summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorSourav Poddar <sourav.poddar@ti.com>2013-12-21 12:50:10 +0530
committerJagannadha Sutradharudu Teki <jaganna@xilinx.com>2014-02-18 22:41:09 +0530
commitbb7cd0ddf978b96c40a4889608c9b9ea16127afa (patch)
tree6ab11c37a167dabf49b39c0edcde59292e6035c0 /drivers
parent570533b820fb4cc2bbe34c44001cc4c371617e37 (diff)
downloadu-boot-imx-bb7cd0ddf978b96c40a4889608c9b9ea16127afa.zip
u-boot-imx-bb7cd0ddf978b96c40a4889608c9b9ea16127afa.tar.gz
u-boot-imx-bb7cd0ddf978b96c40a4889608c9b9ea16127afa.tar.bz2
spi: ti_qspi: Add delay before xfer for am43xx
Without this delay, write/read is failing. Looks like, the WIP always remain set and hence a timeout occurs leading to the error. Without this patch, device does not get probed also. Here is the log. U-Boot# U-Boot# U-Boot# U-Boot# sf probe 0 SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff Failed to initialize SPI flash at 0:0 U-Boot# sf probe 0 While with this patch, log is U-Boot# sf probe 0 SF: Detected MX25L51235F with page size 256 Bytes, erase size 64 KiB, total 64 MiB, mapped at 30000000 U-Boot# sf erase 0 0x80000 SF: 524288 bytes @ 0x0 Erased: OK U-Boot# mw 81000000 0xdededede 0x40000 U-Boot# sf write 81000000 0 0x40000 SF: 262144 bytes @ 0x0 Written: OK U-Boot# sf read 82000000 0 0x40000 SF: 262144 bytes @ 0x0 Read: OK U-Boot# md 0x82000000 Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/spi/ti_qspi.c7
1 files changed, 7 insertions, 0 deletions
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index 5666250..dfa5d0c 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -285,6 +285,13 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
qslave->cmd |= QSPI_3_PIN;
qslave->cmd |= 0xfff;
+/* FIXME: This delay is required for successfull
+ * completion of read/write/erase. Once its root
+ * caused, it will be remove from the driver.
+ */
+#ifdef CONFIG_AM43XX
+ udelay(100);
+#endif
while (words--) {
if (txp) {
debug("tx cmd %08x dc %08x data %02x\n",