Merge branch 'u-boot/master' into 'u-boot-arm/master'

Conflicts:
	arch/arm/cpu/armv7/rmobile/Makefile
	doc/README.scrapyard

Needed manual fix:
	arch/arm/cpu/armv7/omap-common/Makefile
	board/compulab/cm_t335/u-boot.lds

73 files changed, 10471 insertions, 1240 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 9cec2ba..5d03f37 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,8 +1,8 @@
-obj-y += bios_emulator/
+obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
 obj-y += crypto/
-obj-y += fpga/
+obj-$(CONFIG_FPGA) += fpga/
 obj-y += hwmon/
 obj-y += misc/
 obj-y += pcmcia/
@@ -13,3 +13,4 @@ obj-y += tpm/
 obj-y += twserial/
 obj-y += video/
 obj-y += watchdog/
+obj-$(CONFIG_QE) += qe/
diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile
index dd42e0f..52a2ceb 100644
--- a/drivers/bios_emulator/Makefile
+++ b/drivers/bios_emulator/Makefile
@@ -1,8 +1,6 @@
 X86DIR  = x86emu
 
-$(shell mkdir -p $(obj)$(X86DIR))
-
-obj-$(CONFIG_BIOSEMU)	= atibios.o biosemu.o besys.o bios.o \
+obj-y = atibios.o biosemu.o besys.o bios.o \
 	$(X86DIR)/decode.o \
 	$(X86DIR)/ops2.o \
 	$(X86DIR)/ops.o \
@@ -10,9 +8,8 @@ obj-$(CONFIG_BIOSEMU)	= atibios.o biosemu.o besys.o bios.o \
 	$(X86DIR)/sys.o \
 	$(X86DIR)/debug.o
 
-EXTRA_CFLAGS += -I. -I./include -I$(TOPDIR)/include \
+EXTRA_CFLAGS += -I. -I./include \
 	-D__PPC__  -D__BIG_ENDIAN__
 
 CFLAGS += $(EXTRA_CFLAGS)
-HOSTCFLAGS += $(EXTRA_CFLAGS)
 CPPFLAGS += $(EXTRA_CFLAGS)
diff --git a/drivers/ddr/fsl/Makefile b/drivers/ddr/fsl/Makefile
new file mode 100644
index 0000000..265204f
--- /dev/null
+++ b/drivers/ddr/fsl/Makefile
@@ -0,0 +1,34 @@
+#
+# Copyright 2008-2011 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# Version 2 as published by the Free Software Foundation.
+#
+
+obj-$(CONFIG_SYS_FSL_DDR1)	+= main.o util.o ctrl_regs.o options.o \
+				   lc_common_dimm_params.o
+
+obj-$(CONFIG_SYS_FSL_DDR2)	+= main.o util.o ctrl_regs.o options.o \
+				   lc_common_dimm_params.o
+
+obj-$(CONFIG_SYS_FSL_DDR3)	+= main.o util.o ctrl_regs.o options.o \
+				   lc_common_dimm_params.o
+ifdef CONFIG_DDR_SPD
+SPD := y
+endif
+ifdef CONFIG_SPD_EEPROM
+SPD := y
+endif
+ifdef SPD
+obj-$(CONFIG_SYS_FSL_DDR1)	+= ddr1_dimm_params.o
+obj-$(CONFIG_SYS_FSL_DDR2)	+= ddr2_dimm_params.o
+obj-$(CONFIG_SYS_FSL_DDR3)	+= ddr3_dimm_params.o
+endif
+
+obj-$(CONFIG_FSL_DDR_INTERACTIVE)	+= interactive.o
+obj-$(CONFIG_SYS_FSL_DDRC_GEN1)	+= mpc85xx_ddr_gen1.o
+obj-$(CONFIG_SYS_FSL_DDRC_GEN2)	+= mpc85xx_ddr_gen2.o
+obj-$(CONFIG_SYS_FSL_DDRC_GEN3)	+= mpc85xx_ddr_gen3.o
+obj-$(CONFIG_SYS_FSL_DDR_86XX)		+= mpc86xx_ddr.o
+obj-$(CONFIG_SYS_FSL_DDRC_ARM_GEN3)	+= arm_ddr_gen3.o
diff --git a/drivers/ddr/fsl/arm_ddr_gen3.c b/drivers/ddr/fsl/arm_ddr_gen3.c
new file mode 100644
index 0000000..bf11390
--- /dev/null
+++ b/drivers/ddr/fsl/arm_ddr_gen3.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Derived from mpc85xx_ddr_gen3.c, removed all workarounds
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/processor.h>
+#include <fsl_immap.h>
+
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
+#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
+#endif
+
+
+/*
+ * regs has the to-be-set values for DDR controller registers
+ * ctrl_num is the DDR controller number
+ * step: 0 goes through the initialization in one pass
+ *       1 sets registers and returns before enabling controller
+ *       2 resumes from step 1 and continues to initialize
+ * Dividing the initialization to two steps to deassert DDR reset signal
+ * to comply with JEDEC specs for RDIMMs.
+ */
+void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+			     unsigned int ctrl_num, int step)
+{
+	unsigned int i, bus_width;
+	struct ccsr_ddr __iomem *ddr;
+	u32 temp_sdram_cfg;
+	u32 total_gb_size_per_controller;
+	int timeout;
+
+	switch (ctrl_num) {
+	case 0:
+		ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+		break;
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+	case 1:
+		ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
+		break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+	case 2:
+		ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
+		break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+	case 3:
+		ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
+		break;
+#endif
+	default:
+		printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num);
+		return;
+	}
+
+	if (step == 2)
+		goto step2;
+
+	if (regs->ddr_eor)
+		out_be32(&ddr->eor, regs->ddr_eor);
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (i == 0) {
+			out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs0_config, regs->cs[i].config);
+			out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
+
+		} else if (i == 1) {
+			out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs1_config, regs->cs[i].config);
+			out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
+
+		} else if (i == 2) {
+			out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs2_config, regs->cs[i].config);
+			out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
+
+		} else if (i == 3) {
+			out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs3_config, regs->cs[i].config);
+			out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
+		}
+	}
+
+	out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
+	out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
+	out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+	out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+	out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+	out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+	out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
+	out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
+	out_be32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4);
+	out_be32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5);
+	out_be32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6);
+	out_be32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7);
+	out_be32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8);
+	out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
+	out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+	out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
+	out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+	out_be32(&ddr->init_addr, regs->ddr_init_addr);
+	out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+
+	out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
+	out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
+	out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
+	out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+#ifndef CONFIG_SYS_FSL_DDR_EMU
+	/*
+	 * Skip these two registers if running on emulator
+	 * because emulator doesn't have skew between bytes.
+	 */
+
+	if (regs->ddr_wrlvl_cntl_2)
+		out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
+	if (regs->ddr_wrlvl_cntl_3)
+		out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
+#endif
+
+	out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
+	out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
+	out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
+	out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
+	out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+	out_be32(&ddr->err_disable, regs->err_disable);
+	out_be32(&ddr->err_int_en, regs->err_int_en);
+	for (i = 0; i < 32; i++) {
+		if (regs->debug[i]) {
+			debug("Write to debug_%d as %08x\n", i + 1,
+			      regs->debug[i]);
+			out_be32(&ddr->debug[i], regs->debug[i]);
+		}
+	}
+
+	/*
+	 * For RDIMMs, JEDEC spec requires clocks to be stable before reset is
+	 * deasserted. Clocks start when any chip select is enabled and clock
+	 * control register is set. Because all DDR components are connected to
+	 * one reset signal, this needs to be done in two steps. Step 1 is to
+	 * get the clocks started. Step 2 resumes after reset signal is
+	 * deasserted.
+	 */
+	if (step == 1) {
+		udelay(200);
+		return;
+	}
+
+step2:
+	/* Set, but do not enable the memory */
+	temp_sdram_cfg = regs->ddr_sdram_cfg;
+	temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
+	out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
+
+	/*
+	 * 500 painful micro-seconds must elapse between
+	 * the DDR clock setup and the DDR config enable.
+	 * DDR2 need 200 us, and DDR3 need 500 us from spec,
+	 * we choose the max, that is 500 us for all of case.
+	 */
+	udelay(500);
+	asm volatile("dsb sy;isb");
+
+	/* Let the controller go */
+	temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
+	out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
+	asm volatile("dsb sy;isb");
+
+	total_gb_size_per_controller = 0;
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (!(regs->cs[i].config & 0x80000000))
+			continue;
+		total_gb_size_per_controller += 1 << (
+			((regs->cs[i].config >> 14) & 0x3) + 2 +
+			((regs->cs[i].config >> 8) & 0x7) + 12 +
+			((regs->cs[i].config >> 0) & 0x7) + 8 +
+			3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
+			26);			/* minus 26 (count of 64M) */
+	}
+	if (regs->cs[0].config & 0x20000000) {
+		/* 2-way interleaving */
+		total_gb_size_per_controller <<= 1;
+	}
+	/*
+	 * total memory / bus width = transactions needed
+	 * transactions needed / data rate = seconds
+	 * to add plenty of buffer, double the time
+	 * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
+	 * Let's wait for 800ms
+	 */
+	bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
+			>> SDRAM_CFG_DBW_SHIFT);
+	timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
+		(get_ddr_freq(0) >> 20)) << 1;
+	total_gb_size_per_controller >>= 4;	/* shift down to gb size */
+	debug("total %d GB\n", total_gb_size_per_controller);
+	debug("Need to wait up to %d * 10ms\n", timeout);
+
+	/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done.  */
+	while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+		(timeout >= 0)) {
+		udelay(10000);		/* throttle polling rate */
+		timeout--;
+	}
+
+	if (timeout <= 0)
+		printf("Waiting for D_INIT timeout. Memory may not work.\n");
+}
diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
new file mode 100644
index 0000000..6bf22cf
--- /dev/null
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -0,0 +1,1662 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
+ * Based on code from spd_sdram.c
+ * Author: James Yang [at freescale.com]
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+
+#include <fsl_ddr.h>
+#include <fsl_immap.h>
+#include <asm/io.h>
+
+#define _DDR_ADDR CONFIG_SYS_FSL_DDR_ADDR
+
+static u32 fsl_ddr_get_version(void)
+{
+	struct ccsr_ddr __iomem *ddr;
+	u32 ver_major_minor_errata;
+
+	ddr = (void *)_DDR_ADDR;
+	ver_major_minor_errata = (in_be32(&ddr->ip_rev1) & 0xFFFF) << 8;
+	ver_major_minor_errata |= (in_be32(&ddr->ip_rev2) & 0xFF00) >> 8;
+
+	return ver_major_minor_errata;
+}
+
+unsigned int picos_to_mclk(unsigned int picos);
+
+/*
+ * Determine Rtt value.
+ *
+ * This should likely be either board or controller specific.
+ *
+ * Rtt(nominal) - DDR2:
+ *	0 = Rtt disabled
+ *	1 = 75 ohm
+ *	2 = 150 ohm
+ *	3 = 50 ohm
+ * Rtt(nominal) - DDR3:
+ *	0 = Rtt disabled
+ *	1 = 60 ohm
+ *	2 = 120 ohm
+ *	3 = 40 ohm
+ *	4 = 20 ohm
+ *	5 = 30 ohm
+ *
+ * FIXME: Apparently 8641 needs a value of 2
+ * FIXME: Old code seys if 667 MHz or higher, use 3 on 8572
+ *
+ * FIXME: There was some effort down this line earlier:
+ *
+ *	unsigned int i;
+ *	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL/2; i++) {
+ *		if (popts->dimmslot[i].num_valid_cs
+ *		    && (popts->cs_local_opts[2*i].odt_rd_cfg
+ *			|| popts->cs_local_opts[2*i].odt_wr_cfg)) {
+ *			rtt = 2;
+ *			break;
+ *		}
+ *	}
+ */
+static inline int fsl_ddr_get_rtt(void)
+{
+	int rtt;
+
+#if defined(CONFIG_SYS_FSL_DDR1)
+	rtt = 0;
+#elif defined(CONFIG_SYS_FSL_DDR2)
+	rtt = 3;
+#else
+	rtt = 0;
+#endif
+
+	return rtt;
+}
+
+/*
+ * compute the CAS write latency according to DDR3 spec
+ * CWL = 5 if tCK >= 2.5ns
+ *       6 if 2.5ns > tCK >= 1.875ns
+ *       7 if 1.875ns > tCK >= 1.5ns
+ *       8 if 1.5ns > tCK >= 1.25ns
+ *       9 if 1.25ns > tCK >= 1.07ns
+ *       10 if 1.07ns > tCK >= 0.935ns
+ *       11 if 0.935ns > tCK >= 0.833ns
+ *       12 if 0.833ns > tCK >= 0.75ns
+ */
+static inline unsigned int compute_cas_write_latency(void)
+{
+	unsigned int cwl;
+	const unsigned int mclk_ps = get_memory_clk_period_ps();
+
+	if (mclk_ps >= 2500)
+		cwl = 5;
+	else if (mclk_ps >= 1875)
+		cwl = 6;
+	else if (mclk_ps >= 1500)
+		cwl = 7;
+	else if (mclk_ps >= 1250)
+		cwl = 8;
+	else if (mclk_ps >= 1070)
+		cwl = 9;
+	else if (mclk_ps >= 935)
+		cwl = 10;
+	else if (mclk_ps >= 833)
+		cwl = 11;
+	else if (mclk_ps >= 750)
+		cwl = 12;
+	else {
+		cwl = 12;
+		printf("Warning: CWL is out of range\n");
+	}
+	return cwl;
+}
+
+/* Chip Select Configuration (CSn_CONFIG) */
+static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
+			       const dimm_params_t *dimm_params)
+{
+	unsigned int cs_n_en = 0; /* Chip Select enable */
+	unsigned int intlv_en = 0; /* Memory controller interleave enable */
+	unsigned int intlv_ctl = 0; /* Interleaving control */
+	unsigned int ap_n_en = 0; /* Chip select n auto-precharge enable */
+	unsigned int odt_rd_cfg = 0; /* ODT for reads configuration */
+	unsigned int odt_wr_cfg = 0; /* ODT for writes configuration */
+	unsigned int ba_bits_cs_n = 0; /* Num of bank bits for SDRAM on CSn */
+	unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */
+	unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */
+	int go_config = 0;
+
+	/* Compute CS_CONFIG only for existing ranks of each DIMM.  */
+	switch (i) {
+	case 0:
+		if (dimm_params[dimm_number].n_ranks > 0) {
+			go_config = 1;
+			/* These fields only available in CS0_CONFIG */
+			if (!popts->memctl_interleaving)
+				break;
+			switch (popts->memctl_interleaving_mode) {
+			case FSL_DDR_CACHE_LINE_INTERLEAVING:
+			case FSL_DDR_PAGE_INTERLEAVING:
+			case FSL_DDR_BANK_INTERLEAVING:
+			case FSL_DDR_SUPERBANK_INTERLEAVING:
+				intlv_en = popts->memctl_interleaving;
+				intlv_ctl = popts->memctl_interleaving_mode;
+				break;
+			default:
+				break;
+			}
+		}
+		break;
+	case 1:
+		if ((dimm_number == 0 && dimm_params[0].n_ranks > 1) || \
+		    (dimm_number == 1 && dimm_params[1].n_ranks > 0))
+			go_config = 1;
+		break;
+	case 2:
+		if ((dimm_number == 0 && dimm_params[0].n_ranks > 2) || \
+		   (dimm_number >= 1 && dimm_params[dimm_number].n_ranks > 0))
+			go_config = 1;
+		break;
+	case 3:
+		if ((dimm_number == 0 && dimm_params[0].n_ranks > 3) || \
+		    (dimm_number == 1 && dimm_params[1].n_ranks > 1) || \
+		    (dimm_number == 3 && dimm_params[3].n_ranks > 0))
+			go_config = 1;
+		break;
+	default:
+		break;
+	}
+	if (go_config) {
+		unsigned int n_banks_per_sdram_device;
+		cs_n_en = 1;
+		ap_n_en = popts->cs_local_opts[i].auto_precharge;
+		odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg;
+		odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg;
+		n_banks_per_sdram_device
+			= dimm_params[dimm_number].n_banks_per_sdram_device;
+		ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2;
+		row_bits_cs_n = dimm_params[dimm_number].n_row_addr - 12;
+		col_bits_cs_n = dimm_params[dimm_number].n_col_addr - 8;
+	}
+	ddr->cs[i].config = (0
+		| ((cs_n_en & 0x1) << 31)
+		| ((intlv_en & 0x3) << 29)
+		| ((intlv_ctl & 0xf) << 24)
+		| ((ap_n_en & 0x1) << 23)
+
+		/* XXX: some implementation only have 1 bit starting at left */
+		| ((odt_rd_cfg & 0x7) << 20)
+
+		/* XXX: Some implementation only have 1 bit starting at left */
+		| ((odt_wr_cfg & 0x7) << 16)
+
+		| ((ba_bits_cs_n & 0x3) << 14)
+		| ((row_bits_cs_n & 0x7) << 8)
+		| ((col_bits_cs_n & 0x7) << 0)
+		);
+	debug("FSLDDR: cs[%d]_config = 0x%08x\n", i,ddr->cs[i].config);
+}
+
+/* Chip Select Configuration 2 (CSn_CONFIG_2) */
+/* FIXME: 8572 */
+static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
+{
+	unsigned int pasr_cfg = 0;	/* Partial array self refresh config */
+
+	ddr->cs[i].config_2 = ((pasr_cfg & 7) << 24);
+	debug("FSLDDR: cs[%d]_config_2 = 0x%08x\n", i, ddr->cs[i].config_2);
+}
+
+/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
+
+#if !defined(CONFIG_SYS_FSL_DDR1)
+static inline int avoid_odt_overlap(const dimm_params_t *dimm_params)
+{
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 1
+	if (dimm_params[0].n_ranks == 4)
+		return 1;
+#endif
+
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 2
+	if ((dimm_params[0].n_ranks == 2) &&
+		(dimm_params[1].n_ranks == 2))
+		return 1;
+
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+	if (dimm_params[0].n_ranks == 4)
+		return 1;
+#endif
+#endif
+	return 0;
+}
+
+/*
+ * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
+ *
+ * Avoid writing for DDR I.  The new PQ38 DDR controller
+ * dreams up non-zero default values to be backwards compatible.
+ */
+static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
+				const memctl_options_t *popts,
+				const dimm_params_t *dimm_params)
+{
+	unsigned char trwt_mclk = 0;   /* Read-to-write turnaround */
+	unsigned char twrt_mclk = 0;   /* Write-to-read turnaround */
+	/* 7.5 ns on -3E; 0 means WL - CL + BL/2 + 1 */
+	unsigned char trrt_mclk = 0;   /* Read-to-read turnaround */
+	unsigned char twwt_mclk = 0;   /* Write-to-write turnaround */
+
+	/* Active powerdown exit timing (tXARD and tXARDS). */
+	unsigned char act_pd_exit_mclk;
+	/* Precharge powerdown exit timing (tXP). */
+	unsigned char pre_pd_exit_mclk;
+	/* ODT powerdown exit timing (tAXPD). */
+	unsigned char taxpd_mclk;
+	/* Mode register set cycle time (tMRD). */
+	unsigned char tmrd_mclk;
+
+#ifdef CONFIG_SYS_FSL_DDR3
+	/*
+	 * (tXARD and tXARDS). Empirical?
+	 * The DDR3 spec has not tXARD,
+	 * we use the tXP instead of it.
+	 * tXP=max(3nCK, 7.5ns) for DDR3.
+	 * spec has not the tAXPD, we use
+	 * tAXPD=1, need design to confirm.
+	 */
+	int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
+	unsigned int data_rate = get_ddr_freq(0);
+	tmrd_mclk = 4;
+	/* set the turnaround time */
+
+	/*
+	 * for single quad-rank DIMM and two dual-rank DIMMs
+	 * to avoid ODT overlap
+	 */
+	if (avoid_odt_overlap(dimm_params)) {
+		twwt_mclk = 2;
+		trrt_mclk = 1;
+	}
+	/* for faster clock, need more time for data setup */
+	trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1;
+
+	if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving))
+		twrt_mclk = 1;
+
+	if (popts->dynamic_power == 0) {	/* powerdown is not used */
+		act_pd_exit_mclk = 1;
+		pre_pd_exit_mclk = 1;
+		taxpd_mclk = 1;
+	} else {
+		/* act_pd_exit_mclk = tXARD, see above */
+		act_pd_exit_mclk = picos_to_mclk(tXP);
+		/* Mode register MR0[A12] is '1' - fast exit */
+		pre_pd_exit_mclk = act_pd_exit_mclk;
+		taxpd_mclk = 1;
+	}
+#else /* CONFIG_SYS_FSL_DDR2 */
+	/*
+	 * (tXARD and tXARDS). Empirical?
+	 * tXARD = 2 for DDR2
+	 * tXP=2
+	 * tAXPD=8
+	 */
+	act_pd_exit_mclk = 2;
+	pre_pd_exit_mclk = 2;
+	taxpd_mclk = 8;
+	tmrd_mclk = 2;
+#endif
+
+	if (popts->trwt_override)
+		trwt_mclk = popts->trwt;
+
+	ddr->timing_cfg_0 = (0
+		| ((trwt_mclk & 0x3) << 30)	/* RWT */
+		| ((twrt_mclk & 0x3) << 28)	/* WRT */
+		| ((trrt_mclk & 0x3) << 26)	/* RRT */
+		| ((twwt_mclk & 0x3) << 24)	/* WWT */
+		| ((act_pd_exit_mclk & 0xf) << 20)  /* ACT_PD_EXIT */
+		| ((pre_pd_exit_mclk & 0xF) << 16)  /* PRE_PD_EXIT */
+		| ((taxpd_mclk & 0xf) << 8)	/* ODT_PD_EXIT */
+		| ((tmrd_mclk & 0x1f) << 0)	/* MRS_CYC */
+		);
+	debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
+}
+#endif	/* defined(CONFIG_SYS_FSL_DDR2) */
+
+/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */
+static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
+			       const common_timing_params_t *common_dimm,
+			       unsigned int cas_latency,
+			       unsigned int additive_latency)
+{
+	/* Extended precharge to activate interval (tRP) */
+	unsigned int ext_pretoact = 0;
+	/* Extended Activate to precharge interval (tRAS) */
+	unsigned int ext_acttopre = 0;
+	/* Extended activate to read/write interval (tRCD) */
+	unsigned int ext_acttorw = 0;
+	/* Extended refresh recovery time (tRFC) */
+	unsigned int ext_refrec;
+	/* Extended MCAS latency from READ cmd */
+	unsigned int ext_caslat = 0;
+	/* Extended additive latency */
+	unsigned int ext_add_lat = 0;
+	/* Extended last data to precharge interval (tWR) */
+	unsigned int ext_wrrec = 0;
+	/* Control Adjust */
+	unsigned int cntl_adj = 0;
+
+	ext_pretoact = picos_to_mclk(common_dimm->trp_ps) >> 4;
+	ext_acttopre = picos_to_mclk(common_dimm->tras_ps) >> 4;
+	ext_acttorw = picos_to_mclk(common_dimm->trcd_ps) >> 4;
+	ext_caslat = (2 * cas_latency - 1) >> 4;
+	ext_add_lat = additive_latency >> 4;
+	ext_refrec = (picos_to_mclk(common_dimm->trfc_ps) - 8) >> 4;
+	/* ext_wrrec only deals with 16 clock and above, or 14 with OTF */
+	ext_wrrec = (picos_to_mclk(common_dimm->twr_ps) +
+		(popts->otf_burst_chop_en ? 2 : 0)) >> 4;
+
+	ddr->timing_cfg_3 = (0
+		| ((ext_pretoact & 0x1) << 28)
+		| ((ext_acttopre & 0x3) << 24)
+		| ((ext_acttorw & 0x1) << 22)
+		| ((ext_refrec & 0x1F) << 16)
+		| ((ext_caslat & 0x3) << 12)
+		| ((ext_add_lat & 0x1) << 10)
+		| ((ext_wrrec & 0x1) << 8)
+		| ((cntl_adj & 0x7) << 0)
+		);
+	debug("FSLDDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3);
+}
+
+/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */
+static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
+			       const common_timing_params_t *common_dimm,
+			       unsigned int cas_latency)
+{
+	/* Precharge-to-activate interval (tRP) */
+	unsigned char pretoact_mclk;
+	/* Activate to precharge interval (tRAS) */
+	unsigned char acttopre_mclk;
+	/*  Activate to read/write interval (tRCD) */
+	unsigned char acttorw_mclk;
+	/* CASLAT */
+	unsigned char caslat_ctrl;
+	/*  Refresh recovery time (tRFC) ; trfc_low */
+	unsigned char refrec_ctrl;
+	/* Last data to precharge minimum interval (tWR) */
+	unsigned char wrrec_mclk;
+	/* Activate-to-activate interval (tRRD) */
+	unsigned char acttoact_mclk;
+	/* Last write data pair to read command issue interval (tWTR) */
+	unsigned char wrtord_mclk;
+	/* DDR_SDRAM_MODE doesn't support 9,11,13,15 */
+	static const u8 wrrec_table[] = {
+		1, 2, 3, 4, 5, 6, 7, 8, 10, 10, 12, 12, 14, 14, 0, 0};
+
+	pretoact_mclk = picos_to_mclk(common_dimm->trp_ps);
+	acttopre_mclk = picos_to_mclk(common_dimm->tras_ps);
+	acttorw_mclk = picos_to_mclk(common_dimm->trcd_ps);
+
+	/*
+	 * Translate CAS Latency to a DDR controller field value:
+	 *
+	 *      CAS Lat DDR I   DDR II  Ctrl
+	 *      Clocks  SPD Bit SPD Bit Value
+	 *      ------- ------- ------- -----
+	 *      1.0     0               0001
+	 *      1.5     1               0010
+	 *      2.0     2       2       0011
+	 *      2.5     3               0100
+	 *      3.0     4       3       0101
+	 *      3.5     5               0110
+	 *      4.0             4       0111
+	 *      4.5                     1000
+	 *      5.0             5       1001
+	 */
+#if defined(CONFIG_SYS_FSL_DDR1)
+	caslat_ctrl = (cas_latency + 1) & 0x07;
+#elif defined(CONFIG_SYS_FSL_DDR2)
+	caslat_ctrl = 2 * cas_latency - 1;
+#else
+	/*
+	 * if the CAS latency more than 8 cycle,
+	 * we need set extend bit for it at
+	 * TIMING_CFG_3[EXT_CASLAT]
+	 */
+	caslat_ctrl = 2 * cas_latency - 1;
+#endif
+
+	refrec_ctrl = picos_to_mclk(common_dimm->trfc_ps) - 8;
+	wrrec_mclk = picos_to_mclk(common_dimm->twr_ps);
+
+	if (wrrec_mclk > 16)
+		printf("Error: WRREC doesn't support more than 16 clocks\n");
+	else
+		wrrec_mclk = wrrec_table[wrrec_mclk - 1];
+	if (popts->otf_burst_chop_en)
+		wrrec_mclk += 2;
+
+	acttoact_mclk = picos_to_mclk(common_dimm->trrd_ps);
+	/*
+	 * JEDEC has min requirement for tRRD
+	 */
+#if defined(CONFIG_SYS_FSL_DDR3)
+	if (acttoact_mclk < 4)
+		acttoact_mclk = 4;
+#endif
+	wrtord_mclk = picos_to_mclk(common_dimm->twtr_ps);
+	/*
+	 * JEDEC has some min requirements for tWTR
+	 */
+#if defined(CONFIG_SYS_FSL_DDR2)
+	if (wrtord_mclk < 2)
+		wrtord_mclk = 2;
+#elif defined(CONFIG_SYS_FSL_DDR3)
+	if (wrtord_mclk < 4)
+		wrtord_mclk = 4;
+#endif
+	if (popts->otf_burst_chop_en)
+		wrtord_mclk += 2;
+
+	ddr->timing_cfg_1 = (0
+		| ((pretoact_mclk & 0x0F) << 28)
+		| ((acttopre_mclk & 0x0F) << 24)
+		| ((acttorw_mclk & 0xF) << 20)
+		| ((caslat_ctrl & 0xF) << 16)
+		| ((refrec_ctrl & 0xF) << 12)
+		| ((wrrec_mclk & 0x0F) << 8)
+		| ((acttoact_mclk & 0x0F) << 4)
+		| ((wrtord_mclk & 0x0F) << 0)
+		);
+	debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
+}
+
+/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */
+static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
+			       const common_timing_params_t *common_dimm,
+			       unsigned int cas_latency,
+			       unsigned int additive_latency)
+{
+	/* Additive latency */
+	unsigned char add_lat_mclk;
+	/* CAS-to-preamble override */
+	unsigned short cpo;
+	/* Write latency */
+	unsigned char wr_lat;
+	/*  Read to precharge (tRTP) */
+	unsigned char rd_to_pre;
+	/* Write command to write data strobe timing adjustment */
+	unsigned char wr_data_delay;
+	/* Minimum CKE pulse width (tCKE) */
+	unsigned char cke_pls;
+	/* Window for four activates (tFAW) */
+	unsigned short four_act;
+
+	/* FIXME add check that this must be less than acttorw_mclk */
+	add_lat_mclk = additive_latency;
+	cpo = popts->cpo_override;
+
+#if defined(CONFIG_SYS_FSL_DDR1)
+	/*
+	 * This is a lie.  It should really be 1, but if it is
+	 * set to 1, bits overlap into the old controller's
+	 * otherwise unused ACSM field.  If we leave it 0, then
+	 * the HW will magically treat it as 1 for DDR 1.  Oh Yea.
+	 */
+	wr_lat = 0;
+#elif defined(CONFIG_SYS_FSL_DDR2)
+	wr_lat = cas_latency - 1;
+#else
+	wr_lat = compute_cas_write_latency();
+#endif
+
+	rd_to_pre = picos_to_mclk(common_dimm->trtp_ps);
+	/*
+	 * JEDEC has some min requirements for tRTP
+	 */
+#if defined(CONFIG_SYS_FSL_DDR2)
+	if (rd_to_pre  < 2)
+		rd_to_pre  = 2;
+#elif defined(CONFIG_SYS_FSL_DDR3)
+	if (rd_to_pre < 4)
+		rd_to_pre = 4;
+#endif
+	if (popts->otf_burst_chop_en)
+		rd_to_pre += 2; /* according to UM */
+
+	wr_data_delay = popts->write_data_delay;
+	cke_pls = picos_to_mclk(popts->tcke_clock_pulse_width_ps);
+	four_act = picos_to_mclk(popts->tfaw_window_four_activates_ps);
+
+	ddr->timing_cfg_2 = (0
+		| ((add_lat_mclk & 0xf) << 28)
+		| ((cpo & 0x1f) << 23)
+		| ((wr_lat & 0xf) << 19)
+		| ((rd_to_pre & RD_TO_PRE_MASK) << RD_TO_PRE_SHIFT)
+		| ((wr_data_delay & WR_DATA_DELAY_MASK) << WR_DATA_DELAY_SHIFT)
+		| ((cke_pls & 0x7) << 6)
+		| ((four_act & 0x3f) << 0)
+		);
+	debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
+}
+
+/* DDR SDRAM Register Control Word */
+static void set_ddr_sdram_rcw(fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
+			       const common_timing_params_t *common_dimm)
+{
+	if (common_dimm->all_dimms_registered &&
+	    !common_dimm->all_dimms_unbuffered)	{
+		if (popts->rcw_override) {
+			ddr->ddr_sdram_rcw_1 = popts->rcw_1;
+			ddr->ddr_sdram_rcw_2 = popts->rcw_2;
+		} else {
+			ddr->ddr_sdram_rcw_1 =
+				common_dimm->rcw[0] << 28 | \
+				common_dimm->rcw[1] << 24 | \
+				common_dimm->rcw[2] << 20 | \
+				common_dimm->rcw[3] << 16 | \
+				common_dimm->rcw[4] << 12 | \
+				common_dimm->rcw[5] << 8 | \
+				common_dimm->rcw[6] << 4 | \
+				common_dimm->rcw[7];
+			ddr->ddr_sdram_rcw_2 =
+				common_dimm->rcw[8] << 28 | \
+				common_dimm->rcw[9] << 24 | \
+				common_dimm->rcw[10] << 20 | \
+				common_dimm->rcw[11] << 16 | \
+				common_dimm->rcw[12] << 12 | \
+				common_dimm->rcw[13] << 8 | \
+				common_dimm->rcw[14] << 4 | \
+				common_dimm->rcw[15];
+		}
+		debug("FSLDDR: ddr_sdram_rcw_1 = 0x%08x\n", ddr->ddr_sdram_rcw_1);
+		debug("FSLDDR: ddr_sdram_rcw_2 = 0x%08x\n", ddr->ddr_sdram_rcw_2);
+	}
+}
+
+/* DDR SDRAM control configuration (DDR_SDRAM_CFG) */
+static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
+			       const common_timing_params_t *common_dimm)
+{
+	unsigned int mem_en;		/* DDR SDRAM interface logic enable */
+	unsigned int sren;		/* Self refresh enable (during sleep) */
+	unsigned int ecc_en;		/* ECC enable. */
+	unsigned int rd_en;		/* Registered DIMM enable */
+	unsigned int sdram_type;	/* Type of SDRAM */
+	unsigned int dyn_pwr;		/* Dynamic power management mode */
+	unsigned int dbw;		/* DRAM dta bus width */
+	unsigned int eight_be = 0;	/* 8-beat burst enable, DDR2 is zero */
+	unsigned int ncap = 0;		/* Non-concurrent auto-precharge */
+	unsigned int threet_en;		/* Enable 3T timing */
+	unsigned int twot_en;		/* Enable 2T timing */
+	unsigned int ba_intlv_ctl;	/* Bank (CS) interleaving control */
+	unsigned int x32_en = 0;	/* x32 enable */
+	unsigned int pchb8 = 0;		/* precharge bit 8 enable */
+	unsigned int hse;		/* Global half strength override */
+	unsigned int mem_halt = 0;	/* memory controller halt */
+	unsigned int bi = 0;		/* Bypass initialization */
+
+	mem_en = 1;
+	sren = popts->self_refresh_in_sleep;
+	if (common_dimm->all_dimms_ecc_capable) {
+		/* Allow setting of ECC only if all DIMMs are ECC. */
+		ecc_en = popts->ecc_mode;
+	} else {
+		ecc_en = 0;
+	}
+
+	if (common_dimm->all_dimms_registered &&
+	    !common_dimm->all_dimms_unbuffered)	{
+		rd_en = 1;
+		twot_en = 0;
+	} else {
+		rd_en = 0;
+		twot_en = popts->twot_en;
+	}
+
+	sdram_type = CONFIG_FSL_SDRAM_TYPE;
+
+	dyn_pwr = popts->dynamic_power;
+	dbw = popts->data_bus_width;
+	/* 8-beat burst enable DDR-III case
+	 * we must clear it when use the on-the-fly mode,
+	 * must set it when use the 32-bits bus mode.
+	 */
+	if (sdram_type == SDRAM_TYPE_DDR3) {
+		if (popts->burst_length == DDR_BL8)
+			eight_be = 1;
+		if (popts->burst_length == DDR_OTF)
+			eight_be = 0;
+		if (dbw == 0x1)
+			eight_be = 1;
+	}
+
+	threet_en = popts->threet_en;
+	ba_intlv_ctl = popts->ba_intlv_ctl;
+	hse = popts->half_strength_driver_enable;
+
+	ddr->ddr_sdram_cfg = (0
+			| ((mem_en & 0x1) << 31)
+			| ((sren & 0x1) << 30)
+			| ((ecc_en & 0x1) << 29)
+			| ((rd_en & 0x1) << 28)
+			| ((sdram_type & 0x7) << 24)
+			| ((dyn_pwr & 0x1) << 21)
+			| ((dbw & 0x3) << 19)
+			| ((eight_be & 0x1) << 18)
+			| ((ncap & 0x1) << 17)
+			| ((threet_en & 0x1) << 16)
+			| ((twot_en & 0x1) << 15)
+			| ((ba_intlv_ctl & 0x7F) << 8)
+			| ((x32_en & 0x1) << 5)
+			| ((pchb8 & 0x1) << 4)
+			| ((hse & 0x1) << 3)
+			| ((mem_halt & 0x1) << 1)
+			| ((bi & 0x1) << 0)
+			);
+	debug("FSLDDR: ddr_sdram_cfg = 0x%08x\n", ddr->ddr_sdram_cfg);
+}
+
+/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
+static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
+			       const unsigned int unq_mrs_en)
+{
+	unsigned int frc_sr = 0;	/* Force self refresh */
+	unsigned int sr_ie = 0;		/* Self-refresh interrupt enable */
+	unsigned int dll_rst_dis;	/* DLL reset disable */
+	unsigned int dqs_cfg;		/* DQS configuration */
+	unsigned int odt_cfg = 0;	/* ODT configuration */
+	unsigned int num_pr;		/* Number of posted refreshes */
+	unsigned int slow = 0;		/* DDR will be run less than 1250 */
+	unsigned int x4_en = 0;		/* x4 DRAM enable */
+	unsigned int obc_cfg;		/* On-The-Fly Burst Chop Cfg */
+	unsigned int ap_en;		/* Address Parity Enable */
+	unsigned int d_init;		/* DRAM data initialization */
+	unsigned int rcw_en = 0;	/* Register Control Word Enable */
+	unsigned int md_en = 0;		/* Mirrored DIMM Enable */
+	unsigned int qd_en = 0;		/* quad-rank DIMM Enable */
+	int i;
+
+	dll_rst_dis = 1;	/* Make this configurable */
+	dqs_cfg = popts->dqs_config;
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (popts->cs_local_opts[i].odt_rd_cfg
+			|| popts->cs_local_opts[i].odt_wr_cfg) {
+			odt_cfg = SDRAM_CFG2_ODT_ONLY_READ;
+			break;
+		}
+	}
+
+	num_pr = 1;	/* Make this configurable */
+
+	/*
+	 * 8572 manual says
+	 *     {TIMING_CFG_1[PRETOACT]
+	 *      + [DDR_SDRAM_CFG_2[NUM_PR]
+	 *        * ({EXT_REFREC || REFREC} + 8 + 2)]}
+	 *      << DDR_SDRAM_INTERVAL[REFINT]
+	 */
+#if defined(CONFIG_SYS_FSL_DDR3)
+	obc_cfg = popts->otf_burst_chop_en;
+#else
+	obc_cfg = 0;
+#endif
+
+#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)
+	slow = get_ddr_freq(0) < 1249000000;
+#endif
+
+	if (popts->registered_dimm_en) {
+		rcw_en = 1;
+		ap_en = popts->ap_en;
+	} else {
+		ap_en = 0;
+	}
+
+	x4_en = popts->x4_en ? 1 : 0;
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/* Use the DDR controller to auto initialize memory. */
+	d_init = popts->ecc_init_using_memctl;
+	ddr->ddr_data_init = CONFIG_MEM_INIT_VALUE;
+	debug("DDR: ddr_data_init = 0x%08x\n", ddr->ddr_data_init);
+#else
+	/* Memory will be initialized via DMA, or not at all. */
+	d_init = 0;
+#endif
+
+#if defined(CONFIG_SYS_FSL_DDR3)
+	md_en = popts->mirrored_dimm;
+#endif
+	qd_en = popts->quad_rank_present ? 1 : 0;
+	ddr->ddr_sdram_cfg_2 = (0
+		| ((frc_sr & 0x1) << 31)
+		| ((sr_ie & 0x1) << 30)
+		| ((dll_rst_dis & 0x1) << 29)
+		| ((dqs_cfg & 0x3) << 26)
+		| ((odt_cfg & 0x3) << 21)
+		| ((num_pr & 0xf) << 12)
+		| ((slow & 1) << 11)
+		| (x4_en << 10)
+		| (qd_en << 9)
+		| (unq_mrs_en << 8)
+		| ((obc_cfg & 0x1) << 6)
+		| ((ap_en & 0x1) << 5)
+		| ((d_init & 0x1) << 4)
+		| ((rcw_en & 0x1) << 2)
+		| ((md_en & 0x1) << 0)
+		);
+	debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2);
+}
+
+/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
+static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
+				const memctl_options_t *popts,
+				const common_timing_params_t *common_dimm,
+				const unsigned int unq_mrs_en)
+{
+	unsigned short esdmode2 = 0;	/* Extended SDRAM mode 2 */
+	unsigned short esdmode3 = 0;	/* Extended SDRAM mode 3 */
+
+#if defined(CONFIG_SYS_FSL_DDR3)
+	int i;
+	unsigned int rtt_wr = 0;	/* Rtt_WR - dynamic ODT off */
+	unsigned int srt = 0;	/* self-refresh temerature, normal range */
+	unsigned int asr = 0;	/* auto self-refresh disable */
+	unsigned int cwl = compute_cas_write_latency() - 5;
+	unsigned int pasr = 0;	/* partial array self refresh disable */
+
+	if (popts->rtt_override)
+		rtt_wr = popts->rtt_wr_override_value;
+	else
+		rtt_wr = popts->cs_local_opts[0].odt_rtt_wr;
+
+	if (common_dimm->extended_op_srt)
+		srt = common_dimm->extended_op_srt;
+
+	esdmode2 = (0
+		| ((rtt_wr & 0x3) << 9)
+		| ((srt & 0x1) << 7)
+		| ((asr & 0x1) << 6)
+		| ((cwl & 0x7) << 3)
+		| ((pasr & 0x7) << 0));
+#endif
+	ddr->ddr_sdram_mode_2 = (0
+				 | ((esdmode2 & 0xFFFF) << 16)
+				 | ((esdmode3 & 0xFFFF) << 0)
+				 );
+	debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2);
+
+#ifdef CONFIG_SYS_FSL_DDR3
+	if (unq_mrs_en) {	/* unique mode registers are supported */
+		for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+			if (popts->rtt_override)
+				rtt_wr = popts->rtt_wr_override_value;
+			else
+				rtt_wr = popts->cs_local_opts[i].odt_rtt_wr;
+
+			esdmode2 &= 0xF9FF;	/* clear bit 10, 9 */
+			esdmode2 |= (rtt_wr & 0x3) << 9;
+			switch (i) {
+			case 1:
+				ddr->ddr_sdram_mode_4 = (0
+					| ((esdmode2 & 0xFFFF) << 16)
+					| ((esdmode3 & 0xFFFF) << 0)
+					);
+				break;
+			case 2:
+				ddr->ddr_sdram_mode_6 = (0
+					| ((esdmode2 & 0xFFFF) << 16)
+					| ((esdmode3 & 0xFFFF) << 0)
+					);
+				break;
+			case 3:
+				ddr->ddr_sdram_mode_8 = (0
+					| ((esdmode2 & 0xFFFF) << 16)
+					| ((esdmode3 & 0xFFFF) << 0)
+					);
+				break;
+			}
+		}
+		debug("FSLDDR: ddr_sdram_mode_4 = 0x%08x\n",
+			ddr->ddr_sdram_mode_4);
+		debug("FSLDDR: ddr_sdram_mode_6 = 0x%08x\n",
+			ddr->ddr_sdram_mode_6);
+		debug("FSLDDR: ddr_sdram_mode_8 = 0x%08x\n",
+			ddr->ddr_sdram_mode_8);
+	}
+#endif
+}
+
+/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
+static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
+			       const common_timing_params_t *common_dimm)
+{
+	unsigned int refint;	/* Refresh interval */
+	unsigned int bstopre;	/* Precharge interval */
+
+	refint = picos_to_mclk(common_dimm->refresh_rate_ps);
+
+	bstopre = popts->bstopre;
+
+	/* refint field used 0x3FFF in earlier controllers */
+	ddr->ddr_sdram_interval = (0
+				   | ((refint & 0xFFFF) << 16)
+				   | ((bstopre & 0x3FFF) << 0)
+				   );
+	debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval);
+}
+
+#if defined(CONFIG_SYS_FSL_DDR3)
+/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
+static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
+			       const common_timing_params_t *common_dimm,
+			       unsigned int cas_latency,
+			       unsigned int additive_latency,
+			       const unsigned int unq_mrs_en)
+{
+	unsigned short esdmode;		/* Extended SDRAM mode */
+	unsigned short sdmode;		/* SDRAM mode */
+
+	/* Mode Register - MR1 */
+	unsigned int qoff = 0;		/* Output buffer enable 0=yes, 1=no */
+	unsigned int tdqs_en = 0;	/* TDQS Enable: 0=no, 1=yes */
+	unsigned int rtt;
+	unsigned int wrlvl_en = 0;	/* Write level enable: 0=no, 1=yes */
+	unsigned int al = 0;		/* Posted CAS# additive latency (AL) */
+	unsigned int dic = 0;		/* Output driver impedance, 40ohm */
+	unsigned int dll_en = 0;	/* DLL Enable  0=Enable (Normal),
+						       1=Disable (Test/Debug) */
+
+	/* Mode Register - MR0 */
+	unsigned int dll_on;	/* DLL control for precharge PD, 0=off, 1=on */
+	unsigned int wr = 0;	/* Write Recovery */
+	unsigned int dll_rst;	/* DLL Reset */
+	unsigned int mode;	/* Normal=0 or Test=1 */
+	unsigned int caslat = 4;/* CAS# latency, default set as 6 cycles */
+	/* BT: Burst Type (0=Nibble Sequential, 1=Interleaved) */
+	unsigned int bt;
+	unsigned int bl;	/* BL: Burst Length */
+
+	unsigned int wr_mclk;
+	/*
+	 * DDR_SDRAM_MODE doesn't support 9,11,13,15
+	 * Please refer JEDEC Standard No. 79-3E for Mode Register MR0
+	 * for this table
+	 */
+	static const u8 wr_table[] = {1, 2, 3, 4, 5, 5, 6, 6, 7, 7, 0, 0};
+
+	const unsigned int mclk_ps = get_memory_clk_period_ps();
+	int i;
+
+	if (popts->rtt_override)
+		rtt = popts->rtt_override_value;
+	else
+		rtt = popts->cs_local_opts[0].odt_rtt_norm;
+
+	if (additive_latency == (cas_latency - 1))
+		al = 1;
+	if (additive_latency == (cas_latency - 2))
+		al = 2;
+
+	if (popts->quad_rank_present)
+		dic = 1;	/* output driver impedance 240/7 ohm */
+
+	/*
+	 * The esdmode value will also be used for writing
+	 * MR1 during write leveling for DDR3, although the
+	 * bits specifically related to the write leveling
+	 * scheme will be handled automatically by the DDR
+	 * controller. so we set the wrlvl_en = 0 here.
+	 */
+	esdmode = (0
+		| ((qoff & 0x1) << 12)
+		| ((tdqs_en & 0x1) << 11)
+		| ((rtt & 0x4) << 7)   /* rtt field is split */
+		| ((wrlvl_en & 0x1) << 7)
+		| ((rtt & 0x2) << 5)   /* rtt field is split */
+		| ((dic & 0x2) << 4)   /* DIC field is split */
+		| ((al & 0x3) << 3)
+		| ((rtt & 0x1) << 2)  /* rtt field is split */
+		| ((dic & 0x1) << 1)   /* DIC field is split */
+		| ((dll_en & 0x1) << 0)
+		);
+
+	/*
+	 * DLL control for precharge PD
+	 * 0=slow exit DLL off (tXPDLL)
+	 * 1=fast exit DLL on (tXP)
+	 */
+	dll_on = 1;
+
+	wr_mclk = (common_dimm->twr_ps + mclk_ps - 1) / mclk_ps;
+	if (wr_mclk <= 16) {
+		wr = wr_table[wr_mclk - 5];
+	} else {
+		printf("Error: unsupported write recovery for mode register "
+		       "wr_mclk = %d\n", wr_mclk);
+	}
+
+	dll_rst = 0;	/* dll no reset */
+	mode = 0;	/* normal mode */
+
+	/* look up table to get the cas latency bits */
+	if (cas_latency >= 5 && cas_latency <= 16) {
+		unsigned char cas_latency_table[] = {
+			0x2,	/* 5 clocks */
+			0x4,	/* 6 clocks */
+			0x6,	/* 7 clocks */
+			0x8,	/* 8 clocks */
+			0xa,	/* 9 clocks */
+			0xc,	/* 10 clocks */
+			0xe,	/* 11 clocks */
+			0x1,	/* 12 clocks */
+			0x3,	/* 13 clocks */
+			0x5,	/* 14 clocks */
+			0x7,	/* 15 clocks */
+			0x9,	/* 16 clocks */
+		};
+		caslat = cas_latency_table[cas_latency - 5];
+	} else {
+		printf("Error: unsupported cas latency for mode register\n");
+	}
+
+	bt = 0;	/* Nibble sequential */
+
+	switch (popts->burst_length) {
+	case DDR_BL8:
+		bl = 0;
+		break;
+	case DDR_OTF:
+		bl = 1;
+		break;
+	case DDR_BC4:
+		bl = 2;
+		break;
+	default:
+		printf("Error: invalid burst length of %u specified. "
+			" Defaulting to on-the-fly BC4 or BL8 beats.\n",
+			popts->burst_length);
+		bl = 1;
+		break;
+	}
+
+	sdmode = (0
+		  | ((dll_on & 0x1) << 12)
+		  | ((wr & 0x7) << 9)
+		  | ((dll_rst & 0x1) << 8)
+		  | ((mode & 0x1) << 7)
+		  | (((caslat >> 1) & 0x7) << 4)
+		  | ((bt & 0x1) << 3)
+		  | ((caslat & 1) << 2)
+		  | ((bl & 0x3) << 0)
+		  );
+
+	ddr->ddr_sdram_mode = (0
+			       | ((esdmode & 0xFFFF) << 16)
+			       | ((sdmode & 0xFFFF) << 0)
+			       );
+
+	debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
+
+	if (unq_mrs_en) {	/* unique mode registers are supported */
+		for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+			if (popts->rtt_override)
+				rtt = popts->rtt_override_value;
+			else
+				rtt = popts->cs_local_opts[i].odt_rtt_norm;
+
+			esdmode &= 0xFDBB;	/* clear bit 9,6,2 */
+			esdmode |= (0
+				| ((rtt & 0x4) << 7)   /* rtt field is split */
+				| ((rtt & 0x2) << 5)   /* rtt field is split */
+				| ((rtt & 0x1) << 2)  /* rtt field is split */
+				);
+			switch (i) {
+			case 1:
+				ddr->ddr_sdram_mode_3 = (0
+				       | ((esdmode & 0xFFFF) << 16)
+				       | ((sdmode & 0xFFFF) << 0)
+				       );
+				break;
+			case 2:
+				ddr->ddr_sdram_mode_5 = (0
+				       | ((esdmode & 0xFFFF) << 16)
+				       | ((sdmode & 0xFFFF) << 0)
+				       );
+				break;
+			case 3:
+				ddr->ddr_sdram_mode_7 = (0
+				       | ((esdmode & 0xFFFF) << 16)
+				       | ((sdmode & 0xFFFF) << 0)
+				       );
+				break;
+			}
+		}
+		debug("FSLDDR: ddr_sdram_mode_3 = 0x%08x\n",
+			ddr->ddr_sdram_mode_3);
+		debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n",
+			ddr->ddr_sdram_mode_5);
+		debug("FSLDDR: ddr_sdram_mode_5 = 0x%08x\n",
+			ddr->ddr_sdram_mode_5);
+	}
+}
+
+#else /* !CONFIG_SYS_FSL_DDR3 */
+
+/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
+static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
+			       const common_timing_params_t *common_dimm,
+			       unsigned int cas_latency,
+			       unsigned int additive_latency,
+			       const unsigned int unq_mrs_en)
+{
+	unsigned short esdmode;		/* Extended SDRAM mode */
+	unsigned short sdmode;		/* SDRAM mode */
+
+	/*
+	 * FIXME: This ought to be pre-calculated in a
+	 * technology-specific routine,
+	 * e.g. compute_DDR2_mode_register(), and then the
+	 * sdmode and esdmode passed in as part of common_dimm.
+	 */
+
+	/* Extended Mode Register */
+	unsigned int mrs = 0;		/* Mode Register Set */
+	unsigned int outputs = 0;	/* 0=Enabled, 1=Disabled */
+	unsigned int rdqs_en = 0;	/* RDQS Enable: 0=no, 1=yes */
+	unsigned int dqs_en = 0;	/* DQS# Enable: 0=enable, 1=disable */
+	unsigned int ocd = 0;		/* 0x0=OCD not supported,
+					   0x7=OCD default state */
+	unsigned int rtt;
+	unsigned int al;		/* Posted CAS# additive latency (AL) */
+	unsigned int ods = 0;		/* Output Drive Strength:
+						0 = Full strength (18ohm)
+						1 = Reduced strength (4ohm) */
+	unsigned int dll_en = 0;	/* DLL Enable  0=Enable (Normal),
+						       1=Disable (Test/Debug) */
+
+	/* Mode Register (MR) */
+	unsigned int mr;	/* Mode Register Definition */
+	unsigned int pd;	/* Power-Down Mode */
+	unsigned int wr;	/* Write Recovery */
+	unsigned int dll_res;	/* DLL Reset */
+	unsigned int mode;	/* Normal=0 or Test=1 */
+	unsigned int caslat = 0;/* CAS# latency */
+	/* BT: Burst Type (0=Sequential, 1=Interleaved) */
+	unsigned int bt;
+	unsigned int bl;	/* BL: Burst Length */
+
+#if defined(CONFIG_SYS_FSL_DDR2)
+	const unsigned int mclk_ps = get_memory_clk_period_ps();
+#endif
+	dqs_en = !popts->dqs_config;
+	rtt = fsl_ddr_get_rtt();
+
+	al = additive_latency;
+
+	esdmode = (0
+		| ((mrs & 0x3) << 14)
+		| ((outputs & 0x1) << 12)
+		| ((rdqs_en & 0x1) << 11)
+		| ((dqs_en & 0x1) << 10)
+		| ((ocd & 0x7) << 7)
+		| ((rtt & 0x2) << 5)   /* rtt field is split */
+		| ((al & 0x7) << 3)
+		| ((rtt & 0x1) << 2)   /* rtt field is split */
+		| ((ods & 0x1) << 1)
+		| ((dll_en & 0x1) << 0)
+		);
+
+	mr = 0;		 /* FIXME: CHECKME */
+
+	/*
+	 * 0 = Fast Exit (Normal)
+	 * 1 = Slow Exit (Low Power)
+	 */
+	pd = 0;
+
+#if defined(CONFIG_SYS_FSL_DDR1)
+	wr = 0;       /* Historical */
+#elif defined(CONFIG_SYS_FSL_DDR2)
+	wr = (common_dimm->twr_ps + mclk_ps - 1) / mclk_ps - 1;
+#endif
+	dll_res = 0;
+	mode = 0;
+
+#if defined(CONFIG_SYS_FSL_DDR1)
+	if (1 <= cas_latency && cas_latency <= 4) {
+		unsigned char mode_caslat_table[4] = {
+			0x5,	/* 1.5 clocks */
+			0x2,	/* 2.0 clocks */
+			0x6,	/* 2.5 clocks */
+			0x3	/* 3.0 clocks */
+		};
+		caslat = mode_caslat_table[cas_latency - 1];
+	} else {
+		printf("Warning: unknown cas_latency %d\n", cas_latency);
+	}
+#elif defined(CONFIG_SYS_FSL_DDR2)
+	caslat = cas_latency;
+#endif
+	bt = 0;
+
+	switch (popts->burst_length) {
+	case DDR_BL4:
+		bl = 2;
+		break;
+	case DDR_BL8:
+		bl = 3;
+		break;
+	default:
+		printf("Error: invalid burst length of %u specified. "
+			" Defaulting to 4 beats.\n",
+			popts->burst_length);
+		bl = 2;
+		break;
+	}
+
+	sdmode = (0
+		  | ((mr & 0x3) << 14)
+		  | ((pd & 0x1) << 12)
+		  | ((wr & 0x7) << 9)
+		  | ((dll_res & 0x1) << 8)
+		  | ((mode & 0x1) << 7)
+		  | ((caslat & 0x7) << 4)
+		  | ((bt & 0x1) << 3)
+		  | ((bl & 0x7) << 0)
+		  );
+
+	ddr->ddr_sdram_mode = (0
+			       | ((esdmode & 0xFFFF) << 16)
+			       | ((sdmode & 0xFFFF) << 0)
+			       );
+	debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
+}
+#endif
+
+/* DDR SDRAM Data Initialization (DDR_DATA_INIT) */
+static void set_ddr_data_init(fsl_ddr_cfg_regs_t *ddr)
+{
+	unsigned int init_value;	/* Initialization value */
+
+#ifdef CONFIG_MEM_INIT_VALUE
+	init_value = CONFIG_MEM_INIT_VALUE;
+#else
+	init_value = 0xDEADBEEF;
+#endif
+	ddr->ddr_data_init = init_value;
+}
+
+/*
+ * DDR SDRAM Clock Control (DDR_SDRAM_CLK_CNTL)
+ * The old controller on the 8540/60 doesn't have this register.
+ * Hope it's OK to set it (to 0) anyway.
+ */
+static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr,
+					 const memctl_options_t *popts)
+{
+	unsigned int clk_adjust;	/* Clock adjust */
+
+	clk_adjust = popts->clk_adjust;
+	ddr->ddr_sdram_clk_cntl = (clk_adjust & 0xF) << 23;
+	debug("FSLDDR: clk_cntl = 0x%08x\n", ddr->ddr_sdram_clk_cntl);
+}
+
+/* DDR Initialization Address (DDR_INIT_ADDR) */
+static void set_ddr_init_addr(fsl_ddr_cfg_regs_t *ddr)
+{
+	unsigned int init_addr = 0;	/* Initialization address */
+
+	ddr->ddr_init_addr = init_addr;
+}
+
+/* DDR Initialization Address (DDR_INIT_EXT_ADDR) */
+static void set_ddr_init_ext_addr(fsl_ddr_cfg_regs_t *ddr)
+{
+	unsigned int uia = 0;	/* Use initialization address */
+	unsigned int init_ext_addr = 0;	/* Initialization address */
+
+	ddr->ddr_init_ext_addr = (0
+				  | ((uia & 0x1) << 31)
+				  | (init_ext_addr & 0xF)
+				  );
+}
+
+/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */
+static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr,
+				const memctl_options_t *popts)
+{
+	unsigned int rwt = 0; /* Read-to-write turnaround for same CS */
+	unsigned int wrt = 0; /* Write-to-read turnaround for same CS */
+	unsigned int rrt = 0; /* Read-to-read turnaround for same CS */
+	unsigned int wwt = 0; /* Write-to-write turnaround for same CS */
+	unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */
+
+#if defined(CONFIG_SYS_FSL_DDR3)
+	if (popts->burst_length == DDR_BL8) {
+		/* We set BL/2 for fixed BL8 */
+		rrt = 0;	/* BL/2 clocks */
+		wwt = 0;	/* BL/2 clocks */
+	} else {
+		/* We need to set BL/2 + 2 to BC4 and OTF */
+		rrt = 2;	/* BL/2 + 2 clocks */
+		wwt = 2;	/* BL/2 + 2 clocks */
+	}
+	dll_lock = 1;	/* tDLLK = 512 clocks from spec */
+#endif
+	ddr->timing_cfg_4 = (0
+			     | ((rwt & 0xf) << 28)
+			     | ((wrt & 0xf) << 24)
+			     | ((rrt & 0xf) << 20)
+			     | ((wwt & 0xf) << 16)
+			     | (dll_lock & 0x3)
+			     );
+	debug("FSLDDR: timing_cfg_4 = 0x%08x\n", ddr->timing_cfg_4);
+}
+
+/* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */
+static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr, unsigned int cas_latency)
+{
+	unsigned int rodt_on = 0;	/* Read to ODT on */
+	unsigned int rodt_off = 0;	/* Read to ODT off */
+	unsigned int wodt_on = 0;	/* Write to ODT on */
+	unsigned int wodt_off = 0;	/* Write to ODT off */
+
+#if defined(CONFIG_SYS_FSL_DDR3)
+	/* rodt_on = timing_cfg_1[caslat] - timing_cfg_2[wrlat] + 1 */
+	rodt_on = cas_latency - ((ddr->timing_cfg_2 & 0x00780000) >> 19) + 1;
+	rodt_off = 4;	/*  4 clocks */
+	wodt_on = 1;	/*  1 clocks */
+	wodt_off = 4;	/*  4 clocks */
+#endif
+
+	ddr->timing_cfg_5 = (0
+			     | ((rodt_on & 0x1f) << 24)
+			     | ((rodt_off & 0x7) << 20)
+			     | ((wodt_on & 0x1f) << 12)
+			     | ((wodt_off & 0x7) << 8)
+			     );
+	debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5);
+}
+
+/* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */
+static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int zq_en)
+{
+	unsigned int zqinit = 0;/* POR ZQ Calibration Time (tZQinit) */
+	/* Normal Operation Full Calibration Time (tZQoper) */
+	unsigned int zqoper = 0;
+	/* Normal Operation Short Calibration Time (tZQCS) */
+	unsigned int zqcs = 0;
+
+	if (zq_en) {
+		zqinit = 9;	/* 512 clocks */
+		zqoper = 8;	/* 256 clocks */
+		zqcs = 6;	/* 64 clocks */
+	}
+
+	ddr->ddr_zq_cntl = (0
+			    | ((zq_en & 0x1) << 31)
+			    | ((zqinit & 0xF) << 24)
+			    | ((zqoper & 0xF) << 16)
+			    | ((zqcs & 0xF) << 8)
+			    );
+	debug("FSLDDR: zq_cntl = 0x%08x\n", ddr->ddr_zq_cntl);
+}
+
+/* DDR Write Leveling Control (DDR_WRLVL_CNTL) */
+static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en,
+				const memctl_options_t *popts)
+{
+	/*
+	 * First DQS pulse rising edge after margining mode
+	 * is programmed (tWL_MRD)
+	 */
+	unsigned int wrlvl_mrd = 0;
+	/* ODT delay after margining mode is programmed (tWL_ODTEN) */
+	unsigned int wrlvl_odten = 0;
+	/* DQS/DQS_ delay after margining mode is programmed (tWL_DQSEN) */
+	unsigned int wrlvl_dqsen = 0;
+	/* WRLVL_SMPL: Write leveling sample time */
+	unsigned int wrlvl_smpl = 0;
+	/* WRLVL_WLR: Write leveling repeition time */
+	unsigned int wrlvl_wlr = 0;
+	/* WRLVL_START: Write leveling start time */
+	unsigned int wrlvl_start = 0;
+
+	/* suggest enable write leveling for DDR3 due to fly-by topology */
+	if (wrlvl_en) {
+		/* tWL_MRD min = 40 nCK, we set it 64 */
+		wrlvl_mrd = 0x6;
+		/* tWL_ODTEN 128 */
+		wrlvl_odten = 0x7;
+		/* tWL_DQSEN min = 25 nCK, we set it 32 */
+		wrlvl_dqsen = 0x5;
+		/*
+		 * Write leveling sample time at least need 6 clocks
+		 * higher than tWLO to allow enough time for progagation
+		 * delay and sampling the prime data bits.
+		 */
+		wrlvl_smpl = 0xf;
+		/*
+		 * Write leveling repetition time
+		 * at least tWLO + 6 clocks clocks
+		 * we set it 64
+		 */
+		wrlvl_wlr = 0x6;
+		/*
+		 * Write leveling start time
+		 * The value use for the DQS_ADJUST for the first sample
+		 * when write leveling is enabled. It probably needs to be
+		 * overriden per platform.
+		 */
+		wrlvl_start = 0x8;
+		/*
+		 * Override the write leveling sample and start time
+		 * according to specific board
+		 */
+		if (popts->wrlvl_override) {
+			wrlvl_smpl = popts->wrlvl_sample;
+			wrlvl_start = popts->wrlvl_start;
+		}
+	}
+
+	ddr->ddr_wrlvl_cntl = (0
+			       | ((wrlvl_en & 0x1) << 31)
+			       | ((wrlvl_mrd & 0x7) << 24)
+			       | ((wrlvl_odten & 0x7) << 20)
+			       | ((wrlvl_dqsen & 0x7) << 16)
+			       | ((wrlvl_smpl & 0xf) << 12)
+			       | ((wrlvl_wlr & 0x7) << 8)
+			       | ((wrlvl_start & 0x1F) << 0)
+			       );
+	debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl);
+	ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2;
+	debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2);
+	ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3;
+	debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3);
+
+}
+
+/* DDR Self Refresh Counter (DDR_SR_CNTR) */
+static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr, unsigned int sr_it)
+{
+	/* Self Refresh Idle Threshold */
+	ddr->ddr_sr_cntr = (sr_it & 0xF) << 16;
+}
+
+static void set_ddr_eor(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
+{
+	if (popts->addr_hash) {
+		ddr->ddr_eor = 0x40000000;	/* address hash enable */
+		puts("Address hashing enabled.\n");
+	}
+}
+
+static void set_ddr_cdr1(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
+{
+	ddr->ddr_cdr1 = popts->ddr_cdr1;
+	debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1);
+}
+
+static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
+{
+	ddr->ddr_cdr2 = popts->ddr_cdr2;
+	debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2);
+}
+
+unsigned int
+check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
+{
+	unsigned int res = 0;
+
+	/*
+	 * Check that DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] are
+	 * not set at the same time.
+	 */
+	if (ddr->ddr_sdram_cfg & 0x10000000
+	    && ddr->ddr_sdram_cfg & 0x00008000) {
+		printf("Error: DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] "
+				" should not be set at the same time.\n");
+		res++;
+	}
+
+	return res;
+}
+
+unsigned int
+compute_fsl_memctl_config_regs(const memctl_options_t *popts,
+			       fsl_ddr_cfg_regs_t *ddr,
+			       const common_timing_params_t *common_dimm,
+			       const dimm_params_t *dimm_params,
+			       unsigned int dbw_cap_adj,
+			       unsigned int size_only)
+{
+	unsigned int i;
+	unsigned int cas_latency;
+	unsigned int additive_latency;
+	unsigned int sr_it;
+	unsigned int zq_en;
+	unsigned int wrlvl_en;
+	unsigned int ip_rev = 0;
+	unsigned int unq_mrs_en = 0;
+	int cs_en = 1;
+
+	memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t));
+
+	if (common_dimm == NULL) {
+		printf("Error: subset DIMM params struct null pointer\n");
+		return 1;
+	}
+
+	/*
+	 * Process overrides first.
+	 *
+	 * FIXME: somehow add dereated caslat to this
+	 */
+	cas_latency = (popts->cas_latency_override)
+		? popts->cas_latency_override_value
+		: common_dimm->lowest_common_SPD_caslat;
+
+	additive_latency = (popts->additive_latency_override)
+		? popts->additive_latency_override_value
+		: common_dimm->additive_latency;
+
+	sr_it = (popts->auto_self_refresh_en)
+		? popts->sr_it
+		: 0;
+	/* ZQ calibration */
+	zq_en = (popts->zq_en) ? 1 : 0;
+	/* write leveling */
+	wrlvl_en = (popts->wrlvl_en) ? 1 : 0;
+
+	/* Chip Select Memory Bounds (CSn_BNDS) */
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		unsigned long long ea, sa;
+		unsigned int cs_per_dimm
+			= CONFIG_CHIP_SELECTS_PER_CTRL / CONFIG_DIMM_SLOTS_PER_CTLR;
+		unsigned int dimm_number
+			= i / cs_per_dimm;
+		unsigned long long rank_density
+			= dimm_params[dimm_number].rank_density >> dbw_cap_adj;
+
+		if (dimm_params[dimm_number].n_ranks == 0) {
+			debug("Skipping setup of CS%u "
+				"because n_ranks on DIMM %u is 0\n", i, dimm_number);
+			continue;
+		}
+		if (popts->memctl_interleaving) {
+			switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
+			case FSL_DDR_CS0_CS1_CS2_CS3:
+				break;
+			case FSL_DDR_CS0_CS1:
+			case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+				if (i > 1)
+					cs_en = 0;
+				break;
+			case FSL_DDR_CS2_CS3:
+			default:
+				if (i > 0)
+					cs_en = 0;
+				break;
+			}
+			sa = common_dimm->base_address;
+			ea = sa + common_dimm->total_mem - 1;
+		} else if (!popts->memctl_interleaving) {
+			/*
+			 * If memory interleaving between controllers is NOT
+			 * enabled, the starting address for each memory
+			 * controller is distinct.  However, because rank
+			 * interleaving is enabled, the starting and ending
+			 * addresses of the total memory on that memory
+			 * controller needs to be programmed into its
+			 * respective CS0_BNDS.
+			 */
+			switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
+			case FSL_DDR_CS0_CS1_CS2_CS3:
+				sa = common_dimm->base_address;
+				ea = sa + common_dimm->total_mem - 1;
+				break;
+			case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+				if ((i >= 2) && (dimm_number == 0)) {
+					sa = dimm_params[dimm_number].base_address +
+					      2 * rank_density;
+					ea = sa + 2 * rank_density - 1;
+				} else {
+					sa = dimm_params[dimm_number].base_address;
+					ea = sa + 2 * rank_density - 1;
+				}
+				break;
+			case FSL_DDR_CS0_CS1:
+				if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) {
+					sa = dimm_params[dimm_number].base_address;
+					ea = sa + rank_density - 1;
+					if (i != 1)
+						sa += (i % cs_per_dimm) * rank_density;
+					ea += (i % cs_per_dimm) * rank_density;
+				} else {
+					sa = 0;
+					ea = 0;
+				}
+				if (i == 0)
+					ea += rank_density;
+				break;
+			case FSL_DDR_CS2_CS3:
+				if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) {
+					sa = dimm_params[dimm_number].base_address;
+					ea = sa + rank_density - 1;
+					if (i != 3)
+						sa += (i % cs_per_dimm) * rank_density;
+					ea += (i % cs_per_dimm) * rank_density;
+				} else {
+					sa = 0;
+					ea = 0;
+				}
+				if (i == 2)
+					ea += (rank_density >> dbw_cap_adj);
+				break;
+			default:  /* No bank(chip-select) interleaving */
+				sa = dimm_params[dimm_number].base_address;
+				ea = sa + rank_density - 1;
+				if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) {
+					sa += (i % cs_per_dimm) * rank_density;
+					ea += (i % cs_per_dimm) * rank_density;
+				} else {
+					sa = 0;
+					ea = 0;
+				}
+				break;
+			}
+		}
+
+		sa >>= 24;
+		ea >>= 24;
+
+		if (cs_en) {
+			ddr->cs[i].bnds = (0
+				| ((sa & 0xffff) << 16) /* starting address */
+				| ((ea & 0xffff) << 0)	/* ending address */
+				);
+		} else {
+			/* setting bnds to 0xffffffff for inactive CS */
+			ddr->cs[i].bnds = 0xffffffff;
+		}
+
+		debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
+		set_csn_config(dimm_number, i, ddr, popts, dimm_params);
+		set_csn_config_2(i, ddr);
+	}
+
+	/*
+	 * In the case we only need to compute the ddr sdram size, we only need
+	 * to set csn registers, so return from here.
+	 */
+	if (size_only)
+		return 0;
+
+	set_ddr_eor(ddr, popts);
+
+#if !defined(CONFIG_SYS_FSL_DDR1)
+	set_timing_cfg_0(ddr, popts, dimm_params);
+#endif
+
+	set_timing_cfg_3(ddr, popts, common_dimm, cas_latency,
+			 additive_latency);
+	set_timing_cfg_1(ddr, popts, common_dimm, cas_latency);
+	set_timing_cfg_2(ddr, popts, common_dimm,
+				cas_latency, additive_latency);
+
+	set_ddr_cdr1(ddr, popts);
+	set_ddr_cdr2(ddr, popts);
+	set_ddr_sdram_cfg(ddr, popts, common_dimm);
+	ip_rev = fsl_ddr_get_version();
+	if (ip_rev > 0x40400)
+		unq_mrs_en = 1;
+
+	set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en);
+	set_ddr_sdram_mode(ddr, popts, common_dimm,
+				cas_latency, additive_latency, unq_mrs_en);
+	set_ddr_sdram_mode_2(ddr, popts, common_dimm, unq_mrs_en);
+	set_ddr_sdram_interval(ddr, popts, common_dimm);
+	set_ddr_data_init(ddr);
+	set_ddr_sdram_clk_cntl(ddr, popts);
+	set_ddr_init_addr(ddr);
+	set_ddr_init_ext_addr(ddr);
+	set_timing_cfg_4(ddr, popts);
+	set_timing_cfg_5(ddr, cas_latency);
+
+	set_ddr_zq_cntl(ddr, zq_en);
+	set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts);
+
+	set_ddr_sr_cntr(ddr, sr_it);
+
+	set_ddr_sdram_rcw(ddr, popts, common_dimm);
+
+#ifdef CONFIG_SYS_FSL_DDR_EMU
+	/* disble DDR training for emulator */
+	ddr->debug[2] = 0x00000400;
+	ddr->debug[4] = 0xff800000;
+#endif
+	return check_fsl_memctl_config_regs(ddr);
+}
diff --git a/drivers/ddr/fsl/ddr1_dimm_params.c b/drivers/ddr/fsl/ddr1_dimm_params.c
new file mode 100644
index 0000000..7df27b9
--- /dev/null
+++ b/drivers/ddr/fsl/ddr1_dimm_params.c
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+
+#include <fsl_ddr.h>
+
+/*
+ * Calculate the Density of each Physical Rank.
+ * Returned size is in bytes.
+ *
+ * Study these table from Byte 31 of JEDEC SPD Spec.
+ *
+ *		DDR I	DDR II
+ *	Bit	Size	Size
+ *	---	-----	------
+ *	7 high	512MB	512MB
+ *	6	256MB	256MB
+ *	5	128MB	128MB
+ *	4	 64MB	 16GB
+ *	3	 32MB	  8GB
+ *	2	 16MB	  4GB
+ *	1	  2GB	  2GB
+ *	0 low	  1GB	  1GB
+ *
+ * Reorder Table to be linear by stripping the bottom
+ * 2 or 5 bits off and shifting them up to the top.
+ */
+
+static unsigned long long
+compute_ranksize(unsigned int mem_type, unsigned char row_dens)
+{
+	unsigned long long bsize;
+
+	/* Bottom 2 bits up to the top. */
+	bsize = ((row_dens >> 2) | ((row_dens & 3) << 6));
+	bsize <<= 24ULL;
+	debug("DDR: DDR I rank density = 0x%16llx\n", bsize);
+
+	return bsize;
+}
+
+/*
+ * Convert a two-nibble BCD value into a cycle time.
+ * While the spec calls for nano-seconds, picos are returned.
+ *
+ * This implements the tables for bytes 9, 23 and 25 for both
+ * DDR I and II.  No allowance for distinguishing the invalid
+ * fields absent for DDR I yet present in DDR II is made.
+ * (That is, cycle times of .25, .33, .66 and .75 ns are
+ * allowed for both DDR II and I.)
+ */
+static unsigned int
+convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
+{
+	/* Table look up the lower nibble, allow DDR I & II. */
+	unsigned int tenths_ps[16] = {
+		0,
+		100,
+		200,
+		300,
+		400,
+		500,
+		600,
+		700,
+		800,
+		900,
+		250,	/* This and the next 3 entries valid ... */
+		330,	/* ...  only for tCK calculations. */
+		660,
+		750,
+		0,	/* undefined */
+		0	/* undefined */
+	};
+
+	unsigned int whole_ns = (spd_val & 0xF0) >> 4;
+	unsigned int tenth_ns = spd_val & 0x0F;
+	unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
+
+	return ps;
+}
+
+static unsigned int
+convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val)
+{
+	unsigned int tenth_ns = (spd_val & 0xF0) >> 4;
+	unsigned int hundredth_ns = spd_val & 0x0F;
+	unsigned int ps = tenth_ns * 100 + hundredth_ns * 10;
+
+	return ps;
+}
+
+static unsigned int byte40_table_ps[8] = {
+	0,
+	250,
+	330,
+	500,
+	660,
+	750,
+	0,	/* supposed to be RFC, but not sure what that means */
+	0	/* Undefined */
+};
+
+static unsigned int
+compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc)
+{
+	unsigned int trfc_ps;
+
+	trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000
+		+ byte40_table_ps[(trctrfc_ext >> 1) & 0x7];
+
+	return trfc_ps;
+}
+
+static unsigned int
+compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc)
+{
+	unsigned int trc_ps;
+
+	trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7];
+
+	return trc_ps;
+}
+
+/*
+ * tCKmax from DDR I SPD Byte 43
+ *
+ * Bits 7:2 == whole ns
+ * Bits 1:0 == quarter ns
+ *    00    == 0.00 ns
+ *    01    == 0.25 ns
+ *    10    == 0.50 ns
+ *    11    == 0.75 ns
+ *
+ * Returns picoseconds.
+ */
+static unsigned int
+compute_tckmax_from_spd_ps(unsigned int byte43)
+{
+	return (byte43 >> 2) * 1000 + (byte43 & 0x3) * 250;
+}
+
+/*
+ * Determine Refresh Rate.  Ignore self refresh bit on DDR I.
+ * Table from SPD Spec, Byte 12, converted to picoseconds and
+ * filled in with "default" normal values.
+ */
+static unsigned int
+determine_refresh_rate_ps(const unsigned int spd_refresh)
+{
+	unsigned int refresh_time_ps[8] = {
+		15625000,	/* 0 Normal    1.00x */
+		3900000,	/* 1 Reduced    .25x */
+		7800000,	/* 2 Extended   .50x */
+		31300000,	/* 3 Extended  2.00x */
+		62500000,	/* 4 Extended  4.00x */
+		125000000,	/* 5 Extended  8.00x */
+		15625000,	/* 6 Normal    1.00x  filler */
+		15625000,	/* 7 Normal    1.00x  filler */
+	};
+
+	return refresh_time_ps[spd_refresh & 0x7];
+}
+
+/*
+ * The purpose of this function is to compute a suitable
+ * CAS latency given the DRAM clock period.  The SPD only
+ * defines at most 3 CAS latencies.  Typically the slower in
+ * frequency the DIMM runs at, the shorter its CAS latency can be.
+ * If the DIMM is operating at a sufficiently low frequency,
+ * it may be able to run at a CAS latency shorter than the
+ * shortest SPD-defined CAS latency.
+ *
+ * If a CAS latency is not found, 0 is returned.
+ *
+ * Do this by finding in the standard speed bin table the longest
+ * tCKmin that doesn't exceed the value of mclk_ps (tCK).
+ *
+ * An assumption made is that the SDRAM device allows the
+ * CL to be programmed for a value that is lower than those
+ * advertised by the SPD.  This is not always the case,
+ * as those modes not defined in the SPD are optional.
+ *
+ * CAS latency de-rating based upon values JEDEC Standard No. 79-E
+ * Table 11.
+ *
+ * ordinal 2, ddr1_speed_bins[1] contains tCK for CL=2
+ */
+				  /*   CL2.0 CL2.5 CL3.0  */
+unsigned short ddr1_speed_bins[] = {0, 7500, 6000, 5000 };
+
+unsigned int
+compute_derated_DDR1_CAS_latency(unsigned int mclk_ps)
+{
+	const unsigned int num_speed_bins = ARRAY_SIZE(ddr1_speed_bins);
+	unsigned int lowest_tCKmin_found = 0;
+	unsigned int lowest_tCKmin_CL = 0;
+	unsigned int i;
+
+	debug("mclk_ps = %u\n", mclk_ps);
+
+	for (i = 0; i < num_speed_bins; i++) {
+		unsigned int x = ddr1_speed_bins[i];
+		debug("i=%u, x = %u, lowest_tCKmin_found = %u\n",
+		      i, x, lowest_tCKmin_found);
+		if (x && lowest_tCKmin_found <= x && x <= mclk_ps) {
+			lowest_tCKmin_found = x;
+			lowest_tCKmin_CL = i + 1;
+		}
+	}
+
+	debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL);
+
+	return lowest_tCKmin_CL;
+}
+
+/*
+ * ddr_compute_dimm_parameters for DDR1 SPD
+ *
+ * Compute DIMM parameters based upon the SPD information in spd.
+ * Writes the results to the dimm_params_t structure pointed by pdimm.
+ *
+ * FIXME: use #define for the retvals
+ */
+unsigned int
+ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd,
+			     dimm_params_t *pdimm,
+			     unsigned int dimm_number)
+{
+	unsigned int retval;
+
+	if (spd->mem_type) {
+		if (spd->mem_type != SPD_MEMTYPE_DDR) {
+			printf("DIMM %u: is not a DDR1 SPD.\n", dimm_number);
+			return 1;
+		}
+	} else {
+		memset(pdimm, 0, sizeof(dimm_params_t));
+		return 1;
+	}
+
+	retval = ddr1_spd_check(spd);
+	if (retval) {
+		printf("DIMM %u: failed checksum\n", dimm_number);
+		return 2;
+	}
+
+	/*
+	 * The part name in ASCII in the SPD EEPROM is not null terminated.
+	 * Guarantee null termination here by presetting all bytes to 0
+	 * and copying the part name in ASCII from the SPD onto it
+	 */
+	memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+	memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
+
+	/* DIMM organization parameters */
+	pdimm->n_ranks = spd->nrows;
+	pdimm->rank_density = compute_ranksize(spd->mem_type, spd->bank_dens);
+	pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
+	pdimm->data_width = spd->dataw_lsb;
+	pdimm->primary_sdram_width = spd->primw;
+	pdimm->ec_sdram_width = spd->ecw;
+
+	/*
+	 * FIXME: Need to determine registered_dimm status.
+	 *     1 == register buffered
+	 *     0 == unbuffered
+	 */
+	pdimm->registered_dimm = 0;	/* unbuffered */
+
+	/* SDRAM device parameters */
+	pdimm->n_row_addr = spd->nrow_addr;
+	pdimm->n_col_addr = spd->ncol_addr;
+	pdimm->n_banks_per_sdram_device = spd->nbanks;
+	pdimm->edc_config = spd->config;
+	pdimm->burst_lengths_bitmask = spd->burstl;
+	pdimm->row_density = spd->bank_dens;
+
+	/*
+	 * Calculate the Maximum Data Rate based on the Minimum Cycle time.
+	 * The SPD clk_cycle field (tCKmin) is measured in tenths of
+	 * nanoseconds and represented as BCD.
+	 */
+	pdimm->tckmin_x_ps
+		= convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle);
+	pdimm->tckmin_x_minus_1_ps
+		= convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2);
+	pdimm->tckmin_x_minus_2_ps
+		= convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3);
+
+	pdimm->tckmax_ps = compute_tckmax_from_spd_ps(spd->tckmax);
+
+	/*
+	 * Compute CAS latencies defined by SPD
+	 * The SPD caslat_x should have at least 1 and at most 3 bits set.
+	 *
+	 * If cas_lat after masking is 0, the __ilog2 function returns
+	 * 255 into the variable.   This behavior is abused once.
+	 */
+	pdimm->caslat_x  = __ilog2(spd->cas_lat);
+	pdimm->caslat_x_minus_1 = __ilog2(spd->cas_lat
+					  & ~(1 << pdimm->caslat_x));
+	pdimm->caslat_x_minus_2 = __ilog2(spd->cas_lat
+					  & ~(1 << pdimm->caslat_x)
+					  & ~(1 << pdimm->caslat_x_minus_1));
+
+	/* Compute CAS latencies below that defined by SPD */
+	pdimm->caslat_lowest_derated
+		= compute_derated_DDR1_CAS_latency(get_memory_clk_period_ps());
+
+	/* Compute timing parameters */
+	pdimm->trcd_ps = spd->trcd * 250;
+	pdimm->trp_ps = spd->trp * 250;
+	pdimm->tras_ps = spd->tras * 1000;
+
+	pdimm->twr_ps = mclk_to_picos(3);
+	pdimm->twtr_ps = mclk_to_picos(1);
+	pdimm->trfc_ps = compute_trfc_ps_from_spd(0, spd->trfc);
+
+	pdimm->trrd_ps = spd->trrd * 250;
+	pdimm->trc_ps = compute_trc_ps_from_spd(0, spd->trc);
+
+	pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh);
+
+	pdimm->tis_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup);
+	pdimm->tih_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold);
+	pdimm->tds_ps
+		= convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup);
+	pdimm->tdh_ps
+		= convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
+
+	pdimm->trtp_ps = mclk_to_picos(2);	/* By the book. */
+	pdimm->tdqsq_max_ps = spd->tdqsq * 10;
+	pdimm->tqhs_ps = spd->tqhs * 10;
+
+	return 0;
+}
diff --git a/drivers/ddr/fsl/ddr2_dimm_params.c b/drivers/ddr/fsl/ddr2_dimm_params.c
new file mode 100644
index 0000000..d865df7
--- /dev/null
+++ b/drivers/ddr/fsl/ddr2_dimm_params.c
@@ -0,0 +1,342 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+
+#include <fsl_ddr.h>
+/*
+ * Calculate the Density of each Physical Rank.
+ * Returned size is in bytes.
+ *
+ * Study these table from Byte 31 of JEDEC SPD Spec.
+ *
+ *		DDR I	DDR II
+ *	Bit	Size	Size
+ *	---	-----	------
+ *	7 high	512MB	512MB
+ *	6	256MB	256MB
+ *	5	128MB	128MB
+ *	4	 64MB	 16GB
+ *	3	 32MB	  8GB
+ *	2	 16MB	  4GB
+ *	1	  2GB	  2GB
+ *	0 low	  1GB	  1GB
+ *
+ * Reorder Table to be linear by stripping the bottom
+ * 2 or 5 bits off and shifting them up to the top.
+ *
+ */
+static unsigned long long
+compute_ranksize(unsigned int mem_type, unsigned char row_dens)
+{
+	unsigned long long bsize;
+
+	/* Bottom 5 bits up to the top. */
+	bsize = ((row_dens >> 5) | ((row_dens & 31) << 3));
+	bsize <<= 27ULL;
+	debug("DDR: DDR II rank density = 0x%16llx\n", bsize);
+
+	return bsize;
+}
+
+/*
+ * Convert a two-nibble BCD value into a cycle time.
+ * While the spec calls for nano-seconds, picos are returned.
+ *
+ * This implements the tables for bytes 9, 23 and 25 for both
+ * DDR I and II.  No allowance for distinguishing the invalid
+ * fields absent for DDR I yet present in DDR II is made.
+ * (That is, cycle times of .25, .33, .66 and .75 ns are
+ * allowed for both DDR II and I.)
+ */
+static unsigned int
+convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
+{
+	/* Table look up the lower nibble, allow DDR I & II. */
+	unsigned int tenths_ps[16] = {
+		0,
+		100,
+		200,
+		300,
+		400,
+		500,
+		600,
+		700,
+		800,
+		900,
+		250,	/* This and the next 3 entries valid ... */
+		330,	/* ...  only for tCK calculations. */
+		660,
+		750,
+		0,	/* undefined */
+		0	/* undefined */
+	};
+
+	unsigned int whole_ns = (spd_val & 0xF0) >> 4;
+	unsigned int tenth_ns = spd_val & 0x0F;
+	unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
+
+	return ps;
+}
+
+static unsigned int
+convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val)
+{
+	unsigned int tenth_ns = (spd_val & 0xF0) >> 4;
+	unsigned int hundredth_ns = spd_val & 0x0F;
+	unsigned int ps = tenth_ns * 100 + hundredth_ns * 10;
+
+	return ps;
+}
+
+static unsigned int byte40_table_ps[8] = {
+	0,
+	250,
+	330,
+	500,
+	660,
+	750,
+	0,	/* supposed to be RFC, but not sure what that means */
+	0	/* Undefined */
+};
+
+static unsigned int
+compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc)
+{
+	unsigned int trfc_ps;
+
+	trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000
+		+ byte40_table_ps[(trctrfc_ext >> 1) & 0x7];
+
+	return trfc_ps;
+}
+
+static unsigned int
+compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc)
+{
+	unsigned int trc_ps;
+
+	trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7];
+
+	return trc_ps;
+}
+
+/*
+ * Determine Refresh Rate.  Ignore self refresh bit on DDR I.
+ * Table from SPD Spec, Byte 12, converted to picoseconds and
+ * filled in with "default" normal values.
+ */
+static unsigned int
+determine_refresh_rate_ps(const unsigned int spd_refresh)
+{
+	unsigned int refresh_time_ps[8] = {
+		15625000,	/* 0 Normal    1.00x */
+		3900000,	/* 1 Reduced    .25x */
+		7800000,	/* 2 Extended   .50x */
+		31300000,	/* 3 Extended  2.00x */
+		62500000,	/* 4 Extended  4.00x */
+		125000000,	/* 5 Extended  8.00x */
+		15625000,	/* 6 Normal    1.00x  filler */
+		15625000,	/* 7 Normal    1.00x  filler */
+	};
+
+	return refresh_time_ps[spd_refresh & 0x7];
+}
+
+/*
+ * The purpose of this function is to compute a suitable
+ * CAS latency given the DRAM clock period.  The SPD only
+ * defines at most 3 CAS latencies.  Typically the slower in
+ * frequency the DIMM runs at, the shorter its CAS latency can.
+ * be.  If the DIMM is operating at a sufficiently low frequency,
+ * it may be able to run at a CAS latency shorter than the
+ * shortest SPD-defined CAS latency.
+ *
+ * If a CAS latency is not found, 0 is returned.
+ *
+ * Do this by finding in the standard speed bin table the longest
+ * tCKmin that doesn't exceed the value of mclk_ps (tCK).
+ *
+ * An assumption made is that the SDRAM device allows the
+ * CL to be programmed for a value that is lower than those
+ * advertised by the SPD.  This is not always the case,
+ * as those modes not defined in the SPD are optional.
+ *
+ * CAS latency de-rating based upon values JEDEC Standard No. 79-2C
+ * Table 40, "DDR2 SDRAM stanadard speed bins and tCK, tRCD, tRP, tRAS,
+ * and tRC for corresponding bin"
+ *
+ * ordinal 2, ddr2_speed_bins[1] contains tCK for CL=3
+ * Not certain if any good value exists for CL=2
+ */
+				 /* CL2   CL3   CL4   CL5   CL6  CL7*/
+unsigned short ddr2_speed_bins[] = {   0, 5000, 3750, 3000, 2500, 1875 };
+
+unsigned int
+compute_derated_DDR2_CAS_latency(unsigned int mclk_ps)
+{
+	const unsigned int num_speed_bins = ARRAY_SIZE(ddr2_speed_bins);
+	unsigned int lowest_tCKmin_found = 0;
+	unsigned int lowest_tCKmin_CL = 0;
+	unsigned int i;
+
+	debug("mclk_ps = %u\n", mclk_ps);
+
+	for (i = 0; i < num_speed_bins; i++) {
+		unsigned int x = ddr2_speed_bins[i];
+		debug("i=%u, x = %u, lowest_tCKmin_found = %u\n",
+		      i, x, lowest_tCKmin_found);
+		if (x && x <= mclk_ps && x >= lowest_tCKmin_found ) {
+			lowest_tCKmin_found = x;
+			lowest_tCKmin_CL = i + 2;
+		}
+	}
+
+	debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL);
+
+	return lowest_tCKmin_CL;
+}
+
+/*
+ * ddr_compute_dimm_parameters for DDR2 SPD
+ *
+ * Compute DIMM parameters based upon the SPD information in spd.
+ * Writes the results to the dimm_params_t structure pointed by pdimm.
+ *
+ * FIXME: use #define for the retvals
+ */
+unsigned int
+ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd,
+			     dimm_params_t *pdimm,
+			     unsigned int dimm_number)
+{
+	unsigned int retval;
+
+	if (spd->mem_type) {
+		if (spd->mem_type != SPD_MEMTYPE_DDR2) {
+			printf("DIMM %u: is not a DDR2 SPD.\n", dimm_number);
+			return 1;
+		}
+	} else {
+		memset(pdimm, 0, sizeof(dimm_params_t));
+		return 1;
+	}
+
+	retval = ddr2_spd_check(spd);
+	if (retval) {
+		printf("DIMM %u: failed checksum\n", dimm_number);
+		return 2;
+	}
+
+	/*
+	 * The part name in ASCII in the SPD EEPROM is not null terminated.
+	 * Guarantee null termination here by presetting all bytes to 0
+	 * and copying the part name in ASCII from the SPD onto it
+	 */
+	memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+	memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
+
+	/* DIMM organization parameters */
+	pdimm->n_ranks = (spd->mod_ranks & 0x7) + 1;
+	pdimm->rank_density = compute_ranksize(spd->mem_type, spd->rank_dens);
+	pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
+	pdimm->data_width = spd->dataw;
+	pdimm->primary_sdram_width = spd->primw;
+	pdimm->ec_sdram_width = spd->ecw;
+
+	/* These are all the types defined by the JEDEC DDR2 SPD 1.3 spec */
+	switch (spd->dimm_type) {
+	case DDR2_SPD_DIMMTYPE_RDIMM:
+	case DDR2_SPD_DIMMTYPE_72B_SO_RDIMM:
+	case DDR2_SPD_DIMMTYPE_MINI_RDIMM:
+		/* Registered/buffered DIMMs */
+		pdimm->registered_dimm = 1;
+		break;
+
+	case DDR2_SPD_DIMMTYPE_UDIMM:
+	case DDR2_SPD_DIMMTYPE_SO_DIMM:
+	case DDR2_SPD_DIMMTYPE_MICRO_DIMM:
+	case DDR2_SPD_DIMMTYPE_MINI_UDIMM:
+		/* Unbuffered DIMMs */
+		pdimm->registered_dimm = 0;
+		break;
+
+	case DDR2_SPD_DIMMTYPE_72B_SO_CDIMM:
+	default:
+		printf("unknown dimm_type 0x%02X\n", spd->dimm_type);
+		return 1;
+	}
+
+	/* SDRAM device parameters */
+	pdimm->n_row_addr = spd->nrow_addr;
+	pdimm->n_col_addr = spd->ncol_addr;
+	pdimm->n_banks_per_sdram_device = spd->nbanks;
+	pdimm->edc_config = spd->config;
+	pdimm->burst_lengths_bitmask = spd->burstl;
+	pdimm->row_density = spd->rank_dens;
+
+	/*
+	 * Calculate the Maximum Data Rate based on the Minimum Cycle time.
+	 * The SPD clk_cycle field (tCKmin) is measured in tenths of
+	 * nanoseconds and represented as BCD.
+	 */
+	pdimm->tckmin_x_ps
+		= convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle);
+	pdimm->tckmin_x_minus_1_ps
+		= convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2);
+	pdimm->tckmin_x_minus_2_ps
+		= convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3);
+
+	pdimm->tckmax_ps = convert_bcd_tenths_to_cycle_time_ps(spd->tckmax);
+
+	/*
+	 * Compute CAS latencies defined by SPD
+	 * The SPD caslat_x should have at least 1 and at most 3 bits set.
+	 *
+	 * If cas_lat after masking is 0, the __ilog2 function returns
+	 * 255 into the variable.   This behavior is abused once.
+	 */
+	pdimm->caslat_x  = __ilog2(spd->cas_lat);
+	pdimm->caslat_x_minus_1 = __ilog2(spd->cas_lat
+					  & ~(1 << pdimm->caslat_x));
+	pdimm->caslat_x_minus_2 = __ilog2(spd->cas_lat
+					  & ~(1 << pdimm->caslat_x)
+					  & ~(1 << pdimm->caslat_x_minus_1));
+
+	/* Compute CAS latencies below that defined by SPD */
+	pdimm->caslat_lowest_derated
+		= compute_derated_DDR2_CAS_latency(get_memory_clk_period_ps());
+
+	/* Compute timing parameters */
+	pdimm->trcd_ps = spd->trcd * 250;
+	pdimm->trp_ps = spd->trp * 250;
+	pdimm->tras_ps = spd->tras * 1000;
+
+	pdimm->twr_ps = spd->twr * 250;
+	pdimm->twtr_ps = spd->twtr * 250;
+	pdimm->trfc_ps = compute_trfc_ps_from_spd(spd->trctrfc_ext, spd->trfc);
+
+	pdimm->trrd_ps = spd->trrd * 250;
+	pdimm->trc_ps = compute_trc_ps_from_spd(spd->trctrfc_ext, spd->trc);
+
+	pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh);
+
+	pdimm->tis_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup);
+	pdimm->tih_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold);
+	pdimm->tds_ps
+		= convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup);
+	pdimm->tdh_ps
+		= convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
+
+	pdimm->trtp_ps = spd->trtp * 250;
+	pdimm->tdqsq_max_ps = spd->tdqsq * 10;
+	pdimm->tqhs_ps = spd->tqhs * 10;
+
+	return 0;
+}
diff --git a/drivers/ddr/fsl/ddr3_dimm_params.c b/drivers/ddr/fsl/ddr3_dimm_params.c
new file mode 100644
index 0000000..a4b8c10
--- /dev/null
+++ b/drivers/ddr/fsl/ddr3_dimm_params.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *	Dave Liu <daveliu@freescale.com>
+ *
+ * calculate the organization and timing parameter
+ * from ddr3 spd, please refer to the spec
+ * JEDEC standard No.21-C 4_01_02_11R18.pdf
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+
+#include <fsl_ddr.h>
+
+/*
+ * Calculate the Density of each Physical Rank.
+ * Returned size is in bytes.
+ *
+ * each rank size =
+ * sdram capacity(bit) / 8 * primary bus width / sdram width
+ *
+ * where: sdram capacity  = spd byte4[3:0]
+ *        primary bus width = spd byte8[2:0]
+ *        sdram width = spd byte7[2:0]
+ *
+ * SPD byte4 - sdram density and banks
+ *	bit[3:0]	size(bit)	size(byte)
+ *	0000		256Mb		32MB
+ *	0001		512Mb		64MB
+ *	0010		1Gb		128MB
+ *	0011		2Gb		256MB
+ *	0100		4Gb		512MB
+ *	0101		8Gb		1GB
+ *	0110		16Gb		2GB
+ *
+ * SPD byte8 - module memory bus width
+ * 	bit[2:0]	primary bus width
+ *	000		8bits
+ * 	001		16bits
+ * 	010		32bits
+ * 	011		64bits
+ *
+ * SPD byte7 - module organiztion
+ * 	bit[2:0]	sdram device width
+ * 	000		4bits
+ * 	001		8bits
+ * 	010		16bits
+ * 	011		32bits
+ *
+ */
+static unsigned long long
+compute_ranksize(const ddr3_spd_eeprom_t *spd)
+{
+	unsigned long long bsize;
+
+	int nbit_sdram_cap_bsize = 0;
+	int nbit_primary_bus_width = 0;
+	int nbit_sdram_width = 0;
+
+	if ((spd->density_banks & 0xf) < 7)
+		nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28;
+	if ((spd->bus_width & 0x7) < 4)
+		nbit_primary_bus_width = (spd->bus_width & 0x7) + 3;
+	if ((spd->organization & 0x7) < 4)
+		nbit_sdram_width = (spd->organization & 0x7) + 2;
+
+	bsize = 1ULL << (nbit_sdram_cap_bsize - 3
+		    + nbit_primary_bus_width - nbit_sdram_width);
+
+	debug("DDR: DDR III rank density = 0x%16llx\n", bsize);
+
+	return bsize;
+}
+
+/*
+ * ddr_compute_dimm_parameters for DDR3 SPD
+ *
+ * Compute DIMM parameters based upon the SPD information in spd.
+ * Writes the results to the dimm_params_t structure pointed by pdimm.
+ *
+ */
+unsigned int
+ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
+			     dimm_params_t *pdimm,
+			     unsigned int dimm_number)
+{
+	unsigned int retval;
+	unsigned int mtb_ps;
+	int ftb_10th_ps;
+	int i;
+
+	if (spd->mem_type) {
+		if (spd->mem_type != SPD_MEMTYPE_DDR3) {
+			printf("DIMM %u: is not a DDR3 SPD.\n", dimm_number);
+			return 1;
+		}
+	} else {
+		memset(pdimm, 0, sizeof(dimm_params_t));
+		return 1;
+	}
+
+	retval = ddr3_spd_check(spd);
+	if (retval) {
+		printf("DIMM %u: failed checksum\n", dimm_number);
+		return 2;
+	}
+
+	/*
+	 * The part name in ASCII in the SPD EEPROM is not null terminated.
+	 * Guarantee null termination here by presetting all bytes to 0
+	 * and copying the part name in ASCII from the SPD onto it
+	 */
+	memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+	if ((spd->info_size_crc & 0xF) > 1)
+		memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
+
+	/* DIMM organization parameters */
+	pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1;
+	pdimm->rank_density = compute_ranksize(spd);
+	pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
+	pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7));
+	if ((spd->bus_width >> 3) & 0x3)
+		pdimm->ec_sdram_width = 8;
+	else
+		pdimm->ec_sdram_width = 0;
+	pdimm->data_width = pdimm->primary_sdram_width
+			  + pdimm->ec_sdram_width;
+	pdimm->device_width = 1 << ((spd->organization & 0x7) + 2);
+
+	/* These are the types defined by the JEDEC DDR3 SPD spec */
+	pdimm->mirrored_dimm = 0;
+	pdimm->registered_dimm = 0;
+	switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) {
+	case DDR3_SPD_MODULETYPE_RDIMM:
+	case DDR3_SPD_MODULETYPE_MINI_RDIMM:
+	case DDR3_SPD_MODULETYPE_72B_SO_RDIMM:
+		/* Registered/buffered DIMMs */
+		pdimm->registered_dimm = 1;
+		for (i = 0; i < 16; i += 2) {
+			u8 rcw = spd->mod_section.registered.rcw[i/2];
+			pdimm->rcw[i]   = (rcw >> 0) & 0x0F;
+			pdimm->rcw[i+1] = (rcw >> 4) & 0x0F;
+		}
+		break;
+
+	case DDR3_SPD_MODULETYPE_UDIMM:
+	case DDR3_SPD_MODULETYPE_SO_DIMM:
+	case DDR3_SPD_MODULETYPE_MICRO_DIMM:
+	case DDR3_SPD_MODULETYPE_MINI_UDIMM:
+	case DDR3_SPD_MODULETYPE_MINI_CDIMM:
+	case DDR3_SPD_MODULETYPE_72B_SO_UDIMM:
+	case DDR3_SPD_MODULETYPE_72B_SO_CDIMM:
+	case DDR3_SPD_MODULETYPE_LRDIMM:
+	case DDR3_SPD_MODULETYPE_16B_SO_DIMM:
+	case DDR3_SPD_MODULETYPE_32B_SO_DIMM:
+		/* Unbuffered DIMMs */
+		if (spd->mod_section.unbuffered.addr_mapping & 0x1)
+			pdimm->mirrored_dimm = 1;
+		break;
+
+	default:
+		printf("unknown module_type 0x%02X\n", spd->module_type);
+		return 1;
+	}
+
+	/* SDRAM device parameters */
+	pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12;
+	pdimm->n_col_addr = (spd->addressing & 0x7) + 9;
+	pdimm->n_banks_per_sdram_device = 8 << ((spd->density_banks >> 4) & 0x7);
+
+	/*
+	 * The SPD spec has not the ECC bit,
+	 * We consider the DIMM as ECC capability
+	 * when the extension bus exist
+	 */
+	if (pdimm->ec_sdram_width)
+		pdimm->edc_config = 0x02;
+	else
+		pdimm->edc_config = 0x00;
+
+	/*
+	 * The SPD spec has not the burst length byte
+	 * but DDR3 spec has nature BL8 and BC4,
+	 * BL8 -bit3, BC4 -bit2
+	 */
+	pdimm->burst_lengths_bitmask = 0x0c;
+	pdimm->row_density = __ilog2(pdimm->rank_density);
+
+	/* MTB - medium timebase
+	 * The unit in the SPD spec is ns,
+	 * We convert it to ps.
+	 * eg: MTB = 0.125ns (125ps)
+	 */
+	mtb_ps = (spd->mtb_dividend * 1000) /spd->mtb_divisor;
+	pdimm->mtb_ps = mtb_ps;
+
+	/*
+	 * FTB - fine timebase
+	 * use 1/10th of ps as our unit to avoid floating point
+	 * eg, 10 for 1ps, 25 for 2.5ps, 50 for 5ps
+	 */
+	ftb_10th_ps =
+		((spd->ftb_div & 0xf0) >> 4) * 10 / (spd->ftb_div & 0x0f);
+	pdimm->ftb_10th_ps = ftb_10th_ps;
+	/*
+	 * sdram minimum cycle time
+	 * we assume the MTB is 0.125ns
+	 * eg:
+	 * tck_min=15 MTB (1.875ns) ->DDR3-1066
+	 *        =12 MTB (1.5ns) ->DDR3-1333
+	 *        =10 MTB (1.25ns) ->DDR3-1600
+	 */
+	pdimm->tckmin_x_ps = spd->tck_min * mtb_ps +
+		(spd->fine_tck_min * ftb_10th_ps) / 10;
+
+	/*
+	 * CAS latency supported
+	 * bit4 - CL4
+	 * bit5 - CL5
+	 * bit18 - CL18
+	 */
+	pdimm->caslat_x  = ((spd->caslat_msb << 8) | spd->caslat_lsb) << 4;
+
+	/*
+	 * min CAS latency time
+	 * eg: taa_min =
+	 * DDR3-800D	100 MTB (12.5ns)
+	 * DDR3-1066F	105 MTB (13.125ns)
+	 * DDR3-1333H	108 MTB (13.5ns)
+	 * DDR3-1600H	90 MTB (11.25ns)
+	 */
+	pdimm->taa_ps = spd->taa_min * mtb_ps +
+		(spd->fine_taa_min * ftb_10th_ps) / 10;
+
+	/*
+	 * min write recovery time
+	 * eg:
+	 * twr_min = 120 MTB (15ns) -> all speed grades.
+	 */
+	pdimm->twr_ps = spd->twr_min * mtb_ps;
+
+	/*
+	 * min RAS to CAS delay time
+	 * eg: trcd_min =
+	 * DDR3-800	100 MTB (12.5ns)
+	 * DDR3-1066F	105 MTB (13.125ns)
+	 * DDR3-1333H	108 MTB (13.5ns)
+	 * DDR3-1600H	90 MTB (11.25)
+	 */
+	pdimm->trcd_ps = spd->trcd_min * mtb_ps +
+		(spd->fine_trcd_min * ftb_10th_ps) / 10;
+
+	/*
+	 * min row active to row active delay time
+	 * eg: trrd_min =
+	 * DDR3-800(1KB page)	80 MTB (10ns)
+	 * DDR3-1333(1KB page)	48 MTB (6ns)
+	 */
+	pdimm->trrd_ps = spd->trrd_min * mtb_ps;
+
+	/*
+	 * min row precharge delay time
+	 * eg: trp_min =
+	 * DDR3-800D	100 MTB (12.5ns)
+	 * DDR3-1066F	105 MTB (13.125ns)
+	 * DDR3-1333H	108 MTB (13.5ns)
+	 * DDR3-1600H	90 MTB (11.25ns)
+	 */
+	pdimm->trp_ps = spd->trp_min * mtb_ps +
+		(spd->fine_trp_min * ftb_10th_ps) / 10;
+
+	/* min active to precharge delay time
+	 * eg: tRAS_min =
+	 * DDR3-800D	300 MTB (37.5ns)
+	 * DDR3-1066F	300 MTB (37.5ns)
+	 * DDR3-1333H	288 MTB (36ns)
+	 * DDR3-1600H	280 MTB (35ns)
+	 */
+	pdimm->tras_ps = (((spd->tras_trc_ext & 0xf) << 8) | spd->tras_min_lsb)
+			* mtb_ps;
+	/*
+	 * min active to actice/refresh delay time
+	 * eg: tRC_min =
+	 * DDR3-800D	400 MTB (50ns)
+	 * DDR3-1066F	405 MTB (50.625ns)
+	 * DDR3-1333H	396 MTB (49.5ns)
+	 * DDR3-1600H	370 MTB (46.25ns)
+	 */
+	pdimm->trc_ps = (((spd->tras_trc_ext & 0xf0) << 4) | spd->trc_min_lsb)
+			* mtb_ps + (spd->fine_trc_min * ftb_10th_ps) / 10;
+	/*
+	 * min refresh recovery delay time
+	 * eg: tRFC_min =
+	 * 512Mb	720 MTB (90ns)
+	 * 1Gb		880 MTB (110ns)
+	 * 2Gb		1280 MTB (160ns)
+	 */
+	pdimm->trfc_ps = ((spd->trfc_min_msb << 8) | spd->trfc_min_lsb)
+			* mtb_ps;
+	/*
+	 * min internal write to read command delay time
+	 * eg: twtr_min = 40 MTB (7.5ns) - all speed bins.
+	 * tWRT is at least 4 mclk independent of operating freq.
+	 */
+	pdimm->twtr_ps = spd->twtr_min * mtb_ps;
+
+	/*
+	 * min internal read to precharge command delay time
+	 * eg: trtp_min = 40 MTB (7.5ns) - all speed bins.
+	 * tRTP is at least 4 mclk independent of operating freq.
+	 */
+	pdimm->trtp_ps = spd->trtp_min * mtb_ps;
+
+	/*
+	 * Average periodic refresh interval
+	 * tREFI = 7.8 us at normal temperature range
+	 *       = 3.9 us at ext temperature range
+	 */
+	pdimm->refresh_rate_ps = 7800000;
+	if ((spd->therm_ref_opt & 0x1) && !(spd->therm_ref_opt & 0x2)) {
+		pdimm->refresh_rate_ps = 3900000;
+		pdimm->extended_op_srt = 1;
+	}
+
+	/*
+	 * min four active window delay time
+	 * eg: tfaw_min =
+	 * DDR3-800(1KB page)	320 MTB (40ns)
+	 * DDR3-1066(1KB page)	300 MTB (37.5ns)
+	 * DDR3-1333(1KB page)	240 MTB (30ns)
+	 * DDR3-1600(1KB page)	240 MTB (30ns)
+	 */
+	pdimm->tfaw_ps = (((spd->tfaw_msb & 0xf) << 8) | spd->tfaw_min)
+			* mtb_ps;
+
+	return 0;
+}
diff --git a/drivers/ddr/fsl/interactive.c b/drivers/ddr/fsl/interactive.c
new file mode 100644
index 0000000..ebf3ed6
--- /dev/null
+++ b/drivers/ddr/fsl/interactive.c
@@ -0,0 +1,1871 @@
+/*
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
+ * Based on code from spd_sdram.c
+ * Author: James Yang [at freescale.com]
+ *         York Sun [at freescale.com]
+ */
+
+#include <common.h>
+#include <linux/ctype.h>
+#include <asm/types.h>
+#include <asm/io.h>
+
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr.h>
+
+/* Option parameter Structures */
+struct options_string {
+	const char *option_name;
+	size_t offset;
+	unsigned int size;
+	const char printhex;
+};
+
+static unsigned int picos_to_mhz(unsigned int picos)
+{
+	return 1000000 / picos;
+}
+
+static void print_option_table(const struct options_string *table,
+			 int table_size,
+			 const void *base)
+{
+	unsigned int i;
+	unsigned int *ptr;
+	unsigned long long *ptr_l;
+
+	for (i = 0; i < table_size; i++) {
+		switch (table[i].size) {
+		case 4:
+			ptr = (unsigned int *) (base + table[i].offset);
+			if (table[i].printhex) {
+				printf("%s = 0x%08X\n",
+					table[i].option_name, *ptr);
+			} else {
+				printf("%s = %u\n",
+					table[i].option_name, *ptr);
+			}
+			break;
+		case 8:
+			ptr_l = (unsigned long long *) (base + table[i].offset);
+			printf("%s = %llu\n",
+				table[i].option_name, *ptr_l);
+			break;
+		default:
+			printf("Unrecognized size!\n");
+			break;
+		}
+	}
+}
+
+static int handle_option_table(const struct options_string *table,
+			 int table_size,
+			 void *base,
+			 const char *opt,
+			 const char *val)
+{
+	unsigned int i;
+	unsigned int value, *ptr;
+	unsigned long long value_l, *ptr_l;
+
+	for (i = 0; i < table_size; i++) {
+		if (strcmp(table[i].option_name, opt) != 0)
+			continue;
+		switch (table[i].size) {
+		case 4:
+			value = simple_strtoul(val, NULL, 0);
+			ptr = base + table[i].offset;
+			*ptr = value;
+			break;
+		case 8:
+			value_l = simple_strtoull(val, NULL, 0);
+			ptr_l = base + table[i].offset;
+			*ptr_l = value_l;
+			break;
+		default:
+			printf("Unrecognized size!\n");
+			break;
+		}
+		return 1;
+	}
+
+	return 0;
+}
+
+static void fsl_ddr_generic_edit(void *pdata,
+			   void *pend,
+			   unsigned int element_size,
+			   unsigned int element_num,
+			   unsigned int value)
+{
+	char *pcdata = (char *)pdata;		/* BIG ENDIAN ONLY */
+
+	pcdata += element_num * element_size;
+	if ((pcdata + element_size) > (char *) pend) {
+		printf("trying to write past end of data\n");
+		return;
+	}
+
+	switch (element_size) {
+	case 1:
+		__raw_writeb(value, pcdata);
+		break;
+	case 2:
+		__raw_writew(value, pcdata);
+		break;
+	case 4:
+		__raw_writel(value, pcdata);
+		break;
+	default:
+		printf("unexpected element size %u\n", element_size);
+		break;
+	}
+}
+
+static void fsl_ddr_spd_edit(fsl_ddr_info_t *pinfo,
+		       unsigned int ctrl_num,
+		       unsigned int dimm_num,
+		       unsigned int element_num,
+		       unsigned int value)
+{
+	generic_spd_eeprom_t *pspd;
+
+	pspd = &(pinfo->spd_installed_dimms[ctrl_num][dimm_num]);
+	fsl_ddr_generic_edit(pspd, pspd + 1, 1, element_num, value);
+}
+
+#define COMMON_TIMING(x) {#x, offsetof(common_timing_params_t, x), \
+	sizeof((common_timing_params_t *)0)->x, 0}
+
+static void lowest_common_dimm_parameters_edit(fsl_ddr_info_t *pinfo,
+					unsigned int ctrl_num,
+					const char *optname_str,
+					const char *value_str)
+{
+	common_timing_params_t *p = &pinfo->common_timing_params[ctrl_num];
+
+	static const struct options_string options[] = {
+		COMMON_TIMING(tckmin_x_ps),
+		COMMON_TIMING(tckmax_ps),
+		COMMON_TIMING(tckmax_max_ps),
+		COMMON_TIMING(trcd_ps),
+		COMMON_TIMING(trp_ps),
+		COMMON_TIMING(tras_ps),
+		COMMON_TIMING(twr_ps),
+		COMMON_TIMING(twtr_ps),
+		COMMON_TIMING(trfc_ps),
+		COMMON_TIMING(trrd_ps),
+		COMMON_TIMING(trc_ps),
+		COMMON_TIMING(refresh_rate_ps),
+		COMMON_TIMING(tis_ps),
+		COMMON_TIMING(tih_ps),
+		COMMON_TIMING(tds_ps),
+		COMMON_TIMING(tdh_ps),
+		COMMON_TIMING(trtp_ps),
+		COMMON_TIMING(tdqsq_max_ps),
+		COMMON_TIMING(tqhs_ps),
+		COMMON_TIMING(ndimms_present),
+		COMMON_TIMING(lowest_common_SPD_caslat),
+		COMMON_TIMING(highest_common_derated_caslat),
+		COMMON_TIMING(additive_latency),
+		COMMON_TIMING(all_dimms_burst_lengths_bitmask),
+		COMMON_TIMING(all_dimms_registered),
+		COMMON_TIMING(all_dimms_unbuffered),
+		COMMON_TIMING(all_dimms_ecc_capable),
+		COMMON_TIMING(total_mem),
+		COMMON_TIMING(base_address),
+	};
+	static const unsigned int n_opts = ARRAY_SIZE(options);
+
+	if (handle_option_table(options, n_opts, p, optname_str, value_str))
+		return;
+
+	printf("Error: couldn't find option string %s\n", optname_str);
+}
+
+#define DIMM_PARM(x) {#x, offsetof(dimm_params_t, x), \
+	sizeof((dimm_params_t *)0)->x, 0}
+
+static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo,
+				   unsigned int ctrl_num,
+				   unsigned int dimm_num,
+				   const char *optname_str,
+				   const char *value_str)
+{
+	dimm_params_t *p = &(pinfo->dimm_params[ctrl_num][dimm_num]);
+
+	static const struct options_string options[] = {
+		DIMM_PARM(n_ranks),
+		DIMM_PARM(data_width),
+		DIMM_PARM(primary_sdram_width),
+		DIMM_PARM(ec_sdram_width),
+		DIMM_PARM(registered_dimm),
+		DIMM_PARM(device_width),
+
+		DIMM_PARM(n_row_addr),
+		DIMM_PARM(n_col_addr),
+		DIMM_PARM(edc_config),
+		DIMM_PARM(n_banks_per_sdram_device),
+		DIMM_PARM(burst_lengths_bitmask),
+		DIMM_PARM(row_density),
+
+		DIMM_PARM(tckmin_x_ps),
+		DIMM_PARM(tckmin_x_minus_1_ps),
+		DIMM_PARM(tckmin_x_minus_2_ps),
+		DIMM_PARM(tckmax_ps),
+
+		DIMM_PARM(caslat_x),
+		DIMM_PARM(caslat_x_minus_1),
+		DIMM_PARM(caslat_x_minus_2),
+
+		DIMM_PARM(caslat_lowest_derated),
+
+		DIMM_PARM(trcd_ps),
+		DIMM_PARM(trp_ps),
+		DIMM_PARM(tras_ps),
+		DIMM_PARM(twr_ps),
+		DIMM_PARM(twtr_ps),
+		DIMM_PARM(trfc_ps),
+		DIMM_PARM(trrd_ps),
+		DIMM_PARM(trc_ps),
+		DIMM_PARM(refresh_rate_ps),
+
+		DIMM_PARM(tis_ps),
+		DIMM_PARM(tih_ps),
+		DIMM_PARM(tds_ps),
+		DIMM_PARM(tdh_ps),
+		DIMM_PARM(trtp_ps),
+		DIMM_PARM(tdqsq_max_ps),
+		DIMM_PARM(tqhs_ps),
+
+		DIMM_PARM(rank_density),
+		DIMM_PARM(capacity),
+		DIMM_PARM(base_address),
+	};
+
+	static const unsigned int n_opts = ARRAY_SIZE(options);
+
+	if (handle_option_table(options, n_opts, p, optname_str, value_str))
+		return;
+
+	printf("couldn't find option string %s\n", optname_str);
+}
+
+static void print_dimm_parameters(const dimm_params_t *pdimm)
+{
+	static const struct options_string options[] = {
+		DIMM_PARM(n_ranks),
+		DIMM_PARM(data_width),
+		DIMM_PARM(primary_sdram_width),
+		DIMM_PARM(ec_sdram_width),
+		DIMM_PARM(registered_dimm),
+		DIMM_PARM(device_width),
+
+		DIMM_PARM(n_row_addr),
+		DIMM_PARM(n_col_addr),
+		DIMM_PARM(edc_config),
+		DIMM_PARM(n_banks_per_sdram_device),
+
+		DIMM_PARM(tckmin_x_ps),
+		DIMM_PARM(tckmin_x_minus_1_ps),
+		DIMM_PARM(tckmin_x_minus_2_ps),
+		DIMM_PARM(tckmax_ps),
+
+		DIMM_PARM(caslat_x),
+		DIMM_PARM(taa_ps),
+		DIMM_PARM(caslat_x_minus_1),
+		DIMM_PARM(caslat_x_minus_2),
+		DIMM_PARM(caslat_lowest_derated),
+
+		DIMM_PARM(trcd_ps),
+		DIMM_PARM(trp_ps),
+		DIMM_PARM(tras_ps),
+		DIMM_PARM(twr_ps),
+		DIMM_PARM(twtr_ps),
+		DIMM_PARM(trfc_ps),
+		DIMM_PARM(trrd_ps),
+		DIMM_PARM(trc_ps),
+		DIMM_PARM(refresh_rate_ps),
+
+		DIMM_PARM(tis_ps),
+		DIMM_PARM(tih_ps),
+		DIMM_PARM(tds_ps),
+		DIMM_PARM(tdh_ps),
+		DIMM_PARM(trtp_ps),
+		DIMM_PARM(tdqsq_max_ps),
+		DIMM_PARM(tqhs_ps),
+	};
+	static const unsigned int n_opts = ARRAY_SIZE(options);
+
+	if (pdimm->n_ranks == 0) {
+		printf("DIMM not present\n");
+		return;
+	}
+	printf("DIMM organization parameters:\n");
+	printf("module part name = %s\n", pdimm->mpart);
+	printf("rank_density = %llu bytes (%llu megabytes)\n",
+	       pdimm->rank_density, pdimm->rank_density / 0x100000);
+	printf("capacity = %llu bytes (%llu megabytes)\n",
+	       pdimm->capacity, pdimm->capacity / 0x100000);
+	printf("burst_lengths_bitmask = %02X\n",
+	       pdimm->burst_lengths_bitmask);
+	printf("base_addresss = %llu (%08llX %08llX)\n",
+	       pdimm->base_address,
+	       (pdimm->base_address >> 32),
+	       pdimm->base_address & 0xFFFFFFFF);
+	print_option_table(options, n_opts, pdimm);
+}
+
+static void print_lowest_common_dimm_parameters(
+		const common_timing_params_t *plcd_dimm_params)
+{
+	static const struct options_string options[] = {
+		COMMON_TIMING(tckmax_max_ps),
+		COMMON_TIMING(trcd_ps),
+		COMMON_TIMING(trp_ps),
+		COMMON_TIMING(tras_ps),
+		COMMON_TIMING(twr_ps),
+		COMMON_TIMING(twtr_ps),
+		COMMON_TIMING(trfc_ps),
+		COMMON_TIMING(trrd_ps),
+		COMMON_TIMING(trc_ps),
+		COMMON_TIMING(refresh_rate_ps),
+		COMMON_TIMING(tis_ps),
+		COMMON_TIMING(tds_ps),
+		COMMON_TIMING(tdh_ps),
+		COMMON_TIMING(trtp_ps),
+		COMMON_TIMING(tdqsq_max_ps),
+		COMMON_TIMING(tqhs_ps),
+		COMMON_TIMING(lowest_common_SPD_caslat),
+		COMMON_TIMING(highest_common_derated_caslat),
+		COMMON_TIMING(additive_latency),
+		COMMON_TIMING(ndimms_present),
+		COMMON_TIMING(all_dimms_registered),
+		COMMON_TIMING(all_dimms_unbuffered),
+		COMMON_TIMING(all_dimms_ecc_capable),
+	};
+	static const unsigned int n_opts = ARRAY_SIZE(options);
+
+	/* Clock frequencies */
+	printf("tckmin_x_ps = %u (%u MHz)\n",
+	       plcd_dimm_params->tckmin_x_ps,
+	       picos_to_mhz(plcd_dimm_params->tckmin_x_ps));
+	printf("tckmax_ps = %u (%u MHz)\n",
+	       plcd_dimm_params->tckmax_ps,
+	       picos_to_mhz(plcd_dimm_params->tckmax_ps));
+	printf("all_dimms_burst_lengths_bitmask = %02X\n",
+	       plcd_dimm_params->all_dimms_burst_lengths_bitmask);
+
+	print_option_table(options, n_opts, plcd_dimm_params);
+
+	printf("total_mem = %llu (%llu megabytes)\n",
+	       plcd_dimm_params->total_mem,
+	       plcd_dimm_params->total_mem / 0x100000);
+	printf("base_address = %llu (%llu megabytes)\n",
+	       plcd_dimm_params->base_address,
+	       plcd_dimm_params->base_address / 0x100000);
+}
+
+#define CTRL_OPTIONS(x) {#x, offsetof(memctl_options_t, x), \
+	sizeof((memctl_options_t *)0)->x, 0}
+#define CTRL_OPTIONS_CS(x, y) {"cs" #x "_" #y, \
+	offsetof(memctl_options_t, cs_local_opts[x].y), \
+	sizeof((memctl_options_t *)0)->cs_local_opts[x].y, 0}
+
+static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo,
+			   unsigned int ctl_num,
+			   const char *optname_str,
+			   const char *value_str)
+{
+	memctl_options_t *p = &(pinfo->memctl_opts[ctl_num]);
+	/*
+	 * This array all on the stack and *computed* each time this
+	 * function is rung.
+	 */
+	static const struct options_string options[] = {
+		CTRL_OPTIONS_CS(0, odt_rd_cfg),
+		CTRL_OPTIONS_CS(0, odt_wr_cfg),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+		CTRL_OPTIONS_CS(1, odt_rd_cfg),
+		CTRL_OPTIONS_CS(1, odt_wr_cfg),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+		CTRL_OPTIONS_CS(2, odt_rd_cfg),
+		CTRL_OPTIONS_CS(2, odt_wr_cfg),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+		CTRL_OPTIONS_CS(3, odt_rd_cfg),
+		CTRL_OPTIONS_CS(3, odt_wr_cfg),
+#endif
+#if defined(CONFIG_SYS_FSL_DDR3)
+		CTRL_OPTIONS_CS(0, odt_rtt_norm),
+		CTRL_OPTIONS_CS(0, odt_rtt_wr),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+		CTRL_OPTIONS_CS(1, odt_rtt_norm),
+		CTRL_OPTIONS_CS(1, odt_rtt_wr),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+		CTRL_OPTIONS_CS(2, odt_rtt_norm),
+		CTRL_OPTIONS_CS(2, odt_rtt_wr),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+		CTRL_OPTIONS_CS(3, odt_rtt_norm),
+		CTRL_OPTIONS_CS(3, odt_rtt_wr),
+#endif
+#endif
+		CTRL_OPTIONS(memctl_interleaving),
+		CTRL_OPTIONS(memctl_interleaving_mode),
+		CTRL_OPTIONS(ba_intlv_ctl),
+		CTRL_OPTIONS(ecc_mode),
+		CTRL_OPTIONS(ecc_init_using_memctl),
+		CTRL_OPTIONS(dqs_config),
+		CTRL_OPTIONS(self_refresh_in_sleep),
+		CTRL_OPTIONS(dynamic_power),
+		CTRL_OPTIONS(data_bus_width),
+		CTRL_OPTIONS(burst_length),
+		CTRL_OPTIONS(cas_latency_override),
+		CTRL_OPTIONS(cas_latency_override_value),
+		CTRL_OPTIONS(use_derated_caslat),
+		CTRL_OPTIONS(additive_latency_override),
+		CTRL_OPTIONS(additive_latency_override_value),
+		CTRL_OPTIONS(clk_adjust),
+		CTRL_OPTIONS(cpo_override),
+		CTRL_OPTIONS(write_data_delay),
+		CTRL_OPTIONS(half_strength_driver_enable),
+
+		/*
+		 * These can probably be changed to 2T_EN and 3T_EN
+		 * (using a leading numerical character) without problem
+		 */
+		CTRL_OPTIONS(twot_en),
+		CTRL_OPTIONS(threet_en),
+		CTRL_OPTIONS(ap_en),
+		CTRL_OPTIONS(x4_en),
+		CTRL_OPTIONS(bstopre),
+		CTRL_OPTIONS(wrlvl_override),
+		CTRL_OPTIONS(wrlvl_sample),
+		CTRL_OPTIONS(wrlvl_start),
+		CTRL_OPTIONS(rcw_override),
+		CTRL_OPTIONS(rcw_1),
+		CTRL_OPTIONS(rcw_2),
+		CTRL_OPTIONS(ddr_cdr1),
+		CTRL_OPTIONS(ddr_cdr2),
+		CTRL_OPTIONS(tcke_clock_pulse_width_ps),
+		CTRL_OPTIONS(tfaw_window_four_activates_ps),
+		CTRL_OPTIONS(trwt_override),
+		CTRL_OPTIONS(trwt),
+	};
+
+	static const unsigned int n_opts = ARRAY_SIZE(options);
+
+	if (handle_option_table(options, n_opts, p,
+					optname_str, value_str))
+		return;
+
+	printf("couldn't find option string %s\n", optname_str);
+}
+
+#define CFG_REGS(x) {#x, offsetof(fsl_ddr_cfg_regs_t, x), \
+	sizeof((fsl_ddr_cfg_regs_t *)0)->x, 1}
+#define CFG_REGS_CS(x, y) {"cs" #x "_" #y, \
+	offsetof(fsl_ddr_cfg_regs_t, cs[x].y), \
+	sizeof((fsl_ddr_cfg_regs_t *)0)->cs[x].y, 1}
+
+static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
+{
+	unsigned int i;
+	static const struct options_string options[] = {
+		CFG_REGS_CS(0, bnds),
+		CFG_REGS_CS(0, config),
+		CFG_REGS_CS(0, config_2),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+		CFG_REGS_CS(1, bnds),
+		CFG_REGS_CS(1, config),
+		CFG_REGS_CS(1, config_2),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+		CFG_REGS_CS(2, bnds),
+		CFG_REGS_CS(2, config),
+		CFG_REGS_CS(2, config_2),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+		CFG_REGS_CS(3, bnds),
+		CFG_REGS_CS(3, config),
+		CFG_REGS_CS(3, config_2),
+#endif
+		CFG_REGS(timing_cfg_3),
+		CFG_REGS(timing_cfg_0),
+		CFG_REGS(timing_cfg_1),
+		CFG_REGS(timing_cfg_2),
+		CFG_REGS(ddr_sdram_cfg),
+		CFG_REGS(ddr_sdram_cfg_2),
+		CFG_REGS(ddr_sdram_mode),
+		CFG_REGS(ddr_sdram_mode_2),
+		CFG_REGS(ddr_sdram_mode_3),
+		CFG_REGS(ddr_sdram_mode_4),
+		CFG_REGS(ddr_sdram_mode_5),
+		CFG_REGS(ddr_sdram_mode_6),
+		CFG_REGS(ddr_sdram_mode_7),
+		CFG_REGS(ddr_sdram_mode_8),
+		CFG_REGS(ddr_sdram_interval),
+		CFG_REGS(ddr_data_init),
+		CFG_REGS(ddr_sdram_clk_cntl),
+		CFG_REGS(ddr_init_addr),
+		CFG_REGS(ddr_init_ext_addr),
+		CFG_REGS(timing_cfg_4),
+		CFG_REGS(timing_cfg_5),
+		CFG_REGS(ddr_zq_cntl),
+		CFG_REGS(ddr_wrlvl_cntl),
+		CFG_REGS(ddr_wrlvl_cntl_2),
+		CFG_REGS(ddr_wrlvl_cntl_3),
+		CFG_REGS(ddr_sr_cntr),
+		CFG_REGS(ddr_sdram_rcw_1),
+		CFG_REGS(ddr_sdram_rcw_2),
+		CFG_REGS(ddr_cdr1),
+		CFG_REGS(ddr_cdr2),
+		CFG_REGS(err_disable),
+		CFG_REGS(err_int_en),
+		CFG_REGS(ddr_eor),
+	};
+	static const unsigned int n_opts = ARRAY_SIZE(options);
+
+	print_option_table(options, n_opts, ddr);
+
+	for (i = 0; i < 32; i++)
+		printf("debug_%02d = 0x%08X\n", i+1, ddr->debug[i]);
+}
+
+static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo,
+			unsigned int ctrl_num,
+			const char *regname,
+			const char *value_str)
+{
+	unsigned int i;
+	fsl_ddr_cfg_regs_t *ddr;
+	char buf[20];
+	static const struct options_string options[] = {
+		CFG_REGS_CS(0, bnds),
+		CFG_REGS_CS(0, config),
+		CFG_REGS_CS(0, config_2),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+		CFG_REGS_CS(1, bnds),
+		CFG_REGS_CS(1, config),
+		CFG_REGS_CS(1, config_2),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+		CFG_REGS_CS(2, bnds),
+		CFG_REGS_CS(2, config),
+		CFG_REGS_CS(2, config_2),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 3)
+		CFG_REGS_CS(3, bnds),
+		CFG_REGS_CS(3, config),
+		CFG_REGS_CS(3, config_2),
+#endif
+		CFG_REGS(timing_cfg_3),
+		CFG_REGS(timing_cfg_0),
+		CFG_REGS(timing_cfg_1),
+		CFG_REGS(timing_cfg_2),
+		CFG_REGS(ddr_sdram_cfg),
+		CFG_REGS(ddr_sdram_cfg_2),
+		CFG_REGS(ddr_sdram_mode),
+		CFG_REGS(ddr_sdram_mode_2),
+		CFG_REGS(ddr_sdram_mode_3),
+		CFG_REGS(ddr_sdram_mode_4),
+		CFG_REGS(ddr_sdram_mode_5),
+		CFG_REGS(ddr_sdram_mode_6),
+		CFG_REGS(ddr_sdram_mode_7),
+		CFG_REGS(ddr_sdram_mode_8),
+		CFG_REGS(ddr_sdram_interval),
+		CFG_REGS(ddr_data_init),
+		CFG_REGS(ddr_sdram_clk_cntl),
+		CFG_REGS(ddr_init_addr),
+		CFG_REGS(ddr_init_ext_addr),
+		CFG_REGS(timing_cfg_4),
+		CFG_REGS(timing_cfg_5),
+		CFG_REGS(ddr_zq_cntl),
+		CFG_REGS(ddr_wrlvl_cntl),
+		CFG_REGS(ddr_wrlvl_cntl_2),
+		CFG_REGS(ddr_wrlvl_cntl_3),
+		CFG_REGS(ddr_sr_cntr),
+		CFG_REGS(ddr_sdram_rcw_1),
+		CFG_REGS(ddr_sdram_rcw_2),
+		CFG_REGS(ddr_cdr1),
+		CFG_REGS(ddr_cdr2),
+		CFG_REGS(err_disable),
+		CFG_REGS(err_int_en),
+		CFG_REGS(ddr_sdram_rcw_2),
+		CFG_REGS(ddr_sdram_rcw_2),
+		CFG_REGS(ddr_eor),
+	};
+	static const unsigned int n_opts = ARRAY_SIZE(options);
+
+	debug("fsl_ddr_regs_edit: ctrl_num = %u, "
+		"regname = %s, value = %s\n",
+		ctrl_num, regname, value_str);
+	if (ctrl_num > CONFIG_NUM_DDR_CONTROLLERS)
+		return;
+
+	ddr = &(pinfo->fsl_ddr_config_reg[ctrl_num]);
+
+	if (handle_option_table(options, n_opts, ddr, regname, value_str))
+		return;
+
+	for (i = 0; i < 32; i++) {
+		unsigned int value = simple_strtoul(value_str, NULL, 0);
+		sprintf(buf, "debug_%u", i + 1);
+		if (strcmp(buf, regname) == 0) {
+			ddr->debug[i] = value;
+			return;
+		}
+	}
+	printf("Error: couldn't find register string %s\n", regname);
+}
+
+#define CTRL_OPTIONS_HEX(x) {#x, offsetof(memctl_options_t, x), \
+	sizeof((memctl_options_t *)0)->x, 1}
+
+static void print_memctl_options(const memctl_options_t *popts)
+{
+	static const struct options_string options[] = {
+		CTRL_OPTIONS_CS(0, odt_rd_cfg),
+		CTRL_OPTIONS_CS(0, odt_wr_cfg),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+		CTRL_OPTIONS_CS(1, odt_rd_cfg),
+		CTRL_OPTIONS_CS(1, odt_wr_cfg),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+		CTRL_OPTIONS_CS(2, odt_rd_cfg),
+		CTRL_OPTIONS_CS(2, odt_wr_cfg),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 3)
+		CTRL_OPTIONS_CS(3, odt_rd_cfg),
+		CTRL_OPTIONS_CS(3, odt_wr_cfg),
+#endif
+#if defined(CONFIG_SYS_FSL_DDR3)
+		CTRL_OPTIONS_CS(0, odt_rtt_norm),
+		CTRL_OPTIONS_CS(0, odt_rtt_wr),
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 1)
+		CTRL_OPTIONS_CS(1, odt_rtt_norm),
+		CTRL_OPTIONS_CS(1, odt_rtt_wr),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 2)
+		CTRL_OPTIONS_CS(2, odt_rtt_norm),
+		CTRL_OPTIONS_CS(2, odt_rtt_wr),
+#endif
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 3)
+		CTRL_OPTIONS_CS(3, odt_rtt_norm),
+		CTRL_OPTIONS_CS(3, odt_rtt_wr),
+#endif
+#endif
+		CTRL_OPTIONS(memctl_interleaving),
+		CTRL_OPTIONS(memctl_interleaving_mode),
+		CTRL_OPTIONS_HEX(ba_intlv_ctl),
+		CTRL_OPTIONS(ecc_mode),
+		CTRL_OPTIONS(ecc_init_using_memctl),
+		CTRL_OPTIONS(dqs_config),
+		CTRL_OPTIONS(self_refresh_in_sleep),
+		CTRL_OPTIONS(dynamic_power),
+		CTRL_OPTIONS(data_bus_width),
+		CTRL_OPTIONS(burst_length),
+		CTRL_OPTIONS(cas_latency_override),
+		CTRL_OPTIONS(cas_latency_override_value),
+		CTRL_OPTIONS(use_derated_caslat),
+		CTRL_OPTIONS(additive_latency_override),
+		CTRL_OPTIONS(additive_latency_override_value),
+		CTRL_OPTIONS(clk_adjust),
+		CTRL_OPTIONS(cpo_override),
+		CTRL_OPTIONS(write_data_delay),
+		CTRL_OPTIONS(half_strength_driver_enable),
+		/*
+		 * These can probably be changed to 2T_EN and 3T_EN
+		 * (using a leading numerical character) without problem
+		 */
+		CTRL_OPTIONS(twot_en),
+		CTRL_OPTIONS(threet_en),
+		CTRL_OPTIONS(registered_dimm_en),
+		CTRL_OPTIONS(ap_en),
+		CTRL_OPTIONS(x4_en),
+		CTRL_OPTIONS(bstopre),
+		CTRL_OPTIONS(wrlvl_override),
+		CTRL_OPTIONS(wrlvl_sample),
+		CTRL_OPTIONS(wrlvl_start),
+		CTRL_OPTIONS(rcw_override),
+		CTRL_OPTIONS(rcw_1),
+		CTRL_OPTIONS(rcw_2),
+		CTRL_OPTIONS_HEX(ddr_cdr1),
+		CTRL_OPTIONS_HEX(ddr_cdr2),
+		CTRL_OPTIONS(tcke_clock_pulse_width_ps),
+		CTRL_OPTIONS(tfaw_window_four_activates_ps),
+		CTRL_OPTIONS(trwt_override),
+		CTRL_OPTIONS(trwt),
+	};
+	static const unsigned int n_opts = ARRAY_SIZE(options);
+
+	print_option_table(options, n_opts, popts);
+}
+
+#ifdef CONFIG_SYS_FSL_DDR1
+void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd)
+{
+	unsigned int i;
+
+	printf("%-3d    : %02x %s\n", 0, spd->info_size,
+	       " spd->info_size,   *  0 # bytes written into serial memory *");
+	printf("%-3d    : %02x %s\n", 1, spd->chip_size,
+	       " spd->chip_size,   *  1 Total # bytes of SPD memory device *");
+	printf("%-3d    : %02x %s\n", 2, spd->mem_type,
+	       " spd->mem_type,    *  2 Fundamental memory type *");
+	printf("%-3d    : %02x %s\n", 3, spd->nrow_addr,
+	       " spd->nrow_addr,   *  3 # of Row Addresses on this assembly *");
+	printf("%-3d    : %02x %s\n", 4, spd->ncol_addr,
+	       " spd->ncol_addr,   *  4 # of Column Addrs on this assembly *");
+	printf("%-3d    : %02x %s\n", 5, spd->nrows,
+	       " spd->nrows        *  5 # of DIMM Banks *");
+	printf("%-3d    : %02x %s\n", 6, spd->dataw_lsb,
+	       " spd->dataw_lsb,   *  6 Data Width lsb of this assembly *");
+	printf("%-3d    : %02x %s\n", 7, spd->dataw_msb,
+	       " spd->dataw_msb,   *  7 Data Width msb of this assembly *");
+	printf("%-3d    : %02x %s\n", 8, spd->voltage,
+	       " spd->voltage,     *  8 Voltage intf std of this assembly *");
+	printf("%-3d    : %02x %s\n", 9, spd->clk_cycle,
+	       " spd->clk_cycle,   *  9 SDRAM Cycle time at CL=X *");
+	printf("%-3d    : %02x %s\n", 10, spd->clk_access,
+	       " spd->clk_access,  * 10 SDRAM Access from Clock at CL=X *");
+	printf("%-3d    : %02x %s\n", 11, spd->config,
+	       " spd->config,      * 11 DIMM Configuration type *");
+	printf("%-3d    : %02x %s\n", 12, spd->refresh,
+	       " spd->refresh,     * 12 Refresh Rate/Type *");
+	printf("%-3d    : %02x %s\n", 13, spd->primw,
+	       " spd->primw,       * 13 Primary SDRAM Width *");
+	printf("%-3d    : %02x %s\n", 14, spd->ecw,
+	       " spd->ecw,         * 14 Error Checking SDRAM width *");
+	printf("%-3d    : %02x %s\n", 15, spd->min_delay,
+	       " spd->min_delay,   * 15 Back to Back Random Access *");
+	printf("%-3d    : %02x %s\n", 16, spd->burstl,
+	       " spd->burstl,      * 16 Burst Lengths Supported *");
+	printf("%-3d    : %02x %s\n", 17, spd->nbanks,
+	       " spd->nbanks,      * 17 # of Banks on Each SDRAM Device *");
+	printf("%-3d    : %02x %s\n", 18, spd->cas_lat,
+	       " spd->cas_lat,     * 18 CAS# Latencies Supported *");
+	printf("%-3d    : %02x %s\n", 19, spd->cs_lat,
+	       " spd->cs_lat,      * 19 Chip Select Latency *");
+	printf("%-3d    : %02x %s\n", 20, spd->write_lat,
+	       " spd->write_lat,   * 20 Write Latency/Recovery *");
+	printf("%-3d    : %02x %s\n", 21, spd->mod_attr,
+	       " spd->mod_attr,    * 21 SDRAM Module Attributes *");
+	printf("%-3d    : %02x %s\n", 22, spd->dev_attr,
+	       " spd->dev_attr,    * 22 SDRAM Device Attributes *");
+	printf("%-3d    : %02x %s\n", 23, spd->clk_cycle2,
+	       " spd->clk_cycle2,  * 23 Min SDRAM Cycle time at CL=X-1 *");
+	printf("%-3d    : %02x %s\n", 24, spd->clk_access2,
+	       " spd->clk_access2, * 24 SDRAM Access from Clock at CL=X-1 *");
+	printf("%-3d    : %02x %s\n", 25, spd->clk_cycle3,
+	       " spd->clk_cycle3,  * 25 Min SDRAM Cycle time at CL=X-2 *");
+	printf("%-3d    : %02x %s\n", 26, spd->clk_access3,
+	       " spd->clk_access3, * 26 Max Access from Clock at CL=X-2 *");
+	printf("%-3d    : %02x %s\n", 27, spd->trp,
+	       " spd->trp,         * 27 Min Row Precharge Time (tRP)*");
+	printf("%-3d    : %02x %s\n", 28, spd->trrd,
+	       " spd->trrd,        * 28 Min Row Active to Row Active (tRRD) *");
+	printf("%-3d    : %02x %s\n", 29, spd->trcd,
+	       " spd->trcd,        * 29 Min RAS to CAS Delay (tRCD) *");
+	printf("%-3d    : %02x %s\n", 30, spd->tras,
+	       " spd->tras,        * 30 Minimum RAS Pulse Width (tRAS) *");
+	printf("%-3d    : %02x %s\n", 31, spd->bank_dens,
+	       " spd->bank_dens,   * 31 Density of each bank on module *");
+	printf("%-3d    : %02x %s\n", 32, spd->ca_setup,
+	       " spd->ca_setup,    * 32 Cmd + Addr signal input setup time *");
+	printf("%-3d    : %02x %s\n", 33, spd->ca_hold,
+	       " spd->ca_hold,     * 33 Cmd and Addr signal input hold time *");
+	printf("%-3d    : %02x %s\n", 34, spd->data_setup,
+	       " spd->data_setup,  * 34 Data signal input setup time *");
+	printf("%-3d    : %02x %s\n", 35, spd->data_hold,
+	       " spd->data_hold,   * 35 Data signal input hold time *");
+	printf("%-3d    : %02x %s\n", 36, spd->res_36_40[0],
+	       " spd->res_36_40[0], * 36 Reserved / tWR *");
+	printf("%-3d    : %02x %s\n", 37, spd->res_36_40[1],
+	       " spd->res_36_40[1], * 37 Reserved / tWTR *");
+	printf("%-3d    : %02x %s\n", 38, spd->res_36_40[2],
+	       " spd->res_36_40[2], * 38 Reserved / tRTP *");
+	printf("%-3d    : %02x %s\n", 39, spd->res_36_40[3],
+	       " spd->res_36_40[3], * 39 Reserved / mem_probe *");
+	printf("%-3d    : %02x %s\n", 40, spd->res_36_40[4],
+	       " spd->res_36_40[4], * 40 Reserved / trc,trfc extensions *");
+	printf("%-3d    : %02x %s\n", 41, spd->trc,
+	       " spd->trc,         * 41 Min Active to Auto refresh time tRC *");
+	printf("%-3d    : %02x %s\n", 42, spd->trfc,
+	       " spd->trfc,        * 42 Min Auto to Active period tRFC *");
+	printf("%-3d    : %02x %s\n", 43, spd->tckmax,
+	       " spd->tckmax,      * 43 Max device cycle time tCKmax *");
+	printf("%-3d    : %02x %s\n", 44, spd->tdqsq,
+	       " spd->tdqsq,       * 44 Max DQS to DQ skew *");
+	printf("%-3d    : %02x %s\n", 45, spd->tqhs,
+	       " spd->tqhs,        * 45 Max Read DataHold skew tQHS *");
+	printf("%-3d    : %02x %s\n", 46, spd->res_46,
+	       " spd->res_46,  * 46 Reserved/ PLL Relock time *");
+	printf("%-3d    : %02x %s\n", 47, spd->dimm_height,
+	       " spd->dimm_height  * 47 SDRAM DIMM Height *");
+
+	printf("%-3d-%3d: ",  48, 61);
+
+	for (i = 0; i < 14; i++)
+		printf("%02x", spd->res_48_61[i]);
+
+	printf(" * 48-61 IDD in SPD and Reserved space *\n");
+
+	printf("%-3d    : %02x %s\n", 62, spd->spd_rev,
+	       " spd->spd_rev,     * 62 SPD Data Revision Code *");
+	printf("%-3d    : %02x %s\n", 63, spd->cksum,
+	       " spd->cksum,       * 63 Checksum for bytes 0-62 *");
+	printf("%-3d-%3d: ",  64, 71);
+
+	for (i = 0; i < 8; i++)
+		printf("%02x", spd->mid[i]);
+
+	printf("* 64 Mfr's JEDEC ID code per JEP-108E *\n");
+	printf("%-3d    : %02x %s\n", 72, spd->mloc,
+	       " spd->mloc,        * 72 Manufacturing Location *");
+
+	printf("%-3d-%3d: >>",  73, 90);
+
+	for (i = 0; i < 18; i++)
+		printf("%c", spd->mpart[i]);
+
+	printf("<<* 73 Manufacturer's Part Number *\n");
+
+	printf("%-3d-%3d: %02x %02x %s\n", 91, 92, spd->rev[0], spd->rev[1],
+	       "* 91 Revision Code *");
+	printf("%-3d-%3d: %02x %02x %s\n", 93, 94, spd->mdate[0], spd->mdate[1],
+	       "* 93 Manufacturing Date *");
+	printf("%-3d-%3d: ", 95, 98);
+
+	for (i = 0; i < 4; i++)
+		printf("%02x", spd->sernum[i]);
+
+	printf("* 95 Assembly Serial Number *\n");
+
+	printf("%-3d-%3d: ", 99, 127);
+
+	for (i = 0; i < 27; i++)
+		printf("%02x", spd->mspec[i]);
+
+	printf("* 99 Manufacturer Specific Data *\n");
+}
+#endif
+
+#ifdef CONFIG_SYS_FSL_DDR2
+void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd)
+{
+	unsigned int i;
+
+	printf("%-3d    : %02x %s\n", 0, spd->info_size,
+	       " spd->info_size,   *  0 # bytes written into serial memory *");
+	printf("%-3d    : %02x %s\n", 1, spd->chip_size,
+	       " spd->chip_size,   *  1 Total # bytes of SPD memory device *");
+	printf("%-3d    : %02x %s\n", 2, spd->mem_type,
+	       " spd->mem_type,    *  2 Fundamental memory type *");
+	printf("%-3d    : %02x %s\n", 3, spd->nrow_addr,
+	       " spd->nrow_addr,   *  3 # of Row Addresses on this assembly *");
+	printf("%-3d    : %02x %s\n", 4, spd->ncol_addr,
+	       " spd->ncol_addr,   *  4 # of Column Addrs on this assembly *");
+	printf("%-3d    : %02x %s\n", 5, spd->mod_ranks,
+	       " spd->mod_ranks    *  5 # of Module Rows on this assembly *");
+	printf("%-3d    : %02x %s\n", 6, spd->dataw,
+	       " spd->dataw,       *  6 Data Width of this assembly *");
+	printf("%-3d    : %02x %s\n", 7, spd->res_7,
+	       " spd->res_7,       *  7 Reserved *");
+	printf("%-3d    : %02x %s\n", 8, spd->voltage,
+	       " spd->voltage,     *  8 Voltage intf std of this assembly *");
+	printf("%-3d    : %02x %s\n", 9, spd->clk_cycle,
+	       " spd->clk_cycle,   *  9 SDRAM Cycle time at CL=X *");
+	printf("%-3d    : %02x %s\n", 10, spd->clk_access,
+	       " spd->clk_access,  * 10 SDRAM Access from Clock at CL=X *");
+	printf("%-3d    : %02x %s\n", 11, spd->config,
+	       " spd->config,      * 11 DIMM Configuration type *");
+	printf("%-3d    : %02x %s\n", 12, spd->refresh,
+	       " spd->refresh,     * 12 Refresh Rate/Type *");
+	printf("%-3d    : %02x %s\n", 13, spd->primw,
+	       " spd->primw,       * 13 Primary SDRAM Width *");
+	printf("%-3d    : %02x %s\n", 14, spd->ecw,
+	       " spd->ecw,         * 14 Error Checking SDRAM width *");
+	printf("%-3d    : %02x %s\n", 15, spd->res_15,
+	       " spd->res_15,      * 15 Reserved *");
+	printf("%-3d    : %02x %s\n", 16, spd->burstl,
+	       " spd->burstl,      * 16 Burst Lengths Supported *");
+	printf("%-3d    : %02x %s\n", 17, spd->nbanks,
+	       " spd->nbanks,      * 17 # of Banks on Each SDRAM Device *");
+	printf("%-3d    : %02x %s\n", 18, spd->cas_lat,
+	       " spd->cas_lat,     * 18 CAS# Latencies Supported *");
+	printf("%-3d    : %02x %s\n", 19, spd->mech_char,
+	       " spd->mech_char,   * 19 Mechanical Characteristics *");
+	printf("%-3d    : %02x %s\n", 20, spd->dimm_type,
+	       " spd->dimm_type,   * 20 DIMM type *");
+	printf("%-3d    : %02x %s\n", 21, spd->mod_attr,
+	       " spd->mod_attr,    * 21 SDRAM Module Attributes *");
+	printf("%-3d    : %02x %s\n", 22, spd->dev_attr,
+	       " spd->dev_attr,    * 22 SDRAM Device Attributes *");
+	printf("%-3d    : %02x %s\n", 23, spd->clk_cycle2,
+	       " spd->clk_cycle2,  * 23 Min SDRAM Cycle time at CL=X-1 *");
+	printf("%-3d    : %02x %s\n", 24, spd->clk_access2,
+	       " spd->clk_access2, * 24 SDRAM Access from Clock at CL=X-1 *");
+	printf("%-3d    : %02x %s\n", 25, spd->clk_cycle3,
+	       " spd->clk_cycle3,  * 25 Min SDRAM Cycle time at CL=X-2 *");
+	printf("%-3d    : %02x %s\n", 26, spd->clk_access3,
+	       " spd->clk_access3, * 26 Max Access from Clock at CL=X-2 *");
+	printf("%-3d    : %02x %s\n", 27, spd->trp,
+	       " spd->trp,         * 27 Min Row Precharge Time (tRP)*");
+	printf("%-3d    : %02x %s\n", 28, spd->trrd,
+	       " spd->trrd,        * 28 Min Row Active to Row Active (tRRD) *");
+	printf("%-3d    : %02x %s\n", 29, spd->trcd,
+	       " spd->trcd,        * 29 Min RAS to CAS Delay (tRCD) *");
+	printf("%-3d    : %02x %s\n", 30, spd->tras,
+	       " spd->tras,        * 30 Minimum RAS Pulse Width (tRAS) *");
+	printf("%-3d    : %02x %s\n", 31, spd->rank_dens,
+	       " spd->rank_dens,   * 31 Density of each rank on module *");
+	printf("%-3d    : %02x %s\n", 32, spd->ca_setup,
+	       " spd->ca_setup,    * 32 Cmd + Addr signal input setup time *");
+	printf("%-3d    : %02x %s\n", 33, spd->ca_hold,
+	       " spd->ca_hold,     * 33 Cmd and Addr signal input hold time *");
+	printf("%-3d    : %02x %s\n", 34, spd->data_setup,
+	       " spd->data_setup,  * 34 Data signal input setup time *");
+	printf("%-3d    : %02x %s\n", 35, spd->data_hold,
+	       " spd->data_hold,   * 35 Data signal input hold time *");
+	printf("%-3d    : %02x %s\n", 36, spd->twr,
+	       " spd->twr,         * 36 Write Recovery time tWR *");
+	printf("%-3d    : %02x %s\n", 37, spd->twtr,
+	       " spd->twtr,        * 37 Int write to read delay tWTR *");
+	printf("%-3d    : %02x %s\n", 38, spd->trtp,
+	       " spd->trtp,        * 38 Int read to precharge delay tRTP *");
+	printf("%-3d    : %02x %s\n", 39, spd->mem_probe,
+	       " spd->mem_probe,   * 39 Mem analysis probe characteristics *");
+	printf("%-3d    : %02x %s\n", 40, spd->trctrfc_ext,
+	       " spd->trctrfc_ext, * 40 Extensions to trc and trfc *");
+	printf("%-3d    : %02x %s\n", 41, spd->trc,
+	       " spd->trc,         * 41 Min Active to Auto refresh time tRC *");
+	printf("%-3d    : %02x %s\n", 42, spd->trfc,
+	       " spd->trfc,        * 42 Min Auto to Active period tRFC *");
+	printf("%-3d    : %02x %s\n", 43, spd->tckmax,
+	       " spd->tckmax,      * 43 Max device cycle time tCKmax *");
+	printf("%-3d    : %02x %s\n", 44, spd->tdqsq,
+	       " spd->tdqsq,       * 44 Max DQS to DQ skew *");
+	printf("%-3d    : %02x %s\n", 45, spd->tqhs,
+	       " spd->tqhs,        * 45 Max Read DataHold skew tQHS *");
+	printf("%-3d    : %02x %s\n", 46, spd->pll_relock,
+	       " spd->pll_relock,  * 46 PLL Relock time *");
+	printf("%-3d    : %02x %s\n", 47, spd->t_casemax,
+	       " spd->t_casemax,    * 47 t_casemax *");
+	printf("%-3d    : %02x %s\n", 48, spd->psi_ta_dram,
+	       " spd->psi_ta_dram,   * 48 Thermal Resistance of DRAM Package "
+	       "from Top (Case) to Ambient (Psi T-A DRAM) *");
+	printf("%-3d    : %02x %s\n", 49, spd->dt0_mode,
+	       " spd->dt0_mode,    * 49 DRAM Case Temperature Rise from "
+	       "Ambient due to Activate-Precharge/Mode Bits "
+	       "(DT0/Mode Bits) *)");
+	printf("%-3d    : %02x %s\n", 50, spd->dt2n_dt2q,
+	       " spd->dt2n_dt2q,   * 50 DRAM Case Temperature Rise from "
+	       "Ambient due to Precharge/Quiet Standby "
+	       "(DT2N/DT2Q) *");
+	printf("%-3d    : %02x %s\n", 51, spd->dt2p,
+	       " spd->dt2p,        * 51 DRAM Case Temperature Rise from "
+	       "Ambient due to Precharge Power-Down (DT2P) *");
+	printf("%-3d    : %02x %s\n", 52, spd->dt3n,
+	       " spd->dt3n,        * 52 DRAM Case Temperature Rise from "
+	       "Ambient due to Active Standby (DT3N) *");
+	printf("%-3d    : %02x %s\n", 53, spd->dt3pfast,
+	       " spd->dt3pfast,    * 53 DRAM Case Temperature Rise from "
+	       "Ambient due to Active Power-Down with Fast PDN Exit "
+	       "(DT3Pfast) *");
+	printf("%-3d    : %02x %s\n", 54, spd->dt3pslow,
+	       " spd->dt3pslow,    * 54 DRAM Case Temperature Rise from "
+	       "Ambient due to Active Power-Down with Slow PDN Exit "
+	       "(DT3Pslow) *");
+	printf("%-3d    : %02x %s\n", 55, spd->dt4r_dt4r4w,
+	       " spd->dt4r_dt4r4w, * 55 DRAM Case Temperature Rise from "
+	       "Ambient due to Page Open Burst Read/DT4R4W Mode Bit "
+	       "(DT4R/DT4R4W Mode Bit) *");
+	printf("%-3d    : %02x %s\n", 56, spd->dt5b,
+	       " spd->dt5b,        * 56 DRAM Case Temperature Rise from "
+	       "Ambient due to Burst Refresh (DT5B) *");
+	printf("%-3d    : %02x %s\n", 57, spd->dt7,
+	       " spd->dt7,         * 57 DRAM Case Temperature Rise from "
+	       "Ambient due to Bank Interleave Reads with "
+	       "Auto-Precharge (DT7) *");
+	printf("%-3d    : %02x %s\n", 58, spd->psi_ta_pll,
+	       " spd->psi_ta_pll,    * 58 Thermal Resistance of PLL Package form"
+	       " Top (Case) to Ambient (Psi T-A PLL) *");
+	printf("%-3d    : %02x %s\n", 59, spd->psi_ta_reg,
+	       " spd->psi_ta_reg,    * 59 Thermal Reisitance of Register Package"
+	       " from Top (Case) to Ambient (Psi T-A Register) *");
+	printf("%-3d    : %02x %s\n", 60, spd->dtpllactive,
+	       " spd->dtpllactive, * 60 PLL Case Temperature Rise from "
+	       "Ambient due to PLL Active (DT PLL Active) *");
+	printf("%-3d    : %02x %s\n", 61, spd->dtregact,
+	       " spd->dtregact,    "
+	       "* 61 Register Case Temperature Rise from Ambient due to "
+	       "Register Active/Mode Bit (DT Register Active/Mode Bit) *");
+	printf("%-3d    : %02x %s\n", 62, spd->spd_rev,
+	       " spd->spd_rev,     * 62 SPD Data Revision Code *");
+	printf("%-3d    : %02x %s\n", 63, spd->cksum,
+	       " spd->cksum,       * 63 Checksum for bytes 0-62 *");
+
+	printf("%-3d-%3d: ",  64, 71);
+
+	for (i = 0; i < 8; i++)
+		printf("%02x", spd->mid[i]);
+
+	printf("* 64 Mfr's JEDEC ID code per JEP-108E *\n");
+
+	printf("%-3d    : %02x %s\n", 72, spd->mloc,
+	       " spd->mloc,        * 72 Manufacturing Location *");
+
+	printf("%-3d-%3d: >>",  73, 90);
+	for (i = 0; i < 18; i++)
+		printf("%c", spd->mpart[i]);
+
+
+	printf("<<* 73 Manufacturer's Part Number *\n");
+
+	printf("%-3d-%3d: %02x %02x %s\n", 91, 92, spd->rev[0], spd->rev[1],
+	       "* 91 Revision Code *");
+	printf("%-3d-%3d: %02x %02x %s\n", 93, 94, spd->mdate[0], spd->mdate[1],
+	       "* 93 Manufacturing Date *");
+	printf("%-3d-%3d: ", 95, 98);
+
+	for (i = 0; i < 4; i++)
+		printf("%02x", spd->sernum[i]);
+
+	printf("* 95 Assembly Serial Number *\n");
+
+	printf("%-3d-%3d: ", 99, 127);
+	for (i = 0; i < 27; i++)
+		printf("%02x", spd->mspec[i]);
+
+
+	printf("* 99 Manufacturer Specific Data *\n");
+}
+#endif
+
+#ifdef CONFIG_SYS_FSL_DDR3
+void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd)
+{
+	unsigned int i;
+
+	/* General Section: Bytes 0-59 */
+
+#define PRINT_NXS(x, y, z...) printf("%-3d    : %02x " z "\n", x, (u8)y);
+#define PRINT_NNXXS(n0, n1, x0, x1, s) \
+	printf("%-3d-%3d: %02x %02x " s "\n", n0, n1, x0, x1);
+
+	PRINT_NXS(0, spd->info_size_crc,
+		"info_size_crc  bytes written into serial memory, "
+		"CRC coverage");
+	PRINT_NXS(1, spd->spd_rev,
+		"spd_rev        SPD Revision");
+	PRINT_NXS(2, spd->mem_type,
+		"mem_type       Key Byte / DRAM Device Type");
+	PRINT_NXS(3, spd->module_type,
+		"module_type    Key Byte / Module Type");
+	PRINT_NXS(4, spd->density_banks,
+		"density_banks  SDRAM Density and Banks");
+	PRINT_NXS(5, spd->addressing,
+		"addressing     SDRAM Addressing");
+	PRINT_NXS(6, spd->module_vdd,
+		"module_vdd     Module Nominal Voltage, VDD");
+	PRINT_NXS(7, spd->organization,
+		"organization   Module Organization");
+	PRINT_NXS(8, spd->bus_width,
+		"bus_width      Module Memory Bus Width");
+	PRINT_NXS(9, spd->ftb_div,
+		"ftb_div        Fine Timebase (FTB) Dividend / Divisor");
+	PRINT_NXS(10, spd->mtb_dividend,
+		"mtb_dividend   Medium Timebase (MTB) Dividend");
+	PRINT_NXS(11, spd->mtb_divisor,
+		"mtb_divisor    Medium Timebase (MTB) Divisor");
+	PRINT_NXS(12, spd->tck_min,
+		  "tck_min        SDRAM Minimum Cycle Time");
+	PRINT_NXS(13, spd->res_13,
+		"res_13         Reserved");
+	PRINT_NXS(14, spd->caslat_lsb,
+		"caslat_lsb     CAS Latencies Supported, LSB");
+	PRINT_NXS(15, spd->caslat_msb,
+		"caslat_msb     CAS Latencies Supported, MSB");
+	PRINT_NXS(16, spd->taa_min,
+		  "taa_min        Min CAS Latency Time");
+	PRINT_NXS(17, spd->twr_min,
+		  "twr_min        Min Write REcovery Time");
+	PRINT_NXS(18, spd->trcd_min,
+		  "trcd_min       Min RAS# to CAS# Delay Time");
+	PRINT_NXS(19, spd->trrd_min,
+		  "trrd_min       Min Row Active to Row Active Delay Time");
+	PRINT_NXS(20, spd->trp_min,
+		  "trp_min        Min Row Precharge Delay Time");
+	PRINT_NXS(21, spd->tras_trc_ext,
+		  "tras_trc_ext   Upper Nibbles for tRAS and tRC");
+	PRINT_NXS(22, spd->tras_min_lsb,
+		  "tras_min_lsb   Min Active to Precharge Delay Time, LSB");
+	PRINT_NXS(23, spd->trc_min_lsb,
+		  "trc_min_lsb Min Active to Active/Refresh Delay Time, LSB");
+	PRINT_NXS(24, spd->trfc_min_lsb,
+		  "trfc_min_lsb   Min Refresh Recovery Delay Time LSB");
+	PRINT_NXS(25, spd->trfc_min_msb,
+		  "trfc_min_msb   Min Refresh Recovery Delay Time MSB");
+	PRINT_NXS(26, spd->twtr_min,
+		  "twtr_min Min Internal Write to Read Command Delay Time");
+	PRINT_NXS(27, spd->trtp_min,
+		  "trtp_min "
+		  "Min Internal Read to Precharge Command Delay Time");
+	PRINT_NXS(28, spd->tfaw_msb,
+		  "tfaw_msb       Upper Nibble for tFAW");
+	PRINT_NXS(29, spd->tfaw_min,
+		  "tfaw_min       Min Four Activate Window Delay Time");
+	PRINT_NXS(30, spd->opt_features,
+		"opt_features   SDRAM Optional Features");
+	PRINT_NXS(31, spd->therm_ref_opt,
+		"therm_ref_opt  SDRAM Thermal and Refresh Opts");
+	PRINT_NXS(32, spd->therm_sensor,
+		"therm_sensor  SDRAM Thermal Sensor");
+	PRINT_NXS(33, spd->device_type,
+		"device_type  SDRAM Device Type");
+	PRINT_NXS(34, spd->fine_tck_min,
+		  "fine_tck_min  Fine offset for tCKmin");
+	PRINT_NXS(35, spd->fine_taa_min,
+		  "fine_taa_min  Fine offset for tAAmin");
+	PRINT_NXS(36, spd->fine_trcd_min,
+		  "fine_trcd_min Fine offset for tRCDmin");
+	PRINT_NXS(37, spd->fine_trp_min,
+		  "fine_trp_min  Fine offset for tRPmin");
+	PRINT_NXS(38, spd->fine_trc_min,
+		  "fine_trc_min  Fine offset for tRCmin");
+
+	printf("%-3d-%3d: ",  39, 59);  /* Reserved, General Section */
+
+	for (i = 39; i <= 59; i++)
+		printf("%02x ", spd->res_39_59[i - 39]);
+
+	puts("\n");
+
+	switch (spd->module_type) {
+	case 0x02:  /* UDIMM */
+	case 0x03:  /* SO-DIMM */
+	case 0x04:  /* Micro-DIMM */
+	case 0x06:  /* Mini-UDIMM */
+		PRINT_NXS(60, spd->mod_section.unbuffered.mod_height,
+			"mod_height    (Unbuffered) Module Nominal Height");
+		PRINT_NXS(61, spd->mod_section.unbuffered.mod_thickness,
+			"mod_thickness (Unbuffered) Module Maximum Thickness");
+		PRINT_NXS(62, spd->mod_section.unbuffered.ref_raw_card,
+			"ref_raw_card  (Unbuffered) Reference Raw Card Used");
+		PRINT_NXS(63, spd->mod_section.unbuffered.addr_mapping,
+			"addr_mapping  (Unbuffered) Address mapping from "
+			"Edge Connector to DRAM");
+		break;
+	case 0x01:  /* RDIMM */
+	case 0x05:  /* Mini-RDIMM */
+		PRINT_NXS(60, spd->mod_section.registered.mod_height,
+			"mod_height    (Registered) Module Nominal Height");
+		PRINT_NXS(61, spd->mod_section.registered.mod_thickness,
+			"mod_thickness (Registered) Module Maximum Thickness");
+		PRINT_NXS(62, spd->mod_section.registered.ref_raw_card,
+			"ref_raw_card  (Registered) Reference Raw Card Used");
+		PRINT_NXS(63, spd->mod_section.registered.modu_attr,
+			"modu_attr     (Registered) DIMM Module Attributes");
+		PRINT_NXS(64, spd->mod_section.registered.thermal,
+			"thermal       (Registered) Thermal Heat "
+			"Spreader Solution");
+		PRINT_NXS(65, spd->mod_section.registered.reg_id_lo,
+			"reg_id_lo     (Registered) Register Manufacturer ID "
+			"Code, LSB");
+		PRINT_NXS(66, spd->mod_section.registered.reg_id_hi,
+			"reg_id_hi     (Registered) Register Manufacturer ID "
+			"Code, MSB");
+		PRINT_NXS(67, spd->mod_section.registered.reg_rev,
+			"reg_rev       (Registered) Register "
+			"Revision Number");
+		PRINT_NXS(68, spd->mod_section.registered.reg_type,
+			"reg_type      (Registered) Register Type");
+		for (i = 69; i <= 76; i++) {
+			printf("%-3d    : %02x rcw[%d]\n", i,
+				spd->mod_section.registered.rcw[i-69], i-69);
+		}
+		break;
+	default:
+		/* Module-specific Section, Unsupported Module Type */
+		printf("%-3d-%3d: ", 60, 116);
+
+		for (i = 60; i <= 116; i++)
+			printf("%02x", spd->mod_section.uc[i - 60]);
+
+		break;
+	}
+
+	/* Unique Module ID: Bytes 117-125 */
+	PRINT_NXS(117, spd->mmid_lsb, "Module MfgID Code LSB - JEP-106");
+	PRINT_NXS(118, spd->mmid_msb, "Module MfgID Code MSB - JEP-106");
+	PRINT_NXS(119, spd->mloc,     "Mfg Location");
+	PRINT_NNXXS(120, 121, spd->mdate[0], spd->mdate[1], "Mfg Date");
+
+	printf("%-3d-%3d: ", 122, 125);
+
+	for (i = 122; i <= 125; i++)
+		printf("%02x ", spd->sernum[i - 122]);
+	printf("   Module Serial Number\n");
+
+	/* CRC: Bytes 126-127 */
+	PRINT_NNXXS(126, 127, spd->crc[0], spd->crc[1], "  SPD CRC");
+
+	/* Other Manufacturer Fields and User Space: Bytes 128-255 */
+	printf("%-3d-%3d: ", 128, 145);
+	for (i = 128; i <= 145; i++)
+		printf("%02x ", spd->mpart[i - 128]);
+	printf("   Mfg's Module Part Number\n");
+
+	PRINT_NNXXS(146, 147, spd->mrev[0], spd->mrev[1],
+		"Module Revision code");
+
+	PRINT_NXS(148, spd->dmid_lsb, "DRAM MfgID Code LSB - JEP-106");
+	PRINT_NXS(149, spd->dmid_msb, "DRAM MfgID Code MSB - JEP-106");
+
+	printf("%-3d-%3d: ", 150, 175);
+	for (i = 150; i <= 175; i++)
+		printf("%02x ", spd->msd[i - 150]);
+	printf("   Mfg's Specific Data\n");
+
+	printf("%-3d-%3d: ", 176, 255);
+	for (i = 176; i <= 255; i++)
+		printf("%02x", spd->cust[i - 176]);
+	printf("   Mfg's Specific Data\n");
+
+}
+#endif
+
+static inline void generic_spd_dump(const generic_spd_eeprom_t *spd)
+{
+#if defined(CONFIG_SYS_FSL_DDR1)
+	ddr1_spd_dump(spd);
+#elif defined(CONFIG_SYS_FSL_DDR2)
+	ddr2_spd_dump(spd);
+#elif defined(CONFIG_SYS_FSL_DDR3)
+	ddr3_spd_dump(spd);
+#endif
+}
+
+static void fsl_ddr_printinfo(const fsl_ddr_info_t *pinfo,
+			unsigned int ctrl_mask,
+			unsigned int dimm_mask,
+			unsigned int do_mask)
+{
+	unsigned int i, j, retval;
+
+	/* STEP 1:  DIMM SPD data */
+	if (do_mask & STEP_GET_SPD) {
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			if (!(ctrl_mask & (1 << i)))
+				continue;
+
+			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+				if (!(dimm_mask & (1 << j)))
+					continue;
+
+				printf("SPD info:  Controller=%u "
+						"DIMM=%u\n", i, j);
+				generic_spd_dump(
+					&(pinfo->spd_installed_dimms[i][j]));
+				printf("\n");
+			}
+			printf("\n");
+		}
+		printf("\n");
+	}
+
+	/* STEP 2:  DIMM Parameters */
+	if (do_mask & STEP_COMPUTE_DIMM_PARMS) {
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			if (!(ctrl_mask & (1 << i)))
+				continue;
+			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+				if (!(dimm_mask & (1 << j)))
+					continue;
+				printf("DIMM parameters:  Controller=%u "
+						"DIMM=%u\n", i, j);
+				print_dimm_parameters(
+					&(pinfo->dimm_params[i][j]));
+				printf("\n");
+			}
+			printf("\n");
+		}
+		printf("\n");
+	}
+
+	/* STEP 3:  Common Parameters */
+	if (do_mask & STEP_COMPUTE_COMMON_PARMS) {
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			if (!(ctrl_mask & (1 << i)))
+				continue;
+			printf("\"lowest common\" DIMM parameters:  "
+					"Controller=%u\n", i);
+			print_lowest_common_dimm_parameters(
+				&pinfo->common_timing_params[i]);
+			printf("\n");
+		}
+		printf("\n");
+	}
+
+	/* STEP 4:  User Configuration Options */
+	if (do_mask & STEP_GATHER_OPTS) {
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			if (!(ctrl_mask & (1 << i)))
+				continue;
+			printf("User Config Options: Controller=%u\n", i);
+			print_memctl_options(&pinfo->memctl_opts[i]);
+			printf("\n");
+		}
+		printf("\n");
+	}
+
+	/* STEP 5:  Address assignment */
+	if (do_mask & STEP_ASSIGN_ADDRESSES) {
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			if (!(ctrl_mask & (1 << i)))
+				continue;
+			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+				printf("Address Assignment: Controller=%u "
+						"DIMM=%u\n", i, j);
+				printf("Don't have this functionality yet\n");
+			}
+			printf("\n");
+		}
+		printf("\n");
+	}
+
+	/* STEP 6:  computed controller register values */
+	if (do_mask & STEP_COMPUTE_REGS) {
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			if (!(ctrl_mask & (1 << i)))
+				continue;
+			printf("Computed Register Values: Controller=%u\n", i);
+			print_fsl_memctl_config_regs(
+				&pinfo->fsl_ddr_config_reg[i]);
+			retval = check_fsl_memctl_config_regs(
+				&pinfo->fsl_ddr_config_reg[i]);
+			if (retval) {
+				printf("check_fsl_memctl_config_regs "
+					"result = %u\n", retval);
+			}
+			printf("\n");
+		}
+		printf("\n");
+	}
+}
+
+struct data_strings {
+	const char *data_name;
+	unsigned int step_mask;
+	unsigned int dimm_number_required;
+};
+
+#define DATA_OPTIONS(name, step, dimm) {#name, step, dimm}
+
+static unsigned int fsl_ddr_parse_interactive_cmd(
+	char **argv,
+	int argc,
+	unsigned int *pstep_mask,
+	unsigned int *pctlr_mask,
+	unsigned int *pdimm_mask,
+	unsigned int *pdimm_number_required
+	 ) {
+
+	static const struct data_strings options[] = {
+		DATA_OPTIONS(spd, STEP_GET_SPD, 1),
+		DATA_OPTIONS(dimmparms, STEP_COMPUTE_DIMM_PARMS, 1),
+		DATA_OPTIONS(commonparms, STEP_COMPUTE_COMMON_PARMS, 0),
+		DATA_OPTIONS(opts, STEP_GATHER_OPTS, 0),
+		DATA_OPTIONS(addresses, STEP_ASSIGN_ADDRESSES, 0),
+		DATA_OPTIONS(regs, STEP_COMPUTE_REGS, 0),
+	};
+	static const unsigned int n_opts = ARRAY_SIZE(options);
+
+	unsigned int i, j;
+	unsigned int error = 0;
+
+	for (i = 1; i < argc; i++) {
+		unsigned int matched = 0;
+
+		for (j = 0; j < n_opts; j++) {
+			if (strcmp(options[j].data_name, argv[i]) != 0)
+				continue;
+			*pstep_mask |= options[j].step_mask;
+			*pdimm_number_required =
+				options[j].dimm_number_required;
+			matched = 1;
+			break;
+		}
+
+		if (matched)
+			continue;
+
+		if (argv[i][0] == 'c') {
+			char c = argv[i][1];
+			if (isdigit(c))
+				*pctlr_mask |= 1 << (c - '0');
+			continue;
+		}
+
+		if (argv[i][0] == 'd') {
+			char c = argv[i][1];
+			if (isdigit(c))
+				*pdimm_mask |= 1 << (c - '0');
+			continue;
+		}
+
+		printf("unknown arg %s\n", argv[i]);
+		*pstep_mask = 0;
+		error = 1;
+		break;
+	}
+
+	return error;
+}
+
+int fsl_ddr_interactive_env_var_exists(void)
+{
+	char buffer[CONFIG_SYS_CBSIZE];
+
+	if (getenv_f("ddr_interactive", buffer, CONFIG_SYS_CBSIZE) >= 0)
+		return 1;
+
+	return 0;
+}
+
+unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set)
+{
+	unsigned long long ddrsize;
+	const char *prompt = "FSL DDR>";
+	char buffer[CONFIG_SYS_CBSIZE];
+	char buffer2[CONFIG_SYS_CBSIZE];
+	char *p = NULL;
+	char *argv[CONFIG_SYS_MAXARGS + 1];	/* NULL terminated */
+	int argc;
+	unsigned int next_step = STEP_GET_SPD;
+	const char *usage = {
+		"commands:\n"
+		"print      print SPD and intermediate computed data\n"
+		"reset      reboot machine\n"
+		"recompute  reload SPD and options to default and recompute regs\n"
+		"edit       modify spd, parameter, or option\n"
+		"compute    recompute registers from current next_step to end\n"
+		"copy       copy parameters\n"
+		"next_step  shows current next_step\n"
+		"help       this message\n"
+		"go         program the memory controller and continue with u-boot\n"
+	};
+
+	if (var_is_set) {
+		if (getenv_f("ddr_interactive", buffer2, CONFIG_SYS_CBSIZE) > 0) {
+			p = buffer2;
+		} else {
+			var_is_set = 0;
+		}
+	}
+
+	/*
+	 * The strategy for next_step is that it points to the next
+	 * step in the computation process that needs to be done.
+	 */
+	while (1) {
+		if (var_is_set) {
+			char *pend = strchr(p, ';');
+			if (pend) {
+				/* found command separator, copy sub-command */
+				*pend = '\0';
+				strcpy(buffer, p);
+				p = pend + 1;
+			} else {
+				/* separator not found, copy whole string */
+				strcpy(buffer, p);
+				p = NULL;
+				var_is_set = 0;
+			}
+		} else {
+			/*
+			 * No need to worry for buffer overflow here in
+			 * this function;  readline() maxes out at CFG_CBSIZE
+			 */
+			readline_into_buffer(prompt, buffer, 0);
+		}
+		argc = parse_line(buffer, argv);
+		if (argc == 0)
+			continue;
+
+
+		if (strcmp(argv[0], "help") == 0) {
+			puts(usage);
+			continue;
+		}
+
+		if (strcmp(argv[0], "next_step") == 0) {
+			printf("next_step = 0x%02X (%s)\n",
+			       next_step,
+			       step_to_string(next_step));
+			continue;
+		}
+
+		if (strcmp(argv[0], "copy") == 0) {
+			unsigned int error = 0;
+			unsigned int step_mask = 0;
+			unsigned int src_ctlr_mask = 0;
+			unsigned int src_dimm_mask = 0;
+			unsigned int dimm_number_required = 0;
+			unsigned int src_ctlr_num = 0;
+			unsigned int src_dimm_num = 0;
+			unsigned int dst_ctlr_num = -1;
+			unsigned int dst_dimm_num = -1;
+			unsigned int i, num_dest_parms;
+
+			if (argc == 1) {
+				printf("copy <src c#> <src d#> <spd|dimmparms|commonparms|opts|addresses|regs> <dst c#> <dst d#>\n");
+				continue;
+			}
+
+			error = fsl_ddr_parse_interactive_cmd(
+				argv, argc,
+				&step_mask,
+				&src_ctlr_mask,
+				&src_dimm_mask,
+				&dimm_number_required
+			);
+
+			/* XXX: only dimm_number_required and step_mask will
+			   be used by this function.  Parse the controller and
+			   DIMM number separately because it is easier.  */
+
+			if (error)
+				continue;
+
+			/* parse source destination controller / DIMM */
+
+			num_dest_parms = dimm_number_required ? 2 : 1;
+
+			for (i = 0; i < argc; i++) {
+				if (argv[i][0] == 'c') {
+					char c = argv[i][1];
+					if (isdigit(c)) {
+						src_ctlr_num = (c - '0');
+						break;
+					}
+				}
+			}
+
+			for (i = 0; i < argc; i++) {
+				if (argv[i][0] == 'd') {
+					char c = argv[i][1];
+					if (isdigit(c)) {
+						src_dimm_num = (c - '0');
+						break;
+					}
+				}
+			}
+
+			/* parse destination controller / DIMM */
+
+			for (i = argc - 1; i >= argc - num_dest_parms; i--) {
+				if (argv[i][0] == 'c') {
+					char c = argv[i][1];
+					if (isdigit(c)) {
+						dst_ctlr_num = (c - '0');
+						break;
+					}
+				}
+			}
+
+			for (i = argc - 1; i >= argc - num_dest_parms; i--) {
+				if (argv[i][0] == 'd') {
+					char c = argv[i][1];
+					if (isdigit(c)) {
+						dst_dimm_num = (c - '0');
+						break;
+					}
+				}
+			}
+
+			/* TODO: validate inputs */
+
+			debug("src_ctlr_num = %u, src_dimm_num = %u, dst_ctlr_num = %u, dst_dimm_num = %u, step_mask = %x\n",
+				src_ctlr_num, src_dimm_num, dst_ctlr_num, dst_dimm_num, step_mask);
+
+
+			switch (step_mask) {
+
+			case STEP_GET_SPD:
+				memcpy(&(pinfo->spd_installed_dimms[dst_ctlr_num][dst_dimm_num]),
+					&(pinfo->spd_installed_dimms[src_ctlr_num][src_dimm_num]),
+					sizeof(pinfo->spd_installed_dimms[0][0]));
+				break;
+
+			case STEP_COMPUTE_DIMM_PARMS:
+				memcpy(&(pinfo->dimm_params[dst_ctlr_num][dst_dimm_num]),
+					&(pinfo->dimm_params[src_ctlr_num][src_dimm_num]),
+					sizeof(pinfo->dimm_params[0][0]));
+				break;
+
+			case STEP_COMPUTE_COMMON_PARMS:
+				memcpy(&(pinfo->common_timing_params[dst_ctlr_num]),
+					&(pinfo->common_timing_params[src_ctlr_num]),
+					sizeof(pinfo->common_timing_params[0]));
+				break;
+
+			case STEP_GATHER_OPTS:
+				memcpy(&(pinfo->memctl_opts[dst_ctlr_num]),
+					&(pinfo->memctl_opts[src_ctlr_num]),
+					sizeof(pinfo->memctl_opts[0]));
+				break;
+
+			/* someday be able to have addresses to copy addresses... */
+
+			case STEP_COMPUTE_REGS:
+				memcpy(&(pinfo->fsl_ddr_config_reg[dst_ctlr_num]),
+					&(pinfo->fsl_ddr_config_reg[src_ctlr_num]),
+					sizeof(pinfo->memctl_opts[0]));
+				break;
+
+			default:
+				printf("unexpected step_mask value\n");
+			}
+
+			continue;
+
+		}
+
+		if (strcmp(argv[0], "edit") == 0) {
+			unsigned int error = 0;
+			unsigned int step_mask = 0;
+			unsigned int ctlr_mask = 0;
+			unsigned int dimm_mask = 0;
+			char *p_element = NULL;
+			char *p_value = NULL;
+			unsigned int dimm_number_required = 0;
+			unsigned int ctrl_num;
+			unsigned int dimm_num;
+
+			if (argc == 1) {
+				/* Only the element and value must be last */
+				printf("edit <c#> <d#> "
+					"<spd|dimmparms|commonparms|opts|"
+					"addresses|regs> <element> <value>\n");
+				printf("for spd, specify byte number for "
+					"element\n");
+				continue;
+			}
+
+			error = fsl_ddr_parse_interactive_cmd(
+				argv, argc - 2,
+				&step_mask,
+				&ctlr_mask,
+				&dimm_mask,
+				&dimm_number_required
+			);
+
+			if (error)
+				continue;
+
+
+			/* Check arguments */
+
+			/* ERROR: If no steps were found */
+			if (step_mask == 0) {
+				printf("Error: No valid steps were specified "
+						"in argument.\n");
+				continue;
+			}
+
+			/* ERROR: If multiple steps were found */
+			if (step_mask & (step_mask - 1)) {
+				printf("Error: Multiple steps specified in "
+						"argument.\n");
+				continue;
+			}
+
+			/* ERROR: Controller not specified */
+			if (ctlr_mask == 0) {
+				printf("Error: controller number not "
+					"specified or no element and "
+					"value specified\n");
+				continue;
+			}
+
+			if (ctlr_mask & (ctlr_mask - 1)) {
+				printf("Error: multiple controllers "
+						"specified, %X\n", ctlr_mask);
+				continue;
+			}
+
+			/* ERROR: DIMM number not specified */
+			if (dimm_number_required && dimm_mask == 0) {
+				printf("Error: DIMM number number not "
+					"specified or no element and "
+					"value specified\n");
+				continue;
+			}
+
+			if (dimm_mask & (dimm_mask - 1)) {
+				printf("Error: multipled DIMMs specified\n");
+				continue;
+			}
+
+			p_element = argv[argc - 2];
+			p_value = argv[argc - 1];
+
+			ctrl_num = __ilog2(ctlr_mask);
+			dimm_num = __ilog2(dimm_mask);
+
+			switch (step_mask) {
+			case STEP_GET_SPD:
+				{
+					unsigned int element_num;
+					unsigned int value;
+
+					element_num = simple_strtoul(p_element,
+								     NULL, 0);
+					value = simple_strtoul(p_value,
+							       NULL, 0);
+					fsl_ddr_spd_edit(pinfo,
+							       ctrl_num,
+							       dimm_num,
+							       element_num,
+							       value);
+					next_step = STEP_COMPUTE_DIMM_PARMS;
+				}
+				break;
+
+			case STEP_COMPUTE_DIMM_PARMS:
+				fsl_ddr_dimm_parameters_edit(
+						 pinfo, ctrl_num, dimm_num,
+						 p_element, p_value);
+				next_step = STEP_COMPUTE_COMMON_PARMS;
+				break;
+
+			case STEP_COMPUTE_COMMON_PARMS:
+				lowest_common_dimm_parameters_edit(pinfo,
+						ctrl_num, p_element, p_value);
+				next_step = STEP_GATHER_OPTS;
+				break;
+
+			case STEP_GATHER_OPTS:
+				fsl_ddr_options_edit(pinfo, ctrl_num,
+							   p_element, p_value);
+				next_step = STEP_ASSIGN_ADDRESSES;
+				break;
+
+			case STEP_ASSIGN_ADDRESSES:
+				printf("editing of address assignment "
+						"not yet implemented\n");
+				break;
+
+			case STEP_COMPUTE_REGS:
+				{
+					fsl_ddr_regs_edit(pinfo,
+								ctrl_num,
+								p_element,
+								p_value);
+					next_step = STEP_PROGRAM_REGS;
+				}
+				break;
+
+			default:
+				printf("programming error\n");
+				while (1)
+					;
+				break;
+			}
+			continue;
+		}
+
+		if (strcmp(argv[0], "reset") == 0) {
+			/*
+			 * Reboot machine.
+			 * Args don't seem to matter because this
+			 * doesn't return
+			 */
+			do_reset(NULL, 0, 0, NULL);
+			printf("Reset didn't work\n");
+		}
+
+		if (strcmp(argv[0], "recompute") == 0) {
+			/*
+			 * Recalculate everything, starting with
+			 * loading SPD EEPROM from DIMMs
+			 */
+			next_step = STEP_GET_SPD;
+			ddrsize = fsl_ddr_compute(pinfo, next_step, 0);
+			continue;
+		}
+
+		if (strcmp(argv[0], "compute") == 0) {
+			/*
+			 * Compute rest of steps starting at
+			 * the current next_step/
+			 */
+			ddrsize = fsl_ddr_compute(pinfo, next_step, 0);
+			continue;
+		}
+
+		if (strcmp(argv[0], "print") == 0) {
+			unsigned int error = 0;
+			unsigned int step_mask = 0;
+			unsigned int ctlr_mask = 0;
+			unsigned int dimm_mask = 0;
+			unsigned int dimm_number_required = 0;
+
+			if (argc == 1) {
+				printf("print [c<n>] [d<n>] [spd] [dimmparms] "
+				  "[commonparms] [opts] [addresses] [regs]\n");
+				continue;
+			}
+
+			error = fsl_ddr_parse_interactive_cmd(
+				argv, argc,
+				&step_mask,
+				&ctlr_mask,
+				&dimm_mask,
+				&dimm_number_required
+			);
+
+			if (error)
+				continue;
+
+			/* If no particular controller was found, print all */
+			if (ctlr_mask == 0)
+				ctlr_mask = 0xFF;
+
+			/* If no particular dimm was found, print all dimms. */
+			if (dimm_mask == 0)
+				dimm_mask = 0xFF;
+
+			/* If no steps were found, print all steps. */
+			if (step_mask == 0)
+				step_mask = STEP_ALL;
+
+			fsl_ddr_printinfo(pinfo, ctlr_mask,
+						dimm_mask, step_mask);
+			continue;
+		}
+
+		if (strcmp(argv[0], "go") == 0) {
+			if (next_step)
+				ddrsize = fsl_ddr_compute(pinfo, next_step, 0);
+			break;
+		}
+
+		printf("unknown command %s\n", argv[0]);
+	}
+
+	debug("end of memory = %llu\n", (u64)ddrsize);
+
+	return ddrsize;
+}
diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c
new file mode 100644
index 0000000..610318a
--- /dev/null
+++ b/drivers/ddr/fsl/lc_common_dimm_params.c
@@ -0,0 +1,526 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+
+#include <fsl_ddr.h>
+
+#if defined(CONFIG_SYS_FSL_DDR3)
+static unsigned int
+compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
+			 common_timing_params_t *outpdimm,
+			 unsigned int number_of_dimms)
+{
+	unsigned int i;
+	unsigned int taamin_ps = 0;
+	unsigned int tckmin_x_ps = 0;
+	unsigned int common_caslat;
+	unsigned int caslat_actual;
+	unsigned int retry = 16;
+	unsigned int tmp;
+	const unsigned int mclk_ps = get_memory_clk_period_ps();
+
+	/* compute the common CAS latency supported between slots */
+	tmp = dimm_params[0].caslat_x;
+	for (i = 1; i < number_of_dimms; i++) {
+		if (dimm_params[i].n_ranks)
+			tmp &= dimm_params[i].caslat_x;
+	}
+	common_caslat = tmp;
+
+	/* compute the max tAAmin tCKmin between slots */
+	for (i = 0; i < number_of_dimms; i++) {
+		taamin_ps = max(taamin_ps, dimm_params[i].taa_ps);
+		tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
+	}
+	/* validate if the memory clk is in the range of dimms */
+	if (mclk_ps < tckmin_x_ps) {
+		printf("DDR clock (MCLK cycle %u ps) is faster than "
+			"the slowest DIMM(s) (tCKmin %u ps) can support.\n",
+			mclk_ps, tckmin_x_ps);
+	}
+	/* determine the acutal cas latency */
+	caslat_actual = (taamin_ps + mclk_ps - 1) / mclk_ps;
+	/* check if the dimms support the CAS latency */
+	while (!(common_caslat & (1 << caslat_actual)) && retry > 0) {
+		caslat_actual++;
+		retry--;
+	}
+	/* once the caculation of caslat_actual is completed
+	 * we must verify that this CAS latency value does not
+	 * exceed tAAmax, which is 20 ns for all DDR3 speed grades
+	 */
+	if (caslat_actual * mclk_ps > 20000) {
+		printf("The choosen cas latency %d is too large\n",
+			caslat_actual);
+	}
+	outpdimm->lowest_common_SPD_caslat = caslat_actual;
+
+	return 0;
+}
+#endif
+
+/*
+ * compute_lowest_common_dimm_parameters()
+ *
+ * Determine the worst-case DIMM timing parameters from the set of DIMMs
+ * whose parameters have been computed into the array pointed to
+ * by dimm_params.
+ */
+unsigned int
+compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
+				      common_timing_params_t *outpdimm,
+				      const unsigned int number_of_dimms)
+{
+	unsigned int i, j;
+
+	unsigned int tckmin_x_ps = 0;
+	unsigned int tckmax_ps = 0xFFFFFFFF;
+	unsigned int tckmax_max_ps = 0;
+	unsigned int trcd_ps = 0;
+	unsigned int trp_ps = 0;
+	unsigned int tras_ps = 0;
+	unsigned int twr_ps = 0;
+	unsigned int twtr_ps = 0;
+	unsigned int trfc_ps = 0;
+	unsigned int trrd_ps = 0;
+	unsigned int trc_ps = 0;
+	unsigned int refresh_rate_ps = 0;
+	unsigned int extended_op_srt = 1;
+	unsigned int tis_ps = 0;
+	unsigned int tih_ps = 0;
+	unsigned int tds_ps = 0;
+	unsigned int tdh_ps = 0;
+	unsigned int trtp_ps = 0;
+	unsigned int tdqsq_max_ps = 0;
+	unsigned int tqhs_ps = 0;
+
+	unsigned int temp1, temp2;
+	unsigned int additive_latency = 0;
+#if !defined(CONFIG_SYS_FSL_DDR3)
+	const unsigned int mclk_ps = get_memory_clk_period_ps();
+	unsigned int lowest_good_caslat;
+	unsigned int not_ok;
+
+	debug("using mclk_ps = %u\n", mclk_ps);
+#endif
+
+	temp1 = 0;
+	for (i = 0; i < number_of_dimms; i++) {
+		/*
+		 * If there are no ranks on this DIMM,
+		 * it probably doesn't exist, so skip it.
+		 */
+		if (dimm_params[i].n_ranks == 0) {
+			temp1++;
+			continue;
+		}
+		if (dimm_params[i].n_ranks == 4 && i != 0) {
+			printf("Found Quad-rank DIMM in wrong bank, ignored."
+				" Software may not run as expected.\n");
+			temp1++;
+			continue;
+		}
+
+		/*
+		 * check if quad-rank DIMM is plugged if
+		 * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined
+		 * Only the board with proper design is capable
+		 */
+#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+		if (dimm_params[i].n_ranks == 4 && \
+		  CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
+			printf("Found Quad-rank DIMM, not able to support.");
+			temp1++;
+			continue;
+		}
+#endif
+		/*
+		 * Find minimum tckmax_ps to find fastest slow speed,
+		 * i.e., this is the slowest the whole system can go.
+		 */
+		tckmax_ps = min(tckmax_ps, dimm_params[i].tckmax_ps);
+
+		/* Either find maximum value to determine slowest
+		 * speed, delay, time, period, etc */
+		tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
+		tckmax_max_ps = max(tckmax_max_ps, dimm_params[i].tckmax_ps);
+		trcd_ps = max(trcd_ps, dimm_params[i].trcd_ps);
+		trp_ps = max(trp_ps, dimm_params[i].trp_ps);
+		tras_ps = max(tras_ps, dimm_params[i].tras_ps);
+		twr_ps = max(twr_ps, dimm_params[i].twr_ps);
+		twtr_ps = max(twtr_ps, dimm_params[i].twtr_ps);
+		trfc_ps = max(trfc_ps, dimm_params[i].trfc_ps);
+		trrd_ps = max(trrd_ps, dimm_params[i].trrd_ps);
+		trc_ps = max(trc_ps, dimm_params[i].trc_ps);
+		tis_ps = max(tis_ps, dimm_params[i].tis_ps);
+		tih_ps = max(tih_ps, dimm_params[i].tih_ps);
+		tds_ps = max(tds_ps, dimm_params[i].tds_ps);
+		tdh_ps = max(tdh_ps, dimm_params[i].tdh_ps);
+		trtp_ps = max(trtp_ps, dimm_params[i].trtp_ps);
+		tqhs_ps = max(tqhs_ps, dimm_params[i].tqhs_ps);
+		refresh_rate_ps = max(refresh_rate_ps,
+				      dimm_params[i].refresh_rate_ps);
+		/* extended_op_srt is either 0 or 1, 0 having priority */
+		extended_op_srt = min(extended_op_srt,
+				      dimm_params[i].extended_op_srt);
+
+		/*
+		 * Find maximum tdqsq_max_ps to find slowest.
+		 *
+		 * FIXME: is finding the slowest value the correct
+		 * strategy for this parameter?
+		 */
+		tdqsq_max_ps = max(tdqsq_max_ps, dimm_params[i].tdqsq_max_ps);
+	}
+
+	outpdimm->ndimms_present = number_of_dimms - temp1;
+
+	if (temp1 == number_of_dimms) {
+		debug("no dimms this memory controller\n");
+		return 0;
+	}
+
+	outpdimm->tckmin_x_ps = tckmin_x_ps;
+	outpdimm->tckmax_ps = tckmax_ps;
+	outpdimm->tckmax_max_ps = tckmax_max_ps;
+	outpdimm->trcd_ps = trcd_ps;
+	outpdimm->trp_ps = trp_ps;
+	outpdimm->tras_ps = tras_ps;
+	outpdimm->twr_ps = twr_ps;
+	outpdimm->twtr_ps = twtr_ps;
+	outpdimm->trfc_ps = trfc_ps;
+	outpdimm->trrd_ps = trrd_ps;
+	outpdimm->trc_ps = trc_ps;
+	outpdimm->refresh_rate_ps = refresh_rate_ps;
+	outpdimm->extended_op_srt = extended_op_srt;
+	outpdimm->tis_ps = tis_ps;
+	outpdimm->tih_ps = tih_ps;
+	outpdimm->tds_ps = tds_ps;
+	outpdimm->tdh_ps = tdh_ps;
+	outpdimm->trtp_ps = trtp_ps;
+	outpdimm->tdqsq_max_ps = tdqsq_max_ps;
+	outpdimm->tqhs_ps = tqhs_ps;
+
+	/* Determine common burst length for all DIMMs. */
+	temp1 = 0xff;
+	for (i = 0; i < number_of_dimms; i++) {
+		if (dimm_params[i].n_ranks) {
+			temp1 &= dimm_params[i].burst_lengths_bitmask;
+		}
+	}
+	outpdimm->all_dimms_burst_lengths_bitmask = temp1;
+
+	/* Determine if all DIMMs registered buffered. */
+	temp1 = temp2 = 0;
+	for (i = 0; i < number_of_dimms; i++) {
+		if (dimm_params[i].n_ranks) {
+			if (dimm_params[i].registered_dimm) {
+				temp1 = 1;
+#ifndef CONFIG_SPL_BUILD
+				printf("Detected RDIMM %s\n",
+					dimm_params[i].mpart);
+#endif
+			} else {
+				temp2 = 1;
+#ifndef CONFIG_SPL_BUILD
+				printf("Detected UDIMM %s\n",
+					dimm_params[i].mpart);
+#endif
+			}
+		}
+	}
+
+	outpdimm->all_dimms_registered = 0;
+	outpdimm->all_dimms_unbuffered = 0;
+	if (temp1 && !temp2) {
+		outpdimm->all_dimms_registered = 1;
+	} else if (!temp1 && temp2) {
+		outpdimm->all_dimms_unbuffered = 1;
+	} else {
+		printf("ERROR:  Mix of registered buffered and unbuffered "
+				"DIMMs detected!\n");
+	}
+
+	temp1 = 0;
+	if (outpdimm->all_dimms_registered)
+		for (j = 0; j < 16; j++) {
+			outpdimm->rcw[j] = dimm_params[0].rcw[j];
+			for (i = 1; i < number_of_dimms; i++) {
+				if (!dimm_params[i].n_ranks)
+					continue;
+				if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) {
+					temp1 = 1;
+					break;
+				}
+			}
+		}
+
+	if (temp1 != 0)
+		printf("ERROR: Mix different RDIMM detected!\n");
+
+#if defined(CONFIG_SYS_FSL_DDR3)
+	if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms))
+		return 1;
+#else
+	/*
+	 * Compute a CAS latency suitable for all DIMMs
+	 *
+	 * Strategy for SPD-defined latencies: compute only
+	 * CAS latency defined by all DIMMs.
+	 */
+
+	/*
+	 * Step 1: find CAS latency common to all DIMMs using bitwise
+	 * operation.
+	 */
+	temp1 = 0xFF;
+	for (i = 0; i < number_of_dimms; i++) {
+		if (dimm_params[i].n_ranks) {
+			temp2 = 0;
+			temp2 |= 1 << dimm_params[i].caslat_x;
+			temp2 |= 1 << dimm_params[i].caslat_x_minus_1;
+			temp2 |= 1 << dimm_params[i].caslat_x_minus_2;
+			/*
+			 * FIXME: If there was no entry for X-2 (X-1) in
+			 * the SPD, then caslat_x_minus_2
+			 * (caslat_x_minus_1) contains either 255 or
+			 * 0xFFFFFFFF because that's what the glorious
+			 * __ilog2 function returns for an input of 0.
+			 * On 32-bit PowerPC, left shift counts with bit
+			 * 26 set (that the value of 255 or 0xFFFFFFFF
+			 * will have), cause the destination register to
+			 * be 0.  That is why this works.
+			 */
+			temp1 &= temp2;
+		}
+	}
+
+	/*
+	 * Step 2: check each common CAS latency against tCK of each
+	 * DIMM's SPD.
+	 */
+	lowest_good_caslat = 0;
+	temp2 = 0;
+	while (temp1) {
+		not_ok = 0;
+		temp2 =  __ilog2(temp1);
+		debug("checking common caslat = %u\n", temp2);
+
+		/* Check if this CAS latency will work on all DIMMs at tCK. */
+		for (i = 0; i < number_of_dimms; i++) {
+			if (!dimm_params[i].n_ranks) {
+				continue;
+			}
+			if (dimm_params[i].caslat_x == temp2) {
+				if (mclk_ps >= dimm_params[i].tckmin_x_ps) {
+					debug("CL = %u ok on DIMM %u at tCK=%u"
+					    " ps with its tCKmin_X_ps of %u\n",
+					       temp2, i, mclk_ps,
+					       dimm_params[i].tckmin_x_ps);
+					continue;
+				} else {
+					not_ok++;
+				}
+			}
+
+			if (dimm_params[i].caslat_x_minus_1 == temp2) {
+				unsigned int tckmin_x_minus_1_ps
+					= dimm_params[i].tckmin_x_minus_1_ps;
+				if (mclk_ps >= tckmin_x_minus_1_ps) {
+					debug("CL = %u ok on DIMM %u at "
+						"tCK=%u ps with its "
+						"tckmin_x_minus_1_ps of %u\n",
+					       temp2, i, mclk_ps,
+					       tckmin_x_minus_1_ps);
+					continue;
+				} else {
+					not_ok++;
+				}
+			}
+
+			if (dimm_params[i].caslat_x_minus_2 == temp2) {
+				unsigned int tckmin_x_minus_2_ps
+					= dimm_params[i].tckmin_x_minus_2_ps;
+				if (mclk_ps >= tckmin_x_minus_2_ps) {
+					debug("CL = %u ok on DIMM %u at "
+						"tCK=%u ps with its "
+						"tckmin_x_minus_2_ps of %u\n",
+					       temp2, i, mclk_ps,
+					       tckmin_x_minus_2_ps);
+					continue;
+				} else {
+					not_ok++;
+				}
+			}
+		}
+
+		if (!not_ok) {
+			lowest_good_caslat = temp2;
+		}
+
+		temp1 &= ~(1 << temp2);
+	}
+
+	debug("lowest common SPD-defined CAS latency = %u\n",
+	       lowest_good_caslat);
+	outpdimm->lowest_common_SPD_caslat = lowest_good_caslat;
+
+
+	/*
+	 * Compute a common 'de-rated' CAS latency.
+	 *
+	 * The strategy here is to find the *highest* dereated cas latency
+	 * with the assumption that all of the DIMMs will support a dereated
+	 * CAS latency higher than or equal to their lowest dereated value.
+	 */
+	temp1 = 0;
+	for (i = 0; i < number_of_dimms; i++) {
+		temp1 = max(temp1, dimm_params[i].caslat_lowest_derated);
+	}
+	outpdimm->highest_common_derated_caslat = temp1;
+	debug("highest common dereated CAS latency = %u\n", temp1);
+#endif /* #if defined(CONFIG_SYS_FSL_DDR3) */
+
+	/* Determine if all DIMMs ECC capable. */
+	temp1 = 1;
+	for (i = 0; i < number_of_dimms; i++) {
+		if (dimm_params[i].n_ranks &&
+			!(dimm_params[i].edc_config & EDC_ECC)) {
+			temp1 = 0;
+			break;
+		}
+	}
+	if (temp1) {
+		debug("all DIMMs ECC capable\n");
+	} else {
+		debug("Warning: not all DIMMs ECC capable, cant enable ECC\n");
+	}
+	outpdimm->all_dimms_ecc_capable = temp1;
+
+#ifndef CONFIG_SYS_FSL_DDR3
+	/* FIXME: move to somewhere else to validate. */
+	if (mclk_ps > tckmax_max_ps) {
+		printf("Warning: some of the installed DIMMs "
+				"can not operate this slowly.\n");
+		return 1;
+	}
+#endif
+	/*
+	 * Compute additive latency.
+	 *
+	 * For DDR1, additive latency should be 0.
+	 *
+	 * For DDR2, with ODT enabled, use "a value" less than ACTTORW,
+	 *	which comes from Trcd, and also note that:
+	 *	    add_lat + caslat must be >= 4
+	 *
+	 * For DDR3, we use the AL=0
+	 *
+	 * When to use additive latency for DDR2:
+	 *
+	 * I. Because you are using CL=3 and need to do ODT on writes and
+	 *    want functionality.
+	 *    1. Are you going to use ODT? (Does your board not have
+	 *      additional termination circuitry for DQ, DQS, DQS_,
+	 *      DM, RDQS, RDQS_ for x4/x8 configs?)
+	 *    2. If so, is your lowest supported CL going to be 3?
+	 *    3. If so, then you must set AL=1 because
+	 *
+	 *       WL >= 3 for ODT on writes
+	 *       RL = AL + CL
+	 *       WL = RL - 1
+	 *       ->
+	 *       WL = AL + CL - 1
+	 *       AL + CL - 1 >= 3
+	 *       AL + CL >= 4
+	 *  QED
+	 *
+	 *  RL >= 3 for ODT on reads
+	 *  RL = AL + CL
+	 *
+	 *  Since CL aren't usually less than 2, AL=0 is a minimum,
+	 *  so the WL-derived AL should be the  -- FIXME?
+	 *
+	 * II. Because you are using auto-precharge globally and want to
+	 *     use additive latency (posted CAS) to get more bandwidth.
+	 *     1. Are you going to use auto-precharge mode globally?
+	 *
+	 *        Use addtivie latency and compute AL to be 1 cycle less than
+	 *        tRCD, i.e. the READ or WRITE command is in the cycle
+	 *        immediately following the ACTIVATE command..
+	 *
+	 * III. Because you feel like it or want to do some sort of
+	 *      degraded-performance experiment.
+	 *     1.  Do you just want to use additive latency because you feel
+	 *         like it?
+	 *
+	 * Validation:  AL is less than tRCD, and within the other
+	 * read-to-precharge constraints.
+	 */
+
+	additive_latency = 0;
+
+#if defined(CONFIG_SYS_FSL_DDR2)
+	if (lowest_good_caslat < 4) {
+		additive_latency = (picos_to_mclk(trcd_ps) > lowest_good_caslat)
+			? picos_to_mclk(trcd_ps) - lowest_good_caslat : 0;
+		if (mclk_to_picos(additive_latency) > trcd_ps) {
+			additive_latency = picos_to_mclk(trcd_ps);
+			debug("setting additive_latency to %u because it was "
+				" greater than tRCD_ps\n", additive_latency);
+		}
+	}
+
+#elif defined(CONFIG_SYS_FSL_DDR3)
+	/*
+	 * The system will not use the global auto-precharge mode.
+	 * However, it uses the page mode, so we set AL=0
+	 */
+	additive_latency = 0;
+#endif
+
+	/*
+	 * Validate additive latency
+	 * FIXME: move to somewhere else to validate
+	 *
+	 * AL <= tRCD(min)
+	 */
+	if (mclk_to_picos(additive_latency) > trcd_ps) {
+		printf("Error: invalid additive latency exceeds tRCD(min).\n");
+		return 1;
+	}
+
+	/*
+	 * RL = CL + AL;  RL >= 3 for ODT_RD_CFG to be enabled
+	 * WL = RL - 1;  WL >= 3 for ODT_WL_CFG to be enabled
+	 * ADD_LAT (the register) must be set to a value less
+	 * than ACTTORW if WL = 1, then AL must be set to 1
+	 * RD_TO_PRE (the register) must be set to a minimum
+	 * tRTP + AL if AL is nonzero
+	 */
+
+	/*
+	 * Additive latency will be applied only if the memctl option to
+	 * use it.
+	 */
+	outpdimm->additive_latency = additive_latency;
+
+	debug("tCKmin_ps = %u\n", outpdimm->tckmin_x_ps);
+	debug("trcd_ps   = %u\n", outpdimm->trcd_ps);
+	debug("trp_ps    = %u\n", outpdimm->trp_ps);
+	debug("tras_ps   = %u\n", outpdimm->tras_ps);
+	debug("twr_ps    = %u\n", outpdimm->twr_ps);
+	debug("twtr_ps   = %u\n", outpdimm->twtr_ps);
+	debug("trfc_ps   = %u\n", outpdimm->trfc_ps);
+	debug("trrd_ps   = %u\n", outpdimm->trrd_ps);
+	debug("trc_ps    = %u\n", outpdimm->trc_ps);
+
+	return 0;
+}
diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c
new file mode 100644
index 0000000..d0cd589
--- /dev/null
+++ b/drivers/ddr/fsl/main.c
@@ -0,0 +1,724 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+/*
+ * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
+ * Based on code from spd_sdram.c
+ * Author: James Yang [at freescale.com]
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr.h>
+
+#ifdef CONFIG_PPC
+#include <asm/fsl_law.h>
+
+void fsl_ddr_set_lawbar(
+		const common_timing_params_t *memctl_common_params,
+		unsigned int memctl_interleaved,
+		unsigned int ctrl_num);
+#endif
+
+void fsl_ddr_set_intl3r(const unsigned int granule_size);
+#if defined(SPD_EEPROM_ADDRESS) || \
+    defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \
+    defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4)
+#if (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS,
+};
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS1,	/* controller 1 */
+	[0][1] = SPD_EEPROM_ADDRESS2,	/* controller 1 */
+};
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS1,	/* controller 1 */
+	[1][0] = SPD_EEPROM_ADDRESS2,	/* controller 2 */
+};
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS1,	/* controller 1 */
+	[0][1] = SPD_EEPROM_ADDRESS2,	/* controller 1 */
+	[1][0] = SPD_EEPROM_ADDRESS3,	/* controller 2 */
+	[1][1] = SPD_EEPROM_ADDRESS4,	/* controller 2 */
+};
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS1,	/* controller 1 */
+	[1][0] = SPD_EEPROM_ADDRESS2,	/* controller 2 */
+	[2][0] = SPD_EEPROM_ADDRESS3,	/* controller 3 */
+};
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS1,	/* controller 1 */
+	[0][1] = SPD_EEPROM_ADDRESS2,	/* controller 1 */
+	[1][0] = SPD_EEPROM_ADDRESS3,	/* controller 2 */
+	[1][1] = SPD_EEPROM_ADDRESS4,	/* controller 2 */
+	[2][0] = SPD_EEPROM_ADDRESS5,	/* controller 3 */
+	[2][1] = SPD_EEPROM_ADDRESS6,	/* controller 3 */
+};
+
+#endif
+
+static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
+{
+	int ret;
+
+	i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
+
+	ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
+				sizeof(generic_spd_eeprom_t));
+
+	if (ret) {
+		if (i2c_address ==
+#ifdef SPD_EEPROM_ADDRESS
+				SPD_EEPROM_ADDRESS
+#elif defined(SPD_EEPROM_ADDRESS1)
+				SPD_EEPROM_ADDRESS1
+#endif
+				) {
+			printf("DDR: failed to read SPD from address %u\n",
+				i2c_address);
+		} else {
+			debug("DDR: failed to read SPD from address %u\n",
+				i2c_address);
+		}
+		memset(spd, 0, sizeof(generic_spd_eeprom_t));
+	}
+}
+
+__attribute__((weak, alias("__get_spd")))
+void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address);
+
+void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
+		      unsigned int ctrl_num)
+{
+	unsigned int i;
+	unsigned int i2c_address = 0;
+
+	if (ctrl_num >= CONFIG_NUM_DDR_CONTROLLERS) {
+		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+		return;
+	}
+
+	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+		i2c_address = spd_i2c_addr[ctrl_num][i];
+		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
+	}
+}
+#else
+void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
+		      unsigned int ctrl_num)
+{
+}
+#endif /* SPD_EEPROM_ADDRESSx */
+
+/*
+ * ASSUMPTIONS:
+ *    - Same number of CONFIG_DIMM_SLOTS_PER_CTLR on each controller
+ *    - Same memory data bus width on all controllers
+ *
+ * NOTES:
+ *
+ * The memory controller and associated documentation use confusing
+ * terminology when referring to the orgranization of DRAM.
+ *
+ * Here is a terminology translation table:
+ *
+ * memory controller/documention  |industry   |this code  |signals
+ * -------------------------------|-----------|-----------|-----------------
+ * physical bank/bank		  |rank       |rank	  |chip select (CS)
+ * logical bank/sub-bank	  |bank       |bank	  |bank address (BA)
+ * page/row			  |row	      |page	  |row address
+ * ???				  |column     |column	  |column address
+ *
+ * The naming confusion is further exacerbated by the descriptions of the
+ * memory controller interleaving feature, where accesses are interleaved
+ * _BETWEEN_ two seperate memory controllers.  This is configured only in
+ * CS0_CONFIG[INTLV_CTL] of each memory controller.
+ *
+ * memory controller documentation | number of chip selects
+ *				   | per memory controller supported
+ * --------------------------------|-----------------------------------------
+ * cache line interleaving	   | 1 (CS0 only)
+ * page interleaving		   | 1 (CS0 only)
+ * bank interleaving		   | 1 (CS0 only)
+ * superbank interleraving	   | depends on bank (chip select)
+ *				   |   interleraving [rank interleaving]
+ *				   |   mode used on every memory controller
+ *
+ * Even further confusing is the existence of the interleaving feature
+ * _WITHIN_ each memory controller.  The feature is referred to in
+ * documentation as chip select interleaving or bank interleaving,
+ * although it is configured in the DDR_SDRAM_CFG field.
+ *
+ * Name of field		| documentation name	| this code
+ * -----------------------------|-----------------------|------------------
+ * DDR_SDRAM_CFG[BA_INTLV_CTL]	| Bank (chip select)	| rank interleaving
+ *				|  interleaving
+ */
+
+const char *step_string_tbl[] = {
+	"STEP_GET_SPD",
+	"STEP_COMPUTE_DIMM_PARMS",
+	"STEP_COMPUTE_COMMON_PARMS",
+	"STEP_GATHER_OPTS",
+	"STEP_ASSIGN_ADDRESSES",
+	"STEP_COMPUTE_REGS",
+	"STEP_PROGRAM_REGS",
+	"STEP_ALL"
+};
+
+const char * step_to_string(unsigned int step) {
+
+	unsigned int s = __ilog2(step);
+
+	if ((1 << s) != step)
+		return step_string_tbl[7];
+
+	return step_string_tbl[s];
+}
+
+static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
+			  unsigned int dbw_cap_adj[])
+{
+	int i, j;
+	unsigned long long total_mem, current_mem_base, total_ctlr_mem;
+	unsigned long long rank_density, ctlr_density = 0;
+
+	/*
+	 * If a reduced data width is requested, but the SPD
+	 * specifies a physically wider device, adjust the
+	 * computed dimm capacities accordingly before
+	 * assigning addresses.
+	 */
+	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+		unsigned int found = 0;
+
+		switch (pinfo->memctl_opts[i].data_bus_width) {
+		case 2:
+			/* 16-bit */
+			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+				unsigned int dw;
+				if (!pinfo->dimm_params[i][j].n_ranks)
+					continue;
+				dw = pinfo->dimm_params[i][j].primary_sdram_width;
+				if ((dw == 72 || dw == 64)) {
+					dbw_cap_adj[i] = 2;
+					break;
+				} else if ((dw == 40 || dw == 32)) {
+					dbw_cap_adj[i] = 1;
+					break;
+				}
+			}
+			break;
+
+		case 1:
+			/* 32-bit */
+			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+				unsigned int dw;
+				dw = pinfo->dimm_params[i][j].data_width;
+				if (pinfo->dimm_params[i][j].n_ranks
+				    && (dw == 72 || dw == 64)) {
+					/*
+					 * FIXME: can't really do it
+					 * like this because this just
+					 * further reduces the memory
+					 */
+					found = 1;
+					break;
+				}
+			}
+			if (found) {
+				dbw_cap_adj[i] = 1;
+			}
+			break;
+
+		case 0:
+			/* 64-bit */
+			break;
+
+		default:
+			printf("unexpected data bus width "
+				"specified controller %u\n", i);
+			return 1;
+		}
+		debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]);
+	}
+
+	current_mem_base = CONFIG_SYS_DDR_SDRAM_BASE;
+	total_mem = 0;
+	if (pinfo->memctl_opts[0].memctl_interleaving) {
+		rank_density = pinfo->dimm_params[0][0].rank_density >>
+					dbw_cap_adj[0];
+		switch (pinfo->memctl_opts[0].ba_intlv_ctl &
+					FSL_DDR_CS0_CS1_CS2_CS3) {
+		case FSL_DDR_CS0_CS1_CS2_CS3:
+			ctlr_density = 4 * rank_density;
+			break;
+		case FSL_DDR_CS0_CS1:
+		case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+			ctlr_density = 2 * rank_density;
+			break;
+		case FSL_DDR_CS2_CS3:
+		default:
+			ctlr_density = rank_density;
+			break;
+		}
+		debug("rank density is 0x%llx, ctlr density is 0x%llx\n",
+			rank_density, ctlr_density);
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			if (pinfo->memctl_opts[i].memctl_interleaving) {
+				switch (pinfo->memctl_opts[i].memctl_interleaving_mode) {
+				case FSL_DDR_CACHE_LINE_INTERLEAVING:
+				case FSL_DDR_PAGE_INTERLEAVING:
+				case FSL_DDR_BANK_INTERLEAVING:
+				case FSL_DDR_SUPERBANK_INTERLEAVING:
+					total_ctlr_mem = 2 * ctlr_density;
+					break;
+				case FSL_DDR_3WAY_1KB_INTERLEAVING:
+				case FSL_DDR_3WAY_4KB_INTERLEAVING:
+				case FSL_DDR_3WAY_8KB_INTERLEAVING:
+					total_ctlr_mem = 3 * ctlr_density;
+					break;
+				case FSL_DDR_4WAY_1KB_INTERLEAVING:
+				case FSL_DDR_4WAY_4KB_INTERLEAVING:
+				case FSL_DDR_4WAY_8KB_INTERLEAVING:
+					total_ctlr_mem = 4 * ctlr_density;
+					break;
+				default:
+					panic("Unknown interleaving mode");
+				}
+				pinfo->common_timing_params[i].base_address =
+							current_mem_base;
+				pinfo->common_timing_params[i].total_mem =
+							total_ctlr_mem;
+				total_mem = current_mem_base + total_ctlr_mem;
+				debug("ctrl %d base 0x%llx\n", i, current_mem_base);
+				debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
+			} else {
+				/* when 3rd controller not interleaved */
+				current_mem_base = total_mem;
+				total_ctlr_mem = 0;
+				pinfo->common_timing_params[i].base_address =
+							current_mem_base;
+				for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+					unsigned long long cap =
+						pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i];
+					pinfo->dimm_params[i][j].base_address =
+						current_mem_base;
+					debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base);
+					current_mem_base += cap;
+					total_ctlr_mem += cap;
+				}
+				debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
+				pinfo->common_timing_params[i].total_mem =
+							total_ctlr_mem;
+				total_mem += total_ctlr_mem;
+			}
+		}
+	} else {
+		/*
+		 * Simple linear assignment if memory
+		 * controllers are not interleaved.
+		 */
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			total_ctlr_mem = 0;
+			pinfo->common_timing_params[i].base_address =
+						current_mem_base;
+			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+				/* Compute DIMM base addresses. */
+				unsigned long long cap =
+					pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i];
+				pinfo->dimm_params[i][j].base_address =
+					current_mem_base;
+				debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base);
+				current_mem_base += cap;
+				total_ctlr_mem += cap;
+			}
+			debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
+			pinfo->common_timing_params[i].total_mem =
+							total_ctlr_mem;
+			total_mem += total_ctlr_mem;
+		}
+	}
+	debug("Total mem by %s is 0x%llx\n", __func__, total_mem);
+
+	return total_mem;
+}
+
+/* Use weak function to allow board file to override the address assignment */
+__attribute__((weak, alias("__step_assign_addresses")))
+unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
+			  unsigned int dbw_cap_adj[]);
+
+unsigned long long
+fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
+				       unsigned int size_only)
+{
+	unsigned int i, j;
+	unsigned long long total_mem = 0;
+	int assert_reset;
+
+	fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg;
+	common_timing_params_t *timing_params = pinfo->common_timing_params;
+	assert_reset = board_need_mem_reset();
+
+	/* data bus width capacity adjust shift amount */
+	unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS];
+
+	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+		dbw_capacity_adjust[i] = 0;
+	}
+
+	debug("starting at step %u (%s)\n",
+	      start_step, step_to_string(start_step));
+
+	switch (start_step) {
+	case STEP_GET_SPD:
+#if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM)
+		/* STEP 1:  Gather all DIMM SPD data */
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i);
+		}
+
+	case STEP_COMPUTE_DIMM_PARMS:
+		/* STEP 2:  Compute DIMM parameters from SPD data */
+
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+				unsigned int retval;
+				generic_spd_eeprom_t *spd =
+					&(pinfo->spd_installed_dimms[i][j]);
+				dimm_params_t *pdimm =
+					&(pinfo->dimm_params[i][j]);
+
+				retval = compute_dimm_parameters(spd, pdimm, i);
+#ifdef CONFIG_SYS_DDR_RAW_TIMING
+				if (!i && !j && retval) {
+					printf("SPD error on controller %d! "
+					"Trying fallback to raw timing "
+					"calculation\n", i);
+					fsl_ddr_get_dimm_params(pdimm, i, j);
+				}
+#else
+				if (retval == 2) {
+					printf("Error: compute_dimm_parameters"
+					" non-zero returned FATAL value "
+					"for memctl=%u dimm=%u\n", i, j);
+					return 0;
+				}
+#endif
+				if (retval) {
+					debug("Warning: compute_dimm_parameters"
+					" non-zero return value for memctl=%u "
+					"dimm=%u\n", i, j);
+				}
+			}
+		}
+
+#elif defined(CONFIG_SYS_DDR_RAW_TIMING)
+	case STEP_COMPUTE_DIMM_PARMS:
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+				dimm_params_t *pdimm =
+					&(pinfo->dimm_params[i][j]);
+				fsl_ddr_get_dimm_params(pdimm, i, j);
+			}
+		}
+		debug("Filling dimm parameters from board specific file\n");
+#endif
+	case STEP_COMPUTE_COMMON_PARMS:
+		/*
+		 * STEP 3: Compute a common set of timing parameters
+		 * suitable for all of the DIMMs on each memory controller
+		 */
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			debug("Computing lowest common DIMM"
+				" parameters for memctl=%u\n", i);
+			compute_lowest_common_dimm_parameters(
+				pinfo->dimm_params[i],
+				&timing_params[i],
+				CONFIG_DIMM_SLOTS_PER_CTLR);
+		}
+
+	case STEP_GATHER_OPTS:
+		/* STEP 4:  Gather configuration requirements from user */
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			debug("Reloading memory controller "
+				"configuration options for memctl=%u\n", i);
+			/*
+			 * This "reloads" the memory controller options
+			 * to defaults.  If the user "edits" an option,
+			 * next_step points to the step after this,
+			 * which is currently STEP_ASSIGN_ADDRESSES.
+			 */
+			populate_memctl_options(
+					timing_params[i].all_dimms_registered,
+					&pinfo->memctl_opts[i],
+					pinfo->dimm_params[i], i);
+			/*
+			 * For RDIMMs, JEDEC spec requires clocks to be stable
+			 * before reset signal is deasserted. For the boards
+			 * using fixed parameters, this function should be
+			 * be called from board init file.
+			 */
+			if (timing_params[i].all_dimms_registered)
+				assert_reset = 1;
+		}
+		if (assert_reset) {
+			debug("Asserting mem reset\n");
+			board_assert_mem_reset();
+		}
+
+	case STEP_ASSIGN_ADDRESSES:
+		/* STEP 5:  Assign addresses to chip selects */
+		check_interleaving_options(pinfo);
+		total_mem = step_assign_addresses(pinfo, dbw_capacity_adjust);
+
+	case STEP_COMPUTE_REGS:
+		/* STEP 6:  compute controller register values */
+		debug("FSL Memory ctrl register computation\n");
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			if (timing_params[i].ndimms_present == 0) {
+				memset(&ddr_reg[i], 0,
+					sizeof(fsl_ddr_cfg_regs_t));
+				continue;
+			}
+
+			compute_fsl_memctl_config_regs(
+					&pinfo->memctl_opts[i],
+					&ddr_reg[i], &timing_params[i],
+					pinfo->dimm_params[i],
+					dbw_capacity_adjust[i],
+					size_only);
+		}
+
+	default:
+		break;
+	}
+
+	{
+		/*
+		 * Compute the amount of memory available just by
+		 * looking for the highest valid CSn_BNDS value.
+		 * This allows us to also experiment with using
+		 * only CS0 when using dual-rank DIMMs.
+		 */
+		unsigned int max_end = 0;
+
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) {
+				fsl_ddr_cfg_regs_t *reg = &ddr_reg[i];
+				if (reg->cs[j].config & 0x80000000) {
+					unsigned int end;
+					/*
+					 * 0xfffffff is a special value we put
+					 * for unused bnds
+					 */
+					if (reg->cs[j].bnds == 0xffffffff)
+						continue;
+					end = reg->cs[j].bnds & 0xffff;
+					if (end > max_end) {
+						max_end = end;
+					}
+				}
+			}
+		}
+
+		total_mem = 1 + (((unsigned long long)max_end << 24ULL) |
+			    0xFFFFFFULL) - CONFIG_SYS_DDR_SDRAM_BASE;
+	}
+
+	return total_mem;
+}
+
+/*
+ * fsl_ddr_sdram() -- this is the main function to be called by
+ *	initdram() in the board file.
+ *
+ * It returns amount of memory configured in bytes.
+ */
+phys_size_t fsl_ddr_sdram(void)
+{
+	unsigned int i;
+#ifdef CONFIG_PPC
+	unsigned int law_memctl = LAW_TRGT_IF_DDR_1;
+#endif
+	unsigned long long total_memory;
+	fsl_ddr_info_t info;
+	int deassert_reset;
+
+	/* Reset info structure. */
+	memset(&info, 0, sizeof(fsl_ddr_info_t));
+
+	/* Compute it once normally. */
+#ifdef CONFIG_FSL_DDR_INTERACTIVE
+	if (tstc() && (getc() == 'd')) {	/* we got a key press of 'd' */
+		total_memory = fsl_ddr_interactive(&info, 0);
+	} else if (fsl_ddr_interactive_env_var_exists()) {
+		total_memory = fsl_ddr_interactive(&info, 1);
+	} else
+#endif
+		total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
+
+	/* setup 3-way interleaving before enabling DDRC */
+	if (info.memctl_opts[0].memctl_interleaving) {
+		switch (info.memctl_opts[0].memctl_interleaving_mode) {
+		case FSL_DDR_3WAY_1KB_INTERLEAVING:
+		case FSL_DDR_3WAY_4KB_INTERLEAVING:
+		case FSL_DDR_3WAY_8KB_INTERLEAVING:
+			fsl_ddr_set_intl3r(
+				info.memctl_opts[0].memctl_interleaving_mode);
+			break;
+		default:
+			break;
+		}
+	}
+
+	/*
+	 * Program configuration registers.
+	 * JEDEC specs requires clocks to be stable before deasserting reset
+	 * for RDIMMs. Clocks start after chip select is enabled and clock
+	 * control register is set. During step 1, all controllers have their
+	 * registers set but not enabled. Step 2 proceeds after deasserting
+	 * reset through board FPGA or GPIO.
+	 * For non-registered DIMMs, initialization can go through but it is
+	 * also OK to follow the same flow.
+	 */
+	deassert_reset = board_need_mem_reset();
+	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+		if (info.common_timing_params[i].all_dimms_registered)
+			deassert_reset = 1;
+	}
+	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+		debug("Programming controller %u\n", i);
+		if (info.common_timing_params[i].ndimms_present == 0) {
+			debug("No dimms present on controller %u; "
+					"skipping programming\n", i);
+			continue;
+		}
+		/*
+		 * The following call with step = 1 returns before enabling
+		 * the controller. It has to finish with step = 2 later.
+		 */
+		fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i,
+					deassert_reset ? 1 : 0);
+	}
+	if (deassert_reset) {
+		/* Use board FPGA or GPIO to deassert reset signal */
+		debug("Deasserting mem reset\n");
+		board_deassert_mem_reset();
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+			/* Call with step = 2 to continue initialization */
+			fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]),
+						i, 2);
+		}
+	}
+
+#ifdef CONFIG_PPC
+	/* program LAWs */
+	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+		if (info.memctl_opts[i].memctl_interleaving) {
+			switch (info.memctl_opts[i].memctl_interleaving_mode) {
+			case FSL_DDR_CACHE_LINE_INTERLEAVING:
+			case FSL_DDR_PAGE_INTERLEAVING:
+			case FSL_DDR_BANK_INTERLEAVING:
+			case FSL_DDR_SUPERBANK_INTERLEAVING:
+				if (i == 0) {
+					law_memctl = LAW_TRGT_IF_DDR_INTRLV;
+					fsl_ddr_set_lawbar(&info.common_timing_params[i],
+						law_memctl, i);
+				} else if (i == 2) {
+					law_memctl = LAW_TRGT_IF_DDR_INTLV_34;
+					fsl_ddr_set_lawbar(&info.common_timing_params[i],
+						law_memctl, i);
+				}
+				break;
+			case FSL_DDR_3WAY_1KB_INTERLEAVING:
+			case FSL_DDR_3WAY_4KB_INTERLEAVING:
+			case FSL_DDR_3WAY_8KB_INTERLEAVING:
+				law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
+				if (i == 0) {
+					fsl_ddr_set_lawbar(&info.common_timing_params[i],
+						law_memctl, i);
+				}
+				break;
+			case FSL_DDR_4WAY_1KB_INTERLEAVING:
+			case FSL_DDR_4WAY_4KB_INTERLEAVING:
+			case FSL_DDR_4WAY_8KB_INTERLEAVING:
+				law_memctl = LAW_TRGT_IF_DDR_INTLV_1234;
+				if (i == 0)
+					fsl_ddr_set_lawbar(&info.common_timing_params[i],
+						law_memctl, i);
+				/* place holder for future 4-way interleaving */
+				break;
+			default:
+				break;
+			}
+		} else {
+			switch (i) {
+			case 0:
+				law_memctl = LAW_TRGT_IF_DDR_1;
+				break;
+			case 1:
+				law_memctl = LAW_TRGT_IF_DDR_2;
+				break;
+			case 2:
+				law_memctl = LAW_TRGT_IF_DDR_3;
+				break;
+			case 3:
+				law_memctl = LAW_TRGT_IF_DDR_4;
+				break;
+			default:
+				break;
+			}
+			fsl_ddr_set_lawbar(&info.common_timing_params[i],
+					law_memctl, i);
+		}
+	}
+#endif
+
+	debug("total_memory by %s = %llu\n", __func__, total_memory);
+
+#if !defined(CONFIG_PHYS_64BIT)
+	/* Check for 4G or more.  Bad. */
+	if (total_memory >= (1ull << 32)) {
+		puts("Detected ");
+		print_size(total_memory, " of memory\n");
+		printf("       This U-Boot only supports < 4G of DDR\n");
+		printf("       You could rebuild it with CONFIG_PHYS_64BIT\n");
+		printf("       "); /* re-align to match init_func_ram print */
+		total_memory = CONFIG_MAX_MEM_MAPPED;
+	}
+#endif
+
+	return total_memory;
+}
+
+/*
+ * fsl_ddr_sdram_size() - This function only returns the size of the total
+ * memory without setting ddr control registers.
+ */
+phys_size_t
+fsl_ddr_sdram_size(void)
+{
+	fsl_ddr_info_t  info;
+	unsigned long long total_memory = 0;
+
+	memset(&info, 0 , sizeof(fsl_ddr_info_t));
+
+	/* Compute it once normally. */
+	total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 1);
+
+	return total_memory;
+}
diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen1.c b/drivers/ddr/fsl/mpc85xx_ddr_gen1.c
new file mode 100644
index 0000000..8dd4a91
--- /dev/null
+++ b/drivers/ddr/fsl/mpc85xx_ddr_gen1.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <fsl_ddr_sdram.h>
+
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
+#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
+#endif
+
+void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+			     unsigned int ctrl_num, int step)
+{
+	unsigned int i;
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
+
+	if (ctrl_num != 0) {
+		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+		return;
+	}
+
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (i == 0) {
+			out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs0_config, regs->cs[i].config);
+
+		} else if (i == 1) {
+			out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs1_config, regs->cs[i].config);
+
+		} else if (i == 2) {
+			out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs2_config, regs->cs[i].config);
+
+		} else if (i == 3) {
+			out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs3_config, regs->cs[i].config);
+		}
+	}
+
+	out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+	out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+	out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+	out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+#if defined(CONFIG_MPC8555) || defined(CONFIG_MPC8541)
+	out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+#endif
+
+	/*
+	 * 200 painful micro-seconds must elapse between
+	 * the DDR clock setup and the DDR config enable.
+	 */
+	udelay(200);
+	asm volatile("sync;isync");
+
+	out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
+
+	asm("sync;isync;msync");
+	udelay(500);
+}
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+/*
+ * Initialize all of memory for ECC, then enable errors.
+ */
+
+void
+ddr_enable_ecc(unsigned int dram_size)
+{
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);
+
+	dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
+
+	/*
+	 * Enable errors for ECC.
+	 */
+	debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
+	ddr->err_disable = 0x00000000;
+	asm("sync;isync;msync");
+	debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
+}
+
+#endif	/* CONFIG_DDR_ECC  && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */
diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen2.c b/drivers/ddr/fsl/mpc85xx_ddr_gen2.c
new file mode 100644
index 0000000..988b4a4
--- /dev/null
+++ b/drivers/ddr/fsl/mpc85xx_ddr_gen2.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <fsl_ddr_sdram.h>
+
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
+#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
+#endif
+
+void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+			     unsigned int ctrl_num, int step)
+{
+	unsigned int i;
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx)
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	uint svr;
+#endif
+
+	if (ctrl_num) {
+		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+		return;
+	}
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+	/*
+	 * Set the DDR IO receiver to an acceptable bias point.
+	 * Fixed in Rev 2.1.
+	 */
+	svr = get_svr();
+	if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) {
+		if ((regs->ddr_sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) ==
+		   SDRAM_CFG_SDRAM_TYPE_DDR2)
+			out_be32(&gur->ddrioovcr, 0x90000000);
+		else
+			out_be32(&gur->ddrioovcr, 0xA8000000);
+	}
+#endif
+
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (i == 0) {
+			out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs0_config, regs->cs[i].config);
+
+		} else if (i == 1) {
+			out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs1_config, regs->cs[i].config);
+
+		} else if (i == 2) {
+			out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs2_config, regs->cs[i].config);
+
+		} else if (i == 3) {
+			out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs3_config, regs->cs[i].config);
+		}
+	}
+
+	out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
+	out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
+	out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+	out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+	out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+	out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+	out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
+	out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
+	out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+	out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
+	out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+	out_be32(&ddr->init_addr, regs->ddr_init_addr);
+	out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+
+	/*
+	 * 200 painful micro-seconds must elapse between
+	 * the DDR clock setup and the DDR config enable.
+	 */
+	udelay(200);
+	asm volatile("sync;isync");
+
+	out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
+
+	/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done.  */
+	while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
+		udelay(10000);		/* throttle polling rate */
+	}
+}
diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
new file mode 100644
index 0000000..9f04133
--- /dev/null
+++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
@@ -0,0 +1,464 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/processor.h>
+
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
+#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
+#endif
+
+
+/*
+ * regs has the to-be-set values for DDR controller registers
+ * ctrl_num is the DDR controller number
+ * step: 0 goes through the initialization in one pass
+ *       1 sets registers and returns before enabling controller
+ *       2 resumes from step 1 and continues to initialize
+ * Dividing the initialization to two steps to deassert DDR reset signal
+ * to comply with JEDEC specs for RDIMMs.
+ */
+void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+			     unsigned int ctrl_num, int step)
+{
+	unsigned int i, bus_width;
+	struct ccsr_ddr __iomem *ddr;
+	u32 temp_sdram_cfg;
+	u32 total_gb_size_per_controller;
+	int timeout;
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	int timeout_save;
+	volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
+	unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
+	int csn = -1;
+#endif
+
+	switch (ctrl_num) {
+	case 0:
+		ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+		break;
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+	case 1:
+		ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
+		break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+	case 2:
+		ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
+		break;
+#endif
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+	case 3:
+		ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
+		break;
+#endif
+	default:
+		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+		return;
+	}
+
+	if (step == 2)
+		goto step2;
+
+	if (regs->ddr_eor)
+		out_be32(&ddr->eor, regs->ddr_eor);
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	debug("Workaround for ERRATUM_DDR111_DDR134\n");
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		cs_sa = (regs->cs[i].bnds >> 16) & 0xfff;
+		cs_ea = regs->cs[i].bnds & 0xfff;
+		if ((cs_sa <= 0xff) && (cs_ea >= 0xff)) {
+			csn = i;
+			csn_bnds_backup = regs->cs[i].bnds;
+			csn_bnds_t = (unsigned int *) &regs->cs[i].bnds;
+			if (cs_ea > 0xeff)
+				*csn_bnds_t = regs->cs[i].bnds + 0x01000000;
+			else
+				*csn_bnds_t = regs->cs[i].bnds + 0x01000100;
+			debug("Found cs%d_bns (0x%08x) covering 0xff000000, "
+				"change it to 0x%x\n",
+				csn, csn_bnds_backup, regs->cs[i].bnds);
+			break;
+		}
+	}
+#endif
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (i == 0) {
+			out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs0_config, regs->cs[i].config);
+			out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
+
+		} else if (i == 1) {
+			out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs1_config, regs->cs[i].config);
+			out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
+
+		} else if (i == 2) {
+			out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs2_config, regs->cs[i].config);
+			out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
+
+		} else if (i == 3) {
+			out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs3_config, regs->cs[i].config);
+			out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
+		}
+	}
+
+	out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
+	out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
+	out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+	out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+	out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+	out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+	out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
+	out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
+	out_be32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4);
+	out_be32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5);
+	out_be32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6);
+	out_be32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7);
+	out_be32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8);
+	out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
+	out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+	out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
+	out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+	out_be32(&ddr->init_addr, regs->ddr_init_addr);
+	out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+
+	out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
+	out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
+	out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
+	out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+#ifndef CONFIG_SYS_FSL_DDR_EMU
+	/*
+	 * Skip these two registers if running on emulator
+	 * because emulator doesn't have skew between bytes.
+	 */
+
+	if (regs->ddr_wrlvl_cntl_2)
+		out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
+	if (regs->ddr_wrlvl_cntl_3)
+		out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
+#endif
+
+	out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
+	out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
+	out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
+	out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
+	out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+	out_be32(&ddr->err_disable, regs->err_disable);
+	out_be32(&ddr->err_int_en, regs->err_int_en);
+	for (i = 0; i < 32; i++) {
+		if (regs->debug[i]) {
+			debug("Write to debug_%d as %08x\n", i+1, regs->debug[i]);
+			out_be32(&ddr->debug[i], regs->debug[i]);
+		}
+	}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+	out_be32(&ddr->debug[28], 0x30003000);
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+	out_be32(&ddr->debug[12], 0x00000015);
+	out_be32(&ddr->debug[21], 0x24000000);
+#endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */
+
+	/*
+	 * For RDIMMs, JEDEC spec requires clocks to be stable before reset is
+	 * deasserted. Clocks start when any chip select is enabled and clock
+	 * control register is set. Because all DDR components are connected to
+	 * one reset signal, this needs to be done in two steps. Step 1 is to
+	 * get the clocks started. Step 2 resumes after reset signal is
+	 * deasserted.
+	 */
+	if (step == 1) {
+		udelay(200);
+		return;
+	}
+
+step2:
+	/* Set, but do not enable the memory */
+	temp_sdram_cfg = regs->ddr_sdram_cfg;
+	temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
+	out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
+	debug("Workaround for ERRATUM_DDR_A003\n");
+	if (regs->ddr_sdram_rcw_2 & 0x00f00000) {
+		out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2 & 0xf07fffff);
+		out_be32(&ddr->debug[2], 0x00000400);
+		out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl & 0x7fffffff);
+		out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl & 0x7fffffff);
+		out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2 & 0xffffffeb);
+		out_be32(&ddr->mtcr, 0);
+		out_be32(&ddr->debug[12], 0x00000015);
+		out_be32(&ddr->debug[21], 0x24000000);
+		out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval & 0xffff);
+		out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_BI | SDRAM_CFG_MEM_EN);
+
+		asm volatile("sync;isync");
+		while (!(in_be32(&ddr->debug[1]) & 0x2))
+			;
+
+		switch (regs->ddr_sdram_rcw_2 & 0x00f00000) {
+		case 0x00000000:
+			out_be32(&ddr->sdram_md_cntl,
+				MD_CNTL_MD_EN		|
+				MD_CNTL_CS_SEL_CS0_CS1	|
+				0x04000000		|
+				MD_CNTL_WRCW		|
+				MD_CNTL_MD_VALUE(0x02));
+			break;
+		case 0x00100000:
+			out_be32(&ddr->sdram_md_cntl,
+				MD_CNTL_MD_EN		|
+				MD_CNTL_CS_SEL_CS0_CS1	|
+				0x04000000		|
+				MD_CNTL_WRCW		|
+				MD_CNTL_MD_VALUE(0x0a));
+			break;
+		case 0x00200000:
+			out_be32(&ddr->sdram_md_cntl,
+				MD_CNTL_MD_EN		|
+				MD_CNTL_CS_SEL_CS0_CS1	|
+				0x04000000		|
+				MD_CNTL_WRCW		|
+				MD_CNTL_MD_VALUE(0x12));
+			break;
+		case 0x00300000:
+			out_be32(&ddr->sdram_md_cntl,
+				MD_CNTL_MD_EN		|
+				MD_CNTL_CS_SEL_CS0_CS1	|
+				0x04000000		|
+				MD_CNTL_WRCW		|
+				MD_CNTL_MD_VALUE(0x1a));
+			break;
+		default:
+			out_be32(&ddr->sdram_md_cntl,
+				MD_CNTL_MD_EN		|
+				MD_CNTL_CS_SEL_CS0_CS1	|
+				0x04000000		|
+				MD_CNTL_WRCW		|
+				MD_CNTL_MD_VALUE(0x02));
+			printf("Unsupported RC10\n");
+			break;
+		}
+
+		while (in_be32(&ddr->sdram_md_cntl) & 0x80000000)
+			;
+		udelay(6);
+		out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
+		out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+		out_be32(&ddr->debug[2], 0x0);
+		out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
+		out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+		out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+		out_be32(&ddr->debug[12], 0x0);
+		out_be32(&ddr->debug[21], 0x0);
+		out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+
+	}
+#endif
+	/*
+	 * For 8572 DDR1 erratum - DDR controller may enter illegal state
+	 * when operatiing in 32-bit bus mode with 4-beat bursts,
+	 * This erratum does not affect DDR3 mode, only for DDR2 mode.
+	 */
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
+	debug("Workaround for ERRATUM_DDR_115\n");
+	if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
+	    && in_be32(&ddr->sdram_cfg) & 0x80000) {
+		/* set DEBUG_1[31] */
+		setbits_be32(&ddr->debug[0], 1);
+	}
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	debug("Workaround for ERRATUM_DDR111_DDR134\n");
+	/*
+	 * This is the combined workaround for DDR111 and DDR134
+	 * following the published errata for MPC8572
+	 */
+
+	/* 1. Set EEBACR[3] */
+	setbits_be32(&ecm->eebacr, 0x10000000);
+	debug("Setting EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
+
+	/* 2. Set DINIT in SDRAM_CFG_2*/
+	setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_D_INIT);
+	debug("Setting sdram_cfg_2[D_INIT] to 0x%08x\n",
+		in_be32(&ddr->sdram_cfg_2));
+
+	/* 3. Set DEBUG_3[21] */
+	setbits_be32(&ddr->debug[2], 0x400);
+	debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
+
+#endif	/* part 1 of the workaound */
+
+	/*
+	 * 500 painful micro-seconds must elapse between
+	 * the DDR clock setup and the DDR config enable.
+	 * DDR2 need 200 us, and DDR3 need 500 us from spec,
+	 * we choose the max, that is 500 us for all of case.
+	 */
+	udelay(500);
+	asm volatile("sync;isync");
+
+	/* Let the controller go */
+	temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
+	out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
+	asm volatile("sync;isync");
+
+	total_gb_size_per_controller = 0;
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (!(regs->cs[i].config & 0x80000000))
+			continue;
+		total_gb_size_per_controller += 1 << (
+			((regs->cs[i].config >> 14) & 0x3) + 2 +
+			((regs->cs[i].config >> 8) & 0x7) + 12 +
+			((regs->cs[i].config >> 0) & 0x7) + 8 +
+			3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
+			26);			/* minus 26 (count of 64M) */
+	}
+	if (fsl_ddr_get_intl3r() & 0x80000000)	/* 3-way interleaving */
+		total_gb_size_per_controller *= 3;
+	else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
+		total_gb_size_per_controller <<= 1;
+	/*
+	 * total memory / bus width = transactions needed
+	 * transactions needed / data rate = seconds
+	 * to add plenty of buffer, double the time
+	 * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
+	 * Let's wait for 800ms
+	 */
+	bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
+			>> SDRAM_CFG_DBW_SHIFT);
+	timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
+		(get_ddr_freq(0) >> 20)) << 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	timeout_save = timeout;
+#endif
+	total_gb_size_per_controller >>= 4;	/* shift down to gb size */
+	debug("total %d GB\n", total_gb_size_per_controller);
+	debug("Need to wait up to %d * 10ms\n", timeout);
+
+	/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done.  */
+	while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+		(timeout >= 0)) {
+		udelay(10000);		/* throttle polling rate */
+		timeout--;
+	}
+
+	if (timeout <= 0)
+		printf("Waiting for D_INIT timeout. Memory may not work.\n");
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	/* continue this workaround */
+
+	/* 4. Clear DEBUG3[21] */
+	clrbits_be32(&ddr->debug[2], 0x400);
+	debug("Clearing D3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
+
+	/* DDR134 workaround starts */
+	/* A: Clear sdram_cfg_2[odt_cfg] */
+	clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_ODT_CFG_MASK);
+	debug("Clearing SDRAM_CFG2[ODT_CFG] to 0x%08x\n",
+		in_be32(&ddr->sdram_cfg_2));
+
+	/* B: Set DEBUG1[15] */
+	setbits_be32(&ddr->debug[0], 0x10000);
+	debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
+
+	/* C: Set timing_cfg_2[cpo] to 0b11111 */
+	setbits_be32(&ddr->timing_cfg_2, TIMING_CFG_2_CPO_MASK);
+	debug("Setting TMING_CFG_2[CPO] to 0x%08x\n",
+		in_be32(&ddr->timing_cfg_2));
+
+	/* D: Set D6 to 0x9f9f9f9f */
+	out_be32(&ddr->debug[5], 0x9f9f9f9f);
+	debug("Setting D6 to 0x%08x\n", in_be32(&ddr->debug[5]));
+
+	/* E: Set D7 to 0x9f9f9f9f */
+	out_be32(&ddr->debug[6], 0x9f9f9f9f);
+	debug("Setting D7 to 0x%08x\n", in_be32(&ddr->debug[6]));
+
+	/* F: Set D2[20] */
+	setbits_be32(&ddr->debug[1], 0x800);
+	debug("Setting D2[20] to 0x%08x\n", in_be32(&ddr->debug[1]));
+
+	/* G: Poll on D2[20] until cleared */
+	while (in_be32(&ddr->debug[1]) & 0x800)
+		udelay(10000);          /* throttle polling rate */
+
+	/* H: Clear D1[15] */
+	clrbits_be32(&ddr->debug[0], 0x10000);
+	debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
+
+	/* I: Set sdram_cfg_2[odt_cfg] */
+	setbits_be32(&ddr->sdram_cfg_2,
+		regs->ddr_sdram_cfg_2 & SDRAM_CFG2_ODT_CFG_MASK);
+	debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
+
+	/* Continuing with the DDR111 workaround */
+	/* 5. Set D2[21] */
+	setbits_be32(&ddr->debug[1], 0x400);
+	debug("Setting D2[21] to 0x%08x\n", in_be32(&ddr->debug[1]));
+
+	/* 6. Poll D2[21] until its cleared */
+	while (in_be32(&ddr->debug[1]) & 0x400)
+		udelay(10000);          /* throttle polling rate */
+
+	/* 7. Wait for state machine 2nd run, roughly 400ms/GB */
+	debug("Wait for %d * 10ms\n", timeout_save);
+	udelay(timeout_save * 10000);
+
+	/* 8. Set sdram_cfg_2[dinit] if options requires */
+	setbits_be32(&ddr->sdram_cfg_2,
+		regs->ddr_sdram_cfg_2 & SDRAM_CFG2_D_INIT);
+	debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
+
+	/* 9. Poll until dinit is cleared */
+	timeout = timeout_save;
+	debug("Need to wait up to %d * 10ms\n", timeout);
+	while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+		(timeout >= 0)) {
+		udelay(10000);		/* throttle polling rate */
+		timeout--;
+	}
+
+	if (timeout <= 0)
+		printf("Waiting for D_INIT timeout. Memory may not work.\n");
+
+	/* 10. Clear EEBACR[3] */
+	clrbits_be32(&ecm->eebacr, 10000000);
+	debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
+
+	if (csn != -1) {
+		csn_bnds_t = (unsigned int *) &regs->cs[csn].bnds;
+		*csn_bnds_t = csn_bnds_backup;
+		debug("Change cs%d_bnds back to 0x%08x\n",
+			csn, regs->cs[csn].bnds);
+		setbits_be32(&ddr->sdram_cfg, 0x2);	/* MEM_HALT */
+		switch (csn) {
+		case 0:
+			out_be32(&ddr->cs0_bnds, regs->cs[csn].bnds);
+			break;
+		case 1:
+			out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds);
+			break;
+		case 2:
+			out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds);
+			break;
+		case 3:
+			out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds);
+			break;
+		}
+		clrbits_be32(&ddr->sdram_cfg, 0x2);
+	}
+#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
+}
diff --git a/drivers/ddr/fsl/mpc86xx_ddr.c b/drivers/ddr/fsl/mpc86xx_ddr.c
new file mode 100644
index 0000000..4551ed8
--- /dev/null
+++ b/drivers/ddr/fsl/mpc86xx_ddr.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <fsl_ddr_sdram.h>
+
+#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
+#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
+#endif
+
+void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+			     unsigned int ctrl_num, int step)
+{
+	unsigned int i;
+	struct ccsr_ddr __iomem *ddr;
+
+	switch (ctrl_num) {
+	case 0:
+		ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+		break;
+	case 1:
+		ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
+		break;
+	default:
+		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+		return;
+	}
+
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (i == 0) {
+			out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs0_config, regs->cs[i].config);
+
+		} else if (i == 1) {
+			out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs1_config, regs->cs[i].config);
+
+		} else if (i == 2) {
+			out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs2_config, regs->cs[i].config);
+
+		} else if (i == 3) {
+			out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
+			out_be32(&ddr->cs3_config, regs->cs[i].config);
+		}
+	}
+
+	out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
+	out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
+	out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
+	out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
+	out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+	out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
+	out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
+	out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
+	out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
+	out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
+	out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
+	out_be32(&ddr->init_addr, regs->ddr_init_addr);
+	out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+
+	debug("before go\n");
+
+	/*
+	 * 200 painful micro-seconds must elapse between
+	 * the DDR clock setup and the DDR config enable.
+	 */
+	udelay(200);
+	asm volatile("sync;isync");
+
+	out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
+
+	/*
+	 * Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done
+	 */
+	while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
+		udelay(10000);		/* throttle polling rate */
+	}
+}
diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c
new file mode 100644
index 0000000..4aafcce
--- /dev/null
+++ b/drivers/ddr/fsl/options.c
@@ -0,0 +1,1147 @@
+/*
+ * Copyright 2008, 2010-2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <hwconfig.h>
+#include <fsl_ddr_sdram.h>
+
+#include <fsl_ddr.h>
+
+/*
+ * Use our own stack based buffer before relocation to allow accessing longer
+ * hwconfig strings that might be in the environment before we've relocated.
+ * This is pretty fragile on both the use of stack and if the buffer is big
+ * enough. However we will get a warning from getenv_f for the later.
+ */
+
+/* Board-specific functions defined in each board's ddr.c */
+extern void fsl_ddr_board_options(memctl_options_t *popts,
+		dimm_params_t *pdimm,
+		unsigned int ctrl_num);
+
+struct dynamic_odt {
+	unsigned int odt_rd_cfg;
+	unsigned int odt_wr_cfg;
+	unsigned int odt_rtt_norm;
+	unsigned int odt_rtt_wr;
+};
+
+#ifdef CONFIG_SYS_FSL_DDR3
+static const struct dynamic_odt single_Q[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS_AND_OTHER_DIMM,
+		DDR3_RTT_20_OHM,
+		DDR3_RTT_120_OHM
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,	/* tied high */
+		DDR3_RTT_OFF,
+		DDR3_RTT_120_OHM
+	},
+	{	/* cs2 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS_AND_OTHER_DIMM,
+		DDR3_RTT_20_OHM,
+		DDR3_RTT_120_OHM
+	},
+	{	/* cs3 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,	/* tied high */
+		DDR3_RTT_OFF,
+		DDR3_RTT_120_OHM
+	}
+};
+
+static const struct dynamic_odt single_D[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_ALL,
+		DDR3_RTT_40_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR3_RTT_OFF,
+		DDR3_RTT_OFF
+	},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0}
+};
+
+static const struct dynamic_odt single_S[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_ALL,
+		DDR3_RTT_40_OHM,
+		DDR3_RTT_OFF
+	},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+};
+
+static const struct dynamic_odt dual_DD[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_SAME_DIMM,
+		DDR3_RTT_120_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR3_RTT_30_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs2 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_SAME_DIMM,
+		DDR3_RTT_120_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs3 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR3_RTT_30_OHM,
+		DDR3_RTT_OFF
+	}
+};
+
+static const struct dynamic_odt dual_DS[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_SAME_DIMM,
+		DDR3_RTT_120_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR3_RTT_30_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs2 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_ALL,
+		DDR3_RTT_20_OHM,
+		DDR3_RTT_120_OHM
+	},
+	{0, 0, 0, 0}
+};
+static const struct dynamic_odt dual_SD[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_ALL,
+		DDR3_RTT_20_OHM,
+		DDR3_RTT_120_OHM
+	},
+	{0, 0, 0, 0},
+	{	/* cs2 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_SAME_DIMM,
+		DDR3_RTT_120_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs3 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR3_RTT_20_OHM,
+		DDR3_RTT_OFF
+	}
+};
+
+static const struct dynamic_odt dual_SS[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_ALL,
+		DDR3_RTT_30_OHM,
+		DDR3_RTT_120_OHM
+	},
+	{0, 0, 0, 0},
+	{	/* cs2 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_ALL,
+		DDR3_RTT_30_OHM,
+		DDR3_RTT_120_OHM
+	},
+	{0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_D0[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_SAME_DIMM,
+		DDR3_RTT_40_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR3_RTT_OFF,
+		DDR3_RTT_OFF
+	},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_0D[4] = {
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+	{	/* cs2 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_SAME_DIMM,
+		DDR3_RTT_40_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs3 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR3_RTT_OFF,
+		DDR3_RTT_OFF
+	}
+};
+
+static const struct dynamic_odt dual_S0[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS,
+		DDR3_RTT_40_OHM,
+		DDR3_RTT_OFF
+	},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0}
+
+};
+
+static const struct dynamic_odt dual_0S[4] = {
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+	{	/* cs2 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS,
+		DDR3_RTT_40_OHM,
+		DDR3_RTT_OFF
+	},
+	{0, 0, 0, 0}
+
+};
+
+static const struct dynamic_odt odt_unknown[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS,
+		DDR3_RTT_120_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS,
+		DDR3_RTT_120_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs2 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS,
+		DDR3_RTT_120_OHM,
+		DDR3_RTT_OFF
+	},
+	{	/* cs3 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS,
+		DDR3_RTT_120_OHM,
+		DDR3_RTT_OFF
+	}
+};
+#else	/* CONFIG_SYS_FSL_DDR3 */
+static const struct dynamic_odt single_Q[4] = {
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0}
+};
+
+static const struct dynamic_odt single_D[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_ALL,
+		DDR2_RTT_150_OHM,
+		DDR2_RTT_OFF
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR2_RTT_OFF,
+		DDR2_RTT_OFF
+	},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0}
+};
+
+static const struct dynamic_odt single_S[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_ALL,
+		DDR2_RTT_150_OHM,
+		DDR2_RTT_OFF
+	},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+};
+
+static const struct dynamic_odt dual_DD[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR2_RTT_75_OHM,
+		DDR2_RTT_OFF
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR2_RTT_OFF,
+		DDR2_RTT_OFF
+	},
+	{	/* cs2 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR2_RTT_75_OHM,
+		DDR2_RTT_OFF
+	},
+	{	/* cs3 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR2_RTT_OFF,
+		DDR2_RTT_OFF
+	}
+};
+
+static const struct dynamic_odt dual_DS[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR2_RTT_75_OHM,
+		DDR2_RTT_OFF
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR2_RTT_OFF,
+		DDR2_RTT_OFF
+	},
+	{	/* cs2 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR2_RTT_75_OHM,
+		DDR2_RTT_OFF
+	},
+	{0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_SD[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR2_RTT_75_OHM,
+		DDR2_RTT_OFF
+	},
+	{0, 0, 0, 0},
+	{	/* cs2 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR2_RTT_75_OHM,
+		DDR2_RTT_OFF
+	},
+	{	/* cs3 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR2_RTT_OFF,
+		DDR2_RTT_OFF
+	}
+};
+
+static const struct dynamic_odt dual_SS[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR2_RTT_75_OHM,
+		DDR2_RTT_OFF
+	},
+	{0, 0, 0, 0},
+	{	/* cs2 */
+		FSL_DDR_ODT_OTHER_DIMM,
+		FSL_DDR_ODT_OTHER_DIMM,
+		DDR2_RTT_75_OHM,
+		DDR2_RTT_OFF
+	},
+	{0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_D0[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_ALL,
+		DDR2_RTT_150_OHM,
+		DDR2_RTT_OFF
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR2_RTT_OFF,
+		DDR2_RTT_OFF
+	},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0}
+};
+
+static const struct dynamic_odt dual_0D[4] = {
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+	{	/* cs2 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_ALL,
+		DDR2_RTT_150_OHM,
+		DDR2_RTT_OFF
+	},
+	{	/* cs3 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR2_RTT_OFF,
+		DDR2_RTT_OFF
+	}
+};
+
+static const struct dynamic_odt dual_S0[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS,
+		DDR2_RTT_150_OHM,
+		DDR2_RTT_OFF
+	},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+	{0, 0, 0, 0}
+
+};
+
+static const struct dynamic_odt dual_0S[4] = {
+	{0, 0, 0, 0},
+	{0, 0, 0, 0},
+	{	/* cs2 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS,
+		DDR2_RTT_150_OHM,
+		DDR2_RTT_OFF
+	},
+	{0, 0, 0, 0}
+
+};
+
+static const struct dynamic_odt odt_unknown[4] = {
+	{	/* cs0 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS,
+		DDR2_RTT_75_OHM,
+		DDR2_RTT_OFF
+	},
+	{	/* cs1 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR2_RTT_OFF,
+		DDR2_RTT_OFF
+	},
+	{	/* cs2 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_CS,
+		DDR2_RTT_75_OHM,
+		DDR2_RTT_OFF
+	},
+	{	/* cs3 */
+		FSL_DDR_ODT_NEVER,
+		FSL_DDR_ODT_NEVER,
+		DDR2_RTT_OFF,
+		DDR2_RTT_OFF
+	}
+};
+#endif
+
+/*
+ * Automatically seleect bank interleaving mode based on DIMMs
+ * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
+ * This function only deal with one or two slots per controller.
+ */
+static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
+{
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+	if (pdimm[0].n_ranks == 4)
+		return FSL_DDR_CS0_CS1_CS2_CS3;
+	else if (pdimm[0].n_ranks == 2)
+		return FSL_DDR_CS0_CS1;
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+	if (pdimm[0].n_ranks == 4)
+		return FSL_DDR_CS0_CS1_CS2_CS3;
+#endif
+	if (pdimm[0].n_ranks == 2) {
+		if (pdimm[1].n_ranks == 2)
+			return FSL_DDR_CS0_CS1_CS2_CS3;
+		else
+			return FSL_DDR_CS0_CS1;
+	}
+#endif
+	return 0;
+}
+
+unsigned int populate_memctl_options(int all_dimms_registered,
+			memctl_options_t *popts,
+			dimm_params_t *pdimm,
+			unsigned int ctrl_num)
+{
+	unsigned int i;
+	char buffer[HWCONFIG_BUFFER_SIZE];
+	char *buf = NULL;
+#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2)
+	const struct dynamic_odt *pdodt = odt_unknown;
+#endif
+	ulong ddr_freq;
+
+	/*
+	 * Extract hwconfig from environment since we have not properly setup
+	 * the environment but need it for ddr config params
+	 */
+	if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
+		buf = buffer;
+
+#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2)
+	/* Chip select options. */
+	if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) {
+		switch (pdimm[0].n_ranks) {
+		case 1:
+			pdodt = single_S;
+			break;
+		case 2:
+			pdodt = single_D;
+			break;
+		case 4:
+			pdodt = single_Q;
+			break;
+		}
+	} else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
+		switch (pdimm[0].n_ranks) {
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+		case 4:
+			pdodt = single_Q;
+			if (pdimm[1].n_ranks)
+				printf("Error: Quad- and Dual-rank DIMMs "
+					"cannot be used together\n");
+			break;
+#endif
+		case 2:
+			switch (pdimm[1].n_ranks) {
+			case 2:
+				pdodt = dual_DD;
+				break;
+			case 1:
+				pdodt = dual_DS;
+				break;
+			case 0:
+				pdodt = dual_D0;
+				break;
+			}
+			break;
+		case 1:
+			switch (pdimm[1].n_ranks) {
+			case 2:
+				pdodt = dual_SD;
+				break;
+			case 1:
+				pdodt = dual_SS;
+				break;
+			case 0:
+				pdodt = dual_S0;
+				break;
+			}
+			break;
+		case 0:
+			switch (pdimm[1].n_ranks) {
+			case 2:
+				pdodt = dual_0D;
+				break;
+			case 1:
+				pdodt = dual_0S;
+				break;
+			}
+			break;
+		}
+	}
+#endif
+
+	/* Pick chip-select local options. */
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2)
+		popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg;
+		popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg;
+		popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm;
+		popts->cs_local_opts[i].odt_rtt_wr = pdodt[i].odt_rtt_wr;
+#else
+		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+#endif
+		popts->cs_local_opts[i].auto_precharge = 0;
+	}
+
+	/* Pick interleaving mode. */
+
+	/*
+	 * 0 = no interleaving
+	 * 1 = interleaving between 2 controllers
+	 */
+	popts->memctl_interleaving = 0;
+
+	/*
+	 * 0 = cacheline
+	 * 1 = page
+	 * 2 = (logical) bank
+	 * 3 = superbank (only if CS interleaving is enabled)
+	 */
+	popts->memctl_interleaving_mode = 0;
+
+	/*
+	 * 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl
+	 * 1: page:      bit to the left of the column bits selects the memctl
+	 * 2: bank:      bit to the left of the bank bits selects the memctl
+	 * 3: superbank: bit to the left of the chip select selects the memctl
+	 *
+	 * NOTE: ba_intlv (rank interleaving) is independent of memory
+	 * controller interleaving; it is only within a memory controller.
+	 * Must use superbank interleaving if rank interleaving is used and
+	 * memory controller interleaving is enabled.
+	 */
+
+	/*
+	 * 0 = no
+	 * 0x40 = CS0,CS1
+	 * 0x20 = CS2,CS3
+	 * 0x60 = CS0,CS1 + CS2,CS3
+	 * 0x04 = CS0,CS1,CS2,CS3
+	 */
+	popts->ba_intlv_ctl = 0;
+
+	/* Memory Organization Parameters */
+	popts->registered_dimm_en = all_dimms_registered;
+
+	/* Operational Mode Paramters */
+
+	/* Pick ECC modes */
+	popts->ecc_mode = 0;		  /* 0 = disabled, 1 = enabled */
+#ifdef CONFIG_DDR_ECC
+	if (hwconfig_sub_f("fsl_ddr", "ecc", buf)) {
+		if (hwconfig_subarg_cmp_f("fsl_ddr", "ecc", "on", buf))
+			popts->ecc_mode = 1;
+	} else
+		popts->ecc_mode = 1;
+#endif
+	popts->ecc_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */
+
+	/*
+	 * Choose DQS config
+	 * 0 for DDR1
+	 * 1 for DDR2
+	 */
+#if defined(CONFIG_SYS_FSL_DDR1)
+	popts->dqs_config = 0;
+#elif defined(CONFIG_SYS_FSL_DDR2) || defined(CONFIG_SYS_FSL_DDR3)
+	popts->dqs_config = 1;
+#endif
+
+	/* Choose self-refresh during sleep. */
+	popts->self_refresh_in_sleep = 1;
+
+	/* Choose dynamic power management mode. */
+	popts->dynamic_power = 0;
+
+	/*
+	 * check first dimm for primary sdram width
+	 * presuming all dimms are similar
+	 * 0 = 64-bit, 1 = 32-bit, 2 = 16-bit
+	 */
+#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2)
+	if (pdimm[0].n_ranks != 0) {
+		if ((pdimm[0].data_width >= 64) && \
+			(pdimm[0].data_width <= 72))
+			popts->data_bus_width = 0;
+		else if ((pdimm[0].data_width >= 32) || \
+			(pdimm[0].data_width <= 40))
+			popts->data_bus_width = 1;
+		else {
+			panic("Error: data width %u is invalid!\n",
+				pdimm[0].data_width);
+		}
+	}
+#else
+	if (pdimm[0].n_ranks != 0) {
+		if (pdimm[0].primary_sdram_width == 64)
+			popts->data_bus_width = 0;
+		else if (pdimm[0].primary_sdram_width == 32)
+			popts->data_bus_width = 1;
+		else if (pdimm[0].primary_sdram_width == 16)
+			popts->data_bus_width = 2;
+		else {
+			panic("Error: primary sdram width %u is invalid!\n",
+				pdimm[0].primary_sdram_width);
+		}
+	}
+#endif
+
+	popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0;
+
+	/* Choose burst length. */
+#if defined(CONFIG_SYS_FSL_DDR3)
+#if defined(CONFIG_E500MC)
+	popts->otf_burst_chop_en = 0;	/* on-the-fly burst chop disable */
+	popts->burst_length = DDR_BL8;	/* Fixed 8-beat burst len */
+#else
+	if ((popts->data_bus_width == 1) || (popts->data_bus_width == 2)) {
+		/* 32-bit or 16-bit bus */
+		popts->otf_burst_chop_en = 0;
+		popts->burst_length = DDR_BL8;
+	} else {
+		popts->otf_burst_chop_en = 1;	/* on-the-fly burst chop */
+		popts->burst_length = DDR_OTF;	/* on-the-fly BC4 and BL8 */
+	}
+#endif
+#else
+	popts->burst_length = DDR_BL4;	/* has to be 4 for DDR2 */
+#endif
+
+	/* Choose ddr controller address mirror mode */
+#if defined(CONFIG_SYS_FSL_DDR3)
+	popts->mirrored_dimm = pdimm[0].mirrored_dimm;
+#endif
+
+	/* Global Timing Parameters. */
+	debug("mclk_ps = %u ps\n", get_memory_clk_period_ps());
+
+	/* Pick a caslat override. */
+	popts->cas_latency_override = 0;
+	popts->cas_latency_override_value = 3;
+	if (popts->cas_latency_override) {
+		debug("using caslat override value = %u\n",
+		       popts->cas_latency_override_value);
+	}
+
+	/* Decide whether to use the computed derated latency */
+	popts->use_derated_caslat = 0;
+
+	/* Choose an additive latency. */
+	popts->additive_latency_override = 0;
+	popts->additive_latency_override_value = 3;
+	if (popts->additive_latency_override) {
+		debug("using additive latency override value = %u\n",
+		       popts->additive_latency_override_value);
+	}
+
+	/*
+	 * 2T_EN setting
+	 *
+	 * Factors to consider for 2T_EN:
+	 *	- number of DIMMs installed
+	 *	- number of components, number of active ranks
+	 *	- how much time you want to spend playing around
+	 */
+	popts->twot_en = 0;
+	popts->threet_en = 0;
+
+	/* for RDIMM, address parity enable */
+	popts->ap_en = 1;
+
+	/*
+	 * BSTTOPRE precharge interval
+	 *
+	 * Set this to 0 for global auto precharge
+	 *
+	 * FIXME: Should this be configured in picoseconds?
+	 * Why it should be in ps:  better understanding of this
+	 * relative to actual DRAM timing parameters such as tRAS.
+	 * e.g. tRAS(min) = 40 ns
+	 */
+	popts->bstopre = 0x100;
+
+	/* Minimum CKE pulse width -- tCKE(MIN) */
+	popts->tcke_clock_pulse_width_ps
+		= mclk_to_picos(FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR);
+
+	/*
+	 * Window for four activates -- tFAW
+	 *
+	 * FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only
+	 * FIXME: varies depending upon number of column addresses or data
+	 * FIXME: width, was considering looking at pdimm->primary_sdram_width
+	 */
+#if defined(CONFIG_SYS_FSL_DDR1)
+	popts->tfaw_window_four_activates_ps = mclk_to_picos(1);
+
+#elif defined(CONFIG_SYS_FSL_DDR2)
+	/*
+	 * x4/x8;  some datasheets have 35000
+	 * x16 wide columns only?  Use 50000?
+	 */
+	popts->tfaw_window_four_activates_ps = 37500;
+
+#elif defined(CONFIG_SYS_FSL_DDR3)
+	popts->tfaw_window_four_activates_ps = pdimm[0].tfaw_ps;
+#endif
+	popts->zq_en = 0;
+	popts->wrlvl_en = 0;
+#if defined(CONFIG_SYS_FSL_DDR3)
+	/*
+	 * due to ddr3 dimm is fly-by topology
+	 * we suggest to enable write leveling to
+	 * meet the tQDSS under different loading.
+	 */
+	popts->wrlvl_en = 1;
+	popts->zq_en = 1;
+	popts->wrlvl_override = 0;
+#endif
+
+	/*
+	 * Check interleaving configuration from environment.
+	 * Please refer to doc/README.fsl-ddr for the detail.
+	 *
+	 * If memory controller interleaving is enabled, then the data
+	 * bus widths must be programmed identically for all memory controllers.
+	 *
+	 * XXX: Attempt to set all controllers to the same chip select
+	 * interleaving mode. It will do a best effort to get the
+	 * requested ranks interleaved together such that the result
+	 * should be a subset of the requested configuration.
+	 */
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+	if (!hwconfig_sub_f("fsl_ddr", "ctlr_intlv", buf))
+		goto done;
+
+	if (pdimm[0].n_ranks == 0) {
+		printf("There is no rank on CS0 for controller %d.\n", ctrl_num);
+		popts->memctl_interleaving = 0;
+		goto done;
+	}
+	popts->memctl_interleaving = 1;
+	/*
+	 * test null first. if CONFIG_HWCONFIG is not defined
+	 * hwconfig_arg_cmp returns non-zero
+	 */
+	if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
+				    "null", buf)) {
+		popts->memctl_interleaving = 0;
+		debug("memory controller interleaving disabled.\n");
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"cacheline", buf)) {
+		popts->memctl_interleaving_mode =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : FSL_DDR_CACHE_LINE_INTERLEAVING;
+		popts->memctl_interleaving =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : 1;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"page", buf)) {
+		popts->memctl_interleaving_mode =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : FSL_DDR_PAGE_INTERLEAVING;
+		popts->memctl_interleaving =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : 1;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"bank", buf)) {
+		popts->memctl_interleaving_mode =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : FSL_DDR_BANK_INTERLEAVING;
+		popts->memctl_interleaving =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : 1;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"superbank", buf)) {
+		popts->memctl_interleaving_mode =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : FSL_DDR_SUPERBANK_INTERLEAVING;
+		popts->memctl_interleaving =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : 1;
+#if (CONFIG_NUM_DDR_CONTROLLERS == 3)
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"3way_1KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_3WAY_1KB_INTERLEAVING;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"3way_4KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_3WAY_4KB_INTERLEAVING;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"3way_8KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_3WAY_8KB_INTERLEAVING;
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 4)
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"4way_1KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_4WAY_1KB_INTERLEAVING;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"4way_4KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_4WAY_4KB_INTERLEAVING;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"4way_8KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_4WAY_8KB_INTERLEAVING;
+#endif
+	} else {
+		popts->memctl_interleaving = 0;
+		printf("hwconfig has unrecognized parameter for ctlr_intlv.\n");
+	}
+done:
+#endif
+	if ((hwconfig_sub_f("fsl_ddr", "bank_intlv", buf)) &&
+		(CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
+		/* test null first. if CONFIG_HWCONFIG is not defined,
+		 * hwconfig_subarg_cmp_f returns non-zero */
+		if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+					    "null", buf))
+			debug("bank interleaving disabled.\n");
+		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+						 "cs0_cs1", buf))
+			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
+		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+						 "cs2_cs3", buf))
+			popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
+		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+						 "cs0_cs1_and_cs2_cs3", buf))
+			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
+		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+						 "cs0_cs1_cs2_cs3", buf))
+			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
+		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+						"auto", buf))
+			popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
+		else
+			printf("hwconfig has unrecognized parameter for bank_intlv.\n");
+		switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
+		case FSL_DDR_CS0_CS1_CS2_CS3:
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+			if (pdimm[0].n_ranks < 4) {
+				popts->ba_intlv_ctl = 0;
+				printf("Not enough bank(chip-select) for "
+					"CS0+CS1+CS2+CS3 on controller %d, "
+					"interleaving disabled!\n", ctrl_num);
+			}
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+			if (pdimm[0].n_ranks == 4)
+				break;
+#endif
+			if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
+				popts->ba_intlv_ctl = 0;
+				printf("Not enough bank(chip-select) for "
+					"CS0+CS1+CS2+CS3 on controller %d, "
+					"interleaving disabled!\n", ctrl_num);
+			}
+			if (pdimm[0].capacity != pdimm[1].capacity) {
+				popts->ba_intlv_ctl = 0;
+				printf("Not identical DIMM size for "
+					"CS0+CS1+CS2+CS3 on controller %d, "
+					"interleaving disabled!\n", ctrl_num);
+			}
+#endif
+			break;
+		case FSL_DDR_CS0_CS1:
+			if (pdimm[0].n_ranks < 2) {
+				popts->ba_intlv_ctl = 0;
+				printf("Not enough bank(chip-select) for "
+					"CS0+CS1 on controller %d, "
+					"interleaving disabled!\n", ctrl_num);
+			}
+			break;
+		case FSL_DDR_CS2_CS3:
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+			if (pdimm[0].n_ranks < 4) {
+				popts->ba_intlv_ctl = 0;
+				printf("Not enough bank(chip-select) for CS2+CS3 "
+					"on controller %d, interleaving disabled!\n", ctrl_num);
+			}
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+			if (pdimm[1].n_ranks < 2) {
+				popts->ba_intlv_ctl = 0;
+				printf("Not enough bank(chip-select) for CS2+CS3 "
+					"on controller %d, interleaving disabled!\n", ctrl_num);
+			}
+#endif
+			break;
+		case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+			if (pdimm[0].n_ranks < 4) {
+				popts->ba_intlv_ctl = 0;
+				printf("Not enough bank(CS) for CS0+CS1 and "
+					"CS2+CS3 on controller %d, "
+					"interleaving disabled!\n", ctrl_num);
+			}
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+			if ((pdimm[0].n_ranks < 2) || (pdimm[1].n_ranks < 2)) {
+				popts->ba_intlv_ctl = 0;
+				printf("Not enough bank(CS) for CS0+CS1 and "
+					"CS2+CS3 on controller %d, "
+					"interleaving disabled!\n", ctrl_num);
+			}
+#endif
+			break;
+		default:
+			popts->ba_intlv_ctl = 0;
+			break;
+		}
+	}
+
+	if (hwconfig_sub_f("fsl_ddr", "addr_hash", buf)) {
+		if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash", "null", buf))
+			popts->addr_hash = 0;
+		else if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash",
+					       "true", buf))
+			popts->addr_hash = 1;
+	}
+
+	if (pdimm[0].n_ranks == 4)
+		popts->quad_rank_present = 1;
+
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	if (popts->registered_dimm_en) {
+		popts->rcw_override = 1;
+		popts->rcw_1 = 0x000a5a00;
+		if (ddr_freq <= 800)
+			popts->rcw_2 = 0x00000000;
+		else if (ddr_freq <= 1066)
+			popts->rcw_2 = 0x00100000;
+		else if (ddr_freq <= 1333)
+			popts->rcw_2 = 0x00200000;
+		else
+			popts->rcw_2 = 0x00300000;
+	}
+
+	fsl_ddr_board_options(popts, pdimm, ctrl_num);
+
+	return 0;
+}
+
+void check_interleaving_options(fsl_ddr_info_t *pinfo)
+{
+	int i, j, k, check_n_ranks, intlv_invalid = 0;
+	unsigned int check_intlv, check_n_row_addr, check_n_col_addr;
+	unsigned long long check_rank_density;
+	struct dimm_params_s *dimm;
+	/*
+	 * Check if all controllers are configured for memory
+	 * controller interleaving. Identical dimms are recommended. At least
+	 * the size, row and col address should be checked.
+	 */
+	j = 0;
+	check_n_ranks = pinfo->dimm_params[0][0].n_ranks;
+	check_rank_density = pinfo->dimm_params[0][0].rank_density;
+	check_n_row_addr =  pinfo->dimm_params[0][0].n_row_addr;
+	check_n_col_addr = pinfo->dimm_params[0][0].n_col_addr;
+	check_intlv = pinfo->memctl_opts[0].memctl_interleaving_mode;
+	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+		dimm = &pinfo->dimm_params[i][0];
+		if (!pinfo->memctl_opts[i].memctl_interleaving) {
+			continue;
+		} else if (((check_rank_density != dimm->rank_density) ||
+		     (check_n_ranks != dimm->n_ranks) ||
+		     (check_n_row_addr != dimm->n_row_addr) ||
+		     (check_n_col_addr != dimm->n_col_addr) ||
+		     (check_intlv !=
+			pinfo->memctl_opts[i].memctl_interleaving_mode))){
+			intlv_invalid = 1;
+			break;
+		} else {
+			j++;
+		}
+
+	}
+	if (intlv_invalid) {
+		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
+			pinfo->memctl_opts[i].memctl_interleaving = 0;
+		printf("Not all DIMMs are identical. "
+			"Memory controller interleaving disabled.\n");
+	} else {
+		switch (check_intlv) {
+		case FSL_DDR_CACHE_LINE_INTERLEAVING:
+		case FSL_DDR_PAGE_INTERLEAVING:
+		case FSL_DDR_BANK_INTERLEAVING:
+		case FSL_DDR_SUPERBANK_INTERLEAVING:
+			if (3 == CONFIG_NUM_DDR_CONTROLLERS)
+				k = 2;
+			else
+				k = CONFIG_NUM_DDR_CONTROLLERS;
+			break;
+		case FSL_DDR_3WAY_1KB_INTERLEAVING:
+		case FSL_DDR_3WAY_4KB_INTERLEAVING:
+		case FSL_DDR_3WAY_8KB_INTERLEAVING:
+		case FSL_DDR_4WAY_1KB_INTERLEAVING:
+		case FSL_DDR_4WAY_4KB_INTERLEAVING:
+		case FSL_DDR_4WAY_8KB_INTERLEAVING:
+		default:
+			k = CONFIG_NUM_DDR_CONTROLLERS;
+			break;
+		}
+		debug("%d of %d controllers are interleaving.\n", j, k);
+		if (j && (j != k)) {
+			for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
+				pinfo->memctl_opts[i].memctl_interleaving = 0;
+			printf("Not all controllers have compatible "
+				"interleaving mode. All disabled.\n");
+		}
+	}
+	debug("Checking interleaving options completed\n");
+}
+
+int fsl_use_spd(void)
+{
+	int use_spd = 0;
+
+#ifdef CONFIG_DDR_SPD
+	char buffer[HWCONFIG_BUFFER_SIZE];
+	char *buf = NULL;
+
+	/*
+	 * Extract hwconfig from environment since we have not properly setup
+	 * the environment but need it for ddr config params
+	 */
+	if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
+		buf = buffer;
+
+	/* if hwconfig is not enabled, or "sdram" is not defined, use spd */
+	if (hwconfig_sub_f("fsl_ddr", "sdram", buf)) {
+		if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram", "spd", buf))
+			use_spd = 1;
+		else if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram",
+					       "fixed", buf))
+			use_spd = 0;
+		else
+			use_spd = 1;
+	} else
+		use_spd = 1;
+#endif
+
+	return use_spd;
+}
diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c
new file mode 100644
index 0000000..0658261
--- /dev/null
+++ b/drivers/ddr/fsl/util.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#ifdef CONFIG_PPC
+#include <asm/fsl_law.h>
+#endif
+#include <div64.h>
+
+#include <fsl_ddr.h>
+#include <fsl_immap.h>
+#include <asm/io.h>
+
+/* To avoid 64-bit full-divides, we factor this here */
+#define ULL_2E12 2000000000000ULL
+#define UL_5POW12 244140625UL
+#define UL_2POW13 (1UL << 13)
+
+#define ULL_8FS 0xFFFFFFFFULL
+
+/*
+ * Round up mclk_ps to nearest 1 ps in memory controller code
+ * if the error is 0.5ps or more.
+ *
+ * If an imprecise data rate is too high due to rounding error
+ * propagation, compute a suitably rounded mclk_ps to compute
+ * a working memory controller configuration.
+ */
+unsigned int get_memory_clk_period_ps(void)
+{
+	unsigned int data_rate = get_ddr_freq(0);
+	unsigned int result;
+
+	/* Round to nearest 10ps, being careful about 64-bit multiply/divide */
+	unsigned long long rem, mclk_ps = ULL_2E12;
+
+	/* Now perform the big divide, the result fits in 32-bits */
+	rem = do_div(mclk_ps, data_rate);
+	result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps;
+
+	return result;
+}
+
+/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
+unsigned int picos_to_mclk(unsigned int picos)
+{
+	unsigned long long clks, clks_rem;
+	unsigned long data_rate = get_ddr_freq(0);
+
+	/* Short circuit for zero picos */
+	if (!picos)
+		return 0;
+
+	/* First multiply the time by the data rate (32x32 => 64) */
+	clks = picos * (unsigned long long)data_rate;
+	/*
+	 * Now divide by 5^12 and track the 32-bit remainder, then divide
+	 * by 2*(2^12) using shifts (and updating the remainder).
+	 */
+	clks_rem = do_div(clks, UL_5POW12);
+	clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12;
+	clks >>= 13;
+
+	/* If we had a remainder greater than the 1ps error, then round up */
+	if (clks_rem > data_rate)
+		clks++;
+
+	/* Clamp to the maximum representable value */
+	if (clks > ULL_8FS)
+		clks = ULL_8FS;
+	return (unsigned int) clks;
+}
+
+unsigned int mclk_to_picos(unsigned int mclk)
+{
+	return get_memory_clk_period_ps() * mclk;
+}
+
+#ifdef CONFIG_PPC
+void
+__fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
+			   unsigned int law_memctl,
+			   unsigned int ctrl_num)
+{
+	unsigned long long base = memctl_common_params->base_address;
+	unsigned long long size = memctl_common_params->total_mem;
+
+	/*
+	 * If no DIMMs on this controller, do not proceed any further.
+	 */
+	if (!memctl_common_params->ndimms_present) {
+		return;
+	}
+
+#if !defined(CONFIG_PHYS_64BIT)
+	if (base >= CONFIG_MAX_MEM_MAPPED)
+		return;
+	if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
+		size = CONFIG_MAX_MEM_MAPPED - base;
+#endif
+	if (set_ddr_laws(base, size, law_memctl) < 0) {
+		printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
+			law_memctl);
+		return ;
+	}
+	debug("setup ddr law base = 0x%llx, size 0x%llx, TRGT_ID 0x%x\n",
+		base, size, law_memctl);
+}
+
+__attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
+fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
+			 unsigned int memctl_interleaved,
+			 unsigned int ctrl_num);
+#endif
+
+void fsl_ddr_set_intl3r(const unsigned int granule_size)
+{
+#ifdef CONFIG_E6500
+	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
+	*mcintl3r = 0x80000000 | (granule_size & 0x1f);
+	debug("Enable MCINTL3R with granule size 0x%x\n", granule_size);
+#endif
+}
+
+u32 fsl_ddr_get_intl3r(void)
+{
+	u32 val = 0;
+#ifdef CONFIG_E6500
+	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
+	val = *mcintl3r;
+#endif
+	return val;
+}
+
+void board_add_ram_info(int use_default)
+{
+	struct ccsr_ddr __iomem *ddr =
+		(struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);
+
+#if	defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3)
+	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
+#endif
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+	uint32_t cs0_config = in_be32(&ddr->cs0_config);
+#endif
+	uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg);
+	int cas_lat;
+
+#if CONFIG_NUM_DDR_CONTROLLERS >= 2
+	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+		ddr = (void __iomem *)CONFIG_SYS_FSL_DDR2_ADDR;
+		sdram_cfg = in_be32(&ddr->sdram_cfg);
+	}
+#endif
+#if CONFIG_NUM_DDR_CONTROLLERS >= 3
+	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+		ddr = (void __iomem *)CONFIG_SYS_FSL_DDR3_ADDR;
+		sdram_cfg = in_be32(&ddr->sdram_cfg);
+	}
+#endif
+	puts(" (DDR");
+	switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
+		SDRAM_CFG_SDRAM_TYPE_SHIFT) {
+	case SDRAM_TYPE_DDR1:
+		puts("1");
+		break;
+	case SDRAM_TYPE_DDR2:
+		puts("2");
+		break;
+	case SDRAM_TYPE_DDR3:
+		puts("3");
+		break;
+	default:
+		puts("?");
+		break;
+	}
+
+	if (sdram_cfg & SDRAM_CFG_32_BE)
+		puts(", 32-bit");
+	else if (sdram_cfg & SDRAM_CFG_16_BE)
+		puts(", 16-bit");
+	else
+		puts(", 64-bit");
+
+	/* Calculate CAS latency based on timing cfg values */
+	cas_lat = ((in_be32(&ddr->timing_cfg_1) >> 16) & 0xf) + 1;
+	if ((in_be32(&ddr->timing_cfg_3) >> 12) & 1)
+		cas_lat += (8 << 1);
+	printf(", CL=%d", cas_lat >> 1);
+	if (cas_lat & 0x1)
+		puts(".5");
+
+	if (sdram_cfg & SDRAM_CFG_ECC_EN)
+		puts(", ECC on)");
+	else
+		puts(", ECC off)");
+
+#if (CONFIG_NUM_DDR_CONTROLLERS == 3)
+#ifdef CONFIG_E6500
+	if (*mcintl3r & 0x80000000) {
+		puts("\n");
+		puts("       DDR Controller Interleaving Mode: ");
+		switch (*mcintl3r & 0x1f) {
+		case FSL_DDR_3WAY_1KB_INTERLEAVING:
+			puts("3-way 1KB");
+			break;
+		case FSL_DDR_3WAY_4KB_INTERLEAVING:
+			puts("3-way 4KB");
+			break;
+		case FSL_DDR_3WAY_8KB_INTERLEAVING:
+			puts("3-way 8KB");
+			break;
+		default:
+			puts("3-way UNKNOWN");
+			break;
+		}
+	}
+#endif
+#endif
+#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
+	if (cs0_config & 0x20000000) {
+		puts("\n");
+		puts("       DDR Controller Interleaving Mode: ");
+
+		switch ((cs0_config >> 24) & 0xf) {
+		case FSL_DDR_CACHE_LINE_INTERLEAVING:
+			puts("cache line");
+			break;
+		case FSL_DDR_PAGE_INTERLEAVING:
+			puts("page");
+			break;
+		case FSL_DDR_BANK_INTERLEAVING:
+			puts("bank");
+			break;
+		case FSL_DDR_SUPERBANK_INTERLEAVING:
+			puts("super-bank");
+			break;
+		default:
+			puts("invalid");
+			break;
+		}
+	}
+#endif
+
+	if ((sdram_cfg >> 8) & 0x7f) {
+		puts("\n");
+		puts("       DDR Chip-Select Interleaving Mode: ");
+		switch(sdram_cfg >> 8 & 0x7f) {
+		case FSL_DDR_CS0_CS1_CS2_CS3:
+			puts("CS0+CS1+CS2+CS3");
+			break;
+		case FSL_DDR_CS0_CS1:
+			puts("CS0+CS1");
+			break;
+		case FSL_DDR_CS2_CS3:
+			puts("CS2+CS3");
+			break;
+		case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+			puts("CS0+CS1 and CS2+CS3");
+			break;
+		default:
+			puts("invalid");
+			break;
+		}
+	}
+}
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 4fcdf40..dfb2e7f 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -5,7 +5,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-ifdef CONFIG_FPGA
 obj-y += fpga.o
 obj-$(CONFIG_FPGA_SPARTAN2) += spartan2.o
 obj-$(CONFIG_FPGA_SPARTAN3) += spartan3.o
@@ -19,4 +18,3 @@ obj-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
 obj-$(CONFIG_FPGA_CYCLON2) += cyclon2.o
 obj-$(CONFIG_FPGA_STRATIX_II) += stratixII.o
 endif
-endif
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 5280bb3..553b519 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -11,21 +11,20 @@ obj-$(CONFIG_DW_I2C) += designware_i2c.o
 obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
 obj-$(CONFIG_I2C_MV) += mv_i2c.o
 obj-$(CONFIG_I2C_MXS) += mxs_i2c.o
-obj-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
-obj-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
-obj-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
 obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
 obj-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
 obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
 obj-$(CONFIG_U8500_I2C) += u8500_i2c.o
-obj-$(CONFIG_SH_I2C) += sh_i2c.o
 obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
 obj-$(CONFIG_SYS_I2C) += i2c_core.o
 obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
 obj-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
 obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
+obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
+obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
 obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
 obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
+obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
 obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
 obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
-obj-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o
+obj-$(CONFIG_SYS_I2C_ZYNQ) += zynq_i2c.o
diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c
index c2f0662..cb2ac04 100644
--- a/drivers/i2c/designware_i2c.c
+++ b/drivers/i2c/designware_i2c.c
@@ -151,7 +151,19 @@ void i2c_init(int speed, int slaveadd)
  */
 static void i2c_setaddress(unsigned int i2c_addr)
 {
+	unsigned int enbl;
+
+	/* Disable i2c */
+	enbl = readl(&i2c_regs_p->ic_enable);
+	enbl &= ~IC_ENABLE_0B;
+	writel(enbl, &i2c_regs_p->ic_enable);
+
 	writel(i2c_addr, &i2c_regs_p->ic_tar);
+
+	/* Enable i2c */
+	enbl = readl(&i2c_regs_p->ic_enable);
+	enbl |= IC_ENABLE_0B;
+	writel(enbl, &i2c_regs_p->ic_enable);
 }
 
 /*
@@ -237,9 +249,6 @@ static int i2c_xfer_finish(void)
 
 	i2c_flush_rxfifo();
 
-	/* Wait for read/write operation to complete on actual memory */
-	udelay(10000);
-
 	return 0;
 }
 
diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c
index 46106b7..a298c95 100644
--- a/drivers/i2c/mxs_i2c.c
+++ b/drivers/i2c/mxs_i2c.c
@@ -150,6 +150,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
 	struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE;
 	uint32_t tmp = 0;
+	int timeout = MXS_I2C_MAX_TIMEOUT;
 	int ret;
 	int i;
 
@@ -169,9 +170,17 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 	for (i = 0; i < len; i++) {
 		if (!(i & 3)) {
-			while (readl(&i2c_regs->hw_i2c_queuestat) &
-				I2C_QUEUESTAT_RD_QUEUE_EMPTY)
-				;
+			while (--timeout) {
+				tmp = readl(&i2c_regs->hw_i2c_queuestat);
+				if (!(tmp & I2C_QUEUESTAT_RD_QUEUE_EMPTY))
+					break;
+			}
+
+			if (!timeout) {
+				debug("MXS I2C: Failed receiving data!\n");
+				return -ETIMEDOUT;
+			}
+
 			tmp = readl(&i2c_regs->hw_i2c_queuedata);
 		}
 		buffer[i] = tmp & 0xff;
diff --git a/drivers/i2c/omap1510_i2c.c b/drivers/i2c/omap1510_i2c.c
deleted file mode 100644
index f91ee88..0000000
--- a/drivers/i2c/omap1510_i2c.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * Basic I2C functions
- *
- * Copyright (c) 2003 Texas Instruments
- *
- * This package is free software;  you can redistribute it and/or
- * modify it under the terms of the license found in the file
- * named COPYING that should have accompanied this file.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Author: Jian Zhang jzhang@ti.com, Texas Instruments
- *
- * Copyright (c) 2003 Wolfgang Denk, wd@denx.de
- * Rewritten to fit into the current U-Boot framework
- *
- */
-
-#include <common.h>
-
-static void wait_for_bb (void);
-static u16 wait_for_pin (void);
-
-void i2c_init (int speed, int slaveadd)
-{
-	u16 scl;
-
-	if (inw (I2C_CON) & I2C_CON_EN) {
-		outw (0, I2C_CON);
-		udelay (5000);
-	}
-
-	/* 12MHz I2C module clock */
-	outw (0, I2C_PSC);
-	outw (I2C_CON_EN, I2C_CON);
-	outw (0, I2C_SYSTEST);
-	/* have to enable intrrupts or OMAP i2c module doesn't work */
-	outw (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
-	      I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE);
-	scl = (12000000 / 2) / speed - 6;
-	outw (scl, I2C_SCLL);
-	outw (scl, I2C_SCLH);
-	/* own address */
-	outw (slaveadd, I2C_OA);
-	outw (0, I2C_CNT);
-	udelay (1000);
-}
-
-static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
-{
-	int i2c_error = 0;
-	u16 status;
-
-	/* wait until bus not busy */
-	wait_for_bb ();
-
-	/* one byte only */
-	outw (1, I2C_CNT);
-	/* set slave address */
-	outw (devaddr, I2C_SA);
-	/* no stop bit needed here */
-	outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON);
-
-	status = wait_for_pin ();
-
-	if (status & I2C_STAT_XRDY) {
-		/* Important: have to use byte access */
-		*(volatile u8 *) (I2C_DATA) = regoffset;
-		udelay (20000);
-		if (inw (I2C_STAT) & I2C_STAT_NACK) {
-			i2c_error = 1;
-		}
-	} else {
-		i2c_error = 1;
-	}
-
-	if (!i2c_error) {
-		/* free bus, otherwise we can't use a combined transction */
-		outw (0, I2C_CON);
-		while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) {
-			udelay (10000);
-			/* Have to clear pending interrupt to clear I2C_STAT */
-			inw (I2C_IV);
-		}
-
-		wait_for_bb ();
-		/* set slave address */
-		outw (devaddr, I2C_SA);
-		/* read one byte from slave */
-		outw (1, I2C_CNT);
-		/* need stop bit here */
-		outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
-		      I2C_CON);
-
-		status = wait_for_pin ();
-		if (status & I2C_STAT_RRDY) {
-			*value = inw (I2C_DATA);
-			udelay (20000);
-		} else {
-			i2c_error = 1;
-		}
-
-		if (!i2c_error) {
-			outw (I2C_CON_EN, I2C_CON);
-			while (inw (I2C_STAT)
-			       || (inw (I2C_CON) & I2C_CON_MST)) {
-				udelay (10000);
-				inw (I2C_IV);
-			}
-		}
-	}
-
-	return i2c_error;
-}
-
-static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
-{
-	int i2c_error = 0;
-	u16 status;
-
-	/* wait until bus not busy */
-	wait_for_bb ();
-
-	/* two bytes */
-	outw (2, I2C_CNT);
-	/* set slave address */
-	outw (devaddr, I2C_SA);
-	/* stop bit needed here */
-	outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
-	      I2C_CON_STP, I2C_CON);
-
-	/* wait until state change */
-	status = wait_for_pin ();
-
-	if (status & I2C_STAT_XRDY) {
-		/* send out two bytes */
-		outw ((value << 8) + regoffset, I2C_DATA);
-		/* must have enough delay to allow BB bit to go low */
-		udelay (30000);
-		if (inw (I2C_STAT) & I2C_STAT_NACK) {
-			i2c_error = 1;
-		}
-	} else {
-		i2c_error = 1;
-	}
-
-	if (!i2c_error) {
-		outw (I2C_CON_EN, I2C_CON);
-		while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) {
-			udelay (1000);
-			/* have to read to clear intrrupt */
-			inw (I2C_IV);
-		}
-	}
-
-	return i2c_error;
-}
-
-int i2c_probe (uchar chip)
-{
-	int res = 1;
-
-	if (chip == inw (I2C_OA)) {
-		return res;
-	}
-
-	/* wait until bus not busy */
-	wait_for_bb ();
-
-	/* try to read one byte */
-	outw (1, I2C_CNT);
-	/* set slave address */
-	outw (chip, I2C_SA);
-	/* stop bit needed here */
-	outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON);
-	/* enough delay for the NACK bit set */
-	udelay (2000);
-	if (!(inw (I2C_STAT) & I2C_STAT_NACK)) {
-		res = 0;
-	} else {
-		outw (inw (I2C_CON) | I2C_CON_STP, I2C_CON);
-		udelay (20);
-		wait_for_bb ();
-	}
-
-	return res;
-}
-
-int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-	int i;
-
-	if (alen > 1) {
-		printf ("I2C read: addr len %d not supported\n", alen);
-		return 1;
-	}
-
-	if (addr + len > 256) {
-		printf ("I2C read: address out of range\n");
-		return 1;
-	}
-
-	for (i = 0; i < len; i++) {
-		if (i2c_read_byte (chip, addr + i, &buffer[i])) {
-			printf ("I2C read: I/O error\n");
-			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-	int i;
-
-	if (alen > 1) {
-		printf ("I2C read: addr len %d not supported\n", alen);
-		return 1;
-	}
-
-	if (addr + len > 256) {
-		printf ("I2C read: address out of range\n");
-		return 1;
-	}
-
-	for (i = 0; i < len; i++) {
-		if (i2c_write_byte (chip, addr + i, buffer[i])) {
-			printf ("I2C read: I/O error\n");
-			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static void wait_for_bb (void)
-{
-	int timeout = 10;
-
-	while ((inw (I2C_STAT) & I2C_STAT_BB) && timeout--) {
-		inw (I2C_IV);
-		udelay (1000);
-	}
-
-	if (timeout <= 0) {
-		printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
-			inw (I2C_STAT));
-	}
-}
-
-static u16 wait_for_pin (void)
-{
-	u16 status, iv;
-	int timeout = 10;
-
-	do {
-		udelay (1000);
-		status = inw (I2C_STAT);
-		iv = inw (I2C_IV);
-	} while (!iv &&
-		 !(status &
-		   (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
-		    I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
-		    I2C_STAT_AL)) && timeout--);
-
-	if (timeout <= 0) {
-		printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
-			inw (I2C_STAT));
-	}
-
-	return status;
-}
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index ef38d71..3d38c03 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -35,6 +35,7 @@
  */
 
 #include <common.h>
+#include <i2c.h>
 
 #include <asm/arch/i2c.h>
 #include <asm/io.h>
@@ -48,22 +49,14 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Absolutely safe for status update at 100 kHz I2C: */
 #define I2C_WAIT	200
 
-static int wait_for_bb(void);
-static u16 wait_for_event(void);
-static void flush_fifo(void);
+static int wait_for_bb(struct i2c_adapter *adap);
+static struct i2c *omap24_get_base(struct i2c_adapter *adap);
+static u16 wait_for_event(struct i2c_adapter *adap);
+static void flush_fifo(struct i2c_adapter *adap);
 
-/*
- * For SPL boot some boards need i2c before SDRAM is initialised so force
- * variables to live in SRAM
- */
-static struct i2c __attribute__((section (".data"))) *i2c_base =
-					(struct i2c *)I2C_DEFAULT_BASE;
-static unsigned int __attribute__((section (".data"))) bus_initialized[I2C_BUS_MAX] =
-					{ [0 ... (I2C_BUS_MAX-1)] = 0 };
-static unsigned int __attribute__((section (".data"))) current_bus = 0;
-
-void i2c_init(int speed, int slaveadd)
+static void omap24_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	int psc, fsscll, fssclh;
 	int hsscll = 0, hssclh = 0;
 	u32 scll, sclh;
@@ -163,16 +156,15 @@ void i2c_init(int speed, int slaveadd)
 	       I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
 #endif
 	udelay(1000);
-	flush_fifo();
+	flush_fifo(adap);
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);
-
-	if (gd->flags & GD_FLG_RELOC)
-		bus_initialized[current_bus] = 1;
 }
 
-static void flush_fifo(void)
-{	u16 stat;
+static void flush_fifo(struct i2c_adapter *adap)
+{
+	struct i2c *i2c_base = omap24_get_base(adap);
+	u16 stat;
 
 	/* note: if you try and read data when its not there or ready
 	 * you get a bus error
@@ -192,8 +184,9 @@ static void flush_fifo(void)
  * i2c_probe: Use write access. Allows to identify addresses that are
  *            write-only (like the config register of dual-port EEPROMs)
  */
-int i2c_probe(uchar chip)
+static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	u16 status;
 	int res = 1; /* default = fail */
 
@@ -201,7 +194,7 @@ int i2c_probe(uchar chip)
 		return res;
 
 	/* Wait until bus is free */
-	if (wait_for_bb())
+	if (wait_for_bb(adap))
 		return res;
 
 	/* No data transfer, slave addr only */
@@ -212,7 +205,7 @@ int i2c_probe(uchar chip)
 	writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
 	       I2C_CON_STP, &i2c_base->con);
 
-	status = wait_for_event();
+	status = wait_for_event(adap);
 
 	if ((status & ~I2C_STAT_XRDY) == 0 || (status & I2C_STAT_AL)) {
 		/*
@@ -223,7 +216,7 @@ int i2c_probe(uchar chip)
 		 */
 		if (status == I2C_STAT_XRDY)
 			printf("i2c_probe: pads on bus %d probably not configured (status=0x%x)\n",
-			       current_bus, status);
+			       adap->hwadapnr, status);
 
 		goto pr_exit;
 	}
@@ -239,7 +232,7 @@ int i2c_probe(uchar chip)
 		       I2C_CON_STP, &i2c_base->con);		/* STP */
 	}
 pr_exit:
-	flush_fifo();
+	flush_fifo(adap);
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);
 	return res;
@@ -258,8 +251,10 @@ pr_exit:
  *           or that do not need a register address at all (such as some clock
  *           distributors).
  */
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+			   int alen, uchar *buffer, int len)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	int i2c_error = 0;
 	u16 status;
 
@@ -287,7 +282,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	}
 
 	/* Wait until bus not busy */
-	if (wait_for_bb())
+	if (wait_for_bb(adap))
 		return 1;
 
 	/* Zero, one or two bytes reg address (offset) */
@@ -308,12 +303,12 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 #endif
 		/* Send register offset */
 		while (1) {
-			status = wait_for_event();
+			status = wait_for_event(adap);
 			/* Try to identify bus that is not padconf'd for I2C */
 			if (status == I2C_STAT_XRDY) {
 				i2c_error = 2;
 				printf("i2c_read (addr phase): pads on bus %d probably not configured (status=0x%x)\n",
-				       current_bus, status);
+				       adap->hwadapnr, status);
 				goto rd_exit;
 			}
 			if (status == 0 || status & I2C_STAT_NACK) {
@@ -348,7 +343,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 	/* Receive data */
 	while (1) {
-		status = wait_for_event();
+		status = wait_for_event(adap);
 		/*
 		 * Try to identify bus that is not padconf'd for I2C. This
 		 * state could be left over from previous transactions if
@@ -357,7 +352,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 		if (status == I2C_STAT_XRDY) {
 			i2c_error = 2;
 			printf("i2c_read (data phase): pads on bus %d probably not configured (status=0x%x)\n",
-			       current_bus, status);
+			       adap->hwadapnr, status);
 			goto rd_exit;
 		}
 		if (status == 0 || status & I2C_STAT_NACK) {
@@ -375,15 +370,17 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	}
 
 rd_exit:
-	flush_fifo();
+	flush_fifo(adap);
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);
 	return i2c_error;
 }
 
 /* i2c_write: Address (reg offset) may be 0, 1 or 2 bytes long. */
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+			    int alen, uchar *buffer, int len)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	int i;
 	u16 status;
 	int i2c_error = 0;
@@ -415,7 +412,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	}
 
 	/* Wait until bus not busy */
-	if (wait_for_bb())
+	if (wait_for_bb(adap))
 		return 1;
 
 	/* Start address phase - will write regoffset + len bytes data */
@@ -428,12 +425,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 	while (alen) {
 		/* Must write reg offset (one or two bytes) */
-		status = wait_for_event();
+		status = wait_for_event(adap);
 		/* Try to identify bus that is not padconf'd for I2C */
 		if (status == I2C_STAT_XRDY) {
 			i2c_error = 2;
 			printf("i2c_write: pads on bus %d probably not configured (status=0x%x)\n",
-			       current_bus, status);
+			       adap->hwadapnr, status);
 			goto wr_exit;
 		}
 		if (status == 0 || status & I2C_STAT_NACK) {
@@ -455,7 +452,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	}
 	/* Address phase is over, now write data */
 	for (i = 0; i < len; i++) {
-		status = wait_for_event();
+		status = wait_for_event(adap);
 		if (status == 0 || status & I2C_STAT_NACK) {
 			i2c_error = 1;
 			printf("i2c_write: error waiting for data ACK (status=0x%x)\n",
@@ -474,7 +471,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	}
 
 wr_exit:
-	flush_fifo();
+	flush_fifo(adap);
 	writew(0xFFFF, &i2c_base->stat);
 	writew(0, &i2c_base->cnt);
 	return i2c_error;
@@ -484,8 +481,9 @@ wr_exit:
  * Wait for the bus to be free by checking the Bus Busy (BB)
  * bit to become clear
  */
-static int wait_for_bb(void)
+static int wait_for_bb(struct i2c_adapter *adap)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	int timeout = I2C_TIMEOUT;
 	u16 stat;
 
@@ -514,8 +512,9 @@ static int wait_for_bb(void)
  * Wait for the I2C controller to complete current action
  * and update status
  */
-static u16 wait_for_event(void)
+static u16 wait_for_event(struct i2c_adapter *adap)
 {
+	struct i2c *i2c_base = omap24_get_base(adap);
 	u16 status;
 	int timeout = I2C_TIMEOUT;
 
@@ -540,7 +539,7 @@ static u16 wait_for_event(void)
 		 * not been configured for I2C, and/or pull-ups are missing.
 		 */
 		printf("Check if pads/pull-ups of bus %d are properly configured\n",
-		       current_bus);
+		       adap->hwadapnr);
 		writew(0xFFFF, &i2c_base->stat);
 		status = 0;
 	}
@@ -548,48 +547,93 @@ static u16 wait_for_event(void)
 	return status;
 }
 
-int i2c_set_bus_num(unsigned int bus)
+static struct i2c *omap24_get_base(struct i2c_adapter *adap)
 {
-	if (bus >= I2C_BUS_MAX) {
-		printf("Bad bus: %x\n", bus);
-		return -1;
-	}
-
-	switch (bus) {
-	default:
-		bus = 0;	/* Fall through */
+	switch (adap->hwadapnr) {
 	case 0:
-		i2c_base = (struct i2c *)I2C_BASE1;
+		return (struct i2c *)I2C_BASE1;
 		break;
 	case 1:
-		i2c_base = (struct i2c *)I2C_BASE2;
+		return (struct i2c *)I2C_BASE2;
 		break;
 #if (I2C_BUS_MAX > 2)
 	case 2:
-		i2c_base = (struct i2c *)I2C_BASE3;
+		return (struct i2c *)I2C_BASE3;
 		break;
 #if (I2C_BUS_MAX > 3)
 	case 3:
-		i2c_base = (struct i2c *)I2C_BASE4;
+		return (struct i2c *)I2C_BASE4;
 		break;
 #if (I2C_BUS_MAX > 4)
 	case 4:
-		i2c_base = (struct i2c *)I2C_BASE5;
+		return (struct i2c *)I2C_BASE5;
 		break;
 #endif
 #endif
 #endif
+	default:
+		printf("wrong hwadapnr: %d\n", adap->hwadapnr);
+		break;
 	}
+	return NULL;
+}
 
-	current_bus = bus;
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED1)
+#define CONFIG_SYS_OMAP24_I2C_SPEED1 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE1)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE1 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
 
-	if (!bus_initialized[current_bus])
-		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+U_BOOT_I2C_ADAP_COMPLETE(omap24_0, omap24_i2c_init, omap24_i2c_probe,
+			 omap24_i2c_read, omap24_i2c_write, NULL,
+			 CONFIG_SYS_OMAP24_I2C_SPEED,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE,
+			 0)
+U_BOOT_I2C_ADAP_COMPLETE(omap24_1, omap24_i2c_init, omap24_i2c_probe,
+			 omap24_i2c_read, omap24_i2c_write, NULL,
+			 CONFIG_SYS_OMAP24_I2C_SPEED1,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE1,
+			 1)
+#if (I2C_BUS_MAX > 2)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED2)
+#define CONFIG_SYS_OMAP24_I2C_SPEED2 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE2)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE2 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
 
-	return 0;
-}
+U_BOOT_I2C_ADAP_COMPLETE(omap24_2, omap24_i2c_init, omap24_i2c_probe,
+			 omap24_i2c_read, omap24_i2c_write, NULL,
+			 CONFIG_SYS_OMAP24_I2C_SPEED2,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE2,
+			 2)
+#if (I2C_BUS_MAX > 3)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED3)
+#define CONFIG_SYS_OMAP24_I2C_SPEED3 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE3)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE3 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
 
-int i2c_get_bus_num(void)
-{
-	return (int) current_bus;
-}
+U_BOOT_I2C_ADAP_COMPLETE(omap24_3, omap24_i2c_init, omap24_i2c_probe,
+			 omap24_i2c_read, omap24_i2c_write, NULL,
+			 CONFIG_SYS_OMAP24_I2C_SPEED3,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE3,
+			 3)
+#if (I2C_BUS_MAX > 4)
+#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED4)
+#define CONFIG_SYS_OMAP24_I2C_SPEED4 CONFIG_SYS_OMAP24_I2C_SPEED
+#endif
+#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE4)
+#define CONFIG_SYS_OMAP24_I2C_SLAVE4 CONFIG_SYS_OMAP24_I2C_SLAVE
+#endif
+
+U_BOOT_I2C_ADAP_COMPLETE(omap24_4, omap24_i2c_init, omap24_i2c_probe,
+			 omap24_i2c_read, omap24_i2c_write, NULL,
+			 CONFIG_SYS_OMAP24_I2C_SPEED4,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE4,
+			 4)
+#endif
+#endif
+#endif
diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c
index 808202c..cc19100 100644
--- a/drivers/i2c/sh_i2c.c
+++ b/drivers/i2c/sh_i2c.c
@@ -6,6 +6,7 @@
  */
 
 #include <common.h>
+#include <i2c.h>
 #include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -22,8 +23,6 @@ struct sh_i2c {
 };
 #undef ureg
 
-static struct sh_i2c *base;
-
 /* ICCR */
 #define SH_I2C_ICCR_ICE		(1 << 7)
 #define SH_I2C_ICCR_RACK	(1 << 6)
@@ -43,202 +42,165 @@ static struct sh_i2c *base;
 #define SH_I2C_ICIC_ICCHB8	(1 << 6)
 #endif
 
+static const struct sh_i2c *i2c_dev[CONFIG_SYS_I2C_SH_NUM_CONTROLLERS] = {
+	(struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE0,
+#ifdef CONFIG_SYS_I2C_SH_BASE1
+	(struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE1,
+#endif
+#ifdef CONFIG_SYS_I2C_SH_BASE2
+	(struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE2,
+#endif
+#ifdef CONFIG_SYS_I2C_SH_BASE3
+	(struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE3,
+#endif
+#ifdef CONFIG_SYS_I2C_SH_BASE4
+	(struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE4,
+#endif
+};
+
 static u16 iccl, icch;
 
 #define IRQ_WAIT 1000
 
-static void irq_dte(struct sh_i2c *base)
+static void sh_irq_dte(struct sh_i2c *dev)
 {
 	int i;
 
-	for (i = 0 ; i < IRQ_WAIT ; i++) {
-		if (SH_IC_DTE & readb(&base->icsr))
+	for (i = 0; i < IRQ_WAIT; i++) {
+		if (SH_IC_DTE & readb(&dev->icsr))
 			break;
 		udelay(10);
 	}
 }
 
-static int irq_dte_with_tack(struct sh_i2c *base)
+static int sh_irq_dte_with_tack(struct sh_i2c *dev)
 {
 	int i;
 
-	for (i = 0 ; i < IRQ_WAIT ; i++) {
-		if (SH_IC_DTE & readb(&base->icsr))
+	for (i = 0; i < IRQ_WAIT; i++) {
+		if (SH_IC_DTE & readb(&dev->icsr))
 			break;
-		if (SH_IC_TACK & readb(&base->icsr))
+		if (SH_IC_TACK & readb(&dev->icsr))
 			return -1;
 		udelay(10);
 	}
 	return 0;
 }
 
-static void irq_busy(struct sh_i2c *base)
+static void sh_irq_busy(struct sh_i2c *dev)
 {
 	int i;
 
-	for (i = 0 ; i < IRQ_WAIT ; i++) {
-		if (!(SH_IC_BUSY & readb(&base->icsr)))
+	for (i = 0; i < IRQ_WAIT; i++) {
+		if (!(SH_IC_BUSY & readb(&dev->icsr)))
 			break;
 		udelay(10);
 	}
 }
 
-static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop)
+static int sh_i2c_set_addr(struct sh_i2c *dev, u8 chip, u8 addr, int stop)
 {
 	u8 icic = SH_IC_TACK;
 
-	clrbits_8(&base->iccr, SH_I2C_ICCR_ICE);
-	setbits_8(&base->iccr, SH_I2C_ICCR_ICE);
+	debug("%s: chip: %x, addr: %x iccl: %x, icch %x\n",
+				__func__, chip, addr, iccl, icch);
+	clrbits_8(&dev->iccr, SH_I2C_ICCR_ICE);
+	setbits_8(&dev->iccr, SH_I2C_ICCR_ICE);
 
-	writeb(iccl & 0xff, &base->iccl);
-	writeb(icch & 0xff, &base->icch);
+	writeb(iccl & 0xff, &dev->iccl);
+	writeb(icch & 0xff, &dev->icch);
 #ifdef CONFIG_SH_I2C_8BIT
 	if (iccl > 0xff)
 		icic |= SH_I2C_ICIC_ICCLB8;
 	if (icch > 0xff)
 		icic |= SH_I2C_ICIC_ICCHB8;
 #endif
-	writeb(icic, &base->icic);
+	writeb(icic, &dev->icic);
 
-	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr);
-	irq_dte(base);
+	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &dev->iccr);
+	sh_irq_dte(dev);
 
-	clrbits_8(&base->icsr, SH_IC_TACK);
-	writeb(id << 1, &base->icdr);
-	if (irq_dte_with_tack(base) != 0)
+	clrbits_8(&dev->icsr, SH_IC_TACK);
+	writeb(chip << 1, &dev->icdr);
+	if (sh_irq_dte_with_tack(dev) != 0)
 		return -1;
 
-	writeb(reg, &base->icdr);
+	writeb(addr, &dev->icdr);
 	if (stop)
-		writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &base->iccr);
+		writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &dev->iccr);
 
-	if (irq_dte_with_tack(base) != 0)
+	if (sh_irq_dte_with_tack(dev) != 0)
 		return -1;
 	return 0;
 }
 
-static void i2c_finish(struct sh_i2c *base)
+static void sh_i2c_finish(struct sh_i2c *dev)
 {
-	writeb(0, &base->icsr);
-	clrbits_8(&base->iccr, SH_I2C_ICCR_ICE);
+	writeb(0, &dev->icsr);
+	clrbits_8(&dev->iccr, SH_I2C_ICCR_ICE);
 }
 
-static int i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val)
+static int
+sh_i2c_raw_write(struct sh_i2c *dev, u8 chip, uint addr, u8 val)
 {
 	int ret = -1;
-	if (i2c_set_addr(base, id, reg, 0) != 0)
+	if (sh_i2c_set_addr(dev, chip, addr, 0) != 0)
 		goto exit0;
 	udelay(10);
 
-	writeb(val, &base->icdr);
-	if (irq_dte_with_tack(base) != 0)
+	writeb(val, &dev->icdr);
+	if (sh_irq_dte_with_tack(dev) != 0)
 		goto exit0;
 
-	writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &base->iccr);
-	if (irq_dte_with_tack(base) != 0)
+	writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &dev->iccr);
+	if (sh_irq_dte_with_tack(dev) != 0)
 		goto exit0;
-	irq_busy(base);
+	sh_irq_busy(dev);
 	ret = 0;
+
 exit0:
-	i2c_finish(base);
+	sh_i2c_finish(dev);
 	return ret;
 }
 
-static int i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg)
+static int sh_i2c_raw_read(struct sh_i2c *dev, u8 chip, u8 addr)
 {
 	int ret = -1;
 
 #if defined(CONFIG_SH73A0)
-	if (i2c_set_addr(base, id, reg, 0) != 0)
+	if (sh_i2c_set_addr(dev, chip, addr, 0) != 0)
 		goto exit0;
 #else
-	if (i2c_set_addr(base, id, reg, 1) != 0)
+	if (sh_i2c_set_addr(dev, chip, addr, 1) != 0)
 		goto exit0;
 	udelay(100);
 #endif
 
-	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr);
-	irq_dte(base);
+	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &dev->iccr);
+	sh_irq_dte(dev);
 
-	writeb(id << 1 | 0x01, &base->icdr);
-	if (irq_dte_with_tack(base) != 0)
+	writeb(chip << 1 | 0x01, &dev->icdr);
+	if (sh_irq_dte_with_tack(dev) != 0)
 		goto exit0;
 
-	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &base->iccr);
-	if (irq_dte_with_tack(base) != 0)
+	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &dev->iccr);
+	if (sh_irq_dte_with_tack(dev) != 0)
 		goto exit0;
 
-	ret = readb(&base->icdr) & 0xff;
+	ret = readb(&dev->icdr) & 0xff;
+
+	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &dev->iccr);
+	readb(&dev->icdr); /* Dummy read */
+	sh_irq_busy(dev);
 
-	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &base->iccr);
-	readb(&base->icdr); /* Dummy read */
-	irq_busy(base);
 exit0:
-	i2c_finish(base);
+	sh_i2c_finish(dev);
 
 	return ret;
 }
 
-#ifdef CONFIG_I2C_MULTI_BUS
-static unsigned int current_bus;
-
-/**
- * i2c_set_bus_num - change active I2C bus
- *	@bus: bus index, zero based
- *	@returns: 0 on success, non-0 on failure
- */
-int i2c_set_bus_num(unsigned int bus)
-{
-	if ((bus < 0) || (bus >= CONFIG_SYS_MAX_I2C_BUS)) {
-		printf("Bad bus: %d\n", bus);
-		return -1;
-	}
-
-	switch (bus) {
-	case 0:
-		base = (void *)CONFIG_SH_I2C_BASE0;
-		break;
-	case 1:
-		base = (void *)CONFIG_SH_I2C_BASE1;
-		break;
-#ifdef CONFIG_SH_I2C_BASE2
-	case 2:
-		base = (void *)CONFIG_SH_I2C_BASE2;
-		break;
-#endif
-#ifdef CONFIG_SH_I2C_BASE3
-	case 3:
-		base = (void *)CONFIG_SH_I2C_BASE3;
-		break;
-#endif
-#ifdef CONFIG_SH_I2C_BASE4
-	case 4:
-		base = (void *)CONFIG_SH_I2C_BASE4;
-		break;
-#endif
-	default:
-		return -1;
-	}
-	current_bus = bus;
-
-	return 0;
-}
-
-/**
- * i2c_get_bus_num - returns index of active I2C bus
- */
-unsigned int i2c_get_bus_num(void)
-{
-	return current_bus;
-}
-#endif
-
-#define SH_I2C_ICCL_CALC(clk, date, t_low, t_high) \
-		((clk / rate) * (t_low / t_low + t_high))
-#define SH_I2C_ICCH_CALC(clk, date, t_low, t_high) \
-		((clk / rate) * (t_high / t_low + t_high))
-
-void i2c_init(int speed, int slaveaddr)
+static void
+sh_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 {
 	int num, denom, tmp;
 
@@ -246,11 +208,6 @@ void i2c_init(int speed, int slaveaddr)
 	if (!(gd->flags & GD_FLG_RELOC))
 		return;
 
-#ifdef CONFIG_I2C_MULTI_BUS
-	current_bus = 0;
-#endif
-	base = (struct sh_i2c *)CONFIG_SH_I2C_BASE0;
-
 	/*
 	 * Calculate the value for iccl. From the data sheet:
 	 * iccl = (p-clock / transfer-rate) * (L / (L + H))
@@ -272,67 +229,78 @@ void i2c_init(int speed, int slaveaddr)
 		icch = (u16)((num/denom) + 1);
 	else
 		icch = (u16)(num/denom);
+
+	debug("clock: %d, speed %d, iccl: %x, icch: %x\n",
+			CONFIG_SH_I2C_CLOCK, speed, iccl, icch);
 }
 
-/*
- * i2c_read: - Read multiple bytes from an i2c device
- *
- * The higher level routines take into account that this function is only
- * called with len < page length of the device (see configuration file)
- *
- * @chip:   address of the chip which is to be read
- * @addr:   i2c data address within the chip
- * @alen:   length of the i2c data address (1..2 bytes)
- * @buffer: where to write the data
- * @len:    how much byte do we want to read
- * @return: 0 in case of success
- */
-int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len)
+static int sh_i2c_read(struct i2c_adapter *adap, uint8_t chip,
+				uint addr, int alen, u8 *data, int len)
 {
-	int ret;
-	int i = 0;
-	for (i = 0 ; i < len ; i++) {
-		ret = i2c_raw_read(base, chip, addr + i);
+	int ret, i;
+	struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr];
+
+	for (i = 0; i < len; i++) {
+		ret = sh_i2c_raw_read(dev, chip, addr + i);
 		if (ret < 0)
 			return -1;
-		buffer[i] = ret & 0xff;
+
+		data[i] = ret & 0xff;
+		debug("%s: data[%d]: %02x\n", __func__, i, data[i]);
 	}
+
 	return 0;
 }
 
-/*
- * i2c_write: -  Write multiple bytes to an i2c device
- *
- * The higher level routines take into account that this function is only
- * called with len < page length of the device (see configuration file)
- *
- * @chip:   address of the chip which is to be written
- * @addr:   i2c data address within the chip
- * @alen:   length of the i2c data address (1..2 bytes)
- * @buffer: where to find the data to be written
- * @len:    how much byte do we want to read
- * @return: 0 in case of success
- */
-int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len)
+static int sh_i2c_write(struct i2c_adapter *adap, uint8_t chip, uint addr,
+				int alen, u8 *data, int len)
 {
-	int i = 0;
-	for (i = 0; i < len ; i++)
-		if (i2c_raw_write(base, chip, addr + i, buffer[i]) != 0)
+	struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr];
+	int i;
+
+	for (i = 0; i < len; i++) {
+		debug("%s: data[%d]: %02x\n", __func__, i, data[i]);
+		if (sh_i2c_raw_write(dev, chip, addr + i, data[i]) != 0)
 			return -1;
+	}
 	return 0;
 }
 
-/*
- * i2c_probe: - Test if a chip answers for a given i2c address
- *
- * @chip:   address of the chip which is searched for
- * @return: 0 if a chip was found, -1 otherwhise
- */
-int i2c_probe(u8 chip)
+static int
+sh_i2c_probe(struct i2c_adapter *adap, u8 dev)
 {
-	int ret;
+	return sh_i2c_read(adap, dev, 0, 0, NULL, 0);
+}
 
-	ret = i2c_set_addr(base, chip, 0, 1);
-	i2c_finish(base);
-	return ret;
+static unsigned int sh_i2c_set_bus_speed(struct i2c_adapter *adap,
+			unsigned int speed)
+{
+	struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr];
+
+	sh_i2c_finish(dev);
+	sh_i2c_init(adap, speed, 0);
+
+	return 0;
 }
+
+/*
+ * Register RCAR i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(sh_0, sh_i2c_init, sh_i2c_probe, sh_i2c_read,
+	sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED0, 0, 0)
+#ifdef CONFIG_SYS_I2C_SH_BASE1
+U_BOOT_I2C_ADAP_COMPLETE(sh_1, sh_i2c_init, sh_i2c_probe, sh_i2c_read,
+	sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED1, 0, 1)
+#endif
+#ifdef CONFIG_SYS_I2C_SH_BASE2
+U_BOOT_I2C_ADAP_COMPLETE(sh_2, sh_i2c_init, sh_i2c_probe, sh_i2c_read,
+	sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED2, 0, 2)
+#endif
+#ifdef CONFIG_SYS_I2C_SH_BASE3
+U_BOOT_I2C_ADAP_COMPLETE(sh_3, sh_i2c_init, sh_i2c_probe, sh_i2c_read,
+	sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED3, 0, 3)
+#endif
+#ifdef CONFIG_SYS_I2C_SH_BASE4
+U_BOOT_I2C_ADAP_COMPLETE(sh_4, sh_i2c_init, sh_i2c_probe, sh_i2c_read,
+	sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED4, 0, 4)
+#endif
diff --git a/drivers/i2c/zynq_i2c.c b/drivers/i2c/zynq_i2c.c
index ce2d23f..70a9aea 100644
--- a/drivers/i2c/zynq_i2c.c
+++ b/drivers/i2c/zynq_i2c.c
@@ -74,7 +74,8 @@ static struct zynq_i2c_registers *zynq_i2c =
 	(struct zynq_i2c_registers *)ZYNQ_I2C_BASE;
 
 /* I2C init called by cmd_i2c when doing 'i2c reset'. */
-void i2c_init(int requested_speed, int slaveadd)
+static void zynq_i2c_init(struct i2c_adapter *adap, int requested_speed,
+			  int slaveadd)
 {
 	/* 111MHz / ( (3 * 17) * 22 ) = ~100KHz */
 	writel((16 << ZYNQ_I2C_CONTROL_DIV_B_SHIFT) |
@@ -151,7 +152,7 @@ static u32 zynq_i2c_wait(u32 mask)
  * I2C probe called by cmd_i2c when doing 'i2c probe'.
  * Begin read, nak data byte, end.
  */
-int i2c_probe(u8 dev)
+static int zynq_i2c_probe(struct i2c_adapter *adap, u8 dev)
 {
 	/* Attempt to read a byte */
 	setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
@@ -170,7 +171,8 @@ int i2c_probe(u8 dev)
  * I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c
  * Begin write, send address byte(s), begin read, receive data bytes, end.
  */
-int i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+static int zynq_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
+			 int alen, u8 *data, int length)
 {
 	u32 status;
 	u32 i = 0;
@@ -235,7 +237,8 @@ int i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
  * I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c
  * Begin write, send address byte(s), send data bytes, end.
  */
-int i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+static int zynq_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
+			  int alen, u8 *data, int length)
 {
 	u8 *cur_data = data;
 
@@ -275,16 +278,16 @@ int i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
 	return 0;
 }
 
-int i2c_set_bus_num(unsigned int bus)
+static unsigned int zynq_i2c_set_bus_speed(struct i2c_adapter *adap,
+			unsigned int speed)
 {
-	/* Only support bus 0 */
-	if (bus > 0)
-		return -1;
-	return 0;
-}
+	if (speed != 1000000)
+		return -EINVAL;
 
-unsigned int i2c_get_bus_num(void)
-{
-	/* Only support bus 0 */
 	return 0;
 }
+
+U_BOOT_I2C_ADAP_COMPLETE(zynq_0, zynq_i2c_init, zynq_i2c_probe, zynq_i2c_read,
+			 zynq_i2c_write, zynq_i2c_set_bus_speed,
+			 CONFIG_SYS_I2C_ZYNQ_SPEED, CONFIG_SYS_I2C_ZYNQ_SLAVE,
+			 0)
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d8ff9c6..c77e40a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_NS87308) += ns87308.o
 obj-$(CONFIG_PDSP188x) += pdsp188x.o
 obj-$(CONFIG_STATUS_LED) += status_led.o
 obj-$(CONFIG_TWL4030_LED) += twl4030_led.o
+obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
diff --git a/drivers/misc/fsl_ifc.c b/drivers/misc/fsl_ifc.c
new file mode 100644
index 0000000..be61973
--- /dev/null
+++ b/drivers/misc/fsl_ifc.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ifc.h>
+
+void print_ifc_regs(void)
+{
+	int i, j;
+
+	printf("IFC Controller Registers\n");
+	for (i = 0; i < CONFIG_SYS_FSL_IFC_BANK_COUNT; i++) {
+		printf("CSPR%d:0x%08X\tAMASK%d:0x%08X\tCSOR%d:0x%08X\n",
+			i, get_ifc_cspr(i), i, get_ifc_amask(i),
+			i, get_ifc_csor(i));
+		for (j = 0; j < 4; j++)
+			printf("IFC_FTIM%d:0x%08X\n", j, get_ifc_ftim(i, j));
+	}
+}
+
+void init_early_memctl_regs(void)
+{
+#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0)
+	set_ifc_ftim(IFC_CS0, IFC_FTIM0, CONFIG_SYS_CS0_FTIM0);
+	set_ifc_ftim(IFC_CS0, IFC_FTIM1, CONFIG_SYS_CS0_FTIM1);
+	set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2);
+	set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3);
+
+#ifndef CONFIG_A003399_NOR_WORKAROUND
+#ifdef CONFIG_SYS_CSPR0_EXT
+	set_ifc_cspr_ext(IFC_CS0, CONFIG_SYS_CSPR0_EXT);
+#endif
+#ifdef CONFIG_SYS_CSOR0_EXT
+	set_ifc_csor_ext(IFC_CS0, CONFIG_SYS_CSOR0_EXT);
+#endif
+	set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
+	set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
+	set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0);
+#endif
+#endif
+
+#ifdef CONFIG_SYS_CSPR1_EXT
+	set_ifc_cspr_ext(IFC_CS1, CONFIG_SYS_CSPR1_EXT);
+#endif
+#ifdef CONFIG_SYS_CSOR1_EXT
+	set_ifc_csor_ext(IFC_CS1, CONFIG_SYS_CSOR1_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1)
+	set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0);
+	set_ifc_ftim(IFC_CS1, IFC_FTIM1, CONFIG_SYS_CS1_FTIM1);
+	set_ifc_ftim(IFC_CS1, IFC_FTIM2, CONFIG_SYS_CS1_FTIM2);
+	set_ifc_ftim(IFC_CS1, IFC_FTIM3, CONFIG_SYS_CS1_FTIM3);
+
+	set_ifc_csor(IFC_CS1, CONFIG_SYS_CSOR1);
+	set_ifc_amask(IFC_CS1, CONFIG_SYS_AMASK1);
+	set_ifc_cspr(IFC_CS1, CONFIG_SYS_CSPR1);
+#endif
+
+#ifdef CONFIG_SYS_CSPR2_EXT
+	set_ifc_cspr_ext(IFC_CS2, CONFIG_SYS_CSPR2_EXT);
+#endif
+#ifdef CONFIG_SYS_CSOR2_EXT
+	set_ifc_csor_ext(IFC_CS2, CONFIG_SYS_CSOR2_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2)
+	set_ifc_ftim(IFC_CS2, IFC_FTIM0, CONFIG_SYS_CS2_FTIM0);
+	set_ifc_ftim(IFC_CS2, IFC_FTIM1, CONFIG_SYS_CS2_FTIM1);
+	set_ifc_ftim(IFC_CS2, IFC_FTIM2, CONFIG_SYS_CS2_FTIM2);
+	set_ifc_ftim(IFC_CS2, IFC_FTIM3, CONFIG_SYS_CS2_FTIM3);
+
+	set_ifc_csor(IFC_CS2, CONFIG_SYS_CSOR2);
+	set_ifc_amask(IFC_CS2, CONFIG_SYS_AMASK2);
+	set_ifc_cspr(IFC_CS2, CONFIG_SYS_CSPR2);
+#endif
+
+#ifdef CONFIG_SYS_CSPR3_EXT
+	set_ifc_cspr_ext(IFC_CS3, CONFIG_SYS_CSPR3_EXT);
+#endif
+#ifdef CONFIG_SYS_CSOR3_EXT
+	set_ifc_csor_ext(IFC_CS3, CONFIG_SYS_CSOR3_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3)
+	set_ifc_ftim(IFC_CS3, IFC_FTIM0, CONFIG_SYS_CS3_FTIM0);
+	set_ifc_ftim(IFC_CS3, IFC_FTIM1, CONFIG_SYS_CS3_FTIM1);
+	set_ifc_ftim(IFC_CS3, IFC_FTIM2, CONFIG_SYS_CS3_FTIM2);
+	set_ifc_ftim(IFC_CS3, IFC_FTIM3, CONFIG_SYS_CS3_FTIM3);
+
+	set_ifc_cspr(IFC_CS3, CONFIG_SYS_CSPR3);
+	set_ifc_amask(IFC_CS3, CONFIG_SYS_AMASK3);
+	set_ifc_csor(IFC_CS3, CONFIG_SYS_CSOR3);
+#endif
+
+#ifdef CONFIG_SYS_CSPR4_EXT
+	set_ifc_cspr_ext(IFC_CS4, CONFIG_SYS_CSPR4_EXT);
+#endif
+#ifdef CONFIG_SYS_CSOR4_EXT
+	set_ifc_csor_ext(IFC_CS4, CONFIG_SYS_CSOR4_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR4) && defined(CONFIG_SYS_CSOR4)
+	set_ifc_ftim(IFC_CS4, IFC_FTIM0, CONFIG_SYS_CS4_FTIM0);
+	set_ifc_ftim(IFC_CS4, IFC_FTIM1, CONFIG_SYS_CS4_FTIM1);
+	set_ifc_ftim(IFC_CS4, IFC_FTIM2, CONFIG_SYS_CS4_FTIM2);
+	set_ifc_ftim(IFC_CS4, IFC_FTIM3, CONFIG_SYS_CS4_FTIM3);
+
+	set_ifc_cspr(IFC_CS4, CONFIG_SYS_CSPR4);
+	set_ifc_amask(IFC_CS4, CONFIG_SYS_AMASK4);
+	set_ifc_csor(IFC_CS4, CONFIG_SYS_CSOR4);
+#endif
+
+#ifdef CONFIG_SYS_CSPR5_EXT
+	set_ifc_cspr_ext(IFC_CS5, CONFIG_SYS_CSPR5_EXT);
+#endif
+#ifdef CONFIG_SYS_CSOR5_EXT
+	set_ifc_csor_ext(IFC_CS5, CONFIG_SYS_CSOR5_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR5) && defined(CONFIG_SYS_CSOR5)
+	set_ifc_ftim(IFC_CS5, IFC_FTIM0, CONFIG_SYS_CS5_FTIM0);
+	set_ifc_ftim(IFC_CS5, IFC_FTIM1, CONFIG_SYS_CS5_FTIM1);
+	set_ifc_ftim(IFC_CS5, IFC_FTIM2, CONFIG_SYS_CS5_FTIM2);
+	set_ifc_ftim(IFC_CS5, IFC_FTIM3, CONFIG_SYS_CS5_FTIM3);
+
+	set_ifc_cspr(IFC_CS5, CONFIG_SYS_CSPR5);
+	set_ifc_amask(IFC_CS5, CONFIG_SYS_AMASK5);
+	set_ifc_csor(IFC_CS5, CONFIG_SYS_CSOR5);
+#endif
+
+#ifdef CONFIG_SYS_CSPR6_EXT
+	set_ifc_cspr_ext(IFC_CS6, CONFIG_SYS_CSPR6_EXT);
+#endif
+#ifdef CONFIG_SYS_CSOR6_EXT
+	set_ifc_csor_ext(IFC_CS6, CONFIG_SYS_CSOR6_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR6) && defined(CONFIG_SYS_CSOR6)
+	set_ifc_ftim(IFC_CS6, IFC_FTIM0, CONFIG_SYS_CS6_FTIM0);
+	set_ifc_ftim(IFC_CS6, IFC_FTIM1, CONFIG_SYS_CS6_FTIM1);
+	set_ifc_ftim(IFC_CS6, IFC_FTIM2, CONFIG_SYS_CS6_FTIM2);
+	set_ifc_ftim(IFC_CS6, IFC_FTIM3, CONFIG_SYS_CS6_FTIM3);
+
+	set_ifc_cspr(IFC_CS6, CONFIG_SYS_CSPR6);
+	set_ifc_amask(IFC_CS6, CONFIG_SYS_AMASK6);
+	set_ifc_csor(IFC_CS6, CONFIG_SYS_CSOR6);
+#endif
+
+#ifdef CONFIG_SYS_CSPR7_EXT
+	set_ifc_cspr_ext(IFC_CS7, CONFIG_SYS_CSPR7_EXT);
+#endif
+#ifdef CONFIG_SYS_CSOR7_EXT
+	set_ifc_csor_ext(IFC_CS7, CONFIG_SYS_CSOR7_EXT);
+#endif
+#if defined(CONFIG_SYS_CSPR7) && defined(CONFIG_SYS_CSOR7)
+	set_ifc_ftim(IFC_CS7, IFC_FTIM0, CONFIG_SYS_CS7_FTIM0);
+	set_ifc_ftim(IFC_CS7, IFC_FTIM1, CONFIG_SYS_CS7_FTIM1);
+	set_ifc_ftim(IFC_CS7, IFC_FTIM2, CONFIG_SYS_CS7_FTIM2);
+	set_ifc_ftim(IFC_CS7, IFC_FTIM3, CONFIG_SYS_CS7_FTIM3);
+
+	set_ifc_cspr(IFC_CS7, CONFIG_SYS_CSPR7);
+	set_ifc_amask(IFC_CS7, CONFIG_SYS_AMASK7);
+	set_ifc_csor(IFC_CS7, CONFIG_SYS_CSOR7);
+#endif
+}
diff --git a/drivers/misc/gpio_led.c b/drivers/misc/gpio_led.c
index 3fedddc..3e95727 100644
--- a/drivers/misc/gpio_led.c
+++ b/drivers/misc/gpio_led.c
@@ -9,15 +9,42 @@
 #include <status_led.h>
 #include <asm/gpio.h>
 
+#ifndef CONFIG_GPIO_LED_INVERTED_TABLE
+#define CONFIG_GPIO_LED_INVERTED_TABLE {}
+#endif
+
+static led_id_t gpio_led_inv[] = CONFIG_GPIO_LED_INVERTED_TABLE;
+
+static int gpio_led_gpio_value(led_id_t mask, int state)
+{
+	int i, gpio_value = (state == STATUS_LED_ON);
+
+	for (i = 0; i < ARRAY_SIZE(gpio_led_inv); i++) {
+		if (gpio_led_inv[i] == mask)
+			gpio_value = !gpio_value;
+	}
+
+	return gpio_value;
+}
+
 void __led_init(led_id_t mask, int state)
 {
-	gpio_request(mask, "gpio_led");
-	gpio_direction_output(mask, state == STATUS_LED_ON);
+	int gpio_value;
+
+	if (gpio_request(mask, "gpio_led") != 0) {
+		printf("%s: failed requesting GPIO%lu!\n", __func__, mask);
+		return;
+	}
+
+	gpio_value = gpio_led_gpio_value(mask, state);
+	gpio_direction_output(mask, gpio_value);
 }
 
 void __led_set(led_id_t mask, int state)
 {
-	gpio_set_value(mask, state == STATUS_LED_ON);
+	int gpio_value = gpio_led_gpio_value(mask, state);
+
+	gpio_set_value(mask, gpio_value);
 }
 
 void __led_toggle(led_id_t mask)
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index eb1eafa..e145cd1 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
 obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
 obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
 obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
+obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
 obj-$(CONFIG_NAND_PLAT) += nand_plat.o
 obj-$(CONFIG_NAND_DOCG4) += docg4.o
 
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 99fc86c..05ddfbb 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -411,7 +411,7 @@ static int pmecc_err_location(struct mtd_info *mtd)
 	}
 
 	if (!timeout) {
-		printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n");
+		dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n");
 		return -1;
 	}
 
@@ -451,7 +451,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
 			*(buf + byte_pos) ^= (1 << bit_pos);
 
 			pos = sector_num * host->pmecc_sector_size + byte_pos;
-			printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+			dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, *(buf + byte_pos));
 		} else {
 			/* Bit flip in OOB area */
@@ -461,7 +461,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
 			ecc[tmp] ^= (1 << bit_pos);
 
 			pos = tmp + nand_chip->ecc.layout->eccpos[0];
-			printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+			dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, ecc[tmp]);
 		}
 
@@ -499,7 +499,7 @@ normal_check:
 
 			err_nbr = pmecc_err_location(mtd);
 			if (err_nbr == -1) {
-				printk(KERN_ERR "PMECC: Too many errors\n");
+				dev_err(host->dev, "PMECC: Too many errors\n");
 				mtd->ecc_stats.failed++;
 				return -EIO;
 			} else {
@@ -543,7 +543,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
 	}
 
 	if (!timeout) {
-		printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n");
+		dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n");
 		return -1;
 	}
 
@@ -583,7 +583,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
 	}
 
 	if (!timeout) {
-		printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
+		dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
 		goto out;
 	}
 
@@ -826,6 +826,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
 	switch (mtd->writesize) {
 	case 2048:
 	case 4096:
+	case 8192:
 		host->pmecc_degree = (sector_size == 512) ?
 			PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
 		host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
@@ -839,8 +840,15 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
 		nand->ecc.steps = 1;
 		nand->ecc.bytes = host->pmecc_bytes_per_sector *
 				       host->pmecc_sector_number;
+
+		if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) {
+			dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n",
+					MTD_MAX_ECCPOS_ENTRIES_LARGE);
+			return -EINVAL;
+		}
+
 		if (nand->ecc.bytes > mtd->oobsize - 2) {
-			printk(KERN_ERR "No room for ECC bytes\n");
+			dev_err(host->dev, "No room for ECC bytes\n");
 			return -EINVAL;
 		}
 		pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
@@ -851,7 +859,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
 	case 512:
 	case 1024:
 		/* TODO */
-		printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n");
+		dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n");
 	default:
 		/* page size not handled by HW ECC */
 		/* switching back to soft ECC */
@@ -1034,7 +1042,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 		/* it doesn't seems to be a freshly
 		 * erased block.
 		 * We can't correct so many errors */
-		printk(KERN_WARNING "atmel_nand : multiple errors detected."
+		dev_warn(host->dev, "atmel_nand : multiple errors detected."
 				" Unable to correct.\n");
 		return -EIO;
 	}
@@ -1044,12 +1052,12 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 		/* there's nothing much to do here.
 		 * the bit error is on the ECC itself.
 		 */
-		printk(KERN_WARNING "atmel_nand : one bit error on ECC code."
+		dev_warn(host->dev, "atmel_nand : one bit error on ECC code."
 				" Nothing to correct\n");
 		return 0;
 	}
 
-	printk(KERN_WARNING "atmel_nand : one bit error on data."
+	dev_warn(host->dev, "atmel_nand : one bit error on data."
 			" (word offset in the page :"
 			" 0x%x bit offset : 0x%x)\n",
 			ecc_word, ecc_bit);
@@ -1061,7 +1069,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 		/* 8 bits words */
 		dat[ecc_word] ^= (1 << ecc_bit);
 	}
-	printk(KERN_WARNING "atmel_nand : error corrected\n");
+	dev_warn(host->dev, "atmel_nand : error corrected\n");
 	return 1;
 }
 
@@ -1176,7 +1184,11 @@ int atmel_nand_chip_init(int devnum, ulong base_addr)
 	mtd->priv = nand;
 	nand->IO_ADDR_R = nand->IO_ADDR_W = (void  __iomem *)base_addr;
 
+#ifdef CONFIG_NAND_ECC_BCH
+	nand->ecc.mode = NAND_ECC_SOFT_BCH;
+#else
 	nand->ecc.mode = NAND_ECC_SOFT;
+#endif
 #ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
@@ -1184,7 +1196,7 @@ int atmel_nand_chip_init(int devnum, ulong base_addr)
 #ifdef CONFIG_SYS_NAND_READY_PIN
 	nand->dev_ready = at91_nand_ready;
 #endif
-	nand->chip_delay = 20;
+	nand->chip_delay = 75;
 
 	ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL);
 	if (ret)
@@ -1212,6 +1224,6 @@ void board_nand_init(void)
 	int i;
 	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
 		if (atmel_nand_chip_init(i, base_addr[i]))
-			printk(KERN_ERR "atmel_nand: Fail to initialize #%d chip",
+			dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip",
 				i);
 }
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 98a09c0..1808a7f 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -17,7 +17,7 @@
 
 #include <asm/io.h>
 #include <asm/errno.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 
 #define FSL_IFC_V1_1_0	0x01010000
 #define MAX_BANKS	4
@@ -125,6 +125,69 @@ static struct nand_ecclayout oob_4096_ecc8 = {
 	.oobfree = { {2, 6}, {136, 82} },
 };
 
+/* 8192-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_8192_ecc4 = {
+	.eccbytes = 128,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63,
+		64, 65, 66, 67, 68, 69, 70, 71,
+		72, 73, 74, 75, 76, 77, 78, 79,
+		80, 81, 82, 83, 84, 85, 86, 87,
+		88, 89, 90, 91, 92, 93, 94, 95,
+		96, 97, 98, 99, 100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127,
+		128, 129, 130, 131, 132, 133, 134, 135,
+	},
+	.oobfree = { {2, 6}, {136, 208} },
+};
+
+/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_8192_ecc8 = {
+	.eccbytes = 256,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63,
+		64, 65, 66, 67, 68, 69, 70, 71,
+		72, 73, 74, 75, 76, 77, 78, 79,
+		80, 81, 82, 83, 84, 85, 86, 87,
+		88, 89, 90, 91, 92, 93, 94, 95,
+		96, 97, 98, 99, 100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127,
+		128, 129, 130, 131, 132, 133, 134, 135,
+		136, 137, 138, 139, 140, 141, 142, 143,
+		144, 145, 146, 147, 148, 149, 150, 151,
+		152, 153, 154, 155, 156, 157, 158, 159,
+		160, 161, 162, 163, 164, 165, 166, 167,
+		168, 169, 170, 171, 172, 173, 174, 175,
+		176, 177, 178, 179, 180, 181, 182, 183,
+		184, 185, 186, 187, 188, 189, 190, 191,
+		192, 193, 194, 195, 196, 197, 198, 199,
+		200, 201, 202, 203, 204, 205, 206, 207,
+		208, 209, 210, 211, 212, 213, 214, 215,
+		216, 217, 218, 219, 220, 221, 222, 223,
+		224, 225, 226, 227, 228, 229, 230, 231,
+		232, 233, 234, 235, 236, 237, 238, 239,
+		240, 241, 242, 243, 244, 245, 246, 247,
+		248, 249, 250, 251, 252, 253, 254, 255,
+		256, 257, 258, 259, 260, 261, 262, 263,
+	},
+	.oobfree = { {2, 6}, {264, 80} },
+};
 
 /*
  * Generic flash bbt descriptors
@@ -428,20 +491,27 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 		if (mtd->writesize > 512) {
 			nand_fcr0 =
 				(NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
-				(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT);
+				(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) |
+				(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT);
 
 			out_be32(&ifc->ifc_nand.nand_fir0,
 				 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
 				 (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
 				 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
 				 (IFC_FIR_OP_WBCD  << IFC_NAND_FIR0_OP3_SHIFT) |
-				 (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT));
-			out_be32(&ifc->ifc_nand.nand_fir1, 0);
+				 (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT));
+			out_be32(&ifc->ifc_nand.nand_fir1,
+				 (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
+				 (IFC_FIR_OP_RDSTAT <<
+					IFC_NAND_FIR1_OP6_SHIFT) |
+				 (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT));
 		} else {
 			nand_fcr0 = ((NAND_CMD_PAGEPROG <<
 					IFC_NAND_FCR0_CMD1_SHIFT) |
 				    (NAND_CMD_SEQIN <<
-					IFC_NAND_FCR0_CMD2_SHIFT));
+					IFC_NAND_FCR0_CMD2_SHIFT) |
+				    (NAND_CMD_STATUS <<
+					IFC_NAND_FCR0_CMD3_SHIFT));
 
 			out_be32(&ifc->ifc_nand.nand_fir0,
 				 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
@@ -450,7 +520,11 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 				 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
 				 (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
 			out_be32(&ifc->ifc_nand.nand_fir1,
-				 (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT));
+				 (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
+				 (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
+				 (IFC_FIR_OP_RDSTAT <<
+					IFC_NAND_FIR1_OP7_SHIFT) |
+				 (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT));
 
 			if (column >= mtd->writesize)
 				nand_fcr0 |=
@@ -902,6 +976,21 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
 		priv->bufnum_mask = 1;
 		break;
 
+	case CSOR_NAND_PGS_8K:
+		if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+		    CSOR_NAND_ECC_MODE_4) {
+			layout = &oob_8192_ecc4;
+			nand->ecc.strength = 4;
+		} else {
+			layout = &oob_8192_ecc8;
+			nand->ecc.strength = 8;
+			nand->ecc.bytes = 16;
+		}
+
+		priv->bufnum_mask = 0;
+		break;
+
+
 	default:
 		printf("ifc nand: bad csor %#x: bad page size\n", csor);
 		return -ENODEV;
diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c
index d462265..9de327b 100644
--- a/drivers/mtd/nand/fsl_ifc_spl.c
+++ b/drivers/mtd/nand/fsl_ifc_spl.c
@@ -9,7 +9,7 @@
 
 #include <common.h>
 #include <asm/io.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 #include <linux/mtd/nand.h>
 
 static inline int is_blank(uchar *addr, int page_size)
@@ -112,10 +112,13 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
 
 	port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
 
-	if (csor & CSOR_NAND_PGS_4K) {
+	if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_8K) {
+		page_size = 8192;
+		bufnum_mask = 0x0;
+	} else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_4K) {
 		page_size = 4096;
 		bufnum_mask = 0x1;
-	} else if (csor & CSOR_NAND_PGS_2K) {
+	} else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K) {
 		page_size = 2048;
 		bufnum_mask = 0x3;
 	} else {
diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c
new file mode 100644
index 0000000..2aa7807
--- /dev/null
+++ b/drivers/mtd/nand/omap_elm.c
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com>
+ * Mansoor Ahamed <mansoor.ahamed@ti.com>
+ *
+ * BCH Error Location Module (ELM) support.
+ *
+ * NOTE:
+ * 1. Supports only continuous mode. Dont see need for page mode in uboot
+ * 2. Supports only syndrome polynomial 0. i.e. poly local variable is
+ *    always set to ELM_DEFAULT_POLY. Dont see need for other polynomial
+ *    sets in uboot
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/cpu.h>
+#include <asm/omap_gpmc.h>
+#include <asm/omap_elm.h>
+
+#define ELM_DEFAULT_POLY (0)
+
+struct elm *elm_cfg;
+
+/**
+ * elm_load_syndromes - Load BCH syndromes based on nibble selection
+ * @syndrome: BCH syndrome
+ * @nibbles:
+ * @poly: Syndrome Polynomial set to use
+ *
+ * Load BCH syndromes based on nibble selection
+ */
+static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly)
+{
+	u32 *ptr;
+	u32 val;
+
+	/* reg 0 */
+	ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0];
+	val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) |
+				(syndrome[3] << 24);
+	writel(val, ptr);
+	/* reg 1 */
+	ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1];
+	val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) |
+				(syndrome[7] << 24);
+	writel(val, ptr);
+
+	/* BCH 8-bit with 26 nibbles (4*8=32) */
+	if (nibbles > 13) {
+		/* reg 2 */
+		ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2];
+		val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) |
+				(syndrome[11] << 24);
+		writel(val, ptr);
+		/* reg 3 */
+		ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3];
+		val = syndrome[12] | (syndrome[13] << 8) |
+			(syndrome[14] << 16) | (syndrome[15] << 24);
+		writel(val, ptr);
+	}
+
+	/* BCH 16-bit with 52 nibbles (7*8=56) */
+	if (nibbles > 26) {
+		/* reg 4 */
+		ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4];
+		val = syndrome[16] | (syndrome[17] << 8) |
+			(syndrome[18] << 16) | (syndrome[19] << 24);
+		writel(val, ptr);
+
+		/* reg 5 */
+		ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5];
+		val = syndrome[20] | (syndrome[21] << 8) |
+			(syndrome[22] << 16) | (syndrome[23] << 24);
+		writel(val, ptr);
+
+		/* reg 6 */
+		ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6];
+		val = syndrome[24] | (syndrome[25] << 8) |
+			(syndrome[26] << 16) | (syndrome[27] << 24);
+		writel(val, ptr);
+	}
+}
+
+/**
+ * elm_check_errors - Check for BCH errors and return error locations
+ * @syndrome: BCH syndrome
+ * @nibbles:
+ * @error_count: Returns number of errrors in the syndrome
+ * @error_locations: Returns error locations (in decimal) in this array
+ *
+ * Check the provided syndrome for BCH errors and return error count
+ * and locations in the array passed. Returns -1 if error is not correctable,
+ * else returns 0
+ */
+int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
+		u32 *error_locations)
+{
+	u8 poly = ELM_DEFAULT_POLY;
+	s8 i;
+	u32 location_status;
+
+	elm_load_syndromes(syndrome, nibbles, poly);
+
+	/* start processing */
+	writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6])
+				| ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID),
+		&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]);
+
+	/* wait for processing to complete */
+	while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1)
+		;
+	/* clear status */
+	writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)),
+			&elm_cfg->irqstatus);
+
+	/* check if correctable */
+	location_status = readl(&elm_cfg->error_location[poly].location_status);
+	if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK))
+		return -1;
+
+	/* get error count */
+	*error_count = readl(&elm_cfg->error_location[poly].location_status) &
+					ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK;
+
+	for (i = 0; i < *error_count; i++) {
+		error_locations[i] =
+		     readl(&elm_cfg->error_location[poly].error_location_x[i]);
+	}
+
+	return 0;
+}
+
+
+/**
+ * elm_config - Configure ELM module
+ * @level: 4 / 8 / 16 bit BCH
+ *
+ * Configure ELM module based on BCH level.
+ * Set mode as continuous mode.
+ * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used.
+ * Also, the mode is set only for syndrome 0
+ */
+int elm_config(enum bch_level level)
+{
+	u32 val;
+	u8 poly = ELM_DEFAULT_POLY;
+	u32 buffer_size = 0x7FF;
+
+	/* config size and level */
+	val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK;
+	val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) &
+				ELM_LOCATION_CONFIG_ECC_SIZE_MASK);
+	writel(val, &elm_cfg->location_config);
+
+	/* config continous mode */
+	/* enable interrupt generation for syndrome polynomial set */
+	writel((readl(&elm_cfg->irqenable) | (0x1 << poly)),
+			&elm_cfg->irqenable);
+	/* set continuous mode for the syndrome polynomial set */
+	writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)),
+			&elm_cfg->page_ctrl);
+
+	return 0;
+}
+
+/**
+ * elm_reset - Do a soft reset of ELM
+ *
+ * Perform a soft reset of ELM and return after reset is done.
+ */
+void elm_reset(void)
+{
+	/* initiate reset */
+	writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET),
+			&elm_cfg->sysconfig);
+
+	/* wait for reset complete and normal operation */
+	while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) !=
+		ELM_SYSSTATUS_RESETDONE)
+		;
+}
+
+/**
+ * elm_init - Initialize ELM module
+ *
+ * Initialize ELM support. Currently it does only base address init
+ * and ELM reset.
+ */
+void elm_init(void)
+{
+	elm_cfg = (struct elm *)ELM_BASE;
+	elm_reset();
+}
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index ec1787f..5e7e6b3 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -15,15 +15,13 @@
 #include <linux/bch.h>
 #include <linux/compiler.h>
 #include <nand.h>
-#ifdef CONFIG_AM33XX
-#include <asm/arch/elm.h>
-#endif
+#include <asm/omap_elm.h>
+
+#define BADBLOCK_MARKER_LENGTH	2
+#define SECTOR_BYTES		512
 
 static uint8_t cs;
-static __maybe_unused struct nand_ecclayout hw_nand_oob =
-	GPMC_NAND_HW_ECC_LAYOUT;
-static __maybe_unused struct nand_ecclayout hw_bch8_nand_oob =
-	GPMC_NAND_HW_BCH8_ECC_LAYOUT;
+static __maybe_unused struct nand_ecclayout omap_ecclayout;
 
 /*
  * omap_nand_hwcontrol - Set the address pointers corretly for the
@@ -233,6 +231,7 @@ struct nand_bch_priv {
 	uint8_t type;
 	uint8_t nibbles;
 	struct bch_control *control;
+	enum omap_ecc ecc_scheme;
 };
 
 /* bch types */
@@ -274,17 +273,15 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode)
 {
 	uint32_t val;
 	uint32_t dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1;
-#ifdef CONFIG_AM33XX
 	uint32_t unused_length = 0;
-#endif
 	uint32_t wr_mode = BCH_WRAPMODE_6;
 	struct nand_bch_priv *bch = chip->priv;
 
 	/* Clear the ecc result registers, select ecc reg as 1 */
 	writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
 
-#ifdef CONFIG_AM33XX
-	wr_mode = BCH_WRAPMODE_1;
+	if (bch->ecc_scheme == OMAP_ECC_BCH8_CODE_HW) {
+		wr_mode = BCH_WRAPMODE_1;
 
 	switch (bch->nibbles) {
 	case ECC_BCH4_NIBBLES:
@@ -320,7 +317,7 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode)
 		val |= (unused_length << 22);
 		break;
 	}
-#else
+	} else {
 	/*
 	 * This ecc_size_config setting is for BCH sw library.
 	 *
@@ -333,7 +330,7 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode)
 	 *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
 	 */
 	val = (32 << 22) | (0 << 12);
-#endif
+	}
 	/* ecc size configuration */
 	writel(val, &gpmc_cfg->ecc_size_config);
 
@@ -376,9 +373,9 @@ static void __maybe_unused omap_ecc_disable(struct mtd_info *mtd)
 }
 
 /*
- * BCH8 support (needs ELM and thus AM33xx-only)
+ * BCH support using ELM module
  */
-#ifdef CONFIG_AM33XX
+#ifdef CONFIG_NAND_OMAP_ELM
 /*
  * omap_read_bch8_result - Read BCH result for BCH8 level
  *
@@ -631,20 +628,20 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 	}
 	return 0;
 }
-#endif /* CONFIG_AM33XX */
+#endif /* CONFIG_NAND_OMAP_ELM */
 
 /*
  * OMAP3 BCH8 support (with BCH library)
  */
-#ifdef CONFIG_NAND_OMAP_BCH8
+#ifdef CONFIG_BCH
 /*
- *  omap_calculate_ecc_bch - Read BCH ECC result
+ *  omap_calculate_ecc_bch_sw - Read BCH ECC result
  *
  *  @mtd:	MTD device structure
  *  @dat:	The pointer to data on which ecc is computed (unused here)
  *  @ecc:	The ECC output buffer
  */
-static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat,
+static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, const uint8_t *dat,
 				uint8_t *ecc)
 {
 	int ret = 0;
@@ -689,13 +686,13 @@ static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat,
 }
 
 /**
- * omap_correct_data_bch - Decode received data and correct errors
+ * omap_correct_data_bch_sw - Decode received data and correct errors
  * @mtd: MTD device structure
  * @data: page data
  * @read_ecc: ecc read from nand flash
  * @calc_ecc: ecc read from HW ECC registers
  */
-static int omap_correct_data_bch(struct mtd_info *mtd, u_char *data,
+static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data,
 				 u_char *read_ecc, u_char *calc_ecc)
 {
 	int i, count;
@@ -752,7 +749,150 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
 		chip_priv->control = NULL;
 	}
 }
-#endif /* CONFIG_NAND_OMAP_BCH8 */
+#endif /* CONFIG_BCH */
+
+/**
+ * omap_select_ecc_scheme - configures driver for particular ecc-scheme
+ * @nand: NAND chip device structure
+ * @ecc_scheme: ecc scheme to configure
+ * @pagesize: number of main-area bytes per page of NAND device
+ * @oobsize: number of OOB/spare bytes per page of NAND device
+ */
+static int omap_select_ecc_scheme(struct nand_chip *nand,
+	enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
+	struct nand_bch_priv	*bch		= nand->priv;
+	struct nand_ecclayout	*ecclayout	= nand->ecc.layout;
+	int eccsteps = pagesize / SECTOR_BYTES;
+	int i;
+
+	switch (ecc_scheme) {
+	case OMAP_ECC_HAM1_CODE_SW:
+		debug("nand: selected OMAP_ECC_HAM1_CODE_SW\n");
+		/* For this ecc-scheme, ecc.bytes, ecc.layout, ... are
+		 * initialized in nand_scan_tail(), so just set ecc.mode */
+		bch_priv.control	= NULL;
+		bch_priv.type		= 0;
+		nand->ecc.mode		= NAND_ECC_SOFT;
+		nand->ecc.layout	= NULL;
+		nand->ecc.size		= pagesize;
+		bch->ecc_scheme		= OMAP_ECC_HAM1_CODE_SW;
+		break;
+
+	case OMAP_ECC_HAM1_CODE_HW:
+		debug("nand: selected OMAP_ECC_HAM1_CODE_HW\n");
+		/* check ecc-scheme requirements before updating ecc info */
+		if ((3 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+			printf("nand: error: insufficient OOB: require=%d\n", (
+				(3 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+			return -EINVAL;
+		}
+		bch_priv.control	= NULL;
+		bch_priv.type		= 0;
+		/* populate ecc specific fields */
+		nand->ecc.mode		= NAND_ECC_HW;
+		nand->ecc.strength	= 1;
+		nand->ecc.size		= SECTOR_BYTES;
+		nand->ecc.bytes		= 3;
+		nand->ecc.hwctl		= omap_enable_hwecc;
+		nand->ecc.correct	= omap_correct_data;
+		nand->ecc.calculate	= omap_calculate_ecc;
+		/* define ecc-layout */
+		ecclayout->eccbytes	= nand->ecc.bytes * eccsteps;
+		for (i = 0; i < ecclayout->eccbytes; i++)
+			ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+		ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+		ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+						BADBLOCK_MARKER_LENGTH;
+		bch->ecc_scheme		= OMAP_ECC_HAM1_CODE_HW;
+		break;
+
+	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+#ifdef CONFIG_BCH
+		debug("nand: selected OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
+		/* check ecc-scheme requirements before updating ecc info */
+		if ((13 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+			printf("nand: error: insufficient OOB: require=%d\n", (
+				(13 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+			return -EINVAL;
+		}
+		/* check if BCH S/W library can be used for error detection */
+		bch_priv.control = init_bch(13, 8, 0x201b);
+		if (!bch_priv.control) {
+			printf("nand: error: could not init_bch()\n");
+			return -ENODEV;
+		}
+		bch_priv.type = ECC_BCH8;
+		/* populate ecc specific fields */
+		nand->ecc.mode		= NAND_ECC_HW;
+		nand->ecc.strength	= 8;
+		nand->ecc.size		= SECTOR_BYTES;
+		nand->ecc.bytes		= 13;
+		nand->ecc.hwctl		= omap_enable_ecc_bch;
+		nand->ecc.correct	= omap_correct_data_bch_sw;
+		nand->ecc.calculate	= omap_calculate_ecc_bch_sw;
+		/* define ecc-layout */
+		ecclayout->eccbytes	= nand->ecc.bytes * eccsteps;
+		ecclayout->eccpos[0]	= BADBLOCK_MARKER_LENGTH;
+		for (i = 1; i < ecclayout->eccbytes; i++) {
+			if (i % nand->ecc.bytes)
+				ecclayout->eccpos[i] =
+						ecclayout->eccpos[i - 1] + 1;
+			else
+				ecclayout->eccpos[i] =
+						ecclayout->eccpos[i - 1] + 2;
+		}
+		ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+		ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+						BADBLOCK_MARKER_LENGTH;
+		omap_hwecc_init_bch(nand, NAND_ECC_READ);
+		bch->ecc_scheme		= OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+		break;
+#else
+		printf("nand: error: CONFIG_BCH required for ECC\n");
+		return -EINVAL;
+#endif
+
+	case OMAP_ECC_BCH8_CODE_HW:
+#ifdef CONFIG_NAND_OMAP_ELM
+		debug("nand: selected OMAP_ECC_BCH8_CODE_HW\n");
+		/* check ecc-scheme requirements before updating ecc info */
+		if ((14 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) {
+			printf("nand: error: insufficient OOB: require=%d\n", (
+				(14 * eccsteps) + BADBLOCK_MARKER_LENGTH));
+			return -EINVAL;
+		}
+		/* intialize ELM for ECC error detection */
+		elm_init();
+		bch_priv.type		= ECC_BCH8;
+		/* populate ecc specific fields */
+		nand->ecc.mode		= NAND_ECC_HW;
+		nand->ecc.strength	= 8;
+		nand->ecc.size		= SECTOR_BYTES;
+		nand->ecc.bytes		= 14;
+		nand->ecc.hwctl		= omap_enable_ecc_bch;
+		nand->ecc.correct	= omap_correct_data_bch;
+		nand->ecc.calculate	= omap_calculate_ecc_bch;
+		nand->ecc.read_page	= omap_read_page_bch;
+		/* define ecc-layout */
+		ecclayout->eccbytes	= nand->ecc.bytes * eccsteps;
+		for (i = 0; i < ecclayout->eccbytes; i++)
+			ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH;
+		ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
+		ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
+						BADBLOCK_MARKER_LENGTH;
+		bch->ecc_scheme		= OMAP_ECC_BCH8_CODE_HW;
+		break;
+#else
+		printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n");
+		return -EINVAL;
+#endif
+
+	default:
+		debug("nand: error: ecc scheme not enabled or supported\n");
+		return -EINVAL;
+	}
+	return 0;
+}
 
 #ifndef CONFIG_SPL_BUILD
 /*
@@ -763,77 +903,45 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
  * @eccstrength		- the number of bits that could be corrected
  *			  (1 - hamming, 4 - BCH4, 8 - BCH8, 16 - BCH16)
  */
-void omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength)
+int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength)
 {
 	struct nand_chip *nand;
 	struct mtd_info *mtd;
+	int err = 0;
 
 	if (nand_curr_device < 0 ||
 	    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
 	    !nand_info[nand_curr_device].name) {
-		printf("Error: Can't switch ecc, no devices available\n");
-		return;
+		printf("nand: error: no NAND devices found\n");
+		return -ENODEV;
 	}
 
 	mtd = &nand_info[nand_curr_device];
 	nand = mtd->priv;
-
 	nand->options |= NAND_OWN_BUFFERS;
-
-	/* Reset ecc interface */
-	nand->ecc.mode = NAND_ECC_NONE;
-	nand->ecc.read_page = NULL;
-	nand->ecc.write_page = NULL;
-	nand->ecc.read_oob = NULL;
-	nand->ecc.write_oob = NULL;
-	nand->ecc.hwctl = NULL;
-	nand->ecc.correct = NULL;
-	nand->ecc.calculate = NULL;
-	nand->ecc.strength = eccstrength;
-
 	/* Setup the ecc configurations again */
 	if (hardware) {
 		if (eccstrength == 1) {
-			nand->ecc.mode = NAND_ECC_HW;
-			nand->ecc.layout = &hw_nand_oob;
-			nand->ecc.size = 512;
-			nand->ecc.bytes = 3;
-			nand->ecc.hwctl = omap_enable_hwecc;
-			nand->ecc.correct = omap_correct_data;
-			nand->ecc.calculate = omap_calculate_ecc;
-			omap_hwecc_init(nand);
-			printf("1-bit hamming HW ECC selected\n");
-		}
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
-		else if (eccstrength == 8) {
-			nand->ecc.mode = NAND_ECC_HW;
-			nand->ecc.layout = &hw_bch8_nand_oob;
-			nand->ecc.size = 512;
-#ifdef CONFIG_AM33XX
-			nand->ecc.bytes = 14;
-			nand->ecc.read_page = omap_read_page_bch;
-#else
-			nand->ecc.bytes = 13;
-#endif
-			nand->ecc.hwctl = omap_enable_ecc_bch;
-			nand->ecc.correct = omap_correct_data_bch;
-			nand->ecc.calculate = omap_calculate_ecc_bch;
-			omap_hwecc_init_bch(nand, NAND_ECC_READ);
-			printf("8-bit BCH HW ECC selected\n");
+			err = omap_select_ecc_scheme(nand,
+					OMAP_ECC_HAM1_CODE_HW,
+					mtd->writesize, mtd->oobsize);
+		} else if (eccstrength == 8) {
+			err = omap_select_ecc_scheme(nand,
+					OMAP_ECC_BCH8_CODE_HW,
+					mtd->writesize, mtd->oobsize);
+		} else {
+			printf("nand: error: unsupported ECC scheme\n");
+			return -EINVAL;
 		}
-#endif
 	} else {
-		nand->ecc.mode = NAND_ECC_SOFT;
-		/* Use mtd default settings */
-		nand->ecc.layout = NULL;
-		nand->ecc.size = 0;
-		printf("SW ECC selected\n");
+		err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW,
+					mtd->writesize, mtd->oobsize);
 	}
 
 	/* Update NAND handling after ECC mode switch */
-	nand_scan_tail(mtd);
-
-	nand->options &= ~NAND_OWN_BUFFERS;
+	if (!err)
+		err = nand_scan_tail(mtd);
+	return err;
 }
 #endif /* CONFIG_SPL_BUILD */
 
@@ -856,7 +964,7 @@ int board_nand_init(struct nand_chip *nand)
 {
 	int32_t gpmc_config = 0;
 	cs = 0;
-
+	int err = 0;
 	/*
 	 * xloader/Uboot's gpmc configuration would have configured GPMC for
 	 * nand type of memory. The following logic scans and latches on to the
@@ -873,7 +981,7 @@ int board_nand_init(struct nand_chip *nand)
 		cs++;
 	}
 	if (cs >= GPMC_MAX_CS) {
-		printf("NAND: Unable to find NAND settings in "
+		printf("nand: error: Unable to find NAND settings in "
 			"GPMC Configuration - quitting\n");
 		return -ENODEV;
 	}
@@ -885,64 +993,27 @@ int board_nand_init(struct nand_chip *nand)
 
 	nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
 	nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
-
-	nand->cmd_ctrl = omap_nand_hwcontrol;
-	nand->options = NAND_NO_PADDING | NAND_CACHEPRG;
+	nand->priv	= &bch_priv;
+	nand->cmd_ctrl	= omap_nand_hwcontrol;
+	nand->options	|= NAND_NO_PADDING | NAND_CACHEPRG;
 	/* If we are 16 bit dev, our gpmc config tells us that */
 	if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000)
 		nand->options |= NAND_BUSWIDTH_16;
 
 	nand->chip_delay = 100;
+	nand->ecc.layout = &omap_ecclayout;
 
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
-#ifdef CONFIG_AM33XX
-	/* AM33xx uses the ELM */
-	/* required in case of BCH */
-	elm_init();
-#else
-	/*
-	 * Whereas other OMAP based SoC do not have the ELM, they use the BCH
-	 * SW library.
-	 */
-	bch_priv.control = init_bch(13, 8, 0x201b /* hw polynominal */);
-	if (!bch_priv.control) {
-		puts("Could not init_bch()\n");
-		return -ENODEV;
-	}
-#endif
-	/* BCH info that will be correct for SPL or overridden otherwise. */
-	nand->priv = &bch_priv;
-#endif
-
-	/* Default ECC mode */
-#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8)
-	nand->ecc.mode = NAND_ECC_HW;
-	nand->ecc.layout = &hw_bch8_nand_oob;
-	nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
-	nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
-	nand->ecc.strength = 8;
-	nand->ecc.hwctl = omap_enable_ecc_bch;
-	nand->ecc.correct = omap_correct_data_bch;
-	nand->ecc.calculate = omap_calculate_ecc_bch;
-#ifdef CONFIG_AM33XX
-	nand->ecc.read_page = omap_read_page_bch;
-#endif
-	omap_hwecc_init_bch(nand, NAND_ECC_READ);
-#else
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC)
-	nand->ecc.mode = NAND_ECC_SOFT;
+	/* select ECC scheme */
+#if defined(CONFIG_NAND_OMAP_ECCSCHEME)
+	err = omap_select_ecc_scheme(nand, CONFIG_NAND_OMAP_ECCSCHEME,
+			CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE);
 #else
-	nand->ecc.mode = NAND_ECC_HW;
-	nand->ecc.layout = &hw_nand_oob;
-	nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
-	nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
-	nand->ecc.hwctl = omap_enable_hwecc;
-	nand->ecc.correct = omap_correct_data;
-	nand->ecc.calculate = omap_calculate_ecc;
-	nand->ecc.strength = 1;
-	omap_hwecc_init(nand);
-#endif
+	/* pagesize and oobsize are not required to configure sw ecc-scheme */
+	err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW,
+			0, 0);
 #endif
+	if (err)
+		return err;
 
 #ifdef CONFIG_SPL_BUILD
 	if (nand->options & NAND_BUSWIDTH_16)
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 067f8ef..979e4af 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -761,7 +761,8 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf,
 	uint8_t *oob_buf = this->oob_buf;
 
 	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
 		if (readcol >= lastgap)
 			readcol += free->offset - lastgap;
 		if (readend >= lastgap)
@@ -770,7 +771,8 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf,
 	}
 	this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
 	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
 		int free_end = free->offset + free->length;
 		if (free->offset < readend && free_end > readcol) {
 			int st = max_t(int,free->offset,readcol);
@@ -1356,7 +1358,8 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
 	unsigned int i;
 
 	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
 		if (writecol >= lastgap)
 			writecol += free->offset - lastgap;
 		if (writeend >= lastgap)
@@ -1364,7 +1367,8 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
 		lastgap = free->offset + free->length;
 	}
 	free = this->ecclayout->oobfree;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
 		int free_end = free->offset + free->length;
 		if (free->offset < writeend && free_end > writecol) {
 			int st = max_t(int,free->offset,writecol);
@@ -2750,7 +2754,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 	 * the out of band area
 	 */
 	this->ecclayout->oobavail = 0;
-	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
+
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE &&
 	    this->ecclayout->oobfree[i].length; i++)
 		this->ecclayout->oobavail +=
 			this->ecclayout->oobfree[i].length;
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 8413d57..22155b4 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -96,7 +96,7 @@ static int mac_reset(struct eth_device *dev)
 	ulong start;
 	int timeout = CONFIG_MACRESET_TIMEOUT;
 
-	writel(DMAMAC_SRST, &dma_p->busmode);
+	writel(readl(&dma_p->busmode) | DMAMAC_SRST, &dma_p->busmode);
 
 	if (priv->interface != PHY_INTERFACE_MODE_RGMII)
 		writel(MII_PORTSELECT, &mac_p->conf);
diff --git a/drivers/net/designware.h b/drivers/net/designware.h
index e80002a..5440c92 100644
--- a/drivers/net/designware.h
+++ b/drivers/net/designware.h
@@ -112,7 +112,7 @@ struct dmamacdescr {
 	u32 dmamac_cntl;
 	void *dmamac_addr;
 	struct dmamacdescr *dmamac_next;
-};
+} __aligned(16);
 
 /*
  * txrx_status definitions
@@ -224,8 +224,7 @@ struct dw_eth_dev {
 	u32 tx_currdescnum;
 	u32 rx_currdescnum;
 	u32 phy_configured;
-	int link_printed;
-	u32 padding;
+	u32 link_printed;
 
 	struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
 	struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
@@ -237,7 +236,7 @@ struct dw_eth_dev {
 	struct eth_dma_regs *dma_regs_p;
 
 	struct eth_device *dev;
-} __attribute__ ((aligned(8)));
+};
 
 /* Speed specific definitions */
 #define SPEED_10M		1
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index f7170e0..b68d808 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -342,6 +342,15 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
 	DM9000_iow(DM9000_ISR, ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS);
 
 	printf("MAC: %pM\n", dev->enetaddr);
+	if (!is_valid_ether_addr(dev->enetaddr)) {
+#ifdef CONFIG_RANDOM_MACADDR
+		printf("Bad MAC address (uninitialized EEPROM?), randomizing\n");
+		eth_random_enetaddr(dev->enetaddr);
+		printf("MAC: %pM\n", dev->enetaddr);
+#else
+		printf("WARNING: Bad MAC address (uninitialized EEPROM?)\n");
+#endif
+	}
 
 	/* fill device MAC address registers */
 	for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 57aa53d..9a66e68 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -114,12 +114,13 @@ static int e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr,
 static int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
 static int e1000_phy_reset(struct e1000_hw *hw);
 static int e1000_detect_gig_phy(struct e1000_hw *hw);
-static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
 static void e1000_set_media_type(struct e1000_hw *hw);
 
 static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
 static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
 
+#ifndef CONFIG_E1000_NO_NVM
+static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
 static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset,
 		uint16_t words,
 		uint16_t *data);
@@ -885,6 +886,7 @@ static int e1000_validate_eeprom_checksum(struct e1000_hw *hw)
 
 	return -E1000_ERR_EEPROM;
 }
+#endif /* CONFIG_E1000_NO_NVM */
 
 /*****************************************************************************
  * Set PHY to class A mode
@@ -897,6 +899,7 @@ static int e1000_validate_eeprom_checksum(struct e1000_hw *hw)
 static int32_t
 e1000_set_phy_mode(struct e1000_hw *hw)
 {
+#ifndef CONFIG_E1000_NO_NVM
 	int32_t ret_val;
 	uint16_t eeprom_data;
 
@@ -923,10 +926,11 @@ e1000_set_phy_mode(struct e1000_hw *hw)
 			hw->phy_reset_disable = false;
 		}
 	}
-
+#endif
 	return E1000_SUCCESS;
 }
 
+#ifndef CONFIG_E1000_NO_NVM
 /***************************************************************************
  *
  * Obtaining software semaphore bit (SMBI) before resetting PHY.
@@ -965,6 +969,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw)
 
 	return E1000_SUCCESS;
 }
+#endif
 
 /***************************************************************************
  * This function clears HW semaphore bits.
@@ -977,6 +982,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw)
 static void
 e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
 {
+#ifndef CONFIG_E1000_NO_NVM
 	 uint32_t swsm;
 
 	DEBUGFUNC();
@@ -991,6 +997,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
 	} else
 		swsm &= ~(E1000_SWSM_SWESMBI);
 	E1000_WRITE_REG(hw, SWSM, swsm);
+#endif
 }
 
 /***************************************************************************
@@ -1007,6 +1014,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
 static int32_t
 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
 {
+#ifndef CONFIG_E1000_NO_NVM
 	int32_t timeout;
 	uint32_t swsm;
 
@@ -1043,7 +1051,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
 				"SWESMBI bit is set.\n");
 		return -E1000_ERR_EEPROM;
 	}
-
+#endif
 	return E1000_SUCCESS;
 }
 
@@ -1097,6 +1105,7 @@ static bool e1000_is_second_port(struct e1000_hw *hw)
 	}
 }
 
+#ifndef CONFIG_E1000_NO_NVM
 /******************************************************************************
  * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
  * second function of dual function devices
@@ -1136,6 +1145,7 @@ e1000_read_mac_addr(struct eth_device *nic)
 #endif
 	return 0;
 }
+#endif
 
 /******************************************************************************
  * Initializes receive address filters.
@@ -1764,9 +1774,11 @@ static int
 e1000_setup_link(struct eth_device *nic)
 {
 	struct e1000_hw *hw = nic->priv;
-	uint32_t ctrl_ext;
 	int32_t ret_val;
+#ifndef CONFIG_E1000_NO_NVM
+	uint32_t ctrl_ext;
 	uint16_t eeprom_data;
+#endif
 
 	DEBUGFUNC();
 
@@ -1775,6 +1787,7 @@ e1000_setup_link(struct eth_device *nic)
 	if (e1000_check_phy_reset_block(hw))
 		return E1000_SUCCESS;
 
+#ifndef CONFIG_E1000_NO_NVM
 	/* Read and store word 0x0F of the EEPROM. This word contains bits
 	 * that determine the hardware's default PAUSE (flow control) mode,
 	 * a bit that determines whether the HW defaults to enabling or
@@ -1788,7 +1801,7 @@ e1000_setup_link(struct eth_device *nic)
 		DEBUGOUT("EEPROM Read Error\n");
 		return -E1000_ERR_EEPROM;
 	}
-
+#endif
 	if (hw->fc == e1000_fc_default) {
 		switch (hw->mac_type) {
 		case e1000_ich8lan:
@@ -1797,6 +1810,7 @@ e1000_setup_link(struct eth_device *nic)
 			hw->fc = e1000_fc_full;
 			break;
 		default:
+#ifndef CONFIG_E1000_NO_NVM
 			ret_val = e1000_read_eeprom(hw,
 				EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
 			if (ret_val) {
@@ -1809,6 +1823,7 @@ e1000_setup_link(struct eth_device *nic)
 				    EEPROM_WORD0F_ASM_DIR)
 				hw->fc = e1000_fc_tx_pause;
 			else
+#endif
 				hw->fc = e1000_fc_full;
 			break;
 		}
@@ -1828,6 +1843,7 @@ e1000_setup_link(struct eth_device *nic)
 
 	DEBUGOUT("After fix-ups FlowControl is now = %x\n", hw->fc);
 
+#ifndef CONFIG_E1000_NO_NVM
 	/* Take the 4 bits from EEPROM word 0x0F that determine the initial
 	 * polarity value for the SW controlled pins, and setup the
 	 * Extended Device Control reg with that info.
@@ -1840,6 +1856,7 @@ e1000_setup_link(struct eth_device *nic)
 			    SWDPIO__EXT_SHIFT);
 		E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
 	}
+#endif
 
 	/* Call the necessary subroutine to configure the link. */
 	ret_val = (hw->media_type == e1000_media_type_fiber) ?
@@ -5196,6 +5213,7 @@ e1000_initialize(bd_t * bis)
 		e1000_reset_hw(hw);
 		list_add_tail(&hw->list_node, &e1000_hw_list);
 
+#ifndef CONFIG_E1000_NO_NVM
 		/* Validate the EEPROM and get chipset information */
 #if !defined(CONFIG_MVBC_1G)
 		if (e1000_init_eeprom_params(hw)) {
@@ -5206,11 +5224,17 @@ e1000_initialize(bd_t * bis)
 			continue;
 #endif
 		e1000_read_mac_addr(nic);
+#endif
 		e1000_get_bus_type(hw);
 
+#ifndef CONFIG_E1000_NO_NVM
 		printf("e1000: %02x:%02x:%02x:%02x:%02x:%02x\n       ",
 		       nic->enetaddr[0], nic->enetaddr[1], nic->enetaddr[2],
 		       nic->enetaddr[3], nic->enetaddr[4], nic->enetaddr[5]);
+#else
+		memset(nic->enetaddr, 0, 6);
+		printf("e1000: no NVM\n");
+#endif
 
 		/* Set up the function pointers and register the device */
 		nic->init = e1000_init;
diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
index 25884f5..ff87af2 100644
--- a/drivers/net/e1000.h
+++ b/drivers/net/e1000.h
@@ -63,11 +63,14 @@ struct e1000_hw_stats;
 
 /* Internal E1000 helper functions */
 struct e1000_hw *e1000_find_card(unsigned int cardnum);
+
+#ifndef CONFIG_E1000_NO_NVM
 int32_t e1000_acquire_eeprom(struct e1000_hw *hw);
 void e1000_standby_eeprom(struct e1000_hw *hw);
 void e1000_release_eeprom(struct e1000_hw *hw);
 void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
 void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t *eecd);
+#endif
 
 #ifdef CONFIG_E1000_SPI
 int do_e1000_spi(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
@@ -1019,6 +1022,7 @@ struct e1000_hw_stats {
 	uint64_t tsctfc;
 };
 
+#ifndef CONFIG_E1000_NO_NVM
 struct e1000_eeprom_info {
 e1000_eeprom_type type;
 	uint16_t word_size;
@@ -1029,6 +1033,7 @@ e1000_eeprom_type type;
 	bool use_eerd;
 	bool use_eewr;
 };
+#endif
 
 typedef enum {
     e1000_smart_speed_default = 0,
@@ -1081,10 +1086,14 @@ struct e1000_hw {
 	uint32_t io_base;
 #endif
 	uint32_t		asf_firmware_present;
+#ifndef CONFIG_E1000_NO_NVM
 	uint32_t		eeprom_semaphore_present;
+#endif
 	uint32_t		swfw_sync_present;
 	uint32_t		swfwhw_semaphore_present;
+#ifndef CONFIG_E1000_NO_NVM
 	struct e1000_eeprom_info eeprom;
+#endif
 	e1000_ms_type		master_slave;
 	e1000_ms_type		original_master_slave;
 	e1000_ffe_config	ffe_config_state;
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index bec86c1..ee5d768 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -4,7 +4,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-ifdef CONFIG_FMAN_ENET
 obj-y += dtsec.o
 obj-y += eth.o
 obj-y += fm.o
@@ -26,8 +25,12 @@ obj-$(CONFIG_PPC_P4080) += p4080.o
 obj-$(CONFIG_PPC_P5020) += p5020.o
 obj-$(CONFIG_PPC_P5040) += p5040.o
 obj-$(CONFIG_PPC_T1040) += t1040.o
+obj-$(CONFIG_PPC_T1042)	+= t1040.o
+obj-$(CONFIG_PPC_T1020)	+= t1040.o
+obj-$(CONFIG_PPC_T1022)	+= t1040.o
+obj-$(CONFIG_PPC_T2080) += t2080.o
+obj-$(CONFIG_PPC_T2081) += t2080.o
 obj-$(CONFIG_PPC_T4240) += t4240.o
 obj-$(CONFIG_PPC_T4160) += t4240.o
 obj-$(CONFIG_PPC_B4420) += b4860.o
 obj-$(CONFIG_PPC_B4860) += b4860.o
-endif
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index cb099cd..218a5ed 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -557,8 +557,16 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
 	num = fm_eth->num;
 
 #ifdef CONFIG_SYS_FMAN_V3
-	if (fm_eth->type == FM_ETH_10G_E)
-		num += 8;
+	if (fm_eth->type == FM_ETH_10G_E) {
+		/* 10GEC1/10GEC2 use mEMAC9/mEMAC10
+		 * 10GEC3/10GEC4 use mEMAC1/mEMAC2
+		 * so it needs to change the num.
+		 */
+		if (fm_eth->num >= 2)
+			num -= 2;
+		else
+			num += 8;
+	}
 	base = &reg->memac[num].fm_memac;
 	phyregs = &reg->memac[num].fm_memac_mdio;
 #else
diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h
index 3ec49a4..43de114 100644
--- a/drivers/net/fm/fm.h
+++ b/drivers/net/fm/fm.h
@@ -18,9 +18,11 @@
 #define RX_PORT_1G_BASE		0x08
 #define MAX_NUM_RX_PORT_1G	CONFIG_SYS_NUM_FM1_DTSEC
 #define RX_PORT_10G_BASE	0x10
+#define RX_PORT_10G_BASE2	0x08
 #define TX_PORT_1G_BASE		0x28
 #define MAX_NUM_TX_PORT_1G	CONFIG_SYS_NUM_FM1_DTSEC
 #define TX_PORT_10G_BASE	0x30
+#define TX_PORT_10G_BASE2	0x28
 #define MIIM_TIMEOUT    0xFFFF
 
 struct fm_muram {
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index 35edd7a..cd787f4 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -64,6 +64,12 @@ struct fm_eth_info fm_info[] = {
 #if (CONFIG_SYS_NUM_FM1_10GEC >= 2)
 	FM_TGEC_INFO_INITIALIZER(1, 2),
 #endif
+#if (CONFIG_SYS_NUM_FM1_10GEC >= 3)
+	FM_TGEC_INFO_INITIALIZER2(1, 3),
+#endif
+#if (CONFIG_SYS_NUM_FM1_10GEC >= 4)
+	FM_TGEC_INFO_INITIALIZER2(1, 4),
+#endif
 #if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
 	FM_TGEC_INFO_INITIALIZER(2, 1),
 #endif
@@ -239,10 +245,14 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
 	 * FM1_10GEC1 is enabled and  FM1_DTSEC9 is disabled, ensure that the
 	 * dual-role MAC is not disabled, ditto for other dual-role MACs.
 	 */
-	if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))	||
-	    ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2)))	||
-	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))	||
-	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10)))
+	if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
+	    ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
+	    ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
+	    ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
+	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))  ||
+	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
+	    ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
+	    ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2)))
 #if (CONFIG_SYS_NUM_FMAN == 2)
 										||
 	    ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1)))	||
diff --git a/drivers/net/fm/t2080.c b/drivers/net/fm/t2080.c
new file mode 100644
index 0000000..b5c1e9f
--- /dev/null
+++ b/drivers/net/fm/t2080.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+	[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+	[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+	[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+	[FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+	[FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5,
+	[FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6,
+	[FM1_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC1_9,
+	[FM1_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC1_10,
+	[FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1,
+	[FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2,
+	[FM1_10GEC3] = FSL_CORENET_DEVDISR2_10GEC1_3,
+	[FM1_10GEC4] = FSL_CORENET_DEVDISR2_10GEC1_4,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 devdisr2 = in_be32(&gur->devdisr2);
+
+	return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+	if (is_device_disabled(port))
+		return PHY_INTERFACE_MODE_NONE;
+
+	if ((port == FM1_10GEC1 || port == FM1_10GEC2 ||
+	     port == FM1_10GEC3 || port == FM1_10GEC4) &&
+	    ((is_serdes_configured(XAUI_FM1_MAC9))	||
+	     (is_serdes_configured(XFI_FM1_MAC1))	||
+	     (is_serdes_configured(XFI_FM1_MAC2))	||
+	     (is_serdes_configured(XFI_FM1_MAC9))	||
+	     (is_serdes_configured(XFI_FM1_MAC10))))
+		return PHY_INTERFACE_MODE_XGMII;
+
+	if ((port == FM1_DTSEC3) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
+		FSL_CORENET_RCWSR13_EC1_DTSEC3_RGMII))
+		return PHY_INTERFACE_MODE_RGMII;
+
+	if ((port == FM1_DTSEC4) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+		FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII))
+		return PHY_INTERFACE_MODE_RGMII;
+
+	if ((port == FM1_DTSEC10) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+		FSL_CORENET_RCWSR13_EC2_DTSEC10_RGMII))
+		return PHY_INTERFACE_MODE_RGMII;
+
+	switch (port) {
+	case FM1_DTSEC1:
+	case FM1_DTSEC2:
+	case FM1_DTSEC3:
+	case FM1_DTSEC4:
+	case FM1_DTSEC5:
+	case FM1_DTSEC6:
+	case FM1_DTSEC9:
+	case FM1_DTSEC10:
+		if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+			return PHY_INTERFACE_MODE_SGMII;
+		break;
+	default:
+		return PHY_INTERFACE_MODE_NONE;
+	}
+
+	return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c
index ce36bd7..1d88e65 100644
--- a/drivers/net/fsl_mdio.c
+++ b/drivers/net/fsl_mdio.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010, 2013 Freescale Semiconductor, Inc.
  *	Jun-jie Zhang <b18070@freescale.com>
  *	Mingkai Hu <Mingkai.hu@freescale.com>
  *
@@ -13,7 +13,7 @@
 #include <asm/errno.h>
 #include <asm/fsl_enet.h>
 
-void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
+void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr,
 		int dev_addr, int regnum, int value)
 {
 	int timeout = 1000000;
@@ -26,7 +26,7 @@ void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
 		;
 }
 
-int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
+int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr,
 		int dev_addr, int regnum)
 {
 	int value;
@@ -57,7 +57,8 @@ int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
 
 static int fsl_pq_mdio_reset(struct mii_dev *bus)
 {
-	struct tsec_mii_mng *regs = bus->priv;
+	struct tsec_mii_mng __iomem *regs =
+		(struct tsec_mii_mng __iomem *)bus->priv;
 
 	/* Reset MII (due to new addresses) */
 	out_be32(&regs->miimcfg, MIIMCFG_RESET_MGMT);
@@ -72,7 +73,8 @@ static int fsl_pq_mdio_reset(struct mii_dev *bus)
 
 int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum)
 {
-	struct tsec_mii_mng *phyregs = bus->priv;
+	struct tsec_mii_mng __iomem *phyregs =
+		(struct tsec_mii_mng __iomem *)bus->priv;
 
 	return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum);
 }
@@ -80,7 +82,8 @@ int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum)
 int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
 			u16 value)
 {
-	struct tsec_mii_mng *phyregs = bus->priv;
+	struct tsec_mii_mng __iomem *phyregs =
+		(struct tsec_mii_mng __iomem *)bus->priv;
 
 	tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value);
 
@@ -101,7 +104,7 @@ int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info)
 	bus->reset = fsl_pq_mdio_reset;
 	sprintf(bus->name, info->name);
 
-	bus->priv = info->regs;
+	bus->priv = (void *)info->regs;
 
 	return mdio_register(bus);
 }
diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c
index 6c901d1..0cd06b6 100644
--- a/drivers/net/mvgbe.c
+++ b/drivers/net/mvgbe.c
@@ -420,8 +420,9 @@ static int mvgbe_init(struct eth_device *dev)
 {
 	struct mvgbe_device *dmvgbe = to_mvgbe(dev);
 	struct mvgbe_registers *regs = dmvgbe->regs;
-#if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \
-	 && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
+#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) &&  \
+	!defined(CONFIG_PHYLIB) &&			 \
+	defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
 	int i;
 #endif
 	/* setup RX rings */
diff --git a/drivers/net/npe/Makefile b/drivers/net/npe/Makefile
index 7fa5ea6..0779255 100644
--- a/drivers/net/npe/Makefile
+++ b/drivers/net/npe/Makefile
@@ -8,9 +8,8 @@
 LOCAL_CFLAGS  += -I$(TOPDIR)/drivers/net/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB -D__linux
 CFLAGS  += $(LOCAL_CFLAGS)
 CPPFLAGS  += $(LOCAL_CFLAGS) # needed for depend
-HOSTCFLAGS  += $(LOCAL_CFLAGS)
 
-obj-$(CONFIG_IXP4XX_NPE) := npe.o \
+obj-y := npe.o \
 	miiphy.o \
 	IxOsalBufferMgt.o \
 	IxOsalIoMem.o \
diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c
index 283cb48..71a3110 100644
--- a/drivers/net/pcnet.c
+++ b/drivers/net/pcnet.c
@@ -89,39 +89,39 @@ static pcnet_priv_t *lp;
 #define PCNET_RESET		0x14
 #define PCNET_BDP		0x16
 
-static u16 pcnet_read_csr (struct eth_device *dev, int index)
+static u16 pcnet_read_csr(struct eth_device *dev, int index)
 {
-	outw (index, dev->iobase + PCNET_RAP);
-	return inw (dev->iobase + PCNET_RDP);
+	outw(index, dev->iobase + PCNET_RAP);
+	return inw(dev->iobase + PCNET_RDP);
 }
 
-static void pcnet_write_csr (struct eth_device *dev, int index, u16 val)
+static void pcnet_write_csr(struct eth_device *dev, int index, u16 val)
 {
-	outw (index, dev->iobase + PCNET_RAP);
-	outw (val, dev->iobase + PCNET_RDP);
+	outw(index, dev->iobase + PCNET_RAP);
+	outw(val, dev->iobase + PCNET_RDP);
 }
 
-static u16 pcnet_read_bcr (struct eth_device *dev, int index)
+static u16 pcnet_read_bcr(struct eth_device *dev, int index)
 {
-	outw (index, dev->iobase + PCNET_RAP);
-	return inw (dev->iobase + PCNET_BDP);
+	outw(index, dev->iobase + PCNET_RAP);
+	return inw(dev->iobase + PCNET_BDP);
 }
 
-static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val)
+static void pcnet_write_bcr(struct eth_device *dev, int index, u16 val)
 {
-	outw (index, dev->iobase + PCNET_RAP);
-	outw (val, dev->iobase + PCNET_BDP);
+	outw(index, dev->iobase + PCNET_RAP);
+	outw(val, dev->iobase + PCNET_BDP);
 }
 
-static void pcnet_reset (struct eth_device *dev)
+static void pcnet_reset(struct eth_device *dev)
 {
-	inw (dev->iobase + PCNET_RESET);
+	inw(dev->iobase + PCNET_RESET);
 }
 
-static int pcnet_check (struct eth_device *dev)
+static int pcnet_check(struct eth_device *dev)
 {
-	outw (88, dev->iobase + PCNET_RAP);
-	return (inw (dev->iobase + PCNET_RAP) == 88);
+	outw(88, dev->iobase + PCNET_RAP);
+	return inw(dev->iobase + PCNET_RAP) == 88;
 }
 
 static int pcnet_init (struct eth_device *dev, bd_t * bis);
@@ -139,63 +139,64 @@ static struct pci_device_id supported[] = {
 };
 
 
-int pcnet_initialize (bd_t * bis)
+int pcnet_initialize(bd_t *bis)
 {
 	pci_dev_t devbusfn;
 	struct eth_device *dev;
 	u16 command, status;
 	int dev_nr = 0;
 
-	PCNET_DEBUG1 ("\npcnet_initialize...\n");
+	PCNET_DEBUG1("\npcnet_initialize...\n");
 
 	for (dev_nr = 0;; dev_nr++) {
 
 		/*
 		 * Find the PCnet PCI device(s).
 		 */
-		if ((devbusfn = pci_find_devices (supported, dev_nr)) < 0) {
+		devbusfn = pci_find_devices(supported, dev_nr);
+		if (devbusfn < 0)
 			break;
-		}
 
 		/*
 		 * Allocate and pre-fill the device structure.
 		 */
-		dev = (struct eth_device *) malloc (sizeof *dev);
+		dev = (struct eth_device *)malloc(sizeof(*dev));
 		if (!dev) {
 			printf("pcnet: Can not allocate memory\n");
 			break;
 		}
 		memset(dev, 0, sizeof(*dev));
-		dev->priv = (void *) devbusfn;
-		sprintf (dev->name, "pcnet#%d", dev_nr);
+		dev->priv = (void *)devbusfn;
+		sprintf(dev->name, "pcnet#%d", dev_nr);
 
 		/*
 		 * Setup the PCI device.
 		 */
-		pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
-				       (unsigned int *) &dev->iobase);
-		dev->iobase=pci_io_to_phys (devbusfn, dev->iobase);
+		pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0,
+				      (unsigned int *)&dev->iobase);
+		dev->iobase = pci_io_to_phys(devbusfn, dev->iobase);
 		dev->iobase &= ~0xf;
 
-		PCNET_DEBUG1 ("%s: devbusfn=0x%x iobase=0x%x: ",
-			      dev->name, devbusfn, dev->iobase);
+		PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ",
+			     dev->name, devbusfn, dev->iobase);
 
 		command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
-		pci_write_config_word (devbusfn, PCI_COMMAND, command);
-		pci_read_config_word (devbusfn, PCI_COMMAND, &status);
+		pci_write_config_word(devbusfn, PCI_COMMAND, command);
+		pci_read_config_word(devbusfn, PCI_COMMAND, &status);
 		if ((status & command) != command) {
-			printf ("%s: Couldn't enable IO access or Bus Mastering\n", dev->name);
-			free (dev);
+			printf("%s: Couldn't enable IO access or Bus Mastering\n",
+			       dev->name);
+			free(dev);
 			continue;
 		}
 
-		pci_write_config_byte (devbusfn, PCI_LATENCY_TIMER, 0x40);
+		pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40);
 
 		/*
 		 * Probe the PCnet chip.
 		 */
-		if (pcnet_probe (dev, bis, dev_nr) < 0) {
-			free (dev);
+		if (pcnet_probe(dev, bis, dev_nr) < 0) {
+			free(dev);
 			continue;
 		}
 
@@ -207,15 +208,15 @@ int pcnet_initialize (bd_t * bis)
 		dev->send = pcnet_send;
 		dev->recv = pcnet_recv;
 
-		eth_register (dev);
+		eth_register(dev);
 	}
 
-	udelay (10 * 1000);
+	udelay(10 * 1000);
 
 	return dev_nr;
 }
 
-static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
+static int pcnet_probe(struct eth_device *dev, bd_t *bis, int dev_nr)
 {
 	int chip_version;
 	char *chipname;
@@ -225,17 +226,17 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
 #endif
 
 	/* Reset the PCnet controller */
-	pcnet_reset (dev);
+	pcnet_reset(dev);
 
 	/* Check if register access is working */
-	if (pcnet_read_csr (dev, 0) != 4 || !pcnet_check (dev)) {
-		printf ("%s: CSR register access check failed\n", dev->name);
+	if (pcnet_read_csr(dev, 0) != 4 || !pcnet_check(dev)) {
+		printf("%s: CSR register access check failed\n", dev->name);
 		return -1;
 	}
 
 	/* Identify the chip */
 	chip_version =
-		pcnet_read_csr (dev, 88) | (pcnet_read_csr (dev, 89) << 16);
+		pcnet_read_csr(dev, 88) | (pcnet_read_csr(dev, 89) << 16);
 	if ((chip_version & 0xfff) != 0x003)
 		return -1;
 	chip_version = (chip_version >> 12) & 0xffff;
@@ -254,12 +255,12 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
 		break;
 #endif
 	default:
-		printf ("%s: PCnet version %#x not supported\n",
-			dev->name, chip_version);
+		printf("%s: PCnet version %#x not supported\n",
+		       dev->name, chip_version);
 		return -1;
 	}
 
-	PCNET_DEBUG1 ("AMD %s\n", chipname);
+	PCNET_DEBUG1("AMD %s\n", chipname);
 
 #ifdef PCNET_HAS_PROM
 	/*
@@ -270,7 +271,7 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
 	for (i = 0; i < 3; i++) {
 		unsigned int val;
 
-		val = pcnet_read_csr (dev, i + 12) & 0x0ffff;
+		val = pcnet_read_csr(dev, i + 12) & 0x0ffff;
 		/* There may be endianness issues here. */
 		dev->enetaddr[2 * i] = val & 0x0ff;
 		dev->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff;
@@ -280,35 +281,40 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
 	return 0;
 }
 
-static int pcnet_init (struct eth_device *dev, bd_t * bis)
+static int pcnet_init(struct eth_device *dev, bd_t *bis)
 {
 	int i, val;
 	u32 addr;
 
-	PCNET_DEBUG1 ("%s: pcnet_init...\n", dev->name);
+	PCNET_DEBUG1("%s: pcnet_init...\n", dev->name);
 
 	/* Switch pcnet to 32bit mode */
-	pcnet_write_bcr (dev, 20, 2);
-
-#ifdef CONFIG_PN62
-	/* Setup LED registers */
-	val = pcnet_read_bcr (dev, 2) | 0x1000;
-	pcnet_write_bcr (dev, 2, val);	/* enable LEDPE */
-	pcnet_write_bcr (dev, 4, 0x5080);	/* 100MBit */
-	pcnet_write_bcr (dev, 5, 0x40c0);	/* LNKSE */
-	pcnet_write_bcr (dev, 6, 0x4090);	/* TX Activity */
-	pcnet_write_bcr (dev, 7, 0x4084);	/* RX Activity */
-#endif
+	pcnet_write_bcr(dev, 20, 2);
 
 	/* Set/reset autoselect bit */
-	val = pcnet_read_bcr (dev, 2) & ~2;
+	val = pcnet_read_bcr(dev, 2) & ~2;
 	val |= 2;
-	pcnet_write_bcr (dev, 2, val);
+	pcnet_write_bcr(dev, 2, val);
 
 	/* Enable auto negotiate, setup, disable fd */
-	val = pcnet_read_bcr (dev, 32) & ~0x98;
+	val = pcnet_read_bcr(dev, 32) & ~0x98;
 	val |= 0x20;
-	pcnet_write_bcr (dev, 32, val);
+	pcnet_write_bcr(dev, 32, val);
+
+	/*
+	 * Enable NOUFLO on supported controllers, with the transmit
+	 * start point set to the full packet. This will cause entire
+	 * packets to be buffered by the ethernet controller before
+	 * transmission, eliminating underflows which are common on
+	 * slower devices. Controllers which do not support NOUFLO will
+	 * simply be left with a larger transmit FIFO threshold.
+	 */
+	val = pcnet_read_bcr(dev, 18);
+	val |= 1 << 11;
+	pcnet_write_bcr(dev, 18, val);
+	val = pcnet_read_csr(dev, 80);
+	val |= 0x3 << 10;
+	pcnet_write_csr(dev, 80, val);
 
 	/*
 	 * We only maintain one structure because the drivers will never
@@ -316,12 +322,12 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis)
 	 * must be aligned on 16-byte boundaries.
 	 */
 	if (lp == NULL) {
-		addr = (u32) malloc (sizeof (pcnet_priv_t) + 0x10);
+		addr = (u32)malloc(sizeof(pcnet_priv_t) + 0x10);
 		addr = (addr + 0xf) & ~0xf;
-		lp = (pcnet_priv_t *) addr;
+		lp = (pcnet_priv_t *)addr;
 	}
 
-	lp->init_block.mode = cpu_to_le16 (0x0000);
+	lp->init_block.mode = cpu_to_le16(0x0000);
 	lp->init_block.filter[0] = 0x00000000;
 	lp->init_block.filter[1] = 0x00000000;
 
@@ -330,9 +336,9 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis)
 	 */
 	lp->cur_rx = 0;
 	for (i = 0; i < RX_RING_SIZE; i++) {
-		lp->rx_ring[i].base = PCI_TO_MEM_LE (dev, lp->rx_buf[i]);
-		lp->rx_ring[i].buf_length = cpu_to_le16 (-PKT_BUF_SZ);
-		lp->rx_ring[i].status = cpu_to_le16 (0x8000);
+		lp->rx_ring[i].base = PCI_TO_MEM_LE(dev, lp->rx_buf[i]);
+		lp->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ);
+		lp->rx_ring[i].status = cpu_to_le16(0x8000);
 		PCNET_DEBUG1
 			("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", i,
 			 lp->rx_ring[i].base, lp->rx_ring[i].buf_length,
@@ -352,48 +358,49 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis)
 	/*
 	 * Setup Init Block.
 	 */
-	PCNET_DEBUG1 ("Init block at 0x%p: MAC", &lp->init_block);
+	PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->init_block);
 
 	for (i = 0; i < 6; i++) {
 		lp->init_block.phys_addr[i] = dev->enetaddr[i];
-		PCNET_DEBUG1 (" %02x", lp->init_block.phys_addr[i]);
+		PCNET_DEBUG1(" %02x", lp->init_block.phys_addr[i]);
 	}
 
-	lp->init_block.tlen_rlen = cpu_to_le16 (TX_RING_LEN_BITS |
-						RX_RING_LEN_BITS);
-	lp->init_block.rx_ring = PCI_TO_MEM_LE (dev, lp->rx_ring);
-	lp->init_block.tx_ring = PCI_TO_MEM_LE (dev, lp->tx_ring);
+	lp->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS |
+					       RX_RING_LEN_BITS);
+	lp->init_block.rx_ring = PCI_TO_MEM_LE(dev, lp->rx_ring);
+	lp->init_block.tx_ring = PCI_TO_MEM_LE(dev, lp->tx_ring);
+	flush_dcache_range((unsigned long)lp, (unsigned long)&lp->rx_buf);
 
-	PCNET_DEBUG1 ("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
-		      lp->init_block.tlen_rlen,
-		      lp->init_block.rx_ring, lp->init_block.tx_ring);
+	PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
+		     lp->init_block.tlen_rlen,
+		     lp->init_block.rx_ring, lp->init_block.tx_ring);
 
 	/*
 	 * Tell the controller where the Init Block is located.
 	 */
-	addr = PCI_TO_MEM (dev, &lp->init_block);
-	pcnet_write_csr (dev, 1, addr & 0xffff);
-	pcnet_write_csr (dev, 2, (addr >> 16) & 0xffff);
+	addr = PCI_TO_MEM(dev, &lp->init_block);
+	pcnet_write_csr(dev, 1, addr & 0xffff);
+	pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff);
 
-	pcnet_write_csr (dev, 4, 0x0915);
-	pcnet_write_csr (dev, 0, 0x0001);	/* start */
+	pcnet_write_csr(dev, 4, 0x0915);
+	pcnet_write_csr(dev, 0, 0x0001);	/* start */
 
 	/* Wait for Init Done bit */
 	for (i = 10000; i > 0; i--) {
-		if (pcnet_read_csr (dev, 0) & 0x0100)
+		if (pcnet_read_csr(dev, 0) & 0x0100)
 			break;
-		udelay (10);
+		udelay(10);
 	}
 	if (i <= 0) {
-		printf ("%s: TIMEOUT: controller init failed\n", dev->name);
-		pcnet_reset (dev);
+		printf("%s: TIMEOUT: controller init failed\n", dev->name);
+		pcnet_reset(dev);
 		return -1;
 	}
 
 	/*
 	 * Finally start network controller operation.
 	 */
-	pcnet_write_csr (dev, 0, 0x0002);
+	pcnet_write_csr(dev, 0, 0x0002);
 
 	return 0;
 }
@@ -403,20 +410,25 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
 	int i, status;
 	struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx];
 
-	PCNET_DEBUG2 ("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len,
-		      packet);
+	PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len,
+		     packet);
+
+	flush_dcache_range((unsigned long)packet,
+			   (unsigned long)packet + pkt_len);
 
 	/* Wait for completion by testing the OWN bit */
 	for (i = 1000; i > 0; i--) {
-		status = le16_to_cpu (entry->status);
+		invalidate_dcache_range((unsigned long)entry,
+					(unsigned long)entry + sizeof(*entry));
+		status = le16_to_cpu(entry->status);
 		if ((status & 0x8000) == 0)
 			break;
-		udelay (100);
-		PCNET_DEBUG2 (".");
+		udelay(100);
+		PCNET_DEBUG2(".");
 	}
 	if (i <= 0) {
-		printf ("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
-			dev->name, lp->cur_tx, status);
+		printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
+		       dev->name, lp->cur_tx, status);
 		pkt_len = 0;
 		goto failure;
 	}
@@ -426,19 +438,21 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
 	 * set the status with the "ownership" bits last.
 	 */
 	status = 0x8300;
-	entry->length = le16_to_cpu (-pkt_len);
+	entry->length = cpu_to_le16(-pkt_len);
 	entry->misc = 0x00000000;
-	entry->base = PCI_TO_MEM_LE (dev, packet);
-	entry->status = le16_to_cpu (status);
+	entry->base = PCI_TO_MEM_LE(dev, packet);
+	entry->status = cpu_to_le16(status);
+	flush_dcache_range((unsigned long)entry,
+			   (unsigned long)entry + sizeof(*entry));
 
 	/* Trigger an immediate send poll. */
-	pcnet_write_csr (dev, 0, 0x0008);
+	pcnet_write_csr(dev, 0, 0x0008);
 
       failure:
 	if (++lp->cur_tx >= TX_RING_SIZE)
 		lp->cur_tx = 0;
 
-	PCNET_DEBUG2 ("done\n");
+	PCNET_DEBUG2("done\n");
 	return pkt_len;
 }
 
@@ -450,43 +464,49 @@ static int pcnet_recv (struct eth_device *dev)
 
 	while (1) {
 		entry = &lp->rx_ring[lp->cur_rx];
+		invalidate_dcache_range((unsigned long)entry,
+					(unsigned long)entry + sizeof(*entry));
 		/*
 		 * If we own the next entry, it's a new packet. Send it up.
 		 */
-		if (((status = le16_to_cpu (entry->status)) & 0x8000) != 0) {
+		status = le16_to_cpu(entry->status);
+		if ((status & 0x8000) != 0)
 			break;
-		}
 		status >>= 8;
 
 		if (status != 0x03) {	/* There was an error. */
-
-			printf ("%s: Rx%d", dev->name, lp->cur_rx);
-			PCNET_DEBUG1 (" (status=0x%x)", status);
+			printf("%s: Rx%d", dev->name, lp->cur_rx);
+			PCNET_DEBUG1(" (status=0x%x)", status);
 			if (status & 0x20)
-				printf (" Frame");
+				printf(" Frame");
 			if (status & 0x10)
-				printf (" Overflow");
+				printf(" Overflow");
 			if (status & 0x08)
-				printf (" CRC");
+				printf(" CRC");
 			if (status & 0x04)
-				printf (" Fifo");
-			printf (" Error\n");
-			entry->status &= le16_to_cpu (0x03ff);
+				printf(" Fifo");
+			printf(" Error\n");
+			entry->status &= le16_to_cpu(0x03ff);
 
 		} else {
-
-			pkt_len =
-				(le32_to_cpu (entry->msg_length) & 0xfff) - 4;
+			pkt_len = (le32_to_cpu(entry->msg_length) & 0xfff) - 4;
 			if (pkt_len < 60) {
-				printf ("%s: Rx%d: invalid packet length %d\n", dev->name, lp->cur_rx, pkt_len);
+				printf("%s: Rx%d: invalid packet length %d\n",
+				       dev->name, lp->cur_rx, pkt_len);
 			} else {
-				NetReceive (lp->rx_buf[lp->cur_rx], pkt_len);
-				PCNET_DEBUG2 ("Rx%d: %d bytes from 0x%p\n",
-					      lp->cur_rx, pkt_len,
-					      lp->rx_buf[lp->cur_rx]);
+				invalidate_dcache_range(
+					(unsigned long)lp->rx_buf[lp->cur_rx],
+					(unsigned long)lp->rx_buf[lp->cur_rx] +
+					pkt_len);
+				NetReceive(lp->rx_buf[lp->cur_rx], pkt_len);
+				PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n",
+					     lp->cur_rx, pkt_len,
+					     lp->rx_buf[lp->cur_rx]);
 			}
 		}
-		entry->status |= cpu_to_le16 (0x8000);
+		entry->status |= cpu_to_le16(0x8000);
+		flush_dcache_range((unsigned long)entry,
+				   (unsigned long)entry + sizeof(*entry));
 
 		if (++lp->cur_rx >= RX_RING_SIZE)
 			lp->cur_rx = 0;
@@ -494,22 +514,21 @@ static int pcnet_recv (struct eth_device *dev)
 	return pkt_len;
 }
 
-static void pcnet_halt (struct eth_device *dev)
+static void pcnet_halt(struct eth_device *dev)
 {
 	int i;
 
-	PCNET_DEBUG1 ("%s: pcnet_halt...\n", dev->name);
+	PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name);
 
 	/* Reset the PCnet controller */
-	pcnet_reset (dev);
+	pcnet_reset(dev);
 
 	/* Wait for Stop bit */
 	for (i = 1000; i > 0; i--) {
-		if (pcnet_read_csr (dev, 0) & 0x4)
+		if (pcnet_read_csr(dev, 0) & 0x4)
 			break;
-		udelay (10);
-	}
-	if (i <= 0) {
-		printf ("%s: TIMEOUT: controller reset failed\n", dev->name);
+		udelay(10);
 	}
+	if (i <= 0)
+		printf("%s: TIMEOUT: controller reset failed\n", dev->name);
 }
diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c
index 0f2dfd6..b20b4df 100644
--- a/drivers/net/phy/atheros.c
+++ b/drivers/net/phy/atheros.c
@@ -40,7 +40,7 @@ static int ar8035_config(struct phy_device *phydev)
 static struct phy_driver AR8021_driver =  {
 	.name = "AR8021",
 	.uid = 0x4dd040,
-	.mask = 0xfffff0,
+	.mask = 0x4fffff,
 	.features = PHY_GBIT_FEATURES,
 	.config = ar8021_config,
 	.startup = genphy_startup,
@@ -48,11 +48,11 @@ static struct phy_driver AR8021_driver =  {
 };
 
 static struct phy_driver AR8031_driver =  {
-	.name = "AR8031",
+	.name = "AR8031/AR8033",
 	.uid = 0x4dd074,
-	.mask = 0xfffff0,
+	.mask = 0x4fffff,
 	.features = PHY_GBIT_FEATURES,
-	.config = genphy_config,
+	.config = ar8021_config,
 	.startup = genphy_startup,
 	.shutdown = genphy_shutdown,
 };
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index a7450f8..5d7e3be 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -100,6 +100,19 @@ int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum)
 	return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR);
 }
 
+
+static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr,
+			      int regnum)
+{
+	return ksz9021_phy_extended_read(phydev, regnum);
+}
+
+static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr,
+			       int devaddr, int regnum, u16 val)
+{
+	return ksz9021_phy_extended_write(phydev, regnum, val);
+}
+
 /* Micrel ksz9021 */
 static int ksz9021_config(struct phy_device *phydev)
 {
@@ -131,6 +144,8 @@ static struct phy_driver ksz9021_driver = {
 	.config = &ksz9021_config,
 	.startup = &ksz90xx_startup,
 	.shutdown = &genphy_shutdown,
+	.writeext = &ksz9021_phy_extwrite,
+	.readext = &ksz9021_phy_extread,
 };
 #endif
 
@@ -171,14 +186,31 @@ int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr,
 	return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA);
 }
 
+static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr,
+			       int regnum)
+{
+	return ksz9031_phy_extended_read(phydev, devaddr, regnum,
+					 MII_KSZ9031_MOD_DATA_NO_POST_INC);
+};
+
+static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr,
+				int devaddr, int regnum, u16 val)
+{
+	return ksz9031_phy_extended_write(phydev, devaddr, regnum,
+					 MII_KSZ9031_MOD_DATA_POST_INC_RW, val);
+};
+
+
 static struct phy_driver ksz9031_driver = {
 	.name = "Micrel ksz9031",
 	.uid  = 0x221620,
-	.mask = 0xfffffe,
+	.mask = 0xfffff0,
 	.features = PHY_GBIT_FEATURES,
 	.config   = &genphy_config,
 	.startup  = &ksz90xx_startup,
 	.shutdown = &genphy_shutdown,
+	.writeext = &ksz9031_phy_extwrite,
+	.readext = &ksz9031_phy_extread,
 };
 
 int phy_micrel_init(void)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 62925bb..c691fbb 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -275,13 +275,14 @@ int genphy_parse_link(struct phy_device *phydev)
 	int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
 
 	/* We're using autonegotiation */
-	if (mii_reg & BMSR_ANEGCAPABLE) {
+	if (phydev->supported & SUPPORTED_Autoneg) {
 		u32 lpa = 0;
 		int gblpa = 0;
 		u32 estatus = 0;
 
 		/* Check for gigabit capability */
-		if (mii_reg & BMSR_ERCAP) {
+		if (phydev->supported & (SUPPORTED_1000baseT_Full |
+					SUPPORTED_1000baseT_Half)) {
 			/* We want a list of states supported by
 			 * both PHYs in the link
 			 */
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index ddbbc35..a3ace68 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -102,7 +102,7 @@ static int rtl8211x_startup(struct phy_device *phydev)
 static struct phy_driver RTL8211B_driver = {
 	.name = "RealTek RTL8211B",
 	.uid = 0x1cc910,
-	.mask = 0xfffff0,
+	.mask = 0xffffff,
 	.features = PHY_GBIT_FEATURES,
 	.config = &rtl8211x_config,
 	.startup = &rtl8211x_startup,
@@ -113,7 +113,7 @@ static struct phy_driver RTL8211B_driver = {
 static struct phy_driver RTL8211E_driver = {
 	.name = "RealTek RTL8211E",
 	.uid = 0x1cc915,
-	.mask = 0xfffff0,
+	.mask = 0xffffff,
 	.features = PHY_GBIT_FEATURES,
 	.config = &rtl8211x_config,
 	.startup = &rtl8211x_startup,
@@ -124,7 +124,7 @@ static struct phy_driver RTL8211E_driver = {
 static struct phy_driver RTL8211DN_driver = {
 	.name = "RealTek RTL8211DN",
 	.uid = 0x1cc914,
-	.mask = 0xfffff0,
+	.mask = 0xffffff,
 	.features = PHY_GBIT_FEATURES,
 	.config = &rtl8211x_config,
 	.startup = &rtl8211x_startup,
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 60ed92d..bfd9815 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -12,6 +12,7 @@
  */
 #include <miiphy.h>
 
+/* This code does not check the partner abilities. */
 static int smsc_parse_status(struct phy_device *phydev)
 {
 	int mii_reg;
@@ -64,7 +65,7 @@ static struct phy_driver lan8710_driver = {
 	.mask = 0xffff0,
 	.features = PHY_BASIC_FEATURES,
 	.config = &genphy_config_aneg,
-	.startup = &smsc_startup,
+	.startup = &genphy_startup,
 	.shutdown = &genphy_shutdown,
 };
 
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 5cf103e..c555979 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -49,6 +49,15 @@
 #define MIIM_VSC8574_18G_QSGMII		0x80e0
 #define MIIM_VSC8574_18G_CMDSTAT	0x8000
 
+/* Vitesse VSC8514 control register */
+#define MIIM_VSC8514_GENERAL18		0x12
+#define MIIM_VSC8514_GENERAL19		0x13
+#define MIIM_VSC8514_GENERAL23		0x17
+
+/* Vitesse VSC8514 gerenal purpose register 18 */
+#define MIIM_VSC8514_18G_QSGMII		0x80e0
+#define MIIM_VSC8514_18G_CMDSTAT	0x8000
+
 /* CIS8201 */
 static int vitesse_config(struct phy_device *phydev)
 {
@@ -148,7 +157,7 @@ static int vsc8601_config(struct phy_device *phydev)
 static int vsc8574_config(struct phy_device *phydev)
 {
 	u32 val;
-	/* configure regiser 19G for MAC */
+	/* configure register 19G for MAC */
 	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
 		  PHY_EXT_PAGE_ACCESS_GENERAL);
 
@@ -188,6 +197,53 @@ static int vsc8574_config(struct phy_device *phydev)
 	return 0;
 }
 
+static int vsc8514_config(struct phy_device *phydev)
+{
+	u32 val;
+	int timeout = 1000000;
+
+	/* configure register to access 19G */
+	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
+		  PHY_EXT_PAGE_ACCESS_GENERAL);
+
+	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19);
+	if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
+		/* set bit 15:14 to '01' for QSGMII mode */
+		val = (val & 0x3fff) | (1 << 14);
+		phy_write(phydev, MDIO_DEVAD_NONE,
+			  MIIM_VSC8514_GENERAL19, val);
+		/* Enable 4 ports MAC QSGMII */
+		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18,
+			  MIIM_VSC8514_18G_QSGMII);
+	} else {
+		/*TODO Add SGMII functionality once spec sheet
+		 * for VSC8514 defines complete functionality
+		 */
+	}
+
+	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
+	/* When bit 15 is cleared the command has completed */
+	while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--)
+		val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
+
+	if (0 == timeout) {
+		printf("PHY 8514 config failed\n");
+		return -1;
+	}
+
+	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
+
+	/* configure register to access 23 */
+	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23);
+	/* set bits 10:8 to '000' */
+	val = (val & 0xf8ff);
+	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val);
+
+	genphy_config_aneg(phydev);
+
+	return 0;
+}
+
 static struct phy_driver VSC8211_driver = {
 	.name	= "Vitesse VSC8211",
 	.uid	= 0xfc4b0,
@@ -238,6 +294,16 @@ static struct phy_driver VSC8574_driver = {
 	.shutdown = &genphy_shutdown,
 };
 
+static struct phy_driver VSC8514_driver = {
+	.name = "Vitesse VSC8514",
+	.uid = 0x70570,
+	.mask = 0xffff0,
+	.features = PHY_GBIT_FEATURES,
+	.config = &vsc8514_config,
+	.startup = &vitesse_startup,
+	.shutdown = &genphy_shutdown,
+};
+
 static struct phy_driver VSC8601_driver = {
 	.name = "Vitesse VSC8601",
 	.uid = 0x70420,
@@ -298,6 +364,7 @@ int phy_vitesse_init(void)
 	phy_register(&VSC8211_driver);
 	phy_register(&VSC8221_driver);
 	phy_register(&VSC8574_driver);
+	phy_register(&VSC8514_driver);
 	phy_register(&VSC8662_driver);
 	phy_register(&cis8201_driver);
 	phy_register(&cis8204_driver);
diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c
index 4186699..208ce5c 100644
--- a/drivers/net/rtl8139.c
+++ b/drivers/net/rtl8139.c
@@ -188,7 +188,7 @@ static int rtl_transmit(struct eth_device *dev, void *packet, int length);
 static int rtl_poll(struct eth_device *dev);
 static void rtl_disable(struct eth_device *dev);
 #ifdef CONFIG_MCAST_TFTP/*  This driver already accepts all b/mcast */
-static int rtl_bcast_addr (struct eth_device *dev, u8 bcast_mac, u8 set)
+static int rtl_bcast_addr(struct eth_device *dev, const u8 *bcast_mac, u8 set)
 {
 	return (0);
 }
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 13fa9c0..d040ab1 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -246,6 +246,8 @@ static struct {
 	{"RTL-8169sc/8110sc",	0x18, 0xff7e1880,},
 	{"RTL-8168b/8111sb",	0x30, 0xff7e1880,},
 	{"RTL-8168b/8111sb",	0x38, 0xff7e1880,},
+	{"RTL-8168d/8111d",	0x28, 0xff7e1880,},
+	{"RTL-8168evl/8111evl",	0x2e, 0xff7e1880,},
 	{"RTL-8101e",		0x34, 0xff7e1880,},
 	{"RTL-8100e",		0x32, 0xff7e1880,},
 };
@@ -314,6 +316,7 @@ static const unsigned int rtl8169_rx_config =
 
 static struct pci_device_id supported[] = {
 	{PCI_VENDOR_ID_REALTEK, 0x8167},
+	{PCI_VENDOR_ID_REALTEK, 0x8168},
 	{PCI_VENDOR_ID_REALTEK, 0x8169},
 	{}
 };
@@ -394,6 +397,50 @@ match:
 	return 0;
 }
 
+/*
+ * Cache maintenance functions. These are simple wrappers around the more
+ * general purpose flush_cache() and invalidate_dcache_range() functions.
+ */
+
+static void rtl_inval_rx_desc(struct RxDesc *desc)
+{
+	unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
+	unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN);
+
+	invalidate_dcache_range(start, end);
+}
+
+static void rtl_flush_rx_desc(struct RxDesc *desc)
+{
+	flush_cache((unsigned long)desc, sizeof(*desc));
+}
+
+static void rtl_inval_tx_desc(struct TxDesc *desc)
+{
+	unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
+	unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN);
+
+	invalidate_dcache_range(start, end);
+}
+
+static void rtl_flush_tx_desc(struct TxDesc *desc)
+{
+	flush_cache((unsigned long)desc, sizeof(*desc));
+}
+
+static void rtl_inval_buffer(void *buf, size_t size)
+{
+	unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1);
+	unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN);
+
+	invalidate_dcache_range(start, end);
+}
+
+static void rtl_flush_buffer(void *buf, size_t size)
+{
+	flush_cache((unsigned long)buf, size);
+}
+
 /**************************************************************************
 RECV - Receive a frame
 ***************************************************************************/
@@ -411,14 +458,16 @@ static int rtl_recv(struct eth_device *dev)
 	ioaddr = dev->iobase;
 
 	cur_rx = tpc->cur_rx;
-	flush_cache((unsigned long)&tpc->RxDescArray[cur_rx],
-			sizeof(struct RxDesc));
+
+	rtl_inval_rx_desc(&tpc->RxDescArray[cur_rx]);
+
 	if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) {
 		if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) {
 			unsigned char rxdata[RX_BUF_LEN];
 			length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx].
 						status) & 0x00001FFF) - 4;
 
+			rtl_inval_buffer(tpc->RxBufferRing[cur_rx], length);
 			memcpy(rxdata, tpc->RxBufferRing[cur_rx], length);
 			NetReceive(rxdata, length);
 
@@ -430,8 +479,7 @@ static int rtl_recv(struct eth_device *dev)
 					cpu_to_le32(OWNbit + RX_BUF_SIZE);
 			tpc->RxDescArray[cur_rx].buf_addr =
 				cpu_to_le32(bus_to_phys(tpc->RxBufferRing[cur_rx]));
-			flush_cache((unsigned long)tpc->RxBufferRing[cur_rx],
-					RX_BUF_SIZE);
+			rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]);
 		} else {
 			puts("Error Rx");
 		}
@@ -473,7 +521,7 @@ static int rtl_send(struct eth_device *dev, void *packet, int length)
 	/* point to the current txb incase multiple tx_rings are used */
 	ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE];
 	memcpy(ptxb, (char *)packet, (int)length);
-	flush_cache((unsigned long)ptxb, length);
+	rtl_flush_buffer(ptxb, length);
 
 	while (len < ETH_ZLEN)
 		ptxb[len++] = '\0';
@@ -489,20 +537,20 @@ static int rtl_send(struct eth_device *dev, void *packet, int length)
 			cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) |
 				    ((len > ETH_ZLEN) ? len : ETH_ZLEN));
 	}
+	rtl_flush_tx_desc(&tpc->TxDescArray[entry]);
 	RTL_W8(TxPoll, 0x40);	/* set polling bit */
 
 	tpc->cur_tx++;
 	to = currticks() + TX_TIMEOUT;
 	do {
-		flush_cache((unsigned long)&tpc->TxDescArray[entry],
-				sizeof(struct TxDesc));
+		rtl_inval_tx_desc(&tpc->TxDescArray[entry]);
 	} while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit)
 				&& (currticks() < to));	/* wait */
 
 	if (currticks() >= to) {
 #ifdef DEBUG_RTL8169_TX
-		puts ("tx timeout/error\n");
-		printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+		puts("tx timeout/error\n");
+		printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
 #endif
 		ret = 0;
 	} else {
@@ -604,7 +652,7 @@ static void rtl8169_hw_start(struct eth_device *dev)
 	RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
 
 #ifdef DEBUG_RTL8169
-	printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+	printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
 #endif
 }
 
@@ -638,11 +686,11 @@ static void rtl8169_init_ring(struct eth_device *dev)
 		tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
 		tpc->RxDescArray[i].buf_addr =
 			cpu_to_le32(bus_to_phys(tpc->RxBufferRing[i]));
-		flush_cache((unsigned long)tpc->RxBufferRing[i], RX_BUF_SIZE);
+		rtl_flush_rx_desc(&tpc->RxDescArray[i]);
 	}
 
 #ifdef DEBUG_RTL8169
-	printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+	printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
 #endif
 }
 
@@ -683,7 +731,7 @@ static int rtl_reset(struct eth_device *dev, bd_t *bis)
 	txb[5] = dev->enetaddr[5];
 
 #ifdef DEBUG_RTL8169
-	printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
+	printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
 #endif
 	return 0;
 }
@@ -869,11 +917,25 @@ int rtl8169_initialize(bd_t *bis)
 	int idx=0;
 
 	while(1){
+		unsigned int region;
+		u16 device;
+
 		/* Find RTL8169 */
 		if ((devno = pci_find_devices(supported, idx++)) < 0)
 			break;
 
-		pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+		pci_read_config_word(devno, PCI_DEVICE_ID, &device);
+		switch (device) {
+		case 0x8168:
+			region = 2;
+			break;
+
+		default:
+			region = 1;
+			break;
+		}
+
+		pci_read_config_dword(devno, PCI_BASE_ADDRESS_0 + (region * 4), &iobase);
 		iobase &= ~0xf;
 
 		debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index d5a83e0..5e132f2 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -4,6 +4,7 @@
  * Copyright (C) 2008, 2011 Renesas Solutions Corp.
  * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu
  * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
+ * Copyright (C) 2013  Renesas Electronics Corporation
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -25,13 +26,31 @@
 #ifndef CONFIG_SH_ETHER_PHY_ADDR
 # error "Please define CONFIG_SH_ETHER_PHY_ADDR"
 #endif
-#ifdef CONFIG_SH_ETHER_CACHE_WRITEBACK
-#define flush_cache_wback(addr, len)	\
-			dcache_wback_range((u32)addr, (u32)(addr + len - 1))
+
+#if defined(CONFIG_SH_ETHER_CACHE_WRITEBACK) && !defined(CONFIG_SYS_DCACHE_OFF)
+#define flush_cache_wback(addr, len)    \
+		flush_dcache_range((u32)addr, (u32)(addr + len - 1))
 #else
 #define flush_cache_wback(...)
 #endif
 
+#if defined(CONFIG_SH_ETHER_CACHE_INVALIDATE) && defined(CONFIG_ARM)
+#define invalidate_cache(addr, len)		\
+	{	\
+		u32 line_size = CONFIG_SH_ETHER_ALIGNE_SIZE;	\
+		u32 start, end;	\
+		\
+		start = (u32)addr;	\
+		end = start + len;	\
+		start &= ~(line_size - 1);	\
+		end = ((end + line_size - 1) & ~(line_size - 1));	\
+		\
+		invalidate_dcache_range(start, end);	\
+	}
+#else
+#define invalidate_cache(...)
+#endif
+
 #define TIMEOUT_CNT 1000
 
 int sh_eth_send(struct eth_device *dev, void *packet, int len)
@@ -69,8 +88,11 @@ int sh_eth_send(struct eth_device *dev, void *packet, int len)
 
 	/* Wait until packet is transmitted */
 	timeout = TIMEOUT_CNT;
-	while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--)
+	do {
+		invalidate_cache(port_info->tx_desc_cur,
+				 sizeof(struct tx_desc_s));
 		udelay(100);
+	} while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--);
 
 	if (timeout < 0) {
 		printf(SHETHER_NAME ": transmit timeout\n");
@@ -94,12 +116,14 @@ int sh_eth_recv(struct eth_device *dev)
 	uchar *packet;
 
 	/* Check if the rx descriptor is ready */
+	invalidate_cache(port_info->rx_desc_cur, sizeof(struct rx_desc_s));
 	if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) {
 		/* Check for errors */
 		if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) {
 			len = port_info->rx_desc_cur->rd1 & 0xffff;
 			packet = (uchar *)
 				ADDR_TO_P2(port_info->rx_desc_cur->rd2);
+			invalidate_cache(packet, len);
 			NetReceive(packet, len);
 		}
 
@@ -108,7 +132,6 @@ int sh_eth_recv(struct eth_device *dev)
 			port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE;
 		else
 			port_info->rx_desc_cur->rd0 = RD_RACT;
-
 		/* Point to the next descriptor */
 		port_info->rx_desc_cur++;
 		if (port_info->rx_desc_cur >=
@@ -237,15 +260,17 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
 	 * Allocate rx data buffers. They must be 32 bytes aligned  and in
 	 * P2 area
 	 */
-	port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE + 31);
+	port_info->rx_buf_malloc = malloc(
+		NUM_RX_DESC * MAX_BUF_SIZE + RX_BUF_ALIGNE_SIZE - 1);
 	if (!port_info->rx_buf_malloc) {
 		printf(SHETHER_NAME ": malloc failed\n");
 		ret = -ENOMEM;
 		goto err_buf_malloc;
 	}
 
-	tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) &
-			  ~(32 - 1));
+	tmp_addr = (u32)(((int)port_info->rx_buf_malloc
+			  + (RX_BUF_ALIGNE_SIZE - 1)) &
+			  ~(RX_BUF_ALIGNE_SIZE - 1));
 	port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr);
 
 	/* Initialize all descriptors */
@@ -351,8 +376,9 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
 	struct phy_device *phy;
 
 	/* Configure e-dmac registers */
-	sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) | EDMR_EL,
-		     EDMR);
+	sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) |
+			(EMDR_DESC | EDMR_EL), EDMR);
+
 	sh_eth_write(eth, 0, EESIPR);
 	sh_eth_write(eth, 0, TRSCER);
 	sh_eth_write(eth, 0, TFTR);
@@ -384,6 +410,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
 
 #if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740)
 	sh_eth_write(eth, CONFIG_SH_ETHER_SH7734_MII, RMII_MII);
+#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791)
+	sh_eth_write(eth, sh_eth_read(eth, RMIIMR) | 0x1, RMIIMR);
 #endif
 	/* Configure phy */
 	ret = sh_eth_phy_config(eth);
@@ -407,7 +435,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
 		sh_eth_write(eth, GECMR_100B, GECMR);
 #elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
 		sh_eth_write(eth, 1, RTRATE);
-#elif defined(CONFIG_CPU_SH7724)
+#elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \
+		defined(CONFIG_R8A7791)
 		val = ECMR_RTM;
 #endif
 	} else if (phy->speed == 10) {
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 9ad800e..8aa7109 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -31,6 +31,11 @@
 #define ADDR_TO_P2(addr)	(addr)
 #endif /* defined(CONFIG_SH) */
 
+/* base padding size is 16 */
+#ifndef CONFIG_SH_ETHER_ALIGNE_SIZE
+#define CONFIG_SH_ETHER_ALIGNE_SIZE 16
+#endif
+
 /* Number of supported ports */
 #define MAX_PORT_NUM	2
 
@@ -45,15 +50,16 @@
 
 /* The size of the tx descriptor is determined by how much padding is used.
    4, 20, or 52 bytes of padding can be used */
-#define TX_DESC_PADDING		4
-#define TX_DESC_SIZE		(12 + TX_DESC_PADDING)
+#define TX_DESC_PADDING	(CONFIG_SH_ETHER_ALIGNE_SIZE - 12)
+/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */
+#define TX_DESC_SIZE	(12 + TX_DESC_PADDING)
 
 /* Tx descriptor. We always use 3 bytes of padding */
 struct tx_desc_s {
 	volatile u32 td0;
 	u32 td1;
 	u32 td2;		/* Buffer start */
-	u32 padding;
+	u8 padding[TX_DESC_PADDING];	/* aligned cache line size */
 };
 
 /* There is no limitation in the number of rx descriptors */
@@ -61,15 +67,18 @@ struct tx_desc_s {
 
 /* The size of the rx descriptor is determined by how much padding is used.
    4, 20, or 52 bytes of padding can be used */
-#define RX_DESC_PADDING		4
+#define RX_DESC_PADDING	(CONFIG_SH_ETHER_ALIGNE_SIZE - 12)
+/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */
 #define RX_DESC_SIZE		(12 + RX_DESC_PADDING)
+/* aligned cache line size */
+#define RX_BUF_ALIGNE_SIZE	(CONFIG_SH_ETHER_ALIGNE_SIZE > 32 ? 64 : 32)
 
 /* Rx descriptor. We always use 4 bytes of padding */
 struct rx_desc_s {
 	volatile u32 rd0;
 	volatile u32 rd1;
 	u32 rd2;		/* Buffer start */
-	u32 padding;
+	u8 padding[TX_DESC_PADDING];	/* aligned cache line size */
 };
 
 struct sh_eth_info {
@@ -157,6 +166,7 @@ enum {
 	TLFRCR,
 	CERCR,
 	CEECR,
+	RMIIMR, /* R8A7790 */
 	MAFCR,
 	RTRATE,
 	CSMR,
@@ -263,6 +273,7 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {
 	[RMCR]	= 0x0058,
 	[TFUCR]	= 0x0064,
 	[RFOCR]	= 0x0068,
+	[RMIIMR] = 0x006C,
 	[FCFTR]	= 0x0070,
 	[RPADIR]	= 0x0078,
 	[TRIMD]	= 0x007c,
@@ -290,6 +301,9 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {
 #elif defined(CONFIG_R8A7740)
 #define SH_ETH_TYPE_GETHER
 #define BASE_IO_ADDR	0xE9A00000
+#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791)
+#define SH_ETH_TYPE_ETHER
+#define BASE_IO_ADDR	0xEE700200
 #endif
 
 /*
@@ -320,6 +334,14 @@ enum DMAC_M_BIT {
 #endif
 };
 
+#if CONFIG_SH_ETHER_ALIGNE_SIZE == 64
+# define EMDR_DESC EDMR_DL1
+#elif CONFIG_SH_ETHER_ALIGNE_SIZE == 32
+# define EMDR_DESC EDMR_DL0
+#elif CONFIG_SH_ETHER_ALIGNE_SIZE == 16 /* Default */
+# define EMDR_DESC 0
+#endif
+
 /* RFLR */
 #define RFLR_RFL_MIN	0x05EE	/* Recv Frame length 1518 byte */
 
@@ -485,6 +507,8 @@ enum FELIC_MODE_BIT {
 	ECMR_PRM = 0x00000001,
 #ifdef CONFIG_CPU_SH7724
 	ECMR_RTM = 0x00000010,
+#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791)
+	ECMR_RTM = 0x00000004,
 #endif
 
 };
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index f5e314b..e9138f0 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -5,7 +5,7 @@
  * terms of the GNU Public License, Version 2, incorporated
  * herein by reference.
  *
- * Copyright 2004-2011 Freescale Semiconductor, Inc.
+ * Copyright 2004-2011, 2013 Freescale Semiconductor, Inc.
  * (C) Copyright 2003, Motorola, Inc.
  * author Andy Fleming
  *
@@ -25,21 +25,13 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define TX_BUF_CNT		2
 
-static uint rxIdx;		/* index of the current RX buffer */
-static uint txIdx;		/* index of the current TX buffer */
-
-typedef volatile struct rtxbd {
-	txbd8_t txbd[TX_BUF_CNT];
-	rxbd8_t rxbd[PKTBUFSRX];
-} RTXBD;
-
-#define MAXCONTROLLERS	(8)
-
-static struct tsec_private *privlist[MAXCONTROLLERS];
-static int num_tsecs = 0;
+static uint rx_idx;		/* index of the current RX buffer */
+static uint tx_idx;		/* index of the current TX buffer */
 
 #ifdef __GNUC__
-static RTXBD rtx __attribute__ ((aligned(8)));
+static struct txbd8 __iomem txbd[TX_BUF_CNT] __aligned(8);
+static struct rxbd8 __iomem rxbd[PKTBUFSRX] __aligned(8);
+
 #else
 #error "rtx must be 64-bit aligned"
 #endif
@@ -57,7 +49,7 @@ static struct tsec_info_struct tsec_info[] = {
 #endif
 #ifdef CONFIG_MPC85XX_FEC
 	{
-		.regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000),
+		.regs = TSEC_GET_REGS(2, 0x2000),
 		.devname = CONFIG_MPC85XX_FEC_NAME,
 		.phyaddr = FEC_PHY_ADDR,
 		.flags = FEC_FLAGS,
@@ -113,32 +105,31 @@ static void tsec_configure_serdes(struct tsec_private *priv)
  * result.
  * 2) Use the 8 most significant bits as a hash into a 256-entry
  * table.  The table is controlled through 8 32-bit registers:
- * gaddr0-7.  gaddr0's MSB is entry 0, and gaddr7's LSB is
- * gaddr7.  This means that the 3 most significant bits in the
+ * gaddr0-7.  gaddr0's MSB is entry 0, and gaddr7's LSB is entry
+ * 255.  This means that the 3 most significant bits in the
  * hash index which gaddr register to use, and the 5 other bits
  * indicate which bit (assuming an IBM numbering scheme, which
- * for PowerPC (tm) is usually the case) in the tregister holds
+ * for PowerPC (tm) is usually the case) in the register holds
  * the entry. */
 static int
-tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set)
+tsec_mcast_addr(struct eth_device *dev, const u8 *mcast_mac, u8 set)
 {
-	struct tsec_private *priv = privlist[1];
-	volatile tsec_t *regs = priv->regs;
-	volatile u32  *reg_array, value;
-	u8 result, whichbit, whichreg;
-
-	result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff);
-	whichbit = result & 0x1f;	/* the 5 LSB = which bit to set */
-	whichreg = result >> 5;		/* the 3 MSB = which reg to set it in */
-	value = (1 << (31-whichbit));
-
-	reg_array = &(regs->hash.gaddr0);
-
-	if (set) {
-		reg_array[whichreg] |= value;
-	} else {
-		reg_array[whichreg] &= ~value;
-	}
+	struct tsec_private *priv = (struct tsec_private *)dev->priv;
+	struct tsec __iomem *regs = priv->regs;
+	u32 result, value;
+	u8 whichbit, whichreg;
+
+	result = ether_crc(MAC_ADDR_LEN, mcast_mac);
+	whichbit = (result >> 24) & 0x1f; /* the 5 LSB = which bit to set */
+	whichreg = result >> 29; /* the 3 MSB = which reg to set it in */
+
+	value = 1 << (31-whichbit);
+
+	if (set)
+		setbits_be32(&regs->hash.gaddr0 + whichreg, value);
+	else
+		clrbits_be32(&regs->hash.gaddr0 + whichreg, value);
+
 	return 0;
 }
 #endif /* Multicast TFTP ? */
@@ -147,7 +138,7 @@ tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set)
  * those we don't care about (unless zero is bad, in which case,
  * choose a more appropriate value)
  */
-static void init_registers(tsec_t *regs)
+static void init_registers(struct tsec __iomem *regs)
 {
 	/* Clear IEVENT */
 	out_be32(&regs->ievent, IEVENT_INIT_CLEAR);
@@ -175,7 +166,7 @@ static void init_registers(tsec_t *regs)
 	out_be32(&regs->rctrl, 0x00000000);
 
 	/* Init RMON mib registers */
-	memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t));
+	memset((void *)&regs->rmon, 0, sizeof(regs->rmon));
 
 	out_be32(&regs->rmon.cam1, 0xffffffff);
 	out_be32(&regs->rmon.cam2, 0xffffffff);
@@ -194,7 +185,7 @@ static void init_registers(tsec_t *regs)
  */
 static void adjust_link(struct tsec_private *priv, struct phy_device *phydev)
 {
-	tsec_t *regs = priv->regs;
+	struct tsec __iomem *regs = priv->regs;
 	u32 ecntrl, maccfg2;
 
 	if (!phydev->link) {
@@ -248,7 +239,7 @@ static void adjust_link(struct tsec_private *priv, struct phy_device *phydev)
 void redundant_init(struct eth_device *dev)
 {
 	struct tsec_private *priv = dev->priv;
-	tsec_t *regs = priv->regs;
+	struct tsec __iomem *regs = priv->regs;
 	uint t, count = 0;
 	int fail = 1;
 	static const u8 pkt[] = {
@@ -281,23 +272,26 @@ void redundant_init(struct eth_device *dev)
 	clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
 
 	do {
+		uint16_t status;
 		tsec_send(dev, (void *)pkt, sizeof(pkt));
 
 		/* Wait for buffer to be received */
-		for (t = 0; rtx.rxbd[rxIdx].status & RXBD_EMPTY; t++) {
+		for (t = 0; in_be16(&rxbd[rx_idx].status) & RXBD_EMPTY; t++) {
 			if (t >= 10 * TOUT_LOOP) {
 				printf("%s: tsec: rx error\n", dev->name);
 				break;
 			}
 		}
 
-		if (!memcmp(pkt, (void *)NetRxPackets[rxIdx], sizeof(pkt)))
+		if (!memcmp(pkt, (void *)NetRxPackets[rx_idx], sizeof(pkt)))
 			fail = 0;
 
-		rtx.rxbd[rxIdx].length = 0;
-		rtx.rxbd[rxIdx].status =
-		    RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
-		rxIdx = (rxIdx + 1) % PKTBUFSRX;
+		out_be16(&rxbd[rx_idx].length, 0);
+		status = RXBD_EMPTY;
+		if ((rx_idx + 1) == PKTBUFSRX)
+			status |= RXBD_WRAP;
+		out_be16(&rxbd[rx_idx].status, status);
+		rx_idx = (rx_idx + 1) % PKTBUFSRX;
 
 		if (in_be32(&regs->ievent) & IEVENT_BSY) {
 			out_be32(&regs->ievent, IEVENT_BSY);
@@ -325,36 +319,39 @@ void redundant_init(struct eth_device *dev)
  */
 static void startup_tsec(struct eth_device *dev)
 {
-	int i;
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	tsec_t *regs = priv->regs;
+	struct tsec __iomem *regs = priv->regs;
+	uint16_t status;
+	int i;
 
 	/* reset the indices to zero */
-	rxIdx = 0;
-	txIdx = 0;
+	rx_idx = 0;
+	tx_idx = 0;
 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
 	uint svr;
 #endif
 
 	/* Point to the buffer descriptors */
-	out_be32(&regs->tbase, (unsigned int)(&rtx.txbd[txIdx]));
-	out_be32(&regs->rbase, (unsigned int)(&rtx.rxbd[rxIdx]));
+	out_be32(&regs->tbase, (u32)&txbd[0]);
+	out_be32(&regs->rbase, (u32)&rxbd[0]);
 
 	/* Initialize the Rx Buffer descriptors */
 	for (i = 0; i < PKTBUFSRX; i++) {
-		rtx.rxbd[i].status = RXBD_EMPTY;
-		rtx.rxbd[i].length = 0;
-		rtx.rxbd[i].bufPtr = (uint) NetRxPackets[i];
+		out_be16(&rxbd[i].status, RXBD_EMPTY);
+		out_be16(&rxbd[i].length, 0);
+		out_be32(&rxbd[i].bufptr, (u32)NetRxPackets[i]);
 	}
-	rtx.rxbd[PKTBUFSRX - 1].status |= RXBD_WRAP;
+	status = in_be16(&rxbd[PKTBUFSRX - 1].status);
+	out_be16(&rxbd[PKTBUFSRX - 1].status, status | RXBD_WRAP);
 
 	/* Initialize the TX Buffer Descriptors */
 	for (i = 0; i < TX_BUF_CNT; i++) {
-		rtx.txbd[i].status = 0;
-		rtx.txbd[i].length = 0;
-		rtx.txbd[i].bufPtr = 0;
+		out_be16(&txbd[i].status, 0);
+		out_be16(&txbd[i].length, 0);
+		out_be32(&txbd[i].bufptr, 0);
 	}
-	rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
+	status = in_be16(&txbd[TX_BUF_CNT - 1].status);
+	out_be16(&txbd[TX_BUF_CNT - 1].status, status | TXBD_WRAP);
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
 	svr = get_svr();
@@ -378,66 +375,67 @@ static void startup_tsec(struct eth_device *dev)
  */
 static int tsec_send(struct eth_device *dev, void *packet, int length)
 {
-	int i;
-	int result = 0;
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	tsec_t *regs = priv->regs;
+	struct tsec __iomem *regs = priv->regs;
+	uint16_t status;
+	int result = 0;
+	int i;
 
 	/* Find an empty buffer descriptor */
-	for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+	for (i = 0; in_be16(&txbd[tx_idx].status) & TXBD_READY; i++) {
 		if (i >= TOUT_LOOP) {
 			debug("%s: tsec: tx buffers full\n", dev->name);
 			return result;
 		}
 	}
 
-	rtx.txbd[txIdx].bufPtr = (uint) packet;
-	rtx.txbd[txIdx].length = length;
-	rtx.txbd[txIdx].status |=
-	    (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
+	out_be32(&txbd[tx_idx].bufptr, (u32)packet);
+	out_be16(&txbd[tx_idx].length, length);
+	status = in_be16(&txbd[tx_idx].status);
+	out_be16(&txbd[tx_idx].status, status |
+		(TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT));
 
 	/* Tell the DMA to go */
 	out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
 
 	/* Wait for buffer to be transmitted */
-	for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
+	for (i = 0; in_be16(&txbd[tx_idx].status) & TXBD_READY; i++) {
 		if (i >= TOUT_LOOP) {
 			debug("%s: tsec: tx error\n", dev->name);
 			return result;
 		}
 	}
 
-	txIdx = (txIdx + 1) % TX_BUF_CNT;
-	result = rtx.txbd[txIdx].status & TXBD_STATS;
+	tx_idx = (tx_idx + 1) % TX_BUF_CNT;
+	result = in_be16(&txbd[tx_idx].status) & TXBD_STATS;
 
 	return result;
 }
 
 static int tsec_recv(struct eth_device *dev)
 {
-	int length;
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	tsec_t *regs = priv->regs;
+	struct tsec __iomem *regs = priv->regs;
 
-	while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
-
-		length = rtx.rxbd[rxIdx].length;
+	while (!(in_be16(&rxbd[rx_idx].status) & RXBD_EMPTY)) {
+		int length = in_be16(&rxbd[rx_idx].length);
+		uint16_t status = in_be16(&rxbd[rx_idx].status);
 
 		/* Send the packet up if there were no errors */
-		if (!(rtx.rxbd[rxIdx].status & RXBD_STATS)) {
-			NetReceive(NetRxPackets[rxIdx], length - 4);
-		} else {
-			printf("Got error %x\n",
-			       (rtx.rxbd[rxIdx].status & RXBD_STATS));
-		}
+		if (!(status & RXBD_STATS))
+			NetReceive(NetRxPackets[rx_idx], length - 4);
+		else
+			printf("Got error %x\n", (status & RXBD_STATS));
 
-		rtx.rxbd[rxIdx].length = 0;
+		out_be16(&rxbd[rx_idx].length, 0);
 
+		status = RXBD_EMPTY;
 		/* Set the wrap bit if this is the last element in the list */
-		rtx.rxbd[rxIdx].status =
-		    RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0);
+		if ((rx_idx + 1) == PKTBUFSRX)
+			status |= RXBD_WRAP;
+		out_be16(&rxbd[rx_idx].status, status);
 
-		rxIdx = (rxIdx + 1) % PKTBUFSRX;
+		rx_idx = (rx_idx + 1) % PKTBUFSRX;
 	}
 
 	if (in_be32(&regs->ievent) & IEVENT_BSY) {
@@ -453,7 +451,7 @@ static int tsec_recv(struct eth_device *dev)
 static void tsec_halt(struct eth_device *dev)
 {
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	tsec_t *regs = priv->regs;
+	struct tsec __iomem *regs = priv->regs;
 
 	clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
 	setbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
@@ -475,11 +473,9 @@ static void tsec_halt(struct eth_device *dev)
  */
 static int tsec_init(struct eth_device *dev, bd_t * bd)
 {
-	uint tempval;
-	char tmpbuf[MAC_ADDR_LEN];
-	int i;
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
-	tsec_t *regs = priv->regs;
+	struct tsec __iomem *regs = priv->regs;
+	u32 tempval;
 	int ret;
 
 	/* Make sure the controller is stopped */
@@ -492,16 +488,16 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
 	out_be32(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
 
 	/* Copy the station address into the address registers.
-	 * Backwards, because little endian MACS are dumb */
-	for (i = 0; i < MAC_ADDR_LEN; i++)
-		tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
-
-	tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) |
-		  tmpbuf[3];
+	 * For a station address of 0x12345678ABCD in transmission
+	 * order (BE), MACnADDR1 is set to 0xCDAB7856 and
+	 * MACnADDR2 is set to 0x34120000.
+	 */
+	tempval = (dev->enetaddr[5] << 24) | (dev->enetaddr[4] << 16) |
+		  (dev->enetaddr[3] << 8)  |  dev->enetaddr[2];
 
 	out_be32(&regs->macstnaddr1, tempval);
 
-	tempval = *((uint *) (tmpbuf + 4));
+	tempval = (dev->enetaddr[1] << 24) | (dev->enetaddr[0] << 16);
 
 	out_be32(&regs->macstnaddr2, tempval);
 
@@ -527,7 +523,7 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
 
 static phy_interface_t tsec_get_interface(struct tsec_private *priv)
 {
-	tsec_t *regs = priv->regs;
+	struct tsec __iomem *regs = priv->regs;
 	u32 ecntrl;
 
 	ecntrl = in_be32(&regs->ecntrl);
@@ -576,7 +572,7 @@ static int init_phy(struct eth_device *dev)
 {
 	struct tsec_private *priv = (struct tsec_private *)dev->priv;
 	struct phy_device *phydev;
-	tsec_t *regs = priv->regs;
+	struct tsec __iomem *regs = priv->regs;
 	u32 supported = (SUPPORTED_10baseT_Half |
 			SUPPORTED_10baseT_Full |
 			SUPPORTED_100baseT_Half |
@@ -626,7 +622,6 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
 	if (NULL == priv)
 		return 0;
 
-	privlist[num_tsecs++] = priv;
 	priv->regs = tsec_info->regs;
 	priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
 
@@ -684,7 +679,7 @@ int tsec_standard_init(bd_t *bis)
 {
 	struct fsl_pq_mdio_info info;
 
-	info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	info.regs = TSEC_GET_MDIO_REGS_BASE(1);
 	info.name = DEFAULT_MII_NAME;
 
 	fsl_pq_mdio_init(bis, &info);
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 236a753..6a017a8 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -43,11 +43,6 @@
 #define ZYNQ_GEM_TXBUF_WRAP_MASK	0x40000000
 #define ZYNQ_GEM_TXBUF_LAST_MASK	0x00008000 /* Last buffer */
 
-#define ZYNQ_GEM_TXSR_HRESPNOK_MASK	0x00000100 /* Transmit hresp not OK */
-#define ZYNQ_GEM_TXSR_URUN_MASK		0x00000040 /* Transmit underrun */
-/* Transmit buffs exhausted mid frame */
-#define ZYNQ_GEM_TXSR_BUFEXH_MASK	0x00000010
-
 #define ZYNQ_GEM_NWCTRL_TXEN_MASK	0x00000008 /* Enable transmit */
 #define ZYNQ_GEM_NWCTRL_RXEN_MASK	0x00000004 /* Enable receive */
 #define ZYNQ_GEM_NWCTRL_MDEN_MASK	0x00000010 /* Enable MDIO port */
@@ -90,6 +85,11 @@
  */
 #define PHY_DETECT_MASK 0x1808
 
+/* TX BD status masks */
+#define ZYNQ_GEM_TXBUF_FRMLEN_MASK	0x000007ff
+#define ZYNQ_GEM_TXBUF_EXHAUSTED	0x08000000
+#define ZYNQ_GEM_TXBUF_UNDERRUN		0x10000000
+
 /* Device registers */
 struct zynq_gem_regs {
 	u32 nwctrl; /* Network Control reg */
@@ -123,12 +123,18 @@ struct emac_bd {
 };
 
 #define RX_BUF 3
+/* Page table entries are set to 1MB, or multiples of 1MB
+ * (not < 1MB). driver uses less bd's so use 1MB bdspace.
+ */
+#define BD_SPACE	0x100000
+/* BD separation space */
+#define BD_SEPRN_SPACE	64
 
 /* Initialized, rxbd_current, rx_first_buf must be 0 after init */
 struct zynq_gem_priv {
-	struct emac_bd tx_bd;
-	struct emac_bd rx_bd[RX_BUF];
-	char rxbuffers[RX_BUF * PKTSIZE_ALIGN];
+	struct emac_bd *tx_bd;
+	struct emac_bd *rx_bd;
+	char *rxbuffers;
 	u32 rxbd_current;
 	u32 rx_first_buf;
 	int phyaddr;
@@ -299,20 +305,18 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 			readl(&regs->stat[i]);
 
 		/* Setup RxBD space */
-		memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd));
-		/* Create the RxBD ring */
-		memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers));
+		memset(priv->rx_bd, 0, RX_BUF * sizeof(struct emac_bd));
 
 		for (i = 0; i < RX_BUF; i++) {
 			priv->rx_bd[i].status = 0xF0000000;
 			priv->rx_bd[i].addr =
-					(u32)((char *)&(priv->rxbuffers) +
+					((u32)(priv->rxbuffers) +
 							(i * PKTSIZE_ALIGN));
 		}
 		/* WRAP bit to last BD */
 		priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK;
 		/* Write RxBDs to IP */
-		writel((u32)&(priv->rx_bd), &regs->rxqbase);
+		writel((u32)priv->rx_bd, &regs->rxqbase);
 
 		/* Setup for DMA Configuration register */
 		writel(ZYNQ_GEM_DMACR_INIT, &regs->dmacr);
@@ -368,32 +372,35 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 
 static int zynq_gem_send(struct eth_device *dev, void *ptr, int len)
 {
-	u32 status;
+	u32 addr, size;
 	struct zynq_gem_priv *priv = dev->priv;
 	struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase;
-	const u32 mask = ZYNQ_GEM_TXSR_HRESPNOK_MASK | \
-			ZYNQ_GEM_TXSR_URUN_MASK | ZYNQ_GEM_TXSR_BUFEXH_MASK;
 
 	/* setup BD */
-	writel((u32)&(priv->tx_bd), &regs->txqbase);
+	writel((u32)priv->tx_bd, &regs->txqbase);
 
 	/* Setup Tx BD */
-	memset((void *)&(priv->tx_bd), 0, sizeof(struct emac_bd));
+	memset(priv->tx_bd, 0, sizeof(struct emac_bd));
+
+	priv->tx_bd->addr = (u32)ptr;
+	priv->tx_bd->status = (len & ZYNQ_GEM_TXBUF_FRMLEN_MASK) |
+				ZYNQ_GEM_TXBUF_LAST_MASK;
 
-	priv->tx_bd.addr = (u32)ptr;
-	priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK;
+	addr = (u32) ptr;
+	addr &= ~(ARCH_DMA_MINALIGN - 1);
+	size = roundup(len, ARCH_DMA_MINALIGN);
+	flush_dcache_range(addr, addr + size);
+	barrier();
 
 	/* Start transmit */
 	setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_STARTTX_MASK);
 
-	/* Read the stat register to know if the packet has been transmitted */
-	status = readl(&regs->txsr);
-	if (status & mask)
-		printf("Something has gone wrong here!? Status is 0x%x.\n",
-		       status);
+	/* Read TX BD status */
+	if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_UNDERRUN)
+		printf("TX underrun\n");
+	if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_EXHAUSTED)
+		printf("TX buffers exhausted in mid frame\n");
 
-	/* Clear Tx status register before leaving . */
-	writel(status, &regs->txsr);
 	return 0;
 }
 
@@ -416,8 +423,12 @@ static int zynq_gem_recv(struct eth_device *dev)
 
 	frame_len = current_bd->status & ZYNQ_GEM_RXBUF_LEN_MASK;
 	if (frame_len) {
-		NetReceive((u8 *) (current_bd->addr &
-					ZYNQ_GEM_RXBUF_ADD_MASK), frame_len);
+		u32 addr = current_bd->addr & ZYNQ_GEM_RXBUF_ADD_MASK;
+		addr &= ~(ARCH_DMA_MINALIGN - 1);
+		u32 size = roundup(frame_len, ARCH_DMA_MINALIGN);
+		invalidate_dcache_range(addr, addr + size);
+
+		NetReceive((u8 *)addr, frame_len);
 
 		if (current_bd->status & ZYNQ_GEM_RXBUF_SOF_MASK)
 			priv->rx_first_buf = priv->rxbd_current;
@@ -471,6 +482,7 @@ int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio)
 {
 	struct eth_device *dev;
 	struct zynq_gem_priv *priv;
+	void *bd_space;
 
 	dev = calloc(1, sizeof(*dev));
 	if (dev == NULL)
@@ -483,6 +495,18 @@ int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio)
 	}
 	priv = dev->priv;
 
+	/* Align rxbuffers to ARCH_DMA_MINALIGN */
+	priv->rxbuffers = memalign(ARCH_DMA_MINALIGN, RX_BUF * PKTSIZE_ALIGN);
+	memset(priv->rxbuffers, 0, RX_BUF * PKTSIZE_ALIGN);
+
+	/* Align bd_space to 1MB */
+	bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
+	mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE, DCACHE_OFF);
+
+	/* Initialize the bd spaces for tx and rx bd's */
+	priv->tx_bd = (struct emac_bd *)bd_space;
+	priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE);
+
 	priv->phyaddr = phy_addr;
 	priv->emio = emio;
 
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 99d51a6..6182a59 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
 obj-$(CONFIG_PCI) += pci.o pci_auto.o
 obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o
 obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o
+obj-$(CONFIG_PCI_MSC01) += pci_msc01.o
 obj-$(CONFIG_FTPCI100) += pci_ftpci100.o
 obj-$(CONFIG_IXP_PCI) += pci_ixp.o
 obj-$(CONFIG_SH4_PCI) += pci_sh4.o
diff --git a/drivers/pci/pci_msc01.c b/drivers/pci/pci_msc01.c
new file mode 100644
index 0000000..284ffa0
--- /dev/null
+++ b/drivers/pci/pci_msc01.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <msc01.h>
+#include <pci.h>
+#include <pci_msc01.h>
+#include <asm/io.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+struct msc01_pci_controller {
+	struct pci_controller hose;
+	void *base;
+};
+
+static inline struct msc01_pci_controller *
+hose_to_msc01(struct pci_controller *hose)
+{
+	return container_of(hose, struct msc01_pci_controller, hose);
+}
+
+static int msc01_config_access(struct msc01_pci_controller *msc01,
+			       unsigned char access_type, pci_dev_t bdf,
+			       int where, u32 *data)
+{
+	const u32 aborts = MSC01_PCI_INTSTAT_MA_MSK | MSC01_PCI_INTSTAT_TA_MSK;
+	void *intstat = msc01->base + MSC01_PCI_INTSTAT_OFS;
+	void *cfgdata = msc01->base + MSC01_PCI_CFGDATA_OFS;
+	unsigned int bus = PCI_BUS(bdf);
+	unsigned int dev = PCI_DEV(bdf);
+	unsigned int devfn = PCI_DEV(bdf) << 3 | PCI_FUNC(bdf);
+
+	/* clear abort status */
+	__raw_writel(aborts, intstat);
+
+	/* setup address */
+	__raw_writel((bus << MSC01_PCI_CFGADDR_BNUM_SHF) |
+		     (dev << MSC01_PCI_CFGADDR_DNUM_SHF) |
+		     (devfn << MSC01_PCI_CFGADDR_FNUM_SHF) |
+		     ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF),
+		     msc01->base + MSC01_PCI_CFGADDR_OFS);
+
+	/* perform access */
+	if (access_type == PCI_ACCESS_WRITE)
+		__raw_writel(*data, cfgdata);
+	else
+		*data = __raw_readl(cfgdata);
+
+	/* check for aborts */
+	if (__raw_readl(intstat) & aborts) {
+		/* clear abort status */
+		__raw_writel(aborts, intstat);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int msc01_read_config_dword(struct pci_controller *hose, pci_dev_t dev,
+				   int where, u32 *value)
+{
+	struct msc01_pci_controller *msc01 = hose_to_msc01(hose);
+
+	*value = 0xffffffff;
+	return msc01_config_access(msc01, PCI_ACCESS_READ, dev, where, value);
+}
+
+static int msc01_write_config_dword(struct pci_controller *hose, pci_dev_t dev,
+				    int where, u32 value)
+{
+	struct msc01_pci_controller *gt = hose_to_msc01(hose);
+	u32 data = value;
+
+	return msc01_config_access(gt, PCI_ACCESS_WRITE, dev, where, &data);
+}
+
+void msc01_pci_init(void *base, unsigned long sys_bus, unsigned long sys_phys,
+		    unsigned long sys_size, unsigned long mem_bus,
+		    unsigned long mem_phys, unsigned long mem_size,
+		    unsigned long io_bus, unsigned long io_phys,
+		    unsigned long io_size)
+{
+	static struct msc01_pci_controller global_msc01;
+	struct msc01_pci_controller *msc01;
+	struct pci_controller *hose;
+
+	msc01 = &global_msc01;
+	msc01->base = base;
+
+	hose = &msc01->hose;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0;
+
+	/* System memory space */
+	pci_set_region(&hose->regions[0], sys_bus, sys_phys, sys_size,
+		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+	/* PCI memory space */
+	pci_set_region(&hose->regions[1], mem_bus, mem_phys, mem_size,
+		       PCI_REGION_MEM);
+
+	/* PCI I/O space */
+	pci_set_region(&hose->regions[2], io_bus, io_phys, io_size,
+		       PCI_REGION_IO);
+
+	hose->region_count = 3;
+
+	pci_set_ops(hose,
+		    pci_hose_read_config_byte_via_dword,
+		    pci_hose_read_config_word_via_dword,
+		    msc01_read_config_dword,
+		    pci_hose_write_config_byte_via_dword,
+		    pci_hose_write_config_word_via_dword,
+		    msc01_write_config_dword);
+
+	pci_register_hose(hose);
+	hose->last_busno = pci_hose_scan(hose);
+}
diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile
index b8c15f8..7f1bd06 100644
--- a/drivers/qe/Makefile
+++ b/drivers/qe/Makefile
@@ -4,5 +4,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(and $(CONFIG_QE),$(CONFIG_OF_LIBFDT)) += fdt.o
-obj-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o
+obj-y := qe.o uccf.o uec.o uec_phy.o
+obj-$(CONFIG_OF_LIBFDT) += fdt.o
diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index 5f9d359..f7cf106 100644
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -15,7 +15,7 @@
 #include <command.h>
 #include <rtc.h>
 
-#ifdef __I386__
+#if defined(__I386__) || defined(CONFIG_MALTA)
 #include <asm/io.h>
 #define in8(p) inb(p)
 #define out8(p, v) outb(v, p)
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index e80be8e..a3ad056 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -20,8 +20,7 @@
 #include <asm/io.h>
 #include "omap3_spi.h"
 
-#define WORD_LEN	8
-#define SPI_WAIT_TIMEOUT 3000000;
+#define SPI_WAIT_TIMEOUT 3000000
 
 static void spi_reset(struct omap3_spi_slave *ds)
 {
@@ -185,7 +184,7 @@ int spi_claim_bus(struct spi_slave *slave)
 
 	/* wordlength */
 	conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
-	conf |= (WORD_LEN - 1) << 7;
+	conf |= (ds->slave.wordlen - 1) << 7;
 
 	/* set chipselect polarity; manage with FORCE */
 	if (!(ds->mode & SPI_CS_HIGH))
@@ -223,7 +222,7 @@ void spi_release_bus(struct spi_slave *slave)
 	spi_reset(ds);
 }
 
-int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
+int omap3_spi_write(struct spi_slave *slave, unsigned int len, const void *txp,
 		    unsigned long flags)
 {
 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
@@ -234,7 +233,8 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
 	/* Enable the channel */
 	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
 
-	chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+	chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
+	chconf |= (ds->slave.wordlen - 1) << 7;
 	chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
 	chconf |= OMAP3_MCSPI_CHCONF_FORCE;
 	omap3_spi_write_chconf(ds,chconf);
@@ -250,7 +250,13 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
 			}
 		}
 		/* Write the data */
-		writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
+		unsigned int *tx = &ds->regs->channel[ds->slave.cs].tx;
+		if (ds->slave.wordlen > 16)
+			writel(((u32 *)txp)[i], tx);
+		else if (ds->slave.wordlen > 8)
+			writel(((u16 *)txp)[i], tx);
+		else
+			writel(((u8 *)txp)[i], tx);
 	}
 
 	/* wait to finish of transfer */
@@ -268,7 +274,7 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
 	return 0;
 }
 
-int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
+int omap3_spi_read(struct spi_slave *slave, unsigned int len, void *rxp,
 		   unsigned long flags)
 {
 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
@@ -279,7 +285,8 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
 	/* Enable the channel */
 	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
 
-	chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+	chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
+	chconf |= (ds->slave.wordlen - 1) << 7;
 	chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
 	chconf |= OMAP3_MCSPI_CHCONF_FORCE;
 	omap3_spi_write_chconf(ds,chconf);
@@ -302,7 +309,13 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
 			omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
 
 		/* Read the data */
-		rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
+		unsigned int *rx = &ds->regs->channel[ds->slave.cs].rx;
+		if (ds->slave.wordlen > 16)
+			((u32 *)rxp)[i] = readl(rx);
+		else if (ds->slave.wordlen > 8)
+			((u16 *)rxp)[i] = (u16)readl(rx);
+		else
+			((u8 *)rxp)[i] = (u8)readl(rx);
 	}
 
 	if (flags & SPI_XFER_END) {
@@ -314,8 +327,8 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
 }
 
 /*McSPI Transmit Receive Mode*/
-int omap3_spi_txrx(struct spi_slave *slave,
-		unsigned int len, const u8 *txp, u8 *rxp, unsigned long flags)
+int omap3_spi_txrx(struct spi_slave *slave, unsigned int len,
+		   const void *txp, void *rxp, unsigned long flags)
 {
 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
 	int timeout = SPI_WAIT_TIMEOUT;
@@ -327,7 +340,8 @@ int omap3_spi_txrx(struct spi_slave *slave,
 	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
 
 	/*set TRANSMIT-RECEIVE Mode*/
-	chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+	chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK);
+	chconf |= (ds->slave.wordlen - 1) << 7;
 	chconf |= OMAP3_MCSPI_CHCONF_FORCE;
 	omap3_spi_write_chconf(ds,chconf);
 
@@ -344,7 +358,13 @@ int omap3_spi_txrx(struct spi_slave *slave,
 			}
 		}
 		/* Write the data */
-		writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
+		unsigned int *tx = &ds->regs->channel[ds->slave.cs].tx;
+		if (ds->slave.wordlen > 16)
+			writel(((u32 *)txp)[i], tx);
+		else if (ds->slave.wordlen > 8)
+			writel(((u16 *)txp)[i], tx);
+		else
+			writel(((u8 *)txp)[i], tx);
 
 		/*Read: wait for RX containing data (RXS == 1)*/
 		while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
@@ -356,7 +376,13 @@ int omap3_spi_txrx(struct spi_slave *slave,
 			}
 		}
 		/* Read the data */
-		rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
+		unsigned int *rx = &ds->regs->channel[ds->slave.cs].rx;
+		if (ds->slave.wordlen > 16)
+			((u32 *)rxp)[i] = readl(rx);
+		else if (ds->slave.wordlen > 8)
+			((u16 *)rxp)[i] = (u16)readl(rx);
+		else
+			((u8 *)rxp)[i] = (u8)readl(rx);
 	}
 	/* Disable the channel */
 	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
@@ -375,14 +401,17 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 {
 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
 	unsigned int	len;
-	const u8	*txp = dout;
-	u8		*rxp = din;
 	int ret = -1;
 
-	if (bitlen % 8)
+	if (ds->slave.wordlen < 4 || ds->slave.wordlen > 32) {
+		printf("omap3_spi: invalid wordlen %d\n", ds->slave.wordlen);
+		return -1;
+	}
+
+	if (bitlen % ds->slave.wordlen)
 		return -1;
 
-	len = bitlen / 8;
+	len = bitlen / ds->slave.wordlen;
 
 	if (bitlen == 0) {	 /* only change CS */
 		int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
@@ -400,11 +429,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 		ret = 0;
 	} else {
 		if (dout != NULL && din != NULL)
-			ret = omap3_spi_txrx(slave, len, txp, rxp, flags);
+			ret = omap3_spi_txrx(slave, len, dout, din, flags);
 		else if (dout != NULL)
-			ret = omap3_spi_write(slave, len, txp, flags);
+			ret = omap3_spi_write(slave, len, dout, flags);
 		else if (din != NULL)
-			ret = omap3_spi_read(slave, len, rxp, flags);
+			ret = omap3_spi_read(slave, len, din, flags);
 	}
 	return ret;
 }
diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h
index 01537b6..ab7cd84 100644
--- a/drivers/spi/omap3_spi.h
+++ b/drivers/spi/omap3_spi.h
@@ -99,11 +99,11 @@ static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave)
 	return container_of(slave, struct omap3_spi_slave, slave);
 }
 
-int omap3_spi_txrx(struct spi_slave *slave, unsigned int len, const u8 *txp,
-			u8 *rxp, unsigned long flags);
-int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
+int omap3_spi_txrx(struct spi_slave *slave, unsigned int len, const void *txp,
+			void *rxp, unsigned long flags);
+int omap3_spi_write(struct spi_slave *slave, unsigned int len, const void *txp,
 		    unsigned long flags);
-int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
+int omap3_spi_read(struct spi_slave *slave, unsigned int len, void *rxp,
 		   unsigned long flags);
 
 #endif /* _OMAP3_SPI_H_ */
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ea39d1a..b76a26c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -8,6 +8,18 @@
 #include <malloc.h>
 #include <spi.h>
 
+int spi_set_wordlen(struct spi_slave *slave, unsigned int wordlen)
+{
+	if (wordlen == 0 || wordlen > 32) {
+		printf("spi: invalid wordlen %d\n", wordlen);
+		return -1;
+	}
+
+	slave->wordlen = wordlen;
+
+	return 0;
+}
+
 void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
 			 unsigned int cs)
 {
@@ -20,6 +32,7 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
 		slave = (struct spi_slave *)(ptr + offset);
 		slave->bus = bus;
 		slave->cs = cs;
+		slave->wordlen = SPI_DEFAULT_WORDLEN;
 	}
 
 	return ptr;
diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile
index 4b8cbec..2f2353f 100644
--- a/drivers/tpm/Makefile
+++ b/drivers/tpm/Makefile
@@ -3,8 +3,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-$(shell mkdir -p $(obj)slb9635_i2c)
-
 # TODO: Merge tpm_tis_lpc.c with tpm.c
 obj-$(CONFIG_TPM_ATMEL_TWI) += tpm_atmel_twi.o
 obj-$(CONFIG_TPM_TIS_I2C) += tpm.o
diff --git a/drivers/tpm/tis_i2c.c b/drivers/tpm/tis_i2c.c
deleted file mode 100644
index 22554e1..0000000
--- a/drivers/tpm/tis_i2c.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include <config.h>
-#include <common.h>
-#include <fdtdec.h>
-#include <i2c.h>
-#include "slb9635_i2c/tpm.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* TPM configuration */
-struct tpm {
-	int i2c_bus;
-	int slave_addr;
-	char inited;
-	int old_bus;
-} tpm;
-
-
-static int tpm_select(void)
-{
-	int ret;
-
-	tpm.old_bus = i2c_get_bus_num();
-	if (tpm.old_bus != tpm.i2c_bus) {
-		ret = i2c_set_bus_num(tpm.i2c_bus);
-		if (ret) {
-			debug("%s: Fail to set i2c bus %d\n", __func__,
-			      tpm.i2c_bus);
-			return -1;
-		}
-	}
-	return 0;
-}
-
-static int tpm_deselect(void)
-{
-	int ret;
-
-	if (tpm.old_bus != i2c_get_bus_num()) {
-		ret = i2c_set_bus_num(tpm.old_bus);
-		if (ret) {
-			debug("%s: Fail to restore i2c bus %d\n",
-			      __func__, tpm.old_bus);
-			return -1;
-		}
-	}
-	tpm.old_bus = -1;
-	return 0;
-}
-
-/**
- * Decode TPM configuration.
- *
- * @param dev	Returns a configuration of TPM device
- * @return 0 if ok, -1 on error
- */
-static int tpm_decode_config(struct tpm *dev)
-{
-#ifdef CONFIG_OF_CONTROL
-	const void *blob = gd->fdt_blob;
-	int node, parent;
-	int i2c_bus;
-
-	node = fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9635_TPM);
-	if (node < 0) {
-		node = fdtdec_next_compatible(blob, 0,
-					      COMPAT_INFINEON_SLB9645_TPM);
-	}
-	if (node < 0) {
-		debug("%s: Node not found\n", __func__);
-		return -1;
-	}
-	parent = fdt_parent_offset(blob, node);
-	if (parent < 0) {
-		debug("%s: Cannot find node parent\n", __func__);
-		return -1;
-	}
-	i2c_bus = i2c_get_bus_num_fdt(parent);
-	if (i2c_bus < 0)
-		return -1;
-	dev->i2c_bus = i2c_bus;
-	dev->slave_addr = fdtdec_get_addr(blob, node, "reg");
-#else
-	dev->i2c_bus = CONFIG_INFINEON_TPM_I2C_BUS;
-	dev->slave_addr = CONFIG_INFINEON_TPM_I2C_ADDR;
-#endif
-	return 0;
-}
-
-int tis_init(void)
-{
-	if (tpm.inited)
-		return 0;
-
-	if (tpm_decode_config(&tpm))
-		return -1;
-
-	if (tpm_select())
-		return -1;
-
-	/*
-	 * Probe TPM twice; the first probing might fail because TPM is asleep,
-	 * and the probing can wake up TPM.
-	 */
-	if (i2c_probe(tpm.slave_addr) && i2c_probe(tpm.slave_addr)) {
-		debug("%s: fail to probe i2c addr 0x%x\n", __func__,
-		      tpm.slave_addr);
-		return -1;
-	}
-
-	tpm_deselect();
-
-	tpm.inited = 1;
-
-	return 0;
-}
-
-int tis_open(void)
-{
-	int rc;
-
-	if (!tpm.inited)
-		return -1;
-
-	if (tpm_select())
-		return -1;
-
-	rc = tpm_open(tpm.slave_addr);
-
-	tpm_deselect();
-
-	return rc;
-}
-
-int tis_close(void)
-{
-	if (!tpm.inited)
-		return -1;
-
-	if (tpm_select())
-		return -1;
-
-	tpm_close();
-
-	tpm_deselect();
-
-	return 0;
-}
-
-int tis_sendrecv(const uint8_t *sendbuf, size_t sbuf_size,
-		uint8_t *recvbuf, size_t *rbuf_len)
-{
-	int len;
-	uint8_t buf[4096];
-
-	if (!tpm.inited)
-		return -1;
-
-	if (sizeof(buf) < sbuf_size)
-		return -1;
-
-	memcpy(buf, sendbuf, sbuf_size);
-
-	if (tpm_select())
-		return -1;
-
-	len = tpm_transmit(buf, sbuf_size);
-
-	tpm_deselect();
-
-	if (len < 10) {
-		*rbuf_len = 0;
-		return -1;
-	}
-
-	memcpy(recvbuf, buf, len);
-	*rbuf_len = len;
-
-	return 0;
-}
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index fed1c9c..a7f5469 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
 obj-$(CONFIG_L5F31188) += l5f31188.o
 obj-$(CONFIG_MPC8XX_LCD) += mpc8xx_lcd.o
 obj-$(CONFIG_PXA_LCD) += pxa_lcd.o
+obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o
 obj-$(CONFIG_S6E8AX0) += s6e8ax0.o
 obj-$(CONFIG_S6E63D6) += s6e63d6.o
 obj-$(CONFIG_LD9040) += ld9040.o
diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c
index 58a6163..1f18231 100644
--- a/drivers/video/bcm2835.c
+++ b/drivers/video/bcm2835.c
@@ -14,6 +14,8 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Global variables that lcd.c expects to exist */
 vidinfo_t panel_info;
 
+static u32 bcm2835_pitch;
+
 struct msg_query {
 	struct bcm2835_mbox_hdr hdr;
 	struct bcm2835_mbox_tag_physical_w_h physical_w_h;
@@ -30,6 +32,7 @@ struct msg_setup {
 	struct bcm2835_mbox_tag_virtual_offset virtual_offset;
 	struct bcm2835_mbox_tag_overscan overscan;
 	struct bcm2835_mbox_tag_allocate_buffer allocate_buffer;
+	struct bcm2835_mbox_tag_pitch pitch;
 	u32 end_tag;
 };
 
@@ -80,6 +83,7 @@ void lcd_ctrl_init(void *lcdbase)
 	msg_setup->overscan.body.req.right = 0;
 	BCM2835_MBOX_INIT_TAG(&msg_setup->allocate_buffer, ALLOCATE_BUFFER);
 	msg_setup->allocate_buffer.body.req.alignment = 0x100;
+	BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_setup->pitch, GET_PITCH);
 
 	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_setup->hdr);
 	if (ret) {
@@ -90,6 +94,7 @@ void lcd_ctrl_init(void *lcdbase)
 
 	w = msg_setup->physical_w_h.body.resp.width;
 	h = msg_setup->physical_w_h.body.resp.height;
+	bcm2835_pitch = msg_setup->pitch.body.resp.pitch;
 
 	debug("bcm2835: Final resolution is %d x %d\n", w, h);
 
@@ -103,3 +108,9 @@ void lcd_ctrl_init(void *lcdbase)
 void lcd_enable(void)
 {
 }
+
+int lcd_get_size(int *line_length)
+{
+	*line_length = bcm2835_pitch;
+	return *line_length * panel_info.vl_row;
+}
diff --git a/drivers/video/scf0403_lcd.c b/drivers/video/scf0403_lcd.c
new file mode 100644
index 0000000..2bc8bca
--- /dev/null
+++ b/drivers/video/scf0403_lcd.c
@@ -0,0 +1,296 @@
+/*
+ * scf0403.c -- support for DataImage SCF0403 LCD
+ *
+ * Copyright (c) 2013 Adapted from Linux driver:
+ * Copyright (c) 2012 Anders Electronics plc. All Rights Reserved.
+ * Copyright (c) 2012 CompuLab, Ltd
+ *           Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *           Ilya Ledvich <ilya@compulab.co.il>
+ * Inspired by Alberto Panizzo <maramaopercheseimorto@gmail.com> &
+ *	Marek Vasut work in l4f00242t03.c
+ *
+ * U-Boot port: Nikita Kiryanov <nikita@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <spi.h>
+
+struct scf0403_cmd {
+	u16 cmd;
+	u16 *params;
+	int count;
+};
+
+struct scf0403_initseq_entry {
+	struct scf0403_cmd cmd;
+	int delay_ms;
+};
+
+struct scf0403_priv {
+	struct spi_slave *spi;
+	unsigned int reset_gpio;
+	u32 rddid;
+	struct scf0403_initseq_entry *init_seq;
+	int seq_size;
+};
+
+struct scf0403_priv priv;
+
+#define SCF0403852GGU04_ID 0x000080
+
+/* SCF0403526GGU20 model commands parameters */
+static u16 extcmd_params_sn20[]		= {0xff, 0x98, 0x06};
+static u16 spiinttype_params_sn20[]	= {0x60};
+static u16 bc_params_sn20[]		= {
+		0x01, 0x10, 0x61, 0x74, 0x01, 0x01, 0x1B,
+		0x12, 0x71, 0x00, 0x00, 0x00, 0x01, 0x01,
+		0x05, 0x00, 0xFF, 0xF2, 0x01, 0x00, 0x40,
+};
+static u16 bd_params_sn20[] = {0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67};
+static u16 be_params_sn20[] = {
+		0x01, 0x22, 0x22, 0xBA, 0xDC, 0x26, 0x28, 0x22,	0x22,
+};
+static u16 vcom_params_sn20[]		= {0x74};
+static u16 vmesur_params_sn20[]		= {0x7F, 0x0F, 0x00};
+static u16 powerctl_params_sn20[]	= {0x03, 0x0b, 0x00};
+static u16 lvglvolt_params_sn20[]	= {0x08};
+static u16 engsetting_params_sn20[]	= {0x00, 0x00, 0x00, 0x00, 0x00, 0x20};
+static u16 dispfunc_params_sn20[]	= {0xa0};
+static u16 dvddvolt_params_sn20[]	= {0x74};
+static u16 dispinv_params_sn20[]	= {0x00, 0x00, 0x00};
+static u16 panelres_params_sn20[]	= {0x82};
+static u16 framerate_params_sn20[]	= {0x00, 0x13, 0x13};
+static u16 timing_params_sn20[]		= {0x80, 0x05, 0x40, 0x28};
+static u16 powerctl2_params_sn20[]	= {0x17, 0x75, 0x79, 0x20};
+static u16 memaccess_params_sn20[]	= {0x00};
+static u16 pixfmt_params_sn20[]		= {0x66};
+static u16 pgamma_params_sn20[]		= {
+		0x00, 0x03, 0x0b, 0x0c, 0x0e, 0x08, 0xc5, 0x04,
+		0x08, 0x0c, 0x13, 0x11, 0x11, 0x14, 0x0c, 0x10,
+};
+static u16 ngamma_params_sn20[] = {
+		0x00, 0x0d, 0x11, 0x0c, 0x0c, 0x04, 0x76, 0x03,
+		0x08, 0x0b, 0x16, 0x10, 0x0d, 0x16, 0x0a, 0x00,
+};
+static u16 tearing_params_sn20[] = {0x00};
+
+/* SCF0403852GGU04 model commands parameters */
+static u16 memaccess_params_sn04[]	= {0x08};
+static u16 pixfmt_params_sn04[]		= {0x66};
+static u16 modectl_params_sn04[]	= {0x01};
+static u16 dispfunc_params_sn04[]	= {0x22, 0xe2, 0xFF, 0x04};
+static u16 vcom_params_sn04[]		= {0x00, 0x6A};
+static u16 pgamma_params_sn04[]		= {
+		0x00, 0x07, 0x0d, 0x10, 0x13, 0x19, 0x0f, 0x0c,
+		0x05, 0x08, 0x06, 0x13,	0x0f, 0x30, 0x20, 0x1f,
+};
+static u16 ngamma_params_sn04[]		= {
+		0x1F, 0x20, 0x30, 0x0F, 0x13, 0x06, 0x08, 0x05,
+		0x0C, 0x0F, 0x19, 0x13, 0x10, 0x0D, 0x07, 0x00,
+};
+static u16 dispinv_params_sn04[]	= {0x02};
+
+/* Common commands */
+static struct scf0403_cmd scf0403_cmd_slpout	= {0x11, NULL, 0};
+static struct scf0403_cmd scf0403_cmd_dison	= {0x29, NULL, 0};
+
+/* SCF0403852GGU04 init sequence */
+static struct scf0403_initseq_entry scf0403_initseq_sn04[] = {
+	{{0x36, memaccess_params_sn04,	ARRAY_SIZE(memaccess_params_sn04)}, 0},
+	{{0x3A, pixfmt_params_sn04,	ARRAY_SIZE(pixfmt_params_sn04)}, 0},
+	{{0xB6, dispfunc_params_sn04,	ARRAY_SIZE(dispfunc_params_sn04)}, 0},
+	{{0xC5, vcom_params_sn04,	ARRAY_SIZE(vcom_params_sn04)}, 0},
+	{{0xE0, pgamma_params_sn04,	ARRAY_SIZE(pgamma_params_sn04)}, 0},
+	{{0xE1, ngamma_params_sn04,	ARRAY_SIZE(ngamma_params_sn04)}, 20},
+	{{0xB0, modectl_params_sn04,	ARRAY_SIZE(modectl_params_sn04)}, 0},
+	{{0xB4, dispinv_params_sn04,	ARRAY_SIZE(dispinv_params_sn04)}, 100},
+};
+
+/* SCF0403526GGU20 init sequence */
+static struct scf0403_initseq_entry scf0403_initseq_sn20[] = {
+	{{0xff, extcmd_params_sn20,	ARRAY_SIZE(extcmd_params_sn20)}, 0},
+	{{0xba, spiinttype_params_sn20,	ARRAY_SIZE(spiinttype_params_sn20)}, 0},
+	{{0xbc, bc_params_sn20,		ARRAY_SIZE(bc_params_sn20)}, 0},
+	{{0xbd, bd_params_sn20,		ARRAY_SIZE(bd_params_sn20)}, 0},
+	{{0xbe, be_params_sn20,		ARRAY_SIZE(be_params_sn20)}, 0},
+	{{0xc7, vcom_params_sn20,	ARRAY_SIZE(vcom_params_sn20)}, 0},
+	{{0xed, vmesur_params_sn20,	ARRAY_SIZE(vmesur_params_sn20)}, 0},
+	{{0xc0, powerctl_params_sn20,	ARRAY_SIZE(powerctl_params_sn20)}, 0},
+	{{0xfc, lvglvolt_params_sn20,	ARRAY_SIZE(lvglvolt_params_sn20)}, 0},
+	{{0xb6, dispfunc_params_sn20,	ARRAY_SIZE(dispfunc_params_sn20)}, 0},
+	{{0xdf, engsetting_params_sn20,	ARRAY_SIZE(engsetting_params_sn20)}, 0},
+	{{0xf3, dvddvolt_params_sn20,	ARRAY_SIZE(dvddvolt_params_sn20)}, 0},
+	{{0xb4, dispinv_params_sn20,	ARRAY_SIZE(dispinv_params_sn20)}, 0},
+	{{0xf7, panelres_params_sn20,	ARRAY_SIZE(panelres_params_sn20)}, 0},
+	{{0xb1, framerate_params_sn20,	ARRAY_SIZE(framerate_params_sn20)}, 0},
+	{{0xf2, timing_params_sn20,	ARRAY_SIZE(timing_params_sn20)}, 0},
+	{{0xc1, powerctl2_params_sn20,	ARRAY_SIZE(powerctl2_params_sn20)}, 0},
+	{{0x36, memaccess_params_sn20,	ARRAY_SIZE(memaccess_params_sn20)}, 0},
+	{{0x3a, pixfmt_params_sn20,	ARRAY_SIZE(pixfmt_params_sn20)}, 0},
+	{{0xe0, pgamma_params_sn20,	ARRAY_SIZE(pgamma_params_sn20)}, 0},
+	{{0xe1, ngamma_params_sn20,	ARRAY_SIZE(ngamma_params_sn20)}, 0},
+	{{0x35, tearing_params_sn20,	ARRAY_SIZE(tearing_params_sn20)}, 0},
+};
+
+static void scf0403_gpio_reset(unsigned int gpio)
+{
+	if (!gpio_is_valid(gpio))
+		return;
+
+	gpio_set_value(gpio, 1);
+	mdelay(100);
+	gpio_set_value(gpio, 0);
+	mdelay(40);
+	gpio_set_value(gpio, 1);
+	mdelay(100);
+}
+
+static int scf0403_spi_read_rddid(struct spi_slave *spi, u32 *rddid)
+{
+	int error = 0;
+	u8 ids_buf = 0x00;
+	u16 dummy_buf = 0x00;
+	u16 cmd = 0x04;
+
+	error = spi_set_wordlen(spi, 9);
+	if (error)
+		return error;
+
+	/* Here 9 bits required to transmit a command */
+	error = spi_xfer(spi, 9, &cmd, NULL, SPI_XFER_ONCE);
+	if (error)
+		return error;
+
+	/*
+	 * Here 8 + 1 bits required to arrange extra clock cycle
+	 * before the first data bit.
+	 * According to the datasheet - first parameter is the dummy data.
+	 */
+	error = spi_xfer(spi, 9, NULL, &dummy_buf, SPI_XFER_ONCE);
+	if (error)
+		return error;
+
+	error = spi_set_wordlen(spi, 8);
+	if (error)
+		return error;
+
+	/* Read rest of the data */
+	error = spi_xfer(spi, 8, NULL, &ids_buf, SPI_XFER_ONCE);
+	if (error)
+		return error;
+
+	*rddid = ids_buf;
+
+	return 0;
+}
+
+static int scf0403_spi_transfer(struct spi_slave *spi, struct scf0403_cmd *cmd)
+{
+	int i, error;
+	u32 command = cmd->cmd;
+	u32 msg;
+
+	error = spi_set_wordlen(spi, 9);
+	if (error)
+		return error;
+
+	error = spi_xfer(spi, 9, &command, NULL, SPI_XFER_ONCE);
+	if (error)
+		return error;
+
+	for (i = 0; i < cmd->count; i++) {
+		msg = (cmd->params[i] | 0x100);
+		error = spi_xfer(spi, 9, &msg, NULL, SPI_XFER_ONCE);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
+static void scf0403_lcd_init(struct scf0403_priv *priv)
+{
+	int i;
+
+	/* reset LCD */
+	scf0403_gpio_reset(priv->reset_gpio);
+
+	for (i = 0; i < priv->seq_size; i++) {
+		if (scf0403_spi_transfer(priv->spi, &priv->init_seq[i].cmd) < 0)
+			puts("SPI transfer failed\n");
+
+		mdelay(priv->init_seq[i].delay_ms);
+	}
+}
+
+static int scf0403_request_reset_gpio(unsigned gpio)
+{
+	int err = gpio_request(gpio, "lcd reset");
+
+	if (err)
+		return err;
+
+	err = gpio_direction_output(gpio, 0);
+	if (err)
+		gpio_free(gpio);
+
+	return err;
+}
+
+int scf0403_init(int reset_gpio)
+{
+	int error;
+
+	if (gpio_is_valid(reset_gpio)) {
+		error = scf0403_request_reset_gpio(reset_gpio);
+		if (error) {
+			printf("Failed requesting reset GPIO%d: %d\n",
+			       reset_gpio, error);
+			return error;
+		}
+	}
+
+	priv.reset_gpio = reset_gpio;
+	priv.spi = spi_setup_slave(3, 0, 1000000, SPI_MODE_0);
+	error = spi_claim_bus(priv.spi);
+	if (error)
+		goto bus_claim_fail;
+
+	/* reset LCD */
+	scf0403_gpio_reset(reset_gpio);
+
+	error = scf0403_spi_read_rddid(priv.spi, &priv.rddid);
+	if (error) {
+		puts("IDs read failed\n");
+		goto readid_fail;
+	}
+
+	if (priv.rddid == SCF0403852GGU04_ID) {
+		priv.init_seq = scf0403_initseq_sn04;
+		priv.seq_size = ARRAY_SIZE(scf0403_initseq_sn04);
+	} else {
+		priv.init_seq = scf0403_initseq_sn20;
+		priv.seq_size = ARRAY_SIZE(scf0403_initseq_sn20);
+	}
+
+	scf0403_lcd_init(&priv);
+
+	/* Start operation */
+	scf0403_spi_transfer(priv.spi, &scf0403_cmd_dison);
+	mdelay(100);
+	scf0403_spi_transfer(priv.spi, &scf0403_cmd_slpout);
+	spi_release_bus(priv.spi);
+
+	return 0;
+
+readid_fail:
+	spi_release_bus(priv.spi);
+bus_claim_fail:
+	if (gpio_is_valid(priv.reset_gpio))
+		gpio_free(priv.reset_gpio);
+
+	return error;
+}