summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorMike Dunn <mikedunn@newsguy.com>2013-04-12 11:59:15 -0700
committerMarek Vasut <marex@denx.de>2013-05-05 23:47:05 +0200
commite0e89e236f9692eb0af034c59607e2db2e333c1d (patch)
treedab4925c8d6bb5b85a8bbcf02ea16aaea9453856 /drivers
parent86e929e8252c9b2a6e74a9d53c9ef8a9d5353602 (diff)
downloadu-boot-imx-e0e89e236f9692eb0af034c59607e2db2e333c1d.zip
u-boot-imx-e0e89e236f9692eb0af034c59607e2db2e333c1d.tar.gz
u-boot-imx-e0e89e236f9692eb0af034c59607e2db2e333c1d.tar.bz2
pxa27x_udc: remove call to unimplemented set_GPIO_mode()
If CONFIG_USB_DEV_PULLUP_GPIO is defined, a link error occurs because the set_GPIO_mode() helper function is not implemented. This function doesn't do much except make the code a little more readable, so I just manually coded its equivalent and removed the prototype from the header file. It is invoked no where else in the code. While I was at it, I noticed that two other function prototypes in the same header file are also neither implemented nor invoked anywhere, so I removed them as well. Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c4
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 4c00081..71cc0f2 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -610,7 +610,9 @@ void udc_connect(void)
#ifdef CONFIG_USB_DEV_PULLUP_GPIO
/* Turn on the USB connection by enabling the pullup resistor */
- set_GPIO_mode(CONFIG_USB_DEV_PULLUP_GPIO | GPIO_OUT);
+ writel(readl(GPDR(CONFIG_USB_DEV_PULLUP_GPIO))
+ | GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO),
+ GPDR(CONFIG_USB_DEV_PULLUP_GPIO));
writel(GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO), GPSR(CONFIG_USB_DEV_PULLUP_GPIO));
#else
/* Host port 2 transceiver D+ pull up enable */