diff options
author | Tom Rini <trini@ti.com> | 2015-01-22 20:04:17 -0500 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2015-01-22 20:04:17 -0500 |
commit | ec0cc98f2cb7fa217ed0a1a54978e2d8f2fbc20c (patch) | |
tree | 6bfa9a96dcad59fc12f8825cfaf99c09680075f5 /drivers | |
parent | 032c6867a2925c95897afe07d1f0678114254cf6 (diff) | |
parent | db4a1767c09a4696792204d1cac33631cb38424e (diff) | |
download | u-boot-imx-ec0cc98f2cb7fa217ed0a1a54978e2d8f2fbc20c.zip u-boot-imx-ec0cc98f2cb7fa217ed0a1a54978e2d8f2fbc20c.tar.gz u-boot-imx-ec0cc98f2cb7fa217ed0a1a54978e2d8f2fbc20c.tar.bz2 |
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/fm/eth.c | 30 | ||||
-rw-r--r-- | drivers/net/fm/t1040.c | 3 | ||||
-rw-r--r-- | drivers/net/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/phy/aquantia.c | 156 | ||||
-rw-r--r-- | drivers/net/phy/phy.c | 3 | ||||
-rw-r--r-- | drivers/net/vsc9953.c | 497 |
7 files changed, 678 insertions, 13 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index fb0cf8c..46c4ac6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -66,3 +66,4 @@ obj-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o xilinx_ll_temac_mdio.o \ xilinx_ll_temac_fifo.o xilinx_ll_temac_sdma.o obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o obj-$(CONFIG_FSL_MC_ENET) += fsl_mc/ +obj-$(CONFIG_VSC9953) += vsc9953.o diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index f1e39b9..1d1089d 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -410,10 +410,15 @@ static int fm_eth_open(struct eth_device *dev, bd_t *bd) fmc_tx_port_graceful_stop_disable(fm_eth); #ifdef CONFIG_PHYLIB - ret = phy_startup(fm_eth->phydev); - if (ret) { - printf("%s: Could not initialize\n", fm_eth->phydev->dev->name); - return ret; + if (fm_eth->phydev) { + ret = phy_startup(fm_eth->phydev); + if (ret) { + printf("%s: Could not initialize\n", + fm_eth->phydev->dev->name); + return ret; + } + } else { + return 0; } #else fm_eth->phydev->speed = SPEED_1000; @@ -447,7 +452,8 @@ static void fm_eth_halt(struct eth_device *dev) /* disable bmi Rx port */ bmi_rx_port_disable(fm_eth->rx_port); - phy_shutdown(fm_eth->phydev); + if (fm_eth->phydev) + phy_shutdown(fm_eth->phydev); } static int fm_eth_send(struct eth_device *dev, void *buf, int len) @@ -625,11 +631,12 @@ static int init_phy(struct eth_device *dev) if (fm_eth->bus) { phydev = phy_connect(fm_eth->bus, fm_eth->phyaddr, dev, fm_eth->enet_if); - } - - if (!phydev) { - printf("Failed to connect\n"); - return -1; + if (!phydev) { + printf("Failed to connect\n"); + return -1; + } + } else { + return 0; } if (fm_eth->type == FM_ETH_1G_E) { @@ -711,8 +718,7 @@ int fm_eth_initialize(struct ccsr_fman *reg, struct fm_eth_info *info) if (!fm_eth_startup(fm_eth)) return 0; - if (init_phy(dev)) - return 0; + init_phy(dev); /* clear the ethernet address */ for (i = 0; i < 6; i++) diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c index d2a097e..0458366 100644 --- a/drivers/net/fm/t1040.c +++ b/drivers/net/fm/t1040.c @@ -50,7 +50,8 @@ phy_interface_t fman_port_enet_if(enum fm_port port) switch (port) { case FM1_DTSEC1: case FM1_DTSEC2: - if (is_serdes_configured(QSGMII_SW1_A + port - FM1_DTSEC1)) + if (is_serdes_configured(QSGMII_SW1_A + port - FM1_DTSEC1) || + is_serdes_configured(SGMII_SW1_MAC1 + port - FM1_DTSEC1)) return PHY_INTERFACE_MODE_QSGMII; case FM1_DTSEC3: case FM1_DTSEC4: diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index f46bf00..d096db8 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MV88E6352_SWITCH) += mv88e6352.o obj-$(CONFIG_PHYLIB) += phy.o obj-$(CONFIG_PHYLIB_10G) += generic_10g.o +obj-$(CONFIG_PHY_AQUANTIA) += aquantia.o obj-$(CONFIG_PHY_ATHEROS) += atheros.o obj-$(CONFIG_PHY_BROADCOM) += broadcom.o obj-$(CONFIG_PHY_CORTINA) += cortina.o diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c new file mode 100644 index 0000000..ef4da4e --- /dev/null +++ b/drivers/net/phy/aquantia.c @@ -0,0 +1,156 @@ +/* + * Aquantia PHY drivers + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Copyright 2014 Freescale Semiconductor, Inc. + */ +#include <config.h> +#include <common.h> +#include <phy.h> + +#ifndef CONFIG_PHYLIB_10G +#error The Aquantia PHY needs 10G support +#endif + +#define AQUNTIA_10G_CTL 0x20 +#define AQUNTIA_VENDOR_P1 0xc400 + +#define AQUNTIA_SPEED_LSB_MASK 0x2000 +#define AQUNTIA_SPEED_MSB_MASK 0x40 + +int aquantia_config(struct phy_device *phydev) +{ + u32 val = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR); + + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + /* 1000BASE-T mode */ + phydev->advertising = SUPPORTED_1000baseT_Full; + phydev->supported = phydev->advertising; + + val = (val & ~AQUNTIA_SPEED_LSB_MASK) | AQUNTIA_SPEED_MSB_MASK; + phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val); + } else if (phydev->interface == PHY_INTERFACE_MODE_XGMII) { + /* 10GBASE-T mode */ + phydev->advertising = SUPPORTED_10000baseT_Full; + phydev->supported = phydev->advertising; + + if (!(val & AQUNTIA_SPEED_LSB_MASK) || + !(val & AQUNTIA_SPEED_MSB_MASK)) + phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, + AQUNTIA_SPEED_LSB_MASK | + AQUNTIA_SPEED_MSB_MASK); + } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII_2500) { + /* 2.5GBASE-T mode */ + phydev->advertising = SUPPORTED_1000baseT_Full; + phydev->supported = phydev->advertising; + + phy_write(phydev, MDIO_MMD_AN, AQUNTIA_10G_CTL, 1); + phy_write(phydev, MDIO_MMD_AN, AQUNTIA_VENDOR_P1, 0x9440); + } else if (phydev->interface == PHY_INTERFACE_MODE_MII) { + /* 100BASE-TX mode */ + phydev->advertising = SUPPORTED_100baseT_Full; + phydev->supported = phydev->advertising; + + val = (val & ~AQUNTIA_SPEED_MSB_MASK) | AQUNTIA_SPEED_LSB_MASK; + phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val); + } + return 0; +} + +int aquantia_startup(struct phy_device *phydev) +{ + u32 reg, speed; + int i = 0; + + phydev->duplex = DUPLEX_FULL; + + /* if the AN is still in progress, wait till timeout. */ + phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); + reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (!(reg & MDIO_AN_STAT1_COMPLETE)) { + printf("%s Waiting for PHY auto negotiation to complete", + phydev->dev->name); + do { + udelay(1000); + reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); + if ((i++ % 500) == 0) + printf("."); + } while (!(reg & MDIO_AN_STAT1_COMPLETE) && + i < (4 * PHY_ANEG_TIMEOUT)); + + if (i > PHY_ANEG_TIMEOUT) + printf(" TIMEOUT !\n"); + } + + /* Read twice because link state is latched and a + * read moves the current state into the register */ + phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); + reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1); + if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS)) + phydev->link = 0; + else + phydev->link = 1; + + speed = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR); + if (speed & AQUNTIA_SPEED_MSB_MASK) { + if (speed & AQUNTIA_SPEED_LSB_MASK) + phydev->speed = SPEED_10000; + else + phydev->speed = SPEED_1000; + } else { + if (speed & AQUNTIA_SPEED_LSB_MASK) + phydev->speed = SPEED_100; + else + phydev->speed = SPEED_10; + } + + return 0; +} + +struct phy_driver aq1202_driver = { + .name = "Aquantia AQ1202", + .uid = 0x3a1b445, + .mask = 0xfffffff0, + .features = PHY_10G_FEATURES, + .mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS| + MDIO_MMD_PHYXS | MDIO_MMD_AN | + MDIO_MMD_VEND1), + .config = &aquantia_config, + .startup = &aquantia_startup, + .shutdown = &gen10g_shutdown, +}; + +struct phy_driver aq2104_driver = { + .name = "Aquantia AQ2104", + .uid = 0x3a1b460, + .mask = 0xfffffff0, + .features = PHY_10G_FEATURES, + .mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS| + MDIO_MMD_PHYXS | MDIO_MMD_AN | + MDIO_MMD_VEND1), + .config = &aquantia_config, + .startup = &aquantia_startup, + .shutdown = &gen10g_shutdown, +}; + +struct phy_driver aqr105_driver = { + .name = "Aquantia AQR105", + .uid = 0x3a1b4a2, + .mask = 0xfffffff0, + .features = PHY_10G_FEATURES, + .mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS| + MDIO_MMD_PHYXS | MDIO_MMD_AN | + MDIO_MMD_VEND1), + .config = &aquantia_config, + .startup = &aquantia_startup, + .shutdown = &gen10g_shutdown, +}; +int phy_aquantia_init(void) +{ + phy_register(&aq1202_driver); + phy_register(&aq2104_driver); + phy_register(&aqr105_driver); + + return 0; +} diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 5b04c85..df7e945 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -442,6 +442,9 @@ static LIST_HEAD(phy_drivers); int phy_init(void) { +#ifdef CONFIG_PHY_AQUANTIA + phy_aquantia_init(); +#endif #ifdef CONFIG_PHY_ATHEROS phy_atheros_init(); #endif diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c new file mode 100644 index 0000000..9fc3c18 --- /dev/null +++ b/drivers/net/vsc9953.c @@ -0,0 +1,497 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Driver for the Vitesse VSC9953 L2 Switch + */ + +#include <asm/io.h> +#include <asm/fsl_serdes.h> +#include <fm_eth.h> +#include <asm/fsl_memac.h> +#include <vsc9953.h> + +static struct vsc9953_info vsc9953_l2sw = { + .port[0] = VSC9953_PORT_INFO_INITIALIZER(0), + .port[1] = VSC9953_PORT_INFO_INITIALIZER(1), + .port[2] = VSC9953_PORT_INFO_INITIALIZER(2), + .port[3] = VSC9953_PORT_INFO_INITIALIZER(3), + .port[4] = VSC9953_PORT_INFO_INITIALIZER(4), + .port[5] = VSC9953_PORT_INFO_INITIALIZER(5), + .port[6] = VSC9953_PORT_INFO_INITIALIZER(6), + .port[7] = VSC9953_PORT_INFO_INITIALIZER(7), + .port[8] = VSC9953_PORT_INFO_INITIALIZER(8), + .port[9] = VSC9953_PORT_INFO_INITIALIZER(9), +}; + +void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus) +{ + if (!VSC9953_PORT_CHECK(port)) + return; + + vsc9953_l2sw.port[port].bus = bus; +} + +void vsc9953_port_info_set_phy_address(int port, int address) +{ + if (!VSC9953_PORT_CHECK(port)) + return; + + vsc9953_l2sw.port[port].phyaddr = address; +} + +void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int) +{ + if (!VSC9953_PORT_CHECK(port)) + return; + + vsc9953_l2sw.port[port].enet_if = phy_int; +} + +void vsc9953_port_enable(int port) +{ + if (!VSC9953_PORT_CHECK(port)) + return; + + vsc9953_l2sw.port[port].enabled = 1; +} + +void vsc9953_port_disable(int port) +{ + if (!VSC9953_PORT_CHECK(port)) + return; + + vsc9953_l2sw.port[port].enabled = 0; +} + +static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr, + int regnum, int value) +{ + int timeout = 50000; + + out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | + ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | + (0x1 << 1)); + asm("sync"); + + while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout) + udelay(1); + + if (timeout == 0) + debug("Timeout waiting for MDIO write\n"); +} + +static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr, + int regnum) +{ + int value = 0xFFFF; + int timeout = 50000; + + while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout) + udelay(1); + if (timeout == 0) { + debug("Timeout waiting for MDIO operation to finish\n"); + return value; + } + + /* Put the address of the phy, and the register + * number into MIICMD + */ + out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | + ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | + (0x2 << 1)); + + timeout = 50000; + /* Wait for the the indication that the read is done */ + while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout) + udelay(1); + if (timeout == 0) + debug("Timeout waiting for MDIO read\n"); + + /* Grab the value read from the PHY */ + value = in_le32(&phyregs->miimdata); + + if ((value & 0x00030000) == 0) + return value & 0x0000ffff; + + return value; +} + +static int init_phy(struct eth_device *dev) +{ + struct vsc9953_port_info *l2sw_port = dev->priv; + struct phy_device *phydev = NULL; + +#ifdef CONFIG_PHYLIB + if (!l2sw_port->bus) + return 0; + phydev = phy_connect(l2sw_port->bus, l2sw_port->phyaddr, dev, + l2sw_port->enet_if); + if (!phydev) { + printf("Failed to connect\n"); + return -1; + } + + phydev->supported &= SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full; + phydev->advertising = phydev->supported; + + l2sw_port->phydev = phydev; + + phy_config(phydev); +#endif + + return 0; +} + +static int vsc9953_port_init(int port) +{ + struct eth_device *dev; + + /* Internal ports never have a PHY */ + if (VSC9953_INTERNAL_PORT_CHECK(port)) + return 0; + + /* alloc eth device */ + dev = (struct eth_device *)calloc(1, sizeof(struct eth_device)); + if (!dev) + return 1; + + sprintf(dev->name, "SW@PORT%d", port); + dev->priv = &vsc9953_l2sw.port[port]; + dev->init = NULL; + dev->halt = NULL; + dev->send = NULL; + dev->recv = NULL; + + if (init_phy(dev)) { + free(dev); + return 1; + } + + return 0; +} + +void vsc9953_init(bd_t *bis) +{ + u32 i, hdx_cfg = 0, phy_addr = 0; + int timeout; + struct vsc9953_system_reg *l2sys_reg; + struct vsc9953_qsys_reg *l2qsys_reg; + struct vsc9953_dev_gmii *l2dev_gmii_reg; + struct vsc9953_analyzer *l2ana_reg; + struct vsc9953_devcpu_gcb *l2dev_gcb; + + l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET + + VSC9953_DEV_GMII_OFFSET); + + l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + + VSC9953_ANA_OFFSET); + + l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + + VSC9953_SYS_OFFSET); + + l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + + VSC9953_QSYS_OFFSET); + + l2dev_gcb = (struct vsc9953_devcpu_gcb *)(VSC9953_OFFSET + + VSC9953_DEVCPU_GCB); + + out_le32(&l2dev_gcb->chip_regs.soft_rst, + CONFIG_VSC9953_SOFT_SWC_RST_ENA); + timeout = 50000; + while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) & + CONFIG_VSC9953_SOFT_SWC_RST_ENA) && --timeout) + udelay(1); /* busy wait for vsc9953 soft reset */ + if (timeout == 0) + debug("Timeout waiting for VSC9953 to reset\n"); + + out_le32(&l2sys_reg->sys.reset_cfg, CONFIG_VSC9953_MEM_ENABLE | + CONFIG_VSC9953_MEM_INIT); + + timeout = 50000; + while ((in_le32(&l2sys_reg->sys.reset_cfg) & + CONFIG_VSC9953_MEM_INIT) && --timeout) + udelay(1); /* busy wait for vsc9953 memory init */ + if (timeout == 0) + debug("Timeout waiting for VSC9953 memory to initialize\n"); + + out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg) + | CONFIG_VSC9953_CORE_ENABLE)); + + /* VSC9953 Setting to be done once only */ + out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00); + + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + if (vsc9953_port_init(i)) + printf("Failed to initialize l2switch port %d\n", i); + + /* Enable VSC9953 GMII Ports Port ID 0 - 7 */ + if (VSC9953_INTERNAL_PORT_CHECK(i)) { + out_le32(&l2ana_reg->pfc[i].pfc_cfg, + CONFIG_VSC9953_PFC_FC_QSGMII); + out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], + CONFIG_VSC9953_MAC_FC_CFG_QSGMII); + } else { + out_le32(&l2ana_reg->pfc[i].pfc_cfg, + CONFIG_VSC9953_PFC_FC); + out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], + CONFIG_VSC9953_MAC_FC_CFG); + } + out_le32(&l2dev_gmii_reg->port_mode.clock_cfg, + CONFIG_VSC9953_CLOCK_CFG); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg, + CONFIG_VSC9953_MAC_ENA_CFG); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg, + CONFIG_VSC9953_MAC_MODE_CFG); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg, + CONFIG_VSC9953_MAC_IFG_CFG); + /* mac_hdx_cfg varies with port id*/ + hdx_cfg = (CONFIG_VSC9953_MAC_HDX_CFG | (i << 16)); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg); + out_le32(&l2sys_reg->sys.front_port_mode[i], + CONFIG_VSC9953_FRONT_PORT_MODE); + out_le32(&l2qsys_reg->sys.switch_port_mode[i], + CONFIG_VSC9953_PORT_ENA); + out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg, + CONFIG_VSC9953_MAC_MAX_LEN); + out_le32(&l2sys_reg->pause_cfg.pause_cfg[i], + CONFIG_VSC9953_PAUSE_CFG); + /* WAIT FOR 2 us*/ + udelay(2); + + l2dev_gmii_reg = (struct vsc9953_dev_gmii *)( + (char *)l2dev_gmii_reg + + T1040_SWITCH_GMII_DEV_OFFSET); + + /* Initialize Lynx PHY Wrappers */ + phy_addr = 0; + if (vsc9953_l2sw.port[i].enet_if == + PHY_INTERFACE_MODE_QSGMII) + phy_addr = (i + 0x4) & 0x1F; + else if (vsc9953_l2sw.port[i].enet_if == + PHY_INTERFACE_MODE_SGMII) + phy_addr = (i + 1) & 0x1F; + + if (phy_addr) { + /* SGMII IF mode + AN enable */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x14, PHY_SGMII_IF_MODE_AN | + PHY_SGMII_IF_MODE_SGMII); + /* Dev ability according to SGMII specification */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x4, PHY_SGMII_DEV_ABILITY_SGMII); + /* Adjust link timer for SGMII + * 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 + */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x13, 0x0003); + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x12, 0x0d40); + /* Restart AN */ + vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, + 0x0, PHY_SGMII_CR_DEF_VAL | + PHY_SGMII_CR_RESET_AN); + + timeout = 50000; + while ((vsc9953_mdio_read(&l2dev_gcb->mii_mng[0], + phy_addr, 0x01) & 0x0020) && --timeout) + udelay(1); /* wait for AN to complete */ + if (timeout == 0) + debug("Timeout waiting for AN to complete\n"); + } + } + + printf("VSC9953 L2 switch initialized\n"); + return; +} + +#ifdef CONFIG_VSC9953_CMD +/* Enable/disable status of a VSC9953 port */ +static void vsc9953_port_status_set(int port_nr, u8 enabled) +{ + u32 val; + struct vsc9953_qsys_reg *l2qsys_reg; + + /* Administrative down */ + if (vsc9953_l2sw.port[port_nr].enabled == 0) + return; + + l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + + VSC9953_QSYS_OFFSET); + + val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_nr]); + if (enabled == 1) + val |= (1 << 13); + else + val &= ~(1 << 13); + + out_le32(&l2qsys_reg->sys.switch_port_mode[port_nr], val); +} + +/* Set all VSC9953 ports' status */ +static void vsc9953_port_all_status_set(u8 enabled) +{ + int i; + + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_status_set(i, enabled); +} + +/* Start autonegotiation for a VSC9953 PHY */ +static void vsc9953_phy_autoneg(int port_nr) +{ + if (!vsc9953_l2sw.port[port_nr].phydev) + return; + + if (vsc9953_l2sw.port[port_nr].phydev->drv->startup( + vsc9953_l2sw.port[port_nr].phydev)) + printf("Failed to start PHY for port %d\n", port_nr); +} + +/* Start autonegotiation for all VSC9953 PHYs */ +static void vsc9953_phy_all_autoneg(void) +{ + int i; + + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_phy_autoneg(i); +} + +/* Print a VSC9953 port's configuration */ +static void vsc9953_port_config_show(int port) +{ + int speed; + int duplex; + int link; + u8 enabled; + u32 val; + struct vsc9953_qsys_reg *l2qsys_reg; + + l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + + VSC9953_QSYS_OFFSET); + + val = in_le32(&l2qsys_reg->sys.switch_port_mode[port]); + enabled = vsc9953_l2sw.port[port].enabled & + ((val & 0x00002000) >> 13); + + /* internal ports (8 and 9) are fixed */ + if (VSC9953_INTERNAL_PORT_CHECK(port)) { + link = 1; + speed = SPEED_2500; + duplex = DUPLEX_FULL; + } else { + if (vsc9953_l2sw.port[port].phydev) { + link = vsc9953_l2sw.port[port].phydev->link; + speed = vsc9953_l2sw.port[port].phydev->speed; + duplex = vsc9953_l2sw.port[port].phydev->duplex; + } else { + link = -1; + speed = -1; + duplex = -1; + } + } + + printf("%8d ", port); + printf("%8s ", enabled == 1 ? "enabled" : "disabled"); + printf("%8s ", link == 1 ? "up" : "down"); + + switch (speed) { + case SPEED_10: + printf("%8d ", 10); + break; + case SPEED_100: + printf("%8d ", 100); + break; + case SPEED_1000: + printf("%8d ", 1000); + break; + case SPEED_2500: + printf("%8d ", 2500); + break; + case SPEED_10000: + printf("%8d ", 10000); + break; + default: + printf("%8s ", "-"); + } + + printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half"); +} + +/* Print VSC9953 ports' configuration */ +static void vsc9953_port_all_config_show(void) +{ + int i; + + for (i = 0; i < VSC9953_MAX_PORTS; i++) + vsc9953_port_config_show(i); +} + +/* function to interpret commands starting with "ethsw " */ +static int do_ethsw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u8 enable; + u32 port; + + if (argc < 4) + return -1; + + if (strcmp(argv[1], "port")) + return -1; + + if (!strcmp(argv[3], "show")) { + if (!strcmp(argv[2], "all")) { + vsc9953_phy_all_autoneg(); + printf("%8s %8s %8s %8s %8s\n", + "Port", "Status", "Link", "Speed", + "Duplex"); + vsc9953_port_all_config_show(); + return 0; + } else { + port = simple_strtoul(argv[2], NULL, 10); + if (!VSC9953_PORT_CHECK(port)) + return -1; + vsc9953_phy_autoneg(port); + printf("%8s %8s %8s %8s %8s\n", + "Port", "Status", "Link", "Speed", + "Duplex"); + vsc9953_port_config_show(port); + return 0; + } + } else if (!strcmp(argv[3], "enable")) { + enable = 1; + } else if (!strcmp(argv[3], "disable")) { + enable = 0; + } else { + return -1; + } + + if (!strcmp(argv[2], "all")) { + vsc9953_port_all_status_set(enable); + return 0; + } else { + port = simple_strtoul(argv[2], NULL, 10); + if (!VSC9953_PORT_CHECK(port)) + return -1; + vsc9953_port_status_set(port, enable); + return 0; + } + + return -1; +} + +U_BOOT_CMD(ethsw, 5, 0, do_ethsw, + "vsc9953 l2 switch commands", + "port <port_nr> enable|disable\n" + " - enable/disable an l2 switch port\n" + " port_nr=0..9; use \"all\" for all ports\n" + "ethsw port <port_nr> show\n" + " - show an l2 switch port's configuration\n" + " port_nr=0..9; use \"all\" for all ports\n" +); +#endif /* CONFIG_VSC9953_CMD */ |