summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2010-12-22 21:16:17 +0100
committerWolfgang Denk <wd@denx.de>2010-12-22 21:16:17 +0100
commitcdc51c294ad33879c4e57edf4c9d2155381b1d59 (patch)
treefc1c3f2c23a2507e91358a6a6dfa881965bf603f /drivers
parent250ef029844be2cb98635f265359396866d1749f (diff)
parentb8339e2b9f32663411dba0f48e25b23f542d53bc (diff)
downloadu-boot-imx-cdc51c294ad33879c4e57edf4c9d2155381b1d59.zip
u-boot-imx-cdc51c294ad33879c4e57edf4c9d2155381b1d59.tar.gz
u-boot-imx-cdc51c294ad33879c4e57edf4c9d2155381b1d59.tar.bz2
Merge branch 'next' of ../next
Diffstat (limited to 'drivers')
-rw-r--r--drivers/fpga/spartan3.c6
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/mvmfp.c87
-rw-r--r--drivers/mtd/cfi_flash.c61
-rw-r--r--drivers/mtd/nand/nand_base.c21
-rw-r--r--drivers/mtd/nand/nand_ids.c4
-rw-r--r--drivers/mtd/spi/Makefile1
-rw-r--r--drivers/mtd/spi/eon.c275
-rw-r--r--drivers/mtd/spi/spi_flash.c3
-rw-r--r--drivers/mtd/spi/spi_flash_internal.h1
-rw-r--r--drivers/mtd/spi/winbond.c39
-rw-r--r--drivers/net/davinci_emac.c41
-rw-r--r--drivers/power/twl6030.c124
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/pt7c4338.c144
-rw-r--r--drivers/serial/ns16550.c8
-rw-r--r--drivers/serial/serial.c5
-rw-r--r--drivers/serial/serial_pl01x.c50
-rw-r--r--drivers/serial/serial_pl01x.h41
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/omap3_spi.c352
-rw-r--r--drivers/spi/omap3_spi.h117
22 files changed, 1313 insertions, 70 deletions
diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c
index 7a89b56..1dd6f26 100644
--- a/drivers/fpga/spartan3.c
+++ b/drivers/fpga/spartan3.c
@@ -366,6 +366,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
CONFIG_FPGA_DELAY ();
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for INIT to start.\n");
+ if (*fn->abort)
+ (*fn->abort) (cookie);
return FPGA_FAIL;
}
} while (!(*fn->init) (cookie));
@@ -380,6 +382,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
CONFIG_FPGA_DELAY ();
if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */
puts ("** Timeout waiting for INIT to clear.\n");
+ if (*fn->abort)
+ (*fn->abort) (cookie);
return FPGA_FAIL;
}
} while ((*fn->init) (cookie));
@@ -394,6 +398,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
while DONE is low (inactive) */
if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) {
puts ("** CRC error during FPGA load.\n");
+ if (*fn->abort)
+ (*fn->abort) (cookie);
return (FPGA_FAIL);
}
val = data [bytecount ++];
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 398024c..a5fa2b5 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -27,6 +27,7 @@ LIB := $(obj)libgpio.o
COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o
COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
+COBJS-$(CONFIG_MARVELL_MFP) += mvmfp.o
COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o
COBJS-$(CONFIG_PCA953X) += pca953x.o
COBJS-$(CONFIG_S5P) += s5p_gpio.o
diff --git a/drivers/gpio/mvmfp.c b/drivers/gpio/mvmfp.c
new file mode 100644
index 0000000..5646ed4
--- /dev/null
+++ b/drivers/gpio/mvmfp.c
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>,
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <mvmfp.h>
+#include <asm/arch/mfp.h>
+#ifdef CONFIG_ARMADA100
+#include <asm/arch/armada100.h>
+#else
+#error Unsupported SoC...
+#endif
+
+/*
+ * mfp_config
+ *
+ * On most of Marvell SoCs (ex. ARMADA100) there is Multi-Funtion-Pin
+ * configuration registers to configure each GPIO/Function pin on the
+ * SoC.
+ *
+ * This function reads the array of values for
+ * MFPR_X registers and programms them into respective
+ * Multi-Function Pin registers.
+ * It supports - Alternate Function Selection programming.
+ *
+ * Whereas,
+ * The Configureation value is constructed using MFP()
+ * array consists of 32bit values as defined in MFP(xx,xx..) macro
+ */
+void mfp_config(u32 *mfp_cfgs)
+{
+ u32 *p_mfpr = NULL;
+ u32 cfg_val, val;
+
+ do {
+ cfg_val = *mfp_cfgs++;
+ /* exit if End of configuration table detected */
+ if (cfg_val == MFP_EOC)
+ break;
+
+ p_mfpr = (u32 *)(MV_MFPR_BASE
+ + MFP_REG_GET_OFFSET(cfg_val));
+
+ /* Write a mfg register as per configuration */
+ val = 0;
+ if (cfg_val & MFP_AF_FLAG)
+ /* Abstract and program Afternate-Func Selection */
+ val |= cfg_val & MFP_AF_MASK;
+ if (cfg_val & MFP_EDGE_FLAG)
+ /* Abstract and program Edge configuration */
+ val |= cfg_val & MFP_LPM_EDGE_MASK;
+ if (cfg_val & MFP_DRIVE_FLAG)
+ /* Abstract and program Drive configuration */
+ val |= cfg_val & MFP_DRIVE_MASK;
+ if (cfg_val & MFP_PULL_FLAG)
+ /* Abstract and program Pullup/down configuration */
+ val |= cfg_val & MFP_PULL_MASK;
+
+ writel(val, p_mfpr);
+ } while (1);
+ /*
+ * perform a read-back of any MFPR register to make sure the
+ * previous writings are finished
+ */
+ readl(p_mfpr);
+}
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 39c235e..b006884 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -74,6 +74,20 @@ flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
#endif
+/*
+ * 0xffff is an undefined value for the configuration register. When
+ * this value is returned, the configuration register shall not be
+ * written at all (default mode).
+ */
+static u16 cfi_flash_config_reg(int i)
+{
+#ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS
+ return ((u16 [])CONFIG_SYS_CFI_FLASH_CONFIG_REGS)[i];
+#else
+ return 0xffff;
+#endif
+}
+
#if defined(CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
int cfi_flash_num_flash_banks = CONFIG_SYS_MAX_FLASH_BANKS_DETECT;
#endif
@@ -1112,18 +1126,18 @@ static int sector_erased(flash_info_t *info, int i)
{
int k;
int size;
- volatile unsigned long *flash;
+ u32 *flash;
/*
* Check if whole sector is erased
*/
size = flash_sector_size(info, i);
- flash = (volatile unsigned long *) info->start[i];
+ flash = (u32 *)info->start[i];
/* divide by 4 for longword access */
size = size >> 2;
for (k = 0; k < size; k++) {
- if (*flash++ != 0xffffffff)
+ if (flash_read32(flash++) != 0xffffffff)
return 0; /* not erased */
}
@@ -1426,6 +1440,11 @@ int flash_real_protect (flash_info_t * info, long sector, int prot)
#endif
};
+ /*
+ * Flash needs to be in status register read mode for
+ * flash_full_status_check() to work correctly
+ */
+ flash_write_cmd(info, sector, 0, FLASH_CMD_READ_STATUS);
if ((retcode =
flash_full_status_check (info, sector, info->erase_blk_tout,
prot ? "protect" : "unprotect")) == 0) {
@@ -1975,6 +1994,13 @@ ulong flash_get_size (phys_addr_t base, int banknum)
case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_EXTENDED:
case CFI_CMDSET_INTEL_STANDARD:
+ /*
+ * Set flash to read-id mode. Otherwise
+ * reading protected status is not
+ * guaranteed.
+ */
+ flash_write_cmd(info, sect_cnt, 0,
+ FLASH_CMD_READ_ID);
info->protect[sect_cnt] =
flash_isset (info, sect_cnt,
FLASH_OFFSET_PROTECT,
@@ -2021,6 +2047,31 @@ void flash_set_verbose(uint v)
flash_verbose = v;
}
+static void cfi_flash_set_config_reg(u32 base, u16 val)
+{
+#ifdef CONFIG_SYS_CFI_FLASH_CONFIG_REGS
+ /*
+ * Only set this config register if really defined
+ * to a valid value (0xffff is invalid)
+ */
+ if (val == 0xffff)
+ return;
+
+ /*
+ * Set configuration register. Data is "encrypted" in the 16 lower
+ * address bits.
+ */
+ flash_write16(FLASH_CMD_SETUP, (void *)(base + (val << 1)));
+ flash_write16(FLASH_CMD_SET_CR_CONFIRM, (void *)(base + (val << 1)));
+
+ /*
+ * Finally issue reset-command to bring device back to
+ * read-array mode
+ */
+ flash_write16(FLASH_CMD_RESET, (void *)base);
+#endif
+}
+
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
@@ -2044,6 +2095,10 @@ unsigned long flash_init (void)
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
+ /* Optionally write flash configuration register */
+ cfi_flash_set_config_reg(cfi_flash_bank_addr(i),
+ cfi_flash_config_reg(i));
+
if (!flash_detect_legacy(cfi_flash_bank_addr(i), i))
flash_get_size(cfi_flash_bank_addr(i), i);
size += flash_info[i].size;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 21cc5a3..5239c1f 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -439,11 +439,12 @@ void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
+ u32 time_start;
- reset_timer();
+ time_start = get_timer(0);
/* wait until command is processed or timeout occures */
- while (get_timer(0) < timeo) {
+ while (get_timer(time_start) < timeo) {
if (chip->dev_ready)
if (chip->dev_ready(mtd))
break;
@@ -704,6 +705,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
{
unsigned long timeo;
int state = this->state;
+ u32 time_start;
if (state == FL_ERASING)
timeo = (CONFIG_SYS_HZ * 400) / 1000;
@@ -715,10 +717,10 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
else
this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
- reset_timer();
+ time_start = get_timer(0);
while (1) {
- if (get_timer(0) > timeo) {
+ if (get_timer(time_start) > timeo) {
printf("Timeout!");
return 0x01;
}
@@ -732,8 +734,9 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
}
}
#ifdef PPCHAMELON_NAND_TIMER_HACK
- reset_timer();
- while (get_timer(0) < 10);
+ time_start = get_timer(0);
+ while (get_timer(time_start) < 10)
+ ;
#endif /* PPCHAMELON_NAND_TIMER_HACK */
return this->read_byte(mtd);
@@ -2409,11 +2412,11 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
/*
* Get the flash and manufacturer id and lookup if the type is supported
*/
-static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
+static const struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
int busw, int *maf_id)
{
- struct nand_flash_dev *type = NULL;
+ const struct nand_flash_dev *type = NULL;
int i, dev_id, maf_idx;
int tmp_id, tmp_manf;
@@ -2587,7 +2590,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips)
{
int i, busw, nand_maf_id;
struct nand_chip *chip = mtd->priv;
- struct nand_flash_dev *type;
+ const struct nand_flash_dev *type;
/* Get buswidth to select the correct functions */
busw = chip->options & NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 25b22ec..8d7ea76 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -22,7 +22,7 @@
+ 256 256 Byte page size
* 512 512 Byte page size
*/
-struct nand_flash_dev nand_flash_ids[] = {
+const struct nand_flash_dev nand_flash_ids[] = {
#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
{"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
@@ -132,7 +132,7 @@ struct nand_flash_dev nand_flash_ids[] = {
/*
* Manufacturer ID list
*/
-struct nand_manufacturers nand_manuf_ids[] = {
+const struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_TOSHIBA, "Toshiba"},
{NAND_MFR_SAMSUNG, "Samsung"},
{NAND_MFR_FUJITSU, "Fujitsu"},
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 3d607c0..57112af 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -27,6 +27,7 @@ LIB := $(obj)libspi_flash.o
COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o
COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o
+COBJS-$(CONFIG_SPI_FLASH_EON) += eon.o
COBJS-$(CONFIG_SPI_FLASH_MACRONIX) += macronix.o
COBJS-$(CONFIG_SPI_FLASH_SPANSION) += spansion.o
COBJS-$(CONFIG_SPI_FLASH_SST) += sst.o
diff --git a/drivers/mtd/spi/eon.c b/drivers/mtd/spi/eon.c
new file mode 100644
index 0000000..02c3bb9
--- /dev/null
+++ b/drivers/mtd/spi/eon.c
@@ -0,0 +1,275 @@
+/*
+ * (C) Copyright 2010, ucRobotics Inc.
+ * Author: Chong Huang <chuang@ucrobotics.com>
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+/* EN25Q128-specific commands */
+#define CMD_EN25Q128_WREN 0x06 /* Write Enable */
+#define CMD_EN25Q128_WRDI 0x04 /* Write Disable */
+#define CMD_EN25Q128_RDSR 0x05 /* Read Status Register */
+#define CMD_EN25Q128_WRSR 0x01 /* Write Status Register */
+#define CMD_EN25Q128_READ 0x03 /* Read Data Bytes */
+#define CMD_EN25Q128_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */
+#define CMD_EN25Q128_PP 0x02 /* Page Program */
+#define CMD_EN25Q128_SE 0x20 /* Sector Erase */
+#define CMD_EN25Q128_BE 0xd8 /* Block Erase */
+#define CMD_EN25Q128_DP 0xb9 /* Deep Power-down */
+#define CMD_EN25Q128_RES 0xab /* Release from DP, and Read Signature */
+
+#define EON_ID_EN25Q128 0x18
+
+#define EON_SR_WIP (1 << 0) /* Write-in-Progress */
+
+struct eon_spi_flash_params {
+ u8 idcode1;
+ u16 page_size;
+ u16 pages_per_sector;
+ u16 sectors_per_block;
+ u16 nr_sectors;
+ const char *name;
+};
+
+/* spi_flash needs to be first so upper layers can free() it */
+struct eon_spi_flash {
+ struct spi_flash flash;
+ const struct eon_spi_flash_params *params;
+};
+
+static inline struct eon_spi_flash *to_eon_spi_flash(struct spi_flash *flash)
+{
+ return container_of(flash, struct eon_spi_flash, flash);
+}
+
+static const struct eon_spi_flash_params eon_spi_flash_table[] = {
+ {
+ .idcode1 = EON_ID_EN25Q128,
+ .page_size = 256,
+ .pages_per_sector = 16,
+ .sectors_per_block = 16,
+ .nr_sectors = 4096,
+ .name = "EN25Q128",
+ },
+};
+
+static int eon_wait_ready(struct spi_flash *flash, unsigned long timeout)
+{
+ struct spi_slave *spi = flash->spi;
+ unsigned long timebase;
+ int ret;
+ u8 cmd = CMD_EN25Q128_RDSR;
+ u8 status;
+
+ ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
+ if (ret) {
+ debug("SF: Failed to send command %02x: %d\n", cmd, ret);
+ return ret;
+ }
+
+ timebase = get_timer(0);
+ do {
+ ret = spi_xfer(spi, 8, NULL, &status, 0);
+ if (ret)
+ return -1;
+
+ if ((status & EON_SR_WIP) == 0)
+ break;
+
+ } while (get_timer(timebase) < timeout);
+
+ spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
+
+ if ((status & EON_SR_WIP) == 0)
+ return 0;
+
+ /* Timed out */
+ return -1;
+}
+
+static int eon_read_fast(struct spi_flash *flash,
+ u32 offset, size_t len, void *buf)
+{
+ struct eon_spi_flash *eon = to_eon_spi_flash(flash);
+ unsigned long page_addr;
+ unsigned long page_size;
+ u8 cmd[5];
+
+ page_size = eon->params->page_size;
+ page_addr = offset / page_size;
+
+ cmd[0] = CMD_READ_ARRAY_FAST;
+ cmd[1] = page_addr >> 8;
+ cmd[2] = page_addr;
+ cmd[3] = offset % page_size;
+ cmd[4] = 0x00;
+
+ return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
+}
+
+static int eon_write(struct spi_flash *flash,
+ u32 offset, size_t len, const void *buf)
+{
+ struct eon_spi_flash *eon = to_eon_spi_flash(flash);
+ unsigned long page_addr;
+ unsigned long byte_addr;
+ unsigned long page_size;
+ size_t chunk_len;
+ size_t actual;
+ int ret;
+ u8 cmd[4];
+
+ page_size = eon->params->page_size;
+ page_addr = offset / page_size;
+ byte_addr = offset % page_size;
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: Unable to claim SPI bus\n");
+ return ret;
+ }
+
+ ret = 0;
+ for (actual = 0; actual < len; actual += chunk_len) {
+ chunk_len = min(len - actual, page_size - byte_addr);
+
+ cmd[0] = CMD_EN25Q128_PP;
+ cmd[1] = page_addr >> 8;
+ cmd[2] = page_addr;
+ cmd[3] = byte_addr;
+
+ debug
+ ("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %d\n",
+ buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
+
+ ret = spi_flash_cmd(flash->spi, CMD_EN25Q128_WREN, NULL, 0);
+ if (ret < 0) {
+ debug("SF: Enabling Write failed\n");
+ break;
+ }
+
+ ret = spi_flash_cmd_write(flash->spi, cmd, 4,
+ buf + actual, chunk_len);
+ if (ret < 0) {
+ debug("SF: EON Page Program failed\n");
+ break;
+ }
+
+ ret = eon_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+ if (ret < 0) {
+ debug("SF: EON page programming timed out\n");
+ break;
+ }
+
+ page_addr++;
+ byte_addr = 0;
+ }
+
+ debug("SF: EON: Successfully programmed %u bytes @ 0x%x\n",
+ len, offset);
+
+ spi_release_bus(flash->spi);
+ return ret;
+}
+
+int eon_erase(struct spi_flash *flash, u32 offset, size_t len)
+{
+ /* block erase */
+ struct eon_spi_flash *eon = to_eon_spi_flash(flash);
+ unsigned long block_size;
+ size_t actual;
+ int ret;
+ u8 cmd[4];
+
+
+ block_size = eon->params->page_size * eon->params->pages_per_sector
+ * eon->params->sectors_per_block;
+
+ if (offset % block_size || len % block_size) {
+ debug("SF: Erase offset/length not multiple of block size\n");
+ return -1;
+ }
+
+ len /= block_size;
+ cmd[0] = CMD_EN25Q128_BE;
+ cmd[2] = 0x00;
+ cmd[3] = 0x00;
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: Unable to claim SPI bus\n");
+ return ret;
+ }
+
+ ret = 0;
+ for (actual = 0; actual < len; actual++) {
+ cmd[1] = (offset / block_size) + actual;
+ ret = spi_flash_cmd(flash->spi, CMD_EN25Q128_WREN, NULL, 0);
+ if (ret < 0) {
+ debug("SF: Enabling Write failed\n");
+ break;
+ }
+
+ ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
+ if (ret < 0) {
+ debug("SF: EON page erase failed\n");
+ break;
+ }
+
+ ret = eon_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
+ if (ret < 0) {
+ debug("SF: EON page erase timed out\n");
+ break;
+ }
+ }
+
+ debug("SF: EON: Successfully erased %u bytes @ 0x%x\n",
+ len * block_size, offset);
+
+ spi_release_bus(flash->spi);
+ return ret;
+}
+
+struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode)
+{
+ const struct eon_spi_flash_params *params;
+ struct eon_spi_flash *eon;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(eon_spi_flash_table); ++i) {
+ params = &eon_spi_flash_table[i];
+ if (params->idcode1 == idcode[2])
+ break;
+ }
+
+ if (i == ARRAY_SIZE(eon_spi_flash_table)) {
+ debug("SF: Unsupported EON ID %02x\n", idcode[1]);
+ return NULL;
+ }
+
+ eon = malloc(sizeof(*eon));
+ if (!eon) {
+ debug("SF: Failed to allocate memory\n");
+ return NULL;
+ }
+
+ eon->params = params;
+ eon->flash.spi = spi;
+ eon->flash.name = params->name;
+
+ eon->flash.write = eon_write;
+ eon->flash.erase = eon_erase;
+ eon->flash.read = eon_read_fast;
+ eon->flash.size = params->page_size * params->pages_per_sector
+ * params->nr_sectors;
+
+ debug("SF: Detected %s with page size %u, total %u bytes\n",
+ params->name, params->page_size, eon->flash.size);
+
+ return &eon->flash;
+}
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index ab02ef3..b61d219 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -131,6 +131,9 @@ static const struct {
#ifdef CONFIG_SPI_FLASH_ATMEL
{ 0, 0x1f, spi_flash_probe_atmel, },
#endif
+#ifdef CONFIG_SPI_FLASH_EON
+ { 0, 0x1c, spi_flash_probe_eon, },
+#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX
{ 0, 0xc2, spi_flash_probe_macronix, },
#endif
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index 9bc43dd..68dcffb 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -46,6 +46,7 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
/* Manufacturer-specific probe functions */
struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode);
+struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
index de3aeb8..4452355 100644
--- a/drivers/mtd/spi/winbond.c
+++ b/drivers/mtd/spi/winbond.c
@@ -24,11 +24,6 @@
#define CMD_W25_DP 0xb9 /* Deep Power-down */
#define CMD_W25_RES 0xab /* Release from DP, and Read Signature */
-#define WINBOND_ID_W25X16 0x3015
-#define WINBOND_ID_W25X32 0x3016
-#define WINBOND_ID_W25X64 0x3017
-#define WINBOND_ID_W25Q64 0x4017
-
#define WINBOND_SR_WIP (1 << 0) /* Write-in-Progress */
struct winbond_spi_flash_params {
@@ -37,7 +32,7 @@ struct winbond_spi_flash_params {
uint8_t l2_page_size;
uint16_t pages_per_sector;
uint16_t sectors_per_block;
- uint8_t nr_blocks;
+ uint16_t nr_blocks;
const char *name;
};
@@ -55,7 +50,7 @@ to_winbond_spi_flash(struct spi_flash *flash)
static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
{
- .id = WINBOND_ID_W25X16,
+ .id = 0x3015,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
@@ -63,7 +58,7 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
.name = "W25X16",
},
{
- .id = WINBOND_ID_W25X32,
+ .id = 0x3016,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
@@ -71,7 +66,7 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
.name = "W25X32",
},
{
- .id = WINBOND_ID_W25X64,
+ .id = 0x3017,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
@@ -79,13 +74,37 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = {
.name = "W25X64",
},
{
- .id = WINBOND_ID_W25Q64,
+ .id = 0x4015,
+ .l2_page_size = 8,
+ .pages_per_sector = 16,
+ .sectors_per_block = 16,
+ .nr_blocks = 32,
+ .name = "W25Q16",
+ },
+ {
+ .id = 0x4016,
+ .l2_page_size = 8,
+ .pages_per_sector = 16,
+ .sectors_per_block = 16,
+ .nr_blocks = 64,
+ .name = "W25Q32",
+ },
+ {
+ .id = 0x4017,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
.nr_blocks = 128,
.name = "W25Q64",
},
+ {
+ .id = 0x4018,
+ .l2_page_size = 8,
+ .pages_per_sector = 16,
+ .sectors_per_block = 16,
+ .nr_blocks = 256,
+ .name = "W25Q128",
+ },
};
static int winbond_wait_ready(struct spi_flash *flash, unsigned long timeout)
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index e06896f..43a3d79 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -243,8 +243,35 @@ static int gen_get_link_speed(int phy_addr)
{
u_int16_t tmp;
- if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
+ if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) &&
+ (tmp & 0x04)) {
+#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
+ defined(CONFIG_MACH_DAVINCI_DA850_EVM)
+ davinci_eth_phy_read(phy_addr, PHY_ANLPAR, &tmp);
+
+ /* Speed doesn't matter, there is no setting for it in EMAC. */
+ if (tmp & (PHY_ANLPAR_TXFD | PHY_ANLPAR_10FD)) {
+ /* set EMAC for Full Duplex */
+ writel(EMAC_MACCONTROL_MIIEN_ENABLE |
+ EMAC_MACCONTROL_FULLDUPLEX_ENABLE,
+ &adap_emac->MACCONTROL);
+ } else {
+ /*set EMAC for Half Duplex */
+ writel(EMAC_MACCONTROL_MIIEN_ENABLE,
+ &adap_emac->MACCONTROL);
+ }
+
+ if (tmp & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
+ writel(readl(&adap_emac->MACCONTROL) |
+ EMAC_MACCONTROL_RMIISPEED_100,
+ &adap_emac->MACCONTROL);
+ else
+ writel(readl(&adap_emac->MACCONTROL) &
+ ~EMAC_MACCONTROL_RMIISPEED_100,
+ &adap_emac->MACCONTROL);
+#endif
return(1);
+ }
return(0);
}
@@ -326,6 +353,12 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
}
#endif
+#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
+ defined(CONFIG_MACH_DAVINCI_DA850_EVM)
+ adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0;
+ adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0;
+ adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0;
+#endif
rx_desc = emac_rx_desc;
writel(1, &adap_emac->TXCONTROL);
@@ -480,6 +513,12 @@ static void davinci_eth_close(struct eth_device *dev)
writel(0, &adap_ewrap->EWCTL);
#endif
+#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
+ defined(CONFIG_MACH_DAVINCI_DA850_EVM)
+ adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0;
+ adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0;
+ adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0;
+#endif
debug_emac("- emac_close\n");
}
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index cf1da6b..fef57b4 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -36,6 +36,54 @@ static inline int twl6030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
return i2c_read(chip_no, reg, 1, val, 1);
}
+static int twl6030_gpadc_read_channel(u8 channel_no)
+{
+ u8 lsb = 0;
+ u8 msb = 0;
+ int ret = 0;
+
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &lsb,
+ GPCH0_LSB + channel_no * 2);
+ if (ret)
+ return ret;
+
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &msb,
+ GPCH0_MSB + channel_no * 2);
+ if (ret)
+ return ret;
+
+ return (msb << 8) | lsb;
+}
+
+static int twl6030_gpadc_sw2_trigger(void)
+{
+ u8 val;
+ int ret = 0;
+
+ ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2_SP2, CTRL_P2);
+ if (ret)
+ return ret;
+
+ /* Waiting until the SW1 conversion ends*/
+ val = CTRL_P2_BUSY;
+
+ while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &val, CTRL_P2);
+ if (ret)
+ return ret;
+ udelay(1000);
+ }
+
+ return 0;
+}
+
+void twl6030_stop_usb_charging(void)
+{
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, 0, CONTROLLER_CTRL1);
+
+ return;
+}
+
void twl6030_start_usb_charging(void)
{
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VICHRG_1500,
@@ -48,17 +96,89 @@ void twl6030_start_usb_charging(void)
CHARGERUSB_INT_MASK);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VOREG_4P0,
CHARGERUSB_VOREG);
- twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_100,
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_400,
CHARGERUSB_CTRL2);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TERM, CHARGERUSB_CTRL1);
/* Enable USB charging */
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1_EN_CHARGER,
CONTROLLER_CTRL1);
return;
}
+int twl6030_get_battery_current(void)
+{
+ int battery_current = 0;
+ u8 msb = 0;
+ u8 lsb = 0;
+
+ twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &msb, FG_REG_11);
+ twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &lsb, FG_REG_10);
+ battery_current = ((msb << 8) | lsb);
+
+ /* convert 10 bit signed number to 16 bit signed number */
+ if (battery_current >= 0x2000)
+ battery_current = (battery_current - 0x4000);
+
+ battery_current = battery_current * 3000 / 4096;
+ printf("Battery Current: %d mA\n", battery_current);
+
+ return battery_current;
+}
+
+int twl6030_get_battery_voltage(void)
+{
+ int battery_volt = 0;
+ int ret = 0;
+
+ /* Start GPADC SW conversion */
+ ret = twl6030_gpadc_sw2_trigger();
+ if (ret) {
+ printf("Failed to convert battery voltage\n");
+ return ret;
+ }
+
+ /* measure Vbat voltage */
+ battery_volt = twl6030_gpadc_read_channel(7);
+ if (battery_volt < 0) {
+ printf("Failed to read battery voltage\n");
+ return ret;
+ }
+ battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
+ printf("Battery Voltage: %d mV\n", battery_volt);
+
+ return battery_volt;
+}
+
void twl6030_init_battery_charging(void)
{
- twl6030_start_usb_charging();
+ u8 stat1 = 0;
+ int battery_volt = 0;
+ int ret = 0;
+
+ /* Enable VBAT measurement */
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, VBAT_MEAS, MISC1);
+
+ /* Enable GPADC module */
+ ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, FGS | GPADCS, TOGGLE1);
+ if (ret) {
+ printf("Failed to enable GPADC\n");
+ return;
+ }
+
+ battery_volt = twl6030_get_battery_voltage();
+ if (battery_volt < 0)
+ return;
+
+ if (battery_volt < 3000)
+ printf("Main battery voltage too low!\n");
+
+ /* Check for the presence of USB charger */
+ twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &stat1, CONTROLLER_STAT1);
+
+ /* check for battery presence indirectly via Fuel gauge */
+ if ((stat1 & VBUS_DET) && (battery_volt < 3300))
+ twl6030_start_usb_charging();
+
return;
}
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index f810fca..916d73f 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -57,6 +57,7 @@ COBJS-$(CONFIG_RTC_MPC5200) += mpc5xxx.o
COBJS-$(CONFIG_RTC_MPC8xx) += mpc8xx.o
COBJS-$(CONFIG_RTC_PCF8563) += pcf8563.o
COBJS-$(CONFIG_RTC_PL031) += pl031.o
+COBJS-$(CONFIG_RTC_PT7C4338) += pt7c4338.o
COBJS-$(CONFIG_RTC_RS5C372A) += rs5c372.o
COBJS-$(CONFIG_RTC_RTC4543) += rtc4543.o
COBJS-$(CONFIG_RTC_RX8025) += rx8025.o
diff --git a/drivers/rtc/pt7c4338.c b/drivers/rtc/pt7c4338.c
new file mode 100644
index 0000000..26e2c1e
--- /dev/null
+++ b/drivers/rtc/pt7c4338.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * Author: Priyanka Jain <Priyanka.Jain@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file provides Date & Time support (no alarms) for PT7C4338 chip.
+ *
+ * This file is based on drivers/rtc/ds1337.c
+ *
+ * PT7C4338 chip is manufactured by Pericom Technology Inc.
+ * It is a serial real-time clock which provides
+ * 1)Low-power clock/calendar.
+ * 2)Programmable square-wave output.
+ * It has 56 bytes of nonvolatile RAM.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <i2c.h>
+
+/* RTC register addresses */
+#define RTC_SEC_REG_ADDR 0x0
+#define RTC_MIN_REG_ADDR 0x1
+#define RTC_HR_REG_ADDR 0x2
+#define RTC_DAY_REG_ADDR 0x3
+#define RTC_DATE_REG_ADDR 0x4
+#define RTC_MON_REG_ADDR 0x5
+#define RTC_YR_REG_ADDR 0x6
+#define RTC_CTL_STAT_REG_ADDR 0x7
+
+/* RTC second register address bit */
+#define RTC_SEC_BIT_CH 0x80 /* Clock Halt (in Register 0) */
+
+/* RTC control and status register bits */
+#define RTC_CTL_STAT_BIT_RS0 0x1 /* Rate select 0 */
+#define RTC_CTL_STAT_BIT_RS1 0x2 /* Rate select 1 */
+#define RTC_CTL_STAT_BIT_SQWE 0x10 /* Square Wave Enable */
+#define RTC_CTL_STAT_BIT_OSF 0x20 /* Oscillator Stop Flag */
+#define RTC_CTL_STAT_BIT_OUT 0x80 /* Output Level Control */
+
+/* RTC reset value */
+#define RTC_PT7C4338_RESET_VAL \
+ (RTC_CTL_STAT_BIT_RS0 | RTC_CTL_STAT_BIT_RS1 | RTC_CTL_STAT_BIT_OUT)
+
+/****** Helper functions ****************************************/
+static u8 rtc_read(u8 reg)
+{
+ return i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, reg);
+}
+
+static void rtc_write(u8 reg, u8 val)
+{
+ i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, reg, val);
+}
+/****************************************************************/
+
+/* Get the current time from the RTC */
+int rtc_get(struct rtc_time *tmp)
+{
+ int ret = 0;
+ u8 sec, min, hour, mday, wday, mon, year, ctl_stat;
+
+ ctl_stat = rtc_read(RTC_CTL_STAT_REG_ADDR);
+ sec = rtc_read(RTC_SEC_REG_ADDR);
+ min = rtc_read(RTC_MIN_REG_ADDR);
+ hour = rtc_read(RTC_HR_REG_ADDR);
+ wday = rtc_read(RTC_DAY_REG_ADDR);
+ mday = rtc_read(RTC_DATE_REG_ADDR);
+ mon = rtc_read(RTC_MON_REG_ADDR);
+ year = rtc_read(RTC_YR_REG_ADDR);
+ debug("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
+ "hr: %02x min: %02x sec: %02x control_status: %02x\n",
+ year, mon, mday, wday, hour, min, sec, ctl_stat);
+
+ if (ctl_stat & RTC_CTL_STAT_BIT_OSF) {
+ printf("### Warning: RTC oscillator has stopped\n");
+ /* clear the OSF flag */
+ rtc_write(RTC_CTL_STAT_REG_ADDR,
+ rtc_read(RTC_CTL_STAT_REG_ADDR)\
+ & ~RTC_CTL_STAT_BIT_OSF);
+ ret = -1;
+ }
+
+ tmp->tm_sec = bcd2bin(sec & 0x7F);
+ tmp->tm_min = bcd2bin(min & 0x7F);
+ tmp->tm_hour = bcd2bin(hour & 0x3F);
+ tmp->tm_mday = bcd2bin(mday & 0x3F);
+ tmp->tm_mon = bcd2bin(mon & 0x1F);
+ tmp->tm_year = bcd2bin(year) + 2000;
+ tmp->tm_wday = bcd2bin((wday - 1) & 0x07);
+ tmp->tm_yday = 0;
+ tmp->tm_isdst = 0;
+ debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return ret;
+}
+
+/* Set the RTC */
+int rtc_set(struct rtc_time *tmp)
+{
+ debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ rtc_write(RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100));
+ rtc_write(RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon));
+ rtc_write(RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1));
+ rtc_write(RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday));
+ rtc_write(RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour));
+ rtc_write(RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min));
+ rtc_write(RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec));
+
+ return 0;
+}
+
+/* Reset the RTC */
+void rtc_reset(void)
+{
+ rtc_write(RTC_SEC_REG_ADDR, 0x00); /* clearing Clock Halt */
+ rtc_write(RTC_CTL_STAT_REG_ADDR, RTC_PT7C4338_RESET_VAL);
+}
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 32f24de..8eeb48f 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -24,9 +24,13 @@
#define serial_in(y) readb(y)
#endif
+#ifndef CONFIG_SYS_NS16550_IER
+#define CONFIG_SYS_NS16550_IER 0x00
+#endif /* CONFIG_SYS_NS16550_IER */
+
void NS16550_init (NS16550_t com_port, int baud_divisor)
{
- serial_out(0x00, &com_port->ier);
+ serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
@@ -52,7 +56,7 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
void NS16550_reinit (NS16550_t com_port, int baud_divisor)
{
- serial_out(0x00, &com_port->ier);
+ serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
serial_out(0, &com_port->dll);
serial_out(0, &com_port->dlm);
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 1073ac0..cd3439e 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -29,9 +29,10 @@
#endif
#ifdef CONFIG_KIRKWOOD
#include <asm/arch/kirkwood.h>
-#endif
-#ifdef CONFIG_ORION5X
+#elif defined(CONFIG_ORION5X)
#include <asm/arch/orion5x.h>
+#elif defined(CONFIG_ARMADA100)
+#include <asm/arch/armada100.h>
#endif
#if defined (CONFIG_SERIAL_MULTI)
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index c0ae947..5dfcde8 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -47,14 +47,20 @@ static int pl01x_tstc (int portnum);
unsigned int baudrate = CONFIG_BAUDRATE;
DECLARE_GLOBAL_DATA_PTR;
+static struct pl01x_regs *pl01x_get_regs(int portnum)
+{
+ return (struct pl01x_regs *) port[portnum];
+}
+
#ifdef CONFIG_PL010_SERIAL
int serial_init (void)
{
+ struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
unsigned int divisor;
/* First, disable everything */
- writel(0x0, port[CONSOLE_PORT] + UART_PL010_CR);
+ writel(0, &regs->pl010_cr);
/* Set baud rate */
switch (baudrate) {
@@ -82,15 +88,14 @@ int serial_init (void)
divisor = UART_PL010_BAUD_38400;
}
- writel(((divisor & 0xf00) >> 8), port[CONSOLE_PORT] + UART_PL010_LCRM);
- writel((divisor & 0xff), port[CONSOLE_PORT] + UART_PL010_LCRL);
+ writel((divisor & 0xf00) >> 8, &regs->pl010_lcrm);
+ writel(divisor & 0xff, &regs->pl010_lcrl);
/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
- writel((UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN),
- port[CONSOLE_PORT] + UART_PL010_LCRH);
+ writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, &regs->pl010_lcrh);
/* Finally, enable the UART */
- writel((UART_PL010_CR_UARTEN), port[CONSOLE_PORT] + UART_PL010_CR);
+ writel(UART_PL010_CR_UARTEN, &regs->pl010_cr);
return 0;
}
@@ -101,13 +106,14 @@ int serial_init (void)
int serial_init (void)
{
+ struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
unsigned int temp;
unsigned int divider;
unsigned int remainder;
unsigned int fraction;
/* First, disable everything */
- writel(0x0, port[CONSOLE_PORT] + UART_PL011_CR);
+ writel(0, &regs->pl011_cr);
/*
* Set baud rate
@@ -121,16 +127,16 @@ int serial_init (void)
temp = (8 * remainder) / baudrate;
fraction = (temp >> 1) + (temp & 1);
- writel(divider, port[CONSOLE_PORT] + UART_PL011_IBRD);
- writel(fraction, port[CONSOLE_PORT] + UART_PL011_FBRD);
+ writel(divider, &regs->pl011_ibrd);
+ writel(fraction, &regs->pl011_fbrd);
/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
- writel((UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN),
- port[CONSOLE_PORT] + UART_PL011_LCRH);
+ writel(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN,
+ &regs->pl011_lcrh);
/* Finally, enable the UART */
- writel((UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE),
- port[CONSOLE_PORT] + UART_PL011_CR);
+ writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE,
+ &regs->pl011_cr);
return 0;
}
@@ -170,28 +176,31 @@ void serial_setbrg (void)
static void pl01x_putc (int portnum, char c)
{
+ struct pl01x_regs *regs = pl01x_get_regs(portnum);
+
/* Wait until there is space in the FIFO */
- while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF)
+ while (readl(&regs->fr) & UART_PL01x_FR_TXFF)
WATCHDOG_RESET();
/* Send the character */
- writel(c, port[portnum] + UART_PL01x_DR);
+ writel(c, &regs->dr);
}
static int pl01x_getc (int portnum)
{
+ struct pl01x_regs *regs = pl01x_get_regs(portnum);
unsigned int data;
/* Wait until there is data in the FIFO */
- while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE)
+ while (readl(&regs->fr) & UART_PL01x_FR_RXFE)
WATCHDOG_RESET();
- data = readl(port[portnum] + UART_PL01x_DR);
+ data = readl(&regs->dr);
/* Check for an error flag */
if (data & 0xFFFFFF00) {
/* Clear the error */
- writel(0xFFFFFFFF, port[portnum] + UART_PL01x_ECR);
+ writel(0xFFFFFFFF, &regs->ecr);
return -1;
}
@@ -200,7 +209,8 @@ static int pl01x_getc (int portnum)
static int pl01x_tstc (int portnum)
{
+ struct pl01x_regs *regs = pl01x_get_regs(portnum);
+
WATCHDOG_RESET();
- return !(readl(port[portnum] + UART_PL01x_FR) &
- UART_PL01x_FR_RXFE);
+ return !(readl(&regs->fr) & UART_PL01x_FR_RXFE);
}
diff --git a/drivers/serial/serial_pl01x.h b/drivers/serial/serial_pl01x.h
index 5f20fdd..b670c24 100644
--- a/drivers/serial/serial_pl01x.h
+++ b/drivers/serial/serial_pl01x.h
@@ -29,10 +29,28 @@
* Definitions common to both PL010 & PL011
*
*/
-#define UART_PL01x_DR 0x00 /* Data read or written from the interface. */
-#define UART_PL01x_RSR 0x04 /* Receive status register (Read). */
-#define UART_PL01x_ECR 0x04 /* Error clear register (Write). */
-#define UART_PL01x_FR 0x18 /* Flag register (Read only). */
+
+#ifndef __ASSEMBLY__
+/*
+ * We can use a combined structure for PL010 and PL011, because they overlap
+ * only in common registers.
+ */
+struct pl01x_regs {
+ u32 dr; /* 0x00 Data register */
+ u32 ecr; /* 0x04 Error clear register (Write) */
+ u32 pl010_lcrh; /* 0x08 Line control register, high byte */
+ u32 pl010_lcrm; /* 0x0C Line control register, middle byte */
+ u32 pl010_lcrl; /* 0x10 Line control register, low byte */
+ u32 pl010_cr; /* 0x14 Control register */
+ u32 fr; /* 0x18 Flag register (Read only) */
+ u32 reserved;
+ u32 ilpr; /* 0x20 IrDA low-power counter register */
+ u32 pl011_ibrd; /* 0x24 Integer baud rate register */
+ u32 pl011_fbrd; /* 0x28 Fractional baud rate register */
+ u32 pl011_lcrh; /* 0x2C Line control register */
+ u32 pl011_cr; /* 0x30 Control register */
+};
+#endif
#define UART_PL01x_RSR_OE 0x08
#define UART_PL01x_RSR_BE 0x04
@@ -50,14 +68,6 @@
* PL010 definitions
*
*/
-#define UART_PL010_LCRH 0x08 /* Line control register, high byte. */
-#define UART_PL010_LCRM 0x0C /* Line control register, middle byte. */
-#define UART_PL010_LCRL 0x10 /* Line control register, low byte. */
-#define UART_PL010_CR 0x14 /* Control register. */
-#define UART_PL010_IIR 0x1C /* Interrupt indentification register (Read). */
-#define UART_PL010_ICR 0x1C /* Interrupt clear register (Write). */
-#define UART_PL010_ILPR 0x20 /* IrDA low power counter register. */
-
#define UART_PL010_CR_LPE (1 << 7)
#define UART_PL010_CR_RTIE (1 << 6)
#define UART_PL010_CR_TIE (1 << 5)
@@ -93,13 +103,6 @@
* PL011 definitions
*
*/
-#define UART_PL011_IBRD 0x24
-#define UART_PL011_FBRD 0x28
-#define UART_PL011_LCRH 0x2C
-#define UART_PL011_CR 0x30
-#define UART_PL011_IMSC 0x38
-#define UART_PL011_PERIPH_ID0 0xFE0
-
#define UART_PL011_LCRH_SPS (1 << 7)
#define UART_PL011_LCRH_WLEN_8 (3 << 5)
#define UART_PL011_LCRH_WLEN_7 (2 << 5)
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 117ab19..e34a124 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -35,6 +35,7 @@ COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
+COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
COBJS := $(COBJS-y)
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
new file mode 100644
index 0000000..af12c0e
--- /dev/null
+++ b/drivers/spi/omap3_spi.c
@@ -0,0 +1,352 @@
+/*
+ * Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
+ *
+ * Driver for McSPI controller on OMAP3. Based on davinci_spi.c
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Parts taken from linux/drivers/spi/omap2_mcspi.c
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ *
+ * Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include "omap3_spi.h"
+
+#define WORD_LEN 8
+#define SPI_WAIT_TIMEOUT 3000000;
+
+static void spi_reset(struct omap3_spi_slave *ds)
+{
+ unsigned int tmp;
+
+ writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, &ds->regs->sysconfig);
+ do {
+ tmp = readl(&ds->regs->sysstatus);
+ } while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
+
+ writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
+ OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
+ OMAP3_MCSPI_SYSCONFIG_SMARTIDLE,
+ &ds->regs->sysconfig);
+
+ writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &ds->regs->wakeupenable);
+}
+
+void spi_init()
+{
+ /* do nothing */
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct omap3_spi_slave *ds;
+
+ ds = malloc(sizeof(struct omap3_spi_slave));
+ if (!ds) {
+ printf("SPI error: malloc of SPI structure failed\n");
+ return NULL;
+ }
+
+ /*
+ * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
+ * with different number of chip selects (CS, channels):
+ * McSPI1 has 4 CS (bus 0, cs 0 - 3)
+ * McSPI2 has 2 CS (bus 1, cs 0 - 1)
+ * McSPI3 has 2 CS (bus 2, cs 0 - 1)
+ * McSPI4 has 1 CS (bus 3, cs 0)
+ */
+
+ switch (bus) {
+ case 0:
+ ds->regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
+ break;
+ case 1:
+ ds->regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
+ break;
+ case 2:
+ ds->regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
+ break;
+ case 3:
+ ds->regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
+ break;
+ default:
+ printf("SPI error: unsupported bus %i. \
+ Supported busses 0 - 3\n", bus);
+ return NULL;
+ }
+ ds->slave.bus = bus;
+
+ if (((bus == 0) && (cs > 3)) ||
+ ((bus == 1) && (cs > 1)) ||
+ ((bus == 2) && (cs > 1)) ||
+ ((bus == 3) && (cs > 0))) {
+ printf("SPI error: unsupported chip select %i \
+ on bus %i\n", cs, bus);
+ return NULL;
+ }
+ ds->slave.cs = cs;
+
+ if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
+ printf("SPI error: unsupported frequency %i Hz. \
+ Max frequency is 48 Mhz\n", max_hz);
+ return NULL;
+ }
+ ds->freq = max_hz;
+
+ if (mode > SPI_MODE_3) {
+ printf("SPI error: unsupported SPI mode %i\n", mode);
+ return NULL;
+ }
+ ds->mode = mode;
+
+ return &ds->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+
+ free(ds);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+ unsigned int conf, div = 0;
+
+ /* McSPI global module configuration */
+
+ /*
+ * setup when switching from (reset default) slave mode
+ * to single-channel master mode
+ */
+ spi_reset(ds);
+ conf = readl(&ds->regs->modulctrl);
+ conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
+ conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
+ writel(conf, &ds->regs->modulctrl);
+
+ /* McSPI individual channel configuration */
+
+ /* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
+ if (ds->freq) {
+ while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
+ > ds->freq)
+ div++;
+ } else
+ div = 0xC;
+
+ conf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+ /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
+ * REVISIT: this controller could support SPI_3WIRE mode.
+ */
+ conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
+ conf |= OMAP3_MCSPI_CHCONF_DPE0;
+
+ /* wordlength */
+ conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
+ conf |= (WORD_LEN - 1) << 7;
+
+ /* set chipselect polarity; manage with FORCE */
+ if (!(ds->mode & SPI_CS_HIGH))
+ conf |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
+ else
+ conf &= ~OMAP3_MCSPI_CHCONF_EPOL;
+
+ /* set clock divisor */
+ conf &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
+ conf |= div << 2;
+
+ /* set SPI mode 0..3 */
+ if (ds->mode & SPI_CPOL)
+ conf |= OMAP3_MCSPI_CHCONF_POL;
+ else
+ conf &= ~OMAP3_MCSPI_CHCONF_POL;
+ if (ds->mode & SPI_CPHA)
+ conf |= OMAP3_MCSPI_CHCONF_PHA;
+ else
+ conf &= ~OMAP3_MCSPI_CHCONF_PHA;
+
+ /* Transmit & receive mode */
+ conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+
+ writel(conf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+
+ /* Reset the SPI hardware */
+ spi_reset(ds);
+}
+
+int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
+ unsigned long flags)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+ int i;
+ int timeout = SPI_WAIT_TIMEOUT;
+ int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+ if (flags & SPI_XFER_BEGIN)
+ writel(OMAP3_MCSPI_CHCTRL_EN,
+ &ds->regs->channel[ds->slave.cs].chctrl);
+
+ chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+ chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
+ chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ for (i = 0; i < len; i++) {
+ /* wait till TX register is empty (TXS == 1) */
+ while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ OMAP3_MCSPI_CHSTAT_TXS)) {
+ if (--timeout <= 0) {
+ printf("SPI TXS timed out, status=0x%08x\n",
+ readl(&ds->regs->channel[ds->slave.cs].chstat));
+ return -1;
+ }
+ }
+ /* Write the data */
+ writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
+ }
+
+ if (flags & SPI_XFER_END) {
+ /* wait to finish of transfer */
+ while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ OMAP3_MCSPI_CHSTAT_EOT));
+
+ chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+ }
+ return 0;
+}
+
+int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
+ unsigned long flags)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+ int i;
+ int timeout = SPI_WAIT_TIMEOUT;
+ int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+ if (flags & SPI_XFER_BEGIN)
+ writel(OMAP3_MCSPI_CHCTRL_EN,
+ &ds->regs->channel[ds->slave.cs].chctrl);
+
+ chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
+ chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
+ chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ writel(0, &ds->regs->channel[ds->slave.cs].tx);
+
+ for (i = 0; i < len; i++) {
+ /* Wait till RX register contains data (RXS == 1) */
+ while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+ OMAP3_MCSPI_CHSTAT_RXS)) {
+ if (--timeout <= 0) {
+ printf("SPI RXS timed out, status=0x%08x\n",
+ readl(&ds->regs->channel[ds->slave.cs].chstat));
+ return -1;
+ }
+ }
+ /* Read the data */
+ rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
+ }
+
+ if (flags & SPI_XFER_END) {
+ chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf, &ds->regs->channel[ds->slave.cs].chconf);
+
+ writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+ }
+
+ return 0;
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct omap3_spi_slave *ds = to_omap3_spi(slave);
+ unsigned int len;
+ const u8 *txp = dout;
+ u8 *rxp = din;
+ int ret = -1;
+
+ if (bitlen % 8)
+ return -1;
+
+ len = bitlen / 8;
+
+ if (bitlen == 0) { /* only change CS */
+ int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
+
+ if (flags & SPI_XFER_BEGIN) {
+ writel(OMAP3_MCSPI_CHCTRL_EN,
+ &ds->regs->channel[ds->slave.cs].chctrl);
+ chconf |= OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf,
+ &ds->regs->channel[ds->slave.cs].chconf);
+ }
+ if (flags & SPI_XFER_END) {
+ chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
+ writel(chconf,
+ &ds->regs->channel[ds->slave.cs].chconf);
+ writel(0, &ds->regs->channel[ds->slave.cs].chctrl);
+ }
+ ret = 0;
+ } else {
+ if (dout != NULL)
+ ret = omap3_spi_write(slave, len, txp, flags);
+
+ if (din != NULL)
+ ret = omap3_spi_read(slave, len, rxp, flags);
+ }
+ return ret;
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return 1;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+}
diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h
new file mode 100644
index 0000000..b8e3a4c
--- /dev/null
+++ b/drivers/spi/omap3_spi.h
@@ -0,0 +1,117 @@
+/*
+ * Register definitions for the OMAP3 McSPI Controller
+ *
+ * Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
+ *
+ * Parts taken from linux/drivers/spi/omap2_mcspi.c
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ *
+ * Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAP3_SPI_H_
+#define _OMAP3_SPI_H_
+
+#define OMAP3_MCSPI1_BASE 0x48098000
+#define OMAP3_MCSPI2_BASE 0x4809A000
+#define OMAP3_MCSPI3_BASE 0x480B8000
+#define OMAP3_MCSPI4_BASE 0x480BA000
+
+#define OMAP3_MCSPI_MAX_FREQ 48000000
+
+/* OMAP3 McSPI registers */
+struct mcspi_channel {
+ unsigned int chconf; /* 0x2C, 0x40, 0x54, 0x68 */
+ unsigned int chstat; /* 0x30, 0x44, 0x58, 0x6C */
+ unsigned int chctrl; /* 0x34, 0x48, 0x5C, 0x70 */
+ unsigned int tx; /* 0x38, 0x4C, 0x60, 0x74 */
+ unsigned int rx; /* 0x3C, 0x50, 0x64, 0x78 */
+};
+
+struct mcspi {
+ unsigned char res1[0x10];
+ unsigned int sysconfig; /* 0x10 */
+ unsigned int sysstatus; /* 0x14 */
+ unsigned int irqstatus; /* 0x18 */
+ unsigned int irqenable; /* 0x1C */
+ unsigned int wakeupenable; /* 0x20 */
+ unsigned int syst; /* 0x24 */
+ unsigned int modulctrl; /* 0x28 */
+ struct mcspi_channel channel[4]; /* channel0: 0x2C - 0x3C, bus 0 & 1 & 2 & 3 */
+ /* channel1: 0x40 - 0x50, bus 0 & 1 */
+ /* channel2: 0x54 - 0x64, bus 0 & 1 */
+ /* channel3: 0x68 - 0x78, bus 0 */
+};
+
+/* per-register bitmasks */
+#define OMAP3_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
+#define OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2)
+#define OMAP3_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0)
+#define OMAP3_MCSPI_SYSCONFIG_SOFTRESET (1 << 1)
+
+#define OMAP3_MCSPI_SYSSTATUS_RESETDONE (1 << 0)
+
+#define OMAP3_MCSPI_MODULCTRL_SINGLE (1 << 0)
+#define OMAP3_MCSPI_MODULCTRL_MS (1 << 2)
+#define OMAP3_MCSPI_MODULCTRL_STEST (1 << 3)
+
+#define OMAP3_MCSPI_CHCONF_PHA (1 << 0)
+#define OMAP3_MCSPI_CHCONF_POL (1 << 1)
+#define OMAP3_MCSPI_CHCONF_CLKD_MASK (0x0f << 2)
+#define OMAP3_MCSPI_CHCONF_EPOL (1 << 6)
+#define OMAP3_MCSPI_CHCONF_WL_MASK (0x1f << 7)
+#define OMAP3_MCSPI_CHCONF_TRM_RX_ONLY (0x01 << 12)
+#define OMAP3_MCSPI_CHCONF_TRM_TX_ONLY (0x02 << 12)
+#define OMAP3_MCSPI_CHCONF_TRM_MASK (0x03 << 12)
+#define OMAP3_MCSPI_CHCONF_DMAW (1 << 14)
+#define OMAP3_MCSPI_CHCONF_DMAR (1 << 15)
+#define OMAP3_MCSPI_CHCONF_DPE0 (1 << 16)
+#define OMAP3_MCSPI_CHCONF_DPE1 (1 << 17)
+#define OMAP3_MCSPI_CHCONF_IS (1 << 18)
+#define OMAP3_MCSPI_CHCONF_TURBO (1 << 19)
+#define OMAP3_MCSPI_CHCONF_FORCE (1 << 20)
+
+#define OMAP3_MCSPI_CHSTAT_RXS (1 << 0)
+#define OMAP3_MCSPI_CHSTAT_TXS (1 << 1)
+#define OMAP3_MCSPI_CHSTAT_EOT (1 << 2)
+
+#define OMAP3_MCSPI_CHCTRL_EN (1 << 0)
+
+#define OMAP3_MCSPI_WAKEUPENABLE_WKEN (1 << 0)
+
+struct omap3_spi_slave {
+ struct spi_slave slave;
+ struct mcspi *regs;
+ unsigned int freq;
+ unsigned int mode;
+};
+
+static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct omap3_spi_slave, slave);
+}
+
+int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
+ unsigned long flags);
+int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
+ unsigned long flags);
+
+#endif /* _OMAP3_SPI_H_ */