summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-07-01 16:30:44 +0000
committerwdenk <wdenk>2004-07-01 16:30:44 +0000
commit39539887ea7dc298c98ac1fddd38551dfa335120 (patch)
tree31e3bc0bd93cead0c977b8fd26ede7d06f70e0a1 /drivers
parente94d2cd9d1dc0f58b18e7c31fc9345129b1a44fb (diff)
downloadu-boot-imx-39539887ea7dc298c98ac1fddd38551dfa335120.zip
u-boot-imx-39539887ea7dc298c98ac1fddd38551dfa335120.tar.gz
u-boot-imx-39539887ea7dc298c98ac1fddd38551dfa335120.tar.bz2
* Code cleanup (ARM mostly)
* Patch by Curt Brune, 17 May 2004: - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC) - Add support for ESPD-Inc. EVB4510 Board
Diffstat (limited to 'drivers')
-rw-r--r--drivers/Makefile7
-rw-r--r--drivers/lan91c96.c4
-rw-r--r--drivers/pcnet.c38
-rw-r--r--drivers/s3c4510b_eth.c246
-rw-r--r--drivers/s3c4510b_eth.h302
-rw-r--r--drivers/s3c4510b_uart.c216
-rw-r--r--drivers/s3c4510b_uart.h109
-rw-r--r--drivers/smc91111.c6
8 files changed, 903 insertions, 25 deletions
diff --git a/drivers/Makefile b/drivers/Makefile
index 0d1860e..11738b9 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -31,14 +31,15 @@ OBJS = 3c589.o 5701rls.o ali512x.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o \
e1000.o eepro100.o \
- i8042.o i82365.o inca-ip_sw.o \
+ i8042.o i82365.o inca-ip_sw.o keyboard.o \
lan91c96.o natsemi.o netarm_eth.o \
ns16550.o ns8382x.o ns87308.o \
pci.o pci_auto.o pci_indirect.o \
pcnet.o plb2800_eth.o \
- ps2ser.o ps2mult.o pc_keyb.o keyboard.o \
+ ps2ser.o ps2mult.o pc_keyb.o \
rtl8019.o rtl8139.o rtl8169.o \
- s3c24x0_i2c.o sed13806.o sed156x.o \
+ s3c24x0_i2c.o s3c4510b_eth.o s3c4510b_uart.o \
+ sed13806.o sed156x.o \
serial.o serial_max3100.o serial_pl010.o serial_pl011.o \
serial_xuartlite.o sl811_usb.o \
smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
diff --git a/drivers/lan91c96.c b/drivers/lan91c96.c
index c3b715c..bb03dae 100644
--- a/drivers/lan91c96.c
+++ b/drivers/lan91c96.c
@@ -139,7 +139,9 @@ extern int eth_init (bd_t * bd);
extern void eth_halt (void);
extern int eth_rx (void);
extern int eth_send (volatile void *packet, int length);
+#if 0
static int smc_hw_init (void);
+#endif
/*
* This is called by register_netdev(). It is responsible for
@@ -817,6 +819,7 @@ int eth_send (volatile void *packet, int length)
}
+#if 0
/*-------------------------------------------------------------------------
* smc_hw_init()
*
@@ -860,6 +863,7 @@ static int smc_hw_init ()
}
return 0;
}
+#endif /* 0 */
#endif /* COMMANDS & CFG_NET */
diff --git a/drivers/pcnet.c b/drivers/pcnet.c
index 1ba7d81..17e8044 100644
--- a/drivers/pcnet.c
+++ b/drivers/pcnet.c
@@ -34,15 +34,15 @@
#endif
#if PCNET_DEBUG_LEVEL > 0
-#define DEBUG1(fmt,args...) printf (fmt ,##args)
+#define PCNET_DEBUG1(fmt,args...) printf (fmt ,##args)
#if PCNET_DEBUG_LEVEL > 1
-#define DEBUG2(fmt,args...) printf (fmt ,##args)
+#define PCNET_DEBUG2(fmt,args...) printf (fmt ,##args)
#else
-#define DEBUG2(fmt,args...)
+#define PCNET_DEBUG2(fmt,args...)
#endif
#else
-#define DEBUG1(fmt,args...)
-#define DEBUG2(fmt,args...)
+#define PCNET_DEBUG1(fmt,args...)
+#define PCNET_DEBUG2(fmt,args...)
#endif
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
@@ -174,7 +174,7 @@ int pcnet_initialize(bd_t *bis)
u16 command, status;
int dev_nr = 0;
- DEBUG1("\npcnet_initialize...\n");
+ PCNET_DEBUG1("\npcnet_initialize...\n");
for (dev_nr = 0; ; dev_nr++) {
@@ -198,7 +198,7 @@ int pcnet_initialize(bd_t *bis)
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &dev->iobase);
dev->iobase &= ~0xf;
- DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ",
+ PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ",
dev->name, devbusfn, dev->iobase);
command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
@@ -276,7 +276,7 @@ static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_nr)
return -1;
}
- DEBUG1("AMD %s\n", chipname);
+ PCNET_DEBUG1("AMD %s\n", chipname);
#ifdef PCNET_HAS_PROM
/*
@@ -301,7 +301,7 @@ static int pcnet_init(struct eth_device* dev, bd_t *bis)
int i, val;
u32 addr;
- DEBUG1("%s: pcnet_init...\n", dev->name);
+ PCNET_DEBUG1("%s: pcnet_init...\n", dev->name);
/* Switch pcnet to 32bit mode */
pcnet_write_bcr (dev, 20, 2);
@@ -349,7 +349,7 @@ static int pcnet_init(struct eth_device* dev, bd_t *bis)
lp->rx_ring[i].base = PCI_TO_MEM_LE(dev, lp->rx_buf[i]);
lp->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ);
lp->rx_ring[i].status = cpu_to_le16(0x8000);
- DEBUG1("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n",
+ PCNET_DEBUG1("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n",
i, lp->rx_ring[i].base, lp->rx_ring[i].buf_length,
lp->rx_ring[i].status);
}
@@ -367,11 +367,11 @@ static int pcnet_init(struct eth_device* dev, bd_t *bis)
/*
* Setup Init Block.
*/
- DEBUG1("Init block at 0x%p: MAC", &lp->init_block);
+ PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->init_block);
for (i = 0; i < 6; i++) {
lp->init_block.phys_addr[i] = dev->enetaddr[i];
- DEBUG1(" %02x", lp->init_block.phys_addr[i]);
+ PCNET_DEBUG1(" %02x", lp->init_block.phys_addr[i]);
}
lp->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS |
@@ -379,7 +379,7 @@ static int pcnet_init(struct eth_device* dev, bd_t *bis)
lp->init_block.rx_ring = PCI_TO_MEM_LE(dev, lp->rx_ring);
lp->init_block.tx_ring = PCI_TO_MEM_LE(dev, lp->tx_ring);
- DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
+ PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
lp->init_block.tlen_rlen,
lp->init_block.rx_ring, lp->init_block.tx_ring);
@@ -418,7 +418,7 @@ static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len
int i, status;
struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx];
- DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, packet);
+ PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, packet);
/* Wait for completion by testing the OWN bit */
for (i = 1000; i > 0; i--) {
@@ -426,7 +426,7 @@ static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len
if ((status & 0x8000) == 0)
break;
udelay(100);
- DEBUG2(".");
+ PCNET_DEBUG2(".");
}
if (i <= 0) {
printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
@@ -452,7 +452,7 @@ static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len
if (++lp->cur_tx >= TX_RING_SIZE)
lp->cur_tx = 0;
- DEBUG2("done\n");
+ PCNET_DEBUG2("done\n");
return pkt_len;
}
@@ -475,7 +475,7 @@ static int pcnet_recv(struct eth_device* dev)
if (status != 0x03) { /* There was an error. */
printf("%s: Rx%d", dev->name, lp->cur_rx);
- DEBUG1(" (status=0x%x)", status);
+ PCNET_DEBUG1(" (status=0x%x)", status);
if (status & 0x20) printf(" Frame");
if (status & 0x10) printf(" Overflow");
if (status & 0x08) printf(" CRC");
@@ -491,7 +491,7 @@ static int pcnet_recv(struct eth_device* dev)
dev->name, lp->cur_rx, pkt_len);
} else {
NetReceive(lp->rx_buf[lp->cur_rx], pkt_len);
- DEBUG2("Rx%d: %d bytes from 0x%p\n",
+ PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n",
lp->cur_rx, pkt_len, lp->rx_buf[lp->cur_rx]);
}
}
@@ -507,7 +507,7 @@ static void pcnet_halt(struct eth_device* dev)
{
int i;
- DEBUG1("%s: pcnet_halt...\n", dev->name);
+ PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name);
/* Reset the PCnet controller */
pcnet_reset (dev);
diff --git a/drivers/s3c4510b_eth.c b/drivers/s3c4510b_eth.c
new file mode 100644
index 0000000..694703c
--- /dev/null
+++ b/drivers/s3c4510b_eth.c
@@ -0,0 +1,246 @@
+/***********************************************************************
+ *
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description: Ethernet interface for Samsung S3C4510B SoC
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_S3C4510_ETH
+
+#include <command.h>
+#include <net.h>
+#include <asm/hardware.h>
+#include "s3c4510b_eth.h"
+
+static TX_FrameDescriptor txFDbase[ETH_MaxTxFrames];
+static MACFrame txFrameBase[ETH_MaxTxFrames];
+static RX_FrameDescriptor rxFDbase[PKTBUFSRX];
+static ETH m_eth;
+
+static s32 TxFDinit( ETH *eth) {
+
+ s32 i;
+ MACFrame *txFrmBase;
+
+ /* disable cache for access to the TX buffers */
+ txFrmBase = (MACFrame *)( (u32)txFrameBase | CACHE_DISABLE_MASK);
+
+ /* store start of Tx descriptors and set current */
+ eth->m_curTX_FD = (TX_FrameDescriptor *) ((u32)txFDbase | CACHE_DISABLE_MASK);
+ eth->m_baseTX_FD = eth->m_curTX_FD;
+
+ for ( i = 0; i < ETH_MaxTxFrames; i++) {
+ eth->m_baseTX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)&txFrmBase[i];
+ eth->m_baseTX_FD[i].m_frameDataPtr.bf.owner = 0x0; /* CPU owner */
+ eth->m_baseTX_FD[i].m_opt.ui = 0x0;
+ eth->m_baseTX_FD[i].m_status.ui = 0x0;
+ eth->m_baseTX_FD[i].m_nextFD = &eth->m_baseTX_FD[i+1];
+ }
+
+ /* make the list circular */
+ eth->m_baseTX_FD[i-1].m_nextFD = &eth->m_baseTX_FD[0];
+
+ PUT_REG( REG_BDMATXPTR, (u32)eth->m_curTX_FD);
+
+ return 0;
+}
+
+static s32 RxFDinit( ETH *eth) {
+
+ s32 i;
+ /* MACFrame *rxFrmBase; */
+
+ /* disable cache for access to the RX buffers */
+ /* rxFrmBase = (MACFrame *)( (u32)rxFrameBase | CACHE_DISABLE_MASK); */
+
+ /* store start of Rx descriptors and set current */
+ eth->m_curRX_FD = (RX_FrameDescriptor *)((u32)rxFDbase | CACHE_DISABLE_MASK);
+ eth->m_baseRX_FD = eth->m_curRX_FD;
+ for ( i = 0; i < PKTBUFSRX; i++) {
+ eth->m_baseRX_FD[i].m_frameDataPtr.bf.dataPtr = (u32)NetRxPackets[i] | CACHE_DISABLE_MASK;
+ eth->m_baseRX_FD[i].m_frameDataPtr.bf.owner = 0x1; /* BDMA owner */
+ eth->m_baseRX_FD[i].m_reserved = 0x0;
+ eth->m_baseRX_FD[i].m_status.ui = 0x0;
+ eth->m_baseRX_FD[i].m_nextFD = &eth->m_baseRX_FD[i+1];
+ }
+
+ /* make the list circular */
+ eth->m_baseRX_FD[i-1].m_nextFD = &eth->m_baseRX_FD[0];
+
+ PUT_REG( REG_BDMARXPTR, (u32)eth->m_curRX_FD);
+
+ return 0;
+}
+
+/*
+ * Public u-boot interface functions below
+ */
+
+int eth_init(bd_t *bis)
+{
+
+ ETH *eth = &m_eth;
+
+ /* store our MAC address */
+ eth->m_mac = bis->bi_enetaddr;
+
+ /* setup DBMA and MAC */
+ PUT_REG( REG_BDMARXCON, ETH_BRxRS); /* reset BDMA RX machine */
+ PUT_REG( REG_BDMATXCON, ETH_BTxRS); /* reset BDMA TX machine */
+ PUT_REG( REG_MACCON , ETH_SwReset); /* reset MAC machine */
+ PUT_REG( REG_BDMARXLSZ, sizeof(MACFrame));
+ PUT_REG( REG_MACCON , 0); /* reset MAC machine */
+
+ /* init frame descriptors */
+ TxFDinit( eth);
+ RxFDinit( eth);
+
+ /* init the CAM with our MAC address */
+ PUT_REG( REG_CAM_BASE, (eth->m_mac[0] << 24) |
+ (eth->m_mac[1] << 16) |
+ (eth->m_mac[2] << 8) |
+ (eth->m_mac[3]));
+ PUT_REG( REG_CAM_BASE + 0x4, (eth->m_mac[4] << 24) |
+ (eth->m_mac[5] << 16));
+
+ /* enable CAM address 1 -- the MAC we just loaded */
+ PUT_REG( REG_CAMEN, 0x1);
+
+ PUT_REG( REG_CAMCON,
+ ETH_BroadAcc | /* accept broadcast packetes */
+ ETH_CompEn); /* enable compare mode (check against the CAM) */
+
+ /* configure the BDMA Transmitter control */
+ PUT_REG( REG_BDMATXCON,
+ ETH_BTxBRST | /* BDMA Tx burst size 16 words */
+ ETH_BTxMSL110 | /* BDMA Tx wait to fill 6/8 of the BDMA */
+ ETH_BTxSTSKO | /* BDMA Tx interrupt(Stop) on non-owner TX FD */
+ ETH_BTxEn); /* BDMA Tx Enable */
+
+ /* configure the MAC Transmitter control */
+ PUT_REG( REG_MACTXCON,
+ ETH_EnComp | /* interrupt when the MAC transmits or discards packet */
+ ETH_TxEn); /* MAC transmit enable */
+
+ /* configure the BDMA Receiver control */
+ PUT_REG( REG_BDMARXCON,
+ ETH_BRxBRST | /* BDMA Rx Burst Size 16 words */
+ ETH_BRxSTSKO | /* BDMA Rx interrupt(Stop) on non-owner RX FD */
+ ETH_BRxMAINC | /* BDMA Rx Memory Address increment */
+ ETH_BRxDIE | /* BDMA Rx Every Received Frame Interrupt Enable */
+ ETH_BRxNLIE | /* BDMA Rx NULL List Interrupt Enable */
+ ETH_BRxNOIE | /* BDMA Rx Not Owner Interrupt Enable */
+ ETH_BRxLittle | /* BDMA Rx Little endian */
+ ETH_BRxEn); /* BDMA Rx Enable */
+
+ /* configure the MAC Receiver control */
+ PUT_REG( REG_MACRXCON,
+ ETH_RxEn); /* MAC ETH_RxEn */
+
+ return 0;
+
+}
+
+/* Send a packet */
+s32 eth_send(volatile void *packet, s32 length)
+{
+
+ u32 i;
+ ETH *eth = &m_eth;
+
+ if ( eth->m_curTX_FD->m_frameDataPtr.bf.owner) {
+ printf(__FUNCTION__"(): TX Frame. CPU not owner.\n");
+ return -1;
+ }
+
+ /* copy user data into frame data pointer */
+ memcpy((void *)eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr,
+ (void *)packet,
+ length);
+
+ /* Set TX Frame flags */
+ eth->m_curTX_FD->m_opt.bf.widgetAlign = 0;
+ eth->m_curTX_FD->m_opt.bf.frameDataDir = 1;
+ eth->m_curTX_FD->m_opt.bf.littleEndian = 1;
+ eth->m_curTX_FD->m_opt.bf.macTxIrqEnbl = 1;
+ eth->m_curTX_FD->m_opt.bf.no_crc = 0;
+ eth->m_curTX_FD->m_opt.bf.no_padding = 0;
+
+ /* Set TX Frame length */
+ eth->m_curTX_FD->m_status.bf.len = length;
+
+ /* Change ownership to BDMA */
+ eth->m_curTX_FD->m_frameDataPtr.bf.owner = 1;
+
+ /* Enable MAC and BDMA Tx control register */
+ SET_REG( REG_BDMATXCON, ETH_BTxEn);
+ SET_REG( REG_MACTXCON, ETH_TxEn);
+
+ /* poll on TX completion status */
+ while ( !eth->m_curTX_FD->m_status.bf.complete) {
+ /* sleep */
+ for ( i = 0; i < 0x10000; i ++);
+ }
+
+ /* Change the Tx frame descriptor for next use */
+ eth->m_curTX_FD = eth->m_curTX_FD->m_nextFD;
+
+ return 0;
+}
+
+/* Check for received packets */
+s32 eth_rx (void)
+{
+ s32 nLen = 0;
+ ETH *eth = &m_eth;
+
+ /* check if packet ready */
+ if ( (GET_REG( REG_BDMASTAT)) & ETH_S_BRxRDF) {
+ /* process all waiting packets */
+ while ( !eth->m_curRX_FD->m_frameDataPtr.bf.owner) {
+ nLen = eth->m_curRX_FD->m_status.bf.len;
+ /* call back u-boot -- may call eth_send() */
+ NetReceive ((u8 *)eth->m_curRX_FD->m_frameDataPtr.ui, nLen);
+ /* set owner back to CPU */
+ eth->m_curRX_FD->m_frameDataPtr.bf.owner = 1;
+ /* clear status */
+ eth->m_curRX_FD->m_status.ui = 0x0;
+ /* advance to next descriptor */
+ eth->m_curRX_FD = eth->m_curRX_FD->m_nextFD;
+ /* clear received frame bit */
+ PUT_REG( REG_BDMASTAT, ETH_S_BRxRDF);
+ }
+ }
+
+ return nLen;
+}
+
+/* Halt ethernet engine */
+void eth_halt(void)
+{
+ /* disable MAC */
+ PUT_REG( REG_MACCON, ETH_HaltReg);
+}
+
+#endif
diff --git a/drivers/s3c4510b_eth.h b/drivers/s3c4510b_eth.h
new file mode 100644
index 0000000..cbddba7
--- /dev/null
+++ b/drivers/s3c4510b_eth.h
@@ -0,0 +1,302 @@
+#ifndef __S3C4510B_ETH_H
+#define __S3C4510B_ETH_H
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * MODULE: $Id:$
+ * Description: Ethernet interface
+ * Runtime Env: ARM7TDMI
+ * Change History:
+ * 03-02-04 Create (Curt Brune) curt@cucy.com
+ *
+ */
+
+#define __packed __attribute__ ((packed))
+
+#define ETH_MAC_ADDR_SIZE (6) /* dst,src addr is 6bytes each */
+#define ETH_MaxTxFrames (16) /* Max number of Tx Frames */
+
+/* Buffered DMA Receiver Control Register */
+#define ETH_BRxBRST 0x0000F /* BDMA Rx Burst Size * BRxBRST */
+ /* = Burst Data Size 16 */
+#define ETH_BRxSTSKO 0x00020 /* BDMA Rx Stop/Skip Frame or Interrupt(=1) */
+ /* case of not OWNER the current Frame */
+#define ETH_BRxMAINC 0x00040 /* BDMA Rx Memory Address Inc/Dec */
+#define ETH_BRxDIE 0x00080 /* BDMA Rx Every Received Frame Interrupt Enable */
+#define ETH_BRxNLIE 0x00100 /* BDMA Rx NULL List Interrupt Enable */
+#define ETH_BRxNOIE 0x00200 /* BDMA Rx Not Owner Interrupt Enable */
+#define ETH_BRxMSOIE 0x00400 /* BDMA Rx Maximum Size over Interrupr Enable */
+#define ETH_BRxLittle 0x00800 /* BDMA Rx Big/Little Endian */
+#define ETH_BRxBig 0x00000 /* BDMA Rx Big/Little Endian */
+#define ETH_BRxWA01 0x01000 /* BDMA Rx Word Alignment- one invalid byte */
+#define ETH_BRxWA10 0x02000 /* BDMA Rx Word Alignment- two invalid byte */
+#define ETH_BRxWA11 0x03000 /* BDMA Rx Word Alignment- three invalid byte */
+#define ETH_BRxEn 0x04000 /* BDMA Rx Enable */
+#define ETH_BRxRS 0x08000 /* BDMA Rx Reset */
+#define ETH_RxEmpty 0x10000 /* BDMA Rx Buffer empty interrupt */
+#define ETH_BRxEarly 0x20000 /* BDMA Rx Early notify Interrupt */
+
+/* Buffered DMA Trasmit Control Register(BDMATXCON) */
+#define ETH_BTxBRST 0x0000F /* BDMA Tx Burst Size = 16 */
+#define ETH_BTxSTSKO 0x00020 /* BDMA Tx Stop/Skip Frame or Interrupt in case */
+ /* of not Owner the current frame */
+#define ETH_BTxCPIE 0x00080 /* BDMA Tx Complete to send control */
+ /* packet Enable */
+#define ETH_BTxNOIE 0x00200 /* BDMA Tx Buffer Not Owner */
+#define ETH_BTxEmpty 0x00400 /* BDMA Tx Buffer Empty Interrupt */
+
+/* BDMA Tx buffer can be moved to the MAC Tx IO when the new frame comes in. */
+#define ETH_BTxMSL000 0x00000 /* No wait to fill the BDMA */
+#define ETH_BTxMSL001 0x00800 /* wait to fill 1/8 of the BDMA */
+#define ETH_BTxMSL010 0x01000 /* wait to fill 2/8 of the BDMA */
+#define ETH_BTxMSL011 0x01800 /* wait to fill 3/8 of the BDMA */
+#define ETH_BTxMSL100 0x02000 /* wait to fill 4/8 of the BDMA */
+#define ETH_BTxMSL101 0x02800 /* wait to fill 5/8 of the BDMA */
+#define ETH_BTxMSL110 0x03000 /* wait to fill 6/8 of the BDMA */
+#define ETH_BTxMSL111 0x03800 /* wait to fill 7/8 of the BDMA */
+#define ETH_BTxEn 0x04000 /* BDMA Tx Enable */
+#define ETH_BTxRS 0x08000 /* BDMA Tx Reset */
+
+/* BDMA Status Register */
+#define ETH_S_BRxRDF 0x00001 /* BDMA Rx Done Every Received Frame */
+#define ETH_S_BRxNL 0x00002 /* BDMA Rx NULL List */
+#define ETH_S_BRxNO 0x00004 /* BDMA Rx Not Owner */
+#define ETH_S_BRxMSO 0x00008 /* BDMA Rx Maximum Size Over */
+#define ETH_S_BRxEmpty 0x00010 /* BDMA Rx Buffer Empty */
+#define ETH_S_BRxSEarly 0x00020 /* Early Notify */
+#define ETH_S_BRxFRF 0x00080 /* One more frame data in BDMA receive buffer */
+#define ETH_S_BTxCCP 0x10000 /* BDMA Tx Complete to send Control Packet */
+#define ETH_S_BTxNL 0x20000 /* BDMA Tx Null List */
+#define ETH_S_BTxNO 0x40000 /* BDMA Tx Not Owner */
+#define ETH_S_BTxEmpty 0x100000 /* BDMA Tx Buffer Empty */
+
+/* MAC Control Register */
+#define ETH_HaltReg 0x0001 /* stop transmission and reception */
+ /* after completion of any current packets */
+#define ETH_HaltImm 0x0002 /* Stop transmission and reception immediately */
+#define ETH_SwReset 0x0004 /* reset all Ethernet controller state machines */
+ /* and FIFOs */
+#define ETH_FullDup 0x0008 /* allow transmission to begin while reception */
+ /* is occurring */
+#define ETH_MACLoop 0x0010 /* MAC loopback */
+#define ETH_ConnM00 0x0000 /* Automatic-default */
+#define ETH_ConnM01 0x0020 /* Force 10Mbits endec */
+#define ETH_ConnM10 0x0040 /* Force MII (rate determined by MII clock */
+#define ETH_MIIOFF 0x0040 /* Force MII (rate determined by MII clock */
+#define ETH_Loop10 0x0080 /* Loop 10Mbps */
+#define ETH_MissRoll 0x0400 /* Missed error counter rolled over */
+#define ETH_MDCOFF 0x1000 /* MII Station Management Clock Off */
+#define ETH_EnMissRoll 0x2000 /* Interrupt when missed error counter rolls */
+ /* over */
+#define ETH_Link10 0x8000 /* Link status 10Mbps */
+
+/* CAM control register(CAMCON) */
+#define ETH_StationAcc 0x0001 /* Accept any packet with a unicast station */
+ /* address */
+#define ETH_GroupAcc 0x0002 /* Accept any packet with multicast-group */
+ /* station address */
+#define ETH_BroadAcc 0x0004 /* Accept any packet with a broadcast station */
+ /* address */
+#define ETH_NegCAM 0x0008 /* 0: Accept packets CAM recognizes, */
+ /* reject others */
+ /* 1: reject packets CAM recognizes, */
+ /* accept others */
+#define ETH_CompEn 0x0010 /* Compare Enable mode */
+
+/* Transmit Control Register(MACTXCON) */
+#define ETH_TxEn 0x0001 /* transmit Enable */
+#define ETH_TxHalt 0x0002 /* Transmit Halt Request */
+#define ETH_NoPad 0x0004 /* suppress Padding */
+#define ETH_NoCRC 0x0008 /* Suppress CRC */
+#define ETH_FBack 0x0010 /* Fast Back-off */
+#define ETH_NoDef 0x0020 /* Disable the defer counter */
+#define ETH_SdPause 0x0040 /* Send Pause */
+#define ETH_MII10En 0x0080 /* MII 10Mbps mode enable */
+#define ETH_EnUnder 0x0100 /* Enable Underrun */
+#define ETH_EnDefer 0x0200 /* Enable Deferral */
+#define ETH_EnNCarr 0x0400 /* Enable No Carrier */
+#define ETH_EnExColl 0x0800 /* interrupt if 16 collision occur */
+ /* in the same packet */
+#define ETH_EnLateColl 0x1000 /* interrupt if collision occurs after */
+ /* 512 bit times(64 bytes times) */
+#define ETH_EnTxPar 0x2000 /* interrupt if the MAC transmit FIFO */
+ /* has a parity error */
+#define ETH_EnComp 0x4000 /* interrupt when the MAC transmits or */
+ /* discards one packet */
+
+/* Transmit Status Register(MACTXSTAT) */
+#define ETH_ExColl 0x0010 /* Excessive collision */
+#define ETH_TxDeffered 0x0020 /* set if 16 collisions occur for same packet */
+#define ETH_Paused 0x0040 /* packet waited because of pause during */
+ /* transmission */
+#define ETH_IntTx 0x0080 /* set if transmission of packet causes an */
+ /* interrupt condiftion */
+#define ETH_Under 0x0100 /* MAC transmit FIFO becomes empty during */
+ /* transmission */
+#define ETH_Defer 0x0200 /* MAC defers for MAC deferral */
+#define ETH_NCarr 0x0400 /* No carrier sense detected during the */
+ /* transmission of a packet */
+#define ETH_SQE 0x0800 /* Signal Quality Error */
+#define ETH_LateColl 0x1000 /* a collision occures after 512 bit times */
+#define ETH_TxPar 0x2000 /* MAC transmit FIFO has detected a parity error */
+#define ETH_Comp 0x4000 /* MAC transmit or discards one packet */
+#define ETH_TxHalted 0x8000 /* Transmission was halted by clearing */
+ /* TxEn or Halt immedite */
+
+/* Receive Control Register (MACRXCON) */
+#define ETH_RxEn 0x0001
+#define ETH_RxHalt 0x0002
+#define ETH_LongEn 0x0004
+#define ETH_ShortEn 0x0008
+#define ETH_StripCRC 0x0010
+#define ETH_PassCtl 0x0020
+#define ETH_IgnoreCRC 0x0040
+#define ETH_EnAlign 0x0100
+#define ETH_EnCRCErr 0x0200
+#define ETH_EnOver 0x0400
+#define ETH_EnLongErr 0x0800
+#define ETH_EnRxPar 0x2000
+#define ETH_EnGood 0x4000
+
+/* Receive Status Register(MACRXSTAT) */
+#define ETH_MCtlRecd 0x0020
+#define ETH_MIntRx 0x0040
+#define ETH_MRx10Stat 0x0080
+#define ETH_MAllignErr 0x0100
+#define ETH_MCRCErr 0x0200
+#define ETH_MOverflow 0x0400
+#define ETH_MLongErr 0x0800
+#define ETH_MRxPar 0x2000
+#define ETH_MRxGood 0x4000
+#define ETH_MRxHalted 0x8000
+
+/* type of ethernet packets */
+#define ETH_TYPE_ARP (0x0806)
+#define ETH_TYPE_IP (0x0800)
+
+#define ETH_HDR_SIZE (14)
+
+/* bit field for frame data pointer word */
+typedef struct __BF_FrameDataPtr {
+ u32 dataPtr:31;
+ u32 owner: 1;
+} BF_FrameDataPtr;
+
+typedef union _FrameDataPtr {
+ u32 ui;
+ BF_FrameDataPtr bf;
+} FrameDataPtr;
+
+typedef struct __BF_TX_Options {
+ u32 no_padding: 1;
+ u32 no_crc: 1;
+ u32 macTxIrqEnbl: 1;
+ u32 littleEndian: 1;
+ u32 frameDataDir: 1;
+ u32 widgetAlign: 2;
+ u32 reserved:25;
+} BF_TX_Options;
+
+typedef union _TX_Options {
+ u32 ui;
+ BF_TX_Options bf;
+} TX_Options;
+
+typedef struct __BF_RX_Status {
+ u32 len:16; /* frame length */
+ u32 reserved1: 3;
+ u32 overMax: 1;
+ u32 reserved2: 1;
+ u32 ctrlRcv: 1;
+ u32 intRx: 1;
+ u32 rx10stat: 1;
+ u32 alignErr: 1;
+ u32 crcErr: 1;
+ u32 overFlow: 1;
+ u32 longErr: 1;
+ u32 reserved3: 1;
+ u32 parityErr: 1;
+ u32 good: 1;
+ u32 halted: 1;
+} BF_RX_Status;
+
+typedef union _RX_Status {
+ u32 ui;
+ BF_RX_Status bf;
+} RX_Status;
+
+typedef struct __BF_TX_Status {
+ u32 len:16; /* frame length */
+ u32 txCollCnt: 4;
+ u32 exColl: 1;
+ u32 txDefer: 1;
+ u32 paused: 1;
+ u32 intTx: 1;
+ u32 underRun: 1;
+ u32 defer: 1;
+ u32 noCarrier: 1;
+ u32 SQErr: 1;
+ u32 lateColl: 1;
+ u32 parityErr: 1;
+ u32 complete: 1;
+ u32 halted: 1;
+} BF_TX_Status;
+
+typedef union _TX_Status {
+ u32 ui;
+ BF_TX_Status bf;
+} TX_Status;
+
+/* TX descriptor structure */
+typedef struct __TX_FrameDescriptor {
+ volatile FrameDataPtr m_frameDataPtr;
+ TX_Options m_opt;
+ volatile TX_Status m_status;
+ struct __TX_FrameDescriptor *m_nextFD;
+} TX_FrameDescriptor;
+
+/* RX descriptor structure */
+typedef struct __RX_FrameDescriptor {
+ volatile FrameDataPtr m_frameDataPtr;
+ u32 m_reserved;
+ volatile RX_Status m_status;
+ struct __RX_FrameDescriptor *m_nextFD;
+} RX_FrameDescriptor;
+
+/* MAC Frame Structure */
+typedef struct __MACFrame {
+ u8 m_dstAddr[6] __packed;
+ u8 m_srcAddr[6] __packed;
+ u16 m_lengthOrType __packed;
+ u8 m_payload[1506] __packed;
+} MACFrame;
+
+/* Ethernet Control block */
+typedef struct __ETH {
+ TX_FrameDescriptor *m_curTX_FD; /* pointer to current TX frame descriptor */
+ TX_FrameDescriptor *m_baseTX_FD; /* pointer to base TX frame descriptor */
+ RX_FrameDescriptor *m_curRX_FD; /* pointer to current RX frame descriptor */
+ RX_FrameDescriptor *m_baseRX_FD; /* pointer to base RX frame descriptor */
+ u8 *m_mac; /* pointer to our MAC address */
+} ETH;
+
+#endif
diff --git a/drivers/s3c4510b_uart.c b/drivers/s3c4510b_uart.c
new file mode 100644
index 0000000..44b96a9
--- /dev/null
+++ b/drivers/s3c4510b_uart.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * (C) Copyright 2004
+ * DAVE Srl
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * (C) Copyright 2002-2004
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * MODULE: $Id:$
+ * Description: UART/Serial interface for Samsung S3C4510B SoC
+ * Runtime Env: ARM7TDMI
+ * Change History:
+ * 03-02-04 Create (Curt Brune) curt@cucy.com
+ *
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_S3C4510_UART
+
+#include <asm/hardware.h>
+#include "s3c4510b_uart.h"
+
+static UART *uart;
+
+/* flush serial input queue. returns 0 on success or negative error
+ * number otherwise
+ */
+static int serial_flush_input(void)
+{
+ volatile u32 tmp;
+
+ /* keep on reading as long as the receiver is not empty */
+ while( uart->m_stat.bf.rxReady) {
+ tmp = uart->m_rx;
+ }
+
+ return 0;
+}
+
+
+/* flush output queue. returns 0 on success or negative error number
+ * otherwise
+ */
+static int serial_flush_output(void)
+{
+ /* wait until the transmitter is no longer busy */
+ while( !uart->m_stat.bf.txBufEmpty);
+
+ return 0;
+}
+
+
+void serial_setbrg (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ UART_LINE_CTRL ulctrl;
+ UART_CTRL uctrl;
+ UART_BAUD_DIV ubd;
+
+ serial_flush_output();
+ serial_flush_input();
+
+ /* control register */
+ uctrl.ui = 0x0;
+ uctrl.bf.rxMode = 0x1;
+ uctrl.bf.rxIrq = 0x0;
+ uctrl.bf.txMode = 0x1;
+ uctrl.bf.DSR = 0x0;
+ uctrl.bf.sendBreak = 0x0;
+ uctrl.bf.loopBack = 0x0;
+ uart->m_ctrl.ui = uctrl.ui;
+
+ /* line control register */
+ ulctrl.ui = 0x0;
+ ulctrl.bf.wordLen = 0x3; /* 8 bit data */
+ ulctrl.bf.nStop = 0x0; /* 1 stop bit */
+ ulctrl.bf.parity = 0x0; /* no parity */
+ ulctrl.bf.clk = 0x0; /* internal clock */
+ ulctrl.bf.infra_red = 0x0; /* no infra_red */
+ uart->m_lineCtrl.ui = ulctrl.ui;
+
+ ubd.ui = 0x0;
+
+ /* see table on page 10-15 in SAMSUNG S3C4510B manual */
+ /* get correct divisor */
+ switch(gd->baudrate) {
+ case 1200: ubd.bf.cnt0 = 1301; break;
+ case 2400: ubd.bf.cnt0 = 650; break;
+ case 4800: ubd.bf.cnt0 = 324; break;
+ case 9600: ubd.bf.cnt0 = 162; break;
+ case 19200: ubd.bf.cnt0 = 80; break;
+ case 38400: ubd.bf.cnt0 = 40; break;
+ case 57600: ubd.bf.cnt0 = 26; break;
+ case 115200: ubd.bf.cnt0 = 13; break;
+ }
+
+ uart->m_baudDiv.ui = ubd.ui;
+ uart->m_baudCnt = 0x0;
+ uart->m_baudClk = 0x0;
+
+}
+
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+
+#if CONFIG_SERIAL1 == 1
+ uart = (UART *)UART0_BASE;
+#elif CONFIG_SERIAL1 == 2
+ uart = (UART *)UART1_BASE;
+#else
+#error CONFIG_SERIAL1 not equal to 1 or 2
+#endif
+
+ serial_setbrg ();
+
+ return (0);
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+ /* wait for room in the transmit FIFO */
+ while( !uart->m_stat.bf.txBufEmpty);
+
+ uart->m_tx = c;
+
+ /*
+ to be polite with serial console add a line feed
+ to the carriage return character
+ */
+ if (c=='\n')
+ serial_putc('\r');
+}
+
+/*
+ * Test if an input byte is ready from the serial port. Returns non-zero on
+ * success, 0 otherwise.
+ */
+int serial_tstc (void)
+{
+ return uart->m_stat.bf.rxReady;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+ int rv;
+
+ for(;;) {
+ rv = serial_tstc();
+
+ if (rv) {
+ return uart->m_rx & 0xFF;
+ }
+ }
+}
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+
+ /* busy wait for tx complete */
+ while ( !uart->m_stat.bf.txComplete);
+
+ /* clear break */
+ uart->m_ctrl.bf.sendBreak = 0;
+
+}
+
+#endif
diff --git a/drivers/s3c4510b_uart.h b/drivers/s3c4510b_uart.h
new file mode 100644
index 0000000..b06c76d
--- /dev/null
+++ b/drivers/s3c4510b_uart.h
@@ -0,0 +1,109 @@
+#ifndef __UART_H
+#define __UART_H
+
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description: S3C4510B UART register layout
+ */
+
+/* UART LINE CONTROL register */
+typedef struct __BF_UART_LINE_CTRL {
+ u32 wordLen: 2;
+ u32 nStop: 1;
+ u32 parity: 3;
+ u32 clk: 1;
+ u32 infra_red: 1;
+ u32 unused:24;
+} BF_UART_LINE_CTRL;
+
+typedef union _UART_LINE_CTRL {
+ u32 ui;
+ BF_UART_LINE_CTRL bf;
+} UART_LINE_CTRL;
+
+/* UART CONTROL register */
+typedef struct __BF_UART_CTRL {
+ u32 rxMode: 2;
+ u32 rxIrq: 1;
+ u32 txMode: 2;
+ u32 DSR: 1;
+ u32 sendBreak: 1;
+ u32 loopBack: 1;
+ u32 unused:24;
+} BF_UART_CTRL;
+
+typedef union _UART_CTRL {
+ u32 ui;
+ BF_UART_CTRL bf;
+} UART_CTRL;
+
+/* UART STATUS register */
+typedef struct __BF_UART_STAT {
+ u32 overrun: 1;
+ u32 parity: 1;
+ u32 frame: 1;
+ u32 breakIrq: 1;
+ u32 DTR: 1;
+ u32 rxReady: 1;
+ u32 txBufEmpty: 1;
+ u32 txComplete: 1;
+ u32 unused:24;
+} BF_UART_STAT;
+
+typedef union _UART_STAT {
+ u32 ui;
+ BF_UART_STAT bf;
+} UART_STAT;
+
+/* UART BAUD_DIV register */
+typedef struct __BF_UART_BAUD_DIV {
+ u32 cnt1: 4;
+ u32 cnt0:12;
+ u32 unused:16;
+} BF_UART_BAUD_DIV;
+
+typedef union _UART_BAUD_DIV {
+ u32 ui;
+ BF_UART_BAUD_DIV bf;
+} UART_BAUD_DIV;
+
+/* UART register block */
+typedef struct __UART {
+ volatile UART_LINE_CTRL m_lineCtrl;
+ volatile UART_CTRL m_ctrl;
+ volatile UART_STAT m_stat;
+ volatile u32 m_tx;
+ volatile u32 m_rx;
+ volatile UART_BAUD_DIV m_baudDiv;
+ volatile u32 m_baudCnt;
+ volatile u32 m_baudClk;
+} UART;
+
+#define NL 0x0A
+#define CR 0x0D
+#define BSP 0x08
+#define ESC 0x1B
+#define CTRLZ 0x1A
+#define RUBOUT 0x7F
+
+#endif
diff --git a/drivers/smc91111.c b/drivers/smc91111.c
index 2a4f005..6feb1e2 100644
--- a/drivers/smc91111.c
+++ b/drivers/smc91111.c
@@ -795,11 +795,11 @@ static int smc_open (bd_t * bd)
address = smc_mac_addr[i + 1] << 8;
address |= smc_mac_addr[i];
- SMC_outw (address, ADDR0_REG + i);
+ SMC_outw (address, (ADDR0_REG + i));
}
#else
for (i = 0; i < 6; i++)
- SMC_outb (smc_mac_addr[i], ADDR0_REG + i);
+ SMC_outb (smc_mac_addr[i], (ADDR0_REG + i));
#endif
return 0;
@@ -1550,7 +1550,7 @@ int get_rom_mac (char *v_rom_mac)
SMC_SELECT_BANK (1);
for (i=0; i<6; i++)
{
- v_rom_mac[i] = SMC_inb (ADDR0_REG + i);
+ v_rom_mac[i] = SMC_inb ((ADDR0_REG + i));
valid_mac |= v_rom_mac[i];
}