Merge branch 'u-boot/master' into 'u-boot-arm/master'

Conflicts:
	common/cmd_fpga.c
	drivers/usb/host/ohci-at91.c

34 files changed, 1976 insertions, 1030 deletions

diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9df1e26..f77c1ec 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -47,6 +47,8 @@ COBJS-$(CONFIG_OMAP_GPIO)	+= omap_gpio.o
 COBJS-$(CONFIG_DB8500_GPIO)	+= db8500_gpio.o
 COBJS-$(CONFIG_BCM2835_GPIO)	+= bcm2835_gpio.o
 COBJS-$(CONFIG_S3C2440_GPIO)	+= s3c2440_gpio.o
+COBJS-$(CONFIG_XILINX_GPIO)	+= xilinx_gpio.o
+COBJS-$(CONFIG_ADI_GPIO2)	+= adi_gpio2.o
 
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
diff --git a/drivers/gpio/adi_gpio2.c b/drivers/gpio/adi_gpio2.c
new file mode 100644
index 0000000..7a034eb
--- /dev/null
+++ b/drivers/gpio/adi_gpio2.c
@@ -0,0 +1,440 @@
+/*
+ * ADI GPIO2 Abstraction Layer
+ * Support BF54x, BF60x and future processors.
+ *
+ * Copyright 2008-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
+
+static struct gpio_port_t * const gpio_array[] = {
+	(struct gpio_port_t *)PORTA_FER,
+	(struct gpio_port_t *)PORTB_FER,
+	(struct gpio_port_t *)PORTC_FER,
+	(struct gpio_port_t *)PORTD_FER,
+	(struct gpio_port_t *)PORTE_FER,
+	(struct gpio_port_t *)PORTF_FER,
+	(struct gpio_port_t *)PORTG_FER,
+#if defined(CONFIG_BF54x)
+	(struct gpio_port_t *)PORTH_FER,
+	(struct gpio_port_t *)PORTI_FER,
+	(struct gpio_port_t *)PORTJ_FER,
+#endif
+};
+
+#define RESOURCE_LABEL_SIZE	16
+
+static struct str_ident {
+	char name[RESOURCE_LABEL_SIZE];
+} str_ident[MAX_RESOURCES];
+
+static void gpio_error(unsigned gpio)
+{
+	printf("adi_gpio2: GPIO %d wasn't requested!\n", gpio);
+}
+
+static void set_label(unsigned short ident, const char *label)
+{
+	if (label) {
+		strncpy(str_ident[ident].name, label,
+			RESOURCE_LABEL_SIZE);
+		str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
+	}
+}
+
+static char *get_label(unsigned short ident)
+{
+	return *str_ident[ident].name ? str_ident[ident].name : "UNKNOWN";
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+	if (label == NULL)
+		printf("adi_gpio2: please provide none-null label\n");
+
+	if (label)
+		return strcmp(str_ident[ident].name, label);
+	else
+		return -EINVAL;
+}
+
+#define map_entry(m, i)      reserved_##m##_map[gpio_bank(i)]
+#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
+#define reserve(m, i)        (map_entry(m, i) |= gpio_bit(i))
+#define unreserve(m, i)      (map_entry(m, i) &= ~gpio_bit(i))
+#define DECLARE_RESERVED_MAP(m, c) unsigned short reserved_##m##_map[c]
+
+static DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
+static DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES));
+
+inline int check_gpio(unsigned gpio)
+{
+#if defined(CONFIG_BF54x)
+	if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 ||
+		gpio == GPIO_PH14 || gpio == GPIO_PH15 ||
+		gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
+		return -EINVAL;
+#endif
+	if (gpio >= MAX_GPIOS)
+		return -EINVAL;
+	return 0;
+}
+
+static void port_setup(unsigned gpio, unsigned short usage)
+{
+#if defined(CONFIG_BF54x)
+	if (usage == GPIO_USAGE)
+		gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
+	else
+		gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
+#else
+	if (usage == GPIO_USAGE)
+		gpio_array[gpio_bank(gpio)]->port_fer_clear = gpio_bit(gpio);
+	else
+		gpio_array[gpio_bank(gpio)]->port_fer_set = gpio_bit(gpio);
+#endif
+	SSYNC();
+}
+
+inline void portmux_setup(unsigned short per)
+{
+	u32 pmux;
+	u16 ident = P_IDENT(per);
+	u16 function = P_FUNCT2MUX(per);
+
+	pmux = gpio_array[gpio_bank(ident)]->port_mux;
+
+	pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
+	pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
+
+	gpio_array[gpio_bank(ident)]->port_mux = pmux;
+}
+
+inline u16 get_portmux(unsigned short per)
+{
+	u32 pmux;
+	u16 ident = P_IDENT(per);
+
+	pmux = gpio_array[gpio_bank(ident)]->port_mux;
+
+	return pmux >> (2 * gpio_sub_n(ident)) & 0x3;
+}
+
+unsigned short get_gpio_dir(unsigned gpio)
+{
+	return 0x01 &
+		(gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio));
+}
+
+/***********************************************************
+*
+* FUNCTIONS:	Peripheral Resource Allocation
+*		and PortMux Setup
+*
+* INPUTS/OUTPUTS:
+* per	Peripheral Identifier
+* label	String
+*
+* DESCRIPTION: Peripheral Resource Allocation and Setup API
+**************************************************************/
+
+int peripheral_request(unsigned short per, const char *label)
+{
+	unsigned short ident = P_IDENT(per);
+
+	/*
+	 * Don't cares are pins with only one dedicated function
+	 */
+
+	if (per & P_DONTCARE)
+		return 0;
+
+	if (!(per & P_DEFINED))
+		return -ENODEV;
+
+	BUG_ON(ident >= MAX_RESOURCES);
+
+	/* If a pin can be muxed as either GPIO or peripheral, make
+	 * sure it is not already a GPIO pin when we request it.
+	 */
+	if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
+		printf("%s: Peripheral %d is already reserved as GPIO by %s!\n",
+		       __func__, ident, get_label(ident));
+		return -EBUSY;
+	}
+
+	if (unlikely(is_reserved(peri, ident, 1))) {
+		/*
+		 * Pin functions like AMC address strobes my
+		 * be requested and used by several drivers
+		 */
+
+		if (!((per & P_MAYSHARE) &&
+			get_portmux(per) == P_FUNCT2MUX(per))) {
+			/*
+			 * Allow that the identical pin function can
+			 * be requested from the same driver twice
+			 */
+
+			if (cmp_label(ident, label) == 0)
+				goto anyway;
+
+			printf("%s: Peripheral %d function %d is already "
+				"reserved by %s!\n", __func__, ident,
+				P_FUNCT2MUX(per), get_label(ident));
+			return -EBUSY;
+		}
+	}
+
+ anyway:
+	reserve(peri, ident);
+
+	portmux_setup(per);
+	port_setup(ident, PERIPHERAL_USAGE);
+
+	set_label(ident, label);
+
+	return 0;
+}
+
+int peripheral_request_list(const unsigned short per[], const char *label)
+{
+	u16 cnt;
+	int ret;
+
+	for (cnt = 0; per[cnt] != 0; cnt++) {
+		ret = peripheral_request(per[cnt], label);
+
+		if (ret < 0) {
+			for (; cnt > 0; cnt--)
+				peripheral_free(per[cnt - 1]);
+
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+void peripheral_free(unsigned short per)
+{
+	unsigned short ident = P_IDENT(per);
+
+	if (per & P_DONTCARE)
+		return;
+
+	if (!(per & P_DEFINED))
+		return;
+
+	if (unlikely(!is_reserved(peri, ident, 0)))
+		return;
+
+	if (!(per & P_MAYSHARE))
+		port_setup(ident, GPIO_USAGE);
+
+	unreserve(peri, ident);
+
+	set_label(ident, "free");
+}
+
+void peripheral_free_list(const unsigned short per[])
+{
+	u16 cnt;
+	for (cnt = 0; per[cnt] != 0; cnt++)
+		peripheral_free(per[cnt]);
+}
+
+/***********************************************************
+*
+* FUNCTIONS: GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio	PIO Number between 0 and MAX_GPIOS
+* label	String
+*
+* DESCRIPTION: GPIO Driver API
+**************************************************************/
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+
+	/*
+	 * Allow that the identical GPIO can
+	 * be requested from the same driver twice
+	 * Do nothing and return -
+	 */
+
+	if (cmp_label(gpio, label) == 0)
+		return 0;
+
+	if (unlikely(is_reserved(gpio, gpio, 1))) {
+		printf("adi_gpio2: GPIO %d is already reserved by %s!\n",
+			gpio, get_label(gpio));
+		return -EBUSY;
+	}
+	if (unlikely(is_reserved(peri, gpio, 1))) {
+		printf("adi_gpio2: GPIO %d is already reserved as Peripheral "
+			"by %s!\n", gpio, get_label(gpio));
+		return -EBUSY;
+	}
+
+	reserve(gpio, gpio);
+	set_label(gpio, label);
+
+	port_setup(gpio, GPIO_USAGE);
+
+	return 0;
+}
+
+int gpio_free(unsigned gpio)
+{
+	if (check_gpio(gpio) < 0)
+		return -1;
+
+	if (unlikely(!is_reserved(gpio, gpio, 0))) {
+		gpio_error(gpio);
+		return -1;
+	}
+
+	unreserve(gpio, gpio);
+
+	set_label(gpio, "free");
+
+	return 0;
+}
+
+#ifdef ADI_SPECIAL_GPIO_BANKS
+static DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
+
+int special_gpio_request(unsigned gpio, const char *label)
+{
+	/*
+	 * Allow that the identical GPIO can
+	 * be requested from the same driver twice
+	 * Do nothing and return -
+	 */
+
+	if (cmp_label(gpio, label) == 0)
+		return 0;
+
+	if (unlikely(is_reserved(special_gpio, gpio, 1))) {
+		printf("adi_gpio2: GPIO %d is already reserved by %s!\n",
+			gpio, get_label(gpio));
+		return -EBUSY;
+	}
+	if (unlikely(is_reserved(peri, gpio, 1))) {
+		printf("adi_gpio2: GPIO %d is already reserved as Peripheral "
+			"by %s!\n", gpio, get_label(gpio));
+
+		return -EBUSY;
+	}
+
+	reserve(special_gpio, gpio);
+	reserve(peri, gpio);
+
+	set_label(gpio, label);
+	port_setup(gpio, GPIO_USAGE);
+
+	return 0;
+}
+
+void special_gpio_free(unsigned gpio)
+{
+	if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
+		gpio_error(gpio);
+		return;
+	}
+
+	reserve(special_gpio, gpio);
+	reserve(peri, gpio);
+	set_label(gpio, "free");
+}
+#endif
+
+static inline void __gpio_direction_input(unsigned gpio)
+{
+	gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
+#if defined(CONFIG_BF54x)
+	gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+#else
+	gpio_array[gpio_bank(gpio)]->inen_set = gpio_bit(gpio);
+#endif
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+
+	if (!is_reserved(gpio, gpio, 0)) {
+		gpio_error(gpio);
+		return -EINVAL;
+	}
+
+	local_irq_save(flags);
+	__gpio_direction_input(gpio);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+int gpio_set_value(unsigned gpio, int arg)
+{
+	if (arg)
+		gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+	else
+		gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+
+	return 0;
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+
+	if (!is_reserved(gpio, gpio, 0)) {
+		gpio_error(gpio);
+		return -EINVAL;
+	}
+
+	local_irq_save(flags);
+
+#if defined(CONFIG_BF54x)
+	gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+#else
+	gpio_array[gpio_bank(gpio)]->inen_clear = gpio_bit(gpio);
+#endif
+	gpio_set_value(gpio, value);
+	gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+int gpio_get_value(unsigned gpio)
+{
+	return 1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
+}
+
+void gpio_labels(void)
+{
+	int c, gpio;
+
+	for (c = 0; c < MAX_RESOURCES; c++) {
+		gpio = is_reserved(gpio, c, 1);
+		if (!check_gpio(c) && gpio)
+			printf("GPIO_%d:\t%s\tGPIO %s\n", c, get_label(c),
+				get_gpio_dir(c) ? "OUTPUT" : "INPUT");
+		else if (is_reserved(peri, c, 1))
+			printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c));
+		else
+			continue;
+	}
+}
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c
new file mode 100644
index 0000000..37fb0c5
--- /dev/null
+++ b/drivers/gpio/xilinx_gpio.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright (c) 2013 Xilinx, Michal Simek
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <linux/list.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+static LIST_HEAD(gpio_list);
+
+enum gpio_direction {
+	GPIO_DIRECTION_OUT = 0,
+	GPIO_DIRECTION_IN = 1,
+};
+
+/* Gpio simple map */
+struct gpio_regs {
+	u32 gpiodata;
+	u32 gpiodir;
+};
+
+#define GPIO_NAME_SIZE	10
+
+struct gpio_names {
+	char name[GPIO_NAME_SIZE];
+};
+
+/* Initialized, rxbd_current, rx_first_buf must be 0 after init */
+struct xilinx_gpio_priv {
+	struct gpio_regs *regs;
+	u32 gpio_min;
+	u32 gpio_max;
+	u32 gpiodata_store;
+	char name[GPIO_NAME_SIZE];
+	struct list_head list;
+	struct gpio_names *gpio_name;
+};
+
+/* Store number of allocated gpio pins */
+static u32 xilinx_gpio_max;
+
+/* Get associated gpio controller */
+static struct xilinx_gpio_priv *gpio_get_controller(unsigned gpio)
+{
+	struct list_head *entry;
+	struct xilinx_gpio_priv *priv = NULL;
+
+	list_for_each(entry, &gpio_list) {
+		priv = list_entry(entry, struct xilinx_gpio_priv, list);
+		if (gpio >= priv->gpio_min && gpio <= priv->gpio_max) {
+			debug("%s: reg: %x, min-max: %d-%d\n", __func__,
+			      (u32)priv->regs, priv->gpio_min, priv->gpio_max);
+			return priv;
+		}
+	}
+	puts("!!!Can't get gpio controller!!!\n");
+	return NULL;
+}
+
+/* Get gpio pin name if used/setup */
+static char *get_name(unsigned gpio)
+{
+	u32 gpio_priv;
+	struct xilinx_gpio_priv *priv;
+
+	debug("%s\n", __func__);
+
+	priv = gpio_get_controller(gpio);
+	if (priv) {
+		gpio_priv = gpio - priv->gpio_min;
+
+		return *priv->gpio_name[gpio_priv].name ?
+			priv->gpio_name[gpio_priv].name : "UNKNOWN";
+	}
+	return "UNKNOWN";
+}
+
+/* Get output value */
+static int gpio_get_output_value(unsigned gpio)
+{
+	u32 val, gpio_priv;
+	struct xilinx_gpio_priv *priv = gpio_get_controller(gpio);
+
+	if (priv) {
+		gpio_priv = gpio - priv->gpio_min;
+		val = !!(priv->gpiodata_store & (1 << gpio_priv));
+		debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__,
+		      (u32)priv->regs, gpio_priv, val);
+
+		return val;
+	}
+	return -1;
+}
+
+/* Get input value */
+static int gpio_get_input_value(unsigned gpio)
+{
+	u32 val, gpio_priv;
+	struct gpio_regs *regs;
+	struct xilinx_gpio_priv *priv = gpio_get_controller(gpio);
+
+	if (priv) {
+		regs = priv->regs;
+		gpio_priv = gpio - priv->gpio_min;
+		val = readl(&regs->gpiodata);
+		val = !!(val & (1 << gpio_priv));
+		debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__,
+		      (u32)priv->regs, gpio_priv, val);
+
+		return val;
+	}
+	return -1;
+}
+
+/* Set gpio direction */
+static int gpio_set_direction(unsigned gpio, enum gpio_direction direction)
+{
+	u32 val, gpio_priv;
+	struct gpio_regs *regs;
+	struct xilinx_gpio_priv *priv = gpio_get_controller(gpio);
+
+	if (priv) {
+		regs = priv->regs;
+		val = readl(&regs->gpiodir);
+
+		gpio_priv = gpio - priv->gpio_min;
+		if (direction == GPIO_DIRECTION_OUT)
+			val &= ~(1 << gpio_priv);
+		else
+			val |= 1 << gpio_priv;
+
+		writel(val, &regs->gpiodir);
+		debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__,
+		      (u32)priv->regs, gpio_priv, val);
+
+		return 0;
+	}
+
+	return -1;
+}
+
+/* Get gpio direction */
+static int gpio_get_direction(unsigned gpio)
+{
+	u32 val, gpio_priv;
+	struct gpio_regs *regs;
+	struct xilinx_gpio_priv *priv = gpio_get_controller(gpio);
+
+	if (priv) {
+		regs = priv->regs;
+		gpio_priv = gpio - priv->gpio_min;
+		val = readl(&regs->gpiodir);
+		val = !!(val & (1 << gpio_priv));
+		debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__,
+		      (u32)priv->regs, gpio_priv, val);
+
+		return val;
+	}
+
+	return -1;
+}
+
+/*
+ * Get input value
+ * for example gpio setup to output only can't get input value
+ * which is breaking gpio toggle command
+ */
+int gpio_get_value(unsigned gpio)
+{
+	u32 val;
+
+	if (gpio_get_direction(gpio) == GPIO_DIRECTION_OUT)
+		val = gpio_get_output_value(gpio);
+	else
+		val = gpio_get_input_value(gpio);
+
+	return val;
+}
+
+/* Set output value */
+static int gpio_set_output_value(unsigned gpio, int value)
+{
+	u32 val, gpio_priv;
+	struct gpio_regs *regs;
+	struct xilinx_gpio_priv *priv = gpio_get_controller(gpio);
+
+	if (priv) {
+		regs = priv->regs;
+		gpio_priv = gpio - priv->gpio_min;
+		val = priv->gpiodata_store;
+		if (value)
+			val |= 1 << gpio_priv;
+		else
+			val &= ~(1 << gpio_priv);
+
+		writel(val, &regs->gpiodata);
+		debug("%s: reg: %x, gpio_no: %d, output_val: %d\n", __func__,
+		      (u32)priv->regs, gpio_priv, val);
+		priv->gpiodata_store = val;
+
+		return 0;
+	}
+
+	return -1;
+}
+
+int gpio_set_value(unsigned gpio, int value)
+{
+	if (gpio_get_direction(gpio) == GPIO_DIRECTION_OUT)
+		return gpio_set_output_value(gpio, value);
+
+	return -1;
+}
+
+/* Set GPIO as input */
+int gpio_direction_input(unsigned gpio)
+{
+	debug("%s\n", __func__);
+	return gpio_set_direction(gpio, GPIO_DIRECTION_IN);
+}
+
+/* Setup GPIO as output and set output value */
+int gpio_direction_output(unsigned gpio, int value)
+{
+	int ret = gpio_set_direction(gpio, GPIO_DIRECTION_OUT);
+
+	debug("%s\n", __func__);
+
+	if (ret < 0)
+		return ret;
+
+	return gpio_set_output_value(gpio, value);
+}
+
+/* Show gpio status */
+void gpio_info(void)
+{
+	unsigned gpio;
+
+	struct list_head *entry;
+	struct xilinx_gpio_priv *priv = NULL;
+
+	list_for_each(entry, &gpio_list) {
+		priv = list_entry(entry, struct xilinx_gpio_priv, list);
+		printf("\n%s: %s/%x (%d-%d)\n", __func__, priv->name,
+		       (u32)priv->regs, priv->gpio_min, priv->gpio_max);
+
+		for (gpio = priv->gpio_min; gpio <= priv->gpio_max; gpio++) {
+			printf("GPIO_%d:\t%s is an ", gpio, get_name(gpio));
+			if (gpio_get_direction(gpio) == GPIO_DIRECTION_OUT)
+				printf("OUTPUT value = %d\n",
+				       gpio_get_output_value(gpio));
+			else
+				printf("INPUT value = %d\n",
+				       gpio_get_input_value(gpio));
+		}
+	}
+}
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	u32 gpio_priv;
+	struct xilinx_gpio_priv *priv;
+
+	if (gpio >= xilinx_gpio_max)
+		return -EINVAL;
+
+	priv = gpio_get_controller(gpio);
+	if (priv) {
+		gpio_priv = gpio - priv->gpio_min;
+
+		if (label != NULL) {
+			strncpy(priv->gpio_name[gpio_priv].name, label,
+				GPIO_NAME_SIZE);
+			priv->gpio_name[gpio_priv].name[GPIO_NAME_SIZE - 1] =
+					'\0';
+		}
+		return 0;
+	}
+
+	return -1;
+}
+
+int gpio_free(unsigned gpio)
+{
+	u32 gpio_priv;
+	struct xilinx_gpio_priv *priv;
+
+	if (gpio >= xilinx_gpio_max)
+		return -EINVAL;
+
+	priv = gpio_get_controller(gpio);
+	if (priv) {
+		gpio_priv = gpio - priv->gpio_min;
+		priv->gpio_name[gpio_priv].name[0] = '\0';
+
+		/* Do nothing here */
+		return 0;
+	}
+
+	return -1;
+}
+
+int gpio_alloc(u32 baseaddr, const char *name, u32 gpio_no)
+{
+	struct xilinx_gpio_priv *priv;
+
+	priv = calloc(1, sizeof(struct xilinx_gpio_priv));
+
+	/* Setup gpio name */
+	if (name != NULL) {
+		strncpy(priv->name, name, GPIO_NAME_SIZE);
+		priv->name[GPIO_NAME_SIZE - 1] = '\0';
+	}
+	priv->regs = (struct gpio_regs *)baseaddr;
+
+	priv->gpio_min = xilinx_gpio_max;
+	xilinx_gpio_max = priv->gpio_min + gpio_no;
+	priv->gpio_max = xilinx_gpio_max - 1;
+
+	priv->gpio_name = calloc(gpio_no, sizeof(struct gpio_names));
+
+	INIT_LIST_HEAD(&priv->list);
+	list_add_tail(&priv->list, &gpio_list);
+
+	printf("%s: Add %s (%d-%d)\n", __func__, name,
+	       priv->gpio_min, priv->gpio_max);
+
+	/* Return the first gpio allocated for this device */
+	return priv->gpio_min;
+}
+
+/* Dual channel gpio is one IP with two independent channels */
+int gpio_alloc_dual(u32 baseaddr, const char *name, u32 gpio_no0, u32 gpio_no1)
+{
+	int ret;
+
+	ret = gpio_alloc(baseaddr, name, gpio_no0);
+	gpio_alloc(baseaddr + 8, strcat((char *)name, "_1"), gpio_no1);
+
+	/* Return the first gpio allocated for this device */
+	return ret;
+}
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 7cd4281..24648a2 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -25,14 +25,11 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libmmc.o
 
-ifdef CONFIG_SPL_BUILD
-COBJS-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o
-endif
 
 COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
 COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
 COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
-COBJS-$(CONFIG_FTSDC010) += ftsdc010_esdhc.o
+COBJS-$(CONFIG_FTSDC010) += ftsdc010_mci.o
 COBJS-$(CONFIG_GENERIC_MMC) += mmc.o
 COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
 COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o
@@ -46,6 +43,7 @@ COBJS-$(CONFIG_SDHCI) += sdhci.o
 COBJS-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o
 COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
 COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o
+COBJS-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o
 COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
 COBJS-$(CONFIG_DWMMC) += dw_mmc.o
 COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c
index e2379e3..5aa2184 100644
--- a/drivers/mmc/davinci_mmc.c
+++ b/drivers/mmc/davinci_mmc.c
@@ -285,8 +285,11 @@ dmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 			 */
 			if (bytes_left > fifo_bytes)
 				dmmc_wait_fifo_status(regs, 0x4a);
-			else if (bytes_left == fifo_bytes)
+			else if (bytes_left == fifo_bytes) {
 				dmmc_wait_fifo_status(regs, 0x40);
+				if (cmd->cmdidx == MMC_CMD_SEND_EXT_CSD)
+					udelay(600);
+			}
 
 			for (i = 0; bytes_left && (i < fifo_words); i++) {
 				cmddata = get_val(&regs->mmcdrr);
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index e945c0a..861f4b9 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -178,7 +178,7 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
 	int timeout;
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 	struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
-#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
+#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
 	uint wml_value;
 
 	wml_value = data->blocksize/4;
@@ -601,8 +601,7 @@ int fsl_esdhc_mmc_init(bd_t *bis)
 {
 	struct fsl_esdhc_cfg *cfg;
 
-	cfg = malloc(sizeof(struct fsl_esdhc_cfg));
-	memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
+	cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1);
 	cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
 	cfg->sdhc_clk = gd->arch.sdhc_clk;
 	return fsl_esdhc_initialize(bis, cfg);
diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c
deleted file mode 100644
index 42f0e0c..0000000
--- a/drivers/mmc/ftsdc010_esdhc.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <faraday/ftsdc010.h>
-
-/*
- * supported mmc hosts
- * setting the number CONFIG_FTSDC010_NUMBER in your configuration file.
- */
-static struct mmc ftsdc010_dev[CONFIG_FTSDC010_NUMBER];
-static struct mmc_host ftsdc010_host[CONFIG_FTSDC010_NUMBER];
-
-static struct ftsdc010_mmc *ftsdc010_get_base_mmc(int dev_index)
-{
-	return (struct ftsdc010_mmc *)CONFIG_FTSDC010_BASE + dev_index;
-}
-
-#ifdef DEBUG
-static void ftsdc010_dump_reg(struct mmc_host *host)
-{
-	debug("cmd: %08x\n",		readl(&host->reg->cmd));
-	debug("argu: %08x\n",		readl(&host->reg->argu));
-	debug("rsp0: %08x\n",		readl(&host->reg->rsp0));
-	debug("rsp1: %08x\n",		readl(&host->reg->rsp1));
-	debug("rsp2: %08x\n",		readl(&host->reg->rsp2));
-	debug("rsp3: %08x\n",		readl(&host->reg->rsp3));
-	debug("rsp_cmd: %08x\n",	readl(&host->reg->rsp_cmd));
-	debug("dcr: %08x\n",		readl(&host->reg->dcr));
-	debug("dtr: %08x\n",		readl(&host->reg->dtr));
-	debug("dlr: %08x\n",		readl(&host->reg->dlr));
-	debug("status: %08x\n",		readl(&host->reg->status));
-	debug("clr: %08x\n",		readl(&host->reg->clr));
-	debug("int_mask: %08x\n",	readl(&host->reg->int_mask));
-	debug("pcr: %08x\n",		readl(&host->reg->pcr));
-	debug("ccr: %08x\n",		readl(&host->reg->ccr));
-	debug("bwr: %08x\n",		readl(&host->reg->bwr));
-	debug("dwr: %08x\n",		readl(&host->reg->dwr));
-	debug("feature: %08x\n",	readl(&host->reg->feature));
-	debug("rev: %08x\n",		readl(&host->reg->rev));
-}
-#endif
-
-static unsigned int enable_imask(struct ftsdc010_mmc *reg, unsigned int imask)
-{
-	unsigned int newmask;
-
-	newmask = readl(&reg->int_mask);
-	newmask |= imask;
-
-	writel(newmask, &reg->int_mask);
-
-	return newmask;
-}
-
-static void ftsdc010_pio_read(struct mmc_host *host, char *buf, unsigned int size)
-{
-	unsigned int fifo;
-	unsigned int fifo_words;
-	unsigned int *ptr;
-	unsigned int status;
-	unsigned int retry = 0;
-
-	/* get_data_buffer */
-	ptr = (unsigned int *)buf;
-
-	while (size) {
-		status = readl(&host->reg->status);
-		debug("%s: size: %08x\n", __func__, size);
-
-		if (status & FTSDC010_STATUS_FIFO_ORUN) {
-
-			debug("%s: FIFO OVERRUN: sta: %08x\n",
-					__func__, status);
-
-			fifo = host->fifo_len > size ?
-				size : host->fifo_len;
-
-			size -= fifo;
-
-			fifo_words = fifo >> 2;
-
-			while (fifo_words--)
-				*ptr++ = readl(&host->reg->dwr);
-
-			/*
-			 * for adding some delays for SD card to put
-			 * data into FIFO again
-			 */
-			udelay(4*FTSDC010_DELAY_UNIT);
-
-#ifdef CONFIG_FTSDC010_SDIO
-			/* sdio allow non-power-of-2 blksz */
-			if (fifo & 3) {
-				unsigned int n = fifo & 3;
-				unsigned int data = readl(&host->reg->dwr);
-
-				unsigned char *p = (unsigned char *)ptr;
-
-				while (n--) {
-					*p++ = data;
-					data >>= 8;
-				}
-			}
-#endif
-		} else {
-			udelay(1);
-			if (++retry >= FTSDC010_PIO_RETRY) {
-				debug("%s: PIO_RETRY timeout\n", __func__);
-				return;
-			}
-		}
-	}
-}
-
-static void ftsdc010_pio_write(struct mmc_host *host, const char *buf,
-			unsigned int size)
-{
-	unsigned int fifo;
-	unsigned int *ptr;
-	unsigned int status;
-	unsigned int retry = 0;
-
-	/* get data buffer */
-	ptr = (unsigned int *)buf;
-
-	while (size) {
-		status = readl(&host->reg->status);
-
-		if (status & FTSDC010_STATUS_FIFO_URUN) {
-			fifo = host->fifo_len > size ?
-				size : host->fifo_len;
-
-			size -= fifo;
-
-			fifo = (fifo + 3) >> 2;
-
-			while (fifo--) {
-				writel(*ptr, &host->reg->dwr);
-				ptr++;
-			}
-		} else {
-			udelay(1);
-			if (++retry >= FTSDC010_PIO_RETRY) {
-				debug("%s: PIO_RETRY timeout\n", __func__);
-				return;
-			}
-		}
-	}
-}
-
-static int ftsdc010_check_rsp(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int sta, clear;
-
-	sta = readl(&host->reg->status);
-	debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx);
-
-	/* check RSP TIMEOUT or FAIL */
-	if (sta & FTSDC010_STATUS_RSP_TIMEOUT) {
-		/* RSP TIMEOUT */
-		debug("%s: RSP timeout: sta: %08x\n", __func__, sta);
-
-		clear |= FTSDC010_CLR_RSP_TIMEOUT;
-		writel(clear, &host->reg->clr);
-
-		return TIMEOUT;
-	} else if (sta & FTSDC010_STATUS_RSP_CRC_FAIL) {
-		/* clear response fail bit */
-		debug("%s: RSP CRC FAIL: sta: %08x\n", __func__, sta);
-
-		clear |= FTSDC010_CLR_RSP_CRC_FAIL;
-		writel(clear, &host->reg->clr);
-
-		return COMM_ERR;
-	} else if (sta & FTSDC010_STATUS_RSP_CRC_OK) {
-
-		/* clear response CRC OK bit */
-		clear |= FTSDC010_CLR_RSP_CRC_OK;
-	}
-
-	writel(clear, &host->reg->clr);
-	return 0;
-}
-
-static int ftsdc010_check_data(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int sta, clear;
-
-	sta = readl(&host->reg->status);
-	debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx);
-
-	/* check DATA TIMEOUT or FAIL */
-	if (data) {
-
-		/* Transfer Complete */
-		if (sta & FTSDC010_STATUS_DATA_END)
-			clear |= FTSDC010_STATUS_DATA_END;
-
-		/* Data CRC_OK */
-		if (sta & FTSDC010_STATUS_DATA_CRC_OK)
-			clear |= FTSDC010_STATUS_DATA_CRC_OK;
-
-		/* DATA TIMEOUT or DATA CRC FAIL */
-		if (sta & FTSDC010_STATUS_DATA_TIMEOUT) {
-			/* DATA TIMEOUT */
-			debug("%s: DATA TIMEOUT: sta: %08x\n", __func__, sta);
-
-			clear |= FTSDC010_STATUS_DATA_TIMEOUT;
-			writel(clear, &host->reg->clr);
-
-			return TIMEOUT;
-		} else if (sta & FTSDC010_STATUS_DATA_CRC_FAIL) {
-			/* DATA CRC FAIL */
-			debug("%s: DATA CRC FAIL: sta: %08x\n", __func__, sta);
-
-			clear |= FTSDC010_STATUS_DATA_CRC_FAIL;
-			writel(clear, &host->reg->clr);
-
-			return COMM_ERR;
-		}
-		writel(clear, &host->reg->clr);
-	}
-	return 0;
-}
-
-static int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
-{
-	struct mmc_host *host = mmc->priv;
-
-#ifdef CONFIG_FTSDC010_SDIO
-	unsigned int scon;
-#endif
-	unsigned int ccon;
-	unsigned int mask, tmpmask;
-	unsigned int ret;
-	unsigned int sta, i;
-
-	ret = 0;
-
-	if (data)
-		mask = FTSDC010_INT_MASK_RSP_TIMEOUT;
-	else if (cmd->resp_type & MMC_RSP_PRESENT)
-		mask = FTSDC010_INT_MASK_RSP_TIMEOUT;
-	else
-		mask = FTSDC010_INT_MASK_CMD_SEND;
-
-	/* write argu reg */
-	debug("%s: argu: %08x\n", __func__, host->reg->argu);
-	writel(cmd->cmdarg, &host->reg->argu);
-
-	/* setup commnad */
-	ccon = FTSDC010_CMD_IDX(cmd->cmdidx);
-
-	/* setup command flags */
-	ccon |= FTSDC010_CMD_CMD_EN;
-
-	/*
-	 * This hardware didn't support specific commands for mapping
-	 * MMC_RSP_BUSY and MMC_RSP_OPCODE. Hence we don't deal with it.
-	 */
-	if (cmd->resp_type & MMC_RSP_PRESENT) {
-		ccon |= FTSDC010_CMD_NEED_RSP;
-		mask |= FTSDC010_INT_MASK_RSP_CRC_OK |
-			FTSDC010_INT_MASK_RSP_CRC_FAIL;
-	}
-
-	if (cmd->resp_type & MMC_RSP_136)
-		ccon |= FTSDC010_CMD_LONG_RSP;
-
-	/* In Linux driver, MMC_CMD_APP_CMD is checked in last_opcode */
-	if (host->last_opcode == MMC_CMD_APP_CMD)
-		ccon |= FTSDC010_CMD_APP_CMD;
-
-#ifdef CONFIG_FTSDC010_SDIO
-	scon = readl(&host->reg->sdio_ctrl1);
-	if (host->card_type == MMC_TYPE_SDIO)
-		scon |= FTSDC010_SDIO_CTRL1_SDIO_ENABLE;
-	else
-		scon &= ~FTSDC010_SDIO_CTRL1_SDIO_ENABLE;
-	writel(scon, &host->reg->sdio_ctrl1);
-#endif
-
-	/* record last opcode for specifing the command type to hardware */
-	host->last_opcode = cmd->cmdidx;
-
-	/* write int_mask reg */
-	tmpmask = readl(&host->reg->int_mask);
-	tmpmask |= mask;
-	writel(tmpmask, &host->reg->int_mask);
-
-	/* write cmd reg */
-	debug("%s: ccon: %08x\n", __func__, ccon);
-	writel(ccon, &host->reg->cmd);
-
-	/* check CMD_SEND */
-	for (i = 0; i < FTSDC010_CMD_RETRY; i++) {
-		/*
-		 * If we read status register too fast
-		 * will lead hardware error and the RSP_TIMEOUT
-		 * flag will be raised incorrectly.
-		 */
-		udelay(16*FTSDC010_DELAY_UNIT);
-		sta = readl(&host->reg->status);
-
-		/* Command Complete */
-		/*
-		 * Note:
-		 *	Do not clear FTSDC010_CLR_CMD_SEND flag.
-		 *	(by writing FTSDC010_CLR_CMD_SEND bit to clear register)
-		 *	It will make the driver becomes very slow.
-		 *	If the operation hasn't been finished, hardware will
-		 *	clear this bit automatically.
-		 *	In origin, the driver will clear this flag if there is
-		 *	no data need to be read.
-		 */
-		if (sta & FTSDC010_STATUS_CMD_SEND)
-			break;
-	}
-
-	if (i > FTSDC010_CMD_RETRY) {
-		printf("%s: send command timeout\n", __func__);
-		return TIMEOUT;
-	}
-
-	/* check rsp status */
-	ret = ftsdc010_check_rsp(mmc, cmd, data);
-	if (ret)
-		return ret;
-
-	/* read response if we have RSP_OK */
-	if (ccon & FTSDC010_CMD_LONG_RSP) {
-		cmd->response[0] = readl(&host->reg->rsp3);
-		cmd->response[1] = readl(&host->reg->rsp2);
-		cmd->response[2] = readl(&host->reg->rsp1);
-		cmd->response[3] = readl(&host->reg->rsp0);
-	} else {
-		cmd->response[0] = readl(&host->reg->rsp0);
-	}
-
-	/* read/write data */
-	if (data && (data->flags & MMC_DATA_READ)) {
-		ftsdc010_pio_read(host, data->dest,
-				data->blocksize * data->blocks);
-	} else if (data && (data->flags & MMC_DATA_WRITE)) {
-		ftsdc010_pio_write(host, data->src,
-				data->blocksize * data->blocks);
-	}
-
-	/* check data status */
-	if (data) {
-		ret = ftsdc010_check_data(mmc, cmd, data);
-		if (ret)
-			return ret;
-	}
-
-	udelay(FTSDC010_DELAY_UNIT);
-	return ret;
-}
-
-static unsigned int cal_blksz(unsigned int blksz)
-{
-	unsigned int blksztwo = 0;
-
-	while (blksz >>= 1)
-		blksztwo++;
-
-	return blksztwo;
-}
-
-static int ftsdc010_setup_data(struct mmc *mmc, struct mmc_data *data)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int dcon, newmask;
-
-	/* configure data transfer paramter */
-	if (!data)
-		return 0;
-
-	if (((data->blocksize - 1) & data->blocksize) != 0) {
-		printf("%s: can't do non-power-of 2 sized block transfers"
-			" (blksz %d)\n", __func__, data->blocksize);
-		return -1;
-	}
-
-	/*
-	 * We cannot deal with unaligned blocks with more than
-	 * one block being transfered.
-	 */
-	if ((data->blocksize <= 2) && (data->blocks > 1)) {
-			printf("%s: can't do non-word sized block transfers"
-				" (blksz %d)\n", __func__, data->blocksize);
-			return -1;
-	}
-
-	/* data length */
-	dcon = data->blocksize * data->blocks;
-	writel(dcon, &host->reg->dlr);
-
-	/* write data control */
-	dcon = cal_blksz(data->blocksize);
-
-	/* add to IMASK register */
-	newmask = (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT);
-
-	/*
-	 * enable UNDERRUN will trigger interrupt immediatedly
-	 * So setup it when rsp is received successfully
-	 */
-	if (data->flags & MMC_DATA_WRITE) {
-		dcon |= FTSDC010_DCR_DATA_WRITE;
-	} else {
-		dcon &= ~FTSDC010_DCR_DATA_WRITE;
-		newmask |= FTSDC010_STATUS_FIFO_ORUN;
-	}
-	enable_imask(host->reg, newmask);
-
-#ifdef CONFIG_FTSDC010_SDIO
-	/* always reset fifo since last transfer may fail */
-	dcon |= FTSDC010_DCR_FIFO_RST;
-
-	if (data->blocks > 1)
-		dcon |= FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE;
-#endif
-
-	/* enable data transfer which will be pended until cmd is send */
-	dcon |= FTSDC010_DCR_DATA_EN;
-	writel(dcon, &host->reg->dcr);
-
-	return 0;
-}
-
-static int ftsdc010_send_request(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
-{
-	int ret;
-
-	if (data) {
-		ret = ftsdc010_setup_data(mmc, data);
-
-		if (ret) {
-			printf("%s: setup data error\n", __func__);
-			return -1;
-		}
-
-		if ((data->flags & MMC_DATA_BOTH_DIR) == MMC_DATA_BOTH_DIR) {
-			printf("%s: data is both direction\n", __func__);
-			return -1;
-		}
-	}
-
-	/* Send command */
-	ret = ftsdc010_send_cmd(mmc, cmd, data);
-	return ret;
-}
-
-static int ftsdc010_card_detect(struct mmc *mmc)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int sta;
-
-	sta = readl(&host->reg->status);
-	debug("%s: card status: %08x\n", __func__, sta);
-
-	return (sta & FTSDC010_STATUS_CARD_DETECT) ? 0 : 1;
-}
-
-static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd,
-			struct mmc_data *data)
-{
-	int ret;
-
-	if (ftsdc010_card_detect(mmc) == 0) {
-		printf("%s: no medium present\n", __func__);
-		return -1;
-	} else {
-		ret = ftsdc010_send_request(mmc, cmd, data);
-		return ret;
-	}
-}
-
-static void ftsdc010_set_clk(struct mmc *mmc)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned char clk_div;
-	unsigned int real_rate;
-	unsigned int clock;
-
-	debug("%s: mmc_set_clock: %x\n", __func__, mmc->clock);
-	clock = readl(&host->reg->ccr);
-
-	if (mmc->clock == 0) {
-		real_rate = 0;
-		clock |= FTSDC010_CCR_CLK_DIS;
-	} else {
-		debug("%s, mmc->clock: %08x, origin clock: %08x\n",
-			 __func__, mmc->clock, clock);
-
-		for (clk_div = 0; clk_div <= 127; clk_div++) {
-			real_rate = (CONFIG_SYS_CLK_FREQ / 2) /
-					(2 * (clk_div + 1));
-
-			if (real_rate <= mmc->clock)
-				break;
-		}
-
-		debug("%s: computed real_rate: %x, clk_div: %x\n",
-			 __func__, real_rate, clk_div);
-
-		if (clk_div > 127)
-			debug("%s: no match clock rate, %x\n",
-				__func__, mmc->clock);
-
-		clock = (clock & ~FTSDC010_CCR_CLK_DIV(0x7f)) |
-				FTSDC010_CCR_CLK_DIV(clk_div);
-
-		clock &= ~FTSDC010_CCR_CLK_DIS;
-	}
-
-	debug("%s, set clock: %08x\n", __func__, clock);
-	writel(clock, &host->reg->ccr);
-}
-
-static void ftsdc010_set_ios(struct mmc *mmc)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int power;
-	unsigned long val;
-	unsigned int bus_width;
-
-	debug("%s: bus_width: %x, clock: %d\n",
-		__func__, mmc->bus_width, mmc->clock);
-
-	/* set pcr: power on */
-	power = readl(&host->reg->pcr);
-	power |= FTSDC010_PCR_POWER_ON;
-	writel(power, &host->reg->pcr);
-
-	if (mmc->clock)
-		ftsdc010_set_clk(mmc);
-
-	/* set bwr: bus width reg */
-	bus_width = readl(&host->reg->bwr);
-	bus_width &= ~(FTSDC010_BWR_WIDE_8_BUS | FTSDC010_BWR_WIDE_4_BUS |
-			FTSDC010_BWR_SINGLE_BUS);
-
-	if (mmc->bus_width == 8)
-		bus_width |= FTSDC010_BWR_WIDE_8_BUS;
-	else if (mmc->bus_width == 4)
-		bus_width |= FTSDC010_BWR_WIDE_4_BUS;
-	else
-		bus_width |= FTSDC010_BWR_SINGLE_BUS;
-
-	writel(bus_width, &host->reg->bwr);
-
-	/* set fifo depth */
-	val = readl(&host->reg->feature);
-	host->fifo_len = FTSDC010_FEATURE_FIFO_DEPTH(val) * 4; /* 4 bytes */
-
-	/* set data timeout register */
-	val = -1;
-	writel(val, &host->reg->dtr);
-}
-
-static void ftsdc010_reset(struct mmc_host *host)
-{
-	unsigned int timeout;
-	unsigned int sta;
-
-	/* Do SDC_RST: Software reset for all register */
-	writel(FTSDC010_CMD_SDC_RST, &host->reg->cmd);
-
-	host->clock = 0;
-
-	/* this hardware has no reset finish flag to read */
-	/* wait 100ms maximum */
-	timeout = 100;
-
-	/* hw clears the bit when it's done */
-	while (readl(&host->reg->dtr) != 0) {
-		if (timeout == 0) {
-			printf("%s: reset timeout error\n", __func__);
-			return;
-		}
-		timeout--;
-		udelay(10*FTSDC010_DELAY_UNIT);
-	}
-
-	sta = readl(&host->reg->status);
-	if (sta & FTSDC010_STATUS_CARD_CHANGE)
-		writel(FTSDC010_CLR_CARD_CHANGE, &host->reg->clr);
-}
-
-static int ftsdc010_core_init(struct mmc *mmc)
-{
-	struct mmc_host *host = mmc->priv;
-	unsigned int mask;
-	unsigned int major, minor, revision;
-
-	/* get hardware version */
-	host->version = readl(&host->reg->rev);
-
-	major = FTSDC010_REV_MAJOR(host->version);
-	minor = FTSDC010_REV_MINOR(host->version);
-	revision = FTSDC010_REV_REVISION(host->version);
-
-	printf("ftsdc010 hardware ver: %d_%d_r%d\n", major, minor, revision);
-
-	/* Interrupt MASK register init - mask all */
-	writel(0x0, &host->reg->int_mask);
-
-	mask = FTSDC010_INT_MASK_CMD_SEND |
-		FTSDC010_INT_MASK_DATA_END |
-		FTSDC010_INT_MASK_CARD_CHANGE;
-#ifdef CONFIG_FTSDC010_SDIO
-	mask |= FTSDC010_INT_MASK_CP_READY |
-		FTSDC010_INT_MASK_CP_BUF_READY |
-		FTSDC010_INT_MASK_PLAIN_TEXT_READY |
-		FTSDC010_INT_MASK_SDIO_IRPT;
-#endif
-
-	writel(mask, &host->reg->int_mask);
-
-	return 0;
-}
-
-int ftsdc010_mmc_init(int dev_index)
-{
-	struct mmc *mmc;
-	struct mmc_host *host;
-
-	mmc = &ftsdc010_dev[dev_index];
-
-	sprintf(mmc->name, "FTSDC010 SD/MMC");
-	mmc->priv = &ftsdc010_host[dev_index];
-	mmc->send_cmd = ftsdc010_request;
-	mmc->set_ios = ftsdc010_set_ios;
-	mmc->init = ftsdc010_core_init;
-	mmc->getcd = NULL;
-	mmc->getwp = NULL;
-
-	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
-
-	mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
-
-	mmc->f_min = CONFIG_SYS_CLK_FREQ / 2 / (2*128);
-	mmc->f_max = CONFIG_SYS_CLK_FREQ / 2 / 2;
-
-	ftsdc010_host[dev_index].clock = 0;
-	ftsdc010_host[dev_index].reg = ftsdc010_get_base_mmc(dev_index);
-	mmc_register(mmc);
-
-	/* reset mmc */
-	host = (struct mmc_host *)mmc->priv;
-	ftsdc010_reset(host);
-
-	return 0;
-}
diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c
new file mode 100644
index 0000000..562b14a
--- /dev/null
+++ b/drivers/mmc/ftsdc010_mci.c
@@ -0,0 +1,377 @@
+/*
+ * Faraday MMC/SD Host Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <part.h>
+#include <mmc.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/byteorder.h>
+#include <faraday/ftsdc010.h>
+
+#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */
+#define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */
+
+struct ftsdc010_chip {
+	void __iomem *regs;
+	uint32_t wprot;   /* write protected (locked) */
+	uint32_t rate;    /* actual SD clock in Hz */
+	uint32_t sclk;    /* FTSDC010 source clock in Hz */
+	uint32_t fifo;    /* fifo depth in bytes */
+	uint32_t acmd;
+};
+
+static inline int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
+{
+	struct ftsdc010_chip *chip = mmc->priv;
+	struct ftsdc010_mmc __iomem *regs = chip->regs;
+	int ret = TIMEOUT;
+	uint32_t ts, st;
+	uint32_t cmd   = FTSDC010_CMD_IDX(mmc_cmd->cmdidx);
+	uint32_t arg   = mmc_cmd->cmdarg;
+	uint32_t flags = mmc_cmd->resp_type;
+
+	cmd |= FTSDC010_CMD_CMD_EN;
+
+	if (chip->acmd) {
+		cmd |= FTSDC010_CMD_APP_CMD;
+		chip->acmd = 0;
+	}
+
+	if (flags & MMC_RSP_PRESENT)
+		cmd |= FTSDC010_CMD_NEED_RSP;
+
+	if (flags & MMC_RSP_136)
+		cmd |= FTSDC010_CMD_LONG_RSP;
+
+	writel(FTSDC010_STATUS_RSP_MASK | FTSDC010_STATUS_CMD_SEND,
+		&regs->clr);
+	writel(arg, &regs->argu);
+	writel(cmd, &regs->cmd);
+
+	if (!(flags & (MMC_RSP_PRESENT | MMC_RSP_136))) {
+		for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+			if (readl(&regs->status) & FTSDC010_STATUS_CMD_SEND) {
+				writel(FTSDC010_STATUS_CMD_SEND, &regs->clr);
+				ret = 0;
+				break;
+			}
+		}
+	} else {
+		st = 0;
+		for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+			st = readl(&regs->status);
+			writel(st & FTSDC010_STATUS_RSP_MASK, &regs->clr);
+			if (st & FTSDC010_STATUS_RSP_MASK)
+				break;
+		}
+		if (st & FTSDC010_STATUS_RSP_CRC_OK) {
+			if (flags & MMC_RSP_136) {
+				mmc_cmd->response[0] = readl(&regs->rsp3);
+				mmc_cmd->response[1] = readl(&regs->rsp2);
+				mmc_cmd->response[2] = readl(&regs->rsp1);
+				mmc_cmd->response[3] = readl(&regs->rsp0);
+			} else {
+				mmc_cmd->response[0] = readl(&regs->rsp0);
+			}
+			ret = 0;
+		} else {
+			debug("ftsdc010: rsp err (cmd=%d, st=0x%x)\n",
+				mmc_cmd->cmdidx, st);
+		}
+	}
+
+	if (ret) {
+		debug("ftsdc010: cmd timeout (op code=%d)\n",
+			mmc_cmd->cmdidx);
+	} else if (mmc_cmd->cmdidx == MMC_CMD_APP_CMD) {
+		chip->acmd = 1;
+	}
+
+	return ret;
+}
+
+static void ftsdc010_clkset(struct mmc *mmc, uint32_t rate)
+{
+	struct ftsdc010_chip *chip = mmc->priv;
+	struct ftsdc010_mmc __iomem *regs = chip->regs;
+	uint32_t div;
+
+	for (div = 0; div < 0x7f; ++div) {
+		if (rate >= chip->sclk / (2 * (div + 1)))
+			break;
+	}
+	chip->rate = chip->sclk / (2 * (div + 1));
+
+	writel(FTSDC010_CCR_CLK_DIV(div), &regs->ccr);
+
+	if (IS_SD(mmc)) {
+		setbits_le32(&regs->ccr, FTSDC010_CCR_CLK_SD);
+
+		if (chip->rate > 25000000)
+			setbits_le32(&regs->ccr, FTSDC010_CCR_CLK_HISPD);
+		else
+			clrbits_le32(&regs->ccr, FTSDC010_CCR_CLK_HISPD);
+	}
+}
+
+static inline int ftsdc010_is_ro(struct mmc *mmc)
+{
+	struct ftsdc010_chip *chip = mmc->priv;
+	const uint8_t *csd = (const uint8_t *)mmc->csd;
+
+	return chip->wprot || (csd[1] & 0x30);
+}
+
+static int ftsdc010_wait(struct ftsdc010_mmc __iomem *regs, uint32_t mask)
+{
+	int ret = TIMEOUT;
+	uint32_t st, ts;
+
+	for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+		st = readl(&regs->status);
+		if (!(st & mask))
+			continue;
+		writel(st & mask, &regs->clr);
+		ret = 0;
+		break;
+	}
+
+	if (ret)
+		debug("ftsdc010: wait st(0x%x) timeout\n", mask);
+
+	return ret;
+}
+
+/*
+ * u-boot mmc api
+ */
+
+static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd,
+	struct mmc_data *data)
+{
+	int ret = UNUSABLE_ERR;
+	uint32_t len = 0;
+	struct ftsdc010_chip *chip = mmc->priv;
+	struct ftsdc010_mmc __iomem *regs = chip->regs;
+
+	if (data && (data->flags & MMC_DATA_WRITE) && chip->wprot) {
+		printf("ftsdc010: the card is write protected!\n");
+		return ret;
+	}
+
+	if (data) {
+		uint32_t dcr;
+
+		len = data->blocksize * data->blocks;
+
+		/* 1. data disable + fifo reset */
+		writel(FTSDC010_DCR_FIFO_RST, &regs->dcr);
+
+		/* 2. clear status register */
+		writel(FTSDC010_STATUS_DATA_MASK | FTSDC010_STATUS_FIFO_URUN
+			| FTSDC010_STATUS_FIFO_ORUN, &regs->clr);
+
+		/* 3. data timeout (1 sec) */
+		writel(chip->rate, &regs->dtr);
+
+		/* 4. data length (bytes) */
+		writel(len, &regs->dlr);
+
+		/* 5. data enable */
+		dcr = (ffs(data->blocksize) - 1) | FTSDC010_DCR_DATA_EN;
+		if (data->flags & MMC_DATA_WRITE)
+			dcr |= FTSDC010_DCR_DATA_WRITE;
+		writel(dcr, &regs->dcr);
+	}
+
+	ret = ftsdc010_send_cmd(mmc, cmd);
+	if (ret) {
+		printf("ftsdc010: CMD%d failed\n", cmd->cmdidx);
+		return ret;
+	}
+
+	if (!data)
+		return ret;
+
+	if (data->flags & MMC_DATA_WRITE) {
+		const uint8_t *buf = (const uint8_t *)data->src;
+
+		while (len > 0) {
+			int wlen;
+
+			/* wait for tx ready */
+			ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_URUN);
+			if (ret)
+				break;
+
+			/* write bytes to ftsdc010 */
+			for (wlen = 0; wlen < len && wlen < chip->fifo; ) {
+				writel(*(uint32_t *)buf, &regs->dwr);
+				buf  += 4;
+				wlen += 4;
+			}
+
+			len -= wlen;
+		}
+
+	} else {
+		uint8_t *buf = (uint8_t *)data->dest;
+
+		while (len > 0) {
+			int rlen;
+
+			/* wait for rx ready */
+			ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_ORUN);
+			if (ret)
+				break;
+
+			/* fetch bytes from ftsdc010 */
+			for (rlen = 0; rlen < len && rlen < chip->fifo; ) {
+				*(uint32_t *)buf = readl(&regs->dwr);
+				buf  += 4;
+				rlen += 4;
+			}
+
+			len -= rlen;
+		}
+
+	}
+
+	if (!ret) {
+		ret = ftsdc010_wait(regs,
+			FTSDC010_STATUS_DATA_END | FTSDC010_STATUS_DATA_ERROR);
+	}
+
+	return ret;
+}
+
+static void ftsdc010_set_ios(struct mmc *mmc)
+{
+	struct ftsdc010_chip *chip = mmc->priv;
+	struct ftsdc010_mmc __iomem *regs = chip->regs;
+
+	ftsdc010_clkset(mmc, mmc->clock);
+
+	clrbits_le32(&regs->bwr, FTSDC010_BWR_MODE_MASK);
+	switch (mmc->bus_width) {
+	case 4:
+		setbits_le32(&regs->bwr, FTSDC010_BWR_MODE_4BIT);
+		break;
+	case 8:
+		setbits_le32(&regs->bwr, FTSDC010_BWR_MODE_8BIT);
+		break;
+	default:
+		setbits_le32(&regs->bwr, FTSDC010_BWR_MODE_1BIT);
+		break;
+	}
+}
+
+static int ftsdc010_init(struct mmc *mmc)
+{
+	struct ftsdc010_chip *chip = mmc->priv;
+	struct ftsdc010_mmc __iomem *regs = chip->regs;
+	uint32_t ts;
+
+	if (readl(&regs->status) & FTSDC010_STATUS_CARD_DETECT)
+		return NO_CARD_ERR;
+
+	if (readl(&regs->status) & FTSDC010_STATUS_WRITE_PROT) {
+		printf("ftsdc010: write protected\n");
+		chip->wprot = 1;
+	}
+
+	chip->fifo = (readl(&regs->feature) & 0xff) << 2;
+
+	/* 1. chip reset */
+	writel(FTSDC010_CMD_SDC_RST, &regs->cmd);
+	for (ts = get_timer(0); get_timer(ts) < CFG_RST_TIMEOUT; ) {
+		if (readl(&regs->cmd) & FTSDC010_CMD_SDC_RST)
+			continue;
+		break;
+	}
+	if (readl(&regs->cmd) & FTSDC010_CMD_SDC_RST) {
+		printf("ftsdc010: reset failed\n");
+		return UNUSABLE_ERR;
+	}
+
+	/* 2. enter low speed mode (400k card detection) */
+	ftsdc010_clkset(mmc, 400000);
+
+	/* 3. interrupt disabled */
+	writel(0, &regs->int_mask);
+
+	return 0;
+}
+
+int ftsdc010_mmc_init(int devid)
+{
+	struct mmc *mmc;
+	struct ftsdc010_chip *chip;
+	struct ftsdc010_mmc __iomem *regs;
+#ifdef CONFIG_FTSDC010_BASE_LIST
+	uint32_t base_list[] = CONFIG_FTSDC010_BASE_LIST;
+
+	if (devid < 0 || devid >= ARRAY_SIZE(base_list))
+		return -1;
+	regs = (void __iomem *)base_list[devid];
+#else
+	regs = (void __iomem *)(CONFIG_FTSDC010_BASE + (devid << 20));
+#endif
+
+	mmc = malloc(sizeof(struct mmc));
+	if (!mmc)
+		return -ENOMEM;
+	memset(mmc, 0, sizeof(struct mmc));
+
+	chip = malloc(sizeof(struct ftsdc010_chip));
+	if (!chip) {
+		free(mmc);
+		return -ENOMEM;
+	}
+	memset(chip, 0, sizeof(struct ftsdc010_chip));
+
+	chip->regs = regs;
+	mmc->priv  = chip;
+
+	sprintf(mmc->name, "ftsdc010");
+	mmc->send_cmd  = ftsdc010_request;
+	mmc->set_ios   = ftsdc010_set_ios;
+	mmc->init      = ftsdc010_init;
+
+	mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz;
+	switch (readl(&regs->bwr) & FTSDC010_BWR_CAPS_MASK) {
+	case FTSDC010_BWR_CAPS_4BIT:
+		mmc->host_caps |= MMC_MODE_4BIT;
+		break;
+	case FTSDC010_BWR_CAPS_8BIT:
+		mmc->host_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT;
+		break;
+	default:
+		break;
+	}
+
+#ifdef CONFIG_SYS_CLK_FREQ
+	chip->sclk = CONFIG_SYS_CLK_FREQ;
+#else
+	chip->sclk = clk_get_rate("SDC");
+#endif
+
+	mmc->voltages  = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->f_max     = chip->sclk / 2;
+	mmc->f_min     = chip->sclk / 0x100;
+	mmc->block_dev.part_type = PART_TYPE_DOS;
+
+	mmc_register(mmc);
+
+	return 0;
+}
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 2590f1b..0a2f535 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -524,48 +524,70 @@ static int sd_send_op_cond(struct mmc *mmc)
 	return 0;
 }
 
-static int mmc_send_op_cond(struct mmc *mmc)
+/* We pass in the cmd since otherwise the init seems to fail */
+static int mmc_send_op_cond_iter(struct mmc *mmc, struct mmc_cmd *cmd,
+		int use_arg)
 {
-	int timeout = 10000;
-	struct mmc_cmd cmd;
 	int err;
 
+	cmd->cmdidx = MMC_CMD_SEND_OP_COND;
+	cmd->resp_type = MMC_RSP_R3;
+	cmd->cmdarg = 0;
+	if (use_arg && !mmc_host_is_spi(mmc)) {
+		cmd->cmdarg =
+			(mmc->voltages &
+			(mmc->op_cond_response & OCR_VOLTAGE_MASK)) |
+			(mmc->op_cond_response & OCR_ACCESS_MODE);
+
+		if (mmc->host_caps & MMC_MODE_HC)
+			cmd->cmdarg |= OCR_HCS;
+	}
+	err = mmc_send_cmd(mmc, cmd, NULL);
+	if (err)
+		return err;
+	mmc->op_cond_response = cmd->response[0];
+	return 0;
+}
+
+int mmc_send_op_cond(struct mmc *mmc)
+{
+	struct mmc_cmd cmd;
+	int err, i;
+
 	/* Some cards seem to need this */
 	mmc_go_idle(mmc);
 
  	/* Asking to the card its capabilities */
- 	cmd.cmdidx = MMC_CMD_SEND_OP_COND;
- 	cmd.resp_type = MMC_RSP_R3;
- 	cmd.cmdarg = 0;
-
- 	err = mmc_send_cmd(mmc, &cmd, NULL);
+	mmc->op_cond_pending = 1;
+	for (i = 0; i < 2; i++) {
+		err = mmc_send_op_cond_iter(mmc, &cmd, i != 0);
+		if (err)
+			return err;
 
- 	if (err)
- 		return err;
+		/* exit if not busy (flag seems to be inverted) */
+		if (mmc->op_cond_response & OCR_BUSY)
+			return 0;
+	}
+	return IN_PROGRESS;
+}
 
- 	udelay(1000);
+int mmc_complete_op_cond(struct mmc *mmc)
+{
+	struct mmc_cmd cmd;
+	int timeout = 1000;
+	uint start;
+	int err;
 
+	mmc->op_cond_pending = 0;
+	start = get_timer(0);
 	do {
-		cmd.cmdidx = MMC_CMD_SEND_OP_COND;
-		cmd.resp_type = MMC_RSP_R3;
-		cmd.cmdarg = (mmc_host_is_spi(mmc) ? 0 :
-				(mmc->voltages &
-				(cmd.response[0] & OCR_VOLTAGE_MASK)) |
-				(cmd.response[0] & OCR_ACCESS_MODE));
-
-		if (mmc->host_caps & MMC_MODE_HC)
-			cmd.cmdarg |= OCR_HCS;
-
-		err = mmc_send_cmd(mmc, &cmd, NULL);
-
+		err = mmc_send_op_cond_iter(mmc, &cmd, 1);
 		if (err)
 			return err;
-
-		udelay(1000);
-	} while (!(cmd.response[0] & OCR_BUSY) && timeout--);
-
-	if (timeout <= 0)
-		return UNUSABLE_ERR;
+		if (get_timer(start) > timeout)
+			return UNUSABLE_ERR;
+		udelay(100);
+	} while (!(mmc->op_cond_response & OCR_BUSY));
 
 	if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
 		cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
@@ -1274,7 +1296,7 @@ block_dev_desc_t *mmc_get_dev(int dev)
 }
 #endif
 
-int mmc_init(struct mmc *mmc)
+int mmc_start_init(struct mmc *mmc)
 {
 	int err;
 
@@ -1314,17 +1336,48 @@ int mmc_init(struct mmc *mmc)
 	if (err == TIMEOUT) {
 		err = mmc_send_op_cond(mmc);
 
-		if (err) {
+		if (err && err != IN_PROGRESS) {
 			printf("Card did not respond to voltage select!\n");
 			return UNUSABLE_ERR;
 		}
 	}
 
-	err = mmc_startup(mmc);
+	if (err == IN_PROGRESS)
+		mmc->init_in_progress = 1;
+
+	return err;
+}
+
+static int mmc_complete_init(struct mmc *mmc)
+{
+	int err = 0;
+
+	if (mmc->op_cond_pending)
+		err = mmc_complete_op_cond(mmc);
+
+	if (!err)
+		err = mmc_startup(mmc);
 	if (err)
 		mmc->has_init = 0;
 	else
 		mmc->has_init = 1;
+	mmc->init_in_progress = 0;
+	return err;
+}
+
+int mmc_init(struct mmc *mmc)
+{
+	int err = IN_PROGRESS;
+	unsigned start = get_timer(0);
+
+	if (mmc->has_init)
+		return 0;
+	if (!mmc->init_in_progress)
+		err = mmc_start_init(mmc);
+
+	if (!err || err == IN_PROGRESS)
+		err = mmc_complete_init(mmc);
+	debug("%s: %d, time %lu\n", __func__, err, get_timer(start));
 	return err;
 }
 
@@ -1362,6 +1415,25 @@ int get_mmc_num(void)
 	return cur_dev_num;
 }
 
+void mmc_set_preinit(struct mmc *mmc, int preinit)
+{
+	mmc->preinit = preinit;
+}
+
+static void do_preinit(void)
+{
+	struct mmc *m;
+	struct list_head *entry;
+
+	list_for_each(entry, &mmc_devices) {
+		m = list_entry(entry, struct mmc, link);
+
+		if (m->preinit)
+			mmc_start_init(m);
+	}
+}
+
+
 int mmc_initialize(bd_t *bis)
 {
 	INIT_LIST_HEAD (&mmc_devices);
@@ -1372,5 +1444,6 @@ int mmc_initialize(bd_t *bis)
 
 	print_mmc_devices(',');
 
+	do_preinit();
 	return 0;
 }
diff --git a/drivers/mmc/mv_sdhci.c b/drivers/mmc/mv_sdhci.c
index 2fe34b6..63e1f90 100644
--- a/drivers/mmc/mv_sdhci.c
+++ b/drivers/mmc/mv_sdhci.c
@@ -51,6 +51,5 @@ int mv_sdh_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks)
 		host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16;
 	else
 		host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
-	add_sdhci(host, max_clk, min_clk);
-	return 0;
+	return add_sdhci(host, max_clk, min_clk);
 }
diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
index dc49d37..e50ff92 100644
--- a/drivers/mmc/s5p_sdhci.c
+++ b/drivers/mmc/s5p_sdhci.c
@@ -94,6 +94,5 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width)
 
 	host->host_caps = MMC_MODE_HC;
 
-	add_sdhci(host, 52000000, 400000);
-	return 0;
+	return add_sdhci(host, 52000000, 400000);
 }
diff --git a/drivers/mmc/spear_sdhci.c b/drivers/mmc/spear_sdhci.c
new file mode 100644
index 0000000..23f1f4b
--- /dev/null
+++ b/drivers/mmc/spear_sdhci.c
@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2012
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+int spear_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks)
+{
+	struct sdhci_host *host = NULL;
+	host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
+	if (!host) {
+		printf("sdhci host malloc fail!\n");
+		return 1;
+	}
+
+	host->name = "sdhci";
+	host->ioaddr = (void *)regbase;
+	host->quirks = quirks;
+
+	if (quirks & SDHCI_QUIRK_REG32_RW)
+		host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16;
+	else
+		host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+
+	add_sdhci(host, max_clk, min_clk);
+	return 0;
+}
diff --git a/drivers/mmc/spl_mmc.c b/drivers/mmc/spl_mmc.c
deleted file mode 100644
index 7efdcb8..0000000
--- a/drivers/mmc/spl_mmc.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Aneesh V <aneesh@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <spl.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <mmc.h>
-#include <fat.h>
-#include <version.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void mmc_load_image_raw(struct mmc *mmc)
-{
-	unsigned long err;
-	u32 image_size_sectors;
-	struct image_header *header;
-
-	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
-						sizeof(struct image_header));
-
-	/* read image header to find the image size & load address */
-	err = mmc->block_dev.block_read(0,
-			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 1,
-			header);
-
-	if (err == 0)
-		goto end;
-
-	spl_parse_image_header(header);
-
-	/* convert size to sectors - round up */
-	image_size_sectors = (spl_image.size + mmc->read_bl_len - 1) /
-				mmc->read_bl_len;
-
-	/* Read the header too to avoid extra memcpy */
-	err = mmc->block_dev.block_read(0,
-			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
-			image_size_sectors, (void *)spl_image.load_addr);
-
-end:
-	if (err == 0) {
-		printf("spl: mmc blk read err - %lu\n", err);
-		hang();
-	}
-}
-
-#ifdef CONFIG_SPL_FAT_SUPPORT
-static void mmc_load_image_fat(struct mmc *mmc)
-{
-	int err;
-	struct image_header *header;
-
-	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
-						sizeof(struct image_header));
-
-	err = fat_register_device(&mmc->block_dev,
-				CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION);
-	if (err) {
-		printf("spl: fat register err - %d\n", err);
-		hang();
-	}
-
-	err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
-				header, sizeof(struct image_header));
-	if (err <= 0)
-		goto end;
-
-	spl_parse_image_header(header);
-
-	err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
-				(u8 *)spl_image.load_addr, 0);
-
-end:
-	if (err <= 0) {
-		printf("spl: error reading image %s, err - %d\n",
-			CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, err);
-		hang();
-	}
-}
-#endif
-
-void spl_mmc_load_image(void)
-{
-	struct mmc *mmc;
-	int err;
-	u32 boot_mode;
-
-	mmc_initialize(gd->bd);
-	/* We register only one device. So, the dev id is always 0 */
-	mmc = find_mmc_device(0);
-	if (!mmc) {
-		puts("spl: mmc device not found!!\n");
-		hang();
-	}
-
-	err = mmc_init(mmc);
-	if (err) {
-		printf("spl: mmc init failed: err - %d\n", err);
-		hang();
-	}
-	boot_mode = spl_boot_mode();
-	if (boot_mode == MMCSD_MODE_RAW) {
-		debug("boot mode - RAW\n");
-		mmc_load_image_raw(mmc);
-#ifdef CONFIG_SPL_FAT_SUPPORT
-	} else if (boot_mode == MMCSD_MODE_FAT) {
-		debug("boot mode - FAT\n");
-		mmc_load_image_fat(mmc);
-#endif
-	} else {
-		puts("spl: wrong MMC boot mode\n");
-		hang();
-	}
-}
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 22d8440..25f8752 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -38,6 +38,7 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
+#include <asm/unaligned.h>
 #include <environment.h>
 #include <mtd/cfi_flash.h>
 #include <watchdog.h>
@@ -183,16 +184,16 @@ u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64")));
 flash_info_t *flash_get_info(ulong base)
 {
 	int i;
-	flash_info_t *info = NULL;
+	flash_info_t *info;
 
 	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		info = & flash_info[i];
+		info = &flash_info[i];
 		if (info->size && info->start[0] <= base &&
 		    base <= info->start[0] + info->size - 1)
-			break;
+			return info;
 	}
 
-	return info;
+	return NULL;
 }
 #endif
 
@@ -1640,9 +1641,10 @@ static void cfi_reverse_geometry(struct cfi_qry *qry)
 	u32 tmp;
 
 	for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) {
-		tmp = qry->erase_region_info[i];
-		qry->erase_region_info[i] = qry->erase_region_info[j];
-		qry->erase_region_info[j] = tmp;
+		tmp = get_unaligned(&(qry->erase_region_info[i]));
+		put_unaligned(get_unaligned(&(qry->erase_region_info[j])),
+			      &(qry->erase_region_info[i]));
+		put_unaligned(tmp, &(qry->erase_region_info[j]));
 	}
 }
 
@@ -2073,8 +2075,8 @@ ulong flash_get_size (phys_addr_t base, int banknum)
 	info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE);
 
 	if (flash_detect_cfi (info, &qry)) {
-		info->vendor = le16_to_cpu(qry.p_id);
-		info->ext_addr = le16_to_cpu(qry.p_adr);
+		info->vendor = le16_to_cpu(get_unaligned(&(qry.p_id)));
+		info->ext_addr = le16_to_cpu(get_unaligned(&(qry.p_adr)));
 		num_erase_regions = qry.num_erase_regions;
 
 		if (info->ext_addr) {
@@ -2163,7 +2165,8 @@ ulong flash_get_size (phys_addr_t base, int banknum)
 				break;
 			}
 
-			tmp = le32_to_cpu(qry.erase_region_info[i]);
+			tmp = le32_to_cpu(get_unaligned(
+						&(qry.erase_region_info[i])));
 			debug("erase region %u: 0x%08lx\n", i, tmp);
 
 			erase_region_count = (tmp & 0xffff) + 1;
diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c
index bc558c4..dad30b5 100644
--- a/drivers/mtd/spi/spansion.c
+++ b/drivers/mtd/spi/spansion.c
@@ -94,7 +94,7 @@ static const struct spansion_spi_flash_params spansion_spi_flash_table[] = {
 		.idcode2 = 0x4d01,
 		.pages_per_sector = 256,
 		.nr_sectors = 256,
-		.name = "S25FL129P_64K",
+		.name = "S25FL129P_64K/S25FL128S",
 	},
 	{
 		.idcode1 = 0x0219,
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c63398e..0ffd59d 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -122,8 +122,6 @@ static int bfin_EMAC_send(struct eth_device *dev, void *packet, int length)
 {
 	int i;
 	int result = 0;
-	unsigned int *buf;
-	buf = (unsigned int *)packet;
 
 	if (length <= 0) {
 		printf("Ethernet: bad packet size: %d\n", length);
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index f191c79..9aaa828 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -46,6 +46,7 @@ COBJS-$(CONFIG_PPC_P4080) += p4080.o
 COBJS-$(CONFIG_PPC_P5020) += p5020.o
 COBJS-$(CONFIG_PPC_P5040) += p5040.o
 COBJS-$(CONFIG_PPC_T4240) += t4240.o
+COBJS-$(CONFIG_PPC_T4160) += t4240.o
 COBJS-$(CONFIG_PPC_B4420) += b4860.o
 COBJS-$(CONFIG_PPC_B4860) += b4860.o
 endif
diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c
index 8cde7af..3b5defe 100644
--- a/drivers/net/fm/b4860.c
+++ b/drivers/net/fm/b4860.c
@@ -55,8 +55,10 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	if (is_device_disabled(port))
 		return PHY_INTERFACE_MODE_NONE;
 
-	if ((port == FM1_10GEC1 || port == FM1_10GEC2)
-			&& (is_serdes_configured(XAUI_FM1)))
+	/*B4860 has two 10Gig Mac*/
+	if ((port == FM1_10GEC1 || port == FM1_10GEC2)	&&
+	    ((is_serdes_configured(XAUI_FM1_MAC9))	||
+	    (is_serdes_configured(XAUI_FM1_MAC10))))
 		return PHY_INTERFACE_MODE_XGMII;
 
 	/* Fix me need to handle RGMII here first */
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 54b142f..9b139ee 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -568,6 +568,8 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
 	num = fm_eth->num;
 
 #ifdef CONFIG_SYS_FMAN_V3
+	if (fm_eth->type == FM_ETH_10G_E)
+		num += 8;
 	base = &reg->memac[num].fm_memac;
 	phyregs = &reg->memac[num].fm_memac_mdio;
 #else
diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h
index 228df33..ba581e9 100644
--- a/drivers/net/fm/fm.h
+++ b/drivers/net/fm/fm.h
@@ -152,4 +152,6 @@ struct fm_eth {
 #define MAX_RXBUF_LOG2		11
 #define MAX_RXBUF_LEN		(1 << MAX_RXBUF_LOG2)
 
+#define PORT_IS_ENABLED(port)	fm_info[fm_port_to_index(port)].enabled
+
 #endif /* __FM_H__ */
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index ae389b8..5908c32 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -74,9 +74,15 @@ struct fm_eth_info fm_info[] = {
 #if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
 	FM_TGEC_INFO_INITIALIZER(1, 1),
 #endif
+#if (CONFIG_SYS_NUM_FM1_10GEC >= 2)
+	FM_TGEC_INFO_INITIALIZER(1, 2),
+#endif
 #if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
 	FM_TGEC_INFO_INITIALIZER(2, 1),
 #endif
+#if (CONFIG_SYS_NUM_FM2_10GEC >= 2)
+	FM_TGEC_INFO_INITIALIZER(2, 2),
+#endif
 };
 
 int fm_standard_init(bd_t *bis)
@@ -232,6 +238,26 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
 		return ;
 	}
 
+#ifdef CONFIG_SYS_FMAN_V3
+	/*
+	 * Physically FM1_DTSEC9 and FM1_10GEC1 use the same dual-role MAC, when
+	 * FM1_10GEC1 is enabled and  FM1_DTSEC9 is disabled, ensure that the
+	 * dual-role MAC is not disabled, ditto for other dual-role MACs.
+	 */
+	if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))	||
+	    ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2)))	||
+	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))	||
+	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10)))
+#if (CONFIG_SYS_NUM_FMAN == 2)
+										||
+	    ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1)))	||
+	    ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2)))	||
+	    ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9)))	||
+	    ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
+#endif
+	)
+		return;
+#endif
 	/* board code might have caused offset to change */
 	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
 
@@ -249,10 +275,15 @@ void fdt_fixup_fman_ethernet(void *blob)
 {
 	int i;
 
+#ifdef CONFIG_SYS_FMAN_V3
+	for (i = 0; i < ARRAY_SIZE(fm_info); i++)
+		ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
+#else
 	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
 		if (fm_info[i].type == FM_ETH_1G_E)
 			ft_fixup_port(blob, &fm_info[i], "fsl,fman-1g-mac");
 		else
 			ft_fixup_port(blob, &fm_info[i], "fsl,fman-10g-mac");
 	}
+#endif
 }
diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c
index 48c530c..275395f 100644
--- a/drivers/net/fm/t4240.c
+++ b/drivers/net/fm/t4240.c
@@ -70,12 +70,18 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	if (is_device_disabled(port))
 		return PHY_INTERFACE_MODE_NONE;
 
-	if ((port == FM1_10GEC1 || port == FM1_10GEC2)
-			&& (is_serdes_configured(XAUI_FM1)))
+	if ((port == FM1_10GEC1 || port == FM1_10GEC2) &&
+	    ((is_serdes_configured(XAUI_FM1_MAC9))	||
+	     (is_serdes_configured(XAUI_FM1_MAC10))	||
+	     (is_serdes_configured(XFI_FM1_MAC9))	||
+	     (is_serdes_configured(XFI_FM1_MAC10))))
 		return PHY_INTERFACE_MODE_XGMII;
 
-	if ((port == FM2_10GEC1 || port == FM2_10GEC2)
-			&& (is_serdes_configured(XAUI_FM2)))
+	if ((port == FM2_10GEC1 || port == FM2_10GEC2) &&
+	    ((is_serdes_configured(XAUI_FM2_MAC9))	||
+	     (is_serdes_configured(XAUI_FM2_MAC10))	||
+	     (is_serdes_configured(XFI_FM2_MAC9))	||
+	     (is_serdes_configured(XFI_FM2_MAC10))))
 		return PHY_INTERFACE_MODE_XGMII;
 
 #define FSL_CORENET_RCWSR13_EC1			0x60000000 /* bits 417..418 */
diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
index 78447b7..84ce736 100644
--- a/drivers/net/phy/teranetics.c
+++ b/drivers/net/phy/teranetics.c
@@ -34,9 +34,21 @@ int tn2020_config(struct phy_device *phydev)
 		unsigned short restart_an = (MDIO_AN_CTRL1_RESTART |
 						MDIO_AN_CTRL1_ENABLE |
 						MDIO_AN_CTRL1_XNP);
+		u8 phy_hwversion;
 
-		phy_write(phydev, 30, 93, 2);
-		phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an);
+		/*
+		 * bit 15:12 of register 30.32 indicates PHY hardware
+		 * version. It can be used to distinguish TN80xx from
+		 * TN2020. TN2020 needs write 0x2 to 30.93, but TN80xx
+		 * needs 0x1.
+		 */
+		phy_hwversion = (phy_read(phydev, 30, 32) >> 12) & 0xf;
+		if (phy_hwversion <= 3) {
+			phy_write(phydev, 30, 93, 2);
+			phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an);
+		} else {
+			phy_write(phydev, 30, 93, 1);
+		}
 	}
 
 	return 0;
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 6c5cb99..c283d82 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -48,6 +48,19 @@
 #define MIIM_VSC8601_SKEW_CTRL		0x1c
 
 #define PHY_EXT_PAGE_ACCESS    0x1f
+#define PHY_EXT_PAGE_ACCESS_GENERAL	0x10
+#define PHY_EXT_PAGE_ACCESS_EXTENDED3	0x3
+
+/* Vitesse VSC8574 control register */
+#define MIIM_VSC8574_MAC_SERDES_CON	0x10
+#define MIIM_VSC8574_MAC_SERDES_ANEG	0x80
+#define MIIM_VSC8574_GENERAL18		0x12
+#define MIIM_VSC8574_GENERAL19		0x13
+
+/* Vitesse VSC8574 gerenal purpose register 18 */
+#define MIIM_VSC8574_18G_SGMII		0x80f0
+#define MIIM_VSC8574_18G_QSGMII		0x80e0
+#define MIIM_VSC8574_18G_CMDSTAT	0x8000
 
 /* CIS8201 */
 static int vitesse_config(struct phy_device *phydev)
@@ -145,6 +158,49 @@ static int vsc8601_config(struct phy_device *phydev)
 	return 0;
 }
 
+static int vsc8574_config(struct phy_device *phydev)
+{
+	u32 val;
+	/* configure regiser 19G for MAC */
+	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
+		  PHY_EXT_PAGE_ACCESS_GENERAL);
+
+	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19);
+	if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
+		/* set bit 15:14 to '01' for QSGMII mode */
+		val = (val & 0x3fff) | (1 << 14);
+		phy_write(phydev, MDIO_DEVAD_NONE,
+			  MIIM_VSC8574_GENERAL19, val);
+		/* Enable 4 ports MAC QSGMII */
+		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
+			  MIIM_VSC8574_18G_QSGMII);
+	} else {
+		/* set bit 15:14 to '00' for SGMII mode */
+		val = val & 0x3fff;
+		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19, val);
+		/* Enable 4 ports MAC SGMII */
+		phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
+			  MIIM_VSC8574_18G_SGMII);
+	}
+	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
+	/* When bit 15 is cleared the command has completed */
+	while (val & MIIM_VSC8574_18G_CMDSTAT)
+		val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
+
+	/* Enable Serdes Auto-negotiation */
+	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
+		  PHY_EXT_PAGE_ACCESS_EXTENDED3);
+	val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON);
+	val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
+	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON, val);
+
+	phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
+
+	genphy_config_aneg(phydev);
+
+	return 0;
+}
+
 static struct phy_driver VSC8211_driver = {
 	.name	= "Vitesse VSC8211",
 	.uid	= 0xfc4b0,
@@ -185,6 +241,16 @@ static struct phy_driver VSC8234_driver = {
 	.shutdown = &genphy_shutdown,
 };
 
+static struct phy_driver VSC8574_driver = {
+	.name = "Vitesse VSC8574",
+	.uid = 0x704a0,
+	.mask = 0xffff0,
+	.features = PHY_GBIT_FEATURES,
+	.config = &vsc8574_config,
+	.startup = &vitesse_startup,
+	.shutdown = &genphy_shutdown,
+};
+
 static struct phy_driver VSC8601_driver = {
 	.name = "Vitesse VSC8601",
 	.uid = 0x70420,
@@ -244,6 +310,7 @@ int phy_vitesse_init(void)
 	phy_register(&VSC8244_driver);
 	phy_register(&VSC8211_driver);
 	phy_register(&VSC8221_driver);
+	phy_register(&VSC8574_driver);
 	phy_register(&VSC8662_driver);
 	phy_register(&cis8201_driver);
 	phy_register(&cis8204_driver);
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index a290073..f63a069 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -484,7 +484,7 @@ static void smc911x_reset(struct eth_device *dev)
 		while (timeout-- &&
 			!(smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY))
 			udelay(10);
-		if (!timeout) {
+		if (timeout < 0) {
 			printf(DRIVERNAME
 				": timeout waiting for PM restore\n");
 			return;
@@ -500,7 +500,7 @@ static void smc911x_reset(struct eth_device *dev)
 	while (timeout-- && smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
 		udelay(10);
 
-	if (!timeout) {
+	if (timeout < 0) {
 		printf(DRIVERNAME ": reset timeout\n");
 		return;
 	}
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index fbc4e97..442b7ea 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -52,6 +52,7 @@ COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
 COBJS-$(CONFIG_SANDBOX_SERIAL) += sandbox.o
 COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
 COBJS-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o
+COBJS-$(CONFIG_BFIN_SERIAL) += serial_bfin.o
 
 ifndef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_USB_TTY) += usbtty.o
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 9f04643..daa8003 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -143,7 +143,6 @@ serial_initfunc(au1x00_serial_initialize);
 serial_initfunc(asc_serial_initialize);
 serial_initfunc(jz_serial_initialize);
 serial_initfunc(mpc5xx_serial_initialize);
-serial_initfunc(mpc8220_serial_initialize);
 serial_initfunc(mpc8260_scc_serial_initialize);
 serial_initfunc(mpc8260_smc_serial_initialize);
 serial_initfunc(mpc85xx_serial_initialize);
@@ -236,7 +235,6 @@ void serial_initialize(void)
 	asc_serial_initialize();
 	jz_serial_initialize();
 	mpc5xx_serial_initialize();
-	mpc8220_serial_initialize();
 	mpc8260_scc_serial_initialize();
 	mpc8260_smc_serial_initialize();
 	mpc85xx_serial_initialize();
diff --git a/drivers/serial/serial_bfin.c b/drivers/serial/serial_bfin.c
new file mode 100644
index 0000000..0443b84
--- /dev/null
+++ b/drivers/serial/serial_bfin.c
@@ -0,0 +1,411 @@
+/*
+ * U-boot - serial.c Blackfin Serial Driver
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * Copyright (c) 2003	Bas Vermeulen <bas@buyways.nl>,
+ *			BuyWays B.V. (www.buyways.nl)
+ *
+ * Based heavily on:
+ * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs.
+ * Copyright(c) 2003	Metrowerks	<mwaddel@metrowerks.com>
+ * Copyright(c)	2001	Tony Z. Kou	<tonyko@arcturusnetworks.com>
+ * Copyright(c)	2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com>
+ *
+ * Based on code from 68328 version serial driver imlpementation which was:
+ * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
+ * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* Anomaly notes:
+ *  05000086 - we don't support autobaud
+ *  05000099 - we only use DR bit, so losing others is not a problem
+ *  05000100 - we don't use the UART_IIR register
+ *  05000215 - we poll the uart (no dma/interrupts)
+ *  05000225 - no workaround possible, but this shouldnt cause errors ...
+ *  05000230 - we tweak the baud rate calculation slightly
+ *  05000231 - we always use 1 stop bit
+ *  05000309 - we always enable the uart before we modify it in anyway
+ *  05000350 - we always enable the uart regardless of boot mode
+ *  05000363 - we don't support break signals, so don't generate one
+ */
+
+#include <common.h>
+#include <post.h>
+#include <watchdog.h>
+#include <serial.h>
+#include <linux/compiler.h>
+#include <asm/blackfin.h>
+#include <asm/serial.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_UART_CONSOLE
+
+#ifdef CONFIG_DEBUG_SERIAL
+static uart_lsr_t cached_lsr[256];
+static uart_lsr_t cached_rbr[256];
+static size_t cache_count;
+
+/* The LSR is read-to-clear on some parts, so we have to make sure status
+ * bits aren't inadvertently lost when doing various tests.  This also
+ * works around anomaly 05000099 at the same time by keeping a cumulative
+ * tally of all the status bits.
+ */
+static uart_lsr_t uart_lsr_save;
+static uart_lsr_t uart_lsr_read(uint32_t uart_base)
+{
+	uart_lsr_t lsr = _lsr_read(pUART);
+	uart_lsr_save |= (lsr & (OE|PE|FE|BI));
+	return lsr | uart_lsr_save;
+}
+/* Just do the clear for everyone since it can't hurt. */
+static void uart_lsr_clear(uint32_t uart_base)
+{
+	uart_lsr_save = 0;
+	_lsr_write(pUART, -1);
+}
+#else
+/* When debugging is disabled, we only care about the DR bit, so if other
+ * bits get set/cleared, we don't really care since we don't read them
+ * anyways (and thus anomaly 05000099 is irrelevant).
+ */
+static inline uart_lsr_t uart_lsr_read(uint32_t uart_base)
+{
+	return _lsr_read(pUART);
+}
+static void uart_lsr_clear(uint32_t uart_base)
+{
+	_lsr_write(pUART, -1);
+}
+#endif
+
+static void uart_putc(uint32_t uart_base, const char c)
+{
+	/* send a \r for compatibility */
+	if (c == '\n')
+		serial_putc('\r');
+
+	WATCHDOG_RESET();
+
+	/* wait for the hardware fifo to clear up */
+	while (!(uart_lsr_read(uart_base) & THRE))
+		continue;
+
+	/* queue the character for transmission */
+	bfin_write(&pUART->thr, c);
+	SSYNC();
+
+	WATCHDOG_RESET();
+}
+
+static int uart_tstc(uint32_t uart_base)
+{
+	WATCHDOG_RESET();
+	return (uart_lsr_read(uart_base) & DR) ? 1 : 0;
+}
+
+static int uart_getc(uint32_t uart_base)
+{
+	uint16_t uart_rbr_val;
+
+	/* wait for data ! */
+	while (!uart_tstc(uart_base))
+		continue;
+
+	/* grab the new byte */
+	uart_rbr_val = bfin_read(&pUART->rbr);
+
+#ifdef CONFIG_DEBUG_SERIAL
+	/* grab & clear the LSR */
+	uart_lsr_t uart_lsr_val = uart_lsr_read(uart_base);
+
+	cached_lsr[cache_count] = uart_lsr_val;
+	cached_rbr[cache_count] = uart_rbr_val;
+	cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr);
+
+	if (uart_lsr_val & (OE|PE|FE|BI)) {
+		printf("\n[SERIAL ERROR]\n");
+		do {
+			--cache_count;
+			printf("\t%3zu: RBR=0x%02x LSR=0x%02x\n", cache_count,
+				cached_rbr[cache_count], cached_lsr[cache_count]);
+		} while (cache_count > 0);
+		return -1;
+	}
+#endif
+	uart_lsr_clear(uart_base);
+
+	return uart_rbr_val;
+}
+
+#if CONFIG_POST & CONFIG_SYS_POST_UART
+# define LOOP(x) x
+#else
+# define LOOP(x)
+#endif
+
+#if BFIN_UART_HW_VER < 4
+
+LOOP(
+static void uart_loop(uint32_t uart_base, int state)
+{
+	u16 mcr;
+
+	/* Drain the TX fifo first so bytes don't come back */
+	while (!(uart_lsr_read(uart_base) & TEMT))
+		continue;
+
+	mcr = bfin_read(&pUART->mcr);
+	if (state)
+		mcr |= LOOP_ENA | MRTS;
+	else
+		mcr &= ~(LOOP_ENA | MRTS);
+	bfin_write(&pUART->mcr, mcr);
+}
+)
+
+#else
+
+LOOP(
+static void uart_loop(uint32_t uart_base, int state)
+{
+	u32 control;
+
+	/* Drain the TX fifo first so bytes don't come back */
+	while (!(uart_lsr_read(uart_base) & TEMT))
+		continue;
+
+	control = bfin_read(&pUART->control);
+	if (state)
+		control |= LOOP_ENA | MRTS;
+	else
+		control &= ~(LOOP_ENA | MRTS);
+	bfin_write(&pUART->control, control);
+}
+)
+
+#endif
+
+static inline void __serial_set_baud(uint32_t uart_base, uint32_t baud)
+{
+#ifdef CONFIG_DEBUG_EARLY_SERIAL
+	serial_early_set_baud(uart_base, baud);
+#else
+	uint16_t divisor = (get_uart_clk() + (baud * 8)) / (baud * 16)
+			- ANOMALY_05000230;
+
+	/* Program the divisor to get the baud rate we want */
+	serial_set_divisor(uart_base, divisor);
+#endif
+}
+
+static void uart_puts(uint32_t uart_base, const char *s)
+{
+	while (*s)
+		uart_putc(uart_base, *s++);
+}
+
+#define DECL_BFIN_UART(n) \
+static int uart##n##_init(void) \
+{ \
+	const unsigned short pins[] = { _P_UART(n, RX), _P_UART(n, TX), 0, }; \
+	peripheral_request_list(pins, "bfin-uart"); \
+	uart_init(MMR_UART(n)); \
+	__serial_set_baud(MMR_UART(n), gd->baudrate); \
+	uart_lsr_clear(MMR_UART(n)); \
+	return 0; \
+} \
+\
+static int uart##n##_uninit(void) \
+{ \
+	return serial_early_uninit(MMR_UART(n)); \
+} \
+\
+static void uart##n##_setbrg(void) \
+{ \
+	__serial_set_baud(MMR_UART(n), gd->baudrate); \
+} \
+\
+static int uart##n##_getc(void) \
+{ \
+	return uart_getc(MMR_UART(n)); \
+} \
+\
+static int uart##n##_tstc(void) \
+{ \
+	return uart_tstc(MMR_UART(n)); \
+} \
+\
+static void uart##n##_putc(const char c) \
+{ \
+	uart_putc(MMR_UART(n), c); \
+} \
+\
+static void uart##n##_puts(const char *s) \
+{ \
+	uart_puts(MMR_UART(n), s); \
+} \
+\
+LOOP( \
+static void uart##n##_loop(int state) \
+{ \
+	uart_loop(MMR_UART(n), state); \
+} \
+) \
+\
+struct serial_device bfin_serial##n##_device = { \
+	.name   = "bfin_uart"#n, \
+	.start  = uart##n##_init, \
+	.stop   = uart##n##_uninit, \
+	.setbrg = uart##n##_setbrg, \
+	.getc   = uart##n##_getc, \
+	.tstc   = uart##n##_tstc, \
+	.putc   = uart##n##_putc, \
+	.puts   = uart##n##_puts, \
+	LOOP(.loop = uart##n##_loop) \
+};
+
+#ifdef UART0_RBR
+DECL_BFIN_UART(0)
+#endif
+#ifdef UART1_RBR
+DECL_BFIN_UART(1)
+#endif
+#ifdef UART2_RBR
+DECL_BFIN_UART(2)
+#endif
+#ifdef UART3_RBR
+DECL_BFIN_UART(3)
+#endif
+
+__weak struct serial_device *default_serial_console(void)
+{
+#if CONFIG_UART_CONSOLE == 0
+	return &bfin_serial0_device;
+#elif CONFIG_UART_CONSOLE == 1
+	return &bfin_serial1_device;
+#elif CONFIG_UART_CONSOLE == 2
+	return &bfin_serial2_device;
+#elif CONFIG_UART_CONSOLE == 3
+	return &bfin_serial3_device;
+#endif
+}
+
+void bfin_serial_initialize(void)
+{
+#ifdef UART0_RBR
+	serial_register(&bfin_serial0_device);
+#endif
+#ifdef UART1_RBR
+	serial_register(&bfin_serial1_device);
+#endif
+#ifdef UART2_RBR
+	serial_register(&bfin_serial2_device);
+#endif
+#ifdef UART3_RBR
+	serial_register(&bfin_serial3_device);
+#endif
+}
+
+#ifdef CONFIG_DEBUG_EARLY_SERIAL
+inline void uart_early_putc(uint32_t uart_base, const char c)
+{
+	/* send a \r for compatibility */
+	if (c == '\n')
+		uart_early_putc(uart_base, '\r');
+
+	/* wait for the hardware fifo to clear up */
+	while (!(_lsr_read(pUART) & THRE))
+		continue;
+
+	/* queue the character for transmission */
+	bfin_write(&pUART->thr, c);
+	SSYNC();
+}
+
+void uart_early_puts(const char *s)
+{
+	while (*s)
+		uart_early_putc(UART_BASE, *s++);
+}
+
+/* Symbol for our assembly to call. */
+void _serial_early_set_baud(uint32_t baud)
+{
+	serial_early_set_baud(UART_BASE, baud);
+}
+
+/* Symbol for our assembly to call. */
+void _serial_early_init(void)
+{
+	serial_early_init(UART_BASE);
+}
+#endif
+
+#elif defined(CONFIG_UART_MEM)
+
+char serial_logbuf[CONFIG_UART_MEM];
+char *serial_logbuf_head = serial_logbuf;
+
+int serial_mem_init(void)
+{
+	serial_logbuf_head = serial_logbuf;
+	return 0;
+}
+
+void serial_mem_setbrg(void)
+{
+}
+
+int serial_mem_tstc(void)
+{
+	return 0;
+}
+
+int serial_mem_getc(void)
+{
+	return 0;
+}
+
+void serial_mem_putc(const char c)
+{
+	*serial_logbuf_head = c;
+	if (++serial_logbuf_head == serial_logbuf + CONFIG_UART_MEM)
+		serial_logbuf_head = serial_logbuf;
+}
+
+void serial_mem_puts(const char *s)
+{
+	while (*s)
+		serial_putc(*s++);
+}
+
+struct serial_device bfin_serial_mem_device = {
+	.name   = "bfin_uart_mem",
+	.start  = serial_mem_init,
+	.setbrg = serial_mem_setbrg,
+	.getc   = serial_mem_getc,
+	.tstc   = serial_mem_tstc,
+	.putc   = serial_mem_putc,
+	.puts   = serial_mem_puts,
+};
+
+
+__weak struct serial_device *default_serial_console(void)
+{
+	return &bfin_serial_mem_device;
+}
+
+void bfin_serial_initialize(void)
+{
+	serial_register(&bfin_serial_mem_device);
+}
+#endif /* CONFIG_UART_MEM */
diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c
index ab2e8b9..a9a4d92 100644
--- a/drivers/spi/bfin_spi.c
+++ b/drivers/spi/bfin_spi.c
@@ -13,7 +13,6 @@
 #include <spi.h>
 
 #include <asm/blackfin.h>
-#include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/portmux.h>
 #include <asm/mach-common/bits/spi.h>
@@ -242,109 +241,15 @@ void spi_release_bus(struct spi_slave *slave)
 	SSYNC();
 }
 
-#ifdef __ADSPBF54x__
-# define SPI_DMA_BASE DMA4_NEXT_DESC_PTR
-#elif defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) || \
-      defined(__ADSPBF538__) || defined(__ADSPBF539__)
-# define SPI_DMA_BASE DMA5_NEXT_DESC_PTR
-#elif defined(__ADSPBF561__)
-# define SPI_DMA_BASE DMA2_4_NEXT_DESC_PTR
-#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) || \
-      defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
-# define SPI_DMA_BASE DMA7_NEXT_DESC_PTR
-# elif defined(__ADSPBF50x__)
-# define SPI_DMA_BASE DMA6_NEXT_DESC_PTR
-#else
-# error "Please provide SPI DMA channel defines"
-#endif
-static volatile struct dma_register *dma = (void *)SPI_DMA_BASE;
-
 #ifndef CONFIG_BFIN_SPI_IDLE_VAL
 # define CONFIG_BFIN_SPI_IDLE_VAL 0xff
 #endif
 
-#ifdef CONFIG_BFIN_SPI_NO_DMA
-# define SPI_DMA 0
-#else
-# define SPI_DMA 1
-#endif
-
-static int spi_dma_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx,
-			uint bytes)
-{
-	int ret = -1;
-	u16 ndsize, spi_config, dma_config;
-	struct dmasg dmasg[2];
-	const u8 *buf;
-
-	if (tx) {
-		debug("%s: doing half duplex TX\n", __func__);
-		buf = tx;
-		spi_config = TDBR_DMA;
-		dma_config = 0;
-	} else {
-		debug("%s: doing half duplex RX\n", __func__);
-		buf = rx;
-		spi_config = RDBR_DMA;
-		dma_config = WNR;
-	}
-
-	dmasg[0].start_addr = (unsigned long)buf;
-	dmasg[0].x_modify = 1;
-	dma_config |= WDSIZE_8 | DMAEN;
-	if (bytes <= 65536) {
-		blackfin_dcache_flush_invalidate_range(buf, buf + bytes);
-		ndsize = NDSIZE_5;
-		dmasg[0].cfg = NDSIZE_0 | dma_config | FLOW_STOP | DI_EN;
-		dmasg[0].x_count = bytes;
-	} else {
-		blackfin_dcache_flush_invalidate_range(buf, buf + 65536 - 1);
-		ndsize = NDSIZE_7;
-		dmasg[0].cfg = NDSIZE_5 | dma_config | FLOW_ARRAY | DMA2D;
-		dmasg[0].x_count = 0;	/* 2^16 */
-		dmasg[0].y_count = bytes >> 16;	/* count / 2^16 */
-		dmasg[0].y_modify = 1;
-		dmasg[1].start_addr = (unsigned long)(buf + (bytes & ~0xFFFF));
-		dmasg[1].cfg = NDSIZE_0 | dma_config | FLOW_STOP | DI_EN;
-		dmasg[1].x_count = bytes & 0xFFFF; /* count % 2^16 */
-		dmasg[1].x_modify = 1;
-	}
-
-	dma->cfg = 0;
-	dma->irq_status = DMA_DONE | DMA_ERR;
-	dma->curr_desc_ptr = dmasg;
-	write_SPI_CTL(bss, (bss->ctl & ~TDBR_CORE));
-	write_SPI_STAT(bss, -1);
-	SSYNC();
-
-	write_SPI_TDBR(bss, CONFIG_BFIN_SPI_IDLE_VAL);
-	dma->cfg = ndsize | FLOW_ARRAY | DMAEN;
-	write_SPI_CTL(bss, (bss->ctl & ~TDBR_CORE) | spi_config);
-	SSYNC();
-
-	/*
-	 * We already invalidated the first 64k,
-	 * now while we just wait invalidate the remaining part.
-	 * Its not likely that the DMA is going to overtake
-	 */
-	if (bytes > 65536)
-		blackfin_dcache_flush_invalidate_range(buf + 65536, buf + bytes);
-
-	while (!(dma->irq_status & DMA_DONE))
-		if (ctrlc())
-			goto done;
-
-	dma->cfg = 0;
-
-	ret = 0;
- done:
-	write_SPI_CTL(bss, bss->ctl);
-	return ret;
-}
-
 static int spi_pio_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx,
 			uint bytes)
 {
+	/* discard invalid data and clear RXS */
+	read_SPI_RDBR(bss);
 	/* todo: take advantage of hardware fifos  */
 	while (bytes--) {
 		u8 value = (tx ? *tx++ : CONFIG_BFIN_SPI_IDLE_VAL);
@@ -393,11 +298,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	if (flags & SPI_XFER_BEGIN)
 		spi_cs_activate(slave);
 
-	/* TX DMA doesn't work quite right */
-	if (SPI_DMA && bytes > 6 && (!tx /*|| !rx*/))
-		ret = spi_dma_xfer(bss, tx, rx, bytes);
-	else
-		ret = spi_pio_xfer(bss, tx, rx, bytes);
+	ret = spi_pio_xfer(bss, tx, rx, bytes);
 
  done:
 	if (flags & SPI_XFER_END)
diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
index fd8f8a7..685702e 100644
--- a/drivers/usb/eth/smsc95xx.c
+++ b/drivers/usb/eth/smsc95xx.c
@@ -798,6 +798,7 @@ struct smsc95xx_dongle {
 static const struct smsc95xx_dongle smsc95xx_dongles[] = {
 	{ 0x0424, 0xec00 },	/* LAN9512/LAN9514 Ethernet */
 	{ 0x0424, 0x9500 },	/* LAN9500 Ethernet */
+	{ 0x0424, 0x9730 },	/* LAN9730 Ethernet (HSIC) */
 	{ 0x0000, 0x0000 }	/* END - Do not remove */
 };
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c816878..e0f3e4b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -122,6 +122,31 @@ static struct descriptor {
 #define ehci_is_TDI()	(0)
 #endif
 
+int __ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
+{
+	return PORTSC_PSPD(reg);
+}
+
+int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
+	__attribute__((weak, alias("__ehci_get_port_speed")));
+
+void __ehci_set_usbmode(int index)
+{
+	uint32_t tmp;
+	uint32_t *reg_ptr;
+
+	reg_ptr = (uint32_t *)((u8 *)&ehcic[index].hcor->or_usbcmd + USBMODE);
+	tmp = ehci_readl(reg_ptr);
+	tmp |= USBMODE_CM_HC;
+#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
+	tmp |= USBMODE_BE;
+#endif
+	ehci_writel(reg_ptr, tmp);
+}
+
+void ehci_set_usbmode(int index)
+	__attribute__((weak, alias("__ehci_set_usbmode")));
+
 void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
 {
 	mdelay(50);
@@ -149,8 +174,6 @@ static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec)
 static int ehci_reset(int index)
 {
 	uint32_t cmd;
-	uint32_t tmp;
-	uint32_t *reg_ptr;
 	int ret = 0;
 
 	cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
@@ -163,15 +186,8 @@ static int ehci_reset(int index)
 		goto out;
 	}
 
-	if (ehci_is_TDI()) {
-		reg_ptr = (uint32_t *)((u8 *)ehcic[index].hcor + USBMODE);
-		tmp = ehci_readl(reg_ptr);
-		tmp |= USBMODE_CM_HC;
-#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
-		tmp |= USBMODE_BE;
-#endif
-		ehci_writel(reg_ptr, tmp);
-	}
+	if (ehci_is_TDI())
+		ehci_set_usbmode(index);
 
 #ifdef CONFIG_USB_EHCI_TXFIFO_THRESH
 	cmd = ehci_readl(&ehcic[index].hcor->or_txfilltuning);
@@ -587,16 +603,6 @@ fail:
 	return -1;
 }
 
-static inline int min3(int a, int b, int c)
-{
-
-	if (b < a)
-		a = b;
-	if (c < a)
-		a = c;
-	return a;
-}
-
 int
 ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 		 int length, struct devrequest *req)
@@ -607,15 +613,14 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 	int len, srclen;
 	uint32_t reg;
 	uint32_t *status_reg;
+	int port = le16_to_cpu(req->index) & 0xff;
 	struct ehci_ctrl *ctrl = dev->controller;
 
-	if (le16_to_cpu(req->index) > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
-		printf("The request port(%d) is not configured\n",
-			le16_to_cpu(req->index) - 1);
+	if (port > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
+		printf("The request port(%d) is not configured\n", port - 1);
 		return -1;
 	}
-	status_reg = (uint32_t *)&ctrl->hcor->or_portsc[
-						le16_to_cpu(req->index) - 1];
+	status_reg = (uint32_t *)&ctrl->hcor->or_portsc[port - 1];
 	srclen = 0;
 
 	debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
@@ -711,7 +716,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 			tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
 
 		if (ehci_is_TDI()) {
-			switch (PORTSC_PSPD(reg)) {
+			switch (ehci_get_port_speed(ctrl->hcor, reg)) {
 			case PORTSC_PSPD_FS:
 				break;
 			case PORTSC_PSPD_LS:
@@ -732,7 +737,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 			tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
 		if (reg & EHCI_PS_OCC)
 			tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
-		if (ctrl->portreset & (1 << le16_to_cpu(req->index)))
+		if (ctrl->portreset & (1 << port))
 			tmpbuf[2] |= USB_PORT_STAT_C_RESET;
 
 		srcptr = tmpbuf;
@@ -758,7 +763,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 			    EHCI_PS_IS_LOWSPEED(reg)) {
 				/* Low speed device, give up ownership. */
 				debug("port %d low speed --> companion\n",
-				      req->index - 1);
+				      port - 1);
 				reg |= EHCI_PS_PO;
 				ehci_writel(status_reg, reg);
 				break;
@@ -784,13 +789,17 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 				ret = handshake(status_reg, EHCI_PS_PR, 0,
 						2 * 1000);
 				if (!ret)
-					ctrl->portreset |=
-						1 << le16_to_cpu(req->index);
+					ctrl->portreset |= 1 << port;
 				else
 					printf("port(%d) reset error\n",
-					le16_to_cpu(req->index) - 1);
+					       port - 1);
 			}
 			break;
+		case USB_PORT_FEAT_TEST:
+			reg &= ~(0xf << 16);
+			reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16;
+			ehci_writel(status_reg, reg);
+			break;
 		default:
 			debug("unknown feature %x\n", le16_to_cpu(req->value));
 			goto unknown;
@@ -817,7 +826,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 			reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
 			break;
 		case USB_PORT_FEAT_C_RESET:
-			ctrl->portreset &= ~(1 << le16_to_cpu(req->index));
+			ctrl->portreset &= ~(1 << port);
 			break;
 		default:
 			debug("unknown feature %x\n", le16_to_cpu(req->value));
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 086cd0f..2060a3e 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -60,7 +60,7 @@ int usb_cpu_init(void)
 	writel(1 << ATMEL_ID_UHP, &pmc->pcer);
 #endif
 
-#ifdef CONFIG_AT91SAM9261
+#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
 	writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer);
 #else
 	writel(ATMEL_PMC_UHP, &pmc->scer);
@@ -80,7 +80,7 @@ int usb_cpu_stop(void)
 	writel(1 << ATMEL_ID_UHP, &pmc->pcdr);
 #endif
 
-#ifdef CONFIG_AT91SAM9261
+#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
 	writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr);
 #else
 	writel(ATMEL_PMC_UHP, &pmc->scdr);
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 13e7c37..d57578d 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -33,6 +33,7 @@ endif
 COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
 COBJS-$(CONFIG_S5P)               += s5p_wdt.o
 COBJS-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
+COBJS-$(CONFIG_BFIN_WATCHDOG)  += bfin_wdt.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
new file mode 100644
index 0000000..7a6756b
--- /dev/null
+++ b/drivers/watchdog/bfin_wdt.c
@@ -0,0 +1,26 @@
+/*
+ * watchdog.c - driver for Blackfin on-chip watchdog
+ *
+ * Copyright (c) 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/watchdog.h>
+
+void hw_watchdog_reset(void)
+{
+	bfin_write_WDOG_STAT(0);
+}
+
+void hw_watchdog_init(void)
+{
+	bfin_write_WDOG_CTL(WDDIS);
+	SSYNC();
+	bfin_write_WDOG_CNT(CONFIG_WATCHDOG_TIMEOUT_MSECS / 1000 * get_sclk());
+	hw_watchdog_reset();
+	bfin_write_WDOG_CTL(WDEN);
+}