {
-	return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-#endif
-
-    /* get fast access data */
-    infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-
-    /* get snapshot */
-    qPtrs = IX_OSAL_READ_LONG(infoPtr->qConfigRegAddr);
-
-    /* Mod subtraction of pointers to get number of words in Q. */
-    numEntries = (qPtrs - (qPtrs >> 7)) & 0x7f;
-  
-    if (numEntries == 0)
-    {
-	/* 
-	 * Could mean either full or empty queue
-	 * so look at status
-	 */
-	ixQMgrAqmIfQueStatRead (qId, &qStatus);
-
-	if (qId < IX_QMGR_MIN_QUEUPP_QID)
-	{
-	    if (qStatus & IX_QMGR_Q_STATUS_E_BIT_MASK)
-	    {
-		/* Empty */
-		*numEntriesPtr = 0;
-	    }
-	    else if (qStatus & IX_QMGR_Q_STATUS_F_BIT_MASK)
-	    {
-		/* Full */
-		*numEntriesPtr = infoPtr->qSizeInEntries;
-	    }
-	    else
-	    {	    
-		/* 
-		 * Queue status and read/write pointers are volatile.
-		 * The queue state has changed since we took the
-		 * snapshot of the read and write pointers.
-		 * Client can retry if they wish
-		 */
-		*numEntriesPtr = 0;
-		return IX_QMGR_WARNING;
-	    }
-	}
-	else /* It is an upper queue which does not have an empty status bit maintained */
-	{
-	    if (qStatus & IX_QMGR_Q_STATUS_F_BIT_MASK)
-	    {
-		/* The queue is Full at the time of snapshot. */
-		*numEntriesPtr = infoPtr->qSizeInEntries;
-	    }
-	    else
-	    {
-	       /* The queue is either empty, either moving,
-	        * Client can retry if they wish
-	        */
-		*numEntriesPtr = 0;
-	        return IX_QMGR_WARNING;
-	    }
-	}
-    }
-    else
-    {
-	*numEntriesPtr = (numEntries / infoPtr->qEntrySizeInWords) & (infoPtr->qSizeInEntries - 1);
-    }
-    
-    return IX_SUCCESS;
-}
-
-#if defined(__wince) && defined(NO_INLINE_APIS)
-
-PUBLIC IX_STATUS
-ixQMgrQRead (IxQMgrQId qId,
-      UINT32 *entryPtr)
-{
-    extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[];
-    IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    UINT32 entry, entrySize;
-
-    /* get a new entry */
-    entrySize = infoPtr->qEntrySizeInWords;
-    entry = IX_OSAL_READ_LONG(infoPtr->qAccRegAddr);
-
-    if (entrySize != IX_QMGR_Q_ENTRY_SIZE1)
-    { 
-    *entryPtr = entry;
-  /* process the remaining part of the entry */
-   return ixQMgrQReadMWordsMinus1(qId, entryPtr);
-    }
-
-    /* underflow is available for lower queues only */
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
- /* the counter of queue entries is decremented. In happy 
-    * day scenario there are many entries in the queue
-  * and the counter does not reach zero.
-  */
-     if (infoPtr->qReadCount-- == 0)
- {
-       /* There is maybe no entry in the queue
-      * qReadCount is now negative, but will be corrected before
-      * the function returns.
-         */
-     UINT32 qPtrs; /* queue internal pointers */
-
-     /* when a queue is empty, the hw guarantees to return 
-       * a null value. If the value is not null, the queue is
-      * not empty.
-        */
-     if (entry == 0)
-     {
-       /* get the queue status */
-      UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr);
-   
-        /* check the underflow status */
-        if (status & infoPtr->qUflowStatBitMask)
-        {
-           /* the queue is empty 
-          *  clear the underflow status bit if it was set 
-            */
-          IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr,
-                    status & ~infoPtr->qUflowStatBitMask);
-         *entryPtr = 0;
-          infoPtr->qReadCount = 0;
-            return IX_QMGR_Q_UNDERFLOW;
-     }
-       }
-       /* store the result */
-      *entryPtr = entry;
-
-      /* No underflow occured : someone is filling the queue
-       * or the queue contains null entries.
-       * The current counter needs to be
-       * updated from the current number of entries in the queue
-       */
-
-     /* get snapshot of queue pointers */
-        qPtrs = IX_OSAL_READ_LONG(infoPtr->qConfigRegAddr);
-
-       /* Mod subtraction of pointers to get number of words in Q. */
-      qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; 
-  
-       if (qPtrs == 0)
-     {
-       /* no entry in the queue */
-     infoPtr->qReadCount = 0;
-        }
-       else
-        {
-       /* convert the number of words inside the queue
-      * to a number of entries 
-       */
-     infoPtr->qReadCount = qPtrs & (infoPtr->qSizeInEntries - 1);
-        }
-       return IX_SUCCESS;
-  }
-    }
-    *entryPtr = entry;
-    return IX_SUCCESS;
-}
-
-PUBLIC IX_STATUS
-ixQMgrQBurstRead (IxQMgrQId qId,
-          UINT32 numEntries,
-          UINT32 *entries)
-{
-    extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[];
-    IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    UINT32 nullCheckEntry;
-
-    if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1)
-    {
-    volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr;
-
-    /* the code is optimized to take care of data dependencies:
-  * Durig a read, there are a few cycles needed to get the 
-   * read complete. During these cycles, it is poossible to
-    * do some CPU, e.g. increment pointers and decrement 
-   * counters.
-     */
-
- /* fetch a queue entry */
-   nullCheckEntry = IX_OSAL_READ_LONG(infoPtr->qAccRegAddr);
-
- /* iterate the specified number of queue entries */ 
-    while (--numEntries)
-    {
-       /* check the result of the previous read */
-     if (nullCheckEntry == 0)
-        {
-       /* if we read a NULL entry, stop. We have underflowed */
-        break;
-      }
-       else
-        {
-       /* write the entry */
-       *entries = nullCheckEntry;
-      /* fetch next entry */
-      nullCheckEntry = IX_OSAL_READ_LONG(qAccRegAddr);
-      /* increment the write address */
-       entries++;
-      }
-   }
-   /* write the pre-fetched entry */
-   *entries = nullCheckEntry;
-    }
-    else
-    {
-    IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords;
-  /* read the specified number of queue entries */
-    nullCheckEntry = 0;
- while (numEntries--)
-    {
-       int i;
-
-      for (i = 0; i < entrySizeInWords; i++)
-      {
-       *entries = IX_OSAL_READ_LONG(infoPtr->qAccRegAddr + i);
-       nullCheckEntry |= *entries++;
-       }
-
-       /* if we read a NULL entry, stop. We have underflowed */
-        if (nullCheckEntry == 0)
-        {
-       break;
-      }
-       nullCheckEntry = 0;
- }
-    }
-
-    /* reset the current read count : next access to the read function 
-     * will force a underflow status check 
-     */
-    infoPtr->qWriteCount = 0;
-
-    /* Check if underflow occurred on the read */
-    if (nullCheckEntry == 0 && qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-  /* get the queue status */
-  UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr);
-
-   if (status & infoPtr->qUflowStatBitMask)
-    {
-       /* clear the underflow status bit if it was set */
-      IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr,
-                status & ~infoPtr->qUflowStatBitMask);
-     return IX_QMGR_Q_UNDERFLOW;
- }
-    }
-
-    return IX_SUCCESS;
-}
-
-PUBLIC IX_STATUS
-ixQMgrQWrite (IxQMgrQId qId,
-         UINT32 *entry)
-{
-    extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[];
-    IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    UINT32 entrySize;
-
-    /* write the entry */
-    IX_OSAL_WRITE_LONG(infoPtr->qAccRegAddr, *entry);
-    entrySize = infoPtr->qEntrySizeInWords;
-
-    if (entrySize != IX_QMGR_Q_ENTRY_SIZE1)
-    {   
-    /* process the remaining part of the entry */
-   volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr;
-    while (--entrySize)
- {
-       ++entry;
-        IX_OSAL_WRITE_LONG(++qAccRegAddr, *entry);
-    }
-   entrySize = infoPtr->qEntrySizeInWords;
-    }
-
-    /* overflow is available for lower queues only */
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {   
-  UINT32 qSize = infoPtr->qSizeInEntries;
- /* increment the current number of entries in the queue
-  * and check for overflow 
-   */
- if (infoPtr->qWriteCount++ == qSize)
-    {
-       /* the queue may have overflow */
-       UINT32 qPtrs; /* queue internal pointers */
-  
-       /* get the queue status */
-      UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr);
-
-       /* read the status twice because the status may 
-         * not be immediately ready after the write operation
-        */
-     if ((status & infoPtr->qOflowStatBitMask) ||
-        ((status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr))
-         & infoPtr->qOflowStatBitMask))
-     {
-       /* the queue is full, clear the overflow status
-      *  bit if it was set 
-       */
-     IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr,
-                    status & ~infoPtr->qOflowStatBitMask);
-     infoPtr->qWriteCount = infoPtr->qSizeInEntries;
-     return IX_QMGR_Q_OVERFLOW;
-      }
-       /* No overflow occured : someone is draining the queue
-       * and the current counter needs to be
-       * updated from the current number of entries in the queue
-       */
-
-     /* get q pointer snapshot */
-        qPtrs = IX_OSAL_READ_LONG(infoPtr->qConfigRegAddr);
-
-       /* Mod subtraction of pointers to get number of words in Q. */
-      qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; 
-
-     if (qPtrs == 0)
-     {
-       /* the queue may be full at the time of the 
-         * snapshot. Next access will check 
-         * the overflow status again.
-        */
-     infoPtr->qWriteCount = qSize;
-       }
-       else 
-       {
-       /* convert the number of words to a number of entries */
-        if (entrySize == IX_QMGR_Q_ENTRY_SIZE1)
-     {
-           infoPtr->qWriteCount = qPtrs & (qSize - 1);
-     }
-       else
-        {
-           infoPtr->qWriteCount = (qPtrs / entrySize) & (qSize - 1);
-       }
-       }
-   }
-    }
-    return IX_SUCCESS;
-}
-
-PUBLIC IX_STATUS
-ixQMgrQBurstWrite (IxQMgrQId qId,
-          unsigned numEntries,
-        UINT32 *entries)
-{
-    extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[];
-    IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    UINT32 status;
-
-    /* update the current write count */
-    infoPtr->qWriteCount += numEntries;
-
-    if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1)
-    {
-    volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr;
-    while (numEntries--)
-    {
-       IX_OSAL_WRITE_LONG(qAccRegAddr, *entries);
-        entries++;
-  }
-    }
-    else
-    {
- IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords;
-  int i;
-
-  /* write each queue entry */
-    while (numEntries--)
-    {
-       /* write the queueEntrySize number of words for each entry */
-       for (i = 0; i < entrySizeInWords; i++)
-      {
-       IX_OSAL_WRITE_LONG((infoPtr->qAccRegAddr + i), *entries);
-     entries++;
-      }
-   }
-    }
-
-    /* check if the write count overflows */
-    if (infoPtr->qWriteCount > infoPtr->qSizeInEntries)
-    {
-  /* reset the current write count */
- infoPtr->qWriteCount = infoPtr->qSizeInEntries;
-    }
-
-    /* Check if overflow occurred on the write operation */
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-   /* get the queue status */
-  status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr);
-
-  /* read the status twice because the status may 
-     * not be ready at the time of the write
-     */
- if ((status & infoPtr->qOflowStatBitMask) ||
-        ((status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr))
-         & infoPtr->qOflowStatBitMask))
- {
-       /* clear the underflow status bit if it was set */
-      IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr,
-                status & ~infoPtr->qOflowStatBitMask);
-     return IX_QMGR_Q_OVERFLOW;
-  }
-    }
-
-    return IX_SUCCESS;
-}
-
-PUBLIC IX_STATUS
-ixQMgrQStatusGet (IxQMgrQId qId,
-          IxQMgrQStatus *qStatus)
-{
-    /* read the status of a queue in the range 0-31 */
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-  extern UINT32 ixQMgrAqmIfQueLowStatRegAddr[];
-   extern UINT32 ixQMgrAqmIfQueLowStatBitsOffset[];
-    extern UINT32 ixQMgrAqmIfQueLowStatBitsMask;
-    extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[];
-    IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-   volatile UINT32 *lowStatRegAddr = (UINT32*)ixQMgrAqmIfQueLowStatRegAddr[qId];
-   volatile UINT32 *qUOStatRegAddr = infoPtr->qUOStatRegAddr;
-
-  UINT32 lowStatBitsOffset = ixQMgrAqmIfQueLowStatBitsOffset[qId];
-    UINT32 lowStatBitsMask   = ixQMgrAqmIfQueLowStatBitsMask;
-   UINT32 underflowBitMask  = infoPtr->qUflowStatBitMask;
-  UINT32 overflowBitMask   = infoPtr->qOflowStatBitMask;
-
-  /* read the status register for this queue */
-   *qStatus = IX_OSAL_READ_LONG(lowStatRegAddr);
- /* mask out the status bits relevant only to this queue */
-  *qStatus = (*qStatus >> lowStatBitsOffset) & lowStatBitsMask;
-
-   /* Check if the queue has overflowed */
- if (IX_OSAL_READ_LONG(qUOStatRegAddr) & overflowBitMask)
-  {
-       /* clear the overflow status bit if it was set */
-       IX_OSAL_WRITE_LONG(qUOStatRegAddr,
-                 (IX_OSAL_READ_LONG(qUOStatRegAddr) &
-               ~overflowBitMask));
-       *qStatus |= IX_QMGR_Q_STATUS_OF_BIT_MASK;
-   }
-
-   /* Check if the queue has underflowed */
-        if (IX_OSAL_READ_LONG(qUOStatRegAddr) & underflowBitMask)
- {
-       /* clear the underflow status bit if it was set */
-      IX_OSAL_WRITE_LONG(qUOStatRegAddr,
-                 (IX_OSAL_READ_LONG(qUOStatRegAddr) &
-               ~underflowBitMask));
-      *qStatus |= IX_QMGR_Q_STATUS_UF_BIT_MASK;
-   }
-    }
-    else /* read status of a queue in the range 32-63 */
-    {
- extern UINT32 ixQMgrAqmIfQueUppStat0RegAddr;
-    extern UINT32 ixQMgrAqmIfQueUppStat1RegAddr;
-    extern UINT32 ixQMgrAqmIfQueUppStat0BitMask[];
-  extern UINT32 ixQMgrAqmIfQueUppStat1BitMask[];
-
-  volatile UINT32 *qNearEmptyStatRegAddr = (UINT32*)ixQMgrAqmIfQueUppStat0RegAddr;
-    volatile UINT32 *qFullStatRegAddr      = (UINT32*)ixQMgrAqmIfQueUppStat1RegAddr;
-    int maskIndex = qId - IX_QMGR_MIN_QUEUPP_QID;
-   UINT32 qNearEmptyStatBitMask = ixQMgrAqmIfQueUppStat0BitMask[maskIndex];
-    UINT32 qFullStatBitMask      = ixQMgrAqmIfQueUppStat1BitMask[maskIndex];
-
-    /* Reset the status bits */
- *qStatus = 0;
-
-   /* Check if the queue is nearly empty */
-    if (IX_OSAL_READ_LONG(qNearEmptyStatRegAddr) & qNearEmptyStatBitMask)
- {
-       *qStatus |= IX_QMGR_Q_STATUS_NE_BIT_MASK;
-   }
-
-   /* Check if the queue is full */
-    if (IX_OSAL_READ_LONG(qFullStatRegAddr) & qFullStatBitMask)
-   {
-       *qStatus |= IX_QMGR_Q_STATUS_F_BIT_MASK;
-    }
-    }
-    return IX_SUCCESS;
-}
-#endif /* def NO_INLINE_APIS */
diff --git a/drivers/net/npe/IxQMgrQCfg.c b/drivers/net/npe/IxQMgrQCfg.c
deleted file mode 100644
index b64bb2d..0000000
--- a/drivers/net/npe/IxQMgrQCfg.c
+++ /dev/null
@@ -1,519 +0,0 @@
-/**
- * @file    QMgrQCfg.c
- *
- * @author Intel Corporation
- * @date    30-Oct-2001
- * 
- * @brief   This modules provides an interface for setting up the static
- * configuration of AQM queues.This file contains the following
- * functions:
- *
- * 
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/*
- * System defined include files.
- */
-
-/*
- * User defined include files.
- */
-#include "IxOsal.h"
-#include "IxQMgr.h"
-#include "IxQMgrAqmIf_p.h"
-#include "IxQMgrQCfg_p.h"
-#include "IxQMgrDefines_p.h"
-
-/*
- * #defines and macros used in this file.
- */
-
-#define IX_QMGR_MIN_ENTRY_SIZE_IN_WORDS 16
-
-/* Total size of SRAM */
-#define IX_QMGR_AQM_SRAM_SIZE_IN_BYTES 0x4000
-
-/*
- * Check that qId is a valid queue identifier. This is provided to
- * make the code easier to read.
- */
-#define IX_QMGR_QID_IS_VALID(qId) \
-(((qId) >= (IX_QMGR_MIN_QID)) && ((qId) <= (IX_QMGR_MAX_QID)))
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/*
- * This struct describes an AQM queue.
- * N.b. bufferSizeInWords and qEntrySizeInWords are stored in the queue
- * as these are requested by Access in the data path. sizeInEntries is
- * not required by the data path so it can be calculated dynamically.
- * 
- */
-typedef struct
-{
-    char qName[IX_QMGR_MAX_QNAME_LEN+1];       /* Textual description of a queue*/
-    IxQMgrQSizeInWords qSizeInWords;           /* The number of words in the queue */
-    IxQMgrQEntrySizeInWords qEntrySizeInWords; /* Number of words per queue entry*/
-    BOOL isConfigured;                         /* This flag is true if the queue has
-                                                *   been configured
-                                                */
-} IxQMgrCfgQ;
-
-/*
- * Variable declarations global to this file. Externs are followed by
- * statics.
- */
-
-extern UINT32 * ixQMgrAqmIfQueAccRegAddr[]; 
-
-/* Store data required to inline read and write access
- */
-IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[IX_QMGR_MAX_NUM_QUEUES];
-
-static IxQMgrCfgQ cfgQueueInfo[IX_QMGR_MAX_NUM_QUEUES];
-
-/* This pointer holds the starting address of AQM SRAM not used by
- * the AQM queues.
- */
-static UINT32 freeSramAddress=0;
-
-/* 4 words of zeroed memory for inline access */
-static UINT32 zeroedPlaceHolder[4] = { 0, 0, 0, 0 };
-
-static BOOL cfgInitialized = false;
-
-static IxOsalMutex ixQMgrQCfgMutex;
-
-/*
- * Statistics
- */
-static IxQMgrQCfgStats stats;
-
-/*
- * Function declarations
- */
-PRIVATE BOOL
-watermarkLevelIsOk (IxQMgrQId qId, IxQMgrWMLevel level);
-
-PRIVATE BOOL
-qSizeInWordsIsOk (IxQMgrQSizeInWords qSize);
-
-PRIVATE BOOL
-qEntrySizeInWordsIsOk (IxQMgrQEntrySizeInWords entrySize);
-
-/*
- * Function definitions.
- */
-void
-ixQMgrQCfgInit (void)
-{
-    int loopIndex;
-    
-    for (loopIndex=0; loopIndex < IX_QMGR_MAX_NUM_QUEUES;loopIndex++)
-    {
-	/* info for code inlining */
-	ixQMgrAqmIfQueAccRegAddr[loopIndex] = zeroedPlaceHolder;
-
-	/* info for code inlining */
-	ixQMgrQInlinedReadWriteInfo[loopIndex].qReadCount = 0;
-	ixQMgrQInlinedReadWriteInfo[loopIndex].qWriteCount = 0;
-	ixQMgrQInlinedReadWriteInfo[loopIndex].qAccRegAddr = zeroedPlaceHolder;
-	ixQMgrQInlinedReadWriteInfo[loopIndex].qUOStatRegAddr = zeroedPlaceHolder;
-	ixQMgrQInlinedReadWriteInfo[loopIndex].qUflowStatBitMask = 0;
-	ixQMgrQInlinedReadWriteInfo[loopIndex].qOflowStatBitMask = 0;
-	ixQMgrQInlinedReadWriteInfo[loopIndex].qEntrySizeInWords = 0;
-	ixQMgrQInlinedReadWriteInfo[loopIndex].qSizeInEntries = 0;
-	ixQMgrQInlinedReadWriteInfo[loopIndex].qConfigRegAddr = zeroedPlaceHolder;
-   }
-
-    /* Initialise the AqmIf component */
-    ixQMgrAqmIfInit ();
-   
-    /* Reset all queues to have queue name = NULL, entry size = 0 and
-     * isConfigured = false
-     */
-    for (loopIndex=0; loopIndex < IX_QMGR_MAX_NUM_QUEUES;loopIndex++)
-    {
-	strcpy (cfgQueueInfo[loopIndex].qName, "");
-	cfgQueueInfo[loopIndex].qSizeInWords = 0;
-	cfgQueueInfo[loopIndex].qEntrySizeInWords = 0;
-	cfgQueueInfo[loopIndex].isConfigured = false;
-
-	/* Statistics */
-	stats.qStats[loopIndex].isConfigured = false;
-	stats.qStats[loopIndex].qName = cfgQueueInfo[loopIndex].qName;
-    }
-
-    /* Statistics */
-    stats.wmSetCnt = 0;
-
-    ixQMgrAqmIfSramBaseAddressGet (&freeSramAddress);
-    
-    ixOsalMutexInit(&ixQMgrQCfgMutex);
-
-    cfgInitialized = true;
-}
-
-void
-ixQMgrQCfgUninit (void)
-{
-    cfgInitialized = false;
-
-    /* Uninitialise the AqmIf component */
-    ixQMgrAqmIfUninit ();
-}
-
-IX_STATUS
-ixQMgrQConfig (char *qName,
-	      IxQMgrQId qId,
-	      IxQMgrQSizeInWords qSizeInWords,
-	      IxQMgrQEntrySizeInWords qEntrySizeInWords)
-{
-    UINT32 aqmLocalBaseAddress;
-
-    if (!cfgInitialized)
-    {
-        return IX_FAIL;
-    }
-    
-    if (!IX_QMGR_QID_IS_VALID(qId))
-    {
-	return IX_QMGR_INVALID_Q_ID;
-    }
-    
-    else if (NULL == qName)
-    {
-	return IX_QMGR_PARAMETER_ERROR;
-    }
-    
-    else if (strlen (qName) > IX_QMGR_MAX_QNAME_LEN)
-    {
-	return IX_QMGR_PARAMETER_ERROR;
-    }
-
-    else if (!qSizeInWordsIsOk (qSizeInWords))
-    {
-	return IX_QMGR_INVALID_QSIZE;
-    }
-
-    else if (!qEntrySizeInWordsIsOk (qEntrySizeInWords))
-    {
-	return IX_QMGR_INVALID_Q_ENTRY_SIZE;
-    }
-    
-    else if (cfgQueueInfo[qId].isConfigured)
-    {
-	return IX_QMGR_Q_ALREADY_CONFIGURED;
-    }
-   
-    ixOsalMutexLock(&ixQMgrQCfgMutex, IX_OSAL_WAIT_FOREVER);
-
-    /* Write the config register */
-    ixQMgrAqmIfQueCfgWrite (qId,
-			   qSizeInWords,
-			   qEntrySizeInWords,
-			   freeSramAddress);
-
-
-    strcpy (cfgQueueInfo[qId].qName, qName);
-    cfgQueueInfo[qId].qSizeInWords = qSizeInWords;
-    cfgQueueInfo[qId].qEntrySizeInWords = qEntrySizeInWords;
-
-    /* store pre-computed information in the same cache line
-     * to facilitate inlining of QRead and QWrite functions 
-     * in IxQMgr.h
-     */
-    ixQMgrQInlinedReadWriteInfo[qId].qReadCount = 0;
-    ixQMgrQInlinedReadWriteInfo[qId].qWriteCount = 0;
-    ixQMgrQInlinedReadWriteInfo[qId].qEntrySizeInWords = qEntrySizeInWords;
-    ixQMgrQInlinedReadWriteInfo[qId].qSizeInEntries = 
-		(UINT32)qSizeInWords / (UINT32)qEntrySizeInWords;
-
-    /* Calculate the new freeSramAddress from the size of the queue
-     * currently being configured.
-     */
-    freeSramAddress += (qSizeInWords * IX_QMGR_NUM_BYTES_PER_WORD);
-
-    /* Get the virtual SRAM address */
-    ixQMgrAqmIfBaseAddressGet (&aqmLocalBaseAddress);
-
-    IX_OSAL_ASSERT((freeSramAddress - (aqmLocalBaseAddress + (IX_QMGR_QUEBUFFER_SPACE_OFFSET))) <=
-	      IX_QMGR_QUE_BUFFER_SPACE_SIZE);
-
-    /* The queue is now configured */
-    cfgQueueInfo[qId].isConfigured = true;
-
-    ixOsalMutexUnlock(&ixQMgrQCfgMutex);
-
-#ifndef NDEBUG
-    /* Update statistics */
-    stats.qStats[qId].isConfigured = true;
-    stats.qStats[qId].qName = cfgQueueInfo[qId].qName;
-#endif
-    return IX_SUCCESS;
-}
-
-IxQMgrQSizeInWords
-ixQMgrQSizeInWordsGet (IxQMgrQId qId)
-{
-    /* No parameter checking as this is used on the data path */
-    return (cfgQueueInfo[qId].qSizeInWords);
-}
-
-IX_STATUS
-ixQMgrQSizeInEntriesGet (IxQMgrQId qId,
-			 unsigned *qSizeInEntries)
-{
-    if (!ixQMgrQIsConfigured(qId))
-    {
-        return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-
-    if(NULL == qSizeInEntries)
-    {
-        return IX_QMGR_PARAMETER_ERROR;
-    }
-
-    *qSizeInEntries = (UINT32)(cfgQueueInfo[qId].qSizeInWords) /
-        (UINT32)cfgQueueInfo[qId].qEntrySizeInWords;
-
-    return IX_SUCCESS;
-}
-
-IxQMgrQEntrySizeInWords
-ixQMgrQEntrySizeInWordsGet (IxQMgrQId qId)
-{
-    /* No parameter checking as this is used on the data path */
-    return (cfgQueueInfo[qId].qEntrySizeInWords);
-}
-
-IX_STATUS
-ixQMgrWatermarkSet (IxQMgrQId qId,
-		    IxQMgrWMLevel ne,
-		    IxQMgrWMLevel nf)
-{    
-    IxQMgrQStatus qStatusOnEntry;/* The queue status on entry/exit */
-    IxQMgrQStatus qStatusOnExit; /* to this function               */
-
-    if (!ixQMgrQIsConfigured(qId))
-    {
-        return IX_QMGR_Q_NOT_CONFIGURED;
-    }
-
-    if (!watermarkLevelIsOk (qId, ne))
-    {
-	return IX_QMGR_INVALID_Q_WM;
-    }
-
-    if (!watermarkLevelIsOk (qId, nf))
-    {
-	return IX_QMGR_INVALID_Q_WM;
-    }
-
-    /* Get the current queue status */
-    ixQMgrAqmIfQueStatRead (qId, &qStatusOnEntry);
-
-#ifndef NDEBUG
-    /* Update statistics */
-    stats.wmSetCnt++;
-#endif
-
-    ixQMgrAqmIfWatermarkSet (qId,
-			    ne,
-			    nf);
-
-    /* Get the current queue status */
-    ixQMgrAqmIfQueStatRead (qId, &qStatusOnExit);
-  
-    /* If the status has changed return a warning */
-    if (qStatusOnEntry != qStatusOnExit)
-    {
-	return IX_QMGR_WARNING;
-    }
-
-    return IX_SUCCESS;
-}
-
-IX_STATUS
-ixQMgrAvailableSramAddressGet (UINT32 *address,
-			      unsigned *sizeOfFreeRam)
-{
-    UINT32 aqmLocalBaseAddress;
-
-    if ((NULL == address)||(NULL == sizeOfFreeRam)) 
-    {
-	return IX_QMGR_PARAMETER_ERROR;
-    }
-    if (!cfgInitialized)
-    {
-	return IX_FAIL;
-    }
-
-    *address = freeSramAddress;
-
-    /* Get the virtual SRAM address */
-    ixQMgrAqmIfBaseAddressGet (&aqmLocalBaseAddress);
-
-    /* 
-     * Calculate the size in bytes of free sram 
-     * i.e. current free SRAM virtual pointer from
-     *      (base + total size)
-     */
-    *sizeOfFreeRam = 
-	(aqmLocalBaseAddress +
-	IX_QMGR_AQM_SRAM_SIZE_IN_BYTES) -
-	freeSramAddress;
-
-    if (0 == *sizeOfFreeRam)
-    {
-	return IX_QMGR_NO_AVAILABLE_SRAM;
-    }
-
-    return IX_SUCCESS;
-}
-
-BOOL
-ixQMgrQIsConfigured (IxQMgrQId qId)
-{
-    if (!IX_QMGR_QID_IS_VALID(qId))
-    {
-	return false;
-    }
-
-    return cfgQueueInfo[qId].isConfigured;
-}
-
-IxQMgrQCfgStats*
-ixQMgrQCfgStatsGet (void)
-{
-    return &stats;
-}
-
-IxQMgrQCfgStats*
-ixQMgrQCfgQStatsGet (IxQMgrQId qId)
-{
-    unsigned int ne;
-    unsigned int nf;
-    UINT32 baseAddress;
-    UINT32 readPtr;
-    UINT32 writePtr;
-
-    stats.qStats[qId].qSizeInWords = cfgQueueInfo[qId].qSizeInWords;
-    stats.qStats[qId].qEntrySizeInWords = cfgQueueInfo[qId].qEntrySizeInWords;
-    
-    if (IX_SUCCESS != ixQMgrQNumEntriesGet (qId, &stats.qStats[qId].numEntries))
-    {
-        if (IX_QMGR_WARNING != ixQMgrQNumEntriesGet (qId, &stats.qStats[qId].numEntries))
-        {
-	   IX_QMGR_LOG_WARNING1("Failed to get the number of entries in queue.... %d\n", qId);
-        }
-    }
-
-    ixQMgrAqmIfQueCfgRead (qId,
-			   stats.qStats[qId].numEntries,
-			   &baseAddress,
-			   &ne,
-			   &nf,
-			   &readPtr,
-			   &writePtr);
-        
-    stats.qStats[qId].baseAddress = baseAddress;
-    stats.qStats[qId].ne = ne;
-    stats.qStats[qId].nf = nf;
-    stats.qStats[qId].readPtr = readPtr;
-    stats.qStats[qId].writePtr = writePtr;
-
-    return &stats;
-}
-
-/* 
- * Static function definitions
- */
-
-PRIVATE BOOL
-watermarkLevelIsOk (IxQMgrQId qId, IxQMgrWMLevel level)
-{
-    unsigned qSizeInEntries;
-
-    switch (level)
-    {
-	case IX_QMGR_Q_WM_LEVEL0: 
-	case IX_QMGR_Q_WM_LEVEL1: 
-	case IX_QMGR_Q_WM_LEVEL2: 
-	case IX_QMGR_Q_WM_LEVEL4: 
-	case IX_QMGR_Q_WM_LEVEL8: 
-	case IX_QMGR_Q_WM_LEVEL16:
-	case IX_QMGR_Q_WM_LEVEL32:
-	case IX_QMGR_Q_WM_LEVEL64:
-	    break;
-	default:
-	    return false;
-    }
-
-    /* Check watermark is not bigger than the qSizeInEntries */
-    ixQMgrQSizeInEntriesGet(qId, &qSizeInEntries);
-
-    if ((unsigned)level > qSizeInEntries)
-    {
-	return false;
-    }
-
-    return true;
-}
-
-PRIVATE BOOL
-qSizeInWordsIsOk (IxQMgrQSizeInWords qSize)
-{
-    BOOL status;
-
-    switch (qSize)
-    {	
-	case IX_QMGR_Q_SIZE16:
-	case IX_QMGR_Q_SIZE32:
-	case IX_QMGR_Q_SIZE64:
-	case IX_QMGR_Q_SIZE128:
-	    status = true;
-	    break;
-	default:
-	    status = false;
-	    break;
-    }
-
-    return status;
-}
-
-PRIVATE BOOL
-qEntrySizeInWordsIsOk (IxQMgrQEntrySizeInWords entrySize)
-{
-    BOOL status;
-
-    switch (entrySize)
-    {
-	case IX_QMGR_Q_ENTRY_SIZE1:
-	case IX_QMGR_Q_ENTRY_SIZE2:
-	case IX_QMGR_Q_ENTRY_SIZE4:
-	    status = true;
-	    break;
-	default:
-	    status = false;
-	    break;
-    }
-
-    return status;
-}
diff --git a/drivers/net/npe/Makefile b/drivers/net/npe/Makefile
deleted file mode 100644
index 0779255..0000000
--- a/drivers/net/npe/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-LOCAL_CFLAGS  += -I$(TOPDIR)/drivers/net/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB -D__linux
-CFLAGS  += $(LOCAL_CFLAGS)
-CPPFLAGS  += $(LOCAL_CFLAGS) # needed for depend
-
-obj-y := npe.o \
-	miiphy.o \
-	IxOsalBufferMgt.o \
-	IxOsalIoMem.o \
-	IxOsalOsCacheMMU.o \
-	IxOsalOsMsgQ.o \
-	IxOsalOsSemaphore.o \
-	IxOsalOsServices.o \
-	IxOsalOsThread.o \
-	IxEthAcc.o \
-	IxEthAccCommon.o \
-	IxEthAccControlInterface.o \
-	IxEthAccDataPlane.o \
-	IxEthAccMac.o \
-	IxEthAccMii.o \
-	IxEthDBAPI.o \
-	IxEthDBAPISupport.o \
-	IxEthDBCore.o \
-	IxEthDBEvents.o \
-	IxEthDBFeatures.o \
-	IxEthDBFirewall.o \
-	IxEthDBHashtable.o \
-	IxEthDBLearning.o \
-	IxEthDBMem.o \
-	IxEthDBNPEAdaptor.o \
-	IxEthDBPortUpdate.o \
-	IxEthDBReports.o \
-	IxEthDBSearch.o \
-	IxEthDBSpanningTree.o \
-	IxEthDBUtil.o \
-	IxEthDBVlan.o \
-	IxEthDBWiFi.o \
-	IxEthMii.o \
-	IxQMgrAqmIf.o \
-	IxQMgrDispatcher.o \
-	IxQMgrInit.o \
-	IxQMgrQAccess.o \
-	IxQMgrQCfg.o \
-	IxFeatureCtrl.o \
-	IxNpeDl.o \
-	IxNpeDlImageMgr.o \
-	IxNpeDlNpeMgr.o \
-	IxNpeDlNpeMgrUtils.o \
-	IxNpeMh.o \
-	IxNpeMhConfig.o \
-	IxNpeMhReceive.o \
-	IxNpeMhSend.o \
-	IxNpeMhSolicitedCbMgr.o \
-	IxNpeMhUnsolicitedCbMgr.o
diff --git a/drivers/net/npe/include/IxAssert.h b/drivers/net/npe/include/IxAssert.h
deleted file mode 100644
index 8be0caf..0000000
--- a/drivers/net/npe/include/IxAssert.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/**
- * @file IxAssert.h
- *
- * @date 21-MAR-2002 (replaced by OSAL)
- *
- * @brief This file contains assert and ensure macros used by the IXP400 software
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxAssert IXP400 Assertion Macros (IxAssert) API
- *
- * @brief Assertion support
- *
- * @{
- */
-
-#ifndef IXASSERT_H
-
-#ifndef __doxygen_HIDE
-#define IXASSERT_H
-#endif /* __doxygen_HIDE */
-
-#include "IxOsalBackward.h"
-
-#endif /* IXASSERT_H */
-
-/**
- * @} addtogroup IxAssert
- */
-
-
-
diff --git a/drivers/net/npe/include/IxAtmSch.h b/drivers/net/npe/include/IxAtmSch.h
deleted file mode 100644
index 7d74771..0000000
--- a/drivers/net/npe/include/IxAtmSch.h
+++ /dev/null
@@ -1,480 +0,0 @@
-/**
- * @file    IxAtmSch.h
- *
- * @date    23-NOV-2001
- *
- * @brief   Header file for the IXP400 ATM Traffic Shaper
- *
- * This component demonstrates an ATM Traffic Shaper implementation. It
- * will perform shaping on upto 12 ports and total of 44 VCs accross all ports,
- * 32 are intended for AAL0/5 and 12 for OAM (1 per port).
- * The supported traffic types are;1 rt-VBR VC where PCR = SCR.
- * (Effectively CBR) and Up-to 44 VBR VCs.
- *
- * This component models the ATM ports and VCs and is capable of producing
- * a schedule of ATM cells per port which can be supplied to IxAtmdAcc
- * for execution on the data path.
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- *
- * @sa IxAtmm.h
- *
- */
-
-/**
- * @defgroup IxAtmSch IXP400 ATM Transmit Scheduler (IxAtmSch) API
- *
- * @brief IXP400 ATM scheduler component Public API
- *
- * @{
- */
-
-#ifndef IXATMSCH_H
-#define IXATMSCH_H
-
-#include "IxOsalTypes.h"
-#include "IxAtmTypes.h"
-
-/*
- * #defines and macros used in this file.
- */
-
-/* Return codes */
-
-/** 
- * @ingroup IxAtmSch
- *
- * @def IX_ATMSCH_RET_NOT_ADMITTED
- * @brief Indicates that CAC function has rejected VC registration due
- *         to insufficient line capacity.
-*/
-#define IX_ATMSCH_RET_NOT_ADMITTED 2
-
-/**  
- * @ingroup IxAtmSch
- *
- * @def IX_ATMSCH_RET_QUEUE_FULL
- *  @brief Indicates that the VC queue is full, no more demand can be
- *         queued at this time.
- */
-#define IX_ATMSCH_RET_QUEUE_FULL 3
-
-/**  
- * @ingroup IxAtmSch
- *
- *  @def IX_ATMSCH_RET_QUEUE_EMPTY
- *  @brief Indicates that all VC queues on this port are empty and
- *         therefore there are no cells to be scheduled at this time.
- */
-#define IX_ATMSCH_RET_QUEUE_EMPTY 4
-
-/*
- * Function declarations
- */
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchInit(void)
- *
- *  @brief This function is used to initialize the ixAtmSch component. It
- *         should be called before any other IxAtmSch API function.
- *
- * @param None
- *
- * @return
- * - <b>IX_SUCCESS :</b> indicates that
- *          -# The ATM scheduler component has been successfully initialized.
- *          -# The scheduler is ready to accept Port modelling requests.
- * - <b>IX_FAIL :</b> Some internal error has prevented the scheduler component
- *          from initialising.
- */
-PUBLIC IX_STATUS
-ixAtmSchInit(void);
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchPortModelInitialize( IxAtmLogicalPort port,
-                                       unsigned int portRate,
-                                       unsigned int minCellsToSchedule)
- *
- * @brief This function shall be called first to initialize an ATM port before
- *         any other ixAtmSch API calls may be made for that port.
- *
- * @param port @ref IxAtmLogicalPort [in] - The specific port to initialize.  Valid
- *          values range from 0 to IX_UTOPIA_MAX_PORTS - 1, representing a 
- *          maximum of IX_UTOPIA_MAX_PORTS possible ports.
- *
- * @param portRate unsigned int [in] - Value indicating the upstream capacity
- *          of the indicated port.  The value should be supplied in
- *          units of ATM (53 bytes) cells per second.
- *          A port rate of 800Kbits/s is the equivalent 
- *          of 1886 cells per second
- *
- * @param minCellsToSchedule unsigned int [in] - This parameter specifies the minimum
- *          number of cells which the scheduler will put in a schedule
- *          table for this port. This value sets the worst case CDVT for VCs
- *          on this port i.e. CDVT = 1*minCellsToSchedule/portRate.
- * @return
- *    - <b>IX_SUCCESS :</b> indicates that
- *          -# The ATM scheduler has been successfully initialized.
- *          -# The requested port model has been established.
- *          -# The scheduler is ready to accept VC modelling requests
- *            on the ATM port.
- *    - <b>IX_FAIL :</b> indicates the requested port could not be
- * initialized.  */
-PUBLIC IX_STATUS
-ixAtmSchPortModelInitialize( IxAtmLogicalPort port,
-                                       unsigned int portRate,
-                                       unsigned int minCellsToSchedule);
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchPortRateModify( IxAtmLogicalPort port,
-                        unsigned int portRate)
- *
- *  @brief This function is called to modify the portRate on a
- *         previously initialized port, typically in the event that
- *         the line condition of the port changes.
- *
- * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port which is to be
- *          modified.
- *
- * @param portRate unsigned int [in] - Value indicating the new upstream
- *          capacity for this port in cells/second.
- *          A port rate of 800Kbits/s is the equivalent 
- *          of 1886 cells per second
- *
- * @return
- * - <b>IX_SUCCESS :</b> The port rate has been successfully modified.<br>
- * - <b>IX_FAIL :</b> The port rate could not be modified, either
- *      because the input data was invalid, or the new port rate is
- *      insufficient to support established ATM VC contracts on this
- *      port.
- *
- * @warning The IxAtmSch component will validate the supplied port
- *          rate is sufficient to support all established VC
- *          contracts on the port.  If the new port rate is
- *          insufficient to support all established contracts then
- *          the request to modify the port rate will be rejected.
- *          In this event, the user is expected to remove
- *          established contracts using the ixAtmSchVcModelRemove
- *          interface and then retry this interface.
- *
- * @sa ixAtmSchVcModelRemove() */
-PUBLIC IX_STATUS
-ixAtmSchPortRateModify( IxAtmLogicalPort port,
-                        unsigned int portRate);
-
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchVcModelSetup( IxAtmLogicalPort port,
-                      IxAtmTrafficDescriptor *trafficDesc,
-                      IxAtmSchedulerVcId *vcId)
- *
- *  @brief A client calls this interface to set up an upstream
- *         (transmitting) virtual connection model (VC) on the
- *         specified ATM port.  This function also provides the
- *         virtual * connection admission control (CAC) service to the
- *         client.
- *
- * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the upstream
- *          VC is to be established.
- *
- * @param *trafficDesc @ref IxAtmTrafficDescriptor [in] - Pointer to a structure
- *          describing the requested traffic contract of the VC to be
- *          established.  This structure contains the typical ATM
- *          traffic descriptor values (e.g. PCR, SCR, MBS, CDVT, etc.)
- *          defined by the ATM standard.
- *
- * @param *vcId @ref IxAtmSchedulerVcId [out] - This value will be filled with the
- *              port-unique identifier for this virtual connection.  A
- *              valid identification is a non-negative number.
- *
- * @return
- * - <b>IX_SUCCESS :</b> The VC has been successfully established on
- *      this port.  The client may begin to submit demand on this VC.
- * - <b>IX_ATMSCH_RET_NOT_ADMITTED :</b> The VC cannot be established
- *      on this port because there is insufficient upstream capacity
- *      available to support the requested traffic contract descriptor
- * - <b>IX_FAIL :</b>Input data are invalid.  VC has not been
- *      established.
- */
-PUBLIC IX_STATUS
-ixAtmSchVcModelSetup( IxAtmLogicalPort port,
-                      IxAtmTrafficDescriptor *trafficDesc,
-                      IxAtmSchedulerVcId *vcId);
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchVcConnIdSet( IxAtmLogicalPort port,
-                     IxAtmSchedulerVcId vcId,
-                     IxAtmConnId vcUserConnId)
- *
- *  @brief A client calls this interface to set the vcUserConnId for a VC on
- *         the specified ATM port. This vcUserConnId will default to
- *         IX_ATM_IDLE_CELLS_CONNID if this function is not called for a VC.
- *         Hence if the client does not call this function for a VC then only idle
- *         cells will be scheduled for this VC.
- *
- * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the upstream
- *        VC is has been established.
- *
- * @param vcId @ref IxAtmSchedulerVcId [in] - This is the unique identifier for this virtual
- *        connection. A valid identification is a non-negative number and is
- *        all ports.
- *
- * @param vcUserConnId @ref IxAtmConnId [in] - The connId is used to refer to a VC in schedule
- *        table entries. It is treated as the Id by which the scheduler client
- *        knows the VC. It is used in any communicatations from the Scheduler
- *        to the scheduler user e.g. schedule table entries.
- *
- * @return
- * - <b>IX_SUCCESS :</b> The id has successfully been set.
- * - <b>IX_FAIL :</b>Input data are invalid. connId id is not established.
- */
-PUBLIC IX_STATUS
-ixAtmSchVcConnIdSet( IxAtmLogicalPort port,
-                     IxAtmSchedulerVcId vcId,
-                     IxAtmConnId vcUserConnId);
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchVcModelRemove( IxAtmLogicalPort port,
-                       IxAtmSchedulerVcId vcId)
- *
- *  @brief Interface called by the client to remove a previously
- *         established VC on a particular port.
- *
- * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be
- *          removed is established.
- *
- * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be removed.  This is the
- *          value returned by the @ref ixAtmSchVcModelSetup call which
- *          established the relevant VC.
- *
- * @return
- * - <b>IX_SUCCESS :</b> The VC has been successfully removed from
- *      this port. It is no longer modelled on this port.
- * - <b>IX_FAIL :</b>Input data are invalid. The VC is still being modeled
- *      by the traffic shaper.
- *
- * @sa ixAtmSchVcModelSetup() 
- */
-PUBLIC IX_STATUS
-ixAtmSchVcModelRemove( IxAtmLogicalPort port,
-                       IxAtmSchedulerVcId vcId);
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchVcQueueUpdate( IxAtmLogicalPort port,
-                       IxAtmSchedulerVcId vcId,
-                       unsigned int numberOfCells)
- *
- *  @brief The client calls this function to notify IxAtmSch that the
- *         user of a VC has submitted cells for transmission.
- *
- *  This information is stored, aggregated from a number of calls to
- *  ixAtmSchVcQueueUpdate and eventually used in the call to
- *  ixAtmSchTableUpdate.
- *
- *  Normally IxAtmSch will update the VC queue by adding the number of
- *  cells to the current queue length.  However, if IxAtmSch
- *  determines that the user has over-submitted for the VC and
- *  exceeded its transmission quota the queue request can be rejected.
- *  The user should resubmit the request later when the queue has been
- *  depleted.
- *
- *  This implementation of ixAtmSchVcQueueUpdate uses no operating
- *  system or external facilities, either directly or indirectly.
- *  This allows clients to call this function form within an interrupt handler.
- *
- *  This interface is structurally compatible with the
- *  IxAtmdAccSchQueueUpdate callback type definition required for
- *  IXP400 ATM scheduler interoperability.
- *
- * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be
- *          updated is established.
- *
- * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be updated.  This is the
- *          value returned by the @ref ixAtmSchVcModelSetup call which
- *          established the relevant VC.
- *
- * @param numberOfCells unsigned int [in] - Indicates how many ATM cells should
- *          be added to the queue for this VC.
- *
- * @return
- *  - <b>IX_SUCCESS :</b> The VC queue has been successfully updated.
- *  - <b>IX_ATMSCH_RET_QUEUE_FULL :</b> The VC queue has reached a
- *       preset limit.  This indicates the client has over-submitted
- *       and exceeded its transmission quota.  The request is
- *       rejected.  The VC queue is not updated.  The VC user is
- *       advised to resubmit the request later.
- *  - <b>IX_FAIL :</b> The input are invalid.  No VC queue is updated.
- *
- * @warning IxAtmSch assumes that the calling software ensures that
- *          calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and
- *          ixAtmSchTableUpdate are both self and mutually exclusive
- *          for the same port.
- *
- * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate().  */
-PUBLIC IX_STATUS
-ixAtmSchVcQueueUpdate( IxAtmLogicalPort port,
-                       IxAtmSchedulerVcId vcId,
-                       unsigned int numberOfCells);
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchVcQueueClear( IxAtmLogicalPort port,
-                      IxAtmSchedulerVcId vcId)
- *
- *  @brief The client calls this function to remove all currently
- *         queued cells from a registered VC.  The pending cell count
- *         for the specified VC is reset to zero.
- *
- *  This interface is structurally compatible with the
- *  IxAtmdAccSchQueueClear callback type definition required for
- *  IXP400 ATM scheduler interoperability.
- *
- * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be
- *          cleared is established.
- *
- * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be cleared.  This is the
- *          value returned by the @ref ixAtmSchVcModelSetup call which
- *          established the relevant VC.
- *
- * @return
- *  - <b>IX_SUCCESS :</b> The VC queue has been successfully cleared.
- *  - <b>IX_FAIL :</b> The input are invalid.  No VC queue is modified.
- *
- * @warning IxAtmSch assumes that the calling software ensures that
- *          calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and
- *          ixAtmSchTableUpdate are both self and mutually exclusive
- *          for the same port.
- *
- * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate().  */
-PUBLIC IX_STATUS
-ixAtmSchVcQueueClear( IxAtmLogicalPort port,
-                      IxAtmSchedulerVcId vcId);
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchTableUpdate( IxAtmLogicalPort port,
-                     unsigned int maxCells,
-                     IxAtmScheduleTable **rettable)
- *
- *  @brief The client calls this function to request an update of the
- *         schedule table for a particular ATM port.
- *
- *  This is called when the client decides it needs a new sequence of
- *  cells to send (probably because the transmit queue is near to
- *  empty for this ATM port).  The scheduler will use its stored
- *  information on the cells submitted for transmit (i.e. data
- *  supplied via @ref ixAtmSchVcQueueUpdate function) with the traffic
- *  descriptor information of all established VCs on the ATM port to
- *  decide the sequence of cells to be sent and fill the schedule
- *  table for a period of time into the future.
- *
- *  IxAtmSch will guarantee a minimum of minCellsToSchedule if there
- *  is at least one cell ready to send. If there are no cells then
- *  IX_ATMSCH_RET_QUEUE_EMPTY is returned.
- *
- *  This implementation of ixAtmSchTableUpdate uses no operating
- *  system or external facilities, either directly or indirectly.
- *  This allows clients to call this function form within an FIQ
- *  interrupt handler.
- *
- * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port for which requested
- *          schedule table is to be generated.
- *
- * @param maxCells unsigned [in] - Specifies the maximum number of cells
- *          that must be scheduled in the supplied table during any
- *          call to the interface.
- *
- * @param **table @ref IxAtmScheduleTable [out] - A pointer to an area of
- *              storage is returned which contains the generated
- *              schedule table.  The client should not modify the
- *              contents of this table.
- *
- * @return
- *  - <b>IX_SUCCESS :</b> The schedule table has been published.
- *       Currently there is at least one VC queue that is nonempty.
- *  - <b>IX_ATMSCH_RET_QUEUE_EMPTY :</b> Currently all VC queues on
- *       this port are empty.  The schedule table returned is set to
- *       NULL.  The client is not expected to invoke this function
- *       again until more cells have been submitted on this port
- *       through the @ref ixAtmSchVcQueueUpdate function.
- *  - <b>IX_FAIL :</b> The input are invalid.  No action is taken.
- *
- * @warning IxAtmSch assumes that the calling software ensures that
- *          calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and
- *          ixAtmSchTableUpdate are both self and mutually exclusive
- *          for the same port.
- *
- * @warning Subsequent calls to this function for the same port will
- *          overwrite the contents of previously supplied schedule
- *          tables.  The client must be completely finished with the
- *          previously supplied schedule table before calling this
- *          function again for the same port.
- *
- * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate().  */
-PUBLIC IX_STATUS
-ixAtmSchTableUpdate( IxAtmLogicalPort port,
-                     unsigned int maxCells,
-                     IxAtmScheduleTable **rettable);
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchShow(void)
- *
- *  @brief Utility function which will print statistics on the current
- *         and accumulated state of VCs and traffic in the ATM
- *         scheduler component.  Output is sent to the default output
- *         device.
- *
- * @param none
- * @return none
- */
-PUBLIC void
-ixAtmSchShow(void);
-
-/**  
- * @ingroup IxAtmSch
- *
- * @fn ixAtmSchStatsClear(void)
- *
- *  @brief Utility function which will reset all counter statistics in
- *         the ATM scheduler to zero.
- *
- * @param none
- * @return none
- */
-PUBLIC void
-ixAtmSchStatsClear(void);
-
-#endif
-/* IXATMSCH_H */
-
-/** @} */
diff --git a/drivers/net/npe/include/IxAtmTypes.h b/drivers/net/npe/include/IxAtmTypes.h
deleted file mode 100644
index 6c8d12f..0000000
--- a/drivers/net/npe/include/IxAtmTypes.h
+++ /dev/null
@@ -1,385 +0,0 @@
-/**
- * @file IxAtmTypes.h
- *
- * @date 24-MAR-2002
- *
- * @brief This file contains Atm types common to a number of Atm components.
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/* ------------------------------------------------------
-   Doxygen group definitions
-   ------------------------------------------------------ */
-/**
- * @defgroup IxAtmTypes IXP400 ATM Types (IxAtmTypes)
- *
- * @brief The common set of types used in many Atm components
- *
- * @{ */
-
-#ifndef IXATMTYPES_H
-#define IXATMTYPES_H
-
-#include "IxNpeA.h"
-
-/**
- * @enum IxAtmLogicalPort
- *
- * @brief Logical Port Definitions  :
- *
- * Only 1 port is available in SPHY configuration
- * 12 ports are enabled in MPHY configuration
- *
- */
-typedef enum
-{
-    IX_UTOPIA_PORT_0 = 0,  /**< Port 0 */
-#ifdef IX_NPE_MPHYMULTIPORT
-    IX_UTOPIA_PORT_1,      /**< Port 1 */
-    IX_UTOPIA_PORT_2,      /**< Port 2 */
-    IX_UTOPIA_PORT_3,      /**< Port 3 */
-    IX_UTOPIA_PORT_4,      /**< Port 4 */
-    IX_UTOPIA_PORT_5,      /**< Port 5 */
-    IX_UTOPIA_PORT_6,      /**< Port 6 */
-    IX_UTOPIA_PORT_7,      /**< Port 7 */
-    IX_UTOPIA_PORT_8,      /**< Port 8 */
-    IX_UTOPIA_PORT_9,      /**< Port 9 */
-    IX_UTOPIA_PORT_10,     /**< Port 10 */
-    IX_UTOPIA_PORT_11,     /**< Port 11 */
-#endif /* IX_NPE_MPHY */
-    IX_UTOPIA_MAX_PORTS    /**< Not a port - just a definition for the
-                           * maximum possible ports
-                           */
-} IxAtmLogicalPort;
-
-/**
- * @def IX_ATM_CELL_PAYLOAD_SIZE
- * @brief Size of a ATM cell payload
- */
-#define IX_ATM_CELL_PAYLOAD_SIZE             (48)
-
-/**
- * @def IX_ATM_CELL_SIZE
- * @brief Size of a ATM cell, including header
- */
-#define IX_ATM_CELL_SIZE                     (53)
-
-/**
- * @def IX_ATM_CELL_SIZE_NO_HEC
- * @brief Size of a ATM cell, excluding HEC byte
- */
-#define IX_ATM_CELL_SIZE_NO_HEC              (IX_ATM_CELL_SIZE - 1)
-
-/**
- * @def IX_ATM_OAM_CELL_SIZE_NO_HEC
- * @brief Size of a OAM cell, excluding HEC byte
- */
-#define IX_ATM_OAM_CELL_SIZE_NO_HEC          IX_ATM_CELL_SIZE_NO_HEC
-
-/**
- * @def IX_ATM_AAL0_48_CELL_PAYLOAD_SIZE
- * @brief Size of a AAL0 48 Cell payload
- */
-#define IX_ATM_AAL0_48_CELL_PAYLOAD_SIZE     IX_ATM_CELL_PAYLOAD_SIZE
-
-/**
- * @def IX_ATM_AAL5_CELL_PAYLOAD_SIZE
- * @brief Size of a AAL5 Cell payload
- */
-#define IX_ATM_AAL5_CELL_PAYLOAD_SIZE        IX_ATM_CELL_PAYLOAD_SIZE
-
-/**
- * @def IX_ATM_AAL0_52_CELL_SIZE_NO_HEC
- * @brief Size of a AAL0 52 Cell, excluding HEC byte
- */
-#define IX_ATM_AAL0_52_CELL_SIZE_NO_HEC      IX_ATM_CELL_SIZE_NO_HEC
-
-
-/**
- * @def IX_ATM_MAX_VPI
- * @brief Maximum value of an ATM VPI
- */
-#define IX_ATM_MAX_VPI 255
-
-/**
- * @def IX_ATM_MAX_VCI
- * @brief Maximum value of an ATM VCI
- */
-#define IX_ATM_MAX_VCI 65535
-
- /**
- * @def IX_ATM_MAX_NUM_AAL_VCS
- * @brief Maximum number of active AAL5/AAL0 VCs in the system
- */
-#define IX_ATM_MAX_NUM_AAL_VCS 32
-
-/**
- * @def IX_ATM_MAX_NUM_VC
- * @brief Maximum number of active AAL5/AAL0 VCs in the system
- * The use of this macro is depreciated, it is retained for
- * backward compatiblity. For current software release
- * and beyond the define IX_ATM_MAX_NUM_AAL_VC should be used.
- */
-#define IX_ATM_MAX_NUM_VC IX_ATM_MAX_NUM_AAL_VCS
-
-
-
-/**
- * @def IX_ATM_MAX_NUM_OAM_TX_VCS
- * @brief Maximum number of active OAM Tx VCs in the system, 
- *        1 OAM VC per port
- */
-#define IX_ATM_MAX_NUM_OAM_TX_VCS IX_UTOPIA_MAX_PORTS
-
-/**
- * @def IX_ATM_MAX_NUM_OAM_RX_VCS
- * @brief Maximum number of active OAM Rx VCs in the system, 
- *        1 OAM VC shared accross all ports
- */
-#define IX_ATM_MAX_NUM_OAM_RX_VCS 1
-
-/**
- * @def IX_ATM_MAX_NUM_AAL_OAM_TX_VCS
- * @brief Maximum number of active AAL5/AAL0/OAM Tx VCs in the system
- */
-#define IX_ATM_MAX_NUM_AAL_OAM_TX_VCS (IX_ATM_MAX_NUM_AAL_VCS + IX_ATM_MAX_NUM_OAM_TX_VCS)
-
-/**
- * @def IX_ATM_MAX_NUM_AAL_OAM_RX_VCS
- * @brief Maximum number of active AAL5/AAL0/OAM Rx VCs in the system
- */
-#define IX_ATM_MAX_NUM_AAL_OAM_RX_VCS (IX_ATM_MAX_NUM_AAL_VCS + IX_ATM_MAX_NUM_OAM_RX_VCS)
-
-/**
- *  @def IX_ATM_IDLE_CELLS_CONNID
- *  @brief VC Id used to indicate idle cells in the returned schedule table.
- */
-#define IX_ATM_IDLE_CELLS_CONNID 0
-
-
-/**
- *  @def IX_ATM_CELL_HEADER_VCI_GET
- *  @brief get the VCI field from a cell header
- */
-#define IX_ATM_CELL_HEADER_VCI_GET(cellHeader) \
-    (((cellHeader) >> 4) & IX_OAM_VCI_BITS_MASK);
-
-/**
- *  @def IX_ATM_CELL_HEADER_VPI_GET
- *  @brief get the VPI field from a cell header
- */
-#define IX_ATM_CELL_HEADER_VPI_GET(cellHeader) \
-    (((cellHeader) >> 20) & IX_OAM_VPI_BITS_MASK);
-
-/**
- *  @def IX_ATM_CELL_HEADER_PTI_GET
- *  @brief get the PTI field from a cell header
- */
-#define IX_ATM_CELL_HEADER_PTI_GET(cellHeader) \
-    ((cellHeader) >> 1) & IX_OAM_PTI_BITS_MASK;
-
-/**
- * @typedef IxAtmCellHeader
- *
- * @brief ATM Cell Header, does not contain 4 byte HEC, added by NPE-A 
- */
-typedef unsigned int IxAtmCellHeader;
-
-
-/**
- * @enum IxAtmServiceCategory
- *
- * @brief Enumerated type representing available ATM service categories.
- *   For more informatoin on these categories, see "Traffic Management
- *   Specification" v4.1, published by the ATM Forum -
- *   http://www.atmforum.com
- */
-typedef enum
-{
-    IX_ATM_CBR,    /**< Constant Bit Rate */
-    IX_ATM_RTVBR,  /**< Real Time Variable Bit Rate */
-    IX_ATM_VBR,    /**< Variable Bit Rate */
-    IX_ATM_UBR,    /**< Unspecified Bit Rate */
-    IX_ATM_ABR     /**< Available Bit Rate (not supported) */
-
-} IxAtmServiceCategory;
-
-/**
- *
- * @enum IxAtmRxQueueId
- *
- * @brief Rx Queue Type for RX traffic
- *
- * IxAtmRxQueueId defines the queues involved for receiving data.
- *
- * There are two queues to facilitate prioritisation handling
- * and processing the 2 queues with different algorithms and
- * constraints
- *
- * e.g. : one queue can carry voice (or time-critical traffic), the
- * other queue can carry non-voice traffic
- *
- */
-typedef enum
-{
-    IX_ATM_RX_A = 0,      /**< RX queue A */
-    IX_ATM_RX_B,          /**< RX queue B */
-    IX_ATM_MAX_RX_STREAMS /**< Maximum number of RX streams */
-} IxAtmRxQueueId;
-
-/**
- * @brief Structure describing an ATM traffic contract for a Virtual
- *         Connection (VC).
- *
- * Structure is used to specify the requested traffic contract for a
- * VC to the IxAtmSch component using the @ref ixAtmSchVcModelSetup
- * interface.
- *
- * These parameters are defined by the ATM forum working group
- * (http://www.atmforum.com).
- *
- * @note Typical values for a voice channel 64 Kbit/s
- * - atmService @a IX_ATM_RTVBR
- * - pcr   400  (include IP overhead, and AAL5 trailer)
- * - cdvt  5000000 (5 ms)
- * - scr = pcr
- *
- * @note Typical values for a data channel 800 Kbit/s
- * - atmService @a IX_ATM_UBR
- * - pcr   1962  (include IP overhead, and AAL5 trailer)
- * - cdvt  5000000 (5 ms)
- *
- */
-typedef struct
-{
-    IxAtmServiceCategory atmService; /**< ATM service category */
-    unsigned pcr;   /**< Peak Cell Rate - cells per second */
-    unsigned cdvt;  /**< Cell Delay Variation Tolerance - in nanoseconds */
-    unsigned scr;   /**< Sustained Cell Rate - cells per second */
-    unsigned mbs;   /**< Max Burst Size - cells */
-    unsigned mcr;   /**< Minimum Cell Rate - cells per second */
-    unsigned mfs;   /**< Max Frame Size - cells */
-} IxAtmTrafficDescriptor;
-
-/**
- * @typedef IxAtmConnId
- *
- * @brief ATM VC data connection identifier.
- *
- * This is is generated by IxAtmdAcc when a successful connection is
- * made on a VC. The is the ID by which IxAtmdAcc knows an active
- * VC and should be used in IxAtmdAcc API calls to reference a
- * specific VC.
- */
-typedef unsigned int IxAtmConnId;
-
-/**
- * @typedef IxAtmSchedulerVcId
- *
- * @brief ATM VC scheduling connection identifier.
- *
- * This id is generated and used by ATM Tx controller, generally
- * the traffic shaper (e.g. IxAtmSch). The IxAtmdAcc component
- * will request one of these Ids whenever a data connection on
- * a Tx VC is requested. This ID will be used in callbacks to
- * the ATM Transmission Ctrl s/w (e.g. IxAtmm) to reference a
- * particular VC.
- */
-typedef int IxAtmSchedulerVcId;
-
-/**
- * @typedef IxAtmNpeRxVcId
- *
- * @brief ATM Rx VC identifier used by the ATM Npe.
- *
- * This Id is generated by IxAtmdAcc when a successful data connection
- * is made on a rx VC.
- */
-typedef unsigned int IxAtmNpeRxVcId;
-
-/**
- * @brief ATM Schedule Table entry
- *
- * This IxAtmScheduleTableEntry is used by an ATM scheduler to inform
- * IxAtmdAcc about the data to transmit (in term of cells per VC)
- *
- * This structure defines
- * @li the number of cells to be transmitted (numberOfCells)
- * @li the VC connection to be used for transmission (connId).
- *
- * @note - When the connection Id value is IX_ATM_IDLE_CELLS_CONNID, the
- * corresponding number of idle cells will be transmitted to the hardware.
- *
- */
-typedef struct
-{
-    IxAtmConnId connId; /**< connection Id
-                 *
-                 * Identifier of VC from which cells are to be transmitted.
-                 * When this valus is IX_ATM_IDLE_CELLS_CONNID, this indicates
-                 * that the system should transmit the specified number
-                 * of idle cells. Unknown connIds result in the transmission
-                 * idle cells.
-                 */
-    unsigned int numberOfCells; /**< number of cells to transmit
-                 *
-                 * The number of contiguous cells to schedule from this VC
-                 * at this point. The valid range is from 1 to
-                 * @a IX_ATM_SCHEDULETABLE_MAXCELLS_PER_ENTRY. This
-                 * number can swap over mbufs and pdus. OverSchduling results
-                 * in the transmission of idle cells.
-                 */
-} IxAtmScheduleTableEntry;
-
-/**
- * @brief This structure defines a schedule table which gives details
- *         on which data (from which VCs) should be transmitted for a
- *         forthcoming period of time for a particular port and the
- *         order in which that data should be transmitted.
- *
- *  The schedule table consists of a series of entries each of which
- *  will schedule one or more cells from a particular registered VC.
- *  The total number of cells scheduled and the total number of
- *  entries in the table are also indicated.
- *
- */
-typedef struct
-{
-    unsigned tableSize;      /**< Number of entries
-                              *
-                              * Indicates the total number of
-                              *   entries in the table.
-                              */
-    unsigned totalCellSlots; /**< Number of cells
-                              *
-                              * Indicates the total number of ATM
-                              *   cells which are scheduled by all the
-                              *   entries in the table.
-                              */
-    IxAtmScheduleTableEntry *table; /**< Pointer to schedule entries
-                                     *
-                                     * Pointer to an array
-                                     *   containing tableSize entries
-                                     */
-} IxAtmScheduleTable;
-
-#endif /* IXATMTYPES_H */
-
-/**
- * @} defgroup IxAtmTypes
- */
-
-
diff --git a/drivers/net/npe/include/IxAtmdAcc.h b/drivers/net/npe/include/IxAtmdAcc.h
deleted file mode 100644
index b37c615..0000000
--- a/drivers/net/npe/include/IxAtmdAcc.h
+++ /dev/null
@@ -1,1169 +0,0 @@
-/**
- * @file    IxAtmdAcc.h
- *
- * @date    07-Nov-2001
- *
- * @brief IxAtmdAcc Public API
- *
- * This file contains the public API of IxAtmdAcc, related to the
- * data functions of the component
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/* ------------------------------------------------------
-   Doxygen group definitions
-   ------------------------------------------------------ */
-
-/**
- *
- * @defgroup IxAtmdAccAPI IXP400 ATM Driver Access (IxAtmdAcc) API
- *
- * @brief The public API for the IXP400 Atm Driver Data component
- *
- * IxAtmdAcc is the low level interface by which AAL0/AAL5 and
- * OAM data gets transmitted to,and received from the Utopia bus.
- *
- * For AAL0/AAL5 services transmit and receive connections may
- * be established independantly for unique combinations of
- * port,VPI,and VCI.
- *
- * Two AAL0 services supporting 48 or 52 byte cell data are provided.
- * Submitted AAL0 PDUs must be a multiple of the cell data size (48/52).
- * AAL0_52 is a raw cell service the client must format
- * the PDU with an ATM cell header (excluding HEC) at the start of
- * each cell, note that AtmdAcc does not validate the cell headers in
- * a submitted PDU.
- *
- * OAM cells cannot be received over the AAL0 service but instead
- * are received over a dedicated OAM service.
- *
- * For the OAM service an "OAM Tx channel" may be enabled for a port
- * by establishing a single dedicated OAM Tx connection on that port.
- * A single "OAM Rx channel" for all ports may be  enabled by
- * establishing a dedicated OAM Rx connection.
- *
- * The OAM service allows buffers containing 52 byte OAM F4/F5 cells
- * to be transmitted and received over the dedicated OAM channels.
- * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM
- * service offered by AtmdAcc is a raw cell transport service.
- * It is assumed that ITU I.610 procedures that make use of this
- * service are implemented above AtmdAcc.
- *
- * Note that the dedicated OAM connections are established on
- * reserved VPI,VCI, and (in the case of Rx) port values defined below.
- * These values are used purely to descriminate the dedicated OAM channels
- * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be
- * realised for particluar VPI/VCIs by manipulating the VPI,VCI
- * fields of the ATM cell headers of cells in the buffers passed
- * to AtmdAcc. Note that AtmdAcc does not validate the cell headers
- * in a submitted OAM PDU.
- *
- *
- *
- * This part is related to the User datapath processing
- *
- * @{
- */
-
-#ifndef IXATMDACC_H
-#define IXATMDACC_H
-
-#include "IxAtmTypes.h"
-
-/* ------------------------------------------------------
-   AtmdAcc Data Types definition
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @def IX_ATMDACC_WARNING
- *
- * @brief Warning return code
- *
- * This constant is used to tell IxAtmDAcc user about a special case.
- *
- */
-#define IX_ATMDACC_WARNING 2
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @def IX_ATMDACC_BUSY
- *
- * @brief Busy return code
- *
- * This constant is used to tell IxAtmDAcc user that the request
- * is correct, but cannot be processed because the IxAtmAcc resources
- * are already used. The user has to retry its request later
- *
- */
-#define IX_ATMDACC_BUSY 3
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @def IX_ATMDACC_RESOURCES_STILL_ALLOCATED
- *
- * @brief Disconnect return code
- *
- * This constant is used to tell IxAtmDAcc user that the disconnect
- * functions are not complete because the resources used by the driver
- * are not yet released. The user has to retry the disconnect call
- * later.
- *
- */
-#define IX_ATMDACC_RESOURCES_STILL_ALLOCATED 4
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @def IX_ATMDACC_DEFAULT_REPLENISH_COUNT
- *
- * @brief Default resources usage for RxVcFree replenish mechanism
- *
- * This constant is used to tell IxAtmDAcc to allocate and use
- * the minimum of resources for rx free replenish.
- *
- * @sa ixAtmdAccRxVcConnect
- */
-#define IX_ATMDACC_DEFAULT_REPLENISH_COUNT 0
-
-
-/**
- * @ingroup IxAtmdAccAPI
- *
- * @def IX_ATMDACC_OAM_TX_VPI
- *
- * @brief The reserved value used for the dedicated OAM
- * Tx connection. This "well known" value is used by atmdAcc and
- * its clients to dsicriminate the OAM channel, and should be chosen so
- * that it does not coencide with the VPI value used in an AAL0/AAL5 connection.
- * Any attempt to connect a service type other than OAM on this VPI will fail.
- *
- *
- */
-#define IX_ATMDACC_OAM_TX_VPI 0
-
-/**
- * @ingroup IxAtmdAccAPI
- *
- * @def IX_ATMDACC_OAM_TX_VCI
- *
- * @brief The reserved value used for the dedicated OAM
- * Tx connection. This "well known" value is used by atmdAcc and
- * its clients to dsicriminate the OAM channel, and should be chosen so
- * that it does not coencide with the VCI value used in an AAL0/AAL5 connection.
- * Any attempt to connect a service type other than OAM on this VCI will fail.
- */
-#define IX_ATMDACC_OAM_TX_VCI 0
-
-
- /**
- * @ingroup IxAtmdAccAPI
- *
- * @def IX_ATMDACC_OAM_RX_PORT
- *
- * @brief The reserved dummy PORT used for all dedicated OAM
- * Rx connections. Note that this is not a real port but must
- * have a value that lies within the valid range of port values.
- */
-#define IX_ATMDACC_OAM_RX_PORT IX_UTOPIA_PORT_0
-
- /**
- * @ingroup IxAtmdAccAPI
- *
- * @def IX_ATMDACC_OAM_RX_VPI
- *
- * @brief The reserved value value used for the dedicated OAM
- * Rx connection. This value should be chosen so that it does not
- * coencide with the VPI value used in an AAL0/AAL5 connection.
- * Any attempt to connect a service type other than OAM on this VPI will fail.
- */
-#define IX_ATMDACC_OAM_RX_VPI 0
-
-/**
- * @ingroup IxAtmdAccAPI
- *
- * @def IX_ATMDACC_OAM_RX_VCI
- *
- * @brief The reserved value value used for the dedicated OAM
- * Rx connection. This value should be chosen so that it does not
- * coencide with the VCI value used in an AAL0/AAL5 connection.
- * Any attempt to connect a service type other than OAM on this VCI will fail.
- */
-#define IX_ATMDACC_OAM_RX_VCI 0
-
-
-/**
- * @enum IxAtmdAccPduStatus
- *
- * @ingroup IxAtmdAccAPI
- *
- * @brief IxAtmdAcc Pdu status :
- *
- * IxAtmdAccPduStatus is used during a RX operation to indicate
- * the status of the received PDU
- *
- */
-
-typedef enum
-{
-    IX_ATMDACC_AAL0_VALID = 0,    /**< aal0 pdu */
-    IX_ATMDACC_OAM_VALID,         /**< OAM pdu */
-    IX_ATMDACC_AAL2_VALID,        /**< aal2 pdu @b reserved for future use */
-    IX_ATMDACC_AAL5_VALID,        /**< aal5 pdu complete and trailer is valid */
-    IX_ATMDACC_AAL5_PARTIAL,      /**< aal5 pdu not complete, trailer is missing */
-    IX_ATMDACC_AAL5_CRC_ERROR,    /**< aal5 pdu not complete, crc error/length error */
-    IX_ATMDACC_MBUF_RETURN        /**< empty buffer returned to the user */
-} IxAtmdAccPduStatus;
-
-
-/**
- *
- * @enum IxAtmdAccAalType
- *
- * @ingroup IxAtmdAccAPI
- *
- * @brief IxAtmdAcc AAL Service Type :
- *
- * IxAtmdAccAalType defines the type of traffic to run on this VC
- *
- */
-typedef enum
-{
-    IX_ATMDACC_AAL5,                /**< ITU-T AAL5 */
-    IX_ATMDACC_AAL2,                /**< ITU-T AAL2 @b reserved for future use */
-    IX_ATMDACC_AAL0_48,             /**< AAL0 48 byte payloads (cell header is added by NPE)*/
-    IX_ATMDACC_AAL0_52,             /**< AAL0 52 byte cell data (HEC is added by NPE) */
-    IX_ATMDACC_OAM,                 /**< OAM cell transport service (HEC is added by NPE)*/
-    IX_ATMDACC_MAX_SERVICE_TYPE     /**< not a service, used for parameter validation */
-} IxAtmdAccAalType;
-
-/**
- *
- * @enum IxAtmdAccClpStatus
- *
- * @ingroup IxAtmdAccAPI
- *
- * @brief IxAtmdAcc CLP indication
- *
- * IxAtmdAccClpStatus defines the CLP status of the current PDU
- *
- */
-typedef enum
-{
-    IX_ATMDACC_CLP_NOT_SET = 0,     /**< CLP indication is not set */
-    IX_ATMDACC_CLP_SET = 1     /**< CLP indication is set */
-} IxAtmdAccClpStatus;
-
-/**
- * @typedef IxAtmdAccUserId
- *
- * @ingroup IxAtmdAccAPI
- *
- * @brief User-supplied Id
- *
- * IxAtmdAccUserId is passed through callbacks and allows the
- * IxAtmdAcc user to identify the source of a call back. The range of
- * this user-owned Id is [0...2^32-1)].
- *
- * The user provides this own Ids on a per-channel basis as a parameter
- * in a call to @a ixAtmdAccRxVcConnect() or @a ixAtmdAccRxVcConnect()
- *
- * @sa ixAtmdAccRxVcConnect
- * @sa ixAtmdAccTxVcConnect
- *
- */
-typedef unsigned int IxAtmdAccUserId;
-
-/* ------------------------------------------------------
-   Part of the IxAtmdAcc interface related to RX traffic
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @brief  Rx callback prototype
- *
- * IxAtmdAccRxVcRxCallback is the prototype of the Rx callback user
- * function called once per PDU to pass a receive Pdu to a user on a
- * partilcular connection. The callback is likely to push the mbufs
- * to a protocol layer, and recycle the mbufs for a further use.
- *
- * @note -This function is called ONLY in the context of
- *        the @a ixAtmdAccRxDispatch() function
- *
- * @sa ixAtmdAccRxDispatch
- * @sa ixAtmdAccRxVcConnect
- *
- * @param port @ref IxAtmLogicalPort [in] - the port on which this PDU was received
- *        a logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
- * @param userId @ref IxAtmdAccUserId [in] - user Id provided in the call
- *        to @a ixAtmdAccRxVcConnect()
- * @param status @ref IxAtmdAccPduStatus [in] - an indication about the PDU validity.
- *        In the case of AAL0 the only possibile value is
- *        AAL0_VALID, in this case the client may optionally determine
- *        that an rx timeout occured by checking if the mbuf is
- *        compleletly or only partially filled, the later case
- *        indicating a timeout.
- *        In the case of OAM the only possible value is OAM valid.
- *        The status is set to @a IX_ATMDACC_MBUF_RETURN when
- *        the mbuf is released during a disconnect process.
- * @param clp @ref IxAtmdAccClpStatus [in] - clp indication for this PDU.
- *        For AAL5/AAL0_48 this information
- *        is set if the clp bit of any rx cell is set
- *        For AAL0-52/OAM the client may inspect the CLP in individual
- *        cell headers in the PDU, and this parameter is set to 0.
- * @param *mbufPtr @ref IX_OSAL_MBUF [in] - depending on the servive type a pointer to
- *        an mbuf (AAL5/AAL0/OAM) or mbuf chain (AAL5 only),
- *        that comprises the complete PDU data.
- *
- *        This parameter is guaranteed not to be a null pointer.
- *
- */
-typedef void (*IxAtmdAccRxVcRxCallback) (IxAtmLogicalPort port,
-                       IxAtmdAccUserId userId,
-                       IxAtmdAccPduStatus status,
-                       IxAtmdAccClpStatus clp,
-                       IX_OSAL_MBUF * mbufPtr);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @brief Callback prototype for free buffer level is low.
- *
- * IxAtmdAccRxVcFreeLowCallback is the prototype of the user function
- * which get called on a per-VC basis, when more  mbufs are needed to
- * continue the ATM data reception. This function is likely to supply
- * more available mbufs by one or many calls to the replenish function
- * @a ixAtmdAccRxVcFreeReplenish()
- *
- * This function is called when the number of available buffers for
- * reception is going under the threshold level as defined
- * in @a ixAtmdAccRxVcFreeLowCallbackRegister()
- *
- * This function is called inside an Qmgr dispatch context. No system
- * resource or interrupt-unsafe feature should be used inside this
- * callback.
- *
- * @sa ixAtmdAccRxVcFreeLowCallbackRegister
- * @sa IxAtmdAccRxVcFreeLowCallback
- * @sa ixAtmdAccRxVcFreeReplenish
- * @sa ixAtmdAccRxVcFreeEntriesQuery
- * @sa ixAtmdAccRxVcConnect
- *
- * @param userId @ref IxAtmdAccUserId [in] - user Id provided in the call
- * to @a ixAtmdAccRxVcConnect()
- *
- * @return None
- *
- */
-typedef void (*IxAtmdAccRxVcFreeLowCallback) (IxAtmdAccUserId userId);
-
-/* ------------------------------------------------------
-   Part of the IxAtmdAcc interface related to TX traffic
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @brief  Buffer callback prototype.
- *
- * This function is called to relinguish ownership of a transmitted
- * buffer chain to the user.
- *
- * @note -In the case of a chained mbuf the AmtdAcc component can
- * chain many user buffers together and pass ownership to the user in
- * one function call.
- *
- * @param userId @ref IxAtmdAccUserId [in] - user If provided at registration of this
- *        callback.
- * @param mbufPtr @ref IX_OSAL_MBUF [in] - a pointer to mbufs or chain of mbufs and is
- *        guaranteed not to be a null pointer.
- *
- */
-typedef void (*IxAtmdAccTxVcBufferReturnCallback) (IxAtmdAccUserId userId,
-                        IX_OSAL_MBUF * mbufPtr);
-
-/* ------------------------------------------------------
-   Part of the IxAtmdAcc interface related to Initialisation
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @fn ixAtmdAccInit (void)
- *
- * @brief Initialise the IxAtmdAcc Component
- *
- * This function initialise the IxAtmdAcc component. This function shall
- * be called before any other function of the API. Its role is to
- * initialise all internal resources of the IxAtmdAcc component.
- *
- * The ixQmgr component needs to be initialized prior the use of
- * @a ixAtmdAccInit()
- *
- * @param none
- *
- * Failing to initilialize the IxAtmdAcc API before any use of it will
- * result in a failed status.
- * If the specified component is not present, a success status will still be 
- * returned, however, a warning indicating the NPE to download to is not
- * present will be issued.
- *
- * @return @li IX_SUCCESS initialisation is complete (in case of component not
- *             being present, a warning is clearly indicated)
- * @return @li IX_FAIL unable to process this request either
- *             because this IxAtmdAcc is already initialised
- *             or some unspecified error has occrred.
- */
-PUBLIC IX_STATUS ixAtmdAccInit (void);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @fn ixAtmdAccShow (void)
- *
- * @brief Show IxAtmdAcc configuration on a per port basis
- *
- * @param none
- *
- * @return none
- *
- * @note - Display use printf() and are redirected to stdout
- */
-PUBLIC void
-ixAtmdAccShow (void);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- * 
- * @fn ixAtmdAccStatsShow (void)
- *
- * @brief Show all IxAtmdAcc stats
- *
- * @param none
- *
- * @return none
- *
- * @note - Stats display use printf() and are redirected to stdout
- */
-PUBLIC void
-ixAtmdAccStatsShow (void);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @fn ixAtmdAccStatsReset (void)
- *
- * @brief Reset all IxAtmdAcc stats
- *
- * @param none
- *
- * @return none
- *
- */
-PUBLIC void
-ixAtmdAccStatsReset (void);
-
-/* ------------------------------------------------------
-   Part of the IxAtmdAcc interface related to RX traffic
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @fn ixAtmdAccRxVcConnect (IxAtmLogicalPort port,
-                      unsigned int vpi,
-                      unsigned int vci,
-                      IxAtmdAccAalType aalServiceType,
-                      IxAtmRxQueueId rxQueueId,
-                      IxAtmdAccUserId userCallbackId,
-                      IxAtmdAccRxVcRxCallback rxCallback,
-                      unsigned int minimumReplenishCount,
-                      IxAtmConnId * connIdPtr,
-                      IxAtmNpeRxVcId * npeVcIdPtr )
- *
- * @brief Connect to a Aal Pdu receive service for a particular
- *        port/vpi/vci, and service type.
- *
- * This function allows a user to connect to an Aal5/Aal0/OAM Pdu receive service
- * for a particular port/vpi/vci. It registers the callback and allocates
- * internal resources and a Connection Id to be used in further API calls
- * related to this VCC.
- *
- * The function will setup VC receive service on the specified rx queue.
- *
- * This function is blocking and makes use internal locks, and hence
- * should not be called from an interrupt context.
- *
- * On return from @a ixAtmdAccRxVcConnect() with a failure status, the
- * connection Id parameter is unspecified. Its value cannot be used.
- * A connId is the reference by which IxAtmdAcc refers to a
- * connected VC. This identifier is the result of a succesful call
- * to a connect function. This identifier is invalid after a
- * sucessful call to a disconnect function.
- *
- * Calling this function for the same combination of Vpi, Vci and more
- * than once without calling @a ixAtmdAccRxVcTryDisconnect() will result in a
- * failure status.
- *
- * If this function returns success the user should supply receive
- * buffers by calling @a ixAtmdAccRxVcFreeReplenish() and then call
- * @a ixAtmdAccRxVcEnable() to begin receiving pdus.
- *
- * There is a choice of two receive Qs on which the VC pdus could be
- * receive. The user must associate the VC with one of these. Essentially
- * having two qs allows more flexible system configuration such as have
- * high prioriy traffic on one q (e.g. voice) and low priority traffic on
- * the other (e.g. data). The high priority Q could be serviced in
- * preference to the low priority Q. One queue may be configured to be
- * serviced as soon as there is traffic, the other queue may be configured
- * to be serviced by a polling mechanism running at idle time.
- *
- * Two AAL0 services supporting 48 or 52 byte cell data are provided.
- * Received AAL0 PDUs will be be a multiple of the cell data size (48/52).
- * AAL0_52 is a raw cell service and includes an ATM cell header
- * (excluding HEC) at the start of each cell.
- *
- * A single "OAM Rx channel" for all ports may be  enabled by
- * establishing a dedicated OAM Rx connection.
- *
- * The OAM service allows buffers containing 52 byte OAM F4/F5 cells
- * to be transmitted and received over the dedicated OAM channels.
- * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM
- * service offered by AtmdAcc is a raw cell transport service.
- * It is assumed that ITU I.610 procedures that make use of this
- * service are implemented above AtmdAcc.
- *
- * Note that the dedicated OAM connections are established on
- * reserved VPI,VCI, and (in the case of Rx) port values.
- * These values are used purely to descriminate the dedicated OAM channels
- * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be
- * realised for particluar VPI/VCIs by manipulating the VPI,VCI
- * fields of the ATM cell headers of cells in the buffers passed
- * to AtmdAcc.
- *
- * Calling this function prior to enable the port will fail.
- *
- * @sa ixAtmdAccRxDispatch
- * @sa ixAtmdAccRxVcEnable
- * @sa ixAtmdAccRxVcDisable
- * @sa ixAtmdAccRxVcTryDisconnect
- * @sa ixAtmdAccPortEnable
- *
- * @param port @ref IxAtmLogicalPort [in] - VC identification : logical PHY port
- *                  [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
- * @param vpi unsigned int [in] - VC identification : ATM Vpi [0..255] or IX_ATMDACC_OAM_VPI
- * @param vci unsigned int [in] - VC identification : ATM Vci [0..65535] or IX_ATMDACC_OAM_VCI
- * @param aalServiceType @ref IxAtmdAccAalType [in] - type of service: AAL5, AAL0_48, AAL0_52, or OAM
- * @param rxQueueId @ref IxAtmRxQueueId [in] - this identifieds which of two Qs the VC
- *     should use.when icoming traffic is processed
- * @param userCallbackId @ref IxAtmdAccUserId [in] - user Id used later as a parameter to
- *     the supplied rxCallback.
- * @param rxCallback [in] @ref IxAtmdAccRxVxRxCallback - function called when mbufs are received.
- *     This parameter cannot be a null pointer.
- * @param bufferFreeCallback [in] - function to be called to return
- *     ownership of buffers to IxAtmdAcc user.
- * @param minimumReplenishCount unsigned int [in] -  For AAL5/AAL0 the number of free mbufs
- *     to be used with this channel. Use a high number when the expected traffic
- *     rate on this channel is high, or when the user's mbufs are small, or when
- *     the RxVcFreeLow Notification has to be invoked less often. When this
- *     value is IX_ATMDACC_DEFAULT_REPLENISH_COUNT, the minimum of
- *     resources  will be used. Depending on traffic rate, pdu
- *     size and mbuf size, rxfree queue size, polling/interrupt rate, this value may
- *     require to be replaced by a different value in the range 1-128
- *     For OAM the rxFree queue size is fixed by atmdAcc and this parameter is ignored.
- * @param connIdPtr @ref IxAtmConnId [out] - pointer to a connection Id
- *     This parameter cannot be a null pointer.
- * @param npeVcIdPtr @ref IxAtmNpeRxVcId [out] - pointer to an npe Vc Id
- *     This parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS successful call to IxAtmdAccRxVcConnect
- * @return @li IX_ATMDACC_BUSY cannot process this request :
- *         no VC is available
- * @return @li IX_FAIL
- *             parameter error,
- *             VC already in use,
- *             attempt to connect AAL service on reserved OAM VPI/VCI,
- *             attempt to connect OAM service on VPI/VCI other than the reserved OAM VPI/VCI,
- *             port is not initialised,
- *             or some other error occurs during processing.
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxVcConnect (IxAtmLogicalPort port,
-                      unsigned int vpi,
-                      unsigned int vci,
-                      IxAtmdAccAalType aalServiceType,
-                      IxAtmRxQueueId rxQueueId,
-                      IxAtmdAccUserId userCallbackId,
-                      IxAtmdAccRxVcRxCallback rxCallback,
-                      unsigned int minimumReplenishCount,
-                      IxAtmConnId * connIdPtr,
-                      IxAtmNpeRxVcId * npeVcIdPtr );
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- * 
- * @fn ixAtmdAccRxVcFreeReplenish (IxAtmConnId connId,
-                        IX_OSAL_MBUF * mbufPtr)
- *
- * @brief Provide free mbufs for data reception on a connection.
- *
- * This function provides mbufs for data reception by the hardware. This
- * function needs to be called by the user on a regular basis to ensure
- * no packet loss. Providing free buffers is a connection-based feature;
- * each connection can have different requirements in terms of buffer size
- * number of buffers, recycling rate. This function could be invoked from
- * within the context of a @a IxAtmdAccRxVcFreeLowCallback() callback
- * for a particular VC
- *
- * Mbufs provided through this function call can be chained. They will be
- * unchained internally. A call to this function with chained mbufs or
- * multiple calls with unchained mbufs are equivalent, but calls with
- * unchained mbufs are more efficients.
- *
- * Mbufs provided to this interface need to be able to hold at least one
- * full cell payload (48/52 bytes, depending on service type).
- * Chained buffers with a size less than the size supported by the hardware
- * will be returned through the rx callback provided during the connect step.
- *
- * Failing to invoke this function prior to enabling the RX traffic
- * can result in packet loss.
- *
- * This function is not reentrant for the same connId.
- *
- * This function does not use system resources and can be
- * invoked from an interrupt context.
- *
- * @note - Over replenish is detected, and extra mbufs are returned through
- *         the rx callback provided during the connect step.
- *
- * @note - Mbuf provided to the replenish function should have a length greater or
- *         equal to 48/52 bytes according to service type.
- *
- * @note - The memory cache of mMbuf payload should be invalidated prior to Mbuf
- *         submission. Flushing the Mbuf headers is handled by IxAtmdAcc.
- *
- * @note - When a chained mbuf is provided, this function process the mbufs
- *         up to the hardware limit and invokes the user-supplied callback
- *         to release extra buffers.
- *
- * @sa ixAtmdAccRxVcFreeLowCallbackRegister
- * @sa IxAtmdAccRxVcFreeLowCallback
- * @sa ixAtmdAccRxVcConnect
- *
- * @param connId @ref IxAtmConnId [in] - connection Id as returned from a succesfull call to
- *        @a IxAtmdAccRxVcConnect()
- * @param mbufPtr @ref IX_OSAL_MBUF [in] - pointer to a mbuf structure to be used for data
- *        reception. The mbuf pointed to by this parameter can be chained
- *        to an other mbuf.
- *
- * @return @li IX_SUCCESS successful call to @a ixAtmdAccRxVcFreeReplenish()
- *          and the mbuf is now ready to use for incoming traffic.
- * @return @li IX_ATMDACC_BUSY cannot process this request because
- *         the max number of outstanding free buffers has been reached
- *         or the internal resources have exhausted for this VC.
- *         The user is responsible for retrying this request later.
- * @return @li IX_FAIL cannot process this request because of parameter
- *         errors or some unspecified internal error has occurred.
- *
- * @note - It is not always guaranteed the replenish step to be as fast as the
- *   hardware is consuming Rx Free mbufs. There is nothing in IxAtmdAcc to
- *   guarantee that replenish reaches the rxFree threshold level. If the
- *   threshold level is not reached, the next rxFree low notification for
- *   this channel will not be triggered.
- *   The preferred ways to replenish can be as follows (depending on
- *   applications and implementations) :
- *   @li Replenish in a rxFree low notification until the function
- *       ixAtmdAccRxVcFreeReplenish() returns IX_ATMDACC_BUSY
- *   @li Query the queue level using @sa ixAtmdAccRxVcFreeEntriesQuery, then
- *     , replenish using @a ixAtmdAccRxVcFreeReplenish(), then query the queue
- *       level again, and replenish if the threshold is still not reached.
- *   @li Trigger replenish from an other event source and use rxFree starvation
- *       to throttle the Rx traffic.
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxVcFreeReplenish (IxAtmConnId connId,
-                        IX_OSAL_MBUF * mbufPtr);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- * 
- * @fn ixAtmdAccRxVcFreeLowCallbackRegister (IxAtmConnId connId,
-                                    unsigned int numberOfMbufs,
-                                    IxAtmdAccRxVcFreeLowCallback callback)
- *
- * @brief Configure the RX Free threshold value and register a callback
- * to handle threshold notifications.
- *
- * The function ixAtmdAccRxVcFreeLowCallbackRegister sets the threshold value for
- * a particular RX VC. When the number of buffers reaches this threshold
- * the callback is invoked.
- *
- * This function should be called once per VC before RX traffic is
- * enabled.This function will fail if the curent level of the free buffers
- * is equal or less than the threshold value.
- *
- * @sa ixAtmdAccRxVcFreeLowCallbackRegister
- * @sa IxAtmdAccRxVcFreeLowCallback
- * @sa ixAtmdAccRxVcFreeReplenish
- * @sa ixAtmdAccRxVcFreeEntriesQuery
- * @sa ixAtmdAccRxVcConnect
- *
- * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call
- *        to @a IxAtmdAccRxVcConnect()
- * @param numberOfMbufs unsigned int [in] - threshold number of buffers. This number
- *        has to be a power of 2, one of the values 0,1,2,4,8,16,32....
- *        The maximum value cannot be more than half of the rxFree queue
- *        size (which can be retrieved using @a ixAtmdAccRxVcFreeEntriesQuery()
- *        before any use of the @a ixAtmdAccRxVcFreeReplenish() function)
- * @param callback @ref IxAtmdAccRxVcFreeLowCallback [in] - function telling the user that the number of
- *        free buffers has reduced to the threshold value.
- *
- * @return @li IX_SUCCESS Threshold set successfully.
- * @return @li IX_FAIL parameter error or the current number of free buffers
- *              is less than or equal to the threshold supplied or some
- *              unspecified error has occrred.
- *
- * @note - the callback will be called when the threshold level will drop from
- *        exactly (numberOfMbufs + 1) to (numberOfMbufs).
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxVcFreeLowCallbackRegister (IxAtmConnId connId,
-    unsigned int numberOfMbufs,
-    IxAtmdAccRxVcFreeLowCallback callback);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @fn ixAtmdAccRxVcFreeEntriesQuery (IxAtmConnId connId,
-                         unsigned int *numberOfMbufsPtr)
- *
- * @brief Get the number of rx mbufs the system can accept to replenish the
- *       the rx reception mechanism on a particular channel
- *
- * The ixAtmdAccRxVcFreeEntriesQuery function is used to retrieve the current
- * number of available mbuf entries for reception, on a per-VC basis. This
- * function can be used to know the number of mbufs which can be provided
- * using @a ixAtmdAccRxVcFreeReplenish().
- *
- * This function can be used from a timer context, or can be associated
- * with a threshold event, or can be used inside an active polling
- * mechanism which is under user control.
- *
- * This function is reentrant and does not use system resources and can
- * be invoked from an interrupt context.
- *
- * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call
- *        to @a IxAtmdAccRxVcConnect()
- * @param numberOfMbufsPtr unsigned int [out] - Pointer to the number of available entries.
- *      . This parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS the current number of mbufs not yet used for incoming traffic
- * @return @li IX_FAIL invalid parameter
- *
- * @sa ixAtmdAccRxVcFreeReplenish
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxVcFreeEntriesQuery (IxAtmConnId connId,
-                         unsigned int *numberOfMbufsPtr);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @fn ixAtmdAccRxVcEnable (IxAtmConnId connId)
- *
- * @brief Start the RX service on a VC.
- *
- * This functions kicks-off the traffic reception for a particular VC.
- * Once invoked, incoming PDUs will be made available by the hardware
- * and are eventually directed to the @a IxAtmdAccRxVcRxCallback() callback
- * registered for the connection.
- *
- * If the traffic is already running, this function returns IX_SUCCESS.
- * This function can be invoked many times.
- *
- * IxAtmdAccRxVcFreeLowCallback event will occur only after
- * @a ixAtmdAccRxVcEnable() function is invoked.
- *
- * Before using this function, the @a ixAtmdAccRxVcFreeReplenish() function
- * has to be used to replenish the RX Free queue. If not, incoming traffic
- * may be discarded.and in the case of interrupt driven reception the
- * @a IxAtmdAccRxVcFreeLowCallback() callback may be invoked as a side effect
- * during a replenish action.
- *
- * This function is not reentrant and should not be used inside an
- * interrupt context.
- *
- * For an VC connection this function can be called after a call to
- * @a ixAtmdAccRxVcDisable() and should not be called after
- * @a ixAtmdAccRxVcTryDisconnect()
- *
- * @sa ixAtmdAccRxVcDisable
- * @sa ixAtmdAccRxVcConnect
- * @sa ixAtmdAccRxVcFreeReplenish
- *
- * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call
- * to @a IxAtmdAccRxVcConnect()
- *
- * @return @li IX_SUCCESS successful call to ixAtmdAccRxVcEnable
- * @return @li IX_ATMDACC_WARNING the channel is already enabled
- * @return @li IX_FAIL invalid parameters or some unspecified internal
- *         error occured.
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxVcEnable (IxAtmConnId connId);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- * 
- * @fn ixAtmdAccRxVcDisable (IxAtmConnId connId)
- *
- * @brief Stop the RX service on a VC.
- *
- * This functions stops the traffic reception for a particular VC connection.
- *
- * Once invoked, incoming Pdus are discarded by the hardware. Any Pdus
- * pending will be freed to the user
- *
- * Hence once this function returns no more receive callbacks will be
- * called for that VC. However, buffer free callbacks will be invoked
- * until such time as all buffers supplied by the user have been freed
- * back to the user
- *
- * Calling this function doe not invalidate the connId.
- * @a ixAtmdAccRxVcEnable() can be invoked to enable Pdu reception again.
- *
- * If the traffic is already stopped, this function returns IX_SUCCESS.
- *
- * This function is not reentrant and should not be used inside an
- * interrupt context.
- *
- * @sa ixAtmdAccRxVcConnect
- * @sa ixAtmdAccRxVcEnable
- * @sa ixAtmdAccRxVcDisable
- *
- * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to @a
- *     IxAtmdAccRxVcConnect()
- *
- * @return @li IX_SUCCESS successful call to @a ixAtmdAccRxVcDisable().
- * @return @li IX_ATMDACC_WARNING the channel is already disabled
- * @return @li IX_FAIL invalid parameters or some unspecified internal error occured
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxVcDisable (IxAtmConnId connId);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- * 
- * @fn ixAtmdAccRxVcTryDisconnect (IxAtmConnId connId)
- *
- * @brief Disconnect a VC from the RX service.
- *
- * This function deregisters the VC and guarantees that all resources
- * associated with this VC are free. After its execution, the connection
- * Id is not available.
- *
- * This function will fail until such time as all resources allocated to
- * the VC connection have been freed. The user is responsible to delay and
- * call again this function many times until a success status is returned.
- *
- * This function needs internal locks and should not be called from an
- * interrupt context
- *
- * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to
- * @a IxAtmdAccRxVcConnect()
- *
- * @return @li IX_SUCCESS successful call to ixAtmdAccRxVcDisable
- * @return @li IX_ATMDACC_RESOURCES_STILL_ALLOCATED not all resources
- *         associated with the connection have been freed.
- * @return @li IX_FAIL cannot process this request because of a parameter
- *         error
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxVcTryDisconnect (IxAtmConnId connId);
-
-/* ------------------------------------------------------
-   Part of the IxAtmdAcc interface related to TX traffic
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- * 
- * @fn ixAtmdAccTxVcConnect (IxAtmLogicalPort port,
-                      unsigned int vpi,
-                      unsigned int vci,
-                      IxAtmdAccAalType aalServiceType,
-                      IxAtmdAccUserId userId,
-                      IxAtmdAccTxVcBufferReturnCallback bufferFreeCallback,
-                      IxAtmConnId * connIdPtr)
- *
- * @brief Connect to a Aal Pdu transmit service for a particular
- *        port/vpi/vci and service type.
- *
- * This function allows a user to connect to an Aal5/Aal0/OAM Pdu transmit service
- * for a particular port/vpi/vci. It registers the callback and allocates
- * internal resources and a Connection Id to be used in further API calls
- * related to this VC.
- *
- * The function will setup VC transmit service on the specified on the
- * specified port. A connId is the reference by which IxAtmdAcc refers to a
- * connected VC. This identifier is the result of a succesful call
- * to a connect function. This identifier is invalid after a
- * sucessful call to a disconnect function.
- *
- * This function needs internal locks, and hence  should not be called
- * from an interrupt context.
- *
- * On return from @a ixAtmdAccTxVcConnect() with a failure status, the
- * connection Id parameter is unspecified. Its value cannot be used.
- *
- * Calling this function for the same combination of port, Vpi, Vci and
- * more than once without calling @a ixAtmdAccTxVcTryDisconnect() will result
- * in a failure status.
- *
- * Two AAL0 services supporting 48 or 52 byte cell data are provided.
- * Submitted AAL0 PDUs must be a multiple of the cell data size (48/52).
- * AAL0_52 is a raw cell service the client must format
- * the PDU with an ATM cell header (excluding HEC) at the start of
- * each cell, note that AtmdAcc does not validate the cell headers in
- * a submitted PDU.
- *
- * For the OAM service an "OAM Tx channel" may be enabled for a port
- * by establishing a single dedicated OAM Tx connection on that port.
- *
- * The OAM service allows buffers containing 52 byte OAM F4/F5 cells
- * to be transmitted and received over the dedicated OAM channels.
- * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM
- * service offered by AtmdAcc is a raw cell transport service.
- * It is assumed that ITU I.610 procedures that make use of this
- * service are implemented above AtmdAcc.
- *
- * Note that the dedicated OAM connections are established on
- * reserved VPI,VCI, and (in the case of Rx) port values.
- * These values are used purely to descriminate the dedicated OAM channels
- * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be
- * realised for particluar VPI/VCIs by manipulating the VPI,VCI
- * fields of the ATM cell headers of cells in the buffers passed
- * to AtmdAcc.
- *
- * Calling this function before enabling the port will fail.
- *
- * @sa ixAtmdAccTxVcTryDisconnect
- * @sa ixAtmdAccPortTxScheduledModeEnable
- * @sa ixAtmdAccPortEnable
- *
- * @param port @ref IxAtmLogicalPort [in] - VC identification : logical PHY port
- *                  [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
- * @param vpi unsigned int  [in] - VC identification : ATM Vpi [0..255] or IX_ATMDACC_OAM_VPI
- * @param vci unsigned int [in] - VC identification : ATM Vci [0..65535] or IX_ATMDACC_OAM_VCI
- * @param aalServiceType @ref IxAtmdAccAalType [in] - type of service AAL5, AAL0_48, AAL0_52, or OAM
- * @param userId @ref IxAtmdAccUserId [in] - user id to be used later during callbacks related
- *        to this channel
- * @param bufferFreeCallback @ref IxAtmdAccTxVcBufferReturnCallback [in] - function called when mbufs
- *        transmission is complete. This parameter cannot be a null
- *        pointer.
- * @param connIdPtr @ref IxAtmConnId [out] - Pointer to a connection Id.
- *        This parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS successful call to @a IxAtmdAccRxVcConnect().
- * @return @li IX_ATMDACC_BUSY cannot process this request
- *         because no VC is available
- * @return @li IX_FAIL
- *             parameter error,
- *             VC already in use,
- *             attempt to connect AAL service on reserved OAM VPI/VCI,
- *             attempt to connect OAM service on VPI/VCI other than the reserved OAM VPI/VCI,
- *             port is not initialised,
- *             or some other error occurs during processing.
- *
- * @note - Unscheduled mode is not supported in ixp425 1.0. Therefore, the
- *       function @a ixAtmdAccPortTxScheduledModeEnable() need to be called
- *       for this port before any establishing a Tx Connection
- */
-PUBLIC IX_STATUS ixAtmdAccTxVcConnect (IxAtmLogicalPort port,
-                      unsigned int vpi,
-                      unsigned int vci,
-                      IxAtmdAccAalType aalServiceType,
-                      IxAtmdAccUserId userId,
-                      IxAtmdAccTxVcBufferReturnCallback bufferFreeCallback,
-                      IxAtmConnId * connIdPtr);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @fn ixAtmdAccTxVcPduSubmit (IxAtmConnId connId,
-                    IX_OSAL_MBUF * mbufPtr,
-                    IxAtmdAccClpStatus clp,
-                    unsigned int numberOfCells)
- *
- * @brief Submit a Pdu for transmission on connection.
- *
- * A data user calls this function to submit an mbufs containing a Pdu
- * to be transmitted. The buffer supplied can be chained and the Pdu it
- * contains must be complete.
- *
- * The transmission behavior of this call depends on the operational mode
- * of the port on which the connection is made.
- *
- * In unscheduled mode the mbuf will be submitted to the hardware
- * immediately if sufficent resource is available. Otherwise the function
- * will return failure.
- *
- * In scheduled mode the buffer is queued internally in IxAtmdAcc. The cell
- * demand is made known to the traffic shaping entity. Cells from the
- * buffers are MUXed onto the port some time later as dictated by the
- * traffic shaping entity. The traffic shaping entity does this by sending
- * transmit schedules to IxAtmdAcc via @a ixAtmdAccPortTxProcess() function call.
- *
- * Note that the dedicated OAM channel is scheduled just like any
- * other channel. This means that any OAM traffic relating to an
- * active AAL0/AAL5 connection will be scheduled independantly of the
- * AAL0/AAL5 traffic for that connection.
- *
- * When transmission is complete, the TX Done mechanism will give the
- * owmnership of these buffers back to the customer. The tx done mechanism
- * must be in operation before transmission is attempted.
- *
- * For AAL0/OAM submitted AAL0 PDUs must be a multiple of the cell data
- * size (48/52). AAL0_52 and OAM are raw cell services, and the client
- * must format the PDU with an ATM cell header (excluding HEC) at the
- * start of each cell, note that AtmdAcc does not validate the cell headers in
- * a submitted PDU.
- *
- *
- * @sa IxAtmdAccTxVcBufferReturnCallback
- * @sa ixAtmdAccTxDoneDispatch
- *
- * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to
- *        @a ixAtmdAccTxVcConnect()
- * @param mbufPtr @ref IX_OSAL_MBUF [in] - pointer to a chained structure of mbufs to transmit.
- *       This parameter cannot be a null pointer.
- * @param clp @ref IxAtmdAccClpStatus [in] - clp indication for this PDU. All cells of this pdu
- *       will be sent with the clp bit set
- * @param numberOfCells unsigned int [in] - number of cells in the PDU.
- *
- * @return @li IX_SUCCESS successful call to @a ixAtmdAccTxVcPduSubmit()
- *             The pdu pointed by the mbufPtr parameter will be
- *             transmitted
- * @return @li IX_ATMDACC_BUSY unable to process this request because
- *             internal resources are all used. The caller is responsible
- *             for retrying this request later.
- * @return @li IX_FAIL unable to process this request because of error
- *             in the parameters (wrong connId supplied,
- *             or wrong mbuf pointer supplied), the total length of all buffers
- *             in the chain should be a multiple of the cell size
- *             ( 48/52 depending on the service type ),
- *             or unspecified error during processing
- *
- * @note - This function in not re-entrant for the same VC (e.g. : two
- *         thread cannot send PDUs for the same VC). But two threads can
- *         safely call this function with a different connection Id
- *
- * @note - In unscheduled mode, this function is not re-entrant on a per
- *         port basis. The size of pdus is limited to 8Kb.
- *
- * @note - 0-length mbufs should be removed from the chain before submission.
- *         The total length of the pdu (sdu + padding +trailer) has to be
- *         updated in the header of the first mbuf of a chain of mbufs.
- *
- * @note - Aal5 trailer information (UUI, CPI, SDU length) has to be supplied
- *         before submission.
- *
- * @note - The payload memory cache should be flushed, if needed, prior to
- *         transmission. Mbuf headers are flushed by IxAtmdAcc
- *
- * @note - This function does not use system resources and can be used
- *         inside an interrupt context
- */
-PUBLIC IX_STATUS ixAtmdAccTxVcPduSubmit (IxAtmConnId connId,
-                    IX_OSAL_MBUF * mbufPtr,
-                    IxAtmdAccClpStatus clp,
-                    unsigned int numberOfCells);
-
-/**
- *
- * @ingroup IxAtmdAccAPI
- *
- * @fn ixAtmdAccTxVcTryDisconnect (IxAtmConnId connId)
- *
- * @brief Disconnect from a Aal Pdu transmit service for a particular
- *        port/vpi/vci.
- *
- * This function deregisters the VC and guarantees that all resources
- * associated with this VC are free. After its execution, the connection
- * Id is not available.
- *
- * This function will fail until such time as all resources allocated to
- * the VC connection have been freed. The user is responsible to delay
- * and call again this function many times until a success status is
- * returned.
- *
- * After its execution, the connection Id is not available.
- *
- * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to
- *        @a ixAtmdAccTxVcConnect()
- *
- * @return @li IX_SUCCESS successful call to @a ixAtmdAccTxVcTryDisconnect()
- * @return @li IX_ATMDACC_RESOURCES_STILL_ALLOCATED not all resources
- *     associated with the connection have been freed. This condition will
- *     disappear after Tx and TxDone is complete for this channel.
- * @return @li IX_FAIL unable to process this request because of errors
- *                     in the parameters (wrong connId supplied)
- *
- * @note - This function needs internal locks and should not be called
- *         from an interrupt context
- *
- * @note - If the @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED error does not
- *     clear after a while, this may be linked to a previous problem
- *     of cell overscheduling. Diabling the port and retry a disconnect
- *     will free the resources associated with this channel.
- *
- * @sa ixAtmdAccPortTxProcess
- *
- */
-PUBLIC IX_STATUS ixAtmdAccTxVcTryDisconnect (IxAtmConnId connId);
-
-#endif /* IXATMDACC_H */
-
-/**
- * @} defgroup IxAtmdAccAPI
- */
-
-
diff --git a/drivers/net/npe/include/IxAtmdAccCtrl.h b/drivers/net/npe/include/IxAtmdAccCtrl.h
deleted file mode 100644
index ecbb005..0000000
--- a/drivers/net/npe/include/IxAtmdAccCtrl.h
+++ /dev/null
@@ -1,1933 +0,0 @@
-/**
- * @file    IxAtmdAccCtrl.h
- *
- * @date    20-Mar-2002
- *
- * @brief IxAtmdAcc Public API
- *
- * This file contains the public API of IxAtmdAcc, related to the
- * control functions of the component.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/* ------------------------------------------------------
-   Doxygen group definitions
-   ------------------------------------------------------ */
-
-/**
- *
- * @defgroup IxAtmdAccCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Control API
- *
- * @brief The public API for the IXP400 Atm Driver Control component
- *
- * IxAtmdAcc is the low level interface by which AAL PDU get transmitted
- * to,and received from the Utopia bus
- *
- * This part is related to the Control configuration
- *
- * @{
- */
-
-#ifndef IXATMDACCCTRL_H
-#define IXATMDACCCTRL_H
-
-#include "IxAtmdAcc.h"
-
-/* ------------------------------------------------------
-   AtmdAccCtrl Data Types definition
-   ------------------------------------------------------ */
-
-/**
-*
-* @ingroup IxAtmdAccCtrlAPI
-*
-* @def IX_ATMDACC_PORT_DISABLE_IN_PROGRESS
-*
-* @brief Port enable return code
-*
-* This constant is used to tell IxAtmDAcc user that the port disable
-* functions are not complete. The user can call ixAtmdAccPortDisableComplete()
-* to find out when the disable has finished. The port enable can then proceed.
-*
-*/
-#define IX_ATMDACC_PORT_DISABLE_IN_PROGRESS 5
-
-/**
-*
-* @ingroup IxAtmdAccCtrlAPI
-*
-* @def IX_ATMDACC_ALLPDUS
-*
-* @brief All PDUs
-*
-* This constant is used to tell IxAtmDAcc to process all PDUs from
-* the RX queue or the TX Done
-*
-* @sa IxAtmdAccRxDispatcher
-* @sa IxAtmdAccTxDoneDispatcher
-*
-*/
-#define IX_ATMDACC_ALLPDUS 0xffffffff
-
-/* ------------------------------------------------------
-   Part of the IxAtmdAcc interface related to RX traffic
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @brief Callback prototype for notification of available PDUs for
- * an Rx Q.
- *
- * This a protoype for a function which is called when there is at
- * least one Pdu available for processing on a particular Rx Q.
- *
- * This function should call @a ixAtmdAccRxDispatch() with
- * the aprropriate number of parameters to read and process the Rx Q.
- *
- * @sa ixAtmdAccRxDispatch
- * @sa ixAtmdAccRxVcConnect
- * @sa ixAtmdAccRxDispatcherRegister
- *
- * @param rxQueueId @ref IxAtmRxQueueId [in] indicates which RX queue to has Pdus to process.
- * @param numberOfPdusToProcess unsigned int [in] indicates the minimum number of
- *        PDUs available to process all PDUs from the queue.
- * @param reservedPtr unsigned int* [out] pointer to a int location which can
- *        be written to, but does not retain written values. This is
- *        provided to make this prototype compatible
- *        with @a ixAtmdAccRxDispatch()
- *
- * @return @li int - ignored.
- *
- */
-typedef IX_STATUS (*IxAtmdAccRxDispatcher) (IxAtmRxQueueId rxQueueId,
-                         unsigned int numberOfPdusToProcess,
-                         unsigned int *reservedPtr);
-
-/* ------------------------------------------------------
-   Part of the IxAtmdAcc interface related to TX traffic
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @brief Callback prototype for transmitted mbuf when threshold level is
- *        crossed.
- *
- * IxAtmdAccTxDoneDispatcher is the prototype of the user function
- * which get called when pdus are completely transmitted. This function
- * is likely to call the @a ixAtmdAccTxDoneDispatch() function.
- *
- * This function is called when the number of available pdus for
- * reception is crossing the threshold level as defined
- * in @a ixAtmdAccTxDoneDispatcherRegister()
- *
- * This function is called inside an Qmgr dispatch context. No system
- * resource or interrupt-unsafe feature should be used inside this
- * callback.
- *
- * Transmitted buffers recycling implementation is a sytem-wide mechanism
- * and needs to be set before any traffic is started. If this threshold
- * mechanism is not used, the user is responsible for polling the
- * transmitted buffers with @a ixAtmdAccTxDoneDispatch()
- * and @a ixAtmdAccTxDoneLevelQuery() functions.
- *
- * @sa ixAtmdAccTxDoneDispatcherRegister
- * @sa ixAtmdAccTxDoneDispatch
- * @sa ixAtmdAccTxDoneLevelQuery
- *
- * @param numberOfPdusToProcess unsigned int [in] - The current number of pdus currently
- *        available for recycling
- * @param *reservedPtr unsigned int [out] - pointer to a int location which can be
- *        written to but does not retain written values. This is provided
- *        to make this prototype compatible
- *        with @a ixAtmdAccTxDoneDispatch()
- *
- * @return @li IX_SUCCESS This is provided to make
- *    this prototype compatible with @a ixAtmdAccTxDoneDispatch()
- * @return @li IX_FAIL invalid parameters or some unspecified internal
- *    error occured. This is provided to make
- *    this prototype compatible with @a ixAtmdAccTxDoneDispatch()
- *
- */
-typedef IX_STATUS (*IxAtmdAccTxDoneDispatcher) (unsigned int numberOfPdusToProcess,
-                                                unsigned int *reservedPtr);
-
-/**
-*
-* @ingroup IxAtmdAccCtrlAPI
-*
-* @brief Notification that the threshold number of scheduled cells
-* remains in a port's transmit Q.
-*
-* The is the prototype for of the user notification function which
-* gets called on a per-port basis, when the number of remaining
-* scheduled cells to be transmitted decreases to the threshold level.
-* The number of cells passed as a parameter can be used for scheduling
-* purposes as the maximum number of cells that can be passed in a
-* schedule table to the @a ixAtmdAccPortTxProcess() function.
-*
-* @sa ixAtmdAccPortTxCallbackRegister
-* @sa ixAtmdAccPortTxProcess
-* @sa ixAtmdAccPortTxFreeEntriesQuery
-*
-* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
-* @param numberOfAvailableCells unsigned int [in] - number of available
-*        cell entries.for the port
-*
-* @note - This functions shall not use system resources when used
-*         inside an interrupt context.
-*
-*/
-typedef void (*IxAtmdAccPortTxLowCallback) (IxAtmLogicalPort port,
-                           unsigned int numberOfAvailableCells);
-
-/**
-*
-* @ingroup IxAtmdAccCtrlAPI
-*
-* @brief  Prototype to submit cells for transmission
-*
-* IxAtmdAccTxVcDemandUpdateCallback is the prototype of the callback
-* function used by AtmD to notify an ATM Scheduler that the user of
-* a VC has submitted cells for transmission.
-*
-* @sa IxAtmdAccTxVcDemandUpdateCallback
-* @sa IxAtmdAccTxVcDemandClearCallback
-* @sa IxAtmdAccTxSchVcIdGetCallback
-* @sa ixAtmdAccPortTxScheduledModeEnable
-*
-* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be updated
-*        is established
-* @param vcId int [in] - Identifies the VC to be updated. This is the value
-*        returned by the @a IxAtmdAccTxSchVcIdGetCallback() call .
-* @param numberOfCells unsigned int [in] - Indicates how many ATM cells should be added
-*        to the queue for this VC.
-*
-* @return @li IX_SUCCESS the function is registering the cell demand for
-*        this VC.
-* @return @li IX_FAIL the function cannot register cell for this VC : the
-*         scheduler maybe overloaded or misconfigured
-*
-*/
-typedef IX_STATUS (*IxAtmdAccTxVcDemandUpdateCallback) (IxAtmLogicalPort port,
-                        int vcId,
-                        unsigned int numberOfCells);
-
-/**
-*
-* @ingroup IxAtmdAccCtrlAPI
-*
-* @brief  prototype to  remove all currently queued cells from a
-* registered VC
-*
-* IxAtmdAccTxVcDemandClearCallback is the prototype of the function
-* to remove all currently queued cells from a registered VC. The
-* pending cell count for the specified VC is reset to zero. After the
-* use of this callback, the scheduler shall not schedule more cells
-* for this VC.
-*
-* This callback function is called during a VC disconnection
-* @a ixAtmdAccTxVcTryDisconnect()
-*
-* @sa IxAtmdAccTxVcDemandUpdateCallback
-* @sa IxAtmdAccTxVcDemandClearCallback
-* @sa IxAtmdAccTxSchVcIdGetCallback
-* @sa ixAtmdAccPortTxScheduledModeEnable
-* @sa ixAtmdAccTxVcTryDisconnect
-*
-* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be cleared
-*        is established
-* @param vcId int [in] - Identifies the VC to be cleared. This is the value
-*        returned by the @a IxAtmdAccTxSchVcIdGetCallback() call .
-*
-* @return none
-*
-*/
-typedef void (*IxAtmdAccTxVcDemandClearCallback) (IxAtmLogicalPort port,
-                             int vcId);
-
-/**
-*
-* @ingroup IxAtmdAccCtrlAPI
-*
-* @brief  prototype to get a scheduler vc id
-*
-* IxAtmdAccTxSchVcIdGetCallback is the prototype of the function to get
-* a scheduler vcId
-*
-* @sa IxAtmdAccTxVcDemandUpdateCallback
-* @sa IxAtmdAccTxVcDemandClearCallback
-* @sa IxAtmdAccTxSchVcIdGetCallback
-* @sa ixAtmdAccPortTxScheduledModeEnable
-*
-* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM logical port on which the VC is
-*        established
-* @param vpi unsigned int [in] - For AAL0/AAL5 specifies the ATM vpi on which the 
-*                 VC is established.
-*                 For OAM specifies the dedicated "OAM Tx channel" VPI.
-* @param vci unsigned int [in] - For AAL0/AAL5 specifies the ATM vci on which the 
-*                 VC is established.
-*                 For OAM specifies the dedicated "OAM Tx channel" VCI.
-* @param connId @ref IxAtmConnId [in] - specifies the IxAtmdAcc connection Id already
-*        associated with this VC
-* @param vcId int* [out] - pointer to a vcId
-*
-* @return @li IX_SUCCESS the function is returning a Scheduler vcId for this
-*         VC
-* @return @li IX_FAIL the function cannot process scheduling for this VC.
-*                 the contents of vcId is unspecified
-*
-*/
-typedef IX_STATUS (*IxAtmdAccTxSchVcIdGetCallback) (IxAtmLogicalPort port,
-                               unsigned int vpi,
-                               unsigned int vci,
-                               IxAtmConnId connId,
-                               int *vcId);
-
-/* ------------------------------------------------------
-   Part of the IxAtmdAcc interface related to RX traffic
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccRxDispatcherRegister (
-                          IxAtmRxQueueId queueId,
-                          IxAtmdAccRxDispatcher callback)
- *
- * @brief Register a notification callback to be invoked when there is
- * at least one entry on a particular Rx queue.
- *
- * This function registers a callback to be invoked when there is at
- * least one entry in a particular queue. The registered callback is
- * called every time when the hardware adds one or more pdus to the
- * specified Rx queue.
- *
- * This function cannot be used when a Rx Vc using this queue is
- * already existing.
- *
- * @note -The callback function can be the API function
- *       @a ixAtmdAccRxDispatch() : every time the threhold level
- *       of the queue is reached, the ixAtmdAccRxDispatch() is
- *       invoked to remove all entries from the queue.
- *
- * @sa ixAtmdAccRxDispatch
- * @sa IxAtmdAccRxDispatcher
- *
- * @param queueId @ref IxAtmRxQueueId [in] RX queue identification
- * @param callback @ref IxAtmdAccRxDispatcher [in] function triggering the delivery of incoming
- *        traffic. This parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS Successful call to @a ixAtmdAccRxDispatcherRegister()
- * @return @li IX_FAIL error in the parameters, or there is an
- *             already active RX VC for this queue or some unspecified
- *             internal error occurred.
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxDispatcherRegister (
-                          IxAtmRxQueueId queueId,
-                          IxAtmdAccRxDispatcher callback);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId,
-    unsigned int numberOfPdusToProcess,
-    unsigned int *numberOfPdusProcessedPtr)
- *
- *
- * @brief Control function which executes Rx processing for a particular
- * Rx stream.
- *
- * The @a IxAtmdAccRxDispatch() function is used to process received Pdus
- * available from one of the two incoming RX streams. When this function
- * is invoked, the incoming traffic (up to the number of PDUs passed as
- * a parameter) will be transferred to the IxAtmdAcc users through the
- * callback @a IxAtmdAccRxVcRxCallback(), as registered during the
- * @a ixAtmdAccRxVcConnect() call.
- *
- * The user receive callbacks will be executed in the context of this
- * function.
- *
- * Failing to use this function on a regular basis when there is traffic
- * will block incoming traffic and can result in Pdus being dropped by
- * the hardware.
- *
- * This should be used to control when received pdus are handed off from
- * the hardware to Aal users from a particluar stream. The function can
- * be used from a timer context, or can be registered as a callback in
- * response to an rx stream threshold event, or can be used inside an
- * active polling mechanism which is under user control.
- *
- * @note - The signature of this function is directly compatible with the
- * callback prototype which can be register with @a ixAtmdAccRxDispatcherRegister().
- *
- * @sa ixAtmdAccRxDispatcherRegister
- * @sa IxAtmdAccRxVcRxCallback
- * @sa ixAtmdAccRxVcFreeEntriesQuery
- *
- * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which RX queue to process.
- * @param numberOfPdusToProcess unsigned int [in] - indicates the maxiumum number of PDU to
- *     remove from the RX queue. A value of IX_ATMDACC_ALLPDUS indicates
- *     to process all PDUs from the queue. This includes at least the PDUs
- *     in the queue when the fuction is invoked. Because of real-time
- *     constraints, there is no guarantee thatthe queue will be empty
- *     when the function exits. If this parameter is greater than the
- *     number of entries of the queues, the function will succeed
- *     and the parameter numberOfPdusProcessedPtr will reflect the exact
- *     number of PDUs processed.
- * @param *numberOfPdusProcessedPtr unsigned int [out] - indicates the actual number of PDU
- *     processed during this call. This parameter cannot be a null
- *     pointer.
- *
- * @return @li IX_SUCCESS the number of PDUs as indicated in
- *     numberOfPdusProcessedPtr are removed from the RX queue and the VC callback
- *     are called.
- * @return @li IX_FAIL invalid parameters or some unspecified internal
- *     error occured.
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId,
-    unsigned int numberOfPdusToProcess,
-    unsigned int *numberOfPdusProcessedPtr);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- * 
- * @fn ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId,
-                     unsigned int *numberOfPdusPtr)
- *
- * @brief Query the number of entries in a particular RX queue.
- *
- * This function is used to retrieve the number of pdus received by
- * the hardware and ready for distribution to users.
- *
- * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query.
- * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of available
- *        PDUs in the RX queue. This parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the
- *         number of incoming pdus waiting in this queue
- * @return @li IX_FAIL an error occurs during processing.
- *         The value in numberOfPdusPtr is unspecified.
- *
- * @note - This function is reentrant, doesn't use system resources
- *         and can be used from an interrupt context.
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId,
-                     unsigned int *numberOfPdusPtr);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId,
-                     unsigned int *numberOfPdusPtr)
- *
- * @brief Query the size of a particular RX queue.
- *
- * This function is used to retrieve the number of pdus the system is
- * able to queue when reception is complete.
- *
- * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query.
- * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of pdus
- *         the system is able to queue in the RX queue. This parameter
- *         cannot be a null pointer.
- *
- * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the
- *         number of pdus the system is able to queue.
- * @return @li IX_FAIL an error occurs during processing.
- *         The value in numberOfPdusPtr is unspecified.
- *
- * @note - This function is reentrant, doesn't use system resources
- *         and can be used from an interrupt context.
- *
- */
-PUBLIC IX_STATUS ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId,
-                     unsigned int *numberOfPdusPtr);
-
-/* ------------------------------------------------------
-   Part of the IxAtmdAcc interface related to TX traffic
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port,
-                         unsigned int *numberOfCellsPtr)
- *
- * @brief Get the number of available cells the system can accept for
- *       transmission.
- *
- * The function is used to retrieve the number of cells that can be
- * queued for transmission to the hardware.
- *
- * This number is based on the worst schedule table where one cell
- * is stored in one schedule table entry, depending on the pdus size
- * and mbuf size and fragmentation.
- *
- * This function doesn't use system resources and can be used from a
- * timer context, or can be associated with a threshold event, or can
- * be used inside an active polling mechanism
- *
- * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
- * @param numberOfCellsPtr unsigned int* [out] - number of available cells.
- *                   This parameter cannot be a null pointer.
- *
- * @sa ixAtmdAccPortTxProcess
- *
- * @return @li IX_SUCCESS numberOfCellsPtr contains the number of cells that can be scheduled
- *         for this port.
- * @return @li IX_FAIL error in the parameters, or some processing error
- *         occured.
- *
- */
-PUBLIC IX_STATUS ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port,
-                         unsigned int *numberOfCellsPtr);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- * 
- * @fn ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port,
-                       unsigned int numberOfCells,
-                       IxAtmdAccPortTxLowCallback callback)
- *
- * @brief Configure the Tx port threshold value and register a callback to handle
- * threshold notifications.
- *
- * This function sets the threshold in cells
- *
- * @sa ixAtmdAccPortTxCallbackRegister
- * @sa ixAtmdAccPortTxProcess
- * @sa ixAtmdAccPortTxFreeEntriesQuery
- *
- * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
- * @param numberOfCells unsigned int [in] - threshold value which triggers the callback
- *        invocation, This number has to be one of the
- *        values 0,1,2,4,8,16,32 ....
- *        The maximum value cannot be more than half of the txVc queue
- *        size (which can be retrieved using @a ixAtmdAccPortTxFreeEntriesQuery()
- *        before any Tx traffic is sent for this port)
- * @param callback @ref IxAtmdAccPortTxLowCallback [in] - callback function to invoke when the threshold
- *                 level is reached.
- *                 This parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS Successful call to @a ixAtmdAccPortTxCallbackRegister()
- * @return @li IX_FAIL error in the parameters, Tx channel already set for this port
- *             threshold level is not correct or within the range regarding the
- *             queue size:or unspecified error during processing:
- *
- * @note - This callback function get called when the threshold level drops from
- *         (numberOfCells+1) cells to (numberOfCells) cells
- *
- * @note - This function should be called during system initialisation,
- *         outside an interrupt context
- *
- */
-PUBLIC IX_STATUS ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port,
-                       unsigned int numberOfCells,
-                       IxAtmdAccPortTxLowCallback callback);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port,
-    IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback,
-    IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback,
-    IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback)
- *
- * @brief Put the port into Scheduled Mode
- *
- * This function puts the specified port into scheduled mode of
- * transmission which means an external s/w entity controls the
- * transmission of cells on this port. This faciltates traffic shaping on
- * the port.
- *
- * Any buffers submitted on a VC for this port will be queued in IxAtmdAcc.
- * The transmission of these buffers to and by the hardware will be driven
- * by a transmit schedule submitted regulary in calls to
- * @a ixAtmdAccPortTxProcess() by traffic shaping entity.
- *
- * The transmit schedule is expected to be dynamic in nature based on
- * the demand in cells for each VC on the port. Hence the callback
- * parameters provided to this function allow IxAtmdAcc to inform the
- * shaping entity of demand changes for each VC on the port.
- *
- * By default a port is in Unscheduled Mode so if this function is not
- * called, transmission of data is done without sheduling rules, on a
- * first-come, first-out basis.
- *
- * Once a port is put in scheduled mode it cannot be reverted to
- * un-scheduled mode. Note that unscheduled mode is not supported
- * in ixp425 1.0
- *
- * @note - This function should be called before any VCs have be
- * connected on a port. Otherwise this function call will return failure.
- *
- * @note - This function uses internal locks and should not be called from
- * an interrupt context
- *
- * @sa IxAtmdAccTxVcDemandUpdateCallback
- * @sa IxAtmdAccTxVcDemandClearCallback
- * @sa IxAtmdAccTxSchVcIdGetCallback
- * @sa ixAtmdAccPortTxProcess
- *
- * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
- * @param vcDemandUpdateCallback @ref IxAtmdAccTxVcDemandUpdateCallback [in] - callback function used to update
- *     the number of outstanding cells for transmission. This parameter
- *     cannot be a null pointer.
- * @param vcDemandClearCallback @ref IxAtmdAccTxVcDemandClearCallback [in] - callback function used to remove all
- *     clear the number of outstanding cells for a VC. This parameter
- *     cannot be a null pointer.
- * @param vcIdGetCallback @ref IxAtmdAccTxSchVcIdGetCallback [in] - callback function used to exchange vc
- *     Identifiers between IxAtmdAcc and the entity supplying the
- *     transmit schedule. This parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS scheduler registration is complete and the port
- *         is now in scheduled mode.
- * @return @li IX_FAIL failed (wrong parameters, or traffic is already
- *         enabled on this port, possibly without ATM shaping)
- *
- */
-PUBLIC IX_STATUS ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port,
-    IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback,
-    IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback,
-    IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccPortTxProcess (IxAtmLogicalPort port,
-    IxAtmScheduleTable* scheduleTablePtr)
- *
- * @brief Transmit queue cells to the H/W based on the supplied schedule
- *        table.
- *
- * This function @a ixAtmdAccPortTxProcess() process the schedule
- * table provided as a parameter to the function. As a result cells are
- * sent to the underlaying hardware for transmission.
- *
- * The schedule table is executed in its entirety or not at all. So the
- * onus is on the caller not to submit a table containing more cells than
- * can be transmitted at that point. The maximum numbers that can be
- * transmitted is guaranteed to be the number of cells as returned by the
- * function @a ixAtmdAccPortTxFreeEntriesQuery().
- *
- * When the scheduler is invoked on a threshold level, IxAtmdAcc gives the
- * minimum number of cells (to ensure the callback will fire again later)
- * and the maximum number of cells that @a ixAtmdAccPortTxProcess()
- * will be able to process (assuming the ATM scheduler is able
- * to produce the worst-case schedule table, i.e. one entry per cell).
- *
- * When invoked ouside a threshold level, the overall number of cells of
- * the schedule table should be less than the number of cells returned
- * by the @a ixAtmdAccPortTxFreeEntriesQuery() function.
- *
- * After invoking the @a ixAtmdAccPortTxProcess() function, it is the
- * user choice to query again the queue level with the function
- * @a ixAtmdAccPortTxFreeEntriesQuery() and, depending on a new cell
- * number, submit an other schedule table.
- *
- * IxAtmdAcc will check that the number of cells in the schedule table
- * is compatible with the current transmit level. If the
- *
- * Obsolete or invalid connection Id will be silently discarded.
- *
- * This function is not reentrant for the same port.
- *
- * This functions doesn't use system resources and can be used inside an
- * interrupt context.
- *
- * This function is used as a response to the hardware requesting more
- * cells to transmit.
- *
- * @sa ixAtmdAccPortTxScheduledModeEnable
- * @sa ixAtmdAccPortTxFreeEntriesQuery
- * @sa ixAtmdAccPortTxCallbackRegister
- * @sa ixAtmdAccPortEnable
- *
- * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
- * @param scheduleTablePtr @ref IxAtmScheduleTable* [in] - pointer to a scheduler update table. The
- *     content of this table is not modified by this function. This
- *     parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS the schedule table process is complete
- *             and cells are transmitted to the hardware
- * @return @li IX_ATMDACC_WARNING : Traffic will be dropped: the schedule table exceed
- *     the hardware capacity  If this error is ignored, further traffic
- *     and schedule will work correctly.
- *     Overscheduling does not occur when the schedule table does
- *     not contain more entries that the number of free entries returned
- *     by @a ixAtmdAccPortTxFreeEntriesQuery().
- *     However, Disconnect attempts just after this error will fail permanently
- *     with the error code @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED, and it is
- *     necessary to disable the port to make @a ixAtmdAccTxVcTryDisconnect()
- *     successful.
- * @return @li IX_FAIL a wrong parameter is supplied, or the format of
- *     the schedule table is invalid, or the port is not Enabled, or
- *     an internal severe error occured. No cells is transmitted to the hardware
- *
- * @note - If the failure is linked to an overschedule of data cells
- *     the result is an inconsistency in the output traffic (one or many
- *     cells may be missing and the traffic contract is not respected).
- *
- */
-PUBLIC IX_STATUS ixAtmdAccPortTxProcess (IxAtmLogicalPort port,
-    IxAtmScheduleTable* scheduleTablePtr);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess,
-                unsigned int *numberOfPdusProcessedPtr)
- *
- * @brief Process a number of pending transmit done pdus from the hardware.
- *
- * As a by-product of Atm transmit operation buffers which transmission
- * is complete need to be recycled to users. This function is invoked
- * to service the oustanding list of transmitted buffers and pass them
- * to VC users.
- *
- * Users are handed back pdus by invoking the free callback registered
- * during the @a ixAtmdAccTxVcConnect() call.
- *
- * There is a single Tx done stream servicing all active Atm Tx ports
- * which can contain a maximum of 64 entries. If this stream fills port
- * transmission will stop so this function must be call sufficently
- * frequently to ensure no disruption to the transmit operation.
- *
- * This function can be used from a timer context, or can be associated
- * with a TxDone level threshold event (see @a ixAtmdAccTxDoneDispatcherRegister() ),
- * or can be used inside an active polling mechanism under user control.
- *
- * For ease of use the signature of this function is compatible with the
- * TxDone threshold event callback prototype.
- *
- * This functions can be used inside an interrupt context.
- *
- * @sa ixAtmdAccTxDoneDispatcherRegister
- * @sa IxAtmdAccTxVcBufferReturnCallback
- * @sa ixAtmdAccTxDoneLevelQuery
- *
- * @param numberOfPdusToProcess unsigned int [in] - maxiumum number of pdus to remove
- *     from the TX Done queue
- * @param *numberOfPdusProcessedPtr unsigned int [out] - number of pdus removed from
- *     the TX Done queue. This parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS the number of pdus as indicated in
- *     numberOfPdusToProcess are removed from the TX Done hardware
- *     and passed to the user through the Tx Done callback registered
- *     during a call to @a ixAtmdAccTxVcConnect()
- * @return @li IX_FAIL invalid parameters or numberOfPdusProcessedPtr is
- *     a null pointer or some unspecified internal error occured.
- *
- */
-PUBLIC IX_STATUS
-ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess,
-                unsigned int *numberOfPdusProcessedPtr);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- * 
- * @fn ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr)
- *
- * @brief Query the current number of transmit pdus ready for
- *        recycling.
- *
- * This function is used to get the number of transmitted pdus which
- * the hardware is ready to hand back to user.
- *
- * This function can be used from a timer context, or can be associated
- * with a threshold event, on can be used inside an active polling
- * mechanism
- *
- * @sa ixAtmdAccTxDoneDispatch
- *
- * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus transmitted
- *        at the time of this function call, and ready for recycling
- *        This parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS numberOfPdusPtr contains the number of pdus
- *        ready for recycling at the time of this function call
- *
- * @return @li IX_FAIL wrong parameter (null pointer as parameter).or
- *         unspecified rocessing error occurs..The value in numberOfPdusPtr
- *         is unspecified.
- *
- */
-PUBLIC IX_STATUS
-ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr)
- *
- * @brief Query the TxDone queue size.
- *
- * This function is used to get the number of pdus which
- * the hardware is able to store after transmission is complete
- *
- * The returned value can be used to set a threshold and enable
- * a callback to be notified when the number of pdus is going over
- * the threshold.
- *
- * @sa ixAtmdAccTxDoneDispatcherRegister
- *
- * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus the system
- *        is able to queue after transmission
- *
- * @return @li IX_SUCCESS numberOfPdusPtr contains the the number of
- *        pdus the system is able to queue after transmission
- * @return @li IX_FAIL wrong parameter (null pointer as parameter).or
- *         unspecified rocessing error occurs..The value in numberOfPdusPtr
- *         is unspecified.
- *
- * @note - This function is reentrant, doesn't use system resources
- *         and can be used from an interrupt context.
- */
-PUBLIC IX_STATUS
-ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- * 
- * @fn ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus,
-   IxAtmdAccTxDoneDispatcher notificationCallback)
- *
- * @brief Configure the Tx Done stream threshold value and register a
- * callback to handle threshold notifications.
- *
- * This function sets the threshold level in term of number of pdus at
- * which the supplied notification function should be called.
- *
- * The higher the threshold value is, the less events will be necessary
- * to process transmitted buffers.
- *
- * Transmitted buffers recycling implementation is a sytem-wide mechanism
- * and needs to be set prior any traffic is started. If this threshold
- * mechanism is not used, the user is responsible for polling the
- * transmitted buffers thanks to @a ixAtmdAccTxDoneDispatch() and
- * @a ixAtmdAccTxDoneLevelQuery() functions.
- *
- * This function should be called during system initialisation outside
- * an interrupt context
- *
- * @sa ixAtmdAccTxDoneDispatcherRegister
- * @sa ixAtmdAccTxDoneDispatch
- * @sa ixAtmdAccTxDoneLevelQuery
- *
- * @param numberOfPdus unsigned int [in] - The number of TxDone pdus which triggers the
- *        callback invocation This number has to be a power of 2, one of the
- *        values 0,1,2,4,8,16,32 ...
- *        The maximum value cannot be more than half of the txDone queue
- *        size (which can be retrieved using @a ixAtmdAccTxDoneQueueSizeQuery())
- * @param notificationCallback @ref IxAtmdAccTxDoneDispatcher [in] - The function to invoke. (This
- *        parameter can be @a ixAtmdAccTxDoneDispatch()).This
- *        parameter ust not be a null pointer.
- *
- * @return @li IX_SUCCESS Successful call to ixAtmdAccTxDoneDispatcherRegister
- * @return @li IX_FAIL error in the parameters:
- *
- * @note - The notificationCallback will be called exactly when the threshold level
- *         will increase from (numberOfPdus) to (numberOfPdus+1)
- *
- * @note - If there is no Tx traffic, there is no guarantee that TxDone Pdus will
- *       be released to the user (when txDone level is permanently under the threshold
- *       level. One of the preffered way to return resources to the user is to use
- *       a mix of txDone notifications, used together with a slow
- *       rate timer and an exclusion mechanism protecting from re-entrancy
- *
- * @note - The TxDone threshold will only hand back buffers when the threshold level is
- *      crossed. Setting this threshold to a great number reduce the interrupt rate
- *      and the cpu load, but also increase the number of outstanding mbufs and has
- *      a system wide impact when these mbufs are needed by other components.
- *
- */
-PUBLIC IX_STATUS ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus,
-   IxAtmdAccTxDoneDispatcher notificationCallback);
-
-/* ------------------------------------------------------
-   Part of the IxAtmdAcc interface related to Utopia config
-   ------------------------------------------------------ */
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @defgroup IxAtmdAccUtopiaCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Utopia Control API
- *
- * @brief The public API for the IXP400 Atm Driver Control component
- *
- * IxAtmdAcc is the low level interface by which AAL PDU get
- * transmitted to,and received from the Utopia bus
- *
- * This part is related to the UTOPIA configuration.
- *
- * @{
- */
-
-/**
- *
- * @brief Utopia configuration
- *
- * This structure is used to set the Utopia parameters
- * @li contains the values of Utopia registers, to be set during initialisation
- * @li contains debug commands for NPE, to be used during development steps
- *
- * @note - the exact description of all parameters is done in the Utopia reference
- *   documents.
- *
- */
-typedef struct
-{
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtTxConfig_
-    * @brief Utopia Tx Config Register
-    */
-    struct UtTxConfig_
-    {
-
-    unsigned int reserved_1:1;  /**< [31] These bits are always 0.*/
-    unsigned int txInterface:1;     /**< [30] Utopia Transmit Interface. The following encoding
-                                   * is used to set the Utopia Transmit interface as ATM master
-                                   * or PHY slave:
-                                   * @li 1 - PHY
-                                   * @li 0 - ATM
-                                   */
-    unsigned int txMode:1;      /**< [29] Utopia Transmit Mode. The following encoding is used
-    *  to set the Utopia Transmit mode to SPHY or MPHY:
-    *  @li 1 - SPHY
-    *  @li 0 - MPHY
-    */
-    unsigned int txOctet:1;  /**< [28] Utopia Transmit cell transfer protocol. Used to set
-    * the Utopia cell transfer protocol to Octet-level handshaking.
-    * Note this is only applicable in SPHY mode.
-    * @li 1 - Octet-handshaking enabled
-    * @li 0 - Cell-handshaking enabled
-    */
-    unsigned int txParity:1;    /**< [27] Utopia Transmit parity enabled when set. TxEvenParity
-    * defines the parity format odd/even.
-    * @li 1 - Enable Parity generation.
-    * @li 0 - ut_op_prty held low.
-    */
-    unsigned int txEvenParity:1; /**< [26] Utopia Transmit Parity Mode
-    * @li 1 - Even Parity Generated.
-    * @li 0 - Odd Parity Generated.
-    */
-    unsigned int txHEC:1; /**< [25] Header Error Check Insertion Mode. Specifies if the transmit
-    * cell header check byte is calculated and inserted when set.
-    * @li 1 - Generate HEC.
-    * @li 0 - Disable HEC generation.
-    */
-    unsigned int txCOSET:1;    /**< [24] If enabled the HEC is Exclusive-OR'ed with the value 0x55 before
-  * being presented on the Utopia bus.
-  * @li 1 - Enable HEC ExOR with value 0x55
-  * @li 0 - Use generated HEC value.
-  */
-
-    unsigned int reserved_2:1;    /**< [23] These bits are always 0
-    */
-    unsigned int txCellSize:7;    /**< [22:16] Transmit expected cell size. Configures the cell size
-    * for the transmit module: Values between 52-64 are valid.
-    */
-    unsigned int reserved_3:3;  /**< [15:13] These bits are always 0 */
-    unsigned int txAddrRange:5;       /**< [12:8] When configured as an ATM master in MPHY mode this
-    * register specifies the upper limit of the PHY polling logical
-    * range. The number of active PHYs are TxAddrRange + 1.
-    */
-    unsigned int reserved_4:3;      /**< [7:5] These bits are always 0 */
-    unsigned int txPHYAddr:5;     /**< [4:0] When configured as a slave in an MPHY system this register
-    * specifies the physical address of the PHY.
-    */
-    }
-
-    utTxConfig;       /**< Tx config Utopia register */
-
-   /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-   * @struct UtTxStatsConfig_
-   * @brief Utopia Tx stats Register
-    */
-    struct UtTxStatsConfig_
-    {
-
-    unsigned int vpi:12;  /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0]
-    @li Note: if VCStatsTxGFC is set to 0 the GFC field is ignored in test. */
-
-    unsigned int vci:16;  /**< [19:4] ATM VCI [15:0] or PHY Address[4] */
-
-    unsigned int pti:3;  /**< [3:1] ATM PTI [2:0] or PHY Address[3:1]
-  @li Note: if VCStatsTxPTI is set to 0 the PTI field is ignored in test.
-  @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port
-  address as defined by this register is used for ATM statistics [4:0]. */
-
-    unsigned int clp:1;  /**< [0] ATM CLP or PHY Address [0]
-  @li Note: if VCStatsTxCLP is set to 0 the CLP field is ignored in test.
-  @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port
-  address as defined by this register is used for ATM statistics [4:0]. */
-    }
-
-    utTxStatsConfig;       /**< Tx stats config Utopia register */
-
-       /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-       * @struct UtTxDefineIdle_
-       * @brief Utopia Tx idle cells Register
-    */
-    struct UtTxDefineIdle_
-    {
-
-    unsigned int vpi:12;  /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0]
-    @li Note: if VCIdleTxGFC is set to 0 the GFC field is ignored in test. */
-
-    unsigned int vci:16;  /**< [19:4] ATM VCI [15:0] */
-
-    unsigned int pti:3;  /**< [3:1] ATM PTI PTI [2:0]
-  @li Note: if VCIdleTxPTI is set to 0 the PTI field is ignored in test.*/
-
-    unsigned int clp:1;  /**< [0] ATM CLP [0]
-  @li Note: if VCIdleTxCLP is set to 0 the CLP field is ignored in test.*/
-    }
-
-    utTxDefineIdle;      /**< Tx idle cell config Utopia register */
-
-      /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-      * @struct UtTxEnableFields_
-      * @brief Utopia Tx ienable fields Register
-    */
-    struct UtTxEnableFields_
-    {
-
-    unsigned int defineTxIdleGFC:1;    /**< [31] This register is used to include or exclude the GFC
-    field of the ATM header when testing for Idle cells.
-    @li 1 - GFC field is valid.
-    @li 0 - GFC field ignored.*/
-
-    unsigned int defineTxIdlePTI:1;    /**< [30] This register is used to include or exclude the PTI
-    field of the ATM header when testing for Idle cells.
-    @li 1 - PTI field is valid
-    @li    0 - PTI field ignored.*/
-
-    unsigned int defineTxIdleCLP:1;    /**< [29] This register is used to include or
-    exclude the CLP field of the ATM header when testing for Idle cells.
-    @li 1 - CLP field is valid.
-    @li 0 - CLP field ignored. */
-
-    unsigned int phyStatsTxEnb:1;    /**< [28] This register is used to enable or disable ATM
-  statistics gathering based on the specified PHY address as defined
-  in TxStatsConfig register.
-  @li 1 - Enable statistics for specified transmit PHY address.
-    @li 0 - Disable statistics for specified transmit PHY address. */
-
-    unsigned int vcStatsTxEnb:1;  /**< [27] This register is used to change the ATM
-      statistics-gathering mode from the specified logical PHY address
-      to a specific VPI/VCI address.
-      @li 1 - Enable statistics for specified VPI/VCI address.
-      @li 0 - Disable statistics for specified VPI/VCI address */
-
-    unsigned int vcStatsTxGFC:1;  /**< [26] This register is used to include or exclude the GFC
-      field of the ATM header when ATM VPI/VCI statistics are enabled.
-      GFC is only available at the UNI and uses the first 4-bits of
-      the VPI field.
-      @li 1 - GFC field is valid
-      @li 0 - GFC field ignored.*/
-
-    unsigned int vcStatsTxPTI:1;  /**< [25] This register is used to include or exclude the PTI
-      field of the ATM header when ATM VPI/VCI statistics are enabled.
-      @li 1 - PTI field is valid
-      @li 0 - PTI field ignored.*/
-
-    unsigned int vcStatsTxCLP:1;  /**< [24] This register is used to include or exclude the CLP
-      field of the ATM header when ATM VPI/VCI statistics are enabled.
-      @li 1 - CLP field is valid
-      @li 0 - CLP field ignored. */
-
-    unsigned int reserved_1:3;  /**< [23-21] These bits are always 0 */
-
-    unsigned int txPollStsInt:1;    /**< [20] Enable the assertion of the ucp_tx_poll_sts condition
-  where there is a change in polling status.
-  @li 1 - ucp_tx_poll_sts asserted whenever there is a change in status
-  @li    0 - ucp_tx_poll_sts asserted if ANY transmit PHY is available
-  */
-    unsigned int txCellOvrInt:1;    /**< [19] Enable TxCellCount overflow CBI Transmit Status condition
-      assertion.
-      @li 1 - If TxCellCountOvr is set assert the Transmit Status Condition.
-      @li 0 - No CBI Transmit Status condition assertion */
-
-    unsigned int txIdleCellOvrInt:1;  /**< [18] Enable TxIdleCellCount overflow Transmit Status Condition
-    @li 1 - If TxIdleCellCountOvr is set assert the Transmit Status Condition
-      @li 0 - No CBI Transmit Status condition assertion..*/
-
-    unsigned int enbIdleCellCnt:1;    /**< [17] Enable Transmit Idle Cell Count.
-    @li 1 - Enable count of Idle cells transmitted.
-      @li 0 - No count is maintained. */
-
-    unsigned int enbTxCellCnt:1;    /**< [16] Enable Transmit Valid Cell Count of non-idle/non-error cells
-      @li 1 - Enable count of valid cells transmitted- non-idle/non-error
-      @li 0 - No count is maintained.*/
-
-    unsigned int reserved_2:16;   /**< [15:0] These bits are always 0 */
-    } utTxEnableFields;  /**< Tx enable Utopia register */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtTxTransTable0_
-    * @brief Utopia Tx translation table Register
-    */
-    struct UtTxTransTable0_
-    {
-
-    unsigned int phy0:5;  /**< [31-27] Tx Mapping value of logical phy 0 */
-
-    unsigned int phy1:5;  /**< [26-22] Tx Mapping value of logical phy 1 */
-
-    unsigned int phy2:5;  /**< [21-17] Tx Mapping value of logical phy 2 */
-
-    unsigned int reserved_1:1;  /**< [16] These bits are always 0.*/
-
-    unsigned int phy3:5;  /**< [15-11] Tx Mapping value of logical phy 3 */
-
-    unsigned int phy4:5;  /**< [10-6] Tx Mapping value of logical phy 4 */
-
-    unsigned int phy5:5;  /**< [5-1] Tx Mapping value of logical phy 5 */
-
-    unsigned int reserved_2:1;  /**< [0] These bits are always 0 */
-    } utTxTransTable0;  /**< Tx translation table */
-
-  /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-  * @struct UtTxTransTable1_
-  * @brief Utopia Tx translation table Register
-    */
-    struct UtTxTransTable1_
-    {
-
-    unsigned int phy6:5;  /**< [31-27] Tx Mapping value of logical phy 6 */
-
-    unsigned int phy7:5;  /**< [26-22] Tx Mapping value of logical phy 7 */
-
-    unsigned int phy8:5;  /**< [21-17] Tx Mapping value of logical phy 8 */
-
-    unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
-
-    unsigned int phy9:5;  /**< [15-11] Tx Mapping value of logical phy 3 */
-
-    unsigned int phy10:5;   /**< [10-6] Tx Mapping value of logical phy 4 */
-
-    unsigned int phy11:5;   /**< [5-1] Tx Mapping value of logical phy 5 */
-
-    unsigned int reserved_2:1;  /**< [0] These bits are always 0 */
-    } utTxTransTable1;  /**< Tx translation table */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtTxTransTable2_
-    * @brief Utopia Tx translation table Register
-    */
-    struct UtTxTransTable2_
-    {
-
-    unsigned int phy12:5;   /**< [31-27] Tx Mapping value of logical phy 6 */
-
-    unsigned int phy13:5;   /**< [26-22] Tx Mapping value of logical phy 7 */
-
-    unsigned int phy14:5;   /**< [21-17] Tx Mapping value of logical phy 8 */
-
-    unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
-
-    unsigned int phy15:5;   /**< [15-11] Tx Mapping value of logical phy 3 */
-
-    unsigned int phy16:5;   /**< [10-6] Tx Mapping value of logical phy 4 */
-
-    unsigned int phy17:5;   /**< [5-1] Tx Mapping value of logical phy 5 */
-
-    unsigned int reserved_2:1;  /**< [0] These bits are always 0 */
-    } utTxTransTable2;    /**< Tx translation table */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtTxTransTable3_
-    * @brief Utopia Tx translation table Register
-    */
-    struct UtTxTransTable3_
-    {
-
-    unsigned int phy18:5;   /**< [31-27] Tx Mapping value of logical phy 6 */
-
-    unsigned int phy19:5;   /**< [26-22] Tx Mapping value of logical phy 7 */
-
-    unsigned int phy20:5;   /**< [21-17] Tx Mapping value of logical phy 8 */
-
-    unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
-
-    unsigned int phy21:5;   /**< [15-11] Tx Mapping value of logical phy 3 */
-
-    unsigned int phy22:5;   /**< [10-6] Tx Mapping value of logical phy 4 */
-
-    unsigned int phy23:5;   /**< [5-1] Tx Mapping value of logical phy 5 */
-
-    unsigned int reserved_2:1;  /**< [0] These bits are always 0 */
-    } utTxTransTable3;  /**< Tx translation table */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtTxTransTable4_
-    * @brief Utopia Tx translation table Register
-    */
-    struct UtTxTransTable4_
-    {
-
-    unsigned int phy24:5;   /**< [31-27] Tx Mapping value of logical phy 6 */
-
-    unsigned int phy25:5;   /**< [26-22] Tx Mapping value of logical phy 7 */
-
-    unsigned int phy26:5;   /**< [21-17] Tx Mapping value of logical phy 8 */
-
-    unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
-
-    unsigned int phy27:5;   /**< [15-11] Tx Mapping value of logical phy 3 */
-
-    unsigned int phy28:5;   /**< [10-6] Tx Mapping value of logical phy 4 */
-
-    unsigned int phy29:5;   /**< [5-1] Tx Mapping value of logical phy 5 */
-
-    unsigned int reserved_2:1;  /**< [0] These bits are always 0 */
-    } utTxTransTable4;  /**< Tx translation table */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtTxTransTable5_
-    * @brief Utopia Tx translation table Register
-    */
-    struct UtTxTransTable5_
-    {
-
-    unsigned int phy30:5;   /**< [31-27] Tx Mapping value of logical phy 6 */
-
-    unsigned int reserved_1:27;     /**< [26-0] These bits are always 0 */
-
-    } utTxTransTable5;  /**< Tx translation table */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtRxConfig_
-    * @brief Utopia Rx config Register
-    */
-    struct UtRxConfig_
-    {
-
-    unsigned int rxInterface:1;    /**< [31] Utopia Receive Interface. The following encoding is used
- to set the Utopia Receive interface as ATM master or PHY slave:
- @li 1 - PHY
-    @li 0 - ATM */
-
-    unsigned int rxMode:1;      /**< [30] Utopia Receive Mode. The following encoding is used to set
-      the Utopia Receive mode to SPHY or MPHY:
-      @li 1 - SPHY
-    @li 0 - MPHY */
-
-    unsigned int rxOctet:1;  /**< [29] Utopia Receive cell transfer protocol. Used to set the Utopia
-  cell transfer protocol to Octet-level handshaking. Note this is only
-  applicable in SPHY mode.
-  @li 1 - Octet-handshaking enabled
-    @li 0 - Cell-handshaking enabled */
-
-    unsigned int rxParity:1;    /**< [28] Utopia Receive Parity Checking enable.
-    @li 1 - Parity checking enabled
-    @li 0 - Parity checking disabled */
-
-    unsigned int rxEvenParity:1;/**< [27] Utopia Receive Parity Mode
-    @li 1 - Check for Even Parity
-    @li 0 - Check for Odd Parity.*/
-
-    unsigned int rxHEC:1;    /**< [26] RxHEC    Header Error Check Mode. Enables/disables cell header
-    error checking on the received cell header.
-    @li 1 - HEC checking enabled
-    @li 0 - HEC checking disabled */
-
-    unsigned int rxCOSET:1;  /**< [25] If enabled the HEC is Exclusive-OR'ed with the value 0x55
-  before being tested with the received HEC.
-  @li 1 - Enable HEC ExOR with value 0x55.
-    @li 0 - Use generated HEC value.*/
-
-    unsigned int rxHECpass:1;    /**< [24] Specifies if the incoming cell HEC byte should be transferred
-     after optional processing to the NPE2 Coprocessor Bus Interface or
-     if it should be discarded.
-     @li 1 - HEC maintained 53-byte/UDC cell sent to NPE2.
-    @li 0 - HEC discarded 52-byte/UDC cell sent to NPE2 coprocessor.*/
-
-    unsigned int reserved_1:1;    /**< [23] These bits are always 0 */
-
-    unsigned int rxCellSize:7;    /**< [22:16] Receive cell size. Configures the receive cell size.
-      Values between 52-64 are valid */
-
-    unsigned int rxHashEnbGFC:1;      /**< [15] Specifies if the VPI field [11:8]/GFC field should be
-      included in the Hash data input or if the bits should be padded
-      with 1'b0.
-      @li 1 - VPI [11:8]/GFC field valid and used in Hash residue calculation.
-      @li 0 - VPI [11:8]/GFC field padded with 1'b0 */
-
-    unsigned int rxPreHash:1; /**< [14] Enable Pre-hash value generation. Specifies if the
- incoming cell data should be pre-hashed to allow VPI/VCI header look-up
- in a hash table.
- @li 1 - Pre-hashing enabled
-      @li 0 - Pre-hashing disabled */
-
-    unsigned int reserved_2:1;    /**< [13] These bits are always 0 */
-
-    unsigned int rxAddrRange:5;     /**< [12:8] In ATM master, MPHY mode,
-     * this register specifies the upper
-     * limit of the PHY polling logical range. The number of active PHYs are
-     * RxAddrRange + 1.
-     */
-    unsigned int reserved_3:3;    /**< [7-5] These bits are always 0 .*/
-    unsigned int rxPHYAddr:5;     /**< [4:0] When configured as a slave in an MPHY system this register
-      * specifies the physical address of the PHY.
-      */
-    } utRxConfig;  /**< Rx config Utopia register */
-
-      /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-      * @struct UtRxStatsConfig_
-      * @brief Utopia Rx stats config Register
-    */
-    struct UtRxStatsConfig_
-    {
-
-    unsigned int vpi:12;  /**< [31:20] ATM VPI    VPI [11:0] OR GFC [3:0] and VPI [7:0]
-    @li Note: if VCStatsRxGFC is set to 0 the GFC field is ignored in test. */
-
-    unsigned int vci:16;  /**< [19:4] VCI [15:0] or PHY Address [4] */
-
-    unsigned int pti:3;  /**< [3:1] PTI [2:0] or or PHY Address [3:1]
-  @li Note: if VCStatsRxPTI is set to 0 the PTI field is ignored in test.
-  @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used
-  for statistics gathering.. */
-
-    unsigned int clp:1;  /**< [0] CLP [0] or PHY Address [0]
-  @li Note: if VCStatsRxCLP is set to 0 the CLP field is ignored in test.
-  @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used
-  for statistics gathering.. */
-    } utRxStatsConfig;  /**< Rx stats config Utopia register */
-
-  /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-  * @struct UtRxDefineIdle_
-  * @brief Utopia Rx idle cells config Register
-    */
-    struct UtRxDefineIdle_
-    {
-
-    unsigned int vpi:12;  /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0]
-    @li Note: if VCIdleRxGFC is set to 0 the GFC field is ignored in test. */
-
-    unsigned int vci:16;  /**< [19:4] ATM VCI [15:0] */
-
-    unsigned int pti:3;  /**< [3:1] ATM PTI PTI [2:0]
-  @li Note: if VCIdleRxPTI is set to 0 the PTI field is ignored in test.*/
-
-    unsigned int clp:1;  /**< [0] ATM CLP [0]
-  @li Note: if VCIdleRxCLP is set to 0 the CLP field is ignored in test.*/
-    } utRxDefineIdle;      /**< Rx idle cell config Utopia register */
-
-      /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-      * @struct UtRxEnableFields_
-      * @brief Utopia Rx enable Register
-    */
-    struct UtRxEnableFields_
-    {
-
-    unsigned int defineRxIdleGFC:1;/**< [31] This register is used to include or exclude the GFC
- field of the ATM header when testing for Idle cells.
- @li 1 - GFC field is valid.
-    @li 0 - GFC field ignored.*/
-
-    unsigned int defineRxIdlePTI:1;/**< [30] This register is used to include or exclude the PTI
- field of the ATM header when testing for Idle cells.
- @li 1 - PTI field is valid.
-    @li 0 - PTI field ignored.*/
-
-    unsigned int defineRxIdleCLP:1;/**< [29] This register is used to include or exclude the CLP
- field of the ATM header when testing for Idle cells.
- @li 1 - CLP field is valid.
-    @li    0 - CLP field ignored.*/
-
-    unsigned int phyStatsRxEnb:1;/**< [28] This register is used to enable or disable ATM statistics
-     gathering based on the specified PHY address as defined in RxStatsConfig
-     register.
-     @li 1 - Enable statistics for specified receive PHY address.
-    @li 0 - Disable statistics for specified receive PHY address.*/
-
-    unsigned int vcStatsRxEnb:1;/**< [27] This register is used to enable or disable ATM statistics
-    gathering based on a specific VPI/VCI address.
-    @li 1 - Enable statistics for specified VPI/VCI address.
-    @li 0 - Disable statistics for specified VPI/VCI address.*/
-
-    unsigned int vcStatsRxGFC:1;/**< [26] This register is used to include or exclude the GFC field
-    of the ATM header when ATM VPI/VCI statistics are enabled. GFC is only
-    available at the UNI and uses the first 4-bits of the VPI field.
-    @li 1 - GFC field is valid.
-    @li 0 - GFC field ignored. */
-
-    unsigned int vcStatsRxPTI:1;/**< [25] This register is used to include or exclude the PTI field
-    of the ATM header when ATM VPI/VCI statistics are enabled.
-    @li 1 - PTI field is valid.
-    @li 0 - PTI field ignored.*/
-
-    unsigned int vcStatsRxCLP:1;/**< [24] This register is used to include or exclude the CLP field
-    of the ATM header when ATM VPI/VCI statistics are enabled.
-    @li 1 - CLP field is valid.
-    @li 0 - CLP field ignored. */
-
-    unsigned int discardHecErr:1;/**< [23] Discard cells with an invalid HEC.
-     @li 1 - Discard cells with HEC errors
-    @li 0 - Cells with HEC errors are passed */
-
-    unsigned int discardParErr:1;/**< [22] Discard cells containing parity errors.
-     @li 1 - Discard cells with parity errors
-    @li 0 - Cells with parity errors are passed */
-
-    unsigned int discardIdle:1;    /**< [21] Discard Idle Cells based on DefineIdle register values
- @li    1 - Discard IDLE cells
-    @li 0 - IDLE cells passed */
-
-    unsigned int enbHecErrCnt:1;/**< [20] Enable Receive HEC Error Count.
-    @li 1 - Enable count of received cells containing HEC errors
-    @li 0 - No count is maintained. */
-
-    unsigned int enbParErrCnt:1;/**< [19] Enable Parity Error Count
-    @li    1 - Enable count of received cells containing Parity errors
-    @li 0 - No count is maintained. */
-
-    unsigned int enbIdleCellCnt:1;/**< [18] Enable Receive Idle Cell Count.
-      @li 1 - Enable count of Idle cells received.
-    @li 0 - No count is maintained.*/
-
-    unsigned int enbSizeErrCnt:1;/**< [17] Enable Receive Size Error Count.
-     @li 1 - Enable count of received cells of incorrect size
-    @li    0 - No count is maintained. */
-
-    unsigned int enbRxCellCnt:1;/**< [16] Enable Receive Valid Cell Count of non-idle/non-error cells.
-    @li    1 - Enable count of valid cells received - non-idle/non-error
-    @li 0 - No count is maintained. */
-
-    unsigned int reserved_1:3;    /**< [15:13] These bits are always 0 */
-
-    unsigned int rxCellOvrInt:1;      /**< [12] Enable CBI Utopia Receive Status Condition if the RxCellCount
-      register overflows.
-      @li 1 - CBI Receive Status asserted.
-      @li    0 - No CBI Receive Status asserted.*/
-
-    unsigned int invalidHecOvrInt:1;  /**< [11] Enable CBI Receive Status Condition if the InvalidHecCount
-    register overflows.
-    @li    1 - CBI Receive Condition asserted.
-      @li 0 - No CBI Receive Condition asserted */
-
-    unsigned int invalidParOvrInt:1;  /**< [10] Enable CBI Receive Status Condition if the InvalidParCount
-    register overflows
-    @li    1 - CBI Receive Condition asserted.
-      @li 0 - No CBI Receive Condition asserted */
-
-    unsigned int invalidSizeOvrInt:1;   /**< [9] Enable CBI Receive Status Condition if the InvalidSizeCount
-     register overflows.
-     @li 1 - CBI Receive Status Condition asserted.
-     @li 0 - No CBI Receive Status asserted */
-
-    unsigned int rxIdleOvrInt:1;      /**< [8] Enable CBI Receive Status Condition if the RxIdleCount overflows.
-      @li 1 - CBI Receive Condition asserted.
-      @li 0 - No CBI Receive Condition asserted */
-
-    unsigned int reserved_2:3;    /**< [7:5] These bits are always 0 */
-
-    unsigned int rxAddrMask:5;    /**< [4:0] This register is used as a mask to allow the user to increase
-    the PHY receive address range. The register should be programmed with
-    the address-range limit, i.e. if set to 0x3 the address range increases
-  to a maximum of 4 addresses. */
-    } utRxEnableFields;      /**< Rx enable Utopia register */
-
-      /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-      * @struct UtRxTransTable0_
-      * @brief Utopia Rx translation table Register
-    */
-    struct UtRxTransTable0_
-    {
-
-    unsigned int phy0:5;  /**< [31-27] Rx Mapping value of logical phy 0 */
-
-    unsigned int phy1:5;  /**< [26-22] Rx Mapping value of logical phy 1 */
-
-    unsigned int phy2:5;  /**< [21-17] Rx Mapping value of logical phy 2 */
-
-    unsigned int reserved_1:1;  /**< [16] These bits are always 0 */
-
-    unsigned int phy3:5;  /**< [15-11] Rx Mapping value of logical phy 3 */
-
-    unsigned int phy4:5;  /**< [10-6] Rx Mapping value of logical phy 4 */
-
-    unsigned int phy5:5;  /**< [5-1] Rx Mapping value of logical phy 5 */
-
-    unsigned int reserved_2:1;  /**< [0] These bits are always 0 */
-    }
-
-    utRxTransTable0;  /**< Rx translation table */
-
-  /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-  * @struct UtRxTransTable1_
-  * @brief Utopia Rx translation table Register
-    */
-    struct UtRxTransTable1_
-    {
-
-    unsigned int phy6:5;  /**< [31-27] Rx Mapping value of logical phy 6 */
-
-    unsigned int phy7:5;  /**< [26-22] Rx Mapping value of logical phy 7 */
-
-    unsigned int phy8:5;  /**< [21-17] Rx Mapping value of logical phy 8 */
-
-    unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
-
-    unsigned int phy9:5;  /**< [15-11] Rx Mapping value of logical phy 3 */
-
-    unsigned int phy10:5;   /**< [10-6] Rx Mapping value of logical phy 4 */
-
-    unsigned int phy11:5;   /**< [5-1] Rx Mapping value of logical phy 5 */
-
-    unsigned int reserved_2:1;  /**< [0] These bits are always 0 */
-    }
-
-    utRxTransTable1;  /**< Rx translation table */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtRxTransTable2_
-    * @brief Utopia Rx translation table Register
-    */
-    struct UtRxTransTable2_
-    {
-
-    unsigned int phy12:5;   /**< [31-27] Rx Mapping value of logical phy 6 */
-
-    unsigned int phy13:5;   /**< [26-22] Rx Mapping value of logical phy 7 */
-
-    unsigned int phy14:5;   /**< [21-17] Rx Mapping value of logical phy 8 */
-
-    unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
-
-    unsigned int phy15:5;   /**< [15-11] Rx Mapping value of logical phy 3 */
-
-    unsigned int phy16:5;   /**< [10-6] Rx Mapping value of logical phy 4 */
-
-    unsigned int phy17:5;   /**< [5-1] Rx Mapping value of logical phy 5 */
-
-    unsigned int reserved_2:1;  /**< [0] These bits are always 0 */
-    } utRxTransTable2;    /**< Rx translation table */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtRxTransTable3_
-    * @brief Utopia Rx translation table Register
-    */
-    struct UtRxTransTable3_
-    {
-
-    unsigned int phy18:5;   /**< [31-27] Rx Mapping value of logical phy 6 */
-
-    unsigned int phy19:5;   /**< [26-22] Rx Mapping value of logical phy 7 */
-
-    unsigned int phy20:5;   /**< [21-17] Rx Mapping value of logical phy 8 */
-
-    unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
-
-    unsigned int phy21:5;   /**< [15-11] Rx Mapping value of logical phy 3 */
-
-    unsigned int phy22:5;   /**< [10-6] Rx Mapping value of logical phy 4 */
-
-    unsigned int phy23:5;   /**< [5-1] Rx Mapping value of logical phy 5 */
-
-    unsigned int reserved_2:1;  /**< [0] These bits are always 0 */
-    } utRxTransTable3;  /**< Rx translation table */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtRxTransTable4_
-    * @brief Utopia Rx translation table Register
-    */
-    struct UtRxTransTable4_
-    {
-
-    unsigned int phy24:5;   /**< [31-27] Rx Mapping value of logical phy 6 */
-
-    unsigned int phy25:5;   /**< [26-22] Rx Mapping value of logical phy 7 */
-
-    unsigned int phy26:5;   /**< [21-17] Rx Mapping value of logical phy 8 */
-
-    unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
-
-    unsigned int phy27:5;   /**< [15-11] Rx Mapping value of logical phy 3 */
-
-    unsigned int phy28:5;   /**< [10-6] Rx Mapping value of logical phy 4 */
-
-    unsigned int phy29:5;   /**< [5-1] Rx Mapping value of logical phy 5 */
-
-    unsigned int reserved_2:1;  /**< [0] These bits are always 0 */
-    } utRxTransTable4;  /**< Rx translation table */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtRxTransTable5_
-    * @brief Utopia Rx translation table Register
-    */
-    struct UtRxTransTable5_
-    {
-
-    unsigned int phy30:5;   /**< [31-27] Rx Mapping value of logical phy 6 */
-
-    unsigned int reserved_1:27;     /**< [26-0] These bits are always 0 */
-
-    } utRxTransTable5;  /**< Rx translation table */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtSysConfig_
-    * @brief NPE setup Register
-    */
-    struct UtSysConfig_
-    {
-
-    unsigned int reserved_1:2;     /**< [31-30] These bits are always 0 */
-    unsigned int txEnbFSM:1;    /**< [29] Enables the operation ofthe Utopia Transmit FSM
-   * @li 1 - FSM enabled
-   * @li 0 - FSM inactive
-   */
-    unsigned int rxEnbFSM:1;    /**< [28] Enables the operation ofthe Utopia Revieve FSM
-   * @li 1 - FSM enabled
-   * @li 0 - FSM inactive
-   */
-    unsigned int disablePins:1;    /**< [27] Disable Utopia interface I/O pins forcing the signals to an
-   * inactive state.  Note that this bit is set on reset and must be
-   * de-asserted
-   * @li 0 - Normal data transfer
-   * @li    1 - Utopia interface pins are forced inactive
-    */
-    unsigned int tstLoop:1;    /**< [26] Test Loop Back Enable.
-    * @li Note: For loop back to function RxMode and Tx Mode must both be set
-    * to single PHY mode.
-    * @li 0 - Loop back
-    * @li 1 - Normal operating mode
-    */
-
-    unsigned int txReset:1;   /**< [25] Resets the Utopia Coprocessor transmit module to a known state.
-    * @li Note: All transmit configuration and status registers will be reset
-    * to their reset values.
-    * @li 0 - Normal operating mode
-    * @li 1 - Reset transmit modules
-    */
-
-    unsigned int rxReset:1;   /**< [24] Resets the Utopia Coprocessor receive module to a known state.
-    * @li Note: All receive configuration and status registers will be reset
-    * to their reset values.
-    * @li    0 - Normal operating mode
-    * @li 1 - Reset receive modules
-    */
-
-    unsigned int reserved_2:24;     /**< [23-0] These bits are always 0 */
-    } utSysConfig;  /**< NPE debug config */
-
-}
-IxAtmdAccUtopiaConfig;
-
-/**
-*
-* @brief Utopia status
-*
-* This structure is used to set/get the Utopia status parameters
-* @li contains debug cell counters, to be accessed during a read operation
-*
-* @note - the exact description of all parameters is done in the Utopia reference
-*   documents.
-*
-*/
-typedef struct
-{
-
-    unsigned int utTxCellCount;  /**< count of cells transmitted */
-
-    unsigned int utTxIdleCellCount;    /**< count of idle cells transmitted */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtTxCellConditionStatus_
-    * @brief Utopia Tx Status Register
-    */
-    struct UtTxCellConditionStatus_
-    {
-
-    unsigned int reserved_1:2;   /**< [31:30] These bits are always 0 */
-    unsigned int txFIFO2Underflow:1; /**< [29] This bit is set if 64-byte
-                                     * Transmit FIFO2 indicates a FIFO underflow
-                                     * error condition.
-                                     */
-    unsigned int txFIFO1Underflow:1; /**< [28] This bit is set if
-                                     * 64-byte Transmit FIFO1 indicates a FIFO
-                                     * underflow error condition.
-                                     */
-    unsigned int txFIFO2Overflow:1;  /**< [27] This bit is set if 64-byte
-                                     * Transmit FIFO2 indicates a FIFO overflow
-                                     * error condition.
-                                     */
-    unsigned int txFIFO1Overflow:1; /**< [26] This bit is set if 64-byte
-                                    * Transmit FIFO1 indicates a FIFO overflow
-                                    * error condition.
-                                    */
-    unsigned int txIdleCellCountOvr:1; /**< [25] This bit is set if the
-                                       * TxIdleCellCount register overflows.
-                                       */
-    unsigned int txCellCountOvr:1; /**< [24] This bit is set if the
-                                   * TxCellCount register overflows
-                                   */
-    unsigned int reserved_2:24;    /**< [23:0] These bits are always 0 */
-    } utTxCellConditionStatus;    /**< Tx cells condition status */
-
-    unsigned int utRxCellCount; /**< count of cell received */
-    unsigned int utRxIdleCellCount;    /**< count of idle cell received */
-    unsigned int utRxInvalidHECount;     /**< count of invalid cell
-                                        * received because of HEC errors
-                                        */
-    unsigned int utRxInvalidParCount;  /**< count of invalid cell received
-                                        * because of parity errors
-                                        */
-    unsigned int utRxInvalidSizeCount;  /**< count of invalid cell
-                                        * received because of cell
-                                        * size errors
-                                        */
-
-    /**
-    * @ingroup IxAtmdAccUtopiaCtrlAPI
-    * @struct UtRxCellConditionStatus_
-    * @brief Utopia Rx Status Register
-    */
-    struct UtRxCellConditionStatus_
-    {
-
-    unsigned int reserved_1:3;  /**< [31:29] These bits are always 0.*/
-    unsigned int rxCellCountOvr:1;      /**< [28] This bit is set if the RxCellCount register overflows. */
-    unsigned int invalidHecCountOvr:1;    /**< [27] This bit is set if the InvalidHecCount register overflows.*/
-    unsigned int invalidParCountOvr:1;    /**< [26] This bit is set if the InvalidParCount register overflows.*/
-    unsigned int invalidSizeCountOvr:1;    /**< [25] This bit is set if the InvalidSizeCount register overflows.*/
-    unsigned int rxIdleCountOvr:1;      /**< [24] This bit is set if the RxIdleCount register overflows.*/
-    unsigned int reserved_2:4;  /**< [23:20] These bits are always 0 */
-    unsigned int rxFIFO2Underflow:1;  /**< [19] This bit is set if 64-byte Receive FIFO2
-                                      * indicates a FIFO underflow error condition.
-                                      */
-    unsigned int rxFIFO1Underflow:1;  /**< [18] This bit is set if 64-byte Receive
-                                      * FIFO1 indicates a FIFO underflow error condition
-                                    . */
-    unsigned int rxFIFO2Overflow:1;    /**< [17] This bit is set if 64-byte Receive FIFO2
-                                       * indicates a FIFO overflow error condition.
-                                        */
-    unsigned int rxFIFO1Overflow:1;    /**< [16] This bit is set if 64-byte Receive FIFO1
-                                    * indicates a FIFO overflow error condition.
-                                    */
-    unsigned int reserved_3:16;      /**< [15:0] These bits are always 0. */
-    } utRxCellConditionStatus;    /**< Rx cells condition status */
-
-} IxAtmdAccUtopiaStatus;
-
-/**
- * @} defgroup IxAtmdAccUtopiaCtrlAPI
- */
-
- /**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig *
-                        ixAtmdAccUtopiaConfigPtr)
- *
- * @brief Send the configuration structure to the Utopia interface
- *
- * This function downloads the @a IxAtmdAccUtopiaConfig structure to
- * the Utopia and has the following effects
- *  @li setup the Utopia interface
- *  @li initialise the NPE
- *  @li reset the Utopia cell counters and status registers to known values
- *
- * This action has to be done once at initialisation. A lock is preventing
- * the concurrent use of @a ixAtmdAccUtopiaStatusGet() and
- * @A ixAtmdAccUtopiaConfigSet()
- *
- * @param *ixAtmdAccNPEConfigPtr @ref IxAtmdAccUtopiaConfig [in] - pointer to a structure to download to
- *  Utopia. This parameter cannot be a null pointer.
- *
- * @return @li IX_SUCCESS successful download
- * @return @li IX_FAIL error in the parameters, or configuration is not
- *         complete or failed
- *
- * @sa ixAtmdAccUtopiaStatusGet
- *
- */
-PUBLIC IX_STATUS ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig *
-                        ixAtmdAccUtopiaConfigPtr);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus *
-                        ixAtmdAccUtopiaStatus)
- *
- * @brief Get the Utopia interface configuration.
- *
- * This function reads the Utopia registers and the Cell counts
- * and fills the @a IxAtmdAccUtopiaStatus structure
- *
- * A lock is preventing the concurrent
- * use of @a ixAtmdAccUtopiaStatusGet() and @A ixAtmdAccUtopiaConfigSet()
- *
- * @param ixAtmdAccUtopiaStatus @ref IxAtmdAccUtopiaStatus [out] - pointer to structure to be updated from internal
- *        hardware counters. This parameter cannot be a NULL pointer.
- *
- * @return @li IX_SUCCESS successful read
- * @return @li IX_FAIL error in the parameters null pointer, or
- *          configuration read is not complete or failed
- *
- * @sa ixAtmdAccUtopiaConfigSet
- *
- */
-PUBLIC IX_STATUS ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus *
-                        ixAtmdAccUtopiaStatus);
-
-/**
- *
- * @ingroup IxAtmdAcc
- *
- * @fn ixAtmdAccPortEnable (IxAtmLogicalPort port)
- *
- * @brief enable a PHY logical port
- *
- * This function enables the transmission over one port. It should be
- * called before accessing any resource from this port and before the
- * establishment of a VC.
- *
- * When a port is enabled, the cell transmission to the Utopia interface
- * is started. If there is no traffic already running, idle cells are
- * sent over the interface.
- *
- * This function can be called multiple times.
- *
- * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
- *
- * @return @li IX_SUCCESS enable is complete
- * @return @li IX_ATMDACC_WARNING port already enabled
- * @return @li IX_FAIL enable failed, wrong parameter, or cannot
- *         initialise this port (the port is maybe already in use,
- *         or there is a hardware issue)
- *
- * @note - This function needs internal locks and should not be
- *         called from an interrupt context
- *
- * @sa ixAtmdAccPortDisable
- *
- */
-PUBLIC IX_STATUS ixAtmdAccPortEnable (IxAtmLogicalPort port);
-
-/**
- *
- * @ingroup IxAtmdAccCtrlAPI
- *
- * @fn ixAtmdAccPortDisable (IxAtmLogicalPort port)
- *
- * @brief disable a PHY logical port
- *
- * This function disable the transmission over one port.
- *
- * When a port is disabled, the cell transmission to the Utopia interface
- * is stopped.
- *
- * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
- *
- * @return @li IX_SUCCESS disable is complete
- * @return @li IX_ATMDACC_WARNING port already disabled
- * @return @li IX_FAIL disable failed, wrong parameter .
- *
- * @note - This function needs internal locks and should not be called
- *         from an interrupt context
- *
- * @note - The response from hardware is done through the txDone mechanism
- *         to ensure the synchrnisation with tx resources. Therefore, the
- *         txDone mechanism needs to be serviced to make a PortDisable complete.
- *
- * @sa ixAtmdAccPortEnable
- * @sa ixAtmdAccPortDisableComplete
- * @sa ixAtmdAccTxDoneDispatch
- *
- */
-PUBLIC IX_STATUS ixAtmdAccPortDisable (IxAtmLogicalPort port);
-
-/**
-*
-* @ingroup IxAtmdAccCtrlAPI
-*
-* @fn ixAtmdAccPortDisableComplete (IxAtmLogicalPort port)
-*
-* @brief disable a PHY logical port
-*
-* This function indicates if the port disable for a port has completed. This
-* function will return true if the port has never been enabled.
-*
-* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
-*
-* @return @li true disable is complete
-* @return @li false disable failed, wrong parameter .
-*
-* @note - This function needs internal locks and should not be called
-*         from an interrupt context
-*
-* @sa ixAtmdAccPortEnable
-* @sa ixAtmdAccPortDisable
-*
-*/
-PUBLIC BOOL ixAtmdAccPortDisableComplete (IxAtmLogicalPort port);
-
-#endif /* IXATMDACCCTRL_H */
-
-/**
- * @} defgroup IxAtmdAccCtrlAPI
- */
-
-
diff --git a/drivers/net/npe/include/IxAtmm.h b/drivers/net/npe/include/IxAtmm.h
deleted file mode 100644
index 805b8c9..0000000
--- a/drivers/net/npe/include/IxAtmm.h
+++ /dev/null
@@ -1,771 +0,0 @@
-/**
- * @file    IxAtmm.h
- *
- * @date    3-DEC-2001
- *
- * @brief   Header file for the IXP400 ATM Manager component (IxAtmm)
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-/**
- * @defgroup IxAtmm IXP400 ATM Manager (IxAtmm) API
- *
- * @brief IXP400 ATM Manager component Public API
- *
- * @{
- */
-
-#ifndef IXATMM_H
-#define IXATMM_H
-
-/*
- * Put the user defined include files required
- */
-#include "IxAtmSch.h"
-#include "IxOsalTypes.h"
-
-/*
- * #defines and macros used in this file.
- */
-
-/** 
- * @def IX_ATMM_RET_ALREADY_INITIALIZED
- * 
- * @brief Component has already been initialized 
- */
-#define IX_ATMM_RET_ALREADY_INITIALIZED 2
-
-/** 
- * @def IX_ATMM_RET_INVALID_PORT
- * 
- * @brief Specified port does not exist or is out of range */
-#define IX_ATMM_RET_INVALID_PORT 3
-
-/** 
- * @def IX_ATMM_RET_INVALID_VC_DESCRIPTOR
- * 
- * @brief The VC description does not adhere to ATM standards */
-#define IX_ATMM_RET_INVALID_VC_DESCRIPTOR 4
-
-/** 
- * @def IX_ATMM_RET_VC_CONFLICT
- * 
- * @brief The VPI/VCI values supplied are either reserved, or they
- *         conflict with a previously registered VC on this port */
-#define IX_ATMM_RET_VC_CONFLICT 5
-
-/** 
- * @def IX_ATMM_RET_PORT_CAPACITY_IS_FULL
- * 
- * @brief The virtual connection cannot be established on the port
- *         because the remaining port capacity is not sufficient to
- *         support it */
-#define IX_ATMM_RET_PORT_CAPACITY_IS_FULL 6
-
-/** 
- * @def IX_ATMM_RET_NO_SUCH_VC
- * 
- * @brief No registered VC, as described by the supplied VCI/VPI or
- *         VC identifier values, exists on this port */
-#define IX_ATMM_RET_NO_SUCH_VC 7
-
-/** 
- * @def IX_ATMM_RET_INVALID_VC_ID
- * 
- * @brief The specified VC identifier is out of range. */
-#define IX_ATMM_RET_INVALID_VC_ID 8
-
-/** 
- * @def IX_ATMM_RET_INVALID_PARAM_PTR
- * 
- * @brief A pointer parameter was NULL. */
-#define IX_ATMM_RET_INVALID_PARAM_PTR 9
-
-/** 
- * @def IX_ATMM_UTOPIA_SPHY_ADDR  
- * 
- * @brief The phy address when in SPHY mode */
-#define IX_ATMM_UTOPIA_SPHY_ADDR 31
-
-/**
- * @def IX_ATMM_THREAD_PRI_HIGH
- *
- * @brief The value of high priority thread */
-#define IX_ATMM_THREAD_PRI_HIGH 90
-
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/** @brief Definition for use in the @ref IxAtmmVc structure.
- *         Indicates the direction of a VC */
-typedef enum
-{
-    IX_ATMM_VC_DIRECTION_TX=0, /**< Atmm Vc direction transmit*/
-    IX_ATMM_VC_DIRECTION_RX, /**< Atmm Vc direction receive*/
-    IX_ATMM_VC_DIRECTION_INVALID /**< Atmm Vc direction invalid*/
-} IxAtmmVcDirection;
-
-/** @brief Definition for use with @ref IxAtmmVcChangeCallback
- *         callback.  Indicates that the event type represented by the
- *         callback for this VC. */
-typedef enum
-{
-    IX_ATMM_VC_CHANGE_EVENT_REGISTER=0, /**< Atmm Vc event register*/
-    IX_ATMM_VC_CHANGE_EVENT_DEREGISTER, /**< Atmm Vc event de-register*/
-    IX_ATMM_VC_CHANGE_EVENT_INVALID /**< Atmm Vc event invalid*/
-} IxAtmmVcChangeEvent;
-
-/** @brief Definitions for use with @ref ixAtmmUTOPIAInit interface to
- *         indicate that UTOPIA loopback should be enabled or disabled
- *         on initialisation. */
-typedef enum
-{
-    IX_ATMM_UTOPIA_LOOPBACK_DISABLED=0, /**< Atmm Utopia loopback mode disabled*/
-    IX_ATMM_UTOPIA_LOOPBACK_ENABLED, /**< Atmm Utopia loopback mode enabled*/
-    IX_ATMM_UTOPIA_LOOPBACK_INVALID /**< Atmm Utopia loopback mode invalid*/
-} IxAtmmUtopiaLoopbackMode;
-
-/** @brief This structure describes the required attributes of a
- *         virtual connection.
-*/
-typedef struct {
-    unsigned vpi;  /**< VPI value of this virtual connection */
-    unsigned vci;  /**< VCI value of this virtual connection. */
-    IxAtmmVcDirection direction; /**< VC direction */
-
-    /** Traffic descriptor of this virtual connection.  This structure
-     *  is defined by the @ref IxAtmSch component.  */
-    IxAtmTrafficDescriptor trafficDesc;
-} IxAtmmVc;
-
-
-/** @brief Definitions for use with @ref ixAtmmUtopiaInit interface to
- *         indicate that UTOPIA multi-phy/single-phy mode is used.
- */
-typedef enum
-{
-    IX_ATMM_MPHY_MODE = 0, /**< Atmm phy mode mphy*/
-    IX_ATMM_SPHY_MODE, /**< Atmm phy mode sphy*/
-    IX_ATMM_PHY_MODE_INVALID /**< Atmm phy mode invalid*/
-} IxAtmmPhyMode;
-
-
-/** @brief Structure contains port-specific information required to
- *         initialize IxAtmm, and specifically, the IXP400 UTOPIA
- *         Level-2 device. */
-typedef struct {
-    unsigned reserved_1:11;     /**< [31:21] Should be zero */
-    unsigned UtopiaTxPhyAddr:5; /**< [20:16] Address of the
-     *   transmit (Tx) PHY for this
-     *   port on the 5-bit UTOPIA
-     *   Level-2 address bus */
-    unsigned reserved_2:11;     /**< [15:5] Should be zero */
-    unsigned UtopiaRxPhyAddr:5; /**< [4:0] Address of the receive
-     *   (Rx) PHY for this port on the
-     *   5-bit UTOPIA  Level-2
-     *   address bus */
-} IxAtmmPortCfg;
-
-/** @brief Callback type used with @ref ixAtmmVcChangeCallbackRegister interface
- *         Defines a callback type  which will be used to notify registered
- *         users of registration/deregistration events on a particular port
- *
- * @param eventType @ref IxAtmmVcChangeEvent [in] - Event indicating
- *                        whether the VC supplied has been added or
- *                        removed
- *
- * @param port @ref IxAtmLogicalPort [in] - Specifies the port on which the event has
- *                        occurred
- *
- * @param vcChanged @ref IxAtmmVc* [in] - Pointer to a structure which gives
- *                              details of the VC which has been added
- *                              or removed on the port
- */
-typedef void (*IxAtmmVcChangeCallback) (IxAtmmVcChangeEvent eventType,
-					IxAtmLogicalPort port,
-					const IxAtmmVc* vcChanged);
-
-/*
- * Variable declarations global to this file only. Externs are followed by
- * static variables.
- */
-
-/*
- * Extern function prototypes
- */
-
-/*
- * Function declarations
- */
-
-
-/** 
- * @ingroup IxAtmm
- *
- * @fn ixAtmmInit (void)
- *
- * @brief Interface to initialize the IxAtmm software component.  Can
- *         be called once only.
- *
- *  Must be called before any other IxAtmm API is called.
- *
- * @param "none"
- *
- *  @return @li  IX_SUCCESS : IxAtmm has been successfully initialized.
- *      Calls to other IxAtmm interfaces may now be performed.
- *  @return @li  IX_FAIL : IxAtmm has already been initialized.
- */
-PUBLIC IX_STATUS
-ixAtmmInit (void);
-
-/**  
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmUtopiaInit (unsigned numPorts,
-		  IxAtmmPhyMode phyMode,
-		  IxAtmmPortCfg portCfgs[],
-		  IxAtmmUtopiaLoopbackMode loopbackMode)
- *
- * @brief Interface to initialize the UTOPIA Level-2 ATM coprocessor
- *         for the specified number of physical ports.  The function
- *         must be called before the ixAtmmPortInitialize interface
- *         can operate successfully.
- *
- * @param numPorts unsigned [in] - Indicates the total number of logical
- *          ports that are active on the device.  Up to 12 ports are
- *          supported.
- *
- * @param phyMode @ref IxAtmmPhyMode [in] - Put the Utopia coprocessor in SPHY
- *        or MPHY mode.
- *
- * @param portCfgs[] @ref IxAtmmPortCfg [in] - Pointer to an array of elements
- *          detailing the UTOPIA specific port characteristics.  The
- *          length of the array must be equal to the number of ports
- *          activated.  ATM ports are referred to by the relevant
- *          offset in this array in all subsequent IxAtmm interface
- *          calls.
- *
- * @param loopbackMode @ref IxAtmmUtopiaLoopbackMode [in] - Value must be one of
- *          @ref IX_ATMM_UTOPIA_LOOPBACK_ENABLED or @ref
- *          IX_ATMM_UTOPIA_LOOPBACK_DISABLED indicating whether
- *          loopback should be enabled on the device.  Loopback can
- *          only be supported on a single PHY, therefore the numPorts
- *          parameter must be 1 if loopback is enabled.
- *
- * @return @li IX_SUCCESS : Indicates that the  UTOPIA device has been
- *      successfully initialized for the supplied ports.
- * @return @li IX_ATMM_RET_ALREADY_INITIALIZED : The UTOPIA device has
- *      already been initialized.
- * @return @li IX_FAIL : The supplied parameters are invalid or have been
- *     rejected by the UTOPIA-NPE device.
- *
- * @warning
- * This interface may only be called once.
- * Port identifiers are assumed to range from 0 to (numPorts - 1) in all 
- * instances.
- * In all subsequent calls to interfaces supplied by IxAtmm, the specified
- * port value is expected to represent the offset in the portCfgs array
- * specified in this interface.  i.e. The first port in this array will
- * subsequently be represented as port 0, the second port as port 1,
- * and so on.*/
-PUBLIC IX_STATUS
-ixAtmmUtopiaInit (unsigned numPorts,
-		  IxAtmmPhyMode phyMode,
-		  IxAtmmPortCfg portCfgs[],
-		  IxAtmmUtopiaLoopbackMode loopbackMode);
-
-
-/**   
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmPortInitialize (IxAtmLogicalPort port,
-		      unsigned txPortRate,
-		      unsigned rxPortRate)
- *
- * @brief The interface is called following @ref ixAtmmUtopiaInit ()
- *         and before calls to any other IxAtmm interface.  It serves
- *         to activate the registered ATM port with IxAtmm.
- *
- *  The transmit and receive port rates are specified in bits per
- *  second.  This translates to ATM cells per second according to the
- *  following formula: CellsPerSecond = portRate / (53*8)  The
- *  IXP400 device supports only 53 byte cells. The client shall make
- *  sure that the off-chip physical layer device has already been
- *  initialized.
- *
- *  IxAtmm will configure IxAtmdAcc and IxAtmSch to enable scheduling
- *  on the port.
- *
- *  This interface must be called once for each active port in the
- *  system.  The first time the interface is invoked, it will configure
- *  the mechanism by which the handling of transmit, transmit-done and
- *  receive are driven with the IxAtmdAcc component.
- *
- *  This function is reentrant.
- *
- *  @note The minimum tx rate that will be accepted is 424 bit/s which equates
- *        to 1 cell (53 bytes) per second.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be
- *          initialized.
- *
- * @param txPortRate unsigned [in] - Value specifies the
- *          transmit port rate for this port in
- *          bits/second.  This value is used by the ATM Scheduler
- *          component is evaluating VC access requests for the port.
- *
- * @param rxPortRate unsigned [in] - Value specifies the
- *          receive port rate for this port in bits/second.
- *
- * @return @li IX_SUCCESS : The specificed ATM port has been successfully
- *       initialized. IxAtmm is ready to accept VC registrations on
- *       this port.
- *
- * @return @li IX_ATMM_RET_ALREADY_INITIALIZED : ixAtmmPortInitialize has
- *       already been called successfully on this port.  The current
- *       call is rejected.
- *
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- *       input is not valid.  The request is rejected.
- *
- * @return @li IX_FAIL : IxAtmm could not initialize the port because the
- * inputs are not understood.
- *
- * @sa ixAtmmPortEnable, ixAtmmPortDisable
- *
- */
-PUBLIC IX_STATUS
-ixAtmmPortInitialize (IxAtmLogicalPort port,
-		      unsigned txPortRate,
-		      unsigned rxPortRate);
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmPortModify (IxAtmLogicalPort port,
-		  unsigned txPortRate,
-		  unsigned rxPortRate)
- *
- * @brief A client may call this interface to change the existing
- *         port rate (expressed in bits/second) on an established ATM
- *         port.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be
- *          initialized.
- *
- * @param txPortRate unsigned [in] -  Value specifies the``
- *          transmit port rate for this port in
- *          bits/second.  This value is used by the ATM Scheduler
- *          component is evaluating VC access requests for the port.
- *
- * @param rxPortRate unsigned [in] - Value specifies the
- *          receive port rate for this port in
- *          bits/second.
- *
- * @return @li IX_SUCCESS : The indicated ATM port rates have been
- *      successfully modified.
- *
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- *       input is not valid.  The request is rejected.
- *
- * @return @li IX_FAIL : IxAtmm could not update the port because the
- *       inputs are not understood, or the interface was called before
- * the port was initialized.  */
-PUBLIC IX_STATUS
-ixAtmmPortModify (IxAtmLogicalPort port,
-		  unsigned txPortRate,
-		  unsigned rxPortRate);
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmPortQuery (IxAtmLogicalPort port,
-		 unsigned *txPortRate,
-		 unsigned *rxPortRate);
-
- *
- * @brief The client may call this interface to request details on
- *          currently registered transmit and receive rates for an ATM
- *          port.
- *
- * @param port @ref IxAtmLogicalPort [in] - Value identifies the port from which the
- *          rate details are requested.
- *
- * @param *txPortRate unsigned [out] - Pointer to a value
- *          which will be filled with the value of the transmit port
- *          rate specified in bits/second.
- *
- * @param *rxPortRate unsigned [out] - Pointer to a value
- *          which will be filled with the value of the receive port
- *          rate specified in bits/second.
- *
- * @return @li IX_SUCCESS : The information requested on the specified
- *       port has been successfully supplied in the output.
- *
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- *       input is not valid.  The request is rejected.
- *
- * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
- *       NULL.
- *
- * @return @li IX_FAIL : IxAtmm could not update the port because the
- *       inputs are not understood, or the interface was called before
- *       the port was initialized.  */
-PUBLIC IX_STATUS
-ixAtmmPortQuery (IxAtmLogicalPort port,
-		 unsigned *txPortRate,
-		 unsigned *rxPortRate);
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmPortEnable(IxAtmLogicalPort port)
- *
- * @brief The client call this interface to enable transmit for an ATM
- *          port. At initialisation, all the ports are disabled.
- *
- * @param port @ref IxAtmLogicalPort [in] - Value identifies the port
- *
- * @return @li IX_SUCCESS : Transmission over this port is started.
- *
- * @return @li IX_FAIL : The port parameter is not valid, or the
- *       port is already enabled
- *
- * @note - When a port is disabled, Rx and Tx VC Connect requests will fail
- *
- * @note - This function uses system resources and should not be used
- *        inside an interrupt context.
- *
- * @sa ixAtmmPortDisable  */
-PUBLIC IX_STATUS
-ixAtmmPortEnable(IxAtmLogicalPort port);
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmPortDisable(IxAtmLogicalPort port)
- *
- * @brief The client call this interface to disable transmit for an ATM
- *          port. At initialisation, all the ports are disabled.
- *
- * @param port @ref IxAtmLogicalPort [in] - Value identifies the port
- *
- * @return @li IX_SUCCESS : Transmission over this port is stopped.
- *
- * @return @li IX_FAIL : The port parameter is not valid, or the
- *       port is already disabled
- *
- * @note - When a port is disabled, Rx and Tx VC Connect requests will fail
- *
- * @note - This function call does not stop RX traffic. It is supposed
- *        that this function is invoked when a serious problem
- *        is detected (e.g. physical layer broken). Then, the RX traffic
- *        is not passing.
- *
- * @note - This function is blocking until the hw acknowledge that the
- *        transmission is stopped.
- *
- * @note - This function uses system resources and should not be used
- *        inside an interrupt context.
- *
- * @sa ixAtmmPortEnable  */
-PUBLIC IX_STATUS
-ixAtmmPortDisable(IxAtmLogicalPort port);
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmVcRegister (IxAtmLogicalPort port,
-		  IxAtmmVc *vcToAdd,
-		  IxAtmSchedulerVcId *vcId)
- *
- * @brief This interface is used to register an ATM Virtual
- *         Connection on the specified ATM port.
- *
- *  Each call to this interface registers a unidirectional virtual
- *  connection with the parameters specified.  If a bi-directional VC
- *  is needed, the function should be called twice (once for each
- *  direction, Tx & Rx) where the VPI and VCI and port parameters in
- *  each call are identical.
- *
- *  With the addition of each new VC to a port, a series of
- *  callback functions are invoked by the IxAtmm component to notify
- *  possible external components of the change.  The callback functions
- *  are registered using the @ref ixAtmmVcChangeCallbackRegister interface.
- *
- *  The IxAtmSch component is notified of the registration of transmit
- *  VCs.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the specified VC is
- *          to be registered.
- *
- * @param *vcToAdd @ref IxAtmmVc [in] -  Pointer to an @ref IxAtmmVc structure
- *          containing a description of the VC to be registered. The
- *          client shall fill the vpi, vci and direction and relevant
- *          trafficDesc members of this structure before calling this
- *          function.
- *
- * @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which is filled
- *              with the per-port unique identifier value for this VC.
- *              This identifier will be required when a request is
- *              made to deregister or change this VC.  VC identifiers
- *              for transmit VCs will have a value between 0-43,
- *              i.e. 32 data Tx VCs + 12 OAM Tx Port VCs.
- *              Receive VCs will have a value between 44-66,
- *              i.e. 32 data Rx VCs + 1 OAM Rx VC.
- *
- * @return @li IX_SUCCESS : The VC has been successfully registered on
- *       this port. The VC is ready for a client to configure IxAtmdAcc
- *       for receive and transmit operations on the VC.
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- *       input is not valid or has not been initialized.  The request
- *       is rejected.
- * @return @li IX_ATMM_RET_INVALID_VC_DESCRIPTOR : The descriptor
- *       pointed to by vcToAdd is invalid.  The registration request
- *       is rejected.
- * @return @li IX_ATMM_RET_VC_CONFLICT : The VC requested conflicts with
- *      reserved VPI and/or VCI values or with another VC already activated
- *      on this port.
- * @return @li IX_ATMM_RET_PORT_CAPACITY_IS_FULL : The VC cannot be
- *       registered in the port becuase the port capacity is
- *       insufficient to support the requested ATM traffic contract.
- *       The registration request is rejected.
- * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
- *       NULL.
- *
- * @warning IxAtmm has no capability of signaling or negotiating a virtual
- *          connection. Negotiation of the admission of the VC to the network
- *          is beyond the scope of this function.  This is assumed to be
- *          performed by the calling client, if appropriate,
- *          before or after this function is called.
- */
-PUBLIC IX_STATUS
-ixAtmmVcRegister (IxAtmLogicalPort port,
-		  IxAtmmVc *vcToAdd,
-		  IxAtmSchedulerVcId *vcId);
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId)
- *
- * @brief Function called by a client to deregister a VC from the
- *         system.
- *
- *  With the removal of each new VC from a port, a series of
- *  registered callback functions are invoked by the IxAtmm component
- *  to notify possible external components of the change.  The callback
- *  functions are registered using the @ref ixAtmmVcChangeCallbackRegister.
- *
- *  The IxAtmSch component is notified of the removal of transmit VCs.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be
- *          removed is currently registered.
- *
- * @param vcId @ref IxAtmSchedulerVcId [in] - VC identifier value of the VC to
- *          be deregistered.  This value was supplied to the client when
-            the VC was originally registered.  This value can also be
-	    queried from the IxAtmm component through the @ref ixAtmmVcQuery
- *          interface.
- *
- * @return @li IX_SUCCESS : The specified VC has been successfully
- *       removed from this port.
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- *       input is not valid or has not been initialized.  The request
- *       is rejected.
- * @return @li IX_FAIL : There is no registered VC associated with the
- *       supplied identifier registered on this port. */
-PUBLIC IX_STATUS
-ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId);
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmVcQuery (IxAtmLogicalPort port,
-	       unsigned vpi,
-	       unsigned vci,
-	       IxAtmmVcDirection direction,
-	       IxAtmSchedulerVcId *vcId,
-	       IxAtmmVc *vcDesc)
- *
- * @brief This interface supplies information about an active VC on a
- *         particular port when supplied with the VPI, VCI and
- *         direction of that VC.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be
- *          queried is currently registered.
- *
- * @param vpi unsigned [in] - ATM VPI value of the requested VC.
- *
- * @param vci unsigned [in] - ATM VCI value of the requested VC.
- *
- * @param direction @ref IxAtmmVcDirection [in] - One of @ref
- *          IX_ATMM_VC_DIRECTION_TX or @ref IX_ATMM_VC_DIRECTION_RX
- *          indicating the direction (Tx or Rx) of the requested VC.
- *
- * @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which will be
- *              filled with the VC identifier value for the requested
- *              VC (as returned by @ref ixAtmmVcRegister), if it
- *              exists on this port.
- *
- * @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure
- *              which will be filled with the specific details of the
- *              requested VC, if it exists on this port.
- *
- * @return @li IX_SUCCESS : The specified VC has been found on this port
- *       and the requested details have been returned.
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- *       input is not valid or has not been initialized.  The request
- *       is rejected.
- * @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified
- *       port which matches the search criteria (VPI, VCI, direction)
- *       given.  No data is returned.
- * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
- *       NULL.
- *
- */
-PUBLIC IX_STATUS
-ixAtmmVcQuery (IxAtmLogicalPort port,
-	       unsigned vpi,
-	       unsigned vci,
-	       IxAtmmVcDirection direction,
-	       IxAtmSchedulerVcId *vcId,
-	       IxAtmmVc *vcDesc);
-
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc)
- *
- * @brief This interface supplies information about an active VC on a
- *         particular port when supplied with a vcId for that VC.
- *
- * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be
- *          queried is currently registered.
- *
- * @param vcId @ref IxAtmSchedulerVcId [in] - Value returned by @ref ixAtmmVcRegister which
- *          uniquely identifies the requested VC on this port.
- *
- * @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure
- *              which will be filled with the specific details of the
- *              requested VC, if it exists on this port.
- *
- * @return @li IX_SUCCESS : The specified VC has been found on this port
- *       and the requested details have been returned.
- * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the
- *       input is not valid or has not been initialized.  The request
- *       is rejected.
- * @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified
- *       port which matches the supplied identifier.  No data is
- *       returned.
- * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was
- *       NULL.
- */
-PUBLIC IX_STATUS
-ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc);
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback)
- *
- * @brief This interface is invoked to supply a function to IxAtmm
- *         which will be called to notify the client if a new VC is
- *         registered with IxAtmm or an existing VC is removed.
- *
- * The callback, when invoked, will run within the context of the call
- * to @ref ixAtmmVcRegister or @ref ixAtmmVcDeregister which caused
- * the change of state.
- *
- * A maximum of 32 calbacks may be registered in with IxAtmm.
- *
- * @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies
- *          with the @ref IxAtmmVcChangeCallback definition.  This
- *          function will be invoked by IxAtmm with the appropiate
- *          parameters for the relevant VC when any VC has been
- *          registered or deregistered with IxAtmm.
- *
- * @return @li IX_SUCCESS : The specified callback has been registered
- *      successfully with IxAtmm and will be invoked when appropriate.
- * @return @li IX_FAIL : Either the supplied callback is invalid, or
- *      IxAtmm has already registered 32 and connot accommodate
- *      any further registrations of this type.  The request is
- *      rejected.
- *
- * @warning The client must not call either the @ref
- *          ixAtmmVcRegister or @ref ixAtmmVcDeregister interfaces
- *          from within the supplied callback function.  */
-PUBLIC IX_STATUS ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback);
-
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback)
- *
- * @brief This interface is invoked to deregister a previously supplied
- *         callback function.
- *
- * @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies
- *          with the @ref IxAtmmVcChangeCallback definition.  This
- *          function will removed from the table of callbacks.
- *
- * @return @li IX_SUCCESS : The specified callback has been deregistered
- *      successfully from IxAtmm.
- * @return @li IX_FAIL : Either the supplied callback is invalid, or
- *      is not currently registered with IxAtmm.
- */
-PUBLIC IX_STATUS
-ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback);
-
-/**    
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmUtopiaStatusShow (void)
- * 
- *  @brief Display utopia status counters
- *
- * @param "none"
- *
- * @return @li IX_SUCCESS : Show function was successful
- * @return @li IX_FAIL : Internal failure
- */
-PUBLIC IX_STATUS
-ixAtmmUtopiaStatusShow (void);
-
-/**     
- * @ingroup IxAtmm
- * 
- * @fn ixAtmmUtopiaCfgShow (void)
- *
- * @brief Display utopia information(config registers and status registers)
- *
- * @param "none"
- *
- * @return @li IX_SUCCESS : Show function was successful
- * @return @li IX_FAIL : Internal failure
- */
-PUBLIC IX_STATUS
-ixAtmmUtopiaCfgShow (void);
-
-#endif
-/* IXATMM_H */
-
-/** @} */
diff --git a/drivers/net/npe/include/IxDmaAcc.h b/drivers/net/npe/include/IxDmaAcc.h
deleted file mode 100644
index a62e72c..0000000
--- a/drivers/net/npe/include/IxDmaAcc.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/**
- * @file IxDmaAcc.h
- *
- * @date	15 October 2002 
- *
- * @brief   API of the IXP400 DMA Access Driver Component (IxDma)
- *
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/*---------------------------------------------------------------------
-   Doxygen group definitions
-  ---------------------------------------------------------------------*/
-
-#ifndef IXDMAACC_H
-#define IXDMAACC_H
-
-#include "IxOsal.h"
-#include "IxNpeDl.h"
-/**
- * @defgroup IxDmaTypes IXP400 DMA Types (IxDmaTypes)
- * @brief The common set of types used in the DMA component
- * @{
- */
-
-/** 
- * @ingroup IxDmaTypes
- * @enum IxDmaReturnStatus
- * @brief Dma return status definitions
- */
-typedef enum
-{
-    IX_DMA_SUCCESS = IX_SUCCESS,  /**< DMA Transfer Success */
-    IX_DMA_FAIL = IX_FAIL,        /**< DMA Transfer Fail */
-    IX_DMA_INVALID_TRANSFER_WIDTH, /**< Invalid transfer width */
-    IX_DMA_INVALID_TRANSFER_LENGTH, /**< Invalid transfer length */
-    IX_DMA_INVALID_TRANSFER_MODE, /**< Invalid transfer mode */
-    IX_DMA_INVALID_ADDRESS_MODE, /**< Invalid address mode */
-    IX_DMA_REQUEST_FIFO_FULL  /**< DMA request queue is full */
-} IxDmaReturnStatus;
-
-/** 
- * @ingroup IxDmaTypes
- * @enum IxDmaTransferMode
- * @brief Dma transfer mode definitions
- * @note Copy and byte swap, and copy and reverse modes only support multiples of word data length.
- */
-typedef enum
-{
-    IX_DMA_COPY_CLEAR = 0,      /**< copy and clear source*/
-    IX_DMA_COPY,                /**< copy */
-    IX_DMA_COPY_BYTE_SWAP,      /**< copy and byte swap (endian) */
-    IX_DMA_COPY_REVERSE,        /**< copy and reverse */
-    IX_DMA_TRANSFER_MODE_INVALID /**< Invalid transfer mode */
-} IxDmaTransferMode;
-
-/** 
- * @ingroup IxDmaTypes
- * @enum IxDmaAddressingMode
- * @brief Dma addressing mode definitions
- * @note Fixed source address to fixed destination address addressing mode is not supported.
- */
-typedef enum
-{
-    IX_DMA_INC_SRC_INC_DST = 0, /**< Incremental source address to incremental destination address */
-    IX_DMA_INC_SRC_FIX_DST,     /**< Incremental source address to incremental destination address */
-    IX_DMA_FIX_SRC_INC_DST,     /**< Incremental source address to incremental destination address */
-    IX_DMA_FIX_SRC_FIX_DST,     /**< Incremental source address to incremental destination address */
-    IX_DMA_ADDRESSING_MODE_INVALID /**< Invalid Addressing Mode */
-} IxDmaAddressingMode;
-
-/** 
- * @ingroup IxDmaTypes
- * @enum IxDmaTransferWidth
- * @brief Dma transfer width definitions
- * @Note Fixed addresses (either source or destination) do not support burst transfer width.
- */
-typedef enum
-{
-    IX_DMA_32_SRC_32_DST = 0,  /**< 32-bit src to 32-bit dst */
-    IX_DMA_32_SRC_16_DST,      /**< 32-bit src to 16-bit dst */
-    IX_DMA_32_SRC_8_DST,       /**< 32-bit src to 8-bit dst */
-    IX_DMA_16_SRC_32_DST,      /**< 16-bit src to 32-bit dst */
-    IX_DMA_16_SRC_16_DST,      /**< 16-bit src to 16-bit dst */
-    IX_DMA_16_SRC_8_DST,       /**< 16-bit src to 8-bit dst */
-    IX_DMA_8_SRC_32_DST,       /**< 8-bit src to 32-bit dst */
-    IX_DMA_8_SRC_16_DST,       /**< 8-bit src to 16-bit dst */
-    IX_DMA_8_SRC_8_DST,        /**< 8-bit src to 8-bit dst */
-    IX_DMA_8_SRC_BURST_DST,    /**< 8-bit src to burst dst - Not supported for fixed destination address */
-    IX_DMA_16_SRC_BURST_DST,   /**< 16-bit src to burst dst - Not supported for fixed destination address */
-    IX_DMA_32_SRC_BURST_DST,   /**< 32-bit src to burst dst - Not supported for fixed destination address */
-    IX_DMA_BURST_SRC_8_DST,    /**< burst src to 8-bit dst  - Not supported for fixed source address */
-    IX_DMA_BURST_SRC_16_DST,   /**< burst src to 16-bit dst - Not supported for fixed source address */
-    IX_DMA_BURST_SRC_32_DST,   /**< burst src to 32-bit dst - Not supported for fixed source address*/
-    IX_DMA_BURST_SRC_BURST_DST, /**< burst src to burst dst  - Not supported for fixed source and destination address
-*/
-    IX_DMA_TRANSFER_WIDTH_INVALID /**< Invalid transfer width */
-} IxDmaTransferWidth;
-
-/** 
- * @ingroup IxDmaTypes
- * @enum IxDmaNpeId
- * @brief NpeId numbers to identify NPE A, B or C
- */
-typedef enum
-{
-    IX_DMA_NPEID_NPEA = 0, /**< Identifies NPE A */
-    IX_DMA_NPEID_NPEB,     /**< Identifies NPE B */
-    IX_DMA_NPEID_NPEC,     /**< Identifies NPE C */
-    IX_DMA_NPEID_MAX       /**< Total Number of NPEs */
-} IxDmaNpeId;
-/* @} */
-/**
- * @defgroup IxDmaAcc IXP400 DMA Access Driver (IxDmaAcc) API
- *
- * @brief The public API for the IXP400 IxDmaAcc component
- *
- * @{
- */
-
-/**
- * @ingroup IxDmaAcc
- * @brief DMA Request Id type
- */
-typedef UINT32 IxDmaAccRequestId;
-
-/**
- * @ingroup IxDmaAcc
- * @def IX_DMA_REQUEST_FULL
- * @brief DMA request queue is full
- * This constant is a return value used to tell the user that the IxDmaAcc
- * queue is full.
- *
- */
-#define IX_DMA_REQUEST_FULL 16
-
-/**
- * @ingroup	IxDmaAcc
- * @brief       DMA completion notification
- * This function is called to notify a client that the DMA has been completed
- * @param status @ref IxDmaReturnStatus [out] - reporting to client
- *
- */
-typedef void (*IxDmaAccDmaCompleteCallback) (IxDmaReturnStatus status);
-
-/**
- * @ingroup	IxDmaAcc
- * 
- * @fn ixDmaAccInit(IxNpeDlNpeId npeId)
- * 
- * @brief	Initialise the DMA Access component
- * This function will initialise the DMA Access component internals
- * @param npeId @ref IxNpeDlNpeId [in] - NPE to use for Dma Transfer
- * @return @li IX_SUCCESS succesfully initialised the component
- * @return @li IX_FAIL Initialisation failed for some unspecified
- * internal reason.
- */
-PUBLIC IX_STATUS
-ixDmaAccInit(IxNpeDlNpeId npeId);
-
-/**
- * @ingroup	IxDmaAcc
- * 
- * @fn ixDmaAccDmaTransfer(
-    IxDmaAccDmaCompleteCallback callback,
-    UINT32 SourceAddr,
-    UINT32 DestinationAddr,
-    UINT16 TransferLength,
-    IxDmaTransferMode TransferMode,
-    IxDmaAddressingMode AddressingMode,
-    IxDmaTransferWidth TransferWidth)
- *
- * @brief       Perform DMA transfer
- * This function will perform DMA transfer between devices within the
- * IXP400 memory map.
- * @note The following are restrictions for IxDmaAccDmaTransfer:
- *      @li The function is non re-entrant.
- *      @li The function assumes host devices are operating in big-endian mode.
- *      @li Fixed address does not suport burst transfer width
- *      @li Fixed source address to fixed destinatiom address mode is not suported
- *      @li The incrementing source address for expansion bus will not support a burst transfer width and copy and clear mode
- *
- * @param callback @ref IxDmaAccDmaCompleteCallback [in] - function pointer to be stored and called when the DMA transfer is completed. This cannot be NULL.
- * @param SourceAddr UINT32 [in] -	Starting address of DMA source. Must be a valid IXP400 memory map address.
- * @param DestinationAddr UINT32 [in] - Starting address of DMA destination. Must be a valid IXP400 memory map address.
- * @param TransferLength UINT16 [in] - The size of DMA data transfer. The range must be from 1-64Kbyte
- * @param TransferMode @ref IxDmaTransferMode [in] - The DMA transfer mode
- * @param AddressingMode @ref IxDmaAddressingMode [in] - The DMA addressing mode
- * @param TransferWidth	@ref IxDmaTransferWidth [in] - The DMA transfer width
- *
- * @return @li IX_DMA_SUCCESS	Notification that the DMA request is succesful
- * @return @li IX_DMA_FAIL	IxDmaAcc not yet initialised or some internal error has occured
- * @return @li IX_DMA_INVALID_TRANSFER_WIDTH Transfer width is nit valid
- * @return @li IX_DMA_INVALID_TRANSFER_LENGTH Transfer length outside of valid range
- * @return @li IX_DMA_INVALID_TRANSFER_MODE Transfer Mode not valid
- * @return @li IX_DMA_REQUEST_FIFO_FULL IxDmaAcc request queue is full
- */
-PUBLIC IxDmaReturnStatus
-ixDmaAccDmaTransfer(
-    IxDmaAccDmaCompleteCallback callback,
-    UINT32 SourceAddr,
-    UINT32 DestinationAddr,
-    UINT16 TransferLength,
-    IxDmaTransferMode TransferMode,
-    IxDmaAddressingMode AddressingMode,
-    IxDmaTransferWidth TransferWidth);
-/**
- * @ingroup IxDmaAcc
- *
- * @fn ixDmaAccShow(void)
- *
- * @brief Display some component information for debug purposes
- * Show some internal operation information relating to the DMA service.
- * At a minimum the following will show.
- * - the number of the DMA pend (in queue)
- * @param None
- * @return @li None
- */
-PUBLIC IX_STATUS
-ixDmaAccShow(void);
-
-#endif /* IXDMAACC_H */
-
diff --git a/drivers/net/npe/include/IxEthAcc.h b/drivers/net/npe/include/IxEthAcc.h
deleted file mode 100644
index cc7e010..0000000
--- a/drivers/net/npe/include/IxEthAcc.h
+++ /dev/null
@@ -1,2488 +0,0 @@
-/** @file    IxEthAcc.h
- *
- * @brief this file contains the public API of @ref IxEthAcc component
- *
- * Design notes:
- * The IX_OSAL_MBUF address is to be specified on bits [31-5] and must 
- * be cache aligned (bits[4-0] cleared)
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- *
- */
-
-#ifndef IxEthAcc_H
-#define IxEthAcc_H
-
-#include <IxOsBuffMgt.h>
-#include <IxTypes.h>
-
-/**
- * @defgroup IxEthAcc IXP400 Ethernet Access (IxEthAcc) API
- *
- * @brief ethAcc is a library that does provides access to the internal IXP400 10/100Bt Ethernet MACs.
- *
- *@{
- */
-
-/**
- * @ingroup IxEthAcc
- * @brief Definition of the Ethernet Access status
- */
-typedef enum /* IxEthAccStatus */
-{
-    IX_ETH_ACC_SUCCESS = IX_SUCCESS, /**< return success*/
-    IX_ETH_ACC_FAIL = IX_FAIL, /**< return fail*/
-    IX_ETH_ACC_INVALID_PORT, /**< return invalid port*/
-    IX_ETH_ACC_PORT_UNINITIALIZED, /**< return uninitialized*/
-    IX_ETH_ACC_MAC_UNINITIALIZED, /**< return MAC uninitialized*/
-    IX_ETH_ACC_INVALID_ARG, /**< return invalid arg*/
-    IX_ETH_TX_Q_FULL, /**< return tx queue is full*/
-    IX_ETH_ACC_NO_SUCH_ADDR /**< return no such address*/
-} IxEthAccStatus;
-
-/**
- * @ingroup IxEthAcc
- * @enum IxEthAccPortId
- * @brief Definition of the IXP400 Mac Ethernet device.
- */
-typedef enum  
-{
-	IX_ETH_PORT_1 = 0, /**< Ethernet Port 1 */
-	IX_ETH_PORT_2 = 1  /**< Ethernet port 2 */
-	,IX_ETH_PORT_3 = 2 /**< Ethernet port 3 */
-} IxEthAccPortId;
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETH_ACC_NUMBER_OF_PORTS
- *
- * @brief  Definition of the number of ports
- *
- */
-#ifdef __ixp46X
-#define IX_ETH_ACC_NUMBER_OF_PORTS (3)
-#else
-#define IX_ETH_ACC_NUMBER_OF_PORTS (2)
-#endif
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_IEEE803_MAC_ADDRESS_SIZE
- *
- * @brief  Definition of the size of the MAC address
- *
- */
-#define IX_IEEE803_MAC_ADDRESS_SIZE (6)
-
-
-/**
- *
- * @brief Definition of the IEEE 802.3 Ethernet MAC address structure.
- *
- * The data should be packed with bytes xx:xx:xx:xx:xx:xx 
- * @note
- * The data must be packed in network byte order.
- */
-typedef struct  
-{
-    UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< MAC address */
-} IxEthAccMacAddr;
-
-/**
- * @ingroup IxEthAcc
- * @def IX_ETH_ACC_NUM_TX_PRIORITIES
- * @brief Definition of the number of transmit priorities
- * 
- */
-#define IX_ETH_ACC_NUM_TX_PRIORITIES (8)
-
-/**
- * @ingroup IxEthAcc
- * @enum IxEthAccTxPriority
- * @brief Definition of the relative priority used to transmit a frame
- * 
- */
-typedef enum  
-{
-	IX_ETH_ACC_TX_PRIORITY_0 = 0, /**<Lowest Priority submission */
-	IX_ETH_ACC_TX_PRIORITY_1 = 1, /**<submission prority of 1 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_2 = 2, /**<submission prority of 2 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_3 = 3, /**<submission prority of 3 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_4 = 4, /**<submission prority of 4 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_5 = 5, /**<submission prority of 5 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_6 = 6, /**<submission prority of 6 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_7 = 7, /**<Highest priority submission */
-
-	IX_ETH_ACC_TX_DEFAULT_PRIORITY = IX_ETH_ACC_TX_PRIORITY_0 /**< By default send all 
-								 packets with lowest priority */
-} IxEthAccTxPriority;
-
-/**
- * @ingroup IxEthAcc
- * @enum IxEthAccRxFrameType
- * @brief Identify the type of a frame.
- * 
- * @sa IX_ETHACC_NE_FLAGS
- * @sa IX_ETHACC_NE_LINKMASK
- */
-typedef enum  
-{
-	IX_ETHACC_RX_LLCTYPE = 0x00, /**< 802.3 - 8802, with LLC/SNAP */
-	IX_ETHACC_RX_ETHTYPE = 0x10, /**< 802.3 (Ethernet) without LLC/SNAP */
-	IX_ETHACC_RX_STATYPE = 0x20, /**< 802.11, AP <=> STA */
-	IX_ETHACC_RX_APTYPE  = 0x30  /**< 802.11, AP <=> AP */
-} IxEthAccRxFrameType;
-
-/**
- * @ingroup IxEthAcc
- * @enum IxEthAccDuplexMode
- * @brief Definition to provision the duplex mode of the MAC. 
- * 
- */
-typedef enum
-{
-    IX_ETH_ACC_FULL_DUPLEX, /**< Full duplex operation of the MAC */
-    IX_ETH_ACC_HALF_DUPLEX  /**< Half duplex operation of the MAC */
-} IxEthAccDuplexMode;
-
-
-/**
- * @ingroup IxEthAcc
- * @struct IxEthAccNe
- * @brief Definition of service-specific informations.
- * 
- * This structure defines the Ethernet service-specific informations
- * and enable QoS and VLAN features.
- */
-typedef struct
-{
-    UINT32 ixReserved_next;    /**< reserved for chaining */
-    UINT32 ixReserved_lengths; /**< reserved for buffer lengths */
-    UINT32 ixReserved_data;    /**< reserved for buffer pointer */
-    UINT8  ixDestinationPortId; /**< Destination portId for this packet, if known by NPE */
-    UINT8  ixSourcePortId; /**< Source portId for this packet */
-    UINT16 ixFlags;        /**< BitField of option for this frame */
-    UINT8  ixQoS;          /**< QoS class of the frame */
-    UINT8  ixReserved;     /**< reserved */
-    UINT16 ixVlanTCI;      /**< Vlan TCI */
-    UINT8  ixDestMac[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< Destination MAC address */
-    UINT8  ixSourceMac[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< Source MAC address */
-} IxEthAccNe;
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_PORT_UNKNOWN
- *
- * @brief  Contents of the field @a IX_ETHACC_NE_DESTPORTID when no
- * destination port can be found by the NPE for this frame.
- *
- */
-#define IX_ETHACC_NE_PORT_UNKNOWN   (0xff)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_DESTMAC
- *
- * @brief The location of the destination MAC address in the Mbuf header.
- *
- */
-#define IX_ETHACC_NE_DESTMAC(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixDestMac
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_SOURCEMAC
- *
- * @brief The location of the source MAC address in the Mbuf header.
- *
- */
-#define IX_ETHACC_NE_SOURCEMAC(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixSourceMac
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_VLANTCI
- *
- * @brief The VLAN Tag Control Information associated with this frame
- * 
- * The VLAN Tag Control Information associated with this frame. On Rx
- * path, this field is extracted from the packet header.
- * On Tx path, the value of this field is inserted in the frame when
- * the port is configured to insert or replace vlan tags in the 
- * egress frames.
- *
- * @sa IX_ETHACC_NE_FLAGS
- */
-#define IX_ETHACC_NE_VLANTCI(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixVlanTCI
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_SOURCEPORTID
- *
- * @brief The port where this frame came from.
- *
- * The port where this frame came from. This field is set on receive
- * with the port information. This field is ignored on Transmit path.
- */
-#define IX_ETHACC_NE_SOURCEPORTID(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixSourcePortId
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_DESTPORTID
- *
- * @brief The destination port where this frame should be sent.
- *
- * The destination port where this frame should be sent.
- *
- * @li In the transmit direction, this field contains the destination port
- * and is ignored unless @a IX_ETHACC_NE_FLAG_DST is set.
- * 
- * @li In the receive direction, this field contains the port where the
- * destination MAC addresses has been learned. If the destination
- * MAC address is unknown, then this value is set to the reserved value
- * @a IX_ETHACC_NE_PORT_UNKNOWN
- *
- */
-#define IX_ETHACC_NE_DESTPORTID(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixDestinationPortId
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_QOS
- *
- * @brief QualityOfService class (QoS) for this received frame.
- *
- */
-#define IX_ETHACC_NE_QOS(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixQoS
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_FLAGS
- *
- * @brief Bit Mask of the different flags associated with a frame
- * 
- * The flags are the bit-oring combination 
- * of the following different fields :
- *
- *      @li IP flag (Rx @a IX_ETHACC_NE_IPMASK)
- *      @li Spanning Tree flag (Rx @a IX_ETHACC_NE_STMASK)
- *      @li Link layer type (Rx and Tx @a IX_ETHACC_NE_LINKMASK)
- *      @li VLAN Tagged Frame (Rx @a IX_ETHACC_NE_VLANMASK)
- *      @li New source MAC address (Rx @a IX_ETHACC_NE_NEWSRCMASK)
- *      @li Multicast flag (Rx @a IX_ETHACC_NE_MCASTMASK)
- *      @li Broadcast flag (Rx @a IX_ETHACC_NE_BCASTMASK)
- *      @li Destination port flag (Tx @a IX_ETHACC_NE_PORTMASK)
- *      @li Tag/Untag Tx frame (Tx @a IX_ETHACC_NE_TAGMODEMASK)
- *      @li Overwrite destination port (Tx @a IX_ETHACC_NE_PORTOVERMASK)
- *      @li Filtered frame (Rx @a IX_ETHACC_NE_STMASK)
- *      @li VLAN Enabled (Rx and Tx @a IX_ETHACC_NE_VLANENABLEMASK)
- */
-#define IX_ETHACC_NE_FLAGS(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixFlags
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_BCASTMASK
- *
- * @brief This mask defines if a received frame is a broadcast frame.
- *
- * This mask defines if a received frame is a broadcast frame.
- * The BCAST flag is set when the destination MAC address of 
- * a frame is broadcast.
- *
- * @sa IX_ETHACC_NE_FLAGS 
- *
- */
-#define IX_ETHACC_NE_BCASTMASK      (0x1)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_MCASTMASK
- *
- * @brief This mask defines if a received frame is a multicast frame.
- *
- * This mask defines if a received frame is a multicast frame.
- * The MCAST flag is set when the destination MAC address of 
- * a frame is multicast.
- *
- * @sa IX_ETHACC_NE_FLAGS 
- *
- */
-#define IX_ETHACC_NE_MCASTMASK      (0x1 << 1)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_IPMASK
- *
- * @brief This mask defines if a received frame is a IP frame.
- *
- * This mask applies to @a IX_ETHACC_NE_FLAGS and defines if a received 
- * frame is a IP frame. The IP flag is set on Rx direction, depending on 
- * the frame contents. The flag is set when the length/type field of a 
- * received frame is 0x8000.
- *
- * @sa IX_ETHACC_NE_FLAGS
- *
- */
-#define IX_ETHACC_NE_IPMASK         (0x1 << 2)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_VLANMASK
- *
- * @brief This mask defines if a received frame is VLAN tagged.
- *
- * This mask defines if a received frame is VLAN tagged.
- * When set, the Rx frame is VLAN-tagged and the tag value 
- * is available thru @a IX_ETHACC_NE_VLANID.
- * Note that when sending frames which are already tagged
- * this flag should be set, to avoid inserting another VLAN tag.
- *
- * @sa IX_ETHACC_NE_FLAGS 
- * @sa IX_ETHACC_NE_VLANID
- *
- */
-#define IX_ETHACC_NE_VLANMASK       (0x1 << 3)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_LINKMASK
- *
- * @brief This mask is the link layer protocol indicator
- *
- * This mask applies to @a IX_ETHACC_NE_FLAGS.
- * It reflects the state of a frame as it exits an NPE on the Rx path
- * or enters an NPE on the Tx path. Its values are as follows:
- *      @li 0x00 - IEEE802.3 - 8802 (Rx) / IEEE802.3 - 8802 (Tx)
- *      @li 0x01 - IEEE802.3 - Ethernet (Rx) / IEEE802.3 - Ethernet (Tx)
- *      @li 0x02 - IEEE802.11 AP -> STA (Rx) / IEEE802.11 STA -> AP (Tx)
- *      @li 0x03 - IEEE802.11 AP -> AP (Rx) / IEEE802.11 AP->AP (Tx)
- *
- * @sa IX_ETHACC_NE_FLAGS
- *
- */
-#define IX_ETHACC_NE_LINKMASK       (0x3 << 4)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_STMASK
- *
- * @brief This mask defines if a received frame is a Spanning Tree frame.
- *
- * This mask applies to @a IX_ETHACC_NE_FLAGS.
- * On rx direction, it defines if a received if frame is a Spanning Tree frame.
- * Setting this fkag on transmit direction overrides the port settings 
- * regarding the VLAN options and 
- *
- * @sa IX_ETHACC_NE_FLAGS
- *
- */
-#define IX_ETHACC_NE_STMASK         (0x1 << 6)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_FILTERMASK
- *
- * @brief This bit indicates whether a frame has been filtered by the Rx service.
- *
- * This mask applies to @a IX_ETHACC_NE_FLAGS.
- * Certain frames, which should normally be fully filtered by the NPE to due
- * the destination MAC address being on the same segment as the Rx port are
- * still forwarded to the XScale (although the payload is invalid) in order
- * to learn the MAC address of the transmitting station, if this is unknown.
- * Normally EthAcc will filter and recycle these framess internally and no
- * frames with the FILTER bit set will be received by the client.
- *
- * @sa IX_ETHACC_NE_FLAGS
- *
- */
-#define IX_ETHACC_NE_FILTERMASK     (0x1 << 7)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_PORTMASK
- *
- * @brief This mask defines the rule to transmit a frame
- *
- * This mask defines the rule to transmit a frame. When set, a frame
- * is transmitted to the destination port as set by the macro
- * @a IX_ETHACC_NE_DESTPORTID. If not set, the destination port 
- * is searched using the destination MAC address.
- *
- * @note This flag is meaningful only for multiport Network Engines.
- * 
- * @sa IX_ETHACC_NE_FLAGS 
- * @sa IX_ETHACC_NE_DESTPORTID
- *
- */
-#define IX_ETHACC_NE_PORTOVERMASK   (0x1 << 8)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_TAGMODEMASK
- *
- * @brief This mask defines the tagging rules to apply to a transmit frame.
- *
- * This mask defines the tagging rules to apply to a transmit frame
- * regardless of the default setting for a port. When used together 
- * with @a IX_ETHACC_NE_TAGOVERMASK and when set, the 
- * frame will be tagged prior to transmission. When not set,
- * the frame will be untagged prior to transmission. This is accomplished
- * irrespective of the Egress tagging rules, constituting a per-frame override.
- *
- * @sa IX_ETHACC_NE_FLAGS
- * @sa IX_ETHACC_NE_TAGOVERMASK 
- *
- */
-#define IX_ETHACC_NE_TAGMODEMASK    (0x1 << 9)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_TAGOVERMASK
- *
- * @brief This mask defines the rule to transmit a frame
- *
- * This mask defines the rule to transmit a frame. When set, the
- * default transmit rules of a port are overriden.
- * When not set, the default rules as set by @ref IxEthDB should apply.
- *
- * @sa IX_ETHACC_NE_FLAGS
- * @sa IX_ETHACC_NE_TAGMODEMASK
- *
- */
-#define IX_ETHACC_NE_TAGOVERMASK    (0x1 << 10)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_VLANENABLEMASK
- *
- * @brief This mask defines if a frame is a VLAN frame or not
- *
- * When set, frames undergo normal VLAN processing on the Tx path
- * (membership filtering, tagging, tag removal etc). If this flag is
- * not set, the frame is considered to be a regular non-VLAN frame
- * and no VLAN processing will be performed.
- *
- * Note that VLAN-enabled NPE images will always set this flag in all
- * Rx frames, and images which are not VLAN enabled will clear this
- * flag for all received frames.
- *
- * @sa IX_ETHACC_NE_FLAGS
- *
- */
-#define IX_ETHACC_NE_VLANENABLEMASK (0x1 << 14)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_NEWSRCMASK
- *
- * @brief This mask defines if a received frame has been learned.
- *
- * This mask defines if the source MAC address of a frame is 
- * already known. If the bit is set, the source MAC address was
- * unknown to the NPE at the time the frame was received.
- *
- * @sa IX_ETHACC_NE_FLAGS 
- *
- */
-#define IX_ETHACC_NE_NEWSRCMASK     (0x1 << 15)
-
-/**
- * @ingroup IxEthAcc
- *
- * @brief This defines the recommanded minimum size of MBUF's submitted
- * to the frame receive service.
- *
- */
-#define IX_ETHACC_RX_MBUF_MIN_SIZE (2048)
-
-/**
- * @ingroup IxEthAcc
- *
- * @brief This defines the highest MII address of any attached PHYs 
- * 
- * The maximum number for PHY address is 31, add on for range checking.
- *
- */
-#define IXP425_ETH_ACC_MII_MAX_ADDR   32
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccInit(void)
- * 
- * @brief Initializes the IXP400 Ethernet Access Service.
- * 
- * @li Reentrant    - no
- * @li ISR Callable - no
- * 
- * This should be called once per module initialization.
- * @pre
- *   The NPE must first be downloaded with the required microcode which supports all
- *   required features.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL	:  Service has failed to initialize.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccInit(void);
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccUnload(void)
- * 
- * @brief Unload the Ethernet Access Service.
- * 
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @return void 
- *
- * <hr>
- */
-PUBLIC void ixEthAccUnload(void);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortInit( IxEthAccPortId portId)
- *
- * @brief Initializes an NPE/Ethernet MAC Port.
- *
- * The NPE/Ethernet port initialisation includes the following steps
- * @li Initialize the NPE/Ethernet MAC hardware.
- * @li Verify NPE downloaded and operational.
- * @li The NPE shall be available for usage once this API returns.
- * @li Verify that the Ethernet port is present before initializing
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * This should be called once per mac device.
- * The NPE/MAC shall be in disabled state after init.
- *
- * @pre
- *   The component must be initialized via @a ixEthAccInit
- *   The NPE must first be downloaded with the required microcode which supports all
- *   required features.
- *
- * Dependant on Services: (Must be initialized before using this service may be initialized)
- *	ixNPEmh - NPE Message handling service.
- *	ixQmgr	- Queue Manager component.
- *
- * @param portId  @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS: if the ethernet port is not present, a warning is issued.
- * @li @a IX_ETH_ACC_FAIL : The NPE processor has failed to initialize.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortInit(IxEthAccPortId portId);
-
-
-/*************************************************************************
-
- #####     ##     #####    ##            #####     ##     #####  #    #
- #    #   #  #      #     #  #           #    #   #  #      #    #    #
- #    #  #    #     #    #    #          #    #  #    #     #    ######
- #    #  ######     #    ######          #####   ######     #    #    #
- #    #  #    #     #    #    #          #       #    #     #    #    #
- #####   #    #     #    #    #          #       #    #     #    #    #
-
-*************************************************************************/
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxFrameSubmit( 
-    IxEthAccPortId portId,
-    IX_OSAL_MBUF *buffer, 
-    IxEthAccTxPriority priority)
- * 
- * @brief This function shall be used to submit MBUFs buffers for transmission on a particular MAC device. 
- *
- * When the frame is transmitted, the buffer shall be returned thru the 
- * callback @a IxEthAccPortTxDoneCallback.
- *
- * In case of over-submitting, the order of the frames on the 
- * network may be modified.
- *
- * Buffers shall be not queued for transmission if the port is disabled.
- * The port can be enabled using @a ixEthAccPortEnable
- *
- * 
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- *
- * @pre 
- *  @a ixEthAccPortTxDoneCallbackRegister must be called to register a function to allow this service to
- *   return the buffer to the calling service. 
- * 
- * @note 
- *  If the buffer submit fails for any reason the user has retained ownership of the buffer.
- *
- * @param portId @ref IxEthAccPortId [in] - MAC port ID to transmit Ethernet frame on.
- * @param buffer @ref IX_OSAL_MBUF [in] - pointer to an MBUF formatted buffer. Chained buffers are supported for transmission.
- *             Chained packets are not supported and the field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is ignored. 
- * @param priority @ref IxEthAccTxPriority [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL  : Failed to queue frame for transmission. 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-
-PUBLIC IxEthAccStatus ixEthAccPortTxFrameSubmit( 
-    IxEthAccPortId portId,
-    IX_OSAL_MBUF *buffer, 
-    IxEthAccTxPriority priority);
-
-/**
- * @ingroup IxEthAcc
- *
- * @brief Function prototype for Ethernet Tx Buffer Done callback. Registered 
- *  via @a ixEthAccTxBufferDoneCallbackRegister 
- * 
- * This function is called once the previously submitted buffer is no longer required by this service.
- * It may be returned upon successful transmission of the frame or during the shutdown of 
- * the port prior to the transmission of a queued frame.
- * The calling of this registered function is not a guarantee of successful transmission of the buffer.
- *
- *  
- * @li Reentrant    - yes , The user provided function should be reentrant.
- * @li ISR Callable - yes , The user provided function must be callable from an ISR.
- *
- *
- * <b>Calling Context </b>: 
- * @par
- *   This callback is called in the context of the queue manager dispatch loop @a ixQmgrgrDispatcherLoopRun
- *   within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. 
- *   The decision is system specific.
- *
- * @param callbackTag UINT32 [in] - This tag is that provided when the callback was registered for a particular MAC 
- * via @a ixEthAccPortTxDoneCallbackRegister. It allows the same callback to be used for multiple MACs.
- * @param mbuf @ref IX_OSAL_MBUF [in] - Pointer to the Tx mbuf descriptor. 
- * 
- * @return void
- *
- * @note
- * The field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is modified by the access layer and reset to NULL.
- *
- * <hr>
- */
-typedef void (*IxEthAccPortTxDoneCallback) ( UINT32 callbackTag, IX_OSAL_MBUF *buffer );
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxDoneCallbackRegister( IxEthAccPortId portId, 
-					   IxEthAccPortTxDoneCallback txCallbackFn, 
-					   UINT32 callbackTag)
- *
- * @brief Register a callback function to allow 
- * the transmitted buffers to return to the user.
- * 
- * This function registers the transmit buffer done function callback for a particular port.
- *
- * The registered callback function is called once the previously submitted buffer is no longer required by this service.
- * It may be returned upon successful transmission of the frame or  shutdown of port prior to submission.
- * The calling of this registered function is not a guarantee of successful transmission of the buffer.
- *
- * If called several times the latest callback shall be registered for a particular port.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- * @pre
- *	The port must be initialized via @a ixEthAccPortInit
- *
- *
- * @param portId @ref IxEthAccPortId [in] - Register callback for a particular MAC device.
- * @param txCallbackFn @ref IxEthAccPortTxDoneCallback [in] - Function to be called to return transmit buffers to the user.
- * @param callbackTag UINT32 [in] -  This tag shall be provided to the callback function.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortTxDoneCallbackRegister(IxEthAccPortId portId,
-								   IxEthAccPortTxDoneCallback txCallbackFn,
-								   UINT32 callbackTag);
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @brief Function prototype for Ethernet Frame Rx callback. Registered via @a ixEthAccPortRxCallbackRegister 
- * 
- * It is the responsibility of the user function to free any MBUF's which it receives.
- *  
- * @li Reentrant    - yes , The user provided function should be reentrant.
- * @li ISR Callable - yes , The user provided function must be callable from an ISR.
- * @par
- *
- * This function dispatches frames to the user level
- * via the provided function. The invocation shall be made for each
- * frame dequeued from the Ethernet QM queue. The user is required to free any MBUF's 
- * supplied via this callback. In addition the registered callback must free up MBUF's
- * from the receive free queue when the port is disabled 
- * 
- * If called several times the latest callback shall be registered for a particular port.
- *
- * <b>Calling Context </b>: 
- * @par
- *   This callback is called in the context of the queue manager dispatch loop @a ixQmgrgrDispatcherLoopRun
- *   within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. 
- *   The decision is system specific.
- *
- *
- * @param callbackTag UINT32 [in] - This tag is that provided when the callback was registered for a particular MAC 
- * via @a ixEthAccPortRxCallbackRegister. It allows the same callback to be used for multiple MACs.
- * @param mbuf @ref IX_OSAL_MBUF [in] - Pointer to the Rx mbuf header. Mbufs may be chained if 
- *               the frame length is greater than the supplied mbuf length.
- * @param reserved [in] - deprecated parameter The information is passed 
- *      thru the IxEthAccNe header destination port ID field 
- *      (@sa IX_ETHACC_NE_DESTPORTID). For backward 
- *      compatibility,the value is equal to IX_ETH_DB_UNKNOWN_PORT (0xff). 
- * 
- * @return void
- *
- * @note
- * Buffers may not be filled up to the length supplied in 
- * @a ixEthAccPortRxFreeReplenish(). The firmware fills
- * them to the previous 64 bytes boundary. The user has to be aware 
- * that the length of the received mbufs may be smaller than the length
- * of the supplied mbufs. 
- * The mbuf header contains the following modified field
- * @li @a IX_OSAL_MBUF_PKT_LEN is set in the header of the first mbuf and indicates
- *  the total frame size
- * @li @a IX_OSAL_MBUF_MLEN is set each mbuf header and indicates the payload length
- * @li @a IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR contains a pointer to the next 
- *     mbuf, or NULL at the end of a chain.
- * @li @a IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is modified. Its value is reset to NULL
- * @li @a IX_OSAL_MBUF_FLAGS contains the bit 4 set for a broadcast packet and the bit 5
- *     set for a multicast packet. Other bits are unmodified.
- *
- * <hr>
- */
-typedef void (*IxEthAccPortRxCallback) (UINT32 callbackTag, IX_OSAL_MBUF *buffer, UINT32 reserved);
-
-/**
- * @ingroup IxEthAcc
- *
- * @brief Function prototype for Ethernet Frame Rx callback. Registered via @a ixEthAccPortMultiBufferRxCallbackRegister 
- * 
- * It is the responsibility of the user function to free any MBUF's which it receives.
- *  
- * @li Reentrant    - yes , The user provided function should be reentrant.
- * @li ISR Callable - yes , The user provided function must be callable from an ISR.
- * @par
- *
- * This function dispatches many frames to the user level
- * via the provided function. The invocation shall be made for multiple frames
- * dequeued from the Ethernet QM queue. The user is required to free any MBUF's 
- * supplied via this callback. In addition the registered callback must free up MBUF's
- * from the receive free queue when the port is disabled 
- * 
- * If called several times the latest callback shall be registered for a particular port.
- *
- * <b>Calling Context </b>: 
- * @par
- *   This callback is called in the context of the queue manager dispatch loop @a ixQmgrDispatcherLoopRun
- *   within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. 
- *   The decision is system specific.
- *
- *
- * @param callbackTag - This tag is that provided when the callback was registered for a particular MAC 
- * via @a ixEthAccPortMultiBufferRxCallbackRegister. It allows the same callback to be used for multiple MACs.
- * @param mbuf - Pointer to an array of Rx mbuf headers. Mbufs 
- *               may be chained if 
- *               the frame length is greater than the supplied mbuf length.
- *               The end of the array contains a zeroed entry (NULL pointer).
- *
- * @return void
- *
- * @note The mbufs passed to this callback have the same structure than the
- *  buffers passed to @a IxEthAccPortRxCallback interfac. 
- *
- * @note The usage of this callback is exclusive with the usage of
- *  @a ixEthAccPortRxCallbackRegister and @a IxEthAccPortRxCallback 
- *
- * @sa ixEthAccPortMultiBufferRxCallbackRegister
- * @sa IxEthAccPortMultiBufferRxCallback
- * @sa ixEthAccPortRxCallbackRegister
- * @sa IxEthAccPortRxCallback
- * <hr>
- */
-
-typedef void (*IxEthAccPortMultiBufferRxCallback) (UINT32 callbackTag, IX_OSAL_MBUF **buffer);
-
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortRxCallbackRegister( IxEthAccPortId portId, IxEthAccPortRxCallback rxCallbackFn, UINT32 callbackTag)
- *
- * @brief Register a callback function to allow 
- * the reception of frames.
- *
- * The registered callback function is called once a frame is received  by this service.
- *
- * If called several times the latest callback shall be registered for a particular port.
- *
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- *
- * @param portId @ref IxEthAccPortId [in] - Register callback for a particular MAC device.
- * @param rxCallbackFn @ref IxEthAccPortRxCallback [in] - Function to be called when Ethernet frames are availble.
- * @param callbackTag UINT32 [in] -  This tag shall be provided to the callback function.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortRxCallbackRegister(IxEthAccPortId portId,
-							   IxEthAccPortRxCallback rxCallbackFn,
-							   UINT32 callbackTag);
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMultiBufferRxCallbackRegister( IxEthAccPortId portId, IxEthAccPortMultiBufferRxCallback rxCallbackFn, UINT32 callbackTag)
- *
- * @brief Register a callback function to allow 
- * the reception of frames.
- * 
- * The registered callback function is called once a frame is 
- * received  by this service. If many frames are already received, 
- * the function is called once.
- *
- * If called several times the latest callback shall be registered for a particular port.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- *
- * @param portId - Register callback for a particular MAC device.
- * @param rxCallbackFn - @a IxEthAccMultiBufferRxCallbackFn - Function to be called when Ethernet frames are availble.
- * @param callbackTag -  This tag shall be provided to the callback function.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid.
- *
- * @sa ixEthAccPortMultiBufferRxCallbackRegister
- * @sa IxEthAccPortMultiBufferRxCallback
- * @sa ixEthAccPortRxCallbackRegister
- * @sa IxEthAccPortRxCallback
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortMultiBufferRxCallbackRegister(IxEthAccPortId portId,
-										  IxEthAccPortMultiBufferRxCallback rxCallbackFn,
-										  UINT32 callbackTag);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortRxFreeReplenish( IxEthAccPortId portId, IX_OSAL_MBUF *buffer)
- *
- * @brief This function provides buffers for the Ethernet receive path. 
- *
- * This component does not have a buffer management mechanisms built in. All Rx buffers must be supplied to it
- * via this interface. 
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- * @param portId @ref IxEthAccPortId [in] - Provide buffers only to specific Rx MAC. 
- * @param buffer @ref IX_OSAL_MBUF [in] - Provide an MBUF to the Ethernet receive mechanism. 
- *                 Buffers size smaller than IX_ETHACC_RX_MBUF_MIN_SIZE may result in poor
- *                 performances and excessive buffer chaining. Buffers
- *                 larger than this size may be suitable for jumbo frames.
- *                 Chained packets are not supported and the field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR must be NULL. 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : Buffer has was not able to queue the 
- *                     buffer in the receive service.
- * @li @a IX_ETH_ACC_FAIL : Buffer size is less than IX_ETHACC_RX_MBUF_MIN_SIZE
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * @note
- * If the buffer replenish operation fails it is the responsibility 
- * of the user to free the buffer.
- *
- * @note
- * Sufficient buffers must be supplied to the component to maintain
- * receive throughput and avoid rx buffer underflow conditions.
- * To meet this goal, It is expected that the user preload the 
- * component with a sufficent number of buffers prior to enabling the
- * NPE Ethernet receive path. The recommended minimum number of 
- * buffers is 8.
- *
- * @note
- * For maximum performances, the mbuf size should be greater 
- * than the maximum frame size (Ethernet header, payload and FCS) + 64. 
- * Supplying smaller mbufs to the service results in mbuf
- * chaining and degraded performances. The recommended size
- * is @a IX_ETHACC_RX_MBUF_MIN_SIZE, which is
- * enough to take care of 802.3 frames and "baby jumbo" frames without
- * chaining, and "jumbo" frame within chaining.
- *
- * @note
- * Buffers may not be filled up to their length. The firware fills
- * them up to the previous 64 bytes boundary. The user has to be aware 
- * that the length of the received mbufs may be smaller than the length
- * of the supplied mbufs.
- *
- * @warning This function checks the parameters if the NDEBUG 
- * flag is not defined. Turning on the argument checking (disabled by 
- * default) results in a lower EthAcc performance as this function
- * is part of the data path.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortRxFreeReplenish( IxEthAccPortId portId, IX_OSAL_MBUF *buffer);
-
-
-
-/***************************************************************
-
-  ####    ####   #    #   #####  #####    ####   #
- #    #  #    #  ##   #     #    #    #  #    #  #
- #       #    #  # #  #     #    #    #  #    #  #
- #       #    #  #  # #     #    #####   #    #  #
- #    #  #    #  #   ##     #    #   #   #    #  #
-  ####    ####   #    #     #    #    #   ####   ######
-
-
-         #####   #         ##    #    #  ######
-         #    #  #        #  #   ##   #  #
-         #    #  #       #    #  # #  #  #####
-         #####   #       ######  #  # #  #
-         #       #       #    #  #   ##  #
-         #       ######  #    #  #    #  ######
-
-***************************************************************/
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortEnable(IxEthAccPortId portId)
- *
- * @brief This enables an Ethernet port for both Tx and Rx. 
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre The port must first be initialized via @a ixEthAccPortInit and the MAC address 
- * must be set using @a ixEthAccUnicastMacAddressSet before enabling it
- * The rx and Tx Done callbacks registration via @a
- * ixEthAccPortTxDoneCallbackRegister amd @a  ixEthAccPortRxCallbackRegister
- * has to be done before enabling the traffic.
- * 
- * @param  portId @ref IxEthAccPortId [in] - Port id to act upon.
- * 
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is not initialized
- * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortDisable(IxEthAccPortId portId)
- *
- * @brief This disables an Ethernet port for both Tx and Rx. 
- *
- * Free MBufs are returned to the user via the registered callback when the port is disabled 
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre The port must be enabled with @a ixEthAccPortEnable, otherwise this
- * function has no effect
- *
- * @param  portId @ref IxEthAccPortId [in] - Port id to act upon.
- * 
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is not initialized
- * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled)
- *
- * @brief Get the enabled state of a port.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- * @pre The port must first be initialized via @a ixEthAccPortInit
- *
- * @param  portId @ref IxEthAccPortId [in] - Port id to act upon.
- * @param  enabled BOOL [out] - location to store the state of the port
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId)
- *
- * @brief Put the Ethernet MAC device in non-promiscuous mode.
- * 
- * In non-promiscuous mode the MAC filters all frames other than 
- * destination MAC address which matches the following criteria:
- * @li Unicast address provisioned via @a ixEthAccUnicastMacAddressSet
- * @li All broadcast frames.
- * @li Multicast addresses provisioned via @a ixEthAccMulticastAddressJoin
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- * 
- * @sa ixEthAccPortPromiscuousModeSet
- * 
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * 
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId);
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn  ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId)
- *
- * @brief Put the MAC device in promiscuous mode.
- * 
- * If the device is in promiscuous mode then all all received frames shall be forwared
- * to the NPE for processing.
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- * 
- * @sa ixEthAccPortPromiscuousModeClear
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * 
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortUnicastMacAddressSet(      IxEthAccPortId portId,
-                                                  IxEthAccMacAddr *macAddr)
- *
- * @brief Configure unicast MAC address for a particular port
- *
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address.
- *
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressSet(IxEthAccPortId portId,
-													   IxEthAccMacAddr *macAddr);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortUnicastMacAddressGet(	IxEthAccPortId portId, 
-					IxEthAccMacAddr *macAddr)
- *
- * @brief Get unicast MAC address for a particular MAC port 
- *
- * @pre
- * The MAC address must first be set via @a ixEthAccMacPromiscuousModeSet
- * If the MAC address has not been set, the function returns a 
- * IX_ETH_ACC_MAC_UNINITIALIZED status
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * @param *macAddr @ref IxEthAccMacAddr [out] - Ethernet MAC address.
- *
- * @return  IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized.
- * @li @a IX_ETH_ACC_FAIL : macAddr is invalid.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortUnicastMacAddressGet(IxEthAccPortId portId,
-								 IxEthAccMacAddr *macAddr);
-
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMulticastAddressJoin(      IxEthAccPortId portId,
-                                             IxEthAccMacAddr *macAddr)
- *
- * @brief Add a multicast address to the MAC address table.
- *
- *  @note
- *  Due to the operation of the Ethernet MAC multicast filtering mechanism, frames which do not 
- *  have a multicast destination address which were provisioned via this API may be forwarded 
- *  to the NPE's. This is a result of the hardware comparison  algorithm used in the destination mac address logic
- *  within the Ethernet MAC. 
- *
- *  See Also: IXP425 hardware development manual.
- * 
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address.
- *
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : Error writing to the MAC registers
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressJoin(IxEthAccPortId portId,
-								 IxEthAccMacAddr *macAddr);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMulticastAddressJoinAll(  IxEthAccPortId portId)
- *
- * @brief Filter all frames with multicast dest.
- *
- * This function clears the MAC address table, and then sets
- * the MAC to forward ALL multicast frames to the NPE.
- * Specifically, it forwards all frames whose destination address
- * has the LSB of the highest byte set  (01:00:00:00:00:00).  This
- * bit is commonly referred to as the "multicast bit".
- * Broadcast frames will still be forwarded. 
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- *
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressJoinAll(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMulticastAddressLeave( IxEthAccPortId portId,
-                                         IxEthAccMacAddr *macAddr)
- *
- * @brief Remove a multicast address from the MAC address table.
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_NO_SUCH_ADDR :  Failed if MAC address was not in the table.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressLeave(IxEthAccPortId portId,
-								  IxEthAccMacAddr *macAddr);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMulticastAddressLeaveAll( IxEthAccPortId portId)
- *
- * @brief This function unconfigures the multicast filtering settings
- *
- * This function first clears the MAC address table, and then sets
- * the MAC as configured by the promiscuous mode current settings.
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressLeaveAll(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortUnicastAddressShow(IxEthAccPortId portId)
- *
- * @brief Displays unicast MAC address
- *
- * Displays unicast address which is configured using 
- * @a ixEthAccUnicastMacAddressSet. This function also displays the MAC filter used
- * to filter multicast frames.
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- *
- * @return void
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortUnicastAddressShow(IxEthAccPortId portId);
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMulticastAddressShow( IxEthAccPortId portId)
- *
- * @brief Displays multicast MAC address
- *
- * Displays multicast address which have been configured using @a ixEthAccMulticastAddressJoin
- * 
- * @li Reentrant    - yes
- * @li ISR Callable - no
- * 
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- *
- * @return void
- *
- * <hr>
- */
-PUBLIC void ixEthAccPortMulticastAddressShow( IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortDuplexModeSet( IxEthAccPortId portId, IxEthAccDuplexMode mode )
- *
- * @brief  Set the duplex mode for the MAC.
- *
- * Configure the IXP400 MAC to either full or half duplex. 
- *
- * @note 
- * The configuration should match that provisioned on the PHY.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in]
- * @param mode @ref IxEthAccDuplexMode [in]
- *
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortDuplexModeSet(IxEthAccPortId portId,IxEthAccDuplexMode mode);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortDuplexModeGet( IxEthAccPortId portId, IxEthAccDuplexMode *mode )
- *
- * @brief  Get the duplex mode for the MAC.
- *
- * return the duplex configuration of the IXP400 MAC.
- *
- * @note
- * The configuration should match that provisioned on the PHY.
- * See @a ixEthAccDuplexModeSet
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in]
- * @param *mode @ref IxEthAccDuplexMode [out]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- *
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortDuplexModeGet(IxEthAccPortId portId,IxEthAccDuplexMode *mode );
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxFrameAppendPaddingEnable( IxEthAccPortId portId)
- *
- * @brief  Enable padding bytes to be appended to runt frames submitted to
- * this port
- * 
- * Enable up to 60 null-bytes padding bytes to be appended to runt frames 
- * submitted to this port. This is the default behavior of the access 
- * component.
- *
- * @warning Do not change this behaviour while the port is enabled.
- *
- * @note When Tx padding is enabled, Tx FCS generation is turned on
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @sa ixEthAccPortTxFrameAppendFCSDusable
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendPaddingEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxFrameAppendPaddingDisable( IxEthAccPortId portId)
- *
- * @brief  Disable padding bytes to be appended to runt frames submitted to
- * this port
- * 
- * Disable padding bytes to be appended to runt frames 
- * submitted to this port. This is not the default behavior of the access 
- * component.
- *
- * @warning Do not change this behaviour while the port is enabled.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendPaddingDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxFrameAppendFCSEnable( IxEthAccPortId portId)
- *
- * @brief  Enable the appending of Ethernet FCS to all frames submitted to this port
- * 
- * When enabled, the FCS is added to the submitted frames. This is the default 
- * behavior of the access component.
- * Do not change this behaviour while the port is enabled.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendFCSEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxFrameAppendFCSDisable( IxEthAccPortId portId)
- *
- * @brief  Disable the appending of Ethernet FCS to all frames submitted to this port.
- * 
- * When disabled, the Ethernet FCS is not added to the submitted frames. 
- * This is not the default
- * behavior of the access component.
- *
- * @note Since the FCS is not appended to the frame it is expected that the frame submitted to the 
- * component includes a valid FCS at the end of the data, although this will not be validated.
- *
- * The component shall forward the frame to the Ethernet MAC WITHOUT modification.
- *
- * Do not change this behaviour while the port is enabled.
- *
- * @note Tx FCS append is not disabled while Tx padding is enabled.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @sa ixEthAccPortTxFrameAppendPaddingEnable
- *
- * @param portId @ref IxEthAccPortId [in] 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendFCSDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortRxFrameAppendFCSEnable( IxEthAccPortId portId)
- *
- * @brief Forward frames with FCS included in the receive buffer.
- *
- * The FCS is not striped from the receive buffer. 
- * The received frame length includes the FCS size (4 bytes). ie. 
- * A minimum sized ethernet frame shall have a length of 64bytes.
- *
- * Frame FCS validity checks are still carried out on all received frames.
- *
- * This is not the default
- * behavior of the access component.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortRxFrameAppendFCSEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortRxFrameAppendFCSDisable( IxEthAccPortId portId)
- *
- * @brief  Do not forward the FCS portion of the received Ethernet frame to the user. 
- * The FCS is striped from the receive buffer. 
- * The received frame length does not include the FCS size (4 bytes).
- * Frame FCS validity checks are still carried out on all received frames.
- *
- * This is the default behavior of the component.
- * Do not change this behaviour while the port is enabled.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortRxFrameAppendFCSDisable(IxEthAccPortId portId);
-
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @enum IxEthAccSchedulerDiscipline
- *
- * @brief  Definition for the port scheduling discipline
- *
- * Select the port scheduling discipline on receive and transmit path
- * @li FIFO : No Priority : In this configuration all frames are processed
- *                       in the access component in the strict order in which 
- *                        the component received them.
- * @li FIFO : Priority : This shall be a very simple priority mechanism. 
- *                     Higher prior-ity frames shall be forwarded 
- *                     before lower priority frames. There shall be no 
- *                     fairness mechanisms applied across different 
- *                     priorities. Higher priority frames could starve 
- *                     lower priority frames indefinitely.
- */
-typedef  enum 
-{
-    FIFO_NO_PRIORITY, /**<frames submitted with no priority*/
-    FIFO_PRIORITY /**<higher prority frames submitted before lower priority*/
-}IxEthAccSchedulerDiscipline;
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IxEthAccTxSchedulerDiscipline
- *
- * @brief  Deprecated definition for the port transmit scheduling discipline
- */ 
-#define IxEthAccTxSchedulerDiscipline IxEthAccSchedulerDiscipline
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccTxSchedulingDisciplineSet( IxEthAccPortId portId, IxEthAccSchedulerDiscipline sched)
- *
- * @brief Set the port scheduling to one of @a IxEthAccSchedulerDiscipline
- *
- * The default behavior of the component is @a FIFO_NO_PRIORITY.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- *
- * @param portId @ref IxEthAccPortId [in] 
- * @param sched @ref IxEthAccSchedulerDiscipline [in] 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Set appropriate discipline.
- * @li @a IX_ETH_ACC_FAIL :  Invalid/unsupported discipline.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccTxSchedulingDisciplineSet(IxEthAccPortId portId, 
-								  IxEthAccSchedulerDiscipline sched);
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched)
- *
- * @brief Set the Rx scheduling to one of @a IxEthAccSchedulerDiscipline
- *
- * The default behavior of the component is @a FIFO_NO_PRIORITY.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @param sched : @a IxEthAccSchedulerDiscipline 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Set appropriate discipline.
- * @li @a IX_ETH_ACC_FAIL :  Invalid/unsupported discipline.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccNpeLoopbackEnable(IxEthAccPortId portId)
- *
- * @brief Enable NPE loopback
- *
- * When this loopback mode is enabled all the transmitted frames are
- * received on the same port, without payload.
- *
- * This function is recommended for power-up diagnostic checks and
- * should never be used under normal Ethernet traffic operations.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @param portId : ID of the port 
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : NPE loopback mode enabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortNpeLoopbackEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId)
- *
- * @brief Disable NPE loopback
- *
- * This function is used to disable the NPE loopback if previously
- * enabled using ixEthAccNpeLoopbackEnable.
- *
- * This function is recommended for power-up diagnostic checks and
- * should never be used under normal Ethernet traffic operations.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : NPE loopback successfully disabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortTxEnable(IxEthAccPortId portId)
- *
- * @brief Enable Tx on the port
- *
- * This function is the complement of ixEthAccPortTxDisable and should
- * be used only after Tx was disabled. A MAC core reset is required before
- * this function is called (see @a ixEthAccPortMacReset).
- *
- * This function is the recommended usage scenario for emergency security
- * shutdown and hardware failure recovery and should never be used for throttling 
- * traffic.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Tx successfully enabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortTxEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortTxDisable(IxEthAccPortId portId)
- *
- * @brief Disable Tx on the port
- *
- * This function can be used to disable Tx in the MAC core.
- * Tx can be re-enabled, although this is not guaranteed, by performing
- * a MAC core reset (@a ixEthAccPortMacReset) and calling ixEthAccPortTxEnable.
- * Note that using this function is not recommended, except for shutting
- * down Tx for emergency reasons. For proper port shutdown and re-enabling
- * see ixEthAccPortEnable and ixEthAccPortDisable.
- *
- * This function is the recommended usage scenario for emergency security
- * shutdown and hardware failure recovery and should never be used for throttling 
- * traffic.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @pre
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Tx successfully disabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortTxDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortRxEnable(IxEthAccPortId portId)
- *
- * @brief Enable Rx on the port
- *
- * This function is the complement of ixEthAccPortRxDisable and should
- * be used only after Rx was disabled.
- *
- * This function is the recommended usage scenario for emergency security
- * shutdown and hardware failure recovery and should never be used for throttling 
- * traffic.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @pre
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Rx successfully enabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortRxEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortRxDisable(IxEthAccPortId portId)
- *
- * @brief Disable Rx on the port
- *
- * This function can be used to disable Rx in the MAC core.
- * Rx can be re-enabled, although this is not guaranteed, by performing
- * a MAC core reset (@a ixEthAccPortMacReset) and calling ixEthAccPortRxEnable.
- * Note that using this function is not recommended, except for shutting
- * down Rx for emergency reasons. For proper port shutdown and re-enabling
- * see ixEthAccPortEnable and ixEthAccPortDisable.
- *
- * This function is the recommended usage scenario for emergency security
- * shutdown and hardware failure recovery and should never be used for throttling 
- * traffic.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Rx successfully disabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortRxDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortMacReset(IxEthAccPortId portId)
- *
- * @brief Reset MAC core on the port
- *
- * This function will perform a MAC core reset (NPE Ethernet coprocessor).
- * This function is inherently unsafe and the NPE recovery is not guaranteed
- * after this function is called. The proper manner of performing port disable
- * and enable (which will reset the MAC as well) is ixEthAccPortEnable/ixEthAccPortDisable.
- *
- * This function is the recommended usage scenario for hardware failure recovery
- * and should never be used for throttling traffic.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : MAC core reset
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortMacReset(IxEthAccPortId portId);
-
-/*********************************************************************************
-  ####    #####    ##     #####     #     ####    #####     #     ####    ####
- #          #     #  #      #       #    #          #       #    #    #  #
-  ####      #    #    #     #       #     ####      #       #    #        ####
-      #     #    ######     #       #         #     #       #    #            #
- #    #     #    #    #     #       #    #    #     #       #    #    #  #    #
-  ####      #    #    #     #       #     ####      #       #     ####    ####
-**********************************************************************************/
-
-
-/**
- *
- * @brief This struct defines the statistics returned by this component.
- *
- * The component returns MIB2 EthObj variables which are obtained from the 
- * hardware or maintained by this component. 
- *
- *
- */
-typedef struct   
-{
-    UINT32 dot3StatsAlignmentErrors;            /**< link error count (rx) */
-    UINT32 dot3StatsFCSErrors;                  /**< link error count (rx) */
-    UINT32 dot3StatsInternalMacReceiveErrors;   /**< link error count (rx) */
-    UINT32 RxOverrunDiscards;                   /**< NPE: discarded frames count (rx) */
-    UINT32 RxLearnedEntryDiscards;                /**< NPE: discarded frames count(rx)  */
-    UINT32 RxLargeFramesDiscards;                 /**< NPE: discarded frames count(rx)  */
-    UINT32 RxSTPBlockedDiscards;                  /**< NPE: discarded frames count(rx)  */
-    UINT32 RxVLANTypeFilterDiscards;              /**< NPE: discarded frames count (rx) */
-    UINT32 RxVLANIdFilterDiscards;                /**< NPE: discarded frames count (rx) */
-    UINT32 RxInvalidSourceDiscards;               /**< NPE: discarded frames count (rx) */
-    UINT32 RxBlackListDiscards;                   /**< NPE: discarded frames count (rx) */
-    UINT32 RxWhiteListDiscards;                   /**< NPE: discarded frames count (rx) */
-    UINT32 RxUnderflowEntryDiscards;              /**< NPE: discarded frames count (rx) */
-    UINT32 dot3StatsSingleCollisionFrames;      /**< link error count (tx) */
-    UINT32 dot3StatsMultipleCollisionFrames;    /**< link error count (tx) */
-    UINT32 dot3StatsDeferredTransmissions;      /**< link error count (tx) */
-    UINT32 dot3StatsLateCollisions;             /**< link error count (tx) */
-    UINT32 dot3StatsExcessiveCollsions;         /**< link error count (tx) */
-    UINT32 dot3StatsInternalMacTransmitErrors;  /**< link error count (tx) */
-    UINT32 dot3StatsCarrierSenseErrors;         /**< link error count (tx) */
-    UINT32 TxLargeFrameDiscards;                /**< NPE: discarded frames count (tx) */
-    UINT32 TxVLANIdFilterDiscards;              /**< NPE: discarded frames count (tx) */
-
-}IxEthEthObjStats;
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMibIIStatsGet(IxEthAccPortId portId ,IxEthEthObjStats *retStats )
- *
- * @brief  Returns the statistics maintained for a port.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- *
- * @param portId @ref IxEthAccPortId [in] 
- * @param retStats @ref IxEthEthObjStats [out]
- * @note Please note the user is responsible for cache coheriency of the retStat
- * buffer. The data is actually populated via the NPE's. As such cache safe
- * memory should be used in the retStats argument.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : Invalid arguments.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccMibIIStatsGet(IxEthAccPortId portId, IxEthEthObjStats *retStats );
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMibIIStatsGetClear(IxEthAccPortId portId, IxEthEthObjStats *retStats)
- * 
- * @brief  Returns and clears the statistics maintained for a port. 
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- * @pre
- *
- * @param portId @ref IxEthAccPortId [in] 
- * @param retStats @ref IxEthEthObjStats [out]
- * @note Please note the user is responsible for cache coheriency of the retStats
- * buffer. The data is actually populated via the NPE's. As such cache safe
- * memory should be used in the retStats argument.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : invalid arguments.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccMibIIStatsGetClear(IxEthAccPortId portId, IxEthEthObjStats *retStats);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMibIIStatsClear(IxEthAccPortId portId)
- *
- * @brief   Clears the statistics maintained for a port.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : Invalid arguments.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccMibIIStatsClear(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMacInit(IxEthAccPortId portId)
- * 
- * @brief Initializes the ethernet MAC settings 
- * 
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT	:  portId is invalid.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccMacInit(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccStatsShow(IxEthAccPortId portId)
- *
- *
- * @brief Displays a ports statistics on the standard io console using printf.
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @pre
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return void
- *
- * <hr>
- */
-PUBLIC void ixEthAccStatsShow(IxEthAccPortId portId);
-
-/*************************************************************************
-
- #    #     #       #            #    #  #####      #     ####
- ##  ##     #       #            ##  ##  #    #     #    #    #
- # ## #     #       #            # ## #  #    #     #    #    #
- #    #     #       #            #    #  #    #     #    #    #
- #    #     #       #            #    #  #    #     #    #    #
- #    #     #       #            #    #  #####      #     ####
-
-*************************************************************************/
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMiiReadRtn (UINT8 phyAddr, 
-                           UINT8 phyReg, 
-	                   UINT16 *value)
- *
- *
- * @brief Reads a 16 bit value from a PHY
- *
- * Reads a 16-bit word from a register of a MII-compliant PHY. Reading
- * is performed through the MII management interface.  This function returns
- * when the read operation has successfully completed, or when a timeout has elapsed.
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
- *   
- * @param phyAddr UINT8 [in] - the address of the Ethernet PHY (0-31)
- * @param phyReg UINT8 [in] -  the number of the MII register to read (0-31)
- * @param value UINT16 [in] -  the value read from the register
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : failed to read the register.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccMiiReadRtn (UINT8 phyAddr, UINT8 phyReg, UINT16 *value);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMiiWriteRtn (UINT8 phyAddr, 
-                            UINT8 phyReg, 
-	                    UINT16 value)
- *
- *
- * @brief Writes a 16 bit value to a PHY
- *
- * Writes a 16-bit word from a register of a MII-compliant PHY. Writing
- * is performed through the MII management interface.  This function returns
- * when the write operation has successfully completed, or when a timeout has elapsed.
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
- *   
- * @param phyAddr UINT8 [in] - the address of the Ethernet PHY (0-31)
- * @param phyReg UINT8 [in] -  the number of the MII register to write (0-31)
- * @param value UINT16 [out] -  the value to write to the register
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : failed to write register.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccMiiWriteRtn (UINT8 phyAddr, UINT8 phyReg, UINT16 value);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMiiAccessTimeoutSet(UINT32 timeout)
- *
- * @brief Overrides the default timeout value and retry count when reading or 
- * writing MII registers using ixEthAccMiiWriteRtn or ixEthAccMiiReadRtn
- *
- * The default behavior of the component is to use a IX_ETH_ACC_MII_10TH_SEC_IN_MILLIS ms
- * timeout (declared as 100 in IxEthAccMii_p.h) and a retry count of IX_ETH_ACC_MII_TIMEOUT_10TH_SECS
- * (declared as 5 in IxEthAccMii_p.h).
- *
- * The MII read and write functions will attempt to read the status of the register up
- * to the retry count times, delaying between each attempt with the timeout value.
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @pre
- *
- * @param timeout UINT32 [in] - new timeout value, in milliseconds
- * @param timeout UINT32 [in] - new retry count (a minimum value of 1 must be used)
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : invalid parameter(s)
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccMiiAccessTimeoutSet(UINT32 timeout, UINT32 retryCount);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMiiStatsShow (UINT32 phyAddr)
- *
- *
- * @brief Displays detailed information on a specified PHY
- *
- * Displays the current values of the first eigth MII registers for a PHY, 
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and 
- *      generating the MDIO clock.
- *   
- * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : invalid arguments.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccMiiStatsShow (UINT32 phyAddr);
-
-
-
-/******* BOARD SPECIFIC DEPRECATED API *********/
-
-/* The following functions are high level functions which rely
- * on the properties and interface of some Ethernet PHYs. The
- * implementation is hardware specific and has been moved to 
- * the hardware-specific component IxEthMii.
- */
-
- #include "IxEthMii.h"
-
-/**
- * @ingroup IxEthAcc
- *
- * @def  ixEthAccMiiPhyScan
- *
- * @brief : deprecated API entry point. This definition 
- * ensures backward compatibility
- *
- * See @ref ixEthMiiPhyScan
- *
- * @note this feature is board specific
- *
- */
-#define ixEthAccMiiPhyScan(phyPresent) ixEthMiiPhyScan(phyPresent,IXP425_ETH_ACC_MII_MAX_ADDR)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def ixEthAccMiiPhyConfig
- *
- * @brief : deprecated API entry point. This definition 
- * ensures backward compatibility
- *
- * See @ref ixEthMiiPhyConfig
- *
- * @note this feature is board specific
- */
-#define ixEthAccMiiPhyConfig(phyAddr,speed100,fullDuplex,autonegotiate) \
-           ixEthMiiPhyConfig(phyAddr,speed100,fullDuplex,autonegotiate)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def ixEthAccMiiPhyReset
- *
- * @brief : deprecated API entry point. This definition 
- * ensures backward compatibility
- *
- * See @ref ixEthMiiPhyReset
- *
- * @note this feature is board specific
- */
-#define ixEthAccMiiPhyReset(phyAddr) \
-           ixEthMiiPhyReset(phyAddr)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def ixEthAccMiiLinkStatus
- *
- * @brief : deprecated API entry point. This definition 
- * ensures backward compatibility
- *
- * See @ref ixEthMiiLinkStatus
- *
- * @note this feature is board specific
- */
-#define ixEthAccMiiLinkStatus(phyAddr,linkUp,speed100,fullDuplex,autoneg) \
-           ixEthMiiLinkStatus(phyAddr,linkUp,speed100,fullDuplex,autoneg)
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @def ixEthAccMiiShow  
- *
- * @brief : deprecated API entry point. This definition 
- * ensures backward compatibility
- *
- * See @ref ixEthMiiPhyShow
- *
- * @note this feature is board specific
- */
-#define ixEthAccMiiShow(phyAddr) \
-        ixEthMiiPhyShow(phyAddr)
-
-#endif /* ndef IxEthAcc_H */
-/**
- *@}
- */
diff --git a/drivers/net/npe/include/IxEthAccDataPlane_p.h b/drivers/net/npe/include/IxEthAccDataPlane_p.h
deleted file mode 100644
index dce43d9..0000000
--- a/drivers/net/npe/include/IxEthAccDataPlane_p.h
+++ /dev/null
@@ -1,221 +0,0 @@
-/**
- * @file IxEthAccDataPlane_p.h
- *
- * @author Intel Corporation
- * @date 12-Feb-2002
- *
- * @brief  Internal Header file for IXP425 Ethernet Access component.
- *
- * Design Notes:
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-
-#ifndef IxEthAccDataPlane_p_H
-#define IxEthAccDataPlane_p_H
-
-#include <IxOsal.h>
-#include <IxQMgr.h>
-
-/**
- * @addtogroup IxEthAccPri
- *@{
- */
-
-/* typedefs global to this file*/
-
-typedef struct
-{
-    IX_OSAL_MBUF *pHead;
-    IX_OSAL_MBUF *pTail;
-}IxEthAccDataPlaneQList;
-
-
-/**
- * @struct  IxEthAccDataPlaneStats
- * @brief   Statistics data structure associated with the data plane
- *
- */
-typedef struct
-{
-    UINT32 addToSwQ;
-    UINT32 removeFromSwQ;
-    UINT32 unchainedTxMBufs;
-    UINT32 chainedTxMBufs;
-    UINT32 unchainedTxDoneMBufs;
-    UINT32 chainedTxDoneMBufs;
-    UINT32 unchainedRxMBufs;
-    UINT32 chainedRxMBufs;
-    UINT32 unchainedRxFreeMBufs;
-    UINT32 chainedRxFreeMBufs;
-    UINT32 rxCallbackCounter;
-    UINT32 rxCallbackBurstRead;
-    UINT32 txDoneCallbackCounter;
-    UINT32 unexpectedError;
-} IxEthAccDataPlaneStats;
-
-/**
- * @fn ixEthAccMbufFromSwQ
- * @brief  used during disable steps to convert mbufs from 
- *  swq format, ready to be pushed into hw queues for NPE, 
- *  back into XScale format 
- */
-IX_OSAL_MBUF *ixEthAccMbufFromSwQ(IX_OSAL_MBUF *mbuf);
-
-/**
- * @fn ixEthAccDataPlaneShow
- * @brief  Show function (for data plane statistics
- */
-void ixEthAccDataPlaneShow(void);
-
-/*
- * lock dataplane when atomic operation is required
- */
-#define IX_ETH_ACC_DATA_PLANE_LOCK(arg) arg = ixOsalIrqLock();
-#define IX_ETH_ACC_DATA_PLANE_UNLOCK(arg) ixOsalIrqUnlock(arg);
-
-/*
- * Use MBUF fields
- */
-#define IX_ETHACC_NE_SHARED(mBufPtr) \
- ((IxEthAccNe *)&((mBufPtr)->ix_ne))
-
-#if 1
-
-#define IX_ETHACC_NE_NEXT(mBufPtr) (mBufPtr)->ix_ne.reserved[0]
-
-/* tm - wrong!! len and pkt_len are in the second word - #define IX_ETHACC_NE_LEN(mBufPtr) (mBufPtr)->ix_ne.reserved[3] */
-#define IX_ETHACC_NE_LEN(mBufPtr) (mBufPtr)->ix_ne.reserved[1]
-
-#define IX_ETHACC_NE_DATA(mBufPtr)(mBufPtr)->ix_ne.reserved[2]
-
-#else
-
-#define IX_ETHACC_NE_NEXT(mBufPtr) \
-  IX_ETHACC_NE_SHARED(mBufPtr)->ixReserved_next
-
-#define IX_ETHACC_NE_LEN(mBufPtr) \
-  IX_ETHACC_NE_SHARED(mBufPtr)->ixReserved_lengths
-
-#define IX_ETHACC_NE_DATA(mBufPtr) \
-  IX_ETHACC_NE_SHARED(mBufPtr)->ixReserved_data
-#endif
-
-/*
- * Use MBUF  next pointer field to chain data.
- */
-#define IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER(mbuf) (mbuf)->ix_ctrl.ix_chain
-
-
-
-#define IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(mbuf_list) ((mbuf_list.pHead) == NULL)
-    
-
-#define IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD(mbuf_list,mbuf_to_add) 		\
-  do {										\
-    int lockVal;								\
-    IX_ETH_ACC_DATA_PLANE_LOCK(lockVal);                                    	\
-    IX_ETH_ACC_STATS_INC(ixEthAccDataStats.addToSwQ);                           \
-    if ( (mbuf_list.pHead) != NULL ) 						\
-    {										\
-      (IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add))) = (mbuf_list.pHead);\
-      (mbuf_list.pHead) = (mbuf_to_add);					\
-    } 										\
-    else {									\
-      (mbuf_list.pTail) = (mbuf_list.pHead) = (mbuf_to_add);			\
-      IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add)) = NULL;		\
-    } 										\
-    IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal);					\
-  } while(0)
-
-
-#define IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_TAIL(mbuf_list,mbuf_to_add)   	\
-  do {										\
-    int lockVal;								\
-    IX_ETH_ACC_DATA_PLANE_LOCK(lockVal);                                    	\
-    IX_ETH_ACC_STATS_INC(ixEthAccDataStats.addToSwQ);                           \
-    if ( (mbuf_list.pHead) == NULL ) 						\
-    {										\
-      (mbuf_list.pHead) = mbuf_to_add;						\
-      IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add)) = NULL;		\
-    } 										\
-    else {									\
-      IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_list.pTail)) = (mbuf_to_add);	\
-      IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add)) = NULL;		\
-    } 										\
-    (mbuf_list.pTail) = mbuf_to_add;						\
-    IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal);					\
-  } while (0)
-
-
-#define IX_ETH_ACC_DATAPLANE_REMOVE_MBUF_FROM_Q_HEAD(mbuf_list,mbuf_to_rem)   	\
-  do {										\
-    int lockVal;								\
-    IX_ETH_ACC_DATA_PLANE_LOCK(lockVal);                                    	\
-    if ( (mbuf_list.pHead) != NULL ) 						\
-    {										\
-      IX_ETH_ACC_STATS_INC(ixEthAccDataStats.removeFromSwQ);                    \
-      (mbuf_to_rem) = (mbuf_list.pHead) ;					\
-      (mbuf_list.pHead) = (IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_rem)));\
-    } 										\
-    else {									\
-      (mbuf_to_rem) = NULL;							\
-    } 										\
-    IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal);					\
-  } while (0)
-
-
-/**
- * @brief message handler QManager entries for NPE id => port ID conversion (NPE_B => 0, NPE_C => 1)
- */
-#define IX_ETH_ACC_PORT_TO_NPE_ID(port) \
-   ixEthAccPortData[(port)].npeId
-
-#define IX_ETH_ACC_NPE_TO_PORT_ID(npe) ((npe == 0 ? 2 : (npe == 1 ? 0 : ( npe == 2 ? 1 : -1 ))))
-
-#define IX_ETH_ACC_PORT_TO_TX_Q_ID(port)  \
-   ixEthAccPortData[(port)].ixEthAccTxData.txQueue
-
-#define IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(port) \
-   ixEthAccPortData[(port)].ixEthAccRxData.rxFreeQueue
-
-#define IX_ETH_ACC_PORT_TO_TX_Q_SOURCE(port)    (port == IX_ETH_PORT_1 ? IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE : (port == IX_ETH_PORT_2 ? IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE : IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE))
-
-#define IX_ETH_ACC_PORT_TO_RX_FREE_Q_SOURCE(port) (port == IX_ETH_PORT_1 ? IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE : (port == IX_ETH_PORT_2 ? IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE : IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE ))
-
-/* Flush the mbufs chain and all data pointed to by the mbuf */
-
-#ifndef NDEBUG
-#define IX_ETH_ACC_STATS_INC(x) (x++)
-#else
-#define IX_ETH_ACC_STATS_INC(x)
-#endif
-
-#define IX_ETH_ACC_MAX_TX_FRAMES_TO_SUBMIT 128
-
-void ixEthRxFrameQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId);
-void ixEthRxMultiBufferQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId);
-void ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId);
-
-#endif /* IxEthAccDataPlane_p_H */
-
-
-/**
- *@}
- */
-
diff --git a/drivers/net/npe/include/IxEthAccMac_p.h b/drivers/net/npe/include/IxEthAccMac_p.h
deleted file mode 100644
index 4eafab2..0000000
--- a/drivers/net/npe/include/IxEthAccMac_p.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-
-#ifndef IxEthAccMac_p_H
-#define IxEthAccMac_p_H
-
-#include "IxOsal.h"
-
-#define IX_ETH_ACC_MAX_MULTICAST_ADDRESSES 256
-#define IX_ETH_ACC_NUM_PORTS 3
-#define IX_ETH_ACC_MAX_FRAME_SIZE_DEFAULT 1536
-#define IX_ETH_ACC_MAX_FRAME_SIZE_UPPER_RANGE (65536-64)
-#define IX_ETH_ACC_MAX_FRAME_SIZE_LOWER_RANGE 64
-
-/*
- * 
- * MAC register definitions
- *
- */
-#define IX_ETH_ACC_MAC_0_BASE IX_OSAL_IXP400_ETHA_PHYS_BASE
-#define IX_ETH_ACC_MAC_1_BASE IX_OSAL_IXP400_ETHB_PHYS_BASE
-#define IX_ETH_ACC_MAC_2_BASE IX_OSAL_IXP400_ETH_NPEA_PHYS_BASE
-
-#define IX_ETH_ACC_MAC_TX_CNTRL1       0x000
-#define IX_ETH_ACC_MAC_TX_CNTRL2       0x004
-#define IX_ETH_ACC_MAC_RX_CNTRL1       0x010
-#define IX_ETH_ACC_MAC_RX_CNTRL2       0x014
-#define IX_ETH_ACC_MAC_RANDOM_SEED     0x020
-#define IX_ETH_ACC_MAC_THRESH_P_EMPTY  0x030
-#define IX_ETH_ACC_MAC_THRESH_P_FULL   0x038
-#define IX_ETH_ACC_MAC_BUF_SIZE_TX     0x040
-#define IX_ETH_ACC_MAC_TX_DEFER        0x050
-#define IX_ETH_ACC_MAC_RX_DEFER        0x054
-#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1  0x060
-#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2  0x064
-#define IX_ETH_ACC_MAC_SLOT_TIME       0x070
-#define IX_ETH_ACC_MAC_MDIO_CMD_1      0x080
-#define IX_ETH_ACC_MAC_MDIO_CMD_2      0x084
-#define IX_ETH_ACC_MAC_MDIO_CMD_3      0x088
-#define IX_ETH_ACC_MAC_MDIO_CMD_4      0x08c
-#define IX_ETH_ACC_MAC_MDIO_STS_1      0x090
-#define IX_ETH_ACC_MAC_MDIO_STS_2      0x094
-#define IX_ETH_ACC_MAC_MDIO_STS_3      0x098
-#define IX_ETH_ACC_MAC_MDIO_STS_4      0x09c
-#define IX_ETH_ACC_MAC_ADDR_MASK_1     0x0A0
-#define IX_ETH_ACC_MAC_ADDR_MASK_2     0x0A4
-#define IX_ETH_ACC_MAC_ADDR_MASK_3     0x0A8
-#define IX_ETH_ACC_MAC_ADDR_MASK_4     0x0AC
-#define IX_ETH_ACC_MAC_ADDR_MASK_5     0x0B0
-#define IX_ETH_ACC_MAC_ADDR_MASK_6     0x0B4
-#define IX_ETH_ACC_MAC_ADDR_1          0x0C0
-#define IX_ETH_ACC_MAC_ADDR_2          0x0C4
-#define IX_ETH_ACC_MAC_ADDR_3          0x0C8
-#define IX_ETH_ACC_MAC_ADDR_4          0x0CC
-#define IX_ETH_ACC_MAC_ADDR_5          0x0D0
-#define IX_ETH_ACC_MAC_ADDR_6          0x0D4
-#define IX_ETH_ACC_MAC_INT_CLK_THRESH  0x0E0
-#define IX_ETH_ACC_MAC_UNI_ADDR_1      0x0F0
-#define IX_ETH_ACC_MAC_UNI_ADDR_2      0x0F4
-#define IX_ETH_ACC_MAC_UNI_ADDR_3      0x0F8
-#define IX_ETH_ACC_MAC_UNI_ADDR_4      0x0FC
-#define IX_ETH_ACC_MAC_UNI_ADDR_5      0x100
-#define IX_ETH_ACC_MAC_UNI_ADDR_6      0x104
-#define IX_ETH_ACC_MAC_CORE_CNTRL      0x1FC
-
-
-/*
- *
- *Bit definitions
- *
- */
-
-/* TX Control Register 1*/
-
-#define IX_ETH_ACC_TX_CNTRL1_TX_EN         BIT(0)
-#define IX_ETH_ACC_TX_CNTRL1_DUPLEX        BIT(1)
-#define IX_ETH_ACC_TX_CNTRL1_RETRY         BIT(2)
-#define IX_ETH_ACC_TX_CNTRL1_PAD_EN        BIT(3)
-#define IX_ETH_ACC_TX_CNTRL1_FCS_EN        BIT(4)
-#define IX_ETH_ACC_TX_CNTRL1_2DEFER        BIT(5)
-#define IX_ETH_ACC_TX_CNTRL1_RMII          BIT(6)
-
-/* TX Control Register 2 */
-#define IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK  0xf
-
-/* RX Control Register 1 */
-#define IX_ETH_ACC_RX_CNTRL1_RX_EN         BIT(0)
-#define IX_ETH_ACC_RX_CNTRL1_PADSTRIP_EN   BIT(1)
-#define IX_ETH_ACC_RX_CNTRL1_CRC_EN        BIT(2)
-#define IX_ETH_ACC_RX_CNTRL1_PAUSE_EN      BIT(3)
-#define IX_ETH_ACC_RX_CNTRL1_LOOP_EN       BIT(4)
-#define IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN  BIT(5)
-#define IX_ETH_ACC_RX_CNTRL1_RX_RUNT_EN    BIT(6)
-#define IX_ETH_ACC_RX_CNTRL1_BCAST_DIS     BIT(7)
-
-/* RX Control Register 2 */
-#define IX_ETH_ACC_RX_CNTRL2_DEFER_EN      BIT(0)
-
-
-
-/* Core Control Register */
-#define IX_ETH_ACC_CORE_RESET              BIT(0)
-#define IX_ETH_ACC_CORE_RX_FIFO_FLUSH      BIT(1)
-#define IX_ETH_ACC_CORE_TX_FIFO_FLUSH      BIT(2)
-#define IX_ETH_ACC_CORE_SEND_JAM           BIT(3)
-#define IX_ETH_ACC_CORE_MDC_EN             BIT(4)
-
-/* 1st bit of 1st MAC octet */
-#define IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT ( 1) 
-
-
-/*
- *
- * Default values
- *
- */
-
-
-#define IX_ETH_ACC_TX_CNTRL1_DEFAULT  (IX_ETH_ACC_TX_CNTRL1_TX_EN | \
- IX_ETH_ACC_TX_CNTRL1_RETRY  | \
- IX_ETH_ACC_TX_CNTRL1_FCS_EN | \
- IX_ETH_ACC_TX_CNTRL1_2DEFER | \
- IX_ETH_ACC_TX_CNTRL1_PAD_EN)
-
-#define IX_ETH_ACC_TX_MAX_RETRIES_DEFAULT      0x0f 
-
-#define IX_ETH_ACC_RX_CNTRL1_DEFAULT    (IX_ETH_ACC_RX_CNTRL1_CRC_EN    \
-					 | IX_ETH_ACC_RX_CNTRL1_RX_EN)
-
-#define IX_ETH_ACC_RX_CNTRL2_DEFAULT           0x0
-
-/* Thresholds determined by NPE firmware FS */
-#define IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT  0x12
-#define IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT   0x30
-
-/* Number of bytes that must be in the tx fifo before
-   transmission commences*/
-#define IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT     0x8
-
-/* One-part deferral values */
-#define IX_ETH_ACC_MAC_TX_DEFER_DEFAULT        0x15
-#define IX_ETH_ACC_MAC_RX_DEFER_DEFAULT        0x16
-
-/* Two-part deferral values... */
-#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT  0x08
-#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT  0x07
-
-/* This value applies to MII */
-#define IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT       0x80
-
-/* This value applies to RMII */
-#define IX_ETH_ACC_MAC_SLOT_TIME_RMII_DEFAULT  0xFF
-
-#define IX_ETH_ACC_MAC_ADDR_MASK_DEFAULT       0xFF
-
-#define IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT  0x1
-/*The following is a value chosen at random*/
-#define IX_ETH_ACC_RANDOM_SEED_DEFAULT         0x8
-
-/*By default we must configure the MAC to generate the 
-  MDC clock*/
-#define IX_ETH_ACC_CORE_DEFAULT                (IX_ETH_ACC_CORE_MDC_EN)
-
-#define IXP425_ETH_ACC_MAX_PHY 2
-#define IXP425_ETH_ACC_MAX_AN_ENTRIES 20
-#define IX_ETH_ACC_MAC_RESET_DELAY    1
-
-#define IX_ETH_ACC_MAC_ALL_BITS_SET   0xFF
-
-#define IX_ETH_ACC_MAC_MSGID_SHL      24
-
-#define IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS 20
-#define IX_ETH_ACC_PORT_DISABLE_DELAY_COUNT 200  /* 4 seconds timeout */
-#define IX_ETH_ACC_PORT_DISABLE_RETRY_COUNT 3
-#define IX_ETH_ACC_MIB_STATS_DELAY_MSECS 2000 /* 2 seconds delay for ethernet stats */ 
-
-/*Register access macros*/
-#if  (CPU == SIMSPARCSOLARIS)
-extern void registerWriteStub (UINT32 base, UINT32 offset, UINT32 val);
-extern UINT32 registerReadStub (UINT32 base, UINT32 offset);
-
-#define REG_WRITE(b,o,v) registerWriteStub(b, o, v)
-#define REG_READ(b,o,v)  do { v = registerReadStub(b, o); } while (0)
-#else
-#define REG_WRITE(b,o,v) IX_OSAL_WRITE_LONG((volatile UINT32 *)(b + o), v)
-#define REG_READ(b,o,v)  (v = IX_OSAL_READ_LONG((volatile UINT32 *)(b + o)))
-
-#endif
-
-void ixEthAccMacUnload(void);
-IxEthAccStatus ixEthAccMacMemInit(void);
-
-/* MAC core loopback */
-IxEthAccStatus ixEthAccPortLoopbackEnable(IxEthAccPortId portId);
-IxEthAccStatus ixEthAccPortLoopbackDisable(IxEthAccPortId portId);
-
-/* MAC core traffic control */
-IxEthAccStatus ixEthAccPortTxEnablePriv(IxEthAccPortId portId);
-IxEthAccStatus ixEthAccPortTxDisablePriv(IxEthAccPortId portId);
-IxEthAccStatus ixEthAccPortRxEnablePriv(IxEthAccPortId portId);
-IxEthAccStatus ixEthAccPortRxDisablePriv(IxEthAccPortId portId);
-IxEthAccStatus ixEthAccPortMacResetPriv(IxEthAccPortId portId);
-
-/* NPE software loopback */
-IxEthAccStatus ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId);
-IxEthAccStatus ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId);
-
-#endif /*IxEthAccMac_p_H*/
-
diff --git a/drivers/net/npe/include/IxEthAccMii_p.h b/drivers/net/npe/include/IxEthAccMii_p.h
deleted file mode 100644
index aff30f0..0000000
--- a/drivers/net/npe/include/IxEthAccMii_p.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/**
- * @file IxEthAccMii_p.h
- *
- * @author Intel Corporation
- * @date 
- *
- * @brief  MII Header file
- *
- * Design Notes:
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxEthAccMii_p_H
-#define IxEthAccMii_p_H
-
-/* MII definitions - these have been verified against the LXT971 and LXT972 PHYs*/
-
-#define IXP425_ETH_ACC_MII_MAX_REG      32      /* max register per phy */
-
-#define IX_ETH_ACC_MII_REG_SHL    16
-#define IX_ETH_ACC_MII_ADDR_SHL   21
-
-/* Definitions for MII access routines*/
- 
-#define IX_ETH_ACC_MII_GO                  BIT(31)
-#define IX_ETH_ACC_MII_WRITE               BIT(26)
-#define IX_ETH_ACC_MII_TIMEOUT_10TH_SECS        5    
-#define IX_ETH_ACC_MII_10TH_SEC_IN_MILLIS     100
-#define IX_ETH_ACC_MII_READ_FAIL           BIT(31)
- 
-#define IX_ETH_ACC_MII_PHY_DEF_DELAY   300  /* max delay before link up, etc. */
-#define IX_ETH_ACC_MII_PHY_NO_DELAY    0x0  /* do not delay */
-#define IX_ETH_ACC_MII_PHY_NULL        0xff /* PHY is not present */
-#define IX_ETH_ACC_MII_PHY_DEF_ADDR    0x0  /* default PHY's logical address */
-
-#ifndef IX_ETH_ACC_MII_MONITOR_DELAY
-#   define IX_ETH_ACC_MII_MONITOR_DELAY   0x5    /* in seconds */
-#endif
-
-/* Register definition */  
-
-#define IX_ETH_ACC_MII_CTRL_REG	    0x0	/* Control Register */
-#define IX_ETH_ACC_MII_STAT_REG	    0x1	/* Status Register */
-#define IX_ETH_ACC_MII_PHY_ID1_REG  0x2	/* PHY identifier 1 Register */
-#define IX_ETH_ACC_MII_PHY_ID2_REG  0x3	/* PHY identifier 2 Register */
-#define IX_ETH_ACC_MII_AN_ADS_REG   0x4	/* Auto-Negotiation	  */
-					/* Advertisement Register */
-#define IX_ETH_ACC_MII_AN_PRTN_REG  0x5	/* Auto-Negotiation	    */
-					/* partner ability Register */
-#define IX_ETH_ACC_MII_AN_EXP_REG   0x6	/* Auto-Negotiation   */
-					/* Expansion Register */
-#define IX_ETH_ACC_MII_AN_NEXT_REG  0x7	/* Auto-Negotiation	       */
-					/* next-page transmit Register */
-
-IxEthAccStatus ixEthAccMdioShow (void);
-IxEthAccStatus ixEthAccMiiInit(void);
-void ixEthAccMiiUnload(void);
-
-#endif  /*IxEthAccMii_p_H*/
diff --git a/drivers/net/npe/include/IxEthAccQueueAssign_p.h b/drivers/net/npe/include/IxEthAccQueueAssign_p.h
deleted file mode 100644
index 65661a0..0000000
--- a/drivers/net/npe/include/IxEthAccQueueAssign_p.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/**
- * @file IxEthAccQueueAssign_p.h
- *
- * @author Intel Corporation
- * @date 06-Mar-2002
- *
- * @brief   Mapping from QMgr Q's to internal assignment
- *
- * Design Notes:
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @addtogroup IxEthAccPri
- *@{
- */
-
-/*
- * Os/System dependancies.
- */
-#include "IxOsal.h"
-
-/*
- * Intermodule dependancies
- */
-#include "IxQMgr.h"
-#include "IxQueueAssignments.h"
-
-/* Check range of Q's assigned to this component. */
-#if IX_ETH_ACC_RX_FRAME_ETH_Q >= (IX_QMGR_MIN_QUEUPP_QID ) |    	\
- IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q  >=  (IX_QMGR_MIN_QUEUPP_QID) | 	\
- IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q  >=  (IX_QMGR_MIN_QUEUPP_QID) | 	\
- IX_ETH_ACC_TX_FRAME_ENET0_Q >=   (IX_QMGR_MIN_QUEUPP_QID) |  		\
- IX_ETH_ACC_TX_FRAME_ENET1_Q >=   (IX_QMGR_MIN_QUEUPP_QID) | 		\
- IX_ETH_ACC_TX_FRAME_DONE_ETH_Q  >=  (IX_QMGR_MIN_QUEUPP_QID)  
-#error "Not all Ethernet Access Queues are betweem 1-31, requires full functionalty Q's unless otherwise validated "
-#endif
-
-/**
-*
-* @typedef  IxEthAccQregInfo
-*
-* @brief 
-*
-*/
-typedef struct 
-{
-   IxQMgrQId qId;
-   char *qName;
-   IxQMgrCallback qCallback;
-   IxQMgrCallbackId callbackTag;
-   IxQMgrQSizeInWords qSize;
-   IxQMgrQEntrySizeInWords qWords; 
-   BOOL           qNotificationEnableAtStartup;
-   IxQMgrSourceId qConditionSource; 
-   IxQMgrWMLevel  AlmostEmptyThreshold;
-   IxQMgrWMLevel  AlmostFullThreshold;
-
-} IxEthAccQregInfo;
-
-/*
- * Prototypes for all QM callbacks.
- */
-
-/* 
- * Rx Callbacks 
- */
-IX_ETH_ACC_PUBLIC
-void  ixEthRxFrameQMCallback(IxQMgrQId, IxQMgrCallbackId);
-
-IX_ETH_ACC_PUBLIC
-void  ixEthRxMultiBufferQMCallback(IxQMgrQId, IxQMgrCallbackId);
-
-IX_ETH_ACC_PUBLIC
-void  ixEthRxFreeQMCallback(IxQMgrQId, IxQMgrCallbackId);
-
-/* 
- * Tx Callback.
- */
-IX_ETH_ACC_PUBLIC
-void  ixEthTxFrameQMCallback(IxQMgrQId, IxQMgrCallbackId);
-
-IX_ETH_ACC_PUBLIC
-void  ixEthTxFrameDoneQMCallback(IxQMgrQId, IxQMgrCallbackId );
-
-
-#define IX_ETH_ACC_QM_QUEUE_DISPATCH_PRIORITY (IX_QMGR_Q_PRIORITY_0) /* Highest priority */
-
-/*
- * Queue watermarks
- */
-#define IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE 		(IX_QMGR_Q_SOURCE_ID_NOT_E   )
-#define IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE 		(IX_QMGR_Q_SOURCE_ID_E   )   
-#define IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE 		(IX_QMGR_Q_SOURCE_ID_E   )
-#define IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE 		(IX_QMGR_Q_SOURCE_ID_E   )
-#define IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE 		(IX_QMGR_Q_SOURCE_ID_E   ) 
-#define IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE 		(IX_QMGR_Q_SOURCE_ID_E   )
-#define IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE 		(IX_QMGR_Q_SOURCE_ID_E   )
-#define IX_ETH_ACC_TX_FRAME_DONE_ETH_Q_SOURCE 		(IX_QMGR_Q_SOURCE_ID_NOT_E   )
diff --git a/drivers/net/npe/include/IxEthAcc_p.h b/drivers/net/npe/include/IxEthAcc_p.h
deleted file mode 100644
index 1348f4e..0000000
--- a/drivers/net/npe/include/IxEthAcc_p.h
+++ /dev/null
@@ -1,301 +0,0 @@
-/**
- * @file IxEthAcc_p.h
- *
- * @author Intel Corporation
- * @date 12-Feb-2002
- *
- * @brief  Internal Header file for IXP425 Ethernet Access component.
- *
- * Design Notes:
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @addtogroup IxEthAccPri
- *@{
- */
-
-#ifndef IxEthAcc_p_H
-#define IxEthAcc_p_H
-
-/*
- * Os/System dependancies.
- */
-#include "IxOsal.h"
-
-/*
- * Intermodule dependancies
- */
-#include "IxNpeDl.h"
-#include "IxQMgr.h"
-
-#include "IxEthNpe.h"
-
-/* 
- * Intra module dependancies
- */
-
-#include "IxEthAccDataPlane_p.h"
-#include "IxEthAccMac_p.h"
-
-
-#define INLINE __inline__
-
-#ifdef NDEBUG
-
-#define IX_ETH_ACC_PRIVATE static
-
-#else
-
-#define IX_ETH_ACC_PRIVATE
-
-#endif /* ndef NDEBUG */
-
-#define IX_ETH_ACC_PUBLIC
-
-
-#define IX_ETH_ACC_IS_PORT_VALID(port) ((port) <  IX_ETH_ACC_NUMBER_OF_PORTS  ? true : false )
-
-
-
-#ifndef NDEBUG
-#define IX_ETH_ACC_FATAL_LOG(a,b,c,d,e,f,g)   { ixOsalLog ( IX_OSAL_LOG_LVL_FATAL,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);}
-#define IX_ETH_ACC_WARNING_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_WARNING,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);}
-#define IX_ETH_ACC_DEBUG_LOG(a,b,c,d,e,f,g)   { ixOsalLog ( IX_OSAL_LOG_LVL_FATAL,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);}
-#else
-#define IX_ETH_ACC_FATAL_LOG(a,b,c,d,e,f,g)   { ixOsalLog ( IX_OSAL_LOG_LVL_FATAL,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);}
-#define IX_ETH_ACC_WARNING_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_WARNING,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);}
-#define IX_ETH_ACC_DEBUG_LOG(a,b,c,d,e,f,g)   {}
-#endif
-
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccInitDataPlane(void);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccQMgrQueuesConfig(void);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccSingleEthNpeCheck(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC void ixEthAccQMgrRxQEntryGet(UINT32 *numRxQueueEntries);
-
-/* prototypes for the private control plane functions (used by the control interface wrapper) */
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortEnablePriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortDisablePriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortEnabledQueryPriv(IxEthAccPortId portId, BOOL *enabled);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeClearPriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeSetPriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressSetPriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressGetPriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressJoinPriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressJoinAllPriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressLeavePriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressLeaveAllPriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortUnicastAddressShowPriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC void ixEthAccPortMulticastAddressShowPriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortDuplexModeSetPriv(IxEthAccPortId portId, IxEthAccDuplexMode mode);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortDuplexModeGetPriv(IxEthAccPortId portId, IxEthAccDuplexMode *mode);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendPaddingEnablePriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendPaddingDisablePriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendFCSEnablePriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendFCSDisablePriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortRxFrameAppendFCSEnablePriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortRxFrameAppendFCSDisablePriv(IxEthAccPortId portId);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccTxSchedulingDisciplineSetPriv(IxEthAccPortId portId, IxEthAccSchedulerDiscipline sched);
-IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccRxSchedulingDisciplineSetPriv(IxEthAccSchedulerDiscipline sched);
-
-/**
- * @struct  ixEthAccRxDataStats
- * @brief   Stats data structures for data path. - Not obtained from h/w
- *
- */
-typedef struct
-{ 
-    UINT32 rxFrameClientCallback;
-    UINT32 rxFreeRepOK;
-    UINT32 rxFreeRepDelayed;
-    UINT32 rxFreeRepFromSwQOK;
-    UINT32 rxFreeRepFromSwQDelayed;
-    UINT32 rxFreeLateNotificationEnabled;
-    UINT32 rxFreeLowCallback;
-    UINT32 rxFreeOverflow;
-    UINT32 rxFreeLock;
-    UINT32 rxDuringDisable;
-    UINT32 rxSwQDuringDisable;
-    UINT32 rxUnlearnedMacAddress;
-    UINT32 rxPriority[IX_ETH_ACC_TX_PRIORITY_7 + 1];
-    UINT32 rxUnexpectedError;
-    UINT32 rxFiltered;
-} IxEthAccRxDataStats;
-
-/**
- * @struct  IxEthAccTxDataStats
- * @brief   Stats data structures for data path. - Not obtained from h/w
- *
- */
-typedef struct
-{   
-    UINT32 txQOK;
-    UINT32 txQDelayed;
-    UINT32 txFromSwQOK;
-    UINT32 txFromSwQDelayed;
-    UINT32 txLowThreshCallback;
-    UINT32 txDoneClientCallback;
-    UINT32 txDoneClientCallbackDisable;
-    UINT32 txOverflow;
-    UINT32 txLock;
-    UINT32 txPriority[IX_ETH_ACC_TX_PRIORITY_7 + 1];
-    UINT32 txLateNotificationEnabled;
-    UINT32 txDoneDuringDisable;
-    UINT32 txDoneSwQDuringDisable;
-    UINT32 txUnexpectedError;
-} IxEthAccTxDataStats;
-
-/* port Disable state machine : list of states */
-typedef enum
-{
-    /* general port states */
-    DISABLED = 0,
-    ACTIVE,
-
-    /* particular Tx/Rx states */
-    REPLENISH,
-    RECEIVE,
-    TRANSMIT,
-    TRANSMIT_DONE
-} IxEthAccPortDisableState;
-
-typedef struct
-{
-    BOOL fullDuplex;
-    BOOL rxFCSAppend;
-    BOOL txFCSAppend;
-    BOOL txPADAppend;
-    BOOL enabled;
-    BOOL promiscuous;
-    BOOL joinAll;
-    IxOsalMutex ackMIBStatsLock;
-    IxOsalMutex ackMIBStatsResetLock;
-    IxOsalMutex MIBStatsGetAccessLock;
-    IxOsalMutex MIBStatsGetResetAccessLock;
-    IxOsalMutex npeLoopbackMessageLock;
-    IxEthAccMacAddr mcastAddrsTable[IX_ETH_ACC_MAX_MULTICAST_ADDRESSES];
-    UINT32 mcastAddrIndex;
-    IX_OSAL_MBUF *portDisableTxMbufPtr;
-    IX_OSAL_MBUF *portDisableRxMbufPtr;
-
-    volatile IxEthAccPortDisableState portDisableState;
-    volatile IxEthAccPortDisableState rxState;
-    volatile IxEthAccPortDisableState txState;
-
-    BOOL initDone;
-    BOOL macInitialised;
-} IxEthAccMacState;
-
-/**
- * @struct  IxEthAccRxInfo
- * @brief   System-wide data structures associated with the data plane.
- *
- */
-typedef struct
-{
-  IxQMgrQId higherPriorityQueue[IX_QMGR_MAX_NUM_QUEUES]; /**< higher priority queue list */
-  IxEthAccSchedulerDiscipline schDiscipline; /**< Receive Xscale QoS type */
-} IxEthAccInfo; 
-
-/**
- * @struct  IxEthAccRxDataInfo
- * @brief   Per Port data structures associated with the receive data plane.
- *
- */
-typedef struct
-{
-  IxQMgrQId rxFreeQueue; /**< rxFree Queue for this port */
-  IxEthAccPortRxCallback rxCallbackFn;
-  UINT32  rxCallbackTag;
-  IxEthAccDataPlaneQList freeBufferList;
-  IxEthAccPortMultiBufferRxCallback rxMultiBufferCallbackFn;
-  UINT32  rxMultiBufferCallbackTag;
-  BOOL rxMultiBufferCallbackInUse;
-  IxEthAccRxDataStats stats; /**< Receive s/w stats */
-} IxEthAccRxDataInfo; 
-
-/**
- * @struct  IxEthAccTxDataInfo
- * @brief   Per Port data structures associated with the transmit data plane.
- *
- */
-typedef struct
-{
-  IxEthAccPortTxDoneCallback  txBufferDoneCallbackFn;
-  UINT32  txCallbackTag;
-  IxEthAccDataPlaneQList	txQ[IX_ETH_ACC_NUM_TX_PRIORITIES]; /**< Transmit Q */
-  IxEthAccSchedulerDiscipline schDiscipline; /**< Transmit Xscale QoS */
-  IxQMgrQId txQueue; /**< txQueue for this port */
-  IxEthAccTxDataStats stats; /**< Transmit s/w stats */
-} IxEthAccTxDataInfo; 
-
-
-/**
- * @struct  IxEthAccPortDataInfo
- * @brief   Per Port data structures associated with the port data plane.
- *
- */
-typedef struct
-{
-    BOOL               portInitialized;
-    UINT32 npeId; /**< NpeId for this port */
-    IxEthAccTxDataInfo ixEthAccTxData; /**< Transmit data control structures */
-    IxEthAccRxDataInfo ixEthAccRxData; /**< Receive data control structures */
-} IxEthAccPortDataInfo; 
-
-extern IxEthAccPortDataInfo  ixEthAccPortData[];
-#define IX_ETH_IS_PORT_INITIALIZED(port) (ixEthAccPortData[port].portInitialized)
-
-extern BOOL ixEthAccServiceInit;
-#define IX_ETH_ACC_IS_SERVICE_INITIALIZED() (ixEthAccServiceInit == true )
-
-/* 
- * Maximum number of frames to consume from the Rx Frame Q.
- */
-
-#define IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK (128)
-
-/*
- * Max number of times to load the Rx Free Q from callback.  
- */
-#define IX_ETH_ACC_MAX_RX_FREE_BUFFERS_LOAD (256)  /* Set greater than depth of h/w Q + drain time at line rate */
-
-/*
- *  Max number of times to read from the Tx Done Q in one sitting.
- */
-
-#define IX_ETH_ACC_MAX_TX_FRAME_DONE_CONSUME_PER_CALLBACK (256)
-
-/*
- *  Max number of times to take buffers from S/w queues and write them to the H/w Tx
- *  queues on receipt of a Tx low threshold callback 
- */
-
-#define IX_ETH_ACC_MAX_TX_FRAME_TX_CONSUME_PER_CALLBACK (16)
-
-
-#define IX_ETH_ACC_FLUSH_CACHE(addr,size)  IX_OSAL_CACHE_FLUSH((addr),(size))
-#define IX_ETH_ACC_INVALIDATE_CACHE(addr,size)  IX_OSAL_CACHE_INVALIDATE((addr),(size))
-
-
-#define IX_ETH_ACC_MEMSET(start,value,size) memset(start,value,size)
-
-#endif /* ndef IxEthAcc_p_H */
-
-
-
diff --git a/drivers/net/npe/include/IxEthDB.h b/drivers/net/npe/include/IxEthDB.h
deleted file mode 100644
index 9c4a6a4..0000000
--- a/drivers/net/npe/include/IxEthDB.h
+++ /dev/null
@@ -1,2349 +0,0 @@
-/** @file IxEthDB.h
- *
- * @brief this file contains the public API of @ref IxEthDB component
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- *
- */
- 
-#ifndef IxEthDB_H
-#define IxEthDB_H
-
-#include <IxOsBuffMgt.h>
-#include <IxTypes.h>
-
-/**
- * @defgroup IxEthDB IXP400 Ethernet Database (IxEthDB) API
- *
- * @brief ethDB is a library that does provides a MAC address database learning/filtering capability
- *
- *@{
- */
-
-#define INLINE __inline__
-
-#define IX_ETH_DB_PRIVATE PRIVATE /* imported from IxTypes.h */
-
-#define IX_ETH_DB_PUBLIC PUBLIC
-
-/**
- * @brief port ID => message handler NPE id conversion (0 => NPE_B, 1 => NPE_C)
- */
-#define IX_ETH_DB_PORT_ID_TO_NPE(id) (id == 0 ? 1 : (id == 1 ? 2 : (id == 2 ? 0 : -1)))
-
-/**
- * @def IX_ETH_DB_NPE_TO_PORT_ID(npe)
- * @brief message handler NPE id => port ID conversion (NPE_B => 0, NPE_C => 1)
- */
-#define IX_ETH_DB_NPE_TO_PORT_ID(npe) (npe == 0 ? 2 : (npe == 1 ? 0 : (npe == 2 ? 1 : -1)))
-
-/* temporary define - won't work for Azusa */
-#define IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(id) (IX_ETH_DB_PORT_ID_TO_NPE(id) << 4)
-#define IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(id) (IX_ETH_DB_NPE_TO_PORT_ID(id >> 4))
-
-/**
- * @def IX_IEEE803_MAC_ADDRESS_SIZE
- * @brief The size of the MAC address
- */
-#define IX_IEEE803_MAC_ADDRESS_SIZE (6)
-
-/**
- * @def IX_IEEE802_1Q_QOS_PRIORITY_COUNT
- * @brief Number of QoS priorities defined by IEEE802.1Q
- */
-#define IX_IEEE802_1Q_QOS_PRIORITY_COUNT (8)
-
-/**
- * @enum IxEthDBStatus
- * @brief Ethernet Database API return values
- */
-typedef enum /* IxEthDBStatus */
-{
-  IX_ETH_DB_SUCCESS = IX_SUCCESS,   /**< Success */
-  IX_ETH_DB_FAIL = IX_FAIL,         /**< Failure */
-  IX_ETH_DB_INVALID_PORT,           /**< Invalid port */
-  IX_ETH_DB_PORT_UNINITIALIZED,     /**< Port not initialized */
-  IX_ETH_DB_MAC_UNINITIALIZED,      /**< MAC not initialized */
-  IX_ETH_DB_INVALID_ARG,            /**< Invalid argument */
-  IX_ETH_DB_NO_SUCH_ADDR,           /**< Address not found for search or delete operations */
-  IX_ETH_DB_NOMEM,                  /**< Learning database memory full */
-  IX_ETH_DB_BUSY,                   /**< Learning database cannot complete operation, access temporarily blocked */
-  IX_ETH_DB_END,                    /**< Database browser passed the end of the record set */
-  IX_ETH_DB_INVALID_VLAN,           /**< Invalid VLAN ID (valid range is 0..4094, 0 signifies no VLAN membership, used for priority tagged frames) */
-  IX_ETH_DB_INVALID_PRIORITY,       /**< Invalid QoS priority/traffic class (valid range for QoS priority is 0..7, valid range for traffic class depends on run-time configuration) */
-  IX_ETH_DB_NO_PERMISSION,          /**< No permission for attempted operation */
-  IX_ETH_DB_FEATURE_UNAVAILABLE,    /**< Feature not available (or not enabled) */
-  IX_ETH_DB_INVALID_KEY,            /**< Invalid search key */
-  IX_ETH_DB_INVALID_RECORD_TYPE     /**< Invalid record type */
-} IxEthDBStatus;
-    
-/** @brief VLAN ID type, valid range is 0..4094, 0 signifying no VLAN membership */
-typedef UINT32 IxEthDBVlanId;
-
-/** @brief 802.1Q VLAN tag, contains 3 bits user priority, 1 bit CFI, 12 bits VLAN ID */
-typedef UINT32 IxEthDBVlanTag;
-
-/** @brief QoS priority/traffic class type, valid range is 0..7, 0 being the lowest */
-typedef UINT32 IxEthDBPriority;
-
-/** @brief Priority mapping table; 0..7 QoS priorities used to index, table contains traffic classes */
-typedef UINT8 IxEthDBPriorityTable[8];
-
-/** @brief A 4096 bit array used to map the complete VLAN ID range */
-typedef UINT8 IxEthDBVlanSet[512];
-
-#define IX_ETH_DB_802_1Q_VLAN_MASK (0xFFF)
-#define IX_ETH_DB_802_1Q_QOS_MASK  (0x7)
-
-#define IX_ETH_DB_802_1Q_MAX_VLAN_ID (0xFFE)
-
-/**
- * @def IX_ETH_DB_SET_VLAN_ID
- * @brief returns the given 802.1Q tag with the VLAN ID field substituted with the given VLAN ID
- *
- * This macro is used to change the VLAN ID in a 802.1Q tag.
- *
- * Example: 
- * 
- *  tag = IX_ETH_DB_SET_VLAN_ID(tag, 32)
- *
- * inserts the VLAN ID "32" in the given tag.
- */
-#define IX_ETH_DB_SET_VLAN_ID(vlanTag, vlanID) (((vlanTag) & 0xF000) | ((vlanID) & IX_ETH_DB_802_1Q_VLAN_MASK))
-
-/**
-* @def IX_ETH_DB_GET_VLAN_ID
-* @brief returns the VLAN ID from the given 802.1Q tag
-*/
-#define IX_ETH_DB_GET_VLAN_ID(vlanTag) ((vlanTag) & IX_ETH_DB_802_1Q_VLAN_MASK)
-
-#define IX_ETH_DB_GET_QOS_PRIORITY(vlanTag) (((vlanTag) >> 13) & IX_ETH_DB_802_1Q_QOS_MASK)
-
-#define IX_ETH_DB_SET_QOS_PRIORITY(vlanTag, priority) (((vlanTag) & 0x1FFF) | (((priority) & IX_ETH_DB_802_1Q_QOS_MASK) << 13))
-
-#define IX_ETH_DB_CHECK_VLAN_TAG(vlanTag) { if(((vlanTag & 0xFFFF0000) != 0) || (IX_ETH_DB_GET_VLAN_ID(vlanTag) > 4094)) return IX_ETH_DB_INVALID_VLAN; }
-
-#define IX_ETH_DB_CHECK_VLAN_ID(vlanId) { if (vlanId > IX_ETH_DB_802_1Q_MAX_VLAN_ID) return IX_ETH_DB_INVALID_VLAN; }
-
-#define IX_IEEE802_1Q_VLAN_TPID (0x8100)
-    
-typedef enum
-{
-  IX_ETH_DB_UNTAGGED_FRAMES        = 0x1, /**< Accepts untagged frames */
-  IX_ETH_DB_VLAN_TAGGED_FRAMES     = 0x2, /**< Accepts tagged frames */
-  IX_ETH_DB_PRIORITY_TAGGED_FRAMES = 0x4, /**< Accepts tagged frames with VLAN ID set to 0 (no VLAN membership) */
-  IX_ETH_DB_ACCEPT_ALL_FRAMES      = 
-      IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES /**< Accepts all the frames */
-} IxEthDBFrameFilter;
-
-typedef enum
-{
-  IX_ETH_DB_PASS_THROUGH = 0x1, /**< Leave frame as-is */
-  IX_ETH_DB_ADD_TAG      = 0x2, /**< Add default port VLAN tag */
-  IX_ETH_DB_REMOVE_TAG   = 0x3  /**< Remove VLAN tag from frame */
-} IxEthDBTaggingAction;
-
-typedef enum
-{
-  IX_ETH_DB_FIREWALL_WHITE_LIST = 0x1,  /**< Firewall operates in white-list mode (MAC address based admission) */
-  IX_ETH_DB_FIREWALL_BLACK_LIST = 0x2   /**< Firewall operates in black-list mode (MAC address based blocking) */
-} IxEthDBFirewallMode;
-  
-typedef enum
-{
-  IX_ETH_DB_FILTERING_RECORD        = 0x01, /**< <table><caption> Filtering record </caption> 
-                                             *      <tr><td> MAC address <td> static/dynamic type <td> age 
-                                             *   </table> 
-                                             */
-  IX_ETH_DB_FILTERING_VLAN_RECORD   = 0x02, /**< <table><caption> VLAN-enabled filtering record </caption>
-                                             *      <tr><td> MAC address <td> static/dynamic type <td> age <td> 802.1Q tag 
-                                             *   </table> 
-                                             */
-  IX_ETH_DB_WIFI_RECORD             = 0x04, /**< <table><caption> WiFi header conversion record </caption>
-                                             *      <tr><td> MAC address <td> optional gateway MAC address <td> 
-                                             *   </table>
-                                             */
-  IX_ETH_DB_FIREWALL_RECORD         = 0x08, /**< <table><caption> Firewall record </caption>
-                                             *      <tr><td> MAC address 
-                                             *   </table>
-                                             */
-  IX_ETH_DB_GATEWAY_RECORD          = 0x10, /**< <i>For internal use only</i> */
-  IX_ETH_DB_MAX_RECORD_TYPE_INDEX   = 0x10, /**< <i>For internal use only</i> */
-  IX_ETH_DB_NO_RECORD_TYPE          = 0,    /**< None of the registered record types */
-  IX_ETH_DB_ALL_FILTERING_RECORDS   = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD, /**< All the filtering records */
-  IX_ETH_DB_ALL_RECORD_TYPES        = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD |
-      IX_ETH_DB_WIFI_RECORD | IX_ETH_DB_FIREWALL_RECORD /**< All the record types registered within EthDB */    
-} IxEthDBRecordType;
-  
-typedef enum
-{
-  IX_ETH_DB_LEARNING                = 0x01, /**< Learning feature; enables EthDB to learn MAC address (filtering) records, including 802.1Q enabled records */
-  IX_ETH_DB_FILTERING               = 0x02, /**< Filtering feature; enables EthDB to communicate with the NPEs for downloading filtering information in the NPEs; depends on the learning feature */
-  IX_ETH_DB_VLAN_QOS                = 0x04, /**< VLAN/QoS feature; enables EthDB to configure NPEs to operate in VLAN/QoS aware modes */
-  IX_ETH_DB_FIREWALL                = 0x08, /**< Firewall feature; enables EthDB to configure NPEs to operate in firewall mode, using white/black address lists */
-  IX_ETH_DB_SPANNING_TREE_PROTOCOL  = 0x10, /**< Spanning tree protocol feature; enables EthDB to configure the NPEs as STP nodes */
-  IX_ETH_DB_WIFI_HEADER_CONVERSION  = 0x20  /**< WiFi 802.3 to 802.11 header conversion feature; enables EthDB to handle WiFi conversion data */
-} IxEthDBFeature;
-  
-typedef UINT32 IxEthDBProperty;  /**< Property ID type */
-
-typedef enum
-{
-  IX_ETH_DB_INTEGER_PROPERTY  = 0x1, /**< 4 byte unsigned integer type */
-  IX_ETH_DB_STRING_PROPERTY   = 0x2, /**< NULL-terminated string type of maximum 255 characters (including the terminator) */
-  IX_ETH_DB_MAC_ADDR_PROPERTY = 0x3, /**< 6 byte MAC address type */
-  IX_ETH_DB_BOOL_PROPERTY     = 0x4  /**< 4 byte boolean type; can contain only true and false values */
-} IxEthDBPropertyType;
-
-/* list of supported properties for the IX_ETH_DB_VLAN_QOS feature */
-#define IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY   (0x01)     /**< Property identifying number the supported number of traffic classes */
-#define IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY (0x10)  /**< Rx queue assigned to traffic class 0 */
-#define IX_ETH_DB_QOS_TRAFFIC_CLASS_1_RX_QUEUE_PROPERTY (0x11)  /**< Rx queue assigned to traffic class 1 */
-#define IX_ETH_DB_QOS_TRAFFIC_CLASS_2_RX_QUEUE_PROPERTY (0x12)  /**< Rx queue assigned to traffic class 2 */
-#define IX_ETH_DB_QOS_TRAFFIC_CLASS_3_RX_QUEUE_PROPERTY (0x13)  /**< Rx queue assigned to traffic class 3 */
-#define IX_ETH_DB_QOS_TRAFFIC_CLASS_4_RX_QUEUE_PROPERTY (0x14)  /**< Rx queue assigned to traffic class 4 */
-#define IX_ETH_DB_QOS_TRAFFIC_CLASS_5_RX_QUEUE_PROPERTY (0x15)  /**< Rx queue assigned to traffic class 5 */
-#define IX_ETH_DB_QOS_TRAFFIC_CLASS_6_RX_QUEUE_PROPERTY (0x16)  /**< Rx queue assigned to traffic class 6 */
-#define IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY (0x17)  /**< Rx queue assigned to traffic class 7 */
-
-/* private property used by EthAcc to indicate queue configuration complete */
-#define IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE (0x18)
-      
-/**
- *
- * @brief The IEEE 802.3 Ethernet MAC address structure.
- * 
- * The data should be packed with bytes xx:xx:xx:xx:xx:xx 
- *
- * @note The data must be packed in network byte order.
- */
-typedef struct  
-{
-   UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE];
-} IxEthDBMacAddr;
-
-/**
- * @ingroup IxEthDB
- *
- * @brief Definition of an IXP400 port.
- */
-typedef UINT32 IxEthDBPortId;
-
-/**
- * @ingroup IxEthDB
- *
- * @brief Port dependency map definition
- */
-typedef UINT8 IxEthDBPortMap[32];
-    
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBInit(void)
- *
- * @brief Initializes the Ethernet learning/filtering database
- *
- * @note calling this function multiple times does not constitute an error;
- * redundant calls will be ignored, returning IX_ETH_DB_SUCCESS
- *
- * @retval IX_ETH_DB_SUCCESS initialization was successful
- * @retval IX_ETH_DB_FAIL initialization failed (OS error)
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBInit(void);
- 
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBUnload(void)
- *
- * @brief Stops and prepares the EthDB component for unloading.
- *
- * @retval IX_ETH_DB_SUCCESS de-initialization was successful
- * @retval IX_ETH_DB_BUSY de-initialization failed, ports must be disabled first
- * @retval IX_ETH_DB_FAIL de-initialization failed (OS error)
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBUnload(void);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn void ixEthDBPortInit(IxEthDBPortId portID)
- *
- * @brief Initializes a port
- *
- * This function is called automatically by the Ethernet Access
- * ixEthAccPortInit() routine for Ethernet NPE ports and should be manually
- * called for any user-defined port (any port that is not one of
- * the two Ethernet NPEs). 
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to be initialized
- *
- * @see IxEthDBPortDefs.h for port definitions
- *
- * @note calling this function multiple times does not constitute an error;
- * redundant calls will be ignored
- */
-IX_ETH_DB_PUBLIC 
-void ixEthDBPortInit(IxEthDBPortId portID);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID)
- *
- * @brief Enables a port
- *
- * This function is called automatically from the Ethernet Access component
- * ixEthAccPortEnable() routine for Ethernet NPE ports and should be manually
- * called for any user-defined port (any port that is not one of
- * the Ethernet NPEs). 
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to enable processing on
- *
- * @retval IX_ETH_DB_SUCCESS if enabling is successful
- * @retval IX_ETH_DB_FAIL if the enabling was not successful due to
- * a message handler error
- * @retval IX_ETH_DB_MAC_UNINITIALIZED the MAC address of this port was
- * not initialized (only for Ethernet NPEs)
- * @retval IX_ETH_DB_INVALID_PORT if portID is invalid
- *
- * @pre ixEthDBPortAddressSet needs to be called prior to enabling the port events
- * for Ethernet NPEs
- *
- * @see ixEthDBPortAddressSet
- *
- * @see IxEthDBPortDefs.h for port definitions
- *
- * @note calling this function multiple times does not constitute an error;
- * redundant calls will be ignored
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID)
- *
- * @brief Disables processing on a port
- *
- * This function is called automatically from the Ethernet Access component
- * ixEthAccPortDisable() routine for Ethernet NPE ports and should be manually
- * called for any user-defined port (any port that is not one of
- * the Ethernet NPEs).
- *
- * @note Calling ixEthAccPortDisable() will disable the respective Ethernet NPE.
- * After Ethernet NPEs are disabled they are stopped therefore
- * when re-enabled they need to be reset, downloaded with microcode and started.
- * For learning to restart working the user needs to call again 
- * ixEthAccPortUnicastMacAddressSet or ixEthDBUnicastAddressSet
- * with the respective port MAC address.
- * Residual MAC addresses learnt before the port was disabled are deleted as soon
- * as the port is disabled. This only applies to dynamic (learnt) entries, static
- * entries do not dissapear when the port is disabled.
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to disable processing on
- *
- * @retval IX_ETH_DB_SUCCESS if disabling is successful
- * @retval IX_ETH_DB_FAIL if the disabling was not successful due to
- * a message handler error
- * @retval IX_ETH_DB_INVALID_PORT if portID is invalid
- *
- * @note calling this function multiple times after the first time completed successfully
- * does not constitute an error; redundant calls will be ignored and return IX_ETH_DB_SUCCESS
-*/
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
- *
- * @brief Sets the port MAC address
- *
- * This function is to be called from the Ethernet Access component top-level
- * ixEthDBUnicastAddressSet(). Event processing cannot be enabled for a port
- * until its MAC address has been set.
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port whose MAC address is set
- * @param macAddr @ref IxEthDBMacAddr [in] - port MAC address
- *
- * @retval IX_ETH_DB_SUCCESS MAC address was set successfully
- * @retval IX_ETH_DB_FAIL MAC address was not set due to a message handler failure
- * @retval IX_ETH_DB_INVALID_PORT if the port is not an Ethernet NPE
- *
- * @see IxEthDBPortDefs.h for port definitions
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize)
- *
- * @brief Set the maximum frame size supported on the given port ID
- *
- * This functions set the maximum frame size supported on a specific port ID 
- * 
- * - Reentrant    - yes
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to configure
- * @param maximumFrameSize UINT32 [in] - maximum frame size to configure
- *
- * @retval IX_ETH_DB_SUCCESS the port is configured
- * @retval IX_ETH_DB_PORT_UNINITIALIZED the port has not been initialized
- * @retval IX_ETH_DB_INVALID_PORT portID is invalid
- * @retval IX_ETH_DB_INVALID_ARG size parameter is out of range
- * @retval IX_ETH_DB_NO_PERMISSION selected port is not an Ethernet NPE
- * @retval IX_FAIL unknown OS or NPE communication error
- *
- * @note
- * This maximum frame size is used to filter the frames based on their
- * destination addresses and the capabilities of the destination port.
- * The mximum value that can be set for a NPE port is 16320.
- * (IX_ETHNPE_ACC_FRAME_LENGTH_MAX)
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
- *
- * @brief Populate the Ethernet learning/filtering database with a static MAC address
- *
- * Populates the Ethernet learning/filtering database with a static MAC address. The entry will not be subject to aging.
- * If there is an entry (static or dynamic) with the corresponding MAC address on any port this entry will take precedence.
- * Any other entry with the same MAC address will be removed.
- *
- * - Reentrant    - yes
- * - ISR Callable - yes
- * 
- * @param portID @ref IxEthDBPortId [in] - port ID to add the static address to
- * @param macAddr @ref IxEthDBMacAddr [in] - static MAC address to add
- * 
- * @retval IX_ETH_DB_SUCCESS the add was successful
- * @retval IX_ETH_DB_FAIL failed to populate the database entry
- * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later
- * @retval IX_ETH_DB_INVALID_PORT portID is invalid
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
- *
- * @brief Populate the Ethernet learning/filtering database with a dynamic MAC address
- *
- * Populates the Ethernet learning/filtering database with a dynamic MAC address. This entry will be subject to normal 
- * aging function, if aging is enabled on its port.
- * If there is an entry (static or dynamic) with the same MAC address on any port this entry will take precedence.
- * Any other entry with the same MAC address will be removed.
- *
- * - Reentrant    - yes
- * - ISR Callable - yes
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to add the dynamic address to
- * @param macAddr @ref IxEthDBMacAddr [in] - static MAC address to add
- *
- * @retval IX_ETH_DB_SUCCESS the add was successful
- * @retval IX_ETH_DB_FAIL failed to populate the database entry
- * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later
- * @retval IX_ETH_DB_INVALID_PORT portID is invalid
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr)
- *
- * @brief Removes a MAC address entry from the Ethernet learning/filtering database
- *
- * @param macAddr IxEthDBMacAddr [in] - MAC address to remove
- *
- * - Reentrant    - yes
- * - ISR Callable - no
- *
- * @retval IX_ETH_DB_SUCCESS the removal was successful
- * @retval IX_ETH_DB_NO_SUCH_ADDR failed to remove the address (not in the database)
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
- * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
- *
- * @brief Search the Ethernet learning/filtering database for the given MAC address and port ID
- *
- * This functions searches the database for a specific port ID and MAC address. Both the port ID
- * and the MAC address have to match in order for the record to be reported as found.
- *
- * - Reentrant    - yes
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to search for
- * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to search for
- *
- * @retval IX_ETH_DB_SUCCESS the record exists in the database
- * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument
- * @retval IX_ETH_DB_NO_SUCH_ADDR the record was not found in the database
- * @retval IX_ETH_DB_INVALID_PORT portID is invalid
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr)
- *
- * @brief Search the Ethernet learning/filtering database for a MAC address and return the port ID
- *
- * Searches the database for a MAC address. The function returns the portID for the 
- * MAC address record, if found. If no match is found the function returns IX_ETH_DB_NO_SUCH_ADDR. 
- * The portID is only valid if the function finds a match.
- *
- * - Reentrant    - yes
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - port ID the address belongs to (populated only on a successful search)
- * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to search for
- *
- * @retval IX_ETH_DB_SUCCESS the record exists in the database
- * @retval IX_ETH_DB_NO_SUCH_ADDR the record was not found in the database
- * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or portID pointer argument(s)
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr)
- *
- * @brief Search the filtering database for a MAC address, return the port ID and reset the record age
- *
- * Searches the database for a MAC address. The function returns the portID for the 
- * MAC address record and resets the entry age to 0, if found. 
- * If no match is found the function returns IX_ETH_DB_NO_SUCH_ADDR. 
- * The portID is only valid if the function finds a match.
- *
- * - Reentrant      - yes
- * - ISR Callable   - no
- *
- * @retval IX_ETH_DB_SUCCESS the MAC address was found
- * @retval IX_ETH_DB_NO_SUCH_ADDR the MAC address was not found
- * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or portID pointer argument(s)
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @def IX_ETH_DB_MAINTENANCE_TIME
- *
- * @brief The @ref ixEthDBDatabaseMaintenance must be called by the user at a frequency of 
- * IX_ETH_DB_MAINTENANCE_TIME
- *
- */
-#define IX_ETH_DB_MAINTENANCE_TIME (1 * 60) /* 1 Minute */
-
-/**
- * @ingroup IxEthDB
- *
- * @def IX_ETH_DB_LEARNING_ENTRY_AGE_TIME
- *
- * @brief The define specifies the filtering database age entry time. Static entries older than
- * IX_ETH_DB_LEARNING_ENTRY_AGE_TIME +/- IX_ETH_DB_MAINTENANCE_TIME shall be removed.
- *
- */
-#define IX_ETH_DB_LEARNING_ENTRY_AGE_TIME (15 * 60 ) /* 15 Mins */
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID)
- *
- * @brief Disable the aging function for a specific port
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to disable aging on
- *
- * - Reentrant    - yes
- * - ISR Callable - no
- *
- * @retval IX_ETH_DB_SUCCESS aging disabled successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is invalid
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID)
- *
- * @brief Enable the aging function for a specific port
- * 
- * Enables the aging of dynamic MAC address entries stored in the learning/filtering database
- * 
- * @note The aging function relies on the @ref ixEthDBDatabaseMaintenance being called with a period of 
- * @ref IX_ETH_DB_MAINTENANCE_TIME seconds.
- *
- * - Reentrant    - yes
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to enable aging on
- *
- * @retval IX_ETH_DB_SUCCESS aging enabled successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is invalid
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn void ixEthDBDatabaseMaintenance(void)
- *
- * @brief Performs a maintenance operation on the Ethernet learning/filtering database
- * 
- * In order to perform a database maintenance this function must be called every
- * @ref IX_ETH_DB_MAINTENANCE_TIME seconds. It should be called regardless of whether learning is
- * enabled or not.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- * 
- * @note this function call will be ignored if the learning feature is disabled
- */
-IX_ETH_DB_PUBLIC 
-void ixEthDBDatabaseMaintenance(void);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId  portID)
- *
- * @brief This function displays the Mac Ethernet MAC address filtering tables.
- *
- * It displays the MAC address, port ID, entry type (dynamic/static),and age for 
- * the given port ID.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to display the MAC address entries
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is invalid
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized
- * @retval IX_ETH_DB_FAIL record browser failed due to an internal busy or lock condition
- *
- * @note this function is deprecated and kept for compatibility reasons; use @ref ixEthDBFilteringDatabaseShowRecords instead
- * 
- * @see ixEthDBFilteringDatabaseShowRecords
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID);
-
-/** 
- * @ingroup IxEthDB
- *
- * @fn void ixEthDBFilteringDatabaseShowAll(void)
- *
- * @brief Displays the MAC address recorded in the filtering database for all registered
- * ports (see IxEthDBPortDefs.h), grouped by port ID.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @retval void
- *
- * @note this function is deprecated and kept for compatibility reasons; use @ref ixEthDBFilteringDatabaseShowRecords instead
- * 
- * @see ixEthDBFilteringDatabaseShowRecords
- */
-IX_ETH_DB_PUBLIC 
-void ixEthDBFilteringDatabaseShowAll(void);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter)
- *
- * @brief This function displays per port database records, given a record type filter
- *
- * The supported record type filters are:
- * 
- * - IX_ETH_DB_FILTERING_RECORD - displays the non-VLAN filtering records (MAC address, age, static/dynamic)
- * - IX_ETH_DB_FILTERING_VLAN_RECORD - displays the VLAN filtering records (MAC address, age, static/dynamic, VLAN ID, CFI, QoS class)
- * - IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD - displays the previous two types of records
- * - IX_ETH_DB_WIFI_RECORD - displays the WiFi header conversion records (MAC address, optional gateway MAC address) and WiFi header conversion parameters (BBSID, Duration/ID)
- * - IX_ETH_DB_FIREWALL_RECORD - displays the firewall MAC address table and firewall operating mode (white list/black list)
- * - IX_ETH_DB_ALL_RECORD_TYPES - displays all the record types
- * - IX_ETH_DB_NO_RECORD_TYPE - displays only the port status (no records are displayed)
- * 
- * Additionally, the status of each port will be displayed, containg the following information: type, capabilities, enabled status, 
- * aging enabled status, group membership and maximum frame size.
- *
- * The port ID can either be an actual port or IX_ETH_DB_ALL_PORTS, in which case the requested information
- * will be displayed for all the ports (grouped by port)
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID ID of the port to display information on (use IX_ETH_DB_ALL_PORTS for all the ports)
- * @param recordFilter record type filter
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is invalid
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap)
- *
- * @brief Sets the dependency port map for a port
- *
- * @param portID ID of the port to set the dependency map to
- * @param dependencyPortMap new dependency map (as bitmap, each bit set indicates a port being included)
- *
- * This function is used to share filtering information between ports.
- * By adding a port into another port's dependency map the target port
- * filtering data will import the filtering data from the port it depends on.
- * Any changes to filtering data for a port - such as adding, updating or removing records -
- * will trigger updates in the filtering information for all the ports depending on
- * on the updated port.
- *
- * For example, if ports 2 and 3 are set in the port 0 dependency map the filtering
- * information for port 0 will also include the filtering information from ports 2 and 3.
- * Adding a record to port 2 will also trigger an update not only on port 2 but also on
- * port 0.
- *
- * The dependency map is a 256 bit array where each bit corresponds to a port corresponding to the
- * bit offset (bit 0 - port 0, bit 1 - port 1 etc). Setting a bit to 1 indicates that the corresponding
- * port is the port map. For example, a dependency port map of 0x14 consists in the ports with IDs 2 and 4.
- * Note that the last bit (offset 255) is reserved and should never be set (it will be automatically
- * cleared by the function).
- *
- * By default, each port has a dependency port map consisting only of itself, i.e. 
- *
- * @verbatim
-    IxEthDBPortMap portMap;
-    
-    // clear all ports from port map
-    memset(portMap, 0, sizeof (portMap)); 
-    
-    // include portID in port map 
-    portMap[portID / 8] = 1 << (portID % 8);
-   @endverbatim
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @note Setting dependency maps is useful for NPE ports, which benefit from automatic updates
- * of filtering information. Setting dependency maps for user-defined ports is not an error
- * but will have no actual effect.
- * 
- * @note Including a port in its own dependency map is not compulsory, however note that
- * in this case updating the port will not trigger an update on the port itself, which 
- * might not be the intended behavior
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>dependencyPortMap</i> pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Filtering is not available or not enabled for the port
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap)
- *
- * @brief Retrieves the dependency port map for a port
- *
- * @param portID ID of the port to set the dependency map to
- * @param dependencyPortMap location where the port dependency map is to be copied
- *
- * This function will copy the port dependency map to a user specified location.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>dependencyPortMap</i> pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Filtering is not available or not enabled for the port
- */
-IX_ETH_DB_PUBLIC
-IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag)
- *
- * @brief Sets the default 802.1Q VLAN tag for a given port
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to set the default VLAN tag to
- * @param vlanTag @ref IxEthDBVlanTag [in] - default 802.1Q VLAN tag
- *
- * The tag format has 16 bits and it is defined in the IEEE802.1Q specification.
- * This tag will be used for tagging untagged frames (if enabled) and classifying
- * unexpedited traffic into an internal traffic class (using the user priority field).
- *
- * <table border="1"> <caption> 802.1Q tag format </caption>
- *    <tr> <td>  <b> 3 bits   <td> <b> 1 bit <td> <b> 12 bits </b>
- *    <tr> <td> user priority <td>  CFI  <td>   VID
- * </table>
- *
- * User Priority : Defines user priority, giving eight (2^3) priority levels. IEEE 802.1P defines 
- * the operation for these 3 user priority bits
- * 
- * CFI : Canonical Format Indicator is always set to zero for Ethernet switches. CFI is used for 
- * compatibility reason between Ethernet type network and Token Ring type network. If a frame received 
- * at an Ethernet port has a CFI set to 1, then that frame should not be forwarded as it is to an untagged port. 
- *
- * VID : VLAN ID is the identification of the VLAN, which is basically used by the standard 802.1Q. 
- * It has 12 bits and allow the id entification of 4096 (2^12) VLANs. Of the 4096 possible VIDs, a VID of 0 
- * is used to identify priority frames and value 4095 (FFF) is reserved, so the maximum possible VLAN 
- * configurations are 4,094.
- * 
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_ETH_DB_INVALID_VLAN <i>vlanTag</i> argument does not parse to a valid 802.1Q VLAN tag
- *
- * @note a VLAN ID value of 0 indicates that the port is not part of any VLAN
- * @note the value of the cannonical frame indicator (CFI) field is ignored, the 
- * field being used only in frame tagging operations
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag)
- *
- * @brief Retrieves the default 802.1Q port VLAN tag for a given port (see also @ref ixEthDBPortVlanTagSet)
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to retrieve the default VLAN tag from
- * @param vlanTag @ref IxEthDBVlanTag [out] - location to write the default port 802.1Q VLAN tag to
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid vlanTag pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag)
- *
- * @brief Sets the 802.1Q VLAN tag for a database record
- *
- * @param macAddr MAC address
- * @param vlanTag 802.1Q VLAN tag
- *
- * This function is used together with @ref ixEthDBVlanTagGet to provide MAC-based VLAN classification support.
- * Please note that the bridging application must contain specific code to make use of this feature (see below).
- * 
- * VLAN tags can be set only in IX_ETH_DB_FILTERING_RECORD or IX_ETH_DB_FILTERING_VLAN_RECORD type records.
- * If to an IX_ETH_DB_FILTERING_RECORD type record is added a VLAN tag the record type is automatically
- * changed to IX_ETH_DB_FILTERING_VLAN_RECORD. Once this has occurred the record type will never
- * revert to a non-VLAN type (unless deleted and re-added).
- *
- * Record types used for different purposes (such as IX_ETH_DB_WIFI_RECORD) will be ignored by
- * this function.
- *
- * After using this function to associate a VLAN ID with a MAC address the VLAN ID can be extracted knowing the
- * MAC address using @ref ixEthDBVlanTagGet. This mechanism can be used to implement MAC-based VLAN classification
- * if a bridging application searches for the VLAN tag when receiving a frame based on the source MAC address 
- * (contained in the <i>ixp_ne_src_mac</i> field of the buffer header).
- * If found in the database, the application can instruct the NPE to tag the frame by writing the VLAN tag
- * in the <i>ixp_ne_vlan_tci</i> field of the buffer header. This way the NPE will inspect the Egress tagging
- * rule associated with the given VLAN ID on the Tx port and tag the frame if Egress tagging on the VLAN is
- * allowed. Additionally, Egress tagging can be forced by setting the <i>ixp_ne_tx_flags.tag_over</i> and 
- * <i>ixp_ne_tx_flags.tag_mode</i> flags in the buffer header.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @note this function will <b>not</b> add a filtering record, it can only be used to update an existing one
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer
- * @retval IX_ETH_DB_NO_SUCH_ADDR a filtering record with the specified MAC address was not found
- * @retval IX_ETH_DB_INVALID_VLAN <i>vlanTag</i> argument does not parse to a valid 802.1Q VLAN tag
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag)
- *
- * @brief Retrieves the 802.1Q VLAN tag from a database record given the record MAC address
- *
- * @param macAddr MAC address
- * @param vlanTag location to write the record 802.1Q VLAN tag to
- *
- * @note VLAN tags can be retrieved only from IX_ETH_DB_FILTERING_VLAN_RECORD type records
- * 
- * This function is used together with ixEthDBVlanTagSet to provide MAC-based VLAN classification support.
- * Please note that the bridging application must contain specific code to make use of this feature (see @ref ixEthDBVlanTagSet).
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>vlanTag</i> pointer
- * @retval IX_ETH_DB_NO_SUCH_ADDR a filtering record with the specified MAC address was not found
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID)
- *
- * @brief Adds a VLAN ID to a port's VLAN membership table
- *
- * Adding a VLAN ID to a port's VLAN membership table will cause frames tagged with the specified 
- * VLAN ID to be accepted by the frame filter, if Ingress VLAN membership filtering is enabled.
- * 
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to add the VLAN ID membership to
- * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be added to the port membership table
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_VLAN vlanID is not a valid VLAN ID
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- *
- * @note A port's default VLAN ID is always in its own membership table, hence there
- * is no need to explicitly add it using this function (although it is not an error
- * to do so)
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax)
- *
- * @brief Adds a VLAN ID range to a port's VLAN membership table
- *
- * All the VLAN IDs in the specified range will be added to the port VLAN
- * membership table, including the range start and end VLAN IDs. Tagged frames with
- * VLAN IDs in the specified range will be accepted by the frame filter, if Ingress VLAN
- * membership filtering is enabled.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to add the VLAN membership range into
- * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN ID range
- * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN ID range
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_VLAN the specified VLAN IDs are invalid or do not constitute a range
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- *
- * @note Is is valid to use the same VLAN ID for both vlanIDMin and vlanIDMax, in which case this
- * function will behave as @ref ixEthDBPortVlanMembershipAdd
- *
- * @note A port's default VLAN ID is always in its own membership table, hence there is no need
- * to explicitly add it using this function (although it is not an error to do so)
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID)
- *
- * @brief Removes a VLAN ID from a port's VLAN membership table
- *
- * Frames tagged with a VLAN ID which is not in a port's VLAN membership table
- * will be discarded by the frame filter, if Ingress membership filtering is enabled.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to remove the VLAN ID membership from
- * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be removed from the port membership table
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_INVALID_VLAN vlanID is not a valid VLAN ID
- * @retval IX_ETH_DB_NO_PERMISSION attempted to remove the default VLAN ID
- * from the port membership table (vlanID was set to the default port VLAN ID)
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- *
- * @note A port's default VLAN ID cannot be removed from the port's membership
- * table; attempting it will return IX_ETH_DB_NO_PERMISSION
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax)
- *
- * @brief Removes a VLAN ID range from a port's VLAN membership table
- *
- * All the VLAN IDs in the specified range will be removed from the port VLAN
- * membership table, including the range start and end VLAN IDs. Tagged frames
- * with VLAN IDs in the range will be discarded by the frame filter, if Ingress
- * membership filtering is enabled.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to remove the VLAN membership range from
- * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN ID range
- * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN ID range
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_VLAN the specified VLAN IDs are invalid or do not constitute a range
- * @retval IX_ETH_DB_NO_PERMISSION attempted to remove the default VLAN ID
- * from the port membership table (both vlanIDMin and vlanIDMax were set to the default port VLAN ID)
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- *
- * @note Is is valid to use the same VLAN ID for both vlanIDMin and vlanIDMax, in which case
- * function will behave as @ref ixEthDBPortVlanMembershipRemove
- *
- * @note If the given range overlaps the default port VLAN ID this function
- * will remove all the VLAN IDs in the range except for the port VLAN ID from its 
- * own membership table. This situation will be silently dealt with (no error message
- * will be returned) as long as the range contains more than one value (i.e. at least 
- * one other value, apart from the default port VLAN ID). If the function is called 
- * with the vlanIDMin and vlanIDMax parameters both set to the port default VLAN ID, the 
- * function will infer that an attempt was specifically made to remove the default port 
- * VLAN ID from the port membership table, in which case the return value will be 
- * IX_ETH_DB_NO_PERMISSION.
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
- *
- * @brief Sets a port's VLAN membership table
- *
- * Sets a port's VLAN membership table from a complete VLAN table containing all the possible
- * 4096 VLAN IDs. The table format is an array containing 4096 bits (512 bytes), where each bit
- * indicates whether the VLAN at that bit index is in the port's membership list (if set) or
- * not (unset).
- *
- * The bit at index 0, indicating VLAN ID 0, indicates no VLAN membership and therefore no
- * other bit must be set if bit 0 is set.
- *
- * The bit at index 4095 is reserved and should never be set (it will be ignored if set).
- *
- * The bit referencing the same VLAN ID as the default port VLAN ID should always be set, as 
- * the membership list must contain at least the default port VLAN ID.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to set the VLAN membership table to
- * @param vlanSet @ref IxEthDBVlanSet [in] - pointer to the VLAN membership table
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
- *
- * @brief Retrieves a port's VLAN membership table
- *
- * Retrieves the complete VLAN membership table from a port, containing all the possible
- * 4096 VLAN IDs. The table format is an array containing 4096 bits (512 bytes), where each bit
- * indicates whether the VLAN at that bit index is in the port's membership list (if set) or
- * not (unset).
- *
- * The bit at index 0, indicating VLAN ID 0, indicates no VLAN membership and therefore no
- * other bit will be set if bit 0 is set.
- *
- * The bit at index 4095 is reserved and will not be set (it will be ignored if set).
- *
- * The bit referencing the same VLAN ID as the default port VLAN ID will always be set, as 
- * the membership list must contain at least the default port VLAN ID.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to retrieve the VLAN membership table from
- * @param vlanSet @ref IxEthDBVlanSet [out] - pointer a location where the VLAN membership table will be
- *                written to 
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter)
- *
- * @brief Sets a port's acceptable frame type filter
- *
- * The acceptable frame type is one (or a combination) of the following values:
- *    - IX_ETH_DB_ACCEPT_ALL_FRAMES       - accepts all the frames
- *    - IX_ETH_DB_UNTAGGED_FRAMES         - accepts untagged frames
- *    - IX_ETH_DB_VLAN_TAGGED_FRAMES      - accepts tagged frames
- *    - IX_ETH_DB_PRIORITY_TAGGED_FRAMES  - accepts tagged frames with VLAN ID set to 0 (no VLAN membership)
- *
- * Except for using the exact values given above only the following combinations are valid:
- *    - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES
- *    - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_PRIORITY_TAGGED_FRAMES
- *
- * Please note that IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES is equivalent
- * to IX_ETH_DB_ACCEPT_ALL_FRAMES.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @note by default the acceptable frame type filter is set to IX_ETH_DB_ACCEPT_ALL_FRAMES
- *
- * @note setting the acceptable frame type to PRIORITY_TAGGED_FRAMES is internally
- * accomplished by changing the frame filter to VLAN_TAGGED_FRAMES and setting the
- * VLAN membership list to include only VLAN ID 0; the membership list will need
- * to be restored manually to an appropriate value if the acceptable frame type
- * filter is changed back to ACCEPT_ALL_FRAMES or VLAN_TAGGED_FRAMES; failure to do so
- * will filter all VLAN traffic bar frames tagged with VLAN ID 0
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to set the acceptable frame type filter to
- * @param frameFilter @ref IxEthDBFrameFilter [in] - acceptable frame type filter
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid frame type filter
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter)
- *
- * @brief Retrieves a port's acceptable frame type filter 
- *
- * For a description of the acceptable frame types see @ref ixEthDBAcceptableFrameTypeSet
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - port ID to retrieve the acceptable frame type filter from
- * @param frameFilter @ref IxEthDBFrameFilter [out] - location to store the acceptable frame type filter
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>frameFilter</i> pointer argument
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable)
- *
- * @brief Sets a port's priority mapping table
- *
- * The priority mapping table is an 8x2 table mapping a QoS (user) priority into an internal
- * traffic class. There are 8 valid QoS priorities (0..7, 0 being the lowest) which can be
- * mapped into one of the 4 available traffic classes (0..3, 0 being the lowest).
- * If a custom priority mapping table is not specified using this function the following
- * default priority table will be used (as per IEEE 802.1Q and IEEE 802.1D):
- * 
- * <table border="1"> <caption> QoS traffic classes  </caption>
- *    <tr> <td> <b> QoS priority <td> <b> Default traffic class <td> <b> Traffic type </b>
- *    <tr> <td>      0       <td>           1           <td> Best effort, default class for unexpedited traffic
- *    <tr> <td>      1       <td>           0           <td> Background traffic
- *    <tr> <td>      2       <td>           0           <td> Spare bandwidth
- *    <tr> <td>      3       <td>           1           <td> Excellent effort
- *    <tr> <td>      4       <td>           2           <td> Controlled load
- *    <tr> <td>      5       <td>           2           <td> Video traffic
- *    <tr> <td>      6       <td>           3           <td> Voice traffic
- *    <tr> <td>      7       <td>           3           <td> Network control
- * </table>
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - port ID of the port to set the priority mapping table to
- * @param priorityTable @ref IxEthDBPriorityTable [in] - location of the user priority table
- *
- * @note The provided table will be copied into internal data structures in EthDB and 
- * can be deallocated by the called after this function has completed its execution, if
- * so desired
- *
- * @warning The number of available traffic classes differs depending on the NPE images
- * and queue configuration. Check IxEthDBQoS.h for up-to-date information on the availability of
- * traffic classes. Note that specifiying a traffic class in the priority map which exceeds
- * the system availability will produce an IX_ETH_DB_INVALID_PRIORITY return error code and no
- * priority will be remapped.
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>priorityTable</i> pointer
- * @retval IX_ETH_DB_INVALID_PRIORITY at least one priority value exceeds
- * the current number of available traffic classes
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable)
- *
- * @brief Retrieves a port's priority mapping table
- *
- * The priority mapping table for the given port will be copied in the location
- * specified by the caller using "priorityTable"
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID ID @ref IxEthDBPortId [in] - of the port to retrieve the priority mapping table from
- * @param priorityTable @ref IxEthDBPriorityTable [out] - pointer to a user specified location where the table will be copied to
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid priorityTable pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass)
- *
- * @brief Sets one QoS/user priority => traffic class mapping in a port's priority mapping table
- *
- * This function establishes a mapping between a user (QoS) priority and an internal traffic class.
- * The mapping will be saved in the port's priority mapping table. Use this function when not all
- * the QoS priorities need remapping (see also @ref ixEthDBPriorityMappingTableSet)
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to set the mapping to
- * @param userPriority @ref IxEthDBPriority [in] - user (QoS) priority, between 0 and 7 (0 being the lowest)
- * @param trafficClass @ref IxEthDBPriority [in] - internal traffic class, between 0 and 3 (0 being the lowest)
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_PRIORITY <i>userPriority</i> out of range or
- * <i>trafficClass</i> is beyond the number of currently available traffic classes
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass)
- *
- * @brief Retrieves one QoS/user priority => traffic class mapping in a port's priority mapping table
- *
- * This function retrieves the internal traffic class associated with a QoS (user) priority from a given
- * port's priority mapping table. Use this function when not all the QoS priority mappings are 
- * required (see also @ref ixEthDBPriorityMappingTableGet)
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to set the mapping to
- * @param userPriority @ref IxEthDBPriority [in] - user (QoS) priority, between 0 and 7 (0 being the lowest)
- * @param trafficClass @ref IxEthDBPriority [out] - location to write the corresponding internal traffic class to
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_PRIORITY invalid userPriority value (out of range)
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>trafficClass</i> pointer argument
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled)
- *
- * @brief Enables or disables Egress VLAN tagging for a port and a given VLAN
- *
- * This function enables or disables Egress VLAN tagging for the given port and VLAN ID.
- * If the VLAN tagging for a certain VLAN ID is enabled then all the frames to be
- * transmitted on the given port tagged with the same VLAN ID will be transmitted in a tagged format.
- * If tagging is not enabled for the given VLAN ID, the VLAN tag from the frames matching
- * this VLAN ID will be removed (the frames will be untagged).
- *
- * VLAN ID 4095 is reserved and should never be used with this function.
- * VLAN ID 0 has the special meaning of "No VLAN membership" and it is used in this
- * context to allow the port to send priority-tagged frames or not.
- *
- * By default, no Egress VLAN tagging is enabled on any port.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on
- * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be matched against outgoing frames
- * @param enabled BOOL [in] - true to enable Egress VLAN tagging on the port and given VLAN, and
- *                false to disable Egress VLAN tagging
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range)
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled)
- *
- * @brief Retrieves the Egress VLAN tagging enabling status for a port and VLAN ID
- *
- * @param portID [in] - ID of the port to extract the Egress VLAN ID tagging status from
- * @param vlanID VLAN [in] - ID whose tagging status is to be extracted
- * @param enabled [in] - user-specifed location where the status is copied to; following
- * the successfull execution of this function the value will be true if Egress VLAN
- * tagging is enabled for the given port and VLAN ID, and false otherwise
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @see ixEthDBEgressVlanEntryTaggingEnabledGet
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range)
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>enabled</i> argument pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled)
- *
- * @brief Enables or disables Egress VLAN tagging for a port and given VLAN range
- *
- * This function is very similar to @ref ixEthDBEgressVlanEntryTaggingEnabledSet with the
- * difference that it can manipulate the Egress tagging status on multiple VLAN IDs,
- * defined by a contiguous range. Note that both limits in the range are explicitly 
- * included in the execution of this function.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on
- * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN range to be matched against outgoing frames
- * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN range to be matched against outgoing frames
- * @param enabled BOOL [in] - true to enable Egress VLAN tagging on the port and given VLAN range,
- *                and false to disable Egress VLAN tagging
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range), or do not constitute a range
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_ETH_DB_NO_PERMISSION attempted to explicitly remove the default port VLAN ID from the tagging table
- * @retval IX_FAIL unknown OS or NPE communication error
- *
- * @note Specifically removing the default port VLAN ID from the Egress tagging table by setting both vlanIDMin and vlanIDMax
- * to the VLAN ID portion of the PVID is not allowed by this function and will return IX_ETH_DB_NO_PERMISSION.
- * However, this can be circumvented, should the user specifically desire this, by either using a 
- * larger range (vlanIDMin < vlanIDMax) or by using ixEthDBEgressVlanEntryTaggingEnabledSet.
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
- *
- * @brief Sets the complete Egress VLAN tagging table for a port
- *
- * This function is used to set the VLAN tagging/untagging per VLAN ID for a given port
- * covering the entire VLAN ID range (0..4094). The <i>vlanSet</i> parameter is a 4096
- * bit array, each bit indicating the Egress behavior for the corresponding VLAN ID.
- * If a bit is set then outgoing frames with the corresponding VLAN ID will be transmitted
- * with the VLAN tag, otherwise the frame will be transmitted without the VLAN tag.
- *
- * Bit 0 has a special significance, indicating tagging or tag removal for priority-tagged
- * frames.
- *
- * Bit 4095 is reserved and should never be set (it will be ignored if set).
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port whose Egress VLAN tagging behavior is set
- * @param vlanSet @ref IxEthDBVlanSet [in] - 4096 bit array controlling per-VLAN tagging and untagging 
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- *
- * @warning This function will automatically add the default port VLAN ID to the Egress tagging table
- * every time it is called. The user should manually call ixEthDBEgressVlanEntryTaggingEnabledSet to
- * prevent tagging on the default port VLAN ID if the default behavior is not intended.
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
- *
- * @brief Retrieves the complete Egress VLAN tagging table from a port
- *
- * This function copies the 4096 bit table controlling the Egress VLAN tagging into a user specified
- * area. Each bit in the array indicates whether tagging for the corresponding VLAN (the bit position
- * in the array) is enabled (the bit is set) or not (the bit is unset). 
- *
- * Bit 4095 is reserved and should not be set (it will be ignored if set).
- *
- * @see ixEthDBEgressVlanTaggingEnabledSet
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port whose Egress VLAN tagging behavior is retrieved
- * @param vlanSet @ref IxEthDBVlanSet [out] - user location to copy the Egress tagging table into; should have
- * room to store 4096 bits (512 bytes)
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction)
- *
- * @brief Sets the Ingress VLAN tagging behavior for a port
- *
- * A port's Ingress tagging behavior is controlled by the taggingAction parameter,
- * which can take one of the following values:
- * 
- * - IX_ETH_DB_PASS_THROUGH - leaves the frame unchanged (does not add or remove the VLAN tag)
- * - IX_ETH_DB_ADD_TAG - adds the VLAN tag if not present, using the default port VID
- * - IX_ETH_DB_REMOVE_TAG - removes the VLAN tag if present
- * 
- * @param portID @ref IxEthDBPortId [in] - ID of the port whose Ingress VLAN tagging behavior is set
- * @param taggingAction @ref IxEthDBTaggingAction [in] - tagging behavior for the port
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>taggingAction</i> argument
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction)
- *
- * @brief Retrieves the Ingress VLAN tagging behavior from a port (see @ref ixEthDBIngressVlanTaggingEnabledSet)
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port whose Ingress VLAN tagging behavior is set
- * @param taggingAction @ref IxEthDBTaggingAction [out] - location where the tagging behavior for the port is written to
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>taggingAction</i> pointer argument
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable)
- *
- * @brief Enables or disables port ID extraction
- *
- * This feature can be used in the situation when a multi-port device (e.g. a switch) 
- * is connected to an IXP4xx port and the device can provide incoming frame port 
- * identification by tagging the TPID field in the Ethernet frame. Enabling
- * port extraction will instruct the NPE to copy the TPID field from the frame and 
- * place it in the <i>ixp_ne_src_port</i> of the <i>ixp_buf</i> header. In addition,
- * the NPE restores the TPID field to 0.
- *
- * If the frame is not tagged the NPE will fill the <i>ixp_ne_src_port</i> with the 
- * port ID of the MII interface the frame was received from.
- *
- * The TPID field is the least significant byte of the type/length field, which is 
- * normally set to 0x8100 for 802.1Q-tagged frames.
- *
- * This feature is disabled by default.
- *
- * @param portID ID of the port to configure port ID extraction on
- * @param enable true to enable port ID extraction and false to disable it
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
- * @retval IX_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet)
- *
- * @brief Retrieves the feature capability set for a port
- *
- * This function retrieves the feature capability set for a port or the common capabilities shared between all 
- * the ports, writing the feature capability set in a user specified location.
- *
- * The feature capability set will consist of a set formed by OR-ing one or more of the following values:
- * - IX_ETH_DB_LEARNING - Learning feature; enables EthDB to learn MAC address (filtering) records, including 802.1Q enabled records
- * - IX_ETH_DB_FILTERING - Filtering feature; enables EthDB to communicate with the NPEs for downloading filtering information in the NPEs; depends on the learning feature
- * - IX_ETH_DB_VLAN_QOS - VLAN/QoS feature; enables EthDB to configure NPEs to operate in VLAN/QoS aware modes
- * - IX_ETH_DB_FIREWALL - Firewall feature; enables EthDB to configure NPEs to operate in firewall mode, using white/black address lists
- * - IX_ETH_DB_SPANNING_TREE_PROTOCOL - Spanning tree protocol feature; enables EthDB to configure the NPEs as STP nodes
- * - IX_ETH_DB_WIFI_HEADER_CONVERSION - WiFi 802.3 to 802.11 header conversion feature; enables EthDB to handle WiFi conversion data
- *
- * Note that EthDB provides only the LEARNING feature for non-NPE ports.
- * 
- * @param portID @ref IxEthDBPortId [in] - ID of the port to retrieve the capability set for 
- * (use IX_ETH_DB_ALL_PORTS to retrieve the common capabilities shared between all the ports)
- * @param featureSet @ref IxEthDBFeature [out] - location where the capability set will be written to
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>featureSet</i> pointer
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enabled)
- *
- * @brief Enables or disables one or more EthDB features
- *
- * Selects one or more features (see @ref ixEthDBFeatureCapabilityGet for a description of the supported
- * features) to be enabled or disabled on the selected port (or all the ports).
- *
- * Note that some features are mutually incompatible:
- * - IX_ETH_DB_FILTERING is incompatible with IX_ETH_DB_WIFI_HEADER_CONVERSION
- *
- * Also note that some features require other features to be enabled: 
- * - IX_ETH_DB_FILTERING requires IX_ETH_DB_LEARNING
- *
- * This function will either enable the entire selected feature set for the selected port (or all the ports),
- * in which case it will return IX_ETH_DB_SUCCESS, or in case of error it will not enable any feature at all
- * and return an appropriate error message.
- *
- * The following features are enabled by default (for ports with the respective capability), 
- * for compatibility reasons with previous versions of CSR:
- * - IX_ETH_DB_LEARNING
- * - IX_ETH_DB_FILTERING
- *
- * All other features are disabled by default and require manual enabling using ixEthDBFeatureEnable.
- *
- * <b>Default settings for VLAN, QoS, Firewall and WiFi header conversion features:</b>
- *
- * <i>VLAN</i>
- *
- * When the VLAN/QoS feature is enabled for a port for the first time the default VLAN behavior 
- * of the port is set to be as <b>permissive</b> (it will accept all the frames) and 
- * <b>non-interferential</b> (it will not change any frames) as possible:
- * - the port VLAN ID (VID) is set to 0
- * - the Ingress acceptable frame filter is set to accept all frames
- * - the VLAN port membership is set to the complete VLAN range (0 - 4094)
- * - the Ingress tagging mode is set to pass-through (will not change frames)
- * - the Egress tagging mode is to send tagged frames in the entire VLAN range (0 - 4094)
- *
- * Note that further disabling and re-enabling the VLAN feature for a given port will not reset the port VLAN behavior
- * to the settings listed above. Any VLAN settings made by the user are kept.
- *
- * <i>QoS</i>
- *
- * The following default priority mapping table will be used (as per IEEE 802.1Q and IEEE 802.1D):
- * 
- * <table border="1"> <caption> QoS traffic classes  </caption>
- *    <tr> <td> <b> QoS priority <td> <b> Default traffic class <td> <b> Traffic type </b>
- *    <tr> <td>      0       <td>           1           <td> Best effort, default class for unexpedited traffic
- *    <tr> <td>      1       <td>           0           <td> Background traffic
- *    <tr> <td>      2       <td>           0           <td> Spare bandwidth
- *    <tr> <td>      3       <td>           1           <td> Excellent effort
- *    <tr> <td>      4       <td>           2           <td> Controlled load
- *    <tr> <td>      5       <td>           2           <td> Video traffic
- *    <tr> <td>      6       <td>           3           <td> Voice traffic
- *    <tr> <td>      7       <td>           3           <td> Network control
- * </table>
- *
- * <i> Firewall </i>
- *  
- * The port firewall is configured by default in <b>black-list mode</b>, and the firewall address table is empty.
- * This means the firewall will not filter any frames until the feature is configured and the firewall table is
- * downloaded to the NPE.
- *
- * <i> Spanning Tree </i>
- *
- * The port is set to <b>STP unblocked mode</b>, therefore it will accept all frames until re-configured.
- *
- * <i> WiFi header conversion </i>
- *
- * The WiFi header conversion database is empty, therefore no actual header conversion will take place until this
- * feature is configured and the conversion table downloaded to the NPE.
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the features on (use IX_ETH_DB_ALL_PORTS for all the ports)
- * @param feature @ref IxEthDBFeature [in] - feature or feature set to enable or disable
- * @param enabled BOOL [in] - true to enable the feature and false to disable it
- * 
- * @note Certain features, from a functional point of view, cannot be disabled as such at NPE level;
- * when such features are set to <i>disabled</i> using the EthDB API they will be configured in such
- * a way to determine a behavior equivalent to the feature being disabled. As well as this, disabled
- * features cannot be configured or accessed via the EthDB API (except for getting their status).
- *
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_NO_PERMISSION attempted to enable mutually exclusive features, 
- * or a feature that depends on another feature which is not present or enabled
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE at least one of the features selected is unavailable
- * @retval IX_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enabled);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled)
- *
- * @brief Retrieves the availability and status of a feature set
- *
- * This function returns the availability and status for a feature set.
- * Note that if more than one feature is selected (e.g. IX_ETH_DB_LEARNING | IX_ETH_DB_FILTERING)
- * the "present" and "enabled" return values will be set to true only if all the features in the
- * feature set are present and enabled (not only some). 
- * 
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param feature @ref IxEthDBFeature [in] - identifier of the feature to retrieve the status for
- * @param present BOOL [out] - location where a boolean flag indicating whether this feature is present will be written to
- * @param enabled BOOL [out] - location where a boolean flag indicating whether this feature is enabled will be written to
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG either <i>present</i> or <i>enabled</i> pointer argument is invalid
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value)
- *
- * @brief Retrieves the value of a feature property
- *
- * The EthDB features usually contain feature-specific properties describing or
- * controlling how the feature operates. While essential properties (e.g. the
- * firewall operating mode) have their own API, secondary properties can be 
- * retrieved using this function.
- *
- * Properties can be read-only or read-write. ixEthDBFeaturePropertyGet operates with
- * both types of features.
- *
- * Properties have types associated with them. A descriptor indicating the property
- * type is returned in the <i>type</i> argument for convenience.
- *
- * The currently supported properties and their corresponding features are as follows:
- *
- * <table border="1"> <caption> Properties for IX_ETH_DB_VLAN_QOS </caption>
- *    <tr> <td> <b>        Property identifier                  <td> <b> Property type          <td> <b> Property value                   <td> <b> Read-Only </b>
- *    <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY      <td> IX_ETH_DB_INTEGER_PROPERTY <td> number of internal traffic classes   <td> Yes
- *    <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 0 <td> Yes
- *    <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_1_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 1 <td> Yes
- *    <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_2_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 2 <td> Yes
- *    <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_3_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 3 <td> Yes
- *    <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_4_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 4 <td> Yes
- *    <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_5_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 5 <td> Yes
- *    <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_6_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 6 <td> Yes
- *    <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 7 <td> Yes
- * </table>
- * 
- * @see ixEthDBFeaturePropertySet
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param feature @ref IxEthDBFeature [in] - EthDB feature for which the property is retrieved
- * @param property @ref IxEthDBProperty [in] - property identifier
- * @param type @ref IxEthDBPropertyType [out] - location where the property type will be stored
- * @param value void [out] - location where the property value will be stored
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_INVALID_ARG invalid property identifier, <i>type</i> or <i>value</i> pointer arguments
- * @retval IX_ETH_DB_FAIL incorrect property value or unknown error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value)
- *
- * @brief Sets the value of a feature property
- *
- * Unlike @ref ixEthDBFeaturePropertyGet, this function operates only with read-write properties
- *
- * The currently supported properties and their corresponding features are as follows:
- *
- *   - IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE (for IX_ETH_DB_VLAN_QOS): freezes the availability of traffic classes
- *     to the number of traffic classes currently in use
- *
- * Note that this function creates deep copies of the property values; once the function is invoked the client 
- * can free or reuse the memory area containing the original property value.
- *
- * Copy behavior for different property types is defined as follows:
- *
- *   - IX_ETH_DB_INTEGER_PROPERTY   - 4 bytes are copied from the source location
- *   - IX_ETH_DB_STRING_PROPERTY    - the source string will be copied up to the NULL '\0' string terminator, maximum of 255 characters
- *   - IX_ETH_DB_MAC_ADDR_PROPERTY  - 6 bytes are copied from the source location
- *   - IX_ETH_DB_BOOL_PROPERTY      - 4 bytes are copied from the source location; the only allowed values are true (1L) and false (0L)
- *
- * @see ixEthDBFeaturePropertySet
- *
- * @warning IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE is provided for EthAcc internal use; 
- * do not attempt to set this property directly
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param feature @ref IxEthDBFeature [in] - EthDB feature for which the property is set
- * @param property @ref IxEthDBProperty [in] - property identifier
- * @param value void [in] - location where the property value is to be copied from
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_INVALID_ARG invalid property identifier, <i>value</i> pointer, or invalid property value
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType)
- *
- * @brief Deletes a set of record types from the Ethernet Database
- *
- * This function deletes all the records of certain types (specified in the recordType filter)
- * associated with a port. Additionally, the IX_ETH_DB_ALL_PORTS value can be used as port ID
- * to indicate that the specified record types should be deleted for all the ports.
- *
- * The record type filter can be an ORed combination of the following types:
- *
- * <caption> Record types </caption>
- *    - IX_ETH_DB_FILTERING_RECORD      <table><caption> Filtering record </caption>
- *                                               <tr><td> MAC address <td> static/dynamic type <td> age </tr>
- *                                             </table> 
- *
- *    - IX_ETH_DB_FILTERING_VLAN_RECORD <table><caption> VLAN-enabled filtering record </caption>
- *                                               <tr><td> MAC address <td> static/dynamic type <td> age <td> 802.1Q tag </tr>
- *                                             </table> 
- *
- *    - IX_ETH_DB_WIFI_RECORD           <table><caption> WiFi header conversion record </caption>
- *                                                <tr><td> MAC address <td> optional gateway MAC address <td> </tr>
- *                                             </table>
- *
- *    - IX_ETH_DB_FIREWALL_RECORD       <table><caption> Firewall record </caption>
- *                                                <tr><td> MAC address </tr>
- *                                             </table>
- *    - IX_ETH_DB_ALL_RECORD_TYPES
- * 
- * Any combination of the above types is valid e.g. 
- *
- *    (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD | IX_ETH_DB_FIREWALL_RECORD), 
- *
- * although some might be redundant (it is not an error to do so) e.g.
- *
- *    (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_ALL_RECORD_TYPES)
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port
- * @param recordType @ref IxEthDBRecordType [in] - record type filter
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>recordType</i> filter
- *
- * @note If the record type filter contains any unrecognized value (hence the 
- * IX_ETH_DB_INVALID_ARG error value is returned) no actual records will be deleted.
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
- *
- * @brief Adds an "Access Point to Station" record to the database, for 802.3 => 802.11 frame 
- * header conversion
- *
- * Frame header conversion is controlled by the set of MAC addresses
- * added using @ref ixEthDBWiFiStationEntryAdd and @ref ixEthDBWiFiAccessPointEntryAdd.
- * Conversion arguments are added using @ref ixEthDBWiFiFrameControlSet, 
- * @ref ixEthDBWiFiDurationIDSet and @ref ixEthDBWiFiBBSIDSet.
- *
- * Note that adding the same MAC address twice will not return an error
- * (but will not accomplish anything either), while re-adding a record previously added
- * as an "Access Point to Access Point" will migrate the record to the "Access Point
- * to Station" type.
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to add
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_INVALID_ARG macAddr is an invalid pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled 
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
- * @retval IX_ETH_DB_NOMEM maximum number of records reached
- * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr)
- *
- * @brief Adds an "Access Point to Access Point" record to the database
- *
- * @see ixEthDBWiFiStationEntryAdd
- *
- * Note that adding the same MAC address twice will simply overwrite the previously
- * defined gateway MAC address value in the same record, if the record was previously of the
- * "Access Point to Access Point" type.
- *
- * Re-adding a MAC address as "Access Point to Access Point", which was previously added as 
- * "Access Point to Station" will migrate the record type to "Access Point to Access Point" and
- * record the gateway MAC address.
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to add
- * @param gatewayMacAddr @ref IxEthDBMacAddr [in] - MAC address of the gateway Access Point
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG macAddr is an invalid pointer
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled 
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>gatewayMacAddr</i> pointer argument
- * @retval IX_ETH_DB_NOMEM maximum number of records reached
- * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
- *
- * @brief Removes a WiFi station record
- *
- * This function removes both types of WiFi records ("Access Point to Station" and
- * "Access Point to Access Point").
- * 
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to remove
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
- * @retval IX_ETH_DB_NO_SUCH_ADDR specified address was not found in the database
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled 
- * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID)
- *
- * @brief Downloads the MAC address table for 802.3 => 802.11 frame header
- * conversion to the NPE
- *
- * Note that the frame conversion MAC address table must be individually downloaded
- * to each NPE for which the frame header conversion feature is enabled (i.e. it
- * is not possible to specify IX_ETH_DB_ALL_PORTS).
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
- * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl)
- *
- * @brief Sets the GlobalFrameControl field
- *
- * The GlobalFrameControl field is a 2-byte value inserted in the <i>Frame Control</i>
- * field for all 802.3 to 802.11 frame header conversions
- * 
- * @param portID @ref IxEthDBPortId [in] - ID of the port
- * @param frameControl UINT16 [in] - GlobalFrameControl value
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
- * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID)
- *
- * @brief Sets the GlobalDurationID field
- *
- * The GlobalDurationID field is a 2-byte value inserted in the <i>Duration/ID</i>
- * field for all 802.3 to 802.11 frame header conversions
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param durationID UINT16 [in] - GlobalDurationID field
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
- * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid)
- *
- * @brief Sets the BBSID field
- *
- * The BBSID field is a 6-byte value which
- * identifies the infrastructure of the service set managed 
- * by the Access Point having the IXP400 as its processor. The value
- * is written in the <i>BBSID</i> field of the 802.11 frame header.
- * The BBSID value is the MAC address of the Access Point.
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param bbsid @ref IxEthDBMacAddr [in] - pointer to 6 bytes containing the BSSID
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>bbsid</i> pointer argument
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
- * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked)
- *
- * @brief Sets the STP blocked/unblocked state for a port
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param blocked BOOL [in] - true to set the port as STP blocked, false to set it as unblocked
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Spanning Tree Protocol feature not enabled
- * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked)
- *
- * @brief Retrieves the STP blocked/unblocked state for a port
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param blocked BOOL * [in] - set to true if the port is STP blocked, false otherwise
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>blocked</i> pointer argument
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Spanning Tree Protocol feature not enabled
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode)
- *
- * @brief Sets the firewall mode to use white or black listing
- *
- * When enabled, the NPE MAC address based firewall support operates in two modes:
- *
- * - white-list mode (MAC address based admission) 
- *    - <i>mode</i> set to IX_ETH_DB_FIREWALL_WHITE_LIST
- *    - only packets originating from MAC addresses contained in the firewall address list
- *      are allowed on the Rx path
- * - black-list mode (MAC address based blocking)  
- *    - <i>mode</i> set to IX_ETH_DB_FIREWALL_BLACK_LIST
- *    - packets originating from MAC addresses contained in the firewall address list
- *      are discarded
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param mode @ref IxEthDBFirewallMode [in] - firewall mode (IX_ETH_DB_FIREWALL_WHITE_LIST or IX_ETH_DB_FIREWALL_BLACK_LIST)
- *
- * @note by default the firewall operates in black-list mode with an empty address
- * list, hence it doesn't filter any packets
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled 
- * @retval IX_ETH_DB_INVALID_ARGUMENT <i>mode</i> argument is not a valid firewall configuration mode
- * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
-*/
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable)
- *
- * @brief Enables or disables invalid MAC address filtering
- *
- * According to IEEE802 it is illegal for a source address to be a multicast
- * or broadcast address. If this feature is enabled the NPE inspects the source
- * MAC addresses of incoming frames and discards them if invalid addresses are
- * detected.
- *
- * By default this service is enabled, if the firewall feature is supported by the
- * NPE image.
- *
- * @param portID ID of the port 
- * @param enable true to enable invalid MAC address filtering and false to disable it
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled 
- * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
- *
- * @brief Adds a MAC address to the firewall address list
- *
- * Note that adding the same MAC address twice will not return an error
- * but will not actually accomplish anything.
- *
- * The firewall MAC address list has a limited number of entries; once
- * the maximum number of entries has been reached this function will failed
- * to add more addresses, returning IX_ETH_DB_NOMEM.
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to be added
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
- * @retval IX_ETH_DB_NOMEM maximum number of records reached
- * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled 
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
- *
- * @brief Removes a MAC address from the firewall address list
- *
- * @param portID @ref IxEthDBPortId [in] - ID of the port 
- * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to be removed
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
- * @retval IX_ETH_DB_NO_SUCH_ADDR address not found
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled 
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID)
- *
- * @brief Downloads the MAC firewall table to a port
- *
- * @param portID ID of the port 
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
- * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
- * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled 
- * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field)
- *
- * @brief Adds a user-defined field to a database record
- *
- * This function associates a user-defined field to a database record.
- * The user-defined field is passed as a <i>(void *)</i> parameter, hence it can be used
- * for any purpose (such as identifying a structure). Retrieving the user-defined field from
- * a record is done using @ref ixEthDBUserFieldGet. Note that EthDB never uses the user-defined
- * field for any internal operation and it is not aware of the significance of its contents. The
- * field is only stored as a pointer.
- *
- * The database record is identified using a combination of the given parameters, depending on the record type.
- * All the record types require the record MAC address.
- *
- * - IX_ETH_DB_FILTERING_RECORD requires only the MAC address
- * - IX_ETH_DB_VLAN_FILTERING_RECORD requires the MAC address and the VLAN ID
- * - IX_ETH_DB_WIFI_RECORD requires the MAC address and the portID
- * - IX_ETH_DB_FIREWALL_RECORD requires the MAC address and the portID
- *
- * Please note that if a parameter is not required it is completely ignored (it does not undergo parameter checking).
- * The user-defined field can be cleared using a <b>NULL</b> <i>field</i> parameter.
- *
- * @param recordType @ref IxEthDBRecordType [in] - type of record (can be IX_ETH_DB_FILTERING_RECORD, 
- * IX_ETH_DB_FILTERING_VLAN_RECORD, IX_ETH_DB_WIFI_RECORD or IX_ETH_DB_FIREWALL_RECORD)
- * @param portID @ref IxEthDBPortId [in] - ID of the port (required only for WIFI and FIREWALL records) 
- * @param macAddr @ref IxEthDBMacAddr * [in] - MAC address of the record
- * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID of the record (required only for FILTERING_VLAN records)
- * @param field void * [in] - user defined field
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID was required but it is not a valid port identifier
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
- * @retval IX_ETH_DB_NO_SUCH_ADDR record not found
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field);
-
-/**
- * @ingroup IxEthDB
- *
- * @fn IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void **field)
- *
- * @brief Retrieves a user-defined field from a database record
- *
- * The database record is identified using a combination of the given parameters, depending on the record type.
- * All the record types require the record MAC address.
- *
- * - IX_ETH_DB_FILTERING_RECORD requires only the MAC address
- * - IX_ETH_DB_VLAN_FILTERING_RECORD requires the MAC address and the VLAN ID
- * - IX_ETH_DB_WIFI_RECORD requires the MAC address and the portID
- * - IX_ETH_DB_FIREWALL_RECORD requires the MAC address and the portID
- *
- * Please note that if a parameter is not required it is completely ignored (it does not undergo parameter checking).
- *
- * If no user-defined field was registered with the specified record then <b>NULL</b> will be written
- * at the location specified by <i>field</i>.
- *
- * @param recordType type of record (can be IX_ETH_DB_FILTERING_RECORD, IX_ETH_DB_FILTERING_VLAN_RECORD, IX_ETH_DB_WIFI_RECORD 
- * or IX_ETH_DB_FIREWALL_RECORD)
- * @param portID ID of the port (required only for WIFI and FIREWALL records) 
- * @param macAddr MAC address of the record
- * @param vlanID VLAN ID of the record (required only for FILTERING_VLAN records)
- * @param field location to write the user defined field into
- * 
- * @retval IX_ETH_DB_SUCCESS operation completed successfully
- * @retval IX_ETH_DB_INVALID_PORT portID was required but it is not a valid port identifier
- * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>field</i> pointer arguments
- * @retval IX_ETH_DB_NO_SUCH_ADDR record not found
- */
-IX_ETH_DB_PUBLIC 
-IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portId, IxEthDBVlanId vlanID, void **field);
-
-/**
- * @}
- */
-
-#endif /* IxEthDB_H */
diff --git a/drivers/net/npe/include/IxEthDBLocks_p.h b/drivers/net/npe/include/IxEthDBLocks_p.h
deleted file mode 100644
index 91ab441..0000000
--- a/drivers/net/npe/include/IxEthDBLocks_p.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/**
- * @file IxEthAccDBLocks_p.h
- *
- * @brief Definition of transaction lock stacks and lock utility macros
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxEthAccDBLocks_p_H
-#define IxEthAccDBLocks_p_H
-
-#include "IxOsPrintf.h"
-
-/* Lock and lock stacks */
-typedef struct
-{
-    IxOsalFastMutex* locks[MAX_LOCKS];
-    UINT32 stackPointer, basePointer;
-} LockStack;
-
-#define TRY_LOCK(mutex) \
-    { \
-        if (ixOsalFastMutexTryLock(mutex) != IX_SUCCESS) \
-        { \
-            return IX_ETH_DB_BUSY; \
-        } \
-    }
-
-
-#define UNLOCK(mutex) { ixOsalFastMutexUnlock(mutex); }
-
-#define INIT_STACK(stack) \
-    { \
-        (stack)->basePointer  = 0; \
-        (stack)->stackPointer = 0; \
-    }
-
-#define PUSH_LOCK(stack, lock) \
-    { \
-        if ((stack)->stackPointer == MAX_LOCKS) \
-        { \
-            ERROR_LOG("Ethernet DB: maximum number of elements in a lock stack has been exceeded on push, heavy chaining?\n"); \
-            UNROLL_STACK(stack); \
-            \
-            return IX_ETH_DB_NOMEM; \
-        } \
-        \
-        if (ixOsalFastMutexTryLock(lock) == IX_SUCCESS) \
-        { \
-            (stack)->locks[(stack)->stackPointer++] = (lock); \
-        } \
-        else \
-        { \
-            UNROLL_STACK(stack); \
-            \
-            return IX_ETH_DB_BUSY; \
-        } \
-    }
-
-#define POP_LOCK(stack) \
-    { \
-        ixOsalFastMutexUnlock((stack)->locks[--(stack)->stackPointer]); \
-    }
-
-#define UNROLL_STACK(stack) \
-    { \
-        while ((stack)->stackPointer > (stack)->basePointer) \
-        { \
-            POP_LOCK(stack); \
-        } \
-    }
-
-#define SHIFT_STACK(stack) \
-    { \
-        if ((stack)->basePointer == MAX_LOCKS - 1) \
-        { \
-            ERROR_LOG("Ethernet DB: maximum number of elements in a lock stack has been exceeded on shift, heavy chaining?\n"); \
-            UNROLL_STACK(stack); \
-            \
-            return IX_ETH_DB_BUSY; \
-        } \
-        \
-        ixOsalFastMutexUnlock((stack)->locks[(stack)->basePointer++]); \
-    }
-
-#endif /* IxEthAccDBLocks_p_H */
diff --git a/drivers/net/npe/include/IxEthDBLog_p.h b/drivers/net/npe/include/IxEthDBLog_p.h
deleted file mode 100644
index b357623..0000000
--- a/drivers/net/npe/include/IxEthDBLog_p.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/**
- * @file IxEthDBLog_p.h
- *
- * @brief definitions of log macros and log configuration
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include <IxOsal.h>
-
-#ifdef IX_UNIT_TEST
-#define NULL_PRINT_ROUTINE(format, arg...) /* nothing */
-#else
-#define NULL_PRINT_ROUTINE if(0) printf
-#endif
-
-/***************************************************
- *                 Globals                         *
- ***************************************************/
-/* safe to permanently leave these on */
-#define HAS_ERROR_LOG
-#define HAS_ERROR_IRQ_LOG
-#define HAS_WARNING_LOG
-
-/***************************************************
- *              Log Configuration                  *
- ***************************************************/
-
-/* debug output can be turned on unless specifically
-   declared as a non-debug build */
-#ifndef NDEBUG
-
-#undef HAS_EVENTS_TRACE
-#undef HAS_EVENTS_VERBOSE_TRACE
-
-#undef HAS_SUPPORT_TRACE
-#undef HAS_SUPPORT_VERBOSE_TRACE
-
-#undef HAS_NPE_TRACE
-#undef HAS_NPE_VERBOSE_TRACE
-#undef HAS_DUMP_NPE_TREE
-
-#undef HAS_UPDATE_TRACE
-#undef HAS_UPDATE_VERBOSE_TRACE
-
-#endif /* NDEBUG */
-
-
-/***************************************************
- *              Log Macros                         *
- ***************************************************/
-
-/************** Globals ******************/
-
-#ifdef HAS_ERROR_LOG
-
-    #define ERROR_LOG printf
-
-#else
-
-    #define ERROR_LOG NULL_PRINT_ROUTINE
-
-#endif
-
-#ifdef HAS_ERROR_IRQ_LOG
-
-    #define ERROR_IRQ_LOG(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6)
-
-#else
-
-    #define ERROR_IRQ_LOG(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */
-
-#endif
-
-#ifdef HAS_WARNING_LOG
-
-    #define WARNING_LOG printf
-
-#else
-
-    #define WARNING_LOG NULL_PRINT_ROUTINE
-
-#endif
-
-/************** Events *******************/
-
-#ifdef HAS_EVENTS_TRACE
-
-    #define IX_ETH_DB_EVENTS_TRACE     printf
-    #define IX_ETH_DB_IRQ_EVENTS_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6)
-
-    #ifdef HAS_EVENTS_VERBOSE_TRACE
-
-        #define IX_ETH_DB_EVENTS_VERBOSE_TRACE printf
-    
-    #else
-
-        #define IX_ETH_DB_EVENTS_VERBOSE_TRACE NULL_PRINT_ROUTINE
-
-    #endif /* HAS_EVENTS_VERBOSE_TRACE */
-
-#else
-
-    #define IX_ETH_DB_EVENTS_TRACE         NULL_PRINT_ROUTINE
-    #define IX_ETH_DB_EVENTS_VERBOSE_TRACE NULL_PRINT_ROUTINE
-    #define IX_ETH_DB_IRQ_EVENTS_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */
-
-#endif /* HAS_EVENTS_TRACE */
-
-/************** Support *******************/
-
-#ifdef HAS_SUPPORT_TRACE
-
-    #define IX_ETH_DB_SUPPORT_TRACE     printf
-    #define IX_ETH_DB_SUPPORT_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6)
-
-    #ifdef HAS_SUPPORT_VERBOSE_TRACE
-
-        #define IX_ETH_DB_SUPPORT_VERBOSE_TRACE printf
-
-    #else
-
-        #define IX_ETH_DB_SUPPORT_VERBOSE_TRACE NULL_PRINT_ROUTINE
-
-    #endif /* HAS_SUPPORT_VERBOSE_TRACE */
-
-#else
-
-    #define IX_ETH_DB_SUPPORT_TRACE         NULL_PRINT_ROUTINE
-    #define IX_ETH_DB_SUPPORT_VERBOSE_TRACE NULL_PRINT_ROUTINE
-    #define IX_ETH_DB_SUPPORT_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */
-
-#endif /* HAS_SUPPORT_TRACE */
-
-/************** NPE Adaptor *******************/
-
-#ifdef HAS_NPE_TRACE
-
-    #define IX_ETH_DB_NPE_TRACE     printf
-    #define IX_ETH_DB_NPE_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6)
-
-    #ifdef HAS_NPE_VERBOSE_TRACE
-
-        #define IX_ETH_DB_NPE_VERBOSE_TRACE printf
-
-    #else
-
-        #define IX_ETH_DB_NPE_VERBOSE_TRACE NULL_PRINT_ROUTINE
-
-    #endif /* HAS_NPE_VERBOSE_TRACE */
-
-#else
-
-    #define IX_ETH_DB_NPE_TRACE         NULL_PRINT_ROUTINE
-    #define IX_ETH_DB_NPE_VERBOSE_TRACE NULL_PRINT_ROUTINE
-    #define IX_ETH_DB_NPE_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */
-
-#endif /* HAS_NPE_TRACE */
-
-#ifdef HAS_DUMP_NPE_TREE
-
-#define IX_ETH_DB_NPE_DUMP_ELT(eltBaseAddress, eltSize) ixEthELTDumpTree(eltBaseAddress, eltSize)
-
-#else
-
-#define IX_ETH_DB_NPE_DUMP_ELT(eltBaseAddress, eltSize) /* nothing */
-
-#endif /* HAS_DUMP_NPE_TREE */
-
-/************** Port Update *******************/
-
-#ifdef HAS_UPDATE_TRACE
-
-    #define IX_ETH_DB_UPDATE_TRACE printf
-
-    #ifdef HAS_UPDATE_VERBOSE_TRACE
-
-        #define IX_ETH_DB_UPDATE_VERBOSE_TRACE printf
-
-    #else
-
-        #define IX_ETH_DB_UPDATE_VERBOSE_TRACE NULL_PRINT_ROUTINE
-
-    #endif
-
-#else /* HAS_UPDATE_VERBOSE_TRACE */
-
-    #define IX_ETH_DB_UPDATE_TRACE         NULL_PRINT_ROUTINE
-    #define IX_ETH_DB_UPDATE_VERBOSE_TRACE NULL_PRINT_ROUTINE
-
-#endif /* HAS_UPDATE_TRACE */
diff --git a/drivers/net/npe/include/IxEthDBMessages_p.h b/drivers/net/npe/include/IxEthDBMessages_p.h
deleted file mode 100644
index 5907fd5..0000000
--- a/drivers/net/npe/include/IxEthDBMessages_p.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/**
- * @file IxEthDBMessages_p.h
- *
- * @brief Definitions of NPE messages
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxEthDBMessages_p_H
-#define IxEthDBMessages_p_H
-
-#include <IxEthNpe.h>
-#include <IxOsCacheMMU.h>
-#include "IxEthDB_p.h"
-
-/* events watched by the Eth event processor */
-#define IX_ETH_DB_MIN_EVENT_ID        (IX_ETHNPE_EDB_GETMACADDRESSDATABASE)
-#define IX_ETH_DB_MAX_EVENT_ID        (IX_ETHNPE_PC_SETAPMACTABLE)
-
-/* macros to fill and extract data from NPE messages - place any endian conversions here */
-#define RESET_ELT_MESSAGE(message) { memset((void *) &(message), 0, sizeof((message))); }
-#define NPE_MSG_ID(msg) ((msg).data[0] >> 24)
-
-#define FILL_SETPORTVLANTABLEENTRY_MSG(message, portID, setOffset, vlanMembershipSet, ttiSet) \
-    do { \
-        message.data[0] = (IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY << 24) | (portID << 16) | (setOffset * 2); \
-        message.data[1] = (vlanMembershipSet << 8) | ttiSet; \
-    } while (0);
-
-#define FILL_SETPORTVLANTABLERANGE_MSG(message, portID, offset, length, zone) \
-    do { \
-        message.data[0] = IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE << 24 | portID << 16 | offset << 9 | length << 1; \
-        message.data[1] = (UINT32) zone; \
-    } while (0);
-
-#define FILL_SETDEFAULTRXVID_MSG(message, portID, tpid, vlanTag) \
-    do { \
-        message.data[0] = (IX_ETHNPE_VLAN_SETDEFAULTRXVID << 24) \
-            | (portID << 16); \
-        \
-        message.data[1] = (tpid << 16) | vlanTag; \
-    } while (0);
-
-#define FILL_SETRXTAGMODE_MSG(message, portID, filterMode, tagMode) \
-    do { \
-        message.data[0] = IX_ETHNPE_VLAN_SETRXTAGMODE << 24 \
-            | portID << 16 \
-            | filterMode << 2 \
-            | tagMode; \
-        \
-        message.data[1] = 0; \
-    } while (0);
-
-#define FILL_SETRXQOSENTRY(message, portID, classIndex, trafficClass, aqmQueue) \
-    do { \
-        message.data[0] = IX_ETHNPE_VLAN_SETRXQOSENTRY << 24 \
-            | portID << 16 \
-            | classIndex; \
-        \
-        message.data[1] = trafficClass << 24 \
-            | 0x1 << 23 \
-            | aqmQueue << 16 \
-            | aqmQueue << 4; \
-    } while (0);
-
-#define FILL_SETPORTIDEXTRACTIONMODE(message, portID, enable) \
-    do { \
-        message.data[0] = IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE << 24 \
-            | portID << 16 \
-            | (enable ? 0x1 : 0x0); \
-        \
-        message.data[1] = 0; \
-    } while (0);
-
-
-#define FILL_SETBLOCKINGSTATE_MSG(message, portID, blocked) \
-    do { \
-        message.data[0] = IX_ETHNPE_STP_SETBLOCKINGSTATE << 24 \
-            | portID << 16 \
-            | (blocked ? 0x1 : 0x0); \
-        \
-        message.data[1] = 0; \
-    } while (0);
-
-#define FILL_SETBBSID_MSG(message, portID, bbsid) \
-    do { \
-        message.data[0] = IX_ETHNPE_PC_SETBBSID << 24 \
-            | portID << 16 \
-            | bbsid->macAddress[0] << 8 \
-            | bbsid->macAddress[1]; \
-        \
-        message.data[1] = bbsid->macAddress[2] << 24 \
-            | bbsid->macAddress[3] << 16 \
-            | bbsid->macAddress[4] << 8 \
-            | bbsid->macAddress[5]; \
-    } while (0);
-
-#define FILL_SETFRAMECONTROLDURATIONID(message, portID, frameControlDurationID) \
-    do { \
-        message.data[0] = (IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID << 24) | (portID << 16); \
-        message.data[1] = frameControlDurationID; \
-    } while (0);
-
-#define FILL_SETAPMACTABLE_MSG(message, zone) \
-    do { \
-        message.data[0] = IX_ETHNPE_PC_SETAPMACTABLE << 24 \
-            | 0 << 8      /* always use index 0 */ \
-            | 64;         /* 32 entries, 8 bytes each, 4 bytes in a word */ \
-        message.data[1] = (UINT32) zone; \
-    } while (0);
-
-#define FILL_SETFIREWALLMODE_MSG(message, portID, epDelta, mode, address) \
-    do { \
-        message.data[0] = IX_ETHNPE_FW_SETFIREWALLMODE << 24 \
-            | portID << 16 \
-            | (epDelta & 0xFF) << 8 \
-            | mode; \
-        \
-        message.data[1] = (UINT32) address; \
-    } while (0);
-
-#define FILL_SETMACADDRESSDATABASE_MSG(message, portID, epDelta, blockCount, address) \
-    do { \
-        message.data[0] = IX_ETHNPE_EDB_SETMACADDRESSSDATABASE << 24 \
-                | (epDelta & 0xFF) << 8 \
-                | (blockCount & 0xFF); \
-        \
-        message.data[1] = (UINT32) address; \
-    } while (0);
-
-#define FILL_GETMACADDRESSDATABASE(message, npeId, zone) \
-    do { \
-        message.data[0] = IX_ETHNPE_EDB_GETMACADDRESSDATABASE << 24; \
-        message.data[1] = (UINT32) zone; \
-    } while (0);
-
-#define FILL_SETMAXFRAMELENGTHS_MSG(message, portID, maxRxFrameSize, maxTxFrameSize) \
-    do { \
-        message.data[0] = IX_ETHNPE_SETMAXFRAMELENGTHS << 24 \
-            | portID << 16 \
-            | ((maxRxFrameSize + 63) / 64) << 8  /* max Rx 64-byte blocks */ \
-            | (maxTxFrameSize + 63) / 64; /* max Tx 64-byte blocks */ \
-        \
-        message.data[1] = maxRxFrameSize << 16 | maxTxFrameSize; \
-    } while (0);
-
-#define FILL_SETPORTADDRESS_MSG(message, portID, macAddress) \
-    do { \
-        message.data[0] = IX_ETHNPE_EDB_SETPORTADDRESS << 24 \
-            | portID << 16 \
-            | macAddress[0] << 8 \
-            | macAddress[1]; \
-        \
-        message.data[1] = macAddress[2] << 24 \
-            | macAddress[3] << 16 \
-            | macAddress[4] << 8 \
-            | macAddress[5]; \
-    } while (0);
-
-/* access to a MAC node in the NPE tree */
-#define NPE_NODE_BYTE(eltNodeAddr, offset)      (((UINT8 *) (eltNodeAddr))[offset])
-
-/* browsing of the implicit linear binary tree structure of the NPE tree */
-#define LEFT_CHILD_OFFSET(offset)   ((offset) << 1)
-#define RIGHT_CHILD_OFFSET(offset)  (((offset) << 1) + 1)
-
-#define IX_EDB_FLAGS_ACTIVE         (0x2)
-#define IX_EDB_FLAGS_VALID          (0x1)
-#define IX_EDB_FLAGS_RESERVED       (0xfc)
-#define IX_EDB_FLAGS_INACTIVE_VALID (0x1)
-
-#define IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET (6)
-#define IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET   (7)
-#define IX_EDB_NPE_NODE_WIFI_INDEX_OFFSET  (6)
-#define IX_EDB_NPE_NODE_WIFI_FLAGS_OFFSET  (7)
-#define IX_EDB_NPE_NODE_FW_FLAGS_OFFSET    (1)
-#define IX_EDB_NPE_NODE_FW_RESERVED_OFFSET (6)
-#define IX_EDB_NPE_NODE_FW_ADDR_OFFSET     (2)
-
-#define IX_EDB_NPE_NODE_VALID(address)     ((NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) & IX_EDB_FLAGS_VALID) != 0)
-#define IX_EDB_NPE_NODE_ACTIVE(address)    ((NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) & IX_EDB_FLAGS_ACTIVE) != 0)
-#define IX_EDB_NPE_NODE_PORT_ID(address)   (NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET))
-
-/* macros to send messages to the NPEs */
-#define IX_ETHDB_ASYNC_SEND_NPE_MSG(npeId, msg, result) \
-    do { \
-        result = ixNpeMhMessageSend(npeId, msg, IX_NPEMH_SEND_RETRIES_DEFAULT); \
-        \
-        if (result != IX_SUCCESS) \
-        { \
-            ERROR_LOG("DB: Failed to send NPE message\n"); \
-        } \
-    } while (0);
-
-#define IX_ETHDB_SYNC_SEND_NPE_MSG(npeId, msg, result) \
-    do { \
-        result = ixNpeMhMessageWithResponseSend(npeId, msg, msg.data[0] >> 24, ixEthDBNpeMsgAck, IX_NPEMH_SEND_RETRIES_DEFAULT); \
-        \
-        if (result == IX_SUCCESS) \
-        { \
-            result = ixOsalMutexLock(&ixEthDBPortInfo[IX_ETH_DB_NPE_TO_PORT_ID(npeId)].npeAckLock, IX_ETH_DB_NPE_TIMEOUT); \
-            \
-            if (result != IX_SUCCESS) \
-            { \
-                ERROR_LOG("DB: NPE failed to respond within %dms\n", IX_ETH_DB_NPE_TIMEOUT); \
-            } \
-        } \
-        else \
-        { \
-            ERROR_LOG("DB: Failed to send NPE message\n"); \
-        } \
-    } while (0);
-
-#ifndef IX_NDEBUG
-#define IX_ETH_DB_NPE_MSG_HISTORY_DEPTH (100)
-extern IX_ETH_DB_PUBLIC UINT32 npeMsgHistory[IX_ETH_DB_NPE_MSG_HISTORY_DEPTH][2];
-extern IX_ETH_DB_PUBLIC UINT32 npeMsgHistoryLen;
-#endif
-
-#define IX_ETHDB_SEND_NPE_MSG(npeId, msg, result) { LOG_NPE_MSG(msg); IX_ETHDB_SYNC_SEND_NPE_MSG(npeId, msg, result); }
-
-#endif /* IxEthDBMessages_p_H */
diff --git a/drivers/net/npe/include/IxEthDBPortDefs.h b/drivers/net/npe/include/IxEthDBPortDefs.h
deleted file mode 100644
index 9f5e467..0000000
--- a/drivers/net/npe/include/IxEthDBPortDefs.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/**
- * @file IxEthDBPortDefs.h
- *
- * @brief Public definition of the ports and port capabilities
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxEthDBPortDefs IXP400 Ethernet Database Port Definitions (IxEthDBPortDefs)
- *
- * @brief IXP400 Public definition of the ports and port capabilities
- *
- * @{
- */
-
-#ifndef IxEthDBPortDefs_H
-#define IxEthDBPortDefs_H
-
-/** 
- * @brief Port types - currently only Ethernet NPEs are recognized as specific types 
- * All other (user-defined) ports must be specified as IX_ETH_GENERIC
- */
-typedef enum
-{
-    IX_ETH_GENERIC = 0, /**< generic ethernet port */
-    IX_ETH_NPE          /**< specific Ethernet NPE */
-} IxEthDBPortType;
-
-/** 
- * @brief Port capabilities - used by ixEthAccDatabaseMaintenance to decide whether it
- * should manually age entries or not depending on the port capabilities.
- *
- * Ethernet NPEs have aging capabilities, meaning that they will age the entries
- * automatically (by themselves).*/
-typedef enum
-{
-    IX_ETH_NO_CAPABILITIES = 0,   /**< no aging capabilities */
-    IX_ETH_ENTRY_AGING     = 0x1  /**< aging capabilities present */
-} IxEthDBPortCapability;
-
-/** 
- * @brief Port Definition - a structure contains the Port type and capabilities 
- */
-typedef struct
-{
-    IxEthDBPortType type;
-    IxEthDBPortCapability capabilities;
-} IxEthDBPortDefinition;
-
-/** 
- * @brief Port definitions structure, indexed on the port ID
- * @warning Ports 0 and 1 are used by the Ethernet access component therefore
- * it is essential to be left untouched. Port 2 here (WAN) is given as 
- * an example port. The NPE firmware also assumes the NPE B to be
- * the port 0 and NPE C to be the port 1.
- *
- * @note that only 32 ports (0..31) are supported by EthDB
- */
-static const IxEthDBPortDefinition ixEthDBPortDefinitions[] = 
-{
-    /*    id       type              capabilities */
-    {   /* 0 */    IX_ETH_NPE,       IX_ETH_NO_CAPABILITIES },    /* Ethernet NPE B */
-    {   /* 1 */    IX_ETH_NPE,       IX_ETH_NO_CAPABILITIES },    /* Ethernet NPE C */
-    {   /* 2 */    IX_ETH_NPE,       IX_ETH_NO_CAPABILITIES },    /* Ethernet NPE A */
-    {   /* 3 */    IX_ETH_GENERIC,   IX_ETH_NO_CAPABILITIES },    /* WAN port */
-};
-
-/** 
- * @def IX_ETH_DB_NUMBER_OF_PORTS
- * @brief number of supported ports 
- */
-#define IX_ETH_DB_NUMBER_OF_PORTS ARRAY_SIZE(ixEthDBPortDefinitions)
-
-/**
- * @def IX_ETH_DB_UNKNOWN_PORT
- * @brief definition of an unknown port
- */
-#define IX_ETH_DB_UNKNOWN_PORT (0xff)
-
-/** 
- * @def IX_ETH_DB_ALL_PORTS
- * @brief Special port ID indicating all the ports
- * @note This port ID can be used only by a subset of the EthDB API; each
- * function specifically mentions whether this is a valid parameter as the port ID
- */
-#define IX_ETH_DB_ALL_PORTS (IX_ETH_DB_NUMBER_OF_PORTS + 1)
-
-/**
- * @def IX_ETH_DB_PORTS_ASSERTION
- * @brief catch invalid port definitions (<2) with a 
- * compile-time assertion resulting in a duplicate case error. 
- */
-#define IX_ETH_DB_PORTS_ASSERTION { switch(0) { case 0 : ; case 1 : ; case IX_ETH_DB_NUMBER_OF_PORTS : ; }}
-
-/** 
- * @def IX_ETH_DB_CHECK_PORT(portID)
- * @brief safety checks to verify whether the port is invalid or uninitialized
- */
-#define IX_ETH_DB_CHECK_PORT(portID) \
-{ \
-  if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \
-  { \
-      return IX_ETH_DB_INVALID_PORT; \
-  } \
-  \
-  if (!ixEthDBPortInfo[(portID)].enabled) \
-  { \
-      return IX_ETH_DB_PORT_UNINITIALIZED; \
-  } \
-}
-
-/**
- * @def IX_ETH_DB_CHECK_PORT_ALL(portID)
- * @brief safety checks to verify whether the port is invalid or uninitialized; 
- * tolerates the use of IX_ETH_DB_ALL_PORTS
- */
-#define IX_ETH_DB_CHECK_PORT_ALL(portID) \
-{ \
-  if ((portID) != IX_ETH_DB_ALL_PORTS) \
-    IX_ETH_DB_CHECK_PORT(portID) \
-}
-
-#endif /* IxEthDBPortDefs_H */
-/**
- *@}
- */
diff --git a/drivers/net/npe/include/IxEthDBQoS.h b/drivers/net/npe/include/IxEthDBQoS.h
deleted file mode 100644
index 6276930..0000000
--- a/drivers/net/npe/include/IxEthDBQoS.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/**
- * @file IxEthDBQoS.h
- *
- * @brief Public definitions for QoS traffic classes
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxEthDBPortDefs IXP400 Ethernet QoS definitions
- *
- * @brief IXP00 Public definitions for QoS traffic classes
- *
- * @{
- */
-
-#ifndef IxEthDBQoS_H
-#define IxEthDBQoS_H
-
-/**
- * @def IX_ETH_DB_QUEUE_UNAVAILABLE
- * @brief alias to indicate a queue (traffic class) is not available
- */
-#define IX_ETH_DB_QUEUE_UNAVAILABLE  (0)
-
-#ifndef IX_IEEE802_1Q_QOS_PRIORITY_COUNT
-/**
- * @def IX_IEEE802_1Q_QOS_PRIORITY_COUNT
- * @brief number of QoS priorities, according to IEEE 802.1Q
- */
-#define IX_IEEE802_1Q_QOS_PRIORITY_COUNT (8)
-#endif
-
-/**
- * @brief array containing all the supported traffic class configurations
- */
-static const
-UINT8 ixEthDBQueueAssignments[][IX_IEEE802_1Q_QOS_PRIORITY_COUNT] = 
-{
-    { 4, 5, 6, 7, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE },
-    { 15, 16, 17, 18, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE },
-    { 11, 23, 26, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE,  IX_ETH_DB_QUEUE_UNAVAILABLE },
-    { 4, 5, 6, 7, 8, 9, 10, 11 }
-    /* add here all other cases of queue configuration structures and update ixEthDBTrafficClassDefinitions to use them */
-};
-
-/**
- * @brief value used to index the NPE A functionality ID in the traffic class definition table
- */
-#define IX_ETH_DB_NPE_A_FUNCTIONALITY_ID_INDEX    (0)
-
-/**
- * @brief value used to index the traffic class count in the traffic class definition table
- */
-#define IX_ETH_DB_TRAFFIC_CLASS_COUNT_INDEX       (1)
-
-/**
- * @brief value used to index the queue assignment index in the traffic class definition table
- */
-#define IX_ETH_DB_QUEUE_ASSIGNMENT_INDEX          (2)
-
-/**
- * @brief traffic class definitions
- *
- * This array contains the default traffic class definition configuration,
- * as well as any special cases dictated by the functionality ID of NPE A.
- *
- * The default case should not be removed (otherwise the Ethernet
- * components will assert a fatal failure on initialization).
- */
-static const
-UINT8 ixEthDBTrafficClassDefinitions[][3] = 
-{
-    /* NPE A functionality ID | traffic class count | queue assignment index (points to the queue enumeration in ixEthDBQueueAssignments) */
-    {            0x00,                      4,                    0 }, /* default case - DO NOT REMOVE */
-    {            0x04,                      4,                    1 }, /* NPE A image ID 0.4.0.0 */
-    {            0x09,                      3,                    2 }, /* NPE A image ID 0.9.0.0 */
-    {            0x80,                      8,                    3 }, /* NPE A image ID 10.80.02.0 */
-    {            0x81,                      8,                    3 }, /* NPE A image ID 10.81.02.0 */
-    {            0x82,                      8,                    3 }  /* NPE A image ID 10.82.02.0 */
-};
-
-/**
- * @brief IEEE 802.1Q recommended QoS Priority => traffic class maps
- *
- * @verbatim
-                    Number of available traffic classes
-                    1 2 3 4 5 6 7 8
-    QoS Priority
-        0           0 0 0 1 1 1 1 2
-        1           0 0 0 0 0 0 0 0
-        2           0 0 0 0 0 0 0 1
-        3           0 0 0 1 1 2 2 3
-        4           0 1 1 2 2 3 3 4
-        5           0 1 1 2 3 4 4 5
-        6           0 1 2 3 4 5 5 6
-        7           0 1 2 3 4 5 6 7
-
-    @endverbatim
- */
-static const
-UINT8 ixEthIEEE802_1QUserPriorityToTrafficClassMapping[IX_IEEE802_1Q_QOS_PRIORITY_COUNT][IX_IEEE802_1Q_QOS_PRIORITY_COUNT] = 
- {
-     { 0, 0, 0, 0, 0, 0, 0, 0 }, /* 1 traffic class available */
-     { 0, 0, 0, 0, 1, 1, 1, 1 }, /* 2 traffic classes available */
-     { 0, 0, 0, 0, 1, 1, 2, 2 }, /* 3 traffic classes available */
-     { 1, 0, 0, 1, 2, 2, 3, 3 }, /* 4 traffic classes available */
-     { 1, 0, 0, 1, 2, 3, 4, 4 }, /* 5 traffic classes available */
-     { 1, 0, 0, 2, 3, 4, 5, 5 }, /* 6 traffic classes available */
-     { 1, 0, 0, 2, 3, 4, 5, 6 }, /* 7 traffic classes available */
-     { 2, 0, 1, 3, 4, 5, 6, 7 }  /* 8 traffic classes available */
- };
-
-#endif /* IxEthDBQoS_H */
-
-/**
- *@}
- */
diff --git a/drivers/net/npe/include/IxEthDB_p.h b/drivers/net/npe/include/IxEthDB_p.h
deleted file mode 100644
index ddc10a5..0000000
--- a/drivers/net/npe/include/IxEthDB_p.h
+++ /dev/null
@@ -1,686 +0,0 @@
-/**
- * @file IxEthDB_p.h
- *
- * @brief Private MAC learning API
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxEthDB_p_H
-#define IxEthDB_p_H
-
-#include <IxTypes.h>
-#include <IxOsal.h>
-#include <IxEthDB.h>
-#include <IxNpeMh.h>
-#include <IxEthDBPortDefs.h>
-
-#include "IxEthDBMessages_p.h"
-#include "IxEthDBLog_p.h"
-
-#if (CPU==SIMSPARCSOLARIS)
-
-/* when running unit tests intLock() won't protect the event queue so we lock it manually */
-#define TEST_FIXTURE_LOCK_EVENT_QUEUE   { ixOsalMutexLock(&eventQueueLock, IX_OSAL_WAIT_FOREVER); }
-#define TEST_FIXTURE_UNLOCK_EVENT_QUEUE { ixOsalMutexUnlock(&eventQueueLock); }
-
-#else
-
-#define TEST_FIXTURE_LOCK_EVENT_QUEUE   /* nothing */
-#define TEST_FIXTURE_UNLOCK_EVENT_QUEUE /* nothing */
-
-#endif /* #if(CPU==SIMSPARCSOLARIS) */
-
-#ifndef IX_UNIT_TEST
-
-#define TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER /* nothing */
-#define TEST_FIXTURE_MARK_OVERFLOW_EVENT              /* nothing */
-
-#else
-
-extern int dbAccessCounter;
-extern int overflowEvent;
-
-#define TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER { dbAccessCounter++; }
-#define TEST_FIXTURE_MARK_OVERFLOW_EVENT              { overflowEvent = 1; }
-
-#endif
-
-/* code readability markers */
-#define __mempool__      /* memory pool marker */
-#define __lock__         /* hash write locking marker */
-#define __smartpointer__ /* smart pointer marker - warning: use only clone() when duplicating! */
-#define __alignment__    /* marker for data used only as alignment zones */
-
-/* constants */
-#define IX_ETH_DB_NPE_TIMEOUT (100) /* NPE response timeout, in ms */
-
-/**
- * number of hash table buckets
- * it should be at least 8x the predicted number of entries for performance
- * each bucket needs 8 bytes
- */
-#define NUM_BUCKETS (8192)
-
-/**
- * number of hash table buckets to preload when incrementing bucket iterator
- * = two cache lines
- */
-#define IX_ETHDB_CACHE_LINE_AHEAD (2)
-
-#define IX_ETHDB_BUCKETPTR_AHEAD  ((IX_ETHDB_CACHE_LINE_AHEAD * IX_OSAL_CACHE_LINE_SIZE)/sizeof(void *))
-
-#define IX_ETHDB_BUCKET_INDEX_MASK   (((IX_OSAL_CACHE_LINE_SIZE)/sizeof(void *)) - 1)
-
-/* locks */
-#define MAX_LOCKS (20) /**< maximum number of locks used simultaneously, do not tamper with */
-
-/* learning tree constants */
-#define INITIAL_ELT_SIZE    (8)                              /**< initial byte size of tree (empty unused root size) */
-#define MAX_ELT_SIZE        (512)                            /**< maximum number of entries (includes unused root) */
-#define MAX_GW_SIZE         (32)                             /**< maximum number of gateway entries (including unused root) */
-#define MAX_FW_SIZE         (32)                             /**< maximum number of firewall entries (including unused root) */
-#define ELT_ENTRY_SIZE      (8)                              /**< entry size, in bytes */
-#define ELT_ROOT_OFFSET     (ELT_ENTRY_SIZE)                 /**< tree root offset, in bytes - node preceeding root is unused */
-#define FULL_ELT_BYTE_SIZE  (MAX_ELT_SIZE * ELT_ENTRY_SIZE)  /**< full size of tree, in bytes, including unused root */
-#define FULL_GW_BYTE_SIZE   (MAX_GW_SIZE * ELT_ENTRY_SIZE)   /**< full size of gateway list, in bytes, including unused root */
-#define FULL_FW_BYTE_SIZE   (MAX_FW_SIZE * ELT_ENTRY_SIZE)   /**< full size of firewall table, in bytes, including unused root */
-
-/* maximum size of the VLAN table:
- * 4096 bits (one per VLAN)
- * 8 bits in one byte
- * interleaved VLAN membership and VLAN TTI (*2) */
-#define FULL_VLAN_BYTE_SIZE (4096 / 8 * 2)
-
-/* upper 9 bits used as set index, lower 3 bits as byte index */
-#define VLAN_SET_OFFSET(vlanID) ((vlanID) >> 3)
-#define VLAN_SET_MASK(vlanID)   (0x7 - ((vlanID) & 0x7))
-
-/* Update zone definitions */
-#define NPE_TREE_MEM_SIZE (4096) /* ((511 entries + 1 unused root) * 8 bytes/entry) */
-
-/* check the above value, we rely on 4k */
-#if NPE_TREE_MEM_SIZE != 4096
-    #error NPE_TREE_MEM_SIZE is not defined to 4096 bytes!
-#endif
-
-/* Size Filtering limits (Jumbo frame filtering) */
-#define IX_ETHDB_MAX_FRAME_SIZE     65535 /* other ports than NPE ports */
-#define IX_ETHDB_MIN_FRAME_SIZE         1 /* other ports than NPE ports */
-#define IX_ETHDB_MAX_NPE_FRAME_SIZE 16320 /* NPE ports firmware limit */
-#define IX_ETHDB_MIN_NPE_FRAME_SIZE     1 /* NPE ports firmware limit */
-#define IX_ETHDB_DEFAULT_FRAME_SIZE  1522
-
-/* memory management pool sizes  */
-
-/*
- * Note:
- *
- * NODE_POOL_SIZE controls the maximum number of elements in the database at any one time.
- * It should be large enough to cover all the search trees of all the ports simultaneously.
- *
- * MAC_POOL_SIZE should be higher than NODE_POOL_SIZE by at least the total number of MAC addresses
- * possible to be held at any time in all the ports.
- *
- * TREE_POOL_SIZE should follow the same guideline as for MAC_POOL_SIZE.
- *
- * The database structure described here (2000/4000/4000) is enough for two NPEs holding at most 511
- * entries each plus one PCI NIC holding at most 900 entries.
- */
-
-#define NODE_POOL_SIZE (2000) /**< number of HashNode objects - also master number of elements in the database; each entry has 16 bytes */
-#define MAC_POOL_SIZE  (4000) /**< number of MacDescriptor objects; each entry has 28 bytes */
-#define TREE_POOL_SIZE (4000) /**< number of MacTreeNode objects; each entry has 16 bytes */
-
-/* retry policies */
-#define BUSY_RETRY_ENABLED (true)  /**< if set to true the API will retry automatically calls returning BUSY */
-#define FOREVER_RETRY      (true)  /**< if set to true the API will retry forever BUSY calls */
-#define MAX_RETRIES        (400)   /**< upper retry limit - used only when FOREVER_RETRY is false */
-#define BUSY_RETRY_YIELD   (5)     /**< ticks to yield for every failed retry */
-
-/* event management */
-#define EVENT_QUEUE_SIZE       (500) /**< size of the sink collecting events from the Message Handler FIFO */
-#define EVENT_PROCESSING_LIMIT (100)  /**< batch processing control size (how many events are extracted from the queue at once) */
-
-/* MAC descriptors */
-#define STATIC_ENTRY  (true)
-#define DYNAMIC_ENTRY (false)
-
-/* age reset on next maintenance - incrementing by 1 will reset to 0 */
-#define AGE_RESET (0xFFFFFFFF)
-
-/* dependency maps */
-#define EMPTY_DEPENDENCY_MAP (0)
-
-/* trees */
-#define RIGHT (1)
-#define LEFT  (-1)
-
-/* macros */
-#define IX_ETH_DB_CHECK_PORT_EXISTS(portID) \
-{ \
-    if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \
-    { \
-        return IX_ETH_DB_INVALID_PORT; \
-    } \
-}
-
-#define IX_ETH_DB_CHECK_PORT_INITIALIZED(portID) \
-{ \
-    if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \
-    { \
-        return IX_ETH_DB_INVALID_PORT; \
-    } \
-    else \
-    { \
-        if (!ixEthDBPortInfo[portID].initialized) \
-        { \
-            return IX_ETH_DB_PORT_UNINITIALIZED; \
-        } \
-    } \
-}
-
-/* single NPE check */
-#define IX_ETH_DB_CHECK_SINGLE_NPE(portID) \
-    if (ixEthDBSingleEthNpeCheck(portID) != IX_ETH_DB_SUCCESS) \
-    { \
-        WARNING_LOG("EthDB: port ID %d is unavailable\n",(UINT32) portID); \
-        \
-        return IX_ETH_DB_INVALID_PORT; \
-    }
-
-/* feature check */
-#define IX_ETH_DB_CHECK_FEATURE(portID, feature) \
-    if ((ixEthDBPortInfo[portID].featureStatus & feature) == 0) \
-    { \
-        return IX_ETH_DB_FEATURE_UNAVAILABLE; \
-    }
-
-/* busy retrying */
-#define BUSY_RETRY(functionCall) \
-    { \
-        UINT32 retries = 0; \
-        IxEthDBStatus br_result; \
-        \
-        while ((br_result = functionCall) == IX_ETH_DB_BUSY \
-            && BUSY_RETRY_ENABLED && (FOREVER_RETRY || ++retries < MAX_RETRIES)) { ixOsalSleep(BUSY_RETRY_YIELD); }; \
-        \
-        if ((!FOREVER_RETRY && retries == MAX_RETRIES) || (br_result == IX_ETH_DB_FAIL)) \
-        {\
-            ERROR_LOG("Ethernet Learning Database Error: BUSY_RETRY failed at %s:%d\n", __FILE__, __LINE__); \
-        }\
-    }
-
-#define BUSY_RETRY_WITH_RESULT(functionCall, brwr_result) \
-    { \
-        UINT32 retries = 0; \
-        \
-        while ((brwr_result = functionCall) == IX_ETH_DB_BUSY \
-            && BUSY_RETRY_ENABLED && (FOREVER_RETRY || ++retries < MAX_RETRIES)) { ixOsalSleep(BUSY_RETRY_YIELD); }; \
-        \
-        if ((!FOREVER_RETRY && retries == MAX_RETRIES) || (brwr_result == IX_ETH_DB_FAIL)) \
-        {\
-            ERROR_LOG("Ethernet Learning Database Error: BUSY_RETRY_WITH_RESULT failed at %s:%d\n", __FILE__, __LINE__); \
-        }\
-    }
-
-/* iterators */
-#define IS_ITERATOR_VALID(iteratorPtr) ((iteratorPtr)->node != NULL)
-
-/* dependency port maps */
-
-/* Warning: if port indexing starts from 1 replace (portID) with (portID - 1) in DEPENDENCY_MAP (and make sure IX_ETH_DB_NUMBER_OF_PORTS is big enough) */
-
-/* gives an empty dependency map */
-#define SET_EMPTY_DEPENDENCY_MAP(map)      { int i = 0; for (; i < 32 ; i++) map[i] = 0; }
-
-#define IS_EMPTY_DEPENDENCY_MAP(result, map)       { int i = 0 ; result = true; for (; i < 32 ; i++) if (map[i] != 0) { result = false; break; }}
-
-/**
- * gives a map consisting only of 'portID'
- */
-#define SET_DEPENDENCY_MAP(map, portID)    {SET_EMPTY_DEPENDENCY_MAP(map); map[portID >> 3] = 1 << (portID & 0x7);}
-
-/**
- * gives a map resulting from joining map1 and map2
- */
-#define JOIN_MAPS(map, map1, map2)         { int i = 0; for (; i < 32 ; i++) map[i] = map1[i] | map2[i]; }
-
-/**
- * gives the map resulting from joining portID and map
- */
-#define JOIN_PORT_TO_MAP(map, portID)      { map[portID >> 3] |= 1 << (portID & 0x7); }
-
-/**
- * gives the map resulting from excluding portID from map
- */
-#define EXCLUDE_PORT_FROM_MAP(map, portID) { map[portID >> 3] &= ~(1 << (portID & 0x7); }
-
-/**
- * returns true if map1 is a subset of map2 and false otherwise
- */
-#define IS_MAP_SUBSET(result, map1, map2)  { int i = 0; result = true; for (; i < 32 ; i++) if ((map1[i] | map2[i]) != map2[i]) result = false; }
-
-/**
- * returns true is portID is part of map and false otherwise
- */
-#define IS_PORT_INCLUDED(portID, map)      ((map[portID >> 3] & (1 << (portID & 0x7))) != 0)
-
-/**
- * returns the difference between map1 and map2 (ports included in map1 and not included in map2)
- */
-#define DIFF_MAPS(map, map1, map2)         { int i = 0; for (; i < 32 ; i++) map[i] = map1[i] ^ (map1[i] & map2[i]); }
-
-/**
- * returns true if the maps collide (have at least one port in common) and false otherwise
- */
-#define MAPS_COLLIDE(result, map1, map2)   { int i = 0; result = false; for (; i < 32 ; i++) if ((map1[i] & map2[i]) != 0) result = true; }
-
-/* size (number of ports) of a dependency map */
-#define GET_MAP_SIZE(map, size)            { int i = 0, b = 0; size = 0; for (; i < 32 ; i++) { char y = map[i]; for (; b < 8 && (y >>= 1); b++) size += (y & 1); }}
-
-/* copy map2 into map1 */
-#define COPY_DEPENDENCY_MAP(map1, map2)    { memcpy (map1, map2, sizeof (map1)); }
-
-/* definition of a port map size/port number which cannot be reached (we support at most 32 ports) */
-#define MAX_PORT_SIZE   (0xFF)
-#define MAX_PORT_NUMBER (0xFF)
-
-#define IX_ETH_DB_CHECK_REFERENCE(ptr)   { if ((ptr) == NULL) { return IX_ETH_DB_INVALID_ARG; } }
-#define IX_ETH_DB_CHECK_MAP(portID, map) { if (!IS_PORT_INCLUDED(portID, map)) { return IX_ETH_DB_INVALID_ARG; } }
-
-/* event queue macros */
-#define EVENT_QUEUE_WRAP(offset)            ((offset) >= EVENT_QUEUE_SIZE ? (offset) - EVENT_QUEUE_SIZE : (offset))
-
-#define CAN_ENQUEUE(eventQueuePtr)          ((eventQueuePtr)->length < EVENT_QUEUE_SIZE)
-
-#define QUEUE_HEAD(eventQueuePtr)           (&(eventQueuePtr)->queue[EVENT_QUEUE_WRAP((eventQueuePtr)->base + (eventQueuePtr)->length)])
-
-#define QUEUE_TAIL(eventQueuePtr)           (&(eventQueuePtr)->queue[(eventQueuePtr)->base])
-
-#define PUSH_UPDATE_QUEUE(eventQueuePtr)    { (eventQueuePtr)->length++; }
-
-#define SHIFT_UPDATE_QUEUE(eventQueuePtr) \
-        { \
-            (eventQueuePtr)->base = EVENT_QUEUE_WRAP((eventQueuePtr)->base + 1); \
-            (eventQueuePtr)->length--; \
-        }
-
-#define RESET_QUEUE(eventQueuePtr) \
-    { \
-        (eventQueuePtr)->base   = 0; \
-        (eventQueuePtr)->length = 0; \
-    }
-
-/* node stack macros - used to browse a tree without using a recursive function */
-#define NODE_STACK_INIT(stack)               { (stack)->nodeCount = 0; }
-#define NODE_STACK_PUSH(stack, node, offset) { (stack)->nodes[(stack)->nodeCount] = (node); (stack)->offsets[(stack)->nodeCount++] = (offset); }
-#define NODE_STACK_POP(stack, node, offset)  { (node) = (stack)->nodes[--(stack)->nodeCount]; offset = (stack)->offsets[(stack)->nodeCount]; }
-#define NODE_STACK_NONEMPTY(stack)           ((stack)->nodeCount != 0)
-
-#ifndef IX_NDEBUG
-#define IX_ETH_DB_NPE_MSG_HISTORY_DEPTH (100)
-#define LOG_NPE_MSG(msg) \
-    do { \
-        UINT32 npeMsgHistoryIndex = (npeMsgHistoryLen++) % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; \
-        npeMsgHistory[npeMsgHistoryIndex][0] = msg.data[0]; \
-        npeMsgHistory[npeMsgHistoryIndex][1] = msg.data[1]; \
-    } while (0);
-#else
-#define LOG_NPE_MSG() /* nothing */
-#endif
-
-/* ----------- Data -------------- */
-
-/* typedefs */
-
-typedef UINT32 (*HashFunction)(void *entity);
-typedef BOOL (*MatchFunction)(void *reference, void *entry);
-typedef void (*FreeFunction)(void *entry);
-
-/**
- * basic component of a hash table
- */
-typedef struct HashNode_t
-{
-    void *data;                                 /**< specific data */
-    struct HashNode_t *next;                    /**< used for bucket chaining */
-
-    __mempool__ struct HashNode_t *nextFree;    /**< memory pool management */
-
-    __lock__ IxOsalFastMutex lock;              /**< node lock */
-} HashNode;
-
-/**
- * @brief hash table iterator definition
- *
- * an iterator is an object which can be used
- * to browse a hash table
- */
-typedef struct
-{
-    UINT32 bucketIndex;     /**< index of the currently iterated bucket */
-    HashNode *previousNode; /**< reference to the previously iterated node within the current bucket */
-    HashNode *node;         /**< reference to the currently iterated node */
-} HashIterator;
-
-/**
- * definition of a MAC descriptor (a database record)
- */
-
-typedef enum
-{
-    IX_ETH_DB_WIFI_AP_TO_STA = 0x0,
-    IX_ETH_DB_WIFI_AP_TO_AP  = 0x1
-} IxEthDBWiFiRecordType;
-
-typedef union
-{
-    struct
-    {
-        UINT32 age;
-        BOOL staticEntry; /**< true if this address is static (doesn't age) */
-    } filteringData;
-
-    struct
-    {
-        UINT32 age;
-        BOOL staticEntry;
-        UINT32 ieee802_1qTag;
-      } filteringVlanData;
-
-    struct
-    {
-        IxEthDBWiFiRecordType type;  /**< AP_TO_AP (0x1) or AP_TO_STA (0x0) */
-        UINT32 gwAddressIndex; /**< used only when linearizing the entries for NPE usage */
-        UINT8 gwMacAddress[IX_IEEE803_MAC_ADDRESS_SIZE];
-
-        __alignment__ UINT8 reserved2[2];
-    } wifiData;
-} IxEthDBRecordData;
-
-typedef struct MacDescriptor_t
-{
-    UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE];
-
-    __alignment__ UINT8 reserved1[2];
-
-    UINT32 portID;
-    IxEthDBRecordType type;
-    IxEthDBRecordData recordData;
-
-    /* used for internal operations, such as NPE linearization */
-    void *internal;
-
-    /* custom user data */
-    void *user;
-
-    __mempool__ struct MacDescriptor_t *nextFree;   /**< memory pool management */
-    __smartpointer__ UINT32 refCount;               /**< smart pointer reference counter */
-} MacDescriptor;
-
-/**
- * hash table definition
- */
-typedef struct
-{
-    HashNode *hashBuckets[NUM_BUCKETS];
-    UINT32 numBuckets;
-
-    __lock__ IxOsalFastMutex bucketLocks[NUM_BUCKETS];
-
-    HashFunction entryHashFunction;
-    MatchFunction *matchFunctions;
-    FreeFunction freeFunction;
-} HashTable;
-
-typedef enum
-{
-    IX_ETH_DB_MAC_KEY       = 1,
-    IX_ETH_DB_MAC_PORT_KEY  = 2,
-    IX_ETH_DB_MAC_VLAN_KEY  = 3,
-    IX_ETH_DB_MAX_KEY_INDEX = 3
-} IxEthDBSearchKeyType;
-
-typedef struct MacTreeNode_t
-{
-    __smartpointer__  MacDescriptor *descriptor;
-    struct MacTreeNode_t *left, *right;
-
-    __mempool__ struct MacTreeNode_t *nextFree;
-} MacTreeNode;
-
-typedef IxEthDBStatus (*IxEthDBPortUpdateHandler)(IxEthDBPortId portID, IxEthDBRecordType type);
-
-typedef void (*IxEthDBNoteWriteFn)(void *address, MacTreeNode *node);
-
-typedef struct
-{
-    BOOL updateEnabled;                         /**< true if updates are enabled for port */
-    BOOL userControlled;                        /**< true if the user has manually used ixEthDBPortUpdateEnableSet */
-    BOOL treeInitialized;                       /**< true if the NPE has received an initial tree */
-    IxEthDBPortUpdateHandler updateHandler;     /**< port update handler routine */
-    void *npeUpdateZone;                        /**< port update memory zone */
-    void *npeGwUpdateZone;                      /**< port update memory zone for gateways */
-    void *vlanUpdateZone;                       /**< port update memory zone for VLAN tables */
-    MacTreeNode *searchTree;                    /**< internal search tree, in MacTreeNode representation */
-    BOOL searchTreePendingWrite;                /**< true if searchTree holds a tree pending write to the port */
-} PortUpdateMethod;
-
-typedef struct
-{
-    IxEthDBPortId portID;                   /**< port ID */
-    BOOL enabled;                           /**< true if the port is enabled */
-    BOOL agingEnabled;                      /**< true if aging on this port is enabled */
-    BOOL initialized;
-    IxEthDBPortMap dependencyPortMap;       /**< dependency port map for this port */
-    PortUpdateMethod updateMethod;          /**< update method structure */
-    BOOL macAddressUploaded;                /**< true if the MAC address was uploaded into the port */
-    UINT32 maxRxFrameSize;                  /**< maximum Rx frame size for this port */
-    UINT32 maxTxFrameSize;                  /**< maximum Rx frame size for this port */
-
-    UINT8 bbsid[6];
-    __alignment__ UINT8 reserved[2];
-    UINT32 frameControlDurationID;          /**< Frame Control - Duration/ID WiFi control */
-
-    IxEthDBVlanTag vlanTag;                  /**< default VLAN tag for port */
-    IxEthDBPriorityTable priorityTable;     /**< QoS <=> internal priority mapping */
-    IxEthDBVlanSet vlanMembership;
-    IxEthDBVlanSet transmitTaggingInfo;
-    IxEthDBFrameFilter frameFilter;
-    IxEthDBTaggingAction taggingAction;
-
-    UINT32 npeFrameFilter;
-    UINT32 npeTaggingAction;
-
-    IxEthDBFirewallMode firewallMode;
-    BOOL srcAddressFilterEnabled;
-
-    BOOL stpBlocked;
-
-    IxEthDBFeature featureCapability;
-    IxEthDBFeature featureStatus;
-
-    UINT32 ixEthDBTrafficClassAQMAssignments[IX_IEEE802_1Q_QOS_PRIORITY_COUNT];
-
-    UINT32 ixEthDBTrafficClassCount;
-
-    UINT32 ixEthDBTrafficClassAvailable;
-
-
-
-    __lock__ IxOsalMutex npeAckLock;
-} PortInfo;
-
-/* list of port information structures indexed on port Ids */
-extern IX_ETH_DB_PUBLIC PortInfo ixEthDBPortInfo[IX_ETH_DB_NUMBER_OF_PORTS];
-
-typedef enum
-{
-    IX_ETH_DB_ADD_FILTERING_RECORD    = 0xFF0001,
-    IX_ETH_DB_REMOVE_FILTERING_RECORD = 0xFF0002
-} PortEventType;
-
-typedef struct
-{
-    UINT32 eventType;
-    IxEthDBPortId portID;
-    IxEthDBMacAddr macAddr;
-    BOOL staticEntry;
-} PortEvent;
-
-typedef struct
-{
-    PortEvent queue[EVENT_QUEUE_SIZE];
-    UINT32 base;
-    UINT32 length;
-} PortEventQueue;
-
-typedef struct
-{
-    IxEthDBPortId portID; /**< originating port */
-    MacDescriptor *macDescriptors[MAX_ELT_SIZE]; /**< addresses to be synced into db */
-    UINT32 addressCount; /**< number of addresses */
-} TreeSyncInfo;
-
-typedef struct
-{
-    MacTreeNode *nodes[MAX_ELT_SIZE];
-    UINT32 offsets[MAX_ELT_SIZE];
-    UINT32 nodeCount;
-} MacTreeNodeStack;
-
-/* Prototypes */
-
-/* ----------- Memory management -------------- */
-
-IX_ETH_DB_PUBLIC void ixEthDBInitMemoryPools(void);
-
-IX_ETH_DB_PUBLIC HashNode* ixEthDBAllocHashNode(void);
-IX_ETH_DB_PUBLIC void ixEthDBFreeHashNode(HashNode *);
-
-IX_ETH_DB_PUBLIC __smartpointer__ MacDescriptor* ixEthDBAllocMacDescriptor(void);
-IX_ETH_DB_PUBLIC __smartpointer__ MacDescriptor* ixEthDBCloneMacDescriptor(MacDescriptor *macDescriptor);
-IX_ETH_DB_PUBLIC __smartpointer__ void ixEthDBFreeMacDescriptor(MacDescriptor *);
-
-IX_ETH_DB_PUBLIC __smartpointer__ MacTreeNode* ixEthDBAllocMacTreeNode(void);
-IX_ETH_DB_PUBLIC __smartpointer__ MacTreeNode* ixEthDBCloneMacTreeNode(MacTreeNode *);
-IX_ETH_DB_PUBLIC __smartpointer__ void ixEthDBFreeMacTreeNode(MacTreeNode *);
-
-IX_ETH_DB_PUBLIC void ixEthDBPoolFreeMacTreeNode(MacTreeNode *);
-IX_ETH_DB_PUBLIC UINT32 ixEthDBSearchTreeUsageGet(MacTreeNode *tree);
-IX_ETH_DB_PUBLIC int ixEthDBShowMemoryStatus(void);
-
-/* Hash Table */
-IX_ETH_DB_PUBLIC void ixEthDBInitHash(HashTable *hashTable, UINT32 numBuckets, HashFunction entryHashFunction, MatchFunction *matchFunctions, FreeFunction freeFunction);
-
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBAddHashEntry(HashTable *hashTable, void *entry);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBRemoveHashEntry(HashTable *hashTable, int keyType, void *reference);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBSearchHashEntry(HashTable *hashTable, int keyType, void *reference, HashNode **searchResult);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPeekHashEntry(HashTable *hashTable, int keyType, void *reference);
-IX_ETH_DB_PUBLIC void ixEthDBReleaseHashNode(HashNode *node);
-
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBInitHashIterator(HashTable *hashTable, HashIterator *iterator);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBIncrementHashIterator(HashTable *hashTable, HashIterator *iterator);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBRemoveEntryAtHashIterator(HashTable *hashTable, HashIterator *iterator);
-IX_ETH_DB_PUBLIC void ixEthDBReleaseHashIterator(HashIterator *iterator);
-
-/* API Support */
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
-IX_ETH_DB_PUBLIC void ixEthDBMaximumFrameSizeAckCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg);
-
-/* DB Core functions */
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBInit(void);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBAdd(MacDescriptor *newRecordTemplate, IxEthDBPortMap updateTrigger);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBRemove(MacDescriptor *templateRecord, IxEthDBPortMap updateTrigger);
-IX_ETH_DB_PUBLIC HashNode* ixEthDBSearch(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPeek(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter);
-
-/* Learning support */
-IX_ETH_DB_PUBLIC UINT32 ixEthDBAddressCompare(UINT8 *mac1, UINT8 *mac2);
-IX_ETH_DB_PUBLIC BOOL ixEthDBAddressMatch(void *reference, void *entry);
-IX_ETH_DB_PUBLIC UINT32 ixEthDBEntryXORHash(void *macDescriptor);
-IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyXORHash(void *macAddress);
-
-/* Port updates */
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType type);
-IX_ETH_DB_PUBLIC void ixEthDBUpdatePortLearningTrees(IxEthDBPortMap triggerPorts);
-IX_ETH_DB_PUBLIC void ixEthDBNPEAccessRequest(IxEthDBPortId portID);
-IX_ETH_DB_PUBLIC void ixEthDBUpdateLock(void);
-IX_ETH_DB_PUBLIC void ixEthDBUpdateUnlock(void);
-IX_ETH_DB_PUBLIC MacTreeNode* ixEthDBQuery(MacTreeNode *searchTree, IxEthDBPortMap query, IxEthDBRecordType recordFilter, UINT32 maximumEntries);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32 epDelta);
-
-/* Init/unload */
-IX_ETH_DB_PUBLIC void ixEthDBPortSetAckCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBEventProcessorInit(void);
-IX_ETH_DB_PUBLIC void ixEthDBPortInit(IxEthDBPortId portID);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID);
-IX_ETH_DB_PUBLIC void ixEthDBNPEUpdateAreasInit(void);
-IX_ETH_DB_PUBLIC UINT32 ixEthDBMatchMethodsRegister(MatchFunction *matchFunctions);
-IX_ETH_DB_PUBLIC UINT32 ixEthDBRecordSerializeMethodsRegister(void);
-IX_ETH_DB_PUBLIC UINT32 ixEthDBUpdateTypeRegister(BOOL *typeArray);
-IX_ETH_DB_PUBLIC void ixEthDBNPEUpdateAreasUnload(void);
-IX_ETH_DB_PUBLIC void ixEthDBFeatureCapabilityScan(void);
-IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyTypeRegister(UINT32 *keyType);
-
-/* Event processing */
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBDefaultEventCallbackEnable(IxEthDBPortId portID, BOOL enable);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBTriggerAddPortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBTriggerRemovePortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID);
-IX_ETH_DB_PUBLIC void ixEthDBNPEEventCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg);
-
-/* NPE adaptor */
-IX_ETH_DB_PUBLIC void ixEthDBGetMacDatabaseCbk(IxNpeMhNpeId npeID, IxNpeMhMessage msg);
-IX_ETH_DB_PUBLIC void ixEthDBNpeMsgAck(IxNpeMhNpeId npeID, IxNpeMhMessage msg);
-IX_ETH_DB_PUBLIC void ixEthDBNPESyncScan(IxEthDBPortId portID, void *eltBaseAddress, UINT32 eltSize);
-IX_ETH_DB_PUBLIC void ixEthDBNPETreeWrite(IxEthDBRecordType type, UINT32 totalSize, void *baseAddress, MacTreeNode *tree, UINT32 *blocks, UINT32 *startIndex);
-IX_ETH_DB_PUBLIC void ixEthDBNPEGatewayNodeWrite(void *address, MacTreeNode *node);
-
-/* Other public API functions */
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStartLearningFunction(void);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStopLearningFunction(void);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortUpdateEnableSet(IxEthDBPortId portID, BOOL enableUpdate);
-
-/* Maximum Tx/Rx public functions */
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBFilteringPortMaximumRxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumRxFrameSize);
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBFilteringPortMaximumTxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumTxFrameSize);
-
-/* VLAN-related */
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortVlanTableSet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet);
-
-/* Record search */
-IX_ETH_DB_PUBLIC BOOL ixEthDBAddressRecordMatch(void *untypedReference, void *untypedEntry);
-IX_ETH_DB_PUBLIC BOOL ixEthDBVlanRecordMatch(void *untypedReference, void *untypedEntry);
-IX_ETH_DB_PUBLIC BOOL ixEthDBPortRecordMatch(void *untypedReference, void *untypedEntry);
-IX_ETH_DB_PUBLIC BOOL ixEthDBNullMatch(void *reference, void *entry);
-IX_ETH_DB_PUBLIC HashNode* ixEthDBPortSearch(IxEthDBMacAddr *macAddress, IxEthDBPortId portID, IxEthDBRecordType typeFilter);
-IX_ETH_DB_PUBLIC HashNode* ixEthDBVlanSearch(IxEthDBMacAddr *macAddress, IxEthDBVlanId vlanID, IxEthDBRecordType typeFilter);
-
-/* Utilities */
-IX_ETH_DB_PUBLIC const char* mac2string(const unsigned char *mac);
-IX_ETH_DB_PUBLIC void showHashInfo(void);
-IX_ETH_DB_PUBLIC int ixEthDBAnalyzeHash(void);
-IX_ETH_DB_PUBLIC const char* errorString(IxEthDBStatus error);
-IX_ETH_DB_PUBLIC int numHashElements(void);
-IX_ETH_DB_PUBLIC void zapHashtable(void);
-IX_ETH_DB_PUBLIC BOOL ixEthDBCheckSingleBitValue(UINT32 value);
-
-/* Single Eth NPE Check */
-IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBSingleEthNpeCheck(IxEthDBPortId portId);
-
-#endif /* IxEthDB_p_H */
-
diff --git a/drivers/net/npe/include/IxEthMii.h b/drivers/net/npe/include/IxEthMii.h
deleted file mode 100644
index 8d7de3d..0000000
--- a/drivers/net/npe/include/IxEthMii.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/**
- * @file    IxEthMii.h
- *
- * @brief this file contains the public API of @ref IxEthMii component
- *
- * Design notes :  
- * The main intent of this API is to inplement MII high level fonctionalitoes
- * to support the codelets provided with the IXP400 software releases. It 
- * superceedes previous interfaces provided with @ref IxEThAcc component.
- * 
- * This API has been tested with the PHYs provided with the
- * IXP400 development platforms. It may not work for specific Ethernet PHYs
- * used on specific boards.
- *
- * This source code detects and interface the LXT972, LXT973 and KS6995
- * Ethernet PHYs.
- *
- * This source code should be considered as an example which may need
- * to be adapted for different hardware implementations.
- *
- * It is strongly recommended to use public domain and GPL utilities
- * like libmii, mii-diag for MII interface support.
- * 
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxEthMii_H
-#define IxEthMii_H
-
-#include <IxTypes.h>
-
-/**
- * @defgroup IxEthMii IXP400 Ethernet Phy Access (IxEthMii) API
- *
- * @brief ethMii is a library that does provides access to the 
- * Ethernet PHYs
- *
- *@{
- */
-
-/**
- * @ingroup IxEthMii
- *
- * @fn  ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount)
- *
- * @brief Scan the MDIO bus for PHYs
- *  This function scans PHY addresses 0 through 31, and sets phyPresent[n] to 
- *  true if a phy is discovered at address n.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
- *
- * @param phyPresent BOOL [in] - boolean array of IXP425_ETH_ACC_MII_MAX_ADDR entries
- * @param maxPhyCount UINT32 [in] - number of PHYs to search for (the scan will stop when
- *         the indicated number of PHYs is found).
- *
- * @return IX_STATUS
- * - IX_ETH_ACC_SUCCESS
- * - IX_ETH_ACC_FAIL : invalid arguments.
- *
- * <hr>
- */
-PUBLIC IX_STATUS ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount);
-
-/**
- * @ingroup IxEthMii
- *
- * @fn ixEthMiiPhyConfig(UINT32 phyAddr,
-		         BOOL speed100, 
-			 BOOL fullDuplex, 
-			 BOOL autonegotiate)
- *
- *
- * @brief Configure a PHY
- *   Configure a PHY's speed, duplex and autonegotiation status
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
- *   
- * @param phyAddr UINT32 [in] 
- * @param speed100 BOOL [in] - set to true for 100Mbit/s operation, false for 10Mbit/s
- * @param fullDuplex BOOL [in] - set to true for Full Duplex, false for Half Duplex
- * @param autonegotiate BOOL [in] - set to true to enable autonegotiation
- *
- * @return IX_STATUS
- * - IX_SUCCESS
- * - IX_FAIL : invalid arguments.
- *
- * <hr>
- */
-PUBLIC IX_STATUS ixEthMiiPhyConfig(UINT32 phyAddr,
-				    BOOL speed100, 
-				    BOOL fullDuplex, 
-				    BOOL autonegotiate);
-
-/**
- * @ingroup IxEthMii
- *
- * @fn ixEthMiiPhyLoopbackEnable(UINT32 phyAddr)
- *
- *
- * @brief Enable PHY Loopback in a specific Eth MII port
- *
- * @note When PHY Loopback is enabled, frames sent out to the PHY from the
- * IXP400 will be looped back to the IXP400. They will not be transmitted out
- * on the wire.
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
- *
- * @return IX_STATUS
- * - IX_SUCCESS
- * - IX_FAIL : invalid arguments.
- * <hr>
- */
-PUBLIC IX_STATUS
-ixEthMiiPhyLoopbackEnable (UINT32 phyAddr);
-
-/**
- * @ingroup IxEthMii
- *
- * @fn ixEthMiiPhyLoopbackDisable(UINT32 phyAddr)
- *
- *
- * @brief Disable PHY Loopback in a specific Eth MII port
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *   
- * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
- *
- * @return IX_STATUS
- * - IX_SUCCESS
- * - IX_FAIL : invalid arguments.
- * <hr>
- */
-PUBLIC IX_STATUS
-ixEthMiiPhyLoopbackDisable (UINT32 phyAddr);
-
-/**
- * @ingroup IxEthMii
- *
- * @fn ixEthMiiPhyReset(UINT32 phyAddr)
- *
- * @brief Reset a PHY
- *   Reset a PHY
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
- *   
- * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
- *
- * @return IX_STATUS
- * - IX_SUCCESS
- * - IX_FAIL : invalid arguments.
- *
- * <hr>
- */
-PUBLIC IX_STATUS ixEthMiiPhyReset(UINT32 phyAddr);
-
-
-/**
- * @ingroup IxEthMii
- *
- * @fn ixEthMiiLinkStatus(UINT32 phyAddr, 
-			  BOOL *linkUp,
-			  BOOL *speed100, 
-			  BOOL *fullDuplex,
-		          BOOL *autoneg)
- *
- * @brief Retrieve the current status of a PHY
- *   Retrieve the link, speed, duplex and autonegotiation status of a PHY
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
- *   
- * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
- * @param linkUp BOOL [out] - set to true if the link is up
- * @param speed100 BOOL [out] - set to true indicates 100Mbit/s, false indicates 10Mbit/s
- * @param fullDuplex BOOL [out] - set to true indicates Full Duplex, false indicates Half Duplex
- * @param autoneg BOOL [out] - set to true indicates autonegotiation is enabled, false indicates autonegotiation is disabled
- *
- * @return IX_STATUS
- * - IX_SUCCESS
- * - IX_FAIL : invalid arguments.
- *
- * <hr>
- */
-PUBLIC IX_STATUS ixEthMiiLinkStatus(UINT32 phyAddr, 
-				     BOOL *linkUp,
-				     BOOL *speed100, 
-				     BOOL *fullDuplex,
-				     BOOL *autoneg);
-
-/**
- * @ingroup IxEthMii
- *
- * @fn ixEthMiiPhyShow (UINT32 phyAddr)
- *
- *
- * @brief Display information on a specified PHY
- *   Display link status, speed, duplex and Auto Negotiation status
- *
- * - Reentrant    - no
- * - ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
- *   
- * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
- *
- * @return IX_STATUS
- * - IX_SUCCESS
- * - IX_FAIL : invalid arguments.
- *
- * <hr>
- */
-PUBLIC IX_STATUS ixEthMiiPhyShow (UINT32 phyAddr);
-
-#endif /* ndef IxEthMii_H */
-/**
- *@}
- */
diff --git a/drivers/net/npe/include/IxEthMii_p.h b/drivers/net/npe/include/IxEthMii_p.h
deleted file mode 100644
index 0c48a69..0000000
--- a/drivers/net/npe/include/IxEthMii_p.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/**
- * @file IxEthMii_p.h
- *
- * @author Intel Corporation
- * @date 
- *
- * @brief  MII Header file
- *
- * Design Notes:
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxEthMii_p_H
-#define IxEthMii_p_H
-
-
-/* MII definitions - these have been verified against the LXT971 and
- LXT972 PHYs*/
-
-#define IX_ETH_MII_MAX_REG_NUM  0x20  /* max number of registers */
-
-#define IX_ETH_MII_CTRL_REG     0x0	/* Control Register */
-#define IX_ETH_MII_STAT_REG	0x1	/* Status Register */
-#define IX_ETH_MII_PHY_ID1_REG  0x2	/* PHY identifier 1 Register */
-#define IX_ETH_MII_PHY_ID2_REG  0x3	/* PHY identifier 2 Register */
-#define IX_ETH_MII_AN_ADS_REG   0x4	/* Auto-Negotiation 	  */
-					/* Advertisement Register */
-#define IX_ETH_MII_AN_PRTN_REG  0x5	/* Auto-Negotiation 	    */
-					/* partner ability Register */
-#define IX_ETH_MII_AN_EXP_REG   0x6	/* Auto-Negotiation   */
-					/* Expansion Register */
-#define IX_ETH_MII_AN_NEXT_REG  0x7	/* Auto-Negotiation 	       */
-					/* next-page transmit Register */
-
-#define IX_ETH_MII_STAT2_REG    0x11    /* Status Register 2*/
-
-
-/* MII control register bit  */
-
-#define IX_ETH_MII_CR_COLL_TEST  0x0080  /* collision test */
-#define IX_ETH_MII_CR_FDX	 0x0100  /* FDX =1, half duplex =0 */
-#define IX_ETH_MII_CR_RESTART    0x0200  /* restart auto negotiation */
-#define IX_ETH_MII_CR_ISOLATE    0x0400  /* isolate PHY from MII */
-#define IX_ETH_MII_CR_POWER_DOWN 0x0800  /* power down */
-#define IX_ETH_MII_CR_AUTO_EN    0x1000  /* auto-negotiation enable */
-#define IX_ETH_MII_CR_100	 0x2000  /* 0 = 10mb, 1 = 100mb */
-#define IX_ETH_MII_CR_LOOPBACK   0x4000  /* 0 = normal, 1 = loopback */
-#define IX_ETH_MII_CR_RESET	 0x8000  /* 0 = normal, 1 = PHY reset */
-#define IX_ETH_MII_CR_NORM_EN    0x0000  /* just enable the PHY */
-#define IX_ETH_MII_CR_DEF_0_MASK 0xca7f  /* they must return zero */
-#define IX_ETH_MII_CR_RES_MASK   0x007f  /* reserved bits, return zero */
-
-/* MII Status register bit definitions */
-
-#define IX_ETH_MII_SR_LINK_STATUS   0x0004 /* link Status -- 1 = link */
-#define IX_ETH_MII_SR_AUTO_SEL      0x0008 /* auto speed select capable */
-#define IX_ETH_MII_SR_REMOTE_FAULT  0x0010 /* Remote fault detect */
-#define IX_ETH_MII_SR_AUTO_NEG      0x0020 /* auto negotiation complete */
-#define IX_ETH_MII_SR_10T_HALF_DPX  0x0800 /* 10BaseT HD capable */
-#define IX_ETH_MII_SR_10T_FULL_DPX  0x1000 /* 10BaseT FD capable */
-#define IX_ETH_MII_SR_TX_HALF_DPX   0x2000 /* TX HD capable */
-#define IX_ETH_MII_SR_TX_FULL_DPX   0x4000 /* TX FD capable */
-#define IX_ETH_MII_SR_T4            0x8000 /* T4 capable */
-#define IX_ETH_MII_SR_ABIL_MASK     0xff80 /* abilities mask */
-#define IX_ETH_MII_SR_EXT_CAP       0x0001 /* extended capabilities */
-
-
-/* LXT971/2 Status 2 register bit definitions */
-#define IX_ETH_MII_SR2_100          0x4000
-#define IX_ETH_MII_SR2_TX           0x2000
-#define IX_ETH_MII_SR2_RX           0x1000
-#define IX_ETH_MII_SR2_COL          0x0800
-#define IX_ETH_MII_SR2_LINK         0x0400
-#define IX_ETH_MII_SR2_FD           0x0200
-#define IX_ETH_MII_SR2_AUTO         0x0100
-#define IX_ETH_MII_SR2_AUTO_CMPLT   0x0080
-#define IX_ETH_MII_SR2_POLARITY     0x0020
-#define IX_ETH_MII_SR2_PAUSE        0x0010
-#define IX_ETH_MII_SR2_ERROR        0x0008
-
-/* MII Link Code word  bit definitions */
-
-#define IX_ETH_MII_BP_FAULT	0x2000       	/* remote fault */
-#define IX_ETH_MII_BP_ACK	0x4000       	/* acknowledge */
-#define IX_ETH_MII_BP_NP	0x8000       	/* nexp page is supported */
-
-/* MII Next Page bit definitions */
-
-#define IX_ETH_MII_NP_TOGGLE 0x0800       	/* toggle bit */
-#define IX_ETH_MII_NP_ACK2	 0x1000       	/* acknowledge two */
-#define IX_ETH_MII_NP_MSG	 0x2000       	/* message page */
-#define IX_ETH_MII_NP_ACK1	 0x4000       	/* acknowledge one */
-#define IX_ETH_MII_NP_NP	 0x8000       	/* nexp page will follow */
-
-/* MII Expansion Register bit definitions */
-
-#define IX_ETH_MII_EXP_FAULT    0x0010  /* parallel detection fault */
-#define IX_ETH_MII_EXP_PRTN_NP  0x0008  /* link partner next-page able */
-#define IX_ETH_MII_EXP_LOC_NP   0x0004  /* local PHY next-page able */
-#define IX_ETH_MII_EXP_PR	    0x0002  /* full page received */
-#define IX_ETH_MII_EXP_PRT_AN   0x0001  /* link partner auto neg able */
-
-/* technology ability field bit definitions */
-
-#define IX_ETH_MII_TECH_10BASE_T	  0x0020  /* 10Base-T */
-#define IX_ETH_MII_TECH_10BASE_FD	  0x0040  /* 10Base-T Full Duplex */
-#define IX_ETH_MII_TECH_100BASE_TX	  0x0080  /* 100Base-TX */
-#define IX_ETH_MII_TECH_100BASE_TX_FD 0x0100  /* 100Base-TX Full Duplex */
-
-#define IX_ETH_MII_TECH_100BASE_T4	0x0200	/* 100Base-T4 */
-#define IX_ETH_MII_ADS_TECH_MASK	0x1fe0	/* technology abilities mask */
-#define IX_ETH_MII_TECH_MASK	IX_ETH_MII_ADS_TECH_MASK
-#define IX_ETH_MII_ADS_SEL_MASK	0x001f	/* selector field mask */
-
-#define IX_ETH_MII_AN_FAIL     0x10    /* auto-negotiation fail */
-#define IX_ETH_MII_STAT_FAIL   0x20    /* errors in the status register */
-#define IX_ETH_MII_PHY_NO_ABLE 0x40    /* the PHY lacks some abilities */
-
-/* Definitions for MII access routines*/
-
-#define IX_ETH_MII_GO                  BIT(31)
-#define IX_ETH_MII_WRITE               BIT(26)
-#define IX_ETH_MII_TIMEOUT_10TH_SECS       (5)    
-#define IX_ETH_MII_10TH_SEC_IN_MILLIS    (100)              
-#define IX_ETH_MII_READ_FAIL           BIT(31)
-
-/* When we reset the PHY we delay for 2 seconds to allow the reset to 
-   complete*/
-#define IX_ETH_MII_RESET_DELAY_MS  (2000)     
-#define IX_ETH_MII_RESET_POLL_MS     (50)
-
-#define IX_ETH_MII_REG_SHL    16
-#define IX_ETH_MII_ADDR_SHL   21
-
-/* supported PHYs */
-#define IX_ETH_MII_LXT971_PHY_ID	0x001378E0
-#define IX_ETH_MII_LXT972_PHY_ID	0x001378E2
-#define IX_ETH_MII_LXT973_PHY_ID	0x00137A10
-#define IX_ETH_MII_LXT973A3_PHY_ID	0x00137A11
-#define IX_ETH_MII_KS8995_PHY_ID	0x00221450
-#define IX_ETH_MII_LXT9785_PHY_ID	0x001378FF	
-
-
-#define IX_ETH_MII_INVALID_PHY_ID 0x00000000
-#define IX_ETH_MII_UNKNOWN_PHY_ID 0xffffffff
-
-#endif  /*IxEthAccMii_p_H*/
diff --git a/drivers/net/npe/include/IxEthNpe.h b/drivers/net/npe/include/IxEthNpe.h
deleted file mode 100644
index 20bfa76..0000000
--- a/drivers/net/npe/include/IxEthNpe.h
+++ /dev/null
@@ -1,671 +0,0 @@
-#ifndef __doxygen_HIDE  /* This file is not part of the API */
-
-/**
- * @file IxEthNpe.h
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxEthNpe IXP400 Ethernet NPE (IxEthNpe) API
- *
- * @brief Contains the API for Ethernet NPE.
- * 
- * All messages given to NPE, get back an acknowledgment. The acknowledgment 
- * is identical to the message sent to the NPE (except for NPE_GETSTATUS message).
- *
- * @{
- */
-
-
-/*--------------------------------------------------------------------------
- * APB Message IDs - XScale->NPE
- *------------------------------------------------------------------------*/
-
-/**
- * @def IX_ETHNPE_NPE_GETSTATUS
- *
- * @brief Request from the XScale client for the NPE to return the firmware
- * version of the currently executing image.
- *
- * Acknowledgment message id is same as the request message id. 
- * NPE returns the firmware version ID to XScale.
- */
-#define IX_ETHNPE_NPE_GETSTATUS                 0x00
-
-/**
- * @def IX_ETHNPE_EDB_SETPORTADDRESS
- *
- * @brief Request from the XScale client for the NPE to set the Ethernet 
- * port's port ID and MAC address. 
- */
-#define IX_ETHNPE_EDB_SETPORTADDRESS            0x01
-
-/**
- * @def IX_ETHNPE_EDB_GETMACADDRESSDATABASE
- *
- * @brief Request from XScale client to the NPE requesting upload of 
- * Ethernet Filtering Database or Header Conversion Database from NPE's 
- * data memory to XScale accessible SDRAM.
- */
-#define IX_ETHNPE_EDB_GETMACADDRESSDATABASE     0x02
-
-/**
- * @def IX_ETHNPE_EDB_SETMACADDRESSSDATABASE
- *
- * @brief Request from XScale client to the NPE requesting download of 
- * Ethernet Filtering Database or Header Conversion Database from SDRAM
- * to the NPE's datamemory.
- */
-#define IX_ETHNPE_EDB_SETMACADDRESSSDATABASE    0x03
-
-/**
- * @def IX_ETHNPE_GETSTATS
- *
- * @brief Request from the XScale client for the current MAC port statistics 
- * data to be written to the (empty) statistics structure and the specified
- * location in externa memory.
- */
-#define IX_ETHNPE_GETSTATS                      0x04
-
-/**
- * @def IX_ETHNPE_RESETSTATS
- *
- * @brief Request from the XScale client to the NPE to reset all of its internal 
- * MAC port statistics state variables. 
- *
- * As a side effect, this message entails an implicit request that the NPE
- *  write the current MAC port statistics into the MAC statistics structure 
- * at the specified location in external memory.
- */
-#define IX_ETHNPE_RESETSTATS                    0x05
-
-/**
- * @def IX_ETHNPE_SETMAXFRAMELENGTHS
- *
- * @brief Request from the XScale client to the NPE to configure maximum framelengths
- * and block sizes in receive and transmit direction.
- */
-#define IX_ETHNPE_SETMAXFRAMELENGTHS            0x06
-
-/**
- * @def IX_ETHNPE_VLAN_SETRXTAGMODE
- *
- * @brief Request from the XScale client to the NPE to configure VLAN frame type
- * filtering and VLAN the tagging mode for the receiver.
- */
-#define IX_ETHNPE_VLAN_SETRXTAGMODE             0x07
-
-/**
- * @def IX_ETHNPE_VLAN_SETDEFAULTRXVID
- *
- * @brief Request from the XScale client to the NPE to set receiver's default 
- * VLAN tag (PVID)and internal traffic class.
- */
-#define IX_ETHNPE_VLAN_SETDEFAULTRXVID          0x08
-
-/**
- * @def IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY
- *
- * @brief Request from the XScale client to the NPE to configure VLAN Port 
- * membership and Tx tagging for 8 consecutive VLANID's.
- */
-#define IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY    0x09
-
-/**
- * @def IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE
- *
- * @brief Request from the XScale client to the NPE to configure VLAN Port
- * membership and Tx tagging for a range of VLANID's.
- */
-#define IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE    0x0A
-
-/**
- * @def IX_ETHNPE_VLAN_SETRXQOSENTRY
- *
- * @brief Request from the XScale client to the NPE to map a user priority
- * to QoS class and an AQM queue number.
- */
-#define IX_ETHNPE_VLAN_SETRXQOSENTRY            0x0B
-
-/**
- * @def IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE
- *
- * @brief Request from the XScale client to the NPE to enable or disable
- * portID extraction from VLAN-tagged frames for the specified port.
- */
-#define IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE  0x0C
-
-/**
- * @def IX_ETHNPE_STP_SETBLOCKINGSTATE
- *
- * @brief Request from the XScale client to the NPE to block or unblock
- * forwarding for spanning tree BPDUs.
- */
-#define IX_ETHNPE_STP_SETBLOCKINGSTATE          0x0D
-
-/**
- * @def IX_ETHNPE_FW_SETFIREWALLMODE
- *
- * @brief Request from the XScale client to the NPE to configure firewall
- * services modes of operation and/or download Ethernet Firewall Database from
- * SDRAM to NPE.
- */
-#define IX_ETHNPE_FW_SETFIREWALLMODE            0x0E
-
-/**
- * @def IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID 
- *
- * @brief Request from the XScale client to the NPE to set global frame control
- * and duration/ID field for the 802.3 to 802.11 protocol header conversion
- * service.
- */
-#define IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID  0x0F
-
-/**
- * @def IX_ETHNPE_PC_SETBBSID
- *
- * @brief Request from the XScale client to the NPE to set global BBSID field
- * value for the 802.3 to 802.11 protocol header conversion service. 
- */
-#define IX_ETHNPE_PC_SETBBSID                   0x10
-
-/**
- * @def IX_ETHNPE_PC_SETAPMACTABLE
- *
- * @brief Request from the XScale client to the NPE to update a block/section/
- * range of the AP MAC Address Table.
- */
-#define IX_ETHNPE_PC_SETAPMACTABLE              0x11
-
-/**
- * @def IX_ETHNPE_SETLOOPBACK_MODE
- *
- * @brief Turn on or off the NPE frame loopback.
- */
-#define IX_ETHNPE_SETLOOPBACK_MODE              (0x12)
-
-/*--------------------------------------------------------------------------
- * APB Message IDs - NPE->XScale
- *------------------------------------------------------------------------*/
-
-/**
- * @def IX_ETHNPE_NPE_GETSTATUS_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_NPE_GETSTATUS message. NPE firmware version 
- * id is returned in the message.
- */
-#define IX_ETHNPE_NPE_GETSTATUS_ACK                 0x00
-
-/**
- * @def IX_ETHNPE_EDB_SETPORTADDRESS_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_EDB_SETPORTADDRESS message.
- */
-#define IX_ETHNPE_EDB_SETPORTADDRESS_ACK            0x01
-
-/**
- * @def IX_ETHNPE_EDB_GETMACADDRESSDATABASE_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_EDB_GETMACADDRESSDATABASE message
- */
-#define IX_ETHNPE_EDB_GETMACADDRESSDATABASE_ACK     0x02
-
-/**
- * @def IX_ETHNPE_EDB_SETMACADDRESSSDATABASE_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_EDB_SETMACADDRESSSDATABASE message.
- */
-#define IX_ETHNPE_EDB_SETMACADDRESSSDATABASE_ACK    0x03
-
-/**
- * @def IX_ETHNPE_GETSTATS_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_GETSTATS message.
- */
-#define IX_ETHNPE_GETSTATS_ACK                      0x04
-
-/**
- * @def IX_ETHNPE_RESETSTATS_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_RESETSTATS message.
- */
-#define IX_ETHNPE_RESETSTATS_ACK                    0x05
-
-/**
- * @def IX_ETHNPE_SETMAXFRAMELENGTHS_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_SETMAXFRAMELENGTHS message.
- */
-#define IX_ETHNPE_SETMAXFRAMELENGTHS_ACK            0x06
-
-/**
- * @def IX_ETHNPE_VLAN_SETRXTAGMODE_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_VLAN_SETRXTAGMODE message.
- */
-#define IX_ETHNPE_VLAN_SETRXTAGMODE_ACK             0x07
-
-/**
- * @def IX_ETHNPE_VLAN_SETDEFAULTRXVID_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_VLAN_SETDEFAULTRXVID  message.
- */
-#define IX_ETHNPE_VLAN_SETDEFAULTRXVID_ACK          0x08
-
-/**
- * @def IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY message.
- */
-#define IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY_ACK    0x09
-
-/**
- * @def IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE message.
- */
-#define IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE_ACK    0x0A
-
-/**
- * @def IX_ETHNPE_VLAN_SETRXQOSENTRY_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_VLAN_SETRXQOSENTRY message.
- */
-#define IX_ETHNPE_VLAN_SETRXQOSENTRY_ACK            0x0B
-
-/**
- * @def IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE message.
- */
-#define IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE_ACK  0x0C
-
-/**
- * @def IX_ETHNPE_STP_SETBLOCKINGSTATE_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_STP_SETBLOCKINGSTATE message.
- */
-#define IX_ETHNPE_STP_SETBLOCKINGSTATE_ACK          0x0D
-
-/**
- * @def IX_ETHNPE_FW_SETFIREWALLMODE_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_FW_SETFIREWALLMODE message. 
- */
-#define IX_ETHNPE_FW_SETFIREWALLMODE_ACK            0x0E
-
-/**
- * @def IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID message.
- */
-#define IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID_ACK  0x0F
-
-/**
- * @def IX_ETHNPE_PC_SETBBSID_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_PC_SETBBSID message.
- */
-#define IX_ETHNPE_PC_SETBBSID_ACK                   0x10
-
-/**
- * @def IX_ETHNPE_PC_SETAPMACTABLE_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_PC_SETAPMACTABLE message.
- */
-#define IX_ETHNPE_PC_SETAPMACTABLE_ACK              0x11
-
-/**
- * @def IX_ETHNPE_SETLOOPBACK_MODE_ACK
- *
- * @brief Acknowledgment to IX_ETHNPE_SETLOOPBACK_MODE message.
- */
-#define IX_ETHNPE_SETLOOPBACK_MODE_ACK              (0x12)
-
-/*--------------------------------------------------------------------------
- * Queue Manager Queue entry bit field boundary definitions
- *------------------------------------------------------------------------*/
-
-/**
- * @def MASK(hi,lo)
- *
- * @brief Macro for mask
- */
-#define MASK(hi,lo)                    (((1 << (1 + ((hi) - (lo)))) - 1) << (lo))
-
-/**
- * @def BITS(x,hi,lo)
- *
- * @brief Macro for bits
- */
-#define BITS(x,hi,lo)                  (((x) & MASK(hi,lo)) >> (lo))
-
-/**
- * @def IX_ETHNPE_QM_Q_RXENET_LENGTH_MASK
- *
- * @brief QMgr Queue LENGTH field mask
- */
-#define IX_ETHNPE_QM_Q_RXENET_LENGTH_MASK   0x3fff
-
-/**
- * @def IX_ETHNPE_QM_Q_FIELD_FLAG_R
- *
- * @brief QMgr Queue FLAG field right boundary
- */
-#define IX_ETHNPE_QM_Q_FIELD_FLAG_R             20
-
-/**
- * @def IX_ETHNPE_QM_Q_FIELD_FLAG_MASK
- *
- * @brief QMgr Queue FLAG field mask
- *
- * Multicast bit : BIT(4)
- * Broadcast bit : BIT(5)
- * IP bit        : BIT(6) (linux only)
- *
- */
-#ifdef __vxworks
-#define IX_ETHNPE_QM_Q_FIELD_FLAG_MASK           0x30
-#else
-#define IX_ETHNPE_QM_Q_FIELD_FLAG_MASK           0x70
-#endif
-
-
-/**
- * @def IX_ETHNPE_QM_Q_FIELD_NPEID_L
- *
- * @brief QMgr Queue NPE ID field left boundary
- */
-#define IX_ETHNPE_QM_Q_FIELD_NPEID_L            1
-
-/**
- * @def IX_ETHNPE_QM_Q_FIELD_NPEID_R
- *
- * @brief QMgr Queue NPE ID field right boundary
- */
-#define IX_ETHNPE_QM_Q_FIELD_NPEID_R            0
-
-/**
- * @def IX_ETHNPE_QM_Q_FIELD_PRIOR_L
- *
- * @brief QMgr Queue Priority field left boundary
- */
-#define IX_ETHNPE_QM_Q_FIELD_PRIOR_L            2
-
-/**
- * @def IX_ETHNPE_QM_Q_FIELD_PRIOR_R
- *
- * @brief QMgr Queue Priority field right boundary
- */
-#define IX_ETHNPE_QM_Q_FIELD_PRIOR_R            0
-
-/**
- * @def IX_ETHNPE_QM_Q_FIELD_ADDR_L 
- *
- * @brief QMgr Queue Address field left boundary
- */
-#define IX_ETHNPE_QM_Q_FIELD_ADDR_L             31
-
-/**
- * @def IX_ETHNPE_QM_Q_FIELD_ADDR_R
- *
- * @brief QMgr Queue Address field right boundary
- */
-#define IX_ETHNPE_QM_Q_FIELD_ADDR_R              5
-
-/*--------------------------------------------------------------------------
- * Queue Manager Queue entry bit field masks
- *------------------------------------------------------------------------*/
-
-/**
- * @def IX_ETHNPE_QM_Q_FREEENET_ADDR_MASK 
- *
- * @brief Macro to mask the Address field of the FreeEnet Queue Manager Entry
- */
-#define IX_ETHNPE_QM_Q_FREEENET_ADDR_MASK \
-            MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \
-                  IX_ETHNPE_QM_Q_FIELD_ADDR_R)
-
-/**
- * @def IX_ETHNPE_QM_Q_RXENET_NPEID_MASK  
- *
- * @brief Macro to mask the NPE ID field of the RxEnet Queue Manager Entry
- */
-#define IX_ETHNPE_QM_Q_RXENET_NPEID_MASK \
-            MASK (IX_ETHNPE_QM_Q_FIELD_NPEID_L, \
-                  IX_ETHNPE_QM_Q_FIELD_NPEID_R)
-
-/**
- * @def IX_ETHNPE_QM_Q_RXENET_ADDR_MASK 
- *
- * @brief Macro to mask the Mbuf Address field of the RxEnet Queue Manager Entry
- */
-#define IX_ETHNPE_QM_Q_RXENET_ADDR_MASK \
-            MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \
-                  IX_ETHNPE_QM_Q_FIELD_ADDR_R)
-
-/**
- * @def IX_ETHNPE_QM_Q_TXENET_PRIOR_MASK
- *
- * @brief Macro to mask the Priority field of the TxEnet Queue Manager Entry
- */
-#define IX_ETHNPE_QM_Q_TXENET_PRIOR_MASK \
-            MASK (IX_ETHNPE_QM_Q_FIELD_PRIOR_L, \
-                  IX_ETHNPE_QM_Q_FIELD_PRIOR_R)
-
-/**
- * @def IX_ETHNPE_QM_Q_TXENET_ADDR_MASK 
- *
- * @brief Macro to mask the Mbuf Address field of the TxEnet Queue Manager Entry
- */
-#define IX_ETHNPE_QM_Q_TXENET_ADDR_MASK \
-            MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \
-                  IX_ETHNPE_QM_Q_FIELD_ADDR_R)
-
-/**
- * @def IX_ETHNPE_QM_Q_TXENETDONE_NPEID_MASK 
- *
- * @brief Macro to mask the NPE ID field of the TxEnetDone Queue Manager Entry
- */
-#define IX_ETHNPE_QM_Q_TXENETDONE_NPEID_MASK \
-            MASK (IX_ETHNPE_QM_Q_FIELD_NPEID_L, \
-                  IX_ETHNPE_QM_Q_FIELD_NPEID_R)
-
-/**
- * @def IX_ETHNPE_QM_Q_TXENETDONE_ADDR_MASK 
- * 
- * @brief Macro to mask the Mbuf Address field of the TxEnetDone Queue Manager 
- * Entry
- */
-#define IX_ETHNPE_QM_Q_TXENETDONE_ADDR_MASK \
-            MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \
-                  IX_ETHNPE_QM_Q_FIELD_ADDR_R)
-
-/*--------------------------------------------------------------------------
- * Queue Manager Queue entry bit field value extraction macros
- *------------------------------------------------------------------------*/
-
-/**
- * @def IX_ETHNPE_QM_Q_FREEENET_ADDR_VAL(x)
- *
- * @brief Extraction macro for Address field of FreeNet Queue Manager Entry 
- *
- * Pointer to an mbuf buffer descriptor
- */
-#define IX_ETHNPE_QM_Q_FREEENET_ADDR_VAL(x) \
-            ((x) & IX_ETHNPE_QM_Q_FREEENET_ADDR_MASK)
-
-/**
- * @def IX_ETHNPE_QM_Q_RXENET_NPEID_VAL(x)
- *
- * @brief Extraction macro for NPE ID field of RxEnet Queue Manager Entry 
- *
- * Set to 0 for entries originating from the Eth0 NPE; 
- * Set to 1 for entries originating from the Eth1 NPE.
- */
-#define IX_ETHNPE_QM_Q_RXENET_NPEID_VAL(x) \
-            BITS (x, IX_ETHNPE_QM_Q_FIELD_NPEID_L, \
-                     IX_ETHNPE_QM_Q_FIELD_NPEID_R)
-
-/**
- * @def IX_ETHNPE_QM_Q_RXENET_PORTID_VAL(x)
- *
- * @brief Extraction macro for Port ID field of RxEnet Queue Manager Entry 
- *
- * 0-5: Assignable (by the XScale client) to any of the physical ports.
- * 6: It is reserved
- * 7: Indication that the NPE did not find the associated frame's destination MAC address within 
- * its internal filtering database.
- */
-#define IX_ETHNPE_QM_Q_RXENET_PORTID_VAL(x) \
-            BITS (x, IX_ETHNPE_QM_Q_FIELD_PORTID_L, \
-                     IX_ETHNPE_QM_Q_Field_PortID_R)
-
-/**
- * @def IX_ETHNPE_QM_Q_RXENET_ADDR_VAL(x)
- *
- * @brief Extraction macro for Address field of RxEnet Queue Manager Entry
- *
- * Pointer to an mbuf buffer descriptor
- */
-#define IX_ETHNPE_QM_Q_RXENET_ADDR_VAL(x) \
-            ((x) & IX_ETHNPE_QM_Q_RXENET_ADDR_MASK)
-
-/**
- * @def IX_ETHNPE_QM_Q_TXENET_PRIOR_VAL(x)
- *
- * @brief Extraction macro for Priority field of TxEnet Queue Manager Entry
- *
- * Priority of the packet (as described in IEEE 802.1D). This field is
- * cleared upon return from the Ethernet NPE to the TxEnetDone queue.
- */
-#define IX_ETHNPE_QM_Q_TXENET_PRIOR_VAL(x) \
-            BITS (x, IX_ETHNPE_QM_Q_FIELD_PRIOR_L, \
-                     IX_ETHNPE_QM_Q_FIELD_PRIOR_R)
-
-/**
- * @def IX_ETHNPE_QM_Q_TXENET_ADDR_VAL(x)
- *
- * @brief Extraction macro for Address field of Queue Manager TxEnet Queue 
- * Manager Entry
- *
- * Pointer to an mbuf buffer descriptor
- */
-#define IX_ETHNPE_QM_Q_TXENET_ADDR_VAL(x) \
-            ((x) & IX_ETHNPE_QM_Q_TXENET_ADDR_MASK)
-
-/**
- * @def IX_ETHNPE_QM_Q_TXENETDONE_NPEID_VAL(x)
- *
- * @brief Extraction macro for NPE ID field of TxEnetDone Queue Manager Entry
- *
- * Set to 0 for entries originating from the Eth0 NPE; set to 1 for en-tries 
- * originating from the Eth1 NPE.
- */
-#define IX_ETHNPE_QM_Q_TXENETDONE_NPEID_VAL(x) \
-            BITS (x, IX_ETHNPE_QM_Q_FIELD_NPEID_L, \
-                     IX_ETHNPE_QM_Q_FIELD_NPEID_R)
-
-/**
- * @def IX_ETHNPE_QM_Q_TXENETDONE_ADDR_VAL(x)
- *
- * @brief Extraction macro for Address field of TxEnetDone Queue Manager Entry
- *
- * Pointer to an mbuf buffer descriptor
- */
-#define IX_ETHNPE_QM_Q_TXENETDONE_ADDR_VAL(x) \
-            ((x) & IX_ETHNPE_QM_Q_TXENETDONE_ADDR_MASK)
-
-
-/*--------------------------------------------------------------------------
- * NPE limits
- *------------------------------------------------------------------------*/
-
-/**
- * @def IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN
- * 
- * @brief Macro to check the minimum length of a rx free buffer
- */
-#define IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN (64)
-
-/**
- * @def IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MASK
- * 
- * @brief Mask to apply to the mbuf length before submitting it to the NPE
- * (the NPE handles only rx free mbufs which are multiple of 64)
- * 
- * @sa IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MASK
- */
-#define IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MASK (~63)
-
-/**
- * @def IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_UP(size)
- * 
- * @brief  Round up to get the size necessary to receive without chaining
- * the frames which are (size) bytes (the NPE operates by multiple of 64)
- * e.g. To receive 1514 bytes frames, the size of the buffers in replenish
- * has to be at least (1514+63)&(~63) = 1536 bytes.
- *
- */
-#define IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_UP(size) (((size) + 63) & ~63)
-
-/**
- * @def IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_DOWN(size)
- *
- * @brief Round down to apply to the mbuf length before submitting
- * it to the NPE. (the NPE operates by multiple of 64)
- *
- */
-#define IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_DOWN(size) ((size) & ~63)
-
-/**
- * @def IX_ETHNPE_ACC_FRAME_LENGTH_MAX
- * 
- * @brief maximum mbuf length supported by the NPE
- * 
- * @sa IX_ETHNPE_ACC_FRAME_LENGTH_MAX
- */
-#define IX_ETHNPE_ACC_FRAME_LENGTH_MAX (16320)
-
-/**
- * @def IX_ETHNPE_ACC_FRAME_LENGTH_DEFAULT
- * 
- * @brief default mbuf length supported by the NPE
- * 
- * @sa IX_ETHNPE_ACC_FRAME_LENGTH_DEFAULT
- */
-#define IX_ETHNPE_ACC_FRAME_LENGTH_DEFAULT (1522)
-
-/**
- * @def IX_ETHNPE_ACC_LENGTH_OFFSET
- *
- * @brief Offset of the cluster length field in the word shared with the NPEs
- */
-#define IX_ETHNPE_ACC_LENGTH_OFFSET 16
-
-/**
- * @def IX_ETHNPE_ACC_PKTLENGTH_MASK
- *
- * @brief Mask of the cluster length field in the word shared with the NPEs
- */
-#define IX_ETHNPE_ACC_PKTLENGTH_MASK 0x3fff
-
-
-/**
- *@}
- */
-
-#endif /* __doxygen_HIDE */
diff --git a/drivers/net/npe/include/IxFeatureCtrl.h b/drivers/net/npe/include/IxFeatureCtrl.h
deleted file mode 100644
index 987b00b..0000000
--- a/drivers/net/npe/include/IxFeatureCtrl.h
+++ /dev/null
@@ -1,718 +0,0 @@
-/**
- * @file IxFeatureCtrl.h
- *
- * @date 30-Jan-2003
-
- * @brief This file contains the public API of the IXP400 Feature Control
- *        component.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-/* ------------------------------------------------------
-   Doxygen group definitions
-   ------------------------------------------------------ */
-/**
- * @defgroup IxFeatureCtrlAPI IXP400 Feature Control (IxFeatureCtrl) API
- *
- * @brief The Public API for the IXP400 Feature Control.
- * 
- * @{
- */
-
-#ifndef IXFEATURECTRL_H
-#define IXFEATURECTRL_H
-
-/*
- * User defined include files
- */
-#include "IxOsal.h"
-
-/*
- * #defines and macros
- */
-
-/*************************************************************
- * The following are IxFeatureCtrlComponentCheck return values.
- ************************************************************/
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def  IX_FEATURE_CTRL_COMPONENT_DISABLED
- *
- * @brief Hardware Component is disabled/unavailable.
- *        Return status by ixFeatureCtrlComponentCheck()  
- */
-#define  IX_FEATURE_CTRL_COMPONENT_DISABLED 0
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def  IX_FEATURE_CTRL_COMPONENT_ENABLED
- *
- * @brief Hardware Component is available. 
- *        Return status by ixFeatureCtrlComponentCheck()  
- */
-#define  IX_FEATURE_CTRL_COMPONENT_ENABLED  1
-
-/***********************************************************************************
- * Product ID in XScale CP15 - Register 0
- *  - It contains information on the maximum XScale Core Frequency and
- *    Silicon Stepping.  
- *  - XScale Core Frequency Id indicates only the maximum XScale frequency
- *    achievable and not the running XScale frequency (maybe stepped down).    
- *  - The register is read by using ixFeatureCtrlProductIdRead.
- *  - Usage example: 
- *          productId = ixFeatureCtrlProductIdRead();
- *          if( (productId & IX_FEATURE_CTRL_SILICON_STEPPING_MASK) == 
- *              IX_FEATURE_CTRL_SILICON_TYPE_A0 )
- *          if( (productId & IX_FEATURE_CTRL_XSCALE_FREQ_MASK) == 
- *              IX_FEATURE_CTRL_XSCALE_FREQ_533 )    
- * 
- *  31 28 27 24 23 20 19 16 15 12 11        9 8                   4 3              0  
- *  -------------------------------------------------------------------------------- 
- * | 0x6 | 0x9 | 0x0 | 0x5 | 0x4 | Device ID | XScale Core Freq Id | Si Stepping Id |    
- *  --------------------------------------------------------------------------------
- *
- *   Maximum Achievable XScale Core Frequency Id :  533MHz  - 0x1C 
- *                                                  400MHz  - 0x1D 
- *                                                  266MHz  - 0x1F
- *
- *   <b>THE CORE FREQUENCY ID IS NOT APPLICABLE TO IXP46X <\b>
- *  
- *   The above is applicable to IXP42X only. CP15 in IXP46X does not contain any
- *   Frequency ID. 
- * 
- *  Si Stepping Id            :  A       - 0x0    
- *                               B       - 0x1 
- *  
- *  XScale Core freq Id - Device ID [11:9] : IXP42X - 0x0
- *                                           IXP46X - 0x1
- *************************************************************************************/
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURE_CTRL_SILICON_TYPE_A0
- *
- * @brief This is the value of A0 Silicon in product ID. 
- */
-#define IX_FEATURE_CTRL_SILICON_TYPE_A0   0
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURE_CTRL_SILICON_TYPE_B0
- *
- * @brief This is the value of B0 Silicon in product ID.
- */
-#define IX_FEATURE_CTRL_SILICON_TYPE_B0   1
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURE_CTRL_SILICON_STEPPING_MASK
- *
- * @brief This is the mask of silicon stepping in product ID. 
- */
-#define IX_FEATURE_CTRL_SILICON_STEPPING_MASK  0xF 
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_DEVICE_TYPE_MASK
- *
- * @brief This is the mask of silicon stepping in product ID.
- */
-#define IX_FEATURE_CTRL_DEVICE_TYPE_MASK  (0x7) 
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET
- *
- * @brief This is the mask of silicon stepping in product ID.
- */
-#define IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET  9
-
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURE_CTRL_XSCALE_FREQ_533
- *
- * @brief This is the value of 533MHz XScale Core in product ID.
- */
-#define IX_FEATURE_CTRL_XSCALE_FREQ_533  ((0x1C)<<4)
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURE_CTRL_XSCALE_FREQ_400
- *
- * @brief This is the value of 400MHz XScale Core in product ID.
- */
-#define IX_FEATURE_CTRL_XSCALE_FREQ_400  ((0x1D)<<4)
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURE_CTRL_XSCALE_FREQ_266
- *
- * @brief This is the value of 266MHz XScale Core in product ID.
- */
-#define IX_FEATURE_CTRL_XSCALE_FREQ_266 ((0x1F)<<4)   
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURE_CTRL_XSCALE_FREQ_MASK
- *
- * @brief This is the mask of XScale Core in product ID.
- */
-#define IX_FEATURE_CTRL_XSCALE_FREQ_MASK ((0xFF)<<4)  
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURECTRL_REG_UTOPIA_32PHY
- *
- * @brief Maximum  UTOPIA PHY available is 32.  
- * 
- */
-#define IX_FEATURECTRL_REG_UTOPIA_32PHY  0x0
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURECTRL_REG_UTOPIA_16PHY
- *
- * @brief Maximum  UTOPIA PHY available is 16.  
- * 
- */
-#define IX_FEATURECTRL_REG_UTOPIA_16PHY  0x1
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURECTRL_REG_UTOPIA_8PHY
- *
- * @brief Maximum  UTOPIA PHY available to is 8.  
- * 
- */
-#define IX_FEATURECTRL_REG_UTOPIA_8PHY   0x2
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @def IX_FEATURECTRL_REG_UTOPIA_4PHY
- *
- * @brief Maximum  UTOPIA PHY available to is 4.  
- * 
- */
-#define IX_FEATURECTRL_REG_UTOPIA_4PHY   0x3
-
-#ifdef __ixp46X
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_XSCALE_533FREQ
- *
- * @brief Maximum  frequency available to IXP46x is 533 MHz.
- *
- */
-#define IX_FEATURECTRL_REG_XSCALE_533FREQ   0x0
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_XSCALE_667FREQ
- *
- * @brief Maximum  frequency available to IXP46x is 667 MHz.
- *
- */
-#define IX_FEATURECTRL_REG_XSCALE_667FREQ   0x1
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_XSCALE_400FREQ
- *
- * @brief Maximum  frequency available to IXP46x is 400 MHz.
- *
- */
-#define IX_FEATURECTRL_REG_XSCALE_400FREQ   0x2
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_XSCALE_266FREQ
- *
- * @brief Maximum  frequency available to IXP46x is 266 MHz.
- *
- */
-#define IX_FEATURECTRL_REG_XSCALE_266FREQ   0x3
-
-#endif /* __ixp46X */
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE
- *
- * @brief Component selected is not available for device
- *
- */
-#define IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE  0x0000
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE
- *
- * @brief Component selected is not available for device
- *
- */
-#define IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE  0xffff
-
-/**
- * @defgroup IxFeatureCtrlSwConfig Software Configuration for Access Component
- *
- * @ingroup IxFeatureCtrlAPI 
- *
- * @brief This section describes software configuration in access component. The
- *        configuration can be changed at run-time. ixFeatureCtrlSwConfigurationCheck( )
- *        will be used across applicable access component to check the configuration.
- *        ixFeatureCtrlSwConfigurationWrite( ) is used to write the software configuration.
- *
- * @note <b>All software configurations are default to be enabled.</b> 
- *
- * @{
- */
-/**
- * @ingroup IxFeatureCtrlSwConfig
- *
- * @def IX_FEATURE_CTRL_SWCONFIG_DISABLED
- *
- * @brief Software configuration is disabled. 
- * 
- */
-#define IX_FEATURE_CTRL_SWCONFIG_DISABLED 0  
-
-/**
- * @ingroup IxFeatureCtrlSwConfig
- *
- * @def IX_FEATURE_CTRL_SWCONFIG_ENABLED
- *
- * @brief Software configuration is enabled. 
- * 
- */
-#define IX_FEATURE_CTRL_SWCONFIG_ENABLED 1  
-
-/**
- * Section for enums
- **/
-
-/**
- * @ingroup IxFeatureCtrlBuildDevice
- *
- * @enum IxFeatureCtrlBuildDevice
- *
- * @brief Indicates software build type.
- *
- * Default build type is IXP42X
- *
- */
-typedef enum
-{
-    IX_FEATURE_CTRL_SW_BUILD_IXP42X = 0, /**<Build type is IXP42X */
-    IX_FEATURE_CTRL_SW_BUILD_IXP46X      /**<Build type is IXP46X */
-} IxFeatureCtrlBuildDevice;
-
-/**
- * @ingroup IxFeatureCtrlSwConfig
- *
- * @enum IxFeatureCtrlSwConfig
- *
- * @brief Enumeration for software configuration in access components.
- *
- * Entry for new run-time software configuration should be added here.
- */
-typedef enum
-{
-    IX_FEATURECTRL_ETH_LEARNING = 0,       /**< EthDB Learning Feature */
-    IX_FEATURECTRL_ORIGB0_DISPATCHER,  /**< IXP42X B0 and IXP46X dispatcher without 
-                                            livelock prevention functionality Feature */
-    IX_FEATURECTRL_SWCONFIG_MAX        /**< Maximum boudary for IxFeatureCtrlSwConfig  */
-} IxFeatureCtrlSwConfig;
-
-
-/************************************************************************
- * IXP400 Feature Control Register
- * - It contains the information (available/unavailable) of IXP425&IXP46X
- *   hardware components in their corresponding bit location.
- * - Bit value of 0 means the hardware component is available
- *   or not software disabled. Hardware component that is available
- *   can be software disabled.
- * - Bit value of 1 means the hardware is unavailable or software
- *   disabled.Hardware component that is unavailable cannot be software
- *   enabled.
- * - Use ixFeatureCtrlHwCapabilityRead() to read the hardware component's
- *   availability.
- * - Use ixFeatureCtrlRead() to get the current IXP425/IXP46X feature control
- *   register value.
- *
- *   Bit            Field Description (Hardware Component Availability)
- *   ---            ---------------------------------------------------
- *    0             RComp Circuitry
- *    1             USB Controller
- *    2             Hashing Coprocessor
- *    3             AES Coprocessor
- *    4             DES Coprocessor
- *    5             HDLC Coprocessor
- *    6             AAL Coprocessor         - Always available in IXP46X
- *    7             HSS Coprocesspr
- *    8             Utopia Coprocessor
- *    9             Ethernet 0 Coprocessor
- *   10             Ethernet 1 Coprocessor
- *   11             NPE A
- *   12             NPE B
- *   13             NPE C
- *   14             PCI Controller
- *   15             ECC/TimeSync Coprocessor -  Only applicable to IXP46X
- *  16-17           Utopia PHY Limit Status : 0x0 - 32 PHY
- *                                            0x1 - 16 PHY
- *                                            0x2 -  8 PHY
- *                                            0x3 -  4 PHY
- *
- *  Portions below are only applicable to IXP46X
- *   18             USB Host Coprocessor
- *   19             NPE A Ethernet - 0 for Enable if Utopia = 1
- *   20             NPE B Ethernet coprocessor 1-3.
- *   21             RSA Crypto Block coprocessor.
- *  22-23           Processor frequency : 0x0 - 533 MHz
- *                                        0x1 - 667 MHz
- *                                        0x2 - 400 MHz
- *                                        0x3 - 266 MHz
- *  24-31           Reserved
- *
- ************************************************************************/
-/*Section generic to both IXP42X and IXP46X*/
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @enum IxFeatureCtrlComponentType
- *
- * @brief Enumeration for components availavble
- *
- */
-typedef enum
-{
-    IX_FEATURECTRL_RCOMP = 0, /**<bit location for RComp Circuitry*/
-    IX_FEATURECTRL_USB,       /**<bit location for USB Controller*/
-    IX_FEATURECTRL_HASH,      /**<bit location for Hashing Coprocessor*/
-    IX_FEATURECTRL_AES,       /**<bit location for AES Coprocessor*/
-    IX_FEATURECTRL_DES,       /**<bit location for DES Coprocessor*/
-    IX_FEATURECTRL_HDLC,      /**<bit location for HDLC Coprocessor*/
-    IX_FEATURECTRL_AAL,       /**<bit location for AAL Coprocessor*/
-    IX_FEATURECTRL_HSS,       /**<bit location for HSS Coprocessor*/
-    IX_FEATURECTRL_UTOPIA,    /**<bit location for UTOPIA Coprocessor*/
-    IX_FEATURECTRL_ETH0,      /**<bit location for Ethernet 0 Coprocessor*/
-    IX_FEATURECTRL_ETH1,      /**<bit location for Ethernet 1 Coprocessor*/
-    IX_FEATURECTRL_NPEA,      /**<bit location for NPE A*/
-    IX_FEATURECTRL_NPEB,      /**<bit location for NPE B*/
-    IX_FEATURECTRL_NPEC,      /**<bit location for NPE C*/
-    IX_FEATURECTRL_PCI,       /**<bit location for PCI Controller*/
-    IX_FEATURECTRL_ECC_TIMESYNC,     /**<bit location for TimeSync Coprocessor*/
-    IX_FEATURECTRL_UTOPIA_PHY_LIMIT, /**<bit location for Utopia PHY Limit Status*/
-    IX_FEATURECTRL_UTOPIA_PHY_LIMIT_BIT2, /**<2nd bit of PHY limit status*/
-    IX_FEATURECTRL_USB_HOST_CONTROLLER, /**<bit location for USB host controller*/
-    IX_FEATURECTRL_NPEA_ETH,  /**<bit location for NPE-A Ethernet Disable*/
-    IX_FEATURECTRL_NPEB_ETH,  /**<bit location for NPE-B Ethernet 1-3 Coprocessors Disable*/
-    IX_FEATURECTRL_RSA,       /**<bit location for RSA Crypto block Coprocessors Disable*/
-    IX_FEATURECTRL_XSCALE_MAX_FREQ, /**<bit location for XScale max frequency*/
-    IX_FEATURECTRL_XSCALE_MAX_FREQ_BIT2, /**<2nd xscale max freq bit NOT TO BE USED */
-    IX_FEATURECTRL_MAX_COMPONENTS
-} IxFeatureCtrlComponentType;
-
-/**
- * @ingroup IxFeatureCtrlDeviceId
- *
- * @enum IxFeatureCtrlDeviceId
- *
- * @brief Enumeration for device type.
- *
- * @warning This enum is closely related to the npe image. Its format should comply
- *          with formats used in the npe image ImageID. This is indicated by the  
- *          first nibble of the image ID. This should also be in sync with the
- *          with what is defined in CP15.  Current available formats are
- *          - IXP42X - 0000
- *          - IXP46X - 0001
- *
- */
-typedef enum
-{
-    IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X = 0, /**<Device type is IXP42X */
-    IX_FEATURE_CTRL_DEVICE_TYPE_IXP46X, /**<Device type is IXP46X */
-    IX_FEATURE_CTRL_DEVICE_TYPE_MAX /**<Max devices */
-} IxFeatureCtrlDeviceId;
-
-
-/**
- * @} addtogroup IxFeatureCtrlSwConfig
- */
-
-/*
- * Typedefs
- */
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- * 
- * @typedef IxFeatureCtrlReg
- *
- * @brief Feature Control Register that contains hardware components'
- *        availability information.
- */
-typedef UINT32 IxFeatureCtrlReg;
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- * 
- * @typedef IxFeatureCtrlProductId
- *
- * @brief Product ID of Silicon that contains Silicon Stepping and 
- *        Maximum XScale Core Frequency information.  
- */
-typedef UINT32 IxFeatureCtrlProductId;
-
-/*
- * Prototypes for interface functions
- */
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @fn IxFeatureCtrlReg ixFeatureCtrlRead (void)
- * 
- * @brief This function reads out the CURRENT value of Feature Control Register.
- *        The current value may not be the same as that of the hardware component 
- *        availability.    
- * 
- * The bit location of each hardware component is defined above. 
- * A value of '1' in bit means the hardware component is not available.  A value of '0'   
- * means the hardware component is available.
- *
- * @return 
- *      - IxFeatureCtrlReg - the current value of IXP400 Feature Control Register
- */ 
-PUBLIC IxFeatureCtrlReg
-ixFeatureCtrlRead (void);
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn IxFeatureDeviceId ixFeatureCtrlDeviceRead (void)
- *
- * @brief This function gets the type of device that the software is currently running
- *        on
- *
- * This function reads the feature Ctrl register specifically to obtain the device id.
- * The definitions of the avilable IDs are as above.
- *
- * @return
- *      - IxFeatureCtrlDeviceId - the type of device currently running
- */
-IxFeatureCtrlDeviceId
-ixFeatureCtrlDeviceRead (void);
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn IxFeatureCtrlBuildDevice ixFeatureCtrlSoftwareBuildGet (void)
- *
- * @brief This function refers to  the value set by the compiler flag to determine
- *        the type of device the software is built for.
- *
- * The function reads the compiler flag to determine the device the software is
- * built for. When the user executes build in the command line, 
- * a compile time flag (__ixp42X/__ixp46X is set. This API reads this 
- * flag and returns the software build type to the calling client.
- *
- * @return
- *      - IxFeatureCtrlBuildDevice - the type of device software is built for.
- */
-IxFeatureCtrlBuildDevice
-ixFeatureCtrlSoftwareBuildGet (void);
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @fn IxFeatureCtrlReg ixFeatureCtrlHwCapabilityRead (void)
- * 
- * @brief This function reads out the hardware capability of a silicon type as defined in 
- * feature control register.This value is different from that returned by 
- * ixFeatureCtrlRead() because this function returns the actual hardware component
- * availability.     
- *
- * The bit location of each hardware component is defined above. 
- * A value of '1' in bit means the hardware component is not available.  A value of '0'   
- * means the hardware component is available.
- *
- * @return 
- *      - IxFeatureCtrlReg - the hardware capability of IXP400. 
- *
- * @warning
- *      - This function must not be called when IXP400 is running as the result
- *        is undefined.    
- */ 
-PUBLIC IxFeatureCtrlReg
-ixFeatureCtrlHwCapabilityRead (void);
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @fn void ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg)
- * 
- * @brief This function write the value stored in IxFeatureCtrlReg expUnitReg  
- *        to the Feature Control Register. 
- * 
- * The bit location of each hardware component is defined above.
- * The write is only effective on available hardware components. Writing '1' in a  
- * bit will software disable the respective hardware component. A '0' will mean that  
- * the hardware component will remain to be operable. 
- *
- * @param expUnitReg @ref IxFeatureCtrlReg [in] - The value to be written to feature control 
- *                                          register.
- *
- * @return none
- *
- */ 
-PUBLIC void
-ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg);
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @fn IX_STATUS ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType)
- * 
- * @brief This function will check the availability of hardware component specified
- *        as componentType value. 
- *
- *        Usage Example:<br> 
- *         -  if(IX_FEATURE_CTRL_COMPONENT_DISABLED != 
- *              ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0)) <br>
- *         -  if(IX_FEATURE_CTRL_COMPONENT_ENABLED == 
- *              ixFeatureCtrlComponentCheck(IX_FEATURECTRL_PCI)) <br>
- *
- * This function is typically called during component initialization time. 
- *
- * @param componentType @ref IxFeatureCtrlComponentType [in] - the type of a component as
- *        defined above as IX_FEATURECTRL_XXX (Exp: IX_FEATURECTRL_PCI, IX_FEATURECTRL_ETH0)           
-
- *        
- * @return 
- *      - IX_FEATURE_CTRL_COMPONENT_ENABLED if component is available 
- *      - IX_FEATURE_CTRL_COMPONENT_DISABLED if component is unavailable            
- */ 
-PUBLIC IX_STATUS
-ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType);
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- * 
- * @fn IxFeatureCtrlProductId ixFeatureCtrlProductIdRead (void)
- * 
- * @brief This function will return IXP400 product ID i.e. CP15,
- *        Register 0.
- *                                                
- * @return 
- *      - IxFeatureCtrlProductId - the value of product ID.
- *
- */ 
-PUBLIC IxFeatureCtrlProductId
-ixFeatureCtrlProductIdRead (void) ;
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @fn IX_STATUS ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType)
- * 
- * @brief This function checks whether the specified software configuration is
- *        enabled or disabled. 
- *
- *        Usage Example:<br> 
- *        - if(IX_FEATURE_CTRL_SWCONFIG_DISABLED != 
- *            ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) <br>
- *        - if(IX_FEATURE_CTRL_SWCONFIG_ENABLED == 
- *            ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) <br>
- *
- * This function is typically called during access component initialization time. 
- *
- * @param swConfigType @ref IxFeatureCtrlSwConfig [in] - the type of a software configuration
- *        defined in IxFeatureCtrlSwConfig enumeration.          
- *        
- * @return 
- *      - IX_FEATURE_CTRL_SWCONFIG_ENABLED if software configuration is enabled. 
- *      - IX_FEATURE_CTRL_SWCONFIG_DISABLED if software configuration is disabled.            
- */ 
-PUBLIC IX_STATUS
-ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType);
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @fn void ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled)
- * 
- * @brief This function enable/disable the specified software configuration.  
- *
- *        Usage Example:<br> 
- *        - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, true) is used
- *          to enable Ethernet Learning Feature <br>
- *        - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, false) is used
- *          to disable Ethernet Learning Feature <br> 
- *
- * @param swConfigType IxFeatureCtrlSwConfig [in] - the type of a software configuration
- *        defined in IxFeatureCtrlSwConfig enumeration. 
- * @param enabled BOOL [in] - To enable(true) / disable (false) the specified software
- *                           configuration.            
- *
- * @return none
- *          
- */ 
-PUBLIC void
-ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled);
-
-/**
- * @ingroup IxFeatureCtrlAPI 
- *
- * @fn void ixFeatureCtrlIxp400SwVersionShow (void)
- * 
- * @brief This function shows the current software release information for IXP400 
- *          
- * @return none
- *          
- */ 
-PUBLIC void
-ixFeatureCtrlIxp400SwVersionShow (void);
-
-#endif /* IXFEATURECTRL_H */
-
-/**
- * @} defgroup IxFeatureCtrlAPI
- */
diff --git a/drivers/net/npe/include/IxHssAcc.h b/drivers/net/npe/include/IxHssAcc.h
deleted file mode 100644
index da71c42..0000000
--- a/drivers/net/npe/include/IxHssAcc.h
+++ /dev/null
@@ -1,1292 +0,0 @@
-/**
- * @file IxHssAcc.h
- * 
- * @date 07-DEC-2001
- *
- * @brief This file contains the public API of the IXP400 HSS Access
- * component
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
- 
-/* ------------------------------------------------------
-   Doxygen group definitions
-   ------------------------------------------------------ */
-/**
- * @defgroup IxHssAccAPI IXP400 HSS Access (IxHssAcc) API
- *
- * @brief The public API for the IXP400 HssAccess component
- *
- * IxHssAcc is the access layer to the HSS packetised and channelised
- * services
- * 
- * <b> Design Notes </b><br>
- * <UL>
- * <LI>When a packet-pipe is configured for 56Kbps RAW mode, byte alignment of 
- *     the transmitted data is not preserved. All raw data that is transmitted 
- *     will be received in proper order by the receiver, but the first bit of 
- *     the packet may be seen at any offset within a byte; all subsequent bytes 
- *     will have the same offset for the duration of the packet. The same offset 
- *     also applies to all subsequent packets received on the packet-pipe too. 
- *     (Similar results will occur for data received from remote end.) While 
- *     this behavior will also occur for 56Kbps HDLC mode, the HDLC 
- *     encoding/decoding will preserve the original byte alignment at the 
- *     receiver end.
- * </UL>
- *
- * <b> 56Kbps Packetised Service Bandwidth Limitation </b><br>
- * <UL>
- * <LI>IxHssAcc supports 56Kbps packetised service at a maximum aggregate rate
- *     for all HSS ports/HDLC channels of 12.288Mbps[1] in each direction, i.e.
- *     it supports 56Kbps packetised service on up to 8 T1 trunks. It does
- *     not support 56Kbps packetised service on 8 E1 trunks (i.e. 4 trunks per 
- *     HSS port) unless those trunks are running 'fractional E1' with maximum 
- *     aggregate rate of 12.288 Mbps in each direction.<br>
- *     [1] 12.288Mbps = 1.536Mbp * 8 T1
- * </UL>
- * @{ */
-
-#ifndef IXHSSACC_H
-#define IXHSSACC_H
-
-#include "IxOsal.h"
-
-/*
- * #defines for function return types, etc.
- */
-
-/**
- * @def IX_HSSACC_TSLOTS_PER_HSS_PORT
- *
- * @brief The max number of TDM timeslots supported per HSS port - 4E1's =
- *  32x4 = 128 
- */
-#define IX_HSSACC_TSLOTS_PER_HSS_PORT 128
-
-/* -----------------------------------------------------------
-   The following are HssAccess return values returned through 
-   service interfaces. The globally defined IX_SUCCESS (0) and
-   IX_FAIL (1) in IxOsalTypes.h are also used.
-   ----------------------------------------------------------- */
-/**
- * @def IX_HSSACC_PARAM_ERR
- *
- * @brief HssAccess function return value for a parameter error
- */
-#define IX_HSSACC_PARAM_ERR 2
-
-/**
- * @def IX_HSSACC_RESOURCE_ERR
- *
- * @brief HssAccess function return value for a resource error
- */
-#define IX_HSSACC_RESOURCE_ERR 3
-
-/**
- * @def IX_HSSACC_PKT_DISCONNECTING
- *
- * @brief Indicates that a disconnect call is progressing and will 
- * disconnect soon
- */
-#define IX_HSSACC_PKT_DISCONNECTING 4
-
-/**
- * @def IX_HSSACC_Q_WRITE_OVERFLOW
- *
- * @brief Indicates that an attempt to Tx or to replenish an 
- * RxFree Q failed due to Q overflow.  
- */
-#define IX_HSSACC_Q_WRITE_OVERFLOW 5
-
-/* -------------------------------------------------------------------
-   The following errors are HSS/NPE errors returned on error retrieval
-   ------------------------------------------------------------------- */
-/**
- * @def IX_HSSACC_NO_ERROR
- *
- * @brief HSS port no error present
- */
-#define IX_HSSACC_NO_ERROR 0
-
-/**
- * @def IX_HSSACC_TX_FRM_SYNC_ERR
- *
- * @brief HSS port TX Frame Sync error
- */
-#define IX_HSSACC_TX_FRM_SYNC_ERR 1
-
-/**
- * @def IX_HSSACC_TX_OVER_RUN_ERR
- *
- * @brief HSS port TX over-run error
- */
-#define IX_HSSACC_TX_OVER_RUN_ERR 2
-
-/**
- * @def IX_HSSACC_CHANNELISED_SW_TX_ERR
- *
- * @brief NPE software error in channelised TX
- */
-#define IX_HSSACC_CHANNELISED_SW_TX_ERR 3
-
-/**
- * @def IX_HSSACC_PACKETISED_SW_TX_ERR
- *
- * @brief NPE software error in packetised TX
- */
-#define IX_HSSACC_PACKETISED_SW_TX_ERR 4
-
-/**
- * @def IX_HSSACC_RX_FRM_SYNC_ERR
- *
- * @brief HSS port RX Frame Sync error
- */
-#define IX_HSSACC_RX_FRM_SYNC_ERR 5
-
-/**
- * @def IX_HSSACC_RX_OVER_RUN_ERR
- *
- * @brief HSS port RX over-run error
- */
-#define IX_HSSACC_RX_OVER_RUN_ERR 6
-
-/**
- * @def IX_HSSACC_CHANNELISED_SW_RX_ERR
- *
- * @brief NPE software error in channelised RX
- */
-#define IX_HSSACC_CHANNELISED_SW_RX_ERR 7
-
-/**
- * @def IX_HSSACC_PACKETISED_SW_RX_ERR
- *
- * @brief NPE software error in packetised TX
- */
-#define IX_HSSACC_PACKETISED_SW_RX_ERR 8
-
-/* -----------------------------------
-   Packetised service specific defines
-   ----------------------------------- */
-
-/**
- * @def IX_HSSACC_PKT_MIN_RX_MBUF_SIZE
- *
- * @brief Minimum size of the Rx mbuf in bytes which the client must supply 
- * to the component. 
- */
-#define IX_HSSACC_PKT_MIN_RX_MBUF_SIZE 64
-
-/* --------------------------------------------------------------------
-   Enumerated Types - these enumerated values may be used in setting up
-   the contents of hardware registers
-   -------------------------------------------------------------------- */
-/**
- * @enum IxHssAccHssPort
- * @brief The HSS port ID - There are two identical ports (0-1). 
- * 
- */
-typedef enum
-{
-    IX_HSSACC_HSS_PORT_0,   /**< HSS Port 0 */
-    IX_HSSACC_HSS_PORT_1,   /**< HSS Port 1 */
-    IX_HSSACC_HSS_PORT_MAX  /**< Delimiter for error checks */
-} IxHssAccHssPort;
-
-/**
- * @enum IxHssAccHdlcPort
- * @brief The HDLC port ID - There are four identical HDLC ports (0-3) per 
- * HSS port and they correspond to the 4 E1/T1 trunks.
- * 
- */
-typedef enum
-{
-   IX_HSSACC_HDLC_PORT_0,   /**< HDLC Port 0 */
-   IX_HSSACC_HDLC_PORT_1,   /**< HDLC Port 1 */
-   IX_HSSACC_HDLC_PORT_2,   /**< HDLC Port 2 */
-   IX_HSSACC_HDLC_PORT_3,   /**< HDLC Port 3 */
-   IX_HSSACC_HDLC_PORT_MAX  /**< Delimiter for error checks */
-} IxHssAccHdlcPort;
-
-/**
- * @enum IxHssAccTdmSlotUsage
- * @brief The HSS TDM stream timeslot assignment types
- *
- */
-typedef enum
-{
-    IX_HSSACC_TDMMAP_UNASSIGNED,    /**< Unassigned */
-    IX_HSSACC_TDMMAP_HDLC,          /**< HDLC - packetised */
-    IX_HSSACC_TDMMAP_VOICE56K,      /**< Voice56K - channelised */
-    IX_HSSACC_TDMMAP_VOICE64K,      /**< Voice64K - channelised */
-    IX_HSSACC_TDMMAP_MAX            /**< Delimiter for error checks */
-} IxHssAccTdmSlotUsage;
-
-/**
- * @enum IxHssAccFrmSyncType
- * @brief The HSS frame sync pulse type
- *
- */
-typedef enum
-{
-    IX_HSSACC_FRM_SYNC_ACTIVE_LOW,   /**< Frame sync is sampled low */
-    IX_HSSACC_FRM_SYNC_ACTIVE_HIGH,  /**< sampled high */
-    IX_HSSACC_FRM_SYNC_FALLINGEDGE,  /**< sampled on a falling edge */
-    IX_HSSACC_FRM_SYNC_RISINGEDGE,   /**< sampled on a rising edge */
-    IX_HSSACC_FRM_SYNC_TYPE_MAX      /**< Delimiter for error checks */
-} IxHssAccFrmSyncType;
-
-/**
- * @enum IxHssAccFrmSyncEnable
- * @brief The IxHssAccFrmSyncEnable determines how the frame sync pulse is
- * used
- * */
-typedef enum
-{
-    IX_HSSACC_FRM_SYNC_INPUT,          /**< Frame sync is sampled as an input */
-    IX_HSSACC_FRM_SYNC_INVALID_VALUE,  /**< 1 is not used */
-    IX_HSSACC_FRM_SYNC_OUTPUT_FALLING, /**< Frame sync is an output generated 
-					  off a falling clock edge */
-    IX_HSSACC_FRM_SYNC_OUTPUT_RISING,  /**< Frame sync is an output generated 
-					  off a rising clock edge */
-    IX_HSSACC_FRM_SYNC_ENABLE_MAX      /**< Delimiter for error checks */
-} IxHssAccFrmSyncEnable;
-
-/**
- * @enum IxHssAccClkEdge
- * @brief IxHssAccClkEdge is used to determine the clk edge to use for 
- * framing and data
- *
- */
-typedef enum
-{
-    IX_HSSACC_CLK_EDGE_FALLING,  /**< Clock sampled off a falling edge */
-    IX_HSSACC_CLK_EDGE_RISING,   /**< Clock sampled off a rising edge */
-    IX_HSSACC_CLK_EDGE_MAX       /**< Delimiter for error checks */
-} IxHssAccClkEdge;
-
-/**
- * @enum IxHssAccClkDir
- * @brief The HSS clock direction
- *
- */
-typedef enum
-{
-    IX_HSSACC_SYNC_CLK_DIR_INPUT,    /**< Clock is an input */
-    IX_HSSACC_SYNC_CLK_DIR_OUTPUT,   /**< Clock is an output */
-    IX_HSSACC_SYNC_CLK_DIR_MAX       /**< Delimiter for error checks */
-} IxHssAccClkDir;
-
-/**
- * @enum IxHssAccFrmPulseUsage
- * @brief The HSS frame pulse usage
- *
- */
-typedef enum
-{
-    IX_HSSACC_FRM_PULSE_ENABLED,     /**< Generate/Receive frame pulses */
-    IX_HSSACC_FRM_PULSE_DISABLED,    /**< Disregard frame pulses */
-    IX_HSSACC_FRM_PULSE_MAX          /**< Delimiter for error checks */
-} IxHssAccFrmPulseUsage;
-
-/**
- * @enum IxHssAccDataRate
- * @brief The HSS Data rate in relation to the clock
- *
- */
-typedef enum
-{
-    IX_HSSACC_CLK_RATE,      /**< Data rate is at the configured clk speed */
-    IX_HSSACC_HALF_CLK_RATE, /**< Data rate is half the configured clk speed */
-    IX_HSSACC_DATA_RATE_MAX  /**< Delimiter for error checks */
-} IxHssAccDataRate;
-
-/**
- * @enum IxHssAccDataPolarity
- * @brief The HSS data polarity type
- *
- */
-typedef enum
-{
-    IX_HSSACC_DATA_POLARITY_SAME,   /**< Don't invert data between NPE and 
-				       HSS FIFOs */
-    IX_HSSACC_DATA_POLARITY_INVERT, /**< Invert data between NPE and HSS 
-				       FIFOs */
-    IX_HSSACC_DATA_POLARITY_MAX     /**< Delimiter for error checks */
-} IxHssAccDataPolarity;
-
-/**
- * @enum IxHssAccBitEndian
- * @brief HSS Data endianness
- *
- */
-typedef enum
-{
-    IX_HSSACC_LSB_ENDIAN,    /**< TX/RX Least Significant Bit first */
-    IX_HSSACC_MSB_ENDIAN,    /**< TX/RX Most Significant Bit first */
-    IX_HSSACC_ENDIAN_MAX     /**< Delimiter for the purposes of error checks */
-} IxHssAccBitEndian;
-
-
-/**
- * @enum IxHssAccDrainMode
- * @brief Tx pin open drain mode
- *
- */
-typedef enum
-{
-    IX_HSSACC_TX_PINS_NORMAL,       /**< Normal mode */
-    IX_HSSACC_TX_PINS_OPEN_DRAIN,   /**< Open Drain mode */
-    IX_HSSACC_TX_PINS_MAX           /**< Delimiter for error checks */
-} IxHssAccDrainMode;
-
-/**
- * @enum IxHssAccSOFType
- * @brief HSS start of frame types
- *
- */
-typedef enum
-{
-    IX_HSSACC_SOF_FBIT,  /**< Framing bit transmitted and expected on rx */
-    IX_HSSACC_SOF_DATA,  /**< Framing bit not transmitted nor expected on rx */
-    IX_HSSACC_SOF_MAX    /**< Delimiter for error checks */
-} IxHssAccSOFType;
-
-/**
- * @enum IxHssAccDataEnable
- * @brief IxHssAccDataEnable is used to determine whether or not to drive 
- * the data pins
- *
- */
-typedef enum
-{
-    IX_HSSACC_DE_TRI_STATE,   /**< TRI-State the data pins */
-    IX_HSSACC_DE_DATA,        /**< Push data out the data pins */
-    IX_HSSACC_DE_MAX          /**< Delimiter for error checks */
-} IxHssAccDataEnable;
-
-/**
- * @enum IxHssAccTxSigType
- * @brief IxHssAccTxSigType is used to determine how to drive the data pins
- *
- */
-typedef enum
-{
-    IX_HSSACC_TXSIG_LOW,        /**< Drive the data pins low */
-    IX_HSSACC_TXSIG_HIGH,       /**< Drive the data pins high */
-    IX_HSSACC_TXSIG_HIGH_IMP,   /**< Drive the data pins with high impedance */
-    IX_HSSACC_TXSIG_MAX         /**< Delimiter for error checks */
-} IxHssAccTxSigType;
-
-/**
- * @enum IxHssAccFbType
- * @brief IxHssAccFbType determines how to drive the Fbit
- *
- * @warning This will only be used for T1 @ 1.544MHz
- *
- */
-typedef enum
-{
-    IX_HSSACC_FB_FIFO,        /**< Fbit is dictated in FIFO */
-    IX_HSSACC_FB_HIGH_IMP,    /**< Fbit is high impedance */
-    IX_HSSACC_FB_MAX          /**< Delimiter for error checks */
-} IxHssAccFbType;
-
-/**
- * @enum IxHssAcc56kEndianness
- * @brief 56k data endianness when using the 56k type
- *
- */
-typedef enum
-{
-    IX_HSSACC_56KE_BIT_7_UNUSED,  /**< High bit is unused */
-    IX_HSSACC_56KE_BIT_0_UNUSED,  /**< Low bit is unused */
-    IX_HSSACC_56KE_MAX            /**< Delimiter for error checks */
-} IxHssAcc56kEndianness;
-
-/**
- * @enum IxHssAcc56kSel
- * @brief 56k data transmission type when using the 56k type
- *
- */
-typedef enum
-{
-    IX_HSSACC_56KS_32_8_DATA,  /**< 32/8 bit data */
-    IX_HSSACC_56KS_56K_DATA,   /**< 56K data */
-    IX_HSSACC_56KS_MAX         /**< Delimiter for error checks */
-} IxHssAcc56kSel;
-
-
-/**
- * @enum IxHssAccClkSpeed
- * @brief IxHssAccClkSpeed represents the HSS clock speeds available
- *
- */
-typedef enum
-{
-    IX_HSSACC_CLK_SPEED_512KHZ,     /**< 512KHz */
-    IX_HSSACC_CLK_SPEED_1536KHZ,    /**< 1.536MHz */
-    IX_HSSACC_CLK_SPEED_1544KHZ,    /**< 1.544MHz */
-    IX_HSSACC_CLK_SPEED_2048KHZ,    /**< 2.048MHz */
-    IX_HSSACC_CLK_SPEED_4096KHZ,    /**< 4.096MHz */
-    IX_HSSACC_CLK_SPEED_8192KHZ,    /**< 8.192MHz */
-    IX_HSSACC_CLK_SPEED_MAX      /**< Delimiter for error checking */
-} IxHssAccClkSpeed;
-
-/**
- * @enum IxHssAccPktStatus
- * @brief Indicates the status of packets passed to the client
- *
- */
-typedef enum
-{
-    IX_HSSACC_PKT_OK,              /**< Error free.*/
-    IX_HSSACC_STOP_SHUTDOWN_ERROR, /**< Errored due to stop or shutdown 
-				      occurrance.*/
-    IX_HSSACC_HDLC_ALN_ERROR,      /**< HDLC alignment error */
-    IX_HSSACC_HDLC_FCS_ERROR,       /**< HDLC Frame Check Sum error.*/
-    IX_HSSACC_RXFREE_Q_EMPTY_ERROR,       /**< RxFree Q became empty 
-					     while receiving this packet.*/
-    IX_HSSACC_HDLC_MAX_FRAME_SIZE_EXCEEDED,      /**< HDLC frame size 
-						   received is greater than
-						   max specified at connect.*/
-    IX_HSSACC_HDLC_ABORT_ERROR,   /**< HDLC frame received is invalid due to an 
-				   abort sequence received.*/
-    IX_HSSACC_DISCONNECT_IN_PROGRESS     /**< Packet returned
-					    because a disconnect is in progress */
-} IxHssAccPktStatus;
-
-
-/**
- * @enum IxHssAccPktCrcType
- * @brief HDLC CRC type
- *
- */
-typedef enum
-{
-    IX_HSSACC_PKT_16_BIT_CRC = 16,  /**< 16 bit CRC is being used */
-    IX_HSSACC_PKT_32_BIT_CRC = 32   /**< 32 bit CRC is being used */
-} IxHssAccPktCrcType;
-
-/**
- * @enum IxHssAccPktHdlcIdleType
- * @brief HDLC idle transmission type
- *
- */
-typedef enum
-{
-    IX_HSSACC_HDLC_IDLE_ONES,    /**< idle tx/rx will be a succession of ones */
-    IX_HSSACC_HDLC_IDLE_FLAGS    /**< idle tx/rx will be repeated flags */
-} IxHssAccPktHdlcIdleType;
-
-/**
- * @brief Structure containing HSS port configuration parameters
- *
- * Note: All of these are used for TX. Only some are specific to RX.
- *
- */
-typedef struct
-{
-    IxHssAccFrmSyncType frmSyncType;     /**< frame sync pulse type (tx/rx) */
-    IxHssAccFrmSyncEnable frmSyncIO;     /**< how the frame sync pulse is 
-					    used (tx/rx) */
-    IxHssAccClkEdge frmSyncClkEdge;      /**< frame sync clock edge type 
-					    (tx/rx) */
-    IxHssAccClkEdge dataClkEdge;         /**< data clock edge type (tx/rx) */
-    IxHssAccClkDir clkDirection;         /**< clock direction (tx/rx) */
-    IxHssAccFrmPulseUsage frmPulseUsage; /**< whether to use the frame sync 
-					    pulse or not (tx/rx) */
-    IxHssAccDataRate dataRate;           /**< data rate in relation to the 
-					    clock (tx/rx) */
-    IxHssAccDataPolarity dataPolarity;   /**< data polarity type (tx/rx) */
-    IxHssAccBitEndian dataEndianness;    /**< data endianness (tx/rx) */
-    IxHssAccDrainMode drainMode;         /**< tx pin open drain mode (tx) */
-    IxHssAccSOFType fBitUsage;           /**< start of frame types (tx/rx) */
-    IxHssAccDataEnable dataEnable;       /**< whether or not to drive the data 
-					    pins (tx) */
-    IxHssAccTxSigType voice56kType;      /**< how to drive the data pins for 
-					    voice56k type (tx) */
-    IxHssAccTxSigType unassignedType;    /**< how to drive the data pins for 
-					    unassigned type (tx) */
-    IxHssAccFbType fBitType;             /**< how to drive the Fbit (tx) */
-    IxHssAcc56kEndianness voice56kEndian;/**< 56k data endianness when using 
-					    the 56k type (tx) */
-    IxHssAcc56kSel voice56kSel;          /**< 56k data transmission type when 
-					    using the 56k type (tx) */
-    unsigned frmOffset;                  /**< frame pulse offset in bits wrt 
-					    the first timeslot (0-1023) (tx/rx) */
-    unsigned maxFrmSize;                 /**< frame size in bits (1-1024) 
-					    (tx/rx) */
-} IxHssAccPortConfig;
-
-/**
- * @brief Structure containing HSS configuration parameters
- *
- */
-typedef struct
-{
-    IxHssAccPortConfig txPortConfig; /**< HSS tx port configuration */
-    IxHssAccPortConfig rxPortConfig; /**< HSS rx port configuration */
-    unsigned numChannelised;         /**< The number of channelised 
-					timeslots (0-32) */
-    unsigned hssPktChannelCount;     /**< The number of packetised 
-					clients (0 - 4) */
-    UINT8 channelisedIdlePattern;    /**< The byte to be transmitted on 
-					channelised service when there 
-					is no client data to tx */
-    BOOL loopback;                   /**< The HSS loopback state */
-    unsigned packetizedIdlePattern;  /**< The data to be transmitted on 
-					packetised service when there is 
-					no client data to tx */
-    IxHssAccClkSpeed clkSpeed;       /**< The HSS clock speed */
-} IxHssAccConfigParams;
-
-/**
- * @brief This structure contains 56Kbps, HDLC-mode configuration parameters
- *
- */
-typedef struct
-{
-    BOOL hdlc56kMode;                    /**< 56kbps(true)/64kbps(false) HDLC */
-    IxHssAcc56kEndianness hdlc56kEndian; /**< 56kbps data endianness 
-					    - ignored if hdlc56kMode is false*/
-    BOOL hdlc56kUnusedBitPolarity0;      /**< The polarity '0'(true)/'1'(false) of the unused
-					   bit while in 56kbps mode
-					   - ignored if hdlc56kMode is false*/
-} IxHssAccHdlcMode;
-
-/**
- * @brief This structure contains information required by the NPE to 
- * configure the HDLC co-processor
- *
- */
-typedef struct
-{
-    IxHssAccPktHdlcIdleType hdlcIdleType;   /**< What to transmit when a HDLC port is idle */
-    IxHssAccBitEndian dataEndian;           /**< The HDLC data endianness */
-    IxHssAccPktCrcType crcType;             /**< The CRC type to be used for this HDLC port */
-} IxHssAccPktHdlcFraming;
-
-/**
- * @typedef UINT32 IxHssAccPktUserId
- *
- * @brief The client supplied value which will be supplied as a parameter
- * with a given callback.
- *
- * This value will be passed into the ixHssAccPktPortConnect function once each
- * with given callbacks.  This value will then be passed back to the client
- * as one of the parameters to each of these callbacks, 
- * when these callbacks are called.
- */
-typedef UINT32 IxHssAccPktUserId;
-
-
-/**
- * @typedef IxHssAccLastErrorCallback
- * @brief Prototype of the clients function to accept notification of the 
- * last error
- *
- * This function is registered through the config. The client will initiate
- * the last error retrieval. The HssAccess component will send a message to
- * the NPE through the NPE Message Handler. When a response to the read is
- * received, the NPE Message Handler will callback the HssAccess component
- * which will execute this function in the same IxNpeMh context. The client
- * will be passed the last error and the related service port (packetised
- * 0-3, channelised 0)
- *
- * @param lastHssError unsigned [in] - The last Hss error registered that
- *                                      has been registered.
- * @param servicePort unsigned [in] - This is the service port number.  
- *                                     (packetised 0-3, channelised 0) 
- * 
- * @return void
- */
-typedef void (*IxHssAccLastErrorCallback) (unsigned lastHssError, 
-					   unsigned servicePort);
-
-/**
- * @typedef IxHssAccPktRxCallback
- * @brief  Prototype of the clients function to accept notification of 
- * packetised rx
- *
- * This function is registered through the ixHssAccPktPortConnect. hssPktAcc will pass
- * received data in the form of mbufs to the client.  The mbuf passed back
- * to the client could contain a chain of buffers, depending on the packet
- * size received. 
- * 
- * @param *buffer @ref IX_OSAL_MBUF [in] - This is the mbuf which contains the 
- * payload received.
- * @param numHssErrs unsigned [in] - This is the number of hssErrors 
- * the Npe has received
- * @param pktStatus @ref IxHssAccPktStatus [in] - This is the status of the 
- * mbuf that has been received.
- * @param rxUserId @ref IxHssAccPktUserId [in] - This is the client supplied value 
- * passed in at ixHssAccPktPortConnect time which is now returned to the client.			       
- * 
- * @return void
- */
-typedef void (*IxHssAccPktRxCallback) (IX_OSAL_MBUF *buffer, 
-				       unsigned numHssErrs, 
-				       IxHssAccPktStatus pktStatus, 
-				       IxHssAccPktUserId rxUserId);
-
-/**
- * @typedef IxHssAccPktRxFreeLowCallback
- * @brief Prototype of the clients function to accept notification of 
- * requirement of more Rx Free buffers
- *
- * The client can choose to register a callback of this type when
- * calling a connecting. This function is registered through the ixHssAccPktPortConnect. 
- * If defined, the access layer will provide the trigger for
- * this callback. The callback will be responsible for supplying mbufs to
- * the access layer for use on the receive path from the HSS using
- * ixHssPktAccFreeBufReplenish. 
- *
- * @return void
- */
-typedef void (*IxHssAccPktRxFreeLowCallback) (IxHssAccPktUserId rxFreeLowUserId);
-
-/**
- * @typedef IxHssAccPktTxDoneCallback
- * @brief  Prototype of the clients function to accept notification of 
- * completion with Tx buffers
- *
- * This function is registered through the ixHssAccPktPortConnect.  It enables
- * the hssPktAcc to pass buffers back to the client
- * when transmission is complete.
- *
- * @param *buffer @ref IX_OSAL_MBUF [in] - This is the mbuf which contained 
- * the payload that was for Tx.
- * @param numHssErrs unsigned [in] - This is the number of hssErrors 
- * the Npe has received
- * @param pktStatus @ref IxHssAccPktStatus [in] - This is the status of the 
- * mbuf that has been transmitted.
- * @param txDoneUserId @ref IxHssAccPktUserId [in] - This is the client supplied value 
- * passed in at ixHssAccPktPortConnect time which is now returned to the client.	 
- *
- * @return void
- */
-typedef void (*IxHssAccPktTxDoneCallback) (IX_OSAL_MBUF *buffer, 
-					   unsigned numHssErrs,
-					   IxHssAccPktStatus pktStatus, 
-					   IxHssAccPktUserId txDoneUserId);
-
-/**
- * @typedef IxHssAccChanRxCallback
- * @brief Prototype of the clients function to accept notification of 
- * channelised rx
- *
- * This callback, if defined by the client in the connect, will get called
- * in the context of an IRQ. The IRQ will be triggered when the hssSyncQMQ
- * is not empty. The queued entry will be dequeued and this function will
- * be executed.
- *
- * @param hssPortId @ref IxHssAccHssPort - The HSS port Id. There are two
- * identical ports (0-1).
- * @param txOffset unsigned [in] - an offset indicating from where within
- * the txPtrList the NPE is currently transmitting from.
- * @param rxOffset unsigned [in] - an offset indicating where within the
- * receive buffers the NPE has just written the received data to.
- * @param numHssErrs unsigned [in] - This is the number of hssErrors 
- * the Npe has received
- *
- * @return void
- */
-typedef void (*IxHssAccChanRxCallback) (IxHssAccHssPort hssPortId,
-					unsigned rxOffset, 
-					unsigned txOffset, 
-					unsigned numHssErrs);
-
-/*
- * Prototypes for interface functions.
- */
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccPortInit (IxHssAccHssPort hssPortId, 
-               IxHssAccConfigParams *configParams, 
-               IxHssAccTdmSlotUsage *tdmMap, 
-               IxHssAccLastErrorCallback lastHssErrorCallback)
- *
- * @brief Initialise a HSS port. No channelised or packetised connections
- * should exist in the HssAccess layer while this interface is being called.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- * @param *configParams @ref IxHssAccConfigParams [in] - A pointer to the HSS 
- * configuration structure
- * @param *tdmMap @ref IxHssAccTdmSlotUsage [in] - A pointer to an array of size
- * IX_HSSACC_TSLOTS_PER_HSS_PORT, defining the slot usage over the HSS port
- * @param lastHssErrorCallback @ref IxHssAccLastErrorCallback [in] - Client 
- * callback to report last error
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- */
-PUBLIC IX_STATUS 
-ixHssAccPortInit (IxHssAccHssPort hssPortId, 
-		  IxHssAccConfigParams *configParams, 
-		  IxHssAccTdmSlotUsage *tdmMap, 
-		  IxHssAccLastErrorCallback lastHssErrorCallback);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccLastErrorRetrievalInitiate (
-               IxHssAccHssPort hssPortId)
- *
- * @brief Initiate the retrieval of the last HSS error. The HSS port
- * should be configured before attempting to call this interface.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - the HSS port ID
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- */
-PUBLIC IX_STATUS 
-ixHssAccLastErrorRetrievalInitiate (IxHssAccHssPort hssPortId);
-
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccInit ()
- *
- * @brief This function is responsible for initialising resources for use
- * by the packetised and channelised clients. It should be called after 
- * HSS NPE image has been downloaded into NPE-A and before any other
- * HssAccess interface is called. 
- * No other HssAccPacketised interface should be called while this interface
- * is being processed.
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due
- *                          to a resource error 
- */
-PUBLIC IX_STATUS 
-ixHssAccInit (void);
-
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn ixHssAccPktPortConnect (IxHssAccHssPort hssPortId, 
-			IxHssAccHdlcPort hdlcPortId, 
-			BOOL hdlcFraming, 
-			IxHssAccHdlcMode hdlcMode,
-			BOOL hdlcBitInvert,
-			unsigned blockSizeInWords,
-			UINT32 rawIdleBlockPattern,
-			IxHssAccPktHdlcFraming hdlcTxFraming, 
-			IxHssAccPktHdlcFraming hdlcRxFraming, 
-			unsigned frmFlagStart, 
-			IxHssAccPktRxCallback rxCallback,
-			IxHssAccPktUserId rxUserId, 
-			IxHssAccPktRxFreeLowCallback rxFreeLowCallback, 
-			IxHssAccPktUserId rxFreeLowUserId,
-			IxHssAccPktTxDoneCallback txDoneCallback,
-			IxHssAccPktUserId txDoneUserId) 
- *
- * @brief This function is responsible for connecting a client to one of 
- * the 4 available HDLC ports. The HSS port should be configured before 
- * attempting a connect. No other HssAccPacketised interface should be
- * called while this connect is being processed.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port and 
- * it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 
- * @param hdlcFraming BOOL [in] - This value determines whether the service 
- * will use HDLC data or the debug, raw data type i.e. no HDLC processing
- * @param hdlcMode @ref IxHssAccHdlcMode [in] - This structure contains 56Kbps, HDLC-mode
- * configuration parameters
- * @param hdlcBitInvert BOOL [in] - This value determines whether bit inversion
- * will occur between HDLC and HSS co-processors i.e. post-HDLC processing for
- * transmit and pre-HDLC processing for receive, for the specified HDLC Termination
- * Point
- * @param blockSizeInWords unsigned [in] -  The max tx/rx block size 
- * @param rawIdleBlockPattern UINT32 [in] -  Tx idle pattern in raw mode 
- * @param hdlcTxFraming @ref IxHssAccPktHdlcFraming [in] - This structure contains 
- * the following information required by the NPE to configure the HDLC 
- * co-processor for TX
- * @param hdlcRxFraming @ref IxHssAccPktHdlcFraming [in] -  This structure contains 
- * the following information required by the NPE to configure the HDLC 
- * co-processor for RX
- * @param frmFlagStart unsigned - Number of flags to precede to 
- * transmitted flags (0-2).
- * @param rxCallback @ref IxHssAccPktRxCallback [in] - Pointer to 
- * the clients packet receive function.
- * @param rxUserId @ref IxHssAccPktUserId [in] - The client supplied rx value
- * to be passed back as an argument to the supplied rxCallback
- * @param rxFreeLowCallback @ref IxHssAccPktRxFreeLowCallback [in] - Pointer to 
- * the clients Rx free buffer request function.  If NULL, assume client will 
- * trigger independently.
- * @param rxFreeLowUserId @ref IxHssAccPktUserId [in] - The client supplied RxFreeLow value
- * to be passed back as an argument to the supplied rxFreeLowCallback
- * @param txDoneCallback @ref IxHssAccPktTxDoneCallback [in] - Pointer to the 
- * clients Tx done callback function
- * @param txDoneUserId @ref IxHssAccPktUserId [in] - The client supplied txDone value
- * to be passed back as an argument to the supplied txDoneCallback
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- *         - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due
- *                          to a resource error
- */
-PUBLIC IX_STATUS 
-ixHssAccPktPortConnect (IxHssAccHssPort hssPortId, 
-			IxHssAccHdlcPort hdlcPortId, 
-			BOOL hdlcFraming, 
-			IxHssAccHdlcMode hdlcMode,
-			BOOL hdlcBitInvert,
-			unsigned blockSizeInWords,
-			UINT32 rawIdleBlockPattern,
-			IxHssAccPktHdlcFraming hdlcTxFraming, 
-			IxHssAccPktHdlcFraming hdlcRxFraming, 
-			unsigned frmFlagStart, 
-			IxHssAccPktRxCallback rxCallback,
-			IxHssAccPktUserId rxUserId, 
-			IxHssAccPktRxFreeLowCallback rxFreeLowCallback, 
-			IxHssAccPktUserId rxFreeLowUserId,
-			IxHssAccPktTxDoneCallback txDoneCallback,
-			IxHssAccPktUserId txDoneUserId);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccPktPortEnable (IxHssAccHssPort hssPortId, 
-           IxHssAccHdlcPort hdlcPortId)
- *
- * @brief This function is responsible for enabling a packetised service
- * for the specified HSS/HDLC port combination. It enables the RX flow. The
- * client must have already connected to a packetised service and is responsible 
- * for ensuring an adequate amount of RX mbufs have been supplied to the access
- * component before enabling the packetised service. This function must be called
- * on a given port before any call to ixHssAccPktPortTx on the same port. 
- * No other HssAccPacketised interface should be called while this interface is 
- * being processed.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1).   
- * @param hdlcPortId @ref IxHssAccHdlcPort [in] - The port id (0,1,2,3) to enable the service
- * on.
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- */
-PUBLIC IX_STATUS 
-ixHssAccPktPortEnable (IxHssAccHssPort hssPortId, 
-		       IxHssAccHdlcPort hdlcPortId);
-
-/**
- * @fn IX_STATUS ixHssAccPktPortDisable (IxHssAccHssPort hssPortId, 
-           IxHssAccHdlcPort hdlcPortId)
- *
- * @brief This function is responsible for disabling a packetised service
- * for the specified HSS/HDLC port combination. It disables the RX flow. 
- * The client must have already connected to and enabled a packetised service 
- * for the specified HDLC port. This disable interface can be called before a
- * disconnect, but is not required to.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- * @param hdlcPortId @ref IxHssAccHdlcPort [in] - The port id (0,1,2,3) to disable 
- * the service on.
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- */
-PUBLIC IX_STATUS 
-ixHssAccPktPortDisable (IxHssAccHssPort hssPortId, 
-			IxHssAccHdlcPort hdlcPortId);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccPktPortDisconnect (IxHssAccHssPort hssPortId, 
-           IxHssAccHdlcPort hdlcPortId)
- *
- * @brief This function is responsible for disconnecting a client from one
- * of the 4 available HDLC ports. It is not required that the Rx Flow 
- * has been disabled before calling this function.  If the RX Flow has not been
- * disabled, the disconnect will disable it before proceeding with the
- * disconnect.  No other HssAccPacketised 
- * interface should be called while this interface is being processed.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port
- * to disconnect and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully 
- *         - IX_HSSACC_PKT_DISCONNECTING The function has initiated the disconnecting
- *                             procedure but it has not completed yet.
- */
-PUBLIC IX_STATUS 
-ixHssAccPktPortDisconnect (IxHssAccHssPort hssPortId, 
-			   IxHssAccHdlcPort hdlcPortId);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn BOOL ixHssAccPktPortIsDisconnectComplete (IxHssAccHssPort hssPortId, 
-           IxHssAccHdlcPort hdlcPortId)
- *
- * @brief This function is called to check if a given HSS/HDLC port 
- * combination is in a connected state or not. This function may be called 
- * at any time to determine a ports state.  No other HssAccPacketised 
- * interface should be called while this interface is being processed.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port
- * to disconnect and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3
- *
- * @return 
- *         - true The state of this HSS/HDLC port combination is disconnected,
- *                so if a disconnect was called, it is now completed.
- *         - false The state of this HSS/HDLC port combination is connected,
- *                so if a disconnect was called, it is not yet completed.
- */
-PUBLIC BOOL 
-ixHssAccPktPortIsDisconnectComplete (IxHssAccHssPort hssPortId, 
-				     IxHssAccHdlcPort hdlcPortId);
-
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccPktPortRxFreeReplenish (IxHssAccHssPort hssPortId, 
-              IxHssAccHdlcPort hdlcPortId, 
-	      IX_OSAL_MBUF *buffer)
- *
- * @brief Function which the client calls at regular intervals to provide
- * mbufs to the access component for RX. A connection should exist for
- * the specified hssPortId/hdlcPortId combination before attempting to call this 
- * interface. Also, the connection should not be in a disconnecting state.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port
- * and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3
- * @param *buffer @ref IX_OSAL_MBUF [in] - A pointer to a free mbuf to filled with payload.
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- *         - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due
- *                          to a resource error
- *         - IX_HSSACC_Q_WRITE_OVERFLOW The function did not succeed due to a Q
- *                                      overflow
- */
-PUBLIC IX_STATUS 
-ixHssAccPktPortRxFreeReplenish (IxHssAccHssPort hssPortId, 
-				IxHssAccHdlcPort hdlcPortId, 
-				IX_OSAL_MBUF *buffer);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccPktPortTx (IxHssAccHssPort hssPortId, 
-    IxHssAccHdlcPort hdlcPortId, 
-    IX_OSAL_MBUF *buffer)
- *
- * @brief Function which the client calls when it wants to transmit
- * packetised data. An enabled connection should exist on the specified
- * hssPortId/hdlcPortId combination before attempting to call this interface.
- * No other HssAccPacketised 
- * interface should be called while this interface is being processed.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port
- * and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3
- * @param *buffer @ref IX_OSAL_MBUF [in] - A pointer to a chain of mbufs which the
- * client has filled with the payload
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- *         - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due
- *                          to a resource error. See note.
- *         - IX_HSSACC_Q_WRITE_OVERFLOW The function did not succeed due to a Q
- *                                      overflow
- *
- * @note IX_HSSACC_RESOURCE_ERR is returned when a free descriptor cannot be
- * obtained to send the chain of mbufs to the NPE.  This is a normal scenario.
- * HssAcc has a pool of descriptors and this error means that they are currently
- * all in use.
- * The recommended approach to this is to retry until a descriptor becomes free
- * and the packet is successfully transmitted.
- * Alternatively, the user could wait until the next IxHssAccPktTxDoneCallback
- * callback is triggered, and then retry, as it is this event that causes a
- * transmit descriptor to be freed. 
- */
-PUBLIC IX_STATUS 
-ixHssAccPktPortTx (IxHssAccHssPort hssPortId, 
-		   IxHssAccHdlcPort hdlcPortId, 
-		   IX_OSAL_MBUF *buffer);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccChanConnect (IxHssAccHssPort hssPortId, 
-           unsigned bytesPerTSTrigger, 
-	   UINT8 *rxCircular, 
-	   unsigned numRxBytesPerTS, 
-	   UINT32 *txPtrList, 
-	   unsigned numTxPtrLists, 
-	   unsigned numTxBytesPerBlk, 
-	   IxHssAccChanRxCallback rxCallback)
- *
- * @brief This function allows the client to connect to the Tx/Rx NPE
- * Channelised Service. There can only be one client per HSS port. The
- * client is responsible for ensuring that the HSS port is configured
- * appropriately before its connect request. No other HssAccChannelised 
- * interface should be called while this interface is being processed.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- * @param bytesPerTSTrigger unsigned [in] - The NPE will trigger the access
- * component after bytesPerTSTrigger have been received for all trunk
- * timeslots. This figure is a multiple of 8 e.g. 8 for 1ms trigger, 16 for
- * 2ms trigger.
- * @param *rxCircular UINT8 [in] - A pointer to memory allocated by the
- * client to be filled by data received. The buffer at this address is part
- * of a pool of buffers to be accessed in a circular fashion. This address
- * will be written to by the NPE. Therefore, it needs to be a physical address.
- * @param numRxBytesPerTS unsigned [in] - The number of bytes allocated per
- * timeslot within the receive memory. This figure will depend on the
- * latency of the system. It needs to be deep enough for data to be read by
- * the client before the NPE re-writes over that memory e.g. if the client
- * samples at a rate of 40bytes per timeslot, numRxBytesPerTS may need to
- * be 40bytes * 3. This would give the client 3 * 5ms of time before
- * received data is over-written.
- * @param *txPtrList UINT32 [in] - The address of an area of contiguous
- * memory allocated by the client to be populated with pointers to data for
- * transmission. Each pointer list contains a pointer per active channel.
- * The txPtrs will point to data to be transmitted by the NPE. Therefore,
- * they must point to physical addresses.
- * @param numTxPtrLists unsigned [in] - The number of pointer lists in
- * txPtrList. This figure is dependent on jitter.
- * @param numTxBytesPerBlk unsigned [in] - The size of the Tx data, in
- * bytes, that each pointer within the PtrList points to.
- * @param rxCallback @ref IxHssAccChanRxCallback [in] - A client function
- * pointer to be called back to handle the actual tx/rx of channelised
- * data. If this is not NULL, an ISR will call this function. If this
- * pointer is NULL, it implies that the client will use a polling mechanism
- * to detect when the tx and rx of channelised data is to occur. The client
- * will use hssChanAccStatus for this.
- *
- * @return
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- */
- 
-PUBLIC IX_STATUS 
-ixHssAccChanConnect (IxHssAccHssPort hssPortId, 
-		     unsigned bytesPerTSTrigger, 
-		     UINT8 *rxCircular, 
-		     unsigned numRxBytesPerTS, 
-		     UINT32 *txPtrList, 
-		     unsigned numTxPtrLists, 
-		     unsigned numTxBytesPerBlk, 
-		     IxHssAccChanRxCallback rxCallback);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccChanPortEnable (IxHssAccHssPort hssPortId)
- *
- * @brief This function is responsible for enabling a channelised service
- * for the specified HSS port. It enables the NPE RX flow. The client must
- * have already connected to a channelised service before enabling the
- * channelised service. No other HssAccChannelised 
- * interface should be called while this interface is being processed.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- *
- * @return
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- */
-PUBLIC IX_STATUS 
-ixHssAccChanPortEnable (IxHssAccHssPort hssPortId);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccChanPortDisable (IxHssAccHssPort hssPortId)
- *
- * @brief This function is responsible for disabling a channelised service
- * for the specified HSS port. It disables the NPE RX flow. The client must
- * have already connected to and enabled a channelised service for the
- * specified HSS port. This disable interface can be called before a
- * disconnect, but is not required to. No other HssAccChannelised 
- * interface should be called while this interface is being processed.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- */
-PUBLIC IX_STATUS 
-ixHssAccChanPortDisable (IxHssAccHssPort hssPortId);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccChanDisconnect (IxHssAccHssPort hssPortId)
- *
- * @brief This function allows the client to Disconnect from a channelised
- * service. If the NPE RX Flow has not been disabled, the disconnect will
- * disable it before proceeding with other disconnect functionality.
- * No other HssAccChannelised interface should be called while this 
- * interface is being processed.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- */
-PUBLIC IX_STATUS 
-ixHssAccChanDisconnect (IxHssAccHssPort hssPortId);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn IX_STATUS ixHssAccChanStatusQuery (IxHssAccHssPort hssPortId, 
-           BOOL *dataRecvd, 
-	   unsigned *rxOffset, 
-	   unsigned *txOffset, 
-	   unsigned *numHssErrs)
- *
- * @brief This function is called by the client to query whether or not
- * channelised data has been received. If there is, hssChanAcc will return
- * the details in the output parameters. An enabled connection should
- * exist on the specified hssPortId before attempting to call this interface.  
- * No other HssAccChannelised interface should be called while this 
- * interface is being processed.
- *
- * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two
- * identical ports (0-1). 
- * @param *dataRecvd BOOL [out] - This BOOL indicates to the client whether
- * or not the access component has read any data for the client. If
- * false, the other output parameters will not have been written to.
- * @param *rxOffset unsigned [out] - An offset to indicate to the client
- * where within the receive buffers the NPE has just written the received
- * data to.
- * @param *txOffset unsigned [out] - An offset to indicate to the client
- * from where within the txPtrList the NPE is currently transmitting from
- * @param *numHssErrs unsigned [out] - The total number of HSS port errors
- * since initial port configuration
- *
- *
- * @return 
- *         - IX_SUCCESS The function executed successfully
- *         - IX_FAIL The function did not execute successfully
- *         - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a
- *                          parameter error
- */
-PUBLIC IX_STATUS 
-ixHssAccChanStatusQuery (IxHssAccHssPort hssPortId, 
-			 BOOL *dataRecvd, 
-			 unsigned *rxOffset, 
-			 unsigned *txOffset, 
-			 unsigned *numHssErrs);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn void ixHssAccShow (void)
- *
- * @brief This function will display the current state of the IxHssAcc
- * component. The output is sent to stdout.
- *
- * @return void
- */
-PUBLIC void 
-ixHssAccShow (void);
-
-/**
- *
- * @ingroup IxHssAccAPI
- *
- * @fn void ixHssAccStatsInit (void)
- *
- * @brief This function will reset the IxHssAcc statistics.
- *
- * @return void
- */
-PUBLIC void 
-ixHssAccStatsInit (void);
-
-#endif /* IXHSSACC_H */
-
-/**
- * @} defgroup IxHssAcc
- */
diff --git a/drivers/net/npe/include/IxI2cDrv.h b/drivers/net/npe/include/IxI2cDrv.h
deleted file mode 100644
index 0331540..0000000
--- a/drivers/net/npe/include/IxI2cDrv.h
+++ /dev/null
@@ -1,843 +0,0 @@
-/**
- * @file IxI2cDrv.h
- *
- * @brief  Header file for the IXP400 I2C Driver (IxI2cDrv)
- *
- * @version $Revision: 0.1 $
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxI2cDrv IXP400 I2C Driver(IxI2cDrv) API 
- *
- * @brief IXP400 I2C Driver Public API
- *
- * @{
- */
-#ifndef IXI2CDRV_H
-#define IXI2CDRV_H
-
-#ifdef __ixp46X
-#include "IxOsal.h"
-
-/*
- * Section for #define
- */
-
-/**
- * @ingroup IxI2cDrv
- * @brief The interval of micro/mili seconds the IXP will wait before it polls for
- *			status from the ixI2cIntrXferStatus; Every 20us is 1 byte @
- *			400Kbps and 4 bytes	@ 100Kbps. This is dependent on delay type selected
- *          through the API ixI2cDrvDelayTypeSelect.
- */
-#define IX_I2C_US_POLL_FOR_XFER_STATUS	20
-
-/**
- * @ingroup IxI2cDrv
- * @brief The number of tries that will be attempted to call a callback
- *          function if the callback does not or is unable to resolve the
- *          issue it is called to resolve
- */
-#define IX_I2C_NUM_OF_TRIES_TO_CALL_CALLBACK_FUNC	10
-
-
-/**
- * @ingroup IxI2cDrv
- * @brief Number of tries slave will poll the IDBR Rx full bit before it
- *			gives up
- */
-#define IX_I2C_NUM_TO_POLL_IDBR_RX_FULL 0x100
-
-/**
- * @ingroup IxI2cDrv
- * @brief Number of tries slave will poll the IDBR Tx empty bit before it
- *			gives up
- */
-#define IX_I2C_NUM_TO_POLL_IDBR_TX_EMPTY 0x100
-
-/*
- * Section for enum
- */
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @enum IxI2cMasterStatus
- *
- * @brief The master status - transfer complete, bus error or arbitration loss
- */
-typedef enum
-{
-    IX_I2C_MASTER_XFER_COMPLETE = IX_SUCCESS,
-	IX_I2C_MASTER_XFER_BUS_ERROR,
-	IX_I2C_MASTER_XFER_ARB_LOSS
-} IxI2cMasterStatus;
-
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @enum IX_I2C_STATUS
- *
- * @brief The status that can be returned in a I2C driver initialization
- */
-typedef enum
-{
-	IX_I2C_SUCCESS = IX_SUCCESS, /**< Success status */
-	IX_I2C_FAIL, /**< Fail status */
-	IX_I2C_NOT_SUPPORTED, /**< hardware does not have dedicated I2C hardware */
-	IX_I2C_NULL_POINTER, /**< parameter passed in is NULL */
-	IX_I2C_INVALID_SPEED_MODE_ENUM_VALUE, /**< speed mode selected is invalid */
-	IX_I2C_INVALID_FLOW_MODE_ENUM_VALUE, /**< flow mode selected is invalid */
-	IX_I2C_SLAVE_ADDR_CB_MISSING, /**< slave callback is NULL */
-	IX_I2C_GEN_CALL_CB_MISSING, /**< general callback is NULL */
-	IX_I2C_INVALID_SLAVE_ADDR, /**< invalid slave address specified */
-	IX_I2C_INT_BIND_FAIL, /**< interrupt bind fail */
-	IX_I2C_INT_UNBIND_FAIL, /**< interrupt unbind fail */
-	IX_I2C_NOT_INIT, /**< I2C is not initialized yet */
-	IX_I2C_MASTER_BUS_BUSY, /**< master detected a I2C bus busy */
-	IX_I2C_MASTER_ARB_LOSS, /**< master experienced arbitration loss */
-	IX_I2C_MASTER_XFER_ERROR, /**< master experienced a transfer error */
-	IX_I2C_MASTER_BUS_ERROR, /**< master detected a I2C bus error */
-	IX_I2C_MASTER_NO_BUFFER, /**< no buffer provided for master transfer */
-	IX_I2C_MASTER_INVALID_XFER_MODE, /**< xfer mode selected is invalid */
-	IX_I2C_SLAVE_ADDR_NOT_DETECTED, /**< polled slave addr not detected */
-	IX_I2C_GEN_CALL_ADDR_DETECTED, /**< polling detected general call */
-	IX_I2C_SLAVE_READ_DETECTED, /**< polling detected slave read request */
-	IX_I2C_SLAVE_WRITE_DETECTED, /**< polling detected slave write request */
-	IX_I2C_SLAVE_NO_BUFFER, /**< no buffer provided for slave transfers */
-	IX_I2C_DATA_SIZE_ZERO, /**< data size transfer is zero - invalid */
-	IX_I2C_SLAVE_WRITE_BUFFER_EMPTY, /**< slave buffer is used till empty */
-	IX_I2C_SLAVE_WRITE_ERROR, /**< slave write experienced an error */
-	IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL, /**< slave buffer is filled up */
-	IX_I2C_SLAVE_OR_GEN_READ_ERROR /**< slave read experienced an error */
-} IX_I2C_STATUS;
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @enum IxI2cSpeedMode
- *
- * @brief Type of speed modes supported by the I2C hardware.
- */
-typedef enum
-{
-    IX_I2C_NORMAL_MODE = 0x0,
-    IX_I2C_FAST_MODE
-} IxI2cSpeedMode;
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @enum IxI2cXferMode
- *
- * @brief Used for indicating it is a repeated start or normal transfer
- */
-typedef enum
-{
-    IX_I2C_NORMAL = 0x0,
-    IX_I2C_REPEATED_START
-} IxI2cXferMode;
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @enum IxI2cFlowMode
- *
- * @brief Used for indicating it is a poll or interrupt mode
- */
-typedef enum
-{
-    IX_I2C_POLL_MODE = 0x0,
-    IX_I2C_INTERRUPT_MODE
-} IxI2cFlowMode;
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @enum IxI2cDelayMode
- *
- * @brief Used for selecting looping delay or OS scheduler delay
- */
-typedef enum
-{
-    IX_I2C_LOOP_DELAY = 1,  /**< delay in microseconds */
-    IX_I2C_SCHED_DELAY      /**< delay in miliseconds */
-} IxI2cDelayMode;
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @brief The pointer to the function that will be called when the master
- *			has completed its receive. The parameter that is passed will
- *			provide the status of the read (success, arb loss, or bus
- *			error), the transfer mode (normal or repeated start, the
- *			buffer pointer and number of bytes transferred.
- */
-typedef void (*IxI2cMasterReadCallbackP)(IxI2cMasterStatus, IxI2cXferMode, char*, UINT32);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @brief The pointer to the function that will	be called when the master
- *			has completed its transmit. The parameter that is passed will
- *			provide the status of the write (success, arb loss, or buss
- *			error), the transfer mode (normal or repeated start), the
- *			buffer pointer and number of bytes transferred.
- */
-typedef void (*IxI2cMasterWriteCallbackP)(IxI2cMasterStatus, IxI2cXferMode, char*, UINT32);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @brief The pointer to the function that will be called when a slave
- *			address detected in interrupt mode for a read. The parameters
- *			that is passed will provide the read status, buffer pointer,
- *			buffer size, and the bytes received. When a start of a read
- *			is initiated there will be no buffer allocated and this callback
- *			will be called to request for a buffer. While receiving, if the
- *			buffer gets filled, this callback will be called to request for
- *			a new buffer while sending the filled buffer's pointer and size,
- *			and data size received. When the receive is complete, this
- *			callback will be called to process the data and free the memory
- *			by passing the buffer's pointer and size, and data size received.
- */
-typedef void (*IxI2cSlaveReadCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @brief The pointer to the function that will be called when a slave
- *			address detected in interrupt mode for a write. The parameters
- *			that is passed will provide the write status, buffer pointer,
- *			buffer size, and the bytes received. When a start of a write is
- *			initiated there will be no buffer allocated and this callback
- *			will be called to request for a buffer and to fill it with data.
- *			While transmitting, if the data in the buffer empties, this
- *			callback will be called to request for more data to be filled in
- *			the same or new buffer. When the transmit is complete, this
- *			callback will be called to free the memory or other actions to
- *			be taken.
- */
-typedef void (*IxI2cSlaveWriteCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @brief The pointer to the function that will be called when a general
- *			call detected in interrupt mode for a read. The parameters that
- *			is passed will provide the read status, buffer pointer, buffer
- *			size, and the bytes received. When a start of a read is
- *			initiated there will be no buffer allocated and this callback
- *			will be called to request for a buffer. While receiving, if the
- *			buffer gets filled, this callback will be called to request for
- *			a new buffer while sending the filled buffer's pointer and size,
- *			and data size received. When the receive is complete, this
- *			callback will be called to process the data and free the memory
- *			by passing the buffer's pointer and size, and data size received.
- */
-typedef void (*IxI2cGenCallCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32);
-
-/*
- * Section for struct
- */
-
-/**
- * @brief contains all the variables required to initialize the I2C unit
- * 
- * Structure to be filled and used for calling initialization
- */
-typedef struct
-{
-	IxI2cSpeedMode I2cSpeedSelect;	/**<Select either normal (100kbps)
-									or fast mode (400kbps)*/
-	IxI2cFlowMode I2cFlowSelect;	/**<Select interrupt or poll mode*/	
-	IxI2cMasterReadCallbackP MasterReadCBP;
-									/**<The master read callback pointer */
-	IxI2cMasterWriteCallbackP MasterWriteCBP;
-									/**<The master write callback pointer */
-	IxI2cSlaveReadCallbackP SlaveReadCBP;
-									/**<The slave read callback pointer */
-	IxI2cSlaveWriteCallbackP SlaveWriteCBP;
-									/**<The slave write callback pointer */
-	IxI2cGenCallCallbackP GenCallCBP;
-									/**<The general call callback pointer */
-	BOOL I2cGenCallResponseEnable;	/**<Enable/disable the unit to
-									respond to generall calls.*/
-	BOOL I2cSlaveAddrResponseEnable;/**<Enable/disable the unit to
-									respond to the slave address set in
-									ISAR*/
-	BOOL SCLEnable;					/**<Enable/disable the unit from
-									driving the SCL line during master
-									mode operation*/
-	UINT8 I2cHWAddr;				/**<The address the unit will
-									response to as a slave device*/
-} IxI2cInitVars;
-
-/**
- * @brief contains results of counters and their overflow
- * 
- * Structure contains all values of counters and associated overflows.
- */
-typedef struct
-{
-	UINT32 ixI2cMasterXmitCounter;			/**<Total bytes transmitted as
-											master.*/
-	UINT32 ixI2cMasterFailedXmitCounter;	/**<Total bytes failed for
-											transmission as master.*/
-	UINT32 ixI2cMasterRcvCounter;			/**<Total bytes received as
-											master.*/
-	UINT32 ixI2cMasterFailedRcvCounter;		/**<Total bytes failed for
-											receival as master.*/
-	UINT32 ixI2cSlaveXmitCounter;			/**<Total bytes transmitted as
-											slave.*/
-	UINT32 ixI2cSlaveFailedXmitCounter;		/**<Total bytes failed for
-											transmission as slave.*/
-	UINT32 ixI2cSlaveRcvCounter;			/**<Total bytes received as
-											slave.*/
-	UINT32 ixI2cSlaveFailedRcvCounter;		/**<Total bytes failed for
-											receival as slave.*/
-	UINT32 ixI2cGenAddrCallSucceedCounter;	/**<Total bytes successfully
-											transmitted for general address.*/
-	UINT32 ixI2cGenAddrCallFailedCounter;	/**<Total bytes failed transmission
-											for general address.*/
-	UINT32 ixI2cArbLossCounter;				/**<Total instances of arbitration
-											loss has occured.*/
-} IxI2cStatsCounters;
-
-
-/*
- * Section for prototypes interface functions
- */
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvInit(
-	IxI2cInitVars *InitVarsSelected)
- *
- * @brief Initializes the I2C Driver.
- *
- * @param "IxI2cInitVars [in] *InitVarsSelected" - struct containing required
- *			variables for initialization 
- *
- * Global Data	:
- *		- None.
- *
- * This API will check if the hardware supports this I2C driver and the validity
- * of the parameters passed in. It will continue to process the parameters
- * passed in by setting the speed of the I2C unit (100kbps or 400kbps), setting
- * the flow to either interrupt or poll mode, setting the address of the I2C unit,
- * enabling/disabling the respond to General Calls, enabling/disabling the respond
- * to Slave Address and SCL line driving. If it is interrupt mode, then it will
- * register the callback routines for master, slavetransfer and general call receive.
- *
- * @return 
- *      - IX_I2C_SUCCESS - Successfully initialize and enable the I2C
- *							hardware.
- *		- IX_I2C_NOT_SUPPORTED - The hardware does not support or have a
- *                              dedicated I2C unit to support this driver
- *		- IX_I2C_NULL_POINTER - The parameter passed in is a NULL pointed
- *		- IX_I2C_INVALID_SPEED_MODE_ENUM_VALUE - The speed mode selected in the
- *												InitVarsSelected is invalid
- *		- IX_I2C_INVALID_FLOW_MODE_ENUM_VALUE - The flow mode selected in the
- *												InitVarsSelected is invalid
- *		- IX_I2C_INVALID_SLAVE_ADDR - The address 0x0 is reserved for
- *										general call.
- *		- IX_I2C_SLAVE_ADDR_CB_MISSING - interrupt mode is selected but
- *										slave address callback pointer is NULL
- *		- IX_I2C_GEN_CALL_CB_MISSING - interrupt mode is selected but
- *										general call callback pointer is NULL
- *		- IX_I2C_INT_BIND_FAIL - The ISR for the I2C failed to bind
- *		- IX_I2C_INT_UNBIND_FAIL - The ISR for the I2C failed to unbind
- *
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvInit(IxI2cInitVars *InitVarsSelected);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvUninit(
-	void)
- *
- * @brief Disables the I2C hardware
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will disable the I2C hardware, unbind interrupt, and unmap memory.
- *
- * @return 
- *      - IX_I2C_SUCCESS - successfully un-initialized I2C
- *		- IX_I2C_INT_UNBIND_FAIL - failed to unbind the I2C interrupt
- *		- IX_I2C_NOT_INIT - I2C not init yet.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvUninit(void);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvSlaveAddrSet(
-	UINT8 SlaveAddrSet)
- *
- * @brief Sets the I2C Slave Address
- *
- * @param "UINT8 [in] SlaveAddrSet" - Slave Address to be inserted into ISAR
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will insert the SlaveAddrSet into the ISAR.
- *
- * @return 
- *      - IX_I2C_SUCCESS - successfuly set the slave addr
- *		- IX_I2C_INVALID_SLAVE_ADDR - invalid slave address (zero) specified
- *		- IX_I2C_NOT_INIT - I2C not init yet.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvSlaveAddrSet(UINT8 SlaveAddrSet);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvBusScan(
-	void)
- *
- * @brief scans the I2C bus for slave devices
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will prompt all slave addresses for a reply except its own
- *
- * @return 
- *      - IX_I2C_SUCCESS - found at least one slave device
- *		- IX_I2C_FAIL - Fail to find even one slave device
- *		- IX_I2C_BUS_BUSY - The I2C bus is busy (held by another I2C master)
- *		- IX_I2C_ARB_LOSS - The I2C bus was loss to another I2C master
- *		- IX_I2C_NOT_INIT - I2C not init yet.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvBusScan(void);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvWriteTransfer(
-	UINT8 SlaveAddr,
-	char *bufP,
-	UINT32 dataSize,
-	IxI2cXferMode XferModeSelect)
- *
- * @param "UINT8 [in] SlaveAddr" - The slave address to request data from.
- * @param "char [in] *bufP" - The pointer to the data to be transmitted.
- * @param "UINT32 [in] dataSize" - The number of bytes requested.
- * @param "IxI2cXferMode [in] XferModeSelect" - the transfer mode selected,
- *			either repeated start (ends w/o stop) or normal (start and stop)
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will try to obtain master control of the I2C bus and transmit the
- * number of bytes, specified by dataSize, to the user specified slave
- * address from the buffer pointer. It will use either interrupt or poll mode
- * depending on the method selected. 
- *
- * If in interrupt mode and IxI2cMasterWriteCallbackP is not NULL, the driver
- * will initiate the transfer and return immediately. The function pointed to
- * by IxI2cMasterWriteCallbackP will be called in the interrupt service
- * handlers when the operation is complete.
- *
- * If in interrupt mode and IxI2cMasterWriteCallbackP is NULL, then the driver
- * will wait for the operation to complete, and then return.
- *
- * And if the repeated start transfer mode is selected, then it will not send a
- * stop signal at the end of all the transfers.
- * *NOTE*: If repeated start transfer mode is selected, it has to end with a
- *			normal mode transfer mode else the bus will continue to be held
- *			by the IXP.
- *
- * @return 
- *      - IX_I2C_SUCCESS - Successfuuly wrote data to slave.
- *		- IX_I2C_MASTER_BUS_BUSY - The I2C bus is busy (held by another I2C master)
- *		- IX_I2C_MASTER_ARB_LOSS - The I2C bus was loss to another I2C master
- *		- IX_I2C_MASTER_XFER_ERROR - There was a transfer error
- *      - IX_I2C_MASTER_BUS_ERROR - There was a bus error during transfer
- *		- IX_I2C_MASTER_NO_BUFFER - buffer pointer is NULL
- *      - IX_I2C_MASTER_INVALID_XFER_MODE - Xfer mode selected is invalid
- *      - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid
- *		- IX_I2C_NOT_INIT - I2C not init yet.
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvWriteTransfer(
-	UINT8 SlaveAddr,
-	char *bufP,
-	UINT32 dataSize,
-	IxI2cXferMode XferModeSelect);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvReadTransfer(
-	UINT8 SlaveAddr,
-	char *bufP,
-	UINT32 dataSize,
-	IxI2cXferMode XferModeSelect)
- *
- * @brief Initiates a transfer to receive bytes of data from a slave
- *			device through the I2C bus.
- *
- * @param "UINT8 [in] SlaveAddr" - The slave address to request data from.
- * @param "char [out] *bufP" - The pointer to the buffer to store the
- *			requested data.
- * @param "UINT32 [in] dataSize" - The number of bytes requested.
- * @param "IxI2cXferMode [in] XferModeSelect" - the transfer mode selected,
- *			either repeated start (ends w/o stop) or normal (start and stop)
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will try to obtain master control of the I2C bus and receive the
- * number of bytes, specified by dataSize, from the user specified address
- * into the receive buffer. It will use either interrupt or poll mode depending
- * on the mode selected.
- *
- * If in interrupt mode and IxI2cMasterReadCallbackP is not NULL, the driver
- * will initiate the transfer and return immediately. The function pointed to
- * by IxI2cMasterReadCallbackP will be called in the interrupt service
- * handlers when the operation is complete.
- *
- * If in interrupt mode and IxI2cMasterReadCallbackP is NULL, then the driver will
- * wait for the operation to complete, and then return.
- *
- * And if the repeated start transfer mode is selected, then it will not send a
- * stop signal at the end of all the transfers.
- * *NOTE*: If repeated start transfer mode is selected, it has to end with a
- *			normal mode transfer mode else the bus will continue to be held
- *			by the IXP.
- *
- * @return 
- *      - IX_I2C_SUCCESS - Successfuuly read slave data
- *		- IX_I2C_MASTER_BUS_BUSY - The I2C bus is busy (held by another I2C master)
- *		- IX_I2C_MASTER_ARB_LOSS - The I2C bus was loss to another I2C master
- *		- IX_I2C_MASTER_XFER_ERROR - There was a bus error during transfer
- *      - IX_I2C_MASTER_BUS_ERROR - There was a bus error during transfer
- *		- IX_I2C_MASTER_NO_BUFFER - buffer pointer is NULL
- *      - IX_I2C_MASTER_INVALID_XFER_MODE - Xfer mode selected is invalid
- *      - IX_I2C_INVALID_SLAVE_ADDR - invalid slave address (zero) specified
- *      - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid
- *		- IX_I2C_NOT_INIT - I2C not init yet.
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvReadTransfer(
-	UINT8 SlaveAddr,
-	char *bufP,
-	UINT32 dataSize,
-	IxI2cXferMode XferModeSelect);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvSlaveAddrAndGenCallDetectedCheck(
-	void)
- *
- * @brief Checks the I2C Status Register to determine if a slave address is
- *			detected
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API is used in polled mode to determine if the I2C unit is requested
- * for a slave or general call transfer. If it is requested for a slave
- * transfer then it will determine if it is a general call (read only), read,
- * or write transfer requested.
- *
- * @return 
- *      - IX_I2C_SLAVE_ADDR_NOT_DETECTED - The I2C unit is not requested for slave
- *										transfer
- *		- IX_I2C_GEN_CALL_ADDR_DETECTED - The I2C unit is not requested for slave
- *									transfer but for general call
- *      - IX_I2C_SLAVE_READ_DETECTED - The I2C unit is requested for a read
- *      - IX_I2C_SLAVE_WRITE_DETECTED - The I2C unit is requested for a write
- *		- IX_I2C_NOT_INIT - I2C not init yet.
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvSlaveAddrAndGenCallDetectedCheck(void);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvSlaveOrGenDataReceive(
-	char *bufP,
-	UINT32 bufSize,
-	UINT32 *dataSizeRcvd)
- *
- * @brief Performs the slave receive or general call receive data transfer
- *
- * @param	"char [in] *bufP" - the pointer to the buffer to store data
- *			"UINT32 [in] bufSize" - the buffer size allocated
- *			"UINT32 [in] *dataSizeRcvd" - the length of data received in bytes
- *
- * Global Data	:
- *		- None.
- *                        
- * This API is only used in polled mode to perform the slave read or general call
- * receive data. It will continuously store the data received into bufP until
- * complete or until bufP is full in which it will return
- * IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL. If in interrupt mode, the callback will be
- * used.
- *
- * @return 
- *      - IX_I2C_SUCCESS - The I2C driver transferred the data successfully.
- *		- IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL - The I2C driver has ran out of
- *			space to store the received data.
- *		- IX_I2C_SLAVE_OR_GEN_READ_ERROR - The I2C driver didn't manage to
- *			detect the IDBR Rx Full bit
- *      - IX_I2C_DATA_SIZE_ZERO - bufSize passed in is zero, which is invalid
- *		- IX_I2C_SLAVE_NO_BUFFER - buffer pointer is NULL
- *      - IX_I2C_NULL_POINTER - dataSizeRcvd is NULL
- *		- IX_I2C_NOT_INIT - I2C not init yet.
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvSlaveOrGenDataReceive(
-	char *bufP,
-	UINT32 bufSize,
-	UINT32 *dataSizeRcvd);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvSlaveDataTransmit(
-	char *bufP,
-	UINT32 dataSize,
-	UINT32 *dataSizeXmtd)
- *
- * @brief Performs the slave write data transfer
- *
- * @param	"char [in] *bufP" - the pointer to the buffer for data to be
- *				transmitted
- *			"UINT32 [in] bufSize" - the buffer size allocated
- *			"UINT32 [in] *dataSizeRcvd" - the length of data trasnmitted in
- *				bytes
- *
- * Global Data	:
- *		- None.
- *                        
- * This API is only used in polled mode to perform the slave transmit data. It
- * will continuously transmit the data from bufP until complete or until bufP
- * is empty in which it will return IX_I2C_SLAVE_WRITE_BUFFER_EMPTY. If in
- * interrupt mode, the callback will be used.
- *
- * @return 
- *      - IX_I2C_SUCCESS - The I2C driver transferred the data successfully.
- *      - IX_I2C_SLAVE_WRITE_BUFFER_EMPTY - The I2C driver needs more data to
- *			transmit.
- *      - IX_I2C_SLAVE_WRITE_ERROR -The I2C driver didn't manage to detect the
- *          IDBR Tx empty bit or the slave stop bit.
- *      - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid
- *		- IX_I2C_SLAVE_NO_BUFFER - buffer pointer is NULL
- *      - IX_I2C_NULL_POINTER - dataSizeXmtd is NULL
- *		- IX_I2C_NOT_INIT - I2C not init yet.
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvSlaveDataTransmit(
-	char *bufP,
-	UINT32 dataSize,
-	UINT32 *dataSizeXmtd);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvSlaveOrGenCallBufReplenish(
-	char *bufP,
-	UINT32 bufSize)
- *
- * @brief Replenishes the buffer which stores buffer info for both slave and
- *			general call
- *
- * @param	"char [in] *bufP" - pointer to the buffer allocated
- *			"UINT32 [in] bufSize" - size of the buffer
- *
- * Global Data	:
- *		- None.
- *                        
- * This API is only used in interrupt mode for replenishing the same buffer
- * that is used by both slave and generall call by updating the buffer info
- * with new info and clearing previous offsets set by previous transfers.
- *
- * @return 
- *      - None
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC void
-ixI2cDrvSlaveOrGenCallBufReplenish(
-	char *bufP,
-	UINT32 bufSize);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvStatsGet(IxI2cStatsCounters *I2cStats)
- *
- * @brief Returns the I2C Statistics through the pointer passed in
- *
- * @param - "IxI2cStatsCounters [out] *I2cStats" - I2C statistics counter will
- *			be read and written to the location pointed by this pointer.
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will return the statistics counters of the I2C driver.
- *
- * @return 
- *      - IX_I2C_NULL_POINTER - pointer passed in is NULL
- *		- IX_I2C_SUCCESS - successfully obtained I2C statistics
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : no
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvStatsGet(IxI2cStatsCounters *I2cStats);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvStatsReset(void)
- *
- * @brief Reset I2C statistics counters.
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will reset the statistics counters of the I2C driver.
- *
- * @return 
- *      - None
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : no
- *
- */
-PUBLIC void
-ixI2cDrvStatsReset(void);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvShow(void)
- *
- * @brief Displays the I2C status register and the statistics counter.
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will display the I2C Status register and is useful if any error
- * occurs. It displays the detection of bus error, slave address, general call,
- * address, IDBR receive full, IDBR transmit empty, arbitration loss, slave
- * STOP signal, I2C bus busy, unit busy, ack/nack, and read/write mode. It will
- * also call the ixI2cDrvGetStats and then display the statistics counter.
- *
- * @return 
- *		- IX_I2C_SUCCESS - successfully displayed statistics and status register
- *		- IX_I2C_NOT_INIT - I2C not init yet.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : no
- *
- */
-PUBLIC IX_I2C_STATUS
-ixI2cDrvShow(void);
-
-/**
- * @ingroup IxI2cDrv
- * 
- * @fn ixI2cDrvDelayTypeSelect (IxI2cDelayMode delayMechanismSelect)
- *
- * @brief Sets the delay type of either looping delay or OS scheduler delay
- *          according to the argument provided.
- *
- * @param - "IxI2cDelayMode [in] delayTypeSelect" - the I2C delay type selected
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will set the delay type used by the I2C Driver to either looping
- * delay or OS scheduler delay.
- *
- * @return 
- *		- None
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : no
- *
- */
-PUBLIC void
-ixI2cDrvDelayTypeSelect (IxI2cDelayMode delayTypeSelect);
-
-#endif /* __ixp46X */
-#endif /* IXI2CDRV_H */
diff --git a/drivers/net/npe/include/IxNpeA.h b/drivers/net/npe/include/IxNpeA.h
deleted file mode 100644
index e145b43..0000000
--- a/drivers/net/npe/include/IxNpeA.h
+++ /dev/null
@@ -1,758 +0,0 @@
-#ifndef __doxygen_HIDE  /* This file is not part of the API */
-
-/**
- * @file    IxNpeA.h
- *
- * @date    22-Mar-2002
- *
- * @brief   Header file for the IXP400 ATM NPE API
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxNpeA IXP400 NPE-A (IxNpeA) API
- *
- * @brief The Public API for the IXP400 NPE-A
- *
- * @{
- */
-
-#ifndef IX_NPE_A_H
-#define IX_NPE_A_H
-
-#include "IxQMgr.h"
-#include "IxOsal.h"
-#include "IxQueueAssignments.h"
-
-/* General Message Ids */
-
-/* ATM Message Ids */
-
-/**
- * @def IX_NPE_A_MSSG_ATM_UTOPIA_CONFIG_WRITE
- *
- * @brief ATM Message ID command to write the data to the offset in the
- * Utopia Configuration Table
- */
-#define IX_NPE_A_MSSG_ATM_UTOPIA_CONFIG_WRITE       0x20
-
-/**
- * @def IX_NPE_A_MSSG_ATM_UTOPIA_CONFIG_LOAD
- *
- * @brief ATM Message ID command triggers the NPE to copy the Utopia
- * Configuration Table to the Utopia coprocessor
- */
-#define IX_NPE_A_MSSG_ATM_UTOPIA_CONFIG_LOAD        0x21
-
-/**
- * @def IX_NPE_A_MSSG_ATM_UTOPIA_STATUS_UPLOAD
- *
- * @brief ATM Message ID command triggers the NPE to read-back the Utopia
- * status registers and update the Utopia Status Table.
- */
-#define IX_NPE_A_MSSG_ATM_UTOPIA_STATUS_UPLOAD      0x22
-
-/**
- * @def IX_NPE_A_MSSG_ATM_UTOPIA_STATUS_READ
- *
- * @brief ATM Message ID command to read the Utopia Status Table at the
- * specified offset.
- */
-#define IX_NPE_A_MSSG_ATM_UTOPIA_STATUS_READ        0x23
-
-/**
- * @def IX_NPE_A_MSSG_ATM_TX_ENABLE
- *
- * @brief ATM Message ID command triggers the NPE to re-enable processing
- * of any entries on the TxVcQ for this port.
- *
- * This command will be ignored for a port already enabled
- */
-#define IX_NPE_A_MSSG_ATM_TX_ENABLE                 0x25
-
- /**
- * @def IX_NPE_A_MSSG_ATM_TX_DISABLE
- *
- * @brief ATM Message ID command triggers the NPE to disable processing on
- * this port
- *
- * This command will be ignored for a port already disabled
- */
-#define IX_NPE_A_MSSG_ATM_TX_DISABLE                0x26
-
-/**
- * @def IX_NPE_A_MSSG_ATM_RX_ENABLE
- *
- * @brief ATM Message ID command triggers the NPE to process any received
- * cells for this VC according to the VC Lookup Table.
- *
- * Re-issuing this command with different contents for a VC that is not
- * disabled will cause unpredictable behavior.
- */
-#define IX_NPE_A_MSSG_ATM_RX_ENABLE                 0x27
-
-/**
- * @def IX_NPE_A_MSSG_ATM_RX_DISABLE
- *
- * @brief ATM Message ID command triggers the NPE to disable processing for
- * this VC.
- *
- * This command will be ignored for a VC already disabled
- */
-#define IX_NPE_A_MSSG_ATM_RX_DISABLE                0x28
-
-/**
- * @def IX_NPE_A_MSSG_ATM_STATUS_READ
- *
- * @brief ATM Message ID command to read the ATM status. The data is returned via
- * a response message
- */
-#define IX_NPE_A_MSSG_ATM_STATUS_READ               0x29
-
-/*--------------------------------------------------------------------------
- * HSS Message IDs
- *--------------------------------------------------------------------------*/
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PORT_CONFIG_WRITE
- *
- * @brief HSS Message ID command writes the ConfigWord value to the location
- * in the HSS_CONFIG_TABLE specified by offset for HSS port hPort.
- */
-#define IX_NPE_A_MSSG_HSS_PORT_CONFIG_WRITE         0x40
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PORT_CONFIG_LOAD
- *
- * @brief HSS Message ID command triggers the NPE to copy the contents of the
- * HSS Configuration Table to the appropriate configuration registers in the
- * HSS coprocessor for the port specified by hPort.
- */
-#define IX_NPE_A_MSSG_HSS_PORT_CONFIG_LOAD          0x41
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PORT_ERROR_READ
- *
- * @brief HSS Message ID command triggers the NPE to return an HssErrorReadResponse
- * message for HSS port hPort.
- */
-#define IX_NPE_A_MSSG_HSS_PORT_ERROR_READ           0x42
-
-/**
- * @def IX_NPE_A_MSSG_HSS_CHAN_FLOW_ENABLE
- *
- * @brief HSS Message ID command triggers the NPE to reset internal status and
- * enable the HssChannelized operation on the HSS port specified by hPort.
- */
-#define IX_NPE_A_MSSG_HSS_CHAN_FLOW_ENABLE          0x43
-
-/**
- * @def IX_NPE_A_MSSG_HSS_CHAN_FLOW_DISABLE
- *
- * @brief HSS Message ID command triggers the NPE to disable the HssChannelized
- * operation on the HSS port specified by hPort.
- */
-#define IX_NPE_A_MSSG_HSS_CHAN_FLOW_DISABLE         0x44
-
-/**
- * @def  IX_NPE_A_MSSG_HSS_CHAN_IDLE_PATTERN_WRITE
- *
- * @brief HSS Message ID command writes the HSSnC_IDLE_PATTERN value for HSS
- * port hPort. (n=hPort)
- */
-#define IX_NPE_A_MSSG_HSS_CHAN_IDLE_PATTERN_WRITE   0x45
-
-/**
- * @def IX_NPE_A_MSSG_HSS_CHAN_NUM_CHANS_WRITE
- *
- * @brief HSS Message ID command writes the HSSnC_NUM_CHANNELS value for HSS
- * port hPort. (n=hPort)
- */
-#define IX_NPE_A_MSSG_HSS_CHAN_NUM_CHANS_WRITE      0x46
-
-/**
- * @def IX_NPE_A_MSSG_HSS_CHAN_RX_BUF_ADDR_WRITE
- *
- * @brief HSS Message ID command writes the HSSnC_RX_BUF_ADDR value for HSS
- * port hPort. (n=hPort)
- */
-#define IX_NPE_A_MSSG_HSS_CHAN_RX_BUF_ADDR_WRITE    0x47
-
-/**
- * @def IX_NPE_A_MSSG_HSS_CHAN_RX_BUF_CFG_WRITE
- *
- * @brief HSS Message ID command  writes the HSSnC_RX_BUF_SIZEB and
- * HSSnC_RX_TRIG_PERIOD values for HSS port hPort.  (n=hPort)
- */
-#define IX_NPE_A_MSSG_HSS_CHAN_RX_BUF_CFG_WRITE     0x48
-
-/**
- * @def IX_NPE_A_MSSG_HSS_CHAN_TX_BLK_CFG_WRITE
- *
- * @brief HSS Message ID command writes the HSSnC_TX_BLK1_SIZEB,
- * HSSnC_TX_BLK1_SIZEW, HSSnC_TX_BLK2_SIZEB, and HSSnC_TX_BLK2_SIZEW  values
- * for HSS port hPort. (n=hPort)
- */
-#define IX_NPE_A_MSSG_HSS_CHAN_TX_BLK_CFG_WRITE     0x49
-
-/**
- * @def IX_NPE_A_MSSG_HSS_CHAN_TX_BUF_ADDR_WRITE
- * @brief HSS Message ID command writes the HSSnC_TX_BUF_ADDR value for HSS
- * port hPort. (n=hPort)
- */
-#define IX_NPE_A_MSSG_HSS_CHAN_TX_BUF_ADDR_WRITE    0x4A
-
-/**
- * @def IX_NPE_A_MSSG_HSS_CHAN_TX_BUF_SIZE_WRITE
- *
- * @brief HSS Message ID command writes the HSSnC_TX_BUF_SIZEN value for HSS
- * port hPort. (n=hPort)
- */
-#define IX_NPE_A_MSSG_HSS_CHAN_TX_BUF_SIZE_WRITE    0x4B
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_FLOW_ENABLE
- *
- * @brief HSS Message ID command triggers the NPE to reset internal status and
- * enable the HssPacketized operation for the flow specified by pPipe on
- * the HSS port specified by hPort.
- */
-#define IX_NPE_A_MSSG_HSS_PKT_PIPE_FLOW_ENABLE      0x50
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_FLOW_DISABLE
- * @brief HSS Message ID command triggers the NPE to disable the HssPacketized
- * operation for the flow specified by pPipe on the HSS port specified by hPort.
- */
-#define IX_NPE_A_MSSG_HSS_PKT_PIPE_FLOW_DISABLE     0x51
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PKT_NUM_PIPES_WRITE
- * @brief HSS Message ID command writes the HSSnP_NUM_PIPES value for HSS
- * port hPort.(n=hPort)
- */
-#define IX_NPE_A_MSSG_HSS_PKT_NUM_PIPES_WRITE       0x52
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_FIFO_SIZEW_WRITE
- *
- * @brief HSS Message ID command writes the HSSnP_PIPEp_FIFOSIZEW value for
- * packet-pipe pPipe on HSS port hPort.  (n=hPort, p=pPipe)
- */
-#define IX_NPE_A_MSSG_HSS_PKT_PIPE_FIFO_SIZEW_WRITE 0x53
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_HDLC_CFG_WRITE
- *
- * @brief HSS Message ID command writes the HSSnP_PIPEp_HDLC_RXCFG and
- * HSSnP_PIPEp_HDLC_TXCFG values for packet-pipe pPipe on HSS port hPort.
- * (n=hPort, p=pPipe)
- */
-#define IX_NPE_A_MSSG_HSS_PKT_PIPE_HDLC_CFG_WRITE   0x54
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_IDLE_PATTERN_WRITE
- *
- * @brief HSS Message ID command writes the HSSnP_PIPEp_IDLE_PATTERN value
- * for packet-pipe pPipe on HSS port hPort.  (n=hPort, p=pPipe)
- */
-#define IX_NPE_A_MSSG_HSS_PKT_PIPE_IDLE_PATTERN_WRITE 0x55
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_RX_SIZE_WRITE
- *
- * @brief HSS Message ID command writes the HSSnP_PIPEp_RXSIZEB value for
- * packet-pipe pPipe on HSS port hPort.  (n=hPort, p=pPipe)
- */
-#define IX_NPE_A_MSSG_HSS_PKT_PIPE_RX_SIZE_WRITE    0x56
-
-/**
- * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_MODE_WRITE
- *
- * @brief HSS Message ID command writes the HSSnP_PIPEp_MODE value for
- * packet-pipe pPipe on HSS port hPort.  (n=hPort, p=pPipe)
- */
-#define IX_NPE_A_MSSG_HSS_PKT_PIPE_MODE_WRITE       0x57
-
-
-
-/* Queue Entry Masks */
-
-/*--------------------------------------------------------------------------
- *  ATM Descriptor Structure offsets
- *--------------------------------------------------------------------------*/
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_STATUS_OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor Status field
- *
- * It is used for descriptor error reporting.
- */
-#define IX_NPE_A_RXDESCRIPTOR_STATUS_OFFSET          0
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_VCID_OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor VC ID field
- *
- * It is used to hold an identifier number for this VC
- */
-#define IX_NPE_A_RXDESCRIPTOR_VCID_OFFSET            1
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_CURRMBUFSIZE_OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor Current Mbuf
- * Size field
- *
- * Number of bytes the current mbuf data buffer can hold
- */
-#define IX_NPE_A_RXDESCRIPTOR_CURRMBUFSIZE_OFFSET    2
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_ATMHEADER_OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor ATM Header
- */
-#define IX_NPE_A_RXDESCRIPTOR_ATMHEADER_OFFSET       4
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_CURRMBUFLEN_OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor Current MBuf length
- *
- *
- * RX - Initialized to zero.  The NPE updates this field as each cell is received and
- * zeroes it with every new mbuf for chaining. Will not be bigger than currBbufSize.
- */
-#define IX_NPE_A_RXDESCRIPTOR_CURRMBUFLEN_OFFSET    12
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_TIMELIMIT__OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor Time Limit field
- *
- * Contains the Payload Reassembly Time Limit (used for aal0_xx only)
- */
-#define IX_NPE_A_RXDESCRIPTOR_TIMELIMIT_OFFSET        14
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_PCURRMBUFF_OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor Current MBuf Pointer
- *
- * The current mbuf pointer of a chain of mbufs.
- */
-#define IX_NPE_A_RXDESCRIPTOR_PCURRMBUFF_OFFSET     20
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_PCURRMBUFDATA_OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor Current MBuf Pointer
- *
- * Pointer to the next byte to be read or next free location to be written.
- */
-#define IX_NPE_A_RXDESCRIPTOR_PCURRMBUFDATA_OFFSET  24
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_PNEXTMBUF_OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor Next MBuf Pointer
- *
- * Pointer to the next MBuf in a chain of MBufs.
- */
-#define IX_NPE_A_RXDESCRIPTOR_PNEXTMBUF_OFFSET      28
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_TOTALLENGTH_OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor Total Length
- *
- * Total number of bytes written to the chain of MBufs by the NPE
- */
-#define IX_NPE_A_RXDESCRIPTOR_TOTALLENGTH_OFFSET    32
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_AAL5CRCRESIDUE_OFFSET
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor AAL5 CRC Residue
- *
- * Current CRC value for a PDU
- */
-#define IX_NPE_A_RXDESCRIPTOR_AAL5CRCRESIDUE_OFFSET 36
-
-/**
- * @def IX_NPE_A_RXDESCRIPTOR_SIZE
- *
- * @brief ATM Descriptor structure offset for Receive Descriptor Size
- *
- * The size of the Receive descriptor
- */
-#define IX_NPE_A_RXDESCRIPTOR_SIZE                  40
-
-/**
- * @def IX_NPE_A_TXDESCRIPTOR_PORT_OFFSET
- *
- * @brief ATM Descriptor structure offset for Transmit Descriptor Port
- *
- * Port identifier.
- */
-#define IX_NPE_A_TXDESCRIPTOR_PORT_OFFSET            0
-
-/**
- * @def IX_NPE_A_TXDESCRIPTOR_RSVD_OFFSET
- *
- * @brief ATM Descriptor structure offset for Transmit Descriptor RSVD
- */
-#define IX_NPE_A_TXDESCRIPTOR_RSVD_OFFSET            1
-
-/**
- * @def IX_NPE_A_TXDESCRIPTOR_CURRMBUFLEN_OFFSET
- *
- * @brief ATM Descriptor structure offset for Transmit Descriptor Current MBuf Length
- *
- * TX - Initialized by the XScale to the number of bytes in the current MBuf data buffer.
- * The NPE decrements this field for every transmitted cell.  Thus, when the NPE writes a
- * descriptor the TxDone queue, this field will equal zero.
- */
-#define IX_NPE_A_TXDESCRIPTOR_CURRMBUFLEN_OFFSET     2
-
-/**
- * @def IX_NPE_A_TXDESCRIPTOR_ATMHEADER_OFFSET
- * @brief ATM Descriptor structure offset for Transmit Descriptor ATM Header
- */
-#define IX_NPE_A_TXDESCRIPTOR_ATMHEADER_OFFSET       4
-
-/**
- * @def IX_NPE_A_TXDESCRIPTOR_PCURRMBUFF_OFFSET
- *
- * @brief ATM Descriptor structure offset for Transmit Descriptor Pointer to the current MBuf chain
- */
-#define IX_NPE_A_TXDESCRIPTOR_PCURRMBUFF_OFFSET      8
-
-/**
- * @def IX_NPE_A_TXDESCRIPTOR_PCURRMBUFDATA_OFFSET
- *
- * @brief ATM Descriptor structure offset for Transmit Descriptor Pointer to the current MBuf Data
- *
- * Pointer to the next byte to be read or next free location to be written.
- */
-#define IX_NPE_A_TXDESCRIPTOR_PCURRMBUFDATA_OFFSET  12
-
-/**
- * @def IX_NPE_A_TXDESCRIPTOR_PNEXTMBUF_OFFSET
- *
- * @brief ATM Descriptor structure offset for Transmit Descriptor Pointer to the Next MBuf chain
- */
-#define IX_NPE_A_TXDESCRIPTOR_PNEXTMBUF_OFFSET      16
-
-/**
- * @def IX_NPE_A_TXDESCRIPTOR_TOTALLENGTH_OFFSET
- *
- * @brief ATM Descriptor structure offset for Transmit Descriptor Total Length
- *
- * Total number of bytes written to the chain of MBufs by the NPE
- */
-#define IX_NPE_A_TXDESCRIPTOR_TOTALLENGTH_OFFSET    20
-
-/**
- * @def IX_NPE_A_TXDESCRIPTOR_AAL5CRCRESIDUE_OFFSET
- *
- * @brief ATM Descriptor structure offset for Transmit Descriptor AAL5 CRC Residue
- *
- * Current CRC value for a PDU
- */
-#define IX_NPE_A_TXDESCRIPTOR_AAL5CRCRESIDUE_OFFSET 24
-
-/**
- * @def IX_NPE_A_TXDESCRIPTOR_SIZE
- *
- * @brief ATM Descriptor structure offset for Transmit Descriptor Size
- */
-#define IX_NPE_A_TXDESCRIPTOR_SIZE                  28
-
-/**
- * @def IX_NPE_A_CHAIN_DESC_COUNT_MAX
- *
- * @brief Maximum number of chained MBufs that can be chained together
- */
-#define IX_NPE_A_CHAIN_DESC_COUNT_MAX            256
-
-/*
- *  Definition of the ATM cell header
- *
- * This would most conviently be defined as the bit field shown below.
- * Endian portability prevents this, therefore a set of macros
- * are defined to access the fields within the cell header assumed to
- * be passed as a UINT32.
- *
- * Changes to field sizes or orders must be reflected in the offset
- * definitions above.
- *
- *    typedef struct
- *    {
- *       unsigned int gfc:4;
- *       unsigned int vpi:8;
- *       unsigned int vci:16;
- *       unsigned int pti:3;
- *       unsigned int clp:1;
- *    } IxNpeA_AtmCellHeader;
- *
- */
-
-/** Mask to acess GFC */
-#define GFC_MASK        0xf0000000
-
-/** return GFC from ATM cell header */
-#define IX_NPE_A_ATMCELLHEADER_GFC_GET( header ) \
-(((header) & GFC_MASK) >> 28)
-
-/** set GFC into ATM cell header */
-#define IX_NPE_A_ATMCELLHEADER_GFC_SET( header,gfc ) \
-do { \
-    (header) &= ~GFC_MASK; \
-    (header) |= (((gfc) << 28) & GFC_MASK); \
-} while(0)
-
-/** Mask to acess VPI */
-#define VPI_MASK        0x0ff00000
-
-/** return VPI from ATM cell header */
-#define IX_NPE_A_ATMCELLHEADER_VPI_GET( header ) \
-(((header) & VPI_MASK) >> 20)
-
-/** set VPI into ATM cell header */
-#define IX_NPE_A_ATMCELLHEADER_VPI_SET( header, vpi ) \
-do { \
-    (header) &= ~VPI_MASK; \
-    (header) |= (((vpi) << 20) & VPI_MASK); \
-} while(0)
-
-/** Mask to acess VCI */
-#define VCI_MASK        0x000ffff0
-
-/** return VCI from ATM cell header */
-#define IX_NPE_A_ATMCELLHEADER_VCI_GET( header ) \
-(((header) & VCI_MASK) >> 4)
-
-/** set VCI into ATM cell header */
-#define IX_NPE_A_ATMCELLHEADER_VCI_SET( header, vci ) \
-do { \
-    (header) &= ~VCI_MASK; \
-    (header) |= (((vci) << 4) & VCI_MASK); \
-} while(0)
-
-/** Mask to acess PTI */
-#define PTI_MASK        0x0000000e
-
-/** return PTI from ATM cell header */
-#define IX_NPE_A_ATMCELLHEADER_PTI_GET( header ) \
-(((header) & PTI_MASK) >> 1)
-
-/** set PTI into ATM cell header */
-#define IX_NPE_A_ATMCELLHEADER_PTI_SET( header, pti ) \
-do { \
-    (header) &= ~PTI_MASK; \
-    (header) |= (((pti) << 1) & PTI_MASK); \
-} while(0)
-
-/** Mask to acess CLP */
-#define CLP_MASK        0x00000001
-
-/** return CLP from ATM cell header */
-#define IX_NPE_A_ATMCELLHEADER_CLP_GET( header ) \
-((header) & CLP_MASK)
-
-/** set CLP into ATM cell header */
-#define IX_NPE_A_ATMCELLHEADER_CLP_SET( header, clp ) \
-do { \
-    (header) &= ~CLP_MASK; \
-    (header) |= ((clp) & CLP_MASK); \
-} while(0)
-
-
-/*
-* Definition of the Rx bitfield
-*
-* This would most conviently be defined as the bit field shown below.
-* Endian portability prevents this, therefore a set of macros
-* are defined to access the fields within the rxBitfield assumed to
-* be passed as a UINT32.
-*
-* Changes to field sizes or orders must be reflected in the offset
-* definitions above.
-*
-* Rx bitfield
-*    struct
-*    {   IX_NPEA_RXBITFIELD(
-*        unsigned int status:1,
-*        unsigned int port:7,
-*        unsigned int vcId:8,
-*        unsigned int currMbufSize:16);
-*    } rxBitField;
-*
-*/
-
-/** Mask to acess the rxBitField status */
-#define STATUS_MASK     0x80000000
-
-/** return the rxBitField status */
-#define IX_NPE_A_RXBITFIELD_STATUS_GET( rxbitfield ) \
-(((rxbitfield) & STATUS_MASK) >> 31)
-
-/** set the rxBitField status */
-#define IX_NPE_A_RXBITFIELD_STATUS_SET( rxbitfield, status ) \
-do { \
-    (rxbitfield) &= ~STATUS_MASK; \
-    (rxbitfield) |= (((status) << 31) & STATUS_MASK); \
-} while(0)
-
-/** Mask to acess the rxBitField port */
-#define PORT_MASK       0x7f000000
-
-/** return the rxBitField port */
-#define IX_NPE_A_RXBITFIELD_PORT_GET( rxbitfield ) \
-(((rxbitfield) & PORT_MASK) >> 24)
-
-/** set the rxBitField port */
-#define IX_NPE_A_RXBITFIELD_PORT_SET( rxbitfield, port ) \
-do { \
-    (rxbitfield) &= ~PORT_MASK; \
-    (rxbitfield) |= (((port) << 24) & PORT_MASK); \
-} while(0)
-
-/** Mask to acess the rxBitField vcId */
-#define VCID_MASK       0x00ff0000
-
-/** return the rxBitField vcId */
-#define IX_NPE_A_RXBITFIELD_VCID_GET( rxbitfield ) \
-(((rxbitfield) & VCID_MASK) >> 16)
-
-/** set the rxBitField vcId */
-#define IX_NPE_A_RXBITFIELD_VCID_SET( rxbitfield, vcid ) \
-do { \
-    (rxbitfield) &= ~VCID_MASK; \
-    (rxbitfield) |= (((vcid) << 16) & VCID_MASK); \
-} while(0)
-
-/** Mask to acess the rxBitField mbuf size */
-#define CURRMBUFSIZE_MASK       0x0000ffff
-
-/** return the rxBitField mbuf size */
-#define IX_NPE_A_RXBITFIELD_CURRMBUFSIZE_GET( rxbitfield ) \
-((rxbitfield) & CURRMBUFSIZE_MASK)
-
-/** set the rxBitField mbuf size */
-#define IX_NPE_A_RXBITFIELD_CURRMBUFSIZE_SET( rxbitfield, currmbufsize ) \
-do { \
-    (rxbitfield) &= ~CURRMBUFSIZE_MASK; \
-    (rxbitfield) |= ((currmbufsize) & CURRMBUFSIZE_MASK); \
-} while(0)
-
-
-
-/**
- * @brief Tx Descriptor definition
- */
-typedef struct
-{
-    UINT8 port;				/**< Tx Port number */
-    UINT8 aalType; 			/**< AAL Type */
-    UINT16 currMbufLen;			/**< mbuf length */
-    UINT32 atmCellHeader;		/**< ATM cell header */
-    IX_OSAL_MBUF *pCurrMbuf;	        /**< pointer to mbuf */
-    unsigned char *pCurrMbufData;	/**< Pointer to mbuf->dat */
-    IX_OSAL_MBUF *pNextMbuf;		/**< Pointer to next mbuf */
-    UINT32  totalLen;			/**< Total Length */
-    UINT32  aal5CrcResidue;		/**< AAL5 CRC Residue */
-} IxNpeA_TxAtmVc;
-
-/* Changes to field sizes or orders must be reflected in the offset
- * definitions above. */
-
-
-
-
-/**
- * @brief Rx Descriptor definition
- */
-typedef struct
-{
-    UINT32  rxBitField;			/**< Received bit field */
-    UINT32  atmCellHeader;		/**< ATM Cell Header */
-    UINT32  rsvdWord0;                  /**< Reserved field */
-    UINT16  currMbufLen;		/**< Mbuf Length */
-    UINT8   timeLimit; 			/**< Payload Reassembly timeLimit (used for aal0_xx only) */
-    UINT8   rsvdByte0;                  /**< Reserved field */ 
-    UINT32  rsvdWord1;   		/**< Reserved field */
-    IX_OSAL_MBUF *pCurrMbuf;		/**< Pointer to current mbuf */
-    unsigned char *pCurrMbufData;	/**< Pointer to current mbuf->data */
-    IX_OSAL_MBUF *pNextMbuf;		/**< Pointer to next mbuf */
-    UINT32  totalLen;			/**< Total Length */
-    UINT32  aal5CrcResidue;		/**< AAL5 CRC Residue */
-} IxNpeA_RxAtmVc;
-
-
-/**
- * @brief NPE-A AAL Type
- */
-typedef enum
-{
-    IX_NPE_A_AAL_TYPE_INVALID = 0,	/**< Invalid AAL type */
-    IX_NPE_A_AAL_TYPE_0_48    = 0x1,	/**< AAL0 - 48 byte */
-    IX_NPE_A_AAL_TYPE_0_52    = 0x2,	/**< AAL0 - 52 byte */
-    IX_NPE_A_AAL_TYPE_5       = 0x5,	/**< AAL5 */
-    IX_NPE_A_AAL_TYPE_OAM     = 0xF	/**< OAM */
-} IxNpeA_AalType;
-
-/**
- * @brief NPE-A Payload format 52-bytes & 48-bytes
- */
-typedef enum
-{
-    IX_NPE_A_52_BYTE_PAYLOAD = 0,	/**< 52 byte payload */
-    IX_NPE_A_48_BYTE_PAYLOAD		/**< 48 byte payload */
-} IxNpeA_PayloadFormat;
-
-/**
- * @brief  HSS Packetized NpePacket Descriptor Structure
- */
-typedef struct
-{
-    UINT8   status;		/**< Status of the packet passed to the client */
-    UINT8   errorCount;		/**< Number of errors */
-    UINT8   chainCount;		/**< Mbuf chain count e.g. 0 - No mbuf chain */
-    UINT8   rsvdByte0;		/**< Reserved byte to make the descriptor word align */
-
-    UINT16  packetLength;	/**< Packet Length */
-    UINT16  rsvdShort0;		/**< Reserved short to make the descriptor a word align */
-
-    IX_OSAL_MBUF *pRootMbuf;	/**< Pointer to Root mbuf */
-    IX_OSAL_MBUF *pNextMbuf;	/**< Pointer to next mbuf */
-    UINT8   *pMbufData;		/**< Pointer to the current mbuf->data */
-    UINT32  mbufLength;		/**< Current mbuf length */
-
-} IxNpeA_NpePacketDescriptor;
-
-
-#endif
-/**
- *@}
- */
-
-#endif /* __doxygen_HIDE */
diff --git a/drivers/net/npe/include/IxNpeDl.h b/drivers/net/npe/include/IxNpeDl.h
deleted file mode 100644
index f87ee4b..0000000
--- a/drivers/net/npe/include/IxNpeDl.h
+++ /dev/null
@@ -1,956 +0,0 @@
-/**
- * @file IxNpeDl.h
- *
- * @date 14 December 2001
-
- * @brief This file contains the public API of the IXP400 NPE Downloader
- *        component.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxNpeDl IXP400 NPE-Downloader (IxNpeDl) API
- *
- * @brief The Public API for the IXP400 NPE Downloader
- *
- * @{
- */
-
-#ifndef IXNPEDL_H
-#define IXNPEDL_H
-
-/*
- * Put the user defined include files required
- */
-#include "IxOsalTypes.h"
-#include "IxNpeMicrocode.h"
-
-/*
- * #defines for function return types, etc.
- */
-
-/**
- * @def IX_NPEDL_PARAM_ERR
- *
- * @brief NpeDl function return value for a parameter error
- */
-#define IX_NPEDL_PARAM_ERR               2
-
-/**
- * @def IX_NPEDL_RESOURCE_ERR
- *
- * @brief NpeDl function return value for a resource error
- */
-#define IX_NPEDL_RESOURCE_ERR            3
-
-/**
- * @def IX_NPEDL_CRITICAL_NPE_ERR
- *
- * @brief NpeDl function return value for a Critical NPE error occuring during
-          download. Assume NPE is left in unstable condition if this value is
-          returned or NPE is hang / halt.
- */
-#define IX_NPEDL_CRITICAL_NPE_ERR        4
-
-/**
- * @def IX_NPEDL_CRITICAL_MICROCODE_ERR
- *
- * @brief NpeDl function return value for a Critical Microcode error
- *        discovered during download. Assume NPE is left in unstable condition
- *        if this value is returned.
- */
-#define IX_NPEDL_CRITICAL_MICROCODE_ERR  5
-
-/**
- * @def IX_NPEDL_DEVICE_ERR
- *
- * @brief NpeDl function return value when image being downloaded
- *        is not meant for the device in use
- */
-#define IX_NPEDL_DEVICE_ERR 6 
-
-/**
- * @defgroup NPEImageID IXP400 NPE Image ID Definition
- *
- * @ingroup IxNpeDl
- *
- * @brief Definition of NPE Image ID to be passed to ixNpeDlNpeInitAndStart()
- *        as input of type UINT32 which has the following fields format:
- *
- *               Field [Bit Location] <BR>
- *               -------------------- <BR>
- *               Device ID [31 - 28] <BR>
- *               NPE ID [27 - 24] <BR>
- *               NPE Functionality ID [23 - 16] <BR>
- *               Major Release Number [15 -  8] <BR>
- *               Minor Release Number [7 - 0] <BR>
- *
- *
- * @{
- */
-
-/**
- * @def IX_NPEDL_NPEIMAGE_FIELD_MASK
- *
- * @brief Mask for NPE Image ID's Field
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define IX_NPEDL_NPEIMAGE_FIELD_MASK  0xff
-
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEID_MASK
- *
- * @brief Mask for NPE Image NPE ID's Field
- *
- */
-#define IX_NPEDL_NPEIMAGE_NPEID_MASK  0xf
-
-/**
- * @def IX_NPEDL_NPEIMAGE_DEVICEID_MASK
- *
- * @brief Mask for NPE Image Device ID's Field
- *
- */
-#define IX_NPEDL_NPEIMAGE_DEVICEID_MASK  0xf
-
-/**
- * @def IX_NPEDL_NPEIMAGE_BIT_LOC_NPEID
- *
- * @brief Location of NPE ID field in term of bit.
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define IX_NPEDL_NPEIMAGE_BIT_LOC_NPEID  24
-
-/**
- * @def IX_NPEDL_NPEIMAGE_BIT_LOC_FUNCTIONALITYID
- *
- * @brief Location of Functionality ID field in term of bit.
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define IX_NPEDL_NPEIMAGE_BIT_LOC_FUNCTIONALITYID  16
-
-/**
- * @def IX_NPEDL_NPEIMAGE_BIT_LOC_MAJOR
- *
- * @brief Location of Major Release Number field in term of bit.
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define IX_NPEDL_NPEIMAGE_BIT_LOC_MAJOR  8
-
-/**
- * @def IX_NPEDL_NPEIMAGE_BIT_LOC_MINOR
- *
- * @brief Location of Minor Release Number field in term of bit.
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define IX_NPEDL_NPEIMAGE_BIT_LOC_MINOR  0
-
-/**
- * @} addtogroup NPEImageID
- */
-
-/**
- * @def ixNpeDlMicrocodeImageOverride(x)
- *
- * @brief  Map old terminology that uses term "image" to new term
- *        "image library"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define ixNpeDlMicrocodeImageOverride(x) ixNpeDlMicrocodeImageLibraryOverride(x)
-
-/**
- * @def IxNpeDlVersionId
- *
- * @brief  Map old terminology that uses term "version" to new term
- *        "image"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define IxNpeDlVersionId IxNpeDlImageId
-
-/**
- * @def ixNpeDlVersionDownload
- *
- * @brief  Map old terminology that uses term "version" to new term
- *        "image"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define ixNpeDlVersionDownload(x,y) ixNpeDlImageDownload(x,y)
-
-/**
- * @def ixNpeDlAvailableVersionsCountGet
- *
- * @brief  Map old terminology that uses term "version" to new term
- *        "image"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define ixNpeDlAvailableVersionsCountGet(x) ixNpeDlAvailableImagesCountGet(x)
-
-/**
- * @def ixNpeDlAvailableVersionsListGet
- *
- * @brief  Map old terminology that uses term "version" to new term
- *        "image"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define ixNpeDlAvailableVersionsListGet(x,y) ixNpeDlAvailableImagesListGet(x,y)
-
- /**
- * @def ixNpeDlLoadedVersionGet
- *
- * @brief  Map old terminology that uses term "version" to new term
- *        "image"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define ixNpeDlLoadedVersionGet(x,y) ixNpeDlLoadedImageGet(x,y)
-
- /**
- * @def clientImage
- *
- * @brief  Map old terminology that uses term "image" to new term
- *        "image library"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define clientImage clientImageLibrary
-
- /**
- * @def versionIdPtr
- *
- * @brief  Map old terminology that uses term "version" to new term
- *        "image"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define versionIdPtr imageIdPtr
-
- /**
- * @def numVersionsPtr
- *
- * @brief  Map old terminology that uses term "version" to new term
- *        "image"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define numVersionsPtr numImagesPtr
-
-/**
- * @def versionIdListPtr
- *
- * @brief  Map old terminology that uses term "version" to new term
- *        "image"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define versionIdListPtr imageIdListPtr
-
-/**
- * @def IxNpeDlBuildId
- *
- * @brief  Map old terminology that uses term "buildId" to new term
- *        "functionalityId"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define IxNpeDlBuildId IxNpeDlFunctionalityId
-
-/**
- * @def buildId
- *
- * @brief  Map old terminology that uses term "buildId" to new term
- *        "functionalityId"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define buildId functionalityId
-
-/**
- * @def IX_NPEDL_MicrocodeImage
- *
- * @brief  Map old terminology that uses term "image" to new term
- *        "image library"
- *
- * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-#define IX_NPEDL_MicrocodeImage IX_NPEDL_MicrocodeImageLibrary
-
-/*
- * Typedefs
- */
-
-/**
- * @typedef IxNpeDlFunctionalityId
- * @brief Used to make up Functionality ID field of Image Id
- *
- * @warning <b>THIS typedef HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-typedef UINT8 IxNpeDlFunctionalityId;
-
-/**
- * @typedef IxNpeDlMajor
- * @brief Used to make up Major Release field of Image Id
- *
- * @warning <b>THIS typedef HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-typedef UINT8 IxNpeDlMajor;
-
-/**
- * @typedef IxNpeDlMinor
- * @brief Used to make up Minor Revision field of Image Id
- *
- * @warning <b>THIS typedef HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-typedef UINT8 IxNpeDlMinor;
-
-/*
- * Enums
- */
-
-/**
- * @brief NpeId numbers to identify NPE A, B or C
- * @note In this context, for IXP425 Silicon (B0):<br>
- *      - NPE-A has HDLC, HSS, AAL and UTOPIA Coprocessors.<br>
- *      - NPE-B has Ethernet Coprocessor.<br>
- *      - NPE-C has Ethernet, AES, DES and HASH Coprocessors.<br>
- *      - IXP400 Product Line have different combinations of coprocessors.
- */
-typedef enum
-{
-  IX_NPEDL_NPEID_NPEA = 0,    /**< Identifies NPE A */
-  IX_NPEDL_NPEID_NPEB,        /**< Identifies NPE B */
-  IX_NPEDL_NPEID_NPEC,        /**< Identifies NPE C */
-  IX_NPEDL_NPEID_MAX          /**< Total Number of NPEs */
-} IxNpeDlNpeId;
-
-/*
- * Structs
- */
-
-/**
- * @brief Image Id to identify each image contained in an image library
- *
- * @warning <b>THIS struct HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart for more information.
- */
-typedef struct
-{
-    IxNpeDlNpeId   npeId;   /**< NPE ID */
-    IxNpeDlFunctionalityId functionalityId; /**< Build ID indicates functionality of image */
-    IxNpeDlMajor   major;   /**< Major Release Number */
-    IxNpeDlMinor   minor;   /**< Minor Revision Number */
-} IxNpeDlImageId;
-
-/*
- * Prototypes for interface functions
- */
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlNpeInitAndStart (UINT32 imageId)
- *
- * @brief Stop, reset, download microcode (firmware) and finally start NPE.
- *
- * @param imageId UINT32 [in] - Id of the microcode image to download.
- *
- * This function locates the image specified by the <i>imageId</i> parameter
- * from the default microcode image library which is included internally by
- * this component.
- * It then stops and resets the NPE, loads the firmware image onto the NPE,
- * and then restarts the NPE.
- *
- * @note A list of valid image IDs is included in this header file.
- *       See #defines with prefix IX_NPEDL_NPEIMAGE_...
- *
- * @note This function, along with @ref ixNpeDlCustomImageNpeInitAndStart
- *       and @ref ixNpeDlLoadedImageFunctionalityGet, supercedes the following
- *       functions which are deprecated and will be removed completely in a
- *       future release:
- *       - @ref ixNpeDlImageDownload
- *       - @ref ixNpeDlAvailableImagesCountGet
- *       - @ref ixNpeDlAvailableImagesListGet
- *       - @ref ixNpeDlLatestImageGet
- *       - @ref ixNpeDlLoadedImageGet
- *       - @ref ixNpeDlMicrocodeImageLibraryOverride
- *       - @ref ixNpeDlNpeExecutionStop
- *       - @ref ixNpeDlNpeStopAndReset
- *       - @ref ixNpeDlNpeExecutionStart
- *
- * @pre
- *         - The Client is responsible for ensuring mutual access to the NPE.
- * @post
- *         - The NPE Instruction Pipeline will be cleared if State Information
- *           has been downloaded.
- *         - If the download fails with a critical error, the NPE may
- *           be left in an ususable state.
- * @return
- *         - IX_SUCCESS if the download was successful;
- *         - IX_NPEDL_PARAM_ERR if a parameter error occured
- *         - IX_NPEDL_CRITICAL_NPE_ERR if a critical NPE error occured during
- *           download
- *         - IX_NPEDL_CRITICAL_MICROCODE_ERR if a critical microcode error
- *           occured during download
- *         - IX_NPEDL_DEVICE_ERR if the image being loaded is not meant for 
- *           the device currently running.
- *         - IX_FAIL if NPE is not available or image is failed to be located.
- *           A warning is issued if the NPE is not present.
- */
-PUBLIC IX_STATUS
-ixNpeDlNpeInitAndStart (UINT32 npeImageId);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlCustomImageNpeInitAndStart (UINT32 *imageLibrary,
-                                                           UINT32 imageId)
- *
- * @brief Stop, reset, download microcode (firmware) and finally start NPE
- *
- * @param imageId UINT32 [in] - Id of the microcode image to download.
- *
- * This function locates the image specified by the <i>imageId</i> parameter
- * from the specified microcode image library which is pointed to by the
- * <i>imageLibrary</i> parameter.
- * It then stops and resets the NPE, loads the firmware image onto the NPE,
- * and then restarts the NPE.
- *
- * This is a facility for users who wish to use an image from an external
- * library of NPE firmware images.  To use a standard image from the
- * built-in library, see @ref ixNpeDlNpeInitAndStart instead.
- *
- * @note A list of valid image IDs is included in this header file.
- *       See #defines with prefix IX_NPEDL_NPEIMAGE_...
- *
- * @note This function, along with @ref ixNpeDlNpeInitAndStart
- *       and @ref ixNpeDlLoadedImageFunctionalityGet, supercedes the following
- *       functions which are deprecated and will be removed completely in a
- *       future release:
- *       - @ref ixNpeDlImageDownload
- *       - @ref ixNpeDlAvailableImagesCountGet
- *       - @ref ixNpeDlAvailableImagesListGet
- *       - @ref ixNpeDlLatestImageGet
- *       - @ref ixNpeDlLoadedImageGet
- *       - @ref ixNpeDlMicrocodeImageLibraryOverride
- *       - @ref ixNpeDlNpeExecutionStop
- *       - @ref ixNpeDlNpeStopAndReset
- *       - @ref ixNpeDlNpeExecutionStart
- *
- * @pre
- *         - The Client is responsible for ensuring mutual access to the NPE.
- *         - The image library supplied must be in the correct format for use
- *           by the NPE Downloader (IxNpeDl) component.  Details of the library
- *           format are contained in the Functional Specification document for
- *           IxNpeDl.
- * @post
- *         - The NPE Instruction Pipeline will be cleared if State Information
- *           has been downloaded.
- *         - If the download fails with a critical error, the NPE may
- *           be left in an ususable state.
- * @return
- *         - IX_SUCCESS if the download was successful;
- *         - IX_NPEDL_PARAM_ERR if a parameter error occured
- *         - IX_NPEDL_CRITICAL_NPE_ERR if a critical NPE error occured during
- *           download
- *         - IX_NPEDL_CRITICAL_MICROCODE_ERR if a critical microcode error
- *           occured during download
- *         - IX_NPEDL_DEVICE_ERR if the image being loaded is not meant for 
- *           the device currently running.
- *         - IX_FAIL if NPE is not available or image is failed to be located.
- *           A warning is issued if the NPE is not present.
- */
-PUBLIC IX_STATUS
-ixNpeDlCustomImageNpeInitAndStart (UINT32 *imageLibrary,
-                    UINT32 npeImageId);
-
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlLoadedImageFunctionalityGet (IxNpeDlNpeId npeId,
-                                                        UINT8 *functionalityId)
- *
- * @brief Gets the functionality of the image last loaded on a particular NPE
- *
- * @param npeId  @ref IxNpeDlNpeId [in]      - Id of the target NPE.
- * @param functionalityId UINT8* [out] - the functionality ID of the image
- *                                       last loaded on the NPE.
- *
- * This function retrieves the functionality ID of the image most recently
- * downloaded successfully to the specified NPE.  If the NPE does not contain
- * a valid image, this function returns a FAIL status.
- *
- * @warning This function is not intended for general use, as a knowledge of
- * how to interpret the functionality ID is required.  As such, this function
- * should only be used by other Access Layer components of the IXP400 Software
- * Release.
- *
- * @pre
- *
- * @post
- *
- * @return
- *     -  IX_SUCCESS if the operation was successful
- *     -  IX_NPEDL_PARAM_ERR if a parameter error occured
- *     -  IX_FAIL if the NPE does not have a valid image loaded
- */
-PUBLIC IX_STATUS
-ixNpeDlLoadedImageFunctionalityGet (IxNpeDlNpeId npeId,
-                                    UINT8 *functionalityId);
-
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn IX_STATUS ixNpeDlMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary)
- *
- * @brief This instructs NPE Downloader to use client-supplied microcode image library.
- *
- * @param clientImageLibrary UINT32* [in]  - Pointer to the client-supplied
- *                                   NPE microcode image library
- *
- * This function sets NPE Downloader to use a client-supplied microcode image library
- * instead of the standard image library which is included by the NPE Downloader.
- * <b>This function is provided mainly for increased testability and should not
- * be used in normal circumstances.</b> When not used, NPE Downloader will use
- * a "built-in" image library, local to this component, which should always contain the
- * latest microcode for the NPEs.
- *
- * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlCustomImageNpeInitAndStart.
- *
- * @pre
- *      - <i>clientImageLibrary</i> should point to a microcode image library valid for use
- *        by the NPE Downloader component.
- *
- * @post
- *      - the client-supplied image library will be used for all subsequent operations
- *        performed by the NPE Downloader
- *
- * @return
- *      - IX_SUCCESS if the operation was successful
- *      - IX_NPEDL_PARAM_ERR if a parameter error occured
- *      - IX_FAIL if the client-supplied image library did not contain a valid signature
- */
-PUBLIC IX_STATUS
-ixNpeDlMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr,
-                                                BOOL verify)
- *
- * @brief Stop, reset, download microcode and finally start NPE.
- *
- * @param imageIdPtr @ref IxNpeDlImageId* [in] - Pointer to Id of the microcode
- *                                              image to download.
- * @param verify BOOL [in]     - ON/OFF option to verify the download. If ON
- *                               (verify == true), the Downloader will read back
- *                               each word written to the NPE registers to
- *                               ensure the download operation was successful.
- *
- * Using the <i>imageIdPtr</i>, this function locates a particular image of
- * microcode in the microcode image library in memory, and downloads the microcode
- * to a particular NPE.
- *
- * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart.
- *
- * @pre
- *         - The Client is responsible for ensuring mutual access to the NPE.
- *       - The Client should use ixNpeDlLatestImageGet() to obtain the latest
- *         version of the image before attempting download.
- * @post
- *         - The NPE Instruction Pipeline will be cleared if State Information
- *           has been downloaded.
- *         - If the download fails with a critical error, the NPE may
- *           be left in an ususable state.
- * @return
- *         - IX_SUCCESS if the download was successful;
- *         - IX_NPEDL_PARAM_ERR if a parameter error occured
- *         - IX_NPEDL_CRITICAL_NPE_ERR if a critical NPE error occured during
- *           download
- *         - IX_PARAM_CRITICAL_MICROCODE_ERR if a critical microcode error
- *           occured during download
- *         - IX_FAIL if NPE is not available or image is failed to be located.
- *           A warning is issued if the NPE is not present.
- */
-PUBLIC IX_STATUS
-ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr,
-            BOOL verify);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlAvailableImagesCountGet (UINT32 *numImagesPtr)
- *
- * @brief Get the number of Images available in a microcode image library
- *
- * @param numImagesPtr UINT32* [out] - A pointer to the number of images in
- *                                       the image library.
- *
- * Gets the number of images available in the microcode image library.
- * Then returns this in a variable pointed to by <i>numImagesPtr</i>.
- *
- * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart.
- *
- * @pre
- *     - The Client should declare the variable to which numImagesPtr points
- *
- * @post
- *
- * @return
- *     - IX_SUCCESS if the operation was successful
- *     - IX_NPEDL_PARAM_ERR if a parameter error occured
- *     - IX_FAIL otherwise
- */
-PUBLIC IX_STATUS
-ixNpeDlAvailableImagesCountGet (UINT32 *numImagesPtr);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlAvailableImagesListGet (IxNpeDlImageId *imageIdListPtr,
-                                                         UINT32 *listSizePtr)
- *
- * @brief Get a list of the images available in a microcode image library
- *
- * @param imageIdListPtr @ref IxNpeDlImageId* [out] - Array to contain list of
- *                                                   image Ids (memory
- *                                                   allocated by Client).
- * @param listSizePtr UINT32* [inout]  - As an input, this param should point
- *                                       to the max number of Ids the
- *                                       <i>imageIdListPtr</i> array can
- *                                       hold. NpeDl will replace the input
- *                                       value of this parameter with the
- *                                       number of image Ids actually filled
- *                                       into the array before returning.
- *
- * Finds list of images available in the microcode image library.
- * Fills these into the array pointed to by <i>imageIdListPtr</i>
- *
- * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart.
- *
- * @pre
- *     - The Client should declare the variable to which numImagesPtr points
- *     - The Client should create an array (<i>imageIdListPtr</i>) large
- *       enough to contain all the image Ids in the image library
- *
- * @post
- *
- * @return
- *     - IX_SUCCESS if the operation was successful
- *     - IX_NPEDL_PARAM_ERR if a parameter error occured
- *     - IX_FAIL otherwise
- */
-PUBLIC IX_STATUS
-ixNpeDlAvailableImagesListGet (IxNpeDlImageId *imageIdListPtr,
-                 UINT32 *listSizePtr);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlLoadedImageGet (IxNpeDlNpeId npeId,
-                                                IxNpeDlImageId *imageIdPtr)
- *
- * @brief Gets the Id of the image currently loaded on a particular NPE
- *
- * @param npeId @ref IxNpeDlNpeId [in]              - Id of the target NPE.
- * @param imageIdPtr @ref IxNpeDlImageId* [out]     - Pointer to the where the
- *                                               image id should be stored.
- *
- * If an image of microcode was previously downloaded successfully to the NPE
- * by NPE Downloader, this function returns in <i>imageIdPtr</i> the image
- * Id of that image loaded on the NPE.
- *
- * @pre
- *     - The Client has allocated memory to the <i>imageIdPtr</i> pointer.
- *
- * @post
- *
- * @return
- *     -  IX_SUCCESS if the operation was successful
- *     -  IX_NPEDL_PARAM_ERR if a parameter error occured
- *     -  IX_FAIL if the NPE doesn't currently have a image loaded
- */
-PUBLIC IX_STATUS
-ixNpeDlLoadedImageGet (IxNpeDlNpeId npeId,
-             IxNpeDlImageId *imageIdPtr);
-
-/**
- * @fn PUBLIC IX_STATUS ixNpeDlLatestImageGet (IxNpeDlNpeId npeId, IxNpeDlFunctionalityId
-                                        functionalityId, IxNpeDlImageId *imageIdPtr)
- *
- * @brief This instructs NPE Downloader to get Id of the latest version for an
- * image that is specified by the client.
- *
- * @param npeId @ref IxNpeDlNpeId [in]                    - Id of the target NPE.
- * @param functionalityId @ref IxNpeDlFunctionalityId [in]    - functionality of the image
- * @param imageIdPtr @ref IxNpeDlImageId* [out]               - Pointer to the where the
- *                                                         image id should be stored.
- *
- * This function sets NPE Downloader to return the id of the latest version for
- * image.  The user will select the image by providing a particular NPE
- * (specifying <i>npeId</i>) with particular functionality (specifying
- * <i>FunctionalityId</i>). The most recent version available as determined by the
- * highest Major and Minor revision numbers is returned in <i>imageIdPtr</i>.
- *
- * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart.
- *
- * @return
- *      - IX_SUCCESS if the operation was successful
- *      - IX_NPEDL_PARAM_ERR if a parameter error occured
- *      - IX_FAIL otherwise
- */
-PUBLIC IX_STATUS
-ixNpeDlLatestImageGet (IxNpeDlNpeId npeId,
-             IxNpeDlFunctionalityId functionalityId,
-                    IxNpeDlImageId *imageIdPtr);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId)
- *
- * @brief Stops and Resets an NPE
- *
- * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE.
- *
- * This function performs a soft NPE reset by writing reset values to
- * particular NPE registers. Note that this does not reset NPE co-processors.
- * This implicitly stops NPE code execution before resetting the NPE.
- *
- * @note It is no longer necessary to call this function before downloading
- * a new image to the NPE.  It is left on the API only to allow greater control
- * of NPE execution if required.  Where appropriate, use @ref ixNpeDlNpeInitAndStart
- * or @ref ixNpeDlCustomImageNpeInitAndStart instead.
- *
- * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart.
- *
- * @pre
- *     - The Client is responsible for ensuring mutual access to the NPE.
- *
- * @post
- *
- * @return
- *      - IX_SUCCESS if the operation was successful
- *      - IX_NPEDL_PARAM_ERR if a parameter error occured
- *      - IX_FAIL otherwise
- *      - IX_NPEDL_CRITICAL_NPE_ERR failed to reset NPE due to timeout error. 
- *        Timeout error could happen if NPE hang
- */
-PUBLIC IX_STATUS
-ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId)
- *
- * @brief Starts code execution on a NPE
- *
- * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE
- *
- * Starts execution of code on a particular NPE.  A client would typically use
- * this after a download to NPE is performed, to start/restart code execution
- * on the NPE.
- *
- * @note It is no longer necessary to call this function after downloading
- * a new image to the NPE.  It is left on the API only to allow greater control
- * of NPE execution if required.  Where appropriate, use @ref ixNpeDlNpeInitAndStart
- * or @ref ixNpeDlCustomImageNpeInitAndStart instead.
- *
- * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart.
- *
- * @pre
- *     - The Client is responsible for ensuring mutual access to the NPE.
- *     - Note that this function does not set the NPE Next Program Counter
- *       (NextPC), so it should be set beforehand if required by downloading
- *       appropriate State Information (using ixNpeDlVersionDownload()).
- *
- * @post
- *
- * @return
- *      - IX_SUCCESS if the operation was successful
- *      - IX_NPEDL_PARAM_ERR if a parameter error occured
- *      - IX_FAIL otherwise
- */
-PUBLIC IX_STATUS
-ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId)
- *
- * @brief Stops code execution on a NPE
- *
- * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE
- *
- * Stops execution of code on a particular NPE.  This would typically be used
- * by a client before a download to NPE is performed, to stop code execution on
- * an NPE, unless ixNpeDlNpeStopAndReset() is used instead.  Unlike
- * ixNpeDlNpeStopAndReset(), this function only halts the NPE and leaves
- * all registers and settings intact. This is useful, for example, between
- * stages of a multi-stage download, to stop the NPE prior to downloading the
- * next image while leaving the current state of the NPE intact..
- *
- * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b>
- *       It will be removed in a future release.
- *       See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart.
- *
- * @pre
- *     - The Client is responsible for ensuring mutual access to the NPE.
- *
- * @post
- *
- * @return
- *      - IX_SUCCESS if the operation was successful
- *      - IX_NPEDL_PARAM_ERR if a parameter error occured
- *      - IX_FAIL otherwise
- */
-PUBLIC IX_STATUS
-ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC IX_STATUS ixNpeDlUnload (void)
- *
- * @brief This function will uninitialise the IxNpeDl component.
- *
- * This function will uninitialise the IxNpeDl component.  It should only be
- * called once, and only if the IxNpeDl component has already been initialised by
- * calling any of the following functions:
- * - @ref ixNpeDlNpeInitAndStart
- * - @ref ixNpeDlCustomImageNpeInitAndStart
- * - @ref ixNpeDlImageDownload     (deprecated)
- * - @ref ixNpeDlNpeStopAndReset   (deprecated)
- * - @ref ixNpeDlNpeExecutionStop  (deprecated)
- * - @ref ixNpeDlNpeExecutionStart (deprecated)
- *
- * If possible, this function should be called before a soft reboot or unloading
- * a kernel module to perform any clean up operations required for IxNpeDl.
- *
- * The following actions will be performed by this function:
- * - Unmapping of any kernel memory mapped by IxNpeDl
- *
- * @return
- *      - IX_SUCCESS if the operation was successful
- *      - IX_FAIL otherwise
- */
-
-PUBLIC IX_STATUS 
-ixNpeDlUnload (void);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC void ixNpeDlStatsShow (void)
- *
- * @brief This function will display run-time statistics from the IxNpeDl
- *        component
- *
- * @return none
- */
-PUBLIC void
-ixNpeDlStatsShow (void);
-
-/**
- * @ingroup IxNpeDl
- *
- * @fn PUBLIC void ixNpeDlStatsReset (void)
- *
- * @brief This function will reset the statistics of the IxNpeDl component
- *
- * @return none
- */
-PUBLIC void
-ixNpeDlStatsReset (void);
-
-#endif /* IXNPEDL_H */
-
-/**
- * @} defgroup IxNpeDl
- */
-
-
diff --git a/drivers/net/npe/include/IxNpeDlImageMgr_p.h b/drivers/net/npe/include/IxNpeDlImageMgr_p.h
deleted file mode 100644
index 34dd3a4..0000000
--- a/drivers/net/npe/include/IxNpeDlImageMgr_p.h
+++ /dev/null
@@ -1,339 +0,0 @@
-/**
- * @file IxNpeDlImageMgr_p.h
- *
- * @author Intel Corporation
- * @date 14 December 2001
-
- * @brief This file contains the private API for the ImageMgr module
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxNpeDlImageMgr_p IxNpeDlImageMgr_p
- *
- * @brief The private API for the IxNpeDl ImageMgr module
- * 
- * @{
- */
-
-#ifndef IXNPEDLIMAGEMGR_P_H
-#define IXNPEDLIMAGEMGR_P_H
-
-
-/*
- * Put the user defined include files required.
- */
-#include "IxNpeDl.h"
-#include "IxOsalTypes.h"
-
-
-/*
- * #defines and macros
- */
-
-/**
- * @def IX_NPEDL_IMAGEMGR_SIGNATURE
- *
- * @brief Signature found as 1st word in a microcode image library
- */
-#define IX_NPEDL_IMAGEMGR_SIGNATURE      0xDEADBEEF
-
-/**
- * @def IX_NPEDL_IMAGEMGR_END_OF_HEADER
- *
- * @brief Marks end of header in a microcode image library
- */
-#define IX_NPEDL_IMAGEMGR_END_OF_HEADER  0xFFFFFFFF
-
-/**
- * @def IX_NPEDL_IMAGEID_NPEID_OFFSET
- *
- * @brief Offset from LSB of NPE ID field in Image ID
- */
-#define IX_NPEDL_IMAGEID_NPEID_OFFSET      24
-
-/**
- * @def IX_NPEDL_IMAGEID_DEVICEID_OFFSET
- *
- * @brief Offset from LSB of Device ID field in Image ID
- */
-#define IX_NPEDL_IMAGEID_DEVICEID_OFFSET   28
-
-/**
- * @def IX_NPEDL_IMAGEID_FUNCTIONID_OFFSET
- *
- * @brief Offset from LSB of Functionality ID field in Image ID
- */
-#define IX_NPEDL_IMAGEID_FUNCTIONID_OFFSET 16
-
-/**
- * @def IX_NPEDL_IMAGEID_MAJOR_OFFSET
- *
- * @brief Offset from LSB of Major revision field in Image ID
- */
-#define IX_NPEDL_IMAGEID_MAJOR_OFFSET      8
-
-/**
- * @def IX_NPEDL_IMAGEID_MINOR_OFFSET
- *
- * @brief Offset from LSB of Minor revision field in Image ID
- */
-#define IX_NPEDL_IMAGEID_MINOR_OFFSET      0
-
-
-/**
- * @def IX_NPEDL_NPEID_FROM_IMAGEID_GET
- *
- * @brief Macro to extract NPE ID field from Image ID
- */
-#define IX_NPEDL_NPEID_FROM_IMAGEID_GET(imageId) \
-    (((imageId) >> IX_NPEDL_IMAGEID_NPEID_OFFSET) & \
-     IX_NPEDL_NPEIMAGE_NPEID_MASK)
-
-/**
- * @def IX_NPEDL_DEVICEID_FROM_IMAGEID_GET
- *
- * @brief Macro to extract NPE ID field from Image ID
- */
-#define IX_NPEDL_DEVICEID_FROM_IMAGEID_GET(imageId) \
-    (((imageId) >> IX_NPEDL_IMAGEID_DEVICEID_OFFSET) & \
-     IX_NPEDL_NPEIMAGE_DEVICEID_MASK)
-
-/**
- * @def IX_NPEDL_FUNCTIONID_FROM_IMAGEID_GET
- *
- * @brief Macro to extract Functionality ID field from Image ID
- */
-#define IX_NPEDL_FUNCTIONID_FROM_IMAGEID_GET(imageId) \
-    (((imageId) >> IX_NPEDL_IMAGEID_FUNCTIONID_OFFSET) & \
-     IX_NPEDL_NPEIMAGE_FIELD_MASK)
-
-/**
- * @def IX_NPEDL_MAJOR_FROM_IMAGEID_GET
- *
- * @brief Macro to extract Major revision field from Image ID
- */
-#define IX_NPEDL_MAJOR_FROM_IMAGEID_GET(imageId) \
-    (((imageId) >> IX_NPEDL_IMAGEID_MAJOR_OFFSET) & \
-     IX_NPEDL_NPEIMAGE_FIELD_MASK)
-
-/**
- * @def IX_NPEDL_MINOR_FROM_IMAGEID_GET
- *
- * @brief Macro to extract Minor revision field from Image ID
- */
-#define IX_NPEDL_MINOR_FROM_IMAGEID_GET(imageId) \
-    (((imageId) >> IX_NPEDL_IMAGEID_MINOR_OFFSET) & \
-     IX_NPEDL_NPEIMAGE_FIELD_MASK)
-
-
-/*
- * Prototypes for interface functions
- */
-
-/**
- * @fn IX_STATUS ixNpeDlImageMgrMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary)
- * 
- * @brief This instructs NPE Downloader to use client-supplied microcode image library.
- *
- * This function sets NPE Downloader to use a client-supplied microcode image library
- * instead of the standard image library which is included by the NPE Downloader.
- * 
- * @note THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.
- *       It will be removed in a future release.
- *       See API header file IxNpeDl.h for more information.             
- *
- * @pre
- *    - <i>clientImageLibrary</i> should point to a microcode image library valid for use
- *      by the NPE Downloader component.
- *
- * @post
- *    - the client-supplied image uibrary will be used for all subsequent operations
- *      performed by the NPE Downloader
- *
- * @return
- *      - IX_SUCCESS if the operation was successful
- *      - IX_FAIL if the client-supplied image library did not contain a valid signature
- */ 
-IX_STATUS
-ixNpeDlImageMgrMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary);
-
-
-/**
- * @fn IX_STATUS ixNpeDlImageMgrImageListExtract (IxNpeDlImageId *imageListPtr,
-                                                    UINT32 *numImages)
- * 
- * @brief Extracts a list of images available in the NPE microcode image library.
- *
- * @param IxNpeDlImageId* [out] imageListPtr - pointer to array to contain
- *                                                 a list of images. If NULL,
- *                                                 only the number of images 
- *                                                 is returned (in
- *                                                 <i>numImages</i>)
- * @param UINT32* [inout] numImages - As input, it points to a variable
- *                                      containing the number of images which
- *                                      can be stored in the
- *                                      <i>imageListPtr</i> array. Its value
- *                                      is ignored as input if
- *                                      <i>imageListPtr</i> is NULL. As an
- *                                      output, it will contain number of
- *                                      images in the image library.
- * 
- * This function reads the header of the microcode image library and extracts a list of the
- * images available in the image library.  It can also be used to find the number of
- * images in the image library.
- * 
- * @note THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.
- *       It will be removed in a future release.
- *       See API header file IxNpeDl.h for more information.             
- *
- * @pre
- *    - if <i>imageListPtr</i> != NULL, <i>numImages</i> should reflect the
- *      number of image Id elements the <i>imageListPtr</i> can contain.
- *
- * @post
- *    - <i>numImages</i> will reflect the number of image Id's found in the
- *      microcode image library.
- *
- * @return
- *      - IX_SUCCESS if the operation was successful
- *      - IX_FAIL otherwise
- */ 
-IX_STATUS
-ixNpeDlImageMgrImageListExtract (IxNpeDlImageId *imageListPtr,
-				   UINT32 *numImages);
-
-
-/**
- * @fn IX_STATUS ixNpeDlImageMgrImageLocate (IxNpeDlImageId *imageId,
-                                               UINT32 **imagePtr,
-                                               UINT32 *imageSize)
- * 
- * @brief Finds a image block in the NPE microcode image library. 
- *
- * @param IxNpeDlImageId* [in] imageId - the id of the image to locate
- * @param UINT32** [out] imagePtr        - pointer to the image in memory
- * @param UINT32* [out] imageSize        - size (in 32-bit words) of image
- * 
- * This function examines the header of the microcode image library for the location
- * and size of the specified image.
- * 
- * @note THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.
- *       It will be removed in a future release.
- *       See API header file IxNpeDl.h for more information.             
- *
- * @pre
- *
- * @post
- *
- * @return 
- *      - IX_SUCCESS if the operation was successful
- *      - IX_FAIL otherwise
- */ 
-IX_STATUS
-ixNpeDlImageMgrImageLocate (IxNpeDlImageId *imageId,
-			      UINT32 **imagePtr,
-			      UINT32 *imageSize);
-
-/**
- * @fn IX_STATUS ixNpeDlImageMgrLatestImageExtract (IxNpeDlImageId *imageId)
- * 
- * @brief Finds the most recent version of an image in the NPE image library. 
- *
- * @param IxNpeDlImageId* [inout] imageId - the id of the image 
- * 
- * This function determines the most recent version of a specified image by its 
- * higest major release and minor revision numbers
- * 
- * @note THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.
- *       It will be removed in a future release.
- *       See API header file IxNpeDl.h for more information.             
- *
- * @pre
- *
- * @post
- *
- * @return 
- *      - IX_SUCCESS if the operation was successful
- *      - IX_FAIL otherwise
- */ 
-IX_STATUS
-ixNpeDlImageMgrLatestImageExtract (IxNpeDlImageId *imageId);
-
-/**
- * @fn void ixNpeDlImageMgrStatsShow (void)
- *
- * @brief This function will display the statistics of the IxNpeDl ImageMgr
- *        module
- *
- * @return none
- */
-void
-ixNpeDlImageMgrStatsShow (void);
-
-
-/**
- * @fn void ixNpeDlImageMgrStatsReset (void)
- *
- * @brief This function will reset the statistics of the IxNpeDl ImageMgr
- *        module
- *
- * @return none
- */
-void
-ixNpeDlImageMgrStatsReset (void);
-
-
-/**
- * @fn IX_STATUS ixNpeDlImageMgrImageGet (UINT32 *imageLibrary,
-                                          UINT32 imageId,
-                                          UINT32 **imagePtr,
-                                          UINT32 *imageSize)
- * 
- * @brief Finds a image block in the NPE microcode image library. 
- *
- * @param UINT32*  [in]  imageLibrary - the image library to use
- * @param UINT32   [in]  imageId      - the id of the image to locate
- * @param UINT32** [out] imagePtr     - pointer to the image in memory
- * @param UINT32*  [out] imageSize    - size (in 32-bit words) of image
- * 
- * This function examines the header of the specified microcode image library
- * for the location and size of the specified image.  It returns a pointer to
- * the image in the <i>imagePtr</i> parameter.
- * If no image library is specified (imageLibrary == NULL), then the default
- * built-in image library will be used.
- * 
- * @pre
- *
- * @post
- *
- * @return 
- *      - IX_SUCCESS if the operation was successful
- *      - IX_FAIL otherwise
- */ 
-IX_STATUS
-ixNpeDlImageMgrImageFind (UINT32 *imageLibrary,
-                          UINT32 imageId,
-			  UINT32 **imagePtr,
-			  UINT32 *imageSize);
-
-
-#endif /* IXNPEDLIMAGEMGR_P_H */
-
-/**
- * @} defgroup IxNpeDlImageMgr_p
- */
diff --git a/drivers/net/npe/include/IxNpeDlMacros_p.h b/drivers/net/npe/include/IxNpeDlMacros_p.h
deleted file mode 100644
index 771fe74..0000000
--- a/drivers/net/npe/include/IxNpeDlMacros_p.h
+++ /dev/null
@@ -1,390 +0,0 @@
-/**
- * @file IxNpeDlMacros_p.h
- *
- * @author Intel Corporation
- * @date 21 January 2002
- *
- * @brief This file contains the macros for the IxNpeDl component.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxNpeDlMacros_p IxNpeDlMacros_p
- *
- * @brief Macros for the IxNpeDl component.
- * 
- * @{
- */
-
-#ifndef IXNPEDLMACROS_P_H
-#define IXNPEDLMACROS_P_H
-
-
-/*
- * Put the user defined include files required.
- */
-#if (CPU != XSCALE)
-/* To support IxNpeDl unit tests... */
-#include <stdio.h>
-#include "test/IxNpeDlTestReg.h"
-
-#else   
-#include "IxOsal.h"
-
-#endif
-
-
-/*
- * Typedefs
- */
-
-/**
- * @typedef IxNpeDlTraceTypes
- * @brief Enumeration defining IxNpeDl trace levels
- */
-typedef enum
-{
-    IX_NPEDL_TRACE_OFF,     /**< no trace */
-    IX_NPEDL_DEBUG,         /**< debug */
-    IX_NPEDL_FN_ENTRY_EXIT  /**< function entry/exit */
-} IxNpeDlTraceTypes;
-
-
-/*
- * #defines and macros.
- */
-
-/* Implementation of the following macros for use with IxNpeDl unit test code */
-#if (CPU != XSCALE)
-
-
-/**
- * @def IX_NPEDL_TRACE_LEVEL
- *
- * @brief IxNpeDl debug trace level
- */
-#define IX_NPEDL_TRACE_LEVEL IX_NPEDL_FN_ENTRY_EXIT
-
-/**
- * @def IX_NPEDL_ERROR_REPORT
- *
- * @brief Mechanism for reporting IxNpeDl software errors
- *
- * @param char* [in] STR - Error string to report
- *
- * This macro simply prints the error string passed.
- * Intended for use with IxNpeDl unit test code.
- *
- * @return none
- */
-#define IX_NPEDL_ERROR_REPORT(STR) printf ("IxNpeDl ERROR: %s\n", (STR));
-
-/**
- * @def IX_NPEDL_WARNING_REPORT
- *
- * @brief Mechanism for reporting IxNpeDl software errors
- *
- * @param char* [in] STR - Error string to report
- *
- * This macro simply prints the error string passed.
- * Intended for use with IxNpeDl unit test code.
- *
- * @return none
- */
-#define IX_NPEDL_WARNING_REPORT(STR) printf ("IxNpeDl WARNING: %s\n", (STR));
-
-/**
- * @def IX_NPEDL_TRACE0
- *
- * @brief Mechanism for tracing debug for the IxNpeDl component, for no arguments
- *
- * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values
- * @param char* [in] STR - Trace string
- *
- * This macro simply prints the trace string passed, if the level is supported. 
- * Intended for use with IxNpeDl unit test code.
- *
- * @return none
- */
-#define IX_NPEDL_TRACE0(LEVEL, STR) \
-{ \
-    if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \
-    { \
-        printf ("IxNpeDl TRACE: "); \
-        printf ((STR)); \
-        printf ("\n"); \
-    } \
-}
-
- /**
- * @def IX_NPEDL_TRACE1
- *
- * @brief Mechanism for tracing debug for the IxNpeDl component, with 1 argument
- *
- * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values
- * @param char* [in] STR - Trace string
- * @param argType [in] ARG1 - Argument to trace
- *
- * This macro simply prints the trace string passed, if the level is supported.
- * Intended for use with IxNpeDl unit test code.
- *
- * @return none
- */
-#define IX_NPEDL_TRACE1(LEVEL, STR, ARG1) \
-{ \
-    if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \
-    { \
-        printf ("IxNpeDl TRACE: "); \
-        printf (STR, ARG1); \
-        printf ("\n"); \
-    } \
-}
-
-/**
- * @def IX_NPEDL_TRACE2
- *
- * @brief Mechanism for tracing debug for the IxNpeDl component, with 2 arguments
- *
- * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values
- * @param char* [in] STR - Trace string
- * @param argType [in] ARG1 - Argument to trace
- * @param argType [in] ARG2 - Argument to trace
- *
- * This macro simply prints the trace string passed, if the level is supported. 
- * Intended for use with IxNpeDl unit test code.
- *
- * @return none
- */
-#define IX_NPEDL_TRACE2(LEVEL, STR, ARG1, ARG2) \
-{ \
-    if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \
-    { \
-        printf ("IxNpeDl TRACE: "); \
-        printf (STR, ARG1, ARG2); \
-        printf ("\n"); \
-    } \
-}
-
-
-/**
- * @def IX_NPEDL_REG_WRITE
- *
- * @brief Mechanism for writing to a memory-mapped register
- *
- * @param UINT32 [in] base   - Base memory address for this NPE's registers
- * @param UINT32 [in] offset - Offset from base memory address
- * @param UINT32 [in] value  - Value to write to register
- *
- * This macro calls a function from Unit Test code to write a register.  This
- * allows extra flexibility for unit testing of the IxNpeDl component.
- *
- * @return none
- */
-#define IX_NPEDL_REG_WRITE(base, offset, value) \
-{ \
-    ixNpeDlTestRegWrite (base, offset, value); \
-}
-
-
-/**
- * @def IX_NPEDL_REG_READ
- *
- * @brief Mechanism for reading from a memory-mapped register
- *
- * @param UINT32 [in] base     - Base memory address for this NPE's registers
- * @param UINT32 [in] offset   - Offset from base memory address
- * @param UINT32 *[out] value  - Value read from register
- *
- * This macro calls a function from Unit Test code to read a register.  This
- * allows extra flexibility for unit testing of the IxNpeDl component.
- *
- * @return none
- */
-#define IX_NPEDL_REG_READ(base, offset, value) \
-{ \
-    ixNpeDlTestRegRead (base, offset, value); \
-}
-
-
-/* Implementation of the following macros when integrated with IxOsal */
-#else  /* #if (CPU != XSCALE) */
-
-
-/**
- * @def IX_NPEDL_TRACE_LEVEL
- *
- * @brief IxNpeDl debug trace level
- */
-#define IX_NPEDL_TRACE_LEVEL IX_NPEDL_DEBUG
-
-
-/**
- * @def IX_NPEDL_ERROR_REPORT
- *
- * @brief Mechanism for reporting IxNpeDl software errors
- *
- * @param char* [in] STR - Error string to report
- *
- * This macro is used to report IxNpeDl software errors.
- *
- * @return none
- */
-#define IX_NPEDL_ERROR_REPORT(STR) \
-    ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, STR, 0, 0, 0, 0, 0, 0);
-
-/**
- * @def IX_NPEDL_WARNING_REPORT
- *
- * @brief Mechanism for reporting IxNpeDl software warnings
- *
- * @param char* [in] STR - Warning string to report
- *
- * This macro is used to report IxNpeDl software warnings.
- *
- * @return none
- */
-#define IX_NPEDL_WARNING_REPORT(STR) \
-    ixOsalLog (IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, STR, 0, 0, 0, 0, 0, 0);
-
-
-/**
- * @def IX_NPEDL_TRACE0
- *
- * @brief Mechanism for tracing debug for the IxNpeDl component, for no arguments
- *
- * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values
- * @param char* [in] STR - Trace string
- *
- * This macro simply prints the trace string passed, if the level is supported.
- *
- * @return none
- */
-#define IX_NPEDL_TRACE0(LEVEL, STR) \
-{ \
-    if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \
-    { \
-        if (LEVEL == IX_NPEDL_FN_ENTRY_EXIT) \
-        { \
-            ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, IX_OSAL_LOG_DEV_STDOUT, STR, 0, 0, 0, 0, 0, 0); \
-        } \
-        else if (LEVEL == IX_NPEDL_DEBUG) \
-        { \
-            ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, STR, 0, 0, 0, 0, 0, 0); \
-        } \
-    } \
-}
-
-/**
- * @def IX_NPEDL_TRACE1
- *
- * @brief Mechanism for tracing debug for the IxNpeDl component, with 1 argument
- *
- * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values
- * @param char* [in] STR - Trace string
- * @param argType [in] ARG1 - Argument to trace
- *
- * This macro simply prints the trace string passed, if the level is supported. 
- *
- * @return none
- */
-#define IX_NPEDL_TRACE1(LEVEL, STR, ARG1) \
-{ \
-    if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \
-    { \
-        if (LEVEL == IX_NPEDL_FN_ENTRY_EXIT) \
-        { \
-            ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, IX_OSAL_LOG_DEV_STDOUT, STR, ARG1, 0, 0, 0, 0, 0); \
-        } \
-        else if (LEVEL == IX_NPEDL_DEBUG) \
-        { \
-            ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, STR, ARG1, 0, 0, 0, 0, 0); \
-        } \
-    } \
-}
-
-/**
- * @def IX_NPEDL_TRACE2
- *
- * @brief Mechanism for tracing debug for the IxNpeDl component, with 2 arguments
- *
- * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values
- * @param char* [in] STR - Trace string
- * @param argType [in] ARG1 - Argument to trace
- * @param argType [in] ARG2 - Argument to trace
- *
- * This macro simply prints the trace string passed, if the level is supported. 
- *
- * @return none
- */
-#define IX_NPEDL_TRACE2(LEVEL, STR, ARG1, ARG2) \
-{ \
-    if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \
-    { \
-        if (LEVEL == IX_NPEDL_FN_ENTRY_EXIT) \
-        { \
-            ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, IX_OSAL_LOG_DEV_STDOUT, STR, ARG1, ARG2, 0, 0, 0, 0); \
-        } \
-        else if (LEVEL == IX_NPEDL_DEBUG) \
-        { \
-            ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, STR, ARG1, ARG2, 0, 0, 0, 0); \
-        } \
-    } \
-}
-
-/**
- * @def IX_NPEDL_REG_WRITE
- *
- * @brief Mechanism for writing to a memory-mapped register
- *
- * @param UINT32 [in] base   - Base memory address for this NPE's registers
- * @param UINT32 [in] offset - Offset from base memory address
- * @param UINT32 [in] value  - Value to write to register
- *
- * This macro forms the address of the register from base address + offset, and 
- * dereferences that address to write the contents of the register.
- *
- * @return none
- */
-#define IX_NPEDL_REG_WRITE(base, offset, value) \
-    IX_OSAL_WRITE_LONG(((base) + (offset)), (value))
-
-
-
-/**
- * @def IX_NPEDL_REG_READ
- *
- * @brief Mechanism for reading from a memory-mapped register
- *
- * @param UINT32 [in] base    - Base memory address for this NPE's registers
- * @param UINT32 [in] offset  - Offset from base memory address
- * @param UINT32 *[out] value  - Value read from register
- *
- * This macro forms the address of the register from base address + offset, and 
- * dereferences that address to read the register contents.
- *
- * @return none
- */
-#define IX_NPEDL_REG_READ(base, offset, value) \
-    *(value) = IX_OSAL_READ_LONG(((base) + (offset)))
-
-#endif  /* #if (CPU != XSCALE) */
-
-#endif /* IXNPEDLMACROS_P_H */
-
-/**
- * @} defgroup IxNpeDlMacros_p
- */
diff --git a/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h b/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h
deleted file mode 100644
index f6c2e46..0000000
--- a/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h
+++ /dev/null
@@ -1,869 +0,0 @@
-/**
- * @file IxNpeDlNpeMgrEcRegisters_p.h
- *
- * @author Intel Corporation
- * @date 14 December 2001
-
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-
-#ifndef IXNPEDLNPEMGRECREGISTERS_P_H
-#define IXNPEDLNPEMGRECREGISTERS_P_H
-
-#include "IxOsal.h"
-
-/*
- * Base Memory Addresses for accessing NPE registers
- */
-
-#define IX_NPEDL_NPE_BASE (IX_OSAL_IXP400_PERIPHERAL_PHYS_BASE)
-
-#define IX_NPEDL_NPEA_OFFSET (0x6000) /**< NPE-A register base offset */
-#define IX_NPEDL_NPEB_OFFSET (0x7000) /**< NPE-B register base offset */
-#define IX_NPEDL_NPEC_OFFSET (0x8000) /**< NPE-C register base offset */
-
-/**
- * @def IX_NPEDL_NPEBASEADDRESS_NPEA
- * @brief Base Memory Address of NPE-A Configuration Bus registers
- */
-#define IX_NPEDL_NPEBASEADDRESS_NPEA (IX_NPEDL_NPE_BASE + IX_NPEDL_NPEA_OFFSET)
-
-/**
- * @def IX_NPEDL_NPEBASEADDRESS_NPEB
- * @brief Base Memory Address of NPE-B Configuration Bus registers
- */
-#define IX_NPEDL_NPEBASEADDRESS_NPEB (IX_NPEDL_NPE_BASE + IX_NPEDL_NPEB_OFFSET)
-
-/**
- * @def IX_NPEDL_NPEBASEADDRESS_NPEC
- * @brief Base Memory Address of NPE-C Configuration Bus registers
- */
-#define IX_NPEDL_NPEBASEADDRESS_NPEC (IX_NPEDL_NPE_BASE + IX_NPEDL_NPEC_OFFSET)
-
-
-/*
- * Instruction Memory Size (in words) for each NPE 
- */
-
-/**
- * @def IX_NPEDL_INS_MEMSIZE_WORDS_NPEA
- * @brief Size (in words) of NPE-A Instruction Memory
- */
-#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEA     4096
-
-/**
- * @def IX_NPEDL_INS_MEMSIZE_WORDS_NPEB
- * @brief Size (in words) of NPE-B Instruction Memory
- */
-#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEB     2048
-
-/**
- * @def IX_NPEDL_INS_MEMSIZE_WORDS_NPEC
- * @brief Size (in words) of NPE-B Instruction Memory
- */
-#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEC     2048
-
-
-/*
- * Data Memory Size (in words) for each NPE 
- */
-
-/**
- * @def IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA
- * @brief Size (in words) of NPE-A Data Memory
- */
-#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA    2048
-
-/**
- * @def IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB
- * @brief Size (in words) of NPE-B Data Memory
- */
-#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB    2048
-
-/**
- * @def IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC
- * @brief Size (in words) of NPE-C Data Memory
- */
-#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC    2048
-
-
-/*
- * Configuration Bus Register offsets (in bytes) from NPE Base Address
- */
-
-/**
- * @def IX_NPEDL_REG_OFFSET_EXAD
- * @brief Offset (in bytes) of EXAD (Execution Address) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_EXAD             0x00000000		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_EXDATA
- * @brief Offset (in bytes) of EXDATA (Execution Data) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_EXDATA           0x00000004
-
-/**
- * @def IX_NPEDL_REG_OFFSET_EXCTL
- * @brief Offset (in bytes) of EXCTL (Execution Control) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_EXCTL            0x00000008		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_EXCT
- * @brief Offset (in bytes) of EXCT (Execution Count) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_EXCT 	     0x0000000C		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_AP0
- * @brief Offset (in bytes) of AP0 (Action Point 0) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_AP0	             0x00000010		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_AP1
- * @brief Offset (in bytes) of AP1 (Action Point 1) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_AP1	             0x00000014		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_AP2
- * @brief Offset (in bytes) of AP2 (Action Point 2) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_AP2	             0x00000018		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_AP3
- * @brief Offset (in bytes) of AP3 (Action Point 3) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_AP3	             0x0000001C		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_WFIFO
- * @brief Offset (in bytes) of WFIFO (Watchpoint FIFO) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_WFIFO            0x00000020
-
-/**
- * @def IX_NPEDL_REG_OFFSET_WC
- * @brief Offset (in bytes) of WC (Watch Count) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_WC	             0x00000024 		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_PROFCT
- * @brief Offset (in bytes) of PROFCT (Profile Count) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_PROFCT           0x00000028		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_STAT
- * @brief Offset (in bytes) of STAT (Messaging Status) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_STAT	     0x0000002C		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_CTL
- * @brief Offset (in bytes) of CTL (Messaging Control) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_CTL	             0x00000030		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_MBST
- * @brief Offset (in bytes) of MBST (Mailbox Status) register from NPE Base
- *        Address
- */
-#define IX_NPEDL_REG_OFFSET_MBST	     0x00000034		
-
-/**
- * @def IX_NPEDL_REG_OFFSET_FIFO
- * @brief Offset (in bytes) of FIFO (messaging in/out FIFO) register from NPE
- *        Base Address
- */
-#define IX_NPEDL_REG_OFFSET_FIFO	     0x00000038		
-
-
-/*
- * Non-zero reset values for the Configuration Bus registers
- */
-
-/**
- * @def IX_NPEDL_REG_RESET_FIFO
- * @brief Reset value for Mailbox (MBST) register
- *        NOTE that if used, it should be complemented with an NPE intruction
- *        to clear the Mailbox at the NPE side as well
- */
-#define IX_NPEDL_REG_RESET_MBST              0x0000F0F0
-
-
-/*
- * Bit-masks used to read/write particular bits in Configuration Bus registers
- */
-
-/**
- * @def IX_NPEDL_MASK_WFIFO_VALID
- * @brief Masks the VALID bit in the WFIFO register
- */
-#define IX_NPEDL_MASK_WFIFO_VALID            0x80000000
-
-/**
- * @def IX_NPEDL_MASK_STAT_OFNE
- * @brief Masks the OFNE bit in the STAT register
- */
-#define IX_NPEDL_MASK_STAT_OFNE              0x00010000
-
-/**
- * @def IX_NPEDL_MASK_STAT_IFNE
- * @brief Masks the IFNE bit in the STAT register
- */
-#define IX_NPEDL_MASK_STAT_IFNE              0x00080000
-
-
-/*
- * EXCTL (Execution Control) Register commands 
-*/
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_NPE_STEP
- * @brief EXCTL Command to Step execution of an NPE Instruction
- */
-
-#define IX_NPEDL_EXCTL_CMD_NPE_STEP          0x01
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_NPE_START
- * @brief EXCTL Command to Start NPE execution
- */
-#define IX_NPEDL_EXCTL_CMD_NPE_START         0x02
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_NPE_STOP
- * @brief EXCTL Command to Stop NPE execution
- */
-#define IX_NPEDL_EXCTL_CMD_NPE_STOP          0x03
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE
- * @brief EXCTL Command to Clear NPE instruction pipeline
- */
-#define IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE      0x04
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_RD_INS_MEM
- * @brief EXCTL Command to read NPE instruction memory at address in EXAD
- *        register and return value in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_RD_INS_MEM        0x10
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_WR_INS_MEM
- * @brief EXCTL Command to write NPE instruction memory at address in EXAD
- *        register with data in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_WR_INS_MEM        0x11
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_RD_DATA_MEM
- * @brief EXCTL Command to read NPE data memory at address in EXAD
- *        register and return value in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_RD_DATA_MEM       0x12
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_WR_DATA_MEM
- * @brief EXCTL Command to write NPE data memory at address in EXAD
- *        register with data in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_WR_DATA_MEM       0x13
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_RD_ECS_REG
- * @brief EXCTL Command to read Execution Access register at address in EXAD
- *        register and return value in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_RD_ECS_REG        0x14
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_WR_ECS_REG
- * @brief EXCTL Command to write Execution Access register at address in EXAD
- *        register with data in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_WR_ECS_REG        0x15
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT
- * @brief EXCTL Command to clear Profile Count register
- */
-#define IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT   0x0C
-
-
-/*
- * EXCTL (Execution Control) Register status bit masks
- */
-
-/**
- * @def IX_NPEDL_EXCTL_STATUS_RUN
- * @brief Masks the RUN status bit in the EXCTL register
- */
-#define IX_NPEDL_EXCTL_STATUS_RUN            0x80000000
-
-/**
- * @def IX_NPEDL_EXCTL_STATUS_STOP
- * @brief Masks the STOP status bit in the EXCTL register
- */
-#define IX_NPEDL_EXCTL_STATUS_STOP           0x40000000
-
-/**
- * @def IX_NPEDL_EXCTL_STATUS_CLEAR
- * @brief Masks the CLEAR status bit in the EXCTL register
- */
-#define IX_NPEDL_EXCTL_STATUS_CLEAR          0x20000000
-
-/**
- * @def IX_NPEDL_EXCTL_STATUS_ECS_K
- * @brief Masks the K (pipeline Klean) status bit in the EXCTL register
- */
-#define IX_NPEDL_EXCTL_STATUS_ECS_K          0x00800000
-
-
-/*
- * Executing Context Stack (ECS) level registers 
- */
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_0
- * @brief Execution Access register address for register 0 at Backgound 
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_0           0x00
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_1
- * @brief Execution Access register address for register 1 at Backgound 
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_1           0x01
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_2
- * @brief Execution Access register address for register 2 at Backgound 
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_2           0x02
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_0
- * @brief Execution Access register address for register 0 at Priority 1
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0        0x04
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_1
- * @brief Execution Access register address for register 1 at Priority 1
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_1        0x05
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_2
- * @brief Execution Access register address for register 2 at Priority 1
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_2        0x06
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_0
- * @brief Execution Access register address for register 0 at Priority 2
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0        0x08
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_1
- * @brief Execution Access register address for register 1 at Priority 2
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_1        0x09
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_2
- * @brief Execution Access register address for register 2 at Priority 2
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_2        0x0A
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_0
- * @brief Execution Access register address for register 0 at Debug
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_0          0x0C
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_1
- * @brief Execution Access register address for register 1 at Debug 
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_1          0x0D
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_2
- * @brief Execution Access register address for register 2 at Debug 
- *        Executing Context Stack level
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_2          0x0E
-
-/**
- * @def IX_NPEDL_ECS_INSTRUCT_REG
- * @brief Execution Access register address for NPE Instruction Register 
- */
-#define IX_NPEDL_ECS_INSTRUCT_REG            0x11
-
-
-/*
- * Execution Access register reset values
- */
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_0_RESET
- * @brief Reset value for Execution Access Background ECS level register 0
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_0_RESET     0xA0000000
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_1_RESET
- * @brief Reset value for Execution Access Background ECS level register 1
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_1_RESET     0x01000000
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_2_RESET
- * @brief Reset value for Execution Access Background ECS level register 2
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_2_RESET     0x00008000
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_0_RESET
- * @brief Reset value for Execution Access Priority 1 ECS level register 0
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0_RESET  0x20000080
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_1_RESET
- * @brief Reset value for Execution Access Priority 1 ECS level register 1
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_1_RESET  0x01000000
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_2_RESET
- * @brief Reset value for Execution Access Priority 1 ECS level register 2
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_2_RESET  0x00008000
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_0_RESET
- * @brief Reset value for Execution Access Priority 2 ECS level register 0
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0_RESET  0x20000080
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_1_RESET
- * @brief Reset value for Execution Access Priority 2 ECS level register 1
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_1_RESET  0x01000000
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_2_RESET
- * @brief Reset value for Execution Access Priority 2 ECS level register 2
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_2_RESET  0x00008000
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_0_RESET
- * @brief Reset value for Execution Access Debug ECS level register 0
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_0_RESET    0x20000000
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_1_RESET
- * @brief Reset value for Execution Access Debug ECS level register 1
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_1_RESET    0x00000000
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_2_RESET
- * @brief Reset value for Execution Access Debug ECS level register 2
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_2_RESET    0x001E0000
-
-/**
- * @def IX_NPEDL_ECS_INSTRUCT_REG_RESET
- * @brief Reset value for Execution Access NPE Instruction Register
- */
-#define IX_NPEDL_ECS_INSTRUCT_REG_RESET      0x1003C00F
-
-
-/*
- * masks used to read/write particular bits in Execution Access registers
- */
-
-/**
- * @def IX_NPEDL_MASK_ECS_REG_0_ACTIVE
- * @brief Mask the A (Active) bit in Execution Access Register 0 of all ECS
- *        levels
- */
-#define IX_NPEDL_MASK_ECS_REG_0_ACTIVE       0x80000000
-
-/**
- * @def IX_NPEDL_MASK_ECS_REG_0_NEXTPC
- * @brief Mask the NextPC bits in Execution Access Register 0 of all ECS
- *        levels (except Debug ECS level)
- */
-#define IX_NPEDL_MASK_ECS_REG_0_NEXTPC       0x1FFF0000
-
-/**
- * @def IX_NPEDL_MASK_ECS_REG_0_LDUR
- * @brief Mask the LDUR bits in Execution Access Register 0 of all ECS levels
- */
-#define IX_NPEDL_MASK_ECS_REG_0_LDUR         0x00000700
-
-/**
- * @def IX_NPEDL_MASK_ECS_REG_1_CCTXT
- * @brief Mask the NextPC bits in Execution Access Register 1 of all ECS levels
- */
-#define IX_NPEDL_MASK_ECS_REG_1_CCTXT        0x000F0000
-
-/**
- * @def IX_NPEDL_MASK_ECS_REG_1_SELCTXT
- * @brief Mask the NextPC bits in Execution Access Register 1 of all ECS levels
- */
-#define IX_NPEDL_MASK_ECS_REG_1_SELCTXT      0x0000000F
-
-/**
- * @def IX_NPEDL_MASK_ECS_DBG_REG_2_IF
- * @brief Mask the IF bit in Execution Access Register 2 of Debug ECS level
- */
-#define IX_NPEDL_MASK_ECS_DBG_REG_2_IF       0x00100000
-
-/**
- * @def IX_NPEDL_MASK_ECS_DBG_REG_2_IE
- * @brief Mask the IE bit in Execution Access Register 2 of Debug ECS level
- */
-#define IX_NPEDL_MASK_ECS_DBG_REG_2_IE       0x00080000
-
-
-/*
- * Bit-Offsets from LSB of particular bit-fields in Execution Access registers
- */
-
-/**
- * @def IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC
- * @brief LSB-offset of NextPC field in Execution Access Register 0 of all ECS
- *        levels (except Debug ECS level)
- */
-#define IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC     16 
-
-/**
- * @def IX_NPEDL_OFFSET_ECS_REG_0_LDUR
- * @brief LSB-offset of LDUR field in Execution Access Register 0 of all ECS
- *        levels
- */
-#define IX_NPEDL_OFFSET_ECS_REG_0_LDUR        8
-
-/**
- * @def IX_NPEDL_OFFSET_ECS_REG_1_CCTXT
- * @brief LSB-offset of CCTXT field in Execution Access Register 1 of all ECS
- *        levels
- */
-#define IX_NPEDL_OFFSET_ECS_REG_1_CCTXT      16
-
-/**
- * @def IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT
- * @brief LSB-offset of SELCTXT field in Execution Access Register 1 of all ECS
- *        levels
- */
-#define IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT     0
-
-
-/*
- * NPE core & co-processor instruction templates to load into NPE Instruction 
- * Register, for read/write of NPE register file registers
- */
-
-/**
- * @def IX_NPEDL_INSTR_RD_REG_BYTE
- * @brief NPE Instruction, used to read an 8-bit NPE internal logical register
- *        and return the value in the EXDATA register (aligned to MSB).
- *        NPE Assembler instruction:  "mov8 d0, d0  &&& DBG_WrExec"
- */
-#define IX_NPEDL_INSTR_RD_REG_BYTE    0x0FC00000
-
-/**
- * @def IX_NPEDL_INSTR_RD_REG_SHORT
- * @brief NPE Instruction, used to read a 16-bit NPE internal logical register
- *        and return the value in the EXDATA register (aligned to MSB).
- *        NPE Assembler instruction:  "mov16 d0, d0  &&& DBG_WrExec"
- */
-#define IX_NPEDL_INSTR_RD_REG_SHORT   0x0FC08010
-
-/**
- * @def IX_NPEDL_INSTR_RD_REG_WORD
- * @brief NPE Instruction, used to read a 16-bit NPE internal logical register
- *        and return the value in the EXDATA register.
- *        NPE Assembler instruction:  "mov32 d0, d0  &&& DBG_WrExec"
- */
-#define IX_NPEDL_INSTR_RD_REG_WORD    0x0FC08210
-
-/**
- * @def IX_NPEDL_INSTR_WR_REG_BYTE
- * @brief NPE Immediate-Mode Instruction, used to write an 8-bit NPE internal
- *        logical register.
- *        NPE Assembler instruction:  "mov8 d0, #0"
- */
-#define IX_NPEDL_INSTR_WR_REG_BYTE    0x00004000
-
-/**
- * @def IX_NPEDL_INSTR_WR_REG_SHORT
- * @brief NPE Immediate-Mode Instruction, used to write a 16-bit NPE internal
- *        logical register.
- *        NPE Assembler instruction:  "mov16 d0, #0"
- */
-#define IX_NPEDL_INSTR_WR_REG_SHORT   0x0000C000
-
-/**
- * @def IX_NPEDL_INSTR_RD_FIFO
- * @brief NPE Immediate-Mode Instruction, used to write a 16-bit NPE internal
- *        logical register.
- *        NPE Assembler instruction:  "cprd32 d0    &&& DBG_RdInFIFO"
- */
-#define IX_NPEDL_INSTR_RD_FIFO        0x0F888220    
-
-/**
- * @def IX_NPEDL_INSTR_RESET_MBOX
- * @brief NPE Instruction, used to reset Mailbox (MBST) register
- *        NPE Assembler instruction:  "mov32 d0, d0  &&& DBG_ClearM"
- */
-#define IX_NPEDL_INSTR_RESET_MBOX     0x0FAC8210
-
-
-/*
- * Bit-offsets from LSB, of particular bit-fields in an NPE instruction
- */
-
-/**
- * @def IX_NPEDL_OFFSET_INSTR_SRC
- * @brief LSB-offset to SRC (source operand) field of an NPE Instruction
- */
-#define IX_NPEDL_OFFSET_INSTR_SRC              4
-
-/**
- * @def IX_NPEDL_OFFSET_INSTR_DEST
- * @brief LSB-offset to DEST (destination operand) field of an NPE Instruction
- */
-#define IX_NPEDL_OFFSET_INSTR_DEST             9
-
-/**
- * @def IX_NPEDL_OFFSET_INSTR_COPROC
- * @brief LSB-offset to COPROC (coprocessor instruction) field of an NPE
- *        Instruction
- */
-#define IX_NPEDL_OFFSET_INSTR_COPROC          18
-
-
-/*
- * masks used to read/write particular bits of an NPE Instruction
- */
-
-/**
- * @def IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA
- * @brief Mask the bits of 16-bit data value (least-sig 5 bits) to be used in
- *        SRC field of immediate-mode NPE instruction
- */
-#define IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA         0x1F 
-
-/**
- * @def IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA
- * @brief Mask the bits of 16-bit data value (most-sig 11 bits) to be used in
- *        COPROC field of immediate-mode NPE instruction
- */
-#define IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA      0xFFE0
-
-/**
- * @def IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA
- * @brief LSB offset of the bit-field of 16-bit data value (most-sig 11 bits)
- *        to be used in COPROC field of immediate-mode NPE instruction
- */
-#define IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA    5
-
-/**
- * @def IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA
- * @brief Number of left-shifts required to align most-sig 11 bits of 16-bit
- *        data value into COPROC field of immediate-mode NPE instruction
- */
-#define IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA \
-     (IX_NPEDL_OFFSET_INSTR_COPROC - IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA)
-
-/**
- * @def IX_NPEDL_WR_INSTR_LDUR
- * @brief LDUR value used with immediate-mode NPE Instructions by the NpeDl
- *        for writing to NPE internal logical registers
- */
-#define IX_NPEDL_WR_INSTR_LDUR                     1
-
-/**
- * @def IX_NPEDL_RD_INSTR_LDUR
- * @brief LDUR value used with NON-immediate-mode NPE Instructions by the NpeDl
- *        for reading from NPE internal logical registers
- */
-#define IX_NPEDL_RD_INSTR_LDUR                     0
-
-
-/**
- * @enum IxNpeDlCtxtRegNum
- * @brief Numeric values to identify the NPE internal Context Store registers
- */
-typedef enum
-{
-    IX_NPEDL_CTXT_REG_STEVT = 0,  /**< identifies STEVT   */
-    IX_NPEDL_CTXT_REG_STARTPC,    /**< identifies STARTPC */
-    IX_NPEDL_CTXT_REG_REGMAP,     /**< identifies REGMAP  */
-    IX_NPEDL_CTXT_REG_CINDEX,     /**< identifies CINDEX  */
-    IX_NPEDL_CTXT_REG_MAX         /**< Total number of Context Store registers */
-} IxNpeDlCtxtRegNum;
-
-
-/*
- * NPE Context Store register logical addresses
- */
-
-/**
- * @def IX_NPEDL_CTXT_REG_ADDR_STEVT
- * @brief Logical address of STEVT NPE internal Context Store register
- */
-#define IX_NPEDL_CTXT_REG_ADDR_STEVT      0x0000001B
-
-/**
- * @def IX_NPEDL_CTXT_REG_ADDR_STARTPC
- * @brief Logical address of STARTPC NPE internal Context Store register
- */
-#define IX_NPEDL_CTXT_REG_ADDR_STARTPC    0x0000001C
-
-/**
- * @def IX_NPEDL_CTXT_REG_ADDR_REGMAP
- * @brief Logical address of REGMAP NPE internal Context Store register
- */
-#define IX_NPEDL_CTXT_REG_ADDR_REGMAP     0x0000001E
-
-/**
- * @def IX_NPEDL_CTXT_REG_ADDR_CINDEX
- * @brief Logical address of CINDEX NPE internal Context Store register
- */
-#define IX_NPEDL_CTXT_REG_ADDR_CINDEX     0x0000001F
-
-
-/*
- * NPE Context Store register reset values
- */
-
-/**
- * @def IX_NPEDL_CTXT_REG_RESET_STEVT
- * @brief Reset value of STEVT NPE internal Context Store register
- *        (STEVT = off, 0x80)
- */
-#define IX_NPEDL_CTXT_REG_RESET_STEVT     0x80
-
-/**
- * @def IX_NPEDL_CTXT_REG_RESET_STARTPC
- * @brief Reset value of STARTPC NPE internal Context Store register
- *        (STARTPC = 0x0000)
- */
-#define IX_NPEDL_CTXT_REG_RESET_STARTPC   0x0000
-
-/**
- * @def IX_NPEDL_CTXT_REG_RESET_REGMAP
- * @brief Reset value of REGMAP NPE internal Context Store register
- *        (REGMAP = d0->p0, d8->p2, d16->p4)
- */
-#define IX_NPEDL_CTXT_REG_RESET_REGMAP    0x0820
-
-/**
- * @def IX_NPEDL_CTXT_REG_RESET_CINDEX
- * @brief Reset value of CINDEX NPE internal Context Store register
- *        (CINDEX = 0)
- */
-#define IX_NPEDL_CTXT_REG_RESET_CINDEX    0x00
-
-
-/*
- * numeric range of context levels available on an NPE
- */
-
-/**
- * @def IX_NPEDL_CTXT_NUM_MIN
- * @brief Lowest NPE Context number in range
- */
-#define IX_NPEDL_CTXT_NUM_MIN             0
-
-/**
- * @def IX_NPEDL_CTXT_NUM_MAX
- * @brief Highest NPE Context number in range
- */
-#define IX_NPEDL_CTXT_NUM_MAX             15
-
-
-/*
- * Physical NPE internal registers
- */
-
-/**
- * @def IX_NPEDL_TOTAL_NUM_PHYS_REG
- * @brief Number of Physical registers currently supported
- *        Initial NPE implementations will have a 32-word register file.
- *        Later implementations may have a 64-word register file.
- */
-#define IX_NPEDL_TOTAL_NUM_PHYS_REG               32
-
-/**
- * @def IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP
- * @brief LSB-offset of Regmap number in Physical NPE register address, used
- *        for Physical To Logical register address mapping in the NPE
- */
-#define IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP      1
-
-/**
- * @def IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR
- * @brief Mask to extract a logical NPE register address from a physical
- *        register address, used for Physical To Logical address mapping
- */
-#define IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR   0x1
-
-#endif /* IXNPEDLNPEMGRECREGISTERS_P_H */
diff --git a/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h b/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h
deleted file mode 100644
index bb1f4ab..0000000
--- a/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h
+++ /dev/null
@@ -1,381 +0,0 @@
-/**
- * @file IxNpeDlNpeMgrUtils_p.h
- *
- * @author Intel Corporation
- * @date 18 February 2002
- * @brief This file contains the private API for the NpeMgr module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-
-/**
- * @defgroup IxNpeDlNpeMgrUtils_p IxNpeDlNpeMgrUtils_p
- *
- * @brief The private API for the IxNpeDl NpeMgr Utils module
- * 
- * @{
- */
-
-#ifndef IXNPEDLNPEMGRUTILS_P_H
-#define IXNPEDLNPEMGRUTILS_P_H
-
-
-/*
- * Put the user defined include files required.
- */
-#include "IxNpeDl.h"
-#include "IxOsalTypes.h"
-#include "IxNpeDlNpeMgrEcRegisters_p.h"
-
-
-/*
- * Function Prototypes
- */
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrInsMemWrite (UINT32 npeBaseAddress,
-                                           UINT32 insMemAddress,
-			                   UINT32 insMemData,
-                                           BOOL verify)
- * 
- * @brief Writes a word to NPE Instruction memory
- *
- * @param UINT32 [in] npeBaseAddress - Base Address of NPE
- * @param UINT32 [in] insMemAddress  - NPE instruction memory address to write
- * @param UINT32 [in] insMemData     - data to write to instruction memory
- * @param BOOL   [in] verify         - if true, verify the memory location is
- *                                     written successfully.
- * 
- * This function is used to write a single word of data to a location in NPE 
- * instruction memory.  If the <i>verify</i> option is ON, NpeDl will read back
- * from the memory location to verify that it was written successfully
- * 
- * @pre
- *
- * @post
- *
- * @return
- *    - IX_FAIL if verify is true and the memory location was not written
- *      successfully
- *    - IX_SUCCESS otherwise
- */ 
-IX_STATUS
-ixNpeDlNpeMgrInsMemWrite (UINT32 npeBaseAddress, UINT32 insMemAddress,
-			  UINT32 insMemData, BOOL verify);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrDataMemWrite (UINT32 npeBaseAddress,
-                                            UINT32 dataMemAddress,
-	                                    UINT32 dataMemData,
-                                            BOOL verify)
- * 
- * @brief Writes a word to NPE Data memory
- *
- * @param UINT32 [in] npeBaseAddress - Base Address of NPE
- * @param UINT32 [in] dataMemAddress - NPE data memory address to write
- * @param UINT32 [in] dataMemData    - data to write to NPE data memory
- * @param BOOL   [in] verify         - if true, verify the memory location is
- *                                     written successfully.
- * 
- * This function is used to write a single word of data to a location in NPE 
- * data memory.  If the <i>verify</i> option is ON, NpeDl will read back from
- * the memory location to verify that it was written successfully
- * 
- * @pre
- *
- * @post
- *
- * @return
- *    - IX_FAIL if verify is true and the memory location was not written
- *      successfully
- *    - IX_SUCCESS otherwise
- */ 
-IX_STATUS
-ixNpeDlNpeMgrDataMemWrite (UINT32 npeBaseAddress, UINT32 dataMemAddress,
-			   UINT32 dataMemData, BOOL verify);
-
-
-/**
- * @fn void ixNpeDlNpeMgrExecAccRegWrite (UINT32 npeBaseAddress,
-                                          UINT32 regAddress,
-                                          UINT32 regData)
- * 
- * @brief Writes a word to an NPE Execution Access register
- *
- * @param UINT32 [in] npeBaseAddress - Base Address of NPE
- * @param UINT32 [in] regAddress     - NPE Execution Access register address
- * @param UINT32 [in] regData        - data to write to register
- * 
- * This function is used to write a single word of data to an NPE Execution
- * Access register.
- * 
- * @pre
- *
- * @post
- *
- * @return none
- */ 
-void
-ixNpeDlNpeMgrExecAccRegWrite (UINT32 npeBaseAddress, UINT32 regAddress,
-			      UINT32 regData);
-
-
-/**
- * @fn UINT32 ixNpeDlNpeMgrExecAccRegRead (UINT32 npeBaseAddress,
-                                           UINT32 regAddress)
- * 
- * @brief Reads the contents of an NPE Execution Access register
- *
- * @param UINT32 [in] npeBaseAddress - Base Address of NPE
- * @param UINT32 [in] regAddress     - NPE Execution Access register address
- * 
- * This function is used to read the contents of an NPE Execution
- * Access register.
- * 
- * @pre
- *
- * @post
- *
- * @return The value read from the Execution Access register
- */ 
-UINT32
-ixNpeDlNpeMgrExecAccRegRead (UINT32 npeBaseAddress, UINT32 regAddress);
-
-
-/**
- * @fn void ixNpeDlNpeMgrCommandIssue (UINT32 npeBaseAddress,
-                                       UINT32 command)
- * 
- * @brief Issues an NPE Execution Control command
- *
- * @param UINT32 [in] npeBaseAddress - Base Address of NPE
- * @param UINT32 [in] command        - Command to issue
- * 
- * This function is used to issue a stand-alone NPE Execution Control command
- * (e.g. command to Stop NPE execution)
- * 
- * @pre
- *
- * @post
- *
- * @return none
- */ 
-void
-ixNpeDlNpeMgrCommandIssue (UINT32 npeBaseAddress, UINT32 command);
-
-
-/**
- * @fn void ixNpeDlNpeMgrDebugInstructionPreExec (UINT32 npeBaseAddress)
- * 
- * @brief Prepare to executes one or more NPE instructions in the Debug
- *        Execution Stack level.
- *
- * @param UINT32 [in] npeBaseAddress - Base Address of NPE
- * 
- * This function should be called once before a sequence of calls to 
- * ixNpeDlNpeMgrDebugInstructionExec().
- * 
- * @pre
- *
- * @post
- *     - ixNpeDlNpeMgrDebugInstructionPostExec() should be called to restore
- *       registers values altered by this function
- *
- * @return none
- */ 
-void
-ixNpeDlNpeMgrDebugInstructionPreExec (UINT32 npeBaseAddress);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrDebugInstructionExec (UINT32 npeBaseAddress,
-                                               UINT32 npeInstruction,
-                                               UINT32 ctxtNum,
-                                               UINT32 ldur)
- * 
- * @brief Executes a single instruction on the NPE at the Debug Execution Stack
- *        level
- *
- * @param UINT32 [in] npeBaseAddress - Base Address of NPE
- * @param UINT32 [in] npeInstruction - Value to write to INSTR (Instruction)
- *                                     register
- * @param UINT32 [in] ctxtNum        - context the instruction will be executed
- *                                     in and which context store it may access
- * @param UINT32 [in] ldur           - Long Immediate Duration, set to non-zero
- *                                     to use long-immediate mode instruction
- * 
- * This function is used to execute a single instruction in the NPE pipeline at
- * the debug Execution Context Stack level. It won't disturb the state of other
- * executing contexts.  Its useful for performing NPE operations, such as
- * writing to NPE Context Store registers and physical registers, that cannot
- * be carried out directly using the Configuration Bus registers. This function
- * will return TIMEOUT status if NPE not responding due to NPS is hang / halt.
- * 
- * @pre 
- *     - The NPE should be stopped and in a clean state
- *     - ixNpeDlNpeMgrDebugInstructionPreExec() should be called once before
- *       a sequential of 1 or more calls to this function
- *
- * @post
- *     - ixNpeDlNpeMgrDebugInstructionPostExec() should be called after 
- *       a sequence of calls to this function
- *
- * @return 
- *    - IX_NPEDL_CRITICAL_NPE_ERR if execution of instruction failed / timeout
- *    - IX_SUCCESS otherwise 
- */ 
-IX_STATUS
-ixNpeDlNpeMgrDebugInstructionExec (UINT32 npeBaseAddress,
-				   UINT32 npeInstruction,
-				   UINT32 ctxtNum, UINT32 ldur);
-
-
-/**
- * @fn void ixNpeDlNpeMgrDebugInstructionPostExec (UINT32 npeBaseAddress)
- * 
- * @brief Clean up after executing one or more NPE instructions in the
- *        Debug Stack Level
- *
- * @param UINT32 [in] npeBaseAddress - Base Address of NPE
- * 
- * This function should be called once following a sequence of calls to 
- * ixNpeDlNpeMgrDebugInstructionExec().
- *
- * @pre 
- *    -  ixNpeDlNpeMgrDebugInstructionPreExec() was called earlier
- *
- * @post
- *    -  The Instruction Pipeline will cleared
- *
- * @return none
- */ 
-void
-ixNpeDlNpeMgrDebugInstructionPostExec (UINT32 npeBaseAddress);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrPhysicalRegWrite (UINT32 npeBaseAddress,
-                                                UINT32 regAddr,
-                                                UINT32 regValue,
-					        BOOL verify)
- * 
- * @brief Write one of the 32* 32-bit physical registers in the NPE data 
- *        register file
- *
- * @param UINT32 [in] npeBaseAddress - Base Address of NPE
- * @param UINT32 [in] regAddr        - number of the physical register (0-31)*
- * @param UINT32 [in] regValue       - value to write to the physical register
- * @param BOOL   [in] verify         - if true, verify the register is written
- *                                     successfully.
- * 
- * This function writes a physical register in the NPE data register file.
- * If the <i>verify</i> option is ON, NpeDl will read back the register to 
- * verify that it was written successfully
- * *Note that release 1.0 of this software supports 32 physical
- * registers, but 64 may be supported in future versions.
- * 
- * @pre
- *    - The NPE should be stopped and in a clean state
- *    - ixNpeDlNpeMgrDebugInstructionPreExec() should be called once before
- *      a sequential of 1 or more calls to this function
- *
- * @post
- *    - Contents of REGMAP Context Store register for Context 0 will be altered
- *    - ixNpeDlNpeMgrDebugInstructionPostExec() should be called after 
- *      a sequence of calls to this function
- *
- * @return
- *    - IX_FAIL if verify is true and the Context Register was not written
- *      successfully
- *    - IX_SUCCESS if Context Register was written successfully
- *    - IX_NPEDL_CRITICAL_NPE_ERR if Context Register was not written 
- *      successfully due to timeout error where NPE is not responding
- */
-IX_STATUS
-ixNpeDlNpeMgrPhysicalRegWrite (UINT32 npeBaseAddress, UINT32 regAddr,
-			       UINT32 regValue, BOOL verify);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrCtxtRegWrite (UINT32 npeBaseAddress,
-                                            UINT32 ctxtNum,
-                                            IxNpeDlCtxtRegNum ctxtReg,
-                                            UINT32 ctxtRegVal,
-                                            BOOL verify)
- * 
- * @brief Writes a value to a Context Store register on an NPE
- *
- * @param UINT32 [in] npeBaseAddress     - Base Address of NPE
- * @param UINT32 [in] ctxtNum            - context store to access
- * @param IxNpeDlCtxtRegNum [in] ctxtReg - which Context Store reg to write
- * @param UINT32 [in] ctxtRegVal         - value to write to the Context Store
- *                                         register
- * @param BOOL   [in] verify             - if true, verify the register is
- *                                         written successfully.
- * 
- * This function writes the contents of a Context Store register in the NPE 
- * register file. If the <i>verify</i> option is ON, NpeDl will read back the
- * register to verify that it was written successfully
- * 
- * @pre
- *    - The NPE should be stopped and in a clean state
- *    - ixNpeDlNpeMgrDebugInstructionPreExec() should be called once before
- *      a sequential of 1 or more calls to this function
- *
- * @post
- *    - ixNpeDlNpeMgrDebugInstructionPostExec() should be called after 
- *      a sequence of calls to this function
- *
- * @return
- *    - IX_FAIL if verify is true and the Context Register was not written
- *      successfully
- *    - IX_SUCCESS if Context Register was written successfully
- *    - IX_NPEDL_CRITICAL_NPE_ERR if Context Register was not written 
- *      successfully due to timeout error where NPE is not responding
- */
-IX_STATUS
-ixNpeDlNpeMgrCtxtRegWrite (UINT32 npeBaseAddress, UINT32 ctxtNum,
-			   IxNpeDlCtxtRegNum ctxtReg, UINT32 ctxtRegVal,
-			   BOOL verify);
-
-
-/**
- * @fn void ixNpeDlNpeMgrUtilsStatsShow (void)
- *
- * @brief This function will display the statistics of the IxNpeDl NpeMgrUtils
- *        module
- *
- * @return none
- */
-void
-ixNpeDlNpeMgrUtilsStatsShow (void);
-
-
-/**
- * @fn void ixNpeDlNpeMgrUtilsStatsReset (void)
- *
- * @brief This function will reset the statistics of the IxNpeDl NpeMgrUtils
- *        module
- *
- * @return none
- */
-void
-ixNpeDlNpeMgrUtilsStatsReset (void);
-
-
-#endif  /* IXNPEDLNPEMGRUTILS_P_H */
diff --git a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h
deleted file mode 100644
index 989db2c..0000000
--- a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/**
- * @file IxNpeDlNpeMgr_p.h
- *
- * @author Intel Corporation
- * @date 14 December 2001
- * @brief This file contains the private API for the NpeMgr module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-
-/**
- * @defgroup IxNpeDlNpeMgr_p IxNpeDlNpeMgr_p
- *
- * @brief The private API for the IxNpeDl NpeMgr module
- * 
- * @{
- */
-
-#ifndef IXNPEDLNPEMGR_P_H
-#define IXNPEDLNPEMGR_P_H
-
-
-/*
- * Put the user defined include files required.
- */
-#include "IxNpeDl.h"
-#include "IxOsalTypes.h"
-
-
-/*
- * Function Prototypes
- */
-
-
-/**
- * @fn void ixNpeDlNpeMgrInit (void)
- * 
- * @brief Initialises the NpeMgr module
- *
- * @param none
- * 
- * This function initialises the NpeMgr module.
- * It should be called before any other function in this module is called.
- * It only needs to be called once, but can be called multiple times safely.
- * The code will ASSERT on failure.
- * 
- * @pre
- *     - It must be called before any other function in this module
- *
- * @post
- *     - NPE Configuration Register memory space will be mapped using
- *       IxOsal. This memory will not be unmapped by this module.
- *
- * @return none
- */ 
-void
-ixNpeDlNpeMgrInit (void);
-
-
-/**
- * @fn IX_STATUS ixNpeMhNpeMgrUninit (void)
- *
- * @brief This function will uninitialise the IxNpeDlNpeMgr sub-component.
- *
- * This function will uninitialise the IxNpeDlNpeMgr sub-component.
- * It should only be called once, and only if the IxNpeDlNpeMgr sub-component
- * has already been initialised by calling @ref ixNpeDlNpeMgrInit().
- * No other IxNpeDlNpeMgr sub-component API functions should be called
- * until @ref ixNpeDlNpeMgrInit() is called again.
- * If possible, this function should be called before a soft reboot or unloading
- * a kernel module to perform any clean up operations required for IxNpeMh.
- *
- * @return
- *      - IX_SUCCESS if the operation was successful
- *      - IX_FAIL otherwise
- */
-
-IX_STATUS ixNpeDlNpeMgrUninit (void);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrImageLoad (IxNpeDlNpeId npeId,
-                                           UINT32 *imageCodePtr,
-                                           BOOL verify)
- * 
- * @brief Loads a image of microcode onto an NPE
- *
- * @param IxNpeDlNpeId [in] npeId     - Id of target NPE
- * @param UINT32* [in] imageCodePtr - pointer to image code in image to be
- *                                      downloaded
- * @param BOOL [in] verify            - if true, verify each word written to
- *                                      NPE memory.
- * 
- * This function loads a image containing blocks of microcode onto a
- * particular NPE. If the <i>verify</i> option is ON, NpeDl will read back each
- * word written and verify that it was written successfully
- * 
- * @pre
- *     - The NPE should be stopped beforehand
- *
- * @post
- *     - The NPE Instruction Pipeline may be flushed clean
- *
- * @return
- *     - IX_SUCCESS if the download was successful
- *     - IX_FAIL if the download failed
- *     - IX_NPEDL_CRITICAL_NPE_ERR if the download failed due to timeout error 
- *       where NPE is not responding
- */ 
-IX_STATUS
-ixNpeDlNpeMgrImageLoad (IxNpeDlNpeId npeId, UINT32 *imageCodePtr,
-			  BOOL verify);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrNpeReset (IxNpeDlNpeId npeId)
- * 
- * @brief sets a NPE to RESET state
- *
- * @param IxNpeDlNpeId [in] npeId - id of target NPE
- * 
- * This function performs a soft NPE reset by writing reset values to the
- * Configuration Bus Execution Control registers, the Execution Context Stack
- * registers, the Physical Register file, and the Context Store registers for 
- * each context number. It also clears inFIFO, outFIFO and Watchpoint FIFO.
- * It does not reset NPE Co-processors.
- * 
- * @pre
- *     - The NPE should be stopped beforehand
- *
- * @post
- *     - NPE NextProgram Counter (NextPC) will be set to a fixed initial value,
- *       such as 0.  This should be explicitly set by downloading State
- *       Information before starting NPE Execution.
- *     - The NPE Instruction Pipeline will be in a clean state.
- *
- * @return
- *     - IX_SUCCESS if the operation was successful
- *     - IX_FAIL if the operation failed
- *     - IX_NPEDL_CRITICAL_NPE_ERR if the operation failed due to NPE hang
- */ 
-IX_STATUS
-ixNpeDlNpeMgrNpeReset (IxNpeDlNpeId npeId);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrNpeStart (IxNpeDlNpeId npeId)
- * 
- * @brief Starts NPE Execution
- *
- * @param IxNpeDlNpeId [in] npeId - Id of target NPE
- * 
- * Ensures only background Execution Stack Level is Active, clears instruction
- * pipeline, and starts Execution on a NPE by sending a Start NPE command to
- * the NPE. Checks the execution status of the NPE to verify that it is
- * running.
- * 
- * @pre
- *     - The NPE should be stopped beforehand.
- *     - Note that this function does not set the NPE Next Program Counter 
- *       (NextPC), so it should be set beforehand if required by downloading 
- *       appropriate State Information.
- *
- * @post
- *
- * @return
- *     - IX_SUCCESS if the operation was successful
- *     - IX_FAIL otherwise
- */ 
-IX_STATUS
-ixNpeDlNpeMgrNpeStart (IxNpeDlNpeId npeId);
-
-
-/**
- * @fn IX_STATUS ixNpeDlNpeMgrNpeStop (IxNpeDlNpeId npeId)
- * 
- * @brief Halts NPE Execution
- *
- * @param IxNpeDlNpeId [in] npeId - id of target NPE
- * 
- * Stops execution on an NPE by sending a Stop NPE command to the NPE.
- * Checks the execution status of the NPE to verify that it has stopped.
- *
- * @pre
- *
- * @post
- *
- * @return 
- *     - IX_SUCCESS if the operation was successful
- *     - IX_FAIL otherwise
- */ 
-IX_STATUS
-ixNpeDlNpeMgrNpeStop (IxNpeDlNpeId npeId);
-
-
-/**
- * @fn void ixNpeDlNpeMgrStatsShow (void)
- *
- * @brief This function will display statistics of the IxNpeDl NpeMgr module
- *
- * @return none
- */
-void
-ixNpeDlNpeMgrStatsShow (void);
-
-
-/**
- * @fn void ixNpeDlNpeMgrStatsReset (void)
- *
- * @brief This function will reset the statistics of the IxNpeDl NpeMgr module
- *
- * @return none
- */
-void
-ixNpeDlNpeMgrStatsReset (void);
-
-
-#endif /* IXNPEDLIMAGEMGR_P_H */
-
-/**
- * @} defgroup IxNpeDlNpeMgr_p
- */
diff --git a/drivers/net/npe/include/IxNpeMh.h b/drivers/net/npe/include/IxNpeMh.h
deleted file mode 100644
index 3a2bf9f..0000000
--- a/drivers/net/npe/include/IxNpeMh.h
+++ /dev/null
@@ -1,473 +0,0 @@
-/**
- * @file IxNpeMh.h
- *
- * @date 14 Dec 2001
- *
- * @brief This file contains the public API for the IXP400 NPE Message
- * Handler component.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxNpeMh IXP400 NPE Message Handler (IxNpeMh) API
- *
- * @brief The public API for the IXP400 NPE Message Handler component.
- * 
- * @{
- */
-
-#ifndef IXNPEMH_H
-#define IXNPEMH_H
-
-#include "IxOsalTypes.h"
-
-/*
- * #defines for function return types, etc.
- */
-
-#define IX_NPEMH_MIN_MESSAGE_ID (0x00) /**< minimum valid message ID */
-#define IX_NPEMH_MAX_MESSAGE_ID (0xFF) /**< maximum valid message ID */
-
-#define IX_NPEMH_SEND_RETRIES_DEFAULT (3) /**< default msg send retries */
-
-
-/**
- * @def IX_NPEMH_CRITICAL_NPE_ERR
- *
- * @brief NpeMH function return value for a Critical NPE error occuring during
-          sending/receiving message. Assume NPE hang / halt if this value is
-          returned.
- */
-#define IX_NPEMH_CRITICAL_NPE_ERR        2
-
-/**
- * @enum IxNpeMhNpeId
- *
- * @brief The ID of a particular NPE.
- * @note In this context, for IXP425 Silicon (B0):<br> 
- *      - NPE-A has HDLC, HSS, AAL and UTOPIA Coprocessors.<br> 
- *      - NPE-B has Ethernet Coprocessor.<br>
- *      - NPE-C has Ethernet, AES, DES and HASH Coprocessors.<br>
- *      - IXP400 Product Line have different combinations of coprocessors. 
- */
-
-typedef enum
-{
-    IX_NPEMH_NPEID_NPEA = 0, /**< ID for NPE-A */
-    IX_NPEMH_NPEID_NPEB,     /**< ID for NPE-B */
-    IX_NPEMH_NPEID_NPEC,     /**< ID for NPE-C */
-    IX_NPEMH_NUM_NPES        /**< Number of NPEs */
-} IxNpeMhNpeId;
-
-/**
- * @enum IxNpeMhNpeInterrupts
- *
- * @brief Indicator specifying whether or not NPE interrupts should drive
- * receiving of messages from the NPEs.
- */
-
-typedef enum
-{
-    IX_NPEMH_NPEINTERRUPTS_NO = 0, /**< Don't use NPE interrupts */
-    IX_NPEMH_NPEINTERRUPTS_YES     /**< Do use NPE interrupts */
-} IxNpeMhNpeInterrupts;
-
-/**
- * @brief The 2-word message structure to send to and receive from the
- * NPEs.
- */
-
-typedef struct
-{
-    UINT32 data[2]; /**< the actual data of the message */
-} IxNpeMhMessage;
-
-/** message ID */
-typedef UINT32 IxNpeMhMessageId;
-
-/**
- * @typedef IxNpeMhCallback
- *
- * @brief This prototype shows the format of a message callback function.
- *
- * This prototype shows the format of a message callback function.  The
- * message callback will be passed the message to be handled and will also
- * be told from which NPE the message was received.  The message callback
- * will either be registered by ixNpeMhUnsolicitedCallbackRegister() or
- * passed as a parameter to ixNpeMhMessageWithResponseSend().  It will be
- * called from within an ISR triggered by the NPE's "outFIFO not empty"
- * interrupt (see ixNpeMhInitialize()).  The parameters passed are the ID
- * of the NPE that the message was received from, and the message to be
- * handled.<P><B>Re-entrancy:</B> This function is only a prototype, and
- * will be implemented by the client.  It does not need to be re-entrant.
- */
-
-typedef void (*IxNpeMhCallback) (IxNpeMhNpeId, IxNpeMhMessage);
-
-/*
- * Prototypes for interface functions.
- */
-
-/**
- * @ingroup IxNpeMh
- *
- * @fn IX_STATUS ixNpeMhInitialize (
-           IxNpeMhNpeInterrupts npeInterrupts)
- *
- * @brief This function will initialise the IxNpeMh component.
- *
- * @param npeInterrupts @ref IxNpeMhNpeInterrupts [in] - This parameter
- * dictates whether or not the IxNpeMh component will service NPE "outFIFO
- * not empty" interrupts to trigger receiving and processing of messages
- * from the NPEs.  If not then the client must use ixNpeMhMessagesReceive()
- * to control message receiving and processing.
- *
- * This function will initialise the IxNpeMh component.  It should only be
- * called once, prior to using the IxNpeMh component.  The following
- * actions will be performed by this function:<OL><LI>Initialization of
- * internal data structures (e.g. solicited and unsolicited callback
- * tables).</LI><LI>Configuration of the interface with the NPEs (e.g.
- * enabling of NPE "outFIFO not empty" interrupts).</LI><LI>Registration of
- * ISRs that will receive and handle messages when the NPEs' "outFIFO not
- * empty" interrupts fire (if npeInterrupts equals
- * IX_NPEMH_NPEINTERRUPTS_YES).</LI></OL>
- *
- * @return The function returns a status indicating success or failure.
- */
-
-PUBLIC IX_STATUS ixNpeMhInitialize (
-    IxNpeMhNpeInterrupts npeInterrupts);
-
-/**
- * @ingroup IxNpeMh
- *
- * @fn IX_STATUS ixNpeMhUnload (void)
- *
- * @brief This function will uninitialise the IxNpeMh component.
- *
- * This function will uninitialise the IxNpeMh component.  It should only be
- * called once, and only if the IxNpeMh component has already been initialised.
- * No other IxNpeMh API functions should be called until @ref ixNpeMhInitialize
- * is called again.
- * If possible, this function should be called before a soft reboot or unloading
- * a kernel module to perform any clean up operations required for IxNpeMh.
- *
- * The following actions will be performed by this function:
- * <OL><LI>Unmapping of kernel memory mapped by the function
- * @ref ixNpeMhInitialize.</LI></OL>
- *
- * @return The function returns a status indicating success or failure.
- */
-
-PUBLIC IX_STATUS ixNpeMhUnload (void);
-
-/**
- * @ingroup IxNpeMh
- *
- * @fn IX_STATUS ixNpeMhUnsolicitedCallbackRegister (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessageId messageId,
-           IxNpeMhCallback unsolicitedCallback)
- *
- * @brief This function will register an unsolicited callback for a
- * particular NPE and message ID.
- *
- * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE whose messages
- * the unsolicited callback will handle.
- * @param messageId @ref IxNpeMhMessageId [in] - The ID of the messages the
- * unsolicited callback will handle.
- * @param unsolicitedCallback @ref IxNpeMhCallback [in] - The unsolicited
- * callback function.  A value of NULL will deregister any previously
- * registered callback for this NPE and message ID.
- *
- * This function will register an unsolicited message callback for a
- * particular NPE and message ID.<P>If an unsolicited callback is already
- * registered for the specified NPE and message ID then the callback will
- * be overwritten.  Only one client will be responsible for handling a
- * particular message ID associated with a NPE.  Registering a NULL
- * unsolicited callback will deregister any previously registered
- * callback.<P>The callback function will be called from an ISR that will
- * be triggered by the NPE's "outFIFO not empty" interrupt (see
- * ixNpeMhInitialize()) to handle any unsolicited messages of the specific
- * message ID received from the NPE.  Unsolicited messages will be handled
- * in the order they are received.<P>If no unsolicited callback can be
- * found for a received message then it is assumed that the message is
- * solicited.<P>If more than one client may be interested in a particular
- * unsolicited message then the suggested strategy is to register a
- * callback for the message that can itself distribute the message to
- * multiple clients as necessary.<P>See also
- * ixNpeMhUnsolicitedCallbackForRangeRegister().<P><B>Re-entrancy:</B> This
- * function will be callable from any thread at any time.  IxOsal
- * will be used for any necessary resource protection.
- *
- * @return The function returns a status indicating success or failure.
- */
-
-PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackRegister (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId messageId,
-    IxNpeMhCallback unsolicitedCallback);
-
-/**
- * @ingroup IxNpeMh
- *
- * @fn IX_STATUS ixNpeMhUnsolicitedCallbackForRangeRegister (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessageId minMessageId,
-           IxNpeMhMessageId maxMessageId,
-           IxNpeMhCallback unsolicitedCallback)
- *
- * @brief This function will register an unsolicited callback for a
- * particular NPE and range of message IDs.
- *
- * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE whose messages the
- * unsolicited callback will handle.
- * @param minMessageId @ref IxNpeMhMessageId [in] - The minimum message ID in
- * the range of message IDs the unsolicited callback will handle.
- * @param maxMessageId @ref IxNpeMhMessageId [in] - The maximum message ID in
- * the range of message IDs the unsolicited callback will handle.
- * @param unsolicitedCallback @ref IxNpeMhCallback [in] - The unsolicited
- * callback function.  A value of NULL will deregister any previously
- * registered callback(s) for this NPE and range of message IDs.
- *
- * This function will register an unsolicited callback for a particular NPE
- * and range of message IDs.  It is a convenience function that is
- * effectively the same as calling ixNpeMhUnsolicitedCallbackRegister() for
- * each ID in the specified range.  See
- * ixNpeMhUnsolicitedCallbackRegister() for more
- * information.<P><B>Re-entrancy:</B> This function will be callable from
- * any thread at any time.  IxOsal will be used for any necessary
- * resource protection.
- *
- * @return The function returns a status indicating success or failure.
- */
-
-PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackForRangeRegister (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId minMessageId,
-    IxNpeMhMessageId maxMessageId,
-    IxNpeMhCallback unsolicitedCallback);
-
-/**
- * @ingroup IxNpeMh
- *
- * @fn IX_STATUS ixNpeMhMessageSend (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessage message,
-           UINT32 maxSendRetries)
- *
- * @brief This function will send a message to a particular NPE.
- *
- * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to send the message
- * to.
- * @param message @ref IxNpeMhMessage [in] - The message to send.
- * @param maxSendRetries UINT32 [in] - Max num. of retries to perform
- * if the NPE's inFIFO is full.
- *
- * This function will send a message to a particular NPE.  It will be the
- * client's responsibility to ensure that the message is properly formed.
- * The return status will signify to the client if the message was
- * successfully sent or not.<P>If the message is sent to the NPE then this
- * function will return a status of success.  Note that this will only mean
- * the message has been placed in the NPE's inFIFO.  There will be no way
- * of knowing that the NPE has actually read the message, but once in the
- * incoming message queue it will be safe to assume that the NPE will
- * process it.
- * <P>The inFIFO may fill up sometimes if the Xscale is sending messages
- * faster than the NPE can handle them. This forces us to retry attempts 
- * to send the message until the NPE services the inFIFO. The client should
- * specify a ceiling value for the number of retries suitable to their
- * needs. IX_NPEMH_SEND_RETRIES_DEFAULT can be used as a default value for
- * the <i>maxSendRetries</i> parameter for this function. Each retry
- * exceeding this default number will incur a blocking delay of 1 microsecond,
- * to avoid consuming too much AHB bus bandwidth while performing retries.
- * <P>Note this function <B>must</B> only be used for messages.
- * that do not solicit responses. If the message being sent will solicit a
- * response then the ixNpeMhMessageWithResponseSend() function <B>must</B>
- * be used to ensure that the response is correctly
- * handled. <P> This function will return timeout status if NPE hang / halt 
- * while sending message. The timeout error is not related to the 
- * <i>maxSendRetries</i> as mentioned above. The timeout error will only occur 
- * if the first word of the message has been sent to NPE (not exceeding 
- * <i>maxSendRetries</i> when sending 1st message word), but the second word of
- * the message can't be written to NPE's inFIFO due to NPE hang / halt after 
- * maximum waiting time (IX_NPE_MH_MAX_NUM_OF_RETRIES). 
- * <P><B>Re-entrancy:</B> This function will be callable from any
- * thread at any time.  IxOsal will be used for any necessary
- * resource protection.
- *
- * @return The function returns a status indicating success, failure or timeout.
- */
-
-PUBLIC IX_STATUS ixNpeMhMessageSend (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message,
-    UINT32 maxSendRetries);
-
-/**
- * @ingroup IxNpeMh
- *
- * @fn IX_STATUS ixNpeMhMessageWithResponseSend (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessage message,
-           IxNpeMhMessageId solicitedMessageId,
-           IxNpeMhCallback solicitedCallback,
-           UINT32 maxSendRetries)
- *
- * @brief This function is equivalent to the ixNpeMhMessageSend() function,
- * but must be used when the message being sent will solicited a response.
- *
- * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to send the message
- * to.
- * @param message @ref IxNpeMhMessage [in] - The message to send.
- * @param solicitedMessageId @ref IxNpeMhMessageId [in] - The ID of the
- * solicited response message.
- * @param solicitedCallback @ref IxNpeMhCallback [in] - The function to use to
- * pass the response message back to the client.  A value of NULL will
- * cause the response message to be discarded.
- * @param maxSendRetries UINT32 [in] - Max num. of retries to perform
- * if the NPE's inFIFO is full.
- *
- * This function is equivalent to the ixNpeMhMessageSend() function, but
- * must be used when the message being sent will solicited a
- * response.<P>The client must specify the ID of the solicited response
- * message to allow the response to be recognised when it is received.  The
- * client must also specify a callback function to handle the received
- * response.  The IxNpeMh component will not offer the facility to send a
- * message to a NPE and receive a response within the same context.<P>Note
- * if the client is not interested in the response, specifying a NULL
- * callback will cause the response message to be discarded.<P>The
- * solicited callback will be stored and called some time later from an ISR
- * that will be triggered by the NPE's "outFIFO not empty" interrupt (see
- * ixNpeMhInitialize()) to handle the response message corresponding to the
- * message sent.  Response messages will be handled in the order they are
- * received.<P>
- * <P>The inFIFO may fill up sometimes if the Xscale is sending messages
- * faster than the NPE can handle them. This forces us to retry attempts 
- * to send the message until the NPE services the inFIFO. The client should
- * specify a ceiling value for the number of retries suitable to their
- * needs. IX_NPEMH_SEND_RETRIES_DEFAULT can be used as a default value for
- * the <i>maxSendRetries</i> parameter for this function. Each retry
- * exceeding this default number will incur a blocking delay of 1 microsecond,
- * to avoid consuming too much AHB bus bandwidth while performing retries.
- * <P> This function will return timeout status if NPE hang / halt 
- * while sending message. The timeout error is not related to the 
- * <i>maxSendRetries</i> as mentioned above. The timeout error will only occur 
- * if the first word of the message has been sent to NPE (not exceeding 
- * <i>maxSendRetries</i> when sending 1st message word), but the second word of
- * the message can't be written to NPE's inFIFO due to NPE hang / halt after 
- * maximum waiting time (IX_NPE_MH_MAX_NUM_OF_RETRIES). 
- * <P><B>Re-entrancy:</B> This function will be callable from any
- * thread at any time.  IxOsal will be used for any necessary
- * resource protection.
- *
- * @return The function returns a status indicating success or failure.
- */
-
-PUBLIC IX_STATUS ixNpeMhMessageWithResponseSend (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message,
-    IxNpeMhMessageId solicitedMessageId,
-    IxNpeMhCallback solicitedCallback,
-    UINT32 maxSendRetries);
-
-/**
- * @ingroup IxNpeMh
- *
- * @fn IX_STATUS ixNpeMhMessagesReceive (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will receive messages from a particular NPE and
- * pass each message to the client via a solicited callback (for solicited
- * messages) or an unsolicited callback (for unsolicited messages).
- *
- * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to receive and
- * process messages from.
- *
- * This function will receive messages from a particular NPE and pass each
- * message to the client via a solicited callback (for solicited messages)
- * or an unsolicited callback (for unsolicited messages).<P>If the IxNpeMh
- * component is initialised to service NPE "outFIFO not empty" interrupts
- * (see ixNpeMhInitialize()) then there is no need to call this function.
- * This function is only provided as an alternative mechanism to control
- * the receiving and processing of messages from the NPEs.<P> This function
- * will return timeout status if NPE hang / halt while receiving message. The
- * timeout error will only occur if this function has read the first word of
- * the message and can't read second word of the message from NPE's outFIFO
- * after maximum retries (IX_NPE_MH_MAX_NUM_OF_RETRIES). 
- * <P>Note this function cannot be called from within 
- * an ISR as it will use resource protection mechanisms.<P><B>Re-entrancy:</B> 
- * This function will be callable from any thread at any time.  IxOsal will be 
- * used for any necessary resource protection.
- *
- * @return The function returns a status indicating success, failure or timeout.
- */
-
-PUBLIC IX_STATUS ixNpeMhMessagesReceive (
-    IxNpeMhNpeId npeId);
-
-/**
- * @ingroup IxNpeMh
- *
- * @fn IX_STATUS ixNpeMhShow (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will display the current state of the IxNpeMh
- * component.
- *
- * <B>Re-entrancy:</B> This function will be callable from
- * any thread at any time.  However, no resource protection will be used
- * so as not to impact system performance.  As this function is only
- * reading statistical information then this is acceptable.
- *
- * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to display state
- * information for.
- *
- * @return The function returns a status indicating success or failure.
- */
-
-PUBLIC IX_STATUS ixNpeMhShow (
-    IxNpeMhNpeId npeId);
-
-/**
- * @ingroup IxNpeMh
- *
- * @fn IX_STATUS ixNpeMhShowReset (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will reset the current state of the IxNpeMh
- * component.
- *
- * <B>Re-entrancy:</B> This function will be callable from
- * any thread at any time.  However, no resource protection will be used
- * so as not to impact system performance.  As this function is only
- * writing statistical information then this is acceptable.
- *
- * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to reset state
- * information for.
- *
- * @return The function returns a status indicating success or failure.
- */
-
-PUBLIC IX_STATUS ixNpeMhShowReset (
-    IxNpeMhNpeId npeId);
-
-#endif /* IXNPEMH_H */
-
-/**
- * @} defgroup IxNpeMh
- */
diff --git a/drivers/net/npe/include/IxNpeMhConfig_p.h b/drivers/net/npe/include/IxNpeMhConfig_p.h
deleted file mode 100644
index ca47f7f..0000000
--- a/drivers/net/npe/include/IxNpeMhConfig_p.h
+++ /dev/null
@@ -1,531 +0,0 @@
-/**
- * @file IxNpeMhConfig_p.h
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the private API for the Configuration module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxNpeMhConfig_p IxNpeMhConfig_p
- *
- * @brief The private API for the Configuration module.
- * 
- * @{
- */
-
-#ifndef IXNPEMHCONFIG_P_H
-#define IXNPEMHCONFIG_P_H
-
-#include "IxOsal.h"
-
-#include "IxNpeMh.h"
-#include "IxNpeMhMacros_p.h"
-
-/*
- * inline definition
- */
-/* enable function inlining for performances */
-#ifdef IXNPEMHSOLICITEDCBMGR_C
-/* Non-inline functions will be defined in this translation unit. 
-	 Reason is that in GNU Compiler, if the Optimization is turn off, all extern inline
-	 functions will not be compiled.
-*/
-#		ifndef __wince
-#			ifndef IXNPEMHCONFIG_INLINE
-#				define IXNPEMHCONFIG_INLINE 
-#			endif
-#		else
-#			ifndef IXNPEMHCONFIG_INLINE
-#				define IXNPEMHCONFIG_INLINE IX_OSAL_INLINE_EXTERN
-#			endif
-#		endif /* __wince*/
-
-#else
-
-#		ifndef IXNPEMHCONFIG_INLINE
-#			define IXNPEMHCONFIG_INLINE IX_OSAL_INLINE_EXTERN
-#		endif /* IXNPEMHCONFIG_INLINE */
-#endif /* IXNPEMHSOLICITEDCBMGR_C */
-/*
- * Typedefs and #defines, etc.
- */
- 
-typedef void (*IxNpeMhConfigIsr) (int); /**< ISR function pointer */
-
-/**
- * @struct IxNpeMhConfigNpeInfo
- *
- * @brief This structure is used to maintain the configuration information
- * associated with an NPE.
- */
-
-typedef struct
-{
-    IxOsalMutex mutex;          /**< mutex */
-    UINT32 interruptId;     /**< interrupt ID */
-    UINT32 virtualRegisterBase; /**< register virtual base address */
-    UINT32 statusRegister;      /**< status register virtual address */
-    UINT32 controlRegister;     /**< control register virtual address */
-    UINT32 inFifoRegister;      /**< inFIFO register virutal address */
-    UINT32 outFifoRegister;     /**< outFIFO register virtual address */
-    IxNpeMhConfigIsr isr;   /**< isr routine for handling interrupt */
-    BOOL oldInterruptState; /**< old interrupt state (true => enabled) */
-} IxNpeMhConfigNpeInfo;
-
-
-/*
- * #defines for function return types, etc.
- */
-
-/**< NPE register base address */
-#define IX_NPEMH_NPE_BASE (IX_OSAL_IXP400_PERIPHERAL_PHYS_BASE)
-
-#define IX_NPEMH_NPEA_OFFSET (0x6000) /**< NPE-A register base offset */
-#define IX_NPEMH_NPEB_OFFSET (0x7000) /**< NPE-B register base offset */
-#define IX_NPEMH_NPEC_OFFSET (0x8000) /**< NPE-C register base offset */
-
-#define IX_NPEMH_NPESTAT_OFFSET (0x002C) /**< NPE status register offset */
-#define IX_NPEMH_NPECTL_OFFSET  (0x0030) /**< NPE control register offset */
-#define IX_NPEMH_NPEFIFO_OFFSET (0x0038) /**< NPE FIFO register offset */
-
-/** NPE-A register base address */
-#define IX_NPEMH_NPEA_BASE (IX_NPEMH_NPE_BASE + IX_NPEMH_NPEA_OFFSET)
-/** NPE-B register base address */
-#define IX_NPEMH_NPEB_BASE (IX_NPEMH_NPE_BASE + IX_NPEMH_NPEB_OFFSET)
-/** NPE-C register base address */
-#define IX_NPEMH_NPEC_BASE (IX_NPEMH_NPE_BASE + IX_NPEMH_NPEC_OFFSET)
-
-/* NPE-A configuration */
-
-/** NPE-A interrupt */
-#define IX_NPEMH_NPEA_INT  (IX_OSAL_IXP400_NPEA_IRQ_LVL)
-/** NPE-A FIFO register */
-#define IX_NPEMH_NPEA_FIFO (IX_NPEMH_NPEA_BASE + IX_NPEMH_NPEFIFO_OFFSET)
-/** NPE-A control register */
-#define IX_NPEMH_NPEA_CTL  (IX_NPEMH_NPEA_BASE + IX_NPEMH_NPECTL_OFFSET)
-/** NPE-A status register */
-#define IX_NPEMH_NPEA_STAT (IX_NPEMH_NPEA_BASE + IX_NPEMH_NPESTAT_OFFSET)
-
-/* NPE-B configuration */
-
-/** NPE-B interrupt */
-#define IX_NPEMH_NPEB_INT  (IX_OSAL_IXP400_NPEB_IRQ_LVL)
-/** NPE-B FIFO register */
-#define IX_NPEMH_NPEB_FIFO (IX_NPEMH_NPEB_BASE + IX_NPEMH_NPEFIFO_OFFSET)
-/** NPE-B control register */
-#define IX_NPEMH_NPEB_CTL  (IX_NPEMH_NPEB_BASE + IX_NPEMH_NPECTL_OFFSET)
-/** NPE-B status register */
-#define IX_NPEMH_NPEB_STAT (IX_NPEMH_NPEB_BASE + IX_NPEMH_NPESTAT_OFFSET)
-
-/* NPE-C configuration */
-
-/** NPE-C interrupt */
-#define IX_NPEMH_NPEC_INT  (IX_OSAL_IXP400_NPEC_IRQ_LVL)
-/** NPE-C FIFO register */
-#define IX_NPEMH_NPEC_FIFO (IX_NPEMH_NPEC_BASE + IX_NPEMH_NPEFIFO_OFFSET)
-/** NPE-C control register */
-#define IX_NPEMH_NPEC_CTL  (IX_NPEMH_NPEC_BASE + IX_NPEMH_NPECTL_OFFSET)
-/** NPE-C status register */
-#define IX_NPEMH_NPEC_STAT (IX_NPEMH_NPEC_BASE + IX_NPEMH_NPESTAT_OFFSET)
-
-/* NPE control register bit definitions */
-#define IX_NPEMH_NPE_CTL_OFE   (1 << 16) /**< OutFifoEnable */
-#define IX_NPEMH_NPE_CTL_IFE   (1 << 17) /**< InFifoEnable */
-#define IX_NPEMH_NPE_CTL_OFEWE (1 << 24) /**< OutFifoEnableWriteEnable */
-#define IX_NPEMH_NPE_CTL_IFEWE (1 << 25) /**< InFifoEnableWriteEnable */
-
-/* NPE status register bit definitions */
-#define IX_NPEMH_NPE_STAT_OFNE  (1 << 16) /**< OutFifoNotEmpty */
-#define IX_NPEMH_NPE_STAT_IFNF  (1 << 17) /**< InFifoNotFull */
-#define IX_NPEMH_NPE_STAT_OFNF  (1 << 18) /**< OutFifoNotFull */
-#define IX_NPEMH_NPE_STAT_IFNE  (1 << 19) /**< InFifoNotEmpty */
-#define IX_NPEMH_NPE_STAT_MBINT (1 << 20) /**< Mailbox interrupt */
-#define IX_NPEMH_NPE_STAT_IFINT (1 << 21) /**< InFifo interrupt */
-#define IX_NPEMH_NPE_STAT_OFINT (1 << 22) /**< OutFifo interrupt */
-#define IX_NPEMH_NPE_STAT_WFINT (1 << 23) /**< WatchFifo interrupt */
-
-
-/**
- * Variable declarations.  Externs are followed by static variables.
- */
-extern IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES];
-
-
-/*
- * Prototypes for interface functions.
- */
-
-/**
- * @fn void ixNpeMhConfigInitialize (
-           IxNpeMhNpeInterrupts npeInterrupts)
- *
- * @brief This function initialises the Configuration module.
- *
- * @param IxNpeMhNpeInterrupts npeInterrupts (in) - whether or not to
- * service the NPE "outFIFO not empty" interrupts.
- *
- * @return No return value.
- */
-
-void ixNpeMhConfigInitialize (
-    IxNpeMhNpeInterrupts npeInterrupts);
-
-/**
- * @fn void ixNpeMhConfigUninit (void)
- *
- * @brief This function uninitialises the Configuration module.
- *
- * @return No return value.
- */
-
-void ixNpeMhConfigUninit (void);
-
-/**
- * @fn void ixNpeMhConfigIsrRegister (
-           IxNpeMhNpeId npeId,
-           IxNpeMhConfigIsr isr)
- *
- * @brief This function registers an ISR to handle NPE "outFIFO not
- * empty" interrupts.
- *
- * @param IxNpeMhNpeId npeId (in) - the ID of the NPE whose interrupt will
- * be handled.
- * @param IxNpeMhConfigIsr isr (in) - the ISR function pointer that the
- * interrupt will trigger.
- *
- * @return No return value.
- */
-
-void ixNpeMhConfigIsrRegister (
-    IxNpeMhNpeId npeId,
-    IxNpeMhConfigIsr isr);
-
-/**
- * @fn BOOL ixNpeMhConfigNpeInterruptEnable (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function enables a NPE's "outFIFO not empty" interrupt.
- *
- * @param IxNpeMhNpeId npeId (in) - the ID of the NPE whose interrupt will
- * be enabled.
- *
- * @return Returns the previous state of the interrupt (true => enabled).
- */
-
-BOOL ixNpeMhConfigNpeInterruptEnable (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn BOOL ixNpeMhConfigNpeInterruptDisable (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function disables a NPE's "outFIFO not empty" interrupt
- *
- * @param IxNpeMhNpeId npeId (in) - the ID of the NPE whose interrupt will
- * be disabled.
- *
- * @return Returns the previous state of the interrupt (true => enabled).
- */
-
-BOOL ixNpeMhConfigNpeInterruptDisable (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn IxNpeMhMessageId ixNpeMhConfigMessageIdGet (
-           IxNpeMhMessage message)
- *
- * @brief This function gets the ID of a message.
- *
- * @param IxNpeMhMessage message (in) - the message to get the ID of.
- *
- * @return the ID of the message
- */
-
-IxNpeMhMessageId ixNpeMhConfigMessageIdGet (
-    IxNpeMhMessage message);
-
-/**
- * @fn BOOL ixNpeMhConfigNpeIdIsValid (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function checks to see if a NPE ID is valid.
- *
- * @param IxNpeMhNpeId npeId (in) - the NPE ID to validate.
- *
- * @return true if the NPE ID is valid, otherwise false.
- */
-
-BOOL ixNpeMhConfigNpeIdIsValid (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn void ixNpeMhConfigLockGet (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function gets a lock for exclusive NPE interaction, and
- * disables the NPE's "outFIFO not empty" interrupt.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which to get the
- * lock and disable its interrupt.
- *
- * @return No return value.
- */
-
-void ixNpeMhConfigLockGet (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn void ixNpeMhConfigLockRelease (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function releases a lock for exclusive NPE interaction, and
- * enables the NPE's "outFIFO not empty" interrupt.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which to release
- * the lock and enable its interrupt.
- *
- * @return No return value.
- */
-
-void ixNpeMhConfigLockRelease (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn BOOL ixNpeMhConfigInFifoIsEmpty (
-           IxNpeMhNpeId npeId)
- *
- * @brief This inline function checks if a NPE's inFIFO is empty.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the inFIFO
- * will be checked.
- *
- * @return true if the inFIFO is empty, otherwise false.
- */
-
-IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigInFifoIsEmpty (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn BOOL ixNpeMhConfigInFifoIsFull (
-           IxNpeMhNpeId npeId)
- *
- * @brief This inline function checks if a NPE's inFIFO is full.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the inFIFO
- * will be checked.
- *
- * @return true if the inFIFO is full, otherwise false.
- */
-
-IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigInFifoIsFull (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn BOOL ixNpeMhConfigOutFifoIsEmpty (
-           IxNpeMhNpeId npeId)
- *
- * @brief This inline function checks if a NPE's outFIFO is empty.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the outFIFO
- * will be checked.
- *
- * @return true if the outFIFO is empty, otherwise false.
- */
-
-IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigOutFifoIsEmpty (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn BOOL ixNpeMhConfigOutFifoIsFull (
-           IxNpeMhNpeId npeId)
- *
- * @brief This inline function checks if a NPE's outFIFO is full.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the outFIFO
- * will be checked.
- *
- * @return true if the outFIFO is full, otherwise false.
- */
-
-IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigOutFifoIsFull (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn IX_STATUS ixNpeMhConfigInFifoWrite (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessage message)
- *
- * @brief This function writes a message to a NPE's inFIFO.  The caller
- * must first check that the NPE's inFifo is not full. After writing the first 
- * word of the message, this function will keep polling NPE's inFIFO is not
- * full to write the second word. If inFIFO is not available after maximum 
- * retries (IX_NPE_MH_MAX_NUM_OF_RETRIES), this function will return TIMEOUT 
- * status to indicate NPE hang / halt.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the inFIFO
- * will be written to.
- * @param IxNpeMhMessage message (in) - The message to write.
- *
- * @return The function returns a status indicating success, failure or timeout.
- */
-
-IX_STATUS ixNpeMhConfigInFifoWrite (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message);
-
-/**
- * @fn IX_STATUS ixNpeMhConfigOutFifoRead (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessage *message)
- *
- * @brief This function reads a message from a NPE's outFIFO.  The caller
- * must first check that the NPE's outFifo is not empty. After reading the first 
- * word of the message, this function will keep polling NPE's outFIFO is not
- * empty to read the second word. If outFIFO is empty after maximum 
- * retries (IX_NPE_MH_MAX_NUM_OF_RETRIES), this function will return TIMEOUT 
- * status to indicate NPE hang / halt.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the outFIFO
- * will be read from.
- * @param IxNpeMhMessage message (out) - The message read.
- *
- * @return The function returns a status indicating success, failure or timeout.
- */
-
-IX_STATUS ixNpeMhConfigOutFifoRead (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage *message);
-
-/**
- * @fn void ixNpeMhConfigShow (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will display the current state of the Configuration
- * module.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to display state
- * information for.
- *
- * @return No return value.
- */
-
-void ixNpeMhConfigShow (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn void ixNpeMhConfigShowReset (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will reset the current state of the Configuration
- * module.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to reset state
- * information for.
- *
- * @return No return value.
- */
-
-void ixNpeMhConfigShowReset (
-    IxNpeMhNpeId npeId);
-
-/*
- * Inline functions
- */
- 
-/*
- * This inline function checks if a NPE's inFIFO is empty.
- */
-
-IXNPEMHCONFIG_INLINE
-BOOL ixNpeMhConfigInFifoIsEmpty (
-    IxNpeMhNpeId npeId)
-{
-    UINT32 ifne;
-    volatile UINT32 *statusReg =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister;
-
-    /* get the IFNE (InFifoNotEmpty) bit of the status register */
-    IX_NPEMH_REGISTER_READ_BITS (statusReg, &ifne, IX_NPEMH_NPE_STAT_IFNE);
-
-    /* if the IFNE status bit is unset then the inFIFO is empty */
-    return (ifne == 0);
-}
-
-
-/*
- * This inline function checks if a NPE's inFIFO is full.
- */
-IXNPEMHCONFIG_INLINE
-BOOL ixNpeMhConfigInFifoIsFull (
-    IxNpeMhNpeId npeId)
-{
-    UINT32 ifnf;
-    volatile UINT32 *statusReg =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister;
-
-    /* get the IFNF (InFifoNotFull) bit of the status register */
-    IX_NPEMH_REGISTER_READ_BITS (statusReg, &ifnf, IX_NPEMH_NPE_STAT_IFNF);
-
-    /* if the IFNF status bit is unset then the inFIFO is full */
-    return (ifnf == 0);
-}
-
-
-/*
- * This inline function checks if a NPE's outFIFO is empty.
- */
-IXNPEMHCONFIG_INLINE
-BOOL ixNpeMhConfigOutFifoIsEmpty (
-    IxNpeMhNpeId npeId)
-{
-    UINT32 ofne;
-    volatile UINT32 *statusReg =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister;
-
-    /* get the OFNE (OutFifoNotEmpty) bit of the status register */
-    IX_NPEMH_REGISTER_READ_BITS (statusReg, &ofne, IX_NPEMH_NPE_STAT_OFNE);
-
-    /* if the OFNE status bit is unset then the outFIFO is empty */
-    return (ofne == 0);
-}
-
-/*
- * This inline function checks if a NPE's outFIFO is full.
- */
-IXNPEMHCONFIG_INLINE
-BOOL ixNpeMhConfigOutFifoIsFull (
-    IxNpeMhNpeId npeId)
-{
-    UINT32 ofnf;
-    volatile UINT32 *statusReg =
-        (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister;
-
-    /* get the OFNF (OutFifoNotFull) bit of the status register */
-    IX_NPEMH_REGISTER_READ_BITS (statusReg, &ofnf, IX_NPEMH_NPE_STAT_OFNF);
-
-    /* if the OFNF status bit is unset then the outFIFO is full */
-    return (ofnf == 0);
-}
-
-#endif /* IXNPEMHCONFIG_P_H */
-
-/**
- * @} defgroup IxNpeMhConfig_p
- */
diff --git a/drivers/net/npe/include/IxNpeMhMacros_p.h b/drivers/net/npe/include/IxNpeMhMacros_p.h
deleted file mode 100644
index 51ee9e2..0000000
--- a/drivers/net/npe/include/IxNpeMhMacros_p.h
+++ /dev/null
@@ -1,272 +0,0 @@
-/**
- * @file IxNpeMhMacros_p.h
- *
- * @author Intel Corporation
- * @date 21 Jan 2002
- *
- * @brief This file contains the macros for the IxNpeMh component.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxNpeMhMacros_p IxNpeMhMacros_p
- *
- * @brief Macros for the IxNpeMh component.
- * 
- * @{
- */
-
-#ifndef IXNPEMHMACROS_P_H
-#define IXNPEMHMACROS_P_H
-
-/* if we are running as a unit test */
-#ifdef IX_UNIT_TEST
-#undef NDEBUG
-#endif /* #ifdef IX_UNIT_TEST */
-
-#include "IxOsal.h"
-
-/*
- * #defines for function return types, etc.
- */
-
-#define IX_NPEMH_SHOW_TEXT_WIDTH (40) /**< text width for stats display */
-#define IX_NPEMH_SHOW_STAT_WIDTH (10) /**< stat width for stats display */
-
-/**
- * @def IX_NPEMH_SHOW
- *
- * @brief Macro for displaying a stat preceded by a textual description.
- */
-
-#define IX_NPEMH_SHOW(TEXT, STAT) \
-    ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, \
-               "%-40s: %10d\n", (int) TEXT, (int) STAT, 0, 0, 0, 0)
-
-/*
- * Prototypes for interface functions.
- */
-
-/**
- * @typedef IxNpeMhTraceTypes
- *
- * @brief Enumeration defining IxNpeMh trace levels
- */
-
-typedef enum
-{
-    IX_NPEMH_TRACE_OFF     = IX_OSAL_LOG_LVL_NONE,    /**< no trace */
-    IX_NPEMH_WARNING       = IX_OSAL_LOG_LVL_WARNING, /**< warning */
-    IX_NPEMH_DEBUG         = IX_OSAL_LOG_LVL_MESSAGE, /**< debug */
-    IX_NPEMH_FN_ENTRY_EXIT = IX_OSAL_LOG_LVL_DEBUG3   /**< function entry/exit */
-} IxNpeMhTraceTypes;
-
-#ifdef IX_UNIT_TEST
-#define IX_NPEMH_TRACE_LEVEL (IX_NPEMH_FN_ENTRY_EXIT) /**< trace level */
-#else
-#define IX_NPEMH_TRACE_LEVEL (IX_NPEMH_TRACE_OFF) /**< trace level */
-#endif
-
-/**
- * @def IX_NPEMH_TRACE0
- *
- * @brief Trace macro taking 0 arguments.
- */
-
-#define IX_NPEMH_TRACE0(LEVEL, STR) \
-    IX_NPEMH_TRACE6(LEVEL, STR, 0, 0, 0, 0, 0, 0)
-
-/**
- * @def IX_NPEMH_TRACE1
- *
- * @brief Trace macro taking 1 argument.
- */
-
-#define IX_NPEMH_TRACE1(LEVEL, STR, ARG1) \
-    IX_NPEMH_TRACE6(LEVEL, STR, ARG1, 0, 0, 0, 0, 0)
-
-/**
- * @def IX_NPEMH_TRACE2
- *
- * @brief Trace macro taking 2 arguments.
- */
-
-#define IX_NPEMH_TRACE2(LEVEL, STR, ARG1, ARG2) \
-    IX_NPEMH_TRACE6(LEVEL, STR, ARG1, ARG2, 0, 0, 0, 0)
-
-/**
- * @def IX_NPEMH_TRACE3
- *
- * @brief Trace macro taking 3 arguments.
- */
-
-#define IX_NPEMH_TRACE3(LEVEL, STR, ARG1, ARG2, ARG3) \
-    IX_NPEMH_TRACE6(LEVEL, STR, ARG1, ARG2, ARG3, 0, 0, 0)
-
-/**
- * @def IX_NPEMH_TRACE4
- *
- * @brief Trace macro taking 4 arguments.
- */
-
-#define IX_NPEMH_TRACE4(LEVEL, STR, ARG1, ARG2, ARG3, ARG4) \
-    IX_NPEMH_TRACE6(LEVEL, STR, ARG1, ARG2, ARG3, ARG4, 0, 0)
-
-/**
- * @def IX_NPEMH_TRACE5
- *
- * @brief Trace macro taking 5 arguments.
- */
-
-#define IX_NPEMH_TRACE5(LEVEL, STR, ARG1, ARG2, ARG3, ARG4, ARG5) \
-    IX_NPEMH_TRACE6(LEVEL, STR, ARG1, ARG2, ARG3, ARG4, ARG5, 0)
-
-/**
- * @def IX_NPEMH_TRACE6
- *
- * @brief Trace macro taking 6 arguments.
- */
-
-#define IX_NPEMH_TRACE6(LEVEL, STR, ARG1, ARG2, ARG3, ARG4, ARG5, ARG6) \
-{ \
-    if (LEVEL <= IX_NPEMH_TRACE_LEVEL) \
-    { \
-        (void) ixOsalLog (LEVEL, IX_OSAL_LOG_DEV_STDOUT, (STR), \
-                          (int)(ARG1), (int)(ARG2), (int)(ARG3), \
-                          (int)(ARG4), (int)(ARG5), (int)(ARG6)); \
-    } \
-}
-
-/**
- * @def IX_NPEMH_ERROR_REPORT
- *
- * @brief Error reporting facility.
- */
-
-#define IX_NPEMH_ERROR_REPORT(STR) \
-{ \
-    (void) ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, \
-		      (STR), 0, 0, 0, 0, 0, 0); \
-}
-
-/* if we are running on XScale, i.e. real environment */
-#if CPU==XSCALE
-
-/**
- * @def IX_NPEMH_REGISTER_READ
- *
- * @brief This macro reads a memory-mapped register.
- */
-
-#define IX_NPEMH_REGISTER_READ(registerAddress, value) \
-{ \
-    *value = IX_OSAL_READ_LONG(registerAddress); \
-}
-
-/**
- * @def IX_NPEMH_REGISTER_READ_BITS
- *
- * @brief This macro partially reads a memory-mapped register.
- */
-
-#define IX_NPEMH_REGISTER_READ_BITS(registerAddress, value, mask) \
-{ \
-    *value = (IX_OSAL_READ_LONG(registerAddress) & mask); \
-}
-
-/**
- * @def IX_NPEMH_REGISTER_WRITE
- *
- * @brief This macro writes a memory-mapped register.
- */
-
-#define IX_NPEMH_REGISTER_WRITE(registerAddress, value) \
-{ \
-    IX_OSAL_WRITE_LONG(registerAddress, value); \
-}
-
-/**
- * @def IX_NPEMH_REGISTER_WRITE_BITS
- *
- * @brief This macro partially writes a memory-mapped register.
- */
-
-#define IX_NPEMH_REGISTER_WRITE_BITS(registerAddress, value, mask) \
-{ \
-    UINT32 orig = IX_OSAL_READ_LONG(registerAddress); \
-    orig &= (~mask); \
-    orig |= (value & mask); \
-    IX_OSAL_WRITE_LONG(registerAddress, orig); \
-}
-
-
-/* if we are running as a unit test */
-#else /* #if CPU==XSCALE */
-
-#include "IxNpeMhTestRegister.h"
-
-/**
- * @def IX_NPEMH_REGISTER_READ
- *
- * @brief This macro reads a memory-mapped register.
- */
-
-#define IX_NPEMH_REGISTER_READ(registerAddress, value) \
-{ \
-    ixNpeMhTestRegisterRead (registerAddress, value); \
-}
-
-/**
- * @def IX_NPEMH_REGISTER_READ_BITS
- *
- * @brief This macro partially reads a memory-mapped register.
- */
-
-#define IX_NPEMH_REGISTER_READ_BITS(registerAddress, value, mask) \
-{ \
-    ixNpeMhTestRegisterReadBits (registerAddress, value, mask); \
-}
-
-/**
- * @def IX_NPEMH_REGISTER_WRITE
- *
- * @brief This macro writes a memory-mapped register.
- */
-
-#define IX_NPEMH_REGISTER_WRITE(registerAddress, value) \
-{ \
-    ixNpeMhTestRegisterWrite (registerAddress, value); \
-}
-
-/**
- * @def IX_NPEMH_REGISTER_WRITE_BITS
- *
- * @brief This macro partially writes a memory-mapped register.
- */
-
-#define IX_NPEMH_REGISTER_WRITE_BITS(registerAddress, value, mask) \
-{ \
-    ixNpeMhTestRegisterWriteBits (registerAddress, value, mask); \
-}
-
-#endif /* #if CPU==XSCALE */
-
-#endif /* IXNPEMHMACROS_P_H */
-
-/**
- * @} defgroup IxNpeMhMacros_p
- */
diff --git a/drivers/net/npe/include/IxNpeMhReceive_p.h b/drivers/net/npe/include/IxNpeMhReceive_p.h
deleted file mode 100644
index 7b2afa0..0000000
--- a/drivers/net/npe/include/IxNpeMhReceive_p.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/**
- * @file IxNpeMhReceive_p.h
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the private API for the Receive module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxNpeMhReceive_p IxNpeMhReceive_p
- *
- * @brief The private API for the Receive module.
- * 
- * @{
- */
-
-#ifndef IXNPEMHRECEIVE_P_H
-#define IXNPEMHRECEIVE_P_H
-
-#include "IxNpeMh.h"
-#include "IxOsalTypes.h"
-
-/*
- * #defines for function return types, etc.
- */
-
-/*
- * Prototypes for interface functions.
- */
-
-/**
- * @fn void ixNpeMhReceiveInitialize (void)
- *
- * @brief This function registers an internal ISR to handle the NPEs'
- * "outFIFO not empty" interrupts and receive messages from the NPEs when
- * they become available.
- *
- * @return No return value.
- */
-
-void ixNpeMhReceiveInitialize (void);
-
-/**
- * @fn IX_STATUS ixNpeMhReceiveMessagesReceive (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function reads messages from a particular NPE's outFIFO
- * until the outFIFO is empty, and for each message looks first for an
- * unsolicited callback, then a solicited callback, to pass the message
- * back to the client.  If no callback can be found the message is
- * discarded and an error reported. This function will return TIMEOUT 
- * status if NPE hang / halt.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to receive
- * messages from.
- *
- * @return The function returns a status indicating success, failure or timeout.
- */
-
-IX_STATUS ixNpeMhReceiveMessagesReceive (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn void ixNpeMhReceiveShow (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will display the current state of the Receive
- * module.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to display state
- * information for.
- *
- * @return No return status.
- */
-
-void ixNpeMhReceiveShow (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn void ixNpeMhReceiveShowReset (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will reset the current state of the Receive
- * module.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to reset state
- * information for.
- *
- * @return No return status.
- */
-
-void ixNpeMhReceiveShowReset (
-    IxNpeMhNpeId npeId);
-
-#endif /* IXNPEMHRECEIVE_P_H */
-
-/**
- * @} defgroup IxNpeMhReceive_p
- */
diff --git a/drivers/net/npe/include/IxNpeMhSend_p.h b/drivers/net/npe/include/IxNpeMhSend_p.h
deleted file mode 100644
index 0f060cc..0000000
--- a/drivers/net/npe/include/IxNpeMhSend_p.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/**
- * @file IxNpeMhSend_p.h
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the private API for the Send module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxNpeMhSend_p IxNpeMhSend_p
- *
- * @brief The private API for the Send module.
- * 
- * @{
- */
-
-#ifndef IXNPEMHSEND_P_H
-#define IXNPEMHSEND_P_H
-
-#include "IxNpeMh.h"
-#include "IxOsalTypes.h"
-
-/*
- * #defines for function return types, etc.
- */
-
-/*
- * Prototypes for interface functions.
- */
-
-/**
- * @fn IX_STATUS ixNpeMhSendMessageSend (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessage message,
-           UINT32 maxSendRetries)
- *
- * @brief This function writes a message to the specified NPE's inFIFO,
- * and must be used when the message being sent does not solicit a response
- * from the NPE. This function will return TIMEOUT status if NPE hang / halt.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to send the message
- * to.
- * @param IxNpeMhMessage message (in) - The message to send.
- * @param UINT32 maxSendRetries (in) - Max num. of retries to perform
- * if the NPE's inFIFO is full.
- *
- * @return The function returns a status indicating success, failure or timeout.
- */
-
-IX_STATUS ixNpeMhSendMessageSend (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message,
-    UINT32 maxSendRetries);
-
-/**
- * @fn IX_STATUS ixNpeMhSendMessageWithResponseSend (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessage message,
-           IxNpeMhMessageId solicitedMessageId,
-           IxNpeMhCallback solicitedCallback,
-           UINT32 maxSendRetries)
- *
- * @brief This function writes a message to the specified NPE's inFIFO,
- * and must be used when the message being sent solicits a response from
- * the NPE.  The ID of the solicited response must be specified so that it
- * can be recognised, and a callback provided to pass the response back to
- * the client. This function will return TIMEOUT status if NPE hang / halt.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to send the message
- * to.
- * @param IxNpeMhMessage message (in) - The message to send.
- * @param IxNpeMhMessageId solicitedMessageId (in) - The ID of the
- * solicited response.
- * @param IxNpeMhCallback solicitedCallback (in) - The callback to pass the
- * solicited response back to the client.
- * @param UINT32 maxSendRetries (in) - Max num. of retries to perform
- * if the NPE's inFIFO is full.
- *
- * @return The function returns a status indicating success, failure or timeout.
- */
-
-IX_STATUS ixNpeMhSendMessageWithResponseSend (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessage message,
-    IxNpeMhMessageId solicitedMessageId,
-    IxNpeMhCallback solicitedCallback,
-    UINT32 maxSendRetries);
-
-/**
- * @fn void ixNpeMhSendShow (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will display the current state of the Send module.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to display state
- * information for.
- *
- * @return No return value.
- */
-
-void ixNpeMhSendShow (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn void ixNpeMhSendShowReset (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will reset the current state of the Send module.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to reset state
- * information for.
- *
- * @return No return value.
- */
-
-void ixNpeMhSendShowReset (
-    IxNpeMhNpeId npeId);
-
-#endif /* IXNPEMHSEND_P_H */
-
-/**
- * @} defgroup IxNpeMhSend_p
- */
diff --git a/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h b/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h
deleted file mode 100644
index b094fd9..0000000
--- a/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/**
- * @file IxNpeMhSolicitedCbMgr_p.h
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the private API for the Solicited Callback
- * Manager module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxNpeMhSolicitedCbMgr_p IxNpeMhSolicitedCbMgr_p
- *
- * @brief The private API for the Solicited Callback Manager module.
- * 
- * @{
- */
-
-#ifndef IXNPEMHSOLICITEDCBMGR_P_H
-#define IXNPEMHSOLICITEDCBMGR_P_H
-
-#include "IxNpeMh.h"
-#include "IxOsalTypes.h"
-
-/*
- * #defines for function return types, etc.
- */
-
-/** Maximum number of solicited callbacks that can be stored in the list */
-#define IX_NPEMH_MAX_CALLBACKS (16)
-
-/*
- * Prototypes for interface functions.
- */
-
-/**
- * @fn void ixNpeMhSolicitedCbMgrInitialize (void)
- *
- * @brief This function initializes the Solicited Callback Manager module,
- * setting up a callback data structure for each NPE.
- *
- * @return No return value.
- */
-
-void ixNpeMhSolicitedCbMgrInitialize (void);
-
-/**
- * @fn IX_STATUS ixNpeMhSolicitedCbMgrCallbackSave (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessageId solicitedMessageId,
-           IxNpeMhCallback solicitedCallback)
- *
- * @brief This function saves a callback in the specified NPE's callback
- * list.  If the callback list is full the function will fail.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE in whose callback
- * list the callback will be saved.
- * @param IxNpeMhMessageId solicitedMessageId (in) - The ID of the message
- * that this callback is for.
- * @param IxNpeMhCallback solicitedCallback (in) - The callback function
- * pointer to save.
- *
- * @return The function returns a status indicating success or failure.
- */
-
-IX_STATUS ixNpeMhSolicitedCbMgrCallbackSave (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId solicitedMessageId,
-    IxNpeMhCallback solicitedCallback);
-
-/**
- * @fn void ixNpeMhSolicitedCbMgrCallbackRetrieve (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessageId solicitedMessageId,
-           IxNpeMhCallback *solicitedCallback)
- *
- * @brief This function retrieves the first ID-matching callback from the
- * specified NPE's callback list.  If no matching callback can be found the
- * function will fail.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE from whose callback
- * list the callback will be retrieved.
- * @param IxNpeMhMessageId solicitedMessageId (in) - The ID of the message
- * that the callback is for.
- * @param IxNpeMhCallback solicitedCallback (out) - The callback function
- * pointer retrieved.
- *
- * @return No return value.
- */
-
-void ixNpeMhSolicitedCbMgrCallbackRetrieve (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId solicitedMessageId,
-    IxNpeMhCallback *solicitedCallback);
-
-/**
- * @fn void ixNpeMhSolicitedCbMgrShow (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will display the current state of the Solicited
- * Callback Manager module.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to display state
- * information for.
- *
- * @return No return value.
- */
-
-void ixNpeMhSolicitedCbMgrShow (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn void ixNpeMhSolicitedCbMgrShowReset (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will reset the current state of the Solicited
- * Callback Manager module.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to reset state
- * information for.
- *
- * @return No return value.
- */
-
-void ixNpeMhSolicitedCbMgrShowReset (
-    IxNpeMhNpeId npeId);
-
-#endif /* IXNPEMHSOLICITEDCBMGR_P_H */
-
-/**
- * @} defgroup IxNpeMhSolicitedCbMgr_p
- */
diff --git a/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h b/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h
deleted file mode 100644
index faf6638..0000000
--- a/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/**
- * @file IxNpeMhUnsolicitedCbMgr_p.h
- *
- * @author Intel Corporation
- * @date 18 Jan 2002
- *
- * @brief This file contains the private API for the Unsolicited Callback
- * Manager module.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxNpeMhUnsolicitedCbMgr_p IxNpeMhUnsolicitedCbMgr_p
- *
- * @brief The private API for the Unsolicited Callback Manager module.
- * 
- * @{
- */
-
-#ifndef IXNPEMHUNSOLICITEDCBMGR_P_H
-#define IXNPEMHUNSOLICITEDCBMGR_P_H
-
-#include "IxNpeMh.h"
-#include "IxOsalTypes.h"
-
-/*
- * #defines for function return types, etc.
- */
-
-/*
- * Prototypes for interface functions.
- */
-
-/**
- * @fn void ixNpeMhUnsolicitedCbMgrInitialize (void)
- *
- * @brief This function initializes the Unsolicited Callback Manager
- * module, setting up a callback data structure for each NPE.
- *
- * @return No return value.
- */
-
-void ixNpeMhUnsolicitedCbMgrInitialize (void);
-
-/**
- * @fn void ixNpeMhUnsolicitedCbMgrCallbackSave (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessageId unsolicitedMessageId,
-           IxNpeMhCallback unsolicitedCallback)
- *
- * @brief This function saves a callback in the specified NPE's callback
- * table.  If a callback already exists for the specified ID then it will
- * be overwritten.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE in whose callback
- * table the callback will be saved.
- * @param IxNpeMhMessageId unsolicitedMessageId (in) - The ID of the
- * messages that this callback is for.
- * @param IxNpeMhCallback unsolicitedCallback (in) - The callback function
- * pointer to save.
- *
- * @return No return value.
- */
-
-void ixNpeMhUnsolicitedCbMgrCallbackSave (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId unsolicitedMessageId,
-    IxNpeMhCallback unsolicitedCallback);
-
-/**
- * @fn void ixNpeMhUnsolicitedCbMgrCallbackRetrieve (
-           IxNpeMhNpeId npeId,
-           IxNpeMhMessageId unsolicitedMessageId,
-           IxNpeMhCallback *unsolicitedCallback)
- *
- * @brief This function retrieves the callback for the specified ID from
- * the specified NPE's callback table.  If no callback is registered for
- * the specified ID and NPE then a callback value of NULL will be returned.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE from whose callback
- * table the callback will be retrieved.
- * @param IxNpeMhMessageId unsolicitedMessageId (in) - The ID of the
- * messages that the callback is for.
- * @param IxNpeMhCallback unsolicitedCallback (out) - The callback function
- * pointer retrieved.
- *
- * @return No return value.
- */
-
-void ixNpeMhUnsolicitedCbMgrCallbackRetrieve (
-    IxNpeMhNpeId npeId,
-    IxNpeMhMessageId unsolicitedMessageId,
-    IxNpeMhCallback *unsolicitedCallback);
-
-/**
- * @fn void ixNpeMhUnsolicitedCbMgrShow (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will display the current state of the Unsolicited
- * Callback Manager module.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to display state
- * information for.
- *
- * @return No return value.
- */
-
-void ixNpeMhUnsolicitedCbMgrShow (
-    IxNpeMhNpeId npeId);
-
-/**
- * @fn void ixNpeMhUnsolicitedCbMgrShowReset (
-           IxNpeMhNpeId npeId)
- *
- * @brief This function will reset the current state of the Unsolicited
- * Callback Manager module.
- *
- * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to reset state
- * information for.
- *
- * @return No return value.
- */
-
-void ixNpeMhUnsolicitedCbMgrShowReset (
-    IxNpeMhNpeId npeId);
-
-#endif /* IXNPEMHUNSOLICITEDCBMGR_P_H */
-
-/**
- * @} defgroup IxNpeMhUnsolicitedCbMgr_p
- */
diff --git a/drivers/net/npe/include/IxNpeMicrocode.h b/drivers/net/npe/include/IxNpeMicrocode.h
deleted file mode 100644
index 01dcd7a..0000000
--- a/drivers/net/npe/include/IxNpeMicrocode.h
+++ /dev/null
@@ -1,272 +0,0 @@
-/**
- * @date   April 18, 2005
- *
- * @brief  IXP400 NPE Microcode Image file
- *
- * This file was generated by the IxNpeDlImageGen tool.
- * It contains a NPE microcode image suitable for use
- * with the NPE Downloader (IxNpeDl) component in the
- * IXP400 Access Driver software library.
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxNpeMicrocode IXP400 NPE Microcode Image Library
- *
- * @brief Library containing a set of NPE firmware images, for use
- * with NPE Downloader s/w component
- *
- * @{
- */
-
-/**
- * @def IX_NPE_IMAGE_INCLUDE
- *
- * @brief Wrap the following Image identifiers with "#if IX_NPE_IMAGE_INCLUDE ... #endif" to include the image in the library
- */
-#define IX_NPE_IMAGE_INCLUDE 1
-
-/**
- * @def IX_NPE_IMAGE_OMIT
- *
- * @brief Wrap the following Image identifiers with "#if IX_NPE_IMAGE_OMIT ... #endif" to OMIT the image from the library
- */
-#define IX_NPE_IMAGE_OMIT    0
-
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEA_HSS0
- *
- * @brief NPE Image Id for NPE-A with HSS-0 Only feature.  It supports 32 channelized and 4 packetized.
- */
-#define IX_NPEDL_NPEIMAGE_NPEA_HSS0 0x00010000
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT
- *
- * @brief NPE Image Id for NPE-A with HSS-0 and ATM feature. For HSS, it supports 16/32 channelized and 4/0 packetized. For ATM, it supports AAL5, AAL0 and OAM for UTOPIA SPHY, 1 logical port, 32 VCs. It also has Fast Path support.
- */
-#define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT 0x00020000
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT
- *
- * @brief NPE Image Id for NPE-A with HSS-0 and ATM feature. For HSS, it supports 16/32 channelized and 4/0 packetized. For ATM, it supports AAL5, AAL0 and OAM for UTOPIA MPHY, 1 logical port, 32 VCs. It also has Fast Path support.
- */
-#define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT 0x00030000
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT
- *
- * @brief NPE Image Id for NPE-A with ATM-Only feature. It supports AAL5, AAL0 and OAM for UTOPIA MPHY, 12 logical ports, 32 VCs. It also has Fast Path support.
- */
-#define IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT 0x00040000
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEA_DMA
- *
- * @brief NPE Image Id for NPE-A with DMA-Only feature.
- */
-#define IX_NPEDL_NPEIMAGE_NPEA_DMA 0x00150100
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT
- *
- * @brief NPE Image Id for NPE-A with HSS-0 and HSS-1 feature. Each HSS port supports 32 channelized and 4 packetized.
- */
-#define IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT 0x00090000
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEA_ETH
- *
- * @brief NPE Image Id for NPE-A with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL
- */
-#define IX_NPEDL_NPEIMAGE_NPEA_ETH 0x10800200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL
- *
- * @brief NPE Image Id for NPE-A with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL
- */
-#define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL 0x10800200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
- *
- * @brief NPE Image Id for NPE-A with Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL, VLAN_QOS
- */
-#define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS 0x10810200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
- *
- * @brief NPE Image Id for NPE-A with Ethernet Rx/Tx which includes: SPANNING_TREE, FIREWALL, VLAN_QOS, HEADER_CONVERSION
- */
-#define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV 0x10820200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEB_ETH
- *
- * @brief NPE Image Id for NPE-B with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL
- */
-#define IX_NPEDL_NPEIMAGE_NPEB_ETH 0x01000200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL
- *
- * @brief NPE Image Id for NPE-B with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL
- */
-#define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL 0x01000200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
- *
- * @brief NPE Image Id for NPE-B with Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL, VLAN_QOS
- */
-#define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS 0x01010200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
- *
- * @brief NPE Image Id for NPE-B with Ethernet Rx/Tx which includes: SPANNING_TREE, FIREWALL, VLAN_QOS, HEADER_CONVERSION
- */
-#define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV 0x01020200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEB_DMA
- *
- * @brief NPE Image Id for NPE-B with DMA-Only feature.
- */
-#define IX_NPEDL_NPEIMAGE_NPEB_DMA 0x01020100
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEC_ETH
- *
- * @brief NPE Image Id for NPE-C with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL
- */
-#define IX_NPEDL_NPEIMAGE_NPEC_ETH 0x02000200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL
- *
- * @brief NPE Image Id for NPE-C with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL
- */
-#define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL 0x02000200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
- *
- * @brief NPE Image Id for NPE-C with Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL, VLAN_QOS
- */
-#define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS 0x02010200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
- *
- * @brief NPE Image Id for NPE-C with Ethernet Rx/Tx which includes: SPANNING_TREE, FIREWALL, VLAN_QOS, HEADER_CONVERSION
- */
-#define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV 0x02020200
-#endif
-
-#if IX_NPE_IMAGE_INCLUDE
-/**
- * @def IX_NPEDL_NPEIMAGE_NPEC_DMA
- *
- * @brief NPE Image Id for NPE-C with DMA-Only feature.
- */
-#define IX_NPEDL_NPEIMAGE_NPEC_DMA 0x02080100
-#endif
-
-/* Number of NPE firmware images in this library */
-#define IX_NPE_MICROCODE_AVAILABLE_VERSIONS_COUNT 17
-
-/* Location of Microcode Images */
-#ifdef IX_NPE_MICROCODE_FIRMWARE_INCLUDED
-#ifdef IX_NPEDL_READ_MICROCODE_FROM_FILE
-
-extern UINT32* ixNpeMicrocode_binaryArray;
-
-#else
-
-extern unsigned IxNpeMicrocode_array[];
-
-#endif
-#endif
-
-/*
- * sr: undef all but the bare minimum to reduce flash usage for U-Boot
- */
-#undef IX_NPEDL_NPEIMAGE_NPEA_HSS0
-#undef IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT
-#undef IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT
-#undef IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT
-#undef IX_NPEDL_NPEIMAGE_NPEA_DMA
-#undef IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT
-#undef IX_NPEDL_NPEIMAGE_NPEA_ETH
-#undef IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL
-#undef IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
-#undef IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
-#undef IX_NPEDL_NPEIMAGE_NPEB_ETH
-#undef IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL
-/* #undef IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS */
-#undef IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
-#undef IX_NPEDL_NPEIMAGE_NPEB_DMA
-#undef IX_NPEDL_NPEIMAGE_NPEC_ETH
-#undef IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL
-/* #undef IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS */
-#undef IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
-#undef IX_NPEDL_NPEIMAGE_NPEC_DMA
-
-/**
- * @} defgroup IxNpeMicrocode
- */
diff --git a/drivers/net/npe/include/IxOsBufLib.h b/drivers/net/npe/include/IxOsBufLib.h
deleted file mode 100644
index 68341dc..0000000
--- a/drivers/net/npe/include/IxOsBufLib.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/**
- * @file IxOsBufLib.h  (Replaced by OSAL)
- *
- * @date 9 Oct 2002
- *
- * @brief This file contains the mbuf pool initialisation entry point
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- *
- */
-
-#ifndef IXOSBUFLIB_H
-#define IXOSBUFLIB_H
-
-#include "IxOsalBackward.h"
-
-#endif /* IXOSBUFLIB_H */
-
diff --git a/drivers/net/npe/include/IxOsBuffMgt.h b/drivers/net/npe/include/IxOsBuffMgt.h
deleted file mode 100644
index 8b2ee96..0000000
--- a/drivers/net/npe/include/IxOsBuffMgt.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/**
- * @file (Replaced by OSAL)
- *
- * @brief This file includes the OS dependant MBUF header files.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-#ifndef IxOsBuffMgt_inc
-#define IxOsBuffMgt_inc
-
-#include "IxOsalBackward.h"
-
-#endif /* ndef IxOsBuffMgt_inc */
diff --git a/drivers/net/npe/include/IxOsBuffPoolMgt.h b/drivers/net/npe/include/IxOsBuffPoolMgt.h
deleted file mode 100644
index 1e39be2..0000000
--- a/drivers/net/npe/include/IxOsBuffPoolMgt.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/**
- * @file IxOsBuffPoolMgt.h (Replaced by OSAL)
- *
- * @date 9 Oct 2002
- *
- * @brief This file contains the mbuf pool implementation API
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- * This module contains the implementation of the OS Services buffer pool
- * management service.  This module provides routines for creating pools
- * of buffers for exchange of network data, getting and returning buffers
- * from and to the pool, and some other utility functions. 
- * <P>
- * Currently, the pool has 2 underlying implementations - one for the vxWorks
- * OS, and another which attempts to be OS-agnostic so that it can be used on
- * other OS's such as Linux.  The API is largely the same for all OS's,
- * but there are some differences to be aware of.  These are documented
- * in the API descriptions below.
- * <P>
- * The most significant difference is this: when this module is used with
- * the WindRiver VxWorks OS, it will create a pool of vxWorks "MBufs".
- * These can be used directly with the vxWorks "netBufLib" OS Library.
- * For other OS's, it will create a pool of generic buffers.  These may need
- * to be converted into other buffer types (sk_buff's in Linux, for example)
- * before being used with any built-in OS routines available for
- * manipulating network data buffers.
- *
- * @sa IxOsBuffMgt.h
- */
-
-#ifndef IXOSBUFFPOOLMGT_H
-#define IXOSBUFFPOOLMGT_H
-
-#include "IxOsalBackward.h"
-
-#endif  /* IXOSBUFFPOOLMGT_H */
-
diff --git a/drivers/net/npe/include/IxOsCacheMMU.h b/drivers/net/npe/include/IxOsCacheMMU.h
deleted file mode 100644
index 2632cef..0000000
--- a/drivers/net/npe/include/IxOsCacheMMU.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/**
- * @file IxOsCacheMMU.h
- *
- * @brief this file contains the API of the @ref IxCacheMMU component
- * 
- * <hr>
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsCacheMMU_H
-
-#ifndef __doxygen_hide
-#define IxOsCacheMMU_H
-#endif /* __doxygen_hide */
-
-#ifdef __doxygen_HIDE
-#define IX_OS_CACHE_DOXYGEN
-#endif /* __doxygen_HIDE */
-
-#include "IxOsalBackward.h"
-
-#endif /* IxOsCacheMMU_H */
-
diff --git a/drivers/net/npe/include/IxOsPrintf.h b/drivers/net/npe/include/IxOsPrintf.h
deleted file mode 100644
index 7b573a4..0000000
--- a/drivers/net/npe/include/IxOsPrintf.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/**
- * @file IxOsPrintf.h
- *
- * @brief this file contains the API of the @ref IxOsServices component
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#include "IxTypes.h"
-
-#ifndef IxOsPrintf_H
-
-#ifndef __doxygen_hide
-#define IxOsPrintf_H
-#endif /* __doxygen_hide */
-
-#ifdef __wince
-
-#ifndef IX_USE_SERCONSOLE
-
-static int
-ixLogMsg(
-    char *pFormat, 
-    ...
-    )
-{    
-#ifndef IN_KERNEL
-    static WCHAR    pOutputString[256]; 
-	static char     pNarrowStr[256];
-    int             returnCnt = 0; 
-    va_list ap;
-    
-    pOutputString[0] = 0; 
-	pNarrowStr[0] = 0;	
-    
-    va_start(ap, pFormat);
-
-	returnCnt = _vsnprintf(pNarrowStr, 256, pFormat, ap);
-
-    MultiByteToWideChar(
-            CP_ACP, 
-            MB_PRECOMPOSED, 
-            pNarrowStr, 
-            -1, 
-            pOutputString, 
-            256
-            ); 
-
-    OutputDebugString(pOutputString);
-
-    return returnCnt; 
-#else
-    return 0; 
-#endif
-}
-#define printf ixLogMsg
-
-#endif /* IX_USE_SERCONSOLE */
-
-#endif /* __wince */
-
-/**
- * @} IxOsPrintf
- */
-
-#endif /* IxOsPrintf_H */
diff --git a/drivers/net/npe/include/IxOsServices.h b/drivers/net/npe/include/IxOsServices.h
deleted file mode 100644
index d3b8850..0000000
--- a/drivers/net/npe/include/IxOsServices.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/**
- * @file (Replaced by OSAL)
- *
- * @brief this file contains the API of the @ref IxOsServices component
- * 
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-#ifndef IxOsServices_H
-
-#ifndef __doxygen_hide
-#define IxOsServices_H
-#endif /* __doxygen_hide */
-
-#include "IxOsalBackward.h"
-
-#endif /* IxOsServices_H */
-
-
diff --git a/drivers/net/npe/include/IxOsServicesComponents.h b/drivers/net/npe/include/IxOsServicesComponents.h
deleted file mode 100644
index c5a6f68..0000000
--- a/drivers/net/npe/include/IxOsServicesComponents.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/**
- * @file IxOsServicesComponents.h (Replaced by OSAL)
- *
- * @brief Header file for memory access
- *
- * @par
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsServicesComponents_H
-#define IxOsServicesComponents_H
-
-#include "IxOsalBackward.h"
- * codelets_parityENAcc
- * timeSyncAcc
- * parityENAcc
- * sspAcc
- * i2c
- * integration_sspAcc
- * integration_i2c
-#define ix_timeSyncAcc         36
-#define ix_parityENAcc         37
-#define ix_codelets_parityENAcc     38
-#define ix_sspAcc              39
-#define ix_i2c                 40
-#define ix_integration_sspAcc  41
-#define ix_integration_i2c     42
-#define ix_osal		       43
-#define ix_integration_parityENAcc  44
-#define ix_integration_timeSyncAcc  45
-
-/***************************
- * timeSyncAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_timeSyncAcc)
-
-#if defined (IX_OSSERV_VXWORKS_LE)
-
-#define CSR_LE_DATA_COHERENT_MAPPING
-
-#endif /* IX_OSSERV_VXWORKS_LE */
-
-#endif /* timeSyncAcc */
-
-/***************************
- * parityENAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_parityENAcc)
-
-#if defined (IX_OSSERV_VXWORKS_LE)
-
-#define CSR_LE_DATA_COHERENT_MAPPING
-
-#endif /* IX_OSSERV_VXWORKS_LE */
-
-#endif /* parityENAcc */
-
-/***************************
- * codelets_parityENAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_codelets_parityENAcc)
-
-#if defined (IX_OSSERV_VXWORKS_LE)
-
-#define CSR_LE_DATA_COHERENT_MAPPING
-
-#endif /* IX_OSSERV_VXWORKS_LE */
-
-#endif /* codelets_parityENAcc */
-
-#endif /* IxOsServicesComponents_H */
-
-/***************************
- * integration_timeSyncAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_integration_timeSyncAcc)
-
-#if defined (IX_OSSERV_VXWORKS_LE)
-
-#define CSR_LE_DATA_COHERENT_MAPPING
-
-#endif /* IX_OSSERV_VXWORKS_LE */
-
-#endif /* integration_timeSyncAcc */
-
-/***************************
- * integration_parityENAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_integration_parityENAcc)
-
-#if defined (IX_OSSERV_VXWORKS_LE)
-
-#define CSR_LE_DATA_COHERENT_MAPPING
-
-#endif /* IX_OSSERV_VXWORKS_LE */
-
-#endif /* integration_parityENAcc */
diff --git a/drivers/net/npe/include/IxOsServicesEndianess.h b/drivers/net/npe/include/IxOsServicesEndianess.h
deleted file mode 100644
index 383e30a..0000000
--- a/drivers/net/npe/include/IxOsServicesEndianess.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/** 
- * @file IxOsServicesEndianess.h (Replaced by OSAL)
- * 
- * @brief Header file for determining system endianess and OS
- * 
- * @par
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
- 
-#ifndef IxOsServicesEndianess_H
-#define IxOsServicesEndianess_H
-
-#include "IxOsalBackward.h"
-
-#endif /* IxOsServicesEndianess_H */
diff --git a/drivers/net/npe/include/IxOsServicesMemAccess.h b/drivers/net/npe/include/IxOsServicesMemAccess.h
deleted file mode 100644
index 896db14..0000000
--- a/drivers/net/npe/include/IxOsServicesMemAccess.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/** 
- * @file IxOsServicesMemAccess.h (Replaced by OSAL)
- * 
- * @brief Header file for memory access
- * 
- * @par
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsServicesMemAccess_H
-#define IxOsServicesMemAccess_H
-
-#include "IxOsalBackward.h"
-
-#endif /* IxOsServicesMemAccess_H */
diff --git a/drivers/net/npe/include/IxOsServicesMemMap.h b/drivers/net/npe/include/IxOsServicesMemMap.h
deleted file mode 100644
index 8af1081..0000000
--- a/drivers/net/npe/include/IxOsServicesMemMap.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/**
- * @file IxOsServicesMemMap.h (Replaced by OSAL)
- * 
- * @brief Header file for memory access maps
- * 
- * @par
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsServicesMemMap_H
-#define IxOsServicesMemMap_H
-
-#include "IxOsalBackward.h"
-#define IX_OSSERV_ETH_NPEA_MAP_SIZE           (0x1000)     /**< Eth for NPEA map size */
-#define IX_OSSERV_ETH_NPEA_PHYS_BASE           IXP425_Eth_NPEA_BASE_PHYS
-
-#endif /* IxOsServicesMemMap_H */
diff --git a/drivers/net/npe/include/IxOsal.h b/drivers/net/npe/include/IxOsal.h
deleted file mode 100644
index ac2631c..0000000
--- a/drivers/net/npe/include/IxOsal.h
+++ /dev/null
@@ -1,1493 +0,0 @@
-/**
- * @file IxOsal.h
- *
- * @brief Top include file for OSAL 
- * 
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsal_H
-#define IxOsal_H
-
-/* Basic types */
-#include "IxOsalTypes.h"
-
-/* Include assert */
-#include "IxOsalAssert.h"
-
-/* 
- * Config header gives users option to choose IO MEM 
- * and buffer management modules 
- */
-
-#include "IxOsalConfig.h"
-
-/*
- * Symbol file needed by some OS.
- */
-#include "IxOsalUtilitySymbols.h"
-
-/* OS-specific header */
-#include "IxOsalOs.h"
-
-
-/**
- * @defgroup IxOsal Operating System Abstraction Layer (IxOsal) API
- *
- * @brief This service provides a thin layer of OS dependency services. 
- *
- * This file contains the API to the functions which are some what OS dependant and would
- * require porting to a particular OS. 
- * A primary focus of the component development is to make them as OS independent as possible.
- * All other components should abstract their OS dependency to this module.
- * Services overview
- *	-# Data types, constants, defines
- *	-# Interrupts
- *              - bind interrupts to handlers
- *              - unbind interrupts from handlers
- *             	- disables all interrupts 
- *              - enables all interrupts 
- *              - selectively disables interrupts 
- *              - enables an interrupt level 
- *              - disables an interrupt level 
- *      -# Memory
- *              - allocates memory
- *              - frees memory 
- *              - copies memory zones 
- *              - fills a memory zone 
- *              - allocates cache-safe memory 
- *              - frees cache-safe memory 
- *              - physical to virtual address translation 
- *              - virtual to physical address translation 
- *              - cache to memory flush 
- *              - cache line invalidate 
- *      -# Threads
- *              - creates a new thread 
- *              - starts a newly created thread 
- *              - kills an existing thread 
- *              - exits a running thread 
- *              - sets the priority of an existing thread 
- *              - suspends thread execution 
- *              - resumes thread execution 
- *      -# IPC
- *              - creates a message queue 
- *              - deletes a message queue 
- *              - sends a message to a message queue 
- *              - receives a message from a message queue
- *      -# Thread Synchronisation
- *              - initializes a mutex 
- *              - locks a mutex 
- *              - unlocks a mutex 
- *              - non-blocking attempt to lock a mutex 
- *              - destroys a mutex object 
- *              - initializes a fast mutex 
- *              - non-blocking attempt to lock a fast mutex 
- *              - unlocks a fast mutex 
- *              - destroys a fast mutex object 
- *              - initializes a semaphore 
- *              - posts to (increments) a semaphore 
- *              - waits on (decrements) a semaphore 
- *              - non-blocking wait on semaphore 
- *              - gets semaphore value 
- *              - destroys a semaphore object 
- *              - yields execution of current thread 
- *      -# Time functions
- *              - yielding sleep for a number of milliseconds 
- *              - busy sleep for a number of microseconds 
- *              - value of the timestamp counter 
- *              - resolution of the timestamp counter 
- *              - system clock rate, in ticks 
- *              - current system time 
- *              - converts ixOsalTimeVal into ticks 
- *              - converts ticks into ixOsalTimeVal 
- *              - converts ixOsalTimeVal to milliseconds 
- *              - converts milliseconds to IxOsalTimeval 
- *              - "equal" comparison for IxOsalTimeval 
- *              - "less than" comparison for IxOsalTimeval 
- *              - "greater than" comparison for IxOsalTimeval 
- *              - "add" operator for IxOsalTimeval 
- *              - "subtract" operator for IxOsalTimeval 
- *      -# Logging
- *              - sets the current logging verbosity level 
- *              - interrupt-safe logging function 
- *      -# Timer services
- *              - schedules a repeating timer 
- *              - schedules a single-shot timer 
- *              - cancels a running timer 
- *              - displays all the running timers 
- *      -# Optional Modules
- *              - Buffer management module
- *              - I/O memory and endianess support module
- *
- * @{
- */
-
-
-/*
- * Prototypes
- */
-
-/* ==========================  Interrupts  ================================
- * 
- */
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Binds an interrupt handler to an interrupt level
- *
- * @param irqLevel (in)   - interrupt level
- * @param irqHandler (in) - interrupt handler
- * @param parameter (in)  - custom parameter to be passed to the
- *                          interrupt handler
- *
- * Binds an interrupt handler to an interrupt level. The operation will
- * fail if the wrong level is selected, if the handler is NULL, or if the
- * interrupt is already bound. This functions binds the specified C
- * routine to an interrupt level. When called, the "parameter" value will
- * be passed to the routine.
- *
- * Reentrant: no
- * IRQ safe:  no
- *
- * @return IX_SUCCESS if the operation succeeded or IX_FAIL otherwise
- */
-PUBLIC IX_STATUS ixOsalIrqBind (UINT32 irqLevel,
-				IxOsalVoidFnVoidPtr irqHandler,
-				void *parameter);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Unbinds an interrupt handler from an interrupt level
- *
- * @param irqLevel (in)   - interrupt level
- *
- * Unbinds the selected interrupt level from any previously registered
- * handler 
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return IX_SUCCESS if the operation succeeded or IX_FAIL otherwise
- */
-PUBLIC IX_STATUS ixOsalIrqUnbind (UINT32 irqLevel);
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Disables all interrupts
- *
- * @param - none
- *
- * Disables all the interrupts and prevents tasks scheduling 
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return interrupt enable status prior to locking
- */
-PUBLIC UINT32 ixOsalIrqLock (void);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Enables all interrupts
- *
- * @param irqEnable (in) - interrupt enable status, prior to interrupt
- *                         locking 
- *
- * Enables the interrupts and task scheduling, cancelling the effect
- * of ixOsalIrqLock() 
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return IX_SUCCESS if the operation succeeded or IX_FAIL otherwise
- */
-PUBLIC void ixOsalIrqUnlock (UINT32 irqEnable);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Selectively disables interrupts
- *
- * @param irqLevel - new interrupt level
- *
- * Disables the interrupts below the specified interrupt level 
- * 
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @note Depending on the implementation this function can disable all
- *       the interrupts 
- *
- * @return previous interrupt level
- */
-PUBLIC UINT32 ixOsalIrqLevelSet (UINT32 irqLevel);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Enables an interrupt level
- *
- * @param irqLevel - interrupt level to enable
- *
- * Enables the specified interrupt level
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return - none
- */
-PUBLIC void ixOsalIrqEnable (UINT32 irqLevel);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Disables an interrupt level
- *
- * @param irqLevel - interrupt level to disable
- *
- * Disables the specified interrupt level
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return - none
- */
-PUBLIC void ixOsalIrqDisable (UINT32 irqLevel);
-
-
-/* =============================  Memory  =================================
- * 
- */
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Allocates memory
- *
- * @param size - memory size to allocate, in bytes
- *
- * Allocates a memory zone of a given size
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return Pointer to the allocated zone or NULL if the allocation failed
- */
-PUBLIC void *ixOsalMemAlloc (UINT32 size);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Frees memory
- *
- * @param ptr - pointer to the memory zone
- *
- * Frees a previously allocated memory zone
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - none
- */
-PUBLIC void ixOsalMemFree (void *ptr);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Copies memory zones
- *
- * @param dest  - destination memory zone
- * @param src   - source memory zone
- * @param count - number of bytes to copy
- *
- * Copies count bytes from the source memory zone pointed by src into the
- * memory zone pointed by dest.
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return Pointer to the destination memory zone
- */
-PUBLIC void *ixOsalMemCopy (void *dest, void *src, UINT32 count);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Fills a memory zone
- *
- * @param ptr - pointer to the memory zone
- * @param filler - byte to fill the memory zone with
- * @param count - number of bytes to fill
- *
- * Fills a memory zone with a given constant byte
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return Pointer to the memory zone
- */
-PUBLIC void *ixOsalMemSet (void *ptr, UINT8 filler, UINT32 count);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Allocates cache-safe memory
- *
- * @param size - size, in bytes, of the allocated zone
- *
- * Allocates a cache-safe memory zone of at least "size" bytes and returns
- * the pointer to the memory zone. This memory zone, depending on the
- * platform, is either uncached or aligned on a cache line boundary to make
- * the CACHE_FLUSH and CACHE_INVALIDATE macros safe to use. The memory
- * allocated with this function MUST be freed with ixOsalCacheDmaFree(),
- * otherwise memory corruption can occur.
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return Pointer to the memory zone or NULL if allocation failed
- *
- * @note It is important to note that cache coherence is maintained in
- * software by using the IX_OSAL_CACHE_FLUSH and IX_OSAL_CACHE_INVALIDATE
- * macros to maintain consistency between cache and external memory.
- */
-PUBLIC void *ixOsalCacheDmaMalloc (UINT32 size);
-
-/* Macros for ixOsalCacheDmaMalloc*/
-#define IX_OSAL_CACHE_DMA_MALLOC(size) ixOsalCacheDmaMalloc(size)
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Frees cache-safe memory
- *
- * @param ptr   - pointer to the memory zone
- *
- * Frees a memory zone previously allocated with ixOsalCacheDmaMalloc()
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - none
- */
-PUBLIC void ixOsalCacheDmaFree (void *ptr);
-
-#define IX_OSAL_CACHE_DMA_FREE(ptr)		ixOsalCacheDmaFree(ptr)
-
-/** 
- * @ingroup IxOsal
- *
- * @brief physical to virtual address translation
- *
- * @param physAddr - physical address
- *
- * Converts a physical address into its equivalent MMU-mapped virtual address
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return Corresponding virtual address, as UINT32
- */
-#define IX_OSAL_MMU_PHYS_TO_VIRT(physAddr) \
-    IX_OSAL_OS_MMU_PHYS_TO_VIRT(physAddr)
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief virtual to physical address translation
- *
- * @param virtAddr - virtual address
- *
- * Converts a virtual address into its equivalent MMU-mapped physical address
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return Corresponding physical address, as UINT32
- */
-#define IX_OSAL_MMU_VIRT_TO_PHYS(virtAddr)  \
-    IX_OSAL_OS_MMU_VIRT_TO_PHYS(virtAddr)
-
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief cache to memory flush
- *
- * @param addr - memory address to flush from cache
- * @param size - number of bytes to flush (rounded up to a cache line)
- *
- * Flushes the cached value of the memory zone pointed by "addr" into memory,
- * rounding up to a cache line. Use before the zone is to be read by a
- * processing unit which is not cache coherent with the main CPU.
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return - none
- */
-#define IX_OSAL_CACHE_FLUSH(addr, size)  IX_OSAL_OS_CACHE_FLUSH(addr, size)
-
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief cache line invalidate
- *
- * @param addr - memory address to invalidate in cache
- * @param size - number of bytes to invalidate (rounded up to a cache line)
- *
- * Invalidates the cached value of the memory zone pointed by "addr",
- * rounding up to a cache line. Use before reading the zone from the main
- * CPU, if the zone has been updated by a processing unit which is not cache
- * coherent with the main CPU.
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return - none
- */
-#define IX_OSAL_CACHE_INVALIDATE(addr, size)  IX_OSAL_OS_CACHE_INVALIDATE(addr, size)
-
-
-/* =============================  Threads  =================================
- * 
- */
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Creates a new thread
- *
- * @param thread - handle of the thread to be created
- * @param threadAttr - pointer to a thread attribute object
- * @param startRoutine - thread entry point
- * @param arg - argument given to the thread
- *
- * Creates a thread given a thread handle and a thread attribute object. The
- * same thread attribute object can be used to create separate threads. "NULL"
- * can be specified as the attribute, in which case the default values will
- * be used. The thread needs to be explicitly started using ixOsalThreadStart().
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalThreadCreate (IxOsalThread * thread,
-				     IxOsalThreadAttr * threadAttr,
-				     IxOsalVoidFnVoidPtr startRoutine,
-				     void *arg);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Starts a newly created thread
- *
- * @param thread - handle of the thread to be started
- *
- * Starts a thread given its thread handle. This function is to be called
- * only once, following the thread initialization.
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalThreadStart (IxOsalThread * thread);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Kills an existing thread
- *
- * @param thread - handle of the thread to be killed
- *
- * Kills a thread given its thread handle.
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @note It is not possible to kill threads in Linux kernel mode. This 
- * function will only send a SIGTERM signal, and it is the responsibility
- * of the thread to check for the presence of this signal with
- * signal_pending().
- *
- * @return -  IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalThreadKill (IxOsalThread * thread);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Exits a running thread
- *
- * Terminates the calling thread
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - This function never returns
- */
-PUBLIC void ixOsalThreadExit (void);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Sets the priority of an existing thread
- *
- * @param thread - handle of the thread
- * @param priority - new priority, between 0 and 255 (0 being the highest)
- *
- * Sets the thread priority
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalThreadPrioritySet (IxOsalThread * thread,
-					  UINT32 priority);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Suspends thread execution
- *
- * @param thread - handle of the thread
- *
- * Suspends the thread execution
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalThreadSuspend (IxOsalThread * thread);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Resumes thread execution
- *
- * @param thread - handle of the thread
- *
- * Resumes the thread execution
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalThreadResume (IxOsalThread * thread);
-
-
-/* =======================  Message Queues (IPC) ==========================
- * 
- */
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Creates a message queue
- *
- * @param queue - queue handle
- * @param msgCount - maximum number of messages to hold in the queue
- * @param msgLen - maximum length of each message, in bytes
- *
- * Creates a message queue of msgCount messages, each containing msgLen bytes
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalMessageQueueCreate (IxOsalMessageQueue * queue,
-					   UINT32 msgCount, UINT32 msgLen);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Deletes a message queue
- *
- * @param queue - queue handle
- *
- * Deletes a message queue
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalMessageQueueDelete (IxOsalMessageQueue * queue);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Sends a message to a message queue
- *
- * @param queue - queue handle
- * @param message - message to send
- *
- * Sends a message to the message queue. The message will be copied (at the
- * configured size of the message) into the queue.
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalMessageQueueSend (IxOsalMessageQueue * queue,
-					 UINT8 * message);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Receives a message from a message queue
- *
- * @param queue - queue handle
- * @param message - pointer to where the message should be copied to
- *
- * Retrieves the first message from the message queue
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalMessageQueueReceive (IxOsalMessageQueue * queue,
-					    UINT8 * message);
-
-
-/* =======================  Thread Synchronisation ========================
- * 
- */
-
-/** 
- * @ingroup IxOsal
- *
- * @brief initializes a mutex
- *
- * @param mutex - mutex handle
- *
- * Initializes a mutex object
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalMutexInit (IxOsalMutex * mutex);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief locks a mutex
- *
- * @param mutex - mutex handle
- * @param timeout - timeout in ms; IX_OSAL_WAIT_FOREVER (-1) to wait forever
- *                  or IX_OSAL_WAIT_NONE to return immediately
- *
- * Locks a mutex object
- *
- * @li Reentrant: yes
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalMutexLock (IxOsalMutex * mutex, INT32 timeout);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Unlocks a mutex
- *
- * @param mutex - mutex handle
- *
- * Unlocks a mutex object
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalMutexUnlock (IxOsalMutex * mutex);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Non-blocking attempt to lock a mutex
- *
- * @param mutex - mutex handle
- *
- * Attempts to lock a mutex object, returning immediately with IX_SUCCESS if
- * the lock was successful or IX_FAIL if the lock failed
- *
- * @li Reentrant: yes
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalMutexTryLock (IxOsalMutex * mutex);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Destroys a mutex object
- *
- * @param mutex - mutex handle
- * @param
- *
- * Destroys a mutex object; the caller should ensure that no thread is
- * blocked on this mutex
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalMutexDestroy (IxOsalMutex * mutex);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Initializes a fast mutex
- *
- * @param mutex - fast mutex handle
- *
- * Initializes a fast mutex object
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalFastMutexInit (IxOsalFastMutex * mutex);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Non-blocking attempt to lock a fast mutex
- *
- * @param mutex - fast mutex handle
- *
- * Attempts to lock a fast mutex object, returning immediately with
- * IX_SUCCESS if the lock was successful or IX_FAIL if the lock failed
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalFastMutexTryLock (IxOsalFastMutex * mutex);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Unlocks a fast mutex
- *
- * @param mutex - fast mutex handle
- *
- * Unlocks a fast mutex object
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalFastMutexUnlock (IxOsalFastMutex * mutex);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Destroys a fast mutex object
- *
- * @param mutex - fast mutex handle
- *
- * Destroys a fast mutex object
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalFastMutexDestroy (IxOsalFastMutex * mutex);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Initializes a semaphore
- *
- * @param semaphore - semaphore handle
- * @param value - initial semaphore value
- *
- * Initializes a semaphore object
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalSemaphoreInit (IxOsalSemaphore * semaphore,
-				      UINT32 value);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Posts to (increments) a semaphore
- *
- * @param semaphore - semaphore handle
- *
- * Increments a semaphore object
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalSemaphorePost (IxOsalSemaphore * semaphore);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Waits on (decrements) a semaphore
- *
- * @param semaphore - semaphore handle
- * @param timeout - timeout, in ms; IX_OSAL_WAIT_FOREVER (-1) if the thread
- * is to block indefinitely or IX_OSAL_WAIT_NONE (0) if the thread is to
- * return immediately even if the call fails
- *
- * Decrements a semaphore, blocking if the semaphore is
- * unavailable (value is 0).
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalSemaphoreWait (IxOsalSemaphore * semaphore,
-				      INT32 timeout);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Non-blocking wait on semaphore
- *
- * @param semaphore - semaphore handle
- *
- * Decrements a semaphore, not blocking the calling thread if the semaphore
- * is unavailable
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalSemaphoreTryWait (IxOsalSemaphore * semaphore);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Gets semaphore value
- *
- * @param semaphore - semaphore handle
- * @param value - location to store the semaphore value
- *
- * Retrieves the current value of a semaphore object
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalSemaphoreGetValue (IxOsalSemaphore * semaphore,
-					  UINT32 * value);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Destroys a semaphore object
- *
- * @param semaphore - semaphore handle
- *
- * Destroys a semaphore object; the caller should ensure that no thread is
- * blocked on this semaphore
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalSemaphoreDestroy (IxOsalSemaphore * semaphore);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Yields execution of current thread
- *
- * Yields the execution of the current thread
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - none
- */
-PUBLIC void ixOsalYield (void);
-
-
-/* ========================== Time functions  ===========================
- * 
- */
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Yielding sleep for a number of milliseconds
- *
- * @param milliseconds - number of milliseconds to sleep
- *
- * The calling thread will sleep for the specified number of milliseconds.
- * This sleep is yielding, hence other tasks will be scheduled by the
- * operating system during the sleep period. Calling this function with an
- * argument of 0 will place the thread at the end of the current scheduling
- * loop.
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - none
- */
-PUBLIC void ixOsalSleep (UINT32 milliseconds);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Busy sleep for a number of microseconds
- *
- * @param microseconds - number of microseconds to sleep
- *
- * Sleeps for the specified number of microseconds, without explicitly
- * yielding thread execution to the OS scheduler
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - none
- */
-PUBLIC void ixOsalBusySleep (UINT32 microseconds);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief XXX
- *
- * Retrieves the current timestamp
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - The current timestamp
- *
- * @note The implementation of this function is platform-specific. Not
- * all the platforms provide a high-resolution timestamp counter.
- */
-PUBLIC UINT32 ixOsalTimestampGet (void);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Resolution of the timestamp counter
- *
- * Retrieves the resolution (frequency) of the timestamp counter.
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - The resolution of the timestamp counter
- *
- * @note The implementation of this function is platform-specific. Not all
- * the platforms provide a high-resolution timestamp counter.
- */
-PUBLIC UINT32 ixOsalTimestampResolutionGet (void);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief System clock rate, in ticks
- *
- * Retrieves the resolution (number of ticks per second) of the system clock
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - The system clock rate
- *
- * @note The implementation of this function is platform and OS-specific.
- * The system clock rate is not always available - e.g. Linux does not
- * provide this information in user mode
- */
-PUBLIC UINT32 ixOsalSysClockRateGet (void);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Current system time
- *
- * @param tv - pointer to an IxOsalTimeval structure to store the current
- *             time in
- *
- * Retrieves the current system time (real-time)
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - none
- *
- * @note The implementation of this function is platform-specific. Not all
- * platforms have a real-time clock.
- */
-PUBLIC void ixOsalTimeGet (IxOsalTimeval * tv);
-
-
-
-/* Internal function to convert timer val to ticks.
- * NOTE - This should not be called by the user.
- * Use the macro IX_OSAL_TIMEVAL_TO_TICKS 
- * OS-independent, implemented in framework.
- */
-PUBLIC UINT32 ixOsalTimevalToTicks (IxOsalTimeval tv);
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Converts ixOsalTimeVal into ticks
- *
- * @param tv - an IxOsalTimeval structure
- *
- * Converts an IxOsalTimeval structure into OS ticks
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - Corresponding number of ticks
- * 
- * Note: This function is OS-independent. Implemented by core.
- */
-#define IX_OSAL_TIMEVAL_TO_TICKS(tv)  ixOsalTimevalToTicks(tv)
-
-
-
-/* Internal function to convert ticks to timer val
- * NOTE - This should not be called by the user.
- * Use the macro IX_OSAL_TICKS_TO_TIMEVAL 
- */
-
-PUBLIC void ixOsalTicksToTimeval (UINT32 ticks, IxOsalTimeval * pTv);
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Converts ticks into ixOsalTimeVal 
- *
- * @param ticks - number of ticks
- * @param pTv - pointer to the destination structure
- *
- * Converts the specified number of ticks into an IxOsalTimeval structure
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - Corresponding IxOsalTimeval structure
- * Note: This function is OS-independent. Implemented by core.
- */
-#define IX_OSAL_TICKS_TO_TIMEVAL(ticks, pTv)  \
-    ixOsalTicksToTimeval(ticks, pTv)
-
-
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Converts ixOsalTimeVal to milliseconds
- *
- * @param tv - IxOsalTimeval structure to convert
- *
- * Converts an IxOsalTimeval structure into milliseconds
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - Corresponding number of milliseconds
- * Note: This function is OS-independent. Implemented by core.
- */
-#define IX_OSAL_TIMEVAL_TO_MS(tv)     ((tv.secs * 1000) + (tv.nsecs / 1000000))
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Converts milliseconds to IxOsalTimeval
- *
- * @param milliseconds - number of milliseconds to convert
- * @param pTv - pointer to the destination structure
- *
- * Converts a millisecond value into an IxOsalTimeval structure
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - Corresponding IxOsalTimeval structure
- * Note: This function is OS-independent. Implemented by core.
- */
-#define IX_OSAL_MS_TO_TIMEVAL(milliseconds, pTv)  \
-   	    ((IxOsalTimeval *) pTv)->secs = milliseconds / 1000;			  \
-        ((IxOsalTimeval *) pTv)->nsecs = (milliseconds % 1000) * 1000000
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief "equal" comparison for IxOsalTimeval
- *
- * @param tvA, tvB - IxOsalTimeval structures to compare
- *
- * Compares two IxOsalTimeval structures for equality
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - true if the structures are equal
- *         - false otherwise
- * Note: This function is OS-independant
- */
-#define IX_OSAL_TIME_EQ(tvA, tvB)        \
-        ((tvA).secs == (tvB).secs && (tvA).nsecs == (tvB).nsecs)
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief "less than" comparison for IxOsalTimeval
- *
- * @param tvA, tvB - IxOsalTimeval structures to compare
- *
- * Compares two IxOsalTimeval structures to determine if the first one is
- * less than the second one
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - true if tvA < tvB
- *         - false otherwise
- * Note: This function is OS-independent. Implemented by core.
- */
-#define IX_OSAL_TIME_LT(tvA,tvB) \
-        ((tvA).secs  < (tvB).secs ||	\
-        ((tvA).secs == (tvB).secs && (tvA).nsecs < (tvB).nsecs))
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief "greater than" comparison for IxOsalTimeval
- *
- * @param tvA, tvB - IxOsalTimeval structures to compare
- *
- * Compares two IxOsalTimeval structures to determine if the first one is
- * greater than the second one
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - true if tvA > tvB
- *         - false  otherwise
- * Note: This function is OS-independent.
- */
-#define IX_OSAL_TIME_GT(tvA, tvB)  \
-        ((tvA).secs  > (tvB).secs ||	\
-        ((tvA).secs == (tvB).secs && (tvA).nsecs > (tvB).nsecs))
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief "add" operator for IxOsalTimeval
- *
- * @param tvA, tvB - IxOsalTimeval structures to add
- *
- * Adds the second IxOsalTimevalStruct to the first one (equivalent to
- * tvA += tvB)
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - none
- * Note: This function is OS-independent.
- */
-#define IX_OSAL_TIME_ADD(tvA, tvB)  \
-        (tvA).secs += (tvB).secs;   \
-        (tvA).nsecs += (tvB).nsecs; \
-        if ((tvA).nsecs >= IX_OSAL_BILLION) \
-    	{ \
-        (tvA).secs++; \
-        (tvA).nsecs -= IX_OSAL_BILLION; }
-
-
-/** 
- * @ingroup IxOsal
- *
- * @brief "subtract" operator for IxOsalTimeval
- *
- * @param tvA, tvB - IxOsalTimeval structures to subtract
- *
- * Subtracts the second IxOsalTimevalStruct from the first one (equivalent
- * to tvA -= tvB)
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - none
- * Note: This function is OS-independent. Implemented by core.
- */
-#define IX_OSAL_TIME_SUB(tvA, tvB)   \
-        if ((tvA).nsecs >= (tvB).nsecs) \
-        { \
-          (tvA).secs -= (tvB).secs; \
-          (tvA).nsecs -= (tvB).nsecs; \
-        } \
-        else \
-        { \
-          (tvA).secs -= ((tvB).secs + 1); \
-          (tvA).nsecs += IX_OSAL_BILLION - (tvB).nsecs; \
-        }
-
-
-/* ============================= Logging  ==============================
- * 
- */
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Interrupt-safe logging function
- *
- * @param level - identifier prefix for the message
- * @param device - output device
- * @param format - message format, in a printf format
- * @param ... - up to 6 arguments to be printed
- *
- * IRQ-safe logging function, similar to printf. Accepts up to 6 arguments
- * to print (excluding the level, device and the format). This function will
- * actually display the message only if the level is lower than the current
- * verbosity level or if the IX_OSAL_LOG_USER level is used. An output device
- * must be specified (see IxOsalTypes.h).
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - Beside the exceptions documented in the note below, the returned
- * value is the number of printed characters, or -1 if the parameters are
- * incorrect (NULL format, unknown output device)
- *
- * @note The exceptions to the return value are:
- * VxWorks: The return value is 32 if the specified level is 1 and 64
- * if the specified level is greater than 1 and less or equal than 9.
- * WinCE: If compiled for EBOOT then the return value is always 0.
- *
- * @note The given print format should take into account the specified 
- * output device. IX_OSAL_STDOUT supports all the usual print formats,
- * however a custom hex display specified by IX_OSAL_HEX would support
- * only a fixed number of hexadecimal digits.
- */
-PUBLIC INT32 ixOsalLog (IxOsalLogLevel level,
-			IxOsalLogDevice device,
-			char *format,
-			int arg1,
-			int arg2, int arg3, int arg4, int arg5, int arg6);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief sets the current logging verbosity level
- *
- * @param level - new log verbosity level
- *
- * Sets the log verbosity level. The default value is IX_OSAL_LOG_ERROR.
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * @return - Old log verbosity level
- */
-PUBLIC UINT32 ixOsalLogLevelSet (UINT32 level);
-
-
-/* ============================= Logging  ==============================
- * 
- */
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Schedules a repeating timer
- *
- * @param timer - handle of the timer object
- * @param period - timer trigger period, in milliseconds
- * @param priority - timer priority (0 being the highest)
- * @param callback - user callback to invoke when the timer triggers
- * @param param - custom parameter passed to the callback
- *
- * Schedules a timer to be called every period milliseconds. The timer
- * will invoke the specified callback function possibly in interrupt
- * context, passing the given parameter. If several timers trigger at the
- * same time contention issues are dealt according to the specified timer
- * priorities.
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalRepeatingTimerSchedule (IxOsalTimer * timer,
-					       UINT32 period,
-					       UINT32 priority,
-					       IxOsalVoidFnVoidPtr callback,
-					       void *param);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Schedules a single-shot timer
- *
- * @param timer - handle of the timer object
- * @param period - timer trigger period, in milliseconds
- * @param priority - timer priority (0 being the highest)
- * @param callback - user callback to invoke when the timer triggers
- * @param param - custom parameter passed to the callback
- *
- * Schedules a timer to be called after period milliseconds. The timer
- * will cease to function past its first trigger. The timer will invoke
- * the specified callback function, possibly in interrupt context, passing
- * the given parameter. If several timers trigger at the same time contention
- * issues are dealt according to the specified timer priorities.
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS
-ixOsalSingleShotTimerSchedule (IxOsalTimer * timer,
-			       UINT32 period,
-			       UINT32 priority,
-			       IxOsalVoidFnVoidPtr callback, void *param);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief Cancels a running timer
- *
- * @param timer - handle of the timer object
- *
- * Cancels a single-shot or repeating timer.
- *
- * @li Reentrant: no
- * @li IRQ safe:  yes
- *
- * @return - IX_SUCCESS/IX_FAIL
- */
-PUBLIC IX_STATUS ixOsalTimerCancel (IxOsalTimer * timer);
-
-/** 
- * @ingroup IxOsal
- *
- * @brief displays all the running timers
- *
- * Displays a list with all the running timers and their parameters (handle,
- * period, type, priority, callback and user parameter)
- *
- * @li Reentrant: no
- * @li IRQ safe:  no
- *
- * @return - none
- */
-PUBLIC void ixOsalTimersShow (void);
-
-
-/* ============================= Version  ==============================
- * 
- */
-
-/**
- * @ingroup IxOsal
- *
- * @brief provides the name of the Operating System running
- *
- * @param osName - Pointer to a NULL-terminated string of characters
- * that holds the name of the OS running.
- * This is both an input and an ouput parameter
- * @param maxSize - Input parameter that defines the maximum number of
- * bytes that can be stored in osName
- *
- * Returns a string of characters that describe the Operating System name
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * return - IX_SUCCESS for successful retrieval
- *        - IX_FAIL if (osType == NULL | maxSize =< 0)
- */
-PUBLIC IX_STATUS ixOsalOsNameGet (INT8* osName, INT32 maxSize);
-
-/**
- * @ingroup IxOsal
- *
- * @brief provides the version of the Operating System running
- *
- * @param osVersion - Pointer to a NULL terminated string of characters
- * that holds the version of the OS running.
- * This is both an input and an ouput parameter
- * @param maxSize - Input parameter that defines the maximum number of
- * bytes that can be stored in osVersion
- *
- * Returns a string of characters that describe the Operating System's version
- *
- * @li Reentrant: yes
- * @li IRQ safe:  yes
- *
- * return - IX_SUCCESS for successful retrieval
- *        - IX_FAIL if (osVersion == NULL | maxSize =< 0)
- */
-PUBLIC IX_STATUS ixOsalOsVersionGet(INT8* osVersion, INT32 maxSize);
-
-
-
-/**
- * @} IxOsal
- */
-
-#endif /* IxOsal_H */
diff --git a/drivers/net/npe/include/IxOsalAssert.h b/drivers/net/npe/include/IxOsalAssert.h
deleted file mode 100644
index ac26bb6..0000000
--- a/drivers/net/npe/include/IxOsalAssert.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * @file        IxOsalAssert.h 
- * @author	Intel Corporation
- * @date        25-08-2004
- *
- * @brief       description goes here
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IX_OSAL_ASSERT_H
-#define IX_OSAL_ASSERT_H
-
-/*
- * Put the system defined include files required
- * @par
- * <TAGGED>
- */
-
-#include "IxOsalOsAssert.h"
-
-/**
- * @brief Assert macro, assert the condition is true. This
- *        will not be compiled out.
- *        N.B. will result in a system crash if it is false.
- */
-#define IX_OSAL_ASSERT(c) IX_OSAL_OS_ASSERT(c)
-
-
-/**
- * @brief Ensure macro, ensure the condition is true.
- *        This will be conditionally compiled out and
- *        may be used for test purposes.
- */
-#ifdef IX_OSAL_ENSURE_ON
-#define IX_OSAL_ENSURE(c, str) do { \
-if (!(c)) ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, str, \
-0, 0, 0, 0, 0, 0); } while (0)
-
-#else
-#define IX_OSAL_ENSURE(c, str)
-#endif
-
-
-#endif /* IX_OSAL_ASSERT_H */
diff --git a/drivers/net/npe/include/IxOsalBackward.h b/drivers/net/npe/include/IxOsalBackward.h
deleted file mode 100644
index 8e4a6fb..0000000
--- a/drivers/net/npe/include/IxOsalBackward.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/** 
- * This file is intended to provide backward 
- * compatibility for main osService/OSSL 
- * APIs. 
- *
- * It shall be phased out gradually and users
- * are strongly recommended to use IX_OSAL API.
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IX_OSAL_BACKWARD_H
-#define IX_OSAL_BACKWARD_H
-
-#include "IxOsal.h"
-
-#include "IxOsalBackwardCacheMMU.h"
-
-#include "IxOsalBackwardOsServices.h"
-
-#include "IxOsalBackwardMemMap.h"
-
-#include "IxOsalBackwardBufferMgt.h"
-
-#include "IxOsalBackwardOssl.h"
-
-#include "IxOsalBackwardAssert.h"
-
-#endif /* IX_OSAL_BACKWARD_H */
diff --git a/drivers/net/npe/include/IxOsalBackwardAssert.h b/drivers/net/npe/include/IxOsalBackwardAssert.h
deleted file mode 100644
index cf50a7a..0000000
--- a/drivers/net/npe/include/IxOsalBackwardAssert.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/** 
- * This file is intended to provide backward 
- * compatibility for main osService/OSSL 
- * APIs. 
- *
- * It shall be phased out gradually and users
- * are strongly recommended to use IX_OSAL API.
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IX_OSAL_BACKWARD_ASSERT_H
-#define IX_OSAL_BACKWARD_ASSERT_H
-
-#define IX_ENSURE(c, str)	IX_OSAL_ENSURE(c, str)
-#define IX_ASSERT(c)		IX_OSAL_ASSERT(c)
-
-#endif /* IX_OSAL_BACKWARD_ASSERT_H */
diff --git a/drivers/net/npe/include/IxOsalBackwardBufferMgt.h b/drivers/net/npe/include/IxOsalBackwardBufferMgt.h
deleted file mode 100644
index 46df29d..0000000
--- a/drivers/net/npe/include/IxOsalBackwardBufferMgt.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/** 
- * This file is intended to provide backward 
- * compatibility for main osService/OSSL 
- * APIs. 
- *
- * It shall be phased out gradually and users
- * are strongly recommended to use IX_OSAL API.
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IX_OSAL_BACKWARD_BUFFER_MGT_H
-#define IX_OSAL_BACKWARD_BUFFER_MGT_H
-
-typedef IX_OSAL_MBUF IX_MBUF;
-
-typedef IX_OSAL_MBUF_POOL IX_MBUF_POOL;
-
-
-#define IX_MBUF_NEXT_BUFFER_IN_PKT_PTR(m_blk_ptr)  \
-		IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(m_blk_ptr)
-
-
-#define IX_MBUF_NEXT_PKT_IN_CHAIN_PTR(m_blk_ptr)  \
-		IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m_blk_ptr)
-
-
-#define IX_MBUF_MDATA(m_blk_ptr)  \
-		IX_OSAL_MBUF_MDATA(m_blk_ptr)
-
-
-#define IX_MBUF_MLEN(m_blk_ptr) \
-		IX_OSAL_MBUF_MLEN(m_blk_ptr)
-
-
-#define IX_MBUF_TYPE(m_blk_ptr) \
-		IX_OSAL_MBUF_MTYPE(m_blk_ptr)
-
-/* Same as IX_MBUF_TYPE */
-#define IX_MBUF_MTYPE(m_blk_ptr) \
-                IX_OSAL_MBUF_MTYPE(m_blk_ptr)
-
-#define IX_MBUF_FLAGS(m_blk_ptr)	\
-		IX_OSAL_MBUF_FLAGS(m_blk_ptr)
-
-
-#define IX_MBUF_NET_POOL(m_blk_ptr)	\
-		IX_OSAL_MBUF_NET_POOL(m_blk_ptr)
-
-
-#define IX_MBUF_PKT_LEN(m_blk_ptr)	\
-		IX_OSAL_MBUF_PKT_LEN(m_blk_ptr)
-
-
-#define IX_MBUF_PRIV(m_blk_ptr)		\
-		IX_OSAL_MBUF_PRIV(m_blk_ptr)
-
-
-#define IX_MBUF_ALLOCATED_BUFF_LEN(m_blk_ptr)  \
-		IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(m_blk_ptr)
-
-
-#define IX_MBUF_ALLOCATED_BUFF_DATA(m_blk_ptr)  \
-		IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(m_blk_ptr)
-
-
-#define IX_MBUF_POOL_SIZE_ALIGN(size)   \
-		IX_OSAL_MBUF_POOL_SIZE_ALIGN(size)
-
-
-#define IX_MBUF_POOL_MBUF_AREA_SIZE_ALIGNED(count)	\
-		IX_OSAL_MBUF_POOL_MBUF_AREA_SIZE_ALIGNED(count)
-
-
-#define IX_MBUF_POOL_DATA_AREA_SIZE_ALIGNED(count, size) \
-		IX_OSAL_MBUF_POOL_DATA_AREA_SIZE_ALIGNED(count, size)
-
-
-#define IX_MBUF_POOL_MBUF_AREA_ALLOC(count, memAreaSize) \
-		IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC(count, memAreaSize)
-
-
-#define IX_MBUF_POOL_DATA_AREA_ALLOC(count, size, memAreaSize) \
-		IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC(count, size, memAreaSize)
-
-IX_STATUS
-ixOsalOsIxp400BackwardPoolInit (IX_OSAL_MBUF_POOL ** poolPtrPtr,
-				UINT32 count, UINT32 size, const char *name);
-
-
-/* This one needs extra steps*/
-#define IX_MBUF_POOL_INIT(poolPtr, count, size, name) \
-		ixOsalOsIxp400BackwardPoolInit( poolPtr, count,  size, name)
-
-
-#define IX_MBUF_POOL_INIT_NO_ALLOC(poolPtrPtr, bufPtr, dataPtr, count, size, name) \
-		(*poolPtrPtr = IX_OSAL_MBUF_NO_ALLOC_POOL_INIT(bufPtr, dataPtr, count, size, name))
-
-
-IX_STATUS
-ixOsalOsIxp400BackwardMbufPoolGet (IX_OSAL_MBUF_POOL * poolPtr,
-				   IX_OSAL_MBUF ** newBufPtrPtr);
-
-#define IX_MBUF_POOL_GET(poolPtr, bufPtrPtr) \
-		ixOsalOsIxp400BackwardMbufPoolGet(poolPtr, bufPtrPtr)
-
-
-#define IX_MBUF_POOL_PUT(bufPtr) \
-		IX_OSAL_MBUF_POOL_PUT(bufPtr)
-
-
-#define IX_MBUF_POOL_PUT_CHAIN(bufPtr) \
-		IX_OSAL_MBUF_POOL_PUT_CHAIN(bufPtr)
-
-
-#define IX_MBUF_POOL_SHOW(poolPtr) \
-		IX_OSAL_MBUF_POOL_SHOW(poolPtr)
-
-
-#define IX_MBUF_POOL_MDATA_RESET(bufPtr) \
-		IX_OSAL_MBUF_POOL_MDATA_RESET(bufPtr)
-
-#endif /* IX_OSAL_BACKWARD_BUFFER_MGT_H */
diff --git a/drivers/net/npe/include/IxOsalBackwardCacheMMU.h b/drivers/net/npe/include/IxOsalBackwardCacheMMU.h
deleted file mode 100644
index d9e20c0..0000000
--- a/drivers/net/npe/include/IxOsalBackwardCacheMMU.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/** 
- * This file is intended to provide backward 
- * compatibility for main osService/OSSL 
- * APIs. 
- *
- * It shall be phased out gradually and users
- * are strongly recommended to use IX_OSAL API.
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IX_OSAL_BACKWARD_CACHE_MMU_H
-#define IX_OSAL_BACKWARD_CACHE_MMU_H
-
-#ifdef IX_OSAL_CACHED
-#define IX_ACC_CACHE_ENABLED
-#endif
-
-#define IX_XSCALE_CACHE_LINE_SIZE IX_OSAL_CACHE_LINE_SIZE
-
-#define IX_ACC_DRV_DMA_MALLOC(size) IX_OSAL_CACHE_DMA_MALLOC(size)
-
-#define IX_ACC_DRV_DMA_FREE(ptr,size) IX_OSAL_CACHE_DMA_FREE(ptr)
-
-#define IX_MMU_VIRTUAL_TO_PHYSICAL_TRANSLATION(addr) IX_OSAL_MMU_VIRT_TO_PHYS(addr)
-
-#define IX_MMU_PHYSICAL_TO_VIRTUAL_TRANSLATION(addr) IX_OSAL_MMU_PHYS_TO_VIRT(addr)
-
-#define IX_ACC_DATA_CACHE_INVALIDATE(addr,size) IX_OSAL_CACHE_INVALIDATE(addr, size)
-
-#define IX_ACC_DATA_CACHE_FLUSH(addr,size) IX_OSAL_CACHE_FLUSH(addr,size)
-
-#endif /* IX_OSAL_BACKWARD_CACHE_MMU_H */
diff --git a/drivers/net/npe/include/IxOsalBackwardMemMap.h b/drivers/net/npe/include/IxOsalBackwardMemMap.h
deleted file mode 100644
index 9b6cc72..0000000
--- a/drivers/net/npe/include/IxOsalBackwardMemMap.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/** 
- * This file is intended to provide backward 
- * compatibility for main osService/OSSL 
- * APIs. 
- *
- * It shall be phased out gradually and users
- * are strongly recommended to use IX_OSAL API.
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-#ifndef IX_OSAL_BACKWARD_MEM_MAP_H
-#define IX_OSAL_BACKWARD_MEM_MAP_H
-
-#include "IxOsal.h"
-
-#define IX_OSSERV_SWAP_LONG(wData) IX_OSAL_SWAP_LONG(wData)
-#define IX_OSSERV_SWAP_SHORT(sData) IX_OSAL_SWAP_SHORT(sData)
-
-#define IX_OSSERV_SWAP_SHORT_ADDRESS(sAddr) IX_OSAL_SWAP_SHORT_ADDRESS(sAddr)
-#define IX_OSSERV_SWAP_BYTE_ADDRESS(bAddr) IX_OSAL_SWAP_BYTE_ADDRESS(bAddr)
-
-#define IX_OSSERV_BE_XSTOBUSL(wData)  IX_OSAL_BE_XSTOBUSL(wData)
-#define IX_OSSERV_BE_XSTOBUSS(sData)  IX_OSAL_BE_XSTOBUSS(sData)
-#define IX_OSSERV_BE_XSTOBUSB(bData)  IX_OSAL_BE_XSTOBUSB(bData)
-#define IX_OSSERV_BE_BUSTOXSL(wData)  IX_OSAL_BE_BUSTOXSL(wData)
-#define IX_OSSERV_BE_BUSTOXSS(sData)  IX_OSAL_BE_BUSTOXSS(sData)
-#define IX_OSSERV_BE_BUSTOXSB(bData)  IX_OSAL_BE_BUSTOXSB(bData)
-
-#define IX_OSSERV_LE_AC_XSTOBUSL(wAddr) IX_OSAL_LE_AC_XSTOBUSL(wAddr)
-#define IX_OSSERV_LE_AC_XSTOBUSS(sAddr) IX_OSAL_LE_AC_XSTOBUSS(sAddr)
-#define IX_OSSERV_LE_AC_XSTOBUSB(bAddr) IX_OSAL_LE_AC_XSTOBUSB(bAddr)
-#define IX_OSSERV_LE_AC_BUSTOXSL(wAddr) IX_OSAL_LE_AC_BUSTOXSL(wAddr)
-#define IX_OSSERV_LE_AC_BUSTOXSS(sAddr) IX_OSAL_LE_AC_BUSTOXSS(sAddr)
-#define IX_OSSERV_LE_AC_BUSTOXSB(bAddr) IX_OSAL_LE_AC_BUSTOXSB(bAddr)
-
-#define IX_OSSERV_LE_DC_XSTOBUSL(wData) IX_OSAL_LE_DC_XSTOBUSL(wData)
-#define IX_OSSERV_LE_DC_XSTOBUSS(sData) IX_OSAL_LE_DC_XSTOBUSS(sData)
-#define IX_OSSERV_LE_DC_XSTOBUSB(bData) IX_OSAL_LE_DC_XSTOBUSB(bData)
-#define IX_OSSERV_LE_DC_BUSTOXSL(wData) IX_OSAL_LE_DC_BUSTOXSL(wData)
-#define IX_OSSERV_LE_DC_BUSTOXSS(sData) IX_OSAL_LE_DC_BUSTOXSS(sData)
-#define IX_OSSERV_LE_DC_BUSTOXSB(bData) IX_OSAL_LE_DC_BUSTOXSB(bData)
-
-#define IX_OSSERV_READ_LONG(wAddr)          IX_OSAL_READ_LONG(wAddr)
-#define IX_OSSERV_READ_SHORT(sAddr)         IX_OSAL_READ_SHORT(sAddr)
-#define IX_OSSERV_READ_BYTE(bAddr)          IX_OSAL_READ_BYTE(bAddr)
-#define IX_OSSERV_WRITE_LONG(wAddr, wData)  IX_OSAL_WRITE_LONG(wAddr, wData)
-#define IX_OSSERV_WRITE_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT(sAddr, sData)
-#define IX_OSSERV_WRITE_BYTE(bAddr, bData)  IX_OSAL_WRITE_BYTE(bAddr, bData)
-
-
-#define IX_OSSERV_READ_NPE_SHARED_LONG(wAddr)            IX_OSAL_READ_BE_SHARED_LONG(wAddr)
-#define IX_OSSERV_READ_NPE_SHARED_SHORT(sAddr)           IX_OSAL_READ_BE_SHARED_SHORT(sAddr)
-#define IX_OSSERV_WRITE_NPE_SHARED_LONG(wAddr, wData)    IX_OSAL_WRITE_BE_SHARED_LONG(wAddr, wData)
-#define IX_OSSERV_WRITE_NPE_SHARED_SHORT(sAddr, sData)   IX_OSAL_WRITE_BE_SHARED_SHORT(sAddr, sData)
-
-#define IX_OSSERV_SWAP_NPE_SHARED_LONG(wData)            IX_OSAL_SWAP_BE_SHARED_LONG(wData)
-#define IX_OSSERV_SWAP_NPE_SHARED_SHORT(sData)           IX_OSAL_SWAP_BE_SHARED_SHORT(sData)
-
-
-/* Map osServ address/size */
-#define IX_OSSERV_QMGR_MAP_SIZE			IX_OSAL_IXP400_QMGR_MAP_SIZE
-#define IX_OSSERV_EXP_REG_MAP_SIZE		IX_OSAL_IXP400_EXP_REG_MAP_SIZE
-#define IX_OSSERV_UART1_MAP_SIZE		IX_OSAL_IXP400_UART1_MAP_SIZE
-#define IX_OSSERV_UART2_MAP_SIZE		IX_OSAL_IXP400_UART2_MAP_SIZE
-#define IX_OSSERV_PMU_MAP_SIZE			IX_OSAL_IXP400_PMU_MAP_SIZE
-#define IX_OSSERV_OSTS_MAP_SIZE			IX_OSAL_IXP400_OSTS_MAP_SIZE
-#define IX_OSSERV_NPEA_MAP_SIZE			IX_OSAL_IXP400_NPEA_MAP_SIZE
-#define IX_OSSERV_NPEB_MAP_SIZE			IX_OSAL_IXP400_NPEB_MAP_SIZE
-#define IX_OSSERV_NPEC_MAP_SIZE			IX_OSAL_IXP400_NPEC_MAP_SIZE
-#define IX_OSSERV_ETHA_MAP_SIZE			IX_OSAL_IXP400_ETHA_MAP_SIZE
-#define IX_OSSERV_ETHB_MAP_SIZE			IX_OSAL_IXP400_ETHB_MAP_SIZE
-#define IX_OSSERV_USB_MAP_SIZE			IX_OSAL_IXP400_USB_MAP_SIZE
-#define IX_OSSERV_GPIO_MAP_SIZE			IX_OSAL_IXP400_GPIO_MAP_SIZE
-#define IX_OSSERV_EXP_BUS_MAP_SIZE		IX_OSAL_IXP400_EXP_BUS_MAP_SIZE
-#define IX_OSSERV_EXP_BUS_CS0_MAP_SIZE	IX_OSAL_IXP400_EXP_BUS_CS0_MAP_SIZE
-#define IX_OSSERV_EXP_BUS_CS1_MAP_SIZE	IX_OSAL_IXP400_EXP_BUS_CS1_MAP_SIZE
-#define IX_OSSERV_EXP_BUS_CS4_MAP_SIZE	IX_OSAL_IXP400_EXP_BUS_CS4_MAP_SIZE
-
-
-#define IX_OSSERV_GPIO_PHYS_BASE			IX_OSAL_IXP400_GPIO_PHYS_BASE
-#define IX_OSSERV_UART1_PHYS_BASE			IX_OSAL_IXP400_UART1_PHYS_BASE
-#define IX_OSSERV_UART2_PHYS_BASE			IX_OSAL_IXP400_UART2_PHYS_BASE
-#define IX_OSSERV_ETHA_PHYS_BASE			IX_OSAL_IXP400_ETHA_PHYS_BASE
-#define IX_OSSERV_ETHB_PHYS_BASE			IX_OSAL_IXP400_ETHB_PHYS_BASE
-#define IX_OSSERV_NPEA_PHYS_BASE			IX_OSAL_IXP400_NPEA_PHYS_BASE
-#define IX_OSSERV_NPEB_PHYS_BASE			IX_OSAL_IXP400_NPEB_PHYS_BASE
-#define IX_OSSERV_NPEC_PHYS_BASE			IX_OSAL_IXP400_NPEC_PHYS_BASE
-#define IX_OSSERV_PERIPHERAL_PHYS_BASE		IX_OSAL_IXP400_PERIPHERAL_PHYS_BASE
-#define IX_OSSERV_QMGR_PHYS_BASE			IX_OSAL_IXP400_QMGR_PHYS_BASE
-#define IX_OSSERV_OSTS_PHYS_BASE			IX_OSAL_IXP400_OSTS_PHYS_BASE
-#define IX_OSSERV_USB_PHYS_BASE				IX_OSAL_IXP400_USB_PHYS_BASE
-#define IX_OSSERV_EXP_BUS_PHYS_BASE			IX_OSAL_IXP400_EXP_BUS_PHYS_BASE
-#define IX_OSSERV_EXP_BUS_BOOT_PHYS_BASE	IX_OSAL_IXP400_EXP_BUS_BOOT_PHYS_BASE
-#define IX_OSSERV_EXP_BUS_CS0_PHYS_BASE		IX_OSAL_IXP400_EXP_BUS_CS0_PHYS_BASE
-#define IX_OSSERV_EXP_BUS_CS1_PHYS_BASE		IX_OSAL_IXP400_EXP_BUS_CS1_PHYS_BASE
-#define IX_OSSERV_EXP_BUS_CS4_PHYS_BASE		IX_OSAL_IXP400_EXP_BUS_CS4_PHYS_BASE
-#define IX_OSSERV_EXP_BUS_REGS_PHYS_BASE	IX_OSAL_IXP400_EXP_BUS_REGS_PHYS_BASE
-
-#define IX_OSSERV_MEM_MAP(physAddr, size)		IX_OSAL_MEM_MAP(physAddr, size)
-
-#define IX_OSSERV_MEM_UNMAP(virtAddr)			IX_OSAL_MEM_UNMAP(virtAddr)
-
-#endif /* IX_OSAL_BACKWARD_MEM_MAP_H */
diff --git a/drivers/net/npe/include/IxOsalBackwardOsServices.h b/drivers/net/npe/include/IxOsalBackwardOsServices.h
deleted file mode 100644
index 761779d..0000000
--- a/drivers/net/npe/include/IxOsalBackwardOsServices.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/** 
- * This file is intended to provide backward 
- * compatibility for main osService/OSSL 
- * APIs. 
- *
- * It shall be phased out gradually and users
- * are strongly recommended to use IX_OSAL API.
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IX_OSAL_BACKWARD_OSSERVICES_H
-#define IX_OSAL_BACKWARD_OSSERVICES_H
-
-#ifndef __vxworks
-typedef UINT32 IX_IRQ_STATUS;
-#else
-typedef int IX_IRQ_STATUS;
-#endif
-
-typedef IxOsalMutex IxMutex;
-
-typedef IxOsalFastMutex IxFastMutex;
-
-typedef IxOsalVoidFnVoidPtr IxVoidFnVoidPtr;
-
-typedef IxOsalVoidFnPtr IxVoidFnPtr;
-
-
-#define LOG_NONE 	IX_OSAL_LOG_LVL_NONE
-#define LOG_USER 	IX_OSAL_LOG_LVL_USER
-#define LOG_FATAL 	IX_OSAL_LOG_LVL_FATAL
-#define LOG_ERROR  	IX_OSAL_LOG_LVL_ERROR
-#define LOG_WARNING	IX_OSAL_LOG_LVL_WARNING
-#define LOG_MESSAGE	IX_OSAL_LOG_LVL_MESSAGE
-#define LOG_DEBUG1  IX_OSAL_LOG_LVL_DEBUG1
-#define LOG_DEBUG2	IX_OSAL_LOG_LVL_DEBUG2
-#define LOG_DEBUG3 	IX_OSAL_LOG_LVL_DEBUG3
-#ifndef __vxworks
-#define LOG_ALL 	IX_OSAL_LOG_LVL_ALL
-#endif
-
-PUBLIC IX_STATUS
-ixOsServIntBind (int level, void (*routine) (void *), void *parameter);
-
-PUBLIC IX_STATUS ixOsServIntUnbind (int level);
-
-
-PUBLIC int ixOsServIntLock (void);
-
-PUBLIC void ixOsServIntUnlock (int lockKey);
-
-
-PUBLIC int ixOsServIntLevelSet (int level);
-
-PUBLIC IX_STATUS ixOsServMutexInit (IxMutex * mutex);
-
-PUBLIC IX_STATUS ixOsServMutexLock (IxMutex * mutex);
-
-PUBLIC IX_STATUS ixOsServMutexUnlock (IxMutex * mutex);
-
-PUBLIC IX_STATUS ixOsServMutexDestroy (IxMutex * mutex);
-
-PUBLIC IX_STATUS ixOsServFastMutexInit (IxFastMutex * mutex);
-
-PUBLIC IX_STATUS ixOsServFastMutexTryLock (IxFastMutex * mutex);
-
-PUBLIC IX_STATUS ixOsServFastMutexUnlock (IxFastMutex * mutex);
-
-PUBLIC int
-ixOsServLog (int level, char *format, int arg1, int arg2, int arg3, int arg4,
-	     int arg5, int arg6);
-
-
-PUBLIC int ixOsServLogLevelSet (int level);
-
-PUBLIC void ixOsServSleep (int microseconds);
-
-PUBLIC void ixOsServTaskSleep (int milliseconds);
-
-PUBLIC unsigned int ixOsServTimestampGet (void);
-
-
-PUBLIC void ixOsServUnload (void);
-
-PUBLIC void ixOsServYield (void);
-
-#endif
-/* IX_OSAL_BACKWARD_OSSERVICES_H */
diff --git a/drivers/net/npe/include/IxOsalBackwardOssl.h b/drivers/net/npe/include/IxOsalBackwardOssl.h
deleted file mode 100644
index c9deb54..0000000
--- a/drivers/net/npe/include/IxOsalBackwardOssl.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/** 
- * This file is intended to provide backward 
- * compatibility for main osService/OSSL 
- * APIs. 
- *
- * It shall be phased out gradually and users
- * are strongly recommended to use IX_OSAL API.
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IX_OSAL_BACKWARD_OSSL_H
-#define IX_OSAL_BACKWARD_OSSL_H
-
-
-typedef IxOsalThread ix_ossl_thread_t;
-
-typedef IxOsalSemaphore ix_ossl_sem_t;
-
-typedef IxOsalMutex ix_ossl_mutex_t;
-
-typedef IxOsalTimeval ix_ossl_time_t;
-
-
-/* Map sub-fields for ix_ossl_time_t */
-#define tv_sec secs
-#define tv_nec nsecs
-
-
-typedef IX_STATUS ix_error;
-
-typedef UINT32 ix_ossl_thread_priority;
-
-typedef UINT32 ix_uint32;
-
-
-#define IX_OSSL_ERROR_SUCCESS IX_SUCCESS
-
-#define IX_ERROR_SUCCESS IX_SUCCESS
-
-
-typedef enum
-{
-    IX_OSSL_SEM_UNAVAILABLE = 0,
-    IX_OSSL_SEM_AVAILABLE
-} ix_ossl_sem_state;
-
-
-typedef enum
-{
-    IX_OSSL_MUTEX_UNLOCK = 0,
-    IX_OSSL_MUTEX_LOCK
-} ix_ossl_mutex_state;
-
-
-typedef IxOsalVoidFnVoidPtr ix_ossl_thread_entry_point_t;
-
-
-#define	IX_OSSL_THREAD_PRI_HIGH 	90
-#define IX_OSSL_THREAD_PRI_MEDIUM 	160
-#define IX_OSSL_THREAD_PRI_LOW 		240
-
-
-#define IX_OSSL_WAIT_FOREVER    IX_OSAL_WAIT_FOREVER
-
-#define IX_OSSL_WAIT_NONE       IX_OSAL_WAIT_NONE
-
-#define BILLION  IX_OSAL_BILLION
-
-#define IX_OSSL_TIME_EQ(a,b)  IX_OSAL_TIME_EQ(a,b)
-
-#define IX_OSSL_TIME_GT(a,b)  IX_OSAL_TIME_GT(a,b)
-
-#define IX_OSSL_TIME_LT(a,b)  IX_OSAL_TIME_LT(a,b)
-
-#define IX_OSSL_TIME_ADD(a,b)  IX_OSAL_TIME_ADD(a,b)
-
-#define IX_OSSL_TIME_SUB(a,b)  IX_OSAL_TIME_SUB(a,b)
-
-
-/* a is tick, b is timeval */
-#define IX_OSSL_TIME_CONVERT_TO_TICK(a,b)  \
-		 (a) = IX_OSAL_TIMEVAL_TO_TICKS(b)
-
-
-
-
-PUBLIC IX_STATUS
-ixOsalOsIxp400BackwardOsslThreadCreate (IxOsalVoidFnVoidPtr entryPoint,
-					void *arg, IxOsalThread * ptrThread);
-
-#define ix_ossl_thread_create(entryPoint, arg, ptrTid) \
-		ixOsalOsIxp400BackwardOsslThreadCreate(entryPoint, arg, ptrTid)
-
-
-/* void ix_ossl_thread_exit(ix_error retError, void* retObj) */
-#define ix_ossl_thread_exit(retError, retObj)   \
-		ixOsalThreadExit()
-
-
-PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslThreadKill (IxOsalThread tid);
-
-/* ix_error ix_ossl_thread_kill(tid) */
-#define ix_ossl_thread_kill(tid) \
-		ixOsalOsIxp400BackwardOsslThreadKill(tid)
-
-
-PUBLIC IX_STATUS
-ixOsalOsIxp400BackwardOsslThreadSetPriority (IxOsalThread tid,
-					     UINT32 priority);
-
-
-/* 
- * ix_error ix_ossl_thread_set_priority(ix_ossl_thread_t tid,
- *                             ix_ossl_thread_priority priority
- *                             ); 
- */
-
-#define ix_ossl_thread_set_priority(tid, priority) \
-		ixOsalOsIxp400BackwardOsslThreadSetPriority(tid, priority)
-
-
-PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslTickGet (int *pticks);
-
-#define ix_ossl_tick_get(pticks) \
-		ixOsalOsIxp400BackwardOsslTickGet(pticks)
-
-PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslThreadDelay (int ticks);
-
-#define ix_ossl_thread_delay(ticks) ixOsalOsIxp400BackwardOsslThreadDelay(ticks)
-
-
-
-/* ix_error ix_ossl_sem_init(int start_value, ix_ossl_sem_t* sid); */
-/* Note sid is a pointer to semaphore */
-#define ix_ossl_sem_init(value, sid) \
-		ixOsalSemaphoreInit(sid, value)
-
-
-PUBLIC IX_STATUS
-ixOsalOsIxp400BackwardOsslSemaphoreWait (IxOsalSemaphore semaphore,
-					 INT32 timeout);
-
-
-/*
-ix_error ix_ossl_sem_take(
-                          ix_ossl_sem_t sid,
-                          ix_uint32 timeout
-                         );
-*/
-
-#define ix_ossl_sem_take( sid, timeout) \
-		ixOsalOsIxp400BackwardOsslSemaphoreWait(sid, timeout)
-
-
-
-PUBLIC IX_STATUS
-ixOsalOsIxp400BackwardOsslSemaphorePost (IxOsalSemaphore sid);
-
-/*ix_error ix_ossl_sem_give(ix_ossl_sem_t sid); */
-#define ix_ossl_sem_give(sid) \
-		ixOsalOsIxp400BackwardOsslSemaphorePost(sid);
-
-
-PUBLIC IX_STATUS ixOsalOsIxp400BackwardSemaphoreDestroy (IxOsalSemaphore sid);
-
-#define ix_ossl_sem_fini(sid) \
-		ixOsalOsIxp400BackwardSemaphoreDestroy(sid)
-
-
-PUBLIC IX_STATUS
-ixOsalOsIxp400BackwardOsslMutexInit (ix_ossl_mutex_state start_state,
-				     IxOsalMutex * pMutex);
-
-
-/* ix_error ix_ossl_mutex_init(ix_ossl_mutex_state start_state, ix_ossl_mutex_t* mid); */
-#define ix_ossl_mutex_init(start_state, pMutex) \
-		ixOsalOsIxp400BackwardOsslMutexInit(start_state, pMutex)
-
-
-PUBLIC IX_STATUS
-ixOsalOsIxp400BackwardOsslMutexLock (IxOsalMutex mid, INT32 timeout);
-
-/*
-ix_error ix_ossl_mutex_lock(
-                            ix_ossl_mutex_t mid, 
-                            ix_uint32 timeout
-                           );
-*/
-#define ix_ossl_mutex_lock(mid, timeout) \
-		ixOsalOsIxp400BackwardOsslMutexLock(mid, timout)
-
-
-PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslMutexUnlock (IxOsalMutex mid);
-
-/* ix_error ix_ossl_mutex_unlock(ix_ossl_mutex_t mid); */
-#define ix_ossl_mutex_unlock(mid) \
-		ixOsalOsIxp400BackwardOsslMutexUnlock(mid)
-
-PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslMutexDestroy (IxOsalMutex mid);
-
-#define ix_ossl_mutex_fini(mid) \
-		ixOsalOsIxp400BackwardOsslMutexDestroy(mid);
-
-#define ix_ossl_sleep(sleeptime_ms) \
-		ixOsalSleep(sleeptime_ms)
-
-PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslSleepTick (UINT32 ticks);
-
-#define ix_ossl_sleep_tick(sleeptime_ticks) \
-		ixOsalOsIxp400BackwardOsslSleepTick(sleeptime_ticks)
-
-
-PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslTimeGet (IxOsalTimeval * pTv);
-
-#define ix_ossl_time_get(pTv)    \
-		ixOsalOsIxp400BackwardOsslTimeGet(pTv)
-
-
-typedef UINT32 ix_ossl_size_t;
-
-#define ix_ossl_malloc(arg_size) \
-		ixOsalMemAlloc(arg_size)
-
-#define ix_ossl_free(arg_pMemory) \
-		ixOsalMemFree(arg_pMemory)
-
-
-#define ix_ossl_memcpy(arg_pDest, arg_pSrc,arg_Count) \
-		ixOsalMemCopy(arg_pDest, arg_pSrc,arg_Count)
-
-#define ix_ossl_memset(arg_pDest, arg_pChar, arg_Count) \
-		ixOsalMemSet(arg_pDest, arg_pChar, arg_Count)
-
-
-#endif /* IX_OSAL_BACKWARD_OSSL_H */
diff --git a/drivers/net/npe/include/IxOsalBufferMgt.h b/drivers/net/npe/include/IxOsalBufferMgt.h
deleted file mode 100644
index 1f9e373..0000000
--- a/drivers/net/npe/include/IxOsalBufferMgt.h
+++ /dev/null
@@ -1,570 +0,0 @@
-/**
- * @file IxOsalBufferMgt.h
- *
- * @brief OSAL Buffer pool management and buffer management definitions.
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-/* @par
- * -- Copyright Notice --
- *
- * @par
- * Copyright 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 
- *      The Regents of the University of California. All rights reserved.
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsalBufferMgt_H
-#define IxOsalBufferMgt_H
-
-#include "IxOsal.h"
-/**
- * @defgroup IxOsalBufferMgt OSAL Buffer Management Module.
- *
- * @brief Buffer management module for IxOsal
- *
- * @{ 
- */
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_MAX_POOLS
- *
- * @brief The maximum number of pools that can be allocated, must be 
- *        a multiple of 32 as required by implementation logic.
- * @note  This can safely be increased if more pools are required.
- */
-#define IX_OSAL_MBUF_MAX_POOLS      32
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_NAME_LEN
- *
- * @brief The maximum string length of the pool name
- */
-#define IX_OSAL_MBUF_POOL_NAME_LEN  64
-
-
-
-/**
- *  Define IX_OSAL_MBUF
- */
-
-
-/* forward declaration of internal structure */
-struct __IXP_BUF;
-
-/* 
- * OS can define it in IxOsalOs.h to skip the following
- * definition.
- */
-#ifndef IX_OSAL_ATTRIBUTE_ALIGN32
-#define IX_OSAL_ATTRIBUTE_ALIGN32 __attribute__ ((aligned(32)))
-#endif
-
-/* release v1.4 backward compatible definitions */
-struct __IX_MBUF
-{
-    struct __IXP_BUF *ix_next IX_OSAL_ATTRIBUTE_ALIGN32;
-    struct __IXP_BUF *ix_nextPacket;
-    UINT8 *ix_data;
-    UINT32 ix_len;  
-    unsigned char ix_type;
-    unsigned char ix_flags;
-    unsigned short ix_reserved;
-    UINT32 ix_rsvd;
-    UINT32 ix_PktLen; 
-    void *ix_priv;     
-};
-
-struct __IX_CTRL
-{
-    UINT32 ix_reserved[2];        /**< Reserved field */
-    UINT32 ix_signature;          /**< Field to indicate if buffers are allocated by the system */    
-    UINT32 ix_allocated_len;      /**< Allocated buffer length */  
-    UINT32 ix_allocated_data;     /**< Allocated buffer data pointer */  
-    void *ix_pool;                /**< pointer to the buffer pool */
-    struct __IXP_BUF *ix_chain;   /**< chaining */ 
-    void *ix_osbuf_ptr;           /**< Storage for OS-specific buffer pointer */
-};
-
-struct __IX_NE_SHARED
-{
-    UINT32 reserved[8] IX_OSAL_ATTRIBUTE_ALIGN32;   /**< Reserved area for NPE Service-specific usage */
-};
-
-
-/* 
- * IXP buffer structure 
- */
-typedef struct __IXP_BUF
-{
-    struct __IX_MBUF ix_mbuf IX_OSAL_ATTRIBUTE_ALIGN32; /**< buffer header */
-    struct __IX_CTRL ix_ctrl;                           /**< buffer management */
-    struct __IX_NE_SHARED ix_ne;                        /**< Reserved area for NPE Service-specific usage*/
-} IXP_BUF;
-
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def typedef IX_OSAL_MBUF
- *
- * @brief Generic IXP mbuf format.
- */
-typedef IXP_BUF IX_OSAL_MBUF;
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_IXP_NEXT_BUFFER_IN_PKT_PTR(m_blk_ptr)
- *
- * @brief Return pointer to the next mbuf in a single packet
- */
-#define IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(m_blk_ptr)  \
-        (m_blk_ptr)->ix_mbuf.ix_next
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m_blk_ptr)
- *
- * @brief Return pointer to the next packet in the chain
- */
-#define IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m_blk_ptr)  \
-        (m_blk_ptr)->ix_mbuf.ix_nextPacket
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_MDATA(m_blk_ptr)
- *
- * @brief Return pointer to the data in the mbuf
- */
-#define IX_OSAL_MBUF_MDATA(m_blk_ptr)       (m_blk_ptr)->ix_mbuf.ix_data
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_MLEN(m_blk_ptr)
- *
- * @brief Return the data length
- */
-#define IX_OSAL_MBUF_MLEN(m_blk_ptr) \
-    (m_blk_ptr)->ix_mbuf.ix_len
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_MTYPE(m_blk_ptr)
- *
- * @brief Return the data type in the mbuf
- */
-#define IX_OSAL_MBUF_MTYPE(m_blk_ptr) \
-    (m_blk_ptr)->ix_mbuf.ix_type
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_FLAGS(m_blk_ptr)
- *
- * @brief Return the buffer flags
- */
-#define IX_OSAL_MBUF_FLAGS(m_blk_ptr)       \
-        (m_blk_ptr)->ix_mbuf.ix_flags
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_NET_POOL(m_blk_ptr)
- *
- * @brief Return pointer to a network pool
- */
-#define IX_OSAL_MBUF_NET_POOL(m_blk_ptr)	\
-        (m_blk_ptr)->ix_ctrl.ix_pool
-
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_PKT_LEN(m_blk_ptr)
- *
- * @brief Return the total length of all the data in
- * the mbuf chain for this packet
- */
-#define IX_OSAL_MBUF_PKT_LEN(m_blk_ptr) \
-        (m_blk_ptr)->ix_mbuf.ix_PktLen
-
-
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_PRIV(m_blk_ptr)
- *
- * @brief Return the private field
- */
-#define IX_OSAL_MBUF_PRIV(m_blk_ptr)        \
-        (m_blk_ptr)->ix_mbuf.ix_priv
-
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_SIGNATURE(m_blk_ptr)
- *
- * @brief Return the signature field of IX_OSAL_MBUF
- */
-#define IX_OSAL_MBUF_SIGNATURE(m_blk_ptr)  \
-        (m_blk_ptr)->ix_ctrl.ix_signature
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_OSBUF_PTR(m_blk_ptr)
- *
- * @brief Return ix_osbuf_ptr field of IX_OSAL_MBUF, which is used to store OS-specific buffer pointer during a buffer conversion.
- */
-#define IX_OSAL_MBUF_OSBUF_PTR(m_blk_ptr)  \
-        (m_blk_ptr)->ix_ctrl.ix_osbuf_ptr
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(m_blk_ptr)
- *
- * @brief Return the allocated buffer size
- */
-#define IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(m_blk_ptr)  \
-        (m_blk_ptr)->ix_ctrl.ix_allocated_len
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(m_blk_ptr)
- *
- * @brief Return the allocated buffer pointer
- */
-#define IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(m_blk_ptr)  \
-        (m_blk_ptr)->ix_ctrl.ix_allocated_data
-
-
-
-/* Name length */
-#define IX_OSAL_MBUF_POOL_NAME_LEN  64
-
-
-/****************************************************
- * Macros for buffer pool management
- ****************************************************/
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_FREE_COUNT(m_pool_ptr
- *
- * @brief Return the total number of freed buffers left in the pool.
- */
-#define IX_OSAL_MBUF_POOL_FREE_COUNT(m_pool_ptr) \
-                    ixOsalBuffPoolFreeCountGet(m_pool_ptr)
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_SIZE_ALIGN
- *
- * @brief This macro takes an integer as an argument and
- * rounds it up to be a multiple of the memory cache-line 
- * size.
- *
- * @param int [in] size - the size integer to be rounded up
- *
- * @return int - the size, rounded up to a multiple of
- *               the cache-line size
- */
-#define IX_OSAL_MBUF_POOL_SIZE_ALIGN(size)                 \
-    ((((size) + (IX_OSAL_CACHE_LINE_SIZE - 1)) /      \
-        IX_OSAL_CACHE_LINE_SIZE) *                  \
-            IX_OSAL_CACHE_LINE_SIZE)
-
-/* Don't use this directly, use macro */
-PUBLIC UINT32 ixOsalBuffPoolMbufAreaSizeGet (int count);
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_MBUF_AREA_SIZE_ALIGNED
- *
- * @brief This macro calculates, from the number of mbufs required, the 
- * size of the memory area required to contain the mbuf headers for the
- * buffers in the pool.  The size to be used for each mbuf header is 
- * rounded up to a multiple of the cache-line size, to ensure
- * each mbuf header aligns on a cache-line boundary.
- * This macro is used by IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC()
- *
- * @param int [in] count - the number of buffers the pool will contain
- *
- * @return int - the total size required for the pool mbuf area (aligned)
- */
-#define IX_OSAL_MBUF_POOL_MBUF_AREA_SIZE_ALIGNED(count) \
-        ixOsalBuffPoolMbufAreaSizeGet(count)
-
-
-/* Don't use this directly, use macro */
-PUBLIC UINT32 ixOsalBuffPoolDataAreaSizeGet (int count, int size);
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_DATA_AREA_SIZE_ALIGNED
- *
- * @brief This macro calculates, from the number of mbufs required and the
- * size of the data portion for each mbuf, the size of the data memory area
- * required. The size is adjusted to ensure alignment on cache line boundaries.
- * This macro is used by IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC()
- *
- *
- * @param int [in] count - The number of mbufs in the pool.
- * @param int [in] size  - The desired size for each mbuf data portion.
- *                         This size will be rounded up to a multiple of the
- *                         cache-line size to ensure alignment on cache-line
- *                         boundaries for each data block.
- *
- * @return int - the total size required for the pool data area (aligned)
- */
-#define IX_OSAL_MBUF_POOL_DATA_AREA_SIZE_ALIGNED(count, size) \
-        ixOsalBuffPoolDataAreaSizeGet((count), (size))
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC
- *
- * @brief Allocates the memory area needed for the number of mbuf headers
- * specified by <i>count</i>.
- * This macro ensures the mbuf headers align on cache line boundaries.
- * This macro evaluates to a pointer to the memory allocated.
- *
- * @param int [in] count - the number of mbufs the pool will contain
- * @param int [out] memAreaSize - the total amount of memory allocated
- *
- * @return void * - a pointer to the allocated memory area
- */
-#define IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC(count, memAreaSize) \
-    IX_OSAL_CACHE_DMA_MALLOC((memAreaSize =                 \
-        IX_OSAL_MBUF_POOL_MBUF_AREA_SIZE_ALIGNED(count)))
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC
- *
- * @brief Allocates the memory pool for the data portion of the pool mbufs.
- * The number of mbufs is specified by <i>count</i>.  The size of the data
- * portion of each mbuf is specified by <i>size</i>.
- * This macro ensures the mbufs are aligned on cache line boundaries
- * This macro evaluates to a pointer to the memory allocated.
- *
- * @param int [in] count - the number of mbufs the pool will contain
- * @param int [in] size - the desired size (in bytes) required for the data
- *                        portion of each mbuf.  Note that this size may be
- *                        rounded up to ensure alignment on cache-line
- *                        boundaries.
- * @param int [out] memAreaSize - the total amount of memory allocated
- *
- * @return void * - a pointer to the allocated memory area
- */
-#define IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC(count, size, memAreaSize) \
-    IX_OSAL_CACHE_DMA_MALLOC((memAreaSize =                     \
-        IX_OSAL_MBUF_POOL_DATA_AREA_SIZE_ALIGNED(count,size)))
-
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_INIT
- *
- * @brief Wrapper macro for ixOsalPoolInit() 
- * See function description below for details.
- */
-#define IX_OSAL_MBUF_POOL_INIT(count, size, name) \
-    ixOsalPoolInit((count), (size), (name))
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_NO_ALLOC_POOL_INIT
- *
- * @return Pointer to the new pool or NULL if the initialization failed.
- *
- * @brief Wrapper macro for ixOsalNoAllocPoolInit() 
- * See function description below for details.
- * 
- */
-#define IX_OSAL_MBUF_NO_ALLOC_POOL_INIT(bufPtr, dataPtr, count, size, name) \
-    ixOsalNoAllocPoolInit( (bufPtr), (dataPtr), (count), (size), (name))
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_GET
- *
- * @brief Wrapper macro for ixOsalMbufAlloc() 
- * See function description below for details.
- */
-#define IX_OSAL_MBUF_POOL_GET(poolPtr) \
-        ixOsalMbufAlloc(poolPtr)
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_PUT
- *
- * @brief Wrapper macro for ixOsalMbufFree() 
- * See function description below for details.
- */
-#define IX_OSAL_MBUF_POOL_PUT(bufPtr) \
-    ixOsalMbufFree(bufPtr)
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_PUT_CHAIN
- *
- * @brief Wrapper macro for ixOsalMbufChainFree() 
- * See function description below for details.
- */
-#define IX_OSAL_MBUF_POOL_PUT_CHAIN(bufPtr) \
-    ixOsalMbufChainFree(bufPtr)
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_SHOW
- *
- * @brief Wrapper macro for ixOsalMbufPoolShow() 
- * See function description below for details.
- */
-#define IX_OSAL_MBUF_POOL_SHOW(poolPtr) \
-    ixOsalMbufPoolShow(poolPtr)
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_MDATA_RESET
- *
- * @brief Wrapper macro for ixOsalMbufDataPtrReset() 
- * See function description below for details.
- */
-#define IX_OSAL_MBUF_POOL_MDATA_RESET(bufPtr) \
-    ixOsalMbufDataPtrReset(bufPtr)
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_MBUF_POOL_UNINIT
- *
- * @brief Wrapper macro for ixOsalBuffPoolUninit() 
- * See function description below for details.
- */
-#define IX_OSAL_MBUF_POOL_UNINIT(m_pool_ptr)  \
-        ixOsalBuffPoolUninit(m_pool_ptr)
-
-/* 
- * Include OS-specific bufferMgt definitions 
- */
-#include "IxOsalOsBufferMgt.h"
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_CONVERT_OSBUF_TO_IXPBUF( osBufPtr, ixpBufPtr)
- *
- * @brief Convert pre-allocated os-specific buffer format to OSAL IXP_BUF (IX_OSAL_MBUF) format. 
- * It is users' responsibility to provide pre-allocated and valid buffer pointers.
- * @param osBufPtr (in) - a pre-allocated os-specific buffer pointer.
- * @param ixpBufPtr (in)- a pre-allocated OSAL IXP_BUF pointer
- * @return None
- */
-#define IX_OSAL_CONVERT_OSBUF_TO_IXPBUF( osBufPtr, ixpBufPtr) \
-        IX_OSAL_OS_CONVERT_OSBUF_TO_IXPBUF( osBufPtr, ixpBufPtr)        
-
-
-/**
- * @ingroup IxOsalBufferMgt
- *
- * @def IX_OSAL_CONVERT_IXPBUF_TO_OSBUF( ixpBufPtr, osBufPtr)
- *
- * @brief Convert pre-allocated OSAL IXP_BUF (IX_OSAL_MBUF) format to os-specific buffer pointers.
- * @param ixpBufPtr (in) - OSAL IXP_BUF pointer
- * @param osBufPtr (out) - os-specific buffer pointer.
- * @return None
- */
-
-#define IX_OSAL_CONVERT_IXPBUF_TO_OSBUF( ixpBufPtr, osBufPtr)  \
-        IX_OSAL_OS_CONVERT_IXPBUF_TO_OSBUF( ixpBufPtr, osBufPtr)
-
-
-PUBLIC IX_OSAL_MBUF_POOL *ixOsalPoolInit (UINT32 count,
-                      UINT32 size, const char *name);
-
-PUBLIC IX_OSAL_MBUF_POOL *ixOsalNoAllocPoolInit (void *poolBufPtr,
-                         void *poolDataPtr,
-						 UINT32 count,
-						 UINT32 size,
-						 const char *name);
-
-PUBLIC IX_OSAL_MBUF *ixOsalMbufAlloc (IX_OSAL_MBUF_POOL * pool);
-
-PUBLIC IX_OSAL_MBUF *ixOsalMbufFree (IX_OSAL_MBUF * mbuf);
-
-PUBLIC void ixOsalMbufChainFree (IX_OSAL_MBUF * mbuf);
-
-PUBLIC void ixOsalMbufDataPtrReset (IX_OSAL_MBUF * mbuf);
-
-PUBLIC void ixOsalMbufPoolShow (IX_OSAL_MBUF_POOL * pool);
-
-PUBLIC IX_STATUS ixOsalBuffPoolUninit (IX_OSAL_MBUF_POOL * pool);
-
-PUBLIC UINT32 ixOsalBuffPoolFreeCountGet(IX_OSAL_MBUF_POOL * pool);
-
-
-/**
- * @} IxOsalBufferMgt
- */
-
-
-#endif /* IxOsalBufferMgt_H */
diff --git a/drivers/net/npe/include/IxOsalBufferMgtDefault.h b/drivers/net/npe/include/IxOsalBufferMgtDefault.h
deleted file mode 100644
index 376c498..0000000
--- a/drivers/net/npe/include/IxOsalBufferMgtDefault.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/**
- * @file IxOsalBufferMgtDefault.h
- *
- * @brief Default buffer pool management and buffer management
- *        definitions.
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IX_OSAL_BUFFER_MGT_DEFAULT_H
-#define IX_OSAL_BUFFER_MGT_DEFAULT_H
-
-/**
- * @enum IxMbufPoolAllocationType
- * @brief Used to indicate how the pool memory was allocated
- */
-
-typedef enum
-{
-    IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC = 0, /**< mbuf pool allocated by the system */
-    IX_OSAL_MBUF_POOL_TYPE_USER_ALLOC	 /**< mbuf pool allocated by the user */
-} IxOsalMbufPoolAllocationType;
-
-
-/**
- * @brief Implementation of buffer pool structure for use with non-VxWorks OS
- */
-
-typedef struct
-{
-    IX_OSAL_MBUF *nextFreeBuf;	/**< Pointer to the next free mbuf              */
-    void *mbufMemPtr;	   /**< Pointer to the mbuf memory area            */
-    void *dataMemPtr;	   /**< Pointer to the data memory area            */
-    int bufDataSize;	   /**< The size of the data portion of each mbuf  */
-    int totalBufsInPool;   /**< Total number of mbufs in the pool          */
-    int freeBufsInPool;	   /**< Number of free mbufs currently in the pool */
-    int mbufMemSize;	   /**< The size of the pool mbuf memory area      */
-    int dataMemSize;	   /**< The size of the pool data memory area      */
-    char name[IX_OSAL_MBUF_POOL_NAME_LEN + 1];	 /**< Descriptive name for pool */
-    IxOsalMbufPoolAllocationType poolAllocType;
-    unsigned int poolIdx;  /**< Pool Index */ 
-} IxOsalMbufPool;
-
-typedef IxOsalMbufPool IX_OSAL_MBUF_POOL;
-
-
-PUBLIC IX_STATUS ixOsalBuffPoolUninit (IX_OSAL_MBUF_POOL * pool);
-
-
-#endif /* IX_OSAL_BUFFER_MGT_DEFAULT_H */
diff --git a/drivers/net/npe/include/IxOsalConfig.h b/drivers/net/npe/include/IxOsalConfig.h
deleted file mode 100644
index 81449f1..0000000
--- a/drivers/net/npe/include/IxOsalConfig.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/**
- * @file  IxOsalConfig.h
- *
- * @brief OSAL Configuration header file
- * 
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/* 
- * This file contains user-editable fields for modules inclusion.
- */
-#ifndef IxOsalConfig_H
-#define IxOsalConfig_H
-
-
-/*
- * Note: in the future these config options may
- * become build time decision. 
- */
-
-/* Choose cache */
-#define IX_OSAL_CACHED
-/* #define IX_OSAL_UNCACHED */
-
-
-/*
- * Select the module headers to include
- */
-#include "IxOsalIoMem.h"	/* I/O Memory Management module API */
-#include "IxOsalBufferMgt.h"	/* Buffer Management module API */
-
-/*
- * Select main platform header file to use
- */
-#include "IxOsalOem.h"
-
-
-
-#endif /* IxOsalConfig_H */
diff --git a/drivers/net/npe/include/IxOsalEndianess.h b/drivers/net/npe/include/IxOsalEndianess.h
deleted file mode 100644
index 01de2c5..0000000
--- a/drivers/net/npe/include/IxOsalEndianess.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/** 
- * @file IxOsalEndianess.h (Obsolete file) 
- * 
- * @brief Header file for determining system endianess and OS
- * 
- * @par
- * @version $Revision: 1.1
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-#ifndef IxOsalEndianess_H
-#define IxOsalEndianess_H
-
-#if defined (__vxworks) || defined (__linux)
-
-/* get ntohl/ntohs/htohl/htons macros and CPU definitions for VxWorks */
-/* #include <netinet/in.h>  */
-
-#elif defined (__wince)
-
-/* get ntohl/ntohs/htohl/htons macros definitions for WinCE */
-#include <Winsock2.h>
-
-#else
-
-#error Unknown OS, please add a section with the include file for htonl/htons/ntohl/ntohs
-
-#endif /* vxworks or linux or wince */
-
-/* Compiler specific endianness selector - WARNING this works only with arm gcc, use appropriate defines with diab */
-
-#ifndef __wince
-
-#if defined (__ARMEL__)
-
-#ifndef __LITTLE_ENDIAN
-
-#define __LITTLE_ENDIAN
-
-#endif /* _LITTLE_ENDIAN */
-
-#elif defined (__ARMEB__) || CPU == SIMSPARCSOLARIS
-
-#ifndef __BIG_ENDIAN
-
-#define __BIG_ENDIAN
-
-#endif /* __BIG_ENDIAN */
-
-#else
-
-#error Error, could not identify target endianness
-
-#endif /* endianness selector no WinCE OSes */
-
-#else /* ndef __wince */
-
-#define __LITTLE_ENDIAN
-
-#endif /* def __wince */
-
-
-/* OS mode selector */
-#if defined (__vxworks) && defined (__LITTLE_ENDIAN)
-
-#define IX_OSAL_VXWORKS_LE
-
-#elif defined (__vxworks) && defined (__BIG_ENDIAN)
-
-#define IX_OSAL_VXWORKS_BE
-
-#elif defined (__linux) && defined (__BIG_ENDIAN)
-
-#define IX_OSAL_LINUX_BE
-
-#elif defined (__linux) && defined (__LITTLE_ENDIAN)
-
-#define IX_OSAL_LINUX_LE
-
-#elif defined (BOOTLOADER_BLD) && defined (__LITTLE_ENDIAN)
-
-#define IX_OSAL_EBOOT_LE
-
-#elif defined (__wince) && defined (__LITTLE_ENDIAN)
-
-#define IX_OSAL_WINCE_LE
-
-#else
-
-#error Unknown OS/Endianess combination - only vxWorks BE LE, Linux BE LE, WinCE BE LE are supported
-
-#endif /* mode selector */
-
-
-
-#endif /* IxOsalEndianess_H */
diff --git a/drivers/net/npe/include/IxOsalIoMem.h b/drivers/net/npe/include/IxOsalIoMem.h
deleted file mode 100644
index 7cb9c18..0000000
--- a/drivers/net/npe/include/IxOsalIoMem.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * @file        IxOsalIoMem.h
- * @author	Intel Corporation
- * @date        25-08-2004
- *
- * @brief       description goes here
- */
-
-/**
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsalIoMem_H
-#define IxOsalIoMem_H
-
-
-/*
- * Decide OS and Endianess, such as IX_OSAL_VXWORKS_LE.
- */
-#include "IxOsalEndianess.h"
-
-/**
- * @defgroup IxOsalIoMem Osal IoMem module
- *
- * @brief I/O memory and endianess support.
- *
- * @{ 
- */
-
-/* Low-level conversion macros - DO NOT USE UNLESS ABSOLUTELY NEEDED */
-#ifndef __wince
-
-
-/* 
- * Private function to swap word
- */
-#ifdef __XSCALE__
-static __inline__ UINT32
-ixOsalCoreWordSwap (UINT32 wordIn)
-{
-    /*
-     * Storage for the swapped word 
-     */
-    UINT32 wordOut;
-
-    /*
-     * wordIn = A, B, C, D 
-     */
-    __asm__ (" eor r1, %1, %1, ror #16;"	/* R1 =      A^C, B^D, C^A, D^B */
-	     " bic r1, r1, #0x00ff0000;"	/* R1 =      A^C, 0  , C^A, D^B */
-	     " mov %0, %1, ror #8;"	/* wordOut = D,   A,   B,   C   */
-	     " eor %0, %0, r1, lsr #8;"	/* wordOut = D,   C,   B,   A   */
-  : "=r" (wordOut): "r" (wordIn):"r1");
-
-    return wordOut;
-}
-
-#define IX_OSAL_SWAP_LONG(wData)          (ixOsalCoreWordSwap(wData))
-#else
-#define IX_OSAL_SWAP_LONG(wData)          ((wData >> 24) | (((wData >> 16) & 0xFF) << 8) | (((wData >> 8) & 0xFF) << 16) | ((wData & 0xFF) << 24))
-#endif
-
-#else /* ndef __wince */
-#define IX_OSAL_SWAP_LONG(wData)        ((((UINT32)wData << 24) | ((UINT32)wData >> 24)) | (((wData << 8) & 0xff0000) | ((wData >> 8) & 0xff00)))
-#endif /* ndef __wince */
-
-#define IX_OSAL_SWAP_SHORT(sData)         ((sData >> 8) | ((sData & 0xFF) << 8))
-#define IX_OSAL_SWAP_SHORT_ADDRESS(sAddr) ((sAddr) ^ 0x2)
-#define IX_OSAL_SWAP_BYTE_ADDRESS(bAddr)  ((bAddr) ^ 0x3)
-
-#define IX_OSAL_BE_XSTOBUSL(wData)  (wData)
-#define IX_OSAL_BE_XSTOBUSS(sData)  (sData)
-#define IX_OSAL_BE_XSTOBUSB(bData)  (bData)
-#define IX_OSAL_BE_BUSTOXSL(wData)  (wData)
-#define IX_OSAL_BE_BUSTOXSS(sData)  (sData)
-#define IX_OSAL_BE_BUSTOXSB(bData)  (bData)
-
-#define IX_OSAL_LE_AC_XSTOBUSL(wAddr) (wAddr)
-#define IX_OSAL_LE_AC_XSTOBUSS(sAddr) IX_OSAL_SWAP_SHORT_ADDRESS(sAddr)
-#define IX_OSAL_LE_AC_XSTOBUSB(bAddr) IX_OSAL_SWAP_BYTE_ADDRESS(bAddr)
-#define IX_OSAL_LE_AC_BUSTOXSL(wAddr) (wAddr)
-#define IX_OSAL_LE_AC_BUSTOXSS(sAddr) IX_OSAL_SWAP_SHORT_ADDRESS(sAddr)
-#define IX_OSAL_LE_AC_BUSTOXSB(bAddr) IX_OSAL_SWAP_BYTE_ADDRESS(bAddr)
-
-#define IX_OSAL_LE_DC_XSTOBUSL(wData) IX_OSAL_SWAP_LONG(wData)
-#define IX_OSAL_LE_DC_XSTOBUSS(sData) IX_OSAL_SWAP_SHORT(sData)
-#define IX_OSAL_LE_DC_XSTOBUSB(bData) (bData)
-#define IX_OSAL_LE_DC_BUSTOXSL(wData) IX_OSAL_SWAP_LONG(wData)
-#define IX_OSAL_LE_DC_BUSTOXSS(sData) IX_OSAL_SWAP_SHORT(sData)
-#define IX_OSAL_LE_DC_BUSTOXSB(bData) (bData)
-
-
-/*
- * Decide SDRAM mapping, then implement read/write
- */
-#include "IxOsalMemAccess.h"
-
-
-/**
- * @ingroup IxOsalIoMem
- * @enum IxOsalMapEntryType
- * @brief This is an emum for OSAL I/O mem map type. 
- */
-typedef enum
-{
-    IX_OSAL_STATIC_MAP = 0,	 /**<Set map entry type to static map */
-    IX_OSAL_DYNAMIC_MAP	     /**<Set map entry type to dynamic map */
-} IxOsalMapEntryType;
-
-
-/**
- * @ingroup IxOsalIoMem
- * @enum IxOsalMapEndianessType
- * @brief This is an emum for OSAL I/O mem Endianess and Coherency mode.
- */
-typedef enum
-{
-    IX_OSAL_BE = 0x1,      /**<Set map endian mode to Big Endian */
-    IX_OSAL_LE_AC = 0x2,   /**<Set map endian mode to Little Endian, Address Coherent */
-    IX_OSAL_LE_DC = 0x4,   /**<Set map endian mode to Little Endian, Data Coherent */
-    IX_OSAL_LE = 0x8       /**<Set map endian mode to Little Endian without specifying coherency mode */
-} IxOsalMapEndianessType;
-
-
-/**
- * @struct IxOsalMemoryMap 
- * @brief IxOsalMemoryMap structure
- */
-typedef struct _IxOsalMemoryMap
-{
-    IxOsalMapEntryType type;   /**< map type - IX_OSAL_STATIC_MAP or IX_OSAL_DYNAMIC_MAP */
-
-    UINT32 physicalAddress;    /**< physical address of the memory mapped I/O zone */
-
-    UINT32 size;               /**< size of the map */
-
-    UINT32 virtualAddress;     /**< virtual address of the zone; must be predefined
-                                    in the global memory map for static maps and has
-                                    to be NULL for dynamic maps (populated on allocation)
-								*/
-    /*
-     * pointer to a map function called to map a dynamic map; 
-     * will populate the virtualAddress field 
-     */
-    void (*mapFunction) (struct _IxOsalMemoryMap * map);   /**< pointer to a map function called to map a dynamic map */
-
-    /*
-     * pointer to a map function called to unmap a dynamic map; 
-     * will reset the virtualAddress field to NULL 
-     */
-    void (*unmapFunction) (struct _IxOsalMemoryMap * map); /**< pointer to a map function called to unmap a dynamic map */
-
-    /*
-     * reference count describing how many components share this map; 
-     * actual allocation/deallocation for dynamic maps is done only 
-     * between 0 <=> 1 transitions of the counter 
-     */
-    UINT32 refCount;   /**< reference count describing how many components share this map */
-
-    /*
-     * memory endian type for the map; can be a combination of IX_OSAL_BE (Big 
-     * Endian) and IX_OSAL_LE or IX_OSAL_LE_AC or IX_OSAL_LE_DC
-     * (Little Endian, Address Coherent or Data Coherent). Any combination is
-     * allowed provided it contains at most one LE flag - e.g.
-     * (IX_OSAL_BE), (IX_OSAL_LE_AC), (IX_OSAL_BE | IX_OSAL_LE_DC) are valid
-     * combinations while (IX_OSAL_BE | IX_OSAL_LE_DC | IX_OSAL_LE_AC) is not. 
-     */
-    IxOsalMapEndianessType mapEndianType; /**< memory endian type for the map */
-
-    char *name;      /**< user-friendly name */
-} IxOsalMemoryMap;
-
-
-
-
-/* Internal function to map a memory zone
- * NOTE - This should not be called by the user.
- * Use the macro IX_OSAL_MEM_MAP instead
- */
-PUBLIC void *ixOsalIoMemMap (UINT32 requestedAddress,
-			     UINT32 size,
-			     IxOsalMapEndianessType requestedCoherency);
-
-
-/* Internal function to unmap a memory zone mapped with ixOsalIoMemMap
- * NOTE - This should not be called by the user.
- * Use the macro IX_OSAL_MEM_UNMAP instead
- */
-PUBLIC void ixOsalIoMemUnmap (UINT32 requestedAddress, UINT32 coherency);
-
-
-/* Internal function to convert virtual address to physical address 
- * NOTE - This should not be called by the user.
- * Use the macro IX_OSAL_MMAP_VIRT_TO_PHYS */
-PUBLIC UINT32 ixOsalIoMemVirtToPhys (UINT32 virtualAddress, UINT32 coherency);
-
-
-/* Internal function to convert physical address to virtual address 
- * NOTE - This should not be called by the user.
- * Use the macro IX_OSAL_MMAP_PHYS_TO_VIRT */
-PUBLIC UINT32
-ixOsalIoMemPhysToVirt (UINT32 physicalAddress, UINT32 coherency);
-
-/**
- * @ingroup IxOsalIoMem
- *
- * @def IX_OSAL_MEM_MAP(physAddr, size)
- *
- * @brief Map an I/O mapped physical memory zone to virtual zone and return virtual
- *        pointer.
- * @param  physAddr - the physical address
- * @param  size     - the size
- * @return start address of the virtual memory zone.
- *
- * @note  This function maps an I/O mapped physical memory zone of the given size
- * into a virtual memory zone accessible by the caller and returns a cookie - 
- * the start address of the virtual memory zone. 
- * IX_OSAL_MMAP_PHYS_TO_VIRT should NOT therefore be used on the returned 
- * virtual address.
- * The memory zone is to be unmapped using IX_OSAL_MEM_UNMAP once the caller has
- * finished using this zone (e.g. on driver unload) using the cookie as 
- * parameter.
- * The IX_OSAL_READ/WRITE_LONG/SHORT macros should be used to read and write 
- * the mapped memory, adding the necessary offsets to the address cookie.
- */
-#define IX_OSAL_MEM_MAP(physAddr, size) \
-    ixOsalIoMemMap((physAddr), (size), IX_OSAL_COMPONENT_MAPPING)
-
-
-/**
- * @ingroup IxOsalIoMem
- *
- * @def IX_OSAL_MEM_UNMAP(virtAddr)
- *
- * @brief Unmap a previously mapped I/O memory zone using virtual pointer obtained
- *        during the mapping operation.
- *        pointer.
- * @param  virtAddr - the virtual pointer to the zone to be unmapped.
- * @return none
- *
- * @note  This function unmaps a previously mapped I/O memory zone using
- * the cookie obtained in the mapping operation. The memory zone in question
- * becomes unavailable to the caller once unmapped and the cookie should be
- * discarded.
- *
- * This function cannot fail if the given parameter is correct and does not
- * return a value.
- */
-#define IX_OSAL_MEM_UNMAP(virtAddr) \
-    ixOsalIoMemUnmap ((virtAddr), IX_OSAL_COMPONENT_MAPPING)
-
-/**
- * @ingroup IxOsalIoMem
- *
- * @def IX_OSAL_MMAP_VIRT_TO_PHYS(virtAddr)
- *
- * @brief This function Converts a virtual address into a physical 
- * address, including the dynamically mapped memory.
- *
- * @param  virtAddr - virtual address to convert
- * Return value: corresponding physical address, or NULL
- */
-#define IX_OSAL_MMAP_VIRT_TO_PHYS(virtAddr) \
-    ixOsalIoMemVirtToPhys(virtAddr, IX_OSAL_COMPONENT_MAPPING)
-
-
-/**
- * @ingroup IxOsalIoMem
- *
- * @def IX_OSAL_MMAP_PHYS_TO_VIRT(physAddr)
- *
- * @brief  This function Converts a virtual address into a physical 
- * address, including the dynamically mapped memory.
- *
- * @param  physAddr - physical address to convert
- * Return value: corresponding virtual address, or NULL
- *
- */
-#define IX_OSAL_MMAP_PHYS_TO_VIRT(physAddr) \
-    ixOsalIoMemPhysToVirt(physAddr, IX_OSAL_COMPONENT_MAPPING)
-
-/**
- * @} IxOsalIoMem
- */
-
-#endif /* IxOsalIoMem_H */
diff --git a/drivers/net/npe/include/IxOsalMemAccess.h b/drivers/net/npe/include/IxOsalMemAccess.h
deleted file mode 100644
index be7472a..0000000
--- a/drivers/net/npe/include/IxOsalMemAccess.h
+++ /dev/null
@@ -1,470 +0,0 @@
-/** 
- * @file IxOsalMemAccess.h
- * 
- * @brief Header file for memory access
- * 
- * @par
- * @version $Revision: 1.0 $
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsalMemAccess_H
-#define IxOsalMemAccess_H
-
-
-/* Global BE switch
- * 
- *  Should be set only in BE mode and only if the component uses I/O memory.
- */
-
-#if defined (__BIG_ENDIAN)
-
-#define IX_OSAL_BE_MAPPING
-
-#endif /* Global switch */
-
-
-/* By default only static memory maps in use;
-   define IX_OSAL_DYNAMIC_MEMORY_MAP per component if dynamic maps are
-   used instead in that component */
-#define IX_OSAL_STATIC_MEMORY_MAP
-
-
-/* 
- * SDRAM coherency mode
- * Must be defined to BE, LE_DATA_COHERENT or LE_ADDRESS_COHERENT.
- * The mode changes depending on OS 
- */
-#if defined (IX_OSAL_LINUX_BE) || defined (IX_OSAL_VXWORKS_BE)
-
-#define IX_SDRAM_BE
-
-#elif defined (IX_OSAL_VXWORKS_LE)
-
-#define IX_SDRAM_LE_DATA_COHERENT
-
-#elif defined (IX_OSAL_LINUX_LE)
-
-#define IX_SDRAM_LE_DATA_COHERENT
-
-#elif defined (IX_OSAL_WINCE_LE)
-
-#define IX_SDRAM_LE_DATA_COHERENT
-
-#elif defined (IX_OSAL_EBOOT_LE)
-
-#define IX_SDRAM_LE_ADDRESS_COHERENT
-
-#endif
-
-
-
-
-/**************************************
- * Retrieve current component mapping *
- **************************************/
-
-/*
- * Only use customized mapping for LE. 
- * 
- */
-#if defined (IX_OSAL_VXWORKS_LE) || defined (IX_OSAL_LINUX_LE) || defined (IX_OSAL_WINCE_LE) || defined (IX_OSAL_EBOOT_LE)
-
-#include "IxOsalOsIxp400CustomizedMapping.h"
-
-#endif
-
-
-/*******************************************************************
- * Turn off IX_STATIC_MEMORY map for components using dynamic maps *
- *******************************************************************/
-#ifdef IX_OSAL_DYNAMIC_MEMORY_MAP
-
-#undef IX_OSAL_STATIC_MEMORY_MAP
-
-#endif
-
-
-/************************************************************
- * Turn off BE access for components using LE or no mapping *
- ************************************************************/
-
-#if ( defined (IX_OSAL_LE_AC_MAPPING) || defined (IX_OSAL_LE_DC_MAPPING) || defined (IX_OSAL_NO_MAPPING) )
-
-#undef IX_OSAL_BE_MAPPING
-
-#endif
-
-
-/*****************
- * Safety checks *
- *****************/
-
-/* Default to no_mapping */
-#if !defined (IX_OSAL_BE_MAPPING) && !defined (IX_OSAL_LE_AC_MAPPING) && !defined (IX_OSAL_LE_DC_MAPPING) && !defined (IX_OSAL_NO_MAPPING)
-
-#define IX_OSAL_NO_MAPPING
-
-#endif /* check at least one mapping */
-
-/* No more than one mapping can be defined for a component */
-#if   (defined (IX_OSAL_BE_MAPPING)    && defined (IX_OSAL_LE_AC_MAPPING))  \
-    ||(defined (IX_OSAL_BE_MAPPING)    && defined (IX_OSAL_LE_DC_MAPPING))  \
-    ||(defined (IX_OSAL_BE_MAPPING)    && defined (IX_OSAL_NO_MAPPING))     \
-    ||(defined (IX_OSAL_LE_DC_MAPPING) && defined (IX_OSAL_NO_MAPPING))     \
-    ||(defined (IX_OSAL_LE_DC_MAPPING) && defined (IX_OSAL_LE_AC_MAPPING))	\
-    ||(defined (IX_OSAL_LE_AC_MAPPING) && defined (IX_OSAL_NO_MAPPING))
-
-
-#ifdef IX_OSAL_BE_MAPPING
-#warning IX_OSAL_BE_MAPPING is defined
-#endif
-
-#ifdef IX_OSAL_LE_AC_MAPPING
-#warning IX_OSAL_LE_AC_MAPPING is defined
-#endif
-
-#ifdef IX_OSAL_LE_DC_MAPPING
-#warning IX_OSAL_LE_DC_MAPPING is defined
-#endif
-
-#ifdef IX_OSAL_NO_MAPPING
-#warning IX_OSAL_NO_MAPPING is defined
-#endif
-
-#error More than one I/O mapping is defined, please check your component mapping
-
-#endif /* check at most one mapping */
-
-
-/* Now set IX_OSAL_COMPONENT_MAPPING */
-
-#ifdef IX_OSAL_BE_MAPPING
-#define IX_OSAL_COMPONENT_MAPPING IX_OSAL_BE
-#endif
-
-#ifdef IX_OSAL_LE_AC_MAPPING
-#define IX_OSAL_COMPONENT_MAPPING IX_OSAL_LE_AC
-#endif
-
-#ifdef IX_OSAL_LE_DC_MAPPING
-#define IX_OSAL_COMPONENT_MAPPING IX_OSAL_LE_DC
-#endif
-
-#ifdef IX_OSAL_NO_MAPPING
-#define IX_OSAL_COMPONENT_MAPPING IX_OSAL_LE
-#endif
-
-
-/* SDRAM coherency should be defined */
-#if !defined (IX_SDRAM_BE) && !defined (IX_SDRAM_LE_DATA_COHERENT) && !defined (IX_SDRAM_LE_ADDRESS_COHERENT)
-
-#error SDRAM coherency must be defined
-
-#endif /* SDRAM coherency must be defined */
-
-/* SDRAM coherency cannot be defined in several ways */
-#if (defined (IX_SDRAM_BE) && (defined (IX_SDRAM_LE_DATA_COHERENT) || defined (IX_SDRAM_LE_ADDRESS_COHERENT))) \
-    || (defined (IX_SDRAM_LE_DATA_COHERENT) && (defined (IX_SDRAM_BE) || defined (IX_SDRAM_LE_ADDRESS_COHERENT))) \
-    || (defined (IX_SDRAM_LE_ADDRESS_COHERENT) && (defined (IX_SDRAM_BE) || defined (IX_SDRAM_LE_DATA_COHERENT)))
-
-#error SDRAM coherency cannot be defined in more than one way
-
-#endif /* SDRAM coherency must be defined exactly once */
-
-
-/*********************
- * Read/write macros *
- *********************/
-
-/* WARNING - except for addition of special cookie read/write macros (see below)
-             these macros are NOT user serviceable. Please do not modify */
-
-#define IX_OSAL_READ_LONG_RAW(wAddr)          (*(wAddr))
-#define IX_OSAL_READ_SHORT_RAW(sAddr)         (*(sAddr))
-#define IX_OSAL_READ_BYTE_RAW(bAddr)          (*(bAddr))
-#define IX_OSAL_WRITE_LONG_RAW(wAddr, wData)  (*(wAddr) = (wData))
-#define IX_OSAL_WRITE_SHORT_RAW(sAddr,sData)  (*(sAddr) = (sData))
-#define IX_OSAL_WRITE_BYTE_RAW(bAddr, bData)  (*(bAddr) = (bData))
-
-#ifdef __linux
-
-/* Linux - specific cookie reads/writes. 
-  Redefine per OS if dynamic memory maps are used
-  and I/O memory is accessed via functions instead of raw pointer access. */
-
-#define IX_OSAL_READ_LONG_COOKIE(wCookie)           (readl((UINT32) (wCookie) ))
-#define IX_OSAL_READ_SHORT_COOKIE(sCookie)          (readw((UINT32) (sCookie) ))
-#define IX_OSAL_READ_BYTE_COOKIE(bCookie)           (readb((UINT32) (bCookie) ))
-#define IX_OSAL_WRITE_LONG_COOKIE(wCookie, wData)   (writel(wData, (UINT32) (wCookie) ))
-#define IX_OSAL_WRITE_SHORT_COOKIE(sCookie, sData)  (writew(sData, (UINT32) (sCookie) ))
-#define IX_OSAL_WRITE_BYTE_COOKIE(bCookie, bData)   (writeb(bData, (UINT32) (bCookie) ))
-
-#endif /* linux */
-
-#ifdef __wince
-
-/* WinCE - specific cookie reads/writes. */
-
-static __inline__ UINT32
-ixOsalWinCEReadLCookie (volatile UINT32 * lCookie)
-{
-    return *lCookie;
-}
-
-static __inline__ UINT16
-ixOsalWinCEReadWCookie (volatile UINT16 * wCookie)
-{
-#if 0
-    UINT32 auxVal = *((volatile UINT32 *) wCookie);
-    if ((unsigned) wCookie & 3)
-	return (UINT16) (auxVal >> 16);
-    else
-	return (UINT16) (auxVal & 0xffff);
-#else
-    return *wCookie;
-#endif
-}
-
-static __inline__ UINT8
-ixOsalWinCEReadBCookie (volatile UINT8 * bCookie)
-{
-#if 0
-    UINT32 auxVal = *((volatile UINT32 *) bCookie);
-    return (UINT8) ((auxVal >> (3 - (((unsigned) bCookie & 3) << 3)) & 0xff));
-#else
-    return *bCookie;
-#endif
-}
-
-static __inline__ void
-ixOsalWinCEWriteLCookie (volatile UINT32 * lCookie, UINT32 lVal)
-{
-    *lCookie = lVal;
-}
-
-static __inline__ void
-ixOsalWinCEWriteWCookie (volatile UINT16 * wCookie, UINT16 wVal)
-{
-#if 0
-    volatile UINT32 *auxCookie =
-	(volatile UINT32 *) ((unsigned) wCookie & ~3);
-    if ((unsigned) wCookie & 3)
-    {
-	*auxCookie &= 0xffff;
-	*auxCookie |= (UINT32) wVal << 16;
-    }
-    else
-    {
-	*auxCookie &= ~0xffff;
-	*auxCookie |= (UINT32) wVal & 0xffff;
-    }
-#else
-    *wCookie = wVal;
-#endif
-}
-
-static __inline__ void
-ixOsalWinCEWriteBCookie (volatile UINT8 * bCookie, UINT8 bVal)
-{
-#if 0
-    volatile UINT32 *auxCookie =
-	(volatile UINT32 *) ((unsigned) bCookie & ~3);
-    *auxCookie &= 0xff << (3 - (((unsigned) bCookie & 3) << 3));
-    *auxCookie |= (UINT32) bVal << (3 - (((unsigned) bCookie & 3) << 3));
-#else
-    *bCookie = bVal;
-#endif
-}
-
-
-#define IX_OSAL_READ_LONG_COOKIE(wCookie)           (ixOsalWinCEReadLCookie(wCookie))
-#define IX_OSAL_READ_SHORT_COOKIE(sCookie)          (ixOsalWinCEReadWCookie(sCookie))
-#define IX_OSAL_READ_BYTE_COOKIE(bCookie)           (ixOsalWinCEReadBCookie(bCookie))
-#define IX_OSAL_WRITE_LONG_COOKIE(wCookie, wData)   (ixOsalWinCEWriteLCookie(wCookie, wData))
-#define IX_OSAL_WRITE_SHORT_COOKIE(sCookie, sData)  (ixOsalWinCEWriteWCookie(sCookie, sData))
-#define IX_OSAL_WRITE_BYTE_COOKIE(bCookie, bData)   (ixOsalWinCEWriteBCookie(bCookie, bData))
-
-#endif /* wince */
-
-#if defined (__vxworks) || (defined (__linux) && defined (IX_OSAL_STATIC_MEMORY_MAP)) || \
-                           (defined (__wince) && defined (IX_OSAL_STATIC_MEMORY_MAP))
-
-#define IX_OSAL_READ_LONG_IO(wAddr)            IX_OSAL_READ_LONG_RAW(wAddr)
-#define IX_OSAL_READ_SHORT_IO(sAddr)           IX_OSAL_READ_SHORT_RAW(sAddr)
-#define IX_OSAL_READ_BYTE_IO(bAddr)            IX_OSAL_READ_BYTE_RAW(bAddr)
-#define IX_OSAL_WRITE_LONG_IO(wAddr, wData)    IX_OSAL_WRITE_LONG_RAW(wAddr, wData)
-#define IX_OSAL_WRITE_SHORT_IO(sAddr, sData)   IX_OSAL_WRITE_SHORT_RAW(sAddr, sData)
-#define IX_OSAL_WRITE_BYTE_IO(bAddr, bData)    IX_OSAL_WRITE_BYTE_RAW(bAddr, bData)
-
-#elif (defined (__linux) && !defined (IX_OSAL_STATIC_MEMORY_MAP)) || \
-      (defined (__wince) && !defined (IX_OSAL_STATIC_MEMORY_MAP))
-
-#ifndef __wince
-#include <asm/io.h>
-#endif /* ndef __wince */
-
-#define IX_OSAL_READ_LONG_IO(wAddr)            IX_OSAL_READ_LONG_COOKIE(wAddr)
-#define IX_OSAL_READ_SHORT_IO(sAddr)           IX_OSAL_READ_SHORT_COOKIE(sAddr)
-#define IX_OSAL_READ_BYTE_IO(bAddr)            IX_OSAL_READ_BYTE_COOKIE(bAddr)
-#define IX_OSAL_WRITE_LONG_IO(wAddr, wData)    IX_OSAL_WRITE_LONG_COOKIE(wAddr, wData)
-#define IX_OSAL_WRITE_SHORT_IO(sAddr, sData)   IX_OSAL_WRITE_SHORT_COOKIE(sAddr, sData)
-#define IX_OSAL_WRITE_BYTE_IO(bAddr, bData)    IX_OSAL_WRITE_BYTE_COOKIE(bAddr, bData)
-
-#endif
-
-/* Define BE macros */
-#define IX_OSAL_READ_LONG_BE(wAddr)          IX_OSAL_BE_BUSTOXSL(IX_OSAL_READ_LONG_IO((volatile UINT32 *) (wAddr) ))
-#define IX_OSAL_READ_SHORT_BE(sAddr)         IX_OSAL_BE_BUSTOXSS(IX_OSAL_READ_SHORT_IO((volatile UINT16 *) (sAddr) ))
-#define IX_OSAL_READ_BYTE_BE(bAddr)          IX_OSAL_BE_BUSTOXSB(IX_OSAL_READ_BYTE_IO((volatile UINT8 *) (bAddr) ))
-#define IX_OSAL_WRITE_LONG_BE(wAddr, wData)  IX_OSAL_WRITE_LONG_IO((volatile UINT32 *) (wAddr), IX_OSAL_BE_XSTOBUSL((UINT32) (wData) ))
-#define IX_OSAL_WRITE_SHORT_BE(sAddr, sData) IX_OSAL_WRITE_SHORT_IO((volatile UINT16 *) (sAddr), IX_OSAL_BE_XSTOBUSS((UINT16) (sData) ))
-#define IX_OSAL_WRITE_BYTE_BE(bAddr, bData)  IX_OSAL_WRITE_BYTE_IO((volatile UINT8 *) (bAddr), IX_OSAL_BE_XSTOBUSB((UINT8) (bData) ))
-
-/* Define LE AC macros */
-#define IX_OSAL_READ_LONG_LE_AC(wAddr)          IX_OSAL_READ_LONG_IO((volatile UINT32 *) IX_OSAL_LE_AC_BUSTOXSL((UINT32) (wAddr) ))
-#define IX_OSAL_READ_SHORT_LE_AC(sAddr)         IX_OSAL_READ_SHORT_IO((volatile UINT16 *) IX_OSAL_LE_AC_BUSTOXSS((UINT32) (sAddr) ))
-#define IX_OSAL_READ_BYTE_LE_AC(bAddr)          IX_OSAL_READ_BYTE_IO((volatile UINT8 *) IX_OSAL_LE_AC_BUSTOXSB((UINT32) (bAddr) ))
-#define IX_OSAL_WRITE_LONG_LE_AC(wAddr, wData)  IX_OSAL_WRITE_LONG_IO((volatile UINT32 *) IX_OSAL_LE_AC_XSTOBUSL((UINT32) (wAddr) ), (UINT32) (wData))
-#define IX_OSAL_WRITE_SHORT_LE_AC(sAddr, sData) IX_OSAL_WRITE_SHORT_IO((volatile UINT16 *) IX_OSAL_LE_AC_XSTOBUSS((UINT32) (sAddr) ), (UINT16) (sData))
-#define IX_OSAL_WRITE_BYTE_LE_AC(bAddr, bData)  IX_OSAL_WRITE_BYTE_IO((volatile UINT8 *) IX_OSAL_LE_AC_XSTOBUSB((UINT32) (bAddr) ), (UINT8) (bData))
-
-
-/* Inline functions are required here to avoid reading the same I/O location 2 or 4 times for the byte swap */
-static __inline__ UINT32
-ixOsalDataCoherentLongReadSwap (volatile UINT32 * wAddr)
-{
-    UINT32 wData = IX_OSAL_READ_LONG_IO (wAddr);
-    return IX_OSAL_LE_DC_BUSTOXSL (wData);
-}
-
-static __inline__ UINT16
-ixOsalDataCoherentShortReadSwap (volatile UINT16 * sAddr)
-{
-    UINT16 sData = IX_OSAL_READ_SHORT_IO (sAddr);
-    return IX_OSAL_LE_DC_BUSTOXSS (sData);
-}
-
-static __inline__ void
-ixOsalDataCoherentLongWriteSwap (volatile UINT32 * wAddr, UINT32 wData)
-{
-    wData = IX_OSAL_LE_DC_XSTOBUSL (wData);
-    IX_OSAL_WRITE_LONG_IO (wAddr, wData);
-}
-
-static __inline__ void
-ixOsalDataCoherentShortWriteSwap (volatile UINT16 * sAddr, UINT16 sData)
-{
-    sData = IX_OSAL_LE_DC_XSTOBUSS (sData);
-    IX_OSAL_WRITE_SHORT_IO (sAddr, sData);
-}
-
-/* Define LE DC macros */
-
-#define IX_OSAL_READ_LONG_LE_DC(wAddr)          ixOsalDataCoherentLongReadSwap((volatile UINT32 *) (wAddr) )
-#define IX_OSAL_READ_SHORT_LE_DC(sAddr)         ixOsalDataCoherentShortReadSwap((volatile UINT16 *) (sAddr) )
-#define IX_OSAL_READ_BYTE_LE_DC(bAddr)          IX_OSAL_LE_DC_BUSTOXSB(IX_OSAL_READ_BYTE_IO((volatile UINT8 *) (bAddr) ))
-#define IX_OSAL_WRITE_LONG_LE_DC(wAddr, wData)  ixOsalDataCoherentLongWriteSwap((volatile UINT32 *) (wAddr), (UINT32) (wData))
-#define IX_OSAL_WRITE_SHORT_LE_DC(sAddr, sData) ixOsalDataCoherentShortWriteSwap((volatile UINT16 *) (sAddr), (UINT16) (sData))
-#define IX_OSAL_WRITE_BYTE_LE_DC(bAddr, bData)  IX_OSAL_WRITE_BYTE_IO((volatile UINT8 *) (bAddr), IX_OSAL_LE_DC_XSTOBUSB((UINT8) (bData)))
-
-#if defined (IX_OSAL_BE_MAPPING)
-
-#define IX_OSAL_READ_LONG(wAddr)            IX_OSAL_READ_LONG_BE(wAddr) 
-#define IX_OSAL_READ_SHORT(sAddr)	        IX_OSAL_READ_SHORT_BE(sAddr) 
-#define IX_OSAL_READ_BYTE(bAddr)	        IX_OSAL_READ_BYTE_BE(bAddr) 
-#define IX_OSAL_WRITE_LONG(wAddr, wData)	IX_OSAL_WRITE_LONG_BE(wAddr, wData)
-#define IX_OSAL_WRITE_SHORT(sAddr, sData)	IX_OSAL_WRITE_SHORT_BE(sAddr, sData)
-#define IX_OSAL_WRITE_BYTE(bAddr, bData)	IX_OSAL_WRITE_BYTE_BE(bAddr, bData)
-
-#elif defined (IX_OSAL_LE_AC_MAPPING)
-
-#define IX_OSAL_READ_LONG(wAddr)            IX_OSAL_READ_LONG_LE_AC(wAddr) 
-#define IX_OSAL_READ_SHORT(sAddr)	        IX_OSAL_READ_SHORT_LE_AC(sAddr) 
-#define IX_OSAL_READ_BYTE(bAddr)	        IX_OSAL_READ_BYTE_LE_AC(bAddr) 
-#define IX_OSAL_WRITE_LONG(wAddr, wData)	IX_OSAL_WRITE_LONG_LE_AC(wAddr, wData)
-#define IX_OSAL_WRITE_SHORT(sAddr, sData)	IX_OSAL_WRITE_SHORT_LE_AC(sAddr, sData)
-#define IX_OSAL_WRITE_BYTE(bAddr, bData)	IX_OSAL_WRITE_BYTE_LE_AC(bAddr, bData)
-
-#elif defined (IX_OSAL_LE_DC_MAPPING)
-
-#define IX_OSAL_READ_LONG(wAddr)            IX_OSAL_READ_LONG_LE_DC(wAddr) 
-#define IX_OSAL_READ_SHORT(sAddr)	        IX_OSAL_READ_SHORT_LE_DC(sAddr) 
-#define IX_OSAL_READ_BYTE(bAddr)	        IX_OSAL_READ_BYTE_LE_DC(bAddr) 
-#define IX_OSAL_WRITE_LONG(wAddr, wData)	IX_OSAL_WRITE_LONG_LE_DC(wAddr, wData)
-#define IX_OSAL_WRITE_SHORT(sAddr, sData)	IX_OSAL_WRITE_SHORT_LE_DC(sAddr, sData)
-#define IX_OSAL_WRITE_BYTE(bAddr, bData)	IX_OSAL_WRITE_BYTE_LE_DC(bAddr, bData)
-
-#endif   /* End of BE and LE coherency mode switch */
-
-
-/* Reads/writes to and from memory shared with NPEs - depends on the SDRAM coherency */
-
-#if defined (IX_SDRAM_BE)
-
-#define IX_OSAL_READ_BE_SHARED_LONG(wAddr)            IX_OSAL_READ_LONG_RAW(wAddr)
-#define IX_OSAL_READ_BE_SHARED_SHORT(sAddr)           IX_OSAL_READ_SHORT_RAW(sAddr)
-#define IX_OSAL_READ_BE_SHARED_BYTE(bAddr)            IX_OSAL_READ_BYTE_RAW(bAddr)
-
-#define IX_OSAL_WRITE_BE_SHARED_LONG(wAddr, wData)    IX_OSAL_WRITE_LONG_RAW(wAddr, wData)
-#define IX_OSAL_WRITE_BE_SHARED_SHORT(sAddr, sData)   IX_OSAL_WRITE_SHORT_RAW(sAddr, sData)
-#define IX_OSAL_WRITE_BE_SHARED_BYTE(bAddr, bData)    IX_OSAL_WRITE_BYTE_RAW(bAddr, bData)
-
-#define IX_OSAL_SWAP_BE_SHARED_LONG(wData)            (wData)
-#define IX_OSAL_SWAP_BE_SHARED_SHORT(sData)           (sData)
-#define IX_OSAL_SWAP_BE_SHARED_BYTE(bData)            (bData)
-
-#elif defined (IX_SDRAM_LE_ADDRESS_COHERENT)
-
-#define IX_OSAL_READ_BE_SHARED_LONG(wAddr)            IX_OSAL_READ_LONG_RAW(wAddr)
-#define IX_OSAL_READ_BE_SHARED_SHORT(sAddr)           IX_OSAL_READ_SHORT_RAW(IX_OSAL_SWAP_SHORT_ADDRESS(sAddr))
-#define IX_OSAL_READ_BE_SHARED_BYTE(bAddr)            IX_OSAL_READ_BYTE_RAW(IX_OSAL_SWAP_BYTE_ADDRESS(bAddr))
-
-#define IX_OSAL_WRITE_BE_SHARED_LONG(wAddr, wData)    IX_OSAL_WRITE_LONG_RAW(wAddr, wData)
-#define IX_OSAL_WRITE_BE_SHARED_SHORT(sAddr, sData)   IX_OSAL_WRITE_SHORT_RAW(IX_OSAL_SWAP_SHORT_ADDRESS(sAddr), sData)
-#define IX_OSAL_WRITE_BE_SHARED_BYTE(bAddr, bData)    IX_OSAL_WRITE_BYTE_RAW(IX_OSAL_SWAP_BYTE_ADDRESS(bAddr), bData)
-
-#define IX_OSAL_SWAP_BE_SHARED_LONG(wData)            (wData)
-#define IX_OSAL_SWAP_BE_SHARED_SHORT(sData)           (sData)
-#define IX_OSAL_SWAP_BE_SHARED_BYTE(bData)            (bData)
-
-#elif defined (IX_SDRAM_LE_DATA_COHERENT)
-
-#define IX_OSAL_READ_BE_SHARED_LONG(wAddr)            IX_OSAL_SWAP_LONG(IX_OSAL_READ_LONG_RAW(wAddr))
-#define IX_OSAL_READ_BE_SHARED_SHORT(sAddr)           IX_OSAL_SWAP_SHORT(IX_OSAL_READ_SHORT_RAW(sAddr))
-#define IX_OSAL_READ_BE_SHARED_BYTE(bAddr)            IX_OSAL_READ_BYTE_RAW(bAddr)
-
-#define IX_OSAL_WRITE_BE_SHARED_LONG(wAddr, wData)    IX_OSAL_WRITE_LONG_RAW(wAddr, IX_OSAL_SWAP_LONG(wData))
-#define IX_OSAL_WRITE_BE_SHARED_SHORT(sAddr, sData)   IX_OSAL_WRITE_SHORT_RAW(sAddr, IX_OSAL_SWAP_SHORT(sData))
-#define IX_OSAL_WRITE_BE_SHARED_BYTE(bAddr, bData)    IX_OSAL_WRITE_BYTE_RAW(bAddr, bData)
-
-#define IX_OSAL_SWAP_BE_SHARED_LONG(wData)            IX_OSAL_SWAP_LONG(wData)
-#define IX_OSAL_SWAP_BE_SHARED_SHORT(sData)           IX_OSAL_SWAP_SHORT(sData)
-
-#endif
-
-
-#define IX_OSAL_COPY_BE_SHARED_LONG_ARRAY(wDestAddr, wSrcAddr, wCount) \
-  { \
-    UINT32 i; \
-    \
-    for ( i = 0 ; i < wCount ; i++ ) \
-    { \
-      * (((UINT32 *) wDestAddr) + i) = IX_OSAL_READ_BE_SHARED_LONG(((UINT32 *) wSrcAddr) + i); \
-    }; \
-  };
-
-#endif /* IxOsalMemAccess_H */
diff --git a/drivers/net/npe/include/IxOsalOem.h b/drivers/net/npe/include/IxOsalOem.h
deleted file mode 100644
index a1f4d21..0000000
--- a/drivers/net/npe/include/IxOsalOem.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/**
- * @file IxOsalIxpOem.h
- *
- * @brief this file contains platform-specific defines.
- * 
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsalOem_H
-#define IxOsalOem_H
-
-#include "IxOsalTypes.h"
-
-/* OS-specific header for Platform package */
-#include "IxOsalOsIxp400.h"
-
-/*
- * Platform Name
- */
-#define IX_OSAL_PLATFORM_NAME ixp400
-
-/*
- * Cache line size
- */
-#define IX_OSAL_CACHE_LINE_SIZE (32)
-
-
-/* Platform-specific fastmutex implementation */
-PUBLIC IX_STATUS ixOsalOemFastMutexTryLock (IxOsalFastMutex * mutex);
-
-/* Platform-specific init (MemMap) */
-PUBLIC IX_STATUS
-ixOsalOemInit (void);
-
-/* Platform-specific unload (MemMap) */
-PUBLIC void
-ixOsalOemUnload (void);
-
-/* Default implementations */
-
-PUBLIC UINT32
-ixOsalIxp400SharedTimestampGet (void);
-
-
-UINT32
-ixOsalIxp400SharedTimestampRateGet (void);
-
-UINT32
-ixOsalIxp400SharedSysClockRateGet (void);
-
-void
-ixOsalIxp400SharedTimeGet (IxOsalTimeval * tv);
-
-
-INT32
-ixOsalIxp400SharedLog (UINT32 level, UINT32 device, char *format, 
-                       int arg1, int arg2, int arg3, int arg4, 
-                       int arg5, int arg6);
-
-#endif /* IxOsal_Oem_H */
diff --git a/drivers/net/npe/include/IxOsalOs.h b/drivers/net/npe/include/IxOsalOs.h
deleted file mode 100644
index 6c66613..0000000
--- a/drivers/net/npe/include/IxOsalOs.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef IxOsalOs_H
-#define IxOsalOs_H
-
-#ifndef IX_OSAL_CACHED
-#error "Uncached memory not supported in linux environment"
-#endif
-
-static inline unsigned long __v2p(unsigned long v)
-{
-	if (v < 0x40000000)
-		return (v & 0xfffffff);
-	else
-		return v;
-}
-
-#define IX_OSAL_OS_MMU_VIRT_TO_PHYS(addr)        __v2p((u32)addr)
-#define IX_OSAL_OS_MMU_PHYS_TO_VIRT(addr)        (addr)
-
-/*
- * Data cache not enabled (hopefully)
- */
-#define IX_OSAL_OS_CACHE_INVALIDATE(addr, size)
-#define IX_OSAL_OS_CACHE_FLUSH(addr, size)
-#define HAL_DCACHE_INVALIDATE(addr, size)
-#define HAL_DCACHE_FLUSH(addr, size)
-
-#define __ixp42X			/* sr: U-Boot needs this define */
-
-#endif /* IxOsalOs_H */
-
diff --git a/drivers/net/npe/include/IxOsalOsAssert.h b/drivers/net/npe/include/IxOsalOsAssert.h
deleted file mode 100644
index e4c3e1f..0000000
--- a/drivers/net/npe/include/IxOsalOsAssert.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef IxOsalOsAssert_H
-#define IxOsalOsAssert_H
-
-#define IX_OSAL_OS_ASSERT(c)    if(!(c)) \
-                                { \
-                                    ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, "Assertion failure \n", 0, 0, 0, 0, 0, 0);\
-                                    while(1); \
-                                }
-
-#endif /* IxOsalOsAssert_H */
diff --git a/drivers/net/npe/include/IxOsalOsBufferMgt.h b/drivers/net/npe/include/IxOsalOsBufferMgt.h
deleted file mode 100644
index 53b9616..0000000
--- a/drivers/net/npe/include/IxOsalOsBufferMgt.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/**
- * @file IxOsalOsBufferMgt.h
- *
- * @brief vxworks-specific buffer management module definitions.
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-#ifndef IX_OSAL_OS_BUFFER_MGT_H
-#define IX_OSAL_OS_BUFFER_MGT_H
-
-/*
- * use the defaul bufferMgt provided by OSAL framework.
- */
-#define IX_OSAL_USE_DEFAULT_BUFFER_MGT
-
-#include "IxOsalBufferMgtDefault.h"
-
-#if 0  /* FIXME */
-/* Define os-specific buffer macros for subfields */
-#define IX_OSAL_OSBUF_MDATA(osBufPtr) IX_OSAL_MBUF_MDATA(osBufPtr)
-             ( ((M_BLK *) osBufPtr)->m_data )
-
-#define IX_OSAL_OSBUF_MLEN(osBufPtr) \
-             ( ((M_BLK *) osBufPtr)->m_len )
-
-#define IX_OSAL_OSBUF_PKT_LEN(osBufPtr) \
-             ( ((M_BLK *) osBufPtr)->m_pkthdr.len )
-
-#define IX_OSAL_OS_CONVERT_OSBUF_TO_IXPBUF( osBufPtr, ixpBufPtr) \
-        { \
-            IX_OSAL_MBUF_OSBUF_PTR( (IX_OSAL_MBUF *) ixpBufPtr) = (void *) osBufPtr; \
-            IX_OSAL_MBUF_MDATA((IX_OSAL_MBUF *) ixpBufPtr) =  IX_OSAL_OSBUF_MDATA(osBufPtr); \
-            IX_OSAL_MBUF_PKT_LEN((IX_OSAL_MBUF *) ixpBufPtr) = IX_OSAL_OSBUF_PKT_LEN(osBufPtr); \
-            IX_OSAL_MBUF_MLEN((IX_OSAL_MBUF *) ixpBufPtr) = IX_OSAL_OSBUF_MLEN(osBufPtr); \
-        }
-
-#define IX_OSAL_OS_CONVERT_IXPBUF_TO_OSBUF( ixpBufPtr, osBufPtr) \
-        { \
-            if (ixpBufPtr == NULL) \
-            { /* Do nothing */ } \
-            else \
-            { \
-                (M_BLK *) osBufPtr = (M_BLK *) IX_OSAL_MBUF_OSBUF_PTR((IX_OSAL_MBUF *) ixpBufPtr); \
-                if (osBufPtr == NULL) \
-                { /* Do nothing */ } \
-                else \
-                { \
-                    IX_OSAL_OSBUF_MLEN(osBufPtr) =IX_OSAL_MBUF_MLEN((IX_OSAL_MBUF *) ixpBufPtr); \
-                    IX_OSAL_OSBUF_PKT_LEN(osBufPtr) =IX_OSAL_MBUF_PKT_LEN((IX_OSAL_MBUF *) ixpBufPtr); \
-                } \
-            } \
-        }
-
-#endif /* FIXME */
-
-#endif /* #define IX_OSAL_OS_BUFFER_MGT_H */
diff --git a/drivers/net/npe/include/IxOsalOsIxp400.h b/drivers/net/npe/include/IxOsalOsIxp400.h
deleted file mode 100644
index 104c733..0000000
--- a/drivers/net/npe/include/IxOsalOsIxp400.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/**
- * @file IxOsalOsIxp400.h
- *
- * @brief OS and platform specific definitions
- *
- * Design Notes:
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsalOsIxp400_H
-#define IxOsalOsIxp400_H
-
-#define BIT(x) (1<<(x))
-
-#define IXP425_EthA_BASE	0xc8009000
-#define IXP425_EthB_BASE	0xc800a000
-
-#define IXP425_PSMA_BASE	0xc8006000
-#define IXP425_PSMB_BASE	0xc8007000
-#define IXP425_PSMC_BASE	0xc8008000
-
-#define IXP425_PERIPHERAL_BASE	0xc8000000
-
-#define IXP425_QMGR_BASE	0x60000000
-#define IXP425_OSTS		0xC8005000
-
-#define IXP425_INT_LVL_NPEA	0
-#define IXP425_INT_LVL_NPEB	1
-#define IXP425_INT_LVL_NPEC	2
-
-#define IXP425_INT_LVL_QM1	3
-#define IXP425_INT_LVL_QM2	4
-
-#define IXP425_EXPANSION_BUS_BASE1	0x50000000
-#define IXP425_EXPANSION_BUS_BASE2	0x50000000
-#define IXP425_EXPANSION_BUS_CS1_BASE	0x51000000
-
-#define IXP425_EXP_CONFIG_BASE		0xC4000000
-
-/* physical addresses to be used when requesting memory with IX_OSAL_MEM_MAP */
-#define IX_OSAL_IXP400_INTC_PHYS_BASE          IXP425_INTC_BASE
-#define IX_OSAL_IXP400_GPIO_PHYS_BASE          IXP425_GPIO_BASE
-#define IX_OSAL_IXP400_UART1_PHYS_BASE         IXP425_UART1_BASE
-#define IX_OSAL_IXP400_UART2_PHYS_BASE         IXP425_UART2_BASE
-#define IX_OSAL_IXP400_ETHA_PHYS_BASE          IXP425_EthA_BASE
-#define IX_OSAL_IXP400_ETHB_PHYS_BASE          IXP425_EthB_BASE
-#define IX_OSAL_IXP400_NPEA_PHYS_BASE          IXP425_NPEA_BASE
-#define IX_OSAL_IXP400_NPEB_PHYS_BASE          IXP425_NPEB_BASE
-#define IX_OSAL_IXP400_NPEC_PHYS_BASE          IXP425_NPEC_BASE
-#define IX_OSAL_IXP400_PERIPHERAL_PHYS_BASE    IXP425_PERIPHERAL_BASE
-#define IX_OSAL_IXP400_QMGR_PHYS_BASE          IXP425_QMGR_BASE
-#define IX_OSAL_IXP400_OSTS_PHYS_BASE          IXP425_TIMER_BASE
-#define IX_OSAL_IXP400_USB_PHYS_BASE           IXP425_USB_BASE
-#define IX_OSAL_IXP400_EXP_CFG_PHYS_BASE       IXP425_EXP_CFG_BASE
-#define IX_OSAL_IXP400_EXP_BUS_PHYS_BASE       IXP425_EXP_BUS_BASE2
-#define IX_OSAL_IXP400_EXP_BUS_BOOT_PHYS_BASE  IXP425_EXP_BUS_BASE1
-#define IX_OSAL_IXP400_EXP_BUS_CS0_PHYS_BASE   IXP425_EXP_BUS_CS0_BASE
-#define IX_OSAL_IXP400_EXP_BUS_CS1_PHYS_BASE   IXP425_EXP_BUS_CS1_BASE
-#define IX_OSAL_IXP400_EXP_BUS_CS4_PHYS_BASE   IXP425_EXP_BUS_CS4_BASE
-#define IX_OSAL_IXP400_EXP_BUS_REGS_PHYS_BASE  IXP425_EXP_CFG_BASE
-#define IX_OSAL_IXP400_PCI_CFG_PHYS_BASE       IXP425_PCI_CFG_BASE
-
-/* map sizes to be used when requesting memory with IX_OSAL_MEM_MAP */
-#define IX_OSAL_IXP400_QMGR_MAP_SIZE        (0x4000)	 /**< Queue Manager map size */
-#define IX_OSAL_IXP400_PERIPHERAL_MAP_SIZE  (0xC000)	 /**< Peripheral space map size */
-#define IX_OSAL_IXP400_UART1_MAP_SIZE       (0x1000)	 /**< UART1 map size */
-#define IX_OSAL_IXP400_UART2_MAP_SIZE       (0x1000)	 /**< UART2 map size */
-#define IX_OSAL_IXP400_PMU_MAP_SIZE         (0x1000)	 /**< PMU map size */
-#define IX_OSAL_IXP400_OSTS_MAP_SIZE        (0x1000)	 /**< OS Timers map size */
-#define IX_OSAL_IXP400_NPEA_MAP_SIZE        (0x1000)	 /**< NPE A map size */
-#define IX_OSAL_IXP400_NPEB_MAP_SIZE        (0x1000)	 /**< NPE B map size */
-#define IX_OSAL_IXP400_NPEC_MAP_SIZE        (0x1000)	 /**< NPE C map size */
-#define IX_OSAL_IXP400_ETHA_MAP_SIZE        (0x1000)	 /**< Eth A map size */
-#define IX_OSAL_IXP400_ETHB_MAP_SIZE        (0x1000)	 /**< Eth B map size */
-#define IX_OSAL_IXP400_USB_MAP_SIZE         (0x1000)	 /**< USB map size */
-#define IX_OSAL_IXP400_GPIO_MAP_SIZE        (0x1000)	 /**< GPIO map size */
-#define IX_OSAL_IXP400_EXP_REG_MAP_SIZE     (0x1000)	 /**< Exp Bus Config Registers map size */
-#define IX_OSAL_IXP400_EXP_BUS_MAP_SIZE     (0x08000000) /**< Expansion bus map size */
-#define IX_OSAL_IXP400_EXP_BUS_CS0_MAP_SIZE (0x01000000) /**< CS0 map size */
-#define IX_OSAL_IXP400_EXP_BUS_CS1_MAP_SIZE (0x01000000) /**< CS1 map size */
-#define IX_OSAL_IXP400_EXP_BUS_CS4_MAP_SIZE (0x01000000) /**< CS4 map size */
-#define IX_OSAL_IXP400_PCI_CFG_MAP_SIZE     (0x1000)	 /**< PCI Bus Config Registers map size */
-
-#define IX_OSAL_IXP400_EXP_FUSE             (IXP425_EXP_CONFIG_BASE + 0x28)
-#define IX_OSAL_IXP400_ETH_NPEA_PHYS_BASE   0xC800C000
-#define IX_OSAL_IXP400_ETH_NPEA_MAP_SIZE    0x1000
-
-/*
- * Interrupt Levels
- */
-#define IX_OSAL_IXP400_NPEA_IRQ_LVL		(0)
-#define IX_OSAL_IXP400_NPEB_IRQ_LVL		(1)
-#define IX_OSAL_IXP400_NPEC_IRQ_LVL		(2)
-#define IX_OSAL_IXP400_QM1_IRQ_LVL		(3)
-#define IX_OSAL_IXP400_QM2_IRQ_LVL		(4)
-#define IX_OSAL_IXP400_TIMER1_IRQ_LVL		(5)
-#define IX_OSAL_IXP400_GPIO0_IRQ_LVL		(6)
-#define IX_OSAL_IXP400_GPIO1_IRQ_LVL		(7)
-#define IX_OSAL_IXP400_PCI_INT_IRQ_LVL		(8)
-#define IX_OSAL_IXP400_PCI_DMA1_IRQ_LVL		(9)
-#define IX_OSAL_IXP400_PCI_DMA2_IRQ_LVL		(10)
-#define IX_OSAL_IXP400_TIMER2_IRQ_LVL		(11)
-#define IX_OSAL_IXP400_USB_IRQ_LVL		(12)
-#define IX_OSAL_IXP400_UART2_IRQ_LVL		(13)
-#define IX_OSAL_IXP400_TIMESTAMP_IRQ_LVL	(14)
-#define IX_OSAL_IXP400_UART1_IRQ_LVL		(15)
-#define IX_OSAL_IXP400_WDOG_IRQ_LVL		(16)
-#define IX_OSAL_IXP400_AHB_PMU_IRQ_LVL		(17)
-#define IX_OSAL_IXP400_XSCALE_PMU_IRQ_LVL	(18)
-#define IX_OSAL_IXP400_GPIO2_IRQ_LVL		(19)
-#define IX_OSAL_IXP400_GPIO3_IRQ_LVL		(20)
-#define IX_OSAL_IXP400_GPIO4_IRQ_LVL		(21)
-#define IX_OSAL_IXP400_GPIO5_IRQ_LVL		(22)
-#define IX_OSAL_IXP400_GPIO6_IRQ_LVL		(23)
-#define IX_OSAL_IXP400_GPIO7_IRQ_LVL		(24)
-#define IX_OSAL_IXP400_GPIO8_IRQ_LVL		(25)
-#define IX_OSAL_IXP400_GPIO9_IRQ_LVL		(26)
-#define IX_OSAL_IXP400_GPIO10_IRQ_LVL		(27)
-#define IX_OSAL_IXP400_GPIO11_IRQ_LVL		(28)
-#define IX_OSAL_IXP400_GPIO12_IRQ_LVL		(29)
-#define IX_OSAL_IXP400_SW_INT1_IRQ_LVL		(30)
-#define IX_OSAL_IXP400_SW_INT2_IRQ_LVL		(31)
-
-/* USB interrupt level mask */
-#define IX_OSAL_IXP400_INT_LVL_USB             IRQ_IXP425_USB
-
-/* USB IRQ */
-#define IX_OSAL_IXP400_USB_IRQ                 IRQ_IXP425_USB
-
-/*
- * OS name retrieval
- */
-#define IX_OSAL_OEM_OS_NAME_GET(name, limit) \
-ixOsalOsIxp400NameGet((INT8*)(name), (INT32) (limit))
-
-/*
- * OS version retrieval
- */
-#define IX_OSAL_OEM_OS_VERSION_GET(version, limit) \
-ixOsalOsIxp400VersionGet((INT8*)(version), (INT32) (limit))
-
-/*
- * Function to retrieve the OS name
- */
-PUBLIC IX_STATUS ixOsalOsIxp400NameGet(INT8* osName, INT32 maxSize);
-
-/*
- * Function to retrieve the OS version
- */
-PUBLIC IX_STATUS ixOsalOsIxp400VersionGet(INT8* osVersion, INT32 maxSize);
-
-/*
- * TimestampGet
- */
-PUBLIC UINT32 ixOsalOsIxp400TimestampGet (void);
-
-/*
- * Timestamp
- */
-#define IX_OSAL_OEM_TIMESTAMP_GET ixOsalOsIxp400TimestampGet
-
-
-/*
- * Timestamp resolution
- */
-PUBLIC UINT32 ixOsalOsIxp400TimestampResolutionGet (void);
-
-#define IX_OSAL_OEM_TIMESTAMP_RESOLUTION_GET ixOsalOsIxp400TimestampResolutionGet
-
-/*
- * Retrieves the system clock rate
- */
-PUBLIC UINT32 ixOsalOsIxp400SysClockRateGet (void);
-
-#define IX_OSAL_OEM_SYS_CLOCK_RATE_GET ixOsalOsIxp400SysClockRateGet
-
-/*
- * required by FS but is not really platform-specific.
- */
-#define IX_OSAL_OEM_TIME_GET(pTv) ixOsalTimeGet(pTv)
-
-
-
-/* linux map/unmap functions */
-PUBLIC void ixOsalLinuxMemMap (IxOsalMemoryMap * map);
-
-PUBLIC void ixOsalLinuxMemUnmap (IxOsalMemoryMap * map);
-
-
-/*********************
- *	Memory map
- ********************/
-
-/* Global memmap only visible to IO MEM module */
-
-#ifdef IxOsalIoMem_C
-
-IxOsalMemoryMap ixOsalGlobalMemoryMap[] = {
-     {
-     /* Global BE and LE_AC map */
-     IX_OSAL_STATIC_MAP,	/* type            */
-     0x00000000,		/* physicalAddress */
-     0x30000000,		/* size            */
-     0x00000000,		/* virtualAddress  */
-     NULL,			/* mapFunction     */
-     NULL,			/* unmapFunction   */
-     0,				/* refCount        */
-     IX_OSAL_BE | IX_OSAL_LE_AC,/* endianType      */
-     "global_low"		/* name            */
-     },
-
-    /* SDRAM LE_DC alias */
-    {
-     IX_OSAL_STATIC_MAP,	/* type            */
-     0x00000000,		/* physicalAddress */
-     0x10000000,		/* size            */
-     0x30000000,		/* virtualAddress  */
-     NULL,			/* mapFunction     */
-     NULL,			/* unmapFunction   */
-     0,				/* refCount        */
-     IX_OSAL_LE_DC,		/* endianType      */
-     "sdram_dc"			/* name            */
-     },
-
-    /* QMGR LE_DC alias */
-    {
-     IX_OSAL_STATIC_MAP,	/* type            */
-     0x60000000,		/* physicalAddress */
-     0x00100000,		/* size            */
-     0x60000000,		/* virtualAddress  */
-     NULL,			/* mapFunction     */
-     NULL,			/* unmapFunction   */
-     0,				/* refCount        */
-     IX_OSAL_LE_DC,		/* endianType      */
-     "qmgr_dc"			/* name            */
-     },
-
-    /* QMGR BE alias */
-    {
-     IX_OSAL_STATIC_MAP,	/* type            */
-     0x60000000,		/* physicalAddress */
-     0x00100000,		/* size            */
-     0x60000000,		/* virtualAddress  */
-     NULL,			/* mapFunction     */
-     NULL,			/* unmapFunction   */
-     0,				/* refCount        */
-     IX_OSAL_BE | IX_OSAL_LE_AC,/* endianType      */
-     "qmgr_be"			/* name            */
-     },
-
-    /* Global BE and LE_AC map */
-    {
-     IX_OSAL_STATIC_MAP,	/* type            */
-     0x40000000,		/* physicalAddress */
-     0x20000000,		/* size            */
-     0x40000000,		/* virtualAddress  */
-     NULL,			/* mapFunction     */
-     NULL,			/* unmapFunction   */
-     0,				/* refCount        */
-     IX_OSAL_BE | IX_OSAL_LE_AC,/* endianType      */
-     "Misc Cfg"			/* name            */
-     },
-
-    /* Global BE and LE_AC map */
-    {
-     IX_OSAL_STATIC_MAP,	/* type            */
-     0x70000000,		/* physicalAddress */
-     0x8FFFFFFF,		/* size            */
-     0x70000000,		/* virtualAddress  */
-     NULL,			/* mapFunction     */
-     NULL,			/* unmapFunction   */
-     0,				/* refCount        */
-     IX_OSAL_BE | IX_OSAL_LE_AC,/* endianType      */
-     "Exp Cfg"			/* name            */
-     },
-};
-
-#endif /* IxOsalIoMem_C */
-#endif /* #define IxOsalOsIxp400_H */
diff --git a/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h b/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h
deleted file mode 100644
index e037823..0000000
--- a/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h
+++ /dev/null
@@ -1,380 +0,0 @@
-/**
- * @file IxOsalOsIxp400CustomizedMapping.h 
- *
- * @brief Set LE coherency modes for components. 
- *        The default setting is IX_OSAL_NO_MAPPING for LE.
- * 
- *
- *		  By default IX_OSAL_STATIC_MEMORY_MAP is defined for all the components.
- *		  If any component uses a dynamic memory map it must define
- *		  IX_OSAL_DYNAMIC_MEMORY_MAP in its corresponding section.
- *        
- *
- * @par
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsalOsIxp400CustomizedMapping_H
-#define IxOsalOsIxp400CustomizedMapping_H
-
-/*
- * only include this file in Little Endian
- */
-
-#if defined (IX_OSAL_LINUX_BE)
-#error Only include IxOsalOsIxp400CustomizedMapping.h in Little Endian
-#endif
-
- /*
-  * Components don't have to be in this list if
-  * the default mapping is OK.
-  */
-#define ix_osal                1
-#define ix_dmaAcc              2
-#define ix_atmdAcc             3
-
-#define ix_atmsch              5
-#define ix_ethAcc              6
-#define ix_npeMh               7
-#define ix_qmgr                8
-#define ix_npeDl               9
-#define ix_atmm                10
-#define ix_hssAcc              11
-#define ix_ethDB               12
-#define ix_ethMii              13
-#define ix_timerCtrl           14
-#define ix_adsl                15
-#define ix_usb                 16
-#define ix_uartAcc             17
-#define ix_featureCtrl         18
-#define ix_cryptoAcc           19
-#define ix_unloadAcc           33
-#define ix_perfProfAcc         34
-#define ix_parityENAcc                 49
-#define ix_sspAcc                      51
-#define ix_timeSyncAcc                 52
-#define ix_i2c                         53
-
-#define ix_codelets_uartAcc    21
-#define ix_codelets_timers     22
-#define ix_codelets_atm        23
-#define ix_codelets_ethAal5App 24
-#define ix_codelets_demoUtils  26
-#define ix_codelets_usb        27
-#define ix_codelets_hssAcc     28
-#define ix_codelets_dmaAcc         40
-#define ix_codelets_cryptoAcc	   41
-#define ix_codelets_perfProfAcc    42
-#define ix_codelets_ethAcc         43
-#define ix_codelets_parityENAcc        54
-#define ix_codelets_timeSyncAcc        55
-
-
-#endif /* IxOsalOsIxp400CustomizedMapping_H */
-
-
-/***************************
- * osal
- ***************************/
-#if (IX_COMPONENT_NAME == ix_osal)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* osal */
-
-/***************************
- * dmaAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_dmaAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* dmaAcc */
-
-/***************************
- * atmdAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_atmdAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* atmdAcc */
-
-/***************************
- * atmsch
- ***************************/
-#if (IX_COMPONENT_NAME == ix_atmsch)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* atmsch */
-
-/***************************
- * ethAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_ethAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* ethAcc */
-
-/***************************
- * npeMh
- ***************************/
-#if (IX_COMPONENT_NAME == ix_npeMh)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* npeMh */
-
-/***************************
- * qmgr
- ***************************/
-#if (IX_COMPONENT_NAME == ix_qmgr)
-
-#define IX_OSAL_LE_DC_MAPPING
-
-#endif /* qmgr */
-
-/***************************
- * npeDl
- ***************************/
-#if (IX_COMPONENT_NAME == ix_npeDl)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* npeDl */
-
-/***************************
- * atmm
- ***************************/
-#if (IX_COMPONENT_NAME == ix_atmm)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* atmm */
-
-/***************************
- * ethMii
- ***************************/
-#if (IX_COMPONENT_NAME == ix_ethMii)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* ethMii */
-
-
-/***************************
- * adsl
- ***************************/
-#if (IX_COMPONENT_NAME == ix_adsl)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* adsl */
-
-/***************************
- * usb
- ***************************/
-#if (IX_COMPONENT_NAME == ix_usb)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* usb */
-
-/***************************
- * uartAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_uartAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* uartAcc */
-
-/***************************
- * featureCtrl
- ***************************/
-#if (IX_COMPONENT_NAME == ix_featureCtrl)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* featureCtrl */
-
-/***************************
- * cryptoAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_cryptoAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* cryptoAcc */
-
-/***************************
- * codelets_usb
- ***************************/
-#if (IX_COMPONENT_NAME == ix_codelets_usb)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* codelets_usb */
-
-
-/***************************
- * codelets_uartAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_codelets_uartAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* codelets_uartAcc */
-
-
-
-/***************************
- * codelets_timers
- ***************************/
-#if (IX_COMPONENT_NAME == ix_codelets_timers)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* codelets_timers */
-
-/***************************
- * codelets_atm
- ***************************/
-#if (IX_COMPONENT_NAME == ix_codelets_atm)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* codelets_atm */
-
-/***************************
- * codelets_ethAal5App
- ***************************/
-#if (IX_COMPONENT_NAME == ix_codelets_ethAal5App)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* codelets_ethAal5App */
-
-/***************************
- * codelets_ethAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_codelets_ethAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* codelets_ethAcc */
-
-
-/***************************
- * codelets_demoUtils
- ***************************/
-#if (IX_COMPONENT_NAME == ix_codelets_demoUtils)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* codelets_demoUtils */
-
-
-
-/***************************
- * perfProfAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_perfProfAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* perfProfAcc */
-
-
-/***************************
- * unloadAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_unloadAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* unloadAcc */
-
-
-
-
-
-/***************************
- * parityENAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_parityENAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* parityENAcc */
-
-/***************************
- * codelets_parityENAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_codelets_parityENAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* codelets_parityENAcc */
-
-
-
-
-/***************************
- * timeSyncAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_timeSyncAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* timeSyncAcc */
-
-
-/***************************
- * codelets_timeSyncAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_codelets_timeSyncAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* codelets_timeSyncAcc */
-
-
-
-
-/***************************
- * i2c
- ***************************/
-#if (IX_COMPONENT_NAME == ix_i2c)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* i2c */
-
-
-
-/***************************
- * sspAcc
- ***************************/
-#if (IX_COMPONENT_NAME == ix_sspAcc)
-
-#define IX_OSAL_LE_AC_MAPPING
-
-#endif /* sspAcc */
-
-
diff --git a/drivers/net/npe/include/IxOsalOsTypes.h b/drivers/net/npe/include/IxOsalOsTypes.h
deleted file mode 100644
index 272eef1..0000000
--- a/drivers/net/npe/include/IxOsalOsTypes.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef IxOsalOsTypes_H
-#define IxOsalOsTypes_H
-
-#include <asm/types.h>
-
-typedef s64 INT64;
-typedef u64 UINT64;
-typedef s32 INT32;
-typedef u32 UINT32;
-typedef s16 INT16;
-typedef u16 UINT16;
-typedef s8 INT8;
-typedef u8 UINT8;
-
-typedef u32 ULONG;
-typedef u16 USHORT;
-typedef u8 UCHAR;
-typedef u32 BOOL;
-
-#if 0 /* FIXME */
-
-/* Default stack limit is 10 KB */
-#define IX_OSAL_OS_THREAD_DEFAULT_STACK_SIZE  (10240)
-
-/* Maximum stack limit is 32 MB */
-#define IX_OSAL_OS_THREAD_MAX_STACK_SIZE      (33554432)  /* 32 MBytes */
-
-/* Default thread priority */
-#define IX_OSAL_OS_DEFAULT_THREAD_PRIORITY    (90)
-
-/* Thread maximum priority (0 - 255). 0 - highest priority */
-#define IX_OSAL_OS_MAX_THREAD_PRIORITY	      (255)
-
-#endif /* FIXME */
-
-#define IX_OSAL_OS_WAIT_FOREVER (-1L)
-#define IX_OSAL_OS_WAIT_NONE	0
-
-
-/* Thread handle is eventually an int type */
-typedef int IxOsalOsThread;
-
-/* Semaphore handle FIXME */
-typedef int IxOsalOsSemaphore;
-
-/* Mutex handle */
-typedef int IxOsalOsMutex;
-
-/*
- * Fast mutex handle - fast mutex operations are implemented in
- * native assembler code using atomic test-and-set instructions
- */
-typedef int IxOsalOsFastMutex;
-
-typedef struct
-{
-} IxOsalOsMessageQueue;
-
-
-#endif /* IxOsalOsTypes_H */
diff --git a/drivers/net/npe/include/IxOsalOsUtilitySymbols.h b/drivers/net/npe/include/IxOsalOsUtilitySymbols.h
deleted file mode 100644
index beb45a0..0000000
--- a/drivers/net/npe/include/IxOsalOsUtilitySymbols.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef IxOsalOsUtilitySymbols_H
-#define IxOsalOsUtilitySymbols_H
-
-#endif /* IxOsalOsUtilitySymbols_H */
diff --git a/drivers/net/npe/include/IxOsalTypes.h b/drivers/net/npe/include/IxOsalTypes.h
deleted file mode 100644
index aefa70f..0000000
--- a/drivers/net/npe/include/IxOsalTypes.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/**
- * @file IxOsalTypes.h
- *
- * @brief Define OSAL basic data types.
- *
- * This file contains fundamental data types used by OSAL.
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-
-#ifndef IxOsalTypes_H
-#define IxOsalTypes_H
-
-#include <config.h>
-#include <common.h>
-
-#define __ixp42X			/* sr: U-Boot needs this define */
-#define IXP425_EXP_CFG_BASE	0xC4000000
-#define diag_printf		debug
-
-#undef SIMSPARCSOLARIS
-#define SIMSPARCSOLARIS		0xaffe	/* sr: U-Boot gets confused with this solaris define */
-
-/*
- * Include the OS-specific type definitions
- */
-#include "IxOsalOsTypes.h"
-/**
- * @defgroup IxOsalTypes Osal basic data types.
- *
- * @brief Basic data types for Osal
- *
- * @{
- */
-
-/**
- * @brief OSAL status
- *
- * @note Possible OSAL return status include IX_SUCCESS and IX_FAIL.
- */
-typedef UINT32 IX_STATUS;
-
-/**
- * @brief VUINT32
- *
- * @note volatile UINT32
- */
-typedef volatile UINT32 VUINT32;
-
-/**
- * @brief VINT32
- *
- * @note volatile INT32
- */
-typedef volatile INT32 VINT32;
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_OSAL_BILLION
- *
- * @brief  Alias for 1,000,000,000
- *
- */
-#define IX_OSAL_BILLION (1000000000)
-
-#ifndef NULL
-#define NULL       0L
-#endif
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_SUCCESS
- *
- * @brief Success status
- *
- */
-#ifndef IX_SUCCESS
-#define IX_SUCCESS 0L /**< #defined as 0L */
-#endif
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_FAIL
- *
- * @brief Failure status
- *
- */
-#ifndef IX_FAIL
-#define IX_FAIL    1L /**< #defined as 1L */
-#endif
-
-
-#ifndef PRIVATE
-#ifdef IX_PRIVATE_OFF
-#define PRIVATE			/* nothing */
-#else
-#define PRIVATE static	/**< #defined as static, except for debug builds */
-#endif /* IX_PRIVATE_OFF */
-#endif /* PRIVATE */
-
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_OSAL_INLINE
- *
- * @brief Alias for __inline
- *
- */
-#ifndef IX_OSAL_INLINE
-#define IX_OSAL_INLINE __inline
-#endif /* IX_OSAL_INLINE */
-
-
-#ifndef __inline__
-#define __inline__	IX_OSAL_INLINE
-#endif
-
-
-/* Each OS can define its own PUBLIC, otherwise it will be empty. */
-#ifndef PUBLIC
-#define PUBLIC
-#endif /* PUBLIC */
-
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_OSAL_INLINE_EXTERN
- *
- * @brief Alias for __inline extern
- *
- */
-#ifndef IX_OSAL_INLINE_EXTERN
-#define IX_OSAL_INLINE_EXTERN IX_OSAL_INLINE extern
-#endif
-
-/**
- * @ingroup IxOsalTypes
- * @enum IxOsalLogDevice
- * @brief This is an emum for OSAL log devices.
- */
-typedef enum
-{
-    IX_OSAL_LOG_DEV_STDOUT = 0,	       /**< standard output (implemented by default) */
-    IX_OSAL_LOG_DEV_STDERR = 1,	       /**< standard error (implemented */
-    IX_OSAL_LOG_DEV_HEX_DISPLAY = 2,   /**< hexadecimal display (not implemented) */
-    IX_OSAL_LOG_DEV_ASCII_DISPLAY = 3  /**< ASCII-capable display (not implemented) */
-} IxOsalLogDevice;
-
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_OSAL_LOG_ERROR
- *
- * @brief Alias for -1, used as log function error status
- *
- */
-#define IX_OSAL_LOG_ERROR (-1)
-
-/**
- * @ingroup IxOsalTypes
- * @enum IxOsalLogLevel
- * @brief This is an emum for OSAL log trace level.
- */
-typedef enum
-{
-    IX_OSAL_LOG_LVL_NONE = 0,	 /**<No trace level */
-    IX_OSAL_LOG_LVL_USER = 1,	 /**<Set trace level to user */
-    IX_OSAL_LOG_LVL_FATAL = 2,	 /**<Set trace level to fatal */
-    IX_OSAL_LOG_LVL_ERROR = 3,	 /**<Set trace level to error */
-    IX_OSAL_LOG_LVL_WARNING = 4, /**<Set trace level to warning */
-    IX_OSAL_LOG_LVL_MESSAGE = 5, /**<Set trace level to message */
-    IX_OSAL_LOG_LVL_DEBUG1 = 6,	 /**<Set trace level to debug1 */
-    IX_OSAL_LOG_LVL_DEBUG2 = 7,	 /**<Set trace level to debug2 */
-    IX_OSAL_LOG_LVL_DEBUG3 = 8,	 /**<Set trace level to debug3 */
-    IX_OSAL_LOG_LVL_ALL	/**<Set trace level to all */
-} IxOsalLogLevel;
-
-
-/**
- * @ingroup IxOsalTypes
- * @brief Void function pointer prototype
- *
- * @note accepts a void pointer parameter
- * and does not return a value.
- */
-typedef void (*IxOsalVoidFnVoidPtr) (void *);
-
-typedef void (*IxOsalVoidFnPtr) (void);
-
-
-/**
- * @brief Timeval structure
- *
- * @note Contain subfields of seconds and nanoseconds..
- */
-typedef struct
-{
-    UINT32 secs;		/**< seconds */
-    UINT32 nsecs;		/**< nanoseconds */
-} IxOsalTimeval;
-
-
-/**
- * @ingroup IxOsalTypes
- * @brief IxOsalTimer
- *
- * @note OSAL timer handle
- *
- */
-typedef UINT32 IxOsalTimer;
-
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_OSAL_WAIT_FOREVER
- *
- * @brief Definition for timeout forever, OS-specific.
- *
- */
-#define IX_OSAL_WAIT_FOREVER IX_OSAL_OS_WAIT_FOREVER
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_OSAL_WAIT_NONE
- *
- * @brief Definition for timeout 0, OS-specific.
- *
- */
-#define IX_OSAL_WAIT_NONE    IX_OSAL_OS_WAIT_NONE
-
-
-/**
- * @ingroup IxOsalTypes
- * @brief IxOsalMutex
- *
- * @note Mutex handle, OS-specific
- *
- */
-typedef IxOsalOsMutex IxOsalMutex;
-
-/**
- * @ingroup IxOsalTypes
- * @brief IxOsalFastMutex
- *
- * @note FastMutex handle, OS-specific
- *
- */
-typedef IxOsalOsFastMutex IxOsalFastMutex;
-
-/**
- * @ingroup IxOsalTypes
- * @brief IxOsalThread
- *
- * @note Thread handle, OS-specific
- *
- */
-typedef IxOsalOsThread IxOsalThread;
-
-/**
- * @ingroup IxOsalTypes
- * @brief IxOsalSemaphore
- *
- * @note Semaphore handle, OS-specific
- *
- */
-typedef IxOsalOsSemaphore IxOsalSemaphore;
-
-/**
- * @ingroup IxOsalTypes
- * @brief IxOsalMessageQueue
- *
- * @note Message Queue handle, OS-specific
- *
- */
-typedef IxOsalOsMessageQueue IxOsalMessageQueue;
-
-
-/**
- * @brief Thread Attribute
- * @note Default thread attribute
- */
-typedef struct
-{
-    char *name;        /**< name */
-    UINT32 stackSize;  /**< stack size */
-    UINT32 priority;   /**< priority */
-} IxOsalThreadAttr;
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_OSAL_THREAD_DEFAULT_STACK_SIZE
- *
- * @brief Default thread stack size, OS-specific.
- *
- */
-#define IX_OSAL_THREAD_DEFAULT_STACK_SIZE (IX_OSAL_OS_THREAD_DEFAULT_STACK_SIZE)
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_OSAL_THREAD_MAX_STACK_SIZE
- *
- * @brief Max stack size, OS-specific.
- *
- */
-#define IX_OSAL_THREAD_MAX_STACK_SIZE (IX_OSAL_OS_THREAD_MAX_STACK_SIZE)
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_OSAL_DEFAULT_THREAD_PRIORITY
- *
- * @brief Default thread priority, OS-specific.
- *
- */
-#define IX_OSAL_DEFAULT_THREAD_PRIORITY (IX_OSAL_OS_DEFAULT_THREAD_PRIORITY)
-
-/**
- * @ingroup IxOsalTypes
- *
- * @def IX_OSAL_MAX_THREAD_PRIORITY
- *
- * @brief Max thread priority, OS-specific.
- *
- */
-#define IX_OSAL_MAX_THREAD_PRIORITY (IX_OSAL_OS_MAX_THREAD_PRIORITY)
-
-/**
- * @} IxOsalTypes
- */
-
-
-#endif /* IxOsalTypes_H */
diff --git a/drivers/net/npe/include/IxOsalUtilitySymbols.h b/drivers/net/npe/include/IxOsalUtilitySymbols.h
deleted file mode 100644
index ec34df6..0000000
--- a/drivers/net/npe/include/IxOsalUtilitySymbols.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/**
- * @file
- *
- * @brief OSAL Configuration header file
- * 
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxOsalUtilitySymbols_H
-#define IxOsalUtilitySymbols_H
-
-#include "IxOsalOsUtilitySymbols.h"	/* OS-specific utility symbol definitions */
-
-#endif /* IxOsalUtilitySymbols_H */
diff --git a/drivers/net/npe/include/IxParityENAcc.h b/drivers/net/npe/include/IxParityENAcc.h
deleted file mode 100644
index 4d44838..0000000
--- a/drivers/net/npe/include/IxParityENAcc.h
+++ /dev/null
@@ -1,761 +0,0 @@
-/**
- * @file IxParityENAcc.h
- *
- * @author Intel Corporation
- * @date 24 Mar 2004
- *
- * @brief This file contains the public API for the IXP400 Parity Error 
- * Notifier access component.
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxParityENAcc IXP400 Parity Error Notifier (IxParityENAcc) API
- *
- * @brief The public API for the Parity Error Notifier 
- * 
- * @{
- */
-
-#ifndef IXPARITYENACC_H
-#define IXPARITYENACC_H
-
-#ifdef __ixp46X
-
-#include "IxOsal.h"
-
-/*
- * #defines for function return types, etc.
- */
-
-/**
- * @ingroup IxParityENAcc
- *
- * @enum IxParityENAccStatus
- *
- * @brief The status as returend from the API
- */
-typedef enum /**< IxParityENAccStatus */
-{
-  IX_PARITYENACC_SUCCESS = IX_SUCCESS, /**< The request is successful */
-  IX_PARITYENACC_INVALID_PARAMETERS,   /**< Invalid or NULL parameters passed */
-  IX_PARITYENACC_NOT_INITIALISED,      /**< Access layer has not been initialised before accessing the APIs */
-  IX_PARITYENACC_ALREADY_INITIALISED,  /**< Access layer has already been initialised */ 
-  IX_PARITYENACC_OPERATION_FAILED,     /**< Operation did not succeed due to hardware failure */
-  IX_PARITYENACC_NO_PARITY             /**< No parity condition exits or has already been cleared */
-} IxParityENAccStatus;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @enum IxParityENAccParityType
- * 
- * @brief Odd or Even Parity Type
- */
-typedef enum  /**< IxParityENAccParityType */
-{
-  IX_PARITYENACC_EVEN_PARITY,    /**< Even Parity */
-  IX_PARITYENACC_ODD_PARITY      /**< Odd Parity */
-} IxParityENAccParityType;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @enum IxParityENAccConfigOption
- *
- * @brief The parity error enable/disable configuration option
- */
-typedef enum /**< IxParityENAccConfigOption */
-{
-  IX_PARITYENACC_DISABLE,       /**< Disable parity error detection */
-  IX_PARITYENACC_ENABLE         /**< Enable parity error detection */
-} IxParityENAccConfigOption;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @struct IxParityENAccNpeConfig
- *
- * @brief NPE parity detection is to be enabled/disabled
- */
-typedef struct /**< IxParityENAccNpeConfig */
-{
-  IxParityENAccConfigOption ideEnabled; /**< NPE IMem, DMem and External */
-  IxParityENAccParityType parityOddEven; /**< Parity - Odd or Even */
-} IxParityENAccNpeConfig ;
-
-
-/**
- * @ingroup IxParityENAcc
- *
- * @struct IxParityENAccMcuConfig
- *
- * @brief MCU pairty detection is to be enabled/disabled
- */
-typedef struct /**< IxParityENAccMcuConfig */ 
-{
-  IxParityENAccConfigOption singlebitDetectEnabled;      /**< Single-bit parity error detection */
-  IxParityENAccConfigOption singlebitCorrectionEnabled;  /**< Single-bit parity error correction */
-  IxParityENAccConfigOption multibitDetectionEnabled;    /**< Multi-bit  parity error detection */
-} IxParityENAccMcuConfig ;
-
-
-/**
- * @ingroup IxParityENAcc
- *
- * @struct IxParityENAccEbcConfig
- *
- * @brief Expansion Bus Controller parity detection is to be enabled or disabled 
- *
- * Note: All the Chip Select(s) and External Masters will have the same parity
- */
-typedef struct /**< IxParityENAccEbcConfig */
-{
-  IxParityENAccConfigOption ebcCs0Enabled;    /**< Expansion Bus Controller - Chip Select 0 */
-  IxParityENAccConfigOption ebcCs1Enabled;    /**< Expansion Bus Controller - Chip Select 1 */
-  IxParityENAccConfigOption ebcCs2Enabled;    /**< Expansion Bus Controller - Chip Select 2 */
-  IxParityENAccConfigOption ebcCs3Enabled;    /**< Expansion Bus Controller - Chip Select 3 */
-  IxParityENAccConfigOption ebcCs4Enabled;    /**< Expansion Bus Controller - Chip Select 4 */
-  IxParityENAccConfigOption ebcCs5Enabled;    /**< Expansion Bus Controller - Chip Select 5 */
-  IxParityENAccConfigOption ebcCs6Enabled;    /**< Expansion Bus Controller - Chip Select 6 */
-  IxParityENAccConfigOption ebcCs7Enabled;    /**< Expansion Bus Controller - Chip Select 7 */
-  IxParityENAccConfigOption ebcExtMstEnabled; /**< External Master on Expansion bus */
-  IxParityENAccParityType parityOddEven;      /**< Parity - Odd or Even */
-} IxParityENAccEbcConfig ;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @struct IxParityENAccHWParityConfig
- *
- * @brief Parity error configuration of the Hardware Blocks
- */
-typedef struct /**< IxParityENAccHWParityConfig */
-{ 
-  IxParityENAccNpeConfig npeAConfig;     /**< NPE A parity detection is to be enabled/disabled */
-  IxParityENAccNpeConfig npeBConfig;     /**< NPE B parity detection is to be enabled/disabled */
-  IxParityENAccNpeConfig npeCConfig;     /**< NPE C parity detection is to be enabled/disabled */
-  IxParityENAccMcuConfig mcuConfig;      /**< MCU pairty detection is to be enabled/disabled */
-  IxParityENAccConfigOption swcpEnabled; /**< SWCP parity detection is to be enabled */
-  IxParityENAccConfigOption aqmEnabled;  /**< AQM parity detection is to be enabled */
-  IxParityENAccEbcConfig ebcConfig;      /**< Expansion Bus Controller parity detection is to be enabled/disabled */
-} IxParityENAccHWParityConfig;
-
-
-/**
- * @ingroup IxParityENAcc
- *
- * @struct IxParityENAccNpeParityErrorStats
- *
- * @brief NPE parity error statistics
- */
-typedef struct  /* IxParityENAccNpeParityErrorStats */
-{
-  UINT32 parityErrorsIMem;         /**< Parity errors in Instruction Memory */
-  UINT32 parityErrorsDMem;         /**< Parity errors in Data Memory */
-  UINT32 parityErrorsExternal;     /**< Parity errors in NPE External Entities */
-} IxParityENAccNpeParityErrorStats;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @struct IxParityENAccMcuParityErrorStats
- *
- * @brief DDR Memory Control Unit parity error statistics
- * 
- * Note: There could be two outstanding parity errors at any given time whose address
- * details captured. If there is no room for the new interrupt then it would be treated
- * as overflow parity condition.
- */
-typedef struct  /* IxParityENAccMcuParityErrorStats */
-{
-  UINT32 parityErrorsSingleBit;    /**< Parity errors of the type Single-Bit */
-  UINT32 parityErrorsMultiBit;     /**< Parity errors of the type Multi-Bit */
-  UINT32 parityErrorsOverflow;     /**< Parity errors when more than two parity errors occured */
-} IxParityENAccMcuParityErrorStats;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @struct IxParityENAccEbcParityErrorStats
- *
- * @brief Expansion Bus Controller parity error statistics
- */
-typedef struct  /* IxParityENAccEbcParityErrorStats */
-{
-  UINT32 parityErrorsInbound;      /**< Odd bit parity errors on inbound transfers */
-  UINT32 parityErrorsOutbound;     /**< Odd bit parity errors on outbound transfers */
-} IxParityENAccEbcParityErrorStats;
-
-
-/**
- * @ingroup IxParityENAcc
- *
- * @struct IxParityENAccParityErrorStats
- *
- * @brief Parity Error Statistics for the all the hardware blocks
- */
-typedef struct  /**< IxParityENAccParityErrorStats */
-{
-  IxParityENAccNpeParityErrorStats  npeStats;  /**< NPE parity error statistics */
-  IxParityENAccMcuParityErrorStats  mcuStats;  /**< MCU parity error statistics */
-  IxParityENAccEbcParityErrorStats  ebcStats;  /**< EBC parity error statistics */
-  UINT32                            swcpStats; /**< SWCP parity error statistics */
-  UINT32                            aqmStats;  /**< AQM parity error statistics */
-} IxParityENAccParityErrorStats;
-
-
-/**
- * @ingroup IxParityENAcc
- *
- * @enum IxParityENAccParityErrorSource
- *
- * @brief The source of the parity error notification 
- */
-typedef enum  /**< IxParityENAccParityErrorSource  */
-{
-  IX_PARITYENACC_NPE_A_IMEM,     /**< NPE A - Instruction memory */
-  IX_PARITYENACC_NPE_A_DMEM,     /**< NPE A - Data memory */
-  IX_PARITYENACC_NPE_A_EXT,      /**< NPE A - External Entity*/
-  IX_PARITYENACC_NPE_B_IMEM,     /**< NPE B - Instruction memory */
-  IX_PARITYENACC_NPE_B_DMEM,     /**< NPE B - Data memory */
-  IX_PARITYENACC_NPE_B_EXT,      /**< NPE B - External Entity*/
-  IX_PARITYENACC_NPE_C_IMEM,     /**< NPE C - Instruction memory */
-  IX_PARITYENACC_NPE_C_DMEM,     /**< NPE C - Data memory */
-  IX_PARITYENACC_NPE_C_EXT,      /**< NPE C - External Entity*/
-  IX_PARITYENACC_SWCP,           /**< SWCP */
-  IX_PARITYENACC_AQM,            /**< AQM */
-  IX_PARITYENACC_MCU_SBIT,       /**< DDR Memory Controller Unit - Single bit parity */
-  IX_PARITYENACC_MCU_MBIT,       /**< DDR Memory Controller Unit - Multi bit parity */
-  IX_PARITYENACC_MCU_OVERFLOW,   /**< DDR Memory Controller Unit - Parity errors in excess of two */
-  IX_PARITYENACC_EBC_CS,         /**< Expansion Bus Controller - Chip Select */
-  IX_PARITYENACC_EBC_EXTMST      /**< Expansion Bus Controller - External Master */
-} IxParityENAccParityErrorSource;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @enum IxParityENAccParityErrorAccess
- *
- * @brief The type of access resulting in parity error
- */
-typedef enum  /**< IxParityENAccParityErrorAccess  */
-{
-  IX_PARITYENACC_READ,   /**< Read Access  */
-  IX_PARITYENACC_WRITE   /**< Write Access */
-} IxParityENAccParityErrorAccess;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @typedef IxParityENAccParityErrorAddress
- *
- * @brief The memory location which has parity error
- */
-typedef UINT32 IxParityENAccParityErrorAddress;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @typedef IxParityENAccParityErrorData
- *
- * @brief The data read from the memory location which has parity error
- */
-typedef UINT32 IxParityENAccParityErrorData;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @enum IxParityENAccParityErrorRequester
- *
- * @brief The requester interface through which the SDRAM memory access 
- * resulted in the parity error.
- */
-typedef enum  /**< IxParityENAccParityErrorRequester  */
-{
-  IX_PARITYENACC_MPI,     /**< Direct Memory Port Interface  */
-  IX_PARITYENACC_AHB_BUS  /**< South or North AHB Bus */
-} IxParityENAccParityErrorRequester;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @enum IxParityENAccAHBErrorMaster
- *
- * @brief The Master on the AHB bus interface whose transaction might have 
- * resulted in the parity error notification to XScale.
- */
-typedef enum  /**< IxParityENAccAHBErrorMaster */
-{
-  IX_PARITYENACC_AHBN_MST_NPE_A,       /**< NPE - A */
-  IX_PARITYENACC_AHBN_MST_NPE_B,       /**< NPE - B */
-  IX_PARITYENACC_AHBN_MST_NPE_C,       /**< NPE - C */
-  IX_PARITYENACC_AHBS_MST_XSCALE,      /**< XScale Bus Interface Unit */
-  IX_PARITYENACC_AHBS_MST_PBC,         /**< PCI Bus Controller */
-  IX_PARITYENACC_AHBS_MST_EBC,         /**< Expansion Bus Controller */
-  IX_PARITYENACC_AHBS_MST_AHB_BRIDGE,  /**< AHB Bridge */
-  IX_PARITYENACC_AHBS_MST_USBH         /**< USB Host Controller */
-} IxParityENAccAHBErrorMaster;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @enum IxParityENAccAHBErrorSlave
- *
- * @brief The Slave on the AHB bus interface whose transaction might have 
- * resulted in the parity error notification to XScale.
- */
-typedef enum  /**< IxParityENAccAHBErrorSlave */
-{
-  IX_PARITYENACC_AHBN_SLV_MCU,         /**< Memory Control Unit */
-  IX_PARITYENACC_AHBN_SLV_AHB_BRIDGE,  /**< AHB Bridge */
-  IX_PARITYENACC_AHBS_SLV_MCU,         /**< XScale Bus Interface Unit */
-  IX_PARITYENACC_AHBS_SLV_APB_BRIDGE,  /**< APB Bridge */
-  IX_PARITYENACC_AHBS_SLV_AQM,         /**< AQM */
-  IX_PARITYENACC_AHBS_SLV_RSA,         /**< RSA (Crypto Bus) */
-  IX_PARITYENACC_AHBS_SLV_PBC,         /**< PCI Bus Controller */
-  IX_PARITYENACC_AHBS_SLV_EBC,         /**< Expansion Bus Controller */
-  IX_PARITYENACC_AHBS_SLV_USBH         /**< USB Host Controller */
-} IxParityENAccAHBErrorSlave;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @struct IxParityENAccAHBErrorTransaction
- *
- * @brief The Master and Slave on the AHB bus interface whose transaction might
- * have resulted in the parity error notification to XScale.
- *
- * NOTE: This information may be used in the data abort exception handler
- * to differentiate between the XScale and non-XScale access to the SDRAM
- * memory.
- */
-typedef struct  /**< IxParityENAccAHBErrorTransaction  */
-{
-  IxParityENAccAHBErrorMaster  ahbErrorMaster; /**< Master on AHB bus */
-  IxParityENAccAHBErrorSlave   ahbErrorSlave;  /**< Slave  on AHB bus */
-} IxParityENAccAHBErrorTransaction;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @struct IxParityENAccParityErrorContextMessage
- *
- * @brief Parity Error Context Message
- */
-typedef struct /**< IxParityENAccParityErrorContextMessage */
-{
-  IxParityENAccParityErrorSource     pecParitySource; /**< Source info of parity error */
-  IxParityENAccParityErrorAccess     pecAccessType;   /**< Read or Write Access
-                                                           Read  - NPE, SWCP, AQM, DDR MCU,
-                                                                   Exp Bus Ctrlr (Outbound)
-                                                           Write - DDR MCU,
-                                                                   Exp Bus Ctrlr (Inbound 
-                                                                   i.e., External Master) */
-  IxParityENAccParityErrorAddress    pecAddress;      /**< Address faulty location
-                                                           Valid only for AQM, DDR MCU, 
-                                                           Exp Bus Ctrlr */
-  IxParityENAccParityErrorData       pecData;         /**< Data read from the faulty location
-                                                           Valid only for AQM and DDR MCU
-                                                           For DDR MCU it is the bit location
-                                                           of the Single-bit parity */
-  IxParityENAccParityErrorRequester  pecRequester;    /**< Requester of SDRAM memory access
-                                                           Valid only for the DDR MCU */
-  IxParityENAccAHBErrorTransaction   ahbErrorTran;    /**< Master and Slave information on the
-                                                           last AHB Error Transaction */
-} IxParityENAccParityErrorContextMessage;
-
-/**
- * @ingroup IxParityENAcc
- *
- * @typedef IxParityENAccCallback
- *
- * @brief This prototype shows the format of a callback function.
- *
- * The callback will be used to notify the parity error to the client application.
- * The callback will be registered  by @ref ixParityENAccCallbackRegister.
- *
- * It will be called from an ISR when a parity error is detected and thus
- * needs to follow the interrupt callable function conventions.
- *
- */
-typedef void (*IxParityENAccCallback) (void);
-
-
-/*
- * Prototypes for interface functions.
- */
-
-/**
- * @ingroup IxParityENAcc
- *
- * @fn IxParityENAccStatus ixParityENAccInit(void)
- *
- * @brief This function will initialise the IxParityENAcc component.
- *
- * This function will initialise the IxParityENAcc component. It should only be
- * called once, prior to using the IxParityENAcc component.
- *
- * <OL><LI>It initialises the internal data structures, registers the ISR that 
- * will be triggered when a parity error occurs in IXP4xx silicon.</LI></OL>
- *
- * @li Re-entrant   : No
- * @li ISR Callable : No
- * 
- * @return @li IX_PARITYENACC_SUCCESS - Initialization is successful
- *         @li IX_PARITYENACC_ALREADY_INITIALISED - The access layer has already 
- *             been initialized
- *         @li IX_PARITYENACC_OPERATION_FAILED - The request failed because the 
- *             operation didn't succeed on the hardware. Refer to error trace/log
- *             for details.
- */
-
-PUBLIC IxParityENAccStatus ixParityENAccInit(void);
-
-/**
- * @ingroup IxParityENAcc
- *
- * @fn IxParityENAccStatus ixParityENAccCallbackRegister (
-           IxParityENAccCallback parityErrNfyCallBack)
- *
- * @brief This function will register a new callback with IxParityENAcc component. 
- * It can also reregister a new callback replacing the old callback.
- *
- * @param parityErrNfyCallBack [in] - This parameter will specify the call-back
- * function supplied by the client application.
- *
- * This interface registers the user application supplied call-back handler with
- * the parity error handling access component after the init.
- *
- * The callback function will be called from an ISR that will be triggered by the 
- * parity error in the IXP400 silicon.
- *
- * The following actions will be performed by this function:
- * <OL><LI>Check for the prior initialisation of the module before registering or
- * re-registering of the callback.
- * Check for parity error detection disabled before re-registration of the callback.
- * </LI></OL>
- *
- * @li   Re-entrant   : No
- * @li   ISR Callable : No
- *
- * @return @li IX_PARITYENACC_SUCCESS - The parameters check passed and the 
- *             registration is successful.
- *         @li IX_PARITYENACC_INVALID_PARAMETERS - Request failed due to NULL 
- *             parameter passed.
- *         @li IX_PARITYENACC_OPERATION_FAILED - The request failed because the 
- *             parity error detection not yet disabled.
- *         @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior to
- *             the initialisation of the access layer.
- */
-
-PUBLIC IxParityENAccStatus ixParityENAccCallbackRegister (
-           IxParityENAccCallback parityErrNfyCallBack);
-
-/**
- * @ingroup IxParityENAcc
- *
- * @fn IxParityENAccStatus ixParityENAccParityDetectionConfigure (
-           const IxParityENAccHWParityConfig *hwParityConfig)
- *
- * @brief This interface allows the client application to enable the parity 
- * error detection on the underlying hardware block.
- *
- * @param hwParityConfig [in] - Hardware blocks for which the parity error 
- * detection is to be enabled or disabled.
- *
- * The client application allocates and provides the reference to the buffer.
- *
- * It will also verify whether the specific hardware block is functional or not.
- *
- * NOTE: Failure in enabling or disabling of one or more components result in
- * trace message but still returns IX_PARITYENACC_SUCCESS. Refer to the function 
- * @ref ixParityENAccParityDetectionQuery on how to verify the failures while 
- * enabling/disabling paritys error detection.
- *
- * It shall be invoked after the Init and CallbackRegister functions but before
- * any other function of the IxParityENAcc layer.
- *
- * @li   Re-entrant   : No
- * @li   ISR Callable : No
- *
- * @return @li IX_PARITYENACC_SUCCESS - The parameters check passed and the 
- *             request to enable/disable is successful.
- *         @li IX_PARITYENACC_INVALID_PARAMETERS-The request failed due to  
- *             NULL parameter supplied.
- *         @li IX_PARITYENACC_OPERATION_FAILED - The request failed because the 
- *             operation didn't succeed on the hardware.
- *         @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior to
- *             the initialisation of the access layer.
- */
-
-PUBLIC IxParityENAccStatus ixParityENAccParityDetectionConfigure (
-           const IxParityENAccHWParityConfig *hwParityConfig);
-
-/**
- * @ingroup IxParityENAcc
- *
- * @fn IxParityENAccStatus ixParityENAccParityDetectionQuery (
-           IxParityENAccHWParityConfig * const hwParityConfig)
- *
- * @brief This interface allows the client application to determine the 
- * status of the parity error detection on the specified hardware blocks
- *
- * @param hwParityConfig [out] - Hardware blocks whose parity error detection 
- * has been enabled or disabled.
- *
- * The client application allocates and provides the reference to the buffer.
- *
- * This interface can be used immediately after the interface @ref
- * ixParityENAccParityDetectionConfigure to see on which of the hardware blocks
- * the parity error detection has either been enabled or disabled based on the
- * client application request.
- *
- * @li   Re-entrant   : No
- * @li   ISR Callable : No
- *
- * @return @li IX_PARITYENACC_SUCCESS - The parameters check passed and the 
- *             request to query on whether the hardware parity error detection
- *             is enabled or disabled is successful.
- *         @li IX_PARITYENACC_INVALID_PARAMETERS-The request failed due to  
- *             NULL parameter or invalid values supplied.
- *         @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior 
- *             to the initialisation of the access layer.
- */
-
-PUBLIC IxParityENAccStatus ixParityENAccParityDetectionQuery(
-           IxParityENAccHWParityConfig * const hwParityConfig);
-
-/**
- * @ingroup IxParityENAcc
- *
- * @fn IxParityENAccStatus ixParityENAccParityErrorContextGet( 
-           IxParityENAccParityErrorContextMessage * const pecMessage)
- *
- * @brief This interface allows the client application to determine the 
- * status of the parity error context on hardware block for which the
- * current parity error interrupt triggered.
- *
- * @param pecMessage [out] - The parity error context information of the
- * parity interrupt currently being process.
- *
- * The client application allocates and provides the reference to the buffer.
- *
- * Refer to the data structure @ref IxParityENAccParityErrorContextMessage
- * for details.
- *
- * The routine will will fetch the parity error context in the following
- * priority, if multiple parity errors observed.
- * 
- * <pre>
- * 0 - MCU (Multi-bit and single-bit in that order)
- * 1 - NPE-A
- * 2 - NPE-B
- * 3 - NPE-C
- * 4 - SWCP
- * 5 - QM
- * 6 - EXP
- *
- * NOTE: The information provided in the @ref IxParityENAccAHBErrorTransaction
- * may be of help for the client application to decide on the course of action 
- * to take. This info is taken from the Performance Monitoring Unit register
- * which records most recent error observed on the AHB bus. This information
- * might have been overwritten by some other error by the time it is retrieved.
- * </pre>
- *
- * @li   Re-entrant   : No
- * @li   ISR Callable : Yes
- *
- * @return @li IX_PARITYENACC_SUCCESS-The parameters check passed and the 
- *             request to get the parity error context information is successful.
- *         @li IX_PARITYENACC_INVALID_PARAMETERS-The request failed due to  
- *             NULL parameter is passed
- *         @li IX_PARITYENACC_OPERATION_FAILED - The request failed because 
- *             the operation didn't succeed on the hardware.
- *         @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior
- *             to the initialisation of the access layer.
- *         @li IX_PARITYENACC_NO_PARITY - No parity condition exits or has 
- *             already been cleared
- */
-
-PUBLIC IxParityENAccStatus ixParityENAccParityErrorContextGet( 
-           IxParityENAccParityErrorContextMessage * const pecMessage);
-
-/**
- * @ingroup IxParityENAcc
- *
- * @fn IxParityENAccStatus ixParityENAccParityErrorInterruptClear (
-          const IxParityENAccParityErrorContextMessage *pecMessage)
- *
- * @brief This interface helps the client application to clear off the
- * interrupt condition on the hardware block identified in the parity
- * error context message.  Please refer to the table below as the operation
- * varies depending on the interrupt source.
- * 
- * @param pecMessage [in] - The parity error context information of the
- * hardware block whose parity error interrupt condition is to disabled.
- *
- * The client application allocates and provides the reference to the buffer.
- *
- * <pre>
- * ****************************************************************************
- * Following actions will be taken during the interrupt clear for respective
- * hardware blocks.
- * 
- *  Parity Source     Actions taken during Interrupt clear 
- *  -------------     -------------------------------------------------------
- *  NPE-A             Interrupt will be masked off at the interrupt controller 
- *                    so that it will not trigger continuously.
- *                      Client application has to take appropriate action and 
- *                      re-configure the parity error detection subsequently. 
- *                      The client application will not be notified of further 
- *                      interrupts, until the re-configuration is done using
- *                      @ref ixParityENAccParityDetectionConfigure.
- *
- *  NPE-B             Interrupt will be masked off at the interrupt controller 
- *                    so that it will not trigger continuously.
- *                      Client application has to take appropriate action and 
- *                      re-configure the parity error detection subsequently. 
- *                      The client application will not be notified of further
- *                      interrupts, until the re-configuration is done using
- *                      @ref ixParityENAccParityDetectionConfigure.
- *
- *  NPE-C             Interrupt will be masked off at the interrupt controller 
- *                      Client application has to take appropriate action and 
- *                      re-configure the parity error detection subsequently. 
- *                      The client application will not be notified of further
- *                      interrupts, until the re-configuration is done using
- *                      @ref ixParityENAccParityDetectionConfigure.
- *
- *  SWCP              Interrupt will be masked off at the interrupt controller.
- *                      Client application has to take appropriate action and 
- *                      re-configure the parity error detection subsequently. 
- *                      The client application will not be notified of further
- *                      interrupts, until the re-configuration is done using
- *                      @ref ixParityENAccParityDetectionConfigure.
- *
- *  AQM               Interrupt will be masked off at the interrupt controller.
- *                         Client application has to take appropriate action and 
- *                         re-configure the parity error detection subsequently. 
- *                         The client application will not be notified of further
- *                         interrupts, until the re-configuration is done using
- *                         @ref ixParityENAccParityDetectionConfigure.
- *
- *  MCU               Parity interrupt condition is cleared at the SDRAM MCU for 
- *                    the following:
- *                    1. Single-bit
- *                    2. Multi-bit
- *                    3. Overflow condition i.e., more than two parity conditions 
- *                       occurred
- *                    Note that single-parity errors do not result in data abort
- *                    and not all data aborts caused by multi-bit parity error.
- *
- *  EXP               Parity interrupt condition is cleared at the expansion bus 
- *                    controller for the following:
- *                    1. External master initiated Inbound write
- *                    2. Internal master (IXP400) initiated Outbound read
- * ****************************************************************************
- * </pre>
- * @li   Re-entrant   : No
- * @li   ISR Callable : No
- *
- * @return @li IX_PARITYENACC_SUCCESS-The parameters check passed and the request
- *             to clear the parity error interrupt condition is successful.
- *         @li IX_PARITYENACC_INVALID_PARAMETERS-The request failed due to 
- *             NULL parameters have been passed or contents have been
- *             supplied with invalid values.
- *         @li IX_PARITYENACC_OPERATION_FAILED - The request failed because 
- *             the operation didn't succeed on the hardware.
- *         @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior
- *             to the initialisation of the access layer.
- */
-
-PUBLIC IxParityENAccStatus ixParityENAccParityErrorInterruptClear (
-          const IxParityENAccParityErrorContextMessage *pecMessage);
-
-/**
- * @ingroup IxParityENAcc
- *
- * @fn IxParityENAccStatus ixParityENAccStatsGet (
-            IxParityENAccParityErrorStats * const ixParityErrorStats)
- *
- * @brief This interface allows the client application to retrieve parity 
- * error statistics for all the hardware blocks 
- *
- * @param ixParityErrorStats - [out] The statistics for all the hardware blocks.
- *
- * The client application allocates and provides the reference to the buffer.
- *
- * @li   Re-entrant   : No
- * @li   ISR Callable : Yes
- *
- * @return @li IX_PARITYENACC_SUCCESS-The parameters check passed and the 
- *             request to retrieve parity error statistics for the hardware
- *             block is successful.
- *         @li IX_PARITYENACC_INVALID_PARAMETERS-The request failed due to a
- *             NULL parameter passed.
- *         @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior
- *             to the initialisation of the access layer.
- */
-
-PUBLIC IxParityENAccStatus ixParityENAccStatsGet (
-            IxParityENAccParityErrorStats * const ixParityErrorStats);
-
-/**
- * @ingroup IxParityENAcc
- *
- * @fn IxParityENAccStatus ixParityENAccStatsShow (void)
- *
- * @brief This interface allows the client application to print all the
- * parity error statistics.
- *
- * @li   Re-entrant   : No
- * @li   ISR Callable : No
- *
- * @return @li IX_PARITYENACC_SUCCESS - The request to show the pairty 
- *             error statistics is successful.
- *         @li IX_PARITYENACC_NOT_INITIALISED - The operation requested
- *             prior to the initialisation of the access layer.
- */
-
-PUBLIC IxParityENAccStatus ixParityENAccStatsShow (void);
-
-/**
- * @ingroup IxParityENAcc
- *
- * @fn IxParityENAccStatus ixParityENAccStatsReset (void)
- *
- * @brief This interface allows the client application to reset all the 
- * parity error statistics.
- *
- * @li   Re-entrant   : No
- * @li   ISR Callable : No
- *
- * @return @li IX_PARITYENACC_SUCCESS - The request to reset the parity 
- *             error statistics is successful.
- *         @li IX_PARITYENACC_NOT_INITIALISED - The operation requested 
- *             prior to the initialisation of the access layer.
- */
-
-PUBLIC IxParityENAccStatus ixParityENAccStatsReset (void);
-
-#endif /* IXPARITYENACC_H */
-#endif /* __ixp46X */
-
-/**
- * @} defgroup IxParityENAcc
- */
-
diff --git a/drivers/net/npe/include/IxPerfProfAcc.h b/drivers/net/npe/include/IxPerfProfAcc.h
deleted file mode 100644
index 2781ec8..0000000
--- a/drivers/net/npe/include/IxPerfProfAcc.h
+++ /dev/null
@@ -1,1334 +0,0 @@
-/**
- * @file IxPerfProfAcc.h
- *
- * @brief  Header file for the IXP400 Perf Prof component (IxPerfProfAcc)
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxPerfProfAcc IXP400 Performance Profiling (IxPerfProfAcc) API 
- *
- * @brief IXP400 Performance Profiling Utility component Public API. 
- * @li NOTE: Xcycle measurement is not supported in Linux.
- *
- *
- * @{
- */
-#ifndef IXPERFPROFACC_H
-#define IXPERFPROFACC_H
-
-#include "IxOsal.h"
-
-#ifdef __linux
-#include <linux/proc_fs.h>
-#endif
-
-/*
- * Section for #define
- */
-/**
- * @ingroup IxPerfProfAcc
- *
- * @def IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES
- *
- * @brief This is the maximum number of profiling samples allowed, which can be
- * modified according to the user's discretion
- */
-#define IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES	0xFFFF
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @def IX_PERFPROF_ACC_BUS_PMU_MAX_PECS      
- *
- * @brief This is the maximum number of Programmable Event Counters available. 
- *        This is a hardware specific and fixed value. Do not change.
- *        
- */
-#define IX_PERFPROF_ACC_BUS_PMU_MAX_PECS        7
-
-/**  
- * @ingroup IxPerfProfAcc
- *
- * @def IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS
- *
- * @brief Max number of measurement allowed. This constant is used when 
- *        creating storage array for Xcycle. When run in continuous mode,  
- *        Xcycle will wrap around and re-use buffer. 
- */
-#define IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS 600
-
-#ifdef __linux
-/**
- * @ingroup IxPerfProfAcc
- *
- * @def IX_PERFPROF_ACC_XSCALE_PMU_SYMBOL_ACCURACY
- *
- * @brief Level of accuracy required for matching the PC Address to
- *        symbol address. This is used when the XScale PMU time/event
- *        sampling functions get the PC address and search for the 
- *        corresponding symbol address.
- */
-#define IX_PERFPROF_ACC_XSCALE_PMU_SYMBOL_ACCURACY 0xffff
-
-#endif /*__linux*/
-
-/**  
- * @ingroup IxPerfProfAcc
- *
- * @def IX_PERFPROF_ACC_LOG
- *
- * @brief Mechanism for logging a formatted message for the PerfProfAcc component
- *
- * @param level UINT32 [in] - trace level
- * @param device UINT32 [in] - output device
- * @param str char* [in] - format string, similar to printf().
- * @param a UINT32 [in] - first argument to display
- * @param b UINT32 [in] - second argument to display
- * @param c UINT32 [in] - third argument to display
- * @param d UINT32 [in] - fourth argument to display
- * @param e UINT32 [in] - fifth argument to display
- * @param f UINT32 [in] - sixth argument to display
- *
- * @return none
- */
-#ifndef NDEBUG
-#define IX_PERFPROF_ACC_LOG(level, device, str, a, b, c, d, e, f)\
-             (ixOsalLog (level, device, str, a, b, c, d, e, f))
-#else /*do nothing*/
-#define IX_PERFPROF_ACC_LOG(level, device, str, a, b, c, d, e, f) 
-#endif /*ifdef NDEBUG */
-
-/*
- * Section for struct
- */
-
-/**
- * @brief contains summary of samples taken 
- * 
- * Structure contains all details of each program counter value - frequency 
- * that PC occurs 
- */
-typedef struct
-{
-	UINT32 programCounter;  /**<the program counter value of the sample*/
-	UINT32 freq;		/**<the frequency of the occurence of the sample*/
-} IxPerfProfAccXscalePmuSamplePcProfile;
-
-/**
- * @brief contains results of a counter
- *
- * Structure contains the results of a counter, which are split into the lower 
- * and upper 32 bits of the final count
- */
-typedef struct
-{
-    UINT32 lower32BitsEventCount; /**<lower 32bits value of the event counter*/        
-    UINT32 upper32BitsEventCount; /**<upper 32bits value of the event counter*/
-}   IxPerfProfAccXscalePmuEvtCnt;
-
-/**
- * @brief contains results of counters and their overflow 
- * 
- * Structure contains all values of counters and associated overflows.  The 
- * specific event and clock counters are determined by the user
- */
-typedef struct
-{
-    UINT32 clk_value;           /**<current value of clock counter*/                 
-    UINT32 clk_samples;        /**<number of clock counter overflows*/
-    UINT32 event1_value;        /**<current value of event 1 counter*/    
-    UINT32 event1_samples;     /**<number of event 1 counter overflows*/
-    UINT32 event2_value;        /**<current value of event 2 counter*/
-    UINT32 event2_samples;     /**<number of event 2 counter overflows*/
-    UINT32 event3_value;        /**<current value of event 3 counter*/
-    UINT32 event3_samples;     /**<number of event 3 counter overflows*/
-    UINT32 event4_value;        /**<current value of event 4 counter*/
-    UINT32 event4_samples;     /**<number of event 4 counter overflows*/
-} IxPerfProfAccXscalePmuResults;
-
-/** 
- * 
- * @brief Results obtained from Xcycle run 
- */ 
-typedef struct 
-{
-    float maxIdlePercentage; 		/**<maximum percentage of Idle cycles*/
-    float minIdlePercentage; 		/**<minimum percentage of Idle cycles*/
-    float aveIdlePercentage;		/**<average percentage of Idle cycles*/
-    UINT32 totalMeasurements;		/**<total number of measurement made */
-} IxPerfProfAccXcycleResults; 
-
-/**
- *
- * @brief Results obtained from running the Bus Pmu component. The results
- *        are obtained when the get functions is called.
- *        
- */
-typedef struct
-{
-    UINT32 statsToGetLower27Bit[IX_PERFPROF_ACC_BUS_PMU_MAX_PECS]; /**<Lower 27 Bit of counter value */
-    UINT32 statsToGetUpper32Bit[IX_PERFPROF_ACC_BUS_PMU_MAX_PECS]; /**<Upper 32 Bit of counter value */
-} IxPerfProfAccBusPmuResults;
-
-/*
- * Section for enum
- */
-
-/**
- * @ingroup IxPerfProfAcc
- * 
- * @enum IxPerfProfAccBusPmuEventCounters1
- *
- * @brief Type of bus pmu events supported on PEC 1.
- *
- * Lists all bus pmu events.  
- */
-typedef enum
-{
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEA_GRANT_SELECT = 1, /**< Select North NPEA grant on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEB_GRANT_SELECT, /**< Select North NPEB grant on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEC_GRANT_SELECT, /**< Select North NPEC grant on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_BUS_IDLE_SELECT, /**< Select North bus idle on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEA_REQ_SELECT, /**< Select North NPEA req on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEB_REQ_SELECT, /**< Select North NPEB req on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEC_REQ_SELECT, /**< Select North NPEC req on PEC1*/
-
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_GSKT_GRANT_SELECT, /**< Select south gasket grant on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_ABB_GRANT_SELECT, /**< Select south abb grant on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_PCI_GRANT_SELECT, /**< Select south pci grant on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_APB_GRANT_SELECT, /**< Select south apb grant on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_GSKT_REQ_SELECT, /**< Select south gasket request on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_ABB_REQ_SELECT, /**< Select south abb request on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_PCI_REQ_SELECT, /**< Select south pci request on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_APB_REQ_SELECT, /**< Select south apb request on PEC1*/
-
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_0_HIT_SELECT, /**< Select sdram0 hit on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_1_HIT_SELECT, /**< Select sdram1 hit on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_4_MISS_SELECT, /**< Select sdram4 miss on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_5_MISS_SELECT, /**< Select sdram5 miss on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC1*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_7_MISS_SELECT /**< Select sdram7 miss on PEC1*/
-} IxPerfProfAccBusPmuEventCounters1;
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @enum IxPerfProfAccBusPmuEventCounters2
- *
- * @brief Type of bus pmu events supported on PEC 2.
- *
- * Lists all bus pmu events.
- */
-typedef enum
-{
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEA_XFER_SELECT = 24, /**< Select North NPEA transfer on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEB_XFER_SELECT, /**< Select North NPEB transfer on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEC_XFER_SELECT, /**< Select North NPEC transfer on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_BUS_WRITE_SELECT, /**< Select North bus write on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEA_OWN_SELECT, /**< Select North NPEA own on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEB_OWN_SELECT, /**< Select North NPEB own on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEC_OWN_SELECT, /**< Select North NPEC own on PEC2*/
-
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_GSKT_XFER_SELECT, /**< Select South gasket transfer on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_ABB_XFER_SELECT, /**< Select South abb transfer on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_PCI_XFER_SELECT, /**< Select South pci transfer on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_APB_XFER_SELECT, /**< Select South apb transfer on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_GSKT_OWN_SELECT, /**< Select South gasket own on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_ABB_OWN_SELECT, /**< Select South abb own on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_PCI_OWN_SELECT, /**< Select South pci own on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_APB_OWN_SELECT, /**< Select South apb own transfer on PEC2*/
-
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_1_HIT_SELECT, /**< Select sdram1 hit on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_5_MISS_SELECT, /**< Select sdram5 miss on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC2*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_0_MISS_SELECT /**< Select sdram0 miss on PEC2*/
-} IxPerfProfAccBusPmuEventCounters2;
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @enum IxPerfProfAccBusPmuEventCounters3
- *
- * @brief Type of bus pmu events supported on PEC 3.
- *
- * Lists all bus pmu events.
- */
-typedef enum
-{
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEA_RETRY_SELECT = 47, /**< Select north NPEA retry on PEC3*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEB_RETRY_SELECT, /**< Select north NPEB retry on PEC3*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEC_RETRY_SELECT, /**< Select north NPEC retry on PEC3*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_BUS_READ_SELECT, /**< Select north bus read on PEC3*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEA_WRITE_SELECT, /**< Select north NPEA write on PEC3*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC3*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEC_WRITE_SELECT, /**< Select north NPEC wirte on PEC3*/
-
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_GSKT_RETRY_SELECT, /**< Select south gasket retry on PEC3*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_ABB_RETRY_SELECT, /**< Select south abb retry on PEC3*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_PCI_RETRY_SELECT, /**< Select south pci retry on PEC3*/
-	IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_APB_RETRY_SELECT, /**< Select south apb retry on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_GSKT_WRITE_SELECT, /**< Select south gasket write on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_ABB_WRITE_SELECT, /**< Select south abb write on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_PCI_WRITE_SELECT, /**< Select south pci write on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_APB_WRITE_SELECT, /**< Select south apb write on PEC3*/
-
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_0_MISS_SELECT, /**< Select sdram0 miss on PEC3*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_1_MISS_SELECT /**< Select sdram1 miss on PEC3*/
-} IxPerfProfAccBusPmuEventCounters3;
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @enum IxPerfProfAccBusPmuEventCounters4
- *
- * @brief Type of bus pmu events supported on PEC 4.
- *
- * Lists all bus pmu events.
- */
-typedef enum
-{
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_PCI_SPLIT_SELECT = 70, /**< Select south pci split on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_EXP_SPLIT_SELECT, /**< Select south expansion split on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_GRANT_SELECT, /**< Select south apb grant on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_XFER_SELECT, /**< Select south apb transfer on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_GSKT_READ_SELECT, /**< Select south gasket read on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_ABB_READ_SELECT, /**< Select south abb read on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_PCI_READ_SELECT, /**< Select south pci read on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_READ_SELECT, /**< Select south apb read on PEC4*/
-
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_ABB_SPLIT_SELECT, /**< Select north abb split on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEA_REQ_SELECT, /**< Select north NPEA req on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEA_READ_SELECT, /**< Select north NPEA read on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEB_READ_SELECT, /**< Select north NPEB read on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEC_READ_SELECT, /**< Select north NPEC read on PEC4*/
-
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_6_HIT_SELECT, /**< Select sdram6 hit on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_0_MISS_SELECT, /**< Select sdram0 miss on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_1_MISS_SELECT, /**< Select sdram1 miss on PEC4*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_2_MISS_SELECT /**< Select sdram2 miss on PEC4*/
-} IxPerfProfAccBusPmuEventCounters4;
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @enum IxPerfProfAccBusPmuEventCounters5
- *
- * @brief Type of bus pmu events supported on PEC 5.
- *
- * Lists all bus pmu events.
- */
-typedef enum
-{
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_GRANT_SELECT = 91, /**< Select south abb grant on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_XFER_SELECT, /**< Select south abb transfer on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_RETRY_SELECT, /**< Select south abb retry on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_EXP_SPLIT_SELECT, /**< Select south expansion split on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_REQ_SELECT, /**< Select south abb request on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_OWN_SELECT, /**< Select south abb own on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_BUS_IDLE_SELECT, /**< Select south bus idle on PEC5*/
-
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_GRANT_SELECT, /**< Select north NPEB grant on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_XFER_SELECT, /**< Select north NPEB transfer on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_RETRY_SELECT, /**< Select north NPEB retry on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_REQ_SELECT, /**< Select north NPEB request on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_OWN_SELECT, /**< Select north NPEB own on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_READ_SELECT, /**< Select north NPEB read on PEC5*/
-
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_4_HIT_SELECT, /**< Select north sdram4 hit on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_5_HIT_SELECT, /**< Select north sdram5 hit on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_6_HIT_SELECT, /**< Select north sdram6 hit on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_7_HIT_SELECT, /**< Select north sdram7 hit on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_0_MISS_SELECT, /**< Select north sdram0 miss on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_1_MISS_SELECT, /**< Select north sdram1 miss on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_2_MISS_SELECT, /**< Select north sdram2 miss on PEC5*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_3_MISS_SELECT /**< Select north sdram3 miss on PEC5*/
-} IxPerfProfAccBusPmuEventCounters5;
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @enum IxPerfProfAccBusPmuEventCounters6
- *
- * @brief Type of bus pmu events supported on PEC 6.
- *
- * Lists all bus pmu events.
- */
-typedef enum
-{
-	IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_GRANT_SELECT = 113, /**< Select south pci grant on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_XFER_SELECT, /**< Select south pci transfer on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_RETRY_SELECT, /**< Select south pci retry on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_SPLIT_SELECT, /**< Select south pci split on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_REQ_SELECT, /**< Select south pci request on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_OWN_SELECT, /**< Select south pci own on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_BUS_WRITE_SELECT, /**< Select south pci write on PEC6*/
-
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_GRANT_SELECT, /**< Select north NPEC grant on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_XFER_SELECT, /**< Select north NPEC transfer on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_RETRY_SELECT, /**< Select north NPEC retry on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_REQ_SELECT, /**< Select north NPEC request on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_OWN_SELECT, /**< Select north NPEC own on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_READ_SELECT, /**< Select north NPEC read on PEC6*/
-
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_6_HIT_SELECT, /**< Select sdram6 hit on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_7_HIT_SELECT, /**< Select sdram7 hit on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_0_HIT_SELECT, /**< Select sdram0 hit on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_1_MISS_SELECT, /**< Select sdram1 miss on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_2_MISS_SELECT, /**< Select sdram2 miss on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_3_MISS_SELECT, /**< Select sdram3 miss on PEC6*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_4_MISS_SELECT /**< Select sdram4 miss on PEC6*/
-} IxPerfProfAccBusPmuEventCounters6;
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @enum IxPerfProfAccBusPmuEventCounters7
- *
- * @brief Type of bus pmu events supported on PEC 7.
- *
- * Lists all bus pmu events.
- */
-typedef enum
-{
- 	IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_RETRY_SELECT = 135, /**< Select south apb retry on PEC7*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_REQ_SELECT, /**< Select south apb request on PEC7*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_OWN_SELECT, /**< Select south apb own on PEC7*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_BUS_READ_SELECT, /**< Select south bus read on PEC7*/
- 	IX_PERFPROF_ACC_BUS_PMU_PEC7_CYCLE_COUNT_SELECT /**< Select cycle count on PEC7*/
-} IxPerfProfAccBusPmuEventCounters7;
-
-/** 
- * @ingroup IxPerfProfAcc 
- * 
- * @enum IxPerfProfAccXscalePmuEvent 
- * 
- * @brief Type of xscale pmu events supported 
- * 
- * Lists all xscale pmu events.  The maximum is a default value that the user 
- * should not exceed. 
- */ 
-typedef enum 
-{
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_CACHE_MISS=0,      /**< cache miss*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_CACHE_INSTRUCTION,/**< cache instruction*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_STALL,     /**< event stall*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_INST_TLB_MISS, /**< instruction tlb miss*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_TLB_MISS, /**< data tlb miss*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_BRANCH_EXEC,   /**< branch executed*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_BRANCH_MISPREDICT, /**<branch mispredict*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_INST_EXEC, /**< instruction executed*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_FULL_EVERYCYCLE,   /**< 
-                                                         *Stall - data cache 
-                                                         *buffers are full. 
-							 							 *This event occurs 
-							 							 *every cycle where 
-							 							 *condition present 
-							 							 */ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_ONCE,    /**< 
-                                               *Stall - data cache buffers are 
-					       					   *full.This event occurs once 
-					       					   *for each contiguous sequence 
-					       					   */ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_ACCESS, /**< data cache access*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_MISS,   /**< data cache miss*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_WRITEBACK,  /**<data cache 
-                                                             *writeback 
-						             						 */ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_SW_CHANGE_PC,  /**< sw change pc*/ 
-    IX_PERFPROF_ACC_XSCALE_PMU_EVENT_MAX    /**< max value*/ 
-} IxPerfProfAccXscalePmuEvent;
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @enum IxPerfProfAccStatus
- *
- * @brief Invalid Status Definitions  
- *
- * These status will be used by the APIs to return to the user.
- */
-typedef enum
-{
-	IX_PERFPROF_ACC_STATUS_SUCCESS = IX_SUCCESS,    /**< success*/
-	IX_PERFPROF_ACC_STATUS_FAIL = IX_FAIL,          /**< fail*/
-	IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS,/**<another utility in 
-													 *progress
-													 */ 
-	IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS, /**<measurement in
-															*progress
-															*/
-	IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE, /**<no baseline yet*/	 
-	IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_REQUEST_OUT_OF_RANGE, /**< 
-															* Measurement chosen 
-															* is out of range
-															*/
-	IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL,  /**<
-	                                                     * Cannot set 
-														 * task priority
-	                                                     */
-	IX_PERFPROF_ACC_STATUS_XCYCLE_THREAD_CREATE_FAIL, /**< 
-	                                                     * Fail create thread
-	                                                     */
-	IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_RESTORE_FAIL,  /**<
-	                                                         *cannot restore
-	                                                         *priority
-	                                                         */
-	IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING, /**< xcycle not running*/
-   	IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID, /**< invalid number 
-   	                                                *entered
-   	                                                */
-	IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID, /**< invalid pmu event*/
-	IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED, /**<a start process
-							     						 *was not called 
-							     						 *before attempting
-							     						 *a stop or results
-							     						 *get
-							     						 */
-	IX_PERFPROF_ACC_STATUS_BUS_PMU_MODE_ERROR,  /**< invalid mode*/
-	IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC1_ERROR,	/**< invalid pec1 entered*/
-	IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC2_ERROR,	/**< invalid pec2 entered*/
-	IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC3_ERROR,	/**< invalid pec3 entered*/
-	IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC4_ERROR,	/**< invalid pec4 entered*/
-	IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC5_ERROR,	/**< invalid pec5 entered*/
-	IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC6_ERROR,	/**< invalid pec6 entered*/
-	IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC7_ERROR,	/**< invalid pec7 entered*/
-	IX_PERFPROF_ACC_STATUS_BUS_PMU_START_NOT_CALLED, /**<a start process
-							     					 *was not called 
-							     					 *before attempting
-							     					 *a stop 
-													 */
-        IX_PERFPROF_ACC_STATUS_COMPONENT_NOT_SUPPORTED /**<Device or OS does not support component*/
-} IxPerfProfAccStatus;
-
-/**
- * @ingroup IxPerfProfAcc 
- * 
- * @enum IxPerfProfAccBusPmuMode
- *
- * @brief State selection of counters.
- *
- * These states will be used to determine the counters whose values are to be
- * read.
- */
-typedef enum
-{
-        IX_PERFPROF_ACC_BUS_PMU_MODE_HALT=0,   /**< halt state*/
-        IX_PERFPROF_ACC_BUS_PMU_MODE_SOUTH,    /**< south state*/
-        IX_PERFPROF_ACC_BUS_PMU_MODE_NORTH,    /**< north state*/
-        IX_PERFPROF_ACC_BUS_PMU_MODE_SDRAM    /**< SDRAM state*/
-} IxPerfProfAccBusPmuMode;
-
-/*
- * Section for prototypes interface functions
- */
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @fn ixPerfProfAccXscalePmuEventCountStart(
-   		BOOL clkCntDiv,
-   		UINT32 numEvents,
-  	 	IxPerfProfAccXscalePmuEvent pmuEvent1,
-   		IxPerfProfAccXscalePmuEvent pmuEvent2,
-   		IxPerfProfAccXscalePmuEvent pmuEvent3,
-   		IxPerfProfAccXscalePmuEvent pmuEvent4 )
- *
- * @brief This API will start the clock and event counting
- *
- * @param	clkCntDiv BOOL [in] - enables/disables the clock divider. When 
- *			true, the divider is enabled and the clock count will be incremented
- *          by one at each 64th processor clock cycle.  When false, the divider
- *			is disabled and the clock count will be incremented at every 
- *			processor clock cycle.
- * @param 	numEvents UINT32 [in] - the number of PMU events that are to be 
- *	  		monitored as specified by the user. For clock counting only, this
- *	  	 	is set to zero.
- * @param 	pmuEvent1 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU 
- *    		event to be monitored by counter 1
- * @param 	pmuEvent2 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU 
- *    		event to be monitored by counter 2 
- * @param	pmuEvent3 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU 
- *    		event to be monitored by counter 3
- * @param 	pmuEvent4 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU 
- *    		event to be monitored by counter 4
- *
- * This API will start the clock and xscale PMU event counting.  Up to 
- * 4 events can be monitored simultaneously. This API has to be called before
- * ixPerfProfAccXscalePmuEventCountStop can be called.
- *
- * @return 
- *	- IX_PERFPROF_ACC_STATUS_SUCCESS if clock and events counting are 
- *        started successfully
- *	- IX_PERFPROF_ACC_STATUS_FAIL if unable to start the counting
- *	- IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID if the number of events 
- *        specified is out of the valid range
- *	- IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID if the value of the PMU 
- * 	  event specified does not exist
- * 	- IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is 
- * 	  running 
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IxPerfProfAccStatus
-ixPerfProfAccXscalePmuEventCountStart(
-	BOOL clkCntDiv,
-	UINT32 numEvents,
-	IxPerfProfAccXscalePmuEvent pmuEvent1,
-	IxPerfProfAccXscalePmuEvent pmuEvent2,
-	IxPerfProfAccXscalePmuEvent pmuEvent3,
-	IxPerfProfAccXscalePmuEvent pmuEvent4 );
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @fn ixPerfProfAccXscalePmuEventCountStop (
-   IxPerfProfAccXscalePmuResults *eventCountStopResults) 
- *
- * @brief This API will stop the clock and event counting
- *
- * @param *eventCountStopResults @ref IxPerfProfAccXscalePmuResults [out] - pointer 
- *		  to struct containing results of counters and their overflow. It is the 
- * 		  users's responsibility to allocate the memory for this pointer. 
- *
- * This API will stop the clock and xscale PMU events that are being counted.
- * The results of the clock and events count will be stored in the pointer 
- * allocated by the user. It can only be called once 
- * IxPerfProfAccEventCountStart has been called. 
- *
- * @return 
- *      - IX_PERFPROF_ACC_STATUS_SUCCESS if clock and events counting are 
- *        stopped successfully
- *      - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if
- *        ixPerfProfAccXscalePmuEventCountStart is not called first.
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-
-PUBLIC IxPerfProfAccStatus 
-ixPerfProfAccXscalePmuEventCountStop(
-   IxPerfProfAccXscalePmuResults *eventCountStopResults); 
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @fn ixPerfProfAccXscalePmuTimeSampStart(
-   UINT32 samplingRate,
-   BOOL clkCntDiv) 
- *
- * @brief Starts the time based sampling
- *
- * @param	samplingRate UINT32 [in] - sampling rate is the number of
- *       	clock counts before a counter overflow interrupt is generated,
- *        	at which, a sample is taken; the rate specified cannot be greater
- *          than the counter size of 32bits or set to zero.
- * @param 	clkCntDiv BOOL [in] - enables/disables the clock divider. When 
- *		true, the divider is enabled and the clock count will be incremented
- *          by one at each 64th processor clock cycle.  When false, the divider
- *			is disabled and the clock count will be incremented at every 
- *			processor clock cycle. 
- *
- * This API starts the time based sampling to determine the frequency with 
- * which lines of code are being executed.  Sampling is done at the rate 
- * specified by the user.  At each sample,the value of the program counter
- * is determined.  Each of these occurrences are recorded to determine the 
- * frequency with which the Xscale code is being executed. This API has to be 
- * called before ixPerfProfAccXscalePmuTimeSampStop can be called.
- *
- * @return
- *	- IX_PERFPROF_ACC_STATUS_SUCCESS if time based sampling is started 
- *        successfully
- *	- IX_PERFPROF_ACC_STATUS_FAIL if unable to start the sampling
- * 	- IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is 
- *	  running 
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IxPerfProfAccStatus 
-ixPerfProfAccXscalePmuTimeSampStart(
-	UINT32 samplingRate, 
-	BOOL clkCntDiv);
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @fn ixPerfProfAccXscalePmuTimeSampStop(
-   IxPerfProfAccXscalePmuEvtCnt *clkCount,
-   IxPerfProfAccXscalePmuSamplePcProfile *timeProfile)
- *
- * @brief Stops the time based sampling
- *
- * @param	*clkCount @ref IxPerfProfAccXscalePmuEvtCnt [out]  - pointer to the 
- *			struct containing the final clock count and its overflow.  It is the
- *			user's responsibility to allocate the memory for this pointer.
- * @param 	*timeProfile @ref IxPerfProfAccXscalePmuSamplePcProfile [out] -
- *          pointer to the array of profiles for each program counter value;
- *          the user should set the size of the array to 
- *			IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES.  It is the user's 
- * 			responsibility to allocate the memory for this pointer.
- *
- * This API stops the time based sampling.  The results are stored in the 
- * pointers allocated by the user.  It can only be called once
- * ixPerfProfAccXscalePmuTimeSampStart has been called.
- *
- * @return
- *	- IX_PERFPROF_ACC_STATUS_SUCCESS if time based sampling is stopped 
- *        successfully
- *	- IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if
- *	  ixPerfProfAccXscalePmuTimeSampStart not called first
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IxPerfProfAccStatus
-ixPerfProfAccXscalePmuTimeSampStop(
-	IxPerfProfAccXscalePmuEvtCnt *clkCount,
-	IxPerfProfAccXscalePmuSamplePcProfile *timeProfile);
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @fn ixPerfProfAccXscalePmuEventSampStart(
-   UINT32 numEvents,
-   IxPerfProfAccXscalePmuEvent pmuEvent1,
-   UINT32 eventRate1,
-   IxPerfProfAccXscalePmuEvent pmuEvent2,
-   UINT32 eventRate2,
-   IxPerfProfAccXscalePmuEvent pmuEvent3,
-   UINT32 eventRate3,
-   IxPerfProfAccXscalePmuEvent pmuEvent4,
-   UINT32 eventRate4)
- *
- * @brief Starts the event based sampling
- *
- * @param	numEvents UINT32 [in] - the number of PMU events that are 
- *	  		to be monitored as specified by the user. The value should be
- *          between 1-4 events at a time.
- * @param 	pmuEvent1 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU 
- *    		event to be monitored by counter 1
- * @param 	eventRate1 UINT32 [in] - sampling rate of counter 1. The rate is 
- *			the number of events before a sample taken.  If 0 is specified, the
- *			the full counter value (0xFFFFFFFF) is used. The rate must not be 
- *			greater than the full counter value.
- * @param 	pmuEvent2 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU 
- *    		event to be monitored by counter 2 
- * @param 	eventRate2 UINT32 [in] -  sampling rate of counter 2. The rate is 
- *			the number of events before a sample taken. If 0 is specified, the 
- *			full counter value (0xFFFFFFFF) is used. The rate must not be 
- *          greater than the full counter value.
- * @param 	pmuEvent3 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU 
- *    		event to be monitored by counter 3
- * @param 	eventRate3 UINT32 [in] -  sampling rate of counter 3. The rate is 
- *			the number of events before a sample taken.  If 0 is specified, the 
- *			full counter value (0xFFFFFFFF) is used.  The rate must not be 
- *          greater than the full counter value.
- * @param 	pmuEvent4 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU 
- *    		event to be monitored by counter 4
- * @param 	eventRate4 UINT32 [in] -  sampling rate of counter 4. The rate is 
- *			the number of events before a sample taken.  If 0 is specified, the 
- *			full counter value (0xFFFFFFFF) is used. The rate must not be 
- *          greater than the full counter value.
- *
- * Starts the event based sampling to determine the frequency with 
- * which events are being executed.  The sampling rate is the number of events,
- * as specified by the user,  before a counter overflow interrupt is 
- * generated.  A sample is taken at each counter overflow interrupt.  At each
- * sample,the value of the program counter determines the corresponding 
- * location in the code.  Each of these occurrences are recorded to determine 
- * the frequency with which the Xscale code in each event is executed. This API
- * has to be called before ixPerfProfAccXscalePmuEventSampStop can be called.
- *
- * @return
- *	- IX_PERFPROF_ACC_STATUS_SUCCESS if event based sampling is started 
- *	  successfully
- *	- IX_PERFPROF_ACC_STATUS_FAIL if unable to start the sampling
- *	- IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID if the number of events 
- *        specified is out of the valid range
- *	- IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID if the value of the
- *        PMU event specified does not exist
- *      - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is
- *        running 
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IxPerfProfAccStatus
-ixPerfProfAccXscalePmuEventSampStart(
-	UINT32 numEvents,
-	IxPerfProfAccXscalePmuEvent pmuEvent1,
-	UINT32 eventRate1,
-    IxPerfProfAccXscalePmuEvent pmuEvent2,
-    UINT32 eventRate2,
-    IxPerfProfAccXscalePmuEvent pmuEvent3,
-    UINT32 eventRate3,
-    IxPerfProfAccXscalePmuEvent pmuEvent4,
-    UINT32 eventRate4);
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @fn ixPerfProfAccXscalePmuEventSampStop(
-   IxPerfProfAccXscalePmuSamplePcProfile *eventProfile1,
-   IxPerfProfAccXscalePmuSamplePcProfile *eventProfile2,
-   IxPerfProfAccXscalePmuSamplePcProfile *eventProfile3,
-   IxPerfProfAccXscalePmuSamplePcProfile *eventProfile4)
- *
- * @brief Stops the event based sampling
- *
- * @param       *eventProfile1 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - 
- *              pointer to the array of profiles for each program counter value;
- *              the user should set the size of the array to 
- *				IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the 
- *				users's responsibility to allocate memory for this pointer.
- * @param       *eventProfile2 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - 
- *              pointer to the array of profiles for each program counter value;
- *              the user should set the size of the array to 
- *				IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES.  It is the 
- *				users's responsibility to allocate memory for this pointer.
- * @param       *eventProfile3 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - 
- *              pointer to the array of profiles for each program counter value;
- *              the user should set the size of the array to 
- *				IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES.  It is the 
- *				users's responsibility to allocate memory for this pointer.
- * @param       *eventProfile4 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - 
- *              pointer to the array of profiles for each program counter value;
- *              the user should set the size of the array to 
- *				IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES.  It is the 
- *				users's responsibility to allocate memory for this pointer.
- *
- * This API stops the event based sampling.  The results are stored in the 
- * pointers allocated by the user.  It can only be called once 
- * ixPerfProfAccEventSampStart has been called.
- *
- * @return 
- *      - IX_PERFPROF_ACC_STATUS_SUCCESS if event based sampling is stopped 
- *         successfully
- *      - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if
- *          ixPerfProfAccEventSampStart not called first.
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IxPerfProfAccStatus 
-ixPerfProfAccXscalePmuEventSampStop(
-    IxPerfProfAccXscalePmuSamplePcProfile *eventProfile1,
-    IxPerfProfAccXscalePmuSamplePcProfile *eventProfile2,
-    IxPerfProfAccXscalePmuSamplePcProfile *eventProfile3,
-    IxPerfProfAccXscalePmuSamplePcProfile *eventProfile4);
-
-/**                                                                             
- * @ingroup IxPerfProfAcc                                                      
- *                                                                              
- * @fn ixPerfProfAccXscalePmuResultsGet(IxPerfProfAccXscalePmuResults *results)     
- *                                                                              
- * @brief Reads the current value of the counters and their overflow                                        
- *                                                                              
- * @param *results @ref IxPerfProfAccXscalePmuResults [out] - pointer to the 
-          results struct.  It is the user's responsibility to allocate memory
-          for this pointer
- *                                                                              
- * This API reads the value of all four event counters and the clock counter, 
- * and the associated overflows.  It does not give results associated with 
- * sampling, i.e. PC and their frequencies.  This API can be called at any time
- * once a process has been started. If it is called before a process has started
- * the user should be aware that the values it contains are default values and 
- * might be meaningless.  The values of the counters are stored in the pointer 
- * allocated by the client.
- *                                                                    
- * @return - none
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */                                                                             
-PUBLIC void                                                     
-ixPerfProfAccXscalePmuResultsGet(IxPerfProfAccXscalePmuResults *results);    
-
-/**
- * @ingroup IxPerfProfAcc
- * 
- * @fn ixPerfProfAccBusPmuStart(
-        IxPerfProfAccBusPmuMode mode, 
-        IxPerfProfAccBusPmuEventCounters1 pecEvent1,
-        IxPerfProfAccBusPmuEventCounters2 pecEvent2, 
-        IxPerfProfAccBusPmuEventCounters3 pecEvent3, 
-        IxPerfProfAccBusPmuEventCounters4 pecEvent4,
-        IxPerfProfAccBusPmuEventCounters5 pecEvent5, 
-        IxPerfProfAccBusPmuEventCounters6 pecEvent6, 
-        IxPerfProfAccBusPmuEventCounters7 pecEvent7)
- * @brief Initializes all the counters and selects events to be monitored.
- *
- * Function initializes all the counters and assigns the events associated 
- * with the counters. Users send in the mode and events they want to count.
- * This API verifies if the combination chosen is appropriate 
- * and sets all the registers accordingly. Selecting HALT mode will result
- * in an error. User should use ixPerfProfAccBusPmuStop() to HALT. 
- * 
- * 
- * @param mode @ref IxPerfProfAccStateBusPmuMode [in] - Mode selection.
- * @param pecEvent1 @ref IxPerfProfAccBusPmuEventCounters1 [in] - Event for PEC1.
- * @param pecEvent2 @ref IxPerfProfAccBusPmuEventCounters2 [in] - Event for PEC2.
- * @param pecEvent3 @ref IxPerfProfAccBusPmuEventCounters3 [in] - Event for PEC3.
- * @param pecEvent4 @ref IxPerfProfAccBusPmuEventCounters4 [in] - Event for PEC4.
- * @param pecEvent5 @ref IxPerfProfAccBusPmuEventCounters5 [in] - Event for PEC5.
- * @param pecEvent6 @ref IxPerfProfAccBusPmuEventCounters6 [in] - Event for PEC6.
- * @param pecEvent7 @ref IxPerfProfAccBusPmuEventCounters7 [in] - Event for PEC7.
- *
- * @return 
- *      - IX_PERFPROF_ACC_STATUS_SUCCESS - Initialization executed 
- *        successfully.  
- *      - IX_PERFPROF_ACC_STATUS_BUS_PMU_MODE_ERROR - Error in selection of 
- * 		  mode. Only NORTH, SOUTH and SDRAM modes are allowed. 
- *      - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC1_ERROR - Error in selection of 
- *        event for PEC1
- *      - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC2_ERROR - Error in selection of 
- *        event for PEC2 
- *      - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC3_ERROR - Error in selection of 
- *        event for PEC3
- *      - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC4_ERROR - Error in selection of 
- *        event for PEC4
- *      - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC5_ERROR - Error in selection of 
- *        event for PEC5
- *      - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC6_ERROR - Error in selection of 
- *        event for PEC6
- *      - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC7_ERROR - Error in selection of 
- *        event for PEC7
- * 		- IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility 
- * 		  is running
- * 		- IX_PERFPROF_ACC_STATUS_FAIL - Failed to start because interrupt 
- * 		  service routine fails to bind.  
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- **/
-PUBLIC 
-IxPerfProfAccStatus ixPerfProfAccBusPmuStart (
-        IxPerfProfAccBusPmuMode mode, 
-        IxPerfProfAccBusPmuEventCounters1 pecEvent1,
-        IxPerfProfAccBusPmuEventCounters2 pecEvent2, 
-        IxPerfProfAccBusPmuEventCounters3 pecEvent3, 
-        IxPerfProfAccBusPmuEventCounters4 pecEvent4,
-        IxPerfProfAccBusPmuEventCounters5 pecEvent5, 
-        IxPerfProfAccBusPmuEventCounters6 pecEvent6, 
-        IxPerfProfAccBusPmuEventCounters7 pecEvent7);
-
-/**
- * @ingroup IxPerfProfAcc
- * 
- * @fn ixPerfProfAccBusPmuStop(void)
- * @brief Stops all counters. 
- * 
- * This function stops all the PECs by setting the halt bit in the ESR.
- *
- *
- * @return 
- *      - IX_PERFPROF_ACC_STATUS_SUCCESS - Counters successfully halted.
- *      - IX_PERFPROF_ACC_STATUS_FAIL - Counters could'nt be halted. 
- *		- IX_PERFPROF_ACC_STATUS_BUS_PMU_START_NOT_CALLED - the 
- * 		  ixPerfProfAccBusPmuStart() function is not called.
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- **/
-PUBLIC IxPerfProfAccStatus 
-ixPerfProfAccBusPmuStop (void);
-
-/**
- * @ingroup IxPerfProfAcc
- * 
- * @fn ixPerfProfAccBusPmuResultsGet (
-		IxPerfProfAccBusPmuResults *busPmuResults)
- * @brief Gets values of all counters 
- * 
- * This function is responsible for getting all the counter values from the 
- * lower API and putting it into an array for the user.
- *
- * @param *busPmuResults @ref IxPerfProfAccBusPmuResults [out]
- *           - Pointer to a structure of arrays to store all counter values.
- *
- * @return  none
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- **/
-PUBLIC void
-ixPerfProfAccBusPmuResultsGet (IxPerfProfAccBusPmuResults *BusPmuResults);
-
-/**
- * @ingroup IxPerfProfAcc
- * 
- * @fn ixPerfProfAccBusPmuPMSRGet (
-	UINT32 *pmsrValue)
- * @brief Get values of PMSR  
- *
- * This API gets the Previous Master Slave Register
- * value and returns it to the calling function. This value indicates
- * which master or slave accessed the north, south bus or sdram last.
- * The value returned by this function is a 32 bit value and is read
- * from location of an offset 0x0024 of the base value.
- *
- * The PMSR value returned indicate the following:
- * <pre>
- *
- * *************************************************************************************
- * *  Bit    *  Name  *       Description                                              *
- * *                                                                                   * 
- * *************************************************************************************
- * * [31:18]  *Reserved*                                                               *
- * *************************************************************************************
- * * [17:12] *  PSS   * Indicates which of the slaves on                               *
- * *         *        *  ARBS was previously                                           *
- * *         *        * accessed by the AHBS.                                          * 
- * *         *        * [000001] Expansion Bus                                         *
- * *         *        * [000010] SDRAM Controller                                      *
- * *         *        * [000100] PCI                                                   *
- * *         *        * [001000] Queue Manager                                         * 
- * *         *        * [010000] AHB-APB Bridge                                        * 
- * *         *        * [100000] Reserved                                              *
- * *************************************************************************************
- * * [11:8]  *  PSN   * Indicates which of the Slaves on                               *
- * *         *        * ARBN was previously                                            *
- * *         *        * accessed the AHBN.                                             *
- * *         *        * [0001] SDRAM Controller                                        *
- * *         *        * [0010] AHB-AHB Bridge                                          *
- * *         *        * [0100] Reserved                                                *
- * *         *        * [1000] Reserved                                                *
- * *************************************************************************************
- * *  [7:4]  *  PMS   * Indicates which of the Masters on                              *
- * *         *        * ARBS was previously                                            *
- * *         *        * accessing the AHBS.                                            *
- * *         *        * [0001] Gasket                                                  *
- * *         *        * [0010] AHB-AHB Bridge                                          *
- * *         *        * [0100] PCI                                                     *
- * *         *        * [1000] APB                                                     *
- * *************************************************************************************
- * *  [3:0]  *  PMN   * Indicates which of the Masters on                              *
- * *         *        * ARBN was previously                                            *
- * *         *        * accessing the AHBN.                                            *
- * *         *        * [0001] NPEA                                                    *
- * *         *        * [0010] NPEB                                                    *
- * *         *        * [0100] NPEC                                                    *
- * *         *        * [1000] Reserved                                                *
- * *************************************************************************************
- * </pre>
- *
- * @param *pmsrValue UINT32 [out] - Pointer to return PMSR value. Users need to
- * 							  allocate storage for psmrValue.   
- *
- * @return none 
- *
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- **/
-PUBLIC void
-ixPerfProfAccBusPmuPMSRGet (
-UINT32 *pmsrValue);
-
-
-/** 
- * The APIs below are specifically used for Xcycle module. 
- **/
-
-/**
- * @ingroup IxPerfProfAcc
- * 
- * @fn ixPerfProfAccXcycleBaselineRun (
-		UINT32 *numBaselineCycle) 
- *
- * @brief Perform baseline for Xcycle 
- *
- * @param *numBaselineCycle UINT32 [out] - pointer to baseline value after
- * 					calibration. Calling function are responsible for 
- *					allocating memory space for this pointer. 
- *
- * Global Data  : 
- *                        - None.
- *                        
- * This function MUST be run before the Xcycle tool can be used. This 
- * function must be run immediately when the OS boots up with no other 
- * addition programs running. 
- * Addition note :     This API will measure the time needed to perform
- * a fix amount of CPU instructions (~ 1 second worth of loops) as a 
- * highest priority task and with interrupt disabled. The time measured
- * is known as the baseline - interpreted as the shortest time 
- * needed to complete the amount of CPU instructions. The baseline is 
- * returned as unit of time in 66Mhz clock tick.  
- *
- * @return 
- *      - IX_PERFPROF_ACC_STATUS_SUCCESS - successful run, result is returned
- *      - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL - failed to change
- *         task priority
- *      - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_RESTORE_FAIL - failed to
- *         restore task priority
- *      - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility 
- *         is running 
- *      - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS  - Xcycle 
- *	  tool has already started
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IxPerfProfAccStatus
-ixPerfProfAccXcycleBaselineRun(
-	UINT32 *numBaselineCycle); 
-
-/**
- * @ingroup IxPerfProfAcc
- * 
- * @fn ixPerfProfAccXcycleStart(
-		UINT32 numMeasurementsRequested);
- *
- * @brief Start the measurement
- *
- * @param  numMeasurementsRequested UINT32 [in] - number of measurements 
- *							to perform. Value can be 0 to  
- *							IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS. 
- *							0 indicate continuous measurement. 
- *
- * Global Data  : 
- *                        - None.
- *                        
- * 
- * Start the measurements immediately. 
- * numMeasurementsRequested specifies number of measurements to run. 
- * If numMeasurementsRequested is set to 0, the measurement will
- * be performed continuously until IxPerfProfAccXcycleStop()
- * is called.  
- * It is estimated that 1 measurement takes approximately 1 second during 
- * low CPU utilization, therefore 128 measurement takes approximately 128 sec.
- * When CPU utilization is high, the measurement will take longer.
- * This function spawn a task the perform the measurement and returns. 
- * The measurement may continue even if this function returns. 
- *
- * IMPORTANT: Under heavy CPU utilization, the task spawn by this 
- * function may starve and fail to respond to stop command. User 
- * may need to kill the task manually in this case.  
- *
- * There are only IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS 
- * storage available so storing is wrapped around if measurements are  
- * more than IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS.
- *
- *
- * @return 
- *      - IX_PERFPROF_ACC_STATUS_SUCCESS - successful start, a thread is created 
- *	   in the background to perform measurement. 
- *      - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL - failed to set
- *         task priority
- *      - IX_PERFPROF_ACC_STATUS_XCYCLE_THREAD_CREATE_FAIL - failed to create
- *	   thread to perform measurement.
- *      - IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE - baseline is not available 
- *      - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_REQUEST_OUT_OF_RANGE -
- *	   value is larger than IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS
- *      - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS	- Xcycle tool 
- *	   has already started
- *      - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is 
- *         running
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IxPerfProfAccStatus
-ixPerfProfAccXcycleStart (
-	UINT32 numMeasurementsRequested);  
-
-/**
- * @ingroup IxPerfProfAcc
- * 
- * @fn ixPerfProfAccXcycleStop(void); 
- *
- * @brief Stop the Xcycle measurement
- *
- * @param None
- *
- * Global Data  : 
- *                        - None.
- *                        
- * Stop Xcycle measurements immediately. If the measurements have stopped 
- * or not started, return IX_PERFPROF_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING. 
- * Note: This function does not stop measurement cold. The measurement thread 
- * may need a few seconds to complete the last measurement. User needs to use
- * ixPerfProfAccXcycleInProgress() to determine if measurement is indeed
- * completed. 
- *
- * @return 
- *      - IX_PERFPROF_ACC_STATUS_SUCCESS - successful measurement is stopped
- *      - IX_PERFPROF_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING - no measurement running
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IxPerfProfAccStatus
-ixPerfProfAccXcycleStop(void); 
-
-/**
- * @ingroup IxPerfProfAcc
- * 
- * @fn ixPerfProfAccXcycleResultsGet(
-	IxPerfProfAccXcycleResults *xcycleResult ) 
- *
- * @brief Get the results of Xcycle measurement
- *
- * @param *xcycleResult @ref IxPerfProfAccXcycleResults [out] - Pointer to 
- * 				results of last measurements. Calling function are 
- *				responsible for allocating memory space for this pointer.
- *
- * Global Data  : 
- *                        - None.
- *                        
- * Retrieve the results of last measurement. User should use 
- * ixPerfProfAccXcycleInProgress() to check if measurement is completed 
- * before getting the results.
- *
- * @return 
- *      - IX_PERFPROF_ACC_STATUS_SUCCESS - successful 
- *      - IX_PERFPROF_ACC_STATUS_FAIL - result is not complete. 
- *      - IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE - baseline is performed
- *      - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS  - Xcycle 
- *         tool is still running
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC IxPerfProfAccStatus
-ixPerfProfAccXcycleResultsGet (
-    IxPerfProfAccXcycleResults *xcycleResult);  
-
-/**
- * @ingroup IxPerfProfAcc
- * 
- * @fn ixPerfProfAccXcycleInProgress (void)
- *
- * @brief Check if Xcycle is running
- *
- * @param None
- * Global Data  : 
- *                        - None.
- *                        
- * Check if Xcycle measuring task is running. 
- *
- * @return 
- *      - true - Xcycle is running
- *      - false - Xcycle is not running
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-PUBLIC BOOL
-ixPerfProfAccXcycleInProgress(void); 
-
-#ifdef __linux
-/**
- * @ingroup IxPerfProfAcc
- *
- * @fn ixPerfProfAccXscalePmuTimeSampCreateProcFile 
- *
- * @brief Enables proc file to call module function
- *
- * @param None
- *
- * Global Data  :
- *                        - None.
- *
- * This function is declared globally to enable /proc directory system to call
- * and execute the function when the registered file is called. This function is not meant to 
- * be called by the user.
- *
- * @return
- *      - Length of data written to file.
- *
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-int
-ixPerfProfAccXscalePmuTimeSampCreateProcFile (char *buf, char **start, off_t offset,
-                                      int count, int *eof, void *data);
-
-/**
- * @ingroup IxPerfProfAcc
- *
- * @fn ixPerfProfAccXscalePmuEventSampCreateProcFile 
- *
- * @brief Enables proc file to call module function 
- *
- * @param None
- *
- * Global Data  :
- *                        - None.
- *
- * This function is declared globally to enable /proc directory system to call
- * and execute the function when the registered file is called. This function is not meant to 
- * be called by the user.
- *
- * @return
- *      - Length of data written to file.
- *
- * @li   Reentrant    : no
- * @li   ISR Callable : no
- *
- */
-int
-ixPerfProfAccXscalePmuEventSampCreateProcFile (char *buf, char **start, off_t offset,
-                                      int count, int *eof, void *data);
-
-
-#endif /* ifdef __linux */
-
-#endif /* ndef IXPERFPROFACC_H */
-
-/**
- *@} defgroup IxPerfProfAcc 
- */
-
-
diff --git a/drivers/net/npe/include/IxQMgr.h b/drivers/net/npe/include/IxQMgr.h
deleted file mode 100644
index 23a4541..0000000
--- a/drivers/net/npe/include/IxQMgr.h
+++ /dev/null
@@ -1,2186 +0,0 @@
-/**
- * @file    IxQMgr.h
- *
- * @date    30-Oct-2001
- *
- * @brief This file contains the public API of IxQMgr component.
- *
- * Some functions contained in this module are inline to achieve better
- * data-path performance. For this to work, the function definitions are
- * contained in this header file. The "normal" use of inline functions
- * is to use the inline functions in the module in which they are
- * defined. In this case these inline functions are used in external
- * modules and therefore the use of "inline extern". What this means
- * is as follows: if a function foo is declared as "inline extern" this
- * definition is only used for inlining, in no case is the function
- * compiled on its own. If the compiler cannot inline the function it
- * becomes an external reference. Therefore in IxQMgrQAccess.c all
- * inline functions are defined without the "inline extern" specifier
- * and so define the external references. In all other source files
- * including this header file, these funtions are defined as "inline
- * extern".
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/* ------------------------------------------------------
-   Doxygen group definitions
-   ------------------------------------------------------ */
-/**
- * @defgroup IxQMgrAPI IXP400 Queue Manager (IxQMgr) API
- *
- * @brief The public API for the IXP400 QMgr component.
- *
- * IxQMgr is a low level interface to the AHB Queue Manager
- *
- * @{
- */
-
-#ifndef IXQMGR_H
-#define IXQMGR_H
-
-/*
- * User defined include files
- */
-
-#include "IxOsal.h"
-
-/* 
- * Define QMgr's IoMem macros, in DC mode if in LE 
- * regular if in BE. (Note: For Linux LSP gold release
- * may need to adjust mode.
- */
-#if defined (__BIG_ENDIAN)
-
-#define IX_QMGR_INLINE_READ_LONG IX_OSAL_READ_LONG_BE
-#define IX_QMGR_INLINE_WRITE_LONG IX_OSAL_WRITE_LONG_BE
-
-#else
-
-#define IX_QMGR_INLINE_READ_LONG IX_OSAL_READ_LONG_LE_DC
-#define IX_QMGR_INLINE_WRITE_LONG IX_OSAL_WRITE_LONG_LE_DC
-
-#endif
-
-/*
- * #defines and macros
- */
-
-/**
-*
-* @ingroup IxQMgrAPI
-*
-* @def IX_QMGR_INLINE
-*
-* @brief Inline definition, for inlining of Queue Access functions on API
-*
-* Please read the header information in this file for more details on the
-* use of function inlining in this component.
-*
-*/
-
-#ifndef __wince
-
-#ifdef IXQMGRQACCESS_C
-/* If IXQMGRQACCESS_C is set then the IxQmgrQAccess.c is including this file
-   and must instantiate a concrete definition for each inlineable API function
-   whether or not that function actually gets inlined. */
-#    ifdef NO_INLINE_APIS
-#        undef NO_INLINE_APIS
-#    endif
-#    define IX_QMGR_INLINE  /* Empty Define */
-#else
-#    ifndef NO_INLINE_APIS
-#       define IX_QMGR_INLINE IX_OSAL_INLINE_EXTERN
-#    else
-#       define IX_QMGR_INLINE /* Empty Define */
-#    endif
-#endif
-
-#else /* ndef __wince */
-
-#    ifndef NO_INLINE_APIS
-#       define NO_INLINE_APIS
-#    endif
-#    define IX_QMGR_INLINE
-
-#endif
-
-
-/**
-*
-* @ingroup IxQMgrAPI
-*
-* @def IX_QMGR_MAX_NUM_QUEUES
-*
-* @brief Number of queues supported by the AQM.
-*
-* This constant is used to indicate the number of AQM queues
-*
-*/
-#define IX_QMGR_MAX_NUM_QUEUES  64
-
-/**
-*
-* @ingroup IxQMgrAPI
-*
-* @def IX_QMGR_MIN_QID
-*
-* @brief Minimum queue identifier.
-*
-* This constant is used to indicate the smallest queue identifier
-*
-*/
-#define IX_QMGR_MIN_QID IX_QMGR_QUEUE_0
-
-/**
-*
-* @ingroup IxQMgrAPI
-*
-* @def IX_QMGR_MAX_QID
-*
-* @brief Maximum queue identifier.
-*
-* This constant is used to indicate the largest queue identifier
-*
-*/
-#define IX_QMGR_MAX_QID IX_QMGR_QUEUE_63
-
-/**
-*
-* @ingroup IxQMgrAPI
-*
-* @def IX_QMGR_MIN_QUEUPP_QID
-*
-* @brief Minimum queue identifier for reduced functionality queues.
-*
-* This constant is used to indicate Minimum queue identifier for reduced
-* functionality queues
-*
-*/
-#define IX_QMGR_MIN_QUEUPP_QID 32
-
-/**
-*
-* @ingroup IxQMgrAPI
-*
-* @def IX_QMGR_MAX_QNAME_LEN
-*
-* @brief Maximum queue name length.
-*
-* This constant is used to indicate the maximum null terminated string length
-* (excluding '\0') for a queue name
-*
-*/
-#define IX_QMGR_MAX_QNAME_LEN 16
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_WARNING
- *
- * @brief Warning return code.
- *
- * Execution complete, but there is a special case to handle
- *
- */
-#define IX_QMGR_WARNING 2
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_PARAMETER_ERROR
- *
- * @brief Parameter error return code (NULL pointer etc..).
- *
- * parameter error out of range/invalid
- *
- */
-#define IX_QMGR_PARAMETER_ERROR 3
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_INVALID_Q_ENTRY_SIZE
- *
- * @brief Invalid entry size return code.
- *
- * Invalid queue entry size for a queue read/write
- *
- */
-#define IX_QMGR_INVALID_Q_ENTRY_SIZE 4
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_INVALID_Q_ID
- *
- * @brief Invalid queue identifier return code.
- *
- * Invalid queue id, not in range 0-63
- *
- */
-#define IX_QMGR_INVALID_Q_ID 5
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_INVALID_CB_ID
- *
- * @brief Invalid callback identifier return code.
- *
- * Invalid callback id
- */
-#define IX_QMGR_INVALID_CB_ID 6
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_CB_ALREADY_SET
- *
- * @brief Callback set error return code.
- *
- * The specified callback has already been for this queue
- *
- */
-#define IX_QMGR_CB_ALREADY_SET 7
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_NO_AVAILABLE_SRAM
- *
- * @brief Sram consumed return code.
- *
- * All AQM Sram is consumed by queue configuration
- *
- */
-#define IX_QMGR_NO_AVAILABLE_SRAM 8
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_INVALID_INT_SOURCE_ID
- *
- * @brief Invalid queue interrupt source identifier return code.
- *
- * Invalid queue interrupt source given for notification enable
- */
-#define IX_QMGR_INVALID_INT_SOURCE_ID 9
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_INVALID_QSIZE
- *
- * @brief Invalid queue size error code.
- *
- * Invalid queue size not one of 16,32, 64, 128
- *
- *
- */
-#define IX_QMGR_INVALID_QSIZE 10
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_INVALID_Q_WM
- *
- * @brief Invalid queue watermark return code.
- *
- * Invalid queue watermark given for watermark set
- */
-#define IX_QMGR_INVALID_Q_WM 11
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_Q_NOT_CONFIGURED
- *
- * @brief Queue not configured return code.
- *
- * Returned to the client when a function has been called on an unconfigured
- * queue
- *
- */
-#define IX_QMGR_Q_NOT_CONFIGURED 12
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_Q_ALREADY_CONFIGURED
- *
- * @brief Queue already configured return code.
- *
- * Returned to client to indicate that a queue has already been configured
- */
-#define IX_QMGR_Q_ALREADY_CONFIGURED 13
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_Q_UNDERFLOW
- *
- * @brief Underflow return code.
- *
- * Underflow on a queue read has occurred
- *
- */
-#define IX_QMGR_Q_UNDERFLOW 14
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_Q_OVERFLOW
- *
- * @brief Overflow return code.
- *
- * Overflow on a queue write has occurred
- *
- */
-#define IX_QMGR_Q_OVERFLOW 15
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_Q_INVALID_PRIORITY
- *
- * @brief Invalid priority return code.
- *
- * Invalid priority, not one of 0,1,2
- */
-#define IX_QMGR_Q_INVALID_PRIORITY 16
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS
- *
- * @brief  Entry index out of bounds return code.
- *
- * Entry index is greater than number of entries in queue.
- */
-#define IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS 17
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def ixQMgrDispatcherLoopRun
- *
- * @brief  Map old function name ixQMgrDispatcherLoopRun () 
- *         to @ref ixQMgrDispatcherLoopRunA0 ().
- *
- */
-#define ixQMgrDispatcherLoopRun ixQMgrDispatcherLoopRunA0
-
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @def IX_QMGR_QUEUE
- *
- * @brief  Definition of AQM queue numbers
- *
- */
-#define IX_QMGR_QUEUE_0 (0)      /**< Queue Number 0 */
-#define IX_QMGR_QUEUE_1 (1)      /**< Queue Number 1 */
-#define IX_QMGR_QUEUE_2 (2)      /**< Queue Number 2 */
-#define IX_QMGR_QUEUE_3 (3)      /**< Queue Number 3 */
-#define IX_QMGR_QUEUE_4 (4)      /**< Queue Number 4 */
-#define IX_QMGR_QUEUE_5 (5)      /**< Queue Number 5 */
-#define IX_QMGR_QUEUE_6 (6)      /**< Queue Number 6 */
-#define IX_QMGR_QUEUE_7 (7)      /**< Queue Number 7 */
-#define IX_QMGR_QUEUE_8 (8)      /**< Queue Number 8 */
-#define IX_QMGR_QUEUE_9 (9)      /**< Queue Number 9 */
-#define IX_QMGR_QUEUE_10 (10)    /**< Queue Number 10 */
-#define IX_QMGR_QUEUE_11 (11)    /**< Queue Number 11 */
-#define IX_QMGR_QUEUE_12 (12)    /**< Queue Number 12 */
-#define IX_QMGR_QUEUE_13 (13)    /**< Queue Number 13 */
-#define IX_QMGR_QUEUE_14 (14)    /**< Queue Number 14 */
-#define IX_QMGR_QUEUE_15 (15)    /**< Queue Number 15 */
-#define IX_QMGR_QUEUE_16 (16)    /**< Queue Number 16 */
-#define IX_QMGR_QUEUE_17 (17)    /**< Queue Number 17 */
-#define IX_QMGR_QUEUE_18 (18)    /**< Queue Number 18 */
-#define IX_QMGR_QUEUE_19 (19)    /**< Queue Number 19 */
-#define IX_QMGR_QUEUE_20 (20)    /**< Queue Number 20 */
-#define IX_QMGR_QUEUE_21 (21)    /**< Queue Number 21 */
-#define IX_QMGR_QUEUE_22 (22)    /**< Queue Number 22 */
-#define IX_QMGR_QUEUE_23 (23)    /**< Queue Number 23 */
-#define IX_QMGR_QUEUE_24 (24)    /**< Queue Number 24 */
-#define IX_QMGR_QUEUE_25 (25)    /**< Queue Number 25 */
-#define IX_QMGR_QUEUE_26 (26)    /**< Queue Number 26 */
-#define IX_QMGR_QUEUE_27 (27)    /**< Queue Number 27 */
-#define IX_QMGR_QUEUE_28 (28)    /**< Queue Number 28 */
-#define IX_QMGR_QUEUE_29 (29)    /**< Queue Number 29 */
-#define IX_QMGR_QUEUE_30 (30)    /**< Queue Number 30 */
-#define IX_QMGR_QUEUE_31 (31)    /**< Queue Number 31 */
-#define IX_QMGR_QUEUE_32 (32)    /**< Queue Number 32 */
-#define IX_QMGR_QUEUE_33 (33)    /**< Queue Number 33 */
-#define IX_QMGR_QUEUE_34 (34)    /**< Queue Number 34 */
-#define IX_QMGR_QUEUE_35 (35)    /**< Queue Number 35 */
-#define IX_QMGR_QUEUE_36 (36)    /**< Queue Number 36 */
-#define IX_QMGR_QUEUE_37 (37)    /**< Queue Number 37 */
-#define IX_QMGR_QUEUE_38 (38)    /**< Queue Number 38 */
-#define IX_QMGR_QUEUE_39 (39)    /**< Queue Number 39 */
-#define IX_QMGR_QUEUE_40 (40)    /**< Queue Number 40 */
-#define IX_QMGR_QUEUE_41 (41)    /**< Queue Number 41 */
-#define IX_QMGR_QUEUE_42 (42)    /**< Queue Number 42 */
-#define IX_QMGR_QUEUE_43 (43)    /**< Queue Number 43 */
-#define IX_QMGR_QUEUE_44 (44)    /**< Queue Number 44 */
-#define IX_QMGR_QUEUE_45 (45)    /**< Queue Number 45 */
-#define IX_QMGR_QUEUE_46 (46)    /**< Queue Number 46 */
-#define IX_QMGR_QUEUE_47 (47)    /**< Queue Number 47 */
-#define IX_QMGR_QUEUE_48 (48)    /**< Queue Number 48 */
-#define IX_QMGR_QUEUE_49 (49)    /**< Queue Number 49 */
-#define IX_QMGR_QUEUE_50 (50)    /**< Queue Number 50 */
-#define IX_QMGR_QUEUE_51 (51)    /**< Queue Number 51 */
-#define IX_QMGR_QUEUE_52 (52)    /**< Queue Number 52 */
-#define IX_QMGR_QUEUE_53 (53)    /**< Queue Number 53 */
-#define IX_QMGR_QUEUE_54 (54)    /**< Queue Number 54 */
-#define IX_QMGR_QUEUE_55 (55)    /**< Queue Number 55 */
-#define IX_QMGR_QUEUE_56 (56)    /**< Queue Number 56 */
-#define IX_QMGR_QUEUE_57 (57)    /**< Queue Number 57 */
-#define IX_QMGR_QUEUE_58 (58)    /**< Queue Number 58 */
-#define IX_QMGR_QUEUE_59 (59)    /**< Queue Number 59 */
-#define IX_QMGR_QUEUE_60 (60)    /**< Queue Number 60 */
-#define IX_QMGR_QUEUE_61 (61)    /**< Queue Number 61 */
-#define IX_QMGR_QUEUE_62 (62)    /**< Queue Number 62 */
-#define IX_QMGR_QUEUE_63 (63)    /**< Queue Number 63 */
-#define IX_QMGR_QUEUE_INVALID (64)     /**< AQM Queue Number Delimiter */
-
-
-/*
- * Typedefs
- */
-
-/**
- * @typedef IxQMgrQId
- *
- * @ingroup IxQMgrAPI
- *
- * @brief Used in the API to identify the AQM queues.
- *
- */
-typedef int IxQMgrQId;
-
-/**
- * @typedef IxQMgrQStatus
- *
- * @ingroup IxQMgrAPI
- *
- * @brief Queue status.
- *
- * A queues status is defined by its relative fullness or relative emptiness.
- * Each of the queues 0-31 have Nearly Empty, Nearly Full, Empty, Full,
- * Underflow and Overflow status flags. Queues 32-63 have just Nearly Empty and
- * Full status flags.
- * The flags bit positions are outlined below:
- *        
- *        OF - bit-5<br> 
- *        UF - bit-4<br> 
- *         F - bit-3<br> 
- *        NF - bit-2<br> 
- *        NE - bit-1<br>
- *         E - bit-0<br> 
- *
- */
-typedef UINT32 IxQMgrQStatus;
-
-/**
- * @enum IxQMgrQStatusMask
- *
- * @ingroup IxQMgrAPI
- *
- * @brief Queue status mask.
- *
- * Masks for extracting the individual status flags from the IxQMgrStatus
- * word.
- *
- */
-typedef enum
-{
-    IX_QMGR_Q_STATUS_E_BIT_MASK  = 0x1,
-    IX_QMGR_Q_STATUS_NE_BIT_MASK = 0x2,
-    IX_QMGR_Q_STATUS_NF_BIT_MASK = 0x4,
-    IX_QMGR_Q_STATUS_F_BIT_MASK  = 0x8,
-    IX_QMGR_Q_STATUS_UF_BIT_MASK = 0x10,
-    IX_QMGR_Q_STATUS_OF_BIT_MASK = 0x20
-} IxQMgrQStatusMask;
-
-/**
- * @enum IxQMgrSourceId
- *
- * @ingroup IxQMgrAPI
- *
- * @brief Queue interrupt source select.
- *
- * This enum defines the different source conditions on a queue that result in
- * an interrupt being fired by the AQM. Interrupt source is configurable for
- * queues 0-31 only. The interrupt source for queues 32-63 is hardwired to the
- * NE(Nearly Empty) status flag.
- *
- */
-typedef enum
-{
-    IX_QMGR_Q_SOURCE_ID_E = 0,  /**< Queue Empty due to last read             */
-    IX_QMGR_Q_SOURCE_ID_NE,     /**< Queue Nearly Empty due to last read      */
-    IX_QMGR_Q_SOURCE_ID_NF,     /**< Queue Nearly Full due to last write      */
-    IX_QMGR_Q_SOURCE_ID_F,      /**< Queue Full due to last write             */
-    IX_QMGR_Q_SOURCE_ID_NOT_E,  /**< Queue Not Empty due to last write        */
-    IX_QMGR_Q_SOURCE_ID_NOT_NE, /**< Queue Not Nearly Empty due to last write */
-    IX_QMGR_Q_SOURCE_ID_NOT_NF, /**< Queue Not Nearly Full due to last read   */
-    IX_QMGR_Q_SOURCE_ID_NOT_F   /**< Queue Not Full due to last read          */
-} IxQMgrSourceId;
-
-/**
- * @enum IxQMgrQEntrySizeInWords
- *
- * @ingroup IxQMgrAPI
- *
- * @brief QMgr queue entry sizes.
- *
- * The entry size of a queue specifies the size of a queues entry in words.
- *
- */
-typedef enum
-{
-    IX_QMGR_Q_ENTRY_SIZE1 = 1,   /**< 1 word entry       */
-    IX_QMGR_Q_ENTRY_SIZE2 = 2,   /**< 2 word entry       */
-    IX_QMGR_Q_ENTRY_SIZE4 = 4    /**< 4 word entry       */
-} IxQMgrQEntrySizeInWords;
-
-/**
- * @enum IxQMgrQSizeInWords
- *
- * @ingroup IxQMgrAPI
- *
- * @brief QMgr queue sizes.
- *
- * These values define the allowed queue sizes for AQM queue. The sizes are
- * specified in words.
- *
- */
-typedef enum
-{
-    IX_QMGR_Q_SIZE16 = 16,   /**< 16 word buffer     */
-    IX_QMGR_Q_SIZE32 = 32,   /**< 32 word buffer     */
-    IX_QMGR_Q_SIZE64 = 64,   /**< 64 word buffer     */
-    IX_QMGR_Q_SIZE128 = 128, /**< 128 word buffer    */
-    IX_QMGR_Q_SIZE_INVALID = 129  /**< Insure that this is greater than largest
-				    * queue size supported by the hardware
-				    */
-} IxQMgrQSizeInWords;
-
-/**
- * @enum IxQMgrWMLevel
- *
- * @ingroup IxQMgrAPI
- *
- * @brief QMgr watermark levels.
- *
- * These values define the valid watermark levels(in ENTRIES) for queues. Each
- * queue 0-63 have configurable Nearly full and Nearly empty watermarks. For
- * queues 32-63 the Nearly full watermark has NO EFFECT.
- * If the Nearly full watermark is set to IX_QMGR_Q_WM_LEVEL16 this means that
- * the nearly full flag will be set by the hardware when there are >= 16 empty
- * entries in the specified queue.
- * If the Nearly empty watermark is set to IX_QMGR_Q_WM_LEVEL16 this means that
- * the Nearly empty flag will be set by the hardware when there are <= 16 full
- * entries in the specified queue.
- */
-typedef enum
-{
-    IX_QMGR_Q_WM_LEVEL0 = 0,    /**< 0 entry watermark  */
-    IX_QMGR_Q_WM_LEVEL1 = 1,    /**< 1 entry watermark  */
-    IX_QMGR_Q_WM_LEVEL2 = 2,    /**< 2 entry watermark  */
-    IX_QMGR_Q_WM_LEVEL4 = 4,    /**< 4 entry watermark  */
-    IX_QMGR_Q_WM_LEVEL8 = 8,    /**< 8 entry watermark  */
-    IX_QMGR_Q_WM_LEVEL16 = 16,  /**< 16 entry watermark */
-    IX_QMGR_Q_WM_LEVEL32 = 32,  /**< 32 entry watermark */
-    IX_QMGR_Q_WM_LEVEL64 = 64   /**< 64 entry watermark */
-} IxQMgrWMLevel;
-
-/**
- * @ingroup IxQMgrAPI
- * 
- * @enum IxQMgrDispatchGroup
- *
- * @brief QMgr dispatch group select identifiers.
- *
- * This enum defines the groups over which the  dispatcher will process when
- * called. One of the enum values must be used as a input to
- * @a ixQMgrDispatcherLoopRunA0, @a ixQMgrDispatcherLoopRunB0 
- * or @a ixQMgrDispatcherLoopRunB0LLP.
- *
- */
-typedef enum
-{
-    IX_QMGR_QUELOW_GROUP = 0, /**< Queues 0-31  */
-    IX_QMGR_QUEUPP_GROUP      /**< Queues 32-63 */
-} IxQMgrDispatchGroup;
-
-/**
- * @ingroup IxQMgrAPI
- * 
- * @enum IxQMgrPriority
- *
- * @brief Dispatcher priority levels.
- *
- * This enum defines the different queue dispatch priority levels.
- * The lowest priority number (0) is the highest priority level.
- *
- */
-typedef enum
-{
-  IX_QMGR_Q_PRIORITY_0 = 0,  /**< Priority level 0 */
-  IX_QMGR_Q_PRIORITY_1,      /**< Priority level 1 */
-  IX_QMGR_Q_PRIORITY_2,      /**< Priority level 2 */
-  IX_QMGR_Q_PRIORITY_INVALID /**< Invalid Priority level */
-} IxQMgrPriority;
-
-/**
- * @ingroup IxQMgrAPI
- *
- * @enum IxQMgrType
- *
- * @brief Callback types as used with livelock prevention
- *
- * This enum defines the different callback types. 
- * These types are only used when Livelock prevention is enabled.
- * The default is IX_QMGR_TYPE_REALTIME_OTHER. 
- *
- */
-
-typedef enum
-{
-  IX_QMGR_TYPE_REALTIME_OTHER = 0, /**< Real time callbacks-always allowed run*/
-  IX_QMGR_TYPE_REALTIME_PERIODIC,  /**< Periodic callbacks-always allowed run */
-  IX_QMGR_TYPE_REALTIME_SPORADIC   /**< Sporadic callbacks-only run if no
-                                        periodic callbacks are in progress    */
-} IxQMgrType;
-
-
-/**
- * @ingroup IxQMgrAPI
- * 
- * @typedef IxQMgrCallbackId
- *
- * @brief Uniquely identifies a callback function.
- *
- * A unique callback identifier associated with each callback
- * registered by clients.
- *
- */
-typedef unsigned IxQMgrCallbackId;
-
-/**
- * @typedef IxQMgrCallback
- *
- * @brief QMgr notification callback type.
- *
- * This defines the interface to all client callback functions.
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier
- * @param cbId @ref IxQMgrCallbackId [in] - the callback identifier
- */
-typedef void (*IxQMgrCallback)(IxQMgrQId qId,
-                               IxQMgrCallbackId cbId);
-
-/**
- * @ingroup IxQMgrAPI
- *
- * @typedef IxQMgrDispatcherFuncPtr
- *
- * @brief QMgr Dispatcher Loop function pointer.
- *
- * This defines the interface for QMgr Dispather functions.
- *
- * @param group @ref IxQMgrDispatchGroup [in] - the group of the 
- *                  queue of which the dispatcher will run   
- */
-typedef void (*IxQMgrDispatcherFuncPtr)(IxQMgrDispatchGroup group);
-
-/*
- * Function Prototypes
- */
-
-/* ------------------------------------------------------------
-   Initialisation related functions
-   ---------------------------------------------------------- */
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrInit (void)
- *
- * @brief Initialise the QMgr.
- *
- * This function must be called before and other QMgr function. It
- * sets up internal data structures.
- *
- * @return @li IX_SUCCESS, the IxQMgr successfully initialised
- * @return @li IX_FAIL, failed to initialize the Qmgr
- *
- */
-PUBLIC IX_STATUS
-ixQMgrInit (void);
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrUnload (void)
- *
- * @brief Uninitialise the QMgr.
- *
- * This function will perform the tasks required to unload the QMgr component
- * cleanly.  This includes unmapping kernel memory.
- * This should be called before a soft reboot or unloading of a kernel module.
- *
- * @pre It should only be called if @ref ixQMgrInit has already been called.
- *
- * @post No QMgr functions should be called until ixQMgrInit is called again.
- *
- * @return @li IX_SUCCESS, the IxQMgr successfully uninitialised
- * @return @li IX_FAIL, failed to uninitialize the Qmgr
- *
- */
-PUBLIC IX_STATUS
-ixQMgrUnload (void);
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrShow (void)
- *
- * @brief Describe queue configuration and statistics for active queues.
- *
- * This function shows active queues, their configurations and statistics.
- *
- * @return @li void
- *
- */
-PUBLIC void
-ixQMgrShow (void);
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrQShow (IxQMgrQId qId)
- *
- * @brief Display aqueue configuration and statistics for a queue.
- *
- * This function shows queue configuration and statistics for a queue.
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier.
- *
- * @return @li IX_SUCCESS, success
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId
- *
- */
-PUBLIC IX_STATUS
-ixQMgrQShow (IxQMgrQId qId);
-
-
-/* ------------------------------------------------------------
-   Configuration related functions
-   ---------------------------------------------------------- */
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQConfig (char *qName,
-	       IxQMgrQId qId,
-	       IxQMgrQSizeInWords qSizeInWords,
-	       IxQMgrQEntrySizeInWords qEntrySizeInWords)
- *
- * @brief Configure an AQM queue.
- *
- * This function is called by a client to setup a queue. The size and entrySize
- * qId and qName(NULL pointer) are checked for valid values. This function must
- * be called for each queue, before any queue accesses are made and after
- * ixQMgrInit() has been called. qName is assumed to be a '\0' terminated array
- * of 16 charachters or less.
- *
- * @param *qName char [in] - is the name provided by the client and is associated
- *                          with a QId by the QMgr.
- * @param qId @ref IxQMgrQId [in]  - the qId of this queue
- * @param qSizeInWords @ref IxQMgrQSize [in] - the size of the queue can be one of 16,32
- *                                       64, 128 words.
- * @param qEntrySizeInWords @ref IxQMgrQEntrySizeInWords [in] - the size of a queue entry
- *                                                        can be one of 1,2,4 words.
- *
- * @return @li IX_SUCCESS, a specified queue has been successfully configured.
- * @return @li IX_FAIL, IxQMgr has not been initialised.
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s).
- * @return @li IX_QMGR_INVALID_QSIZE, invalid queue size
- * @return @li IX_QMGR_INVALID_Q_ID, invalid queue id
- * @return @li IX_QMGR_INVALID_Q_ENTRY_SIZE, invalid queue entry size
- * @return @li IX_QMGR_Q_ALREADY_CONFIGURED, queue already configured
- *
- */
-PUBLIC IX_STATUS
-ixQMgrQConfig (char *qName,
-	       IxQMgrQId qId,
-	       IxQMgrQSizeInWords qSizeInWords,
-	       IxQMgrQEntrySizeInWords qEntrySizeInWords);
-
-/**
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQSizeInEntriesGet (IxQMgrQId qId,
-			 unsigned *qSizeInEntries)
- *
- * @brief Return the size of a queue in entries.
- *
- * This function returns the the size of the queue in entriese.
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier
- * @param *qSizeInEntries @ref IxQMgrQSize [out] - queue size in entries
- *
- * @return @li IX_SUCCESS, successfully retrieved the number of full entrie
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s).
- *
- */
-PUBLIC IX_STATUS
-ixQMgrQSizeInEntriesGet (IxQMgrQId qId,
-			 unsigned *qSizeInEntries);
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrWatermarkSet (IxQMgrQId qId,
-		    IxQMgrWMLevel ne,
-		    IxQMgrWMLevel nf)
- *
- * @brief Set the Nearly Empty and Nearly Full Watermarks fo a queue.
- *
- * This function is called by a client to set the watermarks NE and NF for the
- * queue specified by qId.
- * The queue must be empty at the time this function is called, it is the clients
- * responsibility to ensure that the queue is empty.
- * This function will read the status of the queue before the watermarks are set
- * and again after the watermarks are set. If the status register has changed,
- * due to a queue access by an NPE for example, a warning is returned.
- * Queues 32-63 only support the NE flag, therefore the value of nf will be ignored
- * for these queues.
- *
- * @param qId @ref IxQMgrQId [in] -  the QId of the queue.
- * @param ne @ref IxQMgrWMLevel [in]  - the NE(Nearly Empty) watermark for this
- *                                 queue. Valid values are 0,1,2,4,8,16,32 and
- *                                 64 entries.
- * @param nf @ref IxQMgrWMLevel [in] - the NF(Nearly Full) watermark for this queue.
- *                                 Valid values are 0,1,2,4,8,16,32 and 64
- *                                 entries.
- *
- * @return @li IX_SUCCESS, watermarks have been set for the queu
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId
- * @return @li IX_QMGR_INVALID_Q_WM, invalid watermark
- * @return @li IX_QMGR_WARNING, the status register may not be constistent
- *
- */
-PUBLIC IX_STATUS
-ixQMgrWatermarkSet (IxQMgrQId qId,
-		    IxQMgrWMLevel ne,
-		    IxQMgrWMLevel nf);
-
-/**
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrAvailableSramAddressGet (UINT32 *address,
-			       unsigned *sizeOfFreeSram)
- *
- * @brief Return the address of available AQM SRAM.
- *
- * This function returns the starting address in AQM SRAM not used by the
- * current queue configuration and should only be called after all queues
- * have been configured.
- * Calling this function before all queues have been configured will will return
- * the currently available SRAM. A call to configure another queue will use some
- * of the available SRAM.
- * The amount of SRAM available is specified in sizeOfFreeSram. The address is the
- * address of the bottom of available SRAM. Available SRAM extends from address
- * from address to address + sizeOfFreeSram.
- *
- * @param **address UINT32 [out] - the address of the available SRAM, NULL if
- *                                none available.
- * @param *sizeOfFreeSram unsigned [out]- the size in words of available SRAM
- *
- * @return @li IX_SUCCESS, there is available SRAM and is pointed to by address
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s)
- * @return @li IX_QMGR_NO_AVAILABLE_SRAM, all AQM SRAM is consumed by the queue
- *             configuration.
- *
- */
-PUBLIC IX_STATUS
-ixQMgrAvailableSramAddressGet (UINT32 *address,
-			       unsigned *sizeOfFreeSram);
-
-
-/* ------------------------------------------------------------
-   Queue access related functions
-   ---------------------------------------------------------- */
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQReadWithChecks (IxQMgrQId qId,
-                       UINT32 *entry)
- *
- * @brief Read an entry from a queue.
- *
- * This function reads an entire entry from a queue returning it in entry. The
- * queue configuration word is read to determine what entry size this queue is
- * configured for and then the number of words specified by the entry size is
- * read.  entry must be a pointer to a previously allocated array of sufficient
- * size to hold an entry.
- *
- * @note - IX_QMGR_Q_UNDERFLOW is only returned for queues 0-31 as queues 32-63
- * do not have an underflow status maintained.
- *
- * @param  qId @ref IxQMgrQId [in]   - the queue identifier.
- * @param  *entry UINT32 [out]  - pointer to the entry word(s).
- *
- * @return @li IX_SUCCESS, entry was successfully read.
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s).
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId
- * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue
- *
- */
-PUBLIC IX_STATUS
-ixQMgrQReadWithChecks (IxQMgrQId qId,
-                       UINT32 *entry);
-
-
-
-/** 
- * @brief Internal structure to facilitate inlining functions in IxQMgr.h
- */
-typedef struct
-{
-    /* fields related to write functions */
-    UINT32 qOflowStatBitMask;         /**< overflow status mask */
-    UINT32 qWriteCount;               /**< queue write count */
-
-    /* fields related to read and write functions */
-    volatile UINT32 *qAccRegAddr;     /**< access register */
-    volatile UINT32 *qUOStatRegAddr;  /**< status register */
-    volatile UINT32 *qConfigRegAddr;  /**< config register */
-    UINT32 qEntrySizeInWords;         /**< queue entry size in words */
-    UINT32 qSizeInEntries;            /**< queue size in entries */
-
-    /* fields related to read functions */
-    UINT32 qUflowStatBitMask;         /**< underflow status mask */
-    UINT32 qReadCount;                /**< queue read count */
-} IxQMgrQInlinedReadWriteInfo;
-
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrQReadMWordsMinus1 (IxQMgrQId qId,
-			        UINT32 *entry)
- *
- * @brief This function reads the remaining of the q entry
- *        for queues configured with many words.
- *        (the first word of the entry is already read 
- *        in the inlined function and the entry pointer already
- *        incremented
- *
- * @param  qId @ref IxQMgrQId [in]  - the queue identifier.
- * @param  *entry UINT32 [out] - pointer to the entry word(s).
- *
- * @return @li IX_SUCCESS, entry was successfully read.
- * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue
- *
- */
-PUBLIC IX_STATUS
-ixQMgrQReadMWordsMinus1 (IxQMgrQId qId,
-			 UINT32 *entry);
-
-
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQRead (IxQMgrQId qId,
-	     UINT32 *entry)
- *
- * @brief Fast read of an entry from a queue.
- *
- * This function is a heavily streamlined version of ixQMgrQReadWithChecks(),
- * but performs essentially the same task.  It reads an entire entry from a
- * queue, returning it in entry which must be a pointer to a previously
- * allocated array of sufficient size to hold an entry.
- *
- * @note - This function is inlined, to reduce unnecessary function call
- * overhead.  It does not perform any parameter checks, or update any statistics.
- * Also, it does not check that the queue specified by qId has been configured.
- * or is in range. It simply reads an entry from the queue, and checks for
- * underflow.
- *
- * @note - IX_QMGR_Q_UNDERFLOW is only returned for queues 0-31 as queues 32-63
- * do not have an underflow status maintained.
- *
- * @param  qId @ref IxQMgrQId [in] - the queue identifier.
- * @param  *entry UINT32 [out] - pointer to the entry word(s).
- *
- * @return @li IX_SUCCESS, entry was successfully read.
- * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue
- *
- */
-#ifdef NO_INLINE_APIS
-PUBLIC IX_STATUS
-ixQMgrQRead (IxQMgrQId qId,
-             UINT32 *entryPtr);
-#else 
-extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[];
-extern IX_STATUS ixQMgrQReadMWordsMinus1 (IxQMgrQId qId, UINT32 *entryPtr);
-
-IX_QMGR_INLINE PUBLIC IX_STATUS
-ixQMgrQRead (IxQMgrQId qId,
-             UINT32 *entryPtr);
-#endif
-
-IX_QMGR_INLINE PUBLIC IX_STATUS
-ixQMgrQRead (IxQMgrQId qId,
-	     UINT32 *entryPtr)
-#ifdef NO_INLINE_APIS
-    ;
-#else
-{
-    IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    UINT32 entry, entrySize;
-
-    /* get a new entry */
-    entrySize = infoPtr->qEntrySizeInWords;
-    entry = IX_QMGR_INLINE_READ_LONG(infoPtr->qAccRegAddr);
-
-    if (entrySize != IX_QMGR_Q_ENTRY_SIZE1)
-    {	
-	*entryPtr = entry;
-	/* process the remaining part of the entry */
-	return ixQMgrQReadMWordsMinus1(qId, entryPtr);
-    }
-
-    /* underflow is available for lower queues only */
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-	/* the counter of queue entries is decremented. In happy 
-	 * day scenario there are many entries in the queue
-	 * and the counter does not reach zero.
-	 */
-	if (infoPtr->qReadCount-- == 0)
-	{
-	    /* There is maybe no entry in the queue
-	     * qReadCount is now negative, but will be corrected before
-	     * the function returns.
-	     */
-	    UINT32 qPtrs; /* queue internal pointers */
-
-	    /* when a queue is empty, the hw guarantees to return 
-	     * a null value. If the value is not null, the queue is
-	     * not empty.
-	     */
-	    if (entry == 0)
-	    {
-		/* get the queue status */
-		UINT32 status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr);
-	
-		/* check the underflow status */
-		if (status & infoPtr->qUflowStatBitMask)
-		{
-		    /* the queue is empty 
-		    *  clear the underflow status bit if it was set 
-		    */
-		    IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr,
-					 status & ~infoPtr->qUflowStatBitMask);
-		    *entryPtr = 0;
-		    infoPtr->qReadCount = 0;
-		    return IX_QMGR_Q_UNDERFLOW;
-		}
-	    }
-	    /* store the result */
-	    *entryPtr = entry;
-
-	    /* No underflow occured : someone is filling the queue
-	     * or the queue contains null entries.
-	     * The current counter needs to be
-	     * updated from the current number of entries in the queue
-	     */
-
-	    /* get snapshot of queue pointers */
-	    qPtrs = IX_QMGR_INLINE_READ_LONG(infoPtr->qConfigRegAddr);
-
-	    /* Mod subtraction of pointers to get number of words in Q. */
-	    qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; 
-  
-	    if (qPtrs == 0)
-	    {
-		/* no entry in the queue */
-		infoPtr->qReadCount = 0;
-	    }
-	    else
-	    {
-		/* convert the number of words inside the queue
-		 * to a number of entries 
-		 */
-		infoPtr->qReadCount = qPtrs & (infoPtr->qSizeInEntries - 1);
-	    }
-	    return IX_SUCCESS;
-	}
-    }
-    *entryPtr = entry;
-    return IX_SUCCESS;
-}
-#endif
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQBurstRead (IxQMgrQId qId,
-		  UINT32 numEntries,
-		  UINT32 *entries)
- *
- * @brief Read a number of entries from an AQM queue.
- *
- * This function will burst read a number of entries from the specified queue.
- * The entry size of queue is auto-detected. The function will attempt to
- * read as many entries as specified by the numEntries parameter and will
- * return an UNDERFLOW if any one of the individual entry reads fail.
- *
- * @warning
- * IX_QMGR_Q_UNDERFLOW is only returned for queues 0-31 as queues 32-63
- * do not have an underflow status maintained, hence there is a potential for
- * silent failure here. This function must be used with caution.
- *
- * @note
- * This function is intended for fast draining of queues, so to make it
- * as efficient as possible, it has the following features:
- * - This function is inlined, to reduce unnecessary function call overhead.
- * - It does not perform any parameter checks, or update any statistics.
- * - It does not check that the queue specified by qId has been configured.
- * - It does not check that the queue has the number of full entries that
- * have been specified to be read. It will read until it finds a NULL entry or
- * until the number of specified entries have been read.  It always checks for
- * underflow after all the reads have been performed.
- * Therefore, the client should ensure before calling this function that there
- * are enough entries in the queue to read.  ixQMgrQNumEntriesGet() will
- * provide the number of full entries in a queue.
- * ixQMgrQRead() or ixQMgrQReadWithChecks(), which only reads
- * a single queue entry per call, should be used instead if the user requires
- * checks for UNDERFLOW after each entry read.
- *
- * @param qId @ref IxQMgrQId [in]   - the queue identifier.
- * @param numEntries unsigned [in] - the number of entries to read. 
- *                     This number should be greater than 0
- * @param *entries UINT32 [out] - the word(s) read.
- *
- * @return @li IX_SUCCESS, entries were successfully read.
- * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue 
- *
- */
-#ifdef NO_INLINE_APIS  
-PUBLIC IX_STATUS
-ixQMgrQBurstRead (IxQMgrQId qId,
-                  UINT32 numEntries,
-                  UINT32 *entries);
-#else
-IX_QMGR_INLINE PUBLIC IX_STATUS
-ixQMgrQBurstRead (IxQMgrQId qId,
-                  UINT32 numEntries,
-                  UINT32 *entries);
-#endif  /* endif NO_INLINE_APIS */
-
-IX_QMGR_INLINE PUBLIC IX_STATUS
-ixQMgrQBurstRead (IxQMgrQId qId,
-		  UINT32 numEntries,
-		  UINT32 *entries)
-#ifdef NO_INLINE_APIS
-;
-#else
-{
-    IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    UINT32 nullCheckEntry;
-
-    if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1)
-    {
-	volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr;
-
-	/* the code is optimized to take care of data dependencies:
-	 * Durig a read, there are a few cycles needed to get the 
-	 * read complete. During these cycles, it is poossible to
-	 * do some CPU, e.g. increment pointers and decrement 
-	 * counters.
-	 */
-
-	/* fetch a queue entry */
-	nullCheckEntry = IX_QMGR_INLINE_READ_LONG(infoPtr->qAccRegAddr);
-
-	/* iterate the specified number of queue entries */ 
-	while (--numEntries)
-	{
-	    /* check the result of the previous read */
-	    if (nullCheckEntry == 0)
-	    {
-		/* if we read a NULL entry, stop. We have underflowed */
-		break;
-	    }
-	    else
-	    {
-		/* write the entry */
-		*entries = nullCheckEntry;
-		/* fetch next entry */
-		nullCheckEntry = IX_QMGR_INLINE_READ_LONG(qAccRegAddr);
-		/* increment the write address */
-		entries++;
-	    }
-	}
-	/* write the pre-fetched entry */
-	*entries = nullCheckEntry;
-    }
-    else
-    {
-	IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords;
-	/* read the specified number of queue entries */
-	nullCheckEntry = 0;
-	while (numEntries--)
-	{
-	    UINT32 i;
-
-	    for (i = 0; i < (UINT32)entrySizeInWords; i++)
-	    {
-		*entries = IX_QMGR_INLINE_READ_LONG(infoPtr->qAccRegAddr + i);
-		nullCheckEntry |= *entries++;
-	    }
-
-	    /* if we read a NULL entry, stop. We have underflowed */
-	    if (nullCheckEntry == 0)
-	    {
-		break;
-	    }
-	    nullCheckEntry = 0;
-	}
-    }
-
-    /* reset the current read count : next access to the read function 
-     * will force a underflow status check 
-     */
-    infoPtr->qReadCount = 0;
-
-    /* Check if underflow occurred on the read */
-    if (nullCheckEntry == 0 && qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-	/* get the queue status */
-	UINT32 status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr);
-
-	if (status & infoPtr->qUflowStatBitMask)
-	{
-	    /* clear the underflow status bit if it was set */
-	    IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr,
-				 status & ~infoPtr->qUflowStatBitMask);
-	    return IX_QMGR_Q_UNDERFLOW;
-	}
-    }
-
-    return IX_SUCCESS;
-}
-#endif
-
-/**
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQPeek (IxQMgrQId qId,
-	     unsigned int entryIndex,
-	     UINT32 *entry)
- *
- * @brief Read an entry from a queue without moving the read pointer.
- *
- * This function inspects an entry in a queue. The entry is inspected directly
- * in AQM SRAM and is not read from queue access registers. The entry is NOT removed
- * from the queue and the read/write pointers are unchanged.
- * N.B: The queue should not be accessed when this function is called.
- *
- * @param  qId @ref IxQMgrQId [in]   - the queue identifier.
- * @param  entryIndex unsigned int [in] - index of entry in queue in the range
- *                          [0].......[current number of entries in queue].
- * @param  *entry UINT32 [out] - pointer to the entry word(s).
- *
- * @return @li IX_SUCCESS, entry was successfully inspected.
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s).
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId.
- * @return @li IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS, an entry does not exist at
- *             specified index.
- * @return @li IX_FAIL, failed to inpected the queue entry.
- */
-PUBLIC IX_STATUS
-ixQMgrQPeek (IxQMgrQId qId,
-	     unsigned int entryIndex,
-	     UINT32 *entry);
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQWriteWithChecks (IxQMgrQId qId,
-                        UINT32 *entry)
- *
- * @brief Write an entry to an AQM queue.
- *
- * This function will write the entry size number of words pointed to by entry to
- * the queue specified by qId. The queue configuration word is read to
- * determine the entry size of queue and the corresponding number of words is
- * then written to the queue.
- *
- * @note - IX_QMGR_Q_OVERFLOW is only returned for queues 0-31 as queues 32-63
- * do not have an overflow status maintained.
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier.
- * @param *entry UINT32 [in] - the word(s) to write.
- *
- * @return @li IX_SUCCESS, value was successfully written.
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s).
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId
- * @return @li IX_QMGR_Q_OVERFLOW, attempt to write to a full queue
- *
- */
-PUBLIC IX_STATUS
-ixQMgrQWriteWithChecks (IxQMgrQId qId,
-                        UINT32 *entry);
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQWrite (IxQMgrQId qId,
-	      UINT32 *entry)
- *
- * @brief Fast write of an entry to a queue.
- *
- * This function is a heavily streamlined version of ixQMgrQWriteWithChecks(),
- * but performs essentially the same task.  It will write the entry size number
- * of words pointed to by entry to the queue specified by qId.
- *
- * @note - This function is inlined, to reduce unnecessary function call
- * overhead.  It does not perform any parameter checks, or update any
- * statistics. Also, it does not check that the queue specified by qId has
- * been configured. It simply writes an entry to the queue, and checks for
- * overflow.
- *
- * @note - IX_QMGR_Q_OVERFLOW is only returned for queues 0-31 as queues 32-63
- * do not have an overflow status maintained.
- *
- * @param  qId @ref IxQMgrQId [in]   - the queue identifier.
- * @param  *entry UINT32 [in] - pointer to the entry word(s).
- *
- * @return @li IX_SUCCESS, entry was successfully read.
- * @return @li IX_QMGR_Q_OVERFLOW, attempt to write to a full queue
- *
- */
-#ifdef NO_INLINE_APIS
-PUBLIC IX_STATUS
-ixQMgrQWrite (IxQMgrQId qId,
-	      UINT32 *entry);
-#else
-IX_QMGR_INLINE PUBLIC IX_STATUS
-ixQMgrQWrite (IxQMgrQId qId,
-	      UINT32 *entry);
-#endif /* NO_INLINE_APIS */
-
-IX_QMGR_INLINE PUBLIC IX_STATUS
-ixQMgrQWrite (IxQMgrQId qId,
-	      UINT32 *entry)
-#ifdef NO_INLINE_APIS
-    ;
-#else
-{
-    IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    UINT32 entrySize;
-
-    /* write the entry */
-    IX_QMGR_INLINE_WRITE_LONG(infoPtr->qAccRegAddr, *entry);
-    entrySize = infoPtr->qEntrySizeInWords;
-
-    if (entrySize != IX_QMGR_Q_ENTRY_SIZE1)
-    {	
-	/* process the remaining part of the entry */
-	volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr;
-	while (--entrySize)
-	{
-	    ++entry;
-	    IX_QMGR_INLINE_WRITE_LONG(++qAccRegAddr, *entry);
-	}
-	entrySize = infoPtr->qEntrySizeInWords;
-    }
-
-    /* overflow is available for lower queues only */
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {   
-	UINT32 qSize = infoPtr->qSizeInEntries;
-	/* increment the current number of entries in the queue
-	 * and check for overflow 
-	 */
-	if (infoPtr->qWriteCount++ == qSize)
-	{
-	    /* the queue may have overflow */
-	    UINT32 qPtrs; /* queue internal pointers */
-  
-	    /* get the queue status */
-	    UINT32 status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr);
-
-	    /* read the status twice because the status may 
-	     * not be immediately ready after the write operation
-	     */
-	    if ((status & infoPtr->qOflowStatBitMask) ||
-		((status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr))
-		 & infoPtr->qOflowStatBitMask))
-	    {
-		/* the queue is full, clear the overflow status
-		 *  bit if it was set 
-		 */
-		IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr,
-				     status & ~infoPtr->qOflowStatBitMask);
-		infoPtr->qWriteCount = infoPtr->qSizeInEntries;
-		return IX_QMGR_Q_OVERFLOW;
-	    }
-	    /* No overflow occured : someone is draining the queue
-	     * and the current counter needs to be
-	     * updated from the current number of entries in the queue
-	     */
-
-	    /* get q pointer snapshot */
-	    qPtrs = IX_QMGR_INLINE_READ_LONG(infoPtr->qConfigRegAddr);
-
-	    /* Mod subtraction of pointers to get number of words in Q. */
-	    qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; 
-
-	    if (qPtrs == 0)
-	    {
-		/* the queue may be full at the time of the 
-		 * snapshot. Next access will check 
-		 * the overflow status again.
-		 */
-		infoPtr->qWriteCount = qSize;
-	    }
-	    else 
-	    {
-		/* convert the number of words to a number of entries */
-		if (entrySize == IX_QMGR_Q_ENTRY_SIZE1)
-		{
-		    infoPtr->qWriteCount = qPtrs & (qSize - 1);
-		}
-		else
-		{
-		    infoPtr->qWriteCount = (qPtrs / entrySize) & (qSize - 1);
-		}
-	    }
-	}
-    }
-    return IX_SUCCESS;
-}
-#endif
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQBurstWrite (IxQMgrQId qId,
-		   unsigned numEntries,
-		   UINT32 *entries)
- *
- * @brief Write a number of entries to an AQM queue.
- *
- * This function will burst write a number of entries to the specified queue.
- * The entry size of queue is auto-detected. The function will attempt to
- * write as many entries as specified by the numEntries parameter and will
- * return an OVERFLOW if any one of the individual entry writes fail.
- *
- * @warning
- * IX_QMGR_Q_OVERFLOW is only returned for queues 0-31 as queues 32-63
- * do not have an overflow status maintained, hence there is a potential for
- * silent failure here. This function must be used with caution.
- *
- * @note
- * This function is intended for fast population of queues, so to make it
- * as efficient as possible, it has the following features:
- * - This function is inlined, to reduce unnecessary function call overhead.
- * - It does not perform any parameter checks, or update any statistics.
- * - It does not check that the queue specified by qId has been configured.
- * - It does not check that the queue has enough free space to hold the entries
- * before writing, and only checks for overflow after all writes have been
- * performed.  Therefore, the client should ensure before calling this function
- * that there is enough free space in the queue to hold the number of entries
- * to be written.  ixQMgrQWrite() or ixQMgrQWriteWithChecks(), which only writes
- * a single queue entry per call, should be used instead if the user requires
- * checks for OVERFLOW after each entry written.
- *
- * @param qId @ref IxQMgrQId [in]   - the queue identifier.
- * @param numEntries unsigned [in] - the number of entries to write.
- * @param *entries UINT32 [in]  - the word(s) to write.
- *
- * @return @li IX_SUCCESS, value was successfully written.
- * @return @li IX_QMGR_Q_OVERFLOW, attempt to write to a full queue
- *
- */
-#ifdef NO_INLINE_APIS
-PUBLIC IX_STATUS
-ixQMgrQBurstWrite (IxQMgrQId qId,
-		   unsigned numEntries,
-		   UINT32 *entries);
-#else
-IX_QMGR_INLINE PUBLIC IX_STATUS
-ixQMgrQBurstWrite (IxQMgrQId qId,
-		   unsigned numEntries,
-		   UINT32 *entries);
-#endif /* NO_INLINE_APIS */
-
-IX_QMGR_INLINE PUBLIC IX_STATUS
-ixQMgrQBurstWrite (IxQMgrQId qId,
-		   unsigned numEntries,
-		   UINT32 *entries)
-#ifdef NO_INLINE_APIS
-;
-#else
-{
-    IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId];
-    UINT32 status;
-
-    /* update the current write count */
-    infoPtr->qWriteCount += numEntries;
-
-    if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1)
-    {
-	volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr;
-	while (numEntries--)
-	{
-	    IX_QMGR_INLINE_WRITE_LONG(qAccRegAddr, *entries);
-	    entries++;
-	}
-    }
-    else
-    {
-	IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords;
-	UINT32 i;
-
-	/* write each queue entry */
-	while (numEntries--)
-	{
-	    /* write the queueEntrySize number of words for each entry */
-	    for (i = 0; i < (UINT32)entrySizeInWords; i++)
-	    {
-		IX_QMGR_INLINE_WRITE_LONG((infoPtr->qAccRegAddr + i), *entries);
-		entries++;
-	    }
-	}
-    }
-
-    /* check if the write count overflows */
-    if (infoPtr->qWriteCount > infoPtr->qSizeInEntries)
-    {
-	/* reset the current write count */
-	infoPtr->qWriteCount = infoPtr->qSizeInEntries;
-    }
-
-    /* Check if overflow occurred on the write operation */
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-	/* get the queue status */
-	status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr);
-
-	/* read the status twice because the status may 
-	 * not be ready at the time of the write
-	 */
-	if ((status & infoPtr->qOflowStatBitMask) ||
-	    ((status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr))
-	     & infoPtr->qOflowStatBitMask))
-	{
-	    /* clear the underflow status bit if it was set */
-	    IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr,
-				 status & ~infoPtr->qOflowStatBitMask);
-	    return IX_QMGR_Q_OVERFLOW;
-	}
-    }
-
-    return IX_SUCCESS;
-}
-#endif
-
-/**
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQPoke (IxQMgrQId qId,
-	     unsigned int entryIndex,
-	     UINT32 *entry)
- *
- * @brief Write an entry to a queue without moving the write pointer.
- *
- * This function modifies an entry in a queue. The entry is modified directly
- * in AQM SRAM and not using the queue access registers. The entry is NOT added to the
- * queue and the read/write pointers are unchanged.
- * N.B: The queue should not be accessed when this function is called.
- *
- * @param qId @ref IxQMgrQId [in]  - the queue identifier.
- * @param  entryIndex unsigned int [in] - index of entry in queue in the range
- *                          [0].......[current number of entries in queue].
- * @param  *entry UINT32 [in] - pointer to the entry word(s).
- *
- * @return @li IX_SUCCESS, entry was successfully modified.
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s).
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId.
- * @return @li IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS, an entry does not exist at
- *             specified index.
- * @return @li IX_FAIL, failed to modify the queue entry.
- */
-PUBLIC IX_STATUS
-ixQMgrQPoke (IxQMgrQId qId,
-	     unsigned int entryIndex,
-	     UINT32 *entry);
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQNumEntriesGet (IxQMgrQId qId,
-		      unsigned *numEntries)
- *
- * @brief Get a snapshot of the number of entries in a queue.
- *
- * This function gets the number of entries in a queue.
- *
- * @param qId @ref IxQMgrQId [in] qId - the queue idenfifier
- * @param *numEntries unsigned [out] - the number of entries in a queue
- *
- * @return @li IX_SUCCESS, got the number of entries for the queue
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s).
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured
- * @return @li IX_QMGR_WARNING, could not determine num entries at this time
- *
- */
-PUBLIC IX_STATUS
-ixQMgrQNumEntriesGet (IxQMgrQId qId,
-		      unsigned *numEntries);
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrQStatusGetWithChecks (IxQMgrQId qId,
-                            IxQMgrQStatus *qStatus)
- *
- * @brief Get a queues status.
- *
- * This function reads the specified queues status. A queues status is defined
- * by its status flags. For queues 0-31 these flags are E,NE,NF,F. For
- * queues 32-63 these flags are NE and F.
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier.
- * @param &qStatus @ref IxQMgrQStatus [out] - the status of the specified queue.
- *
- * @return @li IX_SUCCESS, queue status was successfully read.
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter.
- *
- */
-PUBLIC IX_STATUS
-ixQMgrQStatusGetWithChecks (IxQMgrQId qId,
-                            IxQMgrQStatus *qStatus);
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrQStatusGet (IxQMgrQId qId,
-		  IxQMgrQStatus *qStatus)
- *
- * @brief Fast get of a queue's status.
- *
- * This function is a streamlined version of ixQMgrQStatusGetWithChecks(), but
- * performs essentially the same task.  It reads the specified queue's status.
- * A queues status is defined by its status flags. For queues 0-31 these flags
- * are E,NE,NF,F. For queues 32-63 these flags are NE and F.
- *
- * @note - This function is inlined, to reduce unnecessary function call
- * overhead.  It does not perform any parameter checks, or update any
- * statistics.  Also, it does not check that the queue specified by qId has
- * been configured.  It simply reads the specified queue's status.
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier.
- * @param *qStatus @ref IxQMgrQStatus [out] - the status of the specified queue.
- *
- * @return @li void.
- *
- */
-
-#ifdef NO_INLINE_APIS
-PUBLIC IX_STATUS
-ixQMgrQStatusGet (IxQMgrQId qId,
-		  IxQMgrQStatus *qStatus);
-#else  
-extern UINT32 ixQMgrAqmIfQueLowStatRegAddr[];
-extern UINT32 ixQMgrAqmIfQueLowStatBitsOffset[];
-extern UINT32 ixQMgrAqmIfQueLowStatBitsMask;
-extern UINT32 ixQMgrAqmIfQueUppStat0RegAddr;
-extern UINT32 ixQMgrAqmIfQueUppStat1RegAddr;
-extern UINT32 ixQMgrAqmIfQueUppStat0BitMask[];
-extern UINT32 ixQMgrAqmIfQueUppStat1BitMask[];
-
-IX_QMGR_INLINE PUBLIC IX_STATUS
-ixQMgrQStatusGet (IxQMgrQId qId,
-		  IxQMgrQStatus *qStatus);
-#endif  /* endif NO_INLINE_APIS */
-
-IX_QMGR_INLINE PUBLIC IX_STATUS
-ixQMgrQStatusGet (IxQMgrQId qId,
-		  IxQMgrQStatus *qStatus)
-#ifdef NO_INLINE_APIS
-    ;
-#else
-{
-    /* read the status of a queue in the range 0-31 */
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-	volatile UINT32 *lowStatRegAddr = (UINT32*)ixQMgrAqmIfQueLowStatRegAddr[qId];
-
-	UINT32 lowStatBitsOffset = ixQMgrAqmIfQueLowStatBitsOffset[qId];
-	UINT32 lowStatBitsMask   = ixQMgrAqmIfQueLowStatBitsMask;
-
-	/* read the status register for this queue */
-	*qStatus = IX_QMGR_INLINE_READ_LONG(lowStatRegAddr);
-
-	/* mask out the status bits relevant only to this queue */
-	*qStatus = (*qStatus >> lowStatBitsOffset) & lowStatBitsMask;
-
-    }
-    else /* read status of a queue in the range 32-63 */
-    {
-
-	volatile UINT32 *qNearEmptyStatRegAddr = (UINT32*)ixQMgrAqmIfQueUppStat0RegAddr;
-	volatile UINT32 *qFullStatRegAddr      = (UINT32*)ixQMgrAqmIfQueUppStat1RegAddr;
-	int maskIndex = qId - IX_QMGR_MIN_QUEUPP_QID;
-	UINT32 qNearEmptyStatBitMask = ixQMgrAqmIfQueUppStat0BitMask[maskIndex];
-	UINT32 qFullStatBitMask      = ixQMgrAqmIfQueUppStat1BitMask[maskIndex];
-
-	/* Reset the status bits */
-	*qStatus = 0;
-
-	/* Check if the queue is nearly empty */
-	if (IX_QMGR_INLINE_READ_LONG(qNearEmptyStatRegAddr) & qNearEmptyStatBitMask)
-	{
-	    *qStatus |= IX_QMGR_Q_STATUS_NE_BIT_MASK;
-	}
-
-	/* Check if the queue is full */
-	if (IX_QMGR_INLINE_READ_LONG(qFullStatRegAddr) & qFullStatBitMask)
-	{
-	    *qStatus |= IX_QMGR_Q_STATUS_F_BIT_MASK;
-	}
-    }
-    return IX_SUCCESS;
-}
-#endif
-
-/* ------------------------------------------------------------
-   Queue dispatch related functions
-   ---------------------------------------------------------- */
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrDispatcherPrioritySet (IxQMgrQId qId,
-			     IxQMgrPriority priority)
- *
- * @brief Set the dispatch priority of a queue.
- *
- * This function is called to set the dispatch priority of queue. The effect of
- * this function is to add a priority change request to a queue. This queue is
- * serviced by @a ixQMgrDispatcherLoopRunA0, @a ixQMgrDispatcherLoopRunB0 or 
- * @a ixQMgrDispatcherLoopRunB0LLP.
- *
- * This function is re-entrant. and can be used from an interrupt context
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier
- * @param priority @ref IxQMgrPriority [in] - the new queue dispatch priority
- *
- * @return @li IX_SUCCESS, priority change request is queued
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured
- * @return @li IX_QMGR_Q_INVALID_PRIORITY, specified priority is invalid
- *
- */
-PUBLIC IX_STATUS
-ixQMgrDispatcherPrioritySet (IxQMgrQId qId,
-			     IxQMgrPriority priority);
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrNotificationEnable (IxQMgrQId qId,
-			  IxQMgrSourceId sourceId)
- *
- * @brief Enable notification on a queue for a specified queue source flag.
- *
- * This function is called by a client of the QMgr to enable notifications on a
- * specified condition.
- * If the condition for the notification is set after the client has called this
- * function but before the function has enabled the interrupt source, then the
- * notification will not occur.
- * For queues 32-63 the notification source is fixed to the NE(Nearly Empty) flag
- * and cannot be changed so the sourceId parameter is ignored for these queues.
- * The status register is read before the notofication is enabled and is read again
- * after the notification has been enabled, if they differ then the warning status
- * is returned.
- *
- * This function is re-entrant. and can be used from an interrupt context
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier
- * @param sourceId @ref IxQMgrSourceId [in] - the interrupt src condition identifier
- *
- * @return @li IX_SUCCESS, the interrupt has been enabled for the specified source
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured
- * @return @li IX_QMGR_INVALID_INT_SOURCE_ID, interrupt source invalid for this queue
- * @return @li IX_QMGR_WARNING, the status register may not be constistent
- *
- */
-PUBLIC IX_STATUS
-ixQMgrNotificationEnable (IxQMgrQId qId,
-			  IxQMgrSourceId sourceId);
-
-/**
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrNotificationDisable (IxQMgrQId qId)
- *
- * @brief Disable notifications on a queue.
- *
- * This function is called to disable notifications on a specified queue.
- *
- * This function is re-entrant. and can be used from an interrupt context
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier
- *
- * @return @li IX_SUCCESS, the interrupt has been disabled
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured
- *
- */
-PUBLIC IX_STATUS
-ixQMgrNotificationDisable (IxQMgrQId qId);
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group)
- *
- * @brief Run the callback dispatcher.
- *
- * This function runs the dispatcher for a group of queues.
- * Callbacks are made for interrupts that have occurred on queues within
- * the group that have registered callbacks. The order in which queues are
- * serviced depends on the queue priorities set by the client.
- * This function may be called from interrupt or task context.
- * For optimisations that were introduced in IXP42X B0 and supported IXP46X
- * the @a ixQMgrDispatcherLoopRunB0, or @a ixQMgrDispatcherLoopRunB0LLP 
- * should be used.
- *
- * This function is not re-entrant.
- *
- * @param group @ref IxQMgrDispatchGroup [in] - the group of queues over which the
- *                                        dispatcher will run
- *
- * @return @li void
- *
- * @note This function may be called from interrupt or task context.
- * However, for optimal performance the choice of context depends also on the
- * operating system used.
- *
- */
-PUBLIC void
-ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group);
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group)
- *
- * @brief Run the callback dispatcher.
- *
- * The enhanced version of @a ixQMgrDispatcherLoopRunA0 that is optimised for
- * features introduced in IXP42X B0 silicon and supported on IXP46X. 
- * This is the default dispatcher for IXP42X B0 and IXP46X silicon. 
- * The function runs the dispatcher for a group of queues.
- * Callbacks are made for interrupts that have occurred on queues within
- * the group that have registered callbacks. The order in which queues are
- * serviced depends on the queue priorities set by the client.
- * This  function may be called from interrupt or task context.
- *
- * This function is not re-entrant.
- *
- * @param group @ref IxQMgrDispatchGroup [in] - the group of queues over which the
- *                                        dispatcher will run
- *
- * @return @li void
- *
- *
- * @note This function may be called from interrupt or task context.
- * However, for optimal performance the choice of context depends also on the
- * operating system used.
- *
- */
-PUBLIC void
-ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group);
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group)
- *
- * @brief Run the callback dispatcher.
- *
- * This is a version of the optimised dispatcher for IXP42X B0 and IXP46X, 
- * @a ixQMgrDispatcherLoopRunB0, with added support for livelock prevention. 
- * This dispatcher will only be used for the IXP42X B0 or IXP46X silicon if 
- * feature control indicates that IX_FEATURECTRL_ORIGB0_DISPATCHER is set to   
- * IX_FEATURE_CTRL_SWCONFIG_DISABLED. Otherwise the @a ixQMgrDispatcherLoopRunB0 
- * dispatcher will be used (Default). 
- *
- * When this dispatcher notifies for a queue that is type
- * IX_QMGR_TYPE_REALTIME_PERIODIC, notifications for queues that are set
- * as type IX_QMGR_REALTIME_SPORADIC are not processed and disabled.
- * This helps prevent any tasks resulting from the notification of the 
- * IX_QMGR_TYPE_REALTIME_PERIODIC type queue to being subject to livelock.
- * The function runs the dispatcher for a group of queues.
- * Callbacks are made for interrupts that have occurred on queues within
- * the group that have registered callbacks. The order in which queues are
- * serviced depends on their type along with the  queue priorities set by the 
- * client. This function may be called from interrupt or task context.
- *
- * This function is not re-entrant.
- *
- * @param group @ref IxQMgrDispatchGroup [in] - the group of queues over which 
- *                                        the dispatcher will run
- *
- * @return @li void
- *
- * @note This function may be called from interrupt or task context.
- * However, for optimal performance the choice of context depends also on the
- * operating system used.
- *
- */
-PUBLIC void
-ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group);
-
-/**
- *
- * @ingroup IxQMgrAPI
- * 
- * @fn ixQMgrNotificationCallbackSet (IxQMgrQId qId,
-			       IxQMgrCallback callback,
-			       IxQMgrCallbackId callbackId)
- *
- * @brief Set the notification callback for a queue.
- *
- * This function sets the callback for the specified queue. This callback will
- * be called by the dispatcher, and may be called in the context of a interrupt
- * If callback has a value of NULL the previously registered callback, if one
- * exists will be unregistered.
- *
- * @param qId @ref IxQMgrQId [in] - the queue idenfifier
- * @param callback @ref IxQMgrCallback  [in] - the callback registered for this queue
- * @param callbackId @ref IxQMgrCallbackId [in] - the callback identifier
- *
- * @return @li IX_SUCCESS, the callback for the specified queue has been set
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured
- *
- */
-PUBLIC IX_STATUS
-ixQMgrNotificationCallbackSet (IxQMgrQId qId,
-			       IxQMgrCallback callback,
-			       IxQMgrCallbackId callbackId);
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr)
- *
- * @brief Get QMgr DispatcherLoopRun for respective silicon device
- *
- * This function gets a function pointer to ixQMgrDispatcherLoopRunA0() for IXP42X A0
- * Silicon. If the IXP42X B0 or 46X Silicon, the default is the ixQMgrDispatcherLoopRunB0()
- * function, however if live lock prevention is enabled a function pointer to
- * ixQMgrDispatcherLoopRunB0LLP() is given.
- *
- * @param *qDispatchFuncPtr @ref IxQMgrDispatcherFuncPtr [out]  - 
- *              the function pointer of QMgr Dispatcher
- *
- */
-PUBLIC void
-ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr);
-
-/**
- *
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrStickyInterruptRegEnable(void)
- *
- * @brief Enable AQM's sticky interrupt register behaviour only available
- *        on B0 Silicon. 
- * 
- * When AQM's sticky interrupt register is enabled, interrupt register bit will
- * only be cleared when a '1' is written to interrupt register bit and the
- * interrupting condition is satisfied, i.e.queue condition does not exist.
- * 
- * @note This function must be called before any queue is enabled.
- *       Calling this function after queue is enabled will cause
- *       undefined results. 
- *
- * @return none
- *
- */
-PUBLIC void
-ixQMgrStickyInterruptRegEnable(void);
-
-
-/**
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrCallbackTypeSet(IxQMgrQId qId,
-                             IxQMgrType type)
- *
- * @brief Set the Callback Type of a queue.
- *
- * This function is only used for live lock prevention.
- * This function allows the callback type of a queue to be set. The default for
- * all queues is IX_QMGR_TYPE_REALTIME_OTHER. Setting the type to
- * IX_QMGR_TYPE_REALTIME_SPORADIC means that this queue will have it's 
- * notifications disabled while there is a task associated with a 
- * queue of type IX_QMGR_TYPE_REALTIME_PERIODIC running. As live lock
- * prevention operates on lower queues, this function should
- * be called for lower queues only.
- * This function is not re-entrant.  
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier
- * @param type @ref IxQMgrType [in] - the type of callback
- *
- * @return @li IX_SUCCESS, successfully set callback type for the queue entry
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s).
- *
- */
-PUBLIC IX_STATUS
-ixQMgrCallbackTypeSet(IxQMgrQId qId,
-                      IxQMgrType type);
-
-/**
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrCallbackTypeGet(IxQMgrQId qId,
-                             IxQMgrType *type)
- *
- * @brief Get the Callback Type of a queue.
- *
- * This function allows the callback type of a queue to be got. As live lock
- * prevention operates on lower queues, this function should
- * be called for lower queues only.
- * This function is re-entrant.
- *
- * @param qId @ref IxQMgrQId [in] - the queue identifier
- * @param *type @ref IxQMgrType [out] - the type of callback
- *
- * @return @li IX_SUCCESS, successfully set callback type for the queue entry
- * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId
- * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s)
- *
- */
-PUBLIC IX_STATUS
-ixQMgrCallbackTypeGet(IxQMgrQId qId,
-                      IxQMgrType *type);
-
-/**
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrPeriodicDone(void)
- *
- * @brief Indicate that the Periodic task is completed for LLP
- *
- * This function is used as part of live lock prevention. 
- * A periodic task is a task that results from a queue that 
- * is set as type IX_QMGR_TYPE_REALTIME_PERIODIC. This function 
- * should be called to indicate to the dispatcher that the
- * the periodic task is completed. This ensures that the notifications
- * for queues set as type sporadic queues are re-enabled.
- * This function is re-entrant.
- *
- */
-PUBLIC void
-ixQMgrPeriodicDone(void);
-
-
-/**
- * @ingroup IxQMgrAPI
- *
- * @fn ixQMgrLLPShow(int resetStats)
- *
- * @brief Print out the live lock prevention statistics when in debug mode.
- *
- * This function prints out statistics related to the livelock. These
- * statistics are only collected in debug mode.
- * This function is not re-entrant.
- *
- * @param resetStats @ref int [in] - if set the the stats are reset.
- *
- */
-PUBLIC void
-ixQMgrLLPShow(int resetStats);
-
-
-#endif /* IXQMGR_H */
-
-/**
- * @} defgroup IxQMgrAPI
- */
-
-
diff --git a/drivers/net/npe/include/IxQMgrAqmIf_p.h b/drivers/net/npe/include/IxQMgrAqmIf_p.h
deleted file mode 100644
index 1b9cfd2..0000000
--- a/drivers/net/npe/include/IxQMgrAqmIf_p.h
+++ /dev/null
@@ -1,903 +0,0 @@
-/**
- * @file    IxQMgrAqmIf_p.h
- *
- * @author Intel Corporation
- * @date    30-Oct-2001
- *
- * @brief   The IxQMgrAqmIf sub-component provides a number of inline
- * functions for performing I/O on the AQM. 
- *
- * Because  some functions contained in this module are inline and are
- * used in other modules (within the QMgr component) the definitions are
- * contained in this header file. The "normal" use of inline functions
- * is to use the inline functions in the module in which they are
- * defined. In this case these inline functions are used in external
- * modules and therefore the use of "inline extern". What this means
- * is as follows: if a function foo is declared as "inline extern"this
- * definition is only used for inlining, in no case is the function
- * compiled on its own. If the compiler cannot inline the function it
- * becomes an external reference. Therefore in IxQMgrAqmIf.c all
- * inline functions are defined without the "inline extern" specifier
- * and so define the external references. In all other modules these
- * funtions are defined as "inline extern".
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-#ifndef IXQMGRAQMIF_P_H
-#define IXQMGRAQMIF_P_H
-
-#include "IxOsalTypes.h"
-
-/*
- * inline definition
- */
- 
-#ifdef IX_OSAL_INLINE_ALL
-/* If IX_OSAL_INLINE_ALL is set then each inlineable API functions will be defined as
-   inline functions */
-#define IX_QMGR_AQMIF_INLINE IX_OSAL_INLINE_EXTERN
-#else   
-#ifdef IXQMGRAQMIF_C
-#ifndef IX_QMGR_AQMIF_INLINE
-#define IX_QMGR_AQMIF_INLINE
-#endif
-#else  
-#ifndef IX_QMGR_AQMIF_INLINE
-#define IX_QMGR_AQMIF_INLINE IX_OSAL_INLINE_EXTERN
-#endif
-#endif /* IXQMGRAQMIF_C */
-#endif /* IX_OSAL_INLINE */
-
-
-/*
- * User defined include files.
- */
-#include "IxQMgr.h"
-#include "IxQMgrLog_p.h"
-#include "IxQMgrQCfg_p.h"
-
-/* Because this file contains inline functions which will be compiled into
- * other components, we need to ensure that the IX_COMPONENT_NAME define
- * is set to ix_qmgr while this code is being compiled.  This will ensure
- * that the correct implementation is provided for the memory access macros
- * IX_OSAL_READ_LONG and IX_OSAL_WRITE_LONG which are used in this file.
- * This must be done before including "IxOsalMemAccess.h"
- */
-#define IX_QMGR_AQMIF_SAVED_COMPONENT_NAME IX_COMPONENT_NAME
-#undef  IX_COMPONENT_NAME
-#define IX_COMPONENT_NAME ix_qmgr
-#include "IxOsal.h" 
-
-/*
- * #defines and macros used in this file.
- */
-
-/* Number of bytes per word */
-#define IX_QMGR_NUM_BYTES_PER_WORD 4
-
-/* Underflow bit mask  */
-#define IX_QMGR_UNDERFLOW_BIT_OFFSET    0x0
-
-/* Overflow bit mask */
-#define IX_QMGR_OVERFLOW_BIT_OFFSET     0x1
-
-/* Queue access register, queue 0 */
-#define IX_QMGR_QUEACC0_OFFSET      0x0000
-
-/* Size of queue access register in words */
-#define IX_QMGR_QUEACC_SIZE         0x4/*words*/
-
-/* Queue status register, queues 0-7 */
-#define IX_QMGR_QUELOWSTAT0_OFFSET  (IX_QMGR_QUEACC0_OFFSET +\
-(IX_QMGR_MAX_NUM_QUEUES * IX_QMGR_QUEACC_SIZE * IX_QMGR_NUM_BYTES_PER_WORD))
-
-/* Queue status register, queues 8-15 */
-#define IX_QMGR_QUELOWSTAT1_OFFSET  (IX_QMGR_QUELOWSTAT0_OFFSET +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Queue status register, queues 16-23 */
-#define IX_QMGR_QUELOWSTAT2_OFFSET  (IX_QMGR_QUELOWSTAT1_OFFSET +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Queue status register, queues 24-31 */
-#define IX_QMGR_QUELOWSTAT3_OFFSET  (IX_QMGR_QUELOWSTAT2_OFFSET +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Queue status register Q status bits mask */
-#define IX_QMGR_QUELOWSTAT_QUE_STS_BITS_MASK 0xF
-
-/* Size of queue 0-31 status register */
-#define IX_QMGR_QUELOWSTAT_SIZE     0x4 /*words*/
-
-/* The number of queues' status specified per word */
-#define IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD 0x8
-
-/* Queue UF/OF status register queues 0-15  */
-#define IX_QMGR_QUEUOSTAT0_OFFSET   (IX_QMGR_QUELOWSTAT3_OFFSET +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-/* Queue UF/OF status register queues 16-31 */
-#define IX_QMGR_QUEUOSTAT1_OFFSET   (IX_QMGR_QUEUOSTAT0_OFFSET +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* The number of queues' underflow/overflow status specified per word */
-#define IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD 0x10
-
-/* Queue NE status register, queues 32-63   */
-#define IX_QMGR_QUEUPPSTAT0_OFFSET  (IX_QMGR_QUEUOSTAT1_OFFSET +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Queue F status register, queues 32-63    */
-#define IX_QMGR_QUEUPPSTAT1_OFFSET  (IX_QMGR_QUEUPPSTAT0_OFFSET +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Size of queue 32-63 status register */
-#define IX_QMGR_QUEUPPSTAT_SIZE     0x2 /*words*/
-
-/* The number of queues' status specified per word */
-#define IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD 0x20
-
-/* Queue INT source select register, queues 0-7   */
-#define IX_QMGR_INT0SRCSELREG0_OFFSET (IX_QMGR_QUEUPPSTAT1_OFFSET   +\
-                                       IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Queue INT source select register, queues 8-15  */
-#define IX_QMGR_INT0SRCSELREG1_OFFSET (IX_QMGR_INT0SRCSELREG0_OFFSET+\
-                                       IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Queue INT source select register, queues 16-23 */
-#define IX_QMGR_INT0SRCSELREG2_OFFSET (IX_QMGR_INT0SRCSELREG1_OFFSET+\
-                                       IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Queue INT source select register, queues 24-31 */
-#define IX_QMGR_INT0SRCSELREG3_OFFSET (IX_QMGR_INT0SRCSELREG2_OFFSET+\
-                                       IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Size of interrupt source select reegister */
-#define IX_QMGR_INT0SRCSELREG_SIZE  0x4 /*words*/
-
-/* The number of queues' interrupt source select specified per word*/
-#define IX_QMGR_INTSRC_NUM_QUE_PER_WORD 0x8
-
-/* Queue INT enable register, queues 0-31  */
-#define IX_QMGR_QUEIEREG0_OFFSET    (IX_QMGR_INT0SRCSELREG3_OFFSET +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Queue INT enable register, queues 32-63 */
-#define IX_QMGR_QUEIEREG1_OFFSET    (IX_QMGR_QUEIEREG0_OFFSET      +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Queue INT register, queues 0-31  */
-#define IX_QMGR_QINTREG0_OFFSET     (IX_QMGR_QUEIEREG1_OFFSET +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Queue INT register, queues 32-63 */
-#define IX_QMGR_QINTREG1_OFFSET     (IX_QMGR_QINTREG0_OFFSET  +\
-                                     IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Size of interrupt register */
-#define IX_QMGR_QINTREG_SIZE        0x2 /*words*/
-
-/* Number of queues' status specified per word */
-#define IX_QMGR_QINTREG_NUM_QUE_PER_WORD 0x20
-
-/* Number of bits per queue interrupt status */
-#define IX_QMGR_QINTREG_BITS_PER_QUEUE 0x1
-#define IX_QMGR_QINTREG_BIT_OFFSET 0x1
-
-/* Size of address space not used by AQM */
-#define IX_QMGR_AQM_UNUSED_ADDRESS_SPACE_SIZE_IN_BYTES  0x1bC0
-
-/* Queue config register, queue 0 */
-#define IX_QMGR_QUECONFIG_BASE_OFFSET (IX_QMGR_QINTREG1_OFFSET +\
-                             IX_QMGR_NUM_BYTES_PER_WORD +\
-                             IX_QMGR_AQM_UNUSED_ADDRESS_SPACE_SIZE_IN_BYTES)
-
-/* Total size of configuration words */
-#define IX_QMGR_QUECONFIG_SIZE      0x100
-
-/* Start of SRAM queue buffer space */
-#define IX_QMGR_QUEBUFFER_SPACE_OFFSET (IX_QMGR_QUECONFIG_BASE_OFFSET +\
-                                 IX_QMGR_MAX_NUM_QUEUES * IX_QMGR_NUM_BYTES_PER_WORD)
-
-/* Total bits in a word */
-#define BITS_PER_WORD 32
-
-/* Size of queue buffer space */
-#define IX_QMGR_QUE_BUFFER_SPACE_SIZE 0x1F00
-
-/*
- * This macro will return the address of the access register for the
- * queue  specified by qId
- */
-#define IX_QMGR_Q_ACCESS_ADDR_GET(qId)\
-        (((qId) * (IX_QMGR_QUEACC_SIZE * IX_QMGR_NUM_BYTES_PER_WORD))\
-	 + IX_QMGR_QUEACC0_OFFSET)
-
-/* 
- * Bit location of bit-3 of INT0SRCSELREG0 register to enabled
- * sticky interrupt register.
- */
-#define IX_QMGR_INT0SRCSELREG0_BIT3 3
-
-/*
- * Variable declerations global to this file. Externs are followed by
- * statics.
- */
-extern UINT32 aqmBaseAddress;
-
-/*
- * Function declarations.
- */
-void
-ixQMgrAqmIfInit (void);
-
-void
-ixQMgrAqmIfUninit (void);
-
-unsigned
-ixQMgrAqmIfLog2 (unsigned number);
-
-void
-ixQMgrAqmIfQRegisterBitsWrite (IxQMgrQId qId, 
-			       UINT32 registerBaseAddrOffset,
-			       unsigned queuesPerRegWord,
-			       UINT32 value);
-
-void
-ixQMgrAqmIfQStatusCheckValsCalc (IxQMgrQId qId,
-				 IxQMgrSourceId srcSel,
-				 unsigned int *statusWordOffset,
-				 UINT32 *checkValue,
-				 UINT32 *mask);
-/*
- * The Xscale software allways deals with logical addresses and so the
- * base address of the AQM memory space is not a hardcoded value. This
- * function must be called before any other function in this component.
- * NO CHECKING is performed to ensure that the base address has been
- * set.
- */
-void
-ixQMgrAqmIfBaseAddressSet (UINT32 address);
-
-/*
- * Get the base address of the AQM memory space.
- */
-void
-ixQMgrAqmIfBaseAddressGet (UINT32 *address);
-
-/*
- * Get the sram base address
- */
-void
-ixQMgrAqmIfSramBaseAddressGet (UINT32 *address);
-
-/*
- * Read a queue status
- */
-void
-ixQMgrAqmIfQueStatRead (IxQMgrQId qId,
-			IxQMgrQStatus* status);
-
-
-/*
- *   Set INT0SRCSELREG0 Bit3 
- */ 
-void ixQMgrAqmIfIntSrcSelReg0Bit3Set (void);
-
-
-/*
- * Set the interrupt source
- */
-void
-ixQMgrAqmIfIntSrcSelWrite (IxQMgrQId qId,
-			   IxQMgrSourceId sourceId);
-
-/*
- * Enable interruptson a queue
- */
-void
-ixQMgrAqmIfQInterruptEnable (IxQMgrQId qId);
-
-/*
- * Disable interrupt on a quee
- */
-void
-ixQMgrAqmIfQInterruptDisable (IxQMgrQId qId);
-
-/*
- * Write the config register of the specified queue
- */
-void
-ixQMgrAqmIfQueCfgWrite (IxQMgrQId qId,
-			IxQMgrQSizeInWords qSizeInWords,
-			IxQMgrQEntrySizeInWords entrySizeInWords,
-			UINT32 freeSRAMAddress);
-
-/*
- * read fields from the config of the specified queue.
- */
-void
-ixQMgrAqmIfQueCfgRead (IxQMgrQId qId,
-		       unsigned int numEntries,
-		       UINT32 *baseAddress,
-		       unsigned int *ne,
-		       unsigned int *nf,
-		       UINT32 *readPtr,
-		       UINT32 *writePtr);
-
-/*
- * Set the ne and nf watermark level on a queue.
- */
-void
-ixQMgrAqmIfWatermarkSet (IxQMgrQId qId,
-			 unsigned ne,
-			 unsigned nf);
-
-/* Inspect an entry without moving the read pointer */
-IX_STATUS
-ixQMgrAqmIfQPeek (IxQMgrQId qId,
-		  unsigned int entryIndex,
-		  unsigned int *entry);
-
-/* Modify an entry without moving the write pointer */
-IX_STATUS
-ixQMgrAqmIfQPoke (IxQMgrQId qId,
-		  unsigned int entryIndex,
-		  unsigned int *entry);
-
-/*
- * Function prototype for inline functions. For description refers to 
- * the functions defintion below.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfWordWrite (VUINT32 *address,
-		      UINT32 word);
-
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfWordRead (VUINT32 *address,
-		     UINT32 *word);
-
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQPop (IxQMgrQId qId,
-		 IxQMgrQEntrySizeInWords numWords,
-		 UINT32 *entry);
-
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQPush (IxQMgrQId qId,
-		  IxQMgrQEntrySizeInWords numWords,
-		  UINT32 *entry);
-
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQStatusRegsRead (IxQMgrDispatchGroup group, 
-			    UINT32 *qStatusWords);
-
-IX_QMGR_AQMIF_INLINE BOOL
-ixQMgrAqmIfQStatusCheck (UINT32 *oldQStatusWords,
-			 UINT32 *newQStatusWords,
-			 unsigned int statusWordOffset,			 
-			 UINT32 checkValue,
-			 UINT32 mask);
-
-IX_QMGR_AQMIF_INLINE BOOL
-ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId, 
-			     UINT32 registerBaseAddrOffset,
-			     unsigned queuesPerRegWord,
-			     unsigned relativeBitOffset,
-			     BOOL reset);
-
-IX_QMGR_AQMIF_INLINE BOOL
-ixQMgrAqmIfUnderflowCheck (IxQMgrQId qId);
-
-IX_QMGR_AQMIF_INLINE BOOL
-ixQMgrAqmIfOverflowCheck (IxQMgrQId qId);
-
-IX_QMGR_AQMIF_INLINE UINT32
-ixQMgrAqmIfQRegisterBitsRead (IxQMgrQId qId, 
-			      UINT32 registerBaseAddrOffset,
-			      unsigned queuesPerRegWord);
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQInterruptRegWrite (IxQMgrDispatchGroup group, 
-			       UINT32 reg);
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQInterruptRegRead (IxQMgrDispatchGroup group, 
-			      UINT32 *regVal);
-
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQueLowStatRead (IxQMgrQId qId,
-			   IxQMgrQStatus *status);
-
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQueUppStatRead (IxQMgrQId qId,
-			   IxQMgrQStatus *status);
-
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQueStatRead (IxQMgrQId qId, 
-			IxQMgrQStatus *qStatus);
-
-IX_QMGR_AQMIF_INLINE unsigned
-ixQMgrAqmIfPow2NumDivide (unsigned numerator, 
-			  unsigned denominator);
-
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQInterruptEnableRegRead (IxQMgrDispatchGroup group, 
-			            UINT32 *regVal);
-/*
- * Inline functions
- */
-
-/*
- * This inline function is used by other QMgr components to write one
- * word to the specified address.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfWordWrite (VUINT32 *address,
-		      UINT32 word)
-{
-    IX_OSAL_WRITE_LONG(address, word);
-}
-
-/*
- * This inline function is used by other QMgr components to read a
- * word from the specified address.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfWordRead (VUINT32 *address,
-		     UINT32 *word)
-{
-    *word = IX_OSAL_READ_LONG(address);
-}
-
-
-/*
- * This inline function is used by other QMgr components to pop an
- * entry off the specified queue.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQPop (IxQMgrQId qId,
-		 IxQMgrQEntrySizeInWords numWords,
-		 UINT32 *entry)
-{
-    volatile UINT32 *accRegAddr;
-
-    accRegAddr = (UINT32*)(aqmBaseAddress +
-			   IX_QMGR_Q_ACCESS_ADDR_GET(qId));
-
-    switch (numWords)
-    {
-	case IX_QMGR_Q_ENTRY_SIZE1:
-	    ixQMgrAqmIfWordRead (accRegAddr, entry);
-	    break;
-	case IX_QMGR_Q_ENTRY_SIZE2:
-	    ixQMgrAqmIfWordRead (accRegAddr++, entry++);
-	    ixQMgrAqmIfWordRead (accRegAddr, entry);
-	    break;
-	case IX_QMGR_Q_ENTRY_SIZE4:
-	    ixQMgrAqmIfWordRead (accRegAddr++, entry++);
-	    ixQMgrAqmIfWordRead (accRegAddr++, entry++);
-	    ixQMgrAqmIfWordRead (accRegAddr++, entry++);
-	    ixQMgrAqmIfWordRead (accRegAddr, entry);
-	    break;
-	default:
-	    IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfQPop");
-	    break;
-    }
-}
-
-/*
- * This inline function is used by other QMgr components to push an
- * entry to the specified queue.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQPush (IxQMgrQId qId,
-		  IxQMgrQEntrySizeInWords numWords,
-		  UINT32 *entry)
-{
-    volatile UINT32 *accRegAddr;
-
-    accRegAddr = (UINT32*)(aqmBaseAddress +
-			   IX_QMGR_Q_ACCESS_ADDR_GET(qId));
-    
-    switch (numWords)
-    {
-	case IX_QMGR_Q_ENTRY_SIZE1:
-	    ixQMgrAqmIfWordWrite (accRegAddr, *entry);
-	    break;
-	case IX_QMGR_Q_ENTRY_SIZE2:
-	    ixQMgrAqmIfWordWrite (accRegAddr++, *entry++);
-	    ixQMgrAqmIfWordWrite (accRegAddr, *entry);
-	    break;
-	case IX_QMGR_Q_ENTRY_SIZE4:
-	    ixQMgrAqmIfWordWrite (accRegAddr++, *entry++);
-	    ixQMgrAqmIfWordWrite (accRegAddr++, *entry++);
-	    ixQMgrAqmIfWordWrite (accRegAddr++, *entry++);
-	    ixQMgrAqmIfWordWrite (accRegAddr, *entry);
-	    break;
-	default:
-	    IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfQPush");
-	    break;
-    }
-}
-
-/*
- * The AQM interrupt registers contains a bit for each AQM queue
- * specifying the queue (s) that cause an interrupt to fire. This
- * function is called by IxQMGrDispatcher component.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQStatusRegsRead (IxQMgrDispatchGroup group, 
-			    UINT32 *qStatusWords)
-{
-    volatile UINT32 *regAddress = NULL;
-
-    if (group == IX_QMGR_QUELOW_GROUP)
-    {
-	regAddress = (UINT32*)(aqmBaseAddress +
-			       IX_QMGR_QUELOWSTAT0_OFFSET);
-
-	ixQMgrAqmIfWordRead (regAddress++, qStatusWords++);
-	ixQMgrAqmIfWordRead (regAddress++, qStatusWords++);
-	ixQMgrAqmIfWordRead (regAddress++, qStatusWords++);
-	ixQMgrAqmIfWordRead (regAddress, qStatusWords);
-    }
-    else /* We have the upper queues */
-    {
-       /* Only need to read the Nearly Empty status register for
-	* queues 32-63 as for therse queues the interrtupt source
-	* condition is fixed to Nearly Empty
-	*/
-	regAddress = (UINT32*)(aqmBaseAddress +
-			       IX_QMGR_QUEUPPSTAT0_OFFSET);
-	ixQMgrAqmIfWordRead (regAddress, qStatusWords);
-    }
-}
-
-
-/*
- * This function check if the status for a queue has changed between
- * 2 snapshots and if it has, that the status matches a particular
- * value after masking.
- */
-IX_QMGR_AQMIF_INLINE BOOL
-ixQMgrAqmIfQStatusCheck (UINT32 *oldQStatusWords,
-			 UINT32 *newQStatusWords,
-			 unsigned int statusWordOffset,			 
-			 UINT32 checkValue,
-			 UINT32 mask)
-{
-    if (((oldQStatusWords[statusWordOffset] & mask) != 
-	 (newQStatusWords[statusWordOffset] & mask)) &&
-	((newQStatusWords[statusWordOffset] & mask) == checkValue))
-    {
-	return true;
-    }
-
-    return false;
-}
-
-/*
- * The AQM interrupt register contains a bit for each AQM queue
- * specifying the queue (s) that cause an interrupt to fire. This
- * function is called by IxQMgrDispatcher component.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQInterruptRegRead (IxQMgrDispatchGroup group, 
-			      UINT32 *regVal)
-{
-    volatile UINT32 *regAddress;
-
-    if (group == IX_QMGR_QUELOW_GROUP)
-    {
-	regAddress = (UINT32*)(aqmBaseAddress +
-			       IX_QMGR_QINTREG0_OFFSET);
-    }
-    else
-    {
-	regAddress = (UINT32*)(aqmBaseAddress +
-			       IX_QMGR_QINTREG1_OFFSET);
-    }
-
-    ixQMgrAqmIfWordRead (regAddress, regVal);
-}
-
-/*
- * The AQM interrupt enable register contains a bit for each AQM queue.
- * This function reads the interrupt enable register. This
- * function is called by IxQMgrDispatcher component.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQInterruptEnableRegRead (IxQMgrDispatchGroup group, 
-			            UINT32 *regVal)
-{
-    volatile UINT32 *regAddress;
-
-    if (group == IX_QMGR_QUELOW_GROUP)
-    {
-	regAddress = (UINT32*)(aqmBaseAddress +
-			       IX_QMGR_QUEIEREG0_OFFSET);
-    }
-    else
-    {
-	regAddress = (UINT32*)(aqmBaseAddress +
-			       IX_QMGR_QUEIEREG1_OFFSET);
-    }
-
-    ixQMgrAqmIfWordRead (regAddress, regVal);
-}
-
-
-/*
- * This inline function will read the status bit of a queue
- * specified by qId. If reset is true the bit is cleared.
- */
-IX_QMGR_AQMIF_INLINE BOOL
-ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId, 
-			     UINT32 registerBaseAddrOffset,
-			     unsigned queuesPerRegWord,
-			     unsigned relativeBitOffset,
-			     BOOL reset)
-{
-    UINT32 actualBitOffset;
-    volatile UINT32 *registerAddress;
-    UINT32 registerWord;
-
-    /*
-     * Calculate the registerAddress
-     * multiple queues split accross registers
-     */
-    registerAddress = (UINT32*)(aqmBaseAddress +
-				registerBaseAddrOffset +
-				((qId / queuesPerRegWord) *
-				 IX_QMGR_NUM_BYTES_PER_WORD));
-
-    /*
-     * Get the status word
-     */
-    ixQMgrAqmIfWordRead (registerAddress, &registerWord);
-    
-    /*
-     * Calculate the actualBitOffset
-     * status for multiple queues stored in one register
-     */
-    actualBitOffset = (relativeBitOffset + 1) <<
-	((qId & (queuesPerRegWord - 1)) * (BITS_PER_WORD / queuesPerRegWord));
-
-    /* Check if the status bit is set */
-    if (registerWord & actualBitOffset)
-    {
-	/* Clear the bit if reset */
-	if (reset)
-	{
-	    ixQMgrAqmIfWordWrite (registerAddress, registerWord & (~actualBitOffset));
-	}
-	return true;
-    }
-
-    /* Bit not set */
-    return false;
-}
-
-
-/*
- * @ingroup IxQmgrAqmIfAPI
- *
- * @brief Read the underflow status of a queue 
- *
- * This inline function will read the underflow status of a queue
- * specified by qId.
- * 
- */
-IX_QMGR_AQMIF_INLINE BOOL
-ixQMgrAqmIfUnderflowCheck (IxQMgrQId qId)
-{
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-	return (ixQMgrAqmIfRegisterBitCheck (qId,
-					     IX_QMGR_QUEUOSTAT0_OFFSET,
-					     IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD,
-					     IX_QMGR_UNDERFLOW_BIT_OFFSET,
-					     true/*reset*/));
-    }
-    else
-    {
-	/* Qs 32-63 have no underflow status */
-	return false;
-    }
-}
-
-/*
- * This inline function will read the overflow status of a queue
- * specified by qId.
- */
-IX_QMGR_AQMIF_INLINE BOOL
-ixQMgrAqmIfOverflowCheck (IxQMgrQId qId)
-{
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-	return (ixQMgrAqmIfRegisterBitCheck (qId,
-					     IX_QMGR_QUEUOSTAT0_OFFSET,
-					     IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD,
-					     IX_QMGR_OVERFLOW_BIT_OFFSET,
-					     true/*reset*/));
-    }
-    else
-    {
-	/* Qs 32-63 have no overflow status */
-	return false;
-    }
-}
-
-/*
- * This inline function will read the status bits of a queue
- * specified by qId.
- */
-IX_QMGR_AQMIF_INLINE UINT32
-ixQMgrAqmIfQRegisterBitsRead (IxQMgrQId qId, 
-			      UINT32 registerBaseAddrOffset,
-			      unsigned queuesPerRegWord)
-{
-    volatile UINT32 *registerAddress;
-    UINT32 registerWord;
-    UINT32 statusBitsMask;
-    UINT32 bitsPerQueue;
-
-    bitsPerQueue = BITS_PER_WORD / queuesPerRegWord;
-
-    /*
-     * Calculate the registerAddress
-     * multiple queues split accross registers
-     */
-    registerAddress = (UINT32*)(aqmBaseAddress +
-				registerBaseAddrOffset +
-				((qId / queuesPerRegWord) *
-				 IX_QMGR_NUM_BYTES_PER_WORD));
-    /*
-     * Read the status word
-     */
-    ixQMgrAqmIfWordRead (registerAddress, &registerWord);
-    
-
-    /*
-     * Calculate the mask for the status bits for this queue.
-     */
-    statusBitsMask = ((1 << bitsPerQueue) - 1);
-
-    /*
-     * Shift the status word so it is right justified
-     */    
-    registerWord >>= ((qId & (queuesPerRegWord - 1)) * bitsPerQueue);
-
-    /*
-     * Mask out all bar the status bits for this queue
-     */
-    return (registerWord &= statusBitsMask);
-}
-
-/*
- * This function is called by IxQMgrDispatcher to set the contents of
- * the AQM interrupt register.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQInterruptRegWrite (IxQMgrDispatchGroup group, 
-			       UINT32 reg)
-{
-    volatile UINT32 *address;
-
-    if (group == IX_QMGR_QUELOW_GROUP)
-    {
-	address = (UINT32*)(aqmBaseAddress +
-			    IX_QMGR_QINTREG0_OFFSET);
-    }
-    else
-    {
-	address = (UINT32*)(aqmBaseAddress +
-			    IX_QMGR_QINTREG1_OFFSET);
-    }
-
-    ixQMgrAqmIfWordWrite (address, reg);
-}
-
-/*
- * Read the status of a queue in the range 0-31.
- *
- * This function is used by other QMgr components to read the
- * status of the queue specified by qId.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQueLowStatRead (IxQMgrQId qId,
-			   IxQMgrQStatus *status)
-{
-    /* Read the general status bits */
-    *status = ixQMgrAqmIfQRegisterBitsRead (qId,
-					    IX_QMGR_QUELOWSTAT0_OFFSET,
-					    IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD);
-}
-
-/*
- * This function will read the status of the queue specified
- * by qId.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQueUppStatRead (IxQMgrQId qId,
-			   IxQMgrQStatus *status)
-{
-    /* Reset the status bits */
-    *status = 0;
-
-    /* 
-     * Check if the queue is nearly empty,
-     * N.b. QUPP stat register contains status for regs 32-63 at each
-     *      bit position so subtract 32 to get bit offset
-     */
-    if (ixQMgrAqmIfRegisterBitCheck ((qId - IX_QMGR_MIN_QUEUPP_QID),
-				     IX_QMGR_QUEUPPSTAT0_OFFSET,
-				     IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD,
-				     0/*relativeBitOffset*/,
-				     false/*!reset*/))
-    {
-	*status |= IX_QMGR_Q_STATUS_NE_BIT_MASK;
-    }
-
-    /* 
-     * Check if the queue is full,
-     * N.b. QUPP stat register contains status for regs 32-63 at each
-     *      bit position so subtract 32 to get bit offset
-     */
-    if (ixQMgrAqmIfRegisterBitCheck ((qId - IX_QMGR_MIN_QUEUPP_QID),
-				     IX_QMGR_QUEUPPSTAT1_OFFSET,
-				     IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD,
-				     0/*relativeBitOffset*/,
-				     false/*!reset*/))
-    {
-	*status |= IX_QMGR_Q_STATUS_F_BIT_MASK;
-    }
-}
-
-/*
- * This function is used by other QMgr components to read the
- * status of the queue specified by qId.
- */
-IX_QMGR_AQMIF_INLINE void
-ixQMgrAqmIfQueStatRead (IxQMgrQId qId, 
-			IxQMgrQStatus *qStatus)
-{
-    if (qId < IX_QMGR_MIN_QUEUPP_QID)
-    {
-	ixQMgrAqmIfQueLowStatRead (qId, qStatus);
-    }
-    else
-    {
-	ixQMgrAqmIfQueUppStatRead (qId, qStatus);
-    }
-}
-
-
-/*
- * This function performs a mod division
- */
-IX_QMGR_AQMIF_INLINE unsigned
-ixQMgrAqmIfPow2NumDivide (unsigned numerator, 
-			  unsigned denominator)
-{
-    /* Number is evenly divisable by 2 */
-    return (numerator >> ixQMgrAqmIfLog2 (denominator));
-}
-
-/* Restore IX_COMPONENT_NAME */
-#undef IX_COMPONENT_NAME
-#define IX_COMPONENT_NAME IX_QMGR_AQMIF_SAVED_COMPONENT_NAME
-
-#endif/*IXQMGRAQMIF_P_H*/
diff --git a/drivers/net/npe/include/IxQMgrDefines_p.h b/drivers/net/npe/include/IxQMgrDefines_p.h
deleted file mode 100644
index 1c5d674..0000000
--- a/drivers/net/npe/include/IxQMgrDefines_p.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/**
- * @file    IxQMgrDefines_p.h
- *
- * @author Intel Corporation
- * @date    19-Jul-2002
- *
- * @brief   IxQMgr Defines and tuneable constants
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-#ifndef IXQMGRDEFINES_P_H
-#define IXQMGRDEFINES_P_H
-
-#define IX_QMGR_PARM_CHECKS_ENABLED   1
-#define IX_QMGR_STATS_UPDATE_ENABLED  1
-
-#endif /* IXQMGRDEFINES_P_H */
diff --git a/drivers/net/npe/include/IxQMgrDispatcher_p.h b/drivers/net/npe/include/IxQMgrDispatcher_p.h
deleted file mode 100644
index b68a3f1..0000000
--- a/drivers/net/npe/include/IxQMgrDispatcher_p.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/**
- * @file    IxQMgrDispatcher_p.h
- *
- * @author Intel Corporation
- * @date    07-Feb-2002
- *
- * @brief   This file contains the internal functions for dispatcher
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-#ifndef IXQMGRDISPATCHER_P_H
-#define IXQMGRDISPATCHER_P_H
-
-/*
- * User defined include files
- */
-#include "IxQMgr.h"
-
-/*
- * This structure defines the statistic data for a queue
- */
-typedef struct
-{
-    unsigned callbackCnt;       /* Call count of callback                    */
-    unsigned priorityChangeCnt; /* Priority change count                     */
-    unsigned intNoCallbackCnt;  /* Interrupt fired but no callback set count */
-    unsigned intLostCallbackCnt;  /* Interrupt lost and detected ;  SCR541   */
-    BOOL notificationEnabled;    /* Interrupt enabled for this queue         */
-    IxQMgrSourceId srcSel;       /* interrupt source                         */
-    unsigned enableCount;        /* num times notif enabled by LLP           */
-    unsigned disableCount;       /* num of times notif disabled by LLP       */
-} IxQMgrDispatcherQStats;
-
-/*
- * This structure defines statistic data for the disatcher
- */
-typedef struct
- {
-    unsigned loopRunCnt;       /* ixQMgrDispatcherLoopRun count */
-
-    IxQMgrDispatcherQStats queueStats[IX_QMGR_MAX_NUM_QUEUES];
-
-} IxQMgrDispatcherStats;
-
-/*
- * Initialise the dispatcher component
- */
-void
-ixQMgrDispatcherInit (void);
-
-/*
- * Get the dispatcher statistics
- */
-IxQMgrDispatcherStats*
-ixQMgrDispatcherStatsGet (void);
-
-/**
- * Retrieve the number of leading zero bits starting from the MSB 
- * This function is implemented as an (extremely fast) asm routine 
- * for XSCALE processor (see clz instruction) and as a (slower) C 
- * function for other systems.
- */
-unsigned int
-ixQMgrCountLeadingZeros(unsigned int value);
-
-#endif/*IXQMGRDISPATCHER_P_H*/
-
-
diff --git a/drivers/net/npe/include/IxQMgrLog_p.h b/drivers/net/npe/include/IxQMgrLog_p.h
deleted file mode 100644
index 941236a..0000000
--- a/drivers/net/npe/include/IxQMgrLog_p.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/**
- * @file    IxQMgrLog_p.h
- *
- * @author Intel Corporation
- * @date    07-Feb-2002
- *
- * @brief   This file contains the internal functions for config
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-#ifndef IXQMGRLOG_P_H
-#define IXQMGRLOG_P_H
-
-/*
- * User defined header files
- */
-#include "IxOsal.h"
-
-/*
- * Macros
- */
-
-#define IX_QMGR_LOG0(string) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, string, 0, 0, 0, 0, 0, 0);\
-}while(0);
-
-#define IX_QMGR_LOG1(string, arg1) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, 0, 0, 0, 0, 0);\
-}while(0);
-
-#define IX_QMGR_LOG2(string, arg1, arg2) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, (int)arg2, 0, 0, 0, 0);\
-}while(0);
-
-#define IX_QMGR_LOG3(string, arg1, arg2, arg3) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, (int)arg2, (int)arg3, 0, 0, 0);\
-}while(0);
-
-#define IX_QMGR_LOG6(string, arg1, arg2, arg3, arg4, arg5, arg6) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, (int)arg2, (int)arg3, (int)arg4, (int)arg5, (int)arg6); \
-}while(0);
-
-#define IX_QMGR_LOG_WARNING0(string) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, string, 0, 0, 0, 0, 0, 0);\
-}while(0);
-
-#define IX_QMGR_LOG_WARNING1(string, arg1) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, 0, 0, 0, 0, 0);\
-}while(0);
-
-#define IX_QMGR_LOG_WARNING2(string, arg1, arg2) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, (int)arg2, 0, 0, 0, 0);\
-}while(0);
-
-#define IX_QMGR_LOG_ERROR0(string) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, string, 0, 0, 0, 0, 0, 0);\
-}while(0);
-
-#define IX_QMGR_LOG_ERROR1(string, arg1) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, string, (int)arg1, 0, 0, 0, 0, 0);\
-}while(0);
-
-#define IX_QMGR_LOG_ERROR2(string, arg1, arg2) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, string, (int)arg1, (int)arg2, 0, 0, 0, 0);\
-}while(0);
-
-#define IX_QMGR_LOG_ERROR3(string, arg1, arg2, arg3) do\
-{\
-    ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, string, (int)arg1, (int)arg2, (int)arg3, 0, 0, 0);\
-}while(0);
-#endif /* IX_QMGRLOG_P_H */
-
-
-
-
diff --git a/drivers/net/npe/include/IxQMgrQAccess_p.h b/drivers/net/npe/include/IxQMgrQAccess_p.h
deleted file mode 100644
index 363622f..0000000
--- a/drivers/net/npe/include/IxQMgrQAccess_p.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/**
- * @file    IxQMgrQAccess_p.h
- *
- * @author Intel Corporation
- * @date    30-Oct-2001
- *
- * @brief   QAccess private header file
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-#ifndef IXQMGRQACCESS_P_H
-#define IXQMGRQACCESS_P_H
-
-/*
- * User defined header files
- */
-#include "IxQMgr.h"
-
-/* 
- * Global variables declarations.
- */
-extern volatile UINT32 * ixQMgrAqmIfQueAccRegAddr[]; 
-
-/* 
- * Initialise the Queue Access component
- */
-void
-ixQMgrQAccessInit (void);
-
-/*
- * read the remainder of a multi-word queue entry 
- * (the first word is already read)
- */
-IX_STATUS
-ixQMgrQReadMWordsMinus1 (IxQMgrQId qId,
-                         UINT32 *entry);
-
-/*
- * Fast access : pop a q entry from a single word queue
- */
-extern __inline__ UINT32 ixQMgrQAccessPop(IxQMgrQId qId);
-
-extern __inline__ UINT32 ixQMgrQAccessPop(IxQMgrQId qId)
-{
-  return *(ixQMgrAqmIfQueAccRegAddr[qId]);
-}
-
-/*
- * Fast access : push a q entry in a single word queue
- */
-extern __inline__ void ixQMgrQAccessPush(IxQMgrQId qId, UINT32 entry);
-
-extern __inline__ void ixQMgrQAccessPush(IxQMgrQId qId, UINT32 entry)
-{
-  *(ixQMgrAqmIfQueAccRegAddr[qId]) = entry;
-}
-
-#endif/*IXQMGRQACCESS_P_H*/
diff --git a/drivers/net/npe/include/IxQMgrQCfg_p.h b/drivers/net/npe/include/IxQMgrQCfg_p.h
deleted file mode 100644
index 5480214..0000000
--- a/drivers/net/npe/include/IxQMgrQCfg_p.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/**
- * @file    IxQMgrQCfg_p.h
- *
- * @author Intel Corporation
- * @date    07-Feb-2002
- *
- * @brief   This file contains the internal functions for config
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-#ifndef IXQMGRQCFG_P_H
-#define IXQMGRQCFG_P_H
-
-/*
- * User defined header files
- */
-#include "IxQMgr.h"
-
-/*
- * Typedefs
- */
-typedef struct
-{
-    unsigned wmSetCnt;    
-
-    struct
-    {
-	char *qName;
-	BOOL isConfigured;	
-	unsigned int qSizeInWords;
-	unsigned int qEntrySizeInWords;
-	unsigned int ne;
-	unsigned int nf;
-	unsigned int numEntries;
-	UINT32 baseAddress;
-	UINT32 readPtr;
-	UINT32 writePtr;
-    } qStats[IX_QMGR_MAX_NUM_QUEUES];
-
-} IxQMgrQCfgStats;
-
-/*
- * Initialize the QCfg subcomponent
- */ 
-void
-ixQMgrQCfgInit (void);
-
-/*
- * Uninitialize the QCfg subcomponent
- */ 
-void
-ixQMgrQCfgUninit (void);
-
-/*
- * Get the Q size in words
- */ 
-IxQMgrQSizeInWords
-ixQMgrQSizeInWordsGet (IxQMgrQId qId);
-
-/*
- * Get the Q entry size in words
- */ 
-IxQMgrQEntrySizeInWords
-ixQMgrQEntrySizeInWordsGet (IxQMgrQId qId);
-
-/*
- * Get the generic cfg stats
- */
-IxQMgrQCfgStats*
-ixQMgrQCfgStatsGet (void);
-
-/*
- * Get queue specific stats
- */
-IxQMgrQCfgStats*
-ixQMgrQCfgQStatsGet (IxQMgrQId qId);
-
-/*
- * Check is the queue configured
- */
-BOOL
-ixQMgrQIsConfigured(IxQMgrQId qId);
- 
-#endif /* IX_QMGRQCFG_P_H */
diff --git a/drivers/net/npe/include/IxQueueAssignments.h b/drivers/net/npe/include/IxQueueAssignments.h
deleted file mode 100644
index 28b9247..0000000
--- a/drivers/net/npe/include/IxQueueAssignments.h
+++ /dev/null
@@ -1,492 +0,0 @@
-/**
- * @file IxQueueAssignments.h
- *
- * @author Intel Corporation
- * @date 29-Oct-2004
- *
- * @brief Central definition for queue assignments
- *
- * Design Notes:
- * This file contains queue assignments used by Ethernet (EthAcc),
- * HSS (HssAcc), ATM (atmdAcc) and DMA (dmaAcc) access libraries.
- *
- * Note: Ethernet QoS traffic class definitions are managed separately
- * by EthDB in IxEthDBQoS.h.
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-#ifndef IxQueueAssignments_H
-#define IxQueueAssignments_H
-
-#include "IxQMgr.h"
-
-/***************************************************************************
- *  Queue assignments for ATM
- ***************************************************************************/
-
-/** 
- * @brief Global compiler switch to select between 3 possible NPE Modes
- * Define this macro to enable MPHY mode
- *
- * Default(No Switch) = MultiPHY Utopia2
- * IX_UTOPIAMODE = 1 for single Phy Utopia1
- * IX_MPHYSINGLEPORT = 1 for single Phy Utopia2 
- */
-#define IX_NPE_MPHYMULTIPORT 1
-#if IX_UTOPIAMODE == 1
-#undef  IX_NPE_MPHYMULTIPORT
-#endif
-#if IX_MPHYSINGLEPORT == 1
-#undef  IX_NPE_MPHYMULTIPORT
-#endif
-
-/**
- * @def IX_NPE_A_TXDONE_QUEUE_HIGHWATERMARK
- *
- * @brief The NPE reserves the High Watermark for its operation. But it must be set by the Xscale
- */
-#define IX_NPE_A_TXDONE_QUEUE_HIGHWATERMARK  2
-
-/**
- * @def IX_NPE_A_QMQ_ATM_TX_DONE
- *
- * @brief Queue ID for ATM Transmit Done queue
- */
-#define IX_NPE_A_QMQ_ATM_TX_DONE       IX_QMGR_QUEUE_1
-
-/**
- * @def IX_NPE_A_QMQ_ATM_TX0
- *
- * @brief Queue ID for ATM transmit Queue in a single phy configuration
- */
-#define IX_NPE_A_QMQ_ATM_TX0           IX_QMGR_QUEUE_2
-
-
-/**
- * @def IX_NPE_A_QMQ_ATM_TXID_MIN
- *
- * @brief Queue Manager Queue ID for ATM transmit Queue with minimum number of queue
- *
- */
-
-/**
- * @def IX_NPE_A_QMQ_ATM_TXID_MAX
- *
- * @brief Queue Manager Queue ID for ATM transmit Queue with maximum number of queue
- *
- */
-
-/**
- * @def IX_NPE_A_QMQ_ATM_RX_HI
- *
- * @brief Queue Manager Queue ID for ATM Receive high Queue
- *
- */
-
-/**
- * @def IX_NPE_A_QMQ_ATM_RX_LO
- *
- * @brief Queue Manager Queue ID for ATM Receive low Queue
- */
-
-#ifdef IX_NPE_MPHYMULTIPORT
-/**
- * @def IX_NPE_A_QMQ_ATM_TX1
- *
- * @brief Queue ID for ATM transmit Queue Multiphy from 1 to 11
- */
-#define IX_NPE_A_QMQ_ATM_TX1           IX_NPE_A_QMQ_ATM_TX0+1
-#define IX_NPE_A_QMQ_ATM_TX2           IX_NPE_A_QMQ_ATM_TX1+1
-#define IX_NPE_A_QMQ_ATM_TX3           IX_NPE_A_QMQ_ATM_TX2+1
-#define IX_NPE_A_QMQ_ATM_TX4           IX_NPE_A_QMQ_ATM_TX3+1
-#define IX_NPE_A_QMQ_ATM_TX5           IX_NPE_A_QMQ_ATM_TX4+1
-#define IX_NPE_A_QMQ_ATM_TX6           IX_NPE_A_QMQ_ATM_TX5+1
-#define IX_NPE_A_QMQ_ATM_TX7           IX_NPE_A_QMQ_ATM_TX6+1
-#define IX_NPE_A_QMQ_ATM_TX8           IX_NPE_A_QMQ_ATM_TX7+1
-#define IX_NPE_A_QMQ_ATM_TX9           IX_NPE_A_QMQ_ATM_TX8+1
-#define IX_NPE_A_QMQ_ATM_TX10          IX_NPE_A_QMQ_ATM_TX9+1
-#define IX_NPE_A_QMQ_ATM_TX11          IX_NPE_A_QMQ_ATM_TX10+1
-#define IX_NPE_A_QMQ_ATM_TXID_MIN      IX_NPE_A_QMQ_ATM_TX0
-#define IX_NPE_A_QMQ_ATM_TXID_MAX      IX_NPE_A_QMQ_ATM_TX11
-#define IX_NPE_A_QMQ_ATM_RX_HI         IX_QMGR_QUEUE_21
-#define IX_NPE_A_QMQ_ATM_RX_LO         IX_QMGR_QUEUE_22
-#else
-#define IX_NPE_A_QMQ_ATM_TXID_MIN      IX_NPE_A_QMQ_ATM_TX0
-#define IX_NPE_A_QMQ_ATM_TXID_MAX      IX_NPE_A_QMQ_ATM_TX0
-#define IX_NPE_A_QMQ_ATM_RX_HI         IX_QMGR_QUEUE_10
-#define IX_NPE_A_QMQ_ATM_RX_LO         IX_QMGR_QUEUE_11
-#endif /* MPHY */
-
-/**
- * @def IX_NPE_A_QMQ_ATM_FREE_VC0
- *
- * @brief Hardware QMgr Queue ID for ATM Free VC Queue.
- *
- * There are 32 Hardware QMgr Queue ID; from IX_NPE_A_QMQ_ATM_FREE_VC1 to
- * IX_NPE_A_QMQ_ATM_FREE_VC30
- */
-#define IX_NPE_A_QMQ_ATM_FREE_VC0      IX_QMGR_QUEUE_32
-#define IX_NPE_A_QMQ_ATM_FREE_VC1      IX_NPE_A_QMQ_ATM_FREE_VC0+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC2      IX_NPE_A_QMQ_ATM_FREE_VC1+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC3      IX_NPE_A_QMQ_ATM_FREE_VC2+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC4      IX_NPE_A_QMQ_ATM_FREE_VC3+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC5      IX_NPE_A_QMQ_ATM_FREE_VC4+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC6      IX_NPE_A_QMQ_ATM_FREE_VC5+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC7      IX_NPE_A_QMQ_ATM_FREE_VC6+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC8      IX_NPE_A_QMQ_ATM_FREE_VC7+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC9      IX_NPE_A_QMQ_ATM_FREE_VC8+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC10     IX_NPE_A_QMQ_ATM_FREE_VC9+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC11     IX_NPE_A_QMQ_ATM_FREE_VC10+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC12     IX_NPE_A_QMQ_ATM_FREE_VC11+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC13     IX_NPE_A_QMQ_ATM_FREE_VC12+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC14     IX_NPE_A_QMQ_ATM_FREE_VC13+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC15     IX_NPE_A_QMQ_ATM_FREE_VC14+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC16     IX_NPE_A_QMQ_ATM_FREE_VC15+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC17     IX_NPE_A_QMQ_ATM_FREE_VC16+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC18     IX_NPE_A_QMQ_ATM_FREE_VC17+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC19     IX_NPE_A_QMQ_ATM_FREE_VC18+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC20     IX_NPE_A_QMQ_ATM_FREE_VC19+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC21     IX_NPE_A_QMQ_ATM_FREE_VC20+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC22     IX_NPE_A_QMQ_ATM_FREE_VC21+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC23     IX_NPE_A_QMQ_ATM_FREE_VC22+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC24     IX_NPE_A_QMQ_ATM_FREE_VC23+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC25     IX_NPE_A_QMQ_ATM_FREE_VC24+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC26     IX_NPE_A_QMQ_ATM_FREE_VC25+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC27     IX_NPE_A_QMQ_ATM_FREE_VC26+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC28     IX_NPE_A_QMQ_ATM_FREE_VC27+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC29     IX_NPE_A_QMQ_ATM_FREE_VC28+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC30     IX_NPE_A_QMQ_ATM_FREE_VC29+1
-#define IX_NPE_A_QMQ_ATM_FREE_VC31     IX_NPE_A_QMQ_ATM_FREE_VC30+1
-
-/**
- * @def IX_NPE_A_QMQ_ATM_RXFREE_MIN
- *
- * @brief The minimum queue ID for FreeVC queue
- */
-#define IX_NPE_A_QMQ_ATM_RXFREE_MIN  IX_NPE_A_QMQ_ATM_FREE_VC0
-
-/**
- * @def IX_NPE_A_QMQ_ATM_RXFREE_MAX
- *
- * @brief The maximum queue ID for FreeVC queue
- */
-#define IX_NPE_A_QMQ_ATM_RXFREE_MAX  IX_NPE_A_QMQ_ATM_FREE_VC31
-
-/**
- * @def IX_NPE_A_QMQ_OAM_FREE_VC
- * @brief OAM Rx Free queue ID
- */
-#ifdef IX_NPE_MPHYMULTIPORT
-#define IX_NPE_A_QMQ_OAM_FREE_VC       IX_QMGR_QUEUE_14
-#else
-#define IX_NPE_A_QMQ_OAM_FREE_VC       IX_QMGR_QUEUE_3
-#endif /* MPHY */
-
-/****************************************************************************
- * Queue assignments for HSS
- ****************************************************************************/
-
-/****  HSS Port 0 ****/
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_CHL_RX_TRIG
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Channelized Receive trigger
- */
-#define IX_NPE_A_QMQ_HSS0_CHL_RX_TRIG   IX_QMGR_QUEUE_12
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_PKT_RX
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Receive
- */
-#define IX_NPE_A_QMQ_HSS0_PKT_RX        IX_QMGR_QUEUE_13
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_PKT_TX0
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Transmit queue 0
- */
-#define IX_NPE_A_QMQ_HSS0_PKT_TX0       IX_QMGR_QUEUE_14
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_PKT_TX1
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Transmit queue 1
- */
-#define IX_NPE_A_QMQ_HSS0_PKT_TX1       IX_QMGR_QUEUE_15
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_PKT_TX2
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Transmit queue 2
- */
-#define IX_NPE_A_QMQ_HSS0_PKT_TX2       IX_QMGR_QUEUE_16
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_PKT_TX3
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Transmit queue 3
- */
-#define IX_NPE_A_QMQ_HSS0_PKT_TX3       IX_QMGR_QUEUE_17
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_PKT_RX_FREE0
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Receive Free queue 0
- */
-#define IX_NPE_A_QMQ_HSS0_PKT_RX_FREE0  IX_QMGR_QUEUE_18
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_PKT_RX_FREE1
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Receive Free queue 1
- */
-#define IX_NPE_A_QMQ_HSS0_PKT_RX_FREE1  IX_QMGR_QUEUE_19
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_PKT_RX_FREE2
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Receive Free queue 2
- */
-#define IX_NPE_A_QMQ_HSS0_PKT_RX_FREE2  IX_QMGR_QUEUE_20
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_PKT_RX_FREE3
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Receive Free queue 3
- */
-#define IX_NPE_A_QMQ_HSS0_PKT_RX_FREE3  IX_QMGR_QUEUE_21
-
-/**
- * @def IX_NPE_A_QMQ_HSS0_PKT_TX_DONE
- *
- * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Transmit Done queue
- */
-#define IX_NPE_A_QMQ_HSS0_PKT_TX_DONE   IX_QMGR_QUEUE_22
-
-/****  HSS Port 1 ****/
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_CHL_RX_TRIG
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Channelized Receive trigger
- */
-#define IX_NPE_A_QMQ_HSS1_CHL_RX_TRIG   IX_QMGR_QUEUE_10
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_PKT_RX
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Receive
- */
-#define IX_NPE_A_QMQ_HSS1_PKT_RX        IX_QMGR_QUEUE_0
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_PKT_TX0
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Transmit queue 0
- */
-#define IX_NPE_A_QMQ_HSS1_PKT_TX0       IX_QMGR_QUEUE_5
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_PKT_TX1
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Transmit queue 1
- */
-#define IX_NPE_A_QMQ_HSS1_PKT_TX1       IX_QMGR_QUEUE_6
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_PKT_TX2
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Transmit queue 2
- */
-#define IX_NPE_A_QMQ_HSS1_PKT_TX2       IX_QMGR_QUEUE_7
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_PKT_TX3
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Transmit queue 3
- */
-#define IX_NPE_A_QMQ_HSS1_PKT_TX3       IX_QMGR_QUEUE_8
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_PKT_RX_FREE0
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Receive Free queue 0
- */
-#define IX_NPE_A_QMQ_HSS1_PKT_RX_FREE0  IX_QMGR_QUEUE_1
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_PKT_RX_FREE1
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Receive Free queue 1
- */
-#define IX_NPE_A_QMQ_HSS1_PKT_RX_FREE1  IX_QMGR_QUEUE_2
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_PKT_RX_FREE2
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Receive Free queue 2
- */
-#define IX_NPE_A_QMQ_HSS1_PKT_RX_FREE2  IX_QMGR_QUEUE_3
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_PKT_RX_FREE3
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Receive Free queue 3
- */
-#define IX_NPE_A_QMQ_HSS1_PKT_RX_FREE3  IX_QMGR_QUEUE_4
-
-/**
- * @def IX_NPE_A_QMQ_HSS1_PKT_TX_DONE
- *
- * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Transmit Done queue
- */
-#define IX_NPE_A_QMQ_HSS1_PKT_TX_DONE   IX_QMGR_QUEUE_9
-
-/*****************************************************************************************
- * Queue assignments for DMA
- *****************************************************************************************/
-
-#define IX_DMA_NPE_A_REQUEST_QID IX_QMGR_QUEUE_19   /**< Queue Id for NPE A DMA Request */
-#define IX_DMA_NPE_A_DONE_QID    IX_QMGR_QUEUE_20   /**< Queue Id for NPE A DMA Done    */
-#define IX_DMA_NPE_B_REQUEST_QID IX_QMGR_QUEUE_24   /**< Queue Id for NPE B DMA Request */
-#define IX_DMA_NPE_B_DONE_QID    IX_QMGR_QUEUE_26   /**< Queue Id for NPE B DMA Done    */
-#define IX_DMA_NPE_C_REQUEST_QID IX_QMGR_QUEUE_25   /**< Queue Id for NPE C DMA Request */
-#define IX_DMA_NPE_C_DONE_QID    IX_QMGR_QUEUE_27   /**< Queue Id for NPE C DMA Done    */
-
-
-/*****************************************************************************************
- * Queue assignments for Ethernet
- *
- * Note: Rx queue definitions, which include QoS traffic class definitions
- * are managed by EthDB and declared in IxEthDBQoS.h
- *****************************************************************************************/
-
-/**
-*
-* @def IX_ETH_ACC_RX_FRAME_ETH_Q 
-*
-* @brief  Eth0/Eth1 NPE Frame Receive Q.
-*
-* @note THIS IS NOT USED - the Rx queues are read from EthDB QoS configuration
-* 
-*/
-#define IX_ETH_ACC_RX_FRAME_ETH_Q	(IX_QMGR_QUEUE_4)
-
-/**
-*
-* @def IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q
-*
-* @brief Supply Rx Buffers Ethernet Q for NPEB - Eth 0 - Port 1
-*
-*/
-#define IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q    (IX_QMGR_QUEUE_27)
-
-/**
-*
-* @def IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q
-*
-* @brief Supply Rx Buffers Ethernet Q for NPEC - Eth 1 - Port 2
-*
-*/
-#define IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q    (IX_QMGR_QUEUE_28)
-
-/**
-*
-* @def IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q
-*
-* @brief Supply Rx Buffers Ethernet Q for NPEA - Eth 2 - Port 3
-*
-*/
-#define IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q    (IX_QMGR_QUEUE_26)
-
-
-/**
-*
-* @def IX_ETH_ACC_TX_FRAME_ENET0_Q
-*
-* @brief Submit frame Q for NPEB Eth 0 - Port 1
-*
-*/
-#define IX_ETH_ACC_TX_FRAME_ENET0_Q    (IX_QMGR_QUEUE_24)
-
-
-/**
-*
-* @def IX_ETH_ACC_TX_FRAME_ENET1_Q
-*
-* @brief Submit frame Q for NPEC Eth 1 - Port 2
-*
-*/
-#define IX_ETH_ACC_TX_FRAME_ENET1_Q    (IX_QMGR_QUEUE_25)
-
-/**
-*
-* @def IX_ETH_ACC_TX_FRAME_ENET2_Q
-*
-* @brief Submit frame Q for NPEA Eth 2 - Port 3
-*
-*/
-#define IX_ETH_ACC_TX_FRAME_ENET2_Q    (IX_QMGR_QUEUE_23)
-
-/**
-*
-* @def IX_ETH_ACC_TX_FRAME_DONE_ETH_Q
-*
-* @brief Transmit complete Q for NPE Eth 0/1, Port 1&2
-*
-*/
-#define IX_ETH_ACC_TX_FRAME_DONE_ETH_Q    (IX_QMGR_QUEUE_31)
-
-/*****************************************************************************************
- * Queue assignments for Crypto
- *****************************************************************************************/
-
-/** Crypto Service Request Queue */
-#define IX_CRYPTO_ACC_CRYPTO_REQ_Q  (IX_QMGR_QUEUE_29)
-
-/** Crypto Service Done Queue */
-#define IX_CRYPTO_ACC_CRYPTO_DONE_Q (IX_QMGR_QUEUE_30)
-
-/** Crypto Req Q CB tag */
-#define IX_CRYPTO_ACC_CRYPTO_REQ_Q_CB_TAG   (0)
-
-/** Crypto Done Q CB tag */
-#define IX_CRYPTO_ACC_CRYPTO_DONE_Q_CB_TAG  (1)
-
-/** WEP Service Request Queue */
-#define IX_CRYPTO_ACC_WEP_REQ_Q  (IX_QMGR_QUEUE_21)
-
-/** WEP Service Done Queue */
-#define IX_CRYPTO_ACC_WEP_DONE_Q (IX_QMGR_QUEUE_22)
-
-/** WEP Req Q CB tag */
-#define IX_CRYPTO_ACC_WEP_REQ_Q_CB_TAG      (2)
-
-/** WEP Done Q CB tag */
-#define IX_CRYPTO_ACC_WEP_DONE_Q_CB_TAG     (3)
-
-/** Number of queues allocate to crypto hardware accelerator services */
-#define IX_CRYPTO_ACC_NUM_OF_CRYPTO_Q       (2)
-
-/** Number of queues allocate to WEP NPE services */
-#define IX_CRYPTO_ACC_NUM_OF_WEP_NPE_Q      (2)
-                                                      
-/** Number of queues allocate to CryptoAcc component */
-#define IX_CRYPTO_ACC_NUM_OF_Q (IX_CRYPTO_ACC_NUM_OF_CRYPTO_Q + IX_CRYPTO_ACC_NUM_OF_WEP_NPE_Q)   
-
-#endif /* IxQueueAssignments_H */
diff --git a/drivers/net/npe/include/IxSspAcc.h b/drivers/net/npe/include/IxSspAcc.h
deleted file mode 100644
index b4a9def..0000000
--- a/drivers/net/npe/include/IxSspAcc.h
+++ /dev/null
@@ -1,1247 +0,0 @@
-/**
- * @file IxSspAcc.h
- *
- * @brief  Header file for the IXP400 SSP Serial Port Access (IxSspAcc)
- *
- * @version $Revision: 0.1 $
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxSspAcc IXP400 SSP Serial Port Access (IxSspAcc) API 
- *
- * @brief IXP400 SSP Serial Port Access Public API
- *
- * @{
- */
-#ifndef IXSSPACC_H
-#define IXSSPACC_H
-
-#ifdef __ixp46X
-
-#include "IxOsal.h"
-
-/*
- * Section for enum
- */
-/**
- * @ingroup IxSspAcc
- * 
- * @enum IxSspAccDataSize
- *
- * @brief The data sizes in bits that are supported by the protocol
- */
-typedef enum
-{
-	DATA_SIZE_TOO_SMALL = 0x2,
-	DATA_SIZE_4 = 0x3,
-	DATA_SIZE_5,
-	DATA_SIZE_6,
-	DATA_SIZE_7,
-	DATA_SIZE_8,
-	DATA_SIZE_9,
-	DATA_SIZE_10,
-	DATA_SIZE_11,
-	DATA_SIZE_12,
-	DATA_SIZE_13,
-	DATA_SIZE_14,
-	DATA_SIZE_15,
-	DATA_SIZE_16,
-	DATA_SIZE_TOO_BIG
-} IxSspAccDataSize;
-
-/**
- * @ingroup IxSspAcc
- * 
- * @enum IxSspAccPortStatus
- *
- * @brief The status of the SSP port to be set to enable/disable
- */
-typedef enum
-{
-	SSP_PORT_DISABLE = 0x0,
-	SSP_PORT_ENABLE,
-	INVALID_SSP_PORT_STATUS
-} IxSspAccPortStatus;
-
-/**
- * @ingroup IxSspAcc
- * 
- * @enum IxSspAccFrameFormat
- *
- * @brief The frame format that is to be used - SPI, SSP, or Microwire
- */
-typedef enum
-{
-	SPI_FORMAT = 0x0,
-	SSP_FORMAT,
-	MICROWIRE_FORMAT,
-	INVALID_FORMAT
-} IxSspAccFrameFormat;
-
-/**
- * @ingroup IxSspAcc
- * 
- * @enum IxSspAccClkSource
- *
- * @brief The source to produce the SSP serial clock
- */
-typedef enum
-{
-	ON_CHIP_CLK = 0x0,
-	EXTERNAL_CLK,
-	INVALID_CLK_SOURCE
-} IxSspAccClkSource;
-
-/**
- * @ingroup IxSspAcc
- * 
- * @enum IxSspAccSpiSclkPhase
- *
- * @brief The SPI SCLK Phase: 
- * 0 - SCLK is inactive one cycle at the start of a frame and 1/2 cycle at the
- *		end of a frame.
- * 1 - SCLK is inactive 1/2 cycle at the start of a frame and one cycle at the
- *		end of a frame.
- */
-typedef enum
-{
-	START_ONE_END_HALF = 0x0,
-	START_HALF_END_ONE,
-	INVALID_SPI_PHASE
-} IxSspAccSpiSclkPhase;
-
-/**
- * @ingroup IxSspAcc
- * 
- * @enum IxSspAccSpiSclkPolarity
- *
- * @brief The SPI SCLK Polarity can be set to either low or high.
- */
-typedef enum
-{
-	SPI_POLARITY_LOW = 0x0,
-	SPI_POLARITY_HIGH,
-	INVALID_SPI_POLARITY
-} IxSspAccSpiSclkPolarity;
-
-/**
- * @ingroup IxSspAcc
- * 
- * @enum IxSspAccMicrowireCtlWord
- *
- * @brief The Microwire control word can be either 8 or 16 bit.
- */
-typedef enum
-{
-	MICROWIRE_8_BIT = 0x0,
-	MICROWIRE_16_BIT,
-	INVALID_MICROWIRE_CTL_WORD
-} IxSspAccMicrowireCtlWord;
-
-/**
- * @ingroup IxSspAcc
- * 
- * @enum IxSspAccFifoThreshold
- *
- * @brief The threshold in frames (each frame is defined by IxSspAccDataSize)
- *			that can be set for the FIFO to trigger a threshold exceed when
- *			checking with the ExceedThresholdCheck functions or an interrupt
- *			when it is enabled.
- */
-typedef enum
-{
-	FIFO_TSHLD_1 =	0x0,
-	FIFO_TSHLD_2,
-	FIFO_TSHLD_3,
-	FIFO_TSHLD_4,
-	FIFO_TSHLD_5,
-	FIFO_TSHLD_6,
-	FIFO_TSHLD_7,
-	FIFO_TSHLD_8,
-	FIFO_TSHLD_9,
-	FIFO_TSHLD_10,
-	FIFO_TSHLD_11,
-	FIFO_TSHLD_12,
-	FIFO_TSHLD_13,
-	FIFO_TSHLD_14,
-	FIFO_TSHLD_15,
-	FIFO_TSHLD_16,
-	INVALID_FIFO_TSHLD
-} IxSspAccFifoThreshold;
-
-/**
- * @ingroup IxSspAcc
- * 
- * @enum IX_SSP_STATUS
- *
- * @brief The statuses that can be returned in a SSP Serial Port Access
- */
-typedef enum
-{
-	IX_SSP_SUCCESS = IX_SUCCESS, /**< Success status */
-	IX_SSP_FAIL, /**< Fail status */
-	IX_SSP_RX_FIFO_OVERRUN_HANDLER_MISSING, /**<
-						Rx FIFO Overrun handler is NULL. */
-	IX_SSP_RX_FIFO_HANDLER_MISSING, /**<
-					Rx FIFO threshold hit or above handler is NULL
-					*/
-	IX_SSP_TX_FIFO_HANDLER_MISSING, /**<
-					Tx FIFO threshold hit or below handler is NULL
-					*/
-	IX_SSP_FIFO_NOT_EMPTY_FOR_SETTING_CTL_CMD, /**<
-					Tx FIFO not empty and therefore microwire
-					control command size setting is not allowed.	*/
-	IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE, /**<
-					frame format selected is invalid. */
-	IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE, /**<
-					data size selected is invalid. */
-	IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE, /**<
-					source clock selected is invalid. */
-	IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE, /**<
-					Tx FIFO threshold selected is invalid. */
-	IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE, /**<
-					Rx FIFO threshold selected is invalid. */
-	IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE, /**<
-					SPI phase selected is invalid. */
-	IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE, /**<
-					SPI polarity selected is invalid. */
-	IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE, /**<
-					Microwire control command selected is invalid
-					*/
-	IX_SSP_INT_UNBIND_FAIL, /**< Interrupt unbind fail to unbind SSP
-	                interrupt */
-	IX_SSP_INT_BIND_FAIL, /**< Interrupt bind fail during init */
-	IX_SSP_RX_FIFO_NOT_EMPTY, /**<
-					Rx FIFO not empty while trying to change data
-					size. */
-	IX_SSP_TX_FIFO_NOT_EMPTY, /**<
-					Rx FIFO not empty while trying to change data
-					size or microwire control command size.	*/
-	IX_SSP_POLL_MODE_BLOCKING, /**<
-					poll mode selected blocks interrupt mode from
-					being selected.	*/
-	IX_SSP_TX_FIFO_HIT_BELOW_THRESHOLD, /**<
-					Tx FIFO level hit or below threshold. */
-	IX_SSP_TX_FIFO_EXCEED_THRESHOLD, /**<
-					Tx FIFO level exceeded threshold. */
-	IX_SSP_RX_FIFO_HIT_ABOVE_THRESHOLD, /**<
-					Rx FIFO level hit or exceeded threshold. */
-	IX_SSP_RX_FIFO_BELOW_THRESHOLD, /**<
-					Rx FIFO level below threshold. */
-	IX_SSP_BUSY, /**< SSP is busy. */
-	IX_SSP_IDLE, /**< SSP is idle. */
-	IX_SSP_OVERRUN_OCCURRED, /**<
-					SSP has experienced an overrun. */
-	IX_SSP_NO_OVERRUN, /**<
-					SSP did not experience an overrun. */
-	IX_SSP_NOT_SUPORTED, /**< hardware does not support SSP */
-	IX_SSP_NOT_INIT, /**< SSP Access not intialized */
-	IX_SSP_NULL_POINTER /**< parameter passed in is NULL */
-} IX_SSP_STATUS;
-
-/**
- * @ingroup IxSspAcc
- *
- * @brief SSP Rx FIFO Overrun handler
- *
- * This function is called for the client to handle Rx FIFO Overrun that occurs
- * in the SSP hardware
- */
-typedef void (*RxFIFOOverrunHandler)(void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @brief SSP Rx FIFO Threshold hit or above handler
- *
- * This function is called for the client to handle Rx FIFO threshold hit or
- * or above that occurs in the SSP hardware
- */
-typedef void (*RxFIFOThresholdHandler)(void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @brief SSP Tx FIFO Threshold hit or below handler
- *
- * This function is called for the client to handle Tx FIFO threshold hit or
- * or below that occurs in the SSP hardware
- */
-typedef void (*TxFIFOThresholdHandler)(void);
-
-
-/*
- * Section for struct
- */
-/**
- * @ingroup IxSspAcc
- *
- * @brief contains all the variables required to initialize the SSP serial port
- *		hardware.
- * 
- * Structure to be filled and used for calling initialization
- */
-typedef struct
-{
-	IxSspAccFrameFormat FrameFormatSelected;/**<Select between SPI, SSP and
-												Microwire. */
-	IxSspAccDataSize DataSizeSelected;		/**<Select between 4 and 16. */
-	IxSspAccClkSource ClkSourceSelected;	/**<Select clock source to be
-												on-chip or external. */
-	IxSspAccFifoThreshold TxFIFOThresholdSelected;
-											/**<Select Tx FIFO threshold
-												between 1 to 16. */
-	IxSspAccFifoThreshold RxFIFOThresholdSelected;
-											/**<Select Rx FIFO threshold
-												between 1 to 16. */
-	BOOL RxFIFOIntrEnable;					/**<Enable/disable Rx FIFO
-												threshold interrupt. Disabling
-												this interrupt will require
-												the use of the polling function
-												RxFIFOExceedThresholdCheck. */
-	BOOL TxFIFOIntrEnable;					/**<Enable/disable Tx FIFO
-												threshold interrupt. Disabling
-												this interrupt will require
-												the use of the polling function
-												TxFIFOExceedThresholdCheck. */
-	RxFIFOThresholdHandler RxFIFOThsldHdlr;	/**<Pointer to function to handle
-												a Rx FIFO interrupt. */
-	TxFIFOThresholdHandler TxFIFOThsldHdlr;	/**<Pointer to function to handle
-												a Tx FIFO interrupt. */
-	RxFIFOOverrunHandler RxFIFOOverrunHdlr;	/**<Pointer to function to handle
-												a Rx FIFO overrun interrupt. */
-	BOOL LoopbackEnable;					/**<Select operation mode to be
-												normal or loopback mode. */
-	IxSspAccSpiSclkPhase SpiSclkPhaseSelected;
-											/**<Select SPI SCLK phase to start
-												with one inactive cycle and end
-												with 1/2 inactive cycle or
-												start with 1/2 inactive cycle
-												and end with one inactive
-												cycle. (Only used in
-												SPI format). */
-	IxSspAccSpiSclkPolarity SpiSclkPolaritySelected;
-											/**<Select SPI SCLK idle state
-												to be low or high. (Only used in
-												SPI format). */
-	IxSspAccMicrowireCtlWord MicrowireCtlWordSelected;
-											/**<Select Microwire control
-												format to be 8 or 16-bit. (Only
-												used in Microwire format). */
-	UINT8 SerialClkRateSelected;			/**<Select between 0 (1.8432Mbps)
-												and 255 (7.2Kbps). The
-												formula used is	Bit rate = 
-												3.6864x10^6 / 
-												(2 x (SerialClkRateSelect + 1))
-												*/
-} IxSspInitVars;
-
-/**
- * @ingroup IxSspAcc
- *
- * @brief contains counters of the SSP statistics
- * 
- * Structure contains all values of counters and associated overflows.
- */
-typedef struct
-{
-	UINT32 ixSspRcvCounter;		/**<Total frames received. */
-	UINT32 ixSspXmitCounter;	/**<Total frames transmitted. */
-	UINT32 ixSspOverflowCounter;/**<Total occurrences of overflow. */
-} IxSspAccStatsCounters;
-
-
-/*
- * Section for prototypes interface functions
- */
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccInit (
-	IxSspInitVars *initVarsSelected);
- *
- * @brief Initializes the SSP Access module.
- *
- * @param "IxSspAccInitVars [in] *initVarsSelected" - struct containing required
- *			variables for initialization 
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will initialize the SSP Serial Port hardware to the user specified
- * configuration. Then it will enable the SSP Serial Port.
- * *NOTE*: Once interrupt or polling mode is selected, the mode cannot be
- * changed via the interrupt enable/disable function but the init needs to be
- * called again to change it.
- *
- * @return 
- *      - IX_SSP_SUCCESS - Successfully initialize and enable the SSP
- *									serial port.
- *		- IX_SSP_RX_FIFO_HANDLER_MISSING - interrupt mode is selected but RX FIFO
- *									handler pointer is NULL
- *		- IX_SSP_TX_FIFO_HANDLER_MISSING - interrupt mode is selected but TX FIFO
- *									handler pointer is NULL
- *		- IX_SSP_RX_FIFO_OVERRUN_HANDLER_MISSING - interrupt mode is selected but
- *									RX FIFO Overrun handler pointer is NULL
- *		- IX_SSP_RX_FIFO_NOT_EMPTY - Rx FIFO not empty, data size change is not
- *			                        allowed.
- *		- IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not
- *			                        allowed.
- *		- IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE - frame format selected is invalid
- *		- IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE - data size selected is invalid
- *		- IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE - clock source selected is invalid
- *		- IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE - Tx FIFO threshold level
- *									selected is invalid
- *		- IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE - Rx FIFO threshold level
- *									selected is invalid
- *		- IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE - SPI phase selected is invalid
- *		- IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE - SPI polarity selected is invalid
- *		- IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE - microwire control command
- *									size is invalid
- *      - IX_SSP_INT_UNBIND_FAIL - interrupt handler failed to unbind SSP interrupt
- *		- IX_SSP_INT_BIND_FAIL - interrupt handler failed to bind to SSP interrupt
- *									hardware trigger
- *      - IX_SSP_NOT_SUPORTED - hardware does not support SSP
- *      - IX_SSP_NULL_POINTER - parameter passed in is NULL
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccInit (IxSspInitVars *initVarsSelected);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccUninit (
-	void)
- *
- * @brief Un-initializes the SSP Serial Port Access component
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will disable the SSP Serial Port hardware. The client can call the
- * init function again if they wish to enable the SSP.
- *
- * @return 
- *      - IX_SSP_SUCCESS - successfully uninit SSP component
- *      - IX_SSP_INT_UNBIND_FAIL - interrupt handler failed to unbind SSP interrupt
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccUninit (void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccFIFODataSubmit (
-	UINT16 *data,
-	UINT32 amtOfData)
- *
- * @brief Inserts data into the SSP Serial Port's FIFO
- *
- * @param	"UINT16 [in] *data" - pointer to the location to transmit the data
- *				from
- *			"UINT32 [in] amtOfData" - number of data to be transmitted.
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will insert the amount of data specified by "amtOfData" from buffer
- * pointed to by "data" into the FIFO to be transmitted by the hardware.
- *
- * @return 
- *      - IX_SSP_SUCCESS - Data inserted successfully into FIFO
- *		- IX_SSP_FAIL - FIFO insufficient space
- *		- IX_SSP_NULL_POINTER - data pointer passed by client is NULL
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccFIFODataSubmit (
-	UINT16* data,
-	UINT32 amtOfData);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccFIFODataReceive (
-	UINT16 *data,
-	UINT32 amtOfData)
- *
- * @brief Extract data from the SSP Serial Port's FIFO
- *
- * @param	"UINT16 [in] *data" - pointer to the location to receive the data into
- *			"UINT32 [in] amtOfData" - number of data to be received.
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will extract the amount of data specified by "amtOfData" from the
- * FIFO already received by the hardware into the buffer pointed to by "data".
- *
- * @return 
- *      - IX_SSP_SUCCESS - Data extracted successfully from FIFO
- *		- IX_SSP_FAIL - FIFO has no data
- *		- IX_SSP_NULL_POINTER - data pointer passed by client is NULL
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccFIFODataReceive (
-	UINT16* data,
-	UINT32 amtOfData);
-
-
-/**
- * Polling Functions
- */
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccTxFIFOHitOrBelowThresholdCheck (
-		void)
- *
- * @brief Check if the Tx FIFO threshold has been hit or fallen below.
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will return whether the Tx FIFO threshold has been exceeded or not
- *
- * @return 
- *      - IX_SSP_TX_FIFO_HIT_BELOW_THRESHOLD - Tx FIFO level hit or below threshold .
- *		- IX_SSP_TX_FIFO_EXCEED_THRESHOLD - Tx FIFO level exceeded threshold.
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccTxFIFOHitOrBelowThresholdCheck (
-	void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccRxFIFOHitOrAboveThresholdCheck (
-		void)
- *
- * @brief Check if the Rx FIFO threshold has been hit or exceeded.
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will return whether the Rx FIFO level is below threshold or not
- *
- * @return 
- *      - IX_SSP_RX_FIFO_HIT_ABOVE_THRESHOLD - Rx FIFO level hit or exceeded threshold
- *		- IX_SSP_RX_FIFO_BELOW_THRESHOLD - Rx FIFO level below threshold
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccRxFIFOHitOrAboveThresholdCheck (
-	void);
-
-
-/**
- * Configuration functions
- *
- * NOTE: These configurations are not required to be called once init is called
- * unless configurations need to be changed on the fly.
- */
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccSSPPortStatusSet (
-	IxSspAccPortStatus portStatusSelected)
- *
- * @brief Enables/disables the SSP Serial Port hardware.
- *
- * @param "IxSspAccPortStatus [in] portStatusSelected" - Set the SSP port to
- *			enable or disable
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will enable/disable the SSP Serial Port hardware.
- * NOTE: This function is called by init to enable the SSP after setting up the
- * configurations and by uninit to disable the SSP.
- *
- * @return 
- *      - IX_SSP_SUCCESS - Port status set with valid enum value
- *		- IX_SSP_FAIL - invalid enum value
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccSSPPortStatusSet (
-	IxSspAccPortStatus portStatusSelected);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccFrameFormatSelect (
-	IxSspAccFrameFormat frameFormatSelected)
- *
- * @brief Sets the frame format for the SSP Serial Port hardware
- *
- * @param "IxSspAccFrameFormat [in] frameFormatSelected" - The frame format of
- *			SPI, SSP or Microwire can be selected as the format
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will set the format for the transfers via user input.
- * *NOTE*: The SSP hardware will be disabled to clear the FIFOs. Then its
- * previous state (enabled/disabled) restored after changing the format.
- *
- * @return 
- *      - IX_SSP_SUCCESS - frame format set with valid enum value
- *		- IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE - invalid frame format value
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccFrameFormatSelect (
-	IxSspAccFrameFormat frameFormatSelected);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccDataSizeSelect (
-	IxSspAccDataSize dataSizeSelected)
- *
- * @brief Sets the data size for transfers
- *
- * @param "IxSspAccDataSize [in] dataSizeSelected" - The data size between 4
- *			and 16 that can be selected for data transfers
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will set the data size for the transfers via user input. It will
- * disallow the change of the data size if either of the Rx/Tx FIFO is not
- * empty to prevent data loss.
- * *NOTE*: The SSP port will be disabled if the FIFOs are found to be empty and
- *			if between the check and disabling of the SSP (which clears the
- *			FIFOs) data is received into the FIFO, it might be lost.
- * *NOTE*: The FIFOs can be cleared by disabling the SSP Port if necessary to
- *			force the data size change.
- *
- * @return 
- *      - IX_SSP_SUCCESS - data size set with valid enum value
- *		- IX_SSP_RX_FIFO_NOT_EMPTY - Rx FIFO not empty, data size change is not
- *							allowed.
- *		- IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not
- *							allowed.
- *		- IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE - invalid enum value
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccDataSizeSelect (
-	IxSspAccDataSize dataSizeSelected);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccClockSourceSelect(
-	IxSspAccClkSource clkSourceSelected)
- *
- * @brief Sets the clock source of the SSP Serial Port hardware
- *
- * @param "IxSspAccClkSource [in] clkSourceSelected" - The clock source from
- *			either external source on on-chip can be selected as the source
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will set the clock source for the transfers via user input.
- *
- * @return 
- *      - IX_SSP_SUCCESS - clock source set with valid enum value
- *		- IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE - invalid enum value
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccClockSourceSelect (
-	IxSspAccClkSource clkSourceSelected);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccSerialClockRateConfigure (
-	UINT8 serialClockRateSelected)
- *
- * @brief Sets the on-chip Serial Clock Rate of the SSP Serial Port hardware.
- *
- * @param "UINT8 [in] serialClockRateSelected" - The serial clock rate that can
- *			be set is between 7.2Kbps and 1.8432Mbps. The formula used is
- *			Bit rate = 3.6864x10^6 / (2 x (SerialClockRateSelected + 1))
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will set the serial clock rate for the transfers via user input.
- *
- * @return 
- *      - IX_SSP_SUCCESS - Serial clock rate configured successfully
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccSerialClockRateConfigure (
-	UINT8 serialClockRateSelected);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccRxFIFOIntEnable (
-	RxFIFOThresholdHandler rxFIFOIntrHandler)
- *
- * @brief Enables service request interrupt whenever the Rx FIFO hits its
- *		threshold
- *
- * @param "void [in] *rxFIFOIntrHandler(UINT32)" - function pointer to the
- *				interrupt handler for the Rx FIFO exceeded.
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will enable the service request interrupt for the Rx FIFO
- *
- * @return 
- *      - IX_SSP_SUCCESS - Rx FIFO level interrupt enabled successfully
- *		- IX_SSP_RX_FIFO_HANDLER_MISSING - missing handler for Rx FIFO level interrupt
- *		- IX_SSP_POLL_MODE_BLOCKING - poll mode is selected at init, interrupt not
- *				allowed to be enabled. Use init to enable interrupt mode.
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccRxFIFOIntEnable (
-	RxFIFOThresholdHandler rxFIFOIntrHandler);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccRxFIFOIntDisable (
-	void)
- *
- * @brief Disables service request interrupt of the Rx FIFO.
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will disable the service request interrupt of the Rx FIFO.
- *
- * @return 
- *		- IX_SSP_SUCCESS - Rx FIFO Interrupt disabled successfully
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccRxFIFOIntDisable (
-	void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccTxFIFOIntEnable (
-	TxFIFOThresholdHandler txFIFOIntrHandler)
- *
- * @brief Enables service request interrupt of the Tx FIFO.
- *
- * @param "void [in] *txFIFOIntrHandler(UINT32)" - function pointer to the
- *				interrupt handler for the Tx FIFO exceeded.
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will enable the service request interrupt of the Tx FIFO.
- *
- * @return 
- *      - IX_SSP_SUCCESS - Tx FIFO level interrupt enabled successfully
- *		- IX_SSP_TX_FIFO_HANDLER_MISSING - missing handler for Tx FIFO level interrupt
- *		- IX_SSP_POLL_MODE_BLOCKING - poll mode is selected at init, interrupt not
- *				allowed to be enabled. Use init to enable interrupt mode.
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccTxFIFOIntEnable (
-	TxFIFOThresholdHandler txFIFOIntrHandler);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccTxFIFOIntDisable (
-	void)
- *
- * @brief Disables service request interrupt of the Tx FIFO
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will disable the service request interrupt of the Tx FIFO
- *
- * @return 
- *		- IX_SSP_SUCCESS - Tx FIFO Interrupt disabled successfuly.
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccTxFIFOIntDisable (
-	void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccLoopbackEnable (
-	BOOL loopbackEnable)
- *
- * @brief Enables/disables the loopback mode
- *
- * @param "BOOL [in] loopbackEnable" - true to enable and false to disable.
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will set the mode of operation to either loopback or normal mode
- * according to the user input.
- *
- * @return 
- *		- IX_SSP_SUCCESS - Loopback enabled successfully
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccLoopbackEnable (
-	BOOL loopbackEnable);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccSpiSclkPolaritySet (
-	IxSspAccSpiSclkPolarity spiSclkPolaritySelected)
- *
- * @brief Sets the SPI SCLK Polarity to Low or High
- *
- * @param - "IxSspAccSpiSclkPolarity [in] spiSclkPolaritySelected" - SPI SCLK
- *				polarity that can be selected to either high or low
- *
- * Global Data	:
- *		- None.
- *                        
- * This API is only used for the SPI frame format and will set the SPI SCLK polarity
- * to either low or high
- *
- * @return 
- *      - IX_SSP_SUCCESS - SPI Sclk polarity set with valid enum value
- *		- IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE - invalid SPI polarity value
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccSpiSclkPolaritySet (
-	IxSspAccSpiSclkPolarity spiSclkPolaritySelected);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccSpiSclkPhaseSet (
-	IxSspAccSpiSclkPhase spiSclkPhaseSelected)
- *
- * @brief Sets the SPI SCLK Phase
- *
- * @param "IxSspAccSpiSclkPhase [in] spiSclkPhaseSelected" - Phase of either
- *			the SCLK is inactive one cycle at the start of a frame and 1/2
- *			cycle at the end of a frame, OR
- *			the SCLK is inactive 1/2 cycle at the start of a frame and one
- *			cycle at the end of a frame.
- *
- * Global Data	:
- *		- IX_SSP_SUCCESS - SPI Sclk phase set with valid enum value
- *		- IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE - invalid SPI phase value
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *                        
- * This API is only used for the SPI frame format and will set the SPI SCLK
- * phase according to user input.
- *
- * @return 
- *      - None
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccSpiSclkPhaseSet (
-	IxSspAccSpiSclkPhase spiSclkPhaseSelected);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccMicrowireControlWordSet (
-	IxSspAccMicrowireCtlWord microwireCtlWordSelected)
- *
- * @brief Sets the Microwire control word to 8 or 16 bit format
- *
- * @param "IxSspAccMicrowireCtlWord [in] microwireCtlWordSelected" - Microwire
- *			control word format can be either 8 or 16 bit format
- *
- * Global Data	:
- *		- None.
- *                        
- * This API is only used for the Microwire frame format and will set the
- * control word to 8 or 16 bit format
- *
- * @return 
- *      - IX_SSP_SUCCESS - Microwire Control Word set with valid enum value
- *		- IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not
- *							allowed.
- *		- IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE - invalid enum value
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccMicrowireControlWordSet (
-	IxSspAccMicrowireCtlWord microwireCtlWordSelected);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccTxFIFOThresholdSet (
-	IxSspAccFifoThreshold txFIFOThresholdSelected)
- *
- * @brief Sets the Tx FIFO Threshold.
- *
- * @param "IxSspAccFifoThreshold [in] txFIFOThresholdSelected" - Threshold that
- *		is set for a Tx FIFO service request to be triggered
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will set the threshold for a Tx FIFO threshold to be triggered
- *
- * @return 
- *      - IX_SSP_SUCCESS - Tx FIFO Threshold set with valid enum value
- *		- IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE - invalid enum value
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccTxFIFOThresholdSet (
-	IxSspAccFifoThreshold txFIFOThresholdSelected);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccRxFIFOThresholdSet (
-	IxSspAccFifoThreshold rxFIFOThresholdSelected)
- *
- * @brief Sets the Rx FIFO Threshold.
- *
- * @param "IxSspAccFifoThreshold [in] rxFIFOThresholdSelected" - Threshold that
- *		is set for a Tx FIFO service request to be triggered
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will will set the threshold for a Rx FIFO threshold to be triggered
- *
- * @return 
- *      - IX_SSP_SUCCESS - Rx FIFO Threshold set with valid enum value
- *		- IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE - invalid enum value
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccRxFIFOThresholdSet (
-	IxSspAccFifoThreshold rxFIFOThresholdSelected);
-
-
-/**
- * Debug functions
- */
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccStatsGet (
-	IxSspAccStatsCounters *sspStats)
- *
- * @brief Returns the SSP Statistics through the pointer passed in
- *
- * @param "IxSspAccStatsCounters [in] *sspStats" - SSP statistics counter will
- *			be read and written to the location pointed by this pointer.
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will return the statistics counters of the SSP transfers.
- *
- * @return 
- *      - IX_SSP_SUCCESS - Stats obtained into the pointer provided successfully
- *		- IX_SSP_FAIL - client provided pointer is NULL
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccStatsGet (
-	IxSspAccStatsCounters *sspStats);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccStatsReset (
-	void)
- *
- * @brief Resets the SSP Statistics
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will reset the SSP statistics counters.
- *
- * @return 
- *      - None
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC void
-ixSspAccStatsReset (
-	void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccShow (
-		void)
- *
- * @brief Display SSP status registers and statistics counters.
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will display the status registers of the SSP and the statistics
- * counters.
- *
- * @return 
- *		- IX_SSP_SUCCESS - SSP show called successfully.
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccShow (
-	void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccSSPBusyCheck (
-		void)
- *
- * @brief Determine the state of the SSP serial port hardware.
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will return the state of the SSP serial port hardware - busy or
- * idle
- *
- * @return 
- *      - IX_SSP_BUSY - SSP is busy
- *		- IX_SSP_IDLE - SSP is idle.
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccSSPBusyCheck (
-	void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccTxFIFOLevelGet (
-		void)
- *
- * @brief Obtain the Tx FIFO's level
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will return the level of the Tx FIFO
- *
- * @return 
- *      - 0..16; 0 can also mean SSP not initialized and will need to be init.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC UINT8
-ixSspAccTxFIFOLevelGet (
-	void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccRxFIFOLevelGet (
-		void)
- *
- * @brief Obtain the Rx FIFO's level
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will return the level of the Rx FIFO
- *
- * @return 
- *      - 0..16; 0 can also mean SSP not initialized and will need to be init.
- *              
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC UINT8
-ixSspAccRxFIFOLevelGet (
-	void);
-
-/**
- * @ingroup IxSspAcc
- * 
- * @fn ixSspAccRxFIFOOverrunCheck (
-		void)
- *
- * @brief Check if the Rx FIFO has overrun its FIFOs
- *
- * @param - None
- *
- * Global Data	:
- *		- None.
- *                        
- * This API will return whether the Rx FIFO has overrun its 16 FIFOs
- *
- * @return 
- *      - IX_SSP_OVERRUN_OCCURRED - Rx FIFO overrun occurred
- *		- IX_SSP_NO_OVERRUN - Rx FIFO did not overrun
- *		- IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called.
- *
- * @li   Reentrant    : yes
- * @li   ISR Callable : yes
- *
- */
-PUBLIC IX_SSP_STATUS
-ixSspAccRxFIFOOverrunCheck (
-	void);
-
-#endif /* __ixp46X */
-#endif /* IXSSPACC_H */
diff --git a/drivers/net/npe/include/IxTimeSyncAcc.h b/drivers/net/npe/include/IxTimeSyncAcc.h
deleted file mode 100644
index f8bcffe..0000000
--- a/drivers/net/npe/include/IxTimeSyncAcc.h
+++ /dev/null
@@ -1,759 +0,0 @@
-/**
- * @file IxTimeSyncAcc.h
- *
- * @author Intel Corporation
- * @date 07 May 2004
- *
- * @brief  Header file for IXP400 Access Layer to IEEE 1588(TM) Precision
- * Clock Synchronisation Protocol Hardware Assist
- *
- * @version 1
- *
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxTimeSyncAcc IXP400 Time Sync Access Component API 
- *
- * @brief Public API for IxTimeSyncAcc
- *
- * @{
- */
-#ifndef IXTIMESYNCACC_H
-#define IXTIMESYNCACC_H
-
-#ifdef  __ixp46X
-
-#include "IxOsal.h"
-
-/**
- * Section for enum
- */
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @enum IxTimeSyncAccStatus
- *
- * @brief The status as returned from the API
- */
-typedef enum /**< IxTimeSyncAccStatus */
-{
-    IX_TIMESYNCACC_SUCCESS = IX_SUCCESS,    /**< Requested operation successful */
-    IX_TIMESYNCACC_INVALIDPARAM,            /**< An invalid parameter was passed */
-    IX_TIMESYNCACC_NOTIMESTAMP,             /**< While polling no time stamp available */
-    IX_TIMESYNCACC_INTERRUPTMODEINUSE,      /**< Polling not allowed while operating in interrupt mode */
-    IX_TIMESYNCACC_FAILED                   /**< Internal error occurred */
-}IxTimeSyncAccStatus;
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @enum IxTimeSyncAccAuxMode
- *
- * @brief Master or Slave Auxiliary Time Stamp (Snap Shot)
- */
-typedef enum /**< IxTimeSyncAccAuxMode */
-{
-    IX_TIMESYNCACC_AUXMODE_MASTER,          /**< Auxiliary Master Mode */
-    IX_TIMESYNCACC_AUXMODE_SLAVE,           /**< Auxiliary Slave Mode */
-    IX_TIMESYNCACC_AUXMODE_INVALID          /**< Invalid Auxiliary Mode */
-}IxTimeSyncAccAuxMode;
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @enum IxTimeSyncAcc1588PTPPort
- *
- * @brief IEEE 1588 PTP Communication Port(Channel)
- */
-typedef enum /**< IxTimeSyncAcc1588PTPPort */
-{
-    IX_TIMESYNCACC_NPE_A_1588PTP_PORT,      /**< PTP Communication Port on NPE-A */
-    IX_TIMESYNCACC_NPE_B_1588PTP_PORT,      /**< PTP Communication Port on NPE-B */
-    IX_TIMESYNCACC_NPE_C_1588PTP_PORT,      /**< PTP Communication Port on NPE-C */
-    IX_TIMESYNCACC_NPE_1588PORT_INVALID     /**< Invalid PTP Communication Port */
-} IxTimeSyncAcc1588PTPPort;
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @enum IxTimeSyncAcc1588PTPPortMode
- *
- * @brief Master or Slave mode for IEEE 1588 PTP Communication Port
- */
-typedef enum  /**< IxTimeSyncAcc1588PTPPortMode */
-{
-    IX_TIMESYNCACC_1588PTP_PORT_MASTER,       /**< PTP Communication Port in Master Mode */
-    IX_TIMESYNCACC_1588PTP_PORT_SLAVE,        /**< PTP Communication Port in Slave Mode */
-    IX_TIMESYNCACC_1588PTP_PORT_ANYMODE,      /**< PTP Communication Port in ANY Mode
-                                                  allows time stamping of all messages
-                                                  including non-1588 PTP */
-    IX_TIMESYNCACC_1588PTP_PORT_MODE_INVALID  /**< Invalid PTP Port Mode */
-}IxTimeSyncAcc1588PTPPortMode;
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @enum IxTimeSyncAcc1588PTPMsgType
- *
- * @brief 1588 PTP Messages types that can be detected on communication port
- *
- * Note that client code can determine this based on master/slave mode in which
- * it is already operating in and this information is made available for the sake
- * of convenience only.
- */
-typedef enum  /**< IxTimeSyncAcc1588PTPMsgType */
-{
-    IX_TIMESYNCACC_1588PTP_MSGTYPE_SYNC,     /**< PTP Sync message sent by Master or received by Slave */
-    IX_TIMESYNCACC_1588PTP_MSGTYPE_DELAYREQ, /**< PTP Delay_Req message sent by Slave or received by Master */
-    IX_TIMESYNCACC_1588PTP_MSGTYPE_UNKNOWN   /**< Other PTP and non-PTP message sent or received by both
-                                                Master and/or Slave */
-} IxTimeSyncAcc1588PTPMsgType;
-
-/**
- * Section for struct
- */
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccTimeValue
- *
- * @brief Struct to hold 64 bit SystemTime and TimeStamp values
- */
-typedef struct  /**< IxTimeSyncAccTimeValue */
-{
-    UINT32 timeValueLowWord;               /**< Lower 32 bits of the time value */
-    UINT32 timeValueHighWord;              /**< Upper 32 bits of the time value */  
-} IxTimeSyncAccTimeValue;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccUuid
- *
- * @brief Struct to hold 48 bit UUID values captured in Sync or Delay_Req messages
- */
-typedef struct  /**< IxTimeSyncAccUuid */
-{
-    UINT32 uuidValueLowWord;               /**<The lower 32 bits of the UUID */
-    UINT16 uuidValueHighHalfword;          /**<The upper 16 bits of the UUID */  
-} IxTimeSyncAccUuid;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccPtpMsgData
- *
- * @brief Struct for data from the PTP message returned when TimeStamp available
- */
-typedef struct  /**< IxTimeSyncAccPtpMsgData */
-{
-    IxTimeSyncAcc1588PTPMsgType ptpMsgType; /**< PTP Messages type */
-    IxTimeSyncAccTimeValue ptpTimeStamp;    /**< 64 bit TimeStamp value from PTP Message */
-    IxTimeSyncAccUuid ptpUuid;              /**< 48 bit UUID value from the PTP Message */
-    UINT16 ptpSequenceNumber;               /**< 16 bit Sequence Number from PTP Message */
-} IxTimeSyncAccPtpMsgData;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @struct IxTimeSyncAccStats
- *
- * @brief Statistics for the PTP messages
- */
-typedef struct  /**< IxTimeSyncAccStats */
-{
-    UINT32 rxMsgs; /**< Count of timestamps for received PTP Messages */
-    UINT32 txMsgs; /**< Count of timestamps for transmitted PTP Messages */
-} IxTimeSyncAccStats;
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @typedef IxTimeSyncAccTargetTimeCallback
- *
- * @brief Callback for use by target time stamp interrupt
- */
-typedef void (*IxTimeSyncAccTargetTimeCallback)(IxTimeSyncAccTimeValue targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @typedef IxTimeSyncAccAuxTimeCallback
- *
- * @brief Callback for use by auxiliary time interrupts
- */
-typedef void (*IxTimeSyncAccAuxTimeCallback)(IxTimeSyncAccAuxMode auxMode,
-             IxTimeSyncAccTimeValue auxTime);
-
-/*
- * Section for prototypes interface functions
- */
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPPortConfigSet(
-                               IxTimeSyncAcc1588PTPPort ptpPort,
-                               IxTimeSyncAcc1588PTPPortMode ptpPortMode)
- *
- * @brief Configures the IEEE 1588 message detect on particular PTP port.
- *
- * @param ptpPort [in] - PTP port to config
- * @param ptpPortMode [in]- Port to operate in Master or Slave mode
- *
- * This API will enable the time stamping on a particular PTP port.
- *          
- * @li Re-entrant   : No
- * @li ISR Callable : No
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPPortConfigSet(IxTimeSyncAcc1588PTPPort ptpPort,
-       IxTimeSyncAcc1588PTPPortMode ptpPortMode);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPPortConfigGet(
-                               IxTimeSyncAcc1588PTPPort ptpPort,
-                               IxTimeSyncAcc1588PTPPortMode *ptpPortMode)
- *
- * @brief Retrieves IEEE 1588 PTP operation mode on particular PTP port.
- *
- * @param ptpPort [in] - PTP port
- * @param ptpPortMode [in]- Mode of operation of PTP port (Master or Slave)
- *
- * This API will identify the time stamping capability of a PTP port by means
- * of obtaining its mode of operation.
- *          
- * @li Re-entrant   : No
- * @li ISR Callable : No
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPPortConfigGet(IxTimeSyncAcc1588PTPPort ptpPort,
-    IxTimeSyncAcc1588PTPPortMode *ptpPortMode);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPRxPoll(
-                               IxTimeSyncAcc1588PTPPort ptpPort,
-                               IxTimeSyncAccPtpMsgData  *ptpMsgData)
- *
- * @brief Polls the IEEE 1588 message/time stamp detect status on a particular 
- * PTP Port on the Receive side.
- *
- * @param ptpPort [in] - PTP port to poll
- * @param ptpMsgData [out] - Current TimeStamp and other Data
- *
- * This API will poll for the availability of a time stamp on the received Sync 
- * (Slave) or Delay_Req (Master) messages.
- * The client application will provide the buffer.
- *              
- * @li Re-entrant   : No
- * @li ISR Callable : No
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_NOTIMESTAMP - No time stamp available
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPRxPoll(IxTimeSyncAcc1588PTPPort ptpPort,
-    IxTimeSyncAccPtpMsgData  *ptpMsgData);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPTxPoll(
-                               IxTimeSyncAcc1588PTPPort ptpPort,
-                               IxTimeSyncAccPtpMsgData  *ptpMsgData)
- *
- *
- * @brief Polls the IEEE 1588 message/time stamp detect status on a particular 
- * PTP Port on the Transmit side.
- *
- * @param ptpPort [in] - PTP port to poll
- * @param ptpMsgData [out] - Current TimeStamp and other Data
- *                        
- * This API will poll for the availability of a time stamp on the transmitted
- * Sync (Master) or Delay_Req (Slave) messages.
- * The client application will provide the buffer.
- *              
- * @li Re-entrant   : No
- * @li ISR Callable : No
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_NOTIMESTAMP - No time stamp available
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccPTPTxPoll(IxTimeSyncAcc1588PTPPort ptpPort,
-    IxTimeSyncAccPtpMsgData  *ptpMsgData);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccSystemTimeSet(
-                               IxTimeSyncAccTimeValue systemTime)
- *
- * @brief Sets the System Time in the IEEE 1588 hardware assist block
- *
- * @param systemTime [in] - Value to set System Time
- *                        
- * This API will set the SystemTime to given value.
- *              
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccSystemTimeSet(IxTimeSyncAccTimeValue systemTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccSystemTimeGet(
-                               IxTimeSyncAccTimeValue *systemTime)
- *
- * @brief Gets the System Time from the IEEE 1588 hardware assist block
- *
- * @param systemTime [out] - Copy the current System Time into the client 
- * application provided buffer
- *
- * This API will get the SystemTime from IEEE1588 block and return to client
- *      
- * @li Re-entrant   : no
- * @li ISR Callable : no
- * 
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccSystemTimeGet(IxTimeSyncAccTimeValue *systemTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTickRateSet(
-                               UINT32 tickRate)
- *
- * @brief Sets the Tick Rate (Frequency Scaling Value) in the IEEE 1588
- * hardware assist block
- *
- * @param tickRate [in] - Value to set Tick Rate
- *                        
- * This API will set the Tick Rate (Frequency Scaling Value) in the IEEE
- * 1588 block to the given value. The Accumulator register (not client 
- * visible) is incremented by this TickRate value every clock cycle. When 
- * the Accumulator overflows, the SystemTime is incremented by one. This
- * TickValue can therefore be used to adjust the system timer.
- *           
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTickRateSet(UINT32 tickRate);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTickRateGet(
-                               UINT32 *tickRate)
- *
- * @brief Gets the Tick Rate (Frequency Scaling Value) from the IEEE 1588
- * hardware assist block
- *
- * @param tickRate [out] - Current Tick Rate value in the IEEE 1588 block
- *
- * This API will get the TickRate on IEE15588 block. Refer to @ref 
- * ixTimeSyncAccTickRateSet for notes on usage of this value.
- *         
- * @li   Reentrant    : yes
- * @li   ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTickRateGet(UINT32 *tickRate);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeInterruptEnable(
-                               IxTimeSyncAccTargetTimeCallback targetTimeCallback)
- *
- * @brief Enables the interrupt to verify the condition where the System Time 
- * greater or equal to the Target Time in the IEEE 1588 hardware assist block. 
- * If the condition is true an interrupt will be sent to XScale.
- *
- * @param targetTimeCallback [in] - Callback to be invoked when interrupt fires
- *
- * This API will enable the Target Time reached/hit condition interrupt.
- *
- * NOTE: The client application needs to ensure that the APIs 
- * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
- * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive 
- * manner with respect to each other.
- *
- * @li Re-entrant   : no
- * @li ISR Callable : yes
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeInterruptEnable(IxTimeSyncAccTargetTimeCallback targetTimeCallback);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeInterruptDisable(
-                               void)
- *
- * @brief Disables the interrupt for the condition explained in the function
- * description of @ref ixTimeSyncAccTargetTimeInterruptEnable.
- *
- * This API will disable the Target Time interrupt.
- *
- * NOTE: The client application needs to ensure that the APIs 
- * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
- * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive 
- * manner with respect to each other.
- *              
- * @li Re-entrant   : no
- * @li ISR Callable : yes
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeInterruptDisable(void);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimePoll(
-                               BOOL *ttmPollFlag,
-                               IxTimeSyncAccTimeValue *targetTime)
- *
- * @brief Poll to verify the condition where the System Time greater or equal to
- * the Target Time in the IEEE 1588 hardware assist block. If the condition is
- * true an event flag is set in the hardware.
- *
- * @param ttmPollFlag [out] - true  if the target time reached/hit condition event set
- *                            false if the target time reached/hit condition event is
-                                    not set
- * @param targetTime [out] - Capture current targetTime into client provided buffer
- *
- * Poll the target time reached/hit condition status. Return true and the current
- * target time value, if the condition is true else return false.
- *
- * NOTE: The client application will need to clear the event flag that will be set
- * as long as the condition that the System Time greater or equal to the Target Time is
- * valid, in one of the following ways:
- *     1) Invoke the API to change the target time
- *     2) Change the system timer value 
- *              
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- *         @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimePoll(BOOL *ttmPollFlag,
-    IxTimeSyncAccTimeValue *targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeSet(
-                               IxTimeSyncAccTimeValue targetTime)
- *
- * @brief Sets the Target Time in the IEEE 1588 hardware assist block
- *
- * @param targetTime [in] - Value to set Target Time
- *                        
- * This API will set the Target Time to a given value.
- *
- * NOTE: The client application needs to ensure that the APIs 
- * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and
- * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive 
- * manner with respect to each other.
- *              
- * @li   Reentrant    : no
- * @li   ISR Callable : yes
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeSet(IxTimeSyncAccTimeValue targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeGet(
-                               IxTimeSyncAccTimeValue *targetTime)
- *
- * @brief Gets the Target Time in the IEEE 1588 hardware assist block
- *
- * @param targetTime [out] - Copy current time to client provided buffer
- *                                                 
- * This API will get the Target Time from IEEE 1588 block and return to the 
- * client application
- *            
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccTargetTimeGet(IxTimeSyncAccTimeValue *targetTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptEnable(
-                               IxTimeSyncAccAuxMode auxMode, 
-                               IxTimeSyncAccAuxTimeCallback auxTimeCallback)
- *
- * @brief Enables the interrupt notification for the given mode of Auxiliary Time 
- * Stamp in the IEEE 1588 hardware assist block
- * 
- * @param auxMode [in] - Auxiliary time stamp register (slave or master) to use
- * @param auxTimeCallback [in] - Callback to be invoked when interrupt fires 
- *                                                              
- * This API will enable the Auxiliary Master/Slave Time stamp Interrupt.
- *
- * <pre>
- * NOTE: 1) An individual callback is to be registered for each Slave and Master 
- * Auxiliary Time Stamp registers. Thus to register for both Master and Slave time
- * stamp interrupts either the same callback or two separate callbacks the API has
- * to be invoked twice.
- *       2) On the IXDP465 Development Platform, the Auxiliary Timestamp signal for 
- * slave mode is tied to GPIO 8 pin. This signal is software routed by default to 
- * PCI for backwards compatibility with the IXDP425 Development Platform. This
- * routing must be disabled for the auxiliary slave time stamp register to work 
- * properly. The following commands may be used to accomplish this. However, refer
- * to the IXDP465 Development Platform Users Guide or the BSP/LSP documentation for
- * more specific information.
- *
- * For Linux (at the Redboot prompt i.e., before loading zImage):
- *     mfill -b 0x54100000 -1 -l 1 -p 8
- *     mfill -b 0x54100001 -1 -l 1 -p 0x7f
- * For vxWorks, at the prompt:
- *     intDisable(25)
- *     ixdp400FpgaIODetach(8)
- * </pre>
- *              
- * @li Re-entrant   : no
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback or
-                                            invalid auxiliary snapshot mode
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccAuxTimeInterruptEnable(IxTimeSyncAccAuxMode auxMode,
-    IxTimeSyncAccAuxTimeCallback auxTimeCallback);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptDisable(
-                               IxTimeSyncAccAuxMode auxMode)
- *
- * @brief Disables the interrupt for the indicated mode of Auxiliary Time Stamp
- * in the IEEE 1588 hardware assist block
- *
- * @param auxMode [in] - Auxiliary time stamp mode (slave or master) using which
- * the interrupt will be disabled.
- *                        
- * This API will disable the Auxiliary Time Stamp Interrupt (Master or Slave)
- *              
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccAuxTimeInterruptDisable(IxTimeSyncAccAuxMode auxMode);
-
-/**
- * @ingroup IxTimeSyncAcc
- * 
- * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimePoll(
-                               IxTimeSyncAccAuxMode auxMode,
-                               BOOL *auxPollFlag,
-                               IxTimeSyncAccTimeValue *auxTime)
- *
- * @brief Poll for the Auxiliary Time Stamp captured for the mode indicated 
- * (Master or Slave)
- *
- * @param auxMode [in] - Auxiliary Snapshot Register (Slave or Master) to be checked
- * @param auxPollFlag [out] - true if the time stamp captured in auxiliary
-                                   snapshot register
- *                            false if the time stamp not captured in
-                                   auxiliary snapshot register
- * @param auxTime [out] - Copy the current Auxiliary Snapshot Register value into the
- * client provided buffer
- *
- * Polls for the Time stamp in the appropriate Auxiliary Snapshot Registers based 
- * on the mode specified. Return true and the contents of the Auxiliary snapshot,
- * if it is available else return false.
- * 
- * Please refer to the note #2 of the API @ref ixTimeSyncAccAuxTimeInterruptEnable
- * for more information for Auxiliary Slave mode.
- *
- * @li Re-entrant   : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for auxPollFlag,
-                   callback or invalid auxiliary snapshot mode
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- *         @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccAuxTimePoll(IxTimeSyncAccAuxMode auxMode,
-    BOOL *auxPollFlag,
-    IxTimeSyncAccTimeValue *auxTime);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccReset(void)
- *
- * @brief Resets the IEEE 1588 hardware assist block
- *
- * Sets the reset bit in the IEEE1588 silicon which fully resets the silicon block
- *            
- * @li Reentrant    : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED  - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccReset(void);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccStatsGet(IxTimeSyncAccStats
-                               *timeSyncStats)
- *
- * @brief Returns the IxTimeSyncAcc Statistics in the client supplied buffer
- *
- * @param timeSyncStats [out] - TimeSync statistics counter values
- *
- * This API will return the statistics of the received or transmitted messages.
- * 
- * NOTE: 1) These counters are updated only when the client polls for the time 
- * stamps or interrupt are enabled. This is because the IxTimeSyncAcc module 
- * does not either transmit or receive messages and does only run the code 
- * when explicit requests received by client application.
- *
- *       2) These statistics reflect the number of valid PTP messages exchanged
- * in Master and Slave modes but includes all the messages (including valid 
- * non-PTP messages) while operating in the Any mode.
- *              
- * @li Reentrant    : no
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_INVALIDPARAM - NULL parameter passed
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccStatsGet(IxTimeSyncAccStats *timeSyncStats);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn void ixTimeSyncAccStatsReset(void)
- *
- * @brief Reset Time Sync statistics
- *
- * This API will reset the statistics counters of the TimeSync access layer.
- *             
- * @li Reentrant    : yes
- * @li ISR Callable:  no
- *
- * @return @li None
- */
-PUBLIC void
-ixTimeSyncAccStatsReset(void);
-
-/**
- * @ingroup IxTimeSyncAcc
- *
- * @fn IxTimeSyncAccStatus ixTimeSyncAccShow(void)
- *
- * @brief Displays the Time Sync current status
- *
- * This API will display status on the current configuration of the IEEE
- * 1588 hardware assist block, contents of the various time stamp registers,
- * outstanding interrupts and/or events.
- *
- * Note that this is intended for debug only, and in contrast to the other
- * functions, it does not clear the any of the status bits associated with
- * active timestamps and so is passive in its nature.
- *            
- * @li Reentrant    : yes
- * @li ISR Callable : no
- *
- * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful
- *         @li IX_TIMESYNCACC_FAILED - Internal error occurred
- */
-PUBLIC IxTimeSyncAccStatus
-ixTimeSyncAccShow(void);
-
-#endif /* __ixp46X */
-#endif /* IXTIMESYNCACC_H */
-
-/**
- * @} defgroup IxTimeSyncAcc
- */
-
diff --git a/drivers/net/npe/include/IxTimerCtrl.h b/drivers/net/npe/include/IxTimerCtrl.h
deleted file mode 100644
index a865b93..0000000
--- a/drivers/net/npe/include/IxTimerCtrl.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/** 
- * @file IxTimerCtrl.h
- * @brief 
- *    This is the header file for the Timer Control component.
- *
- *    The timer callback control component provides a mechanism by which different 
- *    client components can start a timer and have a supplied callback function
- *    invoked when the timer expires.
- *    The callbacks are all dispatched from one thread inside this component. 
- *    Any component that needs to be called periodically should use this facility 
- *    rather than create its own task with a sleep loop. 
- *
- * @par
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxTimerCtrl IXP400 Timer Control (IxTimerCtrl) API
- *
- * @brief The public API for the IXP400 Timer Control Component.
- *
- * @{
- */
-
-#ifndef IxTimerCtrl_H
-#define IxTimerCtrl_H
-
-
-#include "IxTypes.h"
-/* #include "Ossl.h" */
-
-/*
- * #defines and macros used in this file.
- */
-
-/**
- * @ingroup IxTimerCtrl
- *
- * @def IX_TIMERCTRL_NO_FREE_TIMERS
- *
- * @brief Timer schedule return code.
- *
- * Indicates that the request to start a timer failed because
- * all available timer resources are used. 
- */
-#define IX_TIMERCTRL_NO_FREE_TIMERS 2
-
-
-/**
- * @ingroup IxTimerCtrl
- *
- * @def IX_TIMERCTRL_PARAM_ERROR
- *
- * @brief Timer schedule return code.
- *
- * Indicates that the request to start a timer failed because
- * the client has supplied invalid parameters.
- */
-#define IX_TIMERCTRL_PARAM_ERROR 3
-
- 
-/*
- * Typedefs whose scope is limited to this file.
- */
-
-/**
- * @ingroup IxTimerCtrl
- *
- * @brief A typedef for a pointer to a timer callback function. 
- * @para void * - This parameter is supplied by the client when the
- * timer is started and passed back to the client in the callback.
- * @note in general timer callback functions should not block or 
- * take longer than 100ms. This constraint is required to ensure that
- * higher priority callbacks are not held up. 
- * All callbacks are called from the same thread. 
- * This thread is a shared resource. 
- * The parameter passed is provided when the timer is scheduled.
- */
-typedef void (*IxTimerCtrlTimerCallback)(void *userParam);
-
-
-/**
- * @ingroup IxTimerCtrl
- *
- * @brief List used to identify the users of timers.
- * @note The order in this list indicates priority.  Components appearing 
- * higher in the list will be given priority over components lower in the
- * list.  When adding components, please insert at an appropriate position
- * for priority ( i.e values should be less than IxTimerCtrlMaxPurpose ) .
- */
-typedef enum 
-{
-    IxTimerCtrlAdslPurpose,
-   /* Insert new purposes above this line only
-    */
-   IxTimerCtrlMaxPurpose
-}
-IxTimerCtrlPurpose;
-
-
-/*
- * Function definition
- */
-
-/**
- * @ingroup IxTimerCtrl
- *
- * @fn ixTimerCtrlSchedule(IxTimerCtrlTimerCallback func, 
-                       void *userParam, 
-                       IxTimerCtrlPurpose purpose,
-	               UINT32 relativeTime,
-                       unsigned *timerId )
- * 
- * @brief Schedules a callback function to be called after a period of "time".
- * The callback function should not block or run for more than 100ms.
- * This function 
- *
- * @param func @ref IxTimerCtrlTimerCallback [in] - the callback function to be called.
- * @param userParam void [in] - a parameter to send to the callback function, can be NULL.
- * @param purpose @ref IxTimerCtrlPurpose [in] - the purpose of the callback, internally this component will 
- * decide the priority of callbacks with different purpose.
- * @param relativeTime UINT32 [in] - time relative to now in milliseconds after which the callback 
- * will be called. The time must be greater than the duration of one OS tick.
- * @param *timerId unsigned [out] -  An id for the callback scheduled. 
- * This id can be used to cancel the callback.
- * @return 
- * @li IX_SUCCESS - The timer was started successfully.
- * @li IX_TIMERCTRL_NO_FREE_TIMERS - The timer was not started because the maximum number
- * of running timers has been exceeded.
- * @li IX_TIMERCTRL_PARAM_ERROR - The timer was not started because the client has supplied 
- * a NULL callback func, or the requested timeout is less than one OS tick.
- * @note  This function is re-entrant. The function accesses a list of running timers
- * and may suspend the calling thread if this list is being accesed by another thread.
- */
-PUBLIC IX_STATUS 
-ixTimerCtrlSchedule(IxTimerCtrlTimerCallback func, 
-                       void *userParam, 
-                       IxTimerCtrlPurpose purpose,
-	               UINT32 relativeTime,
-                       unsigned *timerId );
-
-
-/**
- * @ingroup IxTimerCtrl
- *
- * @fn ixTimerCtrlScheduleRepeating(IxTimerCtrlTimerCallback func, 
-                                void *param, 
-                                IxTimerCtrlPurpose purpose,
-			        UINT32 interval,
-                                unsigned *timerId )
- * 
- * @brief Schedules a callback function to be called after a period of "time".
- * The callback function should not block or run for more than 100ms.
- *
- * @param func @ref IxTimerCtrlTimerCallback [in] - the callback function to be called.
- * @param userParam void [in] - a parameter to send to the callback function, can be NULL.
- * @param purpose @ref IxTimerCtrlPurpose [in] - the purpose of the callback, internally this component will 
- * decide the priority of callbacks with different purpose.
- * @param interval UINT32 [in] - the interval in milliseconds between calls to func. 
- * @param timerId unsigned [out] - An id for the callback scheduled. 
- * This id can be used to cancel the callback.
- * @return 
- * @li IX_SUCCESS - The timer was started successfully.
- * @li IX_TIMERCTRL_NO_FREE_TIMERS - The timer was not started because the maximum number
- * of running timers has been exceeded.
- * @li IX_TIMERCTRL_PARAM_ERROR - The timer was not started because the client has supplied 
- * a NULL callback func, or the requested timeout is less than one OS tick.
- * @note  This function is re-entrant. The function accesses a list of running timers
- * and may suspend the calling thread if this list is being accesed by another thread.
- */
-PUBLIC IX_STATUS 
-ixTimerCtrlScheduleRepeating(IxTimerCtrlTimerCallback func, 
-                                void *param, 
-                                IxTimerCtrlPurpose purpose,
-			        UINT32 interval,
-                                unsigned *timerId );
-
-/**
- * @ingroup IxTimerCtrl
- *
- * @fn ixTimerCtrlCancel (unsigned id)
- *
- * @brief Cancels a scheduled callback.
- *
- * @param id unsigned [in] - the id of the callback to be cancelled.
- * @return
- * @li IX_SUCCESS - The timer was successfully stopped.
- * @li IX_FAIL - The id parameter did not corrrespond to any running timer..
- * @note This function is re-entrant. The function accesses a list of running timers
- * and may suspend the calling thread if this list is being accesed by another thread.
- */
-PUBLIC IX_STATUS
-ixTimerCtrlCancel (unsigned id);
-
-/**
- * @ingroup IxTimerCtrl
- *
- * @fn ixTimerCtrlInit(void)
- *
- * @brief Initialise the Timer Control Component.
- * @return 
- * @li IX_SUCCESS - The timer control component initialized successfully.
- * @li IX_FAIL - The timer control component initialization failed,
- * or the component was already initialized.
- * @note This must be done before any other API function is called.
- * This function should be called once only and is not re-entrant.
- */
-PUBLIC IX_STATUS
-ixTimerCtrlInit(void);
-
-
-/**
- * @ingroup IxTimerCtrl
- *
- * @fn ixTimerCtrlShow( void )
- *
- * @brief Display the status of the Timer Control Component. 
- * @return void
- * @note Displays a list of running timers.
- * This function is not re-entrant. This function does not suspend the calling thread.
- */
-PUBLIC void
-ixTimerCtrlShow( void );
-
-#endif  /* IXTIMERCTRL_H */
-
diff --git a/drivers/net/npe/include/IxTypes.h b/drivers/net/npe/include/IxTypes.h
deleted file mode 100644
index f936a50..0000000
--- a/drivers/net/npe/include/IxTypes.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/**
- * @file IxTypes.h (Replaced by OSAL)
- *
- * @date 28-NOV-2001
-
- * @brief This file contains basic types used by the IXP400 software
- *
- * Design Notes:
- *    This file shall only include fundamental types and definitions to be
- *    shared by all the IXP400 components.
- *    Please DO NOT add component-specific types here.
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxTypes IXP400 Types (IxTypes) 
- *
- * @brief Basic data types used by the IXP400 project
- *
- * @{
- */
-
-#ifndef IxTypes_H
-
-#ifndef __doxygen_HIDE
-
-#define IxTypes_H
-
-#endif /* __doxygen_HIDE */
-
-
-/* WR51880: Undefined data types workaround for backward compatibility */
-#ifdef __linux
-#ifndef __INCvxTypesOldh
-typedef int (*FUNCPTR)(void);
-typedef int STATUS;
-#define OK (0)
-#define ERROR (-1)
-#endif
-#endif
-
-#include "IxOsalBackward.h"
-
-#endif /* IxTypes_H */
-
-/**
- * @} addtogroup IxTypes
- */
diff --git a/drivers/net/npe/include/IxUART.h b/drivers/net/npe/include/IxUART.h
deleted file mode 100644
index ff23b22..0000000
--- a/drivers/net/npe/include/IxUART.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/** 
- * @file IxUART.h
- *
- * @date 12-OCT-01
- *
- * @brief Public header for the Intel IXP400 internal UART, generic driver.
- * 
- * Design Notes:
- * This driver allows you to perform the following functions: 
- *	Device Initialization,
- *	send/receive characters.
- *
- * Perform Uart IOCTL for the following:
- *	Set/Get the current baud rate,
- *	set parity,
- *	set the number of Stop bits,
- *	set the character Length (5,6,7,8),
- *	enable/disable Hardware flow control.
- *
- * Only Polled mode is supported for now.
- *    
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
-*/
-
-/**
- * @defgroup IxUARTAccAPI IXP400 UART Access (IxUARTAcc) API
- *
- * @brief IXP400 UARTAcc Driver Public API
- * 
- * @{
- */
-
-
-/* Defaults */
-
-/**
- * @defgroup DefaultDefines Defines for Default Values
- *
- * @brief Default values which can be used for UART configuration
- *
- * @sa ixUARTDev
- */
-
-/**
- * @def IX_UART_DEF_OPTS
- *
- * @brief The default hardware options to set the UART to -
- * no flow control, 8 bit word, 1 stop bit, no parity 
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_DEF_OPTS (CLOCAL | CS8)
-
-/**
- * @def IX_UART_DEF_XMIT
- *
- * @brief The default UART FIFO size - must be no bigger than 64
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_DEF_XMIT 64
-
-/**
- * @def IX_UART_DEF_BAUD
- *
- * @brief The default UART baud rate - 9600
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_DEF_BAUD 9600
-
-/**
- * @def IX_UART_MIN_BAUD
- *
- * @brief The minimum UART baud rate - 9600
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_MIN_BAUD 9600
-
-/**
- * @def IX_UART_MAX_BAUD
- *
- * @brief The maximum UART baud rate - 926100
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_MAX_BAUD 926100
-
-/**
- * @def IX_UART_XTAL
- *
- * @brief The UART clock speed
- *
- * @ingroup DefaultDefines
- */
-#define IX_UART_XTAL 14745600
-
-
-
-/* IOCTL commands (Request codes) */
-
-/**
- * @defgroup IoctlCommandDefines Defines for IOCTL Commands
- *
- * @brief IOCTL Commands (Request codes) which can be used
- *        with @ref ixUARTIoctl
- */
-
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_BAUD_SET
- *
- * @brief Set the baud rate
- */
-#define IX_BAUD_SET	0
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_BAUD_GET
- *
- * @brief Get the baud rate
- */
-#define IX_BAUD_GET	1
-
-/**
- * @ingroup IoctlCommandDefines
- * @def IX_MODE_SET
- * @brief Set the UART mode of operation
- */
-#define IX_MODE_SET	2
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_MODE_GET
- *
- * @brief Get the current UART mode of operation
- */
-#define IX_MODE_GET	3
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_OPTS_SET
- *
- * @brief Set the UART device options
- */
-#define IX_OPTS_SET	4
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_OPTS_GET
- *
- * @brief Get the UART device options
- */
-#define IX_OPTS_GET	5
-
-/**
- * @ingroup IoctlCommandDefines
- *
- * @def IX_STATS_GET
- *
- * @brief Get the UART statistics
- */
-#define IX_STATS_GET	6
-
-
-/* POSIX style ioctl arguments */
-
-/**
- * @defgroup IoctlArgDefines Defines for IOCTL Arguments
- *
- * @brief POSIX style IOCTL arguments which can be used
- *        with @ref ixUARTIoctl
- *
- * @sa ixUARTMode
- */
-
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CLOCAL
- *
- * @brief Software flow control
- */
-#ifdef CLOCAL
-#undef CLOCAL
-#endif
-#define CLOCAL		0x1
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CREAD
- *
- * @brief Enable interrupt receiver
- */
-#ifdef CREAD
-#undef CREAD
-#endif
-#define CREAD		0x2
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CSIZE
- *
- * @brief Characters size
- */
-#ifdef CSIZE
-#undef CSIZE
-#endif
-#define CSIZE		0xc
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CS5
- *
- * @brief 5 bits
- */
-#ifdef CS5
-#undef CS5
-#endif
-#define CS5		0x0
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CS6
- *
- * @brief 6 bits
- */
-#ifdef CS6
-#undef CS6
-#endif
-#define CS6		0x4
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CS7
- *
- * @brief 7 bits
- */
-#ifdef CS7
-#undef CS7
-#endif
-#define CS7		0x8
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def CS8
- *
- * @brief 8 bits
- */
-#ifdef CS8
-#undef CS8
-#endif
-#define CS8		0xc
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def STOPB
- *
- * @brief Send two stop bits (else one)
- */
-#define STOPB		0x20
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def PARENB
- *
- * @brief Parity detection enabled (else disabled)
- */
-#ifdef PARENB
-#undef PARENB
-#endif
-#define PARENB		0x40
-
-/**
- * @ingroup IoctlArgDefines
- *
- * @def PARODD
- *
- * @brief Odd parity  (else even)
- */
-#ifdef PARODD
-#undef PARODD
-#endif
-#define PARODD		0x80
-
-/**
- * @enum ixUARTMode
- * @brief The mode to set to UART to.
- */
-typedef enum
-{
-    INTERRUPT=0,	/**< Interrupt mode */
-    POLLED,		/**< Polled mode */
-    LOOPBACK		/**< Loopback mode */
-} ixUARTMode;
-
-/**
- * @struct ixUARTStats
- * @brief Statistics for the UART.
- */
-typedef struct
-{
-    UINT32  rxCount;
-    UINT32  txCount;	
-    UINT32  overrunErr;
-    UINT32  parityErr;
-    UINT32  framingErr;
-    UINT32  breakErr;
-} ixUARTStats;
-
-/**
- * @struct ixUARTDev
- * @brief Device descriptor for the UART.
- */
-typedef struct
-{
-    UINT8 *addr;	/**< device base address */
-    ixUARTMode mode;	/**< interrupt, polled or loopback */
-    int baudRate;	/**< baud rate */
-    int freq;		/**< UART clock frequency */     
-    int options;	/**< hardware options */
-    int fifoSize;	/**< FIFO xmit size */
-
-    ixUARTStats   stats;	/**< device statistics */
-} ixUARTDev;
-
-/**
- * @ingroup IxUARTAccAPI
- *
- * @fn IX_STATUS ixUARTInit(ixUARTDev* pUART)
- * 
- * @param pUART	@ref ixUARTDev [in] - pointer to UART structure describing our device.
- * 
- * @brief Initialise the UART. This puts the chip in a quiescent state.
- * 
- * @pre The base address for the UART must contain a valid value.
- *      Also the baud rate and hardware options must contain sensible values
- *      otherwise the defaults will be used as defined in ixUART.h
- *
- * @post UART is initialized and ready to send and receive data.
- *
- * @note This function should only be called once per device.
- *
- * @retval IX_SUCCESS - UART device successfully initialised.
- * @retval IX_FAIL - Critical error, device not initialised.
- ***************************************************************************/
-PUBLIC IX_STATUS ixUARTInit(ixUARTDev* pUART);
-
-/**
- * @ingroup IxUARTAccAPI
- *
- * @fn IX_STATUS ixUARTPollOutput(ixUARTDev* pUART, int outChar)
- *
- * @param pUART @ref ixUARTDev [out] - pointer to UART structure describing our device.
- * @param outChar int [out] - character to transmit.
- *
- * @brief Transmit a character in polled mode.
- *
- * @pre UART device must be initialised.
- *
- * @retval IX_SUCCESS - character was successfully transmitted.
- * @retval IX_FAIL - output buffer is full (try again).
- ***************************************************************************/
-PUBLIC IX_STATUS ixUARTPollOutput(ixUARTDev* pUART, int outChar);
-
-/**
- * @ingroup IxUARTAccAPI
- *
- * @fn IX_STATUS ixUARTPollInput(ixUARTDev* pUART, char *inChar)
- *
- * @param pUART	@ref ixUARTDev [in] - pointer to UART structure describing our device.
- * @param *inChar char [in] - character read from the device.
- *
- * @brief Receive a character in polled mode.
- *
- * @pre UART device must be initialised.
- *
- * @retval IX_SUCCESS - character was successfully read.
- * @retval IX_FAIL - input buffer empty (try again).
- ***************************************************************************/
-PUBLIC IX_STATUS ixUARTPollInput(ixUARTDev* pUART, char *inChar);
-
-/**
- * @ingroup IxUARTAccAPI
- *
- * @fn IX_STATUS ixUARTIoctl(ixUARTDev* pUART, int cmd, void* arg)
- *
- * @param pUART	@ref ixUARTDev [in] - pointer to UART structure describing our device.
- * @param cmd int [in] - an ioctl request code.
- * @param arg void* [in] - optional argument used to set the device mode,
- *	 baud rate, and hardware options.
- *
- * @brief Perform I/O control routines on the device.
- *
- * @retval IX_SUCCESS - requested feature was set/read successfully.
- * @retval IX_FAIL - error setting/reading the requested feature.
- *
- * @sa IoctlCommandDefines
- * @sa IoctlArgDefines
- ***************************************************************************/    
-PUBLIC IX_STATUS ixUARTIoctl(ixUARTDev* pUART, int cmd, void* arg);
-
-/**
- * @} defgroup IxUARTAcc
- */
diff --git a/drivers/net/npe/include/IxVersionId.h b/drivers/net/npe/include/IxVersionId.h
deleted file mode 100644
index 1769dcd..0000000
--- a/drivers/net/npe/include/IxVersionId.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/**
- * @file IxVersionId.h
- *
- * @date 22-Aug-2002
- *
- * @brief This file contains the IXP400 Software version identifier
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- */
-
-/**
- * @defgroup IxVersionId IXP400 Version ID (IxVersionId)
- *
- * @brief Version Identifiers
- *
- * @{
- */
-
-#ifndef IXVERSIONID_H
-#define IXVERSIONID_H
-
-/**
- * @brief Version Identifier String
- *
- * This string will be updated with each customer release of the IXP400
- * Software.
- */
-#define IX_VERSION_ID "2_0"
-
-/**
- * This string will be updated with each customer release of the IXP400
- * ADSL driver package.
- */
-#define IX_VERSION_ADSL_ID "1_12"
-
-
-/**
- * This string will be updated with each customer release of the IXP400
- * USB Client driver package.
- */
-#define IX_VERSION_USBRNDIS_ID "1_9"
-
-/**
- * This string will be updated with each customer release of the IXP400
- * I2C Linux driver package.
- */
-#define IX_VERSION_I2C_LINUX_ID "1_0"
-
-/**
- * @brief Linux Ethernet Driver Patch Version Identifier String
- *
- * This string will be updated with each release of Linux Ethernet Patch
- */
-#define LINUX_ETHERNET_DRIVER_PATCH_ID "1_4"
-
-/**
- * @brief Linux Integration Patch Version Identifier String
- *
- * This String will be updated with each release of Linux Integration Patch
- */
-#define LINUX_INTEGRATION_PATCH_ID "1_3"
-
-/**
- * @brief Linux Ethernet Readme version Identifier String
- *
- * This string will be updated with each release of Linux Ethernet Readme
- */
-#define LINUX_ETHERNET_README_ID "1_3"
-
-/**
- * @brief Linux Integration Readme version Identifier String
- *
- * This string will be updated with each release of Linux Integration Readme
- */
-
-#define LINUX_INTEGRATION_README_ID "1_3"
-
-/**
- * @brief Linux I2C driver Readme version Identifier String
- *
- * This string will be updated with each release of Linux I2C Driver Readme
- */
-#define LINUX_I2C_DRIVER_README_ID "1_0"
-
-/**
- * @brief ixp425_eth_update_nf_bridge.patch version Identifier String
- *
- * This string will be updated with each release of ixp425_eth_update_nf_bridge.
-patch
- *
- */
-
-#define IXP425_ETH_UPDATE_NF_BRIDGE_ID "1_3"
-
-/**
- * @brief Internal Release Identifier String
- *
- * This string will be updated with each internal release (SQA drop)
- * of the IXP400 Software.
- */
-#define IX_VERSION_INTERNAL_ID "SQA3_5"
-
-/**
- * @brief Compatible Tornado Version Identifier
- */
-#define IX_VERSION_COMPATIBLE_TORNADO "Tornado2_2_1-PNE2_0"
-
-/**
- * @brief Compatible Linux Version Identifier
- */
-#define IX_VERSION_COMPATIBLE_LINUX "MVL3_1"
-
-
-#endif /* IXVERSIONID_H */
-
-/**
- * @} addtogroup IxVersionId
- */
diff --git a/drivers/net/npe/include/ix_error.h b/drivers/net/npe/include/ix_error.h
deleted file mode 100644
index 4c59999..0000000
--- a/drivers/net/npe/include/ix_error.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/**
- * ============================================================================
- * = COPYRIGHT
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- * = PRODUCT
- *      Intel(r) IXP425 Software Release
- *
- * = FILENAME
- *      ix_error.h (Replaced by OSAL)
- *
- * = DESCRIPTION
- *      This file will describe the basic error type and support functions that
- *      will be used by the IXA SDK Framework API.
- *
- * = AUTHOR
- *      Intel Corporation
- *
- * = CHANGE HISTORY
- *      4/22/2002 4:19:03 PM - creation time 
- * ============================================================================
- */
-
-#if !defined(__IX_ERROR_H__)
-#define __IX_ERROR_H__
-
-#include "IxOsalBackward.h"
-
-#endif /* end !defined(__IX_ERROR_H__) */
-
diff --git a/drivers/net/npe/include/ix_macros.h b/drivers/net/npe/include/ix_macros.h
deleted file mode 100644
index b4cf760..0000000
--- a/drivers/net/npe/include/ix_macros.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/**
- * ============================================================================
- * = COPYRIGHT
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- * = PRODUCT
- *      Intel(r) IXP425 Software Release
- *
- * = FILENAME
- *      ix_macros.h
- *
- * = DESCRIPTION
- *      This file will define the basic preprocessor macros that are going to be used
- *      the IXA SDK Framework API.
- *
- * = AUTHOR
- *      Intel Corporation
- *
- * = CHANGE HISTORY
- *      4/22/2002 4:41:05 PM - creation time 
- * ============================================================================
- */
-
-#if !defined(__IX_MACROS_H__)
-#define __IX_MACROS_H__
-
-
-#if defined(__cplusplus)
-extern "C"
-{
-#endif /* end defined(__cplusplus) */
-
-
-/**
- * MACRO NAME: IX_BIT_FIELD_MASK16
- *
- * DESCRIPTION: Builds the mask required to extract the bit field from a 16 bit unsigned integer value.
- *
- * @Param:  - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant
- *          bit of the bit field.
- * @Param:  - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant
- *          bit of the bit field.
- *
- * @Return: Returns a 16 bit mask that will extract the bit field from a 16 bit unsigned integer value.
- */
-#define IX_BIT_FIELD_MASK16( \
-                             arg_FieldLSBBit, \
-                             arg_FieldMSBBit \
-                            ) \
-                            ((ix_bit_mask16)((((ix_uint16)1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - \
-                            (ix_uint16)1) << arg_FieldLSBBit))
-
-
-
-/**
- * MACRO NAME: IX_GET_BIT_FIELD16
- *
- * DESCRIPTION: Extracts a bit field from 16 bit unsigned integer. The returned value is normalized in
- *          in the sense that will be right aligned.
- *
- * @Param:  - IN arg_PackedData16 a 16 bit unsigned integer that contains the bit field of interest.
- * @Param:  - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant
- *          bit of the bit field.
- * @Param:  - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant
- *          bit of the bit field.
- *
- * @Return: Returns the value of the bit field. The value can be from 0 to (1 << (arg_FieldMSBBit + 1 -
- *          arg_FieldLSBBit)) - 1.
- */
-#define IX_GET_BIT_FIELD16( \
-                            arg_PackedData16, \
-                            arg_FieldLSBBit, \
-                            arg_FieldMSBBit \
-                          ) \
-                          (((ix_uint16)(arg_PackedData16) & IX_BIT_FIELD_MASK16(arg_FieldLSBBit, arg_FieldMSBBit)) >> \
-                             arg_FieldLSBBit)
-
-
-/**
- * MACRO NAME: IX_MAKE_BIT_FIELD16
- *
- * DESCRIPTION: This macro will create a temporary 16 bit value with the bit field
- *          desired set to the desired value.
- *
- * @Param:  - IN arg_BitFieldValue is the new value of the bit field. The value can be from 0 to 
- *          (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1.
- * @Param:  - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant
- *          bit of the bit field.
- * @Param:  - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant
- *          bit of the bit field.
- * 
- * @Return: Returns a temporary ix_uint16 value that has the bit field set to the appropriate value.
- */
-#define IX_MAKE_BIT_FIELD16( \
-                             arg_BitFieldValue, \
-                             arg_FieldLSBBit, \
-                             arg_FieldMSBBit \
-                           ) \
-                           (((ix_uint16)(arg_BitFieldValue) << arg_FieldLSBBit) & \
-                           IX_BIT_FIELD_MASK16(arg_FieldLSBBit, arg_FieldMSBBit))
-                                 
-/**
- * MACRO NAME: IX_SET_BIT_FIELD16
- *
- * DESCRIPTION: Sets a new value for a bit field from a 16 bit unsigned integer.
- *
- * @Param:  - IN arg_PackedData16 a 16 bit unsigned integer that contains the bit field of interest.
- * @Param:  - IN arg_BitFieldValue is the new vale of the bit field. The value can be from 0 to 
- *          (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1.
- * @Param:  - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant
- *          bit of the bit field.
- * @Param:  - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant
- *          bit of the bit field.
- *
- * @Return: Returns the updated value of arg_PackedData16.
- */
-#define IX_SET_BIT_FIELD16( \
-                            arg_PackedData16, \
-                            arg_BitFieldValue, \
-                            arg_FieldLSBBit, \
-                            arg_FieldMSBBit \
-                          ) \
-                          (arg_PackedData16 = (((ix_uint16)(arg_PackedData16) & \
-                          ~(IX_BIT_FIELD_MASK16(arg_FieldLSBBit, arg_FieldMSBBit))) | \
-                          IX_MAKE_BIT_FIELD16(arg_BitFieldValue, arg_FieldLSBBit, arg_FieldMSBBit))) 
-
-
-/**
- * MACRO NAME: IX_BIT_FIELD_MASK32
- *
- * DESCRIPTION: Builds the mask required to extract the bit field from a 32 bit unsigned integer value.
- *
- * @Param:  - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant
- *          bit of the bit field.
- * @Param:  - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant
- *          bit of the bit field.
- *
- * @Return: Returns a 32 bit mask that will extract the bit field from a 32 bit unsigned integer value.
- */
-#define IX_BIT_FIELD_MASK32( \
-                             arg_FieldLSBBit, \
-                             arg_FieldMSBBit \
-                           ) \
-                           ((ix_bit_mask32)((((ix_uint32)1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - \
-                           (ix_uint32)1) << arg_FieldLSBBit))
-
-
-
-/**
- * MACRO NAME: IX_GET_BIT_FIELD32
- *
- * DESCRIPTION: Extracts a bit field from 32 bit unsigned integer. The returned value is normalized in
- *          in the sense that will be right aligned.
- *
- * @Param:  - IN arg_PackedData32 a 32 bit unsigned integer that contains the bit field of interest.
- * @Param:  - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant
- *          bit of the bit field.
- * @Param:  - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant
- *          bit of the bit field.
- *
- * @Return: Returns the value of the bit field. The value can be from 0 to (1 << (arg_FieldMSBBit + 1 -
- *          arg_FieldLSBBit)) - 1.
- */
-#define IX_GET_BIT_FIELD32( \
-                            arg_PackedData32, \
-                            arg_FieldLSBBit, \
-                            arg_FieldMSBBit \
-                          ) \
-                          (((ix_uint32)(arg_PackedData32) & IX_BIT_FIELD_MASK32(arg_FieldLSBBit, arg_FieldMSBBit)) >> \
-                             arg_FieldLSBBit)
-
-
-
-
-/**
- * MACRO NAME: IX_MAKE_BIT_FIELD32
- *
- * DESCRIPTION: This macro will create a temporary 32 bit value with the bit field
- *          desired set to the desired value.
- *
- * @Param:  - IN arg_BitFieldValue is the new value of the bit field. The value can be from 0 to 
- *          (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1.
- * @Param:  - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant
- *          bit of the bit field.
- * @Param:  - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant
- *          bit of the bit field.
- * 
- * @Return: Returns a temporary ix_uint32 value that has the bit field set to the appropriate value.
- */
-#define IX_MAKE_BIT_FIELD32( \
-                             arg_BitFieldValue, \
-                             arg_FieldLSBBit, \
-                             arg_FieldMSBBit \
-                           ) \
-                           (((ix_uint32)(arg_BitFieldValue) << arg_FieldLSBBit) & \
-                           IX_BIT_FIELD_MASK32(arg_FieldLSBBit, arg_FieldMSBBit))
-                            
-                                
-/**
- * MACRO NAME: IX_SET_BIT_FIELD32
- *
- * DESCRIPTION: Sets a new value for a bit field from a 32 bit unsigned integer.
- *
- * @Param:  - IN arg_PackedData32 a 32 bit unsigned integer that contains the bit field of interest.
- * @Param:  - IN arg_BitFieldValue is the new value of the bit field. The value can be from 0 to 
- *          (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1.
- * @Param:  - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant
- *          bit of the bit field.
- * @Param:  - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant
- *          bit of the bit field.
- *
- * @Return: Returns the updated value of arg_PackedData32.
- */
-#define IX_SET_BIT_FIELD32( \
-                            arg_PackedData32, \
-                            arg_BitFieldValue, \
-                            arg_FieldLSBBit, \
-                            arg_FieldMSBBit \
-                          ) \
-                          (arg_PackedData32 = (((ix_uint32)(arg_PackedData32) & \
-                          ~(IX_BIT_FIELD_MASK32(arg_FieldLSBBit, arg_FieldMSBBit))) | \
-                          IX_MAKE_BIT_FIELD32(arg_BitFieldValue, arg_FieldLSBBit, arg_FieldMSBBit))) 
-
-
-
-#if defined(__cplusplus)
-}
-#endif /* end defined(__cplusplus) */
-
-#endif /* end !defined(__IX_MACROS_H__) */
diff --git a/drivers/net/npe/include/ix_os_type.h b/drivers/net/npe/include/ix_os_type.h
deleted file mode 100644
index e14d561..0000000
--- a/drivers/net/npe/include/ix_os_type.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/**
- * ============================================================================
- * = COPYRIGHT
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- * = PRODUCT
- *      Intel(r) IXP425 Software Release
- *
- * = FILENAME
- *      ix_os_type.h (Replaced by OSAL)
- *
- * = DESCRIPTION
- *      This file provides protable symbol definitions for the current OS type.
- *
- * = AUTHOR
- *      Intel Corporation
- *
- * = CHANGE HISTORY
- *      4/22/2002 4:43:30 PM - creation time 
- * ============================================================================
- */
-
-#if !defined(__IX_OS_TYPE_H__)
-#define __IX_OS_TYPE_H__
-
-#include "IxOsalBackward.h"
-
-#endif /* end !defined(__IX_OS_TYPE_H__) */
-
diff --git a/drivers/net/npe/include/ix_ossl.h b/drivers/net/npe/include/ix_ossl.h
deleted file mode 100644
index eaa2629..0000000
--- a/drivers/net/npe/include/ix_ossl.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/**
- * ============================================================================
- * = COPYRIGHT
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- * = PRODUCT
- *      Intel(r) IXP425 Software Release
- *
- * = LIBRARY
- *      OSSL - Operating System Services  Library
- *
- * = MODULE
- *      OSSL  Abstraction layer header file
- *
- * = FILENAME
- *       ix_ossl.h (Replaced by OSAL)
- *
- * = DESCRIPTION
- *   This file contains the prototypes of OS-independent wrapper
- *   functions which allow the programmer not to be tied to a specific
- *   operating system. The OSSL functions can be divided into three classes:
- *
- *   1) synchronization-related wrapper functions around thread system calls
- *   2) thread-related wrapper functions around thread calls
- *   3) transactor/workbench osapi calls -- defined in osApi.h
- *
- *   Both 1 and 2 classes of functions provide Thread Management, Thread 
- *   Synchronization, Mutual Exclusion and  Timer primitives. Namely, 
- *   creation and deletion functions as well as the standard "wait" and
- *   "exit". Additionally, a couple of utility functions which enable to 
- *   pause the execution of a thread are also provided.
- *
- *   The 3rd class provides a  slew of other OSAPI functions to handle
- *   Transactor/WorkBench OS calls.
- *
- *
- *   OSSL Thread APIs:
- *             The OSSL thread functions that allow for thread creation,
- *             get thread id, thread deletion and set thread priroity.
- *
- *             ix_ossl_thread_create
- *             ix_ossl_thread_get_id
- *             ix_ossl_thread_exit
- *             ix_ossl_thread_kill
- *             ix_ossl_thread_set_priority
- *             ix_ossl_thread__delay
- * 
- *   OSSL Semaphore APIs:
- *             The OSSL semaphore functions that allow for initialization,
- *             posting, waiting and deletion of semaphores.
- *
- *             ix_ossl_sem_init
- *             ix_ossl_sem_fini
- *             ix_ossl_sem_take
- *             ix_ossl_sem_give
- *             ix_ossl_sem_flush
- *
- *   OSSL Mutex APIs:
- *             The OSSL wrapper functions that allow for initialization,
- *             posting, waiting and deletion of mutexes.
- *
- *             ix_ossl_mutex_init
- *             ix_ossl_mutex_fini
- *             ix_ossl_mutex_lock
- *             ix_ossl_mutex_unlock
- *
- *   OSSL Timer APIs:
- *     	       The timer APIs provide sleep and get time functions.
- *
- *             ix_ossl_sleep
- *             ix_ossl_sleep_tick
- *             ix_ossl_time_get
- * 
- *   OSAPIs for Transactor/WorkBench:
- *             These OSAPI functions are used for transator OS calls. 
- *             They are defined in osApi.h. 
- *
- *             Sem_Init 			
- *             Sem_Destroy 		
- *             Sem_Wait 			
- *             Sem_Wait			
- *             Thread_Create		
- *             Thread_Cancel 		
- *             Thread_SetPriority 		
- *             delayMs 			
- *             delayTick			
- *             
- *
- *
- **********************************************************************
- *      
- *
- * = AUTHOR
- *      Intel Corporation
- *
- * = ACKNOWLEDGEMENTS
- *      
- *
- * = CREATION TIME
- *      1/8/2002 1:53:42 PM
- *
- * = CHANGE HISTORY
- *   02/22/2002 : Renamed osapi.h os_api.h
- *                Moved OS header file includes from OSSL.h to os_api.h
- *                Moved OS specific datatypes to os_api.h 
- *                Modified data types, macros and functions as per
- *                'C' coding guidelines.
- *
- *
- * ============================================================================
- */
-
-#ifndef _IX_OSSL_H
-#ifndef __doxygen_hide
-#define _IX_OSSL_H
-#endif /* __doxygen_hide */
-
-#include "IxOsalBackward.h"
- 
-#endif /* _IX_OSSL_H */
-
-/**
- * @} defgroup IxOSSL
- */
diff --git a/drivers/net/npe/include/ix_symbols.h b/drivers/net/npe/include/ix_symbols.h
deleted file mode 100644
index 0006b22..0000000
--- a/drivers/net/npe/include/ix_symbols.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/**
- * ============================================================================
- * = COPYRIGHT
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- * = PRODUCT
- *      Intel(r) IXP425 Software Release
- *
- * = FILENAME
- *      ix_symbols.h
- *
- * = DESCRIPTION
- *      This file declares all the global preprocessor symbols required by 
- *      the IXA SDK Framework API.
- *
- * = AUTHOR
- *      Intel Corporation
- *
- * = CHANGE HISTORY
- *      4/23/2002 10:41:13 AM - creation time 
- * ============================================================================
- */
-
-#if !defined(__IX_SYMBOLS_H__)
-#define __IX_SYMBOLS_H__
-
-
-#if defined(__cplusplus)
-extern "C"
-{
-#endif /* end defined(__cplusplus) */
-
-/**
- * The IX_EXPORT_FUNCTION symbol will be used for compilation on different platforms.
- * We are planning to provide a simulation version of the library that should work
- * with the Transactor rather than the hardware. This implementation will be done on
- * WIN32 in the form of a DLL that will need to export functions and symbols.
- */
-#if (_IX_OS_TYPE_ == _IX_OS_WIN32_)
-#    if defined(_IX_LIB_INTERFACE_IMPLEMENTATION_)
-#        define IX_EXPORT_FUNCTION __declspec( dllexport )
-#    elif defined(_IX_LIB_INTERFACE_IMPORT_DLL_)
-#        define IX_EXPORT_FUNCTION __declspec( dllimport )
-#    else
-#        define IX_EXPORT_FUNCTION extern 
-#    endif
-#elif (_IX_OS_TYPE_ == _IX_OS_WINCE_)
-#    define IX_EXPORT_FUNCTION __declspec(dllexport)
-#else
-#    define IX_EXPORT_FUNCTION  extern
-#endif
-
-
-/**
- * This symbols should be defined when we want to build for a multithreaded environment
- */
-#define _IX_MULTI_THREADED_     1
-    
-
-/**
- * This symbol should be defined in the case we to buils for a multithreaded environment
- * but we want that our modules to work as if they are used in a single threaded environment.
- */
-/* #define _IX_RM_EXPLICIT_SINGLE_THREADED_    1  */
-
-#if defined(__cplusplus)
-}
-#endif /* end defined(__cplusplus) */
-
-#endif /* end !defined(__IX_SYMBOLS_H__) */
diff --git a/drivers/net/npe/include/ix_types.h b/drivers/net/npe/include/ix_types.h
deleted file mode 100644
index 6945506..0000000
--- a/drivers/net/npe/include/ix_types.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/**
- * ============================================================================
- * = COPYRIGHT
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- * = PRODUCT
- *      Intel(r) IXP425 Software Release
- *
- * = FILENAME
- *      ix_types.h
- *
- * = DESCRIPTION
- *      This file will define generic types that will guarantee the protability
- *      between different architectures and compilers. It should be used the entire
- *      IXA SDK Framework API.
- *
- * = AUTHOR
- *      Intel Corporation
- *
- * = CHANGE HISTORY
- *      4/22/2002 4:44:17 PM - creation time 
- * ============================================================================
- */
-
-#if !defined(__IX_TYPES_H__)
-#define __IX_TYPES_H__
-
-
-#if defined(__cplusplus)
-extern "C"
-{
-#endif /* end defined(__cplusplus) */
-
-
-/**
- * Define generic integral data types that will guarantee the size.
- */
-
-/**
- * TYPENAME: ix_int8
- * 
- * DESCRIPTION: This type defines an 8 bit signed integer value.
- *
- */
-typedef signed char ix_int8;
-
-
-/**
- * TYPENAME: ix_uint8
- * 
- * DESCRIPTION: This type defines an 8 bit unsigned integer value.
- *
- */
-typedef unsigned char ix_uint8;
-
-
-/**
- * TYPENAME: ix_int16
- * 
- * DESCRIPTION: This type defines an 16 bit signed integer value.
- *
- */
-typedef signed short int ix_int16;
-
-
-/**
- * TYPENAME: ix_uint16
- * 
- * DESCRIPTION: This type defines an 16 bit unsigned integer value.
- *
- */
-typedef unsigned short int ix_uint16;
-
-
-/**
- * TYPENAME: ix_int32
- * 
- * DESCRIPTION: This type defines an 32 bit signed integer value.
- *
- */
-typedef signed int ix_int32;
-
-
-/**
- * TYPENAME: ix_uint32
- * 
- * DESCRIPTION: This type defines an 32 bit unsigned integer value.
- *
- */
-#ifndef __wince
-typedef unsigned int ix_uint32;
-#else
-typedef unsigned long ix_uint32;
-#endif
-
-/**
- * TYPENAME: ix_int64
- * 
- * DESCRIPTION: This type defines an 64 bit signed integer value.
- *
- */
-#ifndef __wince
-__extension__ typedef signed long long int ix_int64;
-#endif
-
-/**
- * TYPENAME: ix_uint64
- * 
- * DESCRIPTION: This type defines an 64 bit unsigned integer value.
- *
- */
-#ifndef __wince
-__extension__ typedef unsigned long long int ix_uint64;
-#endif
-
-
-/**
- * TYPENAME: ix_bit_mask8
- * 
- * DESCRIPTION: This is a generic type for a 8 bit mask. 
- */
-typedef ix_uint8 ix_bit_mask8;
-
-
-/**
- * TYPENAME: ix_bit_mask16
- * 
- * DESCRIPTION: This is a generic type for a 16 bit mask. 
- */
-typedef ix_uint16 ix_bit_mask16;
-
-
-/**
- * TYPENAME: ix_bit_mask32
- * 
- * DESCRIPTION: This is a generic type for a 32 bit mask. 
- */
-typedef ix_uint32 ix_bit_mask32;
-
-
-/**
- * TYPENAME: ix_bit_mask64
- * 
- * DESCRIPTION: This is a generic type for a 64 bit mask. 
- */
-#ifndef __wince
-typedef ix_uint64 ix_bit_mask64;
-#endif
-
-
-/**
- * TYPENAME: ix_handle
- * 
- * DESCRIPTION: This type defines a generic handle.
- *
- */
-typedef ix_uint32 ix_handle;
-
-
-
-/**
- * DESCRIPTION: This symbol defines a NULL handle
- *
- */
-#define IX_NULL_HANDLE   ((ix_handle)0) 
-
-
-#if defined(__cplusplus)
-}
-#endif /* end defined(__cplusplus) */
-
-#endif /* end !defined(__IX_TYPES_H__) */
diff --git a/drivers/net/npe/include/npe.h b/drivers/net/npe/include/npe.h
deleted file mode 100644
index 1c6ae26..0000000
--- a/drivers/net/npe/include/npe.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef NPE_H
-#define NPE_H
-
-/*
- * defines...
- */
-#define CONFIG_SYS_NPE_NUMS		1
-#ifdef CONFIG_HAS_ETH1
-#undef CONFIG_SYS_NPE_NUMS
-#define CONFIG_SYS_NPE_NUMS		2
-#endif
-
-#define NPE_NUM_PORTS		3
-#define ACTIVE_PORTS		1
-
-#define NPE_PKT_SIZE		1600
-
-#define CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS	64
-#define CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS	2
-
-#define NPE_MBUF_POOL_SIZE					\
-	((CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS +	\
-	  CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS) *	\
-	 sizeof(IX_OSAL_MBUF) * ACTIVE_PORTS)
-
-#define NPE_PKT_POOL_SIZE					\
-	((CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS +	\
-	  CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS) *	\
-	 NPE_PKT_SIZE * ACTIVE_PORTS)
-
-#define NPE_MEM_POOL_SIZE (NPE_MBUF_POOL_SIZE + NPE_PKT_POOL_SIZE)
-
-#define PHY_AUTONEGOTIATE_TIMEOUT 4000	/* 4000 ms autonegotiate timeout */
-
-/*
- * structs...
- */
-struct npe {
-	u8			active;           /* NPE active				*/
-	u8			eth_id;           /* IX_ETH_PORT_1 or IX_ETH_PORT_2	*/
-	u8			phy_no;           /* which PHY (0 - 31)			*/
-	u8			mac_address[6];
-
-	IX_OSAL_MBUF		*rxQHead;
-	IX_OSAL_MBUF		*txQHead;
-
-	u8			*tx_pkts;
-	u8			*rx_pkts;
-	IX_OSAL_MBUF		*rx_mbufs;
-	IX_OSAL_MBUF		*tx_mbufs;
-
-	int			print_speed;
-
-	int			rx_read;
-	int			rx_write;
-	int			rx_len[PKTBUFSRX];
-};
-
-/*
- * prototypes...
- */
-extern int npe_miiphy_read (const char *devname, unsigned char addr,
-			    unsigned char reg, unsigned short *value);
-extern int npe_miiphy_write (const char *devname, unsigned char addr,
-			     unsigned char reg, unsigned short value);
-
-#endif /* ifndef NPE_H */
diff --git a/drivers/net/npe/include/os_datatypes.h b/drivers/net/npe/include/os_datatypes.h
deleted file mode 100644
index def891b..0000000
--- a/drivers/net/npe/include/os_datatypes.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/**
- * ============================================================================
- * = COPYRIGHT
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * SPDX-License-Identifier:	BSD-3-Clause
- * @par
- * -- End of Copyright Notice --
- * = PRODUCT
- *      Intel(r) IXP425 Software Release
- *
- * = LIBRARY
- *      OSSL - Operating System Services  Library
- *
- * = MODULE
- *      OS Specific Data Types header file
- *
- * = FILENAME
- *       OSSL.h (Replaced by OSAL)
- *
- * = DESCRIPTION
- *   This file  contains definitions and encapsulations for OS specific data types. These
- *   encapsulated  data types are  used by OSSL header files and OS API functions.
- *
- *
- **********************************************************************
- *      
- *
- * = AUTHOR
- *      Intel Corporation
- *
- * = AKNOWLEDGEMENTS
- *      
- *
- * = CREATION TIME
- *      1/8/2002 1:53:42 PM
- *
- * = CHANGE HISTORY
- 
- * ============================================================================
- */
-
-#ifndef _OS_DATATYPES_H
-#define _OS_DATATYPES_H
-
-#include "IxOsalBackward.h"
-
-#endif /* _OS_DATATYPES_H */
-
diff --git a/drivers/net/npe/miiphy.c b/drivers/net/npe/miiphy.c
deleted file mode 100644
index 002fb81..0000000
--- a/drivers/net/npe/miiphy.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0	IBM-pibs
- */
-/*-----------------------------------------------------------------------------+
-  |
-  |  File Name:	 miiphy.c
-  |
-  |  Function:	 This module has utilities for accessing the MII PHY through
-  |	       the EMAC3 macro.
-  |
-  |  Author:	 Mark Wisner
-  |
-  |  Change Activity-
-  |
-  |  Date	 Description of Change					     BY
-  |  ---------	 ---------------------					     ---
-  |  05-May-99	 Created						     MKW
-  |  01-Jul-99	 Changed clock setting of sta_reg from 66MHz to 50MHz to
-  |		 better match OPB speed. Also modified delay times.	     JWB
-  |  29-Jul-99	 Added Full duplex support				     MKW
-  |  24-Aug-99	 Removed printf from dp83843_duplex()			     JWB
-  |  19-Jul-00	 Ported to esd cpci405					     sr
-  |  23-Dec-03	 Ported from miiphy.c to 440GX Travis Sawyer		     TBS
-  |		 <travis.sawyer@sandburst.com>
-  |
-  +-----------------------------------------------------------------------------*/
-
-#include <common.h>
-#include <miiphy.h>
-#include "IxOsal.h"
-#include "IxEthAcc.h"
-#include "IxEthAcc_p.h"
-#include "IxEthAccMac_p.h"
-#include "IxEthAccMii_p.h"
-
-/***********************************************************/
-/* Dump out to the screen PHY regs			   */
-/***********************************************************/
-
-void miiphy_dump (char *devname, unsigned char addr)
-{
-	unsigned long i;
-	unsigned short data;
-
-
-	for (i = 0; i < 0x1A; i++) {
-		if (miiphy_read (devname, addr, i, &data)) {
-			printf ("read error for reg %lx\n", i);
-			return;
-		}
-		printf ("Phy reg %lx ==> %4x\n", i, data);
-
-		/* jump to the next set of regs */
-		if (i == 0x07)
-			i = 0x0f;
-
-	}			/* end for loop */
-}				/* end dump */
-
-
-/***********************************************************/
-/* (Re)start autonegotiation				   */
-/***********************************************************/
-int phy_setup_aneg (char *devname, unsigned char addr)
-{
-	unsigned short ctl, adv;
-
-	/* Setup standard advertise */
-	miiphy_read (devname, addr, MII_ADVERTISE, &adv);
-	adv |= (LPA_LPACK | LPA_RFAULT | LPA_100BASE4 |
-		LPA_100FULL | LPA_100HALF | LPA_10FULL |
-		LPA_10HALF);
-	miiphy_write (devname, addr, MII_ADVERTISE, adv);
-
-	/* Start/Restart aneg */
-	miiphy_read (devname, addr, MII_BMCR, &ctl);
-	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
-	miiphy_write (devname, addr, MII_BMCR, ctl);
-
-	return 0;
-}
-
-
-int npe_miiphy_read (const char *devname, unsigned char addr,
-		     unsigned char reg, unsigned short *value)
-{
-	u16 val;
-
-	ixEthAccMiiReadRtn(addr, reg, &val);
-	*value = val;
-
-	return 0;
-}				/* phy_read */
-
-
-int npe_miiphy_write (const char *devname, unsigned char addr,
-		      unsigned char reg, unsigned short value)
-{
-	ixEthAccMiiWriteRtn(addr, reg, value);
-	return 0;
-}				/* phy_write */
diff --git a/drivers/net/npe/npe.c b/drivers/net/npe/npe.c
deleted file mode 100644
index 00b381e..0000000
--- a/drivers/net/npe/npe.c
+++ /dev/null
@@ -1,680 +0,0 @@
-/*
- * (C) Copyright 2005-2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#if 0
-#define DEBUG		/* define for debug output */
-#endif
-
-#include <config.h>
-#include <common.h>
-#include <net.h>
-#include <miiphy.h>
-#include <malloc.h>
-#include <asm/processor.h>
-#include <asm/arch-ixp/ixp425.h>
-
-#include <IxOsal.h>
-#include <IxEthAcc.h>
-#include <IxEthDB.h>
-#include <IxNpeDl.h>
-#include <IxQMgr.h>
-#include <IxNpeMh.h>
-#include <ix_ossl.h>
-#include <IxFeatureCtrl.h>
-
-#include <npe.h>
-
-static IxQMgrDispatcherFuncPtr qDispatcherFunc = NULL;
-static int npe_exists[NPE_NUM_PORTS];
-static int npe_used[NPE_NUM_PORTS];
-
-/* A little extra so we can align to cacheline. */
-static u8 npe_alloc_pool[NPE_MEM_POOL_SIZE + CONFIG_SYS_CACHELINE_SIZE - 1];
-static u8 *npe_alloc_end;
-static u8 *npe_alloc_free;
-
-static void *npe_alloc(int size)
-{
-	static int count = 0;
-	void *p = NULL;
-
-	size = (size + (CONFIG_SYS_CACHELINE_SIZE-1)) & ~(CONFIG_SYS_CACHELINE_SIZE-1);
-	count++;
-
-	if ((npe_alloc_free + size) < npe_alloc_end) {
-		p = npe_alloc_free;
-		npe_alloc_free += size;
-	} else {
-		printf("npe_alloc: failed (count=%d, size=%d)!\n", count, size);
-	}
-	return p;
-}
-
-/* Not interrupt safe! */
-static void mbuf_enqueue(IX_OSAL_MBUF **q, IX_OSAL_MBUF *new)
-{
-	IX_OSAL_MBUF *m = *q;
-
-	IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(new) = NULL;
-
-	if (m) {
-		while(IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m))
-			m = IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m);
-		IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m) = new;
-	} else
-		*q = new;
-}
-
-/* Not interrupt safe! */
-static IX_OSAL_MBUF *mbuf_dequeue(IX_OSAL_MBUF **q)
-{
-	IX_OSAL_MBUF *m = *q;
-	if (m)
-		*q = IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m);
-	return m;
-}
-
-static void reset_tx_mbufs(struct npe* p_npe)
-{
-	IX_OSAL_MBUF *m;
-	int i;
-
-	p_npe->txQHead = NULL;
-
-	for (i = 0; i < CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS; i++) {
-		m = &p_npe->tx_mbufs[i];
-
-		memset(m, 0, sizeof(*m));
-
-		IX_OSAL_MBUF_MDATA(m) = (void *)&p_npe->tx_pkts[i * NPE_PKT_SIZE];
-		IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE;
-		mbuf_enqueue(&p_npe->txQHead, m);
-	}
-}
-
-static void reset_rx_mbufs(struct npe* p_npe)
-{
-	IX_OSAL_MBUF *m;
-	int i;
-
-	p_npe->rxQHead = NULL;
-
-	HAL_DCACHE_INVALIDATE(p_npe->rx_pkts, NPE_PKT_SIZE *
-			      CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS);
-
-	for (i = 0; i < CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS; i++) {
-		m = &p_npe->rx_mbufs[i];
-
-		memset(m, 0, sizeof(*m));
-
-		IX_OSAL_MBUF_MDATA(m) = (void *)&p_npe->rx_pkts[i * NPE_PKT_SIZE];
-		IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE;
-
-		if(ixEthAccPortRxFreeReplenish(p_npe->eth_id, m) != IX_SUCCESS) {
-			printf("ixEthAccPortRxFreeReplenish failed for port %d\n", p_npe->eth_id);
-			break;
-		}
-	}
-}
-
-static void init_rx_mbufs(struct npe* p_npe)
-{
-	p_npe->rxQHead = NULL;
-
-	p_npe->rx_pkts = npe_alloc(NPE_PKT_SIZE *
-				   CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS);
-	if (p_npe->rx_pkts == NULL) {
-		printf("alloc of packets failed.\n");
-		return;
-	}
-
-	p_npe->rx_mbufs = (IX_OSAL_MBUF *)
-		npe_alloc(sizeof(IX_OSAL_MBUF) *
-			  CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS);
-	if (p_npe->rx_mbufs == NULL) {
-		printf("alloc of mbufs failed.\n");
-		return;
-	}
-
-	reset_rx_mbufs(p_npe);
-}
-
-static void init_tx_mbufs(struct npe* p_npe)
-{
-	p_npe->tx_pkts = npe_alloc(NPE_PKT_SIZE *
-				   CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS);
-	if (p_npe->tx_pkts == NULL) {
-		printf("alloc of packets failed.\n");
-		return;
-	}
-
-	p_npe->tx_mbufs = (IX_OSAL_MBUF *)
-		npe_alloc(sizeof(IX_OSAL_MBUF) *
-			  CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS);
-	if (p_npe->tx_mbufs == NULL) {
-		printf("alloc of mbufs failed.\n");
-		return;
-	}
-
-	reset_tx_mbufs(p_npe);
-}
-
-/* Convert IX_ETH_PORT_n to IX_NPEMH_NPEID_NPEx */
-static int __eth_to_npe(int eth_id)
-{
-	switch(eth_id) {
-	case IX_ETH_PORT_1:
-		return IX_NPEMH_NPEID_NPEB;
-
-	case IX_ETH_PORT_2:
-		return IX_NPEMH_NPEID_NPEC;
-
-	case IX_ETH_PORT_3:
-		return IX_NPEMH_NPEID_NPEA;
-	}
-	return 0;
-}
-
-/* Poll the CSR machinery. */
-static void npe_poll(int eth_id)
-{
-	if (qDispatcherFunc != NULL) {
-		ixNpeMhMessagesReceive(__eth_to_npe(eth_id));
-		(*qDispatcherFunc)(IX_QMGR_QUELOW_GROUP);
-	}
-}
-
-/* ethAcc RX callback */
-static void npe_rx_callback(u32 cbTag, IX_OSAL_MBUF *m, IxEthAccPortId portid)
-{
-	struct npe* p_npe = (struct npe *)cbTag;
-
-	if (IX_OSAL_MBUF_MLEN(m) > 0) {
-		mbuf_enqueue(&p_npe->rxQHead, m);
-
-		if (p_npe->rx_write == ((p_npe->rx_read-1) & (PKTBUFSRX-1))) {
-			debug("Rx overflow: rx_write=%d rx_read=%d\n",
-			      p_npe->rx_write, p_npe->rx_read);
-		} else {
-			debug("Received message #%d (len=%d)\n", p_npe->rx_write,
-			      IX_OSAL_MBUF_MLEN(m));
-			memcpy((void *)NetRxPackets[p_npe->rx_write], IX_OSAL_MBUF_MDATA(m),
-			       IX_OSAL_MBUF_MLEN(m));
-			p_npe->rx_len[p_npe->rx_write] = IX_OSAL_MBUF_MLEN(m);
-			p_npe->rx_write++;
-			if (p_npe->rx_write == PKTBUFSRX)
-				p_npe->rx_write = 0;
-
-#ifdef CONFIG_PRINT_RX_FRAMES
-			{
-				u8 *ptr = IX_OSAL_MBUF_MDATA(m);
-				int i;
-
-				for (i=0; i<60; i++) {
-					debug("%02x ", *ptr++);
-				}
-				debug("\n");
-			}
-#endif
-		}
-
-		m = mbuf_dequeue(&p_npe->rxQHead);
-	} else {
-		debug("Received frame with length 0!!!\n");
-		m = mbuf_dequeue(&p_npe->rxQHead);
-	}
-
-	/* Now return mbuf to NPE */
-	IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE;
-	IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(m) = NULL;
-	IX_OSAL_MBUF_FLAGS(m) = 0;
-
-	if(ixEthAccPortRxFreeReplenish(p_npe->eth_id, m) != IX_SUCCESS) {
-		debug("npe_rx_callback: Error returning mbuf.\n");
-	}
-}
-
-/* ethAcc TX callback */
-static void npe_tx_callback(u32 cbTag, IX_OSAL_MBUF *m)
-{
-	struct npe* p_npe = (struct npe *)cbTag;
-
-	debug("%s\n", __FUNCTION__);
-
-	IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE;
-	IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(m) = NULL;
-	IX_OSAL_MBUF_FLAGS(m) = 0;
-
-	mbuf_enqueue(&p_npe->txQHead, m);
-}
-
-
-static int npe_set_mac_address(struct eth_device *dev)
-{
-	struct npe *p_npe = (struct npe *)dev->priv;
-	IxEthAccMacAddr npeMac;
-
-	debug("%s\n", __FUNCTION__);
-
-	/* Set MAC address */
-	memcpy(npeMac.macAddress, dev->enetaddr, 6);
-
-	if (ixEthAccPortUnicastMacAddressSet(p_npe->eth_id, &npeMac) != IX_ETH_ACC_SUCCESS) {
-		printf("Error setting unicast address! %02x:%02x:%02x:%02x:%02x:%02x\n",
-		       npeMac.macAddress[0], npeMac.macAddress[1],
-		       npeMac.macAddress[2], npeMac.macAddress[3],
-		       npeMac.macAddress[4], npeMac.macAddress[5]);
-		return 0;
-	}
-
-	return 1;
-}
-
-/* Boot-time CSR library initialization. */
-static int npe_csr_load(void)
-{
-	int i;
-
-	if (ixQMgrInit() != IX_SUCCESS) {
-		debug("Error initialising queue manager!\n");
-		return 0;
-	}
-
-	ixQMgrDispatcherLoopGet(&qDispatcherFunc);
-
-	if(ixNpeMhInitialize(IX_NPEMH_NPEINTERRUPTS_YES) != IX_SUCCESS) {
-		printf("Error initialising NPE Message handler!\n");
-		return 0;
-	}
-
-	if (npe_used[IX_ETH_PORT_1] && npe_exists[IX_ETH_PORT_1] &&
-	    ixNpeDlNpeInitAndStart(IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS)
-	    != IX_SUCCESS) {
-		printf("Error downloading firmware to NPE-B!\n");
-		return 0;
-	}
-
-	if (npe_used[IX_ETH_PORT_2] && npe_exists[IX_ETH_PORT_2] &&
-	    ixNpeDlNpeInitAndStart(IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS)
-	    != IX_SUCCESS) {
-		printf("Error downloading firmware to NPE-C!\n");
-		return 0;
-	}
-
-	/* don't need this for U-Boot */
-	ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, false);
-
-	if (ixEthAccInit() != IX_ETH_ACC_SUCCESS) {
-		printf("Error initialising Ethernet access driver!\n");
-		return 0;
-	}
-
-	for (i = 0; i < IX_ETH_ACC_NUMBER_OF_PORTS; i++) {
-		if (!npe_used[i] || !npe_exists[i])
-			continue;
-		if (ixEthAccPortInit(i) != IX_ETH_ACC_SUCCESS) {
-			printf("Error initialising Ethernet port%d!\n", i);
-		}
-		if (ixEthAccTxSchedulingDisciplineSet(i, FIFO_NO_PRIORITY) != IX_ETH_ACC_SUCCESS) {
-			printf("Error setting scheduling discipline for port %d.\n", i);
-		}
-		if (ixEthAccPortRxFrameAppendFCSDisable(i) != IX_ETH_ACC_SUCCESS) {
-			printf("Error disabling RX FCS for port %d.\n", i);
-		}
-		if (ixEthAccPortTxFrameAppendFCSEnable(i) != IX_ETH_ACC_SUCCESS) {
-			printf("Error enabling TX FCS for port %d.\n", i);
-		}
-	}
-
-	return 1;
-}
-
-static int npe_init(struct eth_device *dev, bd_t * bis)
-{
-	struct npe *p_npe = (struct npe *)dev->priv;
-	int i;
-	u16 reg_short;
-	int speed;
-	int duplex;
-
-	debug("%s: 1\n", __FUNCTION__);
-
-#ifdef CONFIG_MII_NPE0_FIXEDLINK
-	if (0 == p_npe->eth_id) {
-		speed = CONFIG_MII_NPE0_SPEED;
-		duplex = CONFIG_MII_NPE0_FULLDUPLEX ? FULL : HALF;
-	} else
-#endif
-#ifdef CONFIG_MII_NPE1_FIXEDLINK
-	if (1 == p_npe->eth_id) {
-		speed = CONFIG_MII_NPE1_SPEED;
-		duplex = CONFIG_MII_NPE1_FULLDUPLEX ? FULL : HALF;
-	} else
-#endif
-	{
-		miiphy_read(dev->name, p_npe->phy_no, MII_BMSR, &reg_short);
-
-		/*
-		 * Wait if PHY is capable of autonegotiation and
-		 * autonegotiation is not complete
-		 */
-		if ((reg_short & BMSR_ANEGCAPABLE) &&
-		    !(reg_short & BMSR_ANEGCOMPLETE)) {
-			puts("Waiting for PHY auto negotiation to complete");
-			i = 0;
-			while (!(reg_short & BMSR_ANEGCOMPLETE)) {
-				/*
-				 * Timeout reached ?
-				 */
-				if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
-					puts(" TIMEOUT !\n");
-					break;
-				}
-
-				if ((i++ % 1000) == 0) {
-					putc('.');
-					miiphy_read(dev->name, p_npe->phy_no,
-						     MII_BMSR, &reg_short);
-				}
-				udelay(1000);	/* 1 ms */
-			}
-			puts(" done\n");
-			/* another 500 ms (results in faster booting) */
-			udelay(500000);
-		}
-		speed = miiphy_speed(dev->name, p_npe->phy_no);
-		duplex = miiphy_duplex(dev->name, p_npe->phy_no);
-	}
-
-	if (p_npe->print_speed) {
-		p_npe->print_speed = 0;
-		printf ("ENET Speed is %d Mbps - %s duplex connection\n",
-			(int) speed, (duplex == HALF) ? "HALF" : "FULL");
-	}
-
-	npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool);
-	npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool +
-				 CONFIG_SYS_CACHELINE_SIZE - 1) & ~(CONFIG_SYS_CACHELINE_SIZE - 1));
-
-	/* initialize mbuf pool */
-	init_rx_mbufs(p_npe);
-	init_tx_mbufs(p_npe);
-
-	if (ixEthAccPortRxCallbackRegister(p_npe->eth_id, npe_rx_callback,
-					   (u32)p_npe) != IX_ETH_ACC_SUCCESS) {
-		printf("can't register RX callback!\n");
-		return -1;
-	}
-
-	if (ixEthAccPortTxDoneCallbackRegister(p_npe->eth_id, npe_tx_callback,
-					       (u32)p_npe) != IX_ETH_ACC_SUCCESS) {
-		printf("can't register TX callback!\n");
-		return -1;
-	}
-
-	npe_set_mac_address(dev);
-
-	if (ixEthAccPortEnable(p_npe->eth_id) != IX_ETH_ACC_SUCCESS) {
-		printf("can't enable port!\n");
-		return -1;
-	}
-
-	p_npe->active = 1;
-
-	return 0;
-}
-
-#if 0 /* test-only: probably have to deal with it when booting linux (for a clean state) */
-/* Uninitialize CSR library. */
-static void npe_csr_unload(void)
-{
-	ixEthAccUnload();
-	ixEthDBUnload();
-	ixNpeMhUnload();
-	ixQMgrUnload();
-}
-
-/* callback which is used by ethAcc to recover RX buffers when stopping */
-static void npe_rx_stop_callback(u32 cbTag, IX_OSAL_MBUF *m, IxEthAccPortId portid)
-{
-	debug("%s\n", __FUNCTION__);
-}
-
-/* callback which is used by ethAcc to recover TX buffers when stopping */
-static void npe_tx_stop_callback(u32 cbTag, IX_OSAL_MBUF *m)
-{
-	debug("%s\n", __FUNCTION__);
-}
-#endif
-
-static void npe_halt(struct eth_device *dev)
-{
-	struct npe *p_npe = (struct npe *)dev->priv;
-	int i;
-
-	debug("%s\n", __FUNCTION__);
-
-	/* Delay to give time for recovery of mbufs */
-	for (i = 0; i < 100; i++) {
-		npe_poll(p_npe->eth_id);
-		udelay(100);
-	}
-
-#if 0 /* test-only: probably have to deal with it when booting linux (for a clean state) */
-	if (ixEthAccPortRxCallbackRegister(p_npe->eth_id, npe_rx_stop_callback,
-					   (u32)p_npe) != IX_ETH_ACC_SUCCESS) {
-		debug("Error registering rx callback!\n");
-	}
-
-	if (ixEthAccPortTxDoneCallbackRegister(p_npe->eth_id, npe_tx_stop_callback,
-					       (u32)p_npe) != IX_ETH_ACC_SUCCESS) {
-		debug("Error registering tx callback!\n");
-	}
-
-	if (ixEthAccPortDisable(p_npe->eth_id) != IX_ETH_ACC_SUCCESS) {
-		debug("npe_stop: Error disabling NPEB!\n");
-	}
-
-	/* Delay to give time for recovery of mbufs */
-	for (i = 0; i < 100; i++) {
-		npe_poll(p_npe->eth_id);
-		udelay(10000);
-	}
-
-	/*
-	 * For U-Boot only, we are probably launching Linux or other OS that
-	 * needs a clean slate for its NPE library.
-	 */
-#if 0 /* test-only */
-	for (i = 0; i < IX_ETH_ACC_NUMBER_OF_PORTS; i++) {
-		if (npe_used[i] && npe_exists[i])
-			if (ixNpeDlNpeStopAndReset(__eth_to_npe(i)) != IX_SUCCESS)
-				printf("Failed to stop and reset NPE B.\n");
-	}
-#endif
-
-#endif
-	p_npe->active = 0;
-}
-
-
-static int npe_send(struct eth_device *dev, void *packet, int len)
-{
-	struct npe *p_npe = (struct npe *)dev->priv;
-	u8 *dest;
-	int err;
-	IX_OSAL_MBUF *m;
-
-	debug("%s\n", __FUNCTION__);
-	m = mbuf_dequeue(&p_npe->txQHead);
-	dest = IX_OSAL_MBUF_MDATA(m);
-	IX_OSAL_MBUF_PKT_LEN(m) = IX_OSAL_MBUF_MLEN(m) = len;
-	IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m) = NULL;
-
-	memcpy(dest, (char *)packet, len);
-
-	if ((err = ixEthAccPortTxFrameSubmit(p_npe->eth_id, m, IX_ETH_ACC_TX_DEFAULT_PRIORITY))
-	    != IX_ETH_ACC_SUCCESS) {
-		printf("npe_send: Can't submit frame. err[%d]\n", err);
-		mbuf_enqueue(&p_npe->txQHead, m);
-		return 0;
-	}
-
-#ifdef DEBUG_PRINT_TX_FRAMES
-	{
-		u8 *ptr = IX_OSAL_MBUF_MDATA(m);
-		int i;
-
-		for (i=0; i<IX_OSAL_MBUF_MLEN(m); i++) {
-			printf("%02x ", *ptr++);
-		}
-		printf(" (tx-len=%d)\n", IX_OSAL_MBUF_MLEN(m));
-	}
-#endif
-
-	npe_poll(p_npe->eth_id);
-
-	return len;
-}
-
-static int npe_rx(struct eth_device *dev)
-{
-	struct npe *p_npe = (struct npe *)dev->priv;
-
-	debug("%s\n", __FUNCTION__);
-	npe_poll(p_npe->eth_id);
-
-	debug("%s: rx_write=%d rx_read=%d\n", __FUNCTION__, p_npe->rx_write, p_npe->rx_read);
-	while (p_npe->rx_write != p_npe->rx_read) {
-		debug("Reading message #%d\n", p_npe->rx_read);
-		NetReceive(NetRxPackets[p_npe->rx_read], p_npe->rx_len[p_npe->rx_read]);
-		p_npe->rx_read++;
-		if (p_npe->rx_read == PKTBUFSRX)
-			p_npe->rx_read = 0;
-	}
-
-	return 0;
-}
-
-int npe_initialize(bd_t * bis)
-{
-	static int virgin = 0;
-	struct eth_device *dev;
-	int eth_num = 0;
-	struct npe *p_npe = NULL;
-	uchar enetaddr[6];
-
-	for (eth_num = 0; eth_num < CONFIG_SYS_NPE_NUMS; eth_num++) {
-
-		/* See if we can actually bring up the interface, otherwise, skip it */
-#ifdef CONFIG_HAS_ETH1
-		if (eth_num == 1) {
-			if (!eth_getenv_enetaddr("eth1addr", enetaddr))
-				continue;
-		} else
-#endif
-			if (!eth_getenv_enetaddr("ethaddr", enetaddr))
-				continue;
-
-		/* Allocate device structure */
-		dev = (struct eth_device *)malloc(sizeof(*dev));
-		if (dev == NULL) {
-			printf ("%s: Cannot allocate eth_device %d\n", __FUNCTION__, eth_num);
-			return -1;
-		}
-		memset(dev, 0, sizeof(*dev));
-
-		/* Allocate our private use data */
-		p_npe = (struct npe *)malloc(sizeof(struct npe));
-		if (p_npe == NULL) {
-			printf("%s: Cannot allocate private hw data for eth_device %d",
-			       __FUNCTION__, eth_num);
-			free(dev);
-			return -1;
-		}
-		memset(p_npe, 0, sizeof(struct npe));
-
-		p_npe->eth_id = eth_num;
-		memcpy(dev->enetaddr, enetaddr, 6);
-#ifdef CONFIG_HAS_ETH1
-		if (eth_num == 1)
-			p_npe->phy_no = CONFIG_PHY1_ADDR;
-		else
-#endif
-			p_npe->phy_no = CONFIG_PHY_ADDR;
-
-		sprintf(dev->name, "NPE%d", eth_num);
-		dev->priv = (void *)p_npe;
-		dev->init = npe_init;
-		dev->halt = npe_halt;
-		dev->send = npe_send;
-		dev->recv = npe_rx;
-
-		p_npe->print_speed = 1;
-
-		if (0 == virgin) {
-			virgin = 1;
-
-			if (ixFeatureCtrlDeviceRead() == IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X) {
-				switch (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK) {
-				case IX_FEATURE_CTRL_SILICON_TYPE_B0:
-				default: /* newer than B0 */
-					/*
-					 * If it is B0 or newer Silicon, we
-					 * only enable port when its
-					 * corresponding Eth Coprocessor is
-					 * available.
-					 */
-					if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) ==
-					    IX_FEATURE_CTRL_COMPONENT_ENABLED)
-						npe_exists[IX_ETH_PORT_1] = true;
-
-					if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) ==
-					    IX_FEATURE_CTRL_COMPONENT_ENABLED)
-						npe_exists[IX_ETH_PORT_2] = true;
-					break;
-				case IX_FEATURE_CTRL_SILICON_TYPE_A0:
-					/*
-					 * If it is A0 Silicon, we enable both as both Eth Coprocessors
-					 * are available.
-					 */
-					npe_exists[IX_ETH_PORT_1] = true;
-					npe_exists[IX_ETH_PORT_2] = true;
-					break;
-				}
-			} else if (ixFeatureCtrlDeviceRead() == IX_FEATURE_CTRL_DEVICE_TYPE_IXP46X) {
-				if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) ==
-				    IX_FEATURE_CTRL_COMPONENT_ENABLED)
-					npe_exists[IX_ETH_PORT_1] = true;
-
-				if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) ==
-				    IX_FEATURE_CTRL_COMPONENT_ENABLED)
-					npe_exists[IX_ETH_PORT_2] = true;
-			}
-
-			npe_used[IX_ETH_PORT_1] = 1;
-			npe_used[IX_ETH_PORT_2] = 1;
-
-			npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool);
-			npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool +
-						 CONFIG_SYS_CACHELINE_SIZE - 1)
-						& ~(CONFIG_SYS_CACHELINE_SIZE - 1));
-
-			if (!npe_csr_load())
-				return 0;
-		}
-
-		eth_register(dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-		miiphy_register(dev->name, npe_miiphy_read, npe_miiphy_write);
-#endif
-
-	}			/* end for each supported device */
-
-	return 1;
-}