summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorKuo-Jung Su <dantesu@faraday-tech.com>2013-05-07 14:33:31 +0800
committerJoe Hershberger <joe.hershberger@ni.com>2013-06-24 19:11:16 -0500
commitc4775476d211a4be027e45c14ef961de7312d5f6 (patch)
treebee7a7f5ac8f35acfd7e0f34091d4b04ac9a5e46 /drivers
parent42a7cb50a96e95cdca26607727c6767876414ced (diff)
downloadu-boot-imx-c4775476d211a4be027e45c14ef961de7312d5f6.zip
u-boot-imx-c4775476d211a4be027e45c14ef961de7312d5f6.tar.gz
u-boot-imx-c4775476d211a4be027e45c14ef961de7312d5f6.tar.bz2
net: add Faraday FTMAC110 10/100Mbps ethernet support
Faraday FTMAC110 10/100Mbps supports half-word data transfer for Linux. However it has a weird DMA alignment issue: (1) Tx DMA Buffer Address: 1 bytes aligned: Invalid 2 bytes aligned: O.K 4 bytes aligned: O.K (2) Rx DMA Buffer Address: 1 bytes aligned: Invalid 2 bytes aligned: O.K 4 bytes aligned: Invalid!!! Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Tom Rini <trini@ti.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/ftmac110.c473
-rw-r--r--drivers/net/ftmac110.h177
3 files changed, 651 insertions, 0 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 1197f9a..9cf2983 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -46,6 +46,7 @@ COBJS-$(CONFIG_ETHOC) += ethoc.o
COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
COBJS-$(CONFIG_FTGMAC100) += ftgmac100.o
+COBJS-$(CONFIG_FTMAC110) += ftmac110.o
COBJS-$(CONFIG_FTMAC100) += ftmac100.o
COBJS-$(CONFIG_GRETH) += greth.o
COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
diff --git a/drivers/net/ftmac110.c b/drivers/net/ftmac110.c
new file mode 100644
index 0000000..579dcc7
--- /dev/null
+++ b/drivers/net/ftmac110.c
@@ -0,0 +1,473 @@
+/*
+ * Faraday 10/100Mbps Ethernet Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/dma-mapping.h>
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+#endif
+
+#include "ftmac110.h"
+
+#define CFG_RXDES_NUM 8
+#define CFG_TXDES_NUM 2
+#define CFG_XBUF_SIZE 1536
+
+#define CFG_MDIORD_TIMEOUT (CONFIG_SYS_HZ >> 1) /* 500 ms */
+#define CFG_MDIOWR_TIMEOUT (CONFIG_SYS_HZ >> 1) /* 500 ms */
+#define CFG_LINKUP_TIMEOUT (CONFIG_SYS_HZ << 2) /* 4 sec */
+
+/*
+ * FTMAC110 DMA design issue
+ *
+ * Its DMA engine has a weird restriction that its Rx DMA engine
+ * accepts only 16-bits aligned address, 32-bits aligned is not
+ * acceptable. However this restriction does not apply to Tx DMA.
+ *
+ * Conclusion:
+ * (1) Tx DMA Buffer Address:
+ * 1 bytes aligned: Invalid
+ * 2 bytes aligned: O.K
+ * 4 bytes aligned: O.K (-> u-boot ZeroCopy is possible)
+ * (2) Rx DMA Buffer Address:
+ * 1 bytes aligned: Invalid
+ * 2 bytes aligned: O.K
+ * 4 bytes aligned: Invalid
+ */
+
+struct ftmac110_chip {
+ void __iomem *regs;
+ uint32_t imr;
+ uint32_t maccr;
+ uint32_t lnkup;
+ uint32_t phy_addr;
+
+ struct ftmac110_rxd *rxd;
+ ulong rxd_dma;
+ uint32_t rxd_idx;
+
+ struct ftmac110_txd *txd;
+ ulong txd_dma;
+ uint32_t txd_idx;
+};
+
+static int ftmac110_reset(struct eth_device *dev);
+
+static uint16_t mdio_read(struct eth_device *dev,
+ uint8_t phyaddr, uint8_t phyreg)
+{
+ struct ftmac110_chip *chip = dev->priv;
+ struct ftmac110_regs __iomem *regs = chip->regs;
+ uint32_t tmp, ts;
+ uint16_t ret = 0xffff;
+
+ tmp = PHYCR_READ
+ | (phyaddr << PHYCR_ADDR_SHIFT)
+ | (phyreg << PHYCR_REG_SHIFT);
+
+ writel(tmp, &regs->phycr);
+
+ for (ts = get_timer(0); get_timer(ts) < CFG_MDIORD_TIMEOUT; ) {
+ tmp = readl(&regs->phycr);
+ if (tmp & PHYCR_READ)
+ continue;
+ break;
+ }
+
+ if (tmp & PHYCR_READ)
+ printf("ftmac110: mdio read timeout\n");
+ else
+ ret = (uint16_t)(tmp & 0xffff);
+
+ return ret;
+}
+
+static void mdio_write(struct eth_device *dev,
+ uint8_t phyaddr, uint8_t phyreg, uint16_t phydata)
+{
+ struct ftmac110_chip *chip = dev->priv;
+ struct ftmac110_regs __iomem *regs = chip->regs;
+ uint32_t tmp, ts;
+
+ tmp = PHYCR_WRITE
+ | (phyaddr << PHYCR_ADDR_SHIFT)
+ | (phyreg << PHYCR_REG_SHIFT);
+
+ writel(phydata, &regs->phydr);
+ writel(tmp, &regs->phycr);
+
+ for (ts = get_timer(0); get_timer(ts) < CFG_MDIOWR_TIMEOUT; ) {
+ if (readl(&regs->phycr) & PHYCR_WRITE)
+ continue;
+ break;
+ }
+
+ if (readl(&regs->phycr) & PHYCR_WRITE)
+ printf("ftmac110: mdio write timeout\n");
+}
+
+static uint32_t ftmac110_phyqry(struct eth_device *dev)
+{
+ ulong ts;
+ uint32_t maccr;
+ uint16_t pa, tmp, bmsr, bmcr;
+ struct ftmac110_chip *chip = dev->priv;
+
+ /* Default = 100Mbps Full */
+ maccr = MACCR_100M | MACCR_FD;
+
+ /* 1. find the phy device */
+ for (pa = 0; pa < 32; ++pa) {
+ tmp = mdio_read(dev, pa, MII_PHYSID1);
+ if (tmp == 0xFFFF || tmp == 0x0000)
+ continue;
+ chip->phy_addr = pa;
+ break;
+ }
+ if (pa >= 32) {
+ puts("ftmac110: phy device not found!\n");
+ goto exit;
+ }
+
+ /* 2. wait until link-up & auto-negotiation complete */
+ chip->lnkup = 0;
+ bmcr = mdio_read(dev, chip->phy_addr, MII_BMCR);
+ ts = get_timer(0);
+ do {
+ bmsr = mdio_read(dev, chip->phy_addr, MII_BMSR);
+ chip->lnkup = (bmsr & BMSR_LSTATUS) ? 1 : 0;
+ if (!chip->lnkup)
+ continue;
+ if (!(bmcr & BMCR_ANENABLE) || (bmsr & BMSR_ANEGCOMPLETE))
+ break;
+ } while (get_timer(ts) < CFG_LINKUP_TIMEOUT);
+ if (!chip->lnkup) {
+ puts("ftmac110: link down\n");
+ goto exit;
+ }
+ if (!(bmcr & BMCR_ANENABLE))
+ puts("ftmac110: auto negotiation disabled\n");
+ else if (!(bmsr & BMSR_ANEGCOMPLETE))
+ puts("ftmac110: auto negotiation timeout\n");
+
+ /* 3. derive MACCR */
+ if ((bmcr & BMCR_ANENABLE) && (bmsr & BMSR_ANEGCOMPLETE)) {
+ tmp = mdio_read(dev, chip->phy_addr, MII_ADVERTISE);
+ tmp &= mdio_read(dev, chip->phy_addr, MII_LPA);
+ if (tmp & LPA_100FULL) /* 100Mbps full-duplex */
+ maccr = MACCR_100M | MACCR_FD;
+ else if (tmp & LPA_100HALF) /* 100Mbps half-duplex */
+ maccr = MACCR_100M;
+ else if (tmp & LPA_10FULL) /* 10Mbps full-duplex */
+ maccr = MACCR_FD;
+ else if (tmp & LPA_10HALF) /* 10Mbps half-duplex */
+ maccr = 0;
+ } else {
+ if (bmcr & BMCR_SPEED100)
+ maccr = MACCR_100M;
+ else
+ maccr = 0;
+ if (bmcr & BMCR_FULLDPLX)
+ maccr |= MACCR_FD;
+ }
+
+exit:
+ printf("ftmac110: %d Mbps, %s\n",
+ (maccr & MACCR_100M) ? 100 : 10,
+ (maccr & MACCR_FD) ? "Full" : "half");
+ return maccr;
+}
+
+static int ftmac110_reset(struct eth_device *dev)
+{
+ uint8_t *a;
+ uint32_t i, maccr;
+ struct ftmac110_chip *chip = dev->priv;
+ struct ftmac110_regs __iomem *regs = chip->regs;
+
+ /* 1. MAC reset */
+ writel(MACCR_RESET, &regs->maccr);
+ for (i = get_timer(0); get_timer(i) < 1000; ) {
+ if (readl(&regs->maccr) & MACCR_RESET)
+ continue;
+ break;
+ }
+ if (readl(&regs->maccr) & MACCR_RESET) {
+ printf("ftmac110: reset failed\n");
+ return -ENXIO;
+ }
+
+ /* 1-1. Init tx ring */
+ for (i = 0; i < CFG_TXDES_NUM; ++i) {
+ /* owned by SW */
+ chip->txd[i].ct[0] = 0;
+ }
+ chip->txd_idx = 0;
+
+ /* 1-2. Init rx ring */
+ for (i = 0; i < CFG_RXDES_NUM; ++i) {
+ /* owned by HW */
+ chip->rxd[i].ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER);
+ }
+ chip->rxd_idx = 0;
+
+ /* 2. PHY status query */
+ maccr = ftmac110_phyqry(dev);
+
+ /* 3. Fix up the MACCR value */
+ chip->maccr = maccr | MACCR_CRCAPD | MACCR_RXALL | MACCR_RXRUNT
+ | MACCR_RXEN | MACCR_TXEN | MACCR_RXDMAEN | MACCR_TXDMAEN;
+
+ /* 4. MAC address setup */
+ a = dev->enetaddr;
+ writel(a[1] | (a[0] << 8), &regs->mac[0]);
+ writel(a[5] | (a[4] << 8) | (a[3] << 16)
+ | (a[2] << 24), &regs->mac[1]);
+
+ /* 5. MAC registers setup */
+ writel(chip->rxd_dma, &regs->rxba);
+ writel(chip->txd_dma, &regs->txba);
+ /* interrupt at each tx/rx */
+ writel(ITC_DEFAULT, &regs->itc);
+ /* no tx pool, rx poll = 1 normal cycle */
+ writel(APTC_DEFAULT, &regs->aptc);
+ /* rx threshold = [6/8 fifo, 2/8 fifo] */
+ writel(DBLAC_DEFAULT, &regs->dblac);
+ /* disable & clear all interrupt status */
+ chip->imr = 0;
+ writel(ISR_ALL, &regs->isr);
+ writel(chip->imr, &regs->imr);
+ /* enable mac */
+ writel(chip->maccr, &regs->maccr);
+
+ return 0;
+}
+
+static int ftmac110_probe(struct eth_device *dev, bd_t *bis)
+{
+ debug("ftmac110: probe\n");
+
+ if (ftmac110_reset(dev))
+ return -1;
+
+ return 0;
+}
+
+static void ftmac110_halt(struct eth_device *dev)
+{
+ struct ftmac110_chip *chip = dev->priv;
+ struct ftmac110_regs __iomem *regs = chip->regs;
+
+ writel(0, &regs->imr);
+ writel(0, &regs->maccr);
+
+ debug("ftmac110: halt\n");
+}
+
+static int ftmac110_send(struct eth_device *dev, void *pkt, int len)
+{
+ struct ftmac110_chip *chip = dev->priv;
+ struct ftmac110_regs __iomem *regs = chip->regs;
+ struct ftmac110_txd *des;
+
+ if (!chip->lnkup)
+ return 0;
+
+ if (len <= 0 || len > CFG_XBUF_SIZE) {
+ printf("ftmac110: bad tx pkt len(%d)\n", len);
+ return 0;
+ }
+
+ len = max(60, len);
+
+ des = &chip->txd[chip->txd_idx];
+ if (le32_to_cpu(des->ct[0]) & FTMAC110_TXCT0_OWNER) {
+ /* kick-off Tx DMA */
+ writel(0xffffffff, &regs->txpd);
+ printf("ftmac110: out of txd\n");
+ return 0;
+ }
+
+ memcpy(des->vbuf, (void *)pkt, len);
+ dma_map_single(des->vbuf, len, DMA_TO_DEVICE);
+
+ /* update len, fts and lts */
+ des->ct[1] &= cpu_to_le32(FTMAC110_TXCT1_END);
+ des->ct[1] |= cpu_to_le32(FTMAC110_TXCT1_LEN(len)
+ | FTMAC110_TXCT1_FTS | FTMAC110_TXCT1_LTS);
+
+ /* set owner bit and clear others */
+ des->ct[0] = cpu_to_le32(FTMAC110_TXCT0_OWNER);
+
+ /* kick-off Tx DMA */
+ writel(0xffffffff, &regs->txpd);
+
+ chip->txd_idx = (chip->txd_idx + 1) % CFG_TXDES_NUM;
+
+ return len;
+}
+
+static int ftmac110_recv(struct eth_device *dev)
+{
+ struct ftmac110_chip *chip = dev->priv;
+ struct ftmac110_rxd *des;
+ uint32_t ct0, len, rlen = 0;
+ uint8_t *buf;
+
+ if (!chip->lnkup)
+ return 0;
+
+ do {
+ des = &chip->rxd[chip->rxd_idx];
+ ct0 = le32_to_cpu(des->ct[0]);
+ if (ct0 & FTMAC110_RXCT0_OWNER)
+ break;
+
+ len = FTMAC110_RXCT0_LEN(ct0);
+ buf = des->vbuf;
+
+ if (ct0 & FTMAC110_RXCT0_ERRMASK) {
+ printf("ftmac110: rx error\n");
+ } else {
+ dma_map_single(buf, len, DMA_FROM_DEVICE);
+ NetReceive(buf, len);
+ rlen += len;
+ }
+
+ /* owned by hardware */
+ des->ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER);
+
+ chip->rxd_idx = (chip->rxd_idx + 1) % CFG_RXDES_NUM;
+ } while (0);
+
+ return rlen;
+}
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+
+static int ftmac110_mdio_read(
+ const char *devname, uint8_t addr, uint8_t reg, uint16_t *value)
+{
+ int ret = 0;
+ struct eth_device *dev;
+
+ dev = eth_get_dev_by_name(devname);
+ if (dev == NULL) {
+ printf("%s: no such device\n", devname);
+ ret = -1;
+ } else {
+ *value = mdio_read(dev, addr, reg);
+ }
+
+ return ret;
+}
+
+static int ftmac110_mdio_write(
+ const char *devname, uint8_t addr, uint8_t reg, uint16_t value)
+{
+ int ret = 0;
+ struct eth_device *dev;
+
+ dev = eth_get_dev_by_name(devname);
+ if (dev == NULL) {
+ printf("%s: no such device\n", devname);
+ ret = -1;
+ } else {
+ mdio_write(dev, addr, reg, value);
+ }
+
+ return ret;
+}
+
+#endif /* #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) */
+
+int ftmac110_initialize(bd_t *bis)
+{
+ int i, card_nr = 0;
+ struct eth_device *dev;
+ struct ftmac110_chip *chip;
+
+ dev = malloc(sizeof(*dev) + sizeof(*chip));
+ if (dev == NULL) {
+ panic("ftmac110: out of memory 1\n");
+ return -1;
+ }
+ chip = (struct ftmac110_chip *)(dev + 1);
+ memset(dev, 0, sizeof(*dev) + sizeof(*chip));
+
+ sprintf(dev->name, "FTMAC110#%d", card_nr);
+
+ dev->iobase = CONFIG_FTMAC110_BASE;
+ chip->regs = (void __iomem *)dev->iobase;
+ dev->priv = chip;
+ dev->init = ftmac110_probe;
+ dev->halt = ftmac110_halt;
+ dev->send = ftmac110_send;
+ dev->recv = ftmac110_recv;
+
+ if (!eth_getenv_enetaddr_by_index("eth", card_nr, dev->enetaddr))
+ eth_random_enetaddr(dev->enetaddr);
+
+ /* allocate tx descriptors (it must be 16 bytes aligned) */
+ chip->txd = dma_alloc_coherent(
+ sizeof(struct ftmac110_txd) * CFG_TXDES_NUM, &chip->txd_dma);
+ if (!chip->txd)
+ panic("ftmac110: out of memory 3\n");
+ memset(chip->txd, 0,
+ sizeof(struct ftmac110_txd) * CFG_TXDES_NUM);
+ for (i = 0; i < CFG_TXDES_NUM; ++i) {
+ void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE);
+ if (!va)
+ panic("ftmac110: out of memory 4\n");
+ chip->txd[i].vbuf = va;
+ chip->txd[i].buf = cpu_to_le32(virt_to_phys(va));
+ chip->txd[i].ct[1] = 0;
+ chip->txd[i].ct[0] = 0; /* owned by SW */
+ }
+ chip->txd[i - 1].ct[1] |= cpu_to_le32(FTMAC110_TXCT1_END);
+ chip->txd_idx = 0;
+
+ /* allocate rx descriptors (it must be 16 bytes aligned) */
+ chip->rxd = dma_alloc_coherent(
+ sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM, &chip->rxd_dma);
+ if (!chip->rxd)
+ panic("ftmac110: out of memory 4\n");
+ memset((void *)chip->rxd, 0,
+ sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM);
+ for (i = 0; i < CFG_RXDES_NUM; ++i) {
+ void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE + 2);
+ if (!va)
+ panic("ftmac110: out of memory 5\n");
+ /* it needs to be exactly 2 bytes aligned */
+ va = ((uint8_t *)va + 2);
+ chip->rxd[i].vbuf = va;
+ chip->rxd[i].buf = cpu_to_le32(virt_to_phys(va));
+ chip->rxd[i].ct[1] = cpu_to_le32(CFG_XBUF_SIZE);
+ chip->rxd[i].ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER);
+ }
+ chip->rxd[i - 1].ct[1] |= cpu_to_le32(FTMAC110_RXCT1_END);
+ chip->rxd_idx = 0;
+
+ eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ miiphy_register(dev->name, ftmac110_mdio_read, ftmac110_mdio_write);
+#endif
+
+ card_nr++;
+
+ return card_nr;
+}
diff --git a/drivers/net/ftmac110.h b/drivers/net/ftmac110.h
new file mode 100644
index 0000000..5b2d23b
--- /dev/null
+++ b/drivers/net/ftmac110.h
@@ -0,0 +1,177 @@
+/*
+ * Faraday 10/100Mbps Ethernet Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _FTMAC110_H
+#define _FTMAC110_H
+
+struct ftmac110_regs {
+ uint32_t isr; /* 0x00: Interrups Status Register */
+ uint32_t imr; /* 0x04: Interrupt Mask Register */
+ uint32_t mac[2]; /* 0x08: MAC Address */
+ uint32_t mht[2]; /* 0x10: Multicast Hash Table Register */
+ uint32_t txpd; /* 0x18: Tx Poll Demand Register */
+ uint32_t rxpd; /* 0x1c: Rx Poll Demand Register */
+ uint32_t txba; /* 0x20: Tx Ring Base Address Register */
+ uint32_t rxba; /* 0x24: Rx Ring Base Address Register */
+ uint32_t itc; /* 0x28: Interrupt Timer Control Register */
+ uint32_t aptc; /* 0x2C: Automatic Polling Timer Control Register */
+ uint32_t dblac; /* 0x30: DMA Burst Length&Arbitration Control */
+ uint32_t revr; /* 0x34: Revision Register */
+ uint32_t fear; /* 0x38: Feature Register */
+ uint32_t rsvd[19];
+ uint32_t maccr; /* 0x88: MAC Control Register */
+ uint32_t macsr; /* 0x8C: MAC Status Register */
+ uint32_t phycr; /* 0x90: PHY Control Register */
+ uint32_t phydr; /* 0x94: PHY Data Register */
+ uint32_t fcr; /* 0x98: Flow Control Register */
+ uint32_t bpr; /* 0x9C: Back Pressure Register */
+};
+
+/*
+ * Interrupt status/mask register(ISR/IMR) bits
+ */
+#define ISR_ALL 0x3ff
+#define ISR_PHYSTCHG (1 << 9) /* phy status change */
+#define ISR_AHBERR (1 << 8) /* bus error */
+#define ISR_RXLOST (1 << 7) /* rx lost */
+#define ISR_RXFIFO (1 << 6) /* rx to fifo */
+#define ISR_TXLOST (1 << 5) /* tx lost */
+#define ISR_TXOK (1 << 4) /* tx to ethernet */
+#define ISR_NOTXBUF (1 << 3) /* out of tx buffer */
+#define ISR_TXFIFO (1 << 2) /* tx to fifo */
+#define ISR_NORXBUF (1 << 1) /* out of rx buffer */
+#define ISR_RXOK (1 << 0) /* rx to buffer */
+
+/*
+ * MACCR control bits
+ */
+#define MACCR_100M (1 << 18) /* 100Mbps mode */
+#define MACCR_RXBCST (1 << 17) /* rx broadcast packet */
+#define MACCR_RXMCST (1 << 16) /* rx multicast packet */
+#define MACCR_FD (1 << 15) /* full duplex */
+#define MACCR_CRCAPD (1 << 14) /* tx crc append */
+#define MACCR_RXALL (1 << 12) /* rx all packets */
+#define MACCR_RXFTL (1 << 11) /* rx packet even it's > 1518 byte */
+#define MACCR_RXRUNT (1 << 10) /* rx packet even it's < 64 byte */
+#define MACCR_RXMCSTHT (1 << 9) /* rx multicast hash table */
+#define MACCR_RXEN (1 << 8) /* rx enable */
+#define MACCR_RXINHDTX (1 << 6) /* rx in half duplex tx */
+#define MACCR_TXEN (1 << 5) /* tx enable */
+#define MACCR_CRCDIS (1 << 4) /* tx packet even it's crc error */
+#define MACCR_LOOPBACK (1 << 3) /* loop-back */
+#define MACCR_RESET (1 << 2) /* reset */
+#define MACCR_RXDMAEN (1 << 1) /* rx dma enable */
+#define MACCR_TXDMAEN (1 << 0) /* tx dma enable */
+
+/*
+ * PHYCR control bits
+ */
+#define PHYCR_READ (1 << 26)
+#define PHYCR_WRITE (1 << 27)
+#define PHYCR_REG_SHIFT 21
+#define PHYCR_ADDR_SHIFT 16
+
+/*
+ * ITC control bits
+ */
+
+/* Tx Cycle Length */
+#define ITC_TX_CYCLONG (1 << 15) /* 100Mbps=81.92us; 10Mbps=819.2us */
+#define ITC_TX_CYCNORM (0 << 15) /* 100Mbps=5.12us; 10Mbps=51.2us */
+/* Tx Threshold: Aggregate n interrupts as 1 interrupt */
+#define ITC_TX_THR(n) (((n) & 0x7) << 12)
+/* Tx Interrupt Timeout = n * Tx Cycle */
+#define ITC_TX_ITMO(n) (((n) & 0xf) << 8)
+/* Rx Cycle Length */
+#define ITC_RX_CYCLONG (1 << 7) /* 100Mbps=81.92us; 10Mbps=819.2us */
+#define ITC_RX_CYCNORM (0 << 7) /* 100Mbps=5.12us; 10Mbps=51.2us */
+/* Rx Threshold: Aggregate n interrupts as 1 interrupt */
+#define ITC_RX_THR(n) (((n) & 0x7) << 4)
+/* Rx Interrupt Timeout = n * Rx Cycle */
+#define ITC_RX_ITMO(n) (((n) & 0xf) << 0)
+
+#define ITC_DEFAULT \
+ (ITC_TX_THR(1) | ITC_TX_ITMO(0) | ITC_RX_THR(1) | ITC_RX_ITMO(0))
+
+/*
+ * APTC contrl bits
+ */
+
+/* Tx Cycle Length */
+#define APTC_TX_CYCLONG (1 << 12) /* 100Mbps=81.92us; 10Mbps=819.2us */
+#define APTC_TX_CYCNORM (0 << 12) /* 100Mbps=5.12us; 10Mbps=51.2us */
+/* Tx Poll Timeout = n * Tx Cycle, 0=No auto polling */
+#define APTC_TX_PTMO(n) (((n) & 0xf) << 8)
+/* Rx Cycle Length */
+#define APTC_RX_CYCLONG (1 << 4) /* 100Mbps=81.92us; 10Mbps=819.2us */
+#define APTC_RX_CYCNORM (0 << 4) /* 100Mbps=5.12us; 10Mbps=51.2us */
+/* Rx Poll Timeout = n * Rx Cycle, 0=No auto polling */
+#define APTC_RX_PTMO(n) (((n) & 0xf) << 0)
+
+#define APTC_DEFAULT (APTC_TX_PTMO(0) | APTC_RX_PTMO(1))
+
+/*
+ * DBLAC contrl bits
+ */
+#define DBLAC_BURST_MAX_ANY (0 << 14) /* un-limited */
+#define DBLAC_BURST_MAX_32X4 (2 << 14) /* max = 32 x 4 bytes */
+#define DBLAC_BURST_MAX_64X4 (3 << 14) /* max = 64 x 4 bytes */
+#define DBLAC_RXTHR_EN (1 << 9) /* enable rx threshold arbitration */
+#define DBLAC_RXTHR_HIGH(n) (((n) & 0x7) << 6) /* upper bound = n/8 fifo */
+#define DBLAC_RXTHR_LOW(n) (((n) & 0x7) << 3) /* lower bound = n/8 fifo */
+#define DBLAC_BURST_CAP16 (1 << 2) /* support burst 16 */
+#define DBLAC_BURST_CAP8 (1 << 1) /* support burst 8 */
+#define DBLAC_BURST_CAP4 (1 << 0) /* support burst 4 */
+
+#define DBLAC_DEFAULT \
+ (DBLAC_RXTHR_EN | DBLAC_RXTHR_HIGH(6) | DBLAC_RXTHR_LOW(2))
+
+/*
+ * descriptor structure
+ */
+struct ftmac110_rxd {
+ uint32_t ct[2];
+ uint32_t buf;
+ void *vbuf; /* reserved */
+};
+
+#define FTMAC110_RXCT0_OWNER BIT_MASK(31) /* owner: 1=HW, 0=SW */
+#define FTMAC110_RXCT0_FRS BIT_MASK(29) /* first pkt desc */
+#define FTMAC110_RXCT0_LRS BIT_MASK(28) /* last pkt desc */
+#define FTMAC110_RXCT0_ODDNB BIT_MASK(22) /* odd nibble */
+#define FTMAC110_RXCT0_RUNT BIT_MASK(21) /* runt pkt */
+#define FTMAC110_RXCT0_FTL BIT_MASK(20) /* frame too long */
+#define FTMAC110_RXCT0_CRC BIT_MASK(19) /* pkt crc error */
+#define FTMAC110_RXCT0_ERR BIT_MASK(18) /* bus error */
+#define FTMAC110_RXCT0_ERRMASK (0x1f << 18) /* all errors */
+#define FTMAC110_RXCT0_BCST BIT_MASK(17) /* Bcst pkt */
+#define FTMAC110_RXCT0_MCST BIT_MASK(16) /* Mcst pkt */
+#define FTMAC110_RXCT0_LEN(x) ((x) & 0x7ff)
+
+#define FTMAC110_RXCT1_END BIT_MASK(31)
+#define FTMAC110_RXCT1_BUFSZ(x) ((x) & 0x7ff)
+
+struct ftmac110_txd {
+ uint32_t ct[2];
+ uint32_t buf;
+ void *vbuf; /* reserved */
+};
+
+#define FTMAC110_TXCT0_OWNER BIT_MASK(31) /* owner: 1=HW, 0=SW */
+#define FTMAC110_TXCT0_COL 0x00000003 /* collision */
+
+#define FTMAC110_TXCT1_END BIT_MASK(31) /* end of ring */
+#define FTMAC110_TXCT1_TXIC BIT_MASK(30) /* tx done interrupt */
+#define FTMAC110_TXCT1_TX2FIC BIT_MASK(29) /* tx fifo interrupt */
+#define FTMAC110_TXCT1_FTS BIT_MASK(28) /* first pkt desc */
+#define FTMAC110_TXCT1_LTS BIT_MASK(27) /* last pkt desc */
+#define FTMAC110_TXCT1_LEN(x) ((x) & 0x7ff)
+
+#endif /* FTMAC110_H */